Search Results

Search found 20188 results on 808 pages for 'wireless network'.

Page 47/808 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Wireless range extender throughput extremely slow.

  - by Alan B

  I've got a Belkin 54G router connected to the internet, and a Belkin range extender model F5D7132. I can get the range extender connected to the parent router SSID no problem, in repeater mode as opposed to access point mode. My Windows 7 laptop connects to the extender, which has a different SSID, and it connects with the full 5 bars. The issue is that when going through the extender internet performance is murderously slow, even getting the config pages of the extender or router is bad. When I connect directly to the router, all is well.

  Read the article

• Automated VLAN creation with residential Wireless devices

  - by Zephyr Pellerin

  We've got a few WRT devices from Linksys here, and the issue has arisen to deploy them in a relatively small environment, However, in the interest of manageability we'd like to be able to automatically VLAN (ideally NOT subnet) every user from one another. It seems obvious to me that the default firmware isn't capable of this - can OpenWRT/Tomato/DD-WRT support any sort of functionality such that new users are automatically VLANed or otherwise logically separated from other users? It seems like there's an easy IPtables or PF solution here, but I've been wrong before. (If that seemed a little ambiguous, heres an example) User 1 sends DHCP request to server, new VLAN (We'll call VLAN 1) is created, user is placed in that VLAN. Then, user 2 sends a DHCP request and is placed in VLAN 2 etc. etc.

  Read the article

• windows 7 virtual wireless adapter keeps going to sleep

  - by conners

  Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

  Read the article

• Wireless won't connect at home but works elsewhere

  - by Jenni

  My laptop connects via a wire into the modem fine and it works without any problems but it wont connect to it wirelessly, when I've taken it out places it connects fine in wifi area's! Also my son has his Wii connected wirelessly to it from his room upstairs without any problems, so I'm not sure where the problem lies, it hasn't worked since we got the modem it did on our old one and phoning Sky is just a waste of time they dont seem to know either and I just keep getting passed round departments repeating myself!

  Read the article

• External HDD connecting via USB disconnects wireless LAN connection

  - by Kensai

  Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

  Read the article

• Bridging two wireless interfaces with brctl?

  - by AK_

  I have this topology: [internet] ^ L-------[wlan0]-[host]-[wlan1]-----[client-1] I tried to bridge wlan0 wlan1 but it wont work with brctl; but magically when I issue this command #iw set dev wlan0 4addr on it adds wlan0 to the bridge BUT I lost all internet connection and I was unable to hook it to the internet router. can somebody please explain why did that happen and is there a way to get this done ?

  Read the article

• Home Wifi: wireless laptop cannot RDC to wired desktop (both windows 7)

  - by James_Smith

  Hi, Both laptop and desktop are connected to same wifi router. desktop is connected through wire and laptop is on wifi. Both Pcs are running windows 7 and can ping each other and are in same workgroup. When I try to RDC my desktop on my laptop, it connects to the desktop and shows the windows credentials screen. An admin user (J) with same password exists on both PCs. But it gives an error "the user name or password is incorrect" However when I RDC the laptop FROM desktop using the above steps..it works perfectly wel! The same credentials issue comes with Shared folders. What am I doing wrong?

  Read the article

• ubtuntu studio 9.10 wireless does'nt work

  - by eric

  hi everyone! i just bought a brand new laptop. at first i was with windows 7 and decided to switch to ubuntu studio 9.10 on my studio dell. my ethernet card is a netlink. i do not have any connection at all to the internet, only when i plug the wire to my computer. i've tried a lot of stuff nothing work. can you help me please someone.

  Read the article

• What is the structure of network managers system-connections files?

  - by Oyks Livede

  could anyone list the complete structure of the configuration files, which network manager stores for known networks in /etc/NetworkManager/system-connections for known networks? Sample (filename askUbuntu): [connection] id=askUbuntu uuid=81255b2e-bdf1-4bdb-b6f5-b94ef16550cd type=802-11-wireless [802-11-wireless] ssid=askUbuntu mode=infrastructure mac-address=00:08:CA:E6:76:D8 [ipv6] method=auto [ipv4] method=auto I would like to create some of them by my own using a script. However, before doing so I would like to know every possible option. Furthermore, this structure seems somehow to resemble the information you can get using the dbus for active connections. dbus-send --system --print-reply \ --dest=org.freedesktop.NetworkManager \ "$active_setting_path" \ # /org/freedesktop/NetworkManager/Settings/2 org.freedesktop.NetworkManager.Settings.Connection.GetSettings Will tell you: array [ dict entry( string "802-11-wireless" array [ dict entry( string "ssid" variant array of bytes "askUbuntu" ) dict entry( string "mode" variant string "infrastructure" ) dict entry( string "mac-address" variant array of bytes [ 00 08 ca e6 76 d8 ] ) dict entry( string "seen-bssids" variant array [ string "02:1A:11:F8:C5:64" string "02:1A:11:FD:1F:EA" ] ) ] ) dict entry( string "connection" array [ dict entry( string "id" variant string "askUbuntu" ) dict entry( string "uuid" variant string "81255b2e-bdf1-4bdb-b6f5-b94ef16550cd" ) dict entry( string "timestamp" variant uint64 1383146668 ) dict entry( string "type" variant string "802-11-wireless" ) ] ) dict entry( string "ipv4" array [ dict entry( string "addresses" variant array [ ] ) dict entry( string "dns" variant array [ ] ) dict entry( string "method" variant string "auto" ) dict entry( string "routes" variant array [ ] ) ] ) dict entry( string "ipv6" array [ dict entry( string "addresses" variant array [ ] ) dict entry( string "dns" variant array [ ] ) dict entry( string "method" variant string "auto" ) dict entry( string "routes" variant array [ ] ) ] ) ] I can create new setting files using the dbus (AddSettings() in /org/freedesktop/NetworkManager/Settings) passing this type of input, so explaining me this structure and telling me all possible options will also help. Afaik, this is a Dictionary{String, Dictionary{String, Variant}}. Will there be any difference creating config files directly or using the dbus?

  Read the article

• Is there a way to disable the hardware on/off switch for the Wireless interface?

  - by avee

  I have an HP 520 and is running the latest Ubuntu 11.10. The hardware works fine with Ubuntu with one exception: The device has a hardware switch for turning the wifi on and off. Every time the wi-fi is disabled through the hardware switch, I am unable to bring it on again. The message on the networking popup would be device not ready. What I am looking for is a way to disable the hardware switch altogether so that when users accidentally press the button, the wifi would not be disabled. There is no setting to disable the switch in the BIOS. Hardware info from lspci -nn: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GME Express Memory Controller Hub [8086:27ac] (rev 03) 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GME Express Integrated Graphics Controller [8086:27ae] (rev 03) 00:02.1 Display controller [0380]: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller [8086:27a6] (rev 03) 00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01) 00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) 00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) 00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) 00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e1) 00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge [8086:27b9] (rev 01) 00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller [8086:27c4] (rev 01) 02:06.0 CardBus bridge [0607]: ENE Technology Inc CB1410 Cardbus Controller [1524:1410] (rev 01) 02:08.0 Ethernet controller [0200]: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile [8086:1068] (rev 01) 10:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) The output from lsmod | grep iwl: iwl3945 73329 0 iwl_legacy 71499 1 iwl3945 mac80211 272785 2 iwl3945,iwl_legacy cfg80211 172392 3 iwl3945,iwl_legacy,mac80211

  Read the article

• Connecting a Wifi router to receivers with a cable instead of antenna?

  - by 31eee384

  This is a very strange question--I'd go so far as to say it's a stupid question. I'm being told that it is possible to, to describe it briefly, use a cable to connect an access point and a receiver directly to one another. This means that I would unscrew the access point's antenna, and attach one end of a cable to the port. Then, on the wireless receiver, I would also unscrew the antenna and plug in the other side of the cable. I'm being told the connection would work after this, just as a normal Wifi connection would. Bonus mini-question: if this works, would it still work if a splitter were attached to the access point and multiple receivers plugged in to the network? What would happen if I do this? Based on my surprisingly deficient knowledge of radio transmission, I don't think it would work. I would like some help knowing why it won't (or will) though, if possible. This is a somewhat hypothetical question--I realize that Ethernet does this exact job very handily, and I could just throw in a switch instead of the splitter. I simply feel that I should understand this scenario. Thanks for any help you can offer.

  Read the article

• Outdoor WiFi Mesh Topology vs. Repeaters

  - by IronJaxor

  Here's the current configuration in our organization (which I believe is incorrect): We have a number of Cisco 1500 series AP's (22 in total), that are mounted outdoors to provide seamless WiFi coverage over a large area. Each AP however has its own physical ethernet connection back to the WLC (All the AP's are marked as Root AP's). They are all broadcasting the same SSID. We have tried to stagger the channel selection but because there are only three non-overlapping channels to choose from, and in some areas the density of AP's is quite high, there is multiple places of channel interference. With this configuration we experience 100-150 disconnects from clients every day. (Our clients are mobile so they move throughout the coverage area constantly). My idea is to switch the AP's to the same channel thereby forming a wireless mesh, use the built in functionality of the 1500 series to use 802.11a as the backhaul, designate one or two AP's as root AP's and wire them back to the WLC. Thereby forming a WiFi mesh, which if I'm not mistaken is the point of the 1500 series in the first place! I am however completely new at WiFi networks and wondering if I am simply mistaken in what I believe my proposed changes will enable, or if there is a better way to tackle the WiFi topology.

  Read the article

• why would resetting the Netgear N300 router fix my Win 7 laptop's slow wifi?

  - by rjnagle

  In the past day the wifi download speeds of my Win 7 HP 64 bit laptop have slowed considerably. I am trying to troubleshoot the problem and to figure out whether it's hardware related (i.e., is the Intel(R) Centrino(R) Wireless-N 2230 the problem?) or router related. I have a Netgear N300 router connected to my modem. I'm using Speedtest to measure my speed. First, during my problem state, my ipad can download and upload at normal speeds. It's only my Win 7 laptop which is having problems. Because my ipad downloads at normal speeds, that would tell me that the problem is specific to the laptop (either HW or SW). But when I restarted my Netgear router, the laptop wifi problems disappeared. That just doesn't make sense. If we know that one device can connect properly to the router, why would a laptop have problems? What are some possible reasons why this might happen? Also, during my problem state, I noticed that on my laptop upload speeds were faster than my download speeds. Anybody have a guess about what might cause upload speeds on one device to be faster than another? Is there any actions i could take (or options to enable) so this problem won't occur. (I initially thought my problem might be software related or memory related -- Norton AV or browser plugins. But even after I disabled everything and made sure memory footprint was minimal, the slowdown was still occurring -- and it solved itself altogether when the router was reset).

  Read the article

• Delayed startup of network icon (wi-fi)

  - by Michael Dy

  When my Windows 7 Starter netbook boots up and after everything is loaded, it takes about five minutes before the network icon near the clock becomes functional. When there's an available wi-fi signal (which automatically connects to my netbook as preconfigured) after the boot, my netbook seamlessly connects to it even if the network icon cannot be clicked or accessed. (The icon is shown to be loading for about five minutes.) During this time, when I go to Network and Sharing Center, it takes the same time to load. So even while the icon and the Center cannot be accessed, I can surf the Internet. When my netbook was still new, it didn't have this issue. How do I fix this?

  Read the article

• Windows 7 freezes on connecting second time to same wifi network

  - by Rakesh Juyal

  I am using Lenovo - y470, which comes with windows 7 home premium. I can connect to my wifi network and there is no issue in that. But the problem comes if the network get disconnected and i again try to connect to same wifi network. As soon as i click on connect my system freezes, and i can not even press ctrl+ alt+ del . The only think i am allowed to do at that time is press and hold power button to shut down the system and restart it again. Please tell me how to resolve this issue. Please let me know if some more information is required. OS: Windows 7 Router: Netgear n-150

  Read the article

• My wifi internet router connection resets when more devices connected

  - by joeeoj

  The wifi internet router is connected directly to Internet cable. The main Pc is attached to it via LAN cable, while 1 laptop and 3 mobile phones connect to it via wifi. Whenever 2 or more devices connect via wifi, the internet connection breaks after one minute and internet connection resets. I tracked this behaviour for weeks, and came to conclusion: It seems like some 'device 1' got IP then it went to suspend mode. Then 'device 2' connected to router and got the same IP. Then the 'device 1' woke up from suspend mode and tried to use his old IP. The router sees that 2 same IP addresses exists and automatically reset internet connection. Is this possible? Have I tracked the problem correctly and how to solve it? The router is set to lease 100 IP addresses to devices who try to connect. The password is strong and no hacker's device is being connected to my wifi network. Tried changing password and AP's name.

  Read the article

• Use router as external high powered Wi-Fi adapter

  - by skywinder

  I need a powerful external Wi-Fi adapter for a couple of days. I heard that some types of router support this mode, allowing me to connect the router to my notebook and just use it as an external Wi-Fi interface. Is it possible to connect a router as an external Wi-Fi adapter? How can I determine it? Updated: My purpose is to set the router to monitor mode and check networks around through my notebook to provide better configuration for my network (power, channels, etc). My internal notebook Wi-Fi adapter is too weak for this purpose. Should I use special drivers for that? If yes, can someone describe, step-by-step, how to do it? p.s. I want to use ASUS RT-N56U as an external Wi-Fi adapter on OS X or Ubuntu.

  Read the article

• Multiple SSIDs better or worse

  - by swiss196

  I'm just setting up a network in a student house with 10 rooms, 3 floors. Configuration at the moment is as follows: Virgin Media 100mb Cable Virgin SuperHub on ground floor broadcasting on SSID1 Second AP(Edimax) wired on middle floor broadcasting on SSID2 These two networks server all 3 floors fairly well but I was wondering whether it would be better to setup an individual SSID for each floor (both the routers allow me to configure up to 3 ssids on each!). Would this help with speed issues, i.e if someone on the top floor is downloading/streaming etc, this wouldn't affect someone on the middle floor on a different SSID Or, will it have no effect? Thanks, Dave

  Read the article

• Is WEP used in conjunction with a wireless access list adequate security?

  - by LeopardSkinPillBoxHat

  I use a Netgear wireless router, with various wireless devices connecting to it. One of my wireless devices doesn't support WPA2 security, so I had to downgrade the security on the router to WEP. We all know WEP is broken, so as an added measure I enabled a wireless access list on the router so that only devices with specified MAC addresses which are in my access list are permitted to connect to the router. I know it is possible to spoof a MAC address from a device for the purposes of accessing a secure network like this. But is it easy? Is using WEP and a wireless access list good enough to prevent most hacking attacks? Or should I do whatever I can to ensure all devices support WPA2 in the future?

  Read the article

• Can my ISP find out if my wireless is protected or not?

  - by Zakukashi

  Im just wondering how much my ISP knows about my activities. I have a Modem from them this modem then connects to a SITCOM wireless router which then leads to MY PC's, Phones, Laptops. I really need to know if my ISP knows if my router is in unprotected state of wireless or not. The Sitcom box it not theirs, we payed for it long after getting this internet. Does my Sitcom wireless router send data to my ISP on its own, indicating delicate information such as wireless protection on or off? Or does the ISP's modem fish out this information on its own since our wireless router is connected to it? Would greatly appreciate any answer.

  Read the article

• Windows 7 blocks network access to network-installed apps

  - by VokinLoksar

  Windows 2008 R2 domain. Users, running Windows 7 Enterprise, are trying to run some software from a network share. Specifically, I've tested this with MATLAB and PuTTY. When starting, MATLAB has to contact a licensing server to get its license. This action fails for regular users when they start MATLAB from the network share. However, if they copy the installation directory to a local disk everything works fine. Running MATLAB as an admin user from the network share also works. Same story with PuTTY. If the executable is launched from the share, regular users cannot connect to any servers. Something is blocking network communications for programs that are launched from a network drive. Here's the only other mention I could find of the same problem: https://social.technet.microsoft.com/Forums/en-US/w7itpronetworking/thread/4504b192-0bc0-4402-8e00-a936ea7e6dff It's not the Windows firewall or the IE security settings. Does anyone have any clue as to what this is?

  Read the article

• My Laptop (HP/Compaq 2510p) running ubuntu 10.04 LTS keeps losing the WLAN connection.

  - by Ernelli

  I am using Wicd and can successfully connect to my ADSL router (Thomson TG 787) using WPA PSK. But with regular interval I lose the ability to connect to Internet. I can ping the GW and can actually ping servers on the Internet but not connect to them using HTTP (Tested with both Firefox and wget). I would suspect the router unless for the fact that the problem does not show up when running Windows XP on the same computer and also, when the problem arises, a simple disconnect/connect in Wicd solves the problem, which does not involve the router (Except for the DHCP request). I have searched Ubuntu forums without luck, most problems described relate to specific network drivers or other problems. Does anyone have the same experience with Linux/Ubuntu and WLAN?

  Read the article

• WIndows Hosted Network

  - by Nandakumar V

  I have created a hosted network in my windows7 system. The netsh wlan show hostednetwork command gives the output Hosted network settings ----------------------- Mode : Allowed SSID name : "rambo" Max number of clients : 100 Authentication : WPA2-Personal Cipher : CCMP Hosted network status --------------------- Status : Started BSSID : xx:xx:xx:xx:xx:xx Radio type : 802.11n Channel : 11 Number of clients : 1 xx:xx:xx:xx:xx:xx Authenticated But I have forgot the password for this connection and after some googling I found the command netsh wlan refresh hostednetwork YourNewNetworkPassword. But on executing this command it get the error C:\Users\user>netsh wlan refresh hostednetwork rambo123 Invalid value "rambo123" for command option "data". Usage: refresh hostednetwork [data=]key I have no idea what is wrong with this command.

  Read the article

• Cracking WEP wireless networks [closed]

  - by John

  I have a problem.I am new to linux and would like to know how to crack a WEP and WAP wireless encrypted network.I have been typing the command "airmon-ng" i have even initialized the wlan0 with the following command on Backtrack 4 but it has failed,When I use airmon-ng command, it does not display my wireless driver.SomeOne please xplain to me from scratch.Would really appreciate it.

  Read the article

• Windows mobile phone wireless connection - never mind

  - by user01254

  Could anyone please point me to a good tutorial on how to connect a Windows Mobile 6 device to a wireless connection shared on Windows XP ? That is the PC shares the wireless connection (add hoc network ?) and the device connects via Internet Explorer to a server that runs on the PC. I searched a lot and did not find a tutorial that addresses my problem. All were either outdated, either incomplete or incorrect. NEVER MIND.

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >