Search Results

Search found 16731 results on 670 pages for 'memory limit'.

Page 446/670 | < Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >

• Cheapest server to run Windows 2008 R2?

  - by chopps

  Hey Everyone, I want to build a really cheap server to use for testing etc but don't want to spend alot of dough. Any recomendations on what kind of home pc/server would work for these requirements? Any place to get refurbs at a good price? Component Requirement Processor Minimum: 1.4 GHz (x64 processor) Note: An Intel Itanium 2 processor is required for Windows Server 2008 for Itanium-Based Systems Memory Minimum: 512 MB RAM Maximum: 8 GB (Foundation) or 32 GB (Standard) or 2 TB (Enterprise, Datacenter, and Itanium-Based Systems) Disk Space Requirements Minimum: 32 GB or greater Foundation: 10 GB or greater Note: Computers with more than 16 GB of RAM will require more disk space for paging, hibernation, and dump files Display Super VGA (800 × 600) or higher resolution monitor Other DVD Drive, Keyboard and Microsoft Mouse (or compatible pointing device), Internet access (fees may apply)

  Read the article

• How can I restore Outlook 2007 from a PST file without having to import everything?

  - by schnapple

  I recently upgraded to Windows 7 and went the "format from scratch" route. I backed up my C:\ drive to the free space on my D:\ drive. So now I have Outlook 2007 reinstalled and I have my .pst files and so forth from the previous installation. If memory serves the answer on getting all those emails back into Outlook again is "create a new .pst file for the account and then reimport everything". What I'd like to do is be able to just put the .pst file where it's supposed to go and then have Outlook 2007 just "remember" everything. But I'm pretty sure this doesn't work. Is there a way to restore Outlook from a pst file without having to re-import everything?

  Read the article

• Eclipse: would more CPU cores with HyperThreading help increase speed?

  - by Dylan

  I'm programming a very large project in Eclipse. Right now I use a dual core machine with 2GB RAM, but Eclipse is sometimes busy for minutes (refreshing/indexing/building), so I'm upgrading to a new machine (with 16GB RAM and an SSD). Now I must choose between an Intel 2500K or an Intel 2600K that has HyperThreading. The price difference is about $100. Would that be worth it, for Eclipse, or is more memory/faster drive much more important for Eclipse ? Can Eclipse make use of the HyperThreading at all?

  Read the article

• Server hung with "blocked for more than 120 seconds", diskless

  - by alterpub

  I have server which hung every 2-5 days. dmesg show following situation: kernel: [490894.231753] INFO: task munin-html:10187 blocked for more than 120 seconds. kernel: [490894.231799] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kernel: [490894.231843] munin-html D 0000000000000000 0 10187 9796 0x00000000 kernel: [490894.231878] ffff88063174b968 0000000000000082 ffff88063174b8d8 0000000000015b80 kernel: [490894.231930] ffff88063174bfd8 0000000000015b80 ffff88063174bfd8 ffff88062fe644d0 kernel: [490894.231982] 0000000000015b80 0000000000015b80 ffff88063174bfd8 0000000000015b80 kernel: [490894.232033] Call Trace: kernel: [490894.232059] [<ffffffff8117fce0>] ? sync_buffer+0x0/0x50 kernel: [490894.232089] [<ffffffff815a1f13>] io_schedule+0x73/0xc0 kernel: [490894.232115] [<ffffffff8117fd25>] sync_buffer+0x45/0x50 kernel: [490894.232143] [<ffffffff815a258f>] __wait_on_bit+0x5f/0x90 kernel: [490894.232170] [<ffffffff8117fce0>] ? sync_buffer+0x0/0x50 kernel: [490894.232197] [<ffffffff815a2638>] out_of_line_wait_on_bit+0x78/0x90 kernel: [490894.232227] [<ffffffff81080250>] ? wake_bit_function+0x0/0x40 kernel: [490894.232255] [<ffffffff8117fcd6>] __wait_on_buffer+0x26/0x30 kernel: [490894.232288] [<ffffffffa00131be>] squashfs_read_data+0x1be/0x520 [squashfs] kernel: [490894.232320] [<ffffffff8114f0f1>] ? __mem_cgroup_try_charge+0x71/0x450 kernel: [490894.232350] [<ffffffffa0013963>] squashfs_cache_get+0x1c3/0x320 [squashfs] kernel: [490894.232381] [<ffffffffa00136eb>] ? squashfs_copy_data+0x10b/0x130 [squashfs] kernel: [490894.232426] [<ffffffff815a3dbe>] ? _raw_spin_lock+0xe/0x20 kernel: [490894.232454] [<ffffffffa0013b68>] ? squashfs_read_metadata+0x48/0xf0 [squashfs] kernel: [490894.232499] [<ffffffffa0013ae1>] squashfs_get_datablock+0x21/0x30 [squashfs] kernel: [490894.232544] [<ffffffffa0015026>] squashfs_readpage+0x436/0x4a0 [squashfs] kernel: [490894.232575] [<ffffffff8111a375>] ? __inc_zone_page_state+0x35/0x40 kernel: [490894.232606] [<ffffffff8110d072>] __do_page_cache_readahead+0x172/0x210 kernel: [490894.232636] [<ffffffff8110d131>] ra_submit+0x21/0x30 kernel: [490894.232662] [<ffffffff811045f3>] filemap_fault+0x3f3/0x450 kernel: [490894.232691] [<ffffffff812bd156>] ? prio_tree_insert+0x256/0x2b0 kernel: [490894.232726] [<ffffffffa009225d>] aufs_fault+0x11d/0x170 [aufs] kernel: [490894.232755] [<ffffffff8111f6d4>] __do_fault+0x54/0x560 kernel: [490894.232782] [<ffffffff81122f39>] handle_mm_fault+0x1b9/0x440 kernel: [490894.232811] [<ffffffff811286f5>] ? do_mmap_pgoff+0x335/0x380 kernel: [490894.232840] [<ffffffff815a7af5>] do_page_fault+0x125/0x350 kernel: [490894.232867] [<ffffffff815a4675>] page_fault+0x25/0x30 Os info cat /etc/issue.net Ubuntu 10.04.2 LTS uname -a Linux Shard1Host3 2.6.35-32-server #68~lucid1-Ubuntu SMP Wed Mar 28 18:33:00 UTC 2012 x86_64 GNU/Linux This system load via ltsp and hasn't harddrives also it has a lot of memory 24Gb. free -m total used free shared buffers cached Mem: 24152 17090 7061 0 50 494 -/+ buffers/cache: 16545 7607 Swap: 0 0 0 I put vmstat info here but I think it won't give results after reboot vmstat 1 30 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 7231156 52196 506400 0 0 0 0 172 143 7 0 92 0 1 0 0 7231024 52196 506400 0 0 0 0 7859 16233 5 0 94 0 0 0 0 7231024 52196 506400 0 0 0 0 7870 16446 2 0 98 0 0 0 0 7230900 52196 506400 0 0 0 0 7308 15661 5 0 95 0 0 0 0 7231100 52196 506400 0 0 0 0 7960 16543 6 0 94 0 0 0 0 7231100 52196 506400 0 0 0 0 7542 16047 5 1 94 0 3 0 0 7231100 52196 506400 0 0 0 0 7709 16621 3 0 96 0 0 0 0 7231220 52196 506400 0 0 0 0 7857 16552 4 0 96 0 0 0 0 7231220 52196 506400 0 0 0 0 7192 15491 6 0 94 0 0 0 0 7231220 52196 506400 0 0 0 0 7423 15792 5 1 94 0 1 0 0 7231260 52196 506404 0 0 0 0 7686 16296 2 0 98 0 0 0 0 7231260 52196 506404 0 0 0 0 6976 15183 5 0 95 0 0 0 0 7231260 52196 506404 0 0 0 0 7303 15600 4 0 95 0 0 0 0 7231320 52196 506404 0 0 0 0 7967 16241 1 0 98 0 0 0 0 7231444 52196 506404 0 0 0 0 6948 15113 6 0 94 0 0 0 0 7231444 52196 506404 0 0 0 0 7931 16181 6 0 94 0 1 0 0 7231516 52196 506404 0 0 0 0 7715 15829 6 0 94 0 0 0 0 7231516 52196 506404 0 0 0 0 7771 16036 2 0 97 0 0 0 0 7231268 52196 506404 0 0 0 0 7782 16202 6 0 94 0 1 0 0 7231212 52196 506404 0 0 0 0 7457 15622 4 0 96 0 0 0 0 7231212 52196 506404 0 0 0 0 7573 16045 2 0 98 0 2 0 0 7231216 52196 506404 0 0 0 0 7689 16076 6 0 94 0 0 0 0 7231424 52196 506404 0 0 0 0 7429 15650 4 0 95 0 3 0 0 7231424 52196 506404 0 0 0 0 7534 16168 3 0 97 0 1 0 0 7230548 52196 506404 0 0 0 0 8559 15926 7 1 92 0 0 0 0 7230672 52196 506404 0 0 0 0 7720 15905 2 0 98 0 0 0 0 7230548 52196 506404 0 0 0 0 7677 16313 5 0 95 0 1 0 0 7230676 52196 506404 0 0 0 0 7209 15432 5 0 95 0 0 0 0 7230800 52196 506404 0 0 0 0 7522 15861 2 0 98 0 0 0 0 7230552 52196 506404 0 0 0 0 7760 16661 5 0 95 0 In the munin(monitoring system) graphs I see(before server hung): Disk(nbd0) IOs per device: read: 289m but avg by week 2.09m Disk(nbd0) throughput per device: read: 4.73k but avg by week 108.76 Disk(nbd0) utilization per device: 100% but avg by week 1.2% Eth0 traffic was low: in/out only 2Mbps Number of threads increased to 566 usually 392 Fork rate 1.08 but usually 2.82 VMStat(processes state) Increased to 17.77(from 0 as far as I could see in the graph) CPU usage iowait 880.46% when usually 6.67% It'll be great if somebody help me to understand what's up.

  Read the article

• Shell script with ImageMagick: hangs forever?

  - by AP257

  I've generated a shell script that uses ImageMagick to convert and crop around 18000 images. Here's a sample entry (so there are 18000 of these): if [ ! -f ./cropped/16333-1.png ] then convert -crop 724x118+876+1989 ./lin/34.png ./cropped/16333-1.png echo cropping 16333-1 fi if [ ! -f ./cropped/16333-1_thumb.png ] then convert -define jpeg:size=400x100 ./cropped/16333-1.png -thumbnail '400x100>' -background transparent -gravity center -extent 400x100 ./cropped/16333-1_thumb.png echo thumbing 16333-1 fi The script only runs for about 2000 images before hanging forever. Am I missing something, or leaking memory somewhere? Thanks for your help!

  Read the article

• Can ECC registred RAM 512 MB DDR-400 be used on thinclients - specifically Neoware CA10/CA22?

  - by Ramaswami Murugan

  Can ECC registered RAM 512 MB DDR-400 be used on thin clients - specifically Neoware CA10/CA22? Neoware thin clients (now HP Thin clients e100/e140) have 2 slots for a max of 1 Gb of DDR-400 RAM (184 Pin PC3200). I notice that the price of ECC reg RAM is considerably less than that of non-reg RAM ($10 for ECC reg 512 MB vs $24 for non-ECC reg 512 MB) so this approach is worth it for me to upgrade my memory on numerous thin clients (approx 40). The BIOS is Phoenix E686 and the chipset is VIA 800MHz - 1 Ghz.

  Read the article

• EEE PC 701/4G Surf Internal Drive: Is it really SSD?

  - by Bart Silverstrim

  I have an old EEE PC with the 4 Gig internal drive. Everything I've read keeps saying it's an SSD drive; running lshw tells me that it's an ATA disk, Silicon Motion SM. The thing seems to be rather slow, though. I know it has a 900 Mhz Celeron processor and only 512 meg of RAM, but it seems like drive access is slow even for those specs. Does anyone know if it really has an SSD drive? I thought that compared to regular hard disks SSD's were blazing fast, and this feels like and acts like it's pulling from something more akin to an internal USB memory stick.

  Read the article

• Blue screen - BCCode: 7F

  - by Joe

  I've recently bought a refurbished Toshiba Satellite A660 11M and I get the blue screen of death appearing fairly frequently now, and I can't seem to work out why or how to prevent/cure it. Firstly I thought it was due to Zone Alarm from what I read on the net, but then I thought it was a memory issue after it crashed whilst I was running Memtest. But after I ran Memtest a second time, it completed without any errors... Here are my computer specs - Toshiba Satellite A660 11M 500 GB hard disk 4 GB RAM Windows 7 Premium Nvidia GeForce GT 330M and here is more info regarding the crashes I keep getting - Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.768.3 Locale ID: 2057 Additional information about the problem: BCCode: 7f BCP1: 0000000000000008 BCP2: 0000000080050033 BCP3: 00000000000006F8 BCP4: FFFFF80003040EC0 OS Version: 6_1_7600 Service Pack: 0_0 Product: 768_1

  Read the article

• Virtualization deployment for datacenter

  - by bogha

  Hi, my company is going to deploy an IT Infrastructure on a virtual platform, can you please help me with the following: 1- which one do you recommend, Cisco Unified computing system ( cisco + emc + vmware )or HP Blades( virtualization solution + HP Storage )? 2- i Need to install a DNS Server, Web server, cpanel for managing hosting packages and Microsoft layer of product for usingg in the corporate infrastructur ( active directory, Local DNS, Exchange server, DHCP, Global catalog ) what is the minimum requirments for these servers ( in terms of CPU and Memory ) . 3- what is the best way to implement a redundant solution in a virtual environment. thank you

  Read the article

• How to fetch a cpu status thought net-snmp

  - by Steve.DC.Tang

  I want to fetch a device's cpu and memory status thought net-snmp. I get my device's info with this command: snmpwalk -v 2c -c public 210.38.xxx.xxx system And I got this info: SNMPv2-MIB::sysDescr.0 = STRING: Ruijie High-density IPv6 10G Core Routing Switch(S8606) By Ruijie Network SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.4881.1.1.10.1.43 DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (1978814424) 229 days, 0:42:24.24 SNMPv2-MIB::sysContact.0 = STRING: SNMPv2-MIB::sysName.0 = STRING: S8606 SNMPv2-MIB::sysLocation.0 = STRING: SNMPv2-MIB::sysServices.0 = INTEGER: 7 Now I want to fetch the cpu status, and I search my question on Google, somebody offer a oid for query the cpu status: snmpwalk -v 2c -c public 210.38.xxx.xxx usageOfCPU But it doesn't worked : No log handling enabled - using stderr logging usageOfCPU: Unknown Object Identifier (Sub-id not found: (top) - usageOfCPU) Somebody told me some switch has its private MIB, and you can use it to see its CPU status, is that right? I hope someone can solve me question......

  Read the article

• How do I diagnose a HP Notebook which has hardware issues?

  - by Rob

  My HP DV6t-2300 recently crashed while using FLV Player. It wouldn't start up after this so I had to do a hardware reset (remove power sources, hold down power button ~15 seconds, put back power sources). After this it would turn on, but start up would freeze in Ubuntu, Windows 7, Ubuntu Recovery Mode, and various Linux Live CDs. The only successful way to boot was in Windows 7 Safe Mode. The HP Customer Service was very polite, but they are trying to blame it on a corrupt operating system which is clearly not the case (since I have tried 4 operating systems and none work). I am thinking it might be the GPU since 1) I was watching movies when it crashed and 2) Windows Safe Mode might not use the dedicated GPU. I already ran Memory and HDD tests and there were no detected errors. Any ideas of what's wrong, or suggestions for tests that I should run in safe mode? Should I try reinstalling Windows 7 to convince HP that it's not the OS?

  Read the article

• Creating a vm using Hyper-V causes the host of BSOD

  - by Arcass

  Hi, Problem description: When I try to create a virtual machine, the host bsod part way through the process. From the logs in lookes to fail/hang on the "Creating new VirtualDisckDriver with new VHD" step. The BSOD error code is SYSTEM_SERVICE_EXCEPTION : STOP:0x0000003B When the machine has finished restarting, it looks to have created the vhd and XML files for the vm but it isn't accessable. I have two server bothing behaving in exactly the same way, so I don't believe it's a hardware fault. Has anyone had a similar experince? How did you resolve the problem? NOTES Hardware: HP DL380 G6 BIOS : 2010.03.30 (14 Apr 2010) [Latest from HP website] Inter Hyperthreading: Disabled Intel Virtuazation Technology : Enabled No-Execute Memory Protection: Enabled Mem check reports no errors OS: Windows 2008 Sp2 x64bit fully updated regards Arcass

  Read the article

• What are some good methods to improve personal password management?

  - by danilo

  I want to improve my personal password management. I usually use secure passwords, but overuse them for too many different places. My questions: What methods do you use to create passwords, e.g. for different online sites/logins? What methods do you use to remember those passwords? Memory? Pen&Paper? Software storage? Is there some good way to store my passwords somewhere, so I can always have access to them when I need them (e.g. a webbased solution on my own server) but at the same way keep them away from unwanted access? Edit: Someone on another site mentioned http://passwordmaker.org/. Have you had any good or bad experiences with that software?

  Read the article

• AMD FX 8350 potentially overheating

  - by rhughes

  I am worried that my CPU is overheating when running at maximum capacity. I have not overclocked the machine. The machine often powers down after a couple of minutes of max CPU usage. I get the following events in the Event Log after the crash: Log Name: System Source: Microsoft-Windows-Kernel-Power Date: 11/10/2013 12:05:40 Event ID: 41 Task Category: (63) Level: Critical Keywords: (2) User: SYSTEM Computer: home-pc Description: The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly. What can I do to confirm this or further narrow down this issue? Due to the sudden nature of the crash, no MEMORY.DMP is created I believe. I am happy to post any extra information that is needed.

  Read the article

• Installing 2 DDR3 Sticks in MB with 4 Slots

  - by The Sasquatch

  Hey everyone, I just put together my first system that uses DDR3 memory. The motherboard I got is an ASUS M4A77T/USB3 and it has 4 DDR3 RAM slots. Looking in the manual for the MB it doesn't say anything about how to install the RAM as far as matching the pairs goes. I have 2 4GB sticks of RAM, and whether I put the sticks next to each other (of the 4 RAM slots, there are two blue ones next to each other and 2 black ones next to each other) or space them apart, The BIOS still shows that I have 8GB installed. I have been getting an IRQL_NOT_LESS_OR_EQUAL BSOD error, and have read in some other places that it could be hardware/RAM related. Does the RAM need to go in the A1, A2 slots (different colored but both A), or the A1 B1 slots? (A1 B1 are both the lovely blue color.) Any help would be awesome. THANKS!

  Read the article

• Will Software RAID And iSCSI Work For A SAN

  - by Justin

  I am looking for a SAN solution, but can't afford even entry level solutions. Basically, the SAN is for development and a proof of concept product. The performance doesn't have to be amazing, but needs to be functional. My buddy says we should just setup sotware RAID and software iSCSI in Linux. Essentially I have a spare server with dual Xeon processors, 4GB of memory, and (2) 500GB 7200RPM drives. It's a bit old but working. I am sure there is reason people don't do software RAID and iSCSI, but will performance be usable? Thinking of configuring the drives in RAID 0 (for performance).

  Read the article

• Lightweight monitoring for a Windows XP laptop

  - by kazanaki

  Hello I have a windows XP laptop in a remote location. I would like to have an overview for CPU/Memory statistics from a remote location. Monitoring a specific service (a Tomcat instance) would be nice but not essential. I have seen the monitoring solutions (Nagios, cacti e.t.c) and they are all very heavy. I do not want to install mysql, web server and other stuff like that on the laptop. I don't even need a web solution at all. It could just be a simple command line app with a server port and on my machine another GUI application would connect there (and not a web browser) Is there something like this available?

  Read the article

• Can't run Ubuntu from disc

  - by alex

  When I place the boot CD in my CD drive and boot from it, I get the Ubuntu menu. I have these options Try Ubuntu without any change to your computer Install Ubuntu Check disc for defects Test memory Boot from first hard disk I can use the cursor keys to select them, and I can push F1 for help etc. However, I can not select an option. I've highlighted the first and tried enter, space bar etc. I do have a KVM, so I plugged in a 2nd USB keyboard and tried it but no go either. I can push escape and then got to the prompt. Am I doing something wrong?

  Read the article

• Linux says a kernel module has an unknown symbol, but another loaded module provides it.

  - by raldi

  I'm trying to install a driver for a USB DAQ box, which annoyingly, I have to compile myself. I believe I've succeeded -- I have two .ko files: -rw-r--r-- 1 root root 45271 2010-03-18 21:24 advdrv_core.ko -rw-r--r-- 1 root root 24312 2010-03-18 21:24 usb4761.ko I was able to run insmod on the first without incident, but when I try on the second, I get a flood of messages: kernel: [686782.106547] usb4761: no symbol version for adv_process_info_check_event kernel: [686782.106555] usb4761: Unknown symbol adv_process_info_check_event kernel: [686782.106691] usb4761: no symbol version for advdrv_unregister_driver kernel: [686782.106695] usb4761: Unknown symbol advdrv_unregister_driver However, advdrv_core.ko provides these symbols. My kernel sure seems to have them in memory: # cat /proc/kallsyms | grep advdrv_unregister_driver f8d88504 r __ksymtab_advdrv_unregister_driver [advdrv_core] f8d888d2 r __kstrtab_advdrv_unregister_driver [advdrv_core] f8d885a4 r __kcrctab_advdrv_unregister_driver [advdrv_core] 086eb8fb a __crc_advdrv_unregister_driver [advdrv_core] f8d86e90 t advdrv_unregister_driver [advdrv_core] Why does my insmod claim they're unknown symbols?

  Read the article

• Slow Web Performance on two Windows 2008 R2 Terminal Servers

  - by Frank Owen

  We have two Windows 2008 R2 servers that we use for agents to log into to access our customers systems. Saturday morning we received complaints that on both servers the web is running horribly slow. This happens on all websites and the majority of the time the web site times out trying to load. Other users located at the same site but using their desktop machine do not see any issue. We have rebooted the boxes and checked settings and cannot find the cause. The CPU/Memory/Network/Disk Space use on the server is very low. I thought it might have been a MS update causing the issue but it appears the last update was applied in January. We have rebooted both boxes and I am in process of trying a different browser. Any ideas what could be causing this?

  Read the article

• CentOS default installation gave 60% disk space to tmpfs partition

  - by garconcn

  I installed a CentOS server which will be used for xen hypervisor. The server has two Intel(R) Xeon(R) CPU E5620 and 148G memory. The OS was installed on a 120G SSD drive. After the installation, I found that the tmpfs partition occupied about 60% of the drive. Even though I don't need much space for the OS, will there be any problem with 71G tmp partition? Thanks for any comment. [root@cloud ~]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/VolGroup00-LogVol00 55G 1.1G 51G 3% / /dev/sda1 99M 13M 82M 14% /boot tmpfs 71G 0 71G 0% /dev/shm

  Read the article

• low performance on HPC cluster (sge) when running multiple jobs

  - by Yotam

  O know this is a long-shot but I'm clueless here. I'm running several computer simulations on High Performance Computation cluster (HPC) of oracale grid engine (sge). A single job runs at a certain speed (roughly 80 steps per second) when I add jobs to the machine, at a certain treshhold, the speed is recuded by two. On one machine (I don't know the cpu kind) the treshold is 11 jobs for 16 cpu's. On another one with the same number and kind of cpu's , the treshold is 8. I thought at first that this is a memory issue but each job takes about 60MB - 100MB and I have 16GB of ram on each of those machine. Did any of you encountered such a problem? is there any way to analyz this? Thanks.

  Read the article

• Planning to buy a server with at least 48GB Ram, are the blades way to go?

  - by varchar1

  We're planning to host our website for the first time for ourselves. We have currently have a linode of 8 gigs and the memory is going up to 90% most of the time. So I want to move my website to my own server with huge RAM. So this will be first time to manage any physical hardware of a server. So I came across IBM's BladeCenter, found them interesting. So can I just buy the blade and run it? Or do I have to buy the chassis for sure? Also, do I need to buy an UPS? So how hard is it to setup? How about the hard drives? Can I setup them easily? Please advice.

  Read the article

• Which JMX statistics to watch out for in Catalina/Tomcat?

  - by geoaxis

  I have configured OpenNMS to collect all kinds of numeric data coming out of tomcat7 jmx. There are a lot of things. I am interested in monitoring this tomcat instance so that I can avoid down time and lockups. What metrics should I be watching out for? I am already monitoring things like CPU, Memory, Network via SNMP. With this JMX connection the things that I find interesting are Catalina:type=GlobalRequestProcessor,name="ajp-bio-/a.b.c.d-XXXX" RequestsCount so far. Catalina:type=Manager,context=/myApp,host=localhost Active sessions and its maximum so far

  Read the article

• Ubuntu: Is there a good tabbed PDF viewer?

  - by Frank

  Is there a good non-bloated PDF viewer for (Ubuntu) Linux that supports tabs? I don't want to use Acrobat Reader because it is slow and takes much memory, and my computer isn't the fastest. I know the alternative readers evince and foxit, but they don't support opening different PDF files in tabs. (foxit has that feature on Windows, but the Linux version 1.1, which I just tried, doesn't have it.) For evince, I know many people would like this functionality, but they get ridiculed by Ubuntu people (see here), who say that tabs are the task of a window manager. If that is the case, how can I put all evince windows into one in GNOME?

  Read the article

< Previous Page | 442 443 444 445 446 447 448 449 450 451 452 453  | Next Page >