Search Results

Search found 12674 results on 507 pages for 'programming competitions'.

Page 487/507 | < Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >

• .Net Custom Components "disappear" after file save

  - by EatATaco

  I might have a hard time explaining this because I am at a total loss for what is happening so I am just looking for some guidance. I might be a bit wordy because I don't know exactly what is the relevant information. I am developing a GUI for a project that I am working on in using .Net (C#) Part of the interface mimics, exactly, what we do in another product. For consistency reasons, my boss wants me to make it look the same way. So I got the other software and basically copied and pasted the components into my new GUI. This required me to introduce a component library (the now defunct Graphics Server GSNet, so I can't go to them for help) so I could implement some simple graphs and temperature/pressure "widgets." The components show up fine, and when I compile, everything seems to work fine. However, at some point during my programming it just breaks. Sometimes the tab that these components are on starts throwing exceptions when I view the designer page (A missing method exception) so it won't display. Sometimes JUST those components from the GSNet library don't show up. Sometimes, if I try to run it, I get a not-instantiated exception on one of their lines of code in the designer code file. Sometimes I can't view the designer at all. No matter what I do I can't reverse it. Even if I undo what I just did it won't fix it. If it happens, I have to revert to a backup and start over again. So I started to backup pretty much every step. I compile it and it works. I comment out a line of code, save it, and then uncomment that same line of code (so I am working with the same exact code) and the components all disappear. It doesn't matter what line of code I actually comment out, as long as it is in the same project that these components are being used. I pretty much have to use the components. . . so does anyone have any suggestion or where I can look to debug this?

  Read the article

• jquery load a specific #Div content from multiple html files

  - by Vikram

  Hello friends I am trying to make a Content Slider for my site. I have multiple HTML files and the structure of these files is like this: <div id="title"><h2>Title of the Slide</h2></div> <div id="image"><a href="http://mylink.com"><img src="image.jpg" width="600" height="300" alt="image"</a></div> <div id="content">Lorem Ipsum is simply dummy text of the printing and typesetting industry. Lorem Ipsum has been the industry's standard dummy text ever since the 1500s.</div> I have been trying to use the following script get content (but no success): <?php function render($position="") { ob_start(); foreach(glob("/slides/*.html") as $fileName) { $fname = basename( $fileName ); $curArr = file($fname); $slides[$fname ]['title'] = $curArr[0]; $slides[$fname ]['image'] = $curArr[1]; $slides[$fname ]['content'] = $curArr[2]; foreach($slides as $key => $value){ ?> <div id="slide-title"> <?php echo $value['title'] ?> </div> <div id="slide-content"> <?php echo $value['image'] ?> </div> <div id="slide-image"> <?php echo $value['content'] ?> </div> <?php }} ?> <?php return ob_get_clean(); } But then I came to know about a jQuery function.... (again no success) jQuery.noConflict(); (function($){ $(document).ready(function () { $('#slide-title').load('slides/slide1.html #title'); $('#slide-content').load('slides/slide1.html #content'); $('#slide-image').load('slides/slide1.html #image'); }); })(jQuery); Now My questions are..... Am I using the right syntax. How do I get the content from multiple files using jQuery. Please Note : My knowledge on Programming is almost '0'. I have just started learning it.

  Read the article

• C++ include statement required if defining a map in a headerfile.

  - by Justin

  I was doing a project for computer course on programming concepts. This project was to be completed in C++ using Object Oriented designs we learned throughout the course. Anyhow, I have two files symboltable.h and symboltable.cpp. I want to use a map as the data structure so I define it in the private section of the header file. I #include <map> in the cpp file before I #include "symboltable.h". I get several errors from the compiler (MS VS 2008 Pro) when I go to debug/run the program the first of which is: Error 1 error C2146: syntax error : missing ';' before identifier 'table' c:\users\jsmith\documents\visual studio 2008\projects\project2\project2\symboltable.h 22 Project2 To fix this I had to #include <map> in the header file, which to me seems strange. Here are the relevant code files: // symboltable.h #include <map> class SymbolTable { public: SymbolTable() {} void insert(string variable, double value); double lookUp(string variable); void init(); // Added as part of the spec given in the conference area. private: map<string, double> table; // Our container for variables and their values. }; and // symboltable.cpp #include <map> #include <string> #include <iostream> using namespace std; #include "symboltable.h" void SymbolTable::insert(string variable, double value) { table[variable] = value; // Creates a new map entry, if variable name already exist it overwrites last value. } double SymbolTable::lookUp(string variable) { if(table.find(variable) == table.end()) // Search for the variable, find() returns a position, if thats the end then we didnt find it. throw exception("Error: Uninitialized variable"); else return table[variable]; } void SymbolTable::init() { table.clear(); // Clears the map, removes all elements. }

  Read the article

• Authlogic Help! Registering a new user when currently logged-in as a user not working.

  - by looloobs

  Hi Just as a disclaimer I am new to rails and programming in general so apologize for misunderstanding something obvious. I have Authlogic with activation up and running. So for my site I would like my users who are logged in to be able to register other users. The new user would pick their login and password through the activation email, but the existing user needs to put them in by email, position and a couple other attributes. I want that to be done by the existing user. The problem I am running into, if I am logged in and then try and create a new user it just tries to update the existing user and doesn't create a new one. I am not sure if there is some way to fix this by having another session start??? If that is even right/possible I wouldn't know how to go about implementing it. I realize without knowing fully about my application it may be difficult to answer this, but does this even sound like the right way to go about this? Am I missing something here? Users Controller: class UsersController < ApplicationController before_filter :require_no_user, :only => [:new, :create] before_filter :require_user, :only => [:show, :edit, :update] def new @user = User.new end def create @user = User.new if @user.signup!(params) @user.deliver_activation_instructions! flash[:notice] = "Your account has been created. Please check your e-mail for your account activation instructions!" redirect_to profile_url else render :action => :new end end def show @user = @current_user end def edit @user = @current_user end def update @user = @current_user # makes our views "cleaner" and more consistent if @user.update_attributes(params[:user]) flash[:notice] = "Account updated!" redirect_to profile_url else render :action => :edit end end end My User_Session Controller: class UserSessionsController < ApplicationController before_filter :require_no_user, :only => [:new, :create] before_filter :require_user, :only => :destroy def new @user_session = UserSession.new end def create @user_session = UserSession.new(params[:user_session]) if @user_session.save flash[:notice] = "Login successful!" if @user_session.user.position == 'Battalion Commander' : redirect_to battalion_path(@user_session.user.battalion_id) else end else render :action => :new end end def destroy current_user_session.destroy flash[:notice] = "Logout successful!" redirect_back_or_default new_user_session_url end end

  Read the article

• PHP readdir(): 3 is not a valid Directory resource

  - by Jordan

  <?php function convert(){ //enable error reporting for debugging error_reporting(E_ALL | E_STRICT); //convert pdf's to html using payroll.sh script and //pdftohtml command line tool $program = "payroll.sh"; $toexec="sh /var/www/html/tmp/" . $program . " 2>&1"; $exec=shell_exec($toexec); //display message from payroll.sh //echo $exec; //echo ('<br/>'); } function process(){ $dir = '/var/www/html/tmp/converted'; //echo ('one'); if (is_dir($dir)) { //echo ('two'); if ($dh = opendir($dir)) { //echo ('three'); while (($file = readdir($dh)) !== false) { //echo ('four'); if ($file != "." && $file != ".."){ echo 'opening file: '; echo $file; echo ("<br/>"); $fp = fopen('/var/www/html/tmp/converted/' . $file, 'r+'); $count = 0; //while file is not at the EOF marker while (!feof($fp)) { $line = fgets($fp); if($count==21) { $employeeID = substr($line,71,4); echo 'employee ID: '; echo $employeeID; echo ('<br/>'); //echo ('six'); $count++; } else if($count==30) { $employeeDate = substr($line,71,10); echo 'employee Date: '; echo $employeeDate; echo ('<br/>'); //echo ('seven'); $count++; } else { //echo ('eight'); //echo ('<br/>'); $count++; } } fclose($fp); closedir($dh); } } } } } convert(); process(); ?> I am setting up a php script that will take a paystub in pdf format, convert it to html, then import it into Drupal after getting the date and employee ID. The code only seems to process the first file in the directory then it gives me this: opening file: dd00000112_28_2010142011-1.html employee ID: 9871 employee Date: 12/31/2010 Warning: readdir(): 3 is not a valid Directory resource in /var/www/html/pay.mistequaygroup.com/payroll.php on line 29 The '3' in the error really confuses me, and google is not helping much. Could it be the 3rd iteration of the loop? The only files in the directory reddir() is scanning are the .html files waiting to be processed. Any ideas? Also, how does my code look? I'm fairly new to doing any real programming and I don't get too much input around work.

  Read the article

• Getting caught in loops - R

  - by user334898

  I am looking at whether or not certain 'systems' for betting really do work as claimed, namely, that they have a positive expectation. One such system is based on the rebate on loss. You basically have a large master pot, say $1 million. Your bankroll for each game is $50k. The way it works, is as follows: 1) Start with $50k, always bet on banker 2) If you win, add the money to the master pot. Then play again with $50k. 3) If you lose(now you're at $30k) play till you either: (a) hit 0, you get a rebate of 10%. Begin playing again with $50k+5k=$55k. (b) If you win more than the initial bankroll, add the money to the master pot. Then play again with $50k. 4) Continue until you double the master pot. I just cant find an easy way of programming out the possible cases in R, since you can eventually go down an improbable path. For example, you start at 50k, lose 20, win 19, now you're at 49, now you lose 20, lose 20, now youre at 9, you either lose 9 and get back 5k or you win and this cycle continues until you either end up with more than 50k or hit 0 and get the rebate on the 50k and start again with $50k +5k. Here's some code i started, but i havent figured out a good way of handling the cases where you get stuck and keeping track of the number of games played. Thanks again for your help. Obviously, I understand you may be busy and not have time. p.loss <- .4462466 p.win <- .4585974 p.tie <- 1 - (p.win+p.loss) prob <- c(p.win,p.tie,p.loss) bet<-20 x <- c(19,0,-20) r <- 10 # rebate = 20% br.i <- 50 br<-200 #for(i in 1:100){ # cbr.i<-0 y <- sample(x,1,replace=T,prob) cbr.i<-y+br.i if(cbr.i > br.i){ br<-br+(cbr.i-br.i); cbr.i<-br.i; }else{ y <- sample(x,2,replace=T,prob); if( sum(y)< cbr.i ){ cbr.i<-br.i+(1/r)*br.i; br<-br-br.i} cbr.i<-y+ }else{ cbr.i<- sum(y) + cbr.i; }if(cbr.i <= bet){ y <- sample(x,1,replace=T,prob) if(abs(y)>cbr.i){ cbr.i<-br.i+(1/r)*br.i } }

  Read the article

• Implementing hoverIntent for Drop Down Menu (coming from click_event)

  - by stormeTrooper

  I've just recently started programming, I was hoping for some help. I have a drop down menu that was originally activated by click_event, however I want to now implement hoverIntent in order to make the menu drop. The issue I am having now is being able to use the menu, because whenever I invoke the menu now, once I leave the area that activates the menu, the menu closes. If you could explain to me like I'm five, I'd appreciate it, thanks :) The code I am using as follows: JavaScript: function setupUserConfigMenu() { $('.user_profile_btn').hoverIntent( function (event) { $('#user_settings_dropdown').animate({height:['toggle', 'swing'] }, 225); }, function (event) { $('#user_settings_dropdown').animate({height:['toggle', 'swing'] }, 225); }) } HTML: <li> <a href="<%= "#" %>" class="user_profile_btn" title="Your profile page"><%= truncate(current_user.full_name || current_user.name, :length => 28) %> <div class="arrow_down"></div></a> <ul id="user_settings_dropdown"> <li> <a href="<%= current_user.get_url(true) %>"> <%= image_tag current_user.get_thumb_url, :size => "30x30" %> <div> <%= truncate(current_user.full_name || current_user.name, :length => 40) %> <br> View profile </div> </a> </li> <div class="grey_line"></div> <li class="settings_list_item"> <%= link_to "Settings", edit_user_registration_path %> </li> <li class="settings_list_item"> <%= link_to "About", "/about" %> </li> <li class="settings_list_item"> <%= link_to "Logout", destroy_user_session_path, :method => :delete %> </li> </ul> </li>

  Read the article

• Making an efficient algorithm

  - by James P.

  Here's my recent submission for the FB programming contest (qualifying round only requires to upload program output so source code doesn't matter). The objective is to find two squares that add up to a given value. I've left it as it is as an example. It does the job but is too slow for my liking. Here's the points that are obviously eating up time: List of squares is being recalculated for each call of getNumOfDoubleSquares(). This could be precalculated or extended when needed. Both squares are being checked for when it is only necessary to check for one (complements). There might be a more efficient way than a double-nested loop to find pairs. Other suggestions? Besides this particular problem, what do you look for when optimizing an algorithm? public static int getNumOfDoubleSquares( Integer target ){ int num = 0; ArrayList<Integer> squares = new ArrayList<Integer>(); ArrayList<Integer> found = new ArrayList<Integer>(); int squareValue = 0; for( int j=0; squareValue<=target; j++ ){ squares.add(j, squareValue); squareValue = (int)Math.pow(j+1,2); } int squareSum = 0; System.out.println( "Target=" + target ); for( int i = 0; i < squares.size(); i++ ){ int square1 = squares.get(i); for( int j = 0; j < squares.size(); j++ ){ int square2 = squares.get(j); squareSum = square1 + square2; if( squareSum == target && !found.contains( square1 ) && !found.contains( square2 ) ){ found.add(square1); found.add(square2); System.out.println( "Found !" + square1 +"+"+ square2 +"="+ squareSum); num++; } } } return num; }

  Read the article

• Device drivers and Windows

  - by b-gen-jack-o-neill

  Hi, I am trying to complete the picture of how the PC and the OS interacts together. And I am at point, where I am little out of guess when it comes to device drivers. Please, don´t write things like its too complicated, or you don´t need to know when using high programming laguage and winapi functions. I want to know, it´s for study purposes. So, the very basic structure of how OS and PC (by PC I mean of course HW) is how I see it is that all other than direct CPU commands, which can CPU do on itself (arithmetic operation, its registers access and memory access) must pass thru OS. Mainly becouse from ring level 3 you cannot use in and out intructions which are used for acesing other HW. I know that there is MMIO,but it must be set by port comunication first. It was not like this all the time. Even I am bit young to remember MSDOS, I know you could access HW directly, becouse there ws no limitation, no ring mode. So you could to write string to diplay use wheather DOS function, or directly acess video card memory and write it by yourself. But as OS developed, there is no longer this possibility. But it is fine, since OS now handles all the HW comunication, and frankly it more convinient and much more safe (I would say the only option) in multitasking environment. So nowdays you instead of using int instructions to use BIOS mapped function or DOS function you call dll which internally than handles everything you don´t need to know about. I understand this. I also undrstand that device drivers is the piece of code that runs in ring level 0, so it can do all the HW interactions. But what I don´t understand is connection between OS and device driver. Let´s take a example - I want to make a sound card make a sound. So I call windows API to acess sound card, but what happens than? Does windows call device drivers to do so? But if it does call device driver, does it mean, that all device drivers which can be called by winAPI function, must have routines named in some specific way? I mean, when I have new sound card, must its drivers have functions named same as the old one? So Windows can actually call the same function from its perspective? But if Windows have predefined sets of functions requored by device drivers, that it cannot use new drivers that doesent existed before last version of OS came out. Please, help me understand this mess. I am really getting mad. Thanks.

  Read the article

• How can I remove rows with unique values? As in only keeping rows with duplicate values?

  - by user1456405

  Here's the conundrum, I'm a complete and utter noob when it comes to programming. I understand the basics, but am still learning javascript. I have a spreadsheet of surveys, in which I need to see how particular users have varied over time. As such, I need to disregard all rows with unique values in a particular column. The data looks like this: Response Date Response_ID Account_ID Q.1 10/20/2011 12:03:43 PM 23655956 1168161 8 10/20/2011 03:52:57 PM 23660161 1168152 0 10/21/2011 10:55:54 AM 23672903 1166121 7 10/23/2011 04:28:16 PM 23694471 1144756 9 10/25/2011 06:30:52 AM 23732674 1167449 7 10/25/2011 07:52:28 AM 23734597 1087618 5 I've found a way to do so in VBA, which sucks as I have to use excel, per below: Sub Del_Unique() Application.ScreenUpdating = False Columns("B:B").Insert Shift:=xlToRight Columns("A:A").Copy Destination:=Columns("B:B") i = Application.CountIf(Range("A:A"), "<>") + 50 If i > 65536 Then i = 65536 Do If Application.CountIf(Range("B:B"), Range("A" & i)) = 1 Then Rows(i).Delete End If i = i - 1 Loop Until i = 0 Columns("B:B").Delete Application.ScreenUpdating = True End Sub But that requires mucking about. I'd really like to do it in Google Spreadsheets with a script that won't have to be changed. Closest I can get is retrieving all duplicate user ids from the range, but can't associate that with the row. That code follows: function findDuplicatesInSelection() { var activeRange = SpreadsheetApp.getActiveRange(); var values = activeRange.getValues(); // values that appear at least once var once = {}; // values that appear at least twice var twice = {}; // values that appear at least twice, stored in a pretty fashion! var final = []; for (var i = 0; i < values.length; i++) { var inner = values[i]; for (var j = 0; j < inner.length; j++) { var cell = inner[j]; if (cell == "") continue; if (once.hasOwnProperty(cell)) { if (!twice.hasOwnProperty(cell)) { final.push(cell); } twice[cell] = 1; } else { once[cell] = 1; } } } if (final.length == 0) { Browser.msgBox("No duplicates found"); } else { Browser.msgBox("Duplicates are: " + final); } } Anyhow, sorry if this is the wrong place or format, but half of what I've found so far has been from stack, I thought it was a good place to start. Thanks!

  Read the article

• Unexpected return value

  - by Nicholas Gibson

  Program stopped compiling at this point: What is causing this error? (Error is at the bottom of post) public class JFrameWithPanel extends JFrame implements ActionListener, ItemListener { int packageIndex; double price; double[] prices = {49.99, 39.99, 34.99, 99.99}; DecimalFormat money = new DecimalFormat("$0.00"); JLabel priceLabel = new JLabel("Total Price: "+price); JButton button = new JButton("Check Price"); JComboBox packageChoice = new JComboBox(); JPanel pane = new JPanel(); TextField text = new TextField(5); JButton accept = new JButton("Accept"); JButton decline = new JButton("Decline"); JCheckBox serviceTerms = new JCheckBox("I Agree to the Terms of Service.", false); JTextArea termsOfService = new JTextArea("This is a text area", 5, 10); public JFrameWithPanel() { super("JFrame with Panel"); setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); pane.add(packageChoice); setContentPane(pane); setSize(250,250); setVisible(true); packageChoice.addItem("A+ Certification"); packageChoice.addItem("Network+ Certification "); packageChoice.addItem("Security+ Certifictation"); packageChoice.addItem("CIT Full Test Package"); pane.add(button); button.addActionListener(this); pane.add(text); text.setEditable(false); text.setBackground(Color.WHITE); text.addActionListener(this); pane.add(termsOfService); termsOfService.setEditable(false); termsOfService.setBackground(Color.lightGray); pane.add(serviceTerms); serviceTerms.addItemListener(this); pane.add(accept); accept.addActionListener(this); pane.add(decline); decline.addActionListener(this); } public void actionPerformed(ActionEvent e) { packageIndex = packageChoice.getSelectedIndex(); price = prices[packageIndex]; text.setText("$"+price); Object source = e.getSource(); if(source == accept) { if(serviceTerms.isSelected() = false) // line 79 { JOptionPane.showMessageDialog(null,"Please accept the terms of service."); } else { JOptionPane.showMessageDialog(null,"Thanks."); } } } Error: \Desktop\Java Programming\JFrameWithPanel.java:79: unexpected type required: variable found : value if(serviceTerms.isSelected() = false) ^ 1 error

  Read the article

• Java Flow Control Problem

  - by Kyle_Solo

  I am programming a simple 2d game engine. I've decided how I'd like the engine to function: it will be composed of objects containing "events" that my main game loop will trigger when appropriate. A little more about the structure: Every GameObject has an updateEvent method. objectList is a list of all the objects that will receive update events. Only objects on this list have their updateEvent method called by the game loop. I’m trying to implement this method in the GameObject class (This specification is what I’d like the method to achieve): /** * This method removes a GameObject from objectList. The GameObject * should immediately stop executing code, that is, absolutely no more * code inside update events will be executed for the removed game object. * If necessary, control should transfer to the game loop. * @param go The GameObject to be removed */ public void remove(GameObject go) So if an object tries to remove itself inside of an update event, control should transfer back to the game engine: public void updateEvent() { //object's update event remove(this); System.out.println("Should never reach here!"); } Here’s what I have so far. It works, but the more I read about using exceptions for flow control the less I like it, so I want to see if there are alternatives. Remove Method public void remove(GameObject go) { //add to removedList //flag as removed //throw an exception if removing self from inside an updateEvent } Game Loop for(GameObject go : objectList) { try { if (!go.removed) { go.updateEvent(); } else { //object is scheduled to be removed, do nothing } } catch(ObjectRemovedException e) { //control has been transferred back to the game loop //no need to do anything here } } // now remove the objects that are in removedList from objectList 2 questions: Am I correct in assuming that the only way to implement the stop-right-away part of the remove method as described above is by throwing a custom exception and catching it in the game loop? (I know, using exceptions for flow control is like goto, which is bad. I just can’t think of another way to do what I want!) For the removal from the list itself, it is possible for one object to remove one that is farther down on the list. Currently I’m checking a removed flag before executing any code, and at the end of each pass removing the objects to avoid concurrent modification. Is there a better, preferably instant/non-polling way to do this?

  Read the article

• How can I obtain the IPv4 address of the client?

  - by Dr Dork

  Hello! I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code setup to listen for incoming TCP connection requests from clients after the parent socket has been created and is set to listen... int sockfd, newfd; unsigned int len; socklen_t sin_size; char msg[]="Test message sent"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char ip[INET6_ADDRSTRLEN]; . . //parent socket creation and listen code omitted for simplicity . //wait for connection requests from clients while(1) { //Returns the socketID and address of client connecting to socket if( ( newfd = accept(sockfd, (struct sockaddr *)&client, &len) ) == -1 ){ perror("Accept"); exit(-1); } if( (rv = recv(newfd, buf, MAXLEN-1, 0 )) == -1) { perror("Recv"); exit(-1); } struct sockaddr_in *clientAddr = ( struct sockaddr_in *) get_in_addr((struct sockaddr *)&client); inet_ntop(client.ss_family, clientAddr, ip, sizeof ip); printf("Receive from %s: query type is %s\n", ip, buf); if( ( st = send(newfd, msg, strlen(msg), 0)) == -1 ) { perror("Send"); exit(-1); } //ntohs is used to avoid big-endian and little endian compatibility issues printf("Send %d byte to port %d\n", ntohs(clientAddr->sin_port) ); close(newfd); } } I found the get_in_addr function online and placed it at the top of my code and use it to obtain the IP address of the client connecting... // get sockaddr, IPv4 or IPv6: void *get_in_addr(struct sockaddr *sa) { if (sa->sa_family == AF_INET) { return &(((struct sockaddr_in*)sa)->sin_addr); } return &(((struct sockaddr_in6*)sa)->sin6_addr); } but the function always returns the IPv6 IP address since thats what the sa_family property is set as. My question is, is the IPv4 IP address stored anywhere in the data I'm using and, if so, how can I access it? Thanks so much in advance for all your help!

  Read the article

• Searching a Better Solution with Delegates

  - by spagetticode

  Hey All, I am a newbie in C# and curious about the better solution of my case. I have a method which gets the DataTable as a parameter and creates a List with MyClass's variables and returns it. public static List<Campaigns> GetCampaignsList(DataTable DataTable) { List<Campaigns> ListCampaigns = new List<Campaigns>(); foreach (DataRow row in DataTable.Rows) { Campaigns Campaign = new Campaigns(); Campaign.CampaignID = Convert.ToInt32(row["CampaignID"]); Campaign.CustomerID = Convert.ToInt32(row["CustomerID"]); Campaign.ClientID = Convert.ToInt32(row["ClientID"]); Campaign.Title = row["Title"].ToString(); Campaign.Subject = row["Subject"].ToString(); Campaign.FromName = row["FromName"].ToString(); Campaign.FromEmail = row["FromEmail"].ToString(); Campaign.ReplyEmail = row["ReplyEmail"].ToString(); Campaign.AddDate = Convert.ToDateTime(row["AddDate"]); Campaign.UniqueRecipients = Convert.ToInt32(row["UniqueRecipients"]); Campaign.ClientReportVisible = Convert.ToBoolean(row["ClientReportVisible"]); Campaign.Status = Convert.ToInt16(row["Status"]); ListCampaigns.Add(Campaign); } return ListCampaigns; } And one of my another DataTable method gets the DataTable from the database with given parameters. Here is the method. public static DataTable GetNewCampaigns() { DataTable dtCampaigns = new DataTable(); Campaigns Campaigns = new Campaigns(); dtCampaigns = Campaigns.SelectStatus(0); return dtCampaigns; } But the problem is that, this GetNewCampaigns method doesnt take parameters but other methods can take parameters. For example when I try to select a campaign with a CampaignID, I have to send CampaignID as parameter. These all Database methods do take return type as DataTable but different number of parameters. public static DataTable GetCampaignDetails(int CampaignID) { DataTable dtCampaigns = new DataTable(); Campaigns Campaigns = new Campaigns(); dtCampaigns = Campaigns.Select(CampaignID); return dtCampaigns; } At the end, I want to pass a Delegate to my first GetCampaignList Method as parameter which will decide which Database method to invoke. I dont want to pass DataTable as parameter as it is newbie programming. Could you pls help me learn some more advance features. I searched over it and got to Func< delegate but could not come up with a solution.

  Read the article

• Windows MAchine Debugging

  - by PrettyFlower

  I've been learning how to program for Windows for some time now and am getting pretty comfy with COM. I had thought to go over to Linux and do some C++ programming there and I wished to run Rosetta Commons so I installed Fedora. I had tried installing Ubuntu a few months ago and things got messy. I had a glitch, maybe caused by one of the live cd creators, my video card or something I don't know. Who Crashed suggested it was my video card and I had regular messages about ntfs.sys and page file issues. At any rate I just installed Fedora and the same thing is happening again. I would like to think with the twenty five years of doing this that I might finally make some headway into debugging my system. I think I may have overlooked a lot of what could be done in favor of simply uninstalling, reinstalling and formatting and starting from scratch. I have opened up the folder windows debugging tools, quite accidentally and just before I was going to clean sweep again, and I found KD and WinDbg. I had never seen these before and I felt that maybe I should look into this. I am quite familiar with the modern machine that is known as the computer, I know what a Kernel is and am now pretty familiar with at the very least Windows Operating System Services. I wish to begin tracking my own machines errors. I understand that most kernel debugging is done on a second machine but I don't have one. And also I understand the goal of the debugger seems to be less about run of the mill errors and more about development time strategies but I'm sure there is more to this. This is my first go at this and I thought maybe I could get some suggestions on where to go from here. I would really like to learn ways to fix my machine and also maybe pick up some tricks on the dev side as well. I hope this isn't too broad a question or too generalized. I'm really just looking for the keywords and an overview of the more routine strategies used. thx

  Read the article

• How do you return a string from a function correctly in Dynamic C?

  - by aquanar

  I have a program I am trying to debug, but Dynamic C apparently treats strings differently than normal C does (well, character arrays, anyway). I have a function that I made to make an 8 character long (well, 10 to include the \0 ) string of 0s and 1s to show me the contents of an 8-bit char variable. (IE, I give it the number 13, it returns the string "0001101\0" ) When I use the code below, it prints out !{happy face] 6 times (well, the second one is the happy face alone for some reason), each return comes back as 0xDEAE or "!\x02. I thought it would dereference it and return the appropriate string, but it appears to just be sending the pointer and attempting to parse it. This may seem silly, but my experience was actually in C++ and Java, so going back to C brings up a few issues that were dealt with in later programming languages that I'm not entirely sure how to deal with (like the lack of string variables). How could I fix this code, or how would be a better way to do what I am trying to do (I thought maybe sending in a pointer to a character array and working on it from the function might work, but I thought I should ask to see if maybe I'm just trying to reinvent the wheel). Currently I have it set up like this: this is an excerpt from the main() display[0] = '\0'; for(i=0;i<6;i++) { sprintf(s, "%s ", *char_to_bits(buffer[i])); strcat(display, s); } DispStr(8,5, display); and this is the offending function: char *char_to_bits(char x) { char bits[16]; strcpy(bits,"00000000\0"); if (x & 0x01) bits[7]='1'; if (x & 0x02) bits[6]='1'; if (x & 0x04) bits[5]='1'; if (x & 0x08) bits[4]='1'; if (x & 0x10) bits[3]='1'; if (x & 0x20) bits[2]='1'; if (x & 0x40) bits[1]='1'; if (x & 0x80) bits[0]='1'; return bits; } and just for the sake of completion, the other function is used to output to the stdio window at a specific location: void DispStr(int x, int y, char *s) { x += 0x20; y += 0x20; printf ("\x1B=%c%c%s", x, y, s); }

  Read the article

• How do I access the enumerated item with an indexer and assign array string to it for display?

  - by g00p3k

  EDITED: Updated 3/23/09. See rest of post at bottom. I'm still having trouble with the indexer. Anymore help or examples would really help me out. Write a class, MyCourses, that contains an enumeration of all the courses that you are currently taking. This enum should be nested inside of your class MyCourses. Your class should also have an array field that provides a short description (as a String) of each of your courses. Write an indexer that takes one of your enumerated courses as an index and returns the String description of the course. Write a class MyFriends that contains an indexer that provides access to the names of your friends. namespace IT274_Unit4Project { public class MyCourses { // enumeration that contains an enumeration of all the courses that // student is currently enrolled in public enum CourseName {IT274= 0,CS210 = 1} // array field that provides short description for each of classes, // returns string description of the course private String[] courseDescription = {"Intermediate C#: Teaches intermediate elements of C# programming and software design", "Career Development Strategies: Teaches principles for career progression, resume preparation, and overall self anaylsis"}; // indexer that takes one of the enumerated courses as an index // and returns the String description of the course public String this[CourseName index] { get { if (index == 1) return courseDescription[0]; else return courseDescription[1]; } set { if (index == 1) courseDescription[0] = value; else courseDescription[1] = value; } } } }//end public class MyCourses I'm working on this homework project and having trouble understanding the text explaining how to correctly take the accessed value of the enumeration and then apply the string array value to it. Can you please help me understand this? The text we are using is very difficult and poorly written for a beginner to understand, so I'm kind of on my own here. I've got the first parts written, but need some help on the accessing of the enumeration value and assigning, i think i'm close, but don't understand how to properly get and set the values on this. Please do not provide me with direct code answers, unless a MSDN style explanation that is generalized and not specific to my project. ie: public class MyClass { string field1; string field2; //properties public string Value1 get etc... Thanks!

  Read the article

• Advice needed: stay with Java team or move to C++ team?

  - by user68759

  Some background - I have been programming in Java as a professional for the last few years. This is mainly using Java SE. I have also touched bits and pieces of other various Java technologies and have some basic knowledge about them. I consider my self as an intermediate Java programmer. I like Java very much. I think it is only going to get bigger. Recently, my manager asked my opinion on whether I would like to be transferred to another team within the company that is developing a product in C++. This is mainly because my current Java team simply didn't make enough money due to poor sales and the economic downturn. Now, I have never had any experience with C++ nor have I ever coded a single line of code in C++. I have always wanted to learn it and now is my chance. But I really want to make sure I get benefit out of it in the future, in the sense that I will have the skills that will still be on-demand in the future. So, what do you experts think? Is C++ still the language to learn these days to secure yourself for the future? What will I learn more in C++ but not in Java? And are they worthy to learn considering the current and possible future demands in IT industry? (Apart from the obvious more control over memory management and something along that line.) What is a good excuse to refuse the offer in order to stay with the Java team? I don't want to blatantly refuse it because you can never predict the future and I could possibly come back to my manager in the future and ask him to transfer me to the C++ team. How do I say it nicely that I am taking the offer but I would like to still be involved with Java one way or another, such as when there is a new Java project I would like to be considered. I have to admit that I am kind of 50-50 at the moment. I want to learn C++ for the sake of improving my skills and also helping my company to reduce the fund required for the Java team. But it is also hard for me to leave Java because I know Java is going to get bigger, so I am afraid of getting behind when I start concentrating on C++. I could, of course, decide to just join the C++ team, and then spend my free time reading about Java to keep in touch with it, but I thought I would ask anyway in case some people can point out the strong points of either over the other given the current and possibly future circumstances.

  Read the article

• What's the fastest lookup algorithm for a key, pair data structure (i.e, a map)?

  - by truncheon

  In the following example a std::map structure is filled with 26 values from A - Z (for key) and 0 – 26 for value. The time taken (on my system) to lookup the last entry (10000000 times) is roughly 250 ms for the vector, and 125 ms for the map. (I compiled using release mode, with O3 option turned on for g++ 4.4) But if for some odd reason I wanted better performance than the std::map, what data structures and functions would I need to consider using? I apologize if the answer seems obvious to you, but I haven't had much experience in the performance critical aspects of C++ programming. #include <ctime> #include <map> #include <vector> #include <iostream> struct mystruct { char key; int value; mystruct(char k = 0, int v = 0) : key(k), value(v) { } }; int find(const std::vector<mystruct>& ref, char key) { for (std::vector<mystruct>::const_iterator i = ref.begin(); i != ref.end(); ++i) if (i->key == key) return i->value; return -1; } int main() { std::map<char, int> mymap; std::vector<mystruct> myvec; for (int i = 'a'; i < 'a' + 26; ++i) { mymap[i] = i - 'a'; myvec.push_back(mystruct(i, i - 'a')); } int pre = clock(); for (int i = 0; i < 10000000; ++i) { find(myvec, 'z'); } std::cout << "linear scan: milli " << clock() - pre << "\n"; pre = clock(); for (int i = 0; i < 10000000; ++i) { mymap['z']; } std::cout << "map scan: milli " << clock() - pre << "\n"; return 0; }

  Read the article

• How can I obtain the IP address of my server program?

  - by Dr Dork

  Hello! This question is related to another question I just posted. I'm prepping for a simple work project and am trying to familiarize myself with the basics of socket programming in a Unix dev environment. At this point, I have some basic server side code and client side code setup to communicate. Currently, my client code successfully connects to the server code and the server code sends it a test message, then both quit out. Perfect! That's exactly what I wanted to accomplish. Now I'm playing around with the functions used to obtain info about the two environments (server and client). I'd like to obtain my server program's IP address. Here's the code I currently have to do this, but it's not working... int sockfd; unsigned int len; socklen_t sin_size; char msg[]="test message"; char buf[MAXLEN]; int st, rv; struct addrinfo hints, *serverinfo, *p; struct sockaddr_storage client; char s[INET6_ADDRSTRLEN]; char ip[INET6_ADDRSTRLEN]; //zero struct memset(&hints,0,sizeof(hints)); hints.ai_family = AF_UNSPEC; hints.ai_socktype = SOCK_STREAM; hints.ai_flags = AI_PASSIVE; //get the server info if((rv = getaddrinfo(NULL, SERVERPORT, &hints, &serverinfo ) != 0)){ perror("getaddrinfo"); exit(-1); } // loop through all the results and bind to the first we can for( p = serverinfo; p != NULL; p = p->ai_next) { //Setup the socket if( (sockfd = socket( p->ai_family, p->ai_socktype, p->ai_protocol )) == -1 ) { perror("socket"); continue; } //Associate a socket id with an address to which other processes can connect if(bind(sockfd, p->ai_addr, p->ai_addrlen) == -1){ close(sockfd); perror("bind"); continue; } break; } if( p == NULL ){ perror("Fail to bind"); } inet_ntop(p->ai_family, get_in_addr((struct sockaddr *)p->ai_addr), s, sizeof(s)); printf("Server has TCP Port %s and IP Address %s\n", SERVERPORT, s); and the output for the IP is always empty... server has TCP Port 21412 and IP Address :: any ideas for what I'm missing? thanks in advance for your help! this stuff is really complicated at first.

  Read the article

• [C#] How to do a search from a list with non-prefix keywords

  - by aNui

  First of all, sorry if my english or my post got any mistakes. I am programming a program to search the name from the list and I need to find them if the keyword is not in front of the names (that's what I mean non-prefix) e.g. if I my list is the music instruments and I type "guit" to the search textbox. It should find the names "Guitar, Guitarrón, Acoustic Guitar, Bass Guitar, ..." or something like this Longdo Dictionary's search suggestion. here is my simple and stupid algorithm (that's all I can do) const int SEARCHROWLIMIT = 30; private string[] DoSearch(string Input, string[] ListToSearch) { List<string> FoundNames = new List<string>(); int max = 0; bool over = false; for (int k = 0; !over; k++) { foreach (string item in ListToSearch) { max = (max > item.Length) ? max : item.Length; if (k > item.Length) continue; if (k >= max) { over = true; break; } if (!Input.Equals("Search") && item.Substring(k, item.Length - k).StartsWith(Input, StringComparison.OrdinalIgnoreCase)) { bool exist = false; int i = 0; while (!exist && i < FoundNames.Count) { if (item.Equals(FoundNames[i])) { exist = true; break; } i++; } if (!exist && FoundNames.Count < SEARCHROWLIMIT) FoundNames.Add(item); else if (FoundNames.Count >= SEARCHROWLIMIT) over = true; } } } return FoundNames.ToArray(); } I think this algorithm is too slow for a large number of names and after several trial-and-error, I decided to add SEARCHROWLIMIT to breaks the operation And I also think there're some readymade methods that can do that. And another problem is I need to search music instruments by a category like strings, percussions, ... and by the country of origins. So I need to search them with filter by type and country. please help me. P.S. Me and my friends are just student from Thailand and developing the project to compete in Microsoft Imagine Cup 2010 and please become fan on our facebook page [KRATIB][3]. And we're so sorry we don't have much information in English but you can talk to us in English.

  Read the article

• jQuery getScript function with frames

  - by user210099

  Hello.. I'm a novice at Javascript/Jquery programming, so an apology if this is a simple/silly question. I am trying to use the jQuery .getScript() function to refresh part of an existing webpage. This webpage must be run on a local file system, and a large amount of the formatting is done using frames. Right now, there’s three main frames- a sidebar which displays possible “scopes” to choose from, a main frame which displays the majority of the contents of the webpage, and a footer frame. The main entry into the page is in an index.html file, which loads a sidebar.html, main.html, and footer.html file into each of the respective frames. In turn, the main.html has a number of javascript files which it loads, the main being a main.js, which contains numerous functions to format/process the contents for this main window. After loading this javascript file, main.html loads a few javascript files, which contain the data which is going to be displayed in the main frame. These files that are loaded have a fixed data structure, and are dependent on the functions that were loaded by the main.js file. Loading the webpage works fine now, but when a user tries to switch to another “scope”, the whole webpage is reloaded to make the switch. The only difference in the webpage is the content in the main.js frame, loaded in by a different set of .js files. Enough text, let’s look at some code. When the webpage loads, I tried to add a simple call to the getScript function in a .js file at the index.html level which handles switching scopes. This file, newFile, has different data definitions than the previously loaded oldFile.js which was loaded in the main.html file. $.getScript(/js/newFile.js); However this doesn’t work, since newFile.js depends on a parseData() function which is in main.js. If I open firebug up, parseData is not located in the dom tab, which I assume is related to some scoping issue with the main.html and main.js file existing in a different frame. I tried to do some targeting to the correct “frame” but I don’t think I understand jQuery enough to know what is happening. $(window.parent.frames[0]).getScript(/js/newFile.js); Any suggestions? If I were to type into firebug console “parseData” it can not find it: “ReferenceError: parseData is not defined” However, if I type in window.parent.frames[1].parseData, it can find the function. Sorry about all the rambling and poor understanding of javascript. Hopefully someone can provide some assistance! Thanks

  Read the article

• Flickering Image in Java?

  - by Noah Cagle

  OK so I am coding a game right now to prepair for Ludum Dare SharkJam, and I am using a new method for programming, because the last method I had crashes my PC, so this one should work. Well it does work and all, better too, but the images that I put in it flicker. Here is the whole main class (where the images are drawn) package me.NoahCagle.watermaze; import java.awt.Color; import java.awt.Graphics; import java.awt.Image; import java.awt.image.BufferedImage; import javax.swing.JFrame; import me.NoahCagle.watermaze.entity.EntityShark; import me.NoahCagle.watermaze.entity.Player; import me.NoahCagle.watermaze.input.Keys; import me.NoahCagle.watermaze.map.Map; public class Game extends JFrame { private static final long serialVersionUID = 1L; Map map = new Map(0, 0); Player player = new Player(50, 30); static EntityShark shark = new EntityShark(400, 400); public Image dbImage; public Game() { setSize(800, 600); setDefaultCloseOperation(EXIT_ON_CLOSE); setLocationRelativeTo(null); setVisible(true); setTitle("Water Maze"); setResizable(false); setBackground(Color.blue); addKeyListener(new Keys()); } public static void main(String[] args) { new Game(); Thread s = new Thread(shark); s.start(); } public void paint(Graphics g) { dbImage = new BufferedImage(getWidth(), getHeight(), BufferedImage.TYPE_INT_RGB); g.drawImage(dbImage, map.x, map.y, null); g.drawImage(player.player, player.x, player.y, this); g.drawImage(shark.shark, shark.x, shark.y, this); repaint(); } } What this code does for me is makes the Images work correctly, just flickering, alot. Can anyone help me with my issue? EDIT: I think it has something to do with where I call the repaint method in the paint method, so look there.

  Read the article

• jQuery image loop not displaying any images

  - by user1871097

  I'm trying to create a very basic image gallery in jQuery. The goal is to have 3 images fade in and out in a sequential order. So image 1 is displayed, fades to image 2 etc. then the whole thing loops again. My HTML code so far is as follows: <head> <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> <title>Slider</title> <style type="text/css"> .slider{ width: 2848px; height: 2136px; overflow: hidden; margin: 30px auto; } .slider img{ width:2848px; height:2136px; display:none; } </style> <script src="//ajax.googleapis.com/ajax/libs/jquery/1.8.3/jquery.min.js"></script> <script src="//ajax.googleapis.com/ajax/libs/jqueryui/1.9.2/jquery-ui.min.js"></script> <script src="Slider2.js"></script> </head> <body onload="Slider2"();> <div class="slider"> <img id="1" src="31.jpg" border="0" alt="city"/> <img id="2" src="2vrtigo2.jpg" border="0" alt="roof"/> <img id="3" src="3.jpg" border="0" alt="sea"/> </div> </body> And the jQuery code looks like this: function Slider2() { var total = $(".slider img").size(); for (i=1; i<=total; i+=1) { $(".slider #"+i).fadeIn(600); $(".slider #"+i).delay(2000).hide; }} A quick syntactical note, I've also tried using i++ in the last argument of the For Loop. The result of this code is a blank, white page. I know some of the HTML is being compiled because the enormous 2848x2136 div creates scroll bars on the browser. If anyone could help me out, that would be greatly appreciated. Obviously I'm relatively new to web programming and would love some insight into why this isn't working. Thanks!

  Read the article

• How can I find a URL called [link] inside a block of HTML containing other URLs?

  - by DrTwox

  I'm writing a script to rewrite Reddit's RSS feeds. The script needs to find a URL named [link] inside a block of HTML that contains other URLs. The HTML is contained in an XML element called <description>. Here are two examples of the <description> element from I need to parse and the [link] I would need to get. First example: <description>submitted by &lt;a href=&#34;http://www.reddit.com/user/wildlyinaccurate&#34;&gt; wildlyinaccurate &lt;/a&gt; &lt;br/&gt; &lt;a href=&#34;http://wildlyinaccurate.com/a-hackers-guide-to-git&#34;&gt;[link]&lt;/a&gt; &lt;a href="http://www.reddit.com/r/programming/comments/26jvl7/a_hackers_guide_to_git/"&gt;[66 comments]&lt;/a&gt;</description> The [link] is: http://wildlyinaccurate.com/a-hackers-guide-to-git Second example: <description>&lt;!-- SC_OFF --&gt;&lt;div class=&#34;md&#34;&gt;&lt;p&gt;I work a support role at a company where I primarily fix issues our customers our experiencing with our software, which is a browser based application written primarily in javascript. I&amp;#39;ve been doing this for 2 years, but I want to take it to the next level (with the long term goal being that I become proficient enough to call myself a developer). I&amp;#39;ve been reading &amp;quot;Javascript The Definitive Guide&amp;quot; by O&amp;#39;Reilly but I was wondering if any of you more experienced users out there had some tips on taking it to the next level. Should I start incorporating some PHP and Jquery into my learning? Side projects on my spare time? Any good online resources? Etc. &lt;/p&gt; &lt;p&gt;Thanks! &lt;/p&gt; &lt;/div&gt;&lt;!-- SC_ON --&gt; submitted by &lt;a href=&#34;http://www.reddit.com/user/56killa&#34;&gt; 56killa &lt;/a&gt; &lt;br/&gt; &lt;a href=&#34;http://www.reddit.com/r/javascript/comments/26nduc/i_want_to_become_more_experienced_with_javascript/&#34;&gt;[link]&lt;/a&gt; &lt;a href="http://www.reddit.com/r/javascript/comments/26nduc/i_want_to_become_more_experienced_with_javascript/"&gt;[4 comments]&lt;/a&gt;</description> The [link] is: http://www.reddit.com/r/javascript/comments/26nduc/i_want_to_become_more_experienced_with_javascript/

  Read the article

< Previous Page | 483 484 485 486 487 488 489 490 491 492 493 494  | Next Page >