Search Results

Search found 19412 results on 777 pages for 'multiple resultsets'.

Page 479/777 | < Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >

• Speed up loading of test results from builds in Visual Studio

  - by Jakob Ehn

  I still see people complaining about the long time it takes to load test results from a TFS build in Visual Studio. And they make a valid point, it does take a very long time to load the test results, even for a small number of tests. The reason for this is that the test results is not just the result of the test run but also all the binaries that were part of the test run. This often also means that the debug symbols (*.pdb) will be downloaded to your local machine. This reason for this behaviour is that it letsyou re-run the tests locally. However, most of the times this is not what the developer will do, they just want to know which tests failed and why. They can then fix the tests and rerun them locally. It turns out there is a way to load only the test results, which is much faster. The only tricky bit is to find the location of the .trx file that is generated during the build. Particularly in TFS 2010 where you often have multiple build agents, which of corse results in different paths to the trx file. Note: To use this you must have read permission to the build folder on the build agent where the build was executed. Open the build result for the build Click View Log Locate the part where MSTest is invoked. When using test containers, it looks like this:   Note: You can actually search in the log window, press Ctrl+F and you will get a little search box at the bottom. Nice! On the MSTest command line call, locate the /resultsfileroot parameter, which points to the folder where the test results are stored Note that this path is local for the build server, so you need to replace the drive letter with the server name: D:\Builds\Project\TestResults to \Project\TestResults">\\<BuildServer>\Project\TestResults Double-click on the .trx file and you will notice that it loads much faster compared to opening it from the build log window

  Read the article

• Precising definition of programming paradigm

  - by Kazark

  Wikipedia defines programming paradigm thus: a fundamental style of computer programming which is echoed in the descriptive text of the paradigms tag on this site. I find this a disappointing definition. Anyone who knows the words programming and paradigm could do about that well without knowing anything else about it. There are many styles of computer programming at many level of abstraction; within any given programming paradigm, multiple styles are possible. For example, Bob Martin says in Clean Code (13), Consider this book a description of the Object Mentor School of Clean Code. The techniques and teachings within are the way that we practice our art. We are willing to claim that if you follow these teachings, you will enjoy the benefits that we have enjoyed, and you will learn to write code that is clean and professional. But don't make the mistake of thinking that we are somehow "right" in any absolute sense. Thus Bob Martin is not claiming to have the correct style of Object-Oriented programming, even though he, if anyone, might have some claim to doing so. But even within his school of programming, we might have different styles of formatting the code (K&R, etc). There are many styles of programming at many levels. Sp how can we define programming paradigm rigorously, to distinguish it from other categories of programming styles? Fundamental is somewhat helpful, but not specific. How can we define the phrase in a way that will communicate more than the separate meanings of each of the two words—in other words, how can we define it in a way that will provide additional meaning for someone who speaks English but isn't familiar with a variety of paradigms?

  Read the article

• Is "as long as it works" the norm?

  - by q303

  Hi, My last shop did not have a process. Agile essentially meant they did not have a plan at all about how to develop or manage their projects. It meant "hey, here's a ton of work. Go do it in two weeks. We're fast paced and agile." They released stuff that they knew had problems. They didn't care how things were written. There were no code reviews--despite there being several developers. They released software they knew to be buggy. At my previous job, people had the attitude as long as it works, it's fine. When I asked for a rewrite of some code I had written while we were essentially exploring the spec, they denied it. I wanted to rewrite the code because code was repeated in multiple places, there was no encapsulation and it took people a long time to make changes to it. So essentially, my impression is this: programming boils down to the following: Reading some book about the latest tool/technology Throwing code together based on this, avoiding writing any individual code because the company doesn't want to "maintain custom code" Showing it and moving on to the next thing, "as long as it works." I've always told myself that next job I'm going to get a better shop. It never happens. If this is it, then I feel stuck. The technologies always change; if the only professional development here is reading the latest MS Press technology book, then what have you built in 10 years but a superficial knowledge of various technologies? I'm concerned about: Best way to have professional standards How to develop meaningful knowledge and experience in this situation

  Read the article

• When not to use Spring to instantiate a bean?

  - by Rishabh

  I am trying to understand what would be the correct usage of Spring. Not syntactically, but in term of its purpose. If one is using Spring, then should Spring code replace all bean instantiation code? When to use or when not to use Spring, to instantiate a bean? May be the following code sample will help in you understanding my dilemma: List<ClassA> caList = new ArrayList<ClassA>(); for (String name : nameList) { ClassA ca = new ClassA(); ca.setName(name); caList.add(ca); } If I configure Spring it becomes something like: List<ClassA> caList = new ArrayList<ClassA>(); for (String name : nameList) { ClassA ca = (ClassA)SomeContext.getBean(BeanLookupConstants.CLASS_A); ca.setName(name); caList.add(ca); } I personally think using Spring here is an unnecessary overhead, because The code the simpler to read/understand. It isn't really a good place for Dependency Injection as I am not expecting that there will be multiple/varied implementation of ClassA, that I would like freedom to replace using Spring configuration at a later point in time. Am I thinking correct? If not, where am I going wrong?

  Read the article

• What is "2LUN" mode in connection with RAID?

  - by naxa

  I've came across RAID products that also list JBOD (just a bunch of disks) mode and 2LUN mode. What the heck is 2LUN mode? I could not find a description; the closest thing seems to be LUN 'logical unit number' but I don't get the 2LUN thing. UPDATE 1 This is what Wikipedia has to say about JBOD: JBOD (derived from "just a bunch of disks"): an architecture involving multiple hard drives, while making them accessible either as independent hard drives, or as a combined (spanned) single logical volume with no actual RAID functionality. So JBOD can actually mean two different (albeit related) things. Answer of Guest says 2LUN means no spanning. Does this suggest that 2LUN would simply mean the JBOD-variant with no span?

  Read the article

• Will a polled event system cause lag for a server?

  - by Milo

  I'm using a library called ENet. It is a reliable UDP library. The way it works is a polled event system like this: ENetEvent event; /* Wait up to 1000 milliseconds for an event. */ while (enet_host_service (client, & event, 1000) > 0) { switch (event.type) { case ENET_EVENT_TYPE_CONNECT: printf ("A new client connected from %x:%u.\n", event.peer -> address.host, event.peer -> address.port); /* Store any relevant client information here. */ event.peer -> data = "Client information"; break; case ENET_EVENT_TYPE_RECEIVE: printf ("A packet of length %u containing %s was received from %s on channel %u.\n", event.packet -> dataLength, event.packet -> data, event.peer -> data, event.channelID); /* Clean up the packet now that we're done using it. */ enet_packet_destroy (event.packet); break; case ENET_EVENT_TYPE_DISCONNECT: printf ("%s disconected.\n", event.peer -> data); /* Reset the peer's client information. */ event.peer -> data = NULL; } } It waits up to 1000 milliseconds for an event. If I'm hosting say 75 event driven card games and a lobby on the same thread as this code, will it cause any problems. If my understanding is correct, the process will simply sleep until there is an event, when there is one, it will process the event then come back here where potentially 5 or so events have queued up since so enet_host_services would return right away and not cause lag. I have been advised not to use multiple threads, will that be alright like this? Thanks

  Read the article

• Game editor integration with the engine?

  - by Daniel

  What I am trying to figure out is what is the best way to integrate the editor(level, effects, model, etc...) in the most effective way? Now the first thing I thought would be to create the game engine(*) extremely modular. For example I took the example of game states. You could have multiple game states that all have their own update() and draw() methods among others. Each game state class would inherit from a base GameState class. This allows for a more modular approach and a useful one at that. Now would the most efficient approach be to implement the editor along with the modular engine, or create two different designs for both the game, and editor? I thought to take the game state example and extend it to window states, and well could be used for a lot more systems. Is there a better implementation of this design(game state) for use in other systems used in the engine? *: Now I know the term game engine is sorta irrelevant, and misused in many situations. What I am referring to as the "game engine" is the combination of the systems that the game must interact with for short. Also this is more of a theory / design question than an implementation. Even though both mix, i'd rather like to have a more general idea on how the editor is built in an efficient way and still using the same engine code as what the game uses. Thanks, Daniel P.S If you need more clarification or extra bits just leave a comment.

  Read the article

• Game Resource Generation

  - by Darthg8r

  I am currently building a game that has a "City" entity. These cities generate and consume resources such as food variably over a period of time. I need to be able query the server often to find exactly how much food the city at any given point. These queries can take place multiple times per minute. There could also be 400,000 cities to track at a given time. How would you handle tracking these resources? Would you do it in real time, keeping an instance of the city in memory on the server, with some sort of a snapshot in time of the resources, then computing the growth/consumption from that snapshot time for subsequent queries? Would you work exclusively with a database, using a similar "snapshoting" scheme? Maybe a mixture of the 2, caching recently queried cities in memory for a period of time? There is also a lot of other data that each city needs to track. A player can queue units to build in a barrack. The armies available in the city will need to be updated as units complete. I'm interested in everyone's input on where/when/how you'd manage the real time data.

  Read the article

• Is your TRY worth catching?

  - by Maria Zakourdaev

    A very useful error handling TRY/CATCH construct is widely used to catch all execution errors  that do not close the database connection. The biggest downside is that in the case of multiple errors the TRY/CATCH mechanism will only catch the last error. An example of this can be seen during a standard restore operation. In this example I attempt to perform a restore from a file that no longer exists. Two errors are being fired: 3201 and 3013: Assuming that we are using the TRY and CATCH construct, the ERROR_MESSAGE() function will catch the last message only: To workaround this problem you can prepare a temporary table that will receive the statement output. Execute the statement inside the xp_cmdshell stored procedure, connect back to the SQL Server using the command line utility sqlcmd and redirect it's output into the previously created temp table.  After receiving the output, you will need to parse it to understand whether the statement has finished successfully or failed. It’s quite easy to accomplish as long as you know which statement was executed. In the case of generic executions you can query the output table and search for words like“Msg%Level%State%” that are usually a part of the error message.Furthermore, you don’t need TRY/CATCH in the above workaround, since the xp_cmdshell procedure always finishes successfully and you can decide whether to fire the RAISERROR statement or not. Yours, Maria

  Read the article

• CodePlex Daily Summary for Monday, September 30, 2013

  CodePlex Daily Summary for Monday, September 30, 2013Popular ReleasesWDTVHubGen - Adds Metadata, thumbnails and subtitles to WDTV Live Hubs: WDTVHubGen.v2.1.5apifix-alpha: WDTVHubGen.v2.1.5apifix-alpha updated to fix the imdb look up problem. working on other problems but wanted this out there for testing.Visual Log Parser: VisualLogParser: Portable Visual Log Parser for Dotnet 4.0Random searcher i pochodne: Generatorek playlisty: Generuje playlisty w formacie .m3u. Na razie beta z bety - ale juz dziala i mozna uzywac.sb0t v.5: sb0t 5.15: Fixed bug in join filter. Fixed bug in pm blocking. Added new Crypto and Entities static classes to scripting. Updated the default node list.Trace Reader for Microsoft Dynamics CRM: Trace Reader (1.2013.9.29): Initial releaseAudioWordsDownloader: AudioWordsDownloader 1.1 build 88: New features -------- list of words (mp3 files) is available upon typing when a download path is defined list of download paths is added paths history settings added Bug fixed ----- case mismatch in word search field fixed path not exist bug fixed when history has been used path, when filled from dialog, not stored refresh autocomplete list after path change word sought is deleted when path is changed at the end sought word list is deleted word list not refreshed download end...HD-Trailers.NET Downloader: HD-Trailer.Net Downloader v 2.1.5: This started out as an effort to improve the search for the corr3ct IMDB page for the movie. I think I have done that here. I have run about 200 movies and the correct movie was identified in all cases including some entries that were problematic in the past. I also swatted several bugs that popped up under special circumstances and resulted in exceptions. This version should be quite a bit better than previous versions. Let me know if there are any issues.Wsus Package Publisher: Release v1.3.1309.28: Fix a bug, where WPP crash when running on a computer where Windows was installed in another language than Fr, En or De, and launching the Update Creation Wizard. Fix a bug, where WPP crash if some Multi-Thread job are launch with more than 64 items. Add a button to abort "Install This Update" wizard. Allow WPP to remember which columns are shown last time. Make URL clickable on the Update Information Tab. Add a new feature, when Double-Clicking on an update, the default action exec...Tweetinvi a friendly Twitter C# API: Alpha 0.8.3.0: Version 0.8.3.0 emphasis on the FIlteredStream and ease how to manage Exceptions that can occur due to the network or any other issue you might encounter. Will be available through nuget the 29/09/2013. FilteredStream Features provided by the Twitter Stream API - Ability to track specific keywords - Ability to track specific users - Ability to track specific locations Additional features - Detect the reasons the tweet has been retrieved from the Filtered API. You have access to both the ma...AcDown?????: AcDown????? v4.5: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ??v4.5 ???? AcPlay????????v3.5 ????????，???????????30% ?? ???????GoodManga.net???? ?? ?????????? ?? ??Acfun?????????? ??Bilibili??????????? ?????????flvcd???????? ??SfAcg????????????? ???????????? ???????????????? ????32...CtrlAltStudio Viewer: CtrlAltStudio Viewer 1.0.0.34288 Release: This release of the CtrlAltStudio Viewer includes the following significant features: Stereoscopic 3D display support. Based on Firestorm viewer 4.4.2 codebase. For more details, see the release notes linked to below. Release notes: http://ctrlaltstudio.com/viewer/release-notes/1-0-0-34288-release Support info: http://ctrlaltstudio.com/viewer/support Privacy policy: http://ctrlaltstudio.com/viewer/privacy Disclaimer: This software is not provided or supported by Linden Lab, the makers of ...C# Intellisense for Notepad++: Release v1.0.6.0: Added support for classless scripts To avoid the DLLs getting locked by OS use MSI file for the installation.SimpleExcelReportMaker: Serm 0.02: SourceCode and SampleMagick.NET: Magick.NET 6.8.7.001: Magick.NET linked with ImageMagick 6.8.7.0. Breaking changes: - ToBitmap method of MagickImage returns a png instead of a bmp. - Changed the value for full transparency from 255(Q8)/65535(Q16) to 0. - MagickColor now uses floats instead of Byte/UInt16.Media Companion: Media Companion MC3.578b: With the feedback received over the renaming of Movie Folders, and files, there has been some refinement done. As well as I would like to introduce Blu-Ray movie folder support, for Pre-Frodo and Frodo onwards versions of XBMC. To start with, Context menu option for renaming movies, now has three sub options: Movie & Folder, Movie only & Folder only. The option Manual Movie Rename needs to be selected from Movie Preferences, but the autoscrape boxes do not need to be selected. Blu Ray Fo...FFXIV Crafting Simulator: Crafting Simulator 2.3: - Major refactoring of the code behind. - Added a current durability and a current CP textbox.DNN CMS Platform: 07.01.02: Major HighlightsAdded the ability to manage the Vanity URL prefix Added the ability to filter members in the member directory by role Fixed issue where the user could inadvertently click the login button multiple times Fixed issues where core classes could not be used in out of process cache provider Fixed issue where profile visibility submenu was not displayed correctly Fixed issue where the member directory was broken when Convert URL to lowercase setting was enabled Fixed issu...Rawr: Rawr 5.4.1: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Sample MVC4 EF Codefirst Architecture: RazMVCWebApp ver 1.1: Signal R sample is added.CODE Framework: 4.0.30923.0: See change notes in the documentation section for details on what's new. Note: If you download the class reference help file with, you have to right-click the file, pick "Properties", and then unblock the file, as many browsers flag the file as blocked during download (for security reasons) and thus hides all content.New ProjectsBeerStats: Beeeeeeer!CodeSet: ttfishteam: Connecting people by their music interestsGassFlow: This is a Computational Method for Genome Annotation based on Species Similarity.GasTeam: connecting peopleHermess Branch: testhermesbranchHyperPage: HyperPage is a HTML\PHP\CSS programming studio. Written in VB12 features folders, files, intellisense, file searching and color selector.JPEG Auto-rotate: A shell extension that automatically rotates JPEG images based on the orientation stored in their EXIF tag (pictures taken with modern smartphones/cameras).Lu?n van t?t nghi?p K09: Phân tích thái d? c?m xúc ngu?i dùng m?ng xã h?iMixDoS: MixDoS is an application who helps you control your computer and helps you collect all your batch applications! This application is easier to use than X3ME!NeoLua: A Lua implementation for the Dynamic Language Runtime (DLR).SharePoint Helpers: A cross product JavaScript and .NET library to simplify SharePoint (2007, 2010, 2013, Office 365) development and make migration easier.Snake Board Game: Childhood is always a happy time, Classical game will never left out from our Memories here is my first game that i have created when i was studying....spmisframework: SpmisFrameworkTFSTest: Just for testTrace Reader for Microsoft Dynamics CRM: Trace reader for Microsoft Dynamics CRM helps you reading the trace files generated by Microsoft Dynamics CRM (4.0, 2011 and 2013) on a graphical interfaceTuple Edit: Editor/IDE for multiple languages.ultvast: utlimus for vastUser Cloner for Dynamics CRM 2011: User Cloner for Dynamics CRM 2011 User Cloner for Dynamics CRM 2011 is utility for all CRM administrators, consultant who have to deal with user issues on CRM WHKY: testWhoIs.dart: Tool to query Whois servers, implemented in Dart.winchrome: Provides different types of window chrome for NavigationWindowsYLH_CRM_Project: This is used to reconstruct ylh of crm

  Read the article

• Which approach would lead to an API that is easier to use?

  - by Clem

  I'm writing a JavaScript API and for a particular case, I'm wondering which approach is the sexiest. Let's take an example: writing a VideoPlayer, I add a getCurrentTime method which gives the elapsed time since the start. The first approach simply declares getCurrentTime as follows: getCurrentTime():number where number is the native number type. This approach includes a CURRENT_TIME_CHANGED event so that API users can add callbacks to be aware of time changes. Listening to this event would look like the following: myVideoPlayer.addEventListener(CURRENT_TIME_CHANGED, function(evt){ console.log ("current time = "+evt.getDispatcher().getCurrentTime()); }); The second approach declares getCurrentTime differently: getCurrentTime():CustomNumber where CustomNumber is a custom number object, not the native one. This custom object dispatches a VALUE_CHANGED event when its value changes, so there is no need for the CURRENT_TIME_CHANGED event! Just listen to the returned object for value changes! Listening to this event would look like the following: myVideoPlayer.getCurrentTime().addEventListener(VALUE_CHANGED, function(evt){ console.log ("current time = "+evt.getDispatcher().valueOf()); }); Note that CustomNumber has a valueOf method which returns a native number that lets the returned CustomNumber object being used as a number, so: var result = myVideoPlayer.getCurrentTime()+5; will work! So in the first approach, we listen to an object for a change in its property's value. In the second one we directly listen to the property for a change on its value. There are multiple pros and cons for each approach, I just want to know which one the developers would prefer to use!

  Read the article

• Tips and tricks to make NX server more stable

  - by gareth_bowles

  My shop has been using the FreeNX server on Fedora 11 for a while now and mostly getting good results, especially with performance, but we have some annoying problems with client connections. There are two main issues: Client sessions sometimes freeze after a long time (seems to be at least 2 hours of having the session active) We often have to make multiple attempts to start a new client session, especially if a previous session was suspended rather than terminated. In qwuite a few cases, we've had to restart the NX server to get around this. Our NX server configuration is the default except that we've enabled logging level 7 to /var/log/nxserver.log, and set the font server to "unix:/7100" so that it uses xfs. Does anyone have any ideas for making things more stable ?

  Read the article

• How to stop a Linux LVM volume group?

  - by thkala

  I am currently dealing with a multiple disk failure on a Linux LVM Volume Group that is backed up by a RAID-5 md device. One disk has been taken out completely and another one is showing a limited number of corrupt sectors, due to what seems to have been a misbehaving power supply. The problem is that once an I/O error hits, md takes the array down, since it does not have enough devices for it to be operational. Where md the only one involved, I could mdadm --stop the array and then recreate it to get all devices active again. Unfortunately, the array is a PV in an LVM volume group and I cannot seem to get the kernel to release it. vgchange -an does not seem to do anything, bar spew out a couple of I/O errors. I am obviously missing something, but how in the name of -insert-favorite-deity- do I get LVM to release the underlying PV without rebooting the server?

  Read the article

• need help writing puppet module for sssd.conf using Hiera

  - by mr.zog

  I need to build a module to manage /etc/sssd/sssd.conf on our Red Hat VMs. The sssd modules published on the forge don't seem to do what I want, nor do I feel like forking any of them. I want to keep all the configuration data in Hiera's common.yaml file. Below is my sssd.conf file. [sssd] config_file_version = 2 services = nss, pam domains = default [nss] filter_groups = root filter_users = root reconnection_retries = 3 entry_cache_timeout = 300 entry_cache_nowait_percentage = 75 [pam] [domain/default] auth_provider = ldap ldap_id_use_start_tls = True chpass_provider = ldap cache_credentials = True ldap_search_base = dc=ederp,dc=com id_provider = ldap ldap_uri = ldaps://lvldap1.lvs01.ederp.com/ ldaps://lvldap2.lvs01.ederp.com/ ldap_tls_cacertdir = /etc/openldap/cacerts What is the best, most economical way to build the sssd.conf file? Should I have multiple .pp files such as domain.pp, pam.pp etc. or should all the lines of configuration land in init.pp?

  Read the article

• Download acceleration with jigdo?

  - by james

  Im using jigdo-lite to download a Debian DVD ISO. I already have the CD version of the image, so I added the CD files to the task. Now I need to download many files (not all) of the DVD ISO. The default jigdo-lite uses wget to download files. It seems jigdo (wget) downloads only one file at a time with one connection. So I'm getting a low download speed. How can I accelerate the download speed using jigdo? Possible Solutions: Using different download manager with jigdo. Is it possible? If yes, How? Using jigdo (wget) to download multiple files at once. How? Getting download links of remaining files to download so that they can be downloaded with a download manager and later added to jigdo iso. How?

  Read the article

• shared web hosting architecture in a university setting

  - by gaspol

  We're in the process of creating a shared webhosting infrastructure for our university. Departments within the university can host their sites on this infrastructure. We're thinking of setting up multiple, load balanced web servers attached to shared storage (for web content and Apache config files). There will also be database servers behind these web servers. Does anyone have any other suggestions about this? Any recommendations for an alternative setup? Would having cPanel/WHM/Plesk be a good idea to automate account creation/maintenance?

  Read the article

• Why use FQDN as DNS-server option in DHCP?

  - by Filip Haglund

  I've seen multiple default configurations of DHCP-servers with a FQDN set as the DNS-server option. Doesn't this imply a catch-22, or the need for that DNS-server to be in the hosts file of every single client? example from dhcp3-server in debian 6: option domain-name-servers ns1.internal.example.org; I can see how using a dns name is convenient because it's only an A-record to change, and they can be load balanced if wanted, but I don't see how the client is going to resolve the name. Why are people using FQDN's as DNS-server addresses in DHCP?

  Read the article

• How should I safely send bulk mail? [closed]

  - by Jerry Dodge

  First of all, we have a large software system we've developed and have a number of clients using it in their own environment. Each of them is responsible for using their own equipment and resources, we don't provide any services to share with them. We have introduced an automated email system which sends emails automatically via SMTP. Usually, it only sends around 10-20 emails a day, but it's very possible to send bulk email up to thousands of people in a single day. This of course requires a big haul of work, which isn't necessarily the problem. The issue arises when it comes to the SMTP server we're using. An email server is issued a number of relays a day, which is paid for. This isn't really necessarily the issue either. The risk is getting the email server blacklisted. It's inevitable, and we need to carefully take all this into consideration. As far as I can see, the ideal setup would be to have at least 50 IP addresses on multiple servers, each of which hosts its own SMTP server. When sending bulk email, it will divide them up across these servers, and each one will process its own queue. If one of those IP's gets blacklisted, it will be decommissioned and a new IP will replace it. Is there a better way that doesn't require us to invest in a large handful of servers? Perhaps a third party service which is meant exactly for this?

  Read the article

• Web-based (intranet / non-hosted) timesheet / project tracking tools

  - by warren

  I realize some similar questions have been asked along these lines before, but from reading-through them today, it appears they don't match my use case. I am looking for a web-based, non-hosted time and project tracking tool. I've downloaded Collabtive so far, but am looking for other suggestions, too. My list of requirements: runs on standard LAMP stack non-hosted (ie, there is an option to download and run it on a local server) not a desktop/single-user application easy-to-use - my audience is a mix of technical and non-technical folks easy to maintain - when time for upgrading comes, I'd really like to not have to rebuild the app (a la ./configure ; make ; make install) needs to support multiple users free-form project additions: we don't have a central project management authority (users should be able to add whatever they're working on, not merely from a drop-down) Does anyone here have experience with such tools? It doesn't have to be free.. but free is always nice :)

  Read the article

• Slow boot on Ubuntu 12.04, probable cause the network connection

  - by Ravi S Ghosh

  I have been having rather slow boot on Ubuntu 12.04. Lately, I tried to figure out the reason and it seems to be the network connection which does not get connected and requires multiple attempts. Here is part of dmesg [ 2.174349] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 2.174352] EXT4-fs (sda2): write access will be enabled during recovery [ 2.308172] firewire_core: created device fw0: GUID 384fc00005198d58, S400 [ 2.333457] usb 7-1.2: new low-speed USB device number 3 using uhci_hcd [ 2.465896] EXT4-fs (sda2): recovery complete [ 2.466406] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.589440] usb 7-1.3: new low-speed USB device number 4 using uhci_hcd **[ 18.292029] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 18.458958] udevd[377]: starting version 175 [ 18.639482] Adding 4200960k swap on /dev/sda5. Priority:-1 extents:1 across:4200960k [ 19.314127] wmi: Mapper loaded [ 19.426602] r592 0000:09:01.2: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.426739] r592: driver successfully loaded [ 19.460105] input: Dell WMI hotkeys as /devices/virtual/input/input5 [ 19.493629] lp: driver loaded but no devices found [ 19.497012] cfg80211: Calling CRDA to update world regulatory domain [ 19.535523] ACPI Warning: _BQC returned an invalid level (20110623/video-480) [ 19.539457] acpi device:03: registered as cooling_device2 [ 19.539520] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input6 [ 19.539568] ACPI: Video Device [M86] (multi-head: yes rom: no post: no) [ 19.578060] Linux video capture interface: v2.00 [ 19.667708] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 19.763171] r852 0000:09:01.3: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 19.763258] r852: driver loaded successfully [ 19.854769] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.0/input/input7 [ 19.854864] generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input0 [ 19.878605] input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.2/7-1.2:1.1/input/input8 [ 19.878698] generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:1d.1-1.2/input1 [ 19.902779] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1.3/7-1.3:1.0/input/input9 [ 19.925034] generic-usb 0003:046D:C063.0003: input,hidraw2: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1d.1-1.3/input0 [ 19.925057] usbcore: registered new interface driver usbhid [ 19.925059] usbhid: USB HID core driver [ 19.942362] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0c45:63ea) [ 19.947004] input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input10 [ 19.947075] usbcore: registered new interface driver uvcvideo [ 19.947077] USB Video Class driver (1.1.1) [ 20.145232] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 20.145235] Copyright(c) 2003-2011 Intel Corporation [ 20.145327] iwlwifi 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 20.145357] iwlwifi 0000:04:00.0: setting latency timer to 64 [ 20.145402] iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000 [ 20.145404] iwlwifi 0000:04:00.0: pci_resource_base = ffffc90000674000 [ 20.145407] iwlwifi 0000:04:00.0: HW Revision ID = 0x0 [ 20.145531] iwlwifi 0000:04:00.0: irq 46 for MSI/MSI-X [ 20.145613] iwlwifi 0000:04:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54 [ 20.145720] iwlwifi 0000:04:00.0: L1 Enabled; Disabling L0S [ 20.167535] iwlwifi 0000:04:00.0: device EEPROM VER=0x11f, CALIB=0x4 [ 20.167538] iwlwifi 0000:04:00.0: Device SKU: 0Xf0 [ 20.167567] iwlwifi 0000:04:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 20.172779] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 20.172783] Disabling lock debugging due to kernel taint [ 20.250115] [fglrx] Maximum main memory to use for locked dma buffers: 3759 MBytes. [ 20.250567] [fglrx] vendor: 1002 device: 9553 count: 1 [ 20.251256] [fglrx] ioport: bar 1, base 0x2000, size: 0x100 [ 20.251271] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 20.251277] pci 0000:01:00.0: setting latency timer to 64 [ 20.251559] [fglrx] Kernel PAT support is enabled [ 20.251578] [fglrx] module loaded - fglrx 8.96.4 [Mar 12 2012] with 1 minors [ 20.310385] iwlwifi 0000:04:00.0: loaded firmware version 8.83.5.1 build 33692 [ 20.310598] Registered led device: phy0-led [ 20.310628] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.372306] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 20.411015] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04733/0xa40000/0xa0000 [ 20.454232] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input11 [ 20.545636] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain [ 20.545640] cfg80211: World regulatory domain updated: [ 20.545642] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 20.545644] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545647] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545649] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 20.545652] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.545654] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 20.609484] type=1400 audit(1340502633.160:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=693 comm="apparmor_parser" [ 20.609494] type=1400 audit(1340502633.160:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=642 comm="apparmor_parser" [ 20.609843] type=1400 audit(1340502633.160:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=693 comm="apparmor_parser" [ 20.609852] type=1400 audit(1340502633.160:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=642 comm="apparmor_parser" [ 20.610047] type=1400 audit(1340502633.160:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=693 comm="apparmor_parser" [ 20.610060] type=1400 audit(1340502633.160:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=642 comm="apparmor_parser" [ 20.610476] type=1400 audit(1340502633.160:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=814 comm="apparmor_parser" [ 20.610829] type=1400 audit(1340502633.160:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=814 comm="apparmor_parser" [ 20.611035] type=1400 audit(1340502633.160:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=814 comm="apparmor_parser" [ 20.661912] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 20.661982] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 20.662013] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 20.770289] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.770689] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 20.770786] snd_hda_intel 0000:01:00.1: irq 48 for MSI/MSI-X [ 20.770815] snd_hda_intel 0000:01:00.1: setting latency timer to 64 [ 20.994040] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 20.994189] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13 [ 21.554799] vesafb: mode is 1024x768x32, linelength=4096, pages=0 [ 21.554802] vesafb: scrolling: redraw [ 21.554804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 21.557342] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011800000, using 3072k, total 3072k [ 21.557498] Console: switching to colour frame buffer device 128x48 [ 21.557516] fb0: VESA VGA frame buffer device [ 21.987338] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 22.184693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 27.362440] iwlwifi 0000:04:00.0: RF_KILL bit toggled to disable radio. [ 27.436988] init: failsafe main process (986) killed by TERM signal [ 27.970112] ppdev: user-space parallel port driver [ 28.198917] Bluetooth: Core ver 2.16 [ 28.198935] NET: Registered protocol family 31 [ 28.198937] Bluetooth: HCI device and connection manager initialized [ 28.198940] Bluetooth: HCI socket layer initialized [ 28.198941] Bluetooth: L2CAP socket layer initialized [ 28.198947] Bluetooth: SCO socket layer initialized [ 28.226135] Bluetooth: RFCOMM TTY layer initialized [ 28.226141] Bluetooth: RFCOMM socket layer initialized [ 28.226143] Bluetooth: RFCOMM ver 1.11 [ 28.445620] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.445623] Bluetooth: BNEP filters: protocol multicast [ 28.524578] type=1400 audit(1340502641.076:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1052 comm="apparmor_parser" [ 28.525018] type=1400 audit(1340502641.076:12): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1052 comm="apparmor_parser" [ 28.629957] type=1400 audit(1340502641.180:13): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1105 comm="apparmor_parser" [ 28.630325] type=1400 audit(1340502641.180:14): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1105 comm="apparmor_parser" [ 28.630535] type=1400 audit(1340502641.180:15): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1105 comm="apparmor_parser" [ 28.645266] type=1400 audit(1340502641.196:16): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1104 comm="apparmor_parser" **[ 28.751922] ADDRCONF(NETDEV_UP): wlan0: link is not ready** [ 28.753653] tg3 0000:08:00.0: irq 49 for MSI/MSI-X **[ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 28.857034] ADDRCONF(NETDEV_UP): eth0: link is not ready** [ 28.871080] type=1400 audit(1340502641.420:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1108 comm="apparmor_parser" [ 28.871519] type=1400 audit(1340502641.420:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=1108 comm="apparmor_parser" [ 28.874905] type=1400 audit(1340502641.424:19): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1113 comm="apparmor_parser" [ 28.875354] type=1400 audit(1340502641.424:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1113 comm="apparmor_parser" [ 30.477976] tg3 0000:08:00.0: eth0: Link is up at 100 Mbps, full duplex [ 30.477979] tg3 0000:08:00.0: eth0: Flow control is on for TX and on for RX **[ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready** [ 31.110269] fglrx_pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 31.110859] [fglrx] Firegl kernel thread PID: 1327 [ 31.111021] [fglrx] Firegl kernel thread PID: 1329 [ 31.111408] [fglrx] Firegl kernel thread PID: 1330 [ 31.111543] [fglrx] IRQ 50 Enabled [ 31.712938] [fglrx] Gart USWC size:1224 M. [ 31.712941] [fglrx] Gart cacheable size:486 M. [ 31.712945] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 31.712948] [fglrx] Reserved FB block: Unshared offset:fc2b000, size:3d5000 [ 31.712950] [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 [ 41.312020] eth0: no IPv6 routers present As you can see I get multiple instances of [ 28.856127] ADDRCONF(NETDEV_UP): eth0: link is not ready and then finally it becomes read and I get the message [ 30.478390] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready. I searched askubuntun, ubuntuforum, and the web but couldn't find a solution. Any help would be very much appreciated. Here is the bootchart

  Read the article

• MDX needs a function or macro syntax

  - by Darren Gosbell

  I was having an interesting discussion with a few people about the impact of named sets on performance (the same discussion noted by Chris Webb here: http://cwebbbi.wordpress.com/2011/03/16/referencing-named-sets-in-calculations). And apparently the core of the performance issue comes down to the way named sets are materialized within the SSAS engine. Which lead me to the thought that what we really need is a syntax for declaring a non-materialized set or to take this even further a way of declaring an MDX expression as function or macro so that it can be re-used in multiple places. Because sometimes you do want the set materialised, such as when you use an ordered set for calculating rankings. But a lot of the time we just want to make our MDX modular and want to avoid having to repeat the same code over and over. I did some searches on connect and could not find any similar suggestions so I posted one here: https://connect.microsoft.com/SQLServer/feedback/details/651646/mdx-macro-or-function-syntax Although apparently I did not search quite hard enough as Chris Webb made a similar suggestion some time ago, although he also included a request for true MDX stored procedures (not the .Net style stored procs that we have at the moment): https://connect.microsoft.com/SQLServer/feedback/details/473694/create-parameterised-queries-and-functions-on-the-server Chris also pointed out this post that he did last year http://cwebbbi.wordpress.com/2010/09/13/iccube/ where he pointed out that the icCube product already has this sort of functionality. So if you think either or both of these suggestions is a good idea then I would encourage you to click on the links and vote for them.

  Read the article

• syslog-ng fails to log on lxc host

  - by christian

  we are running CentOS 6 servers with multiple lxc-containers. For system logging we are using syslog-ng. After a while the syslog-ng daemon stops logging messages, but the daemon keeps running. This happens on the host and inside the containers (where another syslog-ng is running) as well. We could not find any patterns for the failure yet but we assume that it has something to do with lxc, because we don't have these problems on other hosts. We have the suspicion that these problems occur when more than on lxc-container is running and that only "new" processes can not log. We are running the following software versions: CentOS-Linux 6.4/6.5 lxc-0.7.5 syslog-ng-3.2.5 Do you have any ideas? Best regards trademesh

  Read the article

• How should I show shared resources during a Shared Resource game in the Galaxy Editor?

  - by Mag Roader

  One of my favorite ways to play the original StarCraft was in a "Team" game. In this game type, multiple players on the same "team" would share control, resources, supply, and even the same starting location. It was like playing as 1 player, only 2 humans were controlling it. It was a lot of fun. I want to do something very similar in StarCraft 2, but I need to create a custom map in the Galaxy Editor to do it. I found the editor can quite easily emulate this behavior. There is a Trigger action "Set Alliance for Player Group" to "...treat each other as Ally With Shared Vision, Control, And Spending." To use this, I create units for only 1 of the players, and then set all players to be allied with each other in this way. All the other players get no units and no resources. This makes it so 1 player is the actual owner of all the units and everyone else is tagging along with full control. This nearly works! The problem is that if I am not the actual owning player, I can't actually see how many minerals/gas/supply the team has. This makes it pretty difficult to build stuff. What would be the best way to display to the other players how many Minerals/Gas/Supply the team has?

  Read the article

• Javascript form validation - what's lacking?

  - by box9

  I've tried out two javascript form validation frameworks - jQuery validation, and jQuery Tools validator - and I've found both of them lacking. jQuery validation lacks the clear separation between the concepts of "validating" and "displaying validation errors", and is highly inflexible when it comes to displaying dynamic error messages. jQuery Tools on the other hand lacks decent remote validation support (to check if a username exists for example). Even though jQuery validation supports remote validation, the built-in method requires the server to respond in a particular format. In both cases, any sort of asynchronous validation is a pain, as is defining rules for dependencies between multiple inputs. I'm thinking of rolling my own framework to address these shortcomings, but first I want to ask... have others experienced similar annoyances with javascript validation? What did you end up doing? What are some common validation requirements you've had which really should be catered for? And are there other, much better frameworks out there which I've missed? I'm looking primarily at jQuery-based frameworks, though well-implemented frameworks built on other libraries can still provide some useful ideas.

  Read the article

• CodePlex Daily Summary for Monday, September 10, 2012

  CodePlex Daily Summary for Monday, September 10, 2012Popular ReleasesJson Services: Json Services 0.3.2: Json Services 0.3.2 released This release includes: JavaScript support Android support Flex SupportServiceMon - Extensible Real-time, Service Monitoring Utility: ServiceMon Release 0.9.0.50: Auto-uploaded from build serverSocial Network Importer for NodeXL: SocialNetImporter(v.1.5): This new version includes: - Fixed the "resource limit" bug caused by Facebook - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuAcDown????? - AcDown Downloader Framework: AcDown????? v4.1: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???,?????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ?...Move Mouse: Move Mouse 2.5.2: FIXED - Minor fixes and improvements.MVC Controls Toolkit: Mvc Controls Toolkit 2.3: Added The new release is compatible with Mvc4 RTM. Support for handling Time Zones in dates. Specifically added helper methods to convert to UTC or local time all DateTimes contained in a model received by a controller, and helper methods to handle date only fileds. This together with a detailed documentation on how TimeZones are handled in all situations by the Asp.net Mvc framework, will contribute to mitigate the nightmare of dates and timezones. Multiple Templates, and more options to...DNN Metro7 style Skin package: Metro7 06.02.00: Maintenance Release Changes on Metro7 06.02.00 Fixed width and height on the jQuery popup for the Editor. Navigation Provider changed to DDR menu Added menu files and scripts Changed skins to Doctype HTML Changed manifest to dnn6 manifest file Changed License to HTML view Fixed issue on Metro7/PinkTitle.ascx with double registering of the Actions Changed source folder structure and start folder, so the project works with the default DNN structure on developing Added VS 20...Mishra Reader: Mishra Reader Beta 4: Additional bug fixes and logging in this release to try to find the reason some users aren't able to see the main window pop up. Also, a few UI tweaks to tighten up the feed item list. This release requires the final version of .NET 4.5. If the ClickOnce installer doesn't work for you, please try the additional setup exe.Xenta Framework - extensible enterprise n-tier application framework: Xenta Framework 1.9.0: Release Notes Imporved framework architecture Improved the framework security More import/export formats and operations New WebPortal application which includes forum, new, blog, catalog, etc. UIs Improved WebAdmin app. Reports, navigation and search Perfomance optimization Improve Xenta.Catalog domain More plugin interfaces and plugin implementations Refactoring Windows Azure support and much more... Package Guide Source Code - package contains the source code Binaries...Json.NET: Json.NET 4.5 Release 9: New feature - Added JsonValueConverter New feature - Set a property's DefaultValueHandling to Ignore when EmitDefaultValue from DataMemberAttribute is false Fix - Fixed DefaultValueHandling.Ignore not igoring default values of non-nullable properties Fix - Fixed DefaultValueHandling.Populate error with non-nullable properties Fix - Fixed error when writing JSON for a JProperty with no value Fix - Fixed error when calling ToList on empty JObjects and JArrays Fix - Fixed losing deci...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.66: Just going to bite the bullet and rip off the band-aid... SEMI-BREAKING CHANGE! Well, it's a BREAKING change to those who already adjusted their projects to use the previous breaking change's ill-conceived renamed DLLs (versions 4.61-4.65). For those who had not adapted and were still stuck in this-doesn't-work-please-fix-me mode, this is more like a fixing change. The previous breaking change just broke too many people, I'm sorry to say. Renaming the DLL from AjaxMin.dll to AjaxMinLibrary.dl...DotNetNuke® Community Edition CMS: 07.00.00 CTP (Not for Production Use): NOTE: New Minimum Requirementshttp://www.dotnetnuke.com/Portals/25/Blog/Files/1/3418/Windows-Live-Writer-1426fd8a58ef_902C-MinimumVersionSupport_2.png Simplified InstallerThe first thing you will notice is that the installer has been updated. Not only have we updated the look and feel, but we also simplified the overall install process. You shouldn’t have to click through a series of screens in order to just get your website running. With the 7.0 installer we have taken an approach that a...BIDS Helper: BIDS Helper 1.6.1: In addition to fixing a number of bugs that beta testers reported, this release includes the following new features for Tabular models in SQL 2012: New Features: Tabular Display Folders Tabular Translations Editor Tabular Sync Descriptions Fixed Issues: Biml issues 32849 fixing bug in Tabular Actions Editor Form where you type in an invalid action name which is a reserved word like CON or which is a duplicate name to another action 32695 - fixing bug in SSAS Sync Descriptions whe...Umbraco CMS: Umbraco 4.9.0: Whats newThe media section has been overhauled to support HTML5 uploads, just drag and drop files in, even multiple files are supported on any HTML5 capable browser. The folder content overview is also much improved allowing you to filter it and perform common actions on your media items. The Rich Text Editor’s “Media” button now uses an embedder based on the open oEmbed standard (if you’re upgrading, enable the media button in the Rich Text Editor datatype settings and set TidyEditorConten...WordMat: WordMat v. 1.02: This version was used for the 2012 exam.menu4web: menu4web 0.4.1 - javascript menu for web sites: This release is for those who believe that global variables are evil. menu4web has been wrapped into m4w singleton object. Added "Vertical Tabs" example which illustrates object notation.Microsoft SQL Server Product Samples: Database: AdventureWorks OData Feed: The AdventureWorks OData service exposes resources based on specific SQL views. The SQL views are a limited subset of the AdventureWorks database that results in several consuming scenarios: CompanySales Documents ManufacturingInstructions ProductCatalog TerritorySalesDrilldown WorkOrderRouting How to install the sample You can consume the AdventureWorks OData feed from http://services.odata.org/AdventureWorksV3/AdventureWorks.svc. You can also consume the AdventureWorks OData fe...Desktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --New Projectsalimujtaba_project: bhssASP.NET Databinding Tutorial: This is a tutorial project on asp.net databinding.asp.net msaccess tutorial: This is a tutorial projectaspnet gridview: This is a tutorial projectaspnet login tutorial: this is a tutorial projectDataglot - A helper library for System.Data.Common: To support more than one database using System.Data.Common you need connection string conversion, light sql reparsing, multi-cast, trace and many more utilitiesDnsMigrate: This is a small powershell script to move a standalone Microsoft Dns Server to another machine. Also you can backup existing dns records with this script.Elements: Elements is an implementation of the Composite Application Guide for WPF. Written in C# using Visual Studio 2012.EQBAZ: EQ Baz pullFujiy Minesweeper: A MSN Messenger Minesweeper clone. You can play Minesweeper with a friend, who finds more bombs winsHobbyLister: The aim of this project is to create a organizetool for Movies, Books, Boardgame etc.hotfighter2: a gameJihanki: jihankimasterpage tutorial: This a tutorial projectMongo Explorer Tool: Mongo Explorer ToolMSMQ Managment Console: MSMQ Management Console is a command line tool that allows to run variety of commands on local and remote queues, with export and import capabilities.NTCPMSG: High performance open source TCP message send and receive component which written by C#.net.PlaySly: Aplicación para Windows 8 estilo Modern UI para usar series.ly. Está orientada al visionado online, críticas y votaciones. En proceso de construcción.RhotCMS: This is my asp.net MVC 4 CMS.SBQP: Trabalho de Conclusão de Curso de Graduação apresentado a Universidade Estácio de SáSimplyMessenger: SimplyMessenger is a light Network Messenger. It use C# and WPF.toki pona - corpus linguistic tools and various experiments: Various mini-linguistics tools targeting toki pona, a very small fake language. Of potential interest to hobby linguists and conlang enthusiasts.Turbo Server: An FTP Server for Android

  Read the article

< Previous Page | 475 476 477 478 479 480 481 482 483 484 485 486  | Next Page >