Search Results

Search found 12944 results on 518 pages for 'desktop publishing'.

Page 452/518 | < Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >

  • Cooling Server Closet - No A/C Is Possible

    - by JamesCo
    We're moving into a new office in an old building in London (that's England :) and are walling off a 2m x 1.3m area where the router & telephone equipment currently terminates to use as a server closet. The closet will contain: 2 24-port switches 1 router 1 VSDL modem 1 Dell desktop 1 4-bay NAS 1 HP micro-server 1 UPS Miscellaneous minor telephony boxes. There is no central A/C in the office and there never will be. We can install ducting to the outside quite easily - it's only a couple of metres to the windows, which face a courtyard. My question is whether installing an extractor fan with ducting to the window should be sufficient for cooling? Would an intake fan and intake duct (from the window, too) be required? We don't want to leave a gap in the closet door as that'll let noise out into the office. If we don't have to put a portable A/C unit into the closet, that'd be perfect. The office has about 12 people; London is temperate, average maximum in August is 31 Celsius, 25 Celsius is more typical. The same equipment runs fine in our current office (same building as new office, also no A/C) but it isn't in an enclosed space. I can see us putting say one Dell 2950 tower server into the closet, but no more than that. So, sustained power consumption in the closet would currently be about 800w (I'm guessing); possibly in the future 2kw. The closet will have a ceiling and no windows and be well-insulated. We don't care if the equipment runs hot, so long as it runs and we don't hear it.

    Read the article

  • Connection Issue

    - by Karl Schneider
    Desktop computer, connected directly into a Comcast modem. Every so often, at seemingly random intervals, my connection will drop. This could be while in the middle of browsing, or when I'm not even at the computer. When the connection drops, the modem still shows 4 green lights. The modem is connected to a splitter (cable and internet in same room), and then directly to the wall. To recover from the problem, I am forced to restart my computer, at which point everything works fine again. I have tried an ipconfig/release and renew, it tells me that it is unable to contact the DHCP server, and thus can't renew. I have updated the NICs driver, no luck. I have changed the ethernet cord, no luck. I have had Comcast replace the modem, no luck. The only thing I can think of that hasn't been replaced is the cords connecting the modem to the wall and the splitter. Can anyone think of anything else I may be able to do to isolate what's causing the issue?

    Read the article

  • Setting up 802.1X wireless connection on OSX

    - by hizki
    I am an OSX user, I have Snow Leopard 10.6.5 and an updated AirPort (version 5.5.2). I am trying to connect to my university's wireless network, but it has a 802.1x security that I am having trouble defining... Here there are instructions for connecting with Windows XP, Windows 7 and Linux. Can someone please instruct me what should I do to set up this network on my Mac? I have had previous success in setting up this network, but I have no idea what I did that made it work. Since I updated my AirPort (to version 5.5.2) it worked only seldomly and very slowly... Before the update, even when it worked it never remembered my password. Update: I have already tried to create a new "location", removed all the 802.1x user profiles and all the remembered networks, and made sure the in the TCP/IP tab 'Configure IPv4' is set to "Using DHCP". I also moved /Library/Preferences/SystemConfiguration/preferences.plist to my desktop in attempt to force the system to create a new set of settings. Still I can define the connection to work.

    Read the article

  • Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

    - by Kairan
    Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

    Read the article

  • MsMpEng.exe (Windows Defender?) uses a lot of CPU at startup and runs two instances on a single core

    - by dlamblin
    I'm using Windows XP Professional SP2 on a single core AMD64 processor, and I've got two instances of MsMpEng.exe starting up when I start up and log in. They use 64MB and 32MB of ram and 140MB and 80MB of virtual memory, and fluctuate around 80% CPU usage for about 5 minutes at start up. They are (I read) associated with Windows Defender, but I'm concerned about: There's two of them, everything I read generally has only one reported. They might be scanning each other, and I want that to stop. They might be getting scanned by avgrsx.exe (AVG Free 8) (uses about 16Mb v ram) They might also be scanning moe.exe (assosciated with ms live mesh, which I'm considering getting rid of) Lastly I have Microsoft Security Essentials. I don't know the process name associated there. The main concern of mine (apart from the double instances) is that these are all trying to prioritize scanning each other at once except maybe moe.exe. This might seem legitimate but is likely a useless drain on resources. Have I made a mistake in having all of these installed, or is there a way to inform them not to do whatever they're doing that's taking about 5+ minutes at start up? [I also have Google Desktop, but I'm keeping that.] Comment if none of this makes sense to you.

    Read the article

  • With Ubuntu 9.10, my DVD keeps spinning up

    - by Ken
    I have Ubuntu 9.10 on my Intel Mac Mini. When there's a DVD in the drive, and even if there's no program open at all (just looking at the desktop), every minute or so the disc spins up with a loud whirring noise, and I can hear it cranking the motor to seek across the disc. How do I find out what's causing this? And how can I make it stop? Thanks! EDIT: I straced nautilus, and saw nothing it's doing directly, even when the disc spins up. It does poll inotify regularly, but I don't know how to trace what it's watching, or if that's even how it receives disc-inserted notifications. It doesn't call inotify_add_watch when I insert a disc or mount it (or eject or umount), but it could be watching all of /dev already or something like that. Of course, a DVD is mounted read-only, so whether it's inotify or something else, it should never need to poll anything on that. And if it is inotify, it's happening in the kernel, and the kernel should really never need to poll a device it's mounted to check for notifications.

    Read the article

  • Exchange 2010 POP3/IMAP4/Transport services complaining that they can't find SSL certificate after blue screen

    - by Graeme Donaldson
    We have a single-server Exchange 2010 setup. In the early hours of this morning the server had a blue screen and rebooted. After coming back up the POP3/IMAP4 and Transport services are complaining that they cannot find the correct SSL certificate for mail.example.com. POP3: Log Name: Application Source: MSExchangePOP3 Date: 2012/04/23 11:45:15 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. SSL or TLS encryption can't be made to the POP3 service. IMAP4: Log Name: Application Source: MSExchangeIMAP4 Date: 2012/04/23 08:30:44 AM Event ID: 2007 Task Category: (1) Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: A certificate for the host name "mail.example.com" couldn't be found. Neither SSL or TLS encryption can be made to the IMAP service. Transport: Log Name: Application Source: MSExchangeTransport Date: 2012/04/23 08:32:27 AM Event ID: 12014 Task Category: TransportService Level: Error Keywords: Classic User: N/A Computer: exch01.domain.local Description: Microsoft Exchange could not find a certificate that contains the domain name mail.example.com in the personal store on the local computer. Therefore, it is unable to support the STARTTLS SMTP verb for the connector Default EXCH01 with a FQDN parameter of mail.example.com. If the connector's FQDN is not specified, the computer's FQDN is used. Verify the connector configuration and the installed certificates to make sure that there is a certificate with a domain name for that FQDN. If this certificate exists, run Enable-ExchangeCertificate -Services SMTP to make sure that the Microsoft Exchange Transport service has access to the certificate key. The odd part is that Get-ExchangeCertificate show the cert as enabled for all the relevant services, and OWA is working flawlessly using this certificate. [PS] C:\Users\graeme\Desktop>Get-ExchangeCertificate Thumbprint Services Subject ---------- -------- ------- XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX ....S. CN=exch01 YYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYYY ....S. CN=exch01 ZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ IP.WS. CN=mail.example.com, OU=Domain Control Validated, O=mail.exa... Here's the certificate in the computer account's personal cert store: Does anyone have any pointers for getting POP3/IMAP4/SMTP to use the cert again?

    Read the article

  • How can I debug user mode driver failures in Windows 8

    - by Tom
    I have a 32 GB SD Card. Whenever I insert this card in to my newly upgraded Windows 8 laptop the OS stops responding normally. Metro Apps won't work. The system may or may not log in. Desktop apps may or may not be able to do things. When I remove the card and restart then all is fine. As soon as I put the card back in, the system starts misbehaving again. I've run Windows Update, so I have the latest drivers from Microsoft. This does not occur with the 8 GB cards I have. Unfortunately I only have one 32 GB card, so I can't test with others. From examining the system event log I've determined this is happening due to a user mode driver failure. How can I best debug this issue from here? How can I figure out which driver this is related to? Will there be a Dr. Watson crash dump somewhere? Details - System - Provider [ Name] Microsoft-Windows-DriverFrameworks-UserMode [ Guid] {2E35AAEB-857F-4BEB-A418-2E6C0E54D988} EventID 10110 Version 1 Level 1 Task 64 Opcode 0 Keywords 0x2000000000000000 - TimeCreated [ SystemTime] 2012-10-29T00:51:57.532718300Z EventRecordID 40417 Correlation - Execution [ ProcessID] 1056 [ ThreadID] 3796 Channel System Computer thebrain - Security [ UserID] S-1-5-18 - UserData - UMDFHostProblem [ lifetime] {811E3DC4-FBC6-420B-ABCC-AD7505A36F3B} - Problem [ code] 3 [ detectedBy] 2 ExitCode 3 - Operation [ code] 259 Message 72448 Status 4294967295 Edit 1 So I tried using Debug View from SysInternals (you can get it here: http://technet.microsoft.com/en-us/sysinternals/bb896647.aspx). That gave me this information: which is not especially helpful. Then I tried connecting WinDbg to WUDFHost.exe (the process that seems to host user mode drivers) to see if it could catch the error. Get it here: http://msdn.microsoft.com/en-US/windows/hardware/hh852363 Instructions: http://msdn.microsoft.com/en-US/library/windows/hardware/ff554716(v=vs.85).aspx That didn't help much. It didn't catch any exceptions as I'd hoped (which would point me to the cause of the crash at least). Here's the stack of one of the threads:

    Read the article

  • How to transfer Windows Vista disk image to new machine

    - by Mike Hobbs
    I'm trying to upgrade a user's machine to some better hardware. I know of Easy Transfer, but I'd rather not have to reinstall all the programs that are already present. (Some of which are no longer available, anyway). Instead, I'm trying to transfer the entire disk image from one machine to the other, but I ran into issues. If I copy the partition image over to the new machine using Clonezilla, I get errors on boot saying that I need to insert the Vista install disk and run repair. I do that, but it then says that it is unable to repair whatever it is that's broken. Next, I tried to sysprep the old machine before creating the image, but sysprep fails saying that it encountered some sort of system error. Should it be possible to sysprep any arbitrary machine, or does it only work on a relatively clean install? Could it be a missing driver that is tripping me up? The new machine is a fairly stock desktop that shouldn't need any special drivers beyond what's already present in standard Vista. Are there any foolproof methods for doing this sort of thing?

    Read the article

  • Allow access from outside network with dmz and iptables

    - by Ivan
    I'm having a problem with my home network. So my setup is like this: In my Router (using Ubuntu desktop v11.04), I installed squid proxy as my transparent proxy. So I would like to use dyndns to my home network so I could be access my server from the internet, and also I installed CCTV camera and I would like to enable watching it from internet. The problem is I cannot access it from outside the net. I already set DMZ in my modem to my router ip. My first guess is because i'm using iptables to redirect all inside network to use squid. And not allow from outside traffic to my inside network. Here is my iptables script: #!/bin/sh # squid server IP SQUID_SERVER="192.168.5.1" # Interface connected to Internet INTERNET="eth0" # Interface connected to LAN LAN_IN="eth1" # Squid port SQUID_PORT="3128" # Clean old firewall iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X # Load IPTABLES modules for NAT and IP conntrack support modprobe ip_conntrack modprobe ip_conntrack_ftp # For win xp ftp client #modprobe ip_nat_ftp echo 1 > /proc/sys/net/ipv4/ip_forward # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT ACCEPT # Unlimited access to loop back iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # Allow UDP, DNS and Passive FTP iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT # set this system as a router for Rest of LAN iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT # unlimited access to LAN iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT # DNAT port 80 request comming from LAN systems to squid 3128 ($SQUID_PORT) aka transparent proxy iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT # if it is same system iptables -t nat -A PREROUTING -i $INTERNET -p tcp --dport 80 -j REDIRECT --to-port $SQUID_PORT # DROP everything and Log it iptables -A INPUT -j LOG iptables -A INPUT -j DROP If you know where did I miss, please advice me. Thanks for all your help and I really appreciate it.

    Read the article

  • What are some alternatives to word processing with Markdown?

    - by Hassan
    I've used MS Word-style editors for a long time, but I never got used to how unintuitive and cumbersome they are. I'm not talking specifically about MS Word, but also other editors that seem to mimic Word, like OpenOffice, NeoOffice, etc. I've found myself preferring to write in Markdown (much like on this site). I've found a few good Markdown editors, and I like using them a lot more than using Word-style editors. Here is what they generally look like: As you can see, it works much differently than a Word-style editor. This is a generally cleaner way of writing, since formatting is done right in the text, and is extremely simple to use (no highlighting some text, then clicking a button in some menu you have to find). Although editing text this way is great, I've realized that the syntax can only be used for very specific needs (bullets, numbered lists, headings and sub-headings, bold, italic, and some other common ones). However, many features are missing. Here are some features that would be nice in a word processor: Tables. Indenting paragraphs. Good image support (you can link to images, but not add them, since Markdown is just text). More simple to use than Word and its cronies. Cross-platform. Some of these can be fixed with in-line HTML, but nobody wants to do that. It seems Markdown was designed for editing text on the internet. Is there a similar setup that works better for desktop word processors?

    Read the article

  • Diagnosing linux issues with ipod syncing in Ubuntu

    - by alexpotato
    Issue: I am currently using Ubuntu 9.10 with a 5th generation Ipod 60 GB Black video classic. In general, it seems that Ubuntu can always detect the usb hd and displays it on my desktop. However, some applications seem to detect the ipod (e.g. Rythymbox and gtkpod do but Banshee does not) and some don't. I narrowed down the banshee issue to a bug that requires Nautilus to be restarted (although it would be nice to not have to do this). Also, Whenever I sync between these applications, it appears that everything is working fine during the sync but when I disconnect the ipod and browse, all of the songs seem to be there but the playlists are not. If I reconnect the ipod, in banshee specifically it sees the space usage as "other". What I am looking for is some way to at least understand what is and is not working OR directions to some where that can help me learn what's going on. I have already tried: -IRC. Either the channel is too general (e.g. #ubuntu) or no one is ever one (e.g. #banshee) -The web. Most of what I've found is too specific to one particular bug or too general. Any thoughts?

    Read the article

  • Intermittent CNAME forwarding

    - by Godric Seer
    I host a personal website on an old desktop that is LAMP based. Since I have a dynamic IP, I use no-ip to make sure I have a working domain name at all times. I also have a domain I have bought on GoDaddy where I have a CNAME record forwarding the www subdomain to my no-ip domain. At all times, I can connect to my website through the no-ip domain without issue. For the past several weeks, I never had an issue using the GoDaddy domain to connect (ssh or https). As of today, however, the GoDaddy domain only works for about 10 minutes at a time. I get server not found errors most of the time. Also, if I happen to be using the GoDaddy domain for an ssh connection, the connection will freeze. I have attempted to run tests using a couple of online DNS check websites, but have not gotten any errors at any time. I also contacted GoDaddy support but they had no issues connecting to the website, and therefore did not see any issues. I would like advice on how I could debug/resolve this issue. Since the problem appeared without me changing anything on my end, I hope it will resolve itself, but knowing the cause in case it happens again would be preferable. EDIT: I changed the configuration in GoDaddy to create an A (Host) that points at my current IP. This works fine, so I can access the site through the GoDaddy domain without the preceding www. I am currently waiting for a new CNAME record to propagate that points the www subdomain at the main host, rather than my no-ip domain.

    Read the article

  • Re-configure Office 2007 installation unattended: Advertised components --> Local

    - by abstrask
    On our Citrix farm, I just found out that some sub-components are "Installed on 1st Use" (Advertised), which does play well on terminal servers. Not only that, but you also get a rather non-descriptive error message, when a document tried to use a component, which is "Installed on 1st Use" (described on Plan to deploy Office 2010 in a Remote Desktop Services environment): Microsoft Office cannot run this add-in. An error occurred and this feature is no longer functioning correctly. Please contact your system administrator. I have ~50 Citrix servers where I need to change the installation state of all Advertised components to Local, so I created an XML file like this: <?xml version="1.0" encoding="utf-8"?> <Configuration Product="ProPlus"> <Display Level="none" CompletionNotice="no" SuppressModal="yes" AcceptEula="yes" /> <Logging Type="standard" Path="C:\InstallLogs" Template="MS Office 2007 Install on 1st Use(*).log" /> <Option Id="AccessWizards" State="Local" /> <Option Id="DeveloperWizards" State="Local" /> <Setting Id="Reboot" Value="NEVER" /> </Configuration> I run it with a command like this (using the appropriate paths): "[..]\setup.exe" /config ProPlus /config "[..]\Install1stUse-to-Forced.xml" According to the log file, the syntax appears to be accepted and the config file parsed: Parsing command line. Config XML file specified: [..]\Install1stUse-to-Forced.xml Modify requested for product: PROPLUS Parsing config.xml at: [..]\Install1stUse-to-Forced.xml Preferred product specified in config.xml to be: PROPLUS But the "Final Option Tree" still reads: Final Option Tree: AlwaysInstalled:local Gimme_OnDemandData:local ProductFiles:local VSCommonPIAHidden:local dummy_MSCOMCTL_PIA:local dummy_Office_PIA:local ACCESSFiles:local ... AccessWizards:advertised DeveloperWizards:advertised ... And the components remain "Advertised". Just to see if the installation state is overridden in another XML file, I ran: findstr /l /s /i "AccessWizards" *.xml Against both my installation source and "%ProgramFiles%\Common Files\Microsoft Shared\OFFICE12\Office Setup Controller", but just found DefaultState to be "Local". What am I doing wrong? Thanks!

    Read the article

  • Configure nginx for multiple node.js apps with own domains

    - by udo
    I have a node webapp up and running with my nginx on debian squeeze. Now I want to add another one with an own domain but when I do so, only the first app is served and even if I go to the second domain I simply get redirected to the first webapp. Hope you see what I did wrong here: example1.conf: upstream example1.com { server 127.0.0.1:3000; } server { listen 80; server_name www.example1.com; rewrite ^/(.*) http://example1.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example1.com; access_log /var/log/nginx/example1.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example1.com; proxy_redirect off; } } example2.conf: upstream example2.com { server 127.0.0.1:1111; } server { listen 80; server_name www.example2.com; rewrite ^/(.*) http://example2.com/$1 permanent; } # the nginx server instance server { listen 80; server_name example2.com; access_log /var/log/nginx/example2.com/access.log; # pass the request to the node.js server with the correct headers and much more can be added, see nginx config options location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_set_header X-NginX-Proxy true; proxy_pass http://example2.com; proxy_redirect off; } } curl simply does this: zazzl:Desktop udo$ curl -I http://example2.com/ HTTP/1.1 301 Moved Permanently Server: nginx/1.2.2 Date: Sat, 04 Aug 2012 13:46:30 GMT Content-Type: text/html Content-Length: 184 Connection: keep-alive Location: http://example1.com/ Thanks :)

    Read the article

  • RemoteApp .rdp embed creds?

    - by Chris_K
    Windows 2008 R2 server running Remote Desktop Services (what we used to call Terminal Services back in the olden days). This server is the entry point into a hosted application -- you could call it Software as a Service I suppose. We have 3rd party clients connecting to use it. Using RemoteApp Manager to build RemoteApp .rdp shortcuts to distribute to client workstations. These workstations are not in the same domain as the RDS server. There is no trust relationship between domains (nor will there be). There is a tightly controlled site to site VPN between workstations and the RDS server, we're quite confident we have access to the server locked down. The remoteApp being run is an ERP application with its own authentication scheme. The issue? I'm trying to avoid the need to create AD logins for every end user when connecting to the RemoteApp server. In fact, since we're doing a remoteApp and they have to authenticate to that app, I'd rather just not prompt them at all for AD creds. I certainly don't want them caught up in managing AD passwords (and periodic expirations) for accounts they only use to get to their ERP login. However, I can't figure out how to embed AD creds in a RemoteApp .rdp file. I don't really want to turn off all authentication on the RDS server at that level. Any good options? My goal is to make this as seamless as possible for the end-users. Clarifying questions are welcome.

    Read the article

  • Stop Picasa (Mac) from scanning my harddrive

    - by Bodyscanner
    I want to use Picasa desktop app instead of the tedious & clunky web interface to share a couple of photos. Every time I launch Picasa it proceeds to open an annoying pop-up/tool-tip which flicks through every file on my HD using <=95% of CPU. I don't want this so I click the X. It appears again. I try to drag it somewhere less annoying onscreen but it pings back. I look in prefs for an option to turn it off. I give up and quit app until a new build comes out, which I download and repeat the above. WTF?! I understand Google can't be as cool as Apple - iPhoto isn't perfect by any means but at least it looks nice and 'just works'. I want to launch Picasa, not have it go through everything, not have 1000's of random pics and HD cruft on display in the list, and then perhaps drag in a few photos and upload them. Any idea of if that is possible? </rant>

    Read the article

  • My Western Digital 500GB Passport disk says "not formatted" when I plug it in Windows

    - by learnerforever
    Hi, When I plug my Western Digital 500 GB Passport disk in my Windows machine, it says "not formatted, do you want to format it" something. I started having this problem after I put it in an old desktop at home. I don't exactly know what went wrong. May be partition table is corrupted etc. Questions: Some quick search on internet tells me there are partition fixing utilities, which can fix corrupted partition table. testdisk being one of such utiities. I can understand how to use this to copy files from the disk to some other location, but I would like to fix the partition table in-place so that I don't have to temporary move around my data of approx size 300GB, then format passport disk and then again bring back the data. Is there any way I can fix the partition table in-place? Also, how to know which file system was there originally in the disk? Can I only keep the same file system? My current laptop is running Windows 7. Earlier I used to use Windows Vista. My other laptop has Windows XP. So I have access to Windows 7 and Windows XP. Please help! Thanks,

    Read the article

  • Can't resolve offline file conflicts

    - by Bryan
    We use roaming profiles on our Server 2008 R2 domain, with folder redirection for 'desktop', 'my documents' and 'application data'. But as our network is split across two sites, we have one file server at each site, which are configured to use domain based DFS namespaces and DFS replication to keep things in sync. The DFS path for the replication folder is as follows: \\domain\folderredirection$\<username>\<redirected-folder-name> The real paths are \\site-1-server\folderredirection$\<username>\<redirected-folder-name> and \\site-2-server\folderredirection$\<username>\<redirected-folder-name> As our users all switch between sites (sometimes several time per day), our folder redirection policy has to redirect to the DFS roots rather than hardcoded to a specific server. Both DFS and DFS-R have been proven to be working perfectly. On our laptops, we use offline files for the redirected folders, and this also works fine, however the problem is as follows: When conflicts occur in offline files, it is impossible to resolve the conflicts. I'm given the usual conflict resolution options (i.e. 'Ignore', 'Keep Both', 'Keep network' and 'Keep local'), however, not one of these options will resolve any conflict, yet no error is produced. We only use offline files on laptops, which have either Windows XP Professional or Windows 7 Professional installed. The problem is not specific to any one laptop, it affects every laptop and every conflicting file in exactly the same way. I would have thought the set up we have is common for companies that have multiple sites, so I'm hoping someone will have seen this before?

    Read the article

  • What is the latest on Microsoft Expression Studio licensing?

    - by DanM
    In the past, there's been an issue with Microsoft not allowing you to deactivate an Expression Studio key. Basically, you get two keys per license. If you assign both keys (say one to a desktop and one to a laptop), then you upgrade to a new machine (say you replace your laptop or upgrade some of the hardware), you have to buy a new copy of Expression Studio ($600 for Ultimate). This seems ludicrous to me, and I'm wondering if anyone knows if this policy is still in place. I can't seem to find a EULA online anywhere, so I don't know where to find this information. I know my laptop is due for replacement soon, and I want to know if I'm going to have to sink $600 into a software product I already purchased. For background, please refer to this thread on the Microsoft Expression forums: http://social.expression.microsoft.com/Forums/en-US/general/thread/da5587bc-b098-4c6a-9a56-af3608d940d0 Note that this thread is locked. Microsoft doesn't seem to want people to discuss this. This is one reason I'm posting here rather than on that site.

    Read the article

  • Setting up CIFS ISO Repository for Xen

    - by user85610
    I recently started working with Xen, to try to make better use of an extra desktop box for development testing. I'd like to be able to do OS installs on it without having to burn discs, but I'm having some trouble actually being able to get it to boot OS ISOs from a Windows share. My Windows box is running Win 7, and it's on a domain. I created a CIFS ISO SR in Xen, specifying the correct username and password to use. Xen is able to scan the share, and I see the ISOs that are in the folder, and can select them in the list in XenCenter. However, when I try to start the VM, I get "Error: Starting VM 'linxcentos' - INVALID_SOURCE - Unable to access a required file in the specified repository: file:///tmp/cdrom-repo-hIz-H7/isolinux/vmlinuz." I tried booting a different Linux ISO and got the same result. I know that the ISOs are valid because I was able to install them without issue when I tried VMWare ESXi earlier. What am I missing here? It's Xen/XenCenter 6 and I'm trying to install the newest version of Centos. I may end up burning it for now, but I'd like to get this to work, at least just for the principle of not letting mysterious behaviors go unsolved...

    Read the article

  • Can you share offline files cache with two user accounts?

    - by Joel Coehoorn
    I have a new laptop that I use for both home and work. It runs windows 7 ultimate, and is joined to the domain at work. It is okay to use this laptop for both work and personal activities, and I even have an account set up on the local machine in addition to the work domain account specifically for this to help keep the two separate. At home, I have a file server that I use to share files and printers with my wife's laptop, this new laptop, and my old desktop which will now become the family machine. My mp3 library is on there, among other things. What I want to do is use the windows Offline Files feature to keep a synced copy of my music library on the laptop. That part is easy. What's tricky is that I want to share this offline cache between both the local account on the laptop and my work domain account. I could do them both separately, but then I have two copies of a very large music library stored locally. This also means twice the sync burden, when the domain account is rarely connected to the file share. I really want to be able to sync from the local machine account only, and have the domain account be able to use the synced files. I know where the offline file cache is kept (\Windows\CSC) and I can find the cached files (not encrypted), but permissions on the cache are setup weird, and so using that cache directly is not trivial. Any ideas appreciated.

    Read the article

  • DNS server not working?

    - by Behrooz A
    I just set up a DNS Server on my windows 7, called SimpleDNS I added a zone for example sag.com and defined www.sag.com and sag.com to 192.168.1.2 (my Network IP Address) . the problem is when I try to ping sag.com the SimpleDNS logs says that it answered the request with 192.168.1.2 , but the ping doesn't resolve anything . SimpleDNS logs: > 14:00:43 Request from 192.168.1.2 for A-record for www.sag.com > 14:00:43 Sending reply to 192.168.1.2 about A-record for > www.sag.com: 14:00:43 -> Answer: A-record for www.sag.com = > 192.168.1.2 14:00:43 -> Authority: NS-record for www.sag.com = mehr-pc nslookup : > C:\Users\Mehr\Desktop>nslookup www.sag.com DNS request timed out. > timeout was 2 seconds. Server: UnKnown Address: 192.168.1.1 > > DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. DNS request timed out. > timeout was 2 seconds. > *** Request to UnKnown timed-out the DNS server IP is 192.168.1.2 , and Access point address : 192.168.1.1 what should I do?

    Read the article

  • Synergy, OSX client, Windows 7 server - No mouse on client

    - by Majenko
    I have the following Synergy setup: +------------++------------++------------++------------+ | Mac || Win 7 || Ubuntu 1 || Ubuntu 2 | |c ||s ||c ||c | +------------++------------++------------++------------+ Mac: OS/X Tiger 10.4.11 (G3) Win 7: Windows 7 Ultimate x64 Ubuntu 1 & Ubuntu 2: Desktop 10.10 Now, everything works nicely between the Win7 server and the two Ubuntu machines. What doesn't work is the Mac. I am running the very latest Synergy (1.4.2, downloaded last night). As far as the Mac is concerned everything should be working fine: Synergy 1.4.2 Client on Darwin 8.11.0 Darwin Kernel Version 8.11.0: Wed Oct 10 18:26:00 PDT 2007; root:xnu-792.24.17~1/RELEASE_PPC Power Macintosh Unable to connect to pasteboard. Clipboard sharing disabled. 2011-03-22 09:32:56.725 synergyc[406] Can't register screen saver connection 'com.apple.ScreenSaverDaemon' started client connecting to '192.168.0.202': 192.168.0.202:24800 connected to server entering screen leaving screen entering screen leaving screen But it's just not interacting with the display at all (mouse doesn't move, keyboard does nothing). I have tried running ktrace on synergyc and examining the dump, and the only clue I found was that it was trying to interact with the AccessibilityAPI which was disabled at first. Enabling Accessibility has had no effect whatsoever (it has only stopped the failure to open /var/db/.AccessibilityAPIEnabled in the ktrace dump) Anyone managed to get this to work in OS/X Tiger yet? I used to run the server on OS/X and have the windows / unix machines as clients, but as my Windows is now a laptop I'd like that to be the server.

    Read the article

  • A fatal exception 0E occured at 0028:xxxxxx in VxD IOS(01)

    - by winlin
    I get a blue screen of death in my windows 98 machine every time I boot it. I can't reach to my desktop. The error is like this: A fatal exception 0E occured at 0028:C003CC2F in VxD IOS(01) + 0000156B This was called from 0028:C0082E60 in VxD VKD(01) + 000001D0 I have to then give it a three finger salute to restart the system. There is no other way to shut down the system at this point except pressing the CPU power button. What could be the problem? My windows system.ini is: [boot] oemfonts.fon=vgaoem.fon shell=Explorer.exe system.drv=system.drv drivers=mmsystem.dll power.drv user.exe=user.exe gdi.exe=gdi.exe sound.drv=mmsound.drv dibeng.drv=dibeng.dll comm.drv=comm.drv mouse.drv=mouse.drv keyboard.drv=keyboard.drv *DisplayFallback=0 fonts.fon=vgasys.fon fixedfon.fon=vgafix.fon 386Grabber=vgafull.3gr display.drv=pnpdrvr.drv [keyboard] keyboard.dll= oemansi.bin= subtype= type=4 [boot.description] system.drv=Standard PC mouse.drv=Standard mouse keyboard.typ=Standard 101/102-Key or Microsoft Natural Keyboard aspect=100,96,96 display.drv=Standard PCI Graphics Adapter (VGA) [386Enh] ;device=tddebug.386 ;device=D:\TC\TASM\BIN\WINDPMI.386 ebios=*ebios woafont=dosapp.fon mouse=*vmouse, msmouse.vxd device=*dynapage device=*vcd device=*vpd device=*int13 keyboard=*vkd display=*vdd,*vflatd ConservativeSwapfileUsage=0 Paging=on [NonWindowsApp] TTInitialSizes=4 5 6 7 8 9 10 11 12 13 14 15 16 18 20 22 [power.drv] [drivers] wavemapper=*.drv MSACM.imaadpcm=*.acm ;msvideo.STV680=STV680sg.drv midi=mmsystem.dll wave=mmsystem.dll MSACM.msadpcm=*.acm [iccvid.drv] [mciseq.drv] [mci] cdaudio=mcicda.drv sequencer=mciseq.drv waveaudio=mciwave.drv avivideo=mciavi.drv videodisc=mcipionr.drv vcr=mcivisca.drv MPEGVideo=mciqtz.drv MPEGVideo2=mciqtz.drv [vcache] [MSNP32] [DISPLAY] BusThrottle=1 [network] SSID=1438661605 [vicax] msacm711=74603 msacm811=148933 msacm911=42405 [Sessew] VideoManufacturer=Standard VGA VideoBoard=Standard Display Adapter (VGA) MouseType=0 VidType=0 Mono=0 Ddraw=1 [drivers32] msacm.lhacm=lhacm.acm VIDC.IV50=ir50_32.dll msacm.iac2=C:\WINDOWS\SYSTEM\IAC25_32.AX VIDC.YUY2=msyuv.dll VIDC.UYVY=msyuv.dll VIDC.YVYU=msyuv.dll msacm.msaudio1=msaud32.acm msacm.vorbis=vorbis.acm msacm.l3acm=C:\WINDOWS\SYSTEM\L3CODECA.ACM msacm.sl_anet=sl_anet.acm VIDC.TSCC=tsccvid.dll VIDC.IV41=IR41_32.AX vidc.mpg4=mpg4c32.dll vidc.mp43=mpg4c32.dll msacm.voxacm160=vct3216.acm MSACM.msadpcm=msadp32.acm [TTFontDimenCache] 0 4=2 4 0 5=3 5 0 6=4 6 0 7=4 7 0 8=5 8 0 9=5 9 0 10=6 10 0 11=7 11 0 12=7 12 0 13=8 13 0 14=8 14 0 15=9 15 0 16=10 16 0 18=11 18 0 20=12 20 0 22=13 22

    Read the article

< Previous Page | 448 449 450 451 452 453 454 455 456 457 458 459  | Next Page >