Search Results

Search found 70459 results on 2819 pages for 'file sync'.

Page 485/2819 | < Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >

• Hosting a javascript api file for third party sites the way sharethis, uservoice, analytics do it.

  - by Dayson

  I'm preparing to launch a service soon which will provide third party websites a widget. The widget requires my javascript file in the website's code. Exactly the same way services like analytics, uservoice, sharethis, getclicky, etc provide you with a javascript snippet to add to your page. Therefore, my javascript file is going to be hotlinked by tons of websites which possibly receive a lot of requests too. I need advice/opinions on the following aspects: What's the right location for hosting this file? Should I use a sub-domain for it? I was thinking of something like http://api.myservice.com/js/foo.js . Remember, once websites start embedding this file, its location CANNOT change under any circumstances. Right now we can afford just one dedicated server. So I have minified my file, enabled gzip and plan to use some good cache control headers through apache. Also, in the near future when the requests pickup, I will use a http proxy like Varnish. Is this a good plan for the near future? Should I be considering a CDN in the future (since we can't afford it now)? If so how do I make sure we're prepared to migrate to it without breaking services. Pros/Cons of moving just this file to a CDN? Also, since its just one javascript file(50kb), any affordable CDN so we could consider it in the beginning itself? Any other word of advice I could use? Anything I shouldn't overlook at this stage which I would regret later? (both in terms of server + javascript ajax limitations) Thanks in advance.

  Read the article

• How to maximize http.sys file upload performance

  - by anelson

  I'm building a tool that transfers very large streaming data sets (possibly on the order of terabytes in a single stream; routinely in the tens of gigabytes) from one server to another. The client portion of the tool will read blocks from the source disk, and send them over the network. The server side will read these blocks off the network and write them to a file on the server disk. Right now I'm trying to decide which transport to use. Options are raw TCP, and HTTP. I really, REALLY want to be able to use HTTP. The HttpListener (or WCF if I want to go that route) make it easy to plug in to the HTTP Server API (http.sys), and I can get things like authentication and SSL for free. The problem right now is performance. I wrote a simple test harness that sends 128K blocks of NULL bytes using the BeginWrite/EndWrite async I/O idiom, with async BeginRead/EndRead on the server side. I've modified this test harness so I can do this with either HTTP PUT operations via HttpWebRequest/HttpListener, or plain old socket writes using TcpClient/TcpListener. To rule out issues with network cards or network pathways, both the client and server are on one machine and communicate over localhost. On my 12-core Windows 2008 R2 test server, the TCP version of this test harness can push bytes at 450MB/s, with minimal CPU usage. On the same box, the HTTP version of the test harness runs between 130MB/s and 200MB/s depending upon how I tweak it. In both cases CPU usage is low, and the vast majority of what CPU usage there is is kernel time, so I'm pretty sure my usage of C# and the .NET runtime is not the bottleneck. The box has two 6-core Xeon X5650 processors, 24GB of single-ranked DDR3 RAM, and is used exclusively by me for my own performance testing. I already know about HTTP client tweaks like ServicePointManager.MaxServicePointIdleTime, ServicePointManager.DefaultConnectionLimit, ServicePointManager.Expect100Continue, and HttpWebRequest.AllowWriteStreamBuffering. Does anyone have any ideas for how I can get HTTP.sys performance beyond 200MB/s? Has anyone seen it perform this well on any environment?

  Read the article

• How to commit into TortoiseSVN using cruise control config file

  - by pratap

  hi all, can any one tell how to commit into tortoisesvn using cruise control config file. I am getting an error "C:***\Documentation\trunk\dotnet\svn" is not executable or it may not exist. here's the config part... <workingDirectory>C:\*****\Documentation\trunk\dotnet\</workingDirectory> <category>Individual Solutions</category> <modificationDelaySeconds>10</modificationDelaySeconds> <sourcecontrol type="svn"> <trunkUrl>******* svn url *********</trunkUrl> <username> unname </username> <password> pwd </password> <autoGetSource>true</autoGetSource> </sourcecontrol> <tasks> <exec> <executable>C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\MSBuild.exe</executable> <buildTimeoutSeconds>1200</buildTimeoutSeconds> <successExitCodes>0</successExitCodes> </exec> <exec> <executable>iisreset</executable> <buildArgs>/stop</buildArgs> </exec> <exec> <executable>c:\Program Files\TortoiseSVN\bin\TortoiseProc.exe /command:commit /path:"C:\*****\Documentation\trunk\dotnet\"</executable> <buildTimeoutSeconds>1200</buildTimeoutSeconds> <successExitCodes>0</successExitCodes> <description>checkin shared content...</description> </exec> <exec> <executable>iisreset</executable> <buildArgs>/start</buildArgs> </exec> </tasks> </project> Thank you all,

  Read the article

• Using target-specific variable in makefile

  - by James Johnston

  I have the following makefile: OUTPUTDIR = build all: v12target v13target v12target: INTDIR = v12 v12target: DoV12.avrcommontargets v13target: INTDIR = v13 v13target: DoV13.avrcommontargets %.avrcommontargets: $(OUTPUTDIR)/%.elf @true $(OUTPUTDIR)/%.elf: $(OUTPUTDIR)/$(INTDIR)/main.o @echo TODO build ELF file from object file: destination $@, source $^ @echo Compiled elf file for $(INTDIR) > $@ $(OUTPUTDIR)/$(INTDIR)/%.o: %.c @echo TODO call GCC to compile C file: destination $@, source $< @echo Compiled object file for $<, revision $(INTDIR) > $@ $(shell rm -rf $(OUTPUTDIR)) $(shell mkdir -p $(OUTPUTDIR)/v12 2> /dev/null) $(shell mkdir -p $(OUTPUTDIR)/v13 2> /dev/null) .SECONDARY: The idea is that there are several different code configurations that need to be compiled from the same source code. The "all" target depends on v12target and v13 target, which set a number of variables for that particular build. It also depends on an "avrcommontargets" pattern, which defines how to actually do the compiling. avrcommontargets then depends on the ELF file, which in turn depends on object files, which are built from the C source code. Each compiled C file results in an object file (*.o). Since each configuration (v12, v13, etc.) results in a different output, the C file needs to be built several times with the output placed in different subdirectories. For example, "build/v12/main.o", "build/v13/main.o", etc. Sample output: TODO call GCC to compile C file: destination build//main.o, source main.c TODO build ELF file from object file: destination build/DoV12.elf, source build//main.o TODO build ELF file from object file: destination build/DoV13.elf, source build//main.o The problem is that the object file isn't going into the correct subdirectory. For example, "build//main.o" instead of "build/v12/main.o". That then prevents the main.o from being correctly rebuilt to generate the v13 version of main.o. I'm guessing the issue is that $(INTDIR) is a target specific variable, and perhaps this can't be used in the pattern targets I defined for %.elf and %.o. The correct output would be: TODO call GCC to compile C file: destination build/v12/main.o, source main.c TODO build ELF file from object file: destination build/DoV12.elf, source build/v12/main.o TODO call GCC to compile C file: destination build/v13/main.o, source main.c TODO build ELF file from object file: destination build/DoV13.elf, source build/v13/main.o What do I need to do to adjust this makefile so that it generates the correct output?

  Read the article

• Trimming the XML file

  - by Sathish

  I have a XML file as shown below <NewDataSet> - <T> <P /> <C>1</C> <M /> </T> - <T> <P /> <C>1</C> <M /> </T> - <T> <P /> <C>1</C> <M /> </T> - <T> <P /> <C>1</C> <M /> </T> - <T> <P /> <C>2</C> <M>44</M> </T> - <T> <P /> <C>2</C> <M>45</M> </T> - <T> <P /> <C>2</C> <M>46</M> </T> </NewDataSet> Question - Basicall i should remove the block <T> <P /> <C>1</C> <M /> </T> that does not have <M> Value

  Read the article

• PNGs alpha transparancy in AS3 - Unknown file-type

  - by WiseDonkey

  Hello there! After whittling down of the options we've encountered a problem with PNG's and ActionScript 3 (AS3). When loading a PNG 8 or PNG 32 with alpha transparancy we're getting the following error reported in Flash:- "Error #2124: Loaded file is an unknown type" Now, we're dealing with some legacy images, and it appears as though this problem isn't universal - some images believed to be 32bit alpha PNG are loading. BUT, some conclusions:- converting one image that was 32 bit alpha (NOT WORKING IN AS3) to PNG 8 index transparency DID work. And converting that same image to PNG 8 alpha DID NOT work. These all worked in AS2 There is no difference between the headers Headers of a Failing Image [0] => HTTP/1.1 200 OK [1] => Date: Tue, 06 Apr 2010 14:17:28 GMT [2] => Server: Apache/2.2.3 (Red Hat) [3] => Last-Modified: Tue, 06 Apr 2010 13:44:05 GMT [4] => ETag: "3700054-11d6-a3983340" [5] => Accept-Ranges: bytes [6] => Content-Length: 4566 [7] => Connection: close [8] => Content-Type: image/png Headers of a Working Image [0] => HTTP/1.1 200 OK [1] => Date: Tue, 06 Apr 2010 14:19:02 GMT [2] => Server: Apache/2.2.3 (Red Hat) [3] => Last-Modified: Fri, 30 Oct 2009 18:38:08 GMT [4] => ETag: "ba8057-65f2-5445c400" [5] => Accept-Ranges: bytes [6] => Content-Length: 26098 [7] => Connection: close [8] => Content-Type: image/png Any thoughts of a direction of further investigation or thoughts on a bewildering problem with little to no documentation; very warmly welcomed. EDIT Now it would appear as though something in the PHP conversion of the images is shafting; I use the following PHP to add alpha layers:- imagealphablending($image_p, false); ImageSaveAlpha($image_p, true); ImageFill($image_p, 0, 0, IMG_COLOR_TRANSPARENT);

  Read the article

• Sening a file from memory (rather than disk) over HTTP using libcurl

  - by cinek1lol

  Hi! I would like to send pictures via a program written in C + +. - OK WinExec("C:\\curl\\curl.exe -H Expect: -F \"fileupload=@C:\\curl\\ok.jpg\" -F \"xml=yes\" -# \"http://www.imageshack.us/index.php\" -o data.txt -A \"Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.1) Gecko/20061204 Firefox/2.0.0.1\" -e \"http://www.imageshack.us\"", NULL); It works, but I would like to send the pictures from pre-loaded carrier to a variable char (you know what I mean? First off, I load the pictures into a variable and then send the variable), cause now I have to specify the path of the picture on a disk. I wanted to write this program in c++ by using the curl library, not through exe. extension. I have also found such a program (which has been modified by me a bit) #include <stdio.h> #include <string.h> #include <iostream> #include <curl/curl.h> #include <curl/types.h> #include <curl/easy.h> int main(int argc, char *argv[]) { CURL *curl; CURLcode res; struct curl_httppost *formpost=NULL; struct curl_httppost *lastptr=NULL; struct curl_slist *headerlist=NULL; static const char buf[] = "Expect:"; curl_global_init(CURL_GLOBAL_ALL); /* Fill in the file upload field */ curl_formadd(&formpost, &lastptr, CURLFORM_COPYNAME, "send", CURLFORM_FILE, "nowy.jpg", CURLFORM_END); curl_formadd(&formpost, &lastptr, CURLFORM_COPYNAME, "nowy.jpg", CURLFORM_COPYCONTENTS, "nowy.jpg", CURLFORM_END); curl_formadd(&formpost, &lastptr, CURLFORM_COPYNAME, "submit", CURLFORM_COPYCONTENTS, "send", CURLFORM_END); curl = curl_easy_init(); headerlist = curl_slist_append(headerlist, buf); if(curl) { curl_easy_setopt(curl, CURLOPT_URL, "http://www.imageshack.us/index.php"); if ( (argc == 2) && (!strcmp(argv[1], "xml=yes")) ) curl_easy_setopt(curl, CURLOPT_HTTPHEADER, headerlist); curl_easy_setopt(curl, CURLOPT_HTTPPOST, formpost); res = curl_easy_perform(curl); curl_easy_cleanup(curl); curl_formfree(formpost); curl_slist_free_all (headerlist); } system("pause"); return 0; }

  Read the article

• How do I format a text file for IIS Mailroot Pickup so that it sends an e-mail with attachments?

  - by Ben McCormack

  How do I need to format a text file so that it can be read by an SMTP service to send an e-mail that has an attachment? We have a server where we are using II6 SMTP to send mail from a Pickup folder. The goal is to drop a properly formatted text file into Mailroot\Pickup and then the file will be automatically processed and sent to the correct SMTP recipient. For simple files, this works correctly. Here's an example of a simple file that works (domain names changed): From:[email protected] To:[email protected] Subject:Hello World! Test Body Of The E-mail When I drop a text file containing the above contents into the Mailroot\Pickup folder, it sends correctly. However, I haven't been able to figure out how to get an attachment to work. I found some material that explained how to encode an SMTP attachment and another tool for simple base64 encoding conversion. Using the information on those pages, I came up with the following text: From:[email protected] To:[email protected] Subject:Hello World! MIME-Version: 1.0 Content-Type: text/plain; boundary="Attached" Content-Disposition: inline; --Attached Content-Transfer-Encoding: base64 Content-Type: text/plain; name="attachment.txt" Content-Disposition: attachment; filenamename="attachment.txt" VGhpcyBpcyBhIHRlc3Qgb2Ygc29tZXRoaW5nIHRvIGVuY29kZS4NCk5ldyBsaW5lDQpOZXcgTGlu ZQ0KIkhlbGxvdyIgISEhDQo9PT09ICcgZnNkZnNkZiAxMjM1NDU2MzQzNA== --Attached-- However, when I place the above text in a file and drop it into Mailroot\Pickup, it doesn't send an attachment correctly. Instead, an e-mail shows up with the following in the body of the e-mail: MIME-Version: 1.0 Content-Type: text/plain; boundary="Attached" Content-Disposition: inline; --Attached Content-Transfer-Encoding: base64 Content-Type: text/plain; name="attachment.txt" Content-Disposition: attachment; filenamename="attachment.txt" VGhpcyBpcyBhIHRlc3Qgb2Ygc29tZXRoaW5nIHRvIGVuY29kZS4NCk5ldyBsaW5lDQpOZXcgTGlu ZQ0KIkhlbGxvdyIgISEhDQo9PT09ICcgZnNkZnNkZiAxMjM1NDU2MzQzNA== --Attached-- I can't figure out what I need to do to format the text file so that the SMTP service correctly sends attachments.

  Read the article

• how to find maximum frequent item sets from large transactional data file

  - by ANIL MANE

  Hi, I have the input file contains large amount of transactions like Transaction ID Items T1 Bread, milk, coffee, juice T2 Juice, milk, coffee T3 Bread, juice T4 Coffee, milk T5 Bread, Milk T6 Coffee, Bread T7 Coffee, Bread, Juice T8 Bread, Milk, Juice T9 Milk, Bread, Coffee, T10 Bread T11 Milk T12 Milk, Coffee, Bread, Juice i want the occurrence of every unique item like Item Name Count Bread 9 Milk 8 Coffee 7 Juice 6 and from that i want an a fp-tree now by traversing this tree i want the maximal frequent itemsets as follows The basic idea of method is to dispose nodes in each “layer” from bottom to up. The concept of “layer” is different to the common concept of layer in a tree. Nodes in a “layer” mean the nodes correspond to the same item and be in a linked list from the “Head Table”. For nodes in a “layer” NBN method will be used to dispose the nodes from left to right along the linked list. To use NBN method, two extra fields will be added to each node in the ordered FP-Tree. The field tag of node N stores the information of whether N is maximal frequent itemset, and the field count’ stores the support count information in the nodes at left. In Figure, the first node to be disposed is “juice: 2”. If the min_sup is equal to or less than 2 then “bread, milk, coffee, juice” is a maximal frequent itemset. Firstly output juice:2 and set the field tag of “coffee:3” as “false” (the field tag of each node is “true” initially ). Next check whether the right four itemsets juice:1 be the subset of juice:2. If the itemset one node “juice:1” corresponding to is the subset of juice:2 set the field tag of the node “false”. In the following process when the field tag of the disposed node is FALSE we can omit the node after the same tagging. If the min_sup is more than 2 then check whether the right four juice:1 is the subset of juice:2. If the itemset one node “juice:1” corresponding to is the subset of juice:2 then set the field count’ of the node with the sum of the former count’ and 2 After all the nodes “juice” disposed ,begin to dispose the node “coffee:3”. Any suggestions or available source code, welcome. thanks in advance

  Read the article

• Adding objects to an NSMutableArray, order seems odd when parsing from an XML file

  - by diatrevolo

  Hello: I am parsing an XML file for two elements: "title" and "noType". Once these are parsed, I am adding them to an object called aMaster, an instance of my own Master class that contains NSString variables. I am then adding these instances to an NSMutableArray on a singleton, in order to call them elsewhere in the program. The problem is that when I call them, they don't seem to be on the same NSMutableArray index... each index contains either the title OR the noType element, when it should be both... can anyone see what I may be doing wrong? Below is the code for the parser. Thanks so much!! #import "XMLParser.h" #import "Values.h" #import "Listing.h" #import "Master.h" @implementation XMLParser @synthesize sharedSingleton, aMaster; - (XMLParser *) initXMLParser { [super init]; sharedSingleton = [Values sharedValues]; aMaster = [[Master init] alloc]; return self; } - (void)parser:(NSXMLParser *)parser didStartElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qualifiedName attributes:(NSDictionary *)attributeDict { aMaster = [[Master alloc] init]; //Extract the attribute here. if ([elementName isEqualToString:@"intro"]) { aMaster.intro = [attributeDict objectForKey:@"enabled"]; } else if ([elementName isEqualToString:@"item"]) { aMaster.item_type = [attributeDict objectForKey:@"type"]; //NSLog(@"Did find item with type %@", [attributeDict objectForKey:@"type"]); //NSLog(@"Reading id value :%@", aMaster.item_type); } else { //NSLog(@"No known elements"); } //NSLog(@"Processing Element: %@", elementName); //HERE } - (void)parser:(NSXMLParser *)parser foundCharacters:(NSString *)string { if(!currentElementValue) currentElementValue = [[NSMutableString alloc] initWithString:string]; else { [currentElementValue appendString:string];//[tempString stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]]; CFStringTrimWhitespace((CFMutableStringRef)currentElementValue); } } - (void)parser:(NSXMLParser *)parser didEndElement:(NSString *)elementName namespaceURI:(NSString *)namespaceURI qualifiedName:(NSString *)qName { if ([elementName isEqualToString:@"item"]) { [sharedSingleton.master addObject:aMaster]; NSLog(@"Added %@ and %@ to the shared singleton", aMaster.title, aMaster.noType); //Only having one at a time added... don't know why [aMaster release]; aMaster = nil; } else if ([elementName isEqualToString:@"title"]) { [aMaster setValue:currentElementValue forKey:@"title"]; } else if ([elementName isEqualToString:@"noType"]) { [aMaster setValue:currentElementValue forKey:@"noType"]; //NSLog(@"%@ should load into the singleton", aMaster.noType); } NSLog(@"delimiter"); NSLog(@"%@ should load into the singleton", aMaster.title); NSLog(@"%@ should load into the singleton", aMaster.noType); [currentElementValue release]; currentElementValue = nil; } - (void) dealloc { [aMaster release]; [currentElementValue release]; [super dealloc]; } @end

  Read the article

• cannot retrieve effect.fx file

  - by numerical25

  I am having issues loading my effect.fx from directx. When I step into my application, my ID3D10Effect *m_pDefaultEffect; pointer remains empty. the address remains at 0x000000 below is my code #pragma once #include "stdafx.h" #include "resource.h" #include "d3d10.h" #include "d3dx10.h" #include "dinput.h" #define MAX_LOADSTRING 100 class RenderEngine { protected: RECT m_screenRect; //direct3d Members ID3D10Device *m_pDevice; // The IDirect3DDevice10 // interface ID3D10Texture2D *m_pBackBuffer; // Pointer to the back buffer ID3D10RenderTargetView *m_pRenderTargetView; // Pointer to render target view IDXGISwapChain *m_pSwapChain; // Pointer to the swap chain RECT m_rcScreenRect; // The dimensions of the screen ID3D10Texture2D *m_pDepthStencilBuffer; ID3D10DepthStencilState *m_pDepthStencilState; ID3D10DepthStencilView *m_pDepthStencilView; //transformation matrixs D3DXMATRIX g_mtxWorld; D3DXMATRIX g_mtxView; D3DXMATRIX g_mtxProj; //Effect members ID3D10Effect *m_pDefaultEffect; ID3D10EffectTechnique *m_pDefaultTechnique; ID3DX10Font *m_pFont; // The font used for rendering text // Sprites used to hold font characters ID3DX10Sprite *m_pFontSprite; ATOM RegisterEngineClass(); void DoFrame(float); bool LoadEffects(); public: static HINSTANCE m_hInst; HWND m_hWnd; int m_nCmdShow; TCHAR m_szTitle[MAX_LOADSTRING]; // The title bar text TCHAR m_szWindowClass[MAX_LOADSTRING]; // the main window class name void DrawTextString(int x, int y, D3DXCOLOR color, const TCHAR *strOutput); //static functions static LRESULT CALLBACK WndProc(HWND hWnd, UINT message, WPARAM wParam, LPARAM lParam); static INT_PTR CALLBACK About(HWND hDlg, UINT message, WPARAM wParam, LPARAM lParam); bool InitWindow(); bool InitDirectX(); bool InitInstance(); int Run(); void ShutDown(); RenderEngine() { m_screenRect.right = 800; m_screenRect.bottom = 600; } }; below is the implementation bool RenderEngine::LoadEffects() { HRESULT hr; ID3D10Blob *pErrors = 0; // Create the default rendering effect hr = D3DX10CreateEffectFromFile(L"effect.fx", NULL, NULL, "fx_4_0", D3D10_SHADER_DEBUG, 0, m_pDevice, NULL, NULL, &m_pDefaultEffect, &pErrors, NULL); if(pErrors)// at this point, m_pDefaultEffect is still empty but pErrors returns data which means there is {//errors return false; //ends here } //m_pDefaultTechnique = m_pDefaultEffect->GetTechniqueByName("DefaultTechnique"); return true; } My directx Device does work. My effect.fx file is in the same folder as my solution files (.cpp and header files)

  Read the article

• How to add some complex structure in multiple places in an XML file

  - by Guillaume

  I have an XML file which has many section like the one below: <Operations> <Action [some attributes ...]> [some complex content ...] </Action> <Action [some attributes ...]> [some complex content ...] </Action> </Operations> I have to add an <Action/> to every <Operations/>. It seems that an XSLT should be a good solution to this problem: <xsl:template match="Operations/Action[last()]"> <xsl:copy> <xsl:apply-templates select="@*|node()"/> </xsl:copy> <Action>[some complex content ...]</Action> </xsl:template> <xsl:template match="@*|node()"> <xsl:copy> <xsl:apply-templates select="@*|node()"/> </xsl:copy> </xsl:template> My problem is that the content of my <Action/> contains some xPath expressions. For example: <Action code="p_histo01"> <customScript languageCode="gel"> <gel:script xmlns:core="jelly:core" xmlns:gel="jelly:com.niku.union.gel.GELTagLibrary" xmlns:soap="jelly:com.niku.union.gel.SOAPTagLibrary" xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sql="jelly:sql" xmlns:x="jelly:xml" xmlns:xog="http://www.niku.com/xog" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <sql:param value="${gel_stepInstanceId}"/> </gel:script> </customScript> </Action> The ${gel_stepInstanceId} is interpreted by my XSLT but I would like it to be copied as-is. Is that possible? How?

  Read the article

• Why does Google Chrome ignore "last_known_google_url" property in "Local State" file?

  - by Peter Sivák

  I want to force my Google Chrome web browser (version 21.0.1180.89, 64-bit) to use non-localized search (thus google in english) through address bar, using the default Google search engine. To achieve that, I have to change value of the property last_known_google_url to https://www.google.com/?hl=en& in Local State file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Local State). In that file, there should be the property: "browser": { "last_known_google_url": but it is not. Even if I add there the property, it has no impact on search - Google Chrome does not use the property and still searches in localized version. Another option is to put the property to Preferences file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Default/Preferences) - which works perfectly when I start Google Chrome and do some search - but just after that, the property (actually the whole Preferences file) is overriden, so "the most important" trailing part ?hl=en& of the property value is removed - and without it, the non-localized search does not work anymore. Why does Google Chrome ignore last_known_google_url property in Local State file?

  Read the article

• Why does Windows XP (during a rename operation) report file already exists when it doesn't?

  - by Hawk

  From the command-line: E:\menu\html\tom\val\.svn\tmp\text-base>ver Microsoft Windows [Version 5.2.3790] E:\menu\html\tom\val\.svn\tmp\text-base>dir Volume in drive E is DATA Volume Serial Number is F047-F44B Directory of E:\menu\html\tom\val\.svn\tmp\text-base 12/23/2010 04:36 PM <DIR> . 12/23/2010 04:36 PM <DIR> .. 12/23/2010 04:01 PM 0 wtf.com3.csv.svn-base 1 File(s) 0 bytes 2 Dir(s) 170,780,262,400 bytes free E:\menu\html\tom\val\.svn\tmp\text-base>rename wtf.com3.csv.svn-base com3.csv.svn-base A duplicate file name exists, or the file cannot be found. E:\menu\html\tom\val\.svn\tmp\text-base>dir Volume in drive E is DATA Volume Serial Number is F047-F44B Directory of E:\menu\html\tom\val\.svn\tmp\text-base 12/23/2010 04:36 PM <DIR> . 12/23/2010 04:36 PM <DIR> .. 12/23/2010 04:01 PM 0 wtf.com3.csv.svn-base 1 File(s) 0 bytes 2 Dir(s) 170,753,064,960 bytes free E:\menu\html\tom\val\.svn\tmp\text-base>` I don't know what to do about this, as there is no other file in this directory. Why does Windows XP report that there is already a file here named com3.csv.svn-base when there is clearly no other file here?

  Read the article

• how to filter data from xml file for displaying only selected as nodes in treeview

  - by michale

  I have an xml file named "books.xml" provided in the link "http://msdn.microsoft.com/en-us/library/windows/desktop/ms762271(v=vs.85).aspx". What my requirement was to disaplay only the <title> from xml information as nodes in tree view. But when i did the following coding its displaying all the values as nodes like "catalog" as rootnode, book as parent node for all then author,title,genre etc as nodes but i want only root node catalogue and title as nodes not even book. Can any body guide me what modification i need to do in the exisitng logic for displaying title as nodes OpenFileDialog dlg = new OpenFileDialog(); dlg.Title = "Open XML document"; dlg.Filter = "XML Files (*.xml)|*.xml"; dlg.FileName = Application.StartupPath + "\\..\\..\\Sample.xml"; if (dlg.ShowDialog() == DialogResult.OK) { try { //Just a good practice -- change the cursor to a //wait cursor while the nodes populate this.Cursor = Cursors.WaitCursor; //First, we'll load the Xml document XmlDocument xDoc = new XmlDocument(); xDoc.Load(dlg.FileName); //Now, clear out the treeview, //and add the first (root) node treeView1.Nodes.Clear(); treeView1.Nodes.Add(new TreeNode(xDoc.DocumentElement.Name)); TreeNode tNode = new TreeNode(); tNode = (TreeNode)treeView1.Nodes[0]; //We make a call to addTreeNode, //where we'll add all of our nodes addTreeNode(xDoc.DocumentElement, tNode); //Expand the treeview to show all nodes treeView1.ExpandAll(); } catch (XmlException xExc) //Exception is thrown is there is an error in the Xml { MessageBox.Show(xExc.Message); } catch (Exception ex) //General exception { MessageBox.Show(ex.Message); } finally { this.Cursor = Cursors.Default; //Change the cursor back } }} //This function is called recursively until all nodes are loaded private void addTreeNode(XmlNode xmlNode, TreeNode treeNode) { XmlNode xNode; TreeNode tNode; XmlNodeList xNodeList; if (xmlNode.HasChildNodes) //The current node has children { xNodeList = xmlNode.ChildNodes; for (int x = 0; x <= xNodeList.Count - 1; x++) //Loop through the child nodes { xNode = xmlNode.ChildNodes[x]; treeNode.Nodes.Add(new TreeNode(xNode.Name)); tNode = treeNode.Nodes[x]; addTreeNode(xNode, tNode); } } else //No children, so add the outer xml (trimming off whitespace) treeNode.Text = xmlNode.OuterXml.Trim(); }

  Read the article

• What is the correct way to move a file?

  - by Joe McDonald

  We had an issue at my work where I cut and pasted some files. Immediately when I did it, a ton of files were lost. I've been working in IT for 10+ years. I know how to cut and paste a file. Well, when it went up to my managers as to why the files were lost, they deemed it to my cut and paste that caused all the problems and asked why in the world someone as knowledgeable as me would ever cut and paste a file, and didn't I know that was totally the wrong way to move a file? The correct way to move a file is to drag the file. When cutting and pasting, it moves that 1+ GB file (on the server) to the clipboard (on my PC), which, obviously, will cause problems. Dragging a file never hits the clipboard. Be honest, I don't believe that for a minute. I believe when I cut and paste text, it goes to the clipboard. I've seen it in the old versions of windows. But when right clicking on 100+ files that equals 1+ GB, I can't believe that all that data is copied immediately out of whatever share I'm on at the server across my wireless on my laptop to my local clipboard to just go back to the server to another share. It seems they would build some logic in the server OS or my local OS (more likely my local OS) that would say when copying files, don't perform the move action until I click paste and if the files are staying local to where they were before, just move them. So, who's right?

  Read the article

• Loading jar file using JCL(JarClassLoader ) : classpath in manifest is ignored ..

  - by Xinus

  I am trying to load jar file using JCL using following code FileInputStream fis = new FileInputStream(new File( "C:\\Users\\sunils\\glassfish-tests\\working\\test.jar") ); JarClassLoader jc = new JarClassLoader( ); jc.add(fis); Class main = jc.loadClass( "highmark.test.Main" ); String[] str={}; main.getMethod("test").invoke(null);//.getDeclaredMethod("main",String[].class).invoke(null,str); fis.close(); But when I try to run this program I get Exception as Exception in thread "main" java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at Main.main(Main.java:21) Caused by: java.lang.RuntimeException: Embedded startup not found, classpath is probably incomplete at org.glassfish.api.embedded.Server.<init>(Server.java:292) at org.glassfish.api.embedded.Server.<init>(Server.java:75) at org.glassfish.api.embedded.Server$Builder.build(Server.java:185) at org.glassfish.api.embedded.Server$Builder.build(Server.java:167) at highmark.test.Main.test(Main.java:33) ... 5 more According to this it is not able to locate class, But when I run the jar file explicitly it runs fine. It seems like JCL is ignoring other classes present in the jar file, MANIFEST.MF file in jar file shows: Manifest-Version: 1.0 Class-Path: . Main-Class: highmark.test.Main It seems to be ignoring Class-Path: . , This jar file runs fine when I run it using Java explicitly, This is just a test, in reality this jar file is coming as a InputStream and it cannot be stored in filesystem, How can I overcome this problem , Is there any workaround ? Thanks for any help . UNDATE: Here is a jar Main class : package highmark.test; import org.glassfish.api.embedded.*; import java.io.*; import org.glassfish.api.deployment.*; import com.sun.enterprise.universal.io.FileUtils; public class Main { public static void main(String[] args) throws IOException, LifecycleException, ClassNotFoundException { test(); } public static void test() throws IOException, LifecycleException, ClassNotFoundException{ Server.Builder builder = new Server.Builder("test"); Server server = builder.build(); server.createPort(8080); ContainerBuilder containerBuilder = server.createConfig(ContainerBuilder.Type.web); server.addContainer(containerBuilder); server.start(); File war=new File("C:\\Users\\sunils\\maventests\\simple-webapp\\target\\simple-webapp.war");//(File) inputStream.readObject(); EmbeddedDeployer deployer = server.getDeployer(); DeployCommandParameters params = new DeployCommandParameters(); params.contextroot = "simple"; deployer.deploy(war, params); } }

  Read the article

• PHP: Displaying Dom object and Creating xml file

  - by pavun_cool

  <?php $books = array(); $books [] = array( 'title' => 'PHP Hacks', 'author' => 'Jack Herrington', 'publisher' => "O'Reilly" ); $books [] = array( 'title' => 'Podcasting Hacks', 'author' => 'Jack Herrington', 'publisher' => "O'Reilly" ); $doc = new DOMDocument(); $doc->formatOutput = true; $r = $doc->createElement( "books" ); $doc->appendChild( $r ); foreach( $books as $book ) { $b = $doc->createElement( "book" ); $author = $doc->createElement( "author" ); $author->appendChild( $doc->createTextNode( $book['author'] ) ); #$author->appendChild( $doc->createTextNode( 'pavunkumar')); $new = $doc->createElement("Developer"); $a=$doc->createTextNode('I am developer ' ); $new->appendChild($a); $b->appendChild( $author ); $b->appendChild($new); $b->appendChild($new); $title = $doc->createElement( "title" ); $title->appendChild( $doc->createTextNode( $book['title'] ) ); $b->appendChild( $title ); $publisher = $doc->createElement( "publisher" ); $publisher->appendChild( $doc->createTextNode( $book['publisher'] ) ); $b->appendChild( $publisher ); $r->appendChild( $b ); } echo $doc->SaveXml() ; ?> When I run this code in command line. I am getting following things <?xml version="1.0"?> <books> <book> <author>Jack Herrington</author> <Developer>I am developer </Developer> <title>PHP Hacks</title> <publisher>O'Reilly</publisher> </book> <book> <author>Jack Herrington</author> <Developer>I am developer </Developer> <title>Podcasting Hacks</title> <publisher>O'Reilly</publisher> </book> </books> When I run the code in web browser it gives me following things Jack Herrington I am developer O'Reilly Jack Herrington I am developer O'Reilly I want to above output to be like command line output. And one more things is that instead of displaying , how could I create a xml file using $doc Dom object.

  Read the article

• how to check if internal storage file has any data

  - by user3720291

  public class Save extends Activity { int levels = 2; int data_block = 1024; //char[] data = new char[] {'0', '0'}; String blankval = "0"; String targetval = "0"; String temp; String tempwrite; String string = "null"; TextView tex1; TextView tex2; @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.save); Intent intent = getIntent(); Bundle b = intent.getExtras(); tex1 = (TextView) findViewById(R.id.textView1); tex2 = (TextView) findViewById(R.id.textView2); if(b!=null) { string =(String) b.get("string"); } loadprev(); save(); } public void save() { if (string.equals("Blank")) blankval = "1"; if (string.equals("Target")) targetval = "1"; temp = blankval + targetval; try { FileOutputStream fos = openFileOutput("data.gds", MODE_PRIVATE); fos.write(temp.getBytes()); fos.close(); } catch (FileNotFoundException e) {e.printStackTrace();} catch (IOException e) {e.printStackTrace();} tex1.setText(blankval); tex2.setText(targetval); } public void loadprev() { String final_data = ""; try { FileInputStream fis = openFileInput("data.gds"); InputStreamReader isr = new InputStreamReader(fis); char[] data = new char[data_block]; int size; while((size = isr.read(data))>0) { String read_data = String.copyValueOf(data, 0, size); final_data += read_data; data = new char[data_block]; } } catch (FileNotFoundException e) {e.printStackTrace();} catch (IOException e) {e.printStackTrace();} char[] tempread = final_data.toCharArray();; blankval = "" + tempread[0]; targetval = "" + tempread[1]; } } After much tinkering i have finally managed to get my save/load function to work, but it does have an error, pretty much i got it to work then i did a fresh reintall deleting data.gds, afterwards the save/load function crashes because the data.gds file has no previous values. can i use a if statment to check if data.gds has any values in it, if so how do i do it and if not, then what could i use instead?

  Read the article

• Execute a jar file using Ant

  - by geetha

  I am trying to create a runnable jar file from java classes using ant. The java classes use external jars. When I execute the build.xml its showing class not found exception while running the java program. Its compiling fine. Part of My source code: <path id="project-libpath"> <fileset dir="${lib.dir}"> <include name="*.jar"/> </fileset> </path> <path id="project-classpath"> <fileset dir="C:/xmldecode/lib"> <include name="*.jar"/> </fileset> </path> <target name="compile" depends="prepare"> <javac srcdir="${src.dir}" destdir="${classes.dir}"> <classpath refid="project-classpath"/> </javac> </target> <target name="jar" depends="compile"> <copy todir="${classes.dir}"> <fileset dir="C:/xmldecode/lib"/> </copy> <pathconvert property="mf.classpath" pathsep=";"> <path refid="project-classpath" /> <flattenmapper /> </pathconvert> <jar destfile="${jar.dir}/${ant.project.name}.jar" basedir="${classes.dir}"> <manifest> <attribute name="Main-Class" value="${main-class}"/> <attribute name="Class-Path" value="${mf.classpath}"/> </manifest> </jar> </target> <target name="run" depends="jar"> <java jar="${jar.dir}/${ant.project.name}.jar" fork="true"> </java>

  Read the article

• python need some help

  - by maxt0r

  hi i have my codes i have to do a module def subjects but i cant figure out how can u help me thanks. class Enrol: def init(self, dir): def readFiles(, dir, files): for file in files: if file == "classes.txt": class_list = readtable(dir+"/"+file) for item in class_list: Enrol.class_info_dict[item[0]] = item[1:] if item[1] in Enrol.classes_dict: Enrol.classes_dict[item[1]].append(item[0]) else: Enrol.classes_dict[item[1]] = [item[0]] elif file == "subjects.txt": subject_list = readtable(dir+"/"+file) for item in subject_list: Enrol.subjects_dict[item[0]] = item[1] elif file == "venues.txt": venue_list = readtable(dir+"/"+file) for item in venue_list: Enrol.venues_dict[item[0]] = item[1:] elif file.endswith('.roll'): roll_list = readlines(dir+"/"+file) file = os.path.splitext(file)[0] Enrol.class_roll_dict[file] = roll_list for item in roll_list: if item in Enrol.enrolled_dict: Enrol.enrolled_dict[item].append(file) else: Enrol.enrolled_dict[item] = [file] try: os.walk(dir, _readFiles, None) except: print "directory not properly been recognise error" def subjects(what should i write here??): for name in suject_list: print name, out put should look like import enrol e = enrol.Enrol("/path/to/data") e.subjects() ['bw101', 'bw110', 'bw232', 'bw290', 'bw660']

  Read the article

• Download a file using cocoa

  - by dododedodonl

  Hi All, I want to download a file to the downloads folder. I searched google for this and found the NSURLDownload class. I've read the page in the dev center and created this code (with some copy and pasting) this code: @implementation Downloader @synthesize downloadResponse; - (void)startDownloadingURL:(NSString*)downloadUrl destenation:(NSString*)destenation { // create the request NSURLRequest *theRequest=[NSURLRequest requestWithURL:[NSURL URLWithString:downloadUrl] cachePolicy:NSURLRequestUseProtocolCachePolicy timeoutInterval:60.0]; // create the connection with the request // and start loading the data NSURLDownload *theDownload=[[NSURLDownload alloc] initWithRequest:theRequest delegate:self]; if (!theDownload) { NSLog(@"Download could not be made..."); } } - (void)download:(NSURLDownload *)download decideDestinationWithSuggestedFilename:(NSString *)filename { NSString *destinationFilename; NSString *homeDirectory=NSHomeDirectory(); destinationFilename=[[homeDirectory stringByAppendingPathComponent:@"Desktop"] stringByAppendingPathComponent:filename]; [download setDestination:destinationFilename allowOverwrite:NO]; } - (void)download:(NSURLDownload *)download didFailWithError:(NSError *)error { // release the connection [download release]; // inform the user NSLog(@"Download failed! Error - %@ %@", [error localizedDescription], [[error userInfo] objectForKey:NSErrorFailingURLStringKey]); } - (void)downloadDidFinish:(NSURLDownload *)download { // release the connection [download release]; // do something with the data NSLog(@"downloadDidFinish"); } - (void)setDownloadResponse:(NSURLResponse *)aDownloadResponse { [aDownloadResponse retain]; [downloadResponse release]; downloadResponse = aDownloadResponse; } - (void)download:(NSURLDownload *)download didReceiveResponse:(NSURLResponse *)response { // reset the progress, this might be called multiple times bytesReceived = 0; // retain the response to use later [self setDownloadResponse:response]; } - (void)download:(NSURLDownload *)download didReceiveDataOfLength:(unsigned)length { long long expectedLength = [[self downloadResponse] expectedContentLength]; bytesReceived = bytesReceived+length; if (expectedLength != NSURLResponseUnknownLength) { percentComplete = (bytesReceived/(float)expectedLength)*100.0; NSLog(@"Percent - %f",percentComplete); } else { NSLog(@"Bytes received - %d",bytesReceived); } } -(NSURLRequest *)download:(NSURLDownload *)download willSendRequest:(NSURLRequest *)request redirectResponse:(NSURLResponse *)redirectResponse { NSURLRequest *newRequest=request; if (redirectResponse) { newRequest=nil; } return newRequest; } @end But my problem is now, it doesn't appear on the desktop as specified. And I want to put it in downloads and not on the desktop... What do I have to do?

  Read the article

• .Net Custom Components "disappear" after file save

  - by EatATaco

  I might have a hard time explaining this because I am at a total loss for what is happening so I am just looking for some guidance. I might be a bit wordy because I don't know exactly what is the relevant information. I am developing a GUI for a project that I am working on in using .Net (C#) Part of the interface mimics, exactly, what we do in another product. For consistency reasons, my boss wants me to make it look the same way. So I got the other software and basically copied and pasted the components into my new GUI. This required me to introduce a component library (the now defunct Graphics Server GSNet, so I can't go to them for help) so I could implement some simple graphs and temperature/pressure "widgets." The components show up fine, and when I compile, everything seems to work fine. However, at some point during my programming it just breaks. Sometimes the tab that these components are on starts throwing exceptions when I view the designer page (A missing method exception) so it won't display. Sometimes JUST those components from the GSNet library don't show up. Sometimes, if I try to run it, I get a not-instantiated exception on one of their lines of code in the designer code file. Sometimes I can't view the designer at all. No matter what I do I can't reverse it. Even if I undo what I just did it won't fix it. If it happens, I have to revert to a backup and start over again. So I started to backup pretty much every step. I compile it and it works. I comment out a line of code, save it, and then uncomment that same line of code (so I am working with the same exact code) and the components all disappear. It doesn't matter what line of code I actually comment out, as long as it is in the same project that these components are being used. I pretty much have to use the components. . . so does anyone have any suggestion or where I can look to debug this?

  Read the article

• PHP Sockets Errors (connection refused and No such file or directory)

  - by Purefan

  Hello all, I am writing a server app (broadcaster) and a client (relayer). Several relayers can connect to the broadcaster at the same time, send information and the broadcaster will redirect the message to a matching relayer (for example relayer1 sends to broadcaster who sends to relayer43, relayer2 - broadcaster - relayer73...) The server part is working as I have tested it with a telnet client and although its at this point only an echo server it works. Both relayer and broadcaster sit on the same server so I am using AF_UNIX sockets, both files are in different folders though. I have tried two approaches for the relayer and both have failed, the first one is using socket_create: public function __construct() { // where is the socket server? $this->_sHost = 'tcp://127.0.0.1'; $this->_iPort = 11225; // open a client connection $this->_hSocket = socket_create(AF_UNIX, SOCK_STREAM, 0); echo 'Attempting to connect to '.$this->_sHost.' on port '.$this->_iPort .'...'; $result = socket_connect($this->_hSocket, $this->_sHost, $this->_iPort); if ($result === false) { echo "socket_connect() failed.\nReason: ($result) " . socket_strerror(socket_last_error($this->_hSocket)) . "\n"; } else { echo "OK.\n"; } This returns "Warning: socket_connect(): unable to connect [2]: No such file or directory in relayer.class.php on line 27" and (its running from command line) it often also returns a segmentation fault. The second approach is using pfsockopen: public function __construct() { // where is the socket server? $this->_sHost = 'tcp://127.0.0.1'; $this->_iPort = 11225; // open a client connection $fp = pfsockopen ($this->_sHost, $this->_iPort, $errno, $errstr); if (!$fp) { $result = "Error: could not open socket connection"; } else { // get the welcome message fgets ($fp, 1024); // write the user string to the socket fputs ($fp, 'Message ' . __LINE__); // get the result $result .= fgets ($fp, 1024); // close the connection fputs ($fp, "END"); fclose ($fp); // trim the result and remove the starting ? $result = trim($result); $result = substr($result, 2); // now print it to the browser } which only returns the error "Warning: pfsockopen(): unable to connect to tcp://127.0.0.1:11225 (Connection refused) in relayer.class.php on line 33 " In all tests I have tried with different host names, 127.0.0.1, localhost, tcp://127.0.0.1, 192.168.0.199, tcp://192.168.0.199, none of it has worked. Any ideas on this?

  Read the article

• Sharing the same file between different projects

  - by selsine

  Hi Everyone, For version control we currently use Visual Source Safe and are thinking of migrating to another version control system (SVN, Mercurial, Git). Currently we use Visual Source Safe's "Shared" file feature quite heavily. This allows us to share code between design and runtimes of a single product, and between multiple products as well. For example: **Product One** - Design Login.cpp Login.h Helper.cpp Helper.h - Runtime Login.cpp Login.h Helper.cpp Helper.h **Product Two** - Design Login.cpp Login.h - Launcher Login.cpp Login.h - Runtime Login.cpp Login.h In this example Login.cpp and Login.h contain common code that all of our projects need, Helper.cpp and Helper.h is only used in Product One. In Visual Source Safe they are shared between the specific projects, which means that whenever the files are updated in one project they are updated in any project they are shared with. This is a simple example but hopefully it explains why we use the shared feature: to reduce the amount of duplicated code and ensure that when a bug is fixed all projects automatically have access to the new fixed code. After researching alternatives to Visual Source Safe it seems that most version control systems do not have the idea of shared files, instead they seem to use the idea of sub repositories. (http://mercurial.selenic.com/wiki/subrepos http://svnbook.red-bean.com/en/1.0/ch07s03.html) My question (after all of that) is about what the best practices for achieving this are using other version control systems? Should we restructure our projects so that two copies of the files do not exist and an include directory is used instead? e.g. Product One Design Login.cpp Login.h Runtime Login.cpp Login.h Common Helper.cpp Helper.h This still leaves what to do with Login.cpp and Logon.h Should the shared files be moved to their own repository and then compiled into a lib or dll? This would make bug fixing more time consuming as the lib projects would have to be edited and then rebuilt. Should we use externals or sub repositories? Should we combine our projects (i.e. runtime, design, and launcher) into one large project? Any help would be appreciated. We have the feeling that our project design has evolved based on the tools that we used and now that we are thinking of switching tools it's difficult for us to see how we can best modify our practices. Or maybe we are the only people are there doing this...? Also, we use Visual Studio for all of our stuff. Thanks.

  Read the article

< Previous Page | 481 482 483 484 485 486 487 488 489 490 491 492  | Next Page >