Search Results

Search found 18151 results on 727 pages for 'upside down'.

Page 495/727 | < Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >

• Live-Ubuntu 12.04 ran fine, now stopped booting!

  - by user89743

  I've seen similar problems to this several times in the forum, but mine is a bit different, so the other posts I saw were no help to me. When I boot Ubuntu 12.04 64-bit from live-SD-card (3GB persistence) I suddenly get this error: (initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Invalid argument Can not mount /dev/loop/0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs (it says I can type "help" for commands, but I don't know anything about how to go from there, totally new to linux) The reason I say my case is different is because my Ubuntu worked fine for over a week, even pretty fast, and now this problem happened. Before that I used to run my live ubuntu from USB sticks but that was slower (especially when booting which took 15 minutes from USB stick!). Also I kept getting the same above problem after a while when booting and had to re-create a live USB linux several times. Installing on harddrive is not an option because my harddrive has physical damage and getting a replacement will take a while, therefore I can only use live-USB or live-SD-card Ubuntu. As I said I used Ubuntu without problems for more than a week, before that as well for several weeks on USB sticks, but the above problem occured sooner or later. This time I paid attention to when it happened: I was rebooting my computer (HP 620 laptop, 4 GB RAM, 64 bit system) from SD flash card and when I was booting I selected F6 and then the first option "no acpi" or something like that...I had used it before and noticed it slowed down the time it took Linux to use. This time it caused this error. Now even when I boot normally/default I get this error. Now I'm accessing Ubuntu from my USB stick without persistence file, when I check my SD card, all the files mentioned in the error message are there and the filesystem.squashfs is 691.2 MB so nothing seems to have been deleted by accident. (I have already made many changes/downloaded programs to my SD card persistent Ubuntu and would hope to loose them, since downloading is expensive for me, and since the problem seems to re-occur...) Can anyone help me, preferably without having to create another startup disk on my SD card? I'm totally new to this. Sorry for the long posts, just didn't know what info is relevant and what isnt! Kon

  Read the article

• Unable to find good parameters for behavior of a puck in Farseer

  - by Krumelur

  EDIT: I have tried all kinds of variations now. The last one was to adjust the linear velocity in each step: newVel = oldVel * 0.9f - all of this including your proposals kind of work, however in the end if the velocity is little enough, the puck sticks to the wall and slides either vertically or horizontally. I can't get rid of this behavior. I want it to bounce, no matter how slow it is. Retitution is 1 for all objects, Friction is 0 for all. There is no gravity. What am I possibly doing wrong? In my battle to learn and understand Farseer I'm trying to setup a simple Air Hockey like table with a puck on it. The table's border body is made up from: Vertices aBorders = new Vertices( 4 ); aBorders.Add( new Vector2( -fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, fHalfHeight ) ); aBorders.Add( new Vector2( fHalfWidth, -fHalfHeight ) ); aBorders.Add( new Vector2( -fHalfWidth, -fHalfHeight ) ); FixtureFactory.AttachLoopShape( aBorders, this ); this.CollisionCategories = Category.All; this.CollidesWith = Category.All; this.Position = Vector2.Zero; this.Restitution = 1f; this.Friction = 0f; The puck body is defined with: FixtureFactory.AttachCircle( DIAMETER_PHYSIC_UNITS / 2f, 0.5f, this ); this.Restitution = 0.1f; this.Friction = 0.5f; this.BodyType = FarseerPhysics.Dynamics.BodyType.Dynamic; this.LinearDamping = 0.5f; this.Mass = 0.2f; I'm applying a linear force to the puck: this.oPuck.ApplyLinearImpulse( new Vector2( 1f, 1f ) ); The problem is that the puck and the walls appear to be sticky. This means that the puck's velocity drops to zero to quickly below a certain velocity. The puck gets reflected by the walls a couple of times and then just sticks to the left wall and continues sliding downwards the left wall. This looks very unrealistic. What I'm really looking for is that a puck-wall-collision does slow down the puck only a tiny little bit. After tweaking all values left and right I was wondering if I'm doing something wrong. Maybe some expert can comment on the parameters?

  Read the article

• Analysing SQLBits Feedback

  - by jamiet

  Earlier this week I received all the feedback that people offered on my session at SQLBits 7 in York – “SSIS Dataflow Performance Tuning” (the video is available online if you wish to see it). As you may have gathered from previous posts on this blog and my less-SQLy-focused Wordpress blog I am a big fan of collecting and tracking both personal and public data and session feedback lends itself very well to tracking because it is quantitative rather than qualitative; by that I mean attendees are invited to provide marks out of ten rather than (or, in the case of SQLBits, as well as) written comments. The SQLBits feedback is also useful because they use a consistent format – the same questions are asked each time – this means it is particularly easy to to track whether the scores that people give are trending up or down. I suspect that somewhere the SQLBits organisers have a big Analysis Services cube (ok, perhaps its an Excel pivot table) that allows them to analyse these scores per conference, speaker, track etc.… and there’s no reason that we as session speakers cannot do the same thing. To that end I have started to store my feedback in an Excel spreadsheet of my own which in the interests of transparency is available for public viewing (only a web browser required) on SkyDrive at http://cid-550f681dad532637.office.live.com/view.aspx/Public/Misc/Personal%20SQLBits%20Session%20Feedback.xlsx. I have used a pivot table to aggregate all that feedback and here is a screenshot: I am hereby making a public plea to the SQLBits organisers (on the off-chance that they are reading) to please continue to keep the feedback format consistent in the future and I encourage them to publish all of the feedback in an anonymised form. I would also encourage anyone doing conference speaking to track their conference feedback in the same way that I am doing so that you get an insight into whether or not you are improving over time. It is not difficult to setup and maintaining it as you do more sessions takes very little effort. Storing feedback data like this leads me to wider thoughts about well-known conventions and data format standardisation. Let’s imagine a utopia where there were a standard set of questions for capturing session feedback that were leveraged at every conference regardless of subject matter, location or culture; that would give rise to immense cross-conference and cross-discipline analysis – the data analyst in me goes giddy at the thought of it. It is scenarios like this that drive my interest both in data formats such as iCalendar, microformats and RDF, and in emerging movements such as the semantic web and linked data, all things which I have written about in the past. I don’t know whether we will ever reach the stage where every piece of data has structured, descriptive metadata associated with it but I live in hope. @Jamiet

  Read the article

• Partial Shader Signatures HLSL D3D11 C++

  - by ThePhD

  I had been debugging a problem I was having in a single shader file with 2 functions in it. I'm using DirectX 11, vs_5_0 and ps_5_0. I have stripped it down to its basic components to understand what was going wrong with the shaders, because the different named components of the Pixel and Vertex shaders were swapping the data being input: void QuadVertex ( inout float4 position : SV_Position, inout float4 color : COLOR0, inout float2 tex : TEXCOORD0 ) { // ViewProject is a 4x4 matrix, // just included here to show the simple passthrough of the data position = mul(position, ViewProjection); } And a Pixel Shader: float4 QuadPixel ( float4 color : COLOR0, float2 tex : TEXCOORD0 ) : SV_Target0 { // Color is filled with position data and tex is // filled with color values from the Vertex Shader return color; } The ID3D11InputLayout and associated C++ code correctly compiles the shaders and sets them up with some simple primitive data: data[0].Position.x = 0.0f * 210; data[0].Position.y = 1.0f * 160; data[0].Position.z = 0.0f; data[1].Position.x = 0.0f * 210; data[1].Position.y = 0.0f * 160; data[1].Position.z = 0.0f; data[2].Position.x = 1.0f * 210; data[2].Position.y = 1.0f * 160; data[2].Position.z = 0.0f; data[0].Colour = Colors::Red; data[1].Colour = Colors::Red; data[2].Colour = Colors::Red; data[0].Texture = Vector2::Zero; data[1].Texture = Vector2::Zero; data[2].Texture = Vector2::Zero; When used with the shader, the float4 color always ended up with the position data, and the float2 tex always ended up with the color data. After a moment, I figured out that the shader's input and output signatures needed to be in the correct order and the correct format and be laid out in the exact order of the output from the Vertex Shader, regardless of the semantics: float4 QuadPixel ( float4 pos : SV_Position, float4 color : COLOR0, float2 tex : TEXCOORD0 ) : SV_Target0 { return color; } After finding this out, My question is: Why don't the semantics map the appropriate components when going from Vertex Shader to Pixel Shader? Is there any way that I can make it so certain semantics are always mapped to other semantics, or do I always have to follow the rigid Shader Signature (in this case, Position, Color, and Texture) ? As a side note for why I'm asking: I know that when using XNA, my shader signatures for functions could differ in position and even drop items from Vertex Shader to Pixel Shader function parameters, having only the COLOR0 and TEXCOORD0 components being used (and it would still match up correctly). However, I also know that XNA relied on DX9 (and maybe a little DX10) implementation, and that maybe this kind of flexibility no longer exists in DX11?

  Read the article

• How to make an object move again after being stopped by collision in Unity?

  - by Matthew Underwood

  I have a player object which position is always centered on the main camera's viewport. This object has a Rigidbody 2D, a box and circle collider. The player moves around a level, the level has a polygon collider attached. I move the camera until the object hits against the collider, which stops the movement of the camera by setting its speed to 0. The problem happens when I want to move the camera / player object away from the collider. As the speed is already at 0, it cannot move away from the collider. The script attached to the player object, checks for collisions and applies the speed to 0 on the main camera's test script. using UnityEngine; using System.Collections; public class move : MonoBehaviour { public float speed; public test testing; // Use this for initialization void Start () { speed = 10F; testing = Camera.main.GetComponent<test>(); } // Update is called once per frame void FixedUpdate () { Vector3 p = Camera.main.ViewportToWorldPoint(new Vector3(0.5F, 0.5F, Camera.main.nearClipPlane)); transform.position = new Vector3(p.x, p.y, -1); } void OnCollisionEnter2D(Collision2D col) { testing.speed = 0; } void OnCollisionExit2D(Collision2D col) { testing.speed = 10F; } } This is the script attached to the main camera; just a simple script that changes the camera's position. using UnityEngine; using System.Collections; public class test : MonoBehaviour { public float speed; public float translationY; public float translationX; // Use this for initialization void Start () { speed = 10F; } void FixedUpdate () { translationY = Input.GetAxis("Vertical") * speed * Time.deltaTime; translationX = Input.GetAxis("Horizontal") * speed * Time.deltaTime; transform.Translate(translationX, translationY, 0); } } The player object isn't kinematic and is a fixed angle, the colliders aren't triggers and the polygon collider isn't a trigger either. The player is the red square, the collider is the pink area. -- EDIT -- From the latest change the collider set up for the player So if the X speed was disabled. It wouldnt move into the side of the polygon colider which is good, but yet you couldnt move away from it. And moving down would move inside the colider.

  Read the article

• Ray Picking Problems

  - by A Name I Haven't Decided On

  I've read so many answers on here about how to do Ray Picking, that I thought I had the idea of it down. But when I try to implement it in my game, I get garbage. I'm working with LWJGL. Here's the code: public static Ray getPick(int mouseX, int mouseY){ glPushMatrix(); //Setting up the Mouse Clip Vector4f mouseClip = new Vector4f((float)mouseX * 2 / 960f - 1, 1 - (float)mouseY * 2 / 640f ,0 ,1); //Loading Matrices FloatBuffer modMatrix = BufferUtils.createFloatBuffer(16); FloatBuffer projMatrix = BufferUtils.createFloatBuffer(16); glGetFloat(GL_MODELVIEW_MATRIX, modMatrix); glGetFloat(GL_PROJECTION_MATRIX, projMatrix); //Assigning Matrices Matrix4f proj = new Matrix4f(); Matrix4f model = new Matrix4f(); model.load(modMatrix); proj.load(projMatrix); //Multiplying the Projection Matrix by the Model View Matrix Matrix4f tempView = new Matrix4f(); Matrix4f.mul(proj, model, tempView); tempView.invert(); //Getting the Camera Position in World Space. The 4th Column of the Model View Matrix. model.invert(); Point cameraPos = new Point(model.m30, model.m31, model.m32); //Theoretically getting the vector the Picking Ray goes Vector4f rayVector = new Vector4f(); Matrix4f.transform(tempView, mouseClip, rayVector); rayVector.translate((float)-cameraPos.getX(),(float) -cameraPos.getY(),(float) -cameraPos.getZ(), 0f); rayVector.normalise(); glPopMatrix(); //This Basically Spits out a value that changes as the Camera moves. //When the Mouse moves, the values change around 0.001 points from screen edge to edge. System.out.format("Vector: %f %f %f%n", rayVector.x, rayVector.y, rayVector.z); //return new Ray(cameraPos, rayVector); return null; } I don't really know why this isn't working. I was hoping some more experienced eyes might be able to help me out. I can get the camera position like a champ, it's the vector the rays going in that I can't seem to get right. Thanks.

  Read the article

• Simple thruster like behaviour when rotating sprite

  - by ensamgud

  I'm prototyping some 2D game concepts with XNA and have added some basic keyboard inputs to control a triangle sprite. When I press key up the sprite accelerates in it's current facing direction, when I release the key it brakes down. For rotation, when I press left/right keys I rotate the sprite. Currently the sprite immedately changes direction when I rotate it. What I want is for it to keep moving in the same direction when I rotate, until I hit key up, adding thrust in whatever direction the sprite is pointing at. This would simulate thrusters on a classic space shooter like Asteroids. I'm adding an image to describe the behaviour I'm after and some code samples of how I'm doing things at the moment. This is my player struct, holding information of the sprite. public struct PlayerData { public Vector2 Position; // where to draw the sprite public Vector2 Direction; // travel direction of sprite public float Angle; // rotation of sprite public float Velocity; public float Acceleration; public float Decelleration; public float RotationAcceleration; public float RotationDecceleration; public float TopSpeed; public float Scale; } This is how I'm currently handling thrusting / braking (when pressing/releasing key up) (simplified, removed some bounds checking etc): player.Velocity += player.Acceleration * 0.1f; player.Velocity -= player.Acceleration * 0.1f; And when I rotate the sprite left and right: player.Angle -= player.RotationAcceleration * 0.1f; player.Angle += player.RotationAcceleration * 0.1f; This runs in the update loop, keeps the direction updated and updates the position: Vector2 up = new Vector2(0f, -1f); Matrix rotMatrix = Matrix.CreateRotationZ(player.Angle); player.Direction = Vector2.Transform(up, rotMatrix); player.Direction *= player.Velocity; player.Position += player.Direction; I am following along various beginner tutorials and haven't found any describing this, but I have tried some on my own without success. Do I need to change my velocity and acceleration fields to Vectors instead of floats to accomplish this type of movement? I realise my Angle and the Direction vector is currently tied together and I need to disconnect these somehow to be able to rotate freely without changing the direction of the movement, but I can't quite figure out how to do this while keeping the acceleration/decceleration functional. Would appreciate an explanation rather than pure code samples. Thanks,

  Read the article

• PASS Summit 2011: Save Money Now

  - by Bill Graziano

  Register by March 31st and save $200.  On April 1st we increase the price.  On July 1st we increase it again.  We have regular price bumps all the way through to the Summit.  You can save yourself $200 if you register by Thursday. In two years of marketing for PASS and a year of finance I’ve learned a fair bit about our pricing, why we do this and how you react to it.  Let me help you save some money! Price bumps drive registrations.  We see big spikes in the two weeks prior to a price increase.  Having a deadline with a cost attached is a great motivator to get people to take action. Registering early helps you and it helps PASS.  You get the exact same Summit at a cheaper rate.  PASS gets smoother cash flow and a better idea of how many people to expect.  We also get people that are already registered that will tell their friends about the conference. This tiered pricing lets us serve those that are very price conscious.  They can register early and take advantage of these discounts.  I know there are people that pay for this conference out of their own pockets.  This is a great way for those people to reduce the cost of the conference.  (And remember for next year that our cheapest pricing starts right after the Summit and usually goes up around the first of the year.) We also get big price bumps after we announce the program and the pre-conference sessions.  If you wrote down the 50 or so best known speakers in the SQL Server community I’m guessing we’ll have nearly all of them at the conference.  We did last year.  I expect we will this year too.  We’re going to have good sessions.  Why wait?  Register today. If you want to attend a pre-conference session you can always add it to your registration later.  Pre-con prices don’t change.  It’s very easy to update your registration and add a pre-conference session later. I want as many people as possible to attend the Summit.  It’s been a great experience for me and I hope it will be for you.  And if you are going to go, do yourself a favor and save some money.  Register today!

  Read the article

• Is there a usage count for packages or programs?

  - by math

  Motivation: I want to remove applications I do not use to speed up my package processing tasks like dist upgrades, regular updates, but also for saving disk space and other reasons. I know this is a complex topic so first I will ask my question and second I will give some answers I already found out. Question: How do I find out which package I did not used at all? For example I always use the VLC so I could remove totem package. (Which I could have been used some day, yes.) Of course package dependencies could force me to have programs installed which I will never use. Notes: Find the packages which consume much space via synaptic: Select "Status" in lower left, select "Installed" in upper left, sort column on "size" in upper right. Then you can decide which big packages you really need. Use aptitude autoremove Use ubuntu-tweak's Janitor for removing old kernel packages, old configs, apt-cache entries, etc. Manually search for applications for a given task that you usually solve with your standard app. E.g. Movie player, Music player, Office program, Browser etc. (BTW: this is what I want to be helped with my question) When removing packages I always favour "apt-get purge" over "aptitude remove --purge" as aptitude often will also remove essential packages due to package dependencies. E.g. when removing "evolution" (as I use thunderbird) aptitude wants to remove also "ubuntu-desktop" and 756 other packages as well, while apt-get just removes evolution and its helping pacakges like evolution-common. Ubuntu lense gives me most recent used applications which are candidates for keeping :) Employ deborphan as I read in this related answer: How do I clean up my harddrive? I should certainly keep essential packages: Keep only essential packages This question is pretty much a duplicate of How to see what installed packages I have never used for cleaning purposes but covering only few aspects. However one answer suggests to use a program called unusedpkg but the link seems down. There is also a program called Kleen http://code.google.com/p/kleen/ but it won't compile in 11.10. However I hacked it to compile but the results are unusable, as for example the g++ package was marked as not used for 203, but actually I used it seconds ago for compiling Kleen itself ;) So don't use this tool. On http://wiki.debian.org/DebianPackageInformation I read the the package popularity-contest will produce log files with usage statistics. Unfortunately I didn't enabled the popularity contest so I can't find this log file.

  Read the article

• Do other developers feel that as they get better, it becomes harder to get jobs?

  - by nbv4

  When I was starting out, it seemed I had a much better time getting interviews and passing them. But now that I'm more experienced, I'm finding that its harder and harder to find a job. Do other developers out there feel the same way? I'll give you an example. I did an interview last Wednesday. It was a small start-up with only one other engineer and the CEO. They flew me in from Ohio (they are SF based). When I got there, they had me write them a link shortener, which took me about 10 minutes to write. I was supposed to be there all day working on this. When I finished it early, the interviewer seemed kind of shocked. After that, we were talking, and I asked him what they use to store data. He told me Mongo. I ask why he decided to use mongo. He then stammered and mumbled his answer, which basically boiled down to "We're using it because Mongo is a the trendy database technology and we don't want to be left out", which I've found is pretty much most common reason people use NoSQL these days. The interviewer quickly ended the interview and pretty much shoved me out the door. I was supposed to have lunch with the CEO, but I he kicked me out before I had a chance. The intervier wasn't mean or rude, (and neither was I). After I got back to Ohio, I got an email from them saying "I wasn't a fit". This sot of thing happens to me all the time. I'm starting to think "not a fit" can sometimes mean "are too high of a skill level that we are". Is this all in my head, or do other experienced developers notice the same thing happening? Back when I used to struggle with coding problems, I would work with the interviewer and it would be a positive thing and I'd get hired. But now I usually blow through the coding part, and the interviewer being left speechless is working against me. Should I feign struggling with coding problems?

  Read the article

• How can I be prepared to join a company?

  - by Aerovistae

  There's more to it than that, but this title was the best way I could think of to sum it up. I'm a senior in a good computer science program, and I'm graduating early. About to start interviews and all whatnot. I'm not a super-experienced programmer, not one of those people who started in middle school. I'm decent at this, but I'm not among the best, not nearly. I have to do an awful lot of googling. So today I'm meeting some fellow for lunch at a campus cafe to discuss some front-end details when this tall, good-looking guy begs pardon, says he's new to campus, says he's wondering if we know where he can go to sign up for recruiting developers. Quickly evolves into long conversation: he's the CEO of a seems-to-be-doing-well start-up. Hiring passionate interns and full-times. Sounds great! I take one look at his site on my own computer later, immediately spot a major bug. No idea how to fix it, but I see it. I go over to the page code, and good god. It's the standard amount of code you would expect from a full-scale web application, a couple dozen pages of HTML and scripts. I don't even know where to start reading it. I've built sites from scratch, but obviously never on that scale, nor have I ever worked on one of that scale. I have no idea which bit might generate the bug. But that sets me thinking: How could someone like me possibly settle into an environment like that? A start-up is a very high-pressure working environment. I don't know if I can work at that pace under those constraints-- I would hate to let people down. And with only 10 employees, it's not like anyone has much time to help you get your bearings. Somewhere in there is a question. Can you see it? I'm asking for general advice here. Maybe even anecdotal advice. Is joining a start-up right out of college a scary process? Am I overestimating what it would take to figure out the mass of code behind this site? What's the likelihood a decent but only moderately-experienced coder could earn his pay at such a place? For instance, I know nothing of server-side/back-end programming. Never touched it. That scares me.

  Read the article

• Legitimate use of the Windows "Documents" folder in programs.

  - by romkyns

  Anyone who likes their Documents folder to contain only things they place there knows that the standard Documents folder is completely unsuitable for this task. Every program seems to want to put its settings, data, or something equally irrelevant into the Documents folder, despite the fact that there are folders specifically for this job1. So that this doesn't sound empty, take my personal "Documents" folder as an example. I don't ever use it, in that I never, under any circumstances, save anything into this folder myself. And yet, it contains 46 folders and 3 files at the top level, for a total of 800 files in 500 folders. That's 190 MB of "documents" I didn't create. Obviously any actual documents would immediately get lost in this mess. My question is: can anything be done to improve the situation sufficiently to make "Documents" useful again, say over the next 5 years? Can programmers be somehow educated en-masse not to use it as a dumping ground? Could the OS start reporting some "fake" location hidden under AppData through the existing APIs, while only allowing Explorer and the various Open/Save dialogs to know where the "real" Documents folder resides? Or are any attempts completely futile or even unnecessary? 1For the record, here's a quick summary of the various standard directories that should be used instead of "Documents": RoamingAppData for user-specific data and settings. This is the directory to use for user-specific non-temporary data. Anything placed here will be available on any machine that a given user logs on to in networks where this is configured. Do not place large files here though, because they slow down login/logout in such environments. LocalAppData for user-and-machine-specific data and settings. This data differs for every user and every machine. This is also where very large user-specific data should be placed. ProgramData for machine-specific data and settings. These are the same regardless of which user is logged on, and will not roam to other machines in a network. GetTempPath for all files that may be wiped without loss of data when not in use. This is also the place for things like caches, because like temporary data, a cache does not need to be backed up. Place your huge cache here and you'll save your user some backup trouble. "Documents" itself should only ever be used if the user specified it manually by entering a path or selecting it in a Save dialog. That is the only time it is ever appropriate to save stuff in "Documents".

  Read the article

• What arguments can I use to "sell" the BDD concept to a team reluctant to adopt it?

  - by S.Robins

  I am a bit of a vocal proponent of the BDD methodology. I've been applying BDD for a couple of years now, and have adopted StoryQ as my framework of choice when developing DotNet applications. Even though I have been unit testing for many years, and had previously shifted to a test-first approach, I've found that I get much more value out of using a BDD framework, because my tests capture the intent of the requirements in relatively clear English within my code, and because my tests can execute multiple assertions without ending the test halfway through - meaning I can see which specific assertions pass/fail at a glance without debugging to prove it. This has really been the tip of the iceberg for me, as I've also noticed that I am able to debug both test and implementation code in a more targeted manner, with the result that my productivity has grown significantly, and that I can more easily determine where a failure occurs if a problem happens to make it all the way to the integration build due to the output that makes its way into the build logs. Further, the StoryQ api has a lovely fluent syntax that is easy to learn and which can be applied in an extraordinary number of ways, requiring no external dependencies in order to use it. So with all of these benefits, you would think it an easy to introduce the concept to the rest of the team. Unfortunately, the other team members are reluctant to even look at StoryQ to evaluate it properly (let alone entertain the idea of applying BDD), and have convinced each other to try and remove a number of StoryQ elements from our own core testing framework, even though they originally supported the use of StoryQ, and that it doesn't impact on any other part of our testing system. Doing so would end up increasing my workload significantly overall and really goes against the grain, as I am convinced through practical experience that it is a better way to work in a test-first manner in our particular working environment, and can only lead to greater improvements in the quality of our software, given I've found it easier to stick with test first using BDD. So the question really comes down to the following: What arguments can I use to really drive the point home that it would be better to use StoryQ, or at the very least apply the BDD methodology? Can you point me to any anecdotal evidence that I can use to support my argument to adopt BDD as our standard method of choice? What counter arguments can you think of that could suggest that my wish to convert the team efforts to BDD might be in error? Yes, I'm happy to be proven wrong provided the argument is a sound one. NOTE: I am not advocating that we rewrite our tests in their entirety, but rather to simply start working in a different manner for all future testing work.

  Read the article

• Cheese won't start

  - by Anthony Hohenheim

  I can't start Cheese Webcam Booth. It starts loading and there is a brief moment when the window shows up but then it disappears, like it shuts itself down and it's not in system monitor. My webcam works perfectly in Skype video call. I installed and run Camorama and it gave me an error: Could not connect to video device (/dev/video0) Please check connection When I run the lsusb I get this line for my webcam: Bus 002 Device 002: ID 04f2:b210 Chicony Electronics Co., Ltd And for my graphic card, running lspci: VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) It's not a pressing matter, but it bugs my nerves, if it works on Skype, why does Cheese and other programs refuse to run. As I said, it's not a big deal but any help would be appreciated. Running Cheese in terminal: (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkHBox to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkHBox to a GtkToggleButton, but as a GtkBin subclass a GtkToggleButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkButton, but as a GtkBin subclass a GtkButton can only contain one widget at a time; it already contains a widget of type GtkLabel (cheese:11454): Gdk-WARNING **: The program 'cheese' received an X Window System error. This probably reflects a bug in the program. The error was 'BadDrawable (invalid Pixmap or Window parameter)'. (Details: serial 932 error_code 9 request_code 137 minor_code 9) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.)

  Read the article

• Second Monitor stays black/in power save mode

  - by Rob

  I'm using two Monitors, a Belinea o.display 1 (Recognized as a Rogen Tech Distribution Inc 20" by Ubuntu, but working fine) on the DVI-Output (connected via DVI-to-VGA-adapter) as my primary Monitor and a Dell 19" (Recognized correctly) on the HDMI-output (via HDMI-to-DVI adapter) as secondary monitor. The graphics controller is a GeForce 9500 GS. I'm running a fully updated Ubuntu 13.04 with nouveau 1:1.0.7-0ubuntu1. The problem is that the second monitor (Dell) never seems to come out of standby during boot: the screen stays black and the status led on the monitor stays orange (it's green when it's on). It is correctly recognized an the size of the desktop is set accordingly, it just stays black. Changing any setting via xrandr/arandr/etc. does nothing. The on-screen-menu of the monitor reports it to be in power save mode. When using the proprietary NVIDIA-Drivers, the second monitor works just find. But these drivers cause a lot of other problems on my system, so i would really like to avoid them. On Ubuntu 12.10 i had found a workaround: When moving the relative position of the second monitor slightly down and the up again, it would turn on and function normally: xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x88 --rotate normal sleep 2 xrandr --output DVI-I-1 --mode 1680x1050 --pos 1280x0 --rotate normal --output HDMI-1 --mode 1280x1024 --pos 0x0 --rotate normal This workaround stop working after the update to 13.04, and now i'm looking for a new solution. Has anyone experienced something similarity? xrandr output: Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 8192 x 8192 DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 433mm x 270mm 1680x1050 60.0*+ 1280x1024 75.0 60.0 1280x960 60.0 1152x864 75.0 1024x768 75.1 72.0 70.1 60.0 832x624 74.6 800x600 72.2 75.0 60.3 56.2 640x480 72.8 75.0 66.7 60.0 720x400 70.1 HDMI-1 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.0*+ 75.0 1152x864 75.0 1024x768 75.1 60.0 800x600 75.0 60.3 640x480 75.0 60.0 720x400 70.1 lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G96 [GeForce 9500 GS] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:01:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nouveau latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:f8000000-f9ffffff ioport:df00(Größe=128) memory:fb000000-fb07ffff Thanks for your help!

  Read the article

• SQL Saturday 194 - Exeter

  - by Dave Ballantyne

  Many kudos goes to Jonathan and Annette Allen and the others on the team for confirming SQL Saturday 194 in Exeter on the 8th and 9th of March.  The event home page is here http://www.sqlsaturday.com/194/eventhome.aspx and I delighted that myself and Dave Morrison will be presenting a full day pre-con on the 8th on favourite subjects “TSQL and Internals”. Here is the full abstract : TSQL and internals - When faced with performance issues there are many lines of attack. Tuning the engine itself can get you so far, however for maximum effect you need to understand how the engine and how it translates SQL statements into performable actions. This is not a simple task, it is a massive task to deal with a multi-table join and the number of permutations can be immense. To back up this knowledge, we can create better performing TSQL and understand the impact that is has upon the engine and recognize the pitfalls and gotcha’s that exist in SQLServer. Ultimately, there is no ‘best way’ to perform a single task only many variations of ‘it depends’ , but now we can pick the most appropriate option for the required dataload. Over the years, there have been many myths and misconceptions have grown around the product, some have basis in older versions and some are just wrong. Continuing to build on the knowledge given so far these issue will be explored and broken down and proved or disproved. Finally we will look to the future and explore SQL Server 2012 and the new functionality that that brings and some of the common uses that we will be able to address. After completion of this days pre-con, attendees will have a more complete knowledge of execution plans, and how they relate to the physical and logical actions that SQLServer will be executing on their behalf. The attendees will also have a more rounded and fuller knowledge of TSQL and the implications of incorrectly defining a query. Dave is a fountain of knowledge on execution plans and optimizer internals and ,though i may flatter myself, I’m no shrinking violet when it comes to TSQL and such matters.  I hope that if you cant join us, then there are other pre-cons available from other experts in their fields that may ‘float you boat’ too.  The pre-con page is http://sqlsouthwest.co.uk/SQLSaturday_precon.htm Also, excitingly, this pre-con day is sponsored by Fusion-IO which is a great boon for the day. If you want a more of this then i am offering a 2 day TSQL course starting on the 19th of March. More details on this are available here

  Read the article

• RAID1: can't replace faulty spare (marked again as 'faulty spare' within seconds)

  - by user212475

  I got a problem that I cannot solve: Our fileserver runs XUbuntu and 3 RAID1s. One has a problem since monday: it consists of sdb and sdc. sdb was marked as faulty by mdadm for unknown reasons. I used --remove to remove it from the RAID and then to add it by --add. All was fine, re-syncing started but never got above 0% and after a few seconds, sdb was again marked as 'faulty spare' (and therefore the RAID degraded, but clean). So I saved the first 512 byte of the old sdb to a file, bought a new HDD of same size (4TB), shut down the computer and replaced sdb physically, switched the computer back on and wrote the 512 byte back to the new drive to have the same partition info as the old drive (both are the same type, from same company). But the new drive shows the same behaviour as the old: I can add, re-syncing starts and after a few seconds its marked as 'faulty spare'. Here exactly what i did: mdadm --remove /dev/md/1 /dev/sdb maadm --detail /dev/md/1 gives me: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:56:13 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2424 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc mdadm --add /dev/md/1 /dev/sdb mdadm --detail /dev/md/1 gives me: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:49 2013 State : clean, degraded, recovering Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Rebuild Status : 0% complete Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2431 Number Major Minor RaidDevice State 2 8 16 0 faulty spare rebuilding /dev/sdb 1 8 32 1 active sync /dev/sdc and after a few seconds: /dev/md/1: Version : 1.2 Creation Time : Sat Jun 8 22:32:05 2013 Raid Level : raid1 Array Size : 3906887360 (3725.90 GiB 4000.65 GB) Used Dev Size : 3906887360 (3725.90 GiB 4000.65 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Thu Nov 7 06:57:50 2013 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 1 Spare Devices : 0 Name : File-Server:1 (local to host File-Server) UUID : 44ed561f:b733e946:e69820f4:aba9b223 Events : 2436 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 32 1 active sync /dev/sdc 2 8 16 - faulty spare /dev/sdb same behaviour if I zero the superblock (mdadm --zero-superblock /dev/sdb) before adding sdb. I do all commands as root and the system holds 3 more 4TB drives, ie the mainboard can handle them. The old harddrive was checked for errors using badblocks, but all is fine. Does anybody have any idea, what the problem is?

  Read the article

• Problem Solving vs. Solution Finding

  - by ryanabr

  By enlarge, most developers fall into these two camps I will try to explain what I mean by way of example. A manager gives the developer a task that is communicated like this: “Figure out why control A is not loading on this form”. Now, right there it could be argued that the manager should probably have given better direction and said something more like: “Control A is not loading on the Form, fix it”. They might sound like the same thing to most people, but the first statement will have the developer problem solving the reason why it is failing. The second statement should have the developer looking for the solution to make it work, not focus on why it is broken. In the end, they might be the same thing, but I usually see the first approach take way longer than the second approach. The Problem Solver: The problem solver’s approach to fixing something that is broken is likely to take the error or behavior that is being observed and start to research it using a tool like Google, or any other search engine. 7/10 times this will yield results for the most common of issues. The challenge is in the other 30% of issues that will take the problem solver down the rabbit hole and cause them not to surface for days on end while every avenue is explored for the cause of the problem. In the end, they will probably find the cause of the issue and resolve it, but the cost can be days, or weeks of work. The Solution Finder: The solution finder’s approach to a problem will begin the same way the Problem Solver’s approach will. The difference comes in the more difficult cases. Rather than stick to the pure “This has to work so I am going to work with it until it does” approach, the Solution Finder will look for other ways to get the requirements satisfied that may or may not be using the original approach. For example. there are two area of an application of externally equivalent features, meaning that from a user’s perspective, the behavior is the same. So, say that for whatever reason, area A is now not working, but area B is working. The Problem Solver will dig in to see why area A is broken, where the Solution Finder will investigate to see what is the difference between the two areas and solve the problem by potentially working around it. The other notable difference between the two types of developers described is what point they reach before they re-emerge from their task. The problem solver will likely emerge with a triumphant “I have found the problem” where as the Solution Finder will emerge with the more useful “I have the solution”. Conclusion At the end of the day, users are what drives features in software development. With out users there is no need for software. In todays world of software development with so many tools to use, and generally tight schedules I believe that a work around to a problem that takes 8 hours vs. the more pure solution to the problem that takes 40 hours is a more fruitful approach.

  Read the article

• I need help with specific types of movement.

  - by IronGiraffe

  I'm adding movable crates to my game and I need some help with my movement code. The way I've set up my movement code the crate's X and Y are moved according to a vector2 unless it hits a wall. Here's the movement code: if (frameCount % (delay / 2) == 0) { for (int i = 0; i < Math.Abs(cSpeed.X); i++) { if (!Level.PlayerHit(new Rectangle(crateBounds.X + (Math.Sign(cSpeed.X) * 32), crateBounds.Y, crateBounds.Width, crateBounds.Height))) { if (!Level.CollideTiles(crateBounds.X + (Math.Sign(cSpeed.X) * 32), crateBounds.Y, crateBounds.Width, crateBounds.Height)) { if (cSpeed.X != 0) { crateBounds.X += Math.Sign(cSpeed.X); } else { Equalize(2); } } else { cSpeed.X = 0f; } } else { if (!Level.CollideTiles(crateBounds.X - (Math.Sign(cSpeed.X) * 32), crateBounds.Y, crateBounds.Width, crateBounds.Height)) { if (cSpeed.X != 0) { crateBounds.X -= Math.Sign(cSpeed.X); } else { Equalize(2); } } else { cSpeed.X = 0f; } } } for (int i = 0; i < Math.Abs(cSpeed.Y); i++) { if (!Level.PlayerHit(new Rectangle(crateBounds.X, crateBounds.Y + Math.Sign(cSpeed.Y), crateBounds.Width, crateBounds.Height))) { if (!Level.CollideTiles(crateBounds.X, crateBounds.Y + Math.Sign(cSpeed.Y), crateBounds.Width, crateBounds.Height)) { crateBounds.Y += Math.Sign(cSpeed.Y); } else { cSpeed.Y = 0f; } } else { if (!Level.CollideTiles(crateBounds.X, crateBounds.Y - Math.Sign(cSpeed.Y), crateBounds.Width, crateBounds.Height)) { crateBounds.Y -= Math.Sign(cSpeed.Y); } else { cSpeed.Y = 0f; } } } } The frameCount and delay variables just slow down the movement somewhat. Anyway, I've added a tool to my game that acts as a gravity well (drawing objects into it's center; the closer they get to the center the faster they go) and what I'm trying to do is make it so that the crate will bounce off the player (and vice versa) when they collide. Thus far, my code only keeps the crate and player from getting stuck inside each other (the player can still get stuck under the crate, but I'll fix that later.) So what I'd like to know is how I can best make the crate bounce off the player. The other movement problem I'm having is related to another tool which allows the player to pick up crates and move around with them. The problem is that the crate's movement while being carried isn't tied to the movement script (it moves the crate itself, instead of adding to speed), which makes the crate go through walls and such. I know what I have to do: make the crate's speed match the player's speed while the player is holding it, but I need the crate to snap to a certain position (just in front of the player) when the player grabs it and it needs to switch to another position (just in front of the player on the other side) when they player faces the other direction while holding it. What would be the best way to make it switch places while keeping all the movement tied to the speed vector?

  Read the article

• Powerful Lessons in Data from the Presidential Election

  - by Christina McKeon

  Now that we’ve had a few days to recover from the U.S. presidential election, it’s a good time to take a step back from politics and look for the customer experience lessons that we can take away. The most powerful lesson is that when you know more about your base, you will have an advantage over your competition. That advantage will translate into you winning and your competition losing. Michael Scherer of TIME was given access to Obama’s data analysts two days before the election. His account is documented in Inside the Secret World of the Data Crunchers Who Helped Obama Win. What we learned from Scherer’s inside view is how well Obama’s team did in getting the right data, analyzing it, and acting on it. This data team recognized how critical it was to break down data silos within the campaign. As Scherer noted, they created “a single system that merged information from pollsters, fundraisers, field workers, consumer databases, and social-media and mobile contacts with the main Democratic voter files in the swing states.” The Obama analysis was so meticulous that they knew which celebrity and which type of celebrity event would help them maximize campaign contributions. With a single system, their data models became more precise. They determined which messages were more successful with specific demographic groups and that who made the calls mattered. Data analysis also led to many other changes in Obama’s campaign including a new ad buying strategy, using social media and applications to tap into supporters’ friends, and using new social news sites. While we did not have that same inside view into Romney’s campaign, much of the post-mortem coverage indicates that Romney’s team did not have the right analysis. As Peter Hamby of CNN wrote in Analysis: Why Romney Lost, “Romney officials had modeled an electorate that looked something like a mix of 2004 and 2008….” That historical data did not account for the changing demographics in the U.S. Does your organization approach data like the Obama or Romney team? Do you really know your base? How well can you predict what is going to happen in your business? If you haven’t already put together a strategy and plan to know more, this week’s civics lesson is a powerful reason to do it sooner rather than later. Your competitors are probably thinking the same thing that you are!

  Read the article

• Determining cause of random latency/loading issues

  - by Sherwin Flight

  I'm not sure exactly what details to post in regards to my issue, because I'm not sure what is relevant. Prior to the end of September my websites all loaded quickly, in almost all cases. Loading time wasn't usually more than a few seconds. However, since the end of September I noticed a big increase in page loading times. In some cases pages were taking 30 seconds or more to load. I do have a remote monitoring service monitoring some of the sites as well, and the image below shows the response times over the past month. The response times shown at the beginning of this graph were what the usual response times were prior to this issue occurring. You can see that there has been a significant increase in response times from the beginning to the end of this graph. The thing is, the problem is not happening 100% of the time. If I click through the site, or even just keep refreshing the page, about 25% of the time the pages load quickly, the remaining 75% of the time they load slowly. Sometimes the pages take so long to load that they time out, and don't load at all. I have contacted my hosting provider, and they said things at their end was fine. I don't believe the problem is my home internet provider, because all other websites load without a problem. The server is located in Texas, USA. This also raises another interesting point. My remote monitor checks my site from two locations, California, USA, and London, England. As you can see in the chart below the response time is actually shorter when checked from London, which doesn't seem to make sense, since the server is physically closer to the California monitoring location. I would have expected the London monitoring location to have higher response times since they are physically farther away. I should also point out that in some traceroute test I've done it seem like the first connection to the server seems to take the longest, then after that the rest of the page loads quickly. Below is a little chart showing the times for the first connection to the server. So, what could be causing this problem, and what steps can I take to resolve it or at least narrow down the problem? Sending the request to the server was very quick, and receiving the reply back seems pretty quick, but the WAIT time is really long. So it connects, sends the request, but then waits close to 30 seconds before it starts receiving data back. I am also aware that there are things I can do to speed up page loading times, like reducing the number of css/js files used on a page, compressing images, etc. This is not really what the source of the problem is though, because nothing has really changed on the site since before the problem started, and other sites on the same server are loading slowly as well. Any help or advice is much appreciated.

  Read the article

• Cloud Infrastructure has a new standard

  - by macoracle

  I have been working for more than two years now in the DMTF working group tasked with creating a Cloud Management standard. That work has culminated in the release today of the Cloud Infrastructure Management Interface (CIMI) version 1.0 by the DMTF. CIMI is a single interface that a cloud consumer can use to manage their cloud infrastructure in multiple clouds. As CIMI is adopted by the cloud vendors, no more will you need to adapt client code to each of the proprietary interfaces from these multiple vendors. Unlike a de facto standard where typically one vendor has change control over the interface, and everyone else has to reverse engineer the inner workings of it, CIMI is a de jure standard that is under change control of a standards body. One reason the standard took two years to create is that we factored in use cases, requirements and contributed APIs from multiple vendors. These vendors have products shipping today and as a result CIMI has a strong foundation in real world experience. What does CIMI allow? CIMI is both a model for the resources (computing, storage networking) in the cloud as well as a RESTful protocol binding to HTTP. This means that to create a Machine (guest VM) for example, the client creates a “document” that represents the Machine resource and sends it to the server using HTTP. CIMI allows the resources to be encoded in either JavaScript Object Notation (JSON) or the eXentsible Markup Language (XML). CIMI provides a model for the resources that can be mapped to any existing cloud infrastructure offering on the market. There are some features in CIMI that may not be supported by every cloud, but CIMI also supports the discovery of which features are implemented. This means that you can still have a client that works across multiple clouds and is able to take full advantage of the features in each of them. Isn’t it too early for a standard? A key feature of a successful standard is that it allows for compatible extensions to occur within the core framework of the interface itself. CIMI’s feature discovery (through metadata) is used to convey to the client that additional features that may be vendor specific have been implemented. As multiple vendors implement such features, they become candidates to add the future versions of CIMI. Thus innovation can continue in the cloud space without being slowed down by a lowest common denominator type of specification. Since CIMI was developed in the open by dozens of stakeholders who are already implementing infrastructure clouds, I expect to CIMI being adopted by these same companies and others over the next year or two. Cloud Customers who can see the benefit of this standard should start to ask their cloud vendors to show a CIMI implementation in their roadmap.  For more information on CIMI and the DMTF's other cloud efforts, go to: http://dmtf.org/cloud

  Read the article

• Homepage issue on Google [closed]

  - by nico

  We have recently updated our website www.blinds4uk.co.uk with a new homepage containing additional features and more on page content but since then we have lost primary keyword positions and the home page has disappeared completely. The only time it appears is for an exact search ‘blinds4uk’. Today I took snippets of 'unique content' from the homepage and put this into the 'google search' but our homepage was nowhere to be found. When I did the same in ‘Yahoo’ the homepage came up. Are we missing something? We ranked in the top 4 for primary kw terms 'blinds uk' & 'uk blinds' but now we don’t show anywhere for these terms. Our homepage has never ranked well for the primary kw 'blinds' yet our internal pages rank very well with many pages on page 1 of google uk. We employed an SEO firm for 9 months to help us establish issues with the homepage but they never could, so we got rid. We have been trying to get to the root cause of why the homepage ranks so poorly for a number of years and only yesterday we established that we had the meta tag directly below the tag and our title & meta description were further down the page; we have today corrected. Not sure what effect this would have on the way Google reads the homepage but we are trying everything to try and get the homepage ranking fro those primary kw's. Our current developers & ex SEO guys are all part of the same company and cannot pin-point anything other than saying carryon with their SEO team because it will take time but just comes across as a milking exercise. Another thing which I have found very strange is the data from our 'traffic audience'. We are a UK based website yet our traffic stats were showing as;- UK 36.6%, Denmark 35.8% and India 27.6%. – don’t make sense to me! Is there anybody out there that could simply point us in the right direction to the problem(s), so we can fix once and for all? Could there be anything within the code that is causing the home page not to display within google for our primary kw's terms such as blinds, window blinds etc. I would appreciate any advice at all that may help us in our quest to sort this homepage issue once and for all

  Read the article

• Data Source Use of Oracle Edition Based Redefinition (EBR)

  - by Steve Felts

  Edition-based redefinition is a new feature in the 11gR2 release of the Oracle database. It enables you to upgrade the database component of an application while it is in use, thereby minimizing or eliminating down time. It works by allowing for a pre-upgrade and post-upgrade view of the data to exist at the same time, providing a hot upgrade capability. You can then specify which view you want for a particular session.  See the Oracle Database Advanced Application Developer's Guide for further information. There is also a good white paper at Edition Based Definition. Using this feature of the Oracle database does not require any new WebLogic Server functionality. It is set for each connection in the pool automatically by simply specifying SQL ALTER SESSION SET EDITION = edition_name in the Init SQL parameter in the data source configuration. This can be configured either via the console or via WLST (setInitSQL on the JDBCConnectionPoolParams). This SQL statement is executed for each newly created physical database connection.Note that we are assuming that a data source references only one edition of the database. To make use of this feature, you would have an earlier version of the application with a data source that references the earlier EDITION and a later version of the application with a data source that references the later EDITION.   Once you start talking about multiple versions of a WLS application, you should be using the WLS "side-by-side" or "versioned" deployment feature.  See Developing Applications for Production Redeployment for more information.  By combining Oracle database EBR and WLS versioned deployment, the application can be failed over with no downtime, making the combination of features more powerful than either independently. There is a catch - you need to be running with a versioned database and a versioned application initially so then you can switch versions.  The recommended way to version a WLS application is to simply add the "Weblogic-Application-Version" property in the MANIFEST.MF file(you can also specify it at deployment time). The recommended way to configure the data source is to use a packaged data source descriptor that's stored in the ear or war so that everything is self-contained.  There are some restrictions.  You can't use a packaged data source with Logging Last Resource (LLR) - you need to use a system resource.  You can't use an application-scoped packaged data source with EmulateTwoPhaseCommit for the global-transactions-protocol with a versioned application - use a global scope.  See Configuring JDBC Application Modules for Deployment for more details. There's one known problem - it doesn't work correctly with an XA data source (patch available with bug 14075837).

  Read the article

• How to make sprint planning fun

  - by Jacob Spire

  Not only are our sprint planning meetings not fun, they're downright dreadful. The meetings are tedious, and boring, and take forever (a day, but it feels like a lot longer). The developers complain about it, and dread upcoming plannings. Our routine is pretty standard (user story inserted into sprint backlog by priority story is taken apart to tasks tasks are estimated in hours repeat), and I can't figure out what we're doing wrong. How can we make the meetings more enjoyable? ... Some more details, in response to requests for more information: Why are the backlog items not inserted and prioritized before sprint kickoff? User stories are indeed prioritized; we have no idea how long they'll take until we break them down into tasks! From the (excellent) answers here, I see that maybe we shouldn't estimate tasks at all, only the user stories. The reason we estimate tasks (and not stories) is because we've been getting story-estimates terribly wrong -- but I guess that's the subject for an altogether different question. Why are developers complaining? Meetings are long. Meetings are monotonous. Story after story, task after task, struggling (yes, struggling) to estimate how long it will take and what it involves. Estimating tasks makes user-story-estimation seem pointless. The longer the meeting, the less focus in the room. The less focused colleagues are, the longer the meeting takes. A recursive hate-spiral develops. We've considered splitting the meeting into two days in order to keep people focused, but the developers wouldn't hear of it. One day of planning is bad enough; now we'll have two?! Part of our problem is that we go into very small detail (in order to get more accurate estimations). But when we estimate roughly, we go way off the mark! To sum up the question: What are we doing wrong? What additional ways are there to make the meeting generally more enjoyable?

  Read the article

< Previous Page | 491 492 493 494 495 496 497 498 499 500 501 502  | Next Page >