control structure - Page 493

RPi and Java Embedded GPIO: Big Data and Java Technology

- by hinkmond

Java Embedded and Big Data go hand-in-hand, especially as demonstrated by prototyping on a Raspberry Pi to show how well the Java Embedded platform can perform on a small embedded device which then becomes the proof-of-concept for industrial controllers, medical equipment, networking gear or any type of sensor-connected device generating large amounts of data. The key is a fast and reliable way to access that data using Java technology. In the previous blog posts you've seen the integration of a static electricity sensor and the Raspberry Pi through the GPIO port, then accessing that data through Java Embedded code. It's important to point out how this works and why it works well with Java code. First, the version of Linux (Debian Wheezy/Raspian) that is found on the RPi has a very convenient way to access the GPIO ports through the use of Linux OS managed file handles. This is key in avoiding terrible and complex coding using register manipulation in C code, or having to program in a less elegant and clumsy procedural scripting language such as python. Instead, using Java Embedded, allows a fast way to access those GPIO ports through those same Linux file handles. Java already has a very easy to program way to access file handles with a high degree of performance that matches direct access of those file handles with the Linux OS. Using the Java API java.io.FileWriter lets us open the same file handles that the Linux OS has for accessing the GPIO ports. Then, by first resetting the ports using the unexport and export file handles, we can initialize them for easy use in a Java app. // Open file handles to GPIO port unexport and export controls FileWriter unexportFile = new FileWriter("/sys/class/gpio/unexport"); FileWriter exportFile = new FileWriter("/sys/class/gpio/export"); ... // Reset the port unexportFile.write(gpioChannel); unexportFile.flush(); // Set the port for use exportFile.write(gpioChannel); exportFile.flush(); Then, another set of file handles can be used by the Java app to control the direction of the GPIO port by writing either "in" or "out" to the direction file handle. // Open file handle to input/output direction control of port FileWriter directionFile = new FileWriter("/sys/class/gpio/gpio" + gpioChannel + "/direction"); // Set port for input directionFile.write("in"); // Or, use "out" for output directionFile.flush(); And, finally, a RandomAccessFile handle can be used with a high degree of performance on par with native C code (only milliseconds to read in data and write out data) with low overhead (unlike python) to manipulate the data going in and out on the GPIO port, while the object-oriented nature of Java programming allows for an easy way to construct complex analytic software around that data access functionality to the external world. RandomAccessFile[] raf = new RandomAccessFile[GpioChannels.length]; ... // Reset file seek pointer to read latest value of GPIO port raf[channum].seek(0); raf[channum].read(inBytes); inLine = new String(inBytes); It's Big Data from sensors and industrial/medical/networking equipment meeting complex analytical software on a small constraint device (like a Linux/ARM RPi) where Java Embedded allows you to shine as an Embedded Device Software Designer. Hinkmond

Read the article

How to solve conflicts with another programmer..

- by Tio

Hi all.. I've read this question, but I think it doesn't really applies in my case.. I started to work at new company about 2 months ago with the position of senior web developer, there was already one programmer there, my position is above his, but I'm not his boss.. I don't tell him what to do.. Since the day I started to work at the company, I managed to implement a kind of a test server which he refuses to use, implemented a project management tool which he refuses to use also, and I'm in the process of implementing version control using mercurial ( damn Mercurial that's giving me so much headaches ), which he is going to use.. He is a nice guy, but just the other day we had a big discussion about "best practices", and "coding standards".. for me it's absolutely necessary to have this two things, at the place I'm currently working... otherwise it's not going to work.. This discussion, basically revolved about using short tags and the echo shortcut, and how we shouldn't use it anymore ( because I sometimes use short tags ).. this went for about 15 minutes, until I finally dropped the subject because I had work to do.. and of course he didn't budge even a millimeter, he's continuing to use short tags, and the echo shortcut and he not even cares about what I think.. When I mentioned that we are a team, he told me: "We are not a team, you work on your projects and I work on mine".. Let's just say, that the switch in my brain flipped, I raised my voice, and I told him that he was going nuts.. this was the most improper way to deal it with, I know, but there are certain things that can't be said to me.. The question here, is how do I deal with this? I want, to implement more changes on our work workflow, and I know that it's going to be a pain, with him always complaining and saying things like this.. Our boss is going to intervene in a few days, I talked to him today, the other programmer send him an email the day we had the discussion complaining.. Just to clarify, when I talk about implementing changes, I just don't appear at work, the next day with a sheet of paper, and say: "This is our we are doing things from now on! And there is no discussion.." For example, when I was trying to implement the project management tool, I took the time to talk to everybody that was going to be involved in it, to see what they think about it.. everyone was positive except him, he responded that it was just a mean to control us even more.. Does anyone has any idea on how to deal with this? PS: Truth to be told, I didn't start the best way with him, in the 4º day of work at the company, I found a really bad piece of code on our custom CMS, one of those things that I only expect to find in code produced by a programmer that has only 1 month of training in programming, and I talked to my boss about it... he showed up at the time I saw that piece of code, he saw my face and asked about it, so I told him.. I know the worst thing that can be said to a programmer is saying that their code is awful, but I've already learned that my code isn't the best of the world, so I take criticism in a completely different way now.. maybe he doesn't..

Read the article

"previousMode": Controling the Pin Action of a TopComponent

- by Geertjan

An excellent thing I learned today is that you, as a developer of a NetBeans module or NetBeans Platform application, can control the pin button. Up until today, whenever I had a TopComponent defined to appear in "rightSlidingSide" mode and then I clicked the "pin" button, as shown here... ...the TopComponent would then find itself pinned in the "explorer" mode. Would make more sense if it would be pinned in the "properties" mode, which is the docked mode closest to the "rightSlidingSide" mode. Not being able to control the "pin" button has been a recurring question (including in my own head) over several years. But the NetBeans Team's window system guru Stan Aubrecht informed me today that a "previousMode" attribute exists in the "tc-ref" file of the TopComponent. Since a few releases, that file is generated via the annotations in the TopComponent. However, "previousMode" is currently not one of the attributes exposed by the @TopComponent.Registration annotation. Therefore, what I did was this: Set "rightSlidingSide" in the "mode" attribute of the @TopComponent.Registration. Build the module. Find the "generated-layer.xml" (in the Files window) and move the layer registration of the TopComponent, including its action and menu item for opening the TopComponent, into my own manual layer within the module. Then remove all the TopComponent annotations from the TopComponent, though you can keep @ConvertAsProperties and @Messages. Then add the "previousMode" attribute, as highlighted below, into my own layer file, i.e., within the tags copied from the "generated-layer.xml": <folder name="Modes"> <folder name="rightSlidingSide"> <file name="ComparatorTopComponent.wstcref"> <![CDATA[<?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE tc-ref PUBLIC "-//NetBeans//DTD Top Component in Mode Properties 2.0//EN" "http://www.netbeans.org/dtds/tc-ref2_0.dtd"> <tc-ref version="2.0"> <tc-id id="ComparatorTopComponent"/> <state opened="false"/> <previousMode name="properties" index="0" /> </tc-ref> ]]> </file> </folder> </folder> Now when you run the application and pin the specific TopComponent defined above, i.e., in the above case, named "ComparatorTopComponent", you will find it is pinned into the "properties" mode! That's pretty cool and if you agree, then you're a pretty cool NetBeans Platform developer, and I'd love to find out more about the application/s you're creating on the NetBeans Platform! Meanwhile, I'm going to create an issue for exposing the "previousMode" attribute in the @TopComponent.Registration annotation.

Read the article

A developer’s WBS – 3 factors of 5

- by johndoucette

As a development manager, I have requested work breakdown structures (WBS) many times from the dev leads. Everyone has their own approach and why it takes sometimes days to get this simple list is often frustrating. Here is a simple way to get that elusive WBS done in 30 minutes and have 125 items in your list – well, 126. The WBS is made up of parent-child entities representing the overall outcome of the project. At the bottom of the hierarchical list should be the task item that a developer would perform in support of the branch in the list or WBS. Because I work with different dev leads on every project, I always ask the “what time value would you like to see at the lowest task in order to assign it to a developer and ensure it gets done within the timeframe”. I am particular to a task being 8 hours. Some like 8 to 24 hours. Stay away from tasks defaulting to 1 week. The task becomes way to vague and hard to manage completeness, especially on short budgets. As a developer, your focus is identifying the tasks you to accomplish in order to deliver the product. As a project manager, you will take the developer's WBS and add all the “other stuff” like quality testing, meetings, documentation, transition to maintenance, etc… Start your exercise with the name of the product you are delivering as a result of the project. You should be able to represent what you are building and deploying with one to three words. Example; XYZ Public Website Middleware BizTalk Application The reason you start with that single identifier is to always see the list as the product. It helps during each of the next three passes. Now, choose 5 tasks which in their entirety represent the product you will be delivering and add them to list under the product name you created earlier; Public Website Security Sites Infrastructure Publishing Creative Continue this concept of seeing the list as the complete picture and decompose it one more level. You should have 25 items. Public Website Security Authentication Login Control Administration DRM Workflow Sites Masterpages Page Layouts Web Parts (RIA, Multimedia) Content Types Structures Infrastructure ... Publishing ... Creative ... And one more time for a total of 125 items. The top item makes the list 126. Public Website Security Authentication Install (AD/ADAM/LDAP/SQL) Configuration Management Web App Configuration Implement Provider Login Control Login Form Login/Logoff pw change pw recover/forgot email verification Administration ... DRM ... Workflow ... Sites Masterpages Page Layouts Web Parts (RIA, Multimedia) Content Types Structures Infrastructure ... Publishing ... Creative ... The next step is to make sure the task at the bottom of every branch represents the “time value” you planned for the project. You can add more to the WBS and of course if you can’t find 5 items, 4 is fine. If a task can be done in a fraction of the time value you determined for the project, try to roll it up into a larger task. In the task actions (later when the iteration is being planned), decompose the details back to the simple tasks. Now, go estimate!

Read the article

Get to Know a Candidate (3 of 25): Virgil Goode–Constitution Party

- by Brian Lanham

DISCLAIMER: This is not a post about “Romney” or “Obama”. This is not a post for whom I am voting. Information sourced for Wikipedia. Meet Virgil Goode of the Constitution Party Goode was served as a Republican member of the United States House of Representatives from 1997 to 2009. He represented the 5th congressional district of Virginia. Goode was born in Richmond, Virginia, the son of Alice Clara (née Besecker) and Virgil Hamlin Goode. He has spent most of his life in Rocky Mount. Goode graduated with a B.A. from the University of Richmond (Phi Beta Kappa) and with a J.D. from the University of Virginia School of Law. He also is a member of Lambda Chi Alpha Fraternity and served in the Army National Guard from 1969 to 1975. Goode grew up as a Democrat. He entered politics soon after graduating from law school. At the age of 27, he won a special election to the state Senate from a Southside district as an independent after the death of the Democratic incumbent. One of his major campaign focuses at the time was advocacy for the Equal Rights Amendment. Soon after being elected, he joined the Democrats. Goode wore his party ties very loosely. He became famous for his support of the tobacco industry, expressing his fear that "his elderly mother would be denied 'the one last pleasure' of smoking a cigarette on her hospital deathbed." He was an ardent defender of gun rights while being an enthusiastic supporter of L. Douglas Wilder, who later became the first elected black governor in the history of the United States. At the Democratic Party's state political convention in 1985, Goode nominated Wilder for lieutenant governor. However, while governor, Wilder cracked down on the sale of guns in the state. After the 1995 elections resulted in a 20–20 split between Democrats and Republicans in the State Senate, Goode seriously considered voting with the Republicans on organizing the chamber. Had he done so, the State Senate would have been under Republican control for the first time since Reconstruction (the Republicans ultimately won control outright in 1999). Goode's actions at the time "forced his party to share power with Republican lawmakers in the state legislature," which further upset the Democratic Party. Goode is on the ballot in CA, FL, ID, IO, LA, MI, MN, MS, MI, NJ, NM, NY, NV, ND, OH, SC, SD, TN, UT, VA, WA, WI, WY. He is a write-in candidate in CA, CT, DC, GA, IL, IN, ME, MD, MA, MO, NC, TX, VT, WV Constitution Party This party was founded as the “U.S. Taxpayers’ Party” and considers itself conservative. The party's platform is predicated on the principles of the nation's founding documents. The party puts a large focus on immigration, calling for stricter penalties towards illegal immigrants and a moratorium on legal immigration until all federal subsidies to immigrants are discontinued.The party absorbed the American Independent Party, originally founded for George Wallace's 1968 presidential campaign. The American Independent Party of California has been an affiliate of the Constitution Party since its founding; however, current party leadership is disputed and the issue is in court to resolve this conflict. The Constitution Party has some substantial support from the Christian Right and in 2010 achieved major party status in Colorado. Learn more about Virgil Goode and Constitution Party on Wikipedia.

Read the article

PaaS, DBaaS and the Oracle Database Cloud Service

- by yaldahhakim

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} As with many widely hyped areas, there is much more variation within the broad spectrum of products referred to as “Cloud” that is immediately apparent. This variation is evident in one of the key misunderstandings about the Oracle Database Cloud Service. People could be forgiven for thinking that the Database Cloud Service was a Database-as-a-Service (DBaaS), but this is actually not true. The Database Cloud Service is a Platform-as-a-Service, which presents a different user and developer interface and has a different set of qualities. A good way to think about the difference between these two varieties of Cloud offerings is that you, the customer, have to deal with things at the level of the offering, but not for anything below it. In practice, this means that you do not have to deal with hardware or system software, including installation and maintenance, for DBaaS. You also do not have much control over configuration of these options. For PaaS, you don’t have to deal with hardware, system software, or database software – and also do not have control over these levels in the stack. So you cannot modify configuration parameters for the database with the Database Cloud Service – your interface is through SQL and PL/SQL, with Application Express, included in the Database Cloud Service, or through JDBC for Java apps running in the Java Cloud Service, or through RESTful Web Services. You will notice what is not mentioned there – SQL*Net. You cannot access your Oracle Database Cloud Service by changing an entry in the TNSNames file and using SQL*Net. So the effort involved in migrating an existing Oracle Database in your data center to the Database Cloud Service may be prohibitive. The good news is that Application Express and the RESTful Web Services wizard in the Database Cloud Service allow you to develop new applications very quickly, and, of course, the provisioning of the entire Database Cloud Service takes only minutes.

Read the article

Ubiquitous BIP

- by Tim Dexter

The last number I heard from Mike and the PM team was that BIP is now embedded in more than 40 oracle products. That's a lot of products to keep track of and to help out with new releases, etc. Its interesting to see how internal Oracle product groups have integrated BIP into their products. Just as you might integrate BIP they have had to make a choice about how to integrate. 1. Library level - BIP is a pure java app and at the bottom of the architecture are a group of java libraries that expose APIs that you can use. they fall into three main areas, data extraction, template processing and formatting and delivery. There are post processing capabilities but those APIs are embedded withing the template processing libraries. Taking this integration route you are going to need to manage templates, data extraction and processing. You'll have your own UI to allow users to control all of this for themselves. Ultimate control but some effort to build and maintain. I have been trawling some of the products during a coffee break. I found a great post on the reporting capabilities provided by BIP in the records management product within WebCenter Content 11g. This integration falls into the first category, content manager looks after the report artifacts itself and provides you the UI to manage and run the reports. 2. Web Service level - further up in the stack is the web service layer. This is sitting on the BI Publisher server as a set of services, runReport and scheduleReport are the main protagonists. However, you can also manage the reports and users (locally managed) on the server and the catalog itself via the services layer.Taking this route, you still need to provide the user interface to choose reports and run them but the creation and management of the reports is all handled by the Publisher server. I have worked with a few customer on this approach. The web services provide the ability to retrieve a list of reports the user can access; then the parameters and LOVs for the selected report and finally a service to submit the report on the server. 3. Embedded BIP server UI- the final level is not so well supported yet. You can currently embed a report and its various levels of surrounding 'chrome' inside another html based application using a URL. Check the docs here. The look and feel can be customized but again, not easy, nor documented. I have messed with running the server pages inside an IFRAME, not bad, but not great. Taking this path should present the least amount of effort on your part to get BIP integrated but there are a few gotchas you need to get around. So a reasonable amount of choices with varying amounts of effort involved. There is another option coming soon for all you ADF developers out there, the ability to drop a BIP report into your application pages. But that's for another post.

Read the article

Move on and look elsewhere, or confront the boss?

- by Meister

Background: I have my Associates in Applied Science (Comp/Info Tech) with a strong focus in programming, and I'm taking University classes to get my Bachelors. I was recently hired at a local company to be a Software Engineer I on a team of about 8, and I've been told they're looking to hire more. This is my first job, and I was offered what I feel to be an extremely generous starting salary ($30/hr essentially + benefits and yearly bonus). What got me hired was my passion for programming and a strong set of personal projects. Problem: I had no prior experience when I interviewed, so I didn't know exactly what to ask them about the company when I was hired. I've spotted a number of warning signs and annoyances since then, such as: Four developers when I started, with everyone talking about "Ben" or "Ryan" leaving. One engineer hired thirty days before me, one hired two weeks after me. Most of the department has been hiring a large number of people since I started. Extremely limited internet access. I understand the idea from an IT point of view, but not only is Facebook blocked, but so it Youtube, Twitter, and Pandora. I've also figured out that they block all access to non-DNS websites (http://xxx.xxx.xxx.xxx/) and strangely enough Miranda-IM. Low cubicles. Which is fine because I like my immediate coworkers, but they put the developers with the customer service, customer training, and QA department in a huge open room. Noise, noise, noise, and people stop to chitchat all day long. Headphones only go so far. Several emails have been sent out by my boss since I started telling us programmers to not talk about non-work-related-things like Video Games at our cubicles, despite us only spending maybe five minutes every few hours doing so. Further digging tells me that this is because someone keeps complaining that the programmers are "slacking off". People are looking over my shoulder all day. I was in the Freenode webchat to get help with a programming issue, and within minutes I had an email from my boss (to all the developers) telling us that we should NOT be connected to any outside chat servers at work. Version control system from 2005 that we must access with IE and keep the Java 1.4 JRE installed to be able to use. I accidentally updated to Java 6 one day and spent the next two days fighting with my PC to undo this "problem". No source control, no comments on anything, no standards, no code review, no unit testing, no common sense. I literally found a problem in how they handle string resource translations that stems from the simple fact that they don't trim excess white spaces, leading to developers doing: getResource("Date: ") instead of: getResource("Date") + ": ", and I was told to just add the excess white spaces back to the database instead of dealing with the issue directly. Some of these things I'd like to try to understand, but I like having IRC open to talk in a few different rooms during the day and keep in touch with friends/family over IM. They don't break my concentration (not NEARLY as much as the lady from QA stopping by to talk about her son), but because people are looking over my shoulder all day as they walk by they complain when they see something that's not "programmer-looking work". I've been told by my boss and QA that I do good, fast work. I should be judged on my work output and quality, not what I have up on my screen for the five seconds you're walking by So, my question is, even though I'm just barely at my 90 days: How do you decide to move on from a job and looking elsewhere, or when you should start working with your boss to resolve these issues? Is it even possible to get the boss to work with me in many of these things? This is the only place I heard back from even though I sent out several resume's a day for several months, and this place does pay well for putting up with their many flaws, but I'm just starting to get so miserable working here already. Should I just put up with it?

Read the article

Access denied error while mounting a shared folder?

- by SSH

I am a linux newbie and I have a very basic question. I have three machines - machineA 10.108.24.132 machineB 10.108.24.133 machineC 10.108.24.134 and all those machines have Ubuntu 12.04 installed in it and I have root access to all those three machines. Now I am supposed to do below things in my above machines - Create mount point /opt/exhibitor/conf Mount the directory in all servers. sudo mount <NFS-SERVER>:/opt/exhibitor/conf /opt/exhibitor/conf/ I have already created /opt/exhibitor/conf directory in all those three machines as mentioned above. Now I am trying to create a Mount Point on all those three machines. So I followed the below process - Install NFS support files and NFS kernel server in all the above three machines $ sudo apt-get install nfs-common nfs-kernel-server Create the shared directory in all the above three machines $ mkdir /opt/exhibitor/conf/ Edited the /etc/exports and added the entry like this in all the above three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.*(rw) Run exportfs in all the above three machines root@machineA:/# exportfs -rv exportfs: /etc/exports [1]: Neither 'subtree_check' or 'no_subtree_check' specified for export "10.108.24.*:/opt/exhibitor/conf/". Assuming default behaviour ('no_subtree_check'). NOTE: this default has changed since nfs-utils version 1.0.x exporting 10.108.24.*:/opt/exhibitor/conf Now I did showmount on machineA root@machineA:/# showmount -e 10.108.24.132 Export list for 10.108.24.132: /opt/exhibitor/conf 10.108.24.* And also I have started the NFS server like this in all the above three machines - sudo /etc/init.d/nfs-kernel-server start And now when I did this, I am getting an error - root@machineA:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ mount.nfs: access denied by server while mounting 10.108.24.132:/opt/exhibitor/conf I have also tried doing the same thing from machineB and machineC as well and still I get the same error- root@machineB:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ root@machineC:/# sudo mount -t nfs 10.108.24.132:/opt/exhibitor/conf /opt/exhibitor/conf/ Did my /etc/exports file looks good? As I have the same content in all the three machines. And also are there any logs related to NFS which I can see to find any clues? Any idea what wrong I am doing here? UPDATE:- So my etc/exports files would be like this in all the three machines - # /etc/exports: the access control list for filesystems which may be exported # to NFS clients. See exports(5). # # Example for NFSv2 and NFSv3: # /srv/homes hostname1(rw,sync,no_subtree_check) hostname2(ro,sync,no_subtree_check) # # Example for NFSv4: # /srv/nfs4 gss/krb5i(rw,sync,fsid=0,crossmnt,no_subtree_check) # /srv/nfs4/homes gss/krb5i(rw,sync,no_subtree_check) # /opt/exhibitor/conf/ 10.108.24.132(rw) /opt/exhibitor/conf/ 10.108.24.133(rw) /opt/exhibitor/conf/ 10.108.24.134(rw) Just a quick check - The IP Address that I am taking for each machine as mentioned above is like this - root@machineB:/# ifconfig eth0 Link encap:Ethernet HWaddr 00:50:56:ad:5b:a7 inet addr:10.108.24.133 Bcast:10.108.27.255 Mask:255.255.252.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5696812 errors:0 dropped:12462 overruns:0 frame:0 TX packets:5083427 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7904369145 (7.9 GB) TX bytes:601844910 (601.8 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:187144 errors:0 dropped:0 overruns:0 frame:0 TX packets:187144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:24012302 (24.0 MB) TX bytes:24012302 (24.0 MB) Here the IP Address that I am taking for machineB is 10.108.24.133.

Read the article

Oracle at ARM TechCon

- by Tori Wieldt

ARM TechCon is a technical conference for hardware and software engineers, Oct. 30-Nov 1 in Santa Clara, California. Days two and three of the conference will be geared towards systems designers and software developers, those interested in building ARM processor-based modules, boards, and systems. It will cover all of the hardware and software, tools, ranging from low-power design, networking and connectivity, open source software, and security. Oracle is a sponsor of ARM TechCon, and will present three Java sessions and a hands-on-lab: "Do You Like Coffee with Your Dessert? Java and the Raspberry Pi" - The Raspberry Pi, an ARM-powered single board computer running a full Linux distro off an SD card has caused a huge wave of interest among developers. This session looks at how Java can be used on a device such as this. Using Java SE for embedded devices and a port of JavaFX, the presentation includes a variety of demonstrations of what the Raspberry Pi is capable of. The Raspberry Pi also provides GPIO line access, and the session covers how this can be used from Java applications. Prepare to be amazed at what this tiny board can do. (Angela Caicedo, Java Evangelist) "Modernizing the Explosion of Advanced Microcontrollers with Embedded Java" - This session explains why Oracle Java ME Embedded is the right choice for building small, connected, and intelligent embedded solutions, such as industrial control applications, smart sensing, wireless connectivity, e-health, or general machine-to-machine (M2M) functionality---extending your business to new areas, driving efficiency, and reducing cost. The new Oracle Java ME Embedded product brings the benefits of Java technology to microcontroller platforms. It is a full-featured, complete, compliant software runtime with value-add features targeted to the embedded space and has the ability to interface with additional hardware components, remote manageability, and over-the-air software updates. It is accompanied by a feature-rich set of tools free of charge. (Fareed Suliman, Java Product Manager) "Embedded Java in Smart Energy and Healthcare" - This session covers embedded Java products and technologies that enable smart and connect devices in the Smart Energy and Healthcare/Medical industries. (speaker Kevin Lee) "Java SE Embedded Development on ARM Made Easy" - This Hands-on Lab aims to show that developers already familiar with the Java develop/debug/deploy lifecycle can apply those same skills to develop Java applications, using Java SE Embedded, on embedded devices. (speaker Jim Connors) In the Oracle booth #603, you can see the following demos: Industry Solutions with JavaThis exhibit consists of a number of industry solutions and how they can be powered by Java technology deployed on embedded systems. Examples in consumer devices, home gateways, mobile health, smart energy, industrial control, and tablets all powered by applications running on the Java platform are shown. Some of the solutions demonstrate the ability of Java to connect intelligent devices at the edge of the network to the datacenter or the cloud as a total end-to-end platform.Java in M2M with QualcommThis station will exhibit a new M2M solutions platform co-developed by Oracle and Qualcomm that enables wireless communications for embedded smart devices powered by Java, and share the types of industry solutions that are possible. In addition, a new platform for wearable devices based on the ARM Cortex M3 platform is exhibited.Why Java for Embedded?Demonstration platforms will show how traditional development environments, tools, and Java programming skills can be used to create applications for embedded devices. The advantages that Java provides because of the runtime's abstraction of software from hardware, modularity and scalability, security, and application portability and manageability are shared with attendees. Drop by and see why Java is an optimal applications platform for embedded systems.

Read the article

Shrinking a Linux OEL 6 virtual Box image (vdi) hosted on Windows 7

- by AndyBaker

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Recently for a customer demonstration there was a requirement to build a virtual box image with Oracle Enterprise Manager Cloud Control 12c. This meant installing OEL Linux 6 as well as creating an 11gr2 database and Oracle Enterprise Manager Cloud Control 12c on a single virtual box. Storage was sized at 300Gb using dynamically allocated storage for the virtual box and about 10Gb was used for Linux and the initial build. After copying over all the binaries and performing all the installations the virtual box became in the region of 80Gb used size on the host operating system, however internally it only really needed around 20Gb. This meant 60Gb had been used when copying over all the binaries and although now free was not returned to the host operating system due to the growth of the virtual box storage '.vdi' file. Once the ‘vdi’ storage had grown it is not shrunk automatically afterwards. Space is always tight on the laptop so it was desirable to shrink the virtual box back to a minimal size and here is the process that was followed. Install 'zerofree' Linux package into the OEL6 virtual box The RPM was downloaded and installed from a site similar to below; http://rpm.pbone.net/index.php3/stat/4/idpl/12548724/com/zerofree-1.0.1-5.el5.i386.rpm.html A simple internet search for ’zerofree Linux rpm’ was easy to perform and find the required rpm. Execute 'zerofree' package on the desired Linux file system To execute this package the desired file system needs to be mounted read only. The following steps outline this process. As root: # umount /u01 As root:# mount –o ro –t ext4 /u01 NOTE: The –o is options and the –t is the file system type found in the /etc/fstab. Next run zerofree against the required storage, this is located by a simple ‘df –h’ command to see the device associated with the mount. As root:# zerofree –v /dev/sda11 NOTE: This takes a while to run but the ‘-v’ option gives feedback on the process. What does Zerofree do? Zerofree’s purpose is to go through the file system and zero out any unused sectors on the volume so that the later stages can shrink the virtual box storage obtaining the free space back. When zerofree has completed the virtual box can be shutdown as the last stage is performed on the physical host where the virtual box vdi files are located. Compact the virtual box ‘.vdi’ files The final stage is to get virtual box to shrink back the storage that has been correctly flagged as free space after executing zerofree. On the physical host in this case a windows 7 laptop a DOS window was opened. At the prompt the first step is to put the virtual box binaries onto the PATH. C:\ >echo %PATH% The above shows the current value of the PATH environment variable. C:\ >set PATH=%PATH%;c:\program files\Oracle\Virtual Box; The above adds onto the existing path the virtual box binary location. C:\>cd c:\Users\xxxx\OEL6.1 The above changes directory to where the VDI files are located for the required virtual box machine. C:\Users\xxxxx\OEL6.1>VBoxManage.exe modifyhd zzzzzz.vdi compact NOTE: The zzzzzz.vdi is the name of the required vdi file to shrink. Finally the above command is executed to perform the compact operation on the ‘.vdi’ file(s). This also takes a long time to complete but shrinks the VDI file back to a minimum size. In the case of the demonstration virtual box OEM12c this reduced the virtual box to 20Gb from 80Gb which was a great outcome to achieve.

Read the article

ADO and Two Way Storage Tiering

- by Andy-Oracle

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 We get asked the following question about Automatic Data Optimization (ADO) storage tiering quite a bit. Can you tier back to the original location if the data gets hot again? The answer is yes but not with standard Automatic Data Optimization policies, at least not reliably. That's not how ADO is meant to operate. ADO is meant to mirror a traditional view of Information Lifecycle Management (ILM) where data will be very volatile when first created, will become less active or cool, and then will eventually cease to be accessed at all (i.e. cold). I think the reason this question gets asked is because customers realize that many of their business processes are cyclical and the thinking goes that those segments that only get used during month end or year-end cycles could sit on lower cost storage when not being used. Unfortunately this doesn't fit very well with the ADO storage tiering model. ADO storage tiering is based on the amount of free and used space in the source tablespace. There are two parameters that control this behavior, TBS_PERCENT_USED and TBS_PERCENT_FREE. When the space in the tablespace exceeds the TBS_PERCENT_USED value then segments specified in storage tiering clause(s) can be moved until the percent of free space reaches the TBS_PERCENT_FREE value. It is worth mentioning that no checks are made for available space in the target tablespace. Now, it is certainly possible to create custom functions to control storage tiering, but this can get complicated. The biggest problem is insuring that there is enough space to move the segment back to tier 1 storage, assuming that that's the goal. This isn't as much of a problem when moving from tier 1 to tier 2 storage because there is typically more tier 2 storage available. At least that's the premise since it is supposed to be less costly, lower performing and higher capacity storage. In either case though, if there isn't enough space then the operation fails. In the case of a customized function, the question becomes do you attempt to free the space so the move can be made or do you just stop and return false so that the move cannot take place? This is really the crux of the issue. Once you cross into this territory you're really going to have to implement two-way hierarchical storage and the whole point of ADO was to provide automatic storage tiering. You're probably better off using heat map and/or business access requirements and building your own hierarchical storage management infrastructure if you really want two way storage tiering. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

Read the article

How to handle multi-processing of libraries which already spawn sub-processes?

- by exhuma

I am having some trouble coming up with a good solution to limit sub-processes in a script which uses a multi-processed library and the script itself is also multi-processed. Both, the library and script are modifiable by us. I believe the question is more about design than actual code, but for what it's worth, it's written in Python. The goal of the library is to hide implementation details of various internet routers. For that reason, the library has a "Proxy" factory method which takes the IP of a router as parameter. The factory then probes the device using a set of possible proxies. Usually, there is one proxy which immediately knows that is is able to send commands to this device. All others usually take some time to return (given a timeout). One thought was already to simply query the device for an identifier, and then select the proper proxy using that, but in order to do so, you would already need to know how to query the device. Abstracting this knowledge is one of the main purposes of the library, so that becomes a little bit of a "circular-requirement"/deadlock: To connect to a device, you need to know what proxy to use, and to know what proxy to create, you need to connect to a device. So probing the device is - as we can see - the best solution so far, apart from keeping a lookup-table somewhere. The library currently kills all remaining processes once a valid proxy has been found. And yes, there is always only one good proxy per device. Currently there are about 12 proxies. So if one create a proxy instance using the factory, 12 sub-processes are spawned. So far, this has been really useful and worked very well. But recently someone else wanted to use this library to "broadcast" a command to all devices. So he took the library, and wrote his own multi-processed script. This obviously spawned 12 * n processes where n is the number of IPs to which he broadcasted. This has given us two problems: The host on which the command was executed slowed down to a near halt. Aborting the script with CTRL+C ground the system to a total halt. Not even the hardware console responded anymore! This may be due to some Python strangeness which still needs to be investigated. Maybe related to http://bugs.python.org/issue8296 The big underlying question, is how to design a library which does multi-processing, so other applications which use this library and want to be multi-processed themselves do not run into system limitations. My first thought was to require a pool to be passed to the library, and execute all tasks in that pool. In that way, the person using the library has control over the usage of system resources. But my gut tells me that there must be a better solution. Disclaimer: My experience with multiprocessing is fairly limited. I have implemented a few straightforward which did not require access control to resources. So I have not yet any practical experience with semaphores or mutexes. p.s.: In the future, we may have enough information to do this without the probing. But the database which would contain the proper information is not yet operational. Also, the design about multiprocessing a multiprocessed library intrigues me :)

Read the article

Using 3rd Party JavaScript Plugins Hardwired With ‘document.write’

- by ToStringTheory

Introduction Have you ever had the need to implement a 3rd party JavaScript plugin, but your needs didn’t fit the model and usage defined by the API or documentation of the plugin? Recently I ran into this issue when I was trying to implement a web snapshot plugin into our site. To use their plugin, you had to include a script tag to the plugin on their server with an API key. The second part of the usage was to include a <script> tag around a function call wherever you wanted a snapshot to appear. The Problem When trying to use the service, the images did not display. I checked a couple of things and didn’t find anything wrong at first.. It wasn’t until I looked at the function that was called by the inline script did I find the issue – a call to the webservice, followed by a call to ‘document.write’ in its callback. The solution in which I was trying to implement the plugin happened to be in response to an AJAX call after the document had completely loaded. After the page has loaded, document.write does nothing. My first thought for a solution was to just cache the script from the service, and edit it do something like a return function or callback that I could use to edit the document from. However, I quickly discovered that there is no way to cache the script from the service, as it had a hash in the function where it would call the server. The hash was updated every few seconds/minutes, expiring old hashes. This meant that I wouldn’t be able to edit the script and upload a new version to my server, as the script would not work after a few minutes from originally getting the script from the service. Solution The solution eluded me until I realized that this was JavaScript I was dealing with. A language designed so that you could do just about anything to any library, function, or object… At this point, the solution was simple – take control of the document.write function. Using a buffer variable, and a simple function call, it is eerily simple to perform: //what would have been output to the document var buffer = ""; //store a reference to the real document.write var dw = document.write; //redefine document.write to store to our buffer document.write = function (str) {buffer += str;} //execute the function containing calls to document.write eval('{function encapsulated in <script></script> tags}'); //restore the original document.write function (just in case) document.write = dw; That’s it. Instead of using the script tags where I wanted to include a snapshot, I called a function passing in the URL to the page I wanted a snapshot of. After that last line of code, what would have been output to the document (or not in the case of the ajax call) was instead stored in buffer. Conclusion While the solution itself is simple, coming from a background much more footed in the .Net platform, I believe that this is a prime example of always keeping the language that you are working in in mind. While this may seem obvious at first, as I KNEW I was in JavaScript, I never thought of taking control of the document.write function because I am more accustomed to the .Net world. I can’t simply replace the functionality of Console.WriteLine.

Read the article

EPPM Is a Must-Have Capability as Global Energy and Power Industries Eye US$38 Trillion in New Investments

- by Melissa Centurio Lopes

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} “The process manufacturing industry is facing an unprecedented challenge: from now until 2035, cumulative worldwide investments of US$38 trillion will be required for drilling, power generation, and other energy projects,” Iain Graham, director of energy and process manufacturing for Oracle’s Primavera, said in a recent webcast. He adds that process manufacturing organizations such as oil and gas, utilities, and chemicals must manage this level of investment in an environment of constrained capital markets, erratic supply and demand, aging infrastructure, heightened regulations, and declining global skills. In the following interview, Graham explains how the right enterprise project portfolio management (EPPM) technology can help the industry meet these imperatives. Q: Why is EPPM so important for today’s process manufacturers? A: If the industry invests US$38 trillion without proper cost controls in place, a huge amount of resources will be put at risk, especially when it comes to cost overruns that may occur in large capital projects. Process manufacturing companies must not only control costs, but also monitor all the various contractors that will be involved in each project. If you’re not managing your own workers and all the interdependencies among the different contractors, then you’ve got problems. Q: What else should process manufacturers look for? A: It’s also important that an EPPM solution has the ability to manage more than just capital projects. For example, it’s best to manage maintenance and capital projects in the same system. Say you’re due to install a new transformer in a power station as part of a capital project, but routine maintenance in that area of the facility is scheduled for that morning. The lack of coordination could lead to unforeseen delays. There are also IT considerations that impact capital projects, such as adding servers and network cable for a control system in a power station. What organizations need is a true EPPM system that’s not just for capital projects, maintenance, or IT activities, but instead an enterprisewide solution that provides visibility into all types of projects. Read the complete Q&A here and discover the practical framework for successfully managing this massive capital spending.

Read the article

Redmine with Apache 2 + Passenger nightmare --- site is up and available, but Redmine doesn't execute

- by CptSupermrkt

I was determined to figure this out myself, but I've been at it for a total of more than 10 hours, and I just can't figure this out. First, let me detail my environment (which I cannot change): Server version: Apache/2.2.15 (Unix) Ruby version: ruby 1.9.3p448 Rails version: Rails 4.0.1 Passenger version: Phusion Passenger version 4.0.5 Redmine version: 2.3.3 I have followed the Redmine instructions all the way through the test webserver to check that installation was successful with this command: ruby script/rails server webrick -e production The roadblock which I cannot overcome is getting Apache and Passenger to interpret and properly serve Redmine. I have searched pretty much every possible link within the first 10 pages or so of Google results. Everywhere I go I come across conflicting/contradicting/outdated information. We have a "weird" setup with Apache (which I inherited and cannot change). Redmine needs to be served through SSL, but Apache already has another website it's serving through SSL called Twiki. By "weird", what I mean is that our file structure is entirely different from all the tutorials out there on this version of Apache which have directories like "available-sites" and such. Here are the abbreviated versions of some of our config files: /etc/httpd/conf/httpd.conf (the global configuration file --- note that NO VirtualHost is defined here): ServerRoot "/etc/httpd" ... LoadModule passenger_module /usr/local/pkg/ruby/1.9.3-p448/lib/ruby/gems/1.9.1/gems/passenger-4.0.5/libout/apache2/mod_passenger.so PassengerRoot /usr/local/pkg/ruby/1.9.3-p448/lib/ruby/gems/1.9.1/gems/passenger-4.0.5 PassengerDefaultRuby /usr/local/pkg/ruby/1.9.3-p448/bin/ruby Include conf.d/*.conf ... User apache Group apache ... DocumentRoot "/var/www/html" So just to clarify, the above httpd.conf file does NOT have a VirtualHost section. /etc/httpd/conf.d/ssl.conf (defines the VirtualHost for ssl): Listen 443 <VirtualHost _default_:443> SSLEngine on ... SSLCertificateFile /etc/pki/tls/certs/localhost.crt </VirtualHost> /etc/httpd/conf.d/twiki.conf (this works just fine --- note this does NOT define a VirtualHost): ScriptAlias /twiki/bin/ "/var/www/twiki/bin/" Alias /twiki/ "/var/www/twiki/" <Directory "/var/www/twiki/bin"> AllowOverride None Order Deny,Allow Deny from all AuthType Basic AuthName "our team" AuthBasicProvider ldap ...a lot of ldap and authorization stuff Options ExecCGI FollowSymLinks SetHandler cgi-script </Directory> /etc/httpd/conf.d/redmine.conf: Alias /redmine/ "/var/www/redmine/public/" <Directory "/var/www/redmine/public"> Options Indexes ExecCGI FollowSymLinks Order allow,deny Allow from all AllowOverride all </Directory> The amazing thing is that this doesn't completely NOT work: I can successfully open up https://someserver/redmine/ with SSL and the https://someserver/twiki/ site remains unaffected. This tells me that it IS possible to have two separate sites up with one SSL configuration, so I don't think that's the problem. The problem is is that it opens up to the file index. I can navigate around my Redmine file structure, but no code ever gets executed. For example, there is a file included with Redmine called dispatch.fcgi in the public folder. https://someserver/redmine/dispatch.fcgi opens, but just as plain text code in the browser. As I understand it, in the case of using Passenger, CGI and FastCGI stuff is irrelevant/unused.

Read the article

creating a heirarchy of terminals or workspaces

- by intuited

<rant This question occurred to me ('occurred' meaning 'whispered seductively in my ear for the 100th time') while using GNU-screen, so I'll make that my example. However this is a much more general question about user interfaces and what I perceive as a flawmissing feature in every implementation I've yet seen. I'm wondering if there is some way to create a heirarchy/tree of terminals in a screen session. EG I'd like to have something like 1 bash 1.1 bash 1.2 bash 2 bash 3 bash 3.1 bash 3.1.1 bash 3.1.2 bash It would be good if the terminals could be labelled instead of having to be navigated to via some arrangement that I suspect doesn't exist. So then you could jump to one using eg ^A:goto happydays or ^A:goto dykstra.angry. So to generalize that: Firefox, Chrome, Internet Explorer, gnome-terminal, roxterm, konsole, yakuake, OpenOffice, Microsoft Office, Mr. Snuffaluppagus's Funtime Carousel™, and Your Mom's Jam Browser™ all offer the ability to create a flat set of tabs containing documents of an identical nature: web pages, terminals, documents, fun rideable animals, and jams. GNU-screen implements the same functionality without using tabs. Linux and OS/X window managers provide the ability to organize windows into an array of workspaces, which amounts to again, the same deal. Over the past few years, this has become a more or less ubiquitous concept which has been righteously welcomed into the far reaches of the computer interface funfest. Heavy users of these systems quickly encounter a problem with it: the set of entities is flat. In the case of workspaces, an option may be available to create a 2d array. However none of these applications furnish their users with the ability to create heirarchies, similar to filesystem directory structures, containing instances of their particular contained type. I for one am consistently bothered by this, and am wondering if the community can offer some wisdom as to why this has not happened in any of the foremost collections of computational functionality our culture has yet produced. Or if perhaps it has and I'm just an ignorant savage. I'd like to be able to not only group things into a tree structure, but also to create references (aka symbolic links, aka pointers) from one part of the structure to another, as well as apply properties (eg default directory, colorscheme, ...) recursively downward from a given node. I see no reason why we shouldn't be able to save these structures as known sessions, and apply tags to particular instances. So then you can sort through them by tag, find them by name, or just use the arrow keys (with an appropriate modifier) to move left or right and in or out of a given level. Another key combo would serve to create a branch in the place of the current terminal/webpage/lifelike statue/spreadsheet/spreadsheet sheet/presentation/jam and move that entity into the new branch, then create a fresh one as a sibling to it: a second leaf node within the same branch node. They would get along well. I find it a bit astonishing that this hasn't happened yet, and the only reason I can venture as a guess is that the creators of these fine systems do not consider such functionality to be useful to a significant portion of their userbase. I posit that the probability that that such an assumption would be correct is pretty low. On the other hand, given the relative ease with which such structures can be implemented using modern libraries/languages, it doesn't seem likely that difficulty of implementation would be a major roadblock. If it could be done in 1972 or whenever within the constraints of a filesystem driver, it should be relatively painless to implement in 2010 in a fullblown application. Given that all of these systems are capable of maintaining a set of equivalent entities, it seems unlikely that a major infrastructure overhaul would be necessary in order to enable a navigable heirarchy of them. </rant Mostly I'm just looking to start up a discussion and/or brainstorming on this topic. Any ideas, examples, criticism, or analysis are quite welcome. * Mr. Snuffaluppagus's Funtime Carousel is a registered trademark of Children's Television Workshop Inc. * Your Mom's Jam Browser is a registered trademark of Your Mom Inc.

Read the article

A faulty Caviar Blue hard drive?

- by Glister

We have a small "homemade" server running fully updated Debian Wheezy (amd64). One hard drive installed: WDC WD6400AAKS. The motherboard is ASUS M4N68T V2. The usual load: CPU: an average of 20% Each week about 50GB of additional space is occupied. About 47GB of uploaded files and 3GB of MySQL data. I'm afraid that the hard drive may be about to fail. I saw Pre-fail on few places when I ran: root@SERVER:/tmp# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD6400AAKS-XXXXXXX Serial Number: WD-XXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee XXXXXXXXXXXXX Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 28 18:55:27 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 136) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 146 021 Pre-fail Always - 5108 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2968 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15445 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2950 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 426 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2968 194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 160 000 Old_age Always - 21716 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15444 - Error SMART Read Selective Self-Test Log failed: scsi error aborted command Smartctl: SMART Selective Self Test Log Read Failed root@SERVER:/tmp# In one tutorial I read that the pre-fail is a an indication of coming failure, in another tutorial I read that it is not true. Can you guys help me decode the output of smartctl? It would be also nice to share suggestions what should I do if I want to ensure data integrity (about 50GB of new data each week, up to 2TB for the whole period I'm interested in). Maybe I will go with 2x2TB Caviar Black in RAID4?

Read the article

How to serve static files for multiple Django projects via nginx to same domain

- by thanley

I am trying to setup my nginx conf so that I can serve the relevant files for my multiple Django projects. Ultimately I want each app to be available at www.example.com/app1, www.example.com/app2 etc. They all serve static files from a 'static-files' directory located in their respective project root. The project structure: Home Ubuntu Web www.example.com ref logs app app1 app1 static bower_components templatetags app1_project templates static-files app2 app2 static templates templatetags app2_project static-files app3 tests templates static-files static app3_project app3 venv When I use the conf below, there are no problems for serving the static-files for the app that I designate in the /static/ location. I can also access the different apps found at their locations. However, I cannot figure out how to serve all of the static files for all the apps at the same time. I have looked into using the 'try_files' command for the static location, but cannot figure out how to see if it is working or not. Nginx Conf - Only serving static files for one app: server { listen 80; server_name example.com; server_name www.example.com; access_log /home/ubuntu/web/www.example.com/logs/access.log; error_log /home/ubuntu/web/www.example.com/logs/error.log; root /home/ubuntu/web/www.example.com/; location /static/ { alias /home/ubuntu/web/www.example.com/app/app1/static-files/; } location /media/ { alias /home/ubuntu/web/www.example.com/media/; } location /app1/ { include uwsgi_params; uwsgi_param SCRIPT_NAME /app1; uwsgi_modifier1 30; uwsgi_pass unix:///home/ubuntu/web/www.example.com/app1.sock; } location /app2/ { include uwsgi_params; uwsgi_param SCRIPT_NAME /app2; uwsgi_modifier1 30; uwsgi_pass unix:///home/ubuntu/web/www.example.com/app2.sock; } location /app3/ { include uwsgi_params; uwsgi_param SCRIPT_NAME /app3; uwsgi_modifier1 30; uwsgi_pass unix:///home/ubuntu/web/www.example.com/app3.sock; } # what to serve if upstream is not available or crashes error_page 400 /static/400.html; error_page 403 /static/403.html; error_page 404 /static/404.html; error_page 500 502 503 504 /static/500.html; # Compression gzip on; gzip_http_version 1.0; gzip_comp_level 5; gzip_proxied any; gzip_min_length 1100; gzip_buffers 16 8k; gzip_types text/plain text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; # Some version of IE 6 don't handle compression well on some mime-types, # so just disable for them gzip_disable "MSIE [1-6].(?!.*SV1)"; # Set a vary header so downstream proxies don't send cached gzipped # content to IE6 gzip_vary on; } Essentially I want to have something like (I know this won't work) location /static/ { alias /home/ubuntu/web/www.example.com/app/app1/static-files/; alias /home/ubuntu/web/www.example.com/app/app2/static-files/; alias /home/ubuntu/web/www.example.com/app/app3/static-files/; } or (where it can serve the static files based on the uri) location /static/ { try_files $uri $uri/ =404; } So basically, if I use try_files like above, is the problem in my project directory structure? Or am I totally off base on this and I need to put each app in a subdomain instead of going this route? Thanks for any suggestions TLDR: I want to go to: www.example.com/APP_NAME_HERE And have nginx serve the static location: /home/ubuntu/web/www.example.com/app/APP_NAME_HERE/static-files/;

Read the article

CodePlex Daily Summary for Thursday, March 18, 2010

CodePlex Daily Summary for Thursday, March 18, 2010New ProjectsBordecal tools for FxCop: Bordecal tools for FxCop provides an extended framework for FxCop rule development. It allows rule developers to avoid using embedded XML resource...DotNetNuke® Skin City: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by allsnnskins. We integrate orange color and black colour in this ...DotNetNuke® Skin Dawn: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by allsnnskins. This design reflects the theme of daylight. U...DotNetNuke® Skin Dream: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by WhNuke. Uses the DNNJDMenu skin object.DotNetNuke® Skin Expression: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Salar Golestanian of SalarO. This is a pure CSS skin with ...DotNetNuke® Skin ModernBiz: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by allsnnskins. This simple and unaffected company skin uses...DotNetNuke® Skin Profound: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by WhNuke Technology. This skin is simple and clean and the ...DotNetNuke® Skin Technology: A DotNetNuke Design Challenge skin package submitted to the "Modern Standards" category by allsnnskins. It's compatible with common browsers such ...DotNetNuke® Skin Unravel: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Salar Golestanian of SalarO. This is a pure CSS skin wit...E! - ECMAScript Runtime Environment: E! (pronounced E-Bang) is a lightweight runtime environment for editing basic ECMAScript scripts with access to .NET Framework class libraries.Easy ArcGIS Library: Easy ArcGIS Library is a set of C# .net classes that wrap the common functionality of ArcObjects, that help ArcGIS developers do a lot of common fu...File Categorizer: The File Categorizer will help people tag the files on their system for easy searching. Instead of keyword searches, you can find files based on v...GMFS Cosmos: This is a file system for Cosmos a OS that was built with C# and we will be implementing this for windows and linuxIFilter Core Implementation (interface and structures): IFilter C# implementation for you to embed when writing Windows Search capabilities into your application.Image Wall Control for Silverlight: A control for Silverlight that emulates the wall of images in the Zune. imenik_za _dev4fun: imenik is a very simple program and easy to use where you can save and organise your contacts.LegoPhysX: LegoPhysX is an atomic based physics enginePersonal Accounting: Personal system for managing financial accounts, which supports multiple accounts in different currencies. It has movement imputation and basic que...Pipes & Filters Engine: The Pipes & Filters Engine allows you to process a sequence of separate operations (filters) asynchronously in a multi-threaded manner. Filters wil...Prerequisites Checker: Check preqrequisites for software. Example: Software S1 is delivered. S1 has prerequisites PR1, PR2... PRN You may load the config file for S...Puzzle Lib: A library for creating grid-and-tile puzzles. Includes two separate UIs for the Tetriminoes puzzle as examples.QuotesPlugin for Windows Live Writer: The QuotesPlugin for Windows Live Writer lists quotes from web sites such as quotes4all.net. It's very easy for you to select your favourite ones a...RobiJ2se: Robi j2se Learning!SkinEngine: This is a Skin Framework for C# Winform, It use easy.and Create Skin GreatSQL Azure .NET Connection: This is a demo application that shows how to connect with SQL AzureSupermarket Soft: WPF Application that helps you manage your supermarket shoppings.Tally Marks for Windows Phone 7 Series: Tally Marks is a counting application. It can count almost anything you'd like to count, and it does it with tally marks! Count the number of peo...TwitCast: TwitCast is a simple notifier for Twitter using the [url:http://linqtotwitter.codeplex.com/] LINQ 2 Twitter library.WodnySwiat: Projekt grupowy wodny światWSS Task Manager Activity: A custom task creation activity that can be used in a sequential or state machine workflow. The activity was specifically developed to handle task ...New ReleasesAddress Book: Address Book: Address BookAutoAudit: AutoAudit 1.10c: Veresion 1.10 includes most of the bug fix requests. adds createdby and modifiedby columns to the audited base tables. If the user name is set by...blog for umbraco 4: Blog 4 Umbraco 2.0.26: Fixes: -Regex bug in base -Directory urls and rss link bug -Open reader bug -Rss bugDotNetNuke® Skin City: City Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by allsnnskins. We integrate orange color and black colour in this ...DotNetNuke® Skin Dawn: Dawn Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by allsnnskins. This design reflects the theme of daylight. U...DotNetNuke® Skin Dream: Dream Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Personal" category by WhNuke. Uses the DNNJDMenu skin object.DotNetNuke® Skin Expression: Expression Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Out of the box" category by Salar Golestanian of SalarO. This is a pure CSS skin with ...DotNetNuke® Skin ModernBiz: ModernBiz Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by allsnnskins. This simple and unaffected company skin uses...DotNetNuke® Skin Profound: Profound Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by WhNuke Technology. This skin is simple and clean and the ...DotNetNuke® Skin Technology: Technology Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Standards" category by allsnnskins. It's compatible with common browsers such a...DotNetNuke® Skin Unravel: Unravel Package 1.0.0: A DotNetNuke Design Challenge skin package submitted to the "Modern Business" category by Salar Golestanian of SalarO. This is a pure CSS skin with...E! - ECMAScript Runtime Environment: E! beta 1: This is really meant as a learning project for playing with dynamically compiled code, so you'd be better off getting the source code.Easy ArcGIS Library: EAGL Binaries: Easy ArcGIS Library Last Build (Version 1.1.2.4139)Easy ArcGIS Library: EAGL Binaries And Documentation: EAGL Latest Build With DocumentationEasy ArcGIS Library: EAGL Documentation: EAGL 1.1.2.4139 DocumentationEnterprise Library Extensions: Release 1.1: This is a service release for version 1.0 The installation process now works as intended. The assemblies are now visible in the Visual Studio As...Family Tree Analyzer: Version 1.2.1.0: Version 1.2.1.0 Fixed GB radio button not working renamed UK Added fixes for UK regions/shires/counties where country is missing Add country reco...Family Tree Analyzer: Version 1.3.0.0: Version 1.3.0.0 Added IGI Search results viewer Tweaked filenames of IGI search so that results window has more informative displayFile Archive: File Archive: If your computer is only word processing machine or document merge machine, this program is really fit for you. It's so...o useful! This program ar...GameStore League Manager: League Manager 1.0.4: Fixes bug 7434. Changed version number to the standard format of Major.Minor.ReleaseIFilter Core Implementation (interface and structures): Stable release: First release of interface implementation.IFilter Core Implementation (interface and structures): System.Search.Core: Ifilter interface for implementation in your own Search Providers.imenik_za _dev4fun: imenik_aplikacija: imenik aplikacija is an application easy to use where you can save and organise your contacts.KDRE - kernel debugger regular expression extension: KDRE 0.0.2: KDRE - Windbg regexp extension Changes: - amd64 build addedMapWindow6: MapWindow 6.0 msi (March 17): This release introduces some minor tweaks to the source code exposing more buffering functionality. This also fixes a problem with selecting point...MockingBird: MockingBird_2.0_RC: This is the V2.0 RC release. The documentation includes notes about the WCF components. Check this blog post for more details about the release. ...MPF for Projects - Visual Studio 2010: Visual Studio 2010 - Final Release: This contains the source code for the release of MPF for Projects corresponding to Visual Studio 2010. For Beta 2, you will need the Beta 2 release...Physics Helper for Silverlight, WPF, Blend, and Farseer: PhysicsHelper 3.0.0.4 ALPHA: This is an initial release that supports Windows Phone 7 Series Development, along with the Silverlight 3 and WPF support. It requires Visual Studi...Pocket GPW: Pocket GPW 1.2: Modyfikacje wg. change set-a 56678. Poprzednia baza danych (z wersji 1.1) jest zgodna z aktualną. Przed instalacją skopiuj poprzednią bazę danych ...Prerequisites Checker: Prerequisites Checker: Check your software prerequisitesPuzzle Lib: Puzzle Lib examples: Tetriminoes examples using a common Puzzle LIB and common Puzzle Implementation library, demonstrating a basic MVC architecture for game developmentRoTwee: RoTwee (8.0.7.0): Now you can rotate tweets by your hand !SharePoint Icon Integration: SharePoint Icon Integration PDF: This is the first stable release of the SPIconIntegration. To install the PDF Icon integration just start the setup.exe file that you will find in ...SkinEngine: SkinEngine-Src-2010-03-17: this is a release on 2010-03-17Spell Corrector: Spell Corrector 0.2 Binary: Fixed a bug in the word indexing in the database.Spell Corrector: Spell Corrector 0.2 Code: Fixed a bug in the indexing of the words in the database. Now insertion of new words in the database is faster.SQL Azure .NET Connection: LittleBlackBook.NET Release 1.0: This was a demo project for a SQL Azure Presentation at ConfooSQL Server Extended Properties Quick Editor: New release 1.5.5: Whats new: Move preferences to application settings and add a form to edit preferences. Support to add, modify and delete operations could be made ...SuperModel - A Dynamic View-Model Generator: 1.0.0.1 - Tyra+: Resolving a couple of bugs; models generated using INotifyPropertyChanged were not being created correctly. Property resolution on proxied types w...Survey - web survey & form engine: Survey 1.2.0: The Survey 1.2.0 release is based on the original sources of the Nsurvey 1.9 application. Compared to the Survey 1.1.0 version many new features ...T.S.T. the T-SQL Test Tool: Version 1.5: Version 1.5 changes: Bug fix. In V1.4 and earlier table comparison failed if the tables compared had columns with spaces in them.TwitCast: TwitCast 1.0.0.0: First release of TwitCast. Be warned that this is just a development release and there are a lot of things that remain to be done.unbinder: Unbound.dll: from change set ef6f2303dd32VCC: Latest build, v2.1.30317.0: Automatic drop of latest buildWatchersNET.TagCloud: WatchersNET.TagCloud 01.02.00: Whats New Show only Tags from Pages the Current User has View Acess (As Option) A Url can be specified for a Custom tag Added Module Package fo...WSS Task Manager Activity: 1.0: Download either the source for Moss Task Manager Activity, Workflow sample if you are interested to see how to use the activity in the workflow or ...XML pretty print for python (xmlpp): version 0.92b: Fixes issues when element name contains :Xpress - ASP.NET MVC 个人博客程序: xpress2.1.1.0317.beta: 最新beta版更改内容：模板与系统所需配置文件移动到App_Data中 Service对象注入到Controller中 Controller对象放入IOC容器中邮件发送BUG修正Most Popular ProjectsMetaSharpRawrWBFS ManagerSilverlight ToolkitASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitLiveUpload to FacebookWindows Presentation Foundation (WPF)ASP.NETMost Active ProjectsLINQ to TwitterRawrOData SDK for PHPDirectQOpen Data App Framework (ODAF)patterns & practices – Enterprise LibraryBlogEngine.NETjQuery Library for SharePoint Web ServicesMapWindow6NB_Store - Free DotNetNuke Ecommerce Catalog Module

Read the article

Using Image Source with big images in WPF

- by xyzzer

I am working on an application that allows users to manipulate multiple images by using ItemsControl. I started running some tests and found that the app has problems displaying some big images - ie. it did not work with the high resolution (21600x10800), 20MB images from http://earthobservatory.nasa.gov/Features/BlueMarble/BlueMarble_monthlies.php, though it displays the 6200x6200, 60MB Hubble telescope image from http://zebu.uoregon.edu/hudf/hudf.jpg just fine. The original solution just specified an Image control with a Source property pointing at a file on a disk (through a binding). With the Blue Marble file - the image would just not show up. Now this could be just a bug hidden somewhere deep in the funky MVVM + XAML implementation - the visual tree displayed by Snoop goes like: Window/Border/AdornerDecorator/ContentPresenter/Grid/Canvas/UserControl/Border/ContentPresenter/Grid/Grid/Grid/Grid/Border/Grid/ContentPresenter/UserControl/UserControl/Border/ContentPresenter/Grid/Grid/Grid/Grid/Viewbox/ContainerVisual/UserControl/Border/ContentPresenter/Grid/Grid/ItemsControl/Border/ItemsPresenter/Canvas/ContentPresenter/Grid/Grid/ContentPresenter/Image... Now debug this! WPF can be crazy like that... Anyway, it turned out that if I create a simple WPF application - the images load just fine. I tried finding out the root cause, but I don't want to spend weeks on it. I figured the right thing to do might be to use a converter to scale the images down - this is what I have done: ImagePath = @"F:\Astronomical\world.200402.3x21600x10800.jpg"; TargetWidth = 2800; TargetHeight = 1866; and <Image> <Image.Source> <MultiBinding Converter="{StaticResource imageResizingConverter}"> <MultiBinding.Bindings> <Binding Path="ImagePath"/> <Binding RelativeSource="{RelativeSource Self}" /> <Binding Path="TargetWidth"/> <Binding Path="TargetHeight"/> </MultiBinding.Bindings> </MultiBinding> </Image.Source> </Image> and public class ImageResizingConverter : MarkupExtension, IMultiValueConverter { public Image TargetImage { get; set; } public string SourcePath { get; set; } public int DecodeWidth { get; set; } public int DecodeHeight { get; set; } public object Convert(object[] values, Type targetType, object parameter, CultureInfo culture) { this.SourcePath = values[0].ToString(); this.TargetImage = (Image)values[1]; this.DecodeWidth = (int)values[2]; this.DecodeHeight = (int)values[3]; return DecodeImage(); } private BitmapImage DecodeImage() { BitmapImage bi = new BitmapImage(); bi.BeginInit(); bi.DecodePixelWidth = (int)DecodeWidth; bi.DecodePixelHeight = (int)DecodeHeight; bi.UriSource = new Uri(SourcePath); bi.EndInit(); return bi; } public object[] ConvertBack(object value, Type[] targetTypes, object parameter, CultureInfo culture) { throw new Exception("The method or operation is not implemented."); } public override object ProvideValue(IServiceProvider serviceProvider) { return this; } } Now this works fine, except for one "little" problem. When you just specify a file path in Image.Source - the application actually uses less memory and works faster than if you use BitmapImage.DecodePixelWidth. Plus with Image.Source if you have multiple Image controls that point to the same image - they only use as much memory as if only one image was loaded. With the BitmapImage.DecodePixelWidth solution - each additional Image control uses more memory and each of them uses more than when just specifying Image.Source. Perhaps WPF somehow caches these images in compressed form while if you specify the decoded dimensions - it feels like you get an uncompressed image in memory, plus it takes 6 times the time (perhaps without it the scaling is done on the GPU?), plus it feels like the original high resolution image also gets loaded and takes up space. If I just scale the image down, save it to a temporary file and then use Image.Source to point at the file - it will probably work, but it will be pretty slow and it will require handling cleanup of the temporary file. If I could detect an image that does not get loaded properly - maybe I could only scale it down if I need to, but Image.ImageFailed never gets triggered. Maybe it has something to do with the video memory and this app just using more of it with the deep visual tree, opacity masks etc. Actual question: How can I load big images as quickly as Image.Source option does it, without using more memory for additional copies and additional memory for the scaled down image if I only need them at a certain resolution lower than original? Also, I don't want to keep them in memory if no Image control is using them anymore.

Read the article

WPF: how to find an element in a datatemplate from an itemscontrol

- by EV

Hi, I have the following problem: the application is using the custom itemscontrol called ToolBox. The elements of a toolbox are called toolboxitems and are custom contentcontrol. Now, the toolbox stores a number of images that are retrieved from a database and displayed. For that I use a datatemplate inside the toolbox control. However, when I try to drag and drop the elements, I don't get the image object but the database component. I thought that I should then traverse the structure to find the Image element. here's the code: Toolbox: public class Toolbox : ItemsControl { private Size defaultItemSize = new Size(65, 65); public Size DefaultItemSize { get { return this.defaultItemSize; } set { this.defaultItemSize = value; } } protected override DependencyObject GetContainerForItemOverride() { return new ToolboxItem(); } protected override bool IsItemItsOwnContainerOverride(object item) { return (item is ToolboxItem); } } ToolBoxItem: public class ToolboxItem : ContentControl { private Point? dragStartPoint = null; static ToolboxItem() { FrameworkElement.DefaultStyleKeyProperty.OverrideMetadata(typeof(ToolboxItem), new FrameworkPropertyMetadata(typeof(ToolboxItem))); } protected override void OnPreviewMouseDown(MouseButtonEventArgs e) { base.OnPreviewMouseDown(e); this.dragStartPoint = new Point?(e.GetPosition(this)); } public String url { get; private set; } protected override void OnMouseMove(MouseEventArgs e) { base.OnMouseMove(e); if (e.LeftButton != MouseButtonState.Pressed) { this.dragStartPoint = null; } if (this.dragStartPoint.HasValue) { Point position = e.GetPosition(this); if ((SystemParameters.MinimumHorizontalDragDistance <= Math.Abs((double)(position.X - this.dragStartPoint.Value.X))) || (SystemParameters.MinimumVerticalDragDistance <= Math.Abs((double)(position.Y - this.dragStartPoint.Value.Y)))) { string xamlString = XamlWriter.Save(this.Content); MessageBoxResult result = MessageBox.Show(xamlString); DataObject dataObject = new DataObject("DESIGNER_ITEM", xamlString); if (dataObject != null) { DragDrop.DoDragDrop(this, dataObject, DragDropEffects.Copy); } } e.Handled = true; } } private childItem FindVisualChild<childItem>(DependencyObject obj) where childItem : DependencyObject { for (int i = 0; i < VisualTreeHelper.GetChildrenCount(obj); i++) { DependencyObject child = VisualTreeHelper.GetChild(obj, i); if (child != null && child is childItem) return (childItem)child; else { childItem childOfChild = FindVisualChild<childItem>(child); if (childOfChild != null) return childOfChild; } } return null; } } here is the xaml file for ToolBox and toolbox item: <Style TargetType="{x:Type s:ToolboxItem}"> <Setter Property="Control.Padding" Value="5" /> <Setter Property="ContentControl.HorizontalContentAlignment" Value="Stretch" /> <Setter Property="ContentControl.VerticalContentAlignment" Value="Stretch" /> <Setter Property="ToolTip" Value="{Binding ToolTip}" /> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type s:ToolboxItem}"> <Grid> <Rectangle Name="Border" StrokeThickness="1" StrokeDashArray="2" Fill="Transparent" SnapsToDevicePixels="true" /> <ContentPresenter Content="{TemplateBinding ContentControl.Content}" Margin="{TemplateBinding Padding}" SnapsToDevicePixels="{TemplateBinding UIElement.SnapsToDevicePixels}" ContentTemplate="{TemplateBinding ContentTemplate}"/> </Grid> <ControlTemplate.Triggers> <Trigger Property="IsMouseOver" Value="true"> <Setter TargetName="Border" Property="Stroke" Value="Gray" /> </Trigger> </ControlTemplate.Triggers> </ControlTemplate> </Setter.Value> </Setter> </Style> <Style TargetType="{x:Type s:Toolbox}"> <Setter Property="SnapsToDevicePixels" Value="true" /> <Setter Property="Focusable" Value="False" /> <Setter Property="Template"> <Setter.Value> <ControlTemplate> <Border BorderThickness="{TemplateBinding Border.BorderThickness}" Padding="{TemplateBinding Control.Padding}" BorderBrush="{TemplateBinding Border.BorderBrush}" Background="{TemplateBinding Panel.Background}" SnapsToDevicePixels="True"> <ScrollViewer VerticalScrollBarVisibility="Auto"> <ItemsPresenter SnapsToDevicePixels="{TemplateBinding UIElement.SnapsToDevicePixels}" /> </ScrollViewer> </Border> </ControlTemplate> </Setter.Value> </Setter> <Setter Property="ItemsPanel"> <Setter.Value> <ItemsPanelTemplate> <WrapPanel Margin="0,5,0,5" ItemHeight="{Binding Path=DefaultItemSize.Height, RelativeSource={RelativeSource AncestorType=s:Toolbox}}" ItemWidth="{Binding Path=DefaultItemSize.Width, RelativeSource={RelativeSource AncestorType=s:Toolbox}}" /> </ItemsPanelTemplate> </Setter.Value> </Setter> </Style> </ResourceDictionary> Example usage: <Toolbox x:Name="NewLibrary" DefaultItemSize="55,55" ItemsSource="{Binding}" > <ItemsControl.ItemTemplate> <DataTemplate> <StackPanel> <Image Source="{Binding Path=url}" /> </StackPanel> </DataTemplate> </ItemsControl.ItemTemplate> </Toolbox> The object that I get is a database object. When using a static resource I get the Image object. How to retrieve this Image object from a datatemplate? I though that I could use this tutorial: http://msdn.microsoft.com/en-us/library/bb613579.aspx But it does not seem to solve the problem. Could anyone suggest a solution? Thanks!

Read the article

CodePlex Daily Summary for Saturday, January 01, 2011

CodePlex Daily Summary for Saturday, January 01, 2011Popular ReleasesBloodSim: BloodSim - 1.3.0.0: - Added tally for number of boss swings and swing avoids - Removed a large number of options that were carried over from Beta and are no longer relevant - Changed stat entry to use Rating format for Dodge, Parry, Haste and Mastery - Rearranged Settings interface - BloodSim will now check for updates on startup and notify the user if a new version is available - Added option to Show/Hide the Simulation Log to increase speed during large simulationsEnhSim: EnhSim 2.2.8 ALPHA: 2.2.8 ALPHAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Rebuilt Feral Spir...CBM-Command: Version 2.0 Beta 2 - 2010-12-31: This version fixes three major bugs in Version 2.0 Beta 1 Changes(64, 128, Plus/4) Changed the timing code back to version 1.7 because the clock() function in cc65 does not reflect accurate timing. (VIC, PET) The time(NULL) function is not available on these targets and thus had to be removed. Help Hot-Key Fixed - Now when you press either F1 or H you get the help file (if the CBM-Command disk is in the drive you started CBM-Command from). Updated Help File - the new help file by popmi...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.6 Released: Hi, Today we are releasing final version of Visifire, v3.6.6 with the following new feature: * TextDecorations property is implemented in Title for Chart. * TitleTextDecorations property is implemented in Axis. * MinPointHeight property is now applicable for Column and Bar Charts. Also this release includes few bug fixes: * ToolTipText property of DataSeries was not getting applied from Style. * Chart threw exception if IndicatorEnabled property was set to true and Too...StyleCop Compliant Visual Studio Code Snippets: Visual Studio Code Snippets - January 2011: StyleCop Compliant Visual Studio Code Snippets Visual Studio 2010 provides C# developers with 38 code snippets, enhancing developer productivty and increasing the consistency of the code. Within this project the original code snippets have been refactored to provide StyleCop compliant versions of the original code snippets while also adding many new code snippets. Within the January 2011 release you'll find 82 code snippets to make you more productive and the code you write more consistent!...WPF Application Framework (WAF): WPF Application Framework (WAF) 2.0.0.2: Version: 2.0.0.2 (Milestone 2): This release contains the source code of the WPF Application Framework (WAF) and the sample applications. Requirements .NET Framework 4.0 (The package contains a solution file for Visual Studio 2010) The unit test projects require Visual Studio 2010 Professional Remark The sample applications are using Microsoft’s IoC container MEF. However, the WPF Application Framework (WAF) doesn’t force you to use the same IoC container in your application. You can use ...eCompany: eCompany v0.2.0 Build 63: Version 0.2.0 Build 63: Added Splash screen & about box Added downloading of currencies when eCompany launched for the first time (must close any bug caused by no currency rate existing) Added corp creation when eCompany launched for the first time (for now, you didn't need to edit the company.xml file manually) You just need to decompress file "eCompany v0.2.0.63.zip" into your current eCompany install directory.SQL Monitor - tracking sql server activities: SQL Monitor 3.0 alpha 8: 1. added truncate table/defrag index/check db functions 2. improved alert 3. fixed problem with alert causing config file corrupted(hopefully)Temporary Data Storage Folder: TDS Folder version 0.2 Beta: In this release following bugs are fixed: 'Send to' entry bug fixed Preferences bug fixedSilverlight File Upload and Download with Interlink: HSS Interlink v.2.1.300: Latest Release 2.1.300 - December 29th 2010 Change Log DownloadFileDialog Modified to support an absolute uri for the DownloadUri property, which is required for OOB support UploadFileDialog Modified to support an absolute uri for the UploadUri property, which is required for OOB support For existing users be sure to uninstall the older version prior to installing this version Note: The demo application is NOT included with the installer but can be reviewed here Stable release and ready...RDPAddins .NET: RDPAddins Alpha 2 (0.2.0.0): Second alpha release... Breaking changes (now this project has 0.2 version): now addin should implement RDPAddins.Common.IAddin and should me exported with RDPAddins.Common.AddinMetadataAtrribute !!!most of all old Addin base class method you can fide in IChannel or IUI interfeces see FileTransferAddin Now RDPAddins.Common.dll just provide interfaces for addin, channel, ui, and export metadata Whole implementation is in RDPAddins.exe RDPAddins.Common.dll has some documentation :) why all this...DocX: DocX v1.0.0.11: Building Examples projectTo build the Examples project, download DocX.dll and add it as a reference to the project. OverviewThis version of DocX contains many bug fixes, it is a serious step towards a stable release. Added1) Unit testing project, 2) Examples project, 3) To many bug fixes to list here, see the source code change list history.Cosmos (C# Open Source Managed Operating System): 71406: This is the second release supporting the full line of Visual Studio 2010 editions. Changes since release 71246 include: Debug info is now stored in a single .cpdb file (which is a Firebird database) Keyboard input works now (using Console.ReadLine) Console colors work (using Console.ForegroundColor and .BackgroundColor)AutoLoL: AutoLoL v1.5.0: Added the all new Masteries Browser which replaces the Quick Open combobox AutoLoL will now attemt to create file associations for mastery (*.lolm) files Each Mastery Build can now contain keywords that the Masteries Browser will use for filtering Changed the way AutoLoL detects if another instance is already running Changed the format of the mastery files to allow more information stored in* Dialogs will now focus the Ok or Cancel button which allows the user to press Return to clo...Paint.NET PSD Plugin: 1.6.0: Handling of layer masks has been greatly improved. Improved reliability. Many PSD files that previously loaded in as garbage will now load in correctly. Parallelized loading. PSD files containing layer masks will load in a bit quicker thanks to the removal of the sequential bottleneck. Hidden layers are no longer made visible on save. Many thanks to the users who helped expose the layer masks problem: Rob Horowitz, M_Lyons10. Please keep sending in those bug reports and PSD repro files!Facebook C# SDK: 4.1.1: From 4.1.1 Release: Authentication bug fix caused by facebook change (error with redirects in Safari) Authenticator fix, always returning true From 4.1.0 Release Lots of bug fixes Removed Dynamic Runtime Language dependencies from non-dynamic platforms. Samples included in release for ASP.NET, MVC, Silverlight, Windows Phone 7, WPF, WinForms, and one Visual Basic Sample Changed internal serialization to use Json.net BREAKING CHANGE: Canvas Session is no longer supported. Use Signed...Catel - WPF and Silverlight MVVM library: 1.0.0: And there it is, the final release of Catel, and it is no longer a beta version!Euro for Windows XP: ChangeRegionalSettings 1..0: *Rocket Framework (.Net 4.0): Rocket Framework for Windows V 1.0.0: Architecture is reviewed and adjusted in a way so that I can introduce the Web version and WPF version of this framework next. - Rocket.Core is introduced - Controller button functions revisited and updated - DB is renewed to suite the implemented features - Create New button functionality is changed - Add Question Handling featuresFlickr Wallpaper Rotator (for Windows desktop): Wallpaper Flickr 1.1: Some minor bugfixes (mostly covering when network connection is flakey, so I discovered them all while at my parents' house for Christmas).New Projects7-Up: PowerShell Scripts for Upgrading SharePoint 2007 to 2010: PowerShell scripts to automate the upgrade of SharePoint 2007 to SharePoint 2010 using a content database or hybrid upgrade approach.Apple Wireless Keyboard: Helper that Allows people use the Apple Wireless (or Wired possibly) Keyboard under Windows 7 without loosing the mac functionalityckTest: testtesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttesttestCrude - .Net Dependency Management: Crude is light dependency management for .net, there was no dependency management solution for .net as Maven or Ivy until now. DeepTime: Event tacking, management and plotting site.Dev/Test Cloud Platform: Dev/Test Cloud Platform is implemented by Beyondsoft and Microsoft. The platform is dedicated to software development and test scenarios. With Dev/Test Cloud you can save your cost, improve work efficiency, and improve product quality.Image Viewer (wpf version): Image viewer helps windows users to review images on their computer. It is written i Csharp and wpf.LNOne: All common code, framework code, utility code in one.LOGL::GLib: LOGL::GLib is an OpenGL game library written in C++ that allows new C++/OpenGL programmers to focus more on the game and less on the details.MAPI.GUI: Graphical program uses function from mcopyapi.codeplex.com and mdeleteapi.codeplex.com console programs. Program support longPath (above 259 chars and less 32000 chars)Movie Collection Manager: Gerenciador que ajuda a manusear coleção de filmes. Possui uma interface super atraente e simples de usar. Ferramentas e tecnologias usadas: - Visual C# 2010 Express - SQL Server 2008 R2 Express - Windows Forms - Entity Framework OBS: Projeto concorrente do Desafio .NETMyStudioServer.com: Source code for the DotNetNuke http://MyStudioServer.com websiteNusya Tester: A software to create and use various tests with right answers explanations to help one in self-education. It's developed in C#Project Zylaphon: Project Zylaphon is a C# GPL Open Source Computer Aided Music Composition System. Its design goals include highly interactive composition, music computation, and analysis; system control to be provided by an A.I. goal based agenda and quasi Blackboard for maximum flexibility.Remember The Task: RememberTheTask makes it easier to remember what you have been doing the last hour. It's developed in Visual Basic.Rent Payments Scheduling: Register rent schedules and keep track of them.Simple MVVM Toolkit for Silverlight: Simple MVVM Toolkit makes it easier to develop Silverlight applications using the Model-View-ViewModel design pattern.Sparrow.NET HtmlTemplate: Its a template engine for generating web pages.(?????HTML?????，??????html Tag???????html????。)SQLDiagUI: SQLDiagUI provides a GUI for Microsoft SQlDiag Utility which allows users to create a configuration file and start/stop/schedule SQLDiag against a SQL Server.Test Control: testing frameworkTwicko: Simple twitter client.Unity3D Utilities: Unity3D Utilities provides additional functionality to Unity3D (3.0+) via extensions, utilities, mini-frameworks, etc.VBA Composite Controls Object Model: VBA Composite Controls encapsulate complex event-driven interactions between ActiveX controls and other objects in Microsoft Office. It's uses are limited only by the imagination, from binding controls together for updating, to creating unique user interfaces!World of Warcraft Backit up(wow backit up): a project that helps you backup and restore your settings in wow easilyYamma: Yet Another Money Management Application. Build in .NET 4, SQLCE, LINQ and the Entity Framework.

Read the article

CodePlex Daily Summary for Thursday, April 01, 2010

CodePlex Daily Summary for Thursday, April 01, 2010New ProjectsASP.NET Bing Maps: Extensible and easy to use, this is ASP.NET Bing Maps Control. Drag & Drop and is ready to go. You can configure map mode, map style, add a PushPin...Bricks' Bane: Bricks' Bane is a brick breaker game developed using XNA and published on XBox Live Indy Games. Source code includes a C# library useful for game d...cURL for dotnet: Another dotnet binding for libcurl see http://curl.haxx.se for more info about cURL/libcurlCustom Functoid que acessa o banco de dados SQL: Functoid para Biztalk Server 2006 utilizando dados do SQL Server 2005FEI STU Pharmacy e-shop: Elektronicky obchod s liekmi Vytvorte jednoduchú klient-server aplikáciu, ktorá bude realizovať elektronický obchod s liekmi. Moduly: 1. e-shop f...Flavours of Wix: Investigating building DSL's to create installers based on WIXFulcrum: Fulcrum is a code generation framework built on top of the T4 technology in Visual Studio. GreviousAngel: New team projectHabanero Inferno: Habanero Inferno coming soon.Kawo Pounga !: A useless game !!!LetsXNA!!: This is a project created by members of Linked In group Lets XNA!! to build a XNA game and have fun in the process. The goal is to build a simple ...Linq To Naver , Custom Linq Provider for Naver searchengine OpenAPI: <project name>Linq to Naver </project name> <programming language>C#, CSharp</programming language>LocoSync: LocoSync is a file Syncronization/Backup/Archiver program, which is easily extendable. It is easy to add new syncronization methods using C# code.Natural Language Processing: Natural Language ProcessingNop Commerce Azure: Ce projet vous permet de mettre en place rapidement et simplement votre site d'e-commerce en ligne en bénéficiant de tous les avantages de la plate...Nwinsock: Nwinsock is a component for network , Object Transfer, Pocket Compression, Support TCP,UDP Protocol, Thread Base OnTime: OnTime is a simple program from that matching game back in the day just to bring light to programming techniques. It's developed in C#.?OpenGL ES 2.0 Compact Framework Wrapper: OpenGL ES 2.0 wrapper for .NET Compact Framework. Developed on HTC HD 2 device but should run on any Windows Mobile device that has the correct lib...ortaknokta: bu proje: birkaç kişinin bir araya gelip, istedikleri konularda tartışma yapmalarına olanak saglamak icin hazırlanmaya çalışıl maktadır. P-Data: P-Data es una herramienta que permite obtener información procedente de archivos de datos (Data Profiling) a través de consultas SQL, automatizando...PowerAuras: Addon for World of Warcraft - Displays effects on screen at different conditionsPowerShell ToodleDo Module: PowerShell Module for interacting with toodledo.com online To-Do list site. RSS Reader for Windows Phone 7: This RSS Reader application for windows 7Streamlet Containers: This is my implement of STL-style containers, including a dynamic array, a double-linked list and an r-b-tree. Just for practice. Please feel free...Troav: Social encyclopedia built using c# and the Orchard frameworkUmbraco App_Code/Usercontrol Editor: Package for Umbraco to add App_Code and usercontrol editing to the Developer section of the Umbraco administration system. Will support GeSHi editi...Vczh Reactive Programming Library: Reactive programming library provide a stream or state machine view to use .NET eventsWhoIs XML API: The project uses the public WhoIs XML API service (http://www.whoisxmlapi.com/) to obtain detailed details. The project is written in C# and serial...WPF FlowDocument Examples for VS2008 and VS2010: WPF Text Samples (especially FlowDocument) on the various possible effects: sub- and super-script, ruby (a.k.a. furigana), and various others...You are here (for Windows Mobile): This sample shows you how to play a *.wav file on your device with Compact Framework 2.0. There is better support for playing music on Compact F...New Releases( λunula ): Lunula 0.4.0: Changelog Implemented a virtual machine. Implemented a compiler for the virtual machine. Added first-class continuations (call/cc) Removed co...Alter gear SQL index Management: Setup 1.0.1: Changes Test connection - successful message Connection string timeout property added Setup Project added to project source code Possible issu...ASP.NET Bing Maps: ASP.NET Bing Maps 0.1b: Project Description Extensible and easy to use, this is ASP.NET Bing Maps Control. Drag & Drop and is ready to go. You can configure map mode, map ...ASP.NET MVC Validation Library: ASP.NET MVC Validation Library 1.3: Changes since 1.2: - Support remote validation - Support custom server-side validation - The design of validation attribute is improved Note: test...BigDays 2010: HelfenHelfen - v1: PLEASE NOTE: This project is published under the Microsoft Public License (Ms-PL). http://bigdays10.codeplex.com/license IT IS A DEMO SOLUTION FOR...Caps - Manage your collection!: Caps Console 0.1.4.0 Alpha: This is preview release (Alpha quality). This release contains only limited amount of fixes and new features from user point of view. Major focus f...CSharpQuery: Version 1.0: This version is stable. Please report any possible bugs. The next release will include a sample project and index management tools. Until then pl...Custom Functoid que acessa o banco de dados SQL: Custom Functoid SQL Server: Solução do Visual Studio com código fonte e script SQL do functoid em BiztalkDawf: Dual Audio Workflow: Beta 3: Suppose if two good audio events overlap in time with a videoevent of interest. (This can only happen if PluralEyes isn't used on everything). Befo...Dirac codec user interface: Dirac User Interface (checkin 37132): Same as 36795 version, but done with the last source code.DotNetNuke® Blog: 04.00.00 RC 3: PLEASE NOTE: You may upgrade an RC 2 install. But please do not upgrade previous version of the Beta releases - please start from RC 2 or 03.05.0...DotNetNuke® Skinning Extensions: SimpleTitle Skin Object: This is an example skin object that only renders the "page name" if used in a skin and the "module title" if used in a container. No extra spans, c...Fulcrum: Fulcrum v0.9: Initial release of FulcrumHelloTipi Photos Uploader: Version 2010.03.31: De toute petites corrections : - Correction du bouton envoyer - Impossible d'interagir avec l'application quand on uploadkdar: KDAR 0.0.18: KDAR - Kernel Debugger Anti Rootkit - dispacth table's signature bases updated ( many driver's) - scripts refactored - some bug fixedLegend: Legend Libraries: The latest release.Linq To Naver , Custom Linq Provider for Naver searchengine OpenAPI: Linq to Naver: Linq to NaverLive at Education Meta Web-Service: Live at Education Meta Web Service v. 1.0: We're happy to publish final version of Live at Education Meta Web Serivce (LAEMWS). In this release: Huge list of Windows Live ID enabled servic...Live@edu SSO WebPart for MOSS 2007: WebPart 2.0: This release is based on Live@edu Meta Web Service (laemws - http://laemws.codeplex.com). It is highly recomended to use laemws version of webpart,...LocoSync: LocoSync v0.1r2010.03.31 installer: This is the first public release. Unzip and run setup. Or if you have .net 3.5 runtime available download the exetutable and try...Natural Language Processing: test1: testNop Commerce Azure: Nop Commerce Azure: Nop Commerce Full Sources with additionnals Azure Projects.Nwinsock: NWinsock: Nwinsock version 1.0 is hereOpen NFe: DANFe v1.9.8: Correção CSTOpenGL ES 2.0 Compact Framework Wrapper: v0.1 Sources: First rough release. It has a working sample application which renders a triangle with rotation. Don't expect anything great. Just a very early ...patterns & practices - Windows Azure Guidance: Code Drop 3: Second iteration of a-Expense on Azure. This release builds on the previous one and mainly focuses on replacing SQL Azure by Table Storage. We hav...Posh4DNN: Posh4DNN Scripts 2.0: This release greatly increases the speed of installation and incorporates the use of IIS and SQL Server Snap-ins for managing those services. Inst...Process Enactment Tool Framework: PET 1.1: PET Core new intermediate model with arbitrary "clean" relations among objects and several updates of the object fields (see DependencyInterfacesA...Project Tru Tiên: Elements-test V1-fix (v1): Là Elements-test V1 đã được fix các vấn đề sau: - Fix lỗi hiển thị thú cưỡi Hổ Kỳ Lân - Fix hiển thị tab tiếng trung --> sang tiếng việt - Fix hiể...Sentinel - Log Viewer: Sentinel 0.8.1 (nLog support): Build of the 0.8.1 code (svn revision 36823) which included support for both nLog and log4net that has been in SVN for a while but didn't have a bi...sgMotion Animation Library: SgMotion v1.1 (For Sunburn 1.3.1): SgMotion v1.1 (For Sunburn 1.3.1) This release includes both a Windows & Xbox sample. The sample is set to default at Forward rendering, but can e...sTASKedit: sTASKedit 44538 (Developer Alpha): + nearly all fields are viewed in this release for task verification and identifying of unknownsTest Project (ignore): asdf asdf asdf asdf asdf asdf asdf sadf sdf asdf a: ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ;dlf jkasdf ;lkasjdf ...Test Project (ignore): cdscs: csdcacacTroav: Traov20100331 Source Pre-Alpah: This is some experiements with implementing custom modules with Microsoft's Orchard frame work. This is very preliminary, and subject to change.Weather Report WebControls: WebWeatherReport: 主要文件的源代码WhoIs XML API: Initial Release: Initial ReleaseYou are here (for Windows Mobile): CAB file and Source Code: You can find more Controls and samples for Windows Mobile developers at: http://www.beemobile4.netMost Popular ProjectshmrEngineRawrWBFS ManagerASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETLiveUpload to FacebookMost Active ProjectsRawrGraffiti CMSBase Class LibrariesjQuery Library for SharePoint Web ServicesBlogEngine.NETMicrosoft Biology FoundationN2 CMSLINQ to TwitterManaged Extensibility FrameworkFarseer Physics Engine

Read the article

Learning AngularJS by Example – The Customer Manager Application

- by dwahlin

I’m always tinkering around with different ideas and toward the beginning of 2013 decided to build a sample application using AngularJS that I call Customer Manager. It’s not exactly the most creative name or concept, but I wanted to build something that highlighted a lot of the different features offered by AngularJS and how they could be used together to build a full-featured app. One of the goals of the application was to ensure that it was approachable by people new to Angular since I’ve never found overly complex applications great for learning new concepts. The application initially started out small and was used in my AngularJS in 60-ish Minutes video on YouTube but has gradually had more and more features added to it and will continue to be enhanced over time. It’ll be used in a new “end-to-end” training course my company is working on for AngularjS as well as in some video courses that will be coming out. Here’s a quick look at what the application home page looks like: In this post I’m going to provide an overview about how the application is organized, back-end options that are available, and some of the features it demonstrates. I’ve already written about some of the features so if you’re interested check out the following posts: Building an AngularJS Modal Service Building a Custom AngularJS Unique Value Directive Using an AngularJS Factory to Interact with a RESTful Service Application Structure The structure of the application is shown to the right. The homepage is index.html and is located at the root of the application folder. It defines where application views will be loaded using the ng-view directive and includes script references to AngularJS, AngularJS routing and animation scripts, plus a few others located in the Scripts folder and to custom application scripts located in the app folder. The app folder contains all of the key scripts used in the application. There are several techniques that can be used for organizing script files but after experimenting with several of them I decided that I prefer things in folders such as controllers, views, services, etc. Doing that helps me find things a lot faster and allows me to categorize files (such as controllers) by functionality. My recommendation is to go with whatever works best for you. Anyone who says, “You’re doing it wrong!” should be ignored. Contrary to what some people think, there is no “one right way” to organize scripts and other files. As long as the scripts make it down to the client properly (you’ll likely minify and concatenate them anyway to reduce bandwidth and minimize HTTP calls), the way you organize them is completely up to you. Here’s what I ended up doing for this application: Animation code for some custom animations is located in the animations folder. In addition to AngularJS animations (which are defined using CSS in Content/animations.css), it also animates the initial customer data load using a 3rd party script called GreenSock. Controllers are located in the controllers folder. Some of the controllers are placed in subfolders based upon the their functionality while others are placed at the root of the controllers folder since they’re more generic: The directives folder contains the custom directives created for the application. The filters folder contains the custom filters created for the application that filter city/state and product information. The partials folder contains partial views. This includes things like modal dialogs used in the application. The services folder contains AngularJS factories and services used for various purposes in the application. Most of the scripts in this folder provide data functionality. The views folder contains the different views used in the application. Like the controllers folder, the views are organized into subfolders based on their functionality: Back-End Services The Customer Manager application (grab it from Github) provides two different options on the back-end including ASP.NET Web API and Node.js. The ASP.NET Web API back-end uses Entity Framework for data access and stores data in SQL Server (LocalDb). The other option on the back-end is Node.js, Express, and MongoDB. Using the ASP.NET Web API Back-End To run the application using ASP.NET Web API/SQL Server back-end open the .sln file at the root of the project in Visual Studio 2012 or higher (the free Express 2013 for Web version is fine). Press F5 and a browser will automatically launch and display the application. Using the Node.js Back-End To run the application using the Node.js/MongoDB back-end follow these steps: In the CustomerManager directory execute 'npm install' to install Express, MongoDB and Mongoose (package.json). Load sample data into MongoDB by performing the following steps: Execute 'mongod' to start the MongoDB daemon Navigate to the CustomerManager directory (the one that has initMongoCustData.js in it) then execute 'mongo' to start the MongoDB shell Enter the following in the mongo shell to load the seed files that handle seeding the database with initial data: use custmgr load("initMongoCustData.js") load("initMongoSettingsData.js") load("initMongoStateData.js") Start the Node/Express server by navigating to the CustomerManager/server directory and executing 'node app.js' View the application at http://localhost:3000 in your browser. Key Features The Customer Manager application certainly doesn’t cover every feature provided by AngularJS (as mentioned the intent was to keep it as simple as possible) but does provide insight into several key areas: Using factories and services as re-useable data services (see the app/services folder) Creating custom directives (see the app/directives folder) Custom paging (see app/views/customers/customers.html and app/controllers/customers/customersController.js) Custom filters (see app/filters) Showing custom modal dialogs with a re-useable service (see app/services/modalService.js) Making Ajax calls using a factory (see app/services/customersService.js) Using Breeze to retrieve and work with data (see app/services/customersBreezeService.js). Switch the application to use the Breeze factory by opening app/services.config.js and changing the useBreeze property to true. Intercepting HTTP requests to display a custom overlay during Ajax calls (see app/directives/wcOverlay.js) Custom animations using the GreenSock library (see app/animations/listAnimations.js) Creating custom AngularJS animations using CSS (see Content/animations.css) JavaScript patterns for defining controllers, services/factories, directives, filters, and more (see any JavaScript file in the app folder) Card View and List View display of data (see app/views/customers/customers.html and app/controllers/customers/customersController.js) Using AngularJS validation functionality (see app/views/customerEdit.html, app/controllers/customerEditController.js, and app/directives/wcUnique.js) More… Conclusion I’ll be enhancing the application even more over time and welcome contributions as well. Tony Quinn contributed the initial Node.js/MongoDB code which is very cool to have as a back-end option. Access the standard application here and a version that has custom routing in it here. Additional information about the custom routing can be found in this post.

Search Results

Search found 27142 results on 1086 pages for 'control structure'.

Page 493/1086 | < Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500 | Next Page >

- by hinkmond

- by Tio

- by Geertjan

- by johndoucette

- by Brian Lanham

- by yaldahhakim

- by Tim Dexter

- by Meister

- by SSH

- by Tori Wieldt

- by AndyBaker

- by Andy-Oracle

- by exhuma

- by ToStringTheory

- by Melissa Centurio Lopes

- by CptSupermrkt

- by intuited

- by Glister

- by thanley

- by xyzzer

- by EV

- by dwahlin

< Previous Page | 489 490 491 492 493 494 495 496 497 498 499 500 | Next Page >