Search Results

Search found 13599 results on 544 pages for 'patch management'.

Page 477/544 | < Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >

• Can’t connect to SQL Server 2008 - looks like Shared Memory problem

  - by user38556

  I am unable to connect to my local instance of SQL Server 2008 Express using SQL Server Management Studio. I believe the problem is related to a change I made to the connection protocols. Before the error occurred, I had Shared Memory enabled and Named Pipes and TCP/IP disabled. I then enabled both Named Pipes and TCP/IP, and this is when I started experiencing the problem. When I try to connect to the server with SSMS (with either my SQL server sysadmin login or with windows authentication), I get the following error message: A connection was successfully established with the server, but then an error occurred during the login process. (provider: Named Pipes Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233) Why is it returning a Named Pipes error? Why would it not just use Shared Memory, as this has a higher priority order in the list of connection protocols? It seems like it is not listening on Shared Memory for some reason? When I set Named Pipes to enabled and try to connect, I get the same error message. My windows account is does not have administrator priviliges on my computer - perhaps this is making a difference in some way (as some of the discussions in this post about an "SuperSocketNetLib\Lpc" registry key seems to suggest). I have tried restarting the SQL Server service, by the way, and also tried to get someone to log onto the machine with an admin account to restart the SQL Server service. Still no luck.

  Read the article

• VM automatic provisioning advice

  - by jdgregson

  In my lab we have 24 workstations, each with five technician-maintained virtual machines set up in VMware Workstation. These provide a lot of management overhead, as we have to update them as well as the host operating systems every three months (the start of the next quarter), which adds up to 144 systems to update instead of just 24. Whenever we need to reimage the hosts, the VMs add another 130GB to each image, which is over 3TB of extra data to send over the network, and a lot more time to apply each image, and then we still have to boot all 120 VMs and assign them a unique IP Address and host names. We would like to get the VMs off the hosts and onto a server, but after looking around for a few days, I still don't know where to begin looking for a solution. There may be a better way to do this, but in my mind, the ideal solution would be to replace the VMs on the host machines with five Thin Client operating systems, each configured to connect to a server and be sent or connected to a unique virtual machine. We can't have 120 VMs running on the server all the time, so the server would have to create a copy of the VM from a template whenever a student tries to boot one, and destroy the VM after the student is finished with it. If there is another client application that has to be installed on the hosts that would be fine, the only reason I'd like to keep them in VMware Workstation is because students already know to look there for the VMs when they need to use them. What, if any, virtualization software will allow this? Is there some other solution I'm not seeing?

  Read the article

• Visual Studio build fails: unable to copy exe-file from obj\debug to bin\debug

  - by Nailuj

  This is a question asked before, both here on Stack Overflow and other places, but none of the suggestions I've found this far has helped me, so I just have to try asking a new question. Scenario: I have a simple Windows Forms application (C#, .NET 4.0, Visual Studio 2010). It has a couple of base forms that most other forms inherit from, it uses Entity Framework (and POCO classes) for database access. Nothing fancy, no multi-threading or anything. Problem: All was fine for a while. Then, all out of the blue, Visual Studio failed to build when I was about to launch the application. I got the warning "Unable to delete file '...bin\Debug\[ProjectName].exe'. Access to the path '...bin\Debug\[ProjectName].exe' is denied." and the error "Unable to copy file 'obj\x86\Debug\[ProjectName].exe' to 'bin\Debug\[ProjectName].exe'. The process cannot access the file 'bin\Debug\[ProjectName].exe' because it is being used by another process." (I get both the warning and the error when running Rebuild, but only the error when running Build - don't think that is relevant?) I understand perfectly fine what the warning and error message says: Visual Studio is obviously trying to overwrite the exe-file while it the same time has a lock on it for some reason. However, this doesn't help me find a solution to the problem... The only thing I've found working is to shut down Visual Studio and start it again. Building and launching then works, untill I make a change in some of the forms, then I have the same problem again and have to restart... Quite frustrating! As I mentioned above, this seems to be a known problem, so there are lots of suggested solutions. I'll just list what I've already tried here, so people know what to skip: Creating a new clean solution and just copy the files from the old solution. Adding the following to the following to the project's pre-build event: if exist "$(TargetPath).locked" del "$(TargetPath).locked"   if not exist "$(TargetPath).locked" if exist "$(TargetPath)" move "$(TargetPath)" "$(TargetPath).locked" Adding the following to the project properties (.csproj file): <GenerateResourceNeverLockTypeAssembliestrue</GenerateResourceNeverLockTypeAssemblies However, none of them worked for me, so you can probably see why I'm starting to get a bit frustrated. I don't know where else to look, so I hope somebody has something to give me! Is this a bug in VS, and if so is there a patch? Or has I done something wrong, do I have a circular reference or similar, and if so how could I find out? Any suggestions are highly appreciated :)

  Read the article

• WebDriver with firefox-x11 on Mac

  - by binil

  I am trying to run a headless test for a web application using WebDriver on Mac OS X 10.6.3. My plan is to run firefox-x11 with Xvfb, but WebDriver is unable to launch firefox-x11. My code is: System.setProperty("webdriver.firefox.bin", "/opt/local/bin/firefox-x11-devel-standalone"); WebDriver browser = new FirefoxDriver(); try { browser.get("http://google.com"); } finally { browser.close(); } but this fails with: org.openqa.selenium.WebDriverException: Unable to start firefox cleanly. Exit value: 1 Ran from: [/opt/local/bin/firefox-x11-devel-standalone, --verbose, -silent] System info: os.name: 'Mac OS X', os.arch: 'x86_64', os.version: '10.6.3', java.version: '1.6.0_17' Driver info: driver.version: firefox at org.openqa.selenium.firefox.FirefoxBinary.copeWithTheStrangenessOfTheMac(FirefoxBinary.java:200) at org.openqa.selenium.firefox.FirefoxBinary.startProfile(FirefoxBinary.java:83) at org.openqa.selenium.firefox.FirefoxBinary.clean(FirefoxBinary.java:264) at org.openqa.selenium.firefox.FirefoxLauncher.startProfile(FirefoxLauncher.java:66) at org.openqa.selenium.firefox.internal.NewProfileExtensionConnection.<init>(NewProfileExtensionConnection.java:45) at org.openqa.selenium.firefox.internal.ExtensionConnectionFactory.connectTo(ExtensionConnectionFactory.java:44) When I manually launch /opt/local/bin/firefox-x11-devel-standalone from the terminal, it seems to work fine despite some harmless errors shown. So, I tried to patch the org.openqa.selenium.firefox.FirefoxBinary.copeWithTheStrangenessOfTheMac(ProcessBuilder) method to ignore the errors and exit value of 1. Now it proceeds further, but fails with: Caused by: org.openqa.selenium.WebDriverException: Failed to connect to binary FirefoxBinary(/opt/local/bin/firefox-x11-devel-standalone) on port 7055; process output follows: Xlib: extension "RANDR" missing on display "/tmp/launch-tElCRZ/org.x:0". Dynamic session lookup supported but failed: launchd did not provide a socket path, verify that org.freedesktop.dbus-session.plist is loaded! (firefox-bin:88837): Gtk-CRITICAL **: gtk_widget_has_screen: assertion `GTK_IS_WIDGET (widget)' failed ?Xlib: extension "RANDR" missing on display "/tmp/launch-tElCRZ/org.x:0". Dynamic session lookup supported but failed: launchd did not provide a socket path, verify that org.freedesktop.dbus-session.plist is loaded! (firefox-bin:88877): Gtk-CRITICAL **: gtk_widget_has_screen: assertion `GTK_IS_WIDGET (widget)' failed ? System info: os.name: 'Mac OS X', os.arch: 'x86_64', os.version: '10.6.3', java.version: '1.6.0_17' Driver info: driver.version: firefox at org.openqa.selenium.firefox.internal.NewProfileExtensionConnection.connectToBrowser(NewProfileExtensionConnection.java:60) at org.openqa.selenium.firefox.internal.NewProfileExtensionConnection.<init>(NewProfileExtensionConnection.java:49) at org.openqa.selenium.firefox.internal.ExtensionConnectionFactory.connectTo(ExtensionConnectionFactory.java:44) ... 4 more Caused by: org.openqa.selenium.firefox.NotConnectedException: Failed to start up socket within 45000 at org.openqa.selenium.firefox.internal.AbstractExtensionConnection.connectToBrowser(AbstractExtensionConnection.java:143) at org.openqa.selenium.firefox.internal.NewProfileExtensionConnection.connectToBrowser(NewProfileExtensionConnection.java:58) ... 6 more Has anyone got WebDriver to work with firefox-x11? This post seems to suggest that one person had got it working, but it does not contain much details.

  Read the article

• Eventlet or gevent or Stackless + Twisted, Pylons, Django and SQL Alchemy

  - by Khorkrak

  We're using Twisted extensively for apps requiring a great deal of asynchronous io. There are some cases where stuff is cpu bound instead and for that we spawn a pool of processes to do the work and have a system for managing these across multiple servers as well - all done in Twisted. Works great. The problem is that it's hard to bring new team members up to speed. Writing asynchronous code in Twisted requires a near vertical learning curve. It's as if humans just don't think that way naturally. We're considering a mixed approach perhaps. Maybe do the xmlrpc server part and process management in Twisted still but the other stuff in code that at least looks synchronous while not being as such. Then again I like explicit over implicit so hmmm. Anyway onto greenlets - how well does that stuff work? So there's Stackless and as you can see from my Gallentean avatar I'm well aware of the tremendous success in it's use for CCP's flagship EVE Online game first hand. What about Eventlet or gevent? Well for now only Eventlet works with Twisted. However gevent claims to be faster since it's not a pure python implementation it instead uses libevent. It also has fewer idiosyncrasies and defects supposedly. The documentation there is minimal in comparison to Eventlet and it's maintained by 1 guy as far as I can tell. This makes me leery but all great projects start this way so... Then there's PyPy - I haven't even finished reading about that one yet - just saw it in this thread: Drawbacks of Stackless. So confusing - I'm wondering what the heck to do - sounds like Eventlet is probably the best bet but is it really stable enough? Anyone out there have any experience with it? Should we go with Stackless instead as it's been around and is proven technology - just like Twisted is as well - and they do work together nicely. But still I hate having to have a separate version of Python to do this. what to do.... This somewhat obnoxious blog entry hit the nail on the head for me though: Asynchronous IO for Grownups We're stuck using MySQL as well - I never knew how great PostgreSQL was until having had to work on a production OLTP system in MySQL instead - but that's another story. But if that monkey patch thing really works then wow. Just wow.

  Read the article

• Yesterday's broken codebase hunt me back

  - by sandun dhammika

  I need a fun oky. I just love this openmoko hardware and hacking into it. Please could somebody help me to compile qemu.I 'm so sad and I want to compile qemu and it required the GCC3.x and then I downloaded gcc 3.2 but when I configure it and build it, it gives a very sad error message. G_FOR_TARGET=" "SHELL=/bin/sh" "EXPECT=expect" "RUNTEST=runtest" "RUNTESTFLAGS=" "exec_prefix=/gcc-3.2" "infodir=/gcc-3.2/info" "libdir=/gcc-3.2/lib" "prefix=/gcc-3.2" "tooldir=/gcc-3.2/i686-pc-linux-gnu" "AR=ar" "AS=as" "CC=gcc" "CXX=c++" "LD=ld" "LIBCFLAGS=-g -O2" "NM=nm" "PICFLAG=" "RANLIB=ranlib" "DESTDIR=" DO=all multi-do make[1]: Leaving directory `/gcc-3.2/gcc-3.2/zlib' make[1]: Entering directory `/gcc-3.2/gcc-3.2/fastjar' make[1]: Leaving directory `/gcc-3.2/gcc-3.2/fastjar' make[1]: Entering directory `/gcc-3.2/gcc-3.2/gcc' gcc -c -DIN_GCC -g -O2 -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -Wtraditional -pedantic -Wno-long-long -DHAVE_CONFIG_H -DGENERATOR_FILE -I. -I. -I. -I./. -I./config -I./../include ./read-rtl.c -o read-rtl.o In file included from ./read-rtl.c:24:0: ./rtl.h:125:3: warning: type of bit-field ‘code’ is a GCC extension ./rtl.h:128:3: warning: type of bit-field ‘mode’ is a GCC extension ./read-rtl.c: In function ‘fatal_with_file_and_line’: ./read-rtl.c:61:1: warning: traditional C rejects ISO C style function definitions ./read-rtl.c: In function ‘read_rtx’: ./read-rtl.c:662:8: error: lvalue required as increment operand make[1]: *** [read-rtl.o] Error 1 make[1]: Leaving directory `/gcc-3.2/gcc-3.2/gcc' make: *** [all-gcc] Error 2 This is so sad and this is sooo bad. I have searched patches and workaround all over the Internet to this,but I couldn't find any alternative for this. I'm out of my patience now. I want that virtual machine ready and I want to make a debug host cos I don't have some money to buy original neo 1937 hardware. The patch that I have found comes with a nasty error too. I'm so sick of it.Any idea how could I fix this problem and make this work? Please please I'm begging you somebody help me please. Thanks all.

  Read the article

• WPF Choppy Animation

  - by Chris Dunaway

  WPF Windows-XP SP3 I'm having a problem with a simple WPF animation. I use the following Xaml code (in XamlPad and also in a WPF project): <Page xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:sys="clr-namespace:System;assembly=mscorlib" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" > <Border Name="MyBorder" BorderThickness="10" BorderBrush="Blue" CornerRadius="10" Background="DarkRed" > <Rectangle Name="MyRectangle" Margin="10" StrokeDashArray="2.0,1.0" StrokeThickness="10" RadiusX="10" RadiusY="10" Stroke="Black" StrokeDashOffset="0"> <Rectangle.Triggers> <EventTrigger RoutedEvent="Rectangle.Loaded"> <BeginStoryboard> <Storyboard> <DoubleAnimation Storyboard.TargetName="MyRectangle" Storyboard.TargetProperty="StrokeDashOffset" From="0.0" To="3.0" Duration="0:0:1" RepeatBehavior="Forever" Timeline.DesiredFrameRate="30" /> </Storyboard> </BeginStoryboard> </EventTrigger> </Rectangle.Triggers> </Rectangle> </Border> </Page> It has the effect of causing the border to animate around the rectangle. After a fresh reboot of the machine, this animation is nice and smooth. However, I tend to leave my machine on all the time and after a period time elapses (I don't know how long), the animation starts stuttering and becomes choppy. I thought that it may be memory or resource issues, but after shutting down all other apps and any services that seem unnecessary, the stuttering still continues. However, after a system reboot, the animation is smooth again! I get the same symptoms in a WPF app or in XamlPad. In the case of the app, it doesn't seem to make any difference whether I run in the debugger or if I run the executable directly. I applied the patch at this link: http://support.microsoft.com/kb/981741 and I thought that it had taken care of the issue, but it seems not to have. I have seen some posts that might indicate that using transparency might affect animation, but as you can see, my xaml does not use transparency. Can anyone give me some suggestions on how to determine what the problem is? Are there any WPF diagnostic tools that might help? UPDATE: I have checked my video drivers and they are the latest version. (nVidia GeForce 8400 GS)

  Read the article

• Regex slow on Windows Server 2008

  - by pjmyburg

  Hi I have a situation where my regular expressions compile extremely slowly on Windows Server 2008. I wrote a small console application to highlight this issue. The app generates its own input and builds up a Regex from words in an XML file. I built a release version of this app and ran it both on my personal laptop (running XP) and the Windows 2008 server. The regular expression took 0.21 seconds to compile on my laptop, but 23 seconds to compile on the server. Any ideas what could be causing this? The problem is only on first use of the Regex (when it is first compiled - thereafter it is fine) I have also found another problem - when using \s+ in the regular expression on the same Windows 2008 server, the memory balloons (uses 4GB+) and the compilation of the Regex never finishes. Is there a known issue with Regex and 64 bit .net? Is there a fix/patch available for this? I cannot really find any info on the net, but I have found a few articles about this same issues in Framework 2.0 - surely this has been fixed by now? More info: The server is running the 64 bit version of the .net framework (3.5 SP1) and on my laptop I have Visual Studio 2008 and the 3.5 framework installed. The regular expression is of the following pattern: ^word$|^word$|^word$ and is constructed with the following flags: RegexOptions.IgnoreCase | RegexOptions.Compiled Edit: Here is a code snippet: StringBuilder regexString = new StringBuilder(); if (!String.IsNullOrEmpty(fileLocation)) { XmlTextReader textReader = new XmlTextReader(fileLocation); textReader.Read(); while (textReader.Read()) { textReader.MoveToElement(); if (textReader.Name == "word") { regexString.Append("^" + textReader.GetAttribute(0) + "$|"); } } ProfanityFilter = new Regex(regexString.ToString(0, regexString.Length - 1), RegexOptions.IgnoreCase | RegexOptions.Compiled); } DateTime time = DateTime.Now; Console.WriteLine("\nIsProfane:\n" + ProfanityFilter.IsMatch("test")); Console.WriteLine("\nTime: " + (DateTime.Now - time).TotalSeconds); Console.ReadKey(); This results in a time of 0.21 seconds on my laptop and 23 seconds on the 2008 server. The XML file consists of 168 words in the following format: <word text="test" />

  Read the article

• jquery data selector

  - by Tauren

  I need to select elements based on values stored in an element's .data() object. At a minimum, I'd like to select top-level data properties using selectors, perhaps like this: $('a').data("category","music"); $('a:data(category=music)'); Or perhaps the selector would be in regular attribute selector format: $('a[category=music]'); Or in attribute format, but with a specifier to indicate it is in .data(): $('a[:category=music]'); I've found James Padolsey's implementation to look simple, yet good. The selector formats above mirror methods shown on that page. There is also this Sizzle patch. For some reason, I recall reading a while back that jQuery 1.4 would include support for selectors on values in the jquery .data() object. However, now that I'm looking for it, I can't find it. Maybe it was just a feature request that I saw. Is there support for this and I'm just not seeing it? Ideally, I'd like to support sub-properties in data() using dot notation. Like this: $('a').data("user",{name: {first:"Tom",last:"Smith"},username: "tomsmith"}); $('a[:user.name.first=Tom]'); I also would like to support multiple data selectors, where only elements with ALL specified data selectors are found. The regular jquery multiple selector does an OR operation. For instance, $('a.big, a.small') selects a tags with either class big or small). I'm looking for an AND, perhaps like this: $('a').data("artist",{id: 3281, name: "Madonna"}); $('a').data("category","music"); $('a[:category=music && :artist.name=Madonna]'); Lastly, it would be great if comparison operators and regex features were available on data selectors. So $(a[:artist.id>5000]) would be possible. I realize I could probably do much of this using filter(), but it would be nice to have a simple selector format. What solutions are available to do this? Is Jame's Padolsey's the best solution at this time? My concern is primarily in regards to performance, but also in the extra features like sub-property dot-notation and multiple data selectors. Are there other implementations that support these things or are better in some way?

  Read the article

• VS2008 C++ MFC Access Violation ONLY when stepping through debug mode

  - by HotOil

  Hi. This is crazy. It started happening in my main project, so I created a tiny sample brand-new project to reproduce it in and sure enough.. It does NOT happen in a sample project I created that is only a Win32 console app. I'm running this on Win7x64, if that matters. VS2008 SP1. Here goes. I create a small dialog app with a button. Put a breakpoint in the handler function for that button. The button handler function looks like this: void CTestProjectDlg::OnBnClickedButton1() { int i=2; m_csHello.Format(_T("Hello World!")); << breakpoint here UpdateData(FALSE); } Click the button, hit the breakpoint. F10 to step, and boom: "First-chance exception at 0x0398f77b in TestProject.exe: 0xC0000005: Access violation." It gives me the option to Break or Continue. If I Continue, it just hits it again, only not "First Chance". Yes I have that exception checked in the Debug-Exceptions dlg. If I Break, the call stack just shows me the line where the breakpoint is. If I F10 again.. I get the exception again, only now the callstack shows me in the _AfxDispatchCmdMsg() function, and my original OnBnClickedButton1() is not in the callstack anymore. It doesn't matter where I put the breakpoint. If, instead of F10, I just continue with F5, it works normally. Now.. if I build a Release version and run in debugging mode: I hit the breakpoint, and all the pointers, variable values look normal. F10, and these turn to garbage. The this pointer is now zero. The m_csHello is now However, in Release mode, an exception is not caught, and it all runs fine. The "hello World string gets displayed in the dialog box as it should. I have put in an inquiry to see if some patch was installed on my box by the IT dept in the last day or two. This wasn't happening 2 days ago. What do you think? Is VS2008 corrupted? Thanks.

  Read the article

• agent-based simulation: performance issue: Python vs NetLogo & Repast

  - by max

  I'm replicating a small piece of Sugarscape agent simulation model in Python 3. I found the performance of my code is ~3 times slower than that of NetLogo. Is it likely the problem with my code, or can it be the inherent limitation of Python? Obviously, this is just a fragment of the code, but that's where Python spends two-thirds of the run-time. I hope if I wrote something really inefficient it might show up in this fragment: UP = (0, -1) RIGHT = (1, 0) DOWN = (0, 1) LEFT = (-1, 0) all_directions = [UP, DOWN, RIGHT, LEFT] # point is just a tuple (x, y) def look_around(self): max_sugar_point = self.point max_sugar = self.world.sugar_map[self.point].level min_range = 0 random.shuffle(self.all_directions) for r in range(1, self.vision+1): for d in self.all_directions: p = ((self.point[0] + r * d[0]) % self.world.surface.length, (self.point[1] + r * d[1]) % self.world.surface.height) if self.world.occupied(p): # checks if p is in a lookup table (dict) continue if self.world.sugar_map[p].level > max_sugar: max_sugar = self.world.sugar_map[p].level max_sugar_point = p if max_sugar_point is not self.point: self.move(max_sugar_point) Roughly equivalent code in NetLogo (this fragment does a bit more than the Python function above): ; -- The SugarScape growth and motion procedures. -- to M ; Motion rule (page 25) locals [ps p v d] set ps (patches at-points neighborhood) with [count turtles-here = 0] if (count ps > 0) [ set v psugar-of max-one-of ps [psugar] ; v is max sugar w/in vision set ps ps with [psugar = v] ; ps is legal sites w/ v sugar set d distance min-one-of ps [distance myself] ; d is min dist from me to ps agents set p random-one-of ps with [distance myself = d] ; p is one of the min dist patches if (psugar >= v and includeMyPatch?) [set p patch-here] setxy pxcor-of p pycor-of p ; jump to p set sugar sugar + psugar-of p ; consume its sugar ask p [setpsugar 0] ; .. setting its sugar to 0 ] set sugar sugar - metabolism ; eat sugar (metabolism) set age age + 1 end On my computer, the Python code takes 15.5 sec to run 1000 steps; on the same laptop, the NetLogo simulation running in Java inside the browser finishes 1000 steps in less than 6 sec. EDIT: Just checked Repast, using Java implementation. And it's also about the same as NetLogo at 5.4 sec. Recent comparisons between Java and Python suggest no advantage to Java, so I guess it's just my code that's to blame? EDIT: I understand MASON is supposed to be even faster than Repast, and yet it still runs Java in the end.

  Read the article

• What's the correct way to use Cakephp urls?

  - by Pichan

  Hello all, it's my first post here :) I'm having some difficulties with dealing with urls and parameters. I've gone through the router class api documentation over and over again and found nothing useful. First of all, I'd like to know if there is any 'universal' format in CakePHP(1.3) for handling urls. I'm currently handling all my urls as simple arrays(in the format that Router::url and $html-link accepts) and it's easy as long as I only need to pass them as arguments to cake's own methods. It usually gets tricky if I need something else. Mainly I'm having problems with converting string urls to the basic array format. Let's say I want to convert $arrayUrl to string and than again into url: $arrayUrl=array('controller'=>'SomeController','action'=>'someAction','someValue'); $url=Router::url($arrayUrl); //$url is now '/path/to/site/someController/someAction/someValue' $url=Router::normalize($url); //remove '/path/to/site' $parsed=Router::parse($url); /*$parsed is now Array( [controller] => someController [action] => someAction [named] => Array() [pass] => Array([0] => someValue) [plugin] => ) */ That seems an awful lot of code to do something as simple as to convert between 2 core formats. Also, note that $parsed is still not in the same as $arrayUrl. Of course I could tweak $parsed manually and actually I've done that a few times as a quick patch but I'd like to get to the bottom of this. I also noticed that when using prefix routing, $this-params in controller has the prefix embedded in the action(i.e. [action] = 'admin_edit') and the result of Router::parse() does not. Both of course have the prefix in it's own key. To summarize, how do I convert an url between any of these 3(or 4, if you include the prefix thing) mentioned formats the right way? Of course it would be easy to hack my way through this, but I'd still like to believe that cake is being developed by a bunch of people who have a lot more experience and insight than me, so I'm guessing there's a good reason for this "perceived misbehavior". I've tried to present my problem as good as I can, but due to my rusty english skills, I had to take a few detours :) I'll explain more if needed.

  Read the article

• Is this scatter-brained workflow realizable in Git?

  - by Luke Maurer

  This is what I'd like my workflow to look like at a conceptual level: I hack on my new feature for a while I notice a typo in a comment I change it Since the typo is completely unrelated to anything else, I put that change in a pile of comment fixes I keep working on the code I realize I need to flesh out a few utility functions I do so I put that change in its own pile Steps 2, 3, and 4 each repeat throughout the day I finish the new feature and put the changes for that feature in a pile I push nice patches upstream: One with the new feature, a few for the other tweaks, and one with a bunch of comment fixes if enough have accumulated Since I'm both lazy and a perfectionist, I want to be able to do some things out of order: I might correct a typo but forget to put it in the comment fix pile; when I prepare the upstream patches (I'm using git-svn, so I need to be pretty deliberate about these), I'll then pull out the comment fixes at that point. I might forget to separate things altogether until the very end. But I might /also/ have committed some of the piles along the way (sorry, the metaphor is breaking down …). This is all rather like just using Eclipse changesets with SVN, only I can have different changes to the same file in different piles (having to disentangle changes into different commits is what motivated me to move to git-svn, in fact …), and with Git I can have my full discombobulated change history, experimental branches and all, but still make a nice, neat patch. I've just recently started with Git after having wanted to for a good while, and I'm quite happy so far. The biggest way in which the above workflow doesn't really map into Git, though, is that a “bin” can't really be just a local branch, since the working tree only ever reflects the state of a single branch. Or maybe the Git index is a “pile,” and what I want is to have more than one somehow (effectively). I can think of a few ways to approximate what I want (maybe creative use of stash? Intricate stash-checkout-merge dances?), but my grasp on Git isn't solid enough to be sure of how best to put all the pieces together. It's said that Git is more a toolkit than a VCS, so I guess the question comes down to: How do I build this thing with these tools?

  Read the article

• Profile memory-performance for part of an rails project

  - by Florian Pilz

  I want to test the profile usage of an important library-class of my rails-project. It uses ActiveRecord so I need all rails dependencies to profile it. As far as I know, I need a patched ruby (rubygc) so script/profile and script/benchmark can track memory usage. I tried to follow this official guide to patch the source code of ruby 1.8.6 (p399) and 1.8.7 (p248), but both fail with the following message: patching file gc.c Hunk #2 succeeded at 50 with fuzz 2 (offset 2 lines). Hunk #3 succeeded at 87 with fuzz 2 (offset 6 lines). Hunk #4 succeeded at 153 with fuzz 1 (offset 45 lines). Hunk #5 succeeded at 409 with fuzz 2 (offset 274 lines). Hunk #6 FAILED at 462. Hunk #7 FAILED at 506. Hunk #8 FAILED at 520. Hunk #9 FAILED at 745. Hunk #10 FAILED at 754. Hunk #11 FAILED at 923. Hunk #12 succeeded at 711 (offset 46 lines). Hunk #13 succeeded at 730 (offset 46 lines). Hunk #14 succeeded at 766 (offset 55 lines). Hunk #15 succeeded at 1428 (offset 87 lines). Hunk #16 succeeded at 1492 (offset 89 lines). Hunk #17 FAILED at 1541. Hunk #18 FAILED at 1551. Hunk #19 succeeded at 1571 (offset 91 lines). Hunk #20 succeeded at 1592 (offset 91 lines). Hunk #21 succeeded at 1601 (offset 91 lines). Hunk #22 succeeded at 1826 (offset 108 lines). Hunk #23 succeeded at 1843 (offset 108 lines). Hunk #24 succeeded at 1926 (offset 108 lines). Hunk #25 succeeded at 2118 (offset 108 lines). Hunk #26 succeeded at 2563 (offset 100 lines). Hunk #27 succeeded at 2611 with fuzz 1 (offset 102 lines). Hunk #28 succeeded at 2628 (offset 102 lines). 8 out of 28 hunks FAILED -- saving rejects to file gc.c.rej patching file intern.h Hunk #1 succeeded at 268 (offset 15 lines). I also tried to use ruby-prof, but I always get the error "uninitialized constant RubyProf::Test". I don't know how to use the gem "memory" and neither "memprof" nor "bleak_house" could be installed successfully. If I get a patched ruby running, I should be fine. But any other possibility to profile the memory of library classes are welcome. Thanks for helping!

  Read the article

• Drupal incorrectly escapes tags in javascript

  - by sergdev

  I installed drupal-6.16. I applied the patch from the post http://drupal.org/node/222926#comment-930745. It works correctly in simple cases. But following code of counter is handled incorrectly and counter is now displayed on the page after drupal. Drupal modifies the string "alt='1Gb.ua counter' /><\/a>")</a></script> to "alt='1Gb.ua counter' />&lt;\/a>")</a></script> The full code of counter follows: <br><br> Text <br><br> <!-- counter.1Gb.ua --> <script language="javascript" type="text/javascript"> cgb_js="1.0"; cgb_r=""+Math.random()+"&r="+ escape(document.referrer)+"&pg="+ escape(window.location.href); document.cookie="rqbct=1; path=/"; cgb_r+="&c="+ (document.cookie?"Y":"N"); </script><script language="javascript1.1" type="text/javascript"> cgb_js="1.1";cgb_r+="&j="+ (navigator.javaEnabled()?"Y":"N")</script> <script language="javascript1.2" type="text/javascript"> cgb_js="1.2"; cgb_r+="&wh="+screen.width+ 'x'+screen.height+"&px="+ (((navigator.appName.substring(0,3)=="Mic"))? screen.colorDepth:screen.pixelDepth)</script> <script language="javascript1.3" type="text/javascript"> cgb_js="1.3"</script> <script language="javascript" type="text/javascript">cgb_r+="&js="+cgb_js; document.write("<a href='http://www.1Gb.ua?cnt=1416'>"+ "<img src='http://counter.1Gb.ua/cnt.aspx?"+ "u=1416&"+cgb_r+ "&' border=0 width=88 height=31 "+ "alt='1Gb.ua counter'><\/a>")</script> <noscript><a href='http://www.1Gb.ua?cnt=1416'> <img src="http://counter.1Gb.ua/cnt.aspx?u=1416" border=0 width="88" height="31" alt="1Gb.ua counter"></a> </noscript> <!-- /counter.1Gb.ua --> Does anybody have this code working? How can it be fixed? Thanks a lot in advance!

  Read the article

• How to set which version of the VC++ runtime Visual Studio 2005 targets

  - by TallGuy

  I have an application that contains a VC++ project (along with C# projects). Previously, (i.e. during the last year or so) when a build has been done, Visual Studio 2005 appears to be targeting the VC++ runtime version 8.0.50727.762. At least, that is what the Assembly.dll.intermediate.manifest file is telling me: <?xml version='1.0' encoding='UTF-8' standalone='yes'?> <assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='Microsoft.VC80.CRT' version='8.0.50727.762' processorArchitecture='x86' publicKeyToken='1fc8b3b9a1e18e3b' /> </dependentAssembly> </dependency> </assembly> This version number matches the Visual Studio 2005 version number. The application worked fine when deployed to the webserver. The sun was shining, the birds were singing and all was right with the world. Now something has changed. I don't know what - a security patch, an obscure Visual Studio setting or something. Now Visual Studio 2005 seems to be targeting the wrong version of the VC++ runtime: <?xml version='1.0' encoding='UTF-8' standalone='yes'?> <assembly xmlns='urn:schemas-microsoft-com:asm.v1' manifestVersion='1.0'> <dependency> <dependentAssembly> <assemblyIdentity type='win32' name='Microsoft.VC80.CRT' version='8.0.50727.4053' processorArchitecture='x86' publicKeyToken='1fc8b3b9a1e18e3b' /> </dependentAssembly> </dependency> </assembly> When I deploy the application to the webserver, I get the dreaded This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem. (Exception from HRESULT: 0x800736B1) error. This problem occurs even when I recompile previous versions of the application. I can absolutely guarantee that nothing at all has changed in the solution - we zip up the entire contents of the solution as part of the build process and archive it. I have unzipped a number of these to a temp directory, verified that the previous manifest file refers to 8.0.50727.762, recompiled using exactly the same command at the command line and then verified that the new manifest file now refers to 8.0.50727.4053. I am using Microsoft Visual Studio 2005 Version 8.0.50727.762 (SP.050727-7600) and Microsoft Visual C++ 2005 77646-008-0000007-41610. Why would Visual Studio revert to a previous version of the VC++ runtime? How do I specify which version it should use? What is going wrong here?

  Read the article

• Convert NSData into Hex NSString

  - by Dawson

  With reference to the following question: Convert NSData into HEX NSSString I have solved the problem using the solution provided by Erik Aigner which is: NSData *data = ...; NSUInteger capacity = [data length] * 2; NSMutableString *stringBuffer = [NSMutableString stringWithCapacity:capacity]; const unsigned char *dataBuffer = [data bytes]; NSInteger i; for (i=0; i<[data length]; ++i) { [stringBuffer appendFormat:@"%02X", (NSUInteger)dataBuffer[i]]; } However, there is one small problem in that if there are extra zeros at the back, the string value would be different. For eg. if the hexa data is of a string @"3700000000000000", when converted using a scanner to integer: unsigned result = 0; NSScanner *scanner = [NSScanner scannerWithString:stringBuffer]; [scanner scanHexInt:&result]; NSLog(@"INTEGER: %u",result); The result would be 4294967295, which is incorrect. Shouldn't it be 55 as only the hexa 37 is taken? So how do I get rid of the zeros? EDIT: (In response to CRD) Hi, thanks for clarifying my doubts. So what you're doing is to actually read the 64-bit integer directly from a byte pointer right? However I have another question. How do you actually cast NSData to a byte pointer? To make it easier for you to understand, I'll explain what I did originally. Firstly, what I did was to display the data of the file which I have (data is in hexadecimal) NSData *file = [NSData dataWithContentsOfFile:@"file path here"]; NSLog(@"Patch File: %@",file); Output: Next, what I did was to read and offset the first 8 bytes of the file and convert them into a string. // 0-8 bytes [file seekToFileOffset:0]; NSData *b = [file readDataOfLength:8]; NSUInteger capacity = [b length] * 2; NSMutableString *stringBuffer = [NSMutableString stringWithCapacity:capacity]; const unsigned char *dataBuffer = [b bytes]; NSInteger i; for (i=0; i<[b length]; ++i) { [stringBuffer appendFormat:@"%02X", (NSUInteger)dataBuffer[i]]; } NSLog(@"0-8 bytes HEXADECIMAL: %@",stringBuffer); As you can see, 0x3700000000000000 is the next 8 bytes. The only changes I would have to make to access the next 8 bytes would be to change the value of SeekFileToOffset to 8, so as to access the next 8 bytes of data. All in all, the solution you gave me is useful, however it would not be practical to enter the hexadecimal values manually. If formatting the bytes as a string and then parsing them is not the way to do it, then how do I access the first 8 bytes of the data directly and cast them into a byte pointer?

  Read the article

• Memory Leak with jQuery UI inside UpdatePanel in ie7

  - by Ryan

  I have a fairly complex asp.net page based on UpdatePanels and jQuery UI. Unfortunately, when the panels update, the jQuery UI widgets leak memory like crazy in ie7, even if I manually 'destroy' them. Does anyone know a technique/patch to prevent these leaks? I've created a simple example page with a slider inside an UpdatePanel. Just click the 'Leak' button and refresh the page to see the leak in sieve. <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Leak2.aspx.cs" Inherits="Leak2" %> <%@ Register Assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Namespace="System.Web.UI" TagPrefix="asp" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head runat="server"> <title>Leak</title> <link type="text/css" href="/jquery/css/custom-theme/jquery-ui-1.7.2.custom.css" rel="Stylesheet" /> <script type="text/javascript" src="/jquery/js/jquery-1.3.2.min.js"></script> <script type="text/javascript" src="/jquery/js/jquery-ui-1.7.2.custom.min.js"></script> </head> <body> <form id="form1" runat="server"> <div> <script type="text/javascript"> function initializeSlider() { $(".slider").slider({ min: 0, max: 100, value: 100, step: 5 }); } $(document).ready(function() { initializeSlider(); Sys.WebForms.PageRequestManager.getInstance().add_endRequest(function() { initializeSlider(); }); }); </script> <asp:ScriptManager ID="ScriptManager1" runat="server"></asp:ScriptManager> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <ContentTemplate> <div style="width: 300px;"> <div class="slider"></div> <asp:Button ID="Button1" runat="server" OnClick="Button1_Click" Text="Leak" /> </div> </ContentTemplate> </asp:UpdatePanel> </div> </form> </body> </html>

  Read the article

• Using XmlDiffPatch when writing to stream

  - by Mark Smith

  I am trying to use xmldiffpatch when comparing two Xmls(one from a stream, the other from a file) and writing the diff patch to a stream. The first method is to write my xml to a memory stream. The second method loads an xml from a file and creates a stream for the patched file to be written into. The third method actually compares the two files and writes the third. The xmldiff.Compare(originalFile, finalFile, dgw); method takes (XmlReader, XmlReader, XmlWriter). I'm always getting that both files are identical, even though they are not, so I know that I am missing something. Any help is appreciated! public MemoryStream FirstXml() { string[] names = { "John", "Mohammed", "Marc", "Tamara", "joy" }; MemoryStream ms = new MemoryStream(); XmlTextWriter xtw= new XmlTextWriter(ms, Encoding.UTF8); xtw.WriteStartDocument(); xtw.WriteStartElement("root"); foreach (string s in names) { xtw.WriteStartElement(s); xtw.WriteEndElement(); } xtw.WriteEndElement(); xtw.WriteEndDocument(); return ms; } public Stream SecondXml() { XmlReader finalFile =XmlReader.Create(@"c:\......\something.xml"); MemoryStream ms = FirstXml(); XmlReader originalFile = XmlReader.Create(ms); MemoryStream ms2 = new MemoryStream(); XmlTextWriter dgw = new XmlTextWriter(ms2, Encoding.UTF8); GenerateDiffGram(originalFile, finalFile, dgw); return ms2; } public void GenerateDiffGram(XmlReader originalFile, XmlReader finalFile, XmlWriter dgw) { XmlDiff xmldiff = new XmlDiff(); bool bIdentical = xmldiff.Compare(originalFile, finalFile, dgw); dgw.Close(); StreamReader sr = new StreamReader(SecondXml()); string xmlOutput = sr.ReadToEnd(); if(xmlOutput.Contains("</xd:xmldiff>")) {Console.WriteLine("Xml files are not identical"); Console.Read();} else {Console.WriteLine("Xml files are identical");Console.Read();} }

  Read the article

• What to Expect in Rails 4

  - by mikhailov

  Rails 4 is nearly there, we should be ready before it released. Most developers are trying hard to keep their application on the edge. Must see resources: 1) @sikachu talk: What to Expect in Rails 4.0 - YouTube 2) Rails Guides release notes: http://edgeguides.rubyonrails.org/4_0_release_notes.html There is a mix of all major changes down here: ActionMailer changes excerpt: Asynchronously send messages via the Rails Raise an ActionView::MissingTemplate exception when no implicit template could be found ActionPack changes excerpt Added controller-level etag additions that will be part of the action etag computation Add automatic template digests to all CacheHelper#cache calls (originally spiked in the cache_digests plugin) Add Routing Concerns to declare common routes that can be reused inside others resources and routes Added ActionController::Live. Mix it in to your controller and you can stream data to the client live truncate now always returns an escaped HTML-safe string. The option :escape can be used as false to not escape the result Added ActionDispatch::SSL middleware that when included force all the requests to be under HTTPS protocol ActiveModel changes excerpt AM::Validation#validates ability to pass custom exception to :strict option Changed `AM::Serializers::JSON.include_root_in_json' default value to false. Now, AM Serializers and AR objects have the same default behaviour Added ActiveModel::Model, a mixin to make Ruby objects work with AP out of box Trim down Active Model API by removing valid? and errors.full_messages ActiveRecord changes excerpt Use native mysqldump command instead of structure_dump method when dumping the database structure to a sql file. Attribute predicate methods, such as article.title?, will now raise ActiveModel::MissingAttributeError if the attribute being queried for truthiness was not read from the database, instead of just returning false ActiveRecord::SessionStore has been extracted from Active Record as activerecord-session_store gem. Please read the README.md file on the gem for the usage Fix reset_counters when there are multiple belongs_to association with the same foreign key and one of them have a counter cache Raise ArgumentError if list of attributes to change is empty in update_all Add Relation#load. This method explicitly loads the records and then returns self Deprecated most of the 'dynamic finder' methods. All dynamic methods except for find_by_... and find_by_...! are deprecated Added ability to ActiveRecord::Relation#from to accept other ActiveRecord::Relation objects Remove IdentityMap ActiveSupport changes excerpt ERB::Util.html_escape now escapes single quotes ActiveSupport::Callbacks: deprecate monkey patch of object callbacks Replace deprecated memcache-client gem with dalli in ActiveSupport::Cache::MemCacheStore Object#try will now return nil instead of raise a NoMethodError if the receiving object does not implement the method, but you can still get the old behavior by using the new Object#try! Object#try can't call private methods Add ActiveSupport::Deprecations.behavior = :silence to completely ignore Rails runtime deprecations What are the most important changes for you?

  Read the article

• Drupal incorrectly espaces tags in javascript

  - by sergdev

  I installed drupal-6.16. I applied the patch from the post http://drupal.org/node/222926#comment-930745. It works correctly in simple cases. But for following code for counter is handled incorrectly: <br><br> Text <br><br> <!-- counter.1Gb.ua --> <script language="javascript" type="text/javascript"> cgb_js="1.0"; cgb_r=""+Math.random()+"&r="+ escape(document.referrer)+"&pg="+ escape(window.location.href); document.cookie="rqbct=1; path=/"; cgb_r+="&c="+ (document.cookie?"Y":"N"); </script><script language="javascript1.1" type="text/javascript"> cgb_js="1.1";cgb_r+="&j="+ (navigator.javaEnabled()?"Y":"N")</script> <script language="javascript1.2" type="text/javascript"> cgb_js="1.2"; cgb_r+="&wh="+screen.width+ 'x'+screen.height+"&px="+ (((navigator.appName.substring(0,3)=="Mic"))? screen.colorDepth:screen.pixelDepth)</script> <script language="javascript1.3" type="text/javascript"> cgb_js="1.3"</script> <script language="javascript" type="text/javascript">cgb_r+="&js="+cgb_js; document.write("<a href='http://www.1Gb.ua?cnt=1416'>"+ "<img src='http://counter.1Gb.ua/cnt.aspx?"+ "u=1416&"+cgb_r+ "&' border=0 width=88 height=31 "+ "alt='1Gb.ua counter'><\/a>")</script> <noscript><a href='http://www.1Gb.ua?cnt=1416'> <img src="http://counter.1Gb.ua/cnt.aspx?u=1416" border=0 width="88" height="31" alt="1Gb.ua counter"></a> </noscript> <!-- /counter.1Gb.ua --> It modifies the string "alt='1Gb.ua counter' /><\/a>")</a></script> to "alt='1Gb.ua counter' />&lt;\/a>")</a></script> Does anybody have this code working? If so how this can be fixed? Thanks a lot in advance!

  Read the article

• Search row with highest number of cells in a row with colspan

  - by user593029

  What is the efficient way to search highest number of cells in big table with numerous colspan (merge cells ** colspan should be ignored so in below example highest number of cells is 4 in first row). Is it js/jquery with reg expression or just the loop with bubble sorting. I got one link as below explainig use of regex is it ideal way ... can someone suggest pseudo code for this. High cpu consumption due to a jquery regex patch <table width="156" height="84" border="0" > <tbody> <tr style="height:10px"> <td width="10" style="width:10px; height:10px"/> <td width="10" style="width:10px; height:10px"/> <td width="10" style="width:10px; height:10px"/> <td width="10" style="width:10px; height:10px"/> </tr> <tr style="height:10px"> <td width="10" style="width:10px; height:10px" colspan="2"/> <td width="10" style="width:10px; height:10px"/> <td width="10" style="width:10px; height:10px"/> </tr> <tr style="height:10px"> <td width="10" style="width:10px; height:10px"/> <td width="10" style="width:10px; height:10px"/> <td width="10" style="width:10px; height:10px" colspan="2"/> </tr> <tr style="height:10px"> <td width="10" style="width:10px; height:10px" colspan="2"/> <td width="10" style="width:10px; height:10px"/> <td width="10" style="width:10px; height:10px"/> </tr> </tbody> </table>

  Read the article

• ZF Autoloader to load ancestor and requested class

  - by Pekka

  I am integrating Zend Framework into an existing application. I want to switch the application over to Zend's autoloading mechanism to replace dozens of include() statements. I have a specific requirement for the autoloading mechanism, though. Allow me to elaborate. The existing application uses a core library (independent from ZF), for example: /Core/Library/authentication.php /Core/Library/translation.php /Core/Library/messages.php this core library is to remain untouched at all times and serves a number of applications. The library contains classes like class ancestor_authentication { ... } class ancestor_translation { ... } class ancestor_messages { ... } in the application, there is also a Library directory: /App/Library/authentication.php /App/Library/translation.php /App/Library/messages.php these includes extend the ancestor classes and are the ones that actually get instantiated in the application. class authentication extends ancestor_authentication { } class translation extends ancestor_translation { } class messages extends ancestor_messages { } usually, these class definitions are empty. They simply extend their ancestors and provide the class name to instantiate. $authentication = new authentication(); The purpose of this solution is to be able to easily customize aspects of the application without having to patch the core libraries. Now, the autoloader I need would have to be aware of this structure. When an object of the class authentication is requested, the autoloader would have to: 1. load /Core/Library/authentication.php 2. load /App/Library/authentication.php My current approach would be creating a custom function, and binding that to Zend_Loader_Autoloader for a specific namespace prefix. Is there already a way to do this in Zend that I am overlooking? The accepted answer in this question kind of implies there is, but that may be just a bad choice of wording. Are there extensions to the Zend Autoloader that do this? Can you - I am new to ZF - think of an elegant way, conforming with the spirit of the framework, of extending the Autoloader with this functionality? I'm not necessary looking for a ready-made implementation, some pointers (This should be an extension to the xyz method that you would call like this...) would already be enough.

  Read the article

• Publishing/subscribing multiple subsets of the same server collection

  - by matb33

  How does one go about publishing different subsets (or "views") of a single collection on the server as multiple collections on the client? Here is some pseudo-code to help illustrate my question: items collection on the server Assume that I have an items collection on the server with millions of records. Let's also assume that: 50 records have the enabled property set to true, and; 100 records have the processed property set to true. All others are set to false. items: { "_id": "uniqueid1", "title": "item #1", "enabled": false, "processed": false }, { "_id": "uniqueid2", "title": "item #2", "enabled": false, "processed": true }, ... { "_id": "uniqueid458734958", "title": "item #458734958", "enabled": true, "processed": true } Server code Let's publish two "views" of the same server collection. One will send down a cursor with 50 records, and the other will send down a cursor with 100 records. There are over 458 million records in this fictitious server-side database, and the client does not need to know about all of those (in fact, sending them all down would probably take several hours in this example): var Items = new Meteor.Collection("items"); Meteor.publish("enabled_items", function () { // Only 50 "Items" have enabled set to true return Items.find({enabled: true}); }); Meteor.publish("processed_items", function () { // Only 100 "Items" have processed set to true return Items.find({processed: true}); }); Client code In order to support the latency compensation technique, we are forced to declare a single collection Items on the client. It should become apparent where the flaw is: how does one differentiate between Items for enabled_items and Items for processed_items? var Items = new Meteor.Collection("items"); Meteor.subscribe("enabled_items", function () { // This will output 50, fine console.log(Items.find().count()); }); Meteor.subscribe("processed_items", function () { // This will also output 50, since we have no choice but to use // the same "Items" collection. console.log(Items.find().count()); }); My current solution involves monkey-patching _publishCursor to allow the subscription name to be used instead of the collection name. But that won't do any latency compensation. Every write has to round-trip to the server: // On the client: var EnabledItems = new Meteor.Collection("enabled_items"); var ProcessedItems = new Meteor.Collection("processed_items"); With the monkey-patch in place, this will work. But go into Offline mode and changes won't appear on the client right away -- we'll need to be connected to the server to see changes. What's the correct approach?

  Read the article

• Difference in displaying inner div between IE and Chrome

  - by Gaara

  I have this code that has one "outerDIV" that contains an "innerDIV". On chrome the "innerDIV" size is 491px, whereas on IE it is 425px (same as outerDIV). Hence, on Chrome I can see the first two children of "innerdiv": "My test string #1" and "test2". But for IE I can only see the first child. I am not quite sure what the "right" behavior should be, as firefox does the same as IE. However I would like to have IE do the same as Chrome. I have been experimenting with some css styles (mainly overflow and display), but still can't make it right: IE will expand its height instead of its width to make the elements fit. Can you guys help me figure out a way to change the css so that IE will wraps the div elements inline? As a restriction though, I cannot change the width on the HTML. As a benefit, I am using a css that only loads for IE to patch these kind of IE inconsistencies. The same css will NOT load for chrome, so I don't need to worry about messing with chrome when changing the IE CSS. Thanks in advance! <html> <head> <style type="text/css"> <!-- body { font-family: helvetica; } .myContainer { overflow: hidden; border: 1px solid rgba(0, 0, 0, .5); font-size: 14pt; height: 49px; line-height: 49px; overflow: hidden; display: block; } .myContainer > DIV { float: left; white-space: nowrap; display: block; } .myContainer .item:first-child { padding-left: 10px; } .myContainer .item { float: left; padding-right: 32px; } --> </style> </head> <body> <div id="outerDIV" class="myContainer" style="display: block; width: 425px;"> <div id="innerDIV"> <div class="item"> --------My test string #1-------- </div> <div class="item"> ------test2------- </div> <div class="item"> test </div> </div> </div> </body> </html>

  Read the article

< Previous Page | 473 474 475 476 477 478 479 480 481 482 483 484  | Next Page >