Search Results

Search found 18677 results on 748 pages for 'current'.

Page 502/748 | < Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >

• GlassFish Back from Devoxx 2011 Mature Java EE 6 and EE 7 well on its way

  - by alexismp

  I'm back from my 8th (!) Devoxx conference (I don't think I've missed one since 2004) and this conference keeps delivering on the promise of a Java developer paradise week. GlassFish was covered in many different ways and I was not involved in a good number of them which can only be a good sign! Several folks asked me when my Java EE 6 session with Antonio Goncalves was scheduled (we've been covering this for the past two years in University sessions, hands-on labs and regular sessions). It turns out we didn't team up this year (Antonio was crazy busy preparing for Devoxx France) and I had a regular GlassFish session. Instead, this year, Bert Ertman and Paul Bakker covered the 3-hour Java EE 6 University session ("Duke’s Duct Tape Adventures") on the very first day (using GlassFish) with great success it seems. The Java EE 6 lab was also a hit with a full room of folks covering a lot of technical ground in 2.5 hours (with GlassFish of course). GlassFish was also mentioned during Cameron Purdy's keynote (pretty natural even if that surprised a number of folks that had not been closely following GlassFish) but also in Stephan Janssen's Keynote as the engine powering Parleys.com. In fact Stephan was a speaker in the GlassFish session describing how they went from a single-instance Tomcat setup to a clustered GlassFish + MQ environment. Also in the session was Johan Vos (of Mollom fame, along other things). Both of these customer testimonials were made possible because GlassFish has been delivering full Java EE 6 implementations for almost two years now which is plenty of time to see serious production deployments on it. The Java EE Gathering (BOF) was very well attended and very lively with many spec leads participating and discussing progress and also pain points with folks in the room. Thanks to all those attending this session, a good number of RFE's, and priority points came out of this. While this wasn't a GlassFish session by any means, it's great to have the current RESTful Admin and upcoming Java EE 7 planned features be a satisfactory answer to some of the requests from the attendance. Last but certainly not least, the GlassFish team is busy with Java EE 7 and version 4 of the product. This was discussed and shown during the Java EE keynote and in greater details in Jerome Dochez' session. If any indication, the tweets on his demo (virtualization, provisioning, etc...) were very encouraging. Java EE 6 adoption is doing great and GlassFish, being a production-quality reference implementation, is one of the first to benefit from this. And with GlassFish 4.0, we're looking at increasing the product and community adoption by offering a pragmatic technical solution to Java EE PaaS deployments. Stay tuned ! (the impatient in you is encouraged to grab a 4.0 build and provide feedback).

  Read the article

• Changing Focus on my Blog

  - by D'Arcy Lussier

  I try to limit these types of blog posts – the ones where I communicate some change as if I have a loyal subscriber base that will be somehow affected. Still, I think its of worth if for nothing else than to document for myself an acknowledgement that my career is evolving. For the last who knows how long, I’ve had this as my banner: It’s funny how technology focuses change over time. 3.5 – 4 years ago I was wanting to immerse myself in BizTalk. Then I shifted, focussing on Silverlight. I even started a short-lived Silverlight user group here in Winnipeg that had, IMO, one of the *best* UG logos ever (do a Google search for the old school Winnipeg Jets logo if you don’t catch the reference)… And even how I identified myself – as a Developer – isn’t really accurate anymore as I’ve shifted more into an architect/analyst role at Online Business Systems as well as getting much more involved in business development. So I’m switching the focus of this blog a bit. Nothing too great, but you’ll find my posts aren’t necessarily tied to a technology or platform. Instead I’ll be focussing on current passions and interests. Solution Architecture Before a line of code is written, a solution is envisioned. The process of performing solution analysis and architecture is an intriguing process that encompasses negotiation and interpersonal skills as much as technical knowledge. Business & Entrepreneurship Creating things, building things, and working with others – business is fascinating and exciting! Entrepreneurship, and intrapreneurship, are growing trends that I’ve been exploring over the last few years through my conference (www.prairiedevcon.com) and within Online. Microsoft At Online one of my roles is “Microsoft Practice Lead” and my entire career has been built around the Microsoft stack of technologies. That focus won’t change here on my blog, and there’s tonnes of exciting new products and technologies coming out of Redmond. Adoption This is a very personal subject that’s extremely close to my heart. I’m not talking about technology adoption, I’m talking about human adoption. Almost three years ago we adopted our first daughter, Sadie, and two years ago we adopted our second daughter, Skylar; an amazing new chapter in my life as I became a “parent”. Adoption is very much misunderstood, and many people have questions about it. Hopefully I can shed some light into our experiences and provide some guidance for those that are looking into it. So come along with me as I start chronicling the next phase of my career and life.

  Read the article

• Should I be using a JavaScript SPA designed when security is important

  - by ryanzec

  I asked something kind of similar on stackoverflow with a particular piece of code however I want to try to ask this in a broader sense. So I have this web application that I have started to write in backbone using a Single Page Architecture (SPA) however I am starting to second guess myself because of security. Now we are not storing and sending credit card information or anything like that through this web application but we are storing sensitive information that people are uploading to us and will have the ability to re-download too. The obviously security concern that I have with JavaScript is that you can't trust anything that comes from JavaScript however in a Backbone SPA application, everything is being sent through JavaScript. There are two security features that I will have to build in JavaScript; permissions and authentication. The authentication piece is just me override the Backbone.Router.prototype.navigate method to check the fragment it is trying to load and if the JavaScript application.session.loggedIn is not set to true (and they are not viewing a none authenticated page), they are redirected to the login page automatically. The user could easily modify application.session.loggedIn to equal true (or modify Backbone.Router.prototype.navigate method) but then they would also have to not so easily dynamically embedded a link into the page (or modify a current one) that has the proper classes, data-* attributes, and href values to then load a page that should only be loaded when they user has logged in (and has the permissions). So I have an acl object that deals with the permissions stuff. All someone would have to do to view pages or parts of pages they should not be able to is to call acl.addPermission(resource, permission) with the proper permissions or modify the acl.hasPermission() to always return true and then navigate away and then back to the page. Now certain things is EMCAScript 5 like Object.seal() or Object.freeze() would help with some of this however we have to support IE 8 which does not support those pieces of functionality. Now the REST API also performs security checks on every request so technically even if they are able to see parts of the interface that they should not be able to, they still should not be able to actually affect any data. The main benefits for me in developing a JavaScript SPA application is that the application is a lot more responsive since it is only transferring the minimum amount of JSON data for the requested action and performing the minimum amount of work too. There are also other things that I think are beneficial like you are going to have to develop an API for the data (which is good if you want expand your application to different platforms/technologies) or their is more of a separation between front-end and back-end however if security is a concern, it is really wise to go down the road of a JavaScript SPA application for the front-end?

  Read the article

• Using Dependency Walker

  - by Valter Minute

  Dependency Walker is a very useful tool that can be used to find dependencies of a Portable Executable module. The PE format is used also on Windows CE and this means that Dependency Walker can be used to analyze also Windows CE/Windows Embedded Compact module. On Win32 it can be used also to monitor modules loaded by an application during runtime, this feature is not supported on CE. You can download dependency walker for free here: http://dependencywalker.com/. To analyze the dependencies of a Windows CE/Windows Embedded Compact 7 module you can just open it using Dependency Walker. If you want to check if a specific module can run on a Windows CE/Windows Compact 7 OS Image you can copy the executable in the same directory that contains your OS binaries (FLATRELEASEDIR). In this way Dependency Walker will highlight missing dlls or missing entry points inside existing dlls. Let’s do a quick sample. You need to check if myapp.exe (an application from a third party) can run on an image generated with your Test01 OSDesign. Copy Myapp.exe to the flat release directory of your OS Design. Launch depends.exe and use the File\Open option of its main menu to open the application executable file you just copied. You may receive an error if some of the modules required by your applications are missing. Before you analyze the module dependencies is important to configure Dependency Walker to check DLL in the same folder where your application file is stored. This is needed because some Windows CE DLLs have the same name of Win32 system DLLs but different entry points. To configure the DLL search path select “Options\Configure Module Search Order…” from Depenency Walker main menu. Select “The application directory” from the “Current Search Order” list, select it, and move it to the top of the list using the “Move Up” button. The system will ask to refresh the window contents to reflect your configuration change, click on “Yes” to proceed. Now you can inspect myapp.exe dependencies. Some DLLs are missing (XAMLRUNTIME.DLL and TILEENGINE.DLL) and OLE32.DLL exists but does not export the “CoInitialize” entry point that is required by myapp.exe. The bad news is that MyApp.exe will not run on your OS Image, the good news is that now you know what’s missing and you can add the required modules to your OS Design and fix the problem!

  Read the article

• How to bill a client for frequently-interrupted time

  - by Greg

  I find that when I'm working on hourly-billable projects (in particular, those that are research/design/architecture-oriented as opposed to straight coding) that I'm easily distracted by any number of things (email, grab a drink (loss of focus, but nature happens), link off the webpage I was reading, wandering mind (easy when the job calls for a lot of thinking), etc.) This results in very fragmented time, far too incremental IMO to accurately track with a timeclock, and some time very gray. I frequently end up billing for only some fraction of the elapsed time I spent in order to feel fair, but sometimes it takes a really long time to put in an 8-hour day. By contrast, when I've worked for salary I've not worried about whether I'm actively working at any given minute, I just get the job done, and I've never had anything but stellar reviews/feedback from past salaried employers, so I think I get the job done well. I personally believe in an 80/20 cycle: I get 80% of my work done during an inspired 20% of my time. But I have to screw around the other 80% of the time in order to get that first 20%. So the question: what billing/time-tracking policy can I adopt in order to be fair to my hourly customers without having to write off my own less-productive 80% that a salaried employer is willing to overlook in light of the complete package? Note: This question is not about how to be more productive or focused. It's about how to work around whatever salient limitations that I have in a way that's both fair to me and to my customers. Update: A little clarification (to pre-emptively stop some righteous indignation): I currently have a half dozen different project/client groups. It's not a great situation and I'm working at reducing it down to two, but that's my current reality. It's very easy to get off on a thread related to a different project than the one I'm clocking, and I'm not always conscious of it at the time. [I did not intend the question to mean that I was off playing games or making personal calls, etc., and have adjusted wording above to be clearer. Most of the time. I am only human, and sometimes the mind does force you to take a break! :-)]

  Read the article

• Ubuntu 14.04 Failed to load module udlfb

  - by jar276705

  DisplayLink doesn't load and run. The adapter is recognized and /dev/FB1 is created. USB bus info: Bus 001 Device 006: ID 17e9:0198 DisplayLink Xorg.0.log: X.Org X Server 1.15.1 Release Date: 2014-04-13 [ 44708.386] X Protocol Version 11, Revision 0 [ 44708.389] Build Operating System: Linux 3.2.0-37-generic i686 Ubuntu [ 44708.392] Current Operating System: Linux rrl 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 [ 44708.392] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-24-generic root=UUID=6b719a77-29e0-4668-8f16-57d0d3a73a3f ro quiet splash vt.handoff=7 [ 44708.399] Build Date: 16 April 2014 01:40:08PM [ 44708.402] xorg-server 2:1.15.1-0ubuntu2 (For technical support please see http://www.ubuntu.com/support) [ 44708.405] Current version of pixman: 0.30.2 [ 44708.412] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 44708.412] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 44708.427] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 1 09:38:27 2014 [ 44708.431] (==) Using config file: "/etc/X11/xorg.conf" [ 44708.434] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 44708.435] (==) ServerLayout "X.org Configured" [ 44708.435] (**) |-->Screen "DisplayLinkScreen" (0) [ 44708.435] (**) | |-->Monitor "DisplayLinkMonitor" [ 44708.435] (**) | |-->Device "DisplayLinkDevice" [ 44708.435] (**) |-->Screen "Screen0" (1) [ 44708.435] (**) | |-->Monitor "Monitor0" [ 44708.435] (**) | |-->Device "Card0" [ 44708.435] (**) |-->Input Device "Mouse0" [ 44708.435] (**) |-->Input Device "Keyboard0" [ 44708.435] (==) Automatically adding devices [ 44708.435] (==) Automatically enabling devices [ 44708.435] (==) Automatically adding GPU devices [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist. [ 44708.435] Entry deleted from font path. [ 44708.435] (**) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins, /usr/share/fonts/X11/misc, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, built-ins [ 44708.435] (**) ModulePath set to "/usr/lib/xorg/modules" [ 44708.435] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled. [ 44708.435] (WW) Disabling Mouse0 [ 44708.435] (WW) Disabling Keyboard0 [ 44708.435] (II) Loader magic: 0xb77106c0 [ 44708.435] (II) Module ABI versions: [ 44708.435] X.Org ANSI C Emulation: 0.4 [ 44708.435] X.Org Video Driver: 15.0 [ 44708.435] X.Org XInput driver : 20.0 [ 44708.435] X.Org Server Extension : 8.0 [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card0) [ 44708.436] (II) xfree86: Adding drm device (/dev/dri/card1) [ 44708.437] (--) PCI:*(0:1:5:0) 1002:9616:105b:0e26 rev 0, Mem @ 0xf0000000/134217728, 0xfeae0000/65536, 0xfe900000/1048576, I/O @ 0x0000b000/256 [ 44708.441] Initializing built-in extension Generic Event Extension [ 44708.444] Initializing built-in extension SHAPE [ 44708.448] Initializing built-in extension MIT-SHM [ 44708.452] Initializing built-in extension XInputExtension [ 44708.456] Initializing built-in extension XTEST [ 44708.460] Initializing built-in extension BIG-REQUESTS [ 44708.464] Initializing built-in extension SYNC [ 44708.468] Initializing built-in extension XKEYBOARD [ 44708.471] Initializing built-in extension XC-MISC [ 44708.475] Initializing built-in extension SECURITY [ 44708.479] Initializing built-in extension XINERAMA [ 44708.483] Initializing built-in extension XFIXES [ 44708.487] Initializing built-in extension RENDER [ 44708.491] Initializing built-in extension RANDR [ 44708.494] Initializing built-in extension COMPOSITE [ 44708.498] Initializing built-in extension DAMAGE [ 44708.502] Initializing built-in extension MIT-SCREEN-SAVER [ 44708.506] Initializing built-in extension DOUBLE-BUFFER [ 44708.510] Initializing built-in extension RECORD [ 44708.513] Initializing built-in extension DPMS [ 44708.517] Initializing built-in extension Present [ 44708.521] Initializing built-in extension DRI3 [ 44708.525] Initializing built-in extension X-Resource [ 44708.528] Initializing built-in extension XVideo [ 44708.532] Initializing built-in extension XVideo-MotionCompensation [ 44708.535] Initializing built-in extension SELinux [ 44708.539] Initializing built-in extension XFree86-VidModeExtension [ 44708.542] Initializing built-in extension XFree86-DGA [ 44708.546] Initializing built-in extension XFree86-DRI [ 44708.549] Initializing built-in extension DRI2 [ 44708.549] (II) "glx" will be loaded. This was enabled by default and also specified in the config file. [ 44708.549] (WW) "xmir" is not to be loaded by default. Skipping. [ 44708.549] (II) LoadModule: "glx" [ 44708.549] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 44708.550] (II) Module glx: vendor="X.Org Foundation" [ 44708.550] compiled for 1.15.1, module version = 1.0.0 [ 44708.550] ABI class: X.Org Server Extension, version 8.0 [ 44708.550] (==) AIGLX enabled [ 44708.553] Loading extension GLX [ 44708.553] (II) LoadModule: "udlfb" [ 44708.554] (WW) Warning, couldn't open module udlfb [ 44708.554] (II) UnloadModule: "udlfb" [ 44708.554] (II) Unloading udlfb [ 44708.554] (EE) Failed to load module "udlfb" (module does not exist, 0) [ 44708.554] (II) LoadModule: "modesetting" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.554] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 0.8.1 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (==) Matched fglrx as autoconfigured driver 0 [ 44708.554] (==) Matched ati as autoconfigured driver 1 [ 44708.554] (==) Matched fglrx as autoconfigured driver 2 [ 44708.554] (==) Matched ati as autoconfigured driver 3 [ 44708.554] (==) Matched modesetting as autoconfigured driver 4 [ 44708.554] (==) Matched fbdev as autoconfigured driver 5 [ 44708.554] (==) Matched vesa as autoconfigured driver 6 [ 44708.554] (==) Assigned the driver to the xf86ConfigLayout [ 44708.554] (II) LoadModule: "fglrx" [ 44708.554] (WW) Warning, couldn't open module fglrx [ 44708.554] (II) UnloadModule: "fglrx" [ 44708.554] (II) Unloading fglrx [ 44708.554] (EE) Failed to load module "fglrx" (module does not exist, 0) [ 44708.554] (II) LoadModule: "ati" [ 44708.554] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so [ 44708.554] (II) Module ati: vendor="X.Org Foundation" [ 44708.554] compiled for 1.15.0, module version = 7.3.0 [ 44708.554] Module class: X.Org Video Driver [ 44708.554] ABI class: X.Org Video Driver, version 15.0 [ 44708.554] (II) LoadModule: "radeon" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so [ 44708.555] (II) Module radeon: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 7.3.0 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "modesetting" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so [ 44708.555] (II) Module modesetting: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.8.1 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) UnloadModule: "modesetting" [ 44708.555] (II) Unloading modesetting [ 44708.555] (II) Failed to load module "modesetting" (already loaded, 0) [ 44708.555] (II) LoadModule: "fbdev" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so [ 44708.555] (II) Module fbdev: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 0.4.4 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) LoadModule: "vesa" [ 44708.555] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so [ 44708.555] (II) Module vesa: vendor="X.Org Foundation" [ 44708.555] compiled for 1.15.0, module version = 2.3.3 [ 44708.555] Module class: X.Org Video Driver [ 44708.555] ABI class: X.Org Video Driver, version 15.0 [ 44708.555] (II) modesetting: Driver for Modesetting Kernel Drivers: kms [ 44708.555] (II) RADEON: Driver for ATI Radeon chipsets: [ 44708.560] (II) FBDEV: driver for framebuffer: fbdev [ 44708.560] (II) VESA: driver for VESA chipsets: vesa [ 44708.560] (--) using VT number 7 [ 44708.578] (II) modesetting(0): using drv /dev/dri/card0 [ 44708.578] (II) modesetting(G0): using drv /dev/dri/card1 [ 44708.578] (WW) Falling back to old probe method for fbdev [ 44708.578] (II) Loading sub module "fbdevhw" [ 44708.578] (II) LoadModule: "fbdevhw" [ 44708.578] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so [ 44708.578] (II) Module fbdevhw: vendor="X.Org Foundation" [ 44708.578] compiled for 1.15.1, module version = 0.0.2 [ 44708.578] ABI class: X.Org Video Driver, version 15.0 [ 44708.578] (WW) Falling back to old probe method for vesa [ 44708.578] (**) modesetting(0): Depth 16, (--) framebuffer bpp 16 [ 44708.578] (==) modesetting(0): RGB weight 565 [ 44708.578] (==) modesetting(0): Default visual is TrueColor [ 44708.578] (II) modesetting(0): ShadowFB: preferred YES, enabled YES [ 44708.608] (II) modesetting(0): Output VGA-0 using monitor section DisplayLinkMonitor [ 44708.610] (II) modesetting(0): Output DVI-0 has no monitor section [ 44708.640] (II) modesetting(0): EDID for output VGA-0 [ 44708.640] (II) modesetting(0): Manufacturer: ACR Model: 74 Serial#: 2483090993 [ 44708.640] (II) modesetting(0): Year: 2009 Week: 40 [ 44708.640] (II) modesetting(0): EDID Version: 1.3 [ 44708.640] (II) modesetting(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.640] (II) modesetting(0): Sync: Separate [ 44708.640] (II) modesetting(0): Max Image Size [cm]: horiz.: 53 vert.: 29 [ 44708.640] (II) modesetting(0): Gamma: 2.20 [ 44708.640] (II) modesetting(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.641] (II) modesetting(0): First detailed timing is preferred mode [ 44708.641] (II) modesetting(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609 [ 44708.641] (II) modesetting(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329 [ 44708.641] (II) modesetting(0): Supported established timings: [ 44708.641] (II) modesetting(0): 720x400@70Hz [ 44708.641] (II) modesetting(0): 640x480@60Hz [ 44708.641] (II) modesetting(0): 640x480@72Hz [ 44708.641] (II) modesetting(0): 640x480@75Hz [ 44708.641] (II) modesetting(0): 800x600@56Hz [ 44708.641] (II) modesetting(0): 800x600@60Hz [ 44708.641] (II) modesetting(0): 800x600@72Hz [ 44708.641] (II) modesetting(0): 800x600@75Hz [ 44708.641] (II) modesetting(0): 1024x768@60Hz [ 44708.641] (II) modesetting(0): 1024x768@70Hz [ 44708.641] (II) modesetting(0): 1024x768@75Hz [ 44708.641] (II) modesetting(0): 1280x1024@75Hz [ 44708.641] (II) modesetting(0): Manufacturer's mask: 0 [ 44708.641] (II) modesetting(0): Supported standard timings: [ 44708.641] (II) modesetting(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.641] (II) modesetting(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.641] (II) modesetting(0): #2: hsize: 1440 vsize 900 refresh: 60 vid: 149 [ 44708.641] (II) modesetting(0): #3: hsize: 1440 vsize 900 refresh: 75 vid: 3989 [ 44708.641] (II) modesetting(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553 [ 44708.641] (II) modesetting(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179 [ 44708.641] (II) modesetting(0): Supported detailed timing: [ 44708.641] (II) modesetting(0): clock: 138.5 MHz Image Size: 531 x 298 mm [ 44708.641] (II) modesetting(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0 [ 44708.641] (II) modesetting(0): v_active: 1080 v_sync: 1083 v_sync_end 1088 v_blanking: 1111 v_border: 0 [ 44708.641] (II) modesetting(0): Monitor name: H243H [ 44708.641] (II) modesetting(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz [ 44708.641] (II) modesetting(0): Serial No: LEW0C0044002 [ 44708.641] (II) modesetting(0): EDID (in hex): [ 44708.641] (II) modesetting(0): 00ffffffffffff000472740031f60094 [ 44708.641] (II) modesetting(0): 2813010368351d78ea6085a6564a9c25 [ 44708.641] (II) modesetting(0): 125054afcf008180714f9500950fa940 [ 44708.641] (II) modesetting(0): b300010101011a3680a070381f403020 [ 44708.641] (II) modesetting(0): 3500132a2100001a000000fc00483234 [ 44708.642] (II) modesetting(0): 33480a20202020202020000000fd0038 [ 44708.642] (II) modesetting(0): 4c1f5312000a202020202020000000ff [ 44708.642] (II) modesetting(0): 004c45573043303034343030320a003c [ 44708.642] (II) modesetting(0): Printing probed modes for output VGA-0 [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz UeP) [ 44708.642] (II) modesetting(0): Modeline "1920x1080"x59.9 138.50 1920 1968 2000 2080 1080 1083 1088 1111 +hsync -vsync (66.6 kHz eP) [ 44708.642] (II) modesetting(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.642] (II) modesetting(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.642] (II) modesetting(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.645] (II) modesetting(0): EDID for output DVI-0 [ 44708.645] (II) modesetting(0): Output VGA-0 connected [ 44708.645] (II) modesetting(0): Output DVI-0 disconnected [ 44708.645] (II) modesetting(0): Using user preference for initial modes [ 44708.645] (II) modesetting(0): Output VGA-0 using initial mode 1280x1024 [ 44708.645] (II) modesetting(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.645] (==) modesetting(0): DPI set to (96, 96) [ 44708.645] (II) Loading sub module "fb" [ 44708.645] (II) LoadModule: "fb" [ 44708.645] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.645] (II) Module fb: vendor="X.Org Foundation" [ 44708.645] compiled for 1.15.1, module version = 1.0.0 [ 44708.645] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.645] (II) Loading sub module "shadow" [ 44708.645] (II) LoadModule: "shadow" [ 44708.646] (II) Loading /usr/lib/xorg/modules/libshadow.so [ 44708.646] (II) Module shadow: vendor="X.Org Foundation" [ 44708.646] compiled for 1.15.1, module version = 1.1.0 [ 44708.646] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.646] (**) modesetting(G0): Depth 16, (--) framebuffer bpp 16 [ 44708.646] (==) modesetting(G0): RGB weight 565 [ 44708.646] (==) modesetting(G0): Default visual is TrueColor [ 44708.646] (II) modesetting(G0): ShadowFB: preferred NO, enabled NO [ 44708.727] (II) modesetting(G0): Output DVI-1-0 using monitor section DisplayLinkMonitor [ 44708.808] (II) modesetting(G0): EDID for output DVI-1-0 [ 44708.808] (II) modesetting(G0): Manufacturer: WDE Model: 1702 Serial#: 0 [ 44708.808] (II) modesetting(G0): Year: 2005 Week: 14 [ 44708.808] (II) modesetting(G0): EDID Version: 1.3 [ 44708.808] (II) modesetting(G0): Analog Display Input, Input Voltage Level: 0.700/0.700 V [ 44708.808] (II) modesetting(G0): Sync: Separate [ 44708.808] (II) modesetting(G0): Max Image Size [cm]: horiz.: 34 vert.: 27 [ 44708.808] (II) modesetting(G0): Gamma: 2.20 [ 44708.808] (II) modesetting(G0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display [ 44708.808] (II) modesetting(G0): Default color space is primary color space [ 44708.808] (II) modesetting(G0): First detailed timing is preferred mode [ 44708.808] (II) modesetting(G0): GTF timings supported [ 44708.808] (II) modesetting(G0): redX: 0.643 redY: 0.352 greenX: 0.283 greenY: 0.608 [ 44708.808] (II) modesetting(G0): blueX: 0.147 blueY: 0.102 whiteX: 0.313 whiteY: 0.329 [ 44708.808] (II) modesetting(G0): Supported established timings: [ 44708.808] (II) modesetting(G0): 720x400@70Hz [ 44708.808] (II) modesetting(G0): 640x480@60Hz [ 44708.808] (II) modesetting(G0): 640x480@67Hz [ 44708.808] (II) modesetting(G0): 640x480@72Hz [ 44708.808] (II) modesetting(G0): 640x480@75Hz [ 44708.808] (II) modesetting(G0): 800x600@56Hz [ 44708.808] (II) modesetting(G0): 800x600@60Hz [ 44708.808] (II) modesetting(G0): 800x600@72Hz [ 44708.808] (II) modesetting(G0): 800x600@75Hz [ 44708.808] (II) modesetting(G0): 832x624@75Hz [ 44708.808] (II) modesetting(G0): 1024x768@60Hz [ 44708.808] (II) modesetting(G0): 1024x768@70Hz [ 44708.808] (II) modesetting(G0): 1024x768@75Hz [ 44708.809] (II) modesetting(G0): 1280x1024@75Hz [ 44708.809] (II) modesetting(G0): Manufacturer's mask: 0 [ 44708.809] (II) modesetting(G0): Supported standard timings: [ 44708.809] (II) modesetting(G0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 [ 44708.809] (II) modesetting(G0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337 [ 44708.809] (II) modesetting(G0): Supported detailed timing: [ 44708.809] (II) modesetting(G0): clock: 108.0 MHz Image Size: 338 x 270 mm [ 44708.809] (II) modesetting(G0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 [ 44708.809] (II) modesetting(G0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 [ 44708.809] (II) modesetting(G0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz [ 44708.809] (II) modesetting(G0): Monitor name: WDE LCM-17v2 [ 44708.809] (II) modesetting(G0): Serial No: 0 [ 44708.809] (II) modesetting(G0): EDID (in hex): [ 44708.809] (II) modesetting(G0): 00ffffffffffff005c85021700000000 [ 44708.809] (II) modesetting(G0): 0e0f010368221b78ef8bc5a45a489b25 [ 44708.809] (II) modesetting(G0): 1a5054bfef008180714f010101010101 [ 44708.809] (II) modesetting(G0): 010101010101302a009851002a403070 [ 44708.809] (II) modesetting(G0): 1300520e1100001e000000fd00324b1e [ 44708.809] (II) modesetting(G0): 520e000a202020202020000000fc0057 [ 44708.809] (II) modesetting(G0): 4445204c434d2d313776320a000000ff [ 44708.809] (II) modesetting(G0): 00300a202020202020202020202000e7 [ 44708.809] (II) modesetting(G0): Printing probed modes for output DVI-1-0 [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz UeP) [ 44708.809] (II) modesetting(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e) [ 44708.809] (II) modesetting(G0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz) [ 44708.810] (II) modesetting(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 44708.810] (II) modesetting(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 44708.810] (==) modesetting(G0): DPI set to (96, 96) [ 44708.810] (II) Loading sub module "fb" [ 44708.810] (II) LoadModule: "fb" [ 44708.810] (II) Loading /usr/lib/xorg/modules/libfb.so [ 44708.810] (II) Module fb: vendor="X.Org Foundation" [ 44708.810] compiled for 1.15.1, module version = 1.0.0 [ 44708.811] ABI class: X.Org ANSI C Emulation, version 0.4 [ 44708.811] (II) UnloadModule: "radeon" [ 44708.811] (II) Unloading radeon [ 44708.811] (II) UnloadModule: "fbdev" [ 44708.811] (II) Unloading fbdev [ 44708.811] (II) UnloadSubModule: "fbdevhw" [ 44708.811] (II) Unloading fbdevhw [ 44708.811] (II) UnloadModule: "vesa" [ 44708.811] (II) Unloading vesa [ 44708.811] (==) modesetting(G0): Backing store enabled [ 44708.811] (==) modesetting(G0): Silken mouse enabled [ 44708.812] (II) modesetting(G0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(G0): DPMS enabled [ 44708.812] (WW) modesetting(G0): Option "fbdev" is not used [ 44708.812] (==) modesetting(0): Backing store enabled [ 44708.812] (==) modesetting(0): Silken mouse enabled [ 44708.812] (II) modesetting(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 44708.812] (==) modesetting(0): DPMS enabled [ 44708.812] (WW) modesetting(0): Option "fbdev" is not used [ 44708.856] (--) RandR disabled [ 44708.867] (II) SELinux: Disabled on system [ 44708.868] (II) AIGLX: Screen 0 is not DRI2 capable [ 44708.868] (EE) AIGLX: reverting to software rendering [ 44708.878] (II) AIGLX: Loaded and initialized swrast [ 44708.878] (II) GLX: Initialized DRISWRAST GL provider for screen 0 [ 44708.879] (II) modesetting(G0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Damage tracking initialized [ 44708.879] (II) modesetting(0): Setting screen physical size to 338 x 270 [ 44708.900] (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 44708.918] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 44708.918] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.918] (II) LoadModule: "evdev" [ 44708.918] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 44708.918] (II) Module evdev: vendor="X.Org Foundation" [ 44708.918] compiled for 1.15.0, module version = 2.8.2 [ 44708.918] Module class: X.Org XInput Driver [ 44708.918] ABI class: X.Org XInput driver, version 20.0 [ 44708.918] (II) Using input driver 'evdev' for 'Power Button' [ 44708.918] (**) Power Button: always reports core events [ 44708.918] (**) evdev: Power Button: Device: "/dev/input/event1" [ 44708.918] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.918] (--) evdev: Power Button: Found keys [ 44708.918] (II) evdev: Power Button: Configuring as keyboard [ 44708.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 44708.918] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 44708.918] (**) Option "xkb_rules" "evdev" [ 44708.918] (**) Option "xkb_model" "pc105" [ 44708.918] (**) Option "xkb_layout" "us" [ 44708.919] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 44708.919] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 44708.919] (II) Using input driver 'evdev' for 'Power Button' [ 44708.919] (**) Power Button: always reports core events [ 44708.919] (**) evdev: Power Button: Device: "/dev/input/event0" [ 44708.919] (--) evdev: Power Button: Vendor 0 Product 0x1 [ 44708.919] (--) evdev: Power Button: Found keys [ 44708.919] (II) evdev: Power Button: Configuring as keyboard [ 44708.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0" Is there anything I can do to fix this problem.

  Read the article

• Design considerations on JSON schema for scalars with a consistent attachment property

  - by casperOne

  I'm trying to create a JSON schema for the results of doing statistical analysis based on disparate pieces of data. The current schema I have looks something like this: { // Basic key information. video : "http://www.youtube.com/watch?v=7uwfjpfK0jo", start : "00:00:00", end : null, // For results of analysis, to be populated: // *** This is where it gets interesting *** analysis : { game : { value: "Super Street Fighter 4: Arcade Edition Ver. 2012", confidence: 0.9725 } teams : [ { player : { value : "Desk", confidence: 0.95, } characters : [ { value : "Hakan", confidence: 0.80 } ] } ] } } The issue is the tuples that are used to store a value and the confidence related to that value (i.e. { value : "some value", confidence : 0.85 }), populated after the results of the analysis. This leads to a creep of this tuple for every value. Take a fully-fleshed out value from the characters array: { name : { value : "Hakan", confidence: 0.80 } ultra : { value: 1, confidence: 0.90 } } As the structures that represent the values become more and more detailed (and more analysis is done on them to try and determine the confidence behind that analysis), the nesting of the tuples adds great deal of noise to the overall structure, considering that the final result (when verified) will be: { name : "Hakan", ultra : 1 } (And recall that this is just a nested value) In .NET (in which I'll be using to work with this data), I'd have a little helper like this: public class UnknownValue<T> { T Value { get; set; } double? Confidence { get; set; } } Which I'd then use like so: public class Character { public UnknownValue<Character> Name { get; set; } } While the same as the JSON representation in code, it doesn't have the same creep because I don't have to redefine the tuple every time and property accessors hide the appearance of creep. Of course, this is an apples-to-oranges comparison, the above is code while the JSON is data. Is there a more formalized/cleaner/best practice way of containing the creep of these tuples in JSON, or is the approach above an accepted approach for the type of data I'm trying to store (and I'm just perceiving it the wrong way)? Note, this is being represented in JSON because this will ultimately go in a document database (something like RavenDB or elasticsearch). I'm not concerned about being able to serialize into the object above, because I can always use data transfer objects to facilitate getting data into/out of my underlying data store.

  Read the article

• Security Issues with Single Page Apps

  - by Stephen.Walther

  Last week, I was asked to do a code review of a Single Page App built using the ASP.NET Web API, Durandal, and Knockout (good stuff!). In particular, I was asked to investigate whether there any special security issues associated with building a Single Page App which are not present in the case of a traditional server-side ASP.NET application. In this blog entry, I discuss two areas in which you need to exercise extra caution when building a Single Page App. I discuss how Single Page Apps are extra vulnerable to both Cross-Site Scripting (XSS) attacks and Cross-Site Request Forgery (CSRF) attacks. This goal of this blog post is NOT to persuade you to avoid writing Single Page Apps. I’m a big fan of Single Page Apps. Instead, the goal is to ensure that you are fully aware of some of the security issues related to Single Page Apps and ensure that you know how to guard against them. Cross-Site Scripting (XSS) Attacks According to WhiteHat Security, over 65% of public websites are open to XSS attacks. That’s bad. By taking advantage of XSS holes in a website, a hacker can steal your credit cards, passwords, or bank account information. Any website that redisplays untrusted information is open to XSS attacks. Let me give you a simple example. Imagine that you want to display the name of the current user on a page. To do this, you create the following server-side ASP.NET page located at http://MajorBank.com/SomePage.aspx: <%@Page Language="C#" %> <html> <head> <title>Some Page</title> </head> <body> Welcome <%= Request["username"] %> </body> </html> Nothing fancy here. Notice that the page displays the current username by using Request[“username”]. Using Request[“username”] displays the username regardless of whether the username is present in a cookie, a form field, or a query string variable. Unfortunately, by using Request[“username”] to redisplay untrusted information, you have now opened your website to XSS attacks. Here’s how. Imagine that an evil hacker creates the following link on another website (hackers.com): <a href="/SomePage.aspx?username=<script src=Evil.js></script>">Visit MajorBank</a> Notice that the link includes a query string variable named username and the value of the username variable is an HTML <SCRIPT> tag which points to a JavaScript file named Evil.js. When anyone clicks on the link, the <SCRIPT> tag will be injected into SomePage.aspx and the Evil.js script will be loaded and executed. What can a hacker do in the Evil.js script? Anything the hacker wants. For example, the hacker could display a popup dialog on the MajorBank.com site which asks the user to enter their password. The script could then post the password back to hackers.com and now the evil hacker has your secret password. ASP.NET Web Forms and ASP.NET MVC have two automatic safeguards against this type of attack: Request Validation and Automatic HTML Encoding. Protecting Coming In (Request Validation) In a server-side ASP.NET app, you are protected against the XSS attack described above by a feature named Request Validation. If you attempt to submit “potentially dangerous” content — such as a JavaScript <SCRIPT> tag — in a form field or query string variable then you get an exception. Unfortunately, Request Validation only applies to server-side apps. Request Validation does not help in the case of a Single Page App. In particular, the ASP.NET Web API does not pay attention to Request Validation. You can post any content you want – including <SCRIPT> tags – to an ASP.NET Web API action. For example, the following HTML page contains a form. When you submit the form, the form data is submitted to an ASP.NET Web API controller on the server using an Ajax request: <!DOCTYPE html> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title></title> </head> <body> <form data-bind="submit:submit"> <div> <label> User Name: <input data-bind="value:user.userName" /> </label> </div> <div> <label> Email: <input data-bind="value:user.email" /> </label> </div> <div> <input type="submit" value="Submit" /> </div> </form> <script src="Scripts/jquery-1.7.1.js"></script> <script src="Scripts/knockout-2.1.0.js"></script> <script> var viewModel = { user: { userName: ko.observable(), email: ko.observable() }, submit: function () { $.post("/api/users", ko.toJS(this.user)); } }; ko.applyBindings(viewModel); </script> </body> </html> The form above is using Knockout to bind the form fields to a view model. When you submit the form, the view model is submitted to an ASP.NET Web API action on the server. Here’s the server-side ASP.NET Web API controller and model class: public class UsersController : ApiController { public HttpResponseMessage Post(UserViewModel user) { var userName = user.UserName; return Request.CreateResponse(HttpStatusCode.OK); } } public class UserViewModel { public string UserName { get; set; } public string Email { get; set; } } If you submit the HTML form, you don’t get an error. The “potentially dangerous” content is passed to the server without any exception being thrown. In the screenshot below, you can see that I was able to post a username form field with the value “<script>alert(‘boo’)</script”. So what this means is that you do not get automatic Request Validation in the case of a Single Page App. You need to be extra careful in a Single Page App about ensuring that you do not display untrusted content because you don’t have the Request Validation safety net which you have in a traditional server-side ASP.NET app. Protecting Going Out (Automatic HTML Encoding) Server-side ASP.NET also protects you from XSS attacks when you render content. By default, all content rendered by the razor view engine is HTML encoded. For example, the following razor view displays the text “<b>Hello!</b>” instead of the text “Hello!” in bold: @{ var message = "<b>Hello!</b>"; } @message   If you don’t want to render content as HTML encoded in razor then you need to take the extra step of using the @Html.Raw() helper. In a Web Form page, if you use <%: %> instead of <%= %> then you get automatic HTML Encoding: <%@ Page Language="C#" %> <% var message = "<b>Hello!</b>"; %> <%: message %> This automatic HTML Encoding will prevent many types of XSS attacks. It prevents <script> tags from being rendered and only allows &lt;script&gt; tags to be rendered which are useless for executing JavaScript. (This automatic HTML encoding does not protect you from all forms of XSS attacks. For example, you can assign the value “javascript:alert(‘evil’)” to the Hyperlink control’s NavigateUrl property and execute the JavaScript). The situation with Knockout is more complicated. If you use the Knockout TEXT binding then you get HTML encoded content. On the other hand, if you use the HTML binding then you do not: <!-- This JavaScript DOES NOT execute --> <div data-bind="text:someProp"></div> <!-- This Javacript DOES execute --> <div data-bind="html:someProp"></div> <script src="Scripts/jquery-1.7.1.js"></script> <script src="Scripts/knockout-2.1.0.js"></script> <script> var viewModel = { someProp : "<script>alert('Evil!')<" + "/script>" }; ko.applyBindings(viewModel); </script>   So, in the page above, the DIV element which uses the TEXT binding is safe from XSS attacks. According to the Knockout documentation: “Since this binding sets your text value using a text node, it’s safe to set any string value without risking HTML or script injection.” Just like server-side HTML encoding, Knockout does not protect you from all types of XSS attacks. For example, there is nothing in Knockout which prevents you from binding JavaScript to a hyperlink like this: <a data-bind="attr:{href:homePageUrl}">Go</a> <script src="Scripts/jquery-1.7.1.min.js"></script> <script src="Scripts/knockout-2.1.0.js"></script> <script> var viewModel = { homePageUrl: "javascript:alert('evil!')" }; ko.applyBindings(viewModel); </script> In the page above, the value “javascript:alert(‘evil’)” is bound to the HREF attribute using Knockout. When you click the link, the JavaScript executes. Cross-Site Request Forgery (CSRF) Attacks Cross-Site Request Forgery (CSRF) attacks rely on the fact that a session cookie does not expire until you close your browser. In particular, if you visit and login to MajorBank.com and then you navigate to Hackers.com then you will still be authenticated against MajorBank.com even after you navigate to Hackers.com. Because MajorBank.com cannot tell whether a request is coming from MajorBank.com or Hackers.com, Hackers.com can submit requests to MajorBank.com pretending to be you. For example, Hackers.com can post an HTML form from Hackers.com to MajorBank.com and change your email address at MajorBank.com. Hackers.com can post a form to MajorBank.com using your authentication cookie. After your email address has been changed, by using a password reset page at MajorBank.com, a hacker can access your bank account. To prevent CSRF attacks, you need some mechanism for detecting whether a request is coming from a page loaded from your website or whether the request is coming from some other website. The recommended way of preventing Cross-Site Request Forgery attacks is to use the “Synchronizer Token Pattern” as described here: https://www.owasp.org/index.php/Cross-Site_Request_Forgery_%28CSRF%29_Prevention_Cheat_Sheet When using the Synchronizer Token Pattern, you include a hidden input field which contains a random token whenever you display an HTML form. When the user opens the form, you add a cookie to the user’s browser with the same random token. When the user posts the form, you verify that the hidden form token and the cookie token match. Preventing Cross-Site Request Forgery Attacks with ASP.NET MVC ASP.NET gives you a helper and an action filter which you can use to thwart Cross-Site Request Forgery attacks. For example, the following razor form for creating a product shows how you use the @Html.AntiForgeryToken() helper: @model MvcApplication2.Models.Product <h2>Create Product</h2> @using (Html.BeginForm()) { @Html.AntiForgeryToken(); <div> @Html.LabelFor( p => p.Name, "Product Name:") @Html.TextBoxFor( p => p.Name) </div> <div> @Html.LabelFor( p => p.Price, "Product Price:") @Html.TextBoxFor( p => p.Price) </div> <input type="submit" /> } The @Html.AntiForgeryToken() helper generates a random token and assigns a serialized version of the same random token to both a cookie and a hidden form field. (Actually, if you dive into the source code, the AntiForgeryToken() does something a little more complex because it takes advantage of a user’s identity when generating the token). Here’s what the hidden form field looks like: <input name=”__RequestVerificationToken” type=”hidden” value=”NqqZGAmlDHh6fPTNR_mti3nYGUDgpIkCiJHnEEL59S7FNToyyeSo7v4AfzF2i67Cv0qTB1TgmZcqiVtgdkW2NnXgEcBc-iBts0x6WAIShtM1″ /> And here’s what the cookie looks like using the Google Chrome developer toolbar: You use the [ValidateAntiForgeryToken] action filter on the controller action which is the recipient of the form post to validate that the token in the hidden form field matches the token in the cookie. If the tokens don’t match then validation fails and you can’t post the form: public ActionResult Create() { return View(); } [ValidateAntiForgeryToken] [HttpPost] public ActionResult Create(Product productToCreate) { if (ModelState.IsValid) { // save product to db return RedirectToAction("Index"); } return View(); } How does this all work? Let’s imagine that a hacker has copied the Create Product page from MajorBank.com to Hackers.com – the hacker grabs the HTML source and places it at Hackers.com. Now, imagine that the hacker trick you into submitting the Create Product form from Hackers.com to MajorBank.com. You’ll get the following exception: The Cross-Site Request Forgery attack is blocked because the anti-forgery token included in the Create Product form at Hackers.com won’t match the anti-forgery token stored in the cookie in your browser. The tokens were generated at different times for different users so the attack fails. Preventing Cross-Site Request Forgery Attacks with a Single Page App In a Single Page App, you can’t prevent Cross-Site Request Forgery attacks using the same method as a server-side ASP.NET MVC app. In a Single Page App, HTML forms are not generated on the server. Instead, in a Single Page App, forms are loaded dynamically in the browser. Phil Haack has a blog post on this topic where he discusses passing the anti-forgery token in an Ajax header instead of a hidden form field. He also describes how you can create a custom anti-forgery token attribute to compare the token in the Ajax header and the token in the cookie. See: http://haacked.com/archive/2011/10/10/preventing-csrf-with-ajax.aspx Also, take a look at Johan’s update to Phil Haack’s original post: http://johan.driessen.se/posts/Updated-Anti-XSRF-Validation-for-ASP.NET-MVC-4-RC (Other server frameworks such as Rails and Django do something similar. For example, Rails uses an X-CSRF-Token to prevent CSRF attacks which you generate on the server – see http://excid3.com/blog/rails-tip-2-include-csrf-token-with-every-ajax-request/#.UTFtgDDkvL8 ). For example, if you are creating a Durandal app, then you can use the following razor view for your one and only server-side page: @{ Layout = null; } <!DOCTYPE html> <html> <head> <title>Index</title> </head> <body> @Html.AntiForgeryToken() <div id="applicationHost"> Loading app.... </div> @Scripts.Render("~/scripts/vendor") <script type="text/javascript" src="~/App/durandal/amd/require.js" data-main="/App/main"></script> </body> </html> Notice that this page includes a call to @Html.AntiForgeryToken() to generate the anti-forgery token. Then, whenever you make an Ajax request in the Durandal app, you can retrieve the anti-forgery token from the razor view and pass the token as a header: var csrfToken = $("input[name='__RequestVerificationToken']").val(); $.ajax({ headers: { __RequestVerificationToken: csrfToken }, type: "POST", dataType: "json", contentType: 'application/json; charset=utf-8', url: "/api/products", data: JSON.stringify({ name: "Milk", price: 2.33 }), statusCode: { 200: function () { alert("Success!"); } } }); Use the following code to create an action filter which you can use to match the header and cookie tokens: using System.Linq; using System.Net.Http; using System.Web.Helpers; using System.Web.Http.Controllers; namespace MvcApplication2.Infrastructure { public class ValidateAjaxAntiForgeryToken : System.Web.Http.AuthorizeAttribute { protected override bool IsAuthorized(HttpActionContext actionContext) { var headerToken = actionContext .Request .Headers .GetValues("__RequestVerificationToken") .FirstOrDefault(); ; var cookieToken = actionContext .Request .Headers .GetCookies() .Select(c => c[AntiForgeryConfig.CookieName]) .FirstOrDefault(); // check for missing cookie or header if (cookieToken == null || headerToken == null) { return false; } // ensure that the cookie matches the header try { AntiForgery.Validate(cookieToken.Value, headerToken); } catch { return false; } return base.IsAuthorized(actionContext); } } } Notice that the action filter derives from the base AuthorizeAttribute. The ValidateAjaxAntiForgeryToken only works when the user is authenticated and it will not work for anonymous requests. Add the action filter to your ASP.NET Web API controller actions like this: [ValidateAjaxAntiForgeryToken] public HttpResponseMessage PostProduct(Product productToCreate) { // add product to db return Request.CreateResponse(HttpStatusCode.OK); } After you complete these steps, it won’t be possible for a hacker to pretend to be you at Hackers.com and submit a form to MajorBank.com. The header token used in the Ajax request won’t travel to Hackers.com. This approach works, but I am not entirely happy with it. The one thing that I don’t like about this approach is that it creates a hard dependency on using razor. Your single page in your Single Page App must be generated from a server-side razor view. A better solution would be to generate the anti-forgery token in JavaScript. Unfortunately, until all browsers support a way to generate cryptographically strong random numbers – for example, by supporting the window.crypto.getRandomValues() method — there is no good way to generate anti-forgery tokens in JavaScript. So, at least right now, the best solution for generating the tokens is the server-side solution with the (regrettable) dependency on razor. Conclusion The goal of this blog entry was to explore some ways in which you need to handle security differently in the case of a Single Page App than in the case of a traditional server app. In particular, I focused on how to prevent Cross-Site Scripting and Cross-Site Request Forgery attacks in the case of a Single Page App. I want to emphasize that I am not suggesting that Single Page Apps are inherently less secure than server-side apps. Whatever type of web application you build – regardless of whether it is a Single Page App, an ASP.NET MVC app, an ASP.NET Web Forms app, or a Rails app – you must constantly guard against security vulnerabilities.

  Read the article

• SQL SERVER – Monday Morning Puzzle – Query Returns Results Sometimes but Not Always

  - by pinaldave

  The amount of email I receive sometime it is impossible for me to answer every email. Nonetheless I try to answer pretty much every email I receive. However, quite often I receive such questions in email that I have no answer to them because either emails are not complete or they are out of my domain expertise. In recent times I received one email which had only one or two lines but indeed attracted my attention to it. The question was bit vague but it indeed made me think. The answer was not straightforward so I had to keep on writing the answer as I remember it. However, after writing the answer I do not feel satisfied. Let me put this question in front of you and see if we all can come up with a comprehensive answer. Question: I am beginner with SQL Server. I have one query, it sometime returns a result and sometime it does not return me the result. Where should I start looking for a solution and what kind of information I should send to you so you can help me with solving. I have no clue, please guide me. Well, if you read the question, it is indeed incomplete and it does not contain much of the information at all. I decided to help him and here is the answer, which I started to compose. Answer: As there are not much information in the original question, I am not confident what will solve your problem. However, here are the few things which you can try to look at and see if that solves your problem. Check parameter which is passed to the query. Is the parameter changing at various executions? Check connection string – is there some kind of logic around it? Do you have a non-deterministic component in your query logic? (In other words – does your result is based on current date time or any other time based function?) Are you facing time out while running your query? Is there any error in error log? What is the business logic in your query? Do you have all the valid permissions to all the objects used in the query? Are permissions changing or query accessing a different object in various executions? (Add your suggestions here) Meanwhile, have you ever faced this situation? If yes, do share your experience in the comment area. I will send a copy of my book SQL Server Interview Questions and Answers to one of the most interesting comment. The winner will be announced by next Monday.  Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Interview Questions and Answers, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Silverlight Cream for May 06, 2010 -- #857

  - by Dave Campbell

  In this Issue: Alan Beasley, Josh Twist, Mike Snow(-2-, -3-), John Papa(-2-), David Kelley, and David Anson(-2-). Shoutout: John Papa posted a question: Do You Want be on Silverlight TV? From SilverlightCream.com: ListBox Styling (Part 3 - Additional Templates) in Expression Blend & Silverlight Alan Beasley has part 3 of his ListBox styling tutorial in Expression Blend up... another great tutorial and all the code. Securing Your Silverlight Applications Josh Twist has a nice long post up on Securing your Silverlight apps... definitions, services, various forms of authentication. Silverlight Tip of the Day #13 – Silverlight Mobile Development Mike Snow has Tip of the Day #13 up and is discussing creating Silverlight apps for WP7. Silverlight Tip of the Day #14 – Dynamically Loading a Control from a DLL on a Server Mike Snow's Tip #14 is step-by-step instructions for loading a UserControl from a DLL. Silverlight Tip of the Day #15 – Setting Default Browse in Visual Studio Mike Snow's Tip #15 is actually a Visual Studio tip -- how to set what browser your Silverlight app will launch in. Silverlight TV 24: eBay’s Silverlight 4 Simple Lister Application Here we are with Silverlight TV Thursday again! ... John Papa is interviewing Dave Wolf talking about the eBay Simple Lister app. Digitally Signing a XAP Silverlight John Papa has a post up about Digitally signing a Silverlight XAP. He actually is posting an excerpt from the Silverlight 4 Whitepaper he posted... and he has a link to the Whitepaper so we can all read the whole thing too! Hacking Silverlight Code Browser David Kelley has a very cool code browser up to keep track of all the snippets he uses... and we can too... this is a tremendous resource... thanks David! Simple workarounds for a visual problem when toggling a ContextMenu MenuItem's IsEnabled property directly David Anson dug into a ContextMenu problem reported by a couple readers and found a way to duplicate the problem plus a workaround while you're waiting for the next Toolkit drop. Upgraded my Windows Phone 7 Charting example to go with the April Developer Tools Refresh David Anson also has a post up describing his path from the previous WP7 code to the current upgrading his charting code. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Future of Active FoxPro Pages - secured

  Finally some official news about Active FoxPro Pages, aka AFP. The German company BvL Bürosysteme Vertriebs GmbH bought all rights of Active FoxPro Pages from the insolvency stock. Being a former customer and intensive user of AFP since version 2.0 BvL has own interest in the continuation of AFP on current and future web servers. Together with their partners Christof Wollenhaupt (Foxpert Software Development & Consulting) and Jochen Kirstätter (IOS Indian Ocean Software Ltd) BvL will continue with development, support and marketing of AFP in the upcoming weeks. There will be an updated version of AFP, the relaunch of the website, re-enabling of activation server, re-establishment of support channel, and much more... Personally, I am relieved that this superb product made its way out of the dust of the past years. And of course, to be involved (again) in the development and support of Active FoxPro Pages gives me a big smile. Rest assured that there will be more articles on AFP soon! Here is the original announcement of 27th September 2010 from the online forum of German FoxPro Usergroup (dFPUG) - section Active FoxPro Pages: Liebe AFP Anwender, liebe FoxPro Gemeinde, nach den Insolvenzen der ProLib Software GmbH und der ProLib Tools GmbH gab es einige Verunsicherung über die Zukunft der Active FoxPro Pages. Wir können euch nun mitteilen, dass eine für alle Beteiligten positive Lösung gefunden wurde. Wir, die BvL Bürosysteme Vertriebs GmbH aus Berlin, haben sämtliche Rechte an der AFP aus der Insolvenzmasse vom Insolvenzverwalter abgekauft. Bereits 1987 wurde die BvL Bürosysteme Vertriebs GmbH gegründet und hat sich seit dem erfolgreich im Markt bewährt. Wir gehören auch schon seit Foxpro2.0 zur Foxpro-Gemeinde und auch mit der AFP2.0 haben wir unseren Einstieg in die AFP-Gemeinde vollzogen. Wir wollen die AFP nicht in irgendeine Schublade packen, sondern unser Ziel ist es, die AFP weiterzuentwickeln, speziell auch auf die kommenden Serverversionen. Unter der Homepage www.active-foxpro-pages.de wird es demnächst einen neuen Auftritt geben. An den Preisen soll sich nichts groß verändern, das Handbuch soll anständig aufgelegt werden und selbstverständlich soll der Support und die Weiterentwicklung eine große Aufmerksamkeit bekommen. Mit Christof Wollenhaupt und Jochen Kirstätter haben wir zwei Partner an Bord, die sich um den Support und die Weiterentwicklung kümmern werden. Christof Wollenhaupt wird maßgeblich und federführend an der Weiterentwicklung beteiligt sein. Über Christof Wollenhaupt können auch ab sofort Lizenzen gekauft werden, Christof Wollenhaupt ist für den Online-Vertrieb zuständig, der gerade aufgebaut wird. Sollte ein AFP Server aktiviert werden müssen, können sich alle bisherigen Lizenzinhaber auch direkt an Christof Wollenhaupt wenden. In den nächsten Wochen werden wir die AFP wieder auf Touren bringen. Eine aktuelle Version, eine neue Webseite, der Aktivierungsserver, ein Überblick über das leicht geänderte Lizensierungsmodell, und vieles mehr ist gerade in Arbeit. Die Zukunft und die Weiterentwicklung der AFP sind jetzt gesichert! Mit freundlichen Grüßen Ralph-Norman von Loesch Source: http://forum.dfpug.de/bodyframe.afp?msgid=728069

  Read the article

• fmod getWaveData() export to WAVE file help (C++)

  - by eddietree

  I am trying to export the current sound that is being played by the FMOD::System into a WAVE file by calling getWaveData(). I have the header of the wave file correct, and currently trying to write to the wave file each frame like so: const unsigned int samplesPerSec = 48000; const unsigned int fps = 60; const int numSamples = samplesPerSec / fps; float data[2][numSamples]; short conversion[numSamples*2]; m_fmodsys->getWaveData( &data[0][0], numSamples, 0 ); // left channel m_fmodsys->getWaveData( &data[1][0], numSamples, 1 ); // right channel int littleEndian = IsLittleEndian(); for ( int i = 0; i < numSamples; ++i ) { // left channel float coeff_left = data[0][i]; short val_left = (short)(coeff_left * 0x7FFF); // right channel float coeff_right = data[1][i]; short val_right = (short)(coeff_right * 0x7FFF); // handle endianness if ( !littleEndian ) { val_left = ((val_left & 0xff) << 8) | (val_left >> 8); val_right = ((val_right & 0xff) << 8) | (val_right >> 8); } conversion[i*2+0] = val_left; conversion[i*2+1] = val_right; } fwrite((void*)&conversion[0], sizeof(conversion[0]), numSamples*2, m_fh); m_dataLength += sizeof(conversion); Currently, the timing of the sound is correct, but the sample seems clipped way harshly. More specifically, I am outputting four beats in time. When I playback the wave-file, the beats timing is correct but it just sounds way fuzzy and clipped. Am I doing something wrong with my calculation? I am exporting in 16-bits, two channels. Thanks in advance! :) Reference (WAVE file format): http://www.sonicspot.com/guide/wavefiles.html

  Read the article

• BoundingBox created from mesh to origin, making it bigger

  - by Gunnar Södergren

  I'm working on a level-based survival game and I want to design my scenes in Maya and export them as a single model (with multiple meshes) into XNA. My problem is that when I try to create Bounding Boxes(for Collision purposes) for each of the meshes, the are calculated from origin to the far-end of the current mesh, so to speak. I'm thinking that it might have something to do with the position each mesh brings from Maya and that it's interpreted wrongly... or something. Here's the code for when I create the boxes: private static BoundingBox CreateBoundingBox(Model model, ModelMesh mesh) { Matrix[] boneTransforms = new Matrix[model.Bones.Count]; model.CopyAbsoluteBoneTransformsTo(boneTransforms); BoundingBox result = new BoundingBox(); foreach (ModelMeshPart meshPart in mesh.MeshParts) { BoundingBox? meshPartBoundingBox = GetBoundingBox(meshPart, boneTransforms[mesh.ParentBone.Index]); if (meshPartBoundingBox != null) result = BoundingBox.CreateMerged(result, meshPartBoundingBox.Value); } result = new BoundingBox(result.Min, result.Max); return result; } private static BoundingBox? GetBoundingBox(ModelMeshPart meshPart, Matrix transform) { if (meshPart.VertexBuffer == null) return null; Vector3[] positions = VertexElementExtractor.GetVertexElement(meshPart, VertexElementUsage.Position); if (positions == null) return null; Vector3[] transformedPositions = new Vector3[positions.Length]; Vector3.Transform(positions, ref transform, transformedPositions); for (int i = 0; i < transformedPositions.Length; i++) { Console.WriteLine(" " + transformedPositions[i]); } return BoundingBox.CreateFromPoints(transformedPositions); } public static class VertexElementExtractor { public static Vector3[] GetVertexElement(ModelMeshPart meshPart, VertexElementUsage usage) { VertexDeclaration vd = meshPart.VertexBuffer.VertexDeclaration; VertexElement[] elements = vd.GetVertexElements(); Func<VertexElement, bool> elementPredicate = ve => ve.VertexElementUsage == usage && ve.VertexElementFormat == VertexElementFormat.Vector3; if (!elements.Any(elementPredicate)) return null; VertexElement element = elements.First(elementPredicate); Vector3[] vertexData = new Vector3[meshPart.NumVertices]; meshPart.VertexBuffer.GetData((meshPart.VertexOffset * vd.VertexStride) + element.Offset, vertexData, 0, vertexData.Length, vd.VertexStride); return vertexData; } } Here's a link to the picture of the mesh(The model holds six meshes, but I'm only rendering one and it's bounding box to make it clearer: http://www.gsodergren.se/portfolio/wp-content/uploads/2011/10/Screen-shot-2011-10-24-at-1.16.37-AM.png The mesh that I'm refering to is the Cubelike one. The cylinder is a completely different model and not part of any bounding box calculation. I've double- (and tripple-)-checked that this mesh corresponds to this bounding box. Any thoughts on what I'm doing wrong?

  Read the article

• Windows Azure Use Case: High-Performance Computing (HPC)

  - by BuckWoody

  This is one in a series of posts on when and where to use a distributed architecture design in your organization's computing needs. You can find the main post here: http://blogs.msdn.com/b/buckwoody/archive/2011/01/18/windows-azure-and-sql-azure-use-cases.aspx  Description: High-Performance Computing (also called Technical Computing) at its most simplistic is a layout of computer workloads where a “head node” accepts work requests, and parses them out to “worker nodes'”. This is useful in cases such as scientific simulations, drug research, MatLab work and where other large compute loads are required. It’s not the immediate-result type computing many are used to; instead, a “job” or group of work requests is sent to a cluster of computers and the worker nodes work on individual parts of the calculations and return the work to the scheduler or head node for the requestor in a batch-request fashion. This is typical to the way that many mainframe computing use-cases work. You can use commodity-based computers to create an HPC Cluster, such as the Linux application called Beowulf, and Microsoft has a server product for HPC using standard computers, called the Windows Compute Cluster that you can read more about here. The issue with HPC (from any vendor) that some organization have is the amount of compute nodes they need. Having too many results in excess infrastructure, including computers, buildings, storage, heat and so on. Having too few means that the work is slower, and takes longer to return a result to the calling application. Unless there is a consistent level of work requested, predicting the number of nodes is problematic. Implementation: Recently, Microsoft announced an internal partnership between the HPC group (Now called the Technical Computing Group) and Windows Azure. You now have two options for implementing an HPC environment using Windows. You can extend the current infrastructure you have for HPC by adding in Compute Nodes in Windows Azure, using a “Broker Node”.  You can then purchase time for adding machines, and then stop paying for them when the work is completed. This is a common pattern in groups that have a constant need for HPC, but need to “burst” that load count under certain conditions. The second option is to install only a Head Node and a Broker Node onsite, and host all Compute Nodes in Windows Azure. This is often the pattern for organizations that need HPC on a scheduled and periodic basis, such as financial analysis or actuarial table calculations. References: Blog entry on Hybrid HPC with Windows Azure: http://blogs.msdn.com/b/ignitionshowcase/archive/2010/12/13/high-performance-computing-on-premise-and-in-the-windows-azure-cloud.aspx  Links for further research on HPC, includes Windows Azure information: http://blogs.msdn.com/b/ncdevguy/archive/2011/02/16/handy-links-for-hpc-and-azure.aspx 

  Read the article

• Are You Afraid of Each Other? Study Shows CMO’s/CIO’s Missing Benefits of Collaboration

  - by Mike Stiles

  Remember that person in school you spent months being too scared to talk to?  Then when you finally did, it led to a wonderful friendship…if not something more. New research from Oracle, Social Media Today and Leader Networks shows marketing and IT need to get over whatever’s holding them back and start reaping the benefits of collaboration. Back in the old days of just a few years ago, marketing could stay on their side of the building, IT could stay on their side of the building, and both could refer to the other as “those guys.” Today, the structure of organizations is shifting from islands to “us,” one integrated body where each part knows what the other parts are doing, and all parts work together in accomplishing job one…a winning customer experience. Ignore that, and you start losing. Give your reluctance to change priority over the benefits of new collaborations, and you start losing. You’re either working together and accelerating forward or getting in the way of each other’s separate agendas and grinding down…much to your competitors’ delight. The study reveals a basic current truth: those who are collaborating in marketing and IT report being more effective, however less than 1/3 report collaborating even “frequently.” In other words, this is obviously a good thing, so we’d better not do it. Smart. The white paper, “Socially Driven Collaboration,” set out to explore how today’s always-changing digital, social and mobile landscape is forcing change across the enterprise, whether it’s welcomed or not. Part of what it found is marketing and IT leaders are not unaware of what’s going on and see their roles evolving. And both know the ability to collaborate more effectively now exists. And of those who are collaborating, over 2/3 say they’re “more effective” professionally because of it. Yet even if you don’t want to take the Oracle study’s word for it, an August 2013 Accenture study of 400 senior marketing and 250 IT executives revealed only 10% think CMO/CIO collaboration is at the right level. There’s a lot of room for improvement here, and not just around people. Collaboration is also being called for across processes and technologies. Business benefits of such collaboration cited in the Oracle study include stronger marketing messages, faster speed-to-market, greater product adoption, faster discovery of product and service shortcomings, and reduction in project costs. Those are the benefits you will cheat yourself out of by keeping “those guys” at arm’s length and continuing to try to function in traditional roles while modern business and the consumer is changing around you. “Intelligence is the ability to adapt to change.” –Stephen Hawking @mikestilesPhoto: istockphoto

  Read the article

• Is your test method self-validating ?

  - by mehfuzh

  Writing state of art unit tests that can validate your every part of the framework is challenging and interesting at the same time, its like becoming a samurai. One of the key concept in this is to keep our test synced all the time as underlying code changes and thus breaking them to the furthest unit as possible.  This also means, we should avoid  multiple conditions embedded in a single test. Let’s consider the following example of transfer funds. [Fact] public void ShouldAssertTranserFunds() {     var currencyService = Mock.Create<ICurrencyService>();     //// current rate     Mock.Arrange(() => currencyService.GetConversionRate("AUS", "CAD")).Returns(0.88f);       Account to = new Account { Currency = "AUS", Balance = 120 };     Account from = new Account { Currency = "CAD" };       AccountService accService = new AccountService(currencyService);       Assert.Throws<InvalidOperationException>(() => accService.TranferFunds(to, from, 200f));       accService.TranferFunds(to, from, 100f);       Assert.Equal(from.Balance, 88);     Assert.Equal(20, to.Balance); } At first look,  it seems ok but as you look more closely , it is actually doing two tasks in one test. At line# 10 it is trying to validate the exception for invalid fund transfer and finally it is asserting if the currency conversion is successfully made. Here, the name of the test itself is pretty vague. The first rule for writing unit test should always reflect to inner working of the target code, where just by looking at their names it is self explanatory. Having a obscure name for a test method not only increase the chances of cluttering the test code, but it also gives the opportunity to add multiple paths into it and eventually makes things messy as possible. I would rater have two test methods that explicitly describes its intent and are more self-validating. ShouldThrowExceptionForInvalidTransferOperation ShouldAssertTransferForExpectedConversionRate Having, this type of breakdown also helps us pin-point reported bugs easily rather wasting any time on debugging for something more general and can minimize confusion among team members. Finally, we should always make our test F.I.R.S.T ( Fast.Independent.Repeatable.Self-validating.Timely) [ Bob martin – Clean Code]. Only this will be enough to ensure, our test is as simple and clean as possible.   Hope that helps

  Read the article

• NEC Corporation uPD720200 USB 3.0 controller doesn't run at full speed

  - by Radek Zyskowski

  I have fresh install of Ubuntu 10.10. I have external HD on USB 3.0. Trying to connect this via PCI Express NEC controller. dmesg: [ 8966.820078] usb 6-3: new high speed USB device using xhci_hcd and address 0 [ 8966.839831] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.840580] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.841329] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.842079] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep [ 8966.843343] scsi8 : usb-storage 6-3:1.0 [ 8967.847144] scsi 8:0:0:0: Direct-Access SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5 [ 8967.847589] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 8967.847923] sd 8:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 8967.848341] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.850959] sd 8:0:0:0: [sdb] Write Protect is off [ 8967.850963] sd 8:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 8967.850966] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.851818] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.852365] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.852370] sdb: sdb1 [ 8967.871315] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.871853] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 8967.871856] sd 8:0:0:0: [sdb] Attached SCSI disk [ 8967.950728] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint [ 8967.951355] sd 8:0:0:0: [sdb] Sense Key : Recovered Error [current] [descriptor] [ 8967.951361] Descriptor sense data with sense descriptors (in hex): [ 8967.951363] 72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00 [ 8967.951375] 00 00 00 00 00 50 [ 8967.951380] sd 8:0:0:0: [sdb] ASC=0x4 ASCQ=0x1d [ 8968.790076] xhci_hcd 0000:02:00.0: HC died; cleaning up [ 8968.790076] usb 6-3: USB disconnect, address 2 [ 8999.008554] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008558] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_TIME_OUT driverbyte=DRIVER_OK [ 8999.008562] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 39 00 00 3e 00 [ 8999.008573] end_request: I/O error, dev sdb, sector 1953535801 [ 8999.008578] Buffer I/O error on device sdb1, logical block 1953535738 [ 8999.008582] Buffer I/O error on device sdb1, logical block 1953535739 [ 8999.008585] Buffer I/O error on device sdb1, logical block 1953535740 [ 8999.008589] Buffer I/O error on device sdb1, logical block 1953535741 [ 8999.008592] Buffer I/O error on device sdb1, logical block 1953535742 [ 8999.008595] Buffer I/O error on device sdb1, logical block 1953535743 [ 8999.008600] Buffer I/O error on device sdb1, logical block 1953535744 [ 8999.008603] Buffer I/O error on device sdb1, logical block 1953535745 [ 8999.008606] Buffer I/O error on device sdb1, logical block 1953535746 [ 8999.008609] Buffer I/O error on device sdb1, logical block 1953535747 [ 8999.008642] scsi 8:0:0:0: rejecting I/O to offline device [ 8999.008747] scsi 8:0:0:0: [sdb] Unhandled error code [ 8999.008749] scsi 8:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 8999.008752] scsi 8:0:0:0: [sdb] CDB: Read(10): 28 00 74 70 97 77 00 00 3e 00 [ 8999.008760] end_request: I/O error, dev sdb, sector 1953535863 sudo lspci -v 2:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Physical Slot: 32 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fe9fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable- Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd If I try to put into this controller any USB 2.0, it works fine. But USB 3.0 nope. Any idea?

  Read the article

• Project Euler 18: (Iron)Python

  - by Ben Griswold

  In my attempt to learn (Iron)Python out in the open, here’s my solution for Project Euler Problem 18.  As always, any feedback is welcome. # Euler 18 # http://projecteuler.net/index.php?section=problems&id=18 # By starting at the top of the triangle below and moving # to adjacent numbers on the row below, the maximum total # from top to bottom is 23. # # 3 # 7 4 # 2 4 6 # 8 5 9 3 # # That is, 3 + 7 + 4 + 9 = 23. # Find the maximum total from top to bottom of the triangle below: # 75 # 95 64 # 17 47 82 # 18 35 87 10 # 20 04 82 47 65 # 19 01 23 75 03 34 # 88 02 77 73 07 63 67 # 99 65 04 28 06 16 70 92 # 41 41 26 56 83 40 80 70 33 # 41 48 72 33 47 32 37 16 94 29 # 53 71 44 65 25 43 91 52 97 51 14 # 70 11 33 28 77 73 17 78 39 68 17 57 # 91 71 52 38 17 14 91 43 58 50 27 29 48 # 63 66 04 68 89 53 67 30 73 16 69 87 40 31 # 04 62 98 27 23 09 70 98 73 93 38 53 60 04 23 # NOTE: As there are only 16384 routes, it is possible to solve # this problem by trying every route. However, Problem 67, is the # same challenge with a triangle containing one-hundred rows; it # cannot be solved by brute force, and requires a clever method! ;o) import time start = time.time() triangle = [ [75], [95, 64], [17, 47, 82], [18, 35, 87, 10], [20, 04, 82, 47, 65], [19, 01, 23, 75, 03, 34], [88, 02, 77, 73, 07, 63, 67], [99, 65, 04, 28, 06, 16, 70, 92], [41, 41, 26, 56, 83, 40, 80, 70, 33], [41, 48, 72, 33, 47, 32, 37, 16, 94, 29], [53, 71, 44, 65, 25, 43, 91, 52, 97, 51, 14], [70, 11, 33, 28, 77, 73, 17, 78, 39, 68, 17, 57], [91, 71, 52, 38, 17, 14, 91, 43, 58, 50, 27, 29, 48], [63, 66, 04, 68, 89, 53, 67, 30, 73, 16, 69, 87, 40, 31], [04, 62, 98, 27, 23, 9, 70, 98, 73, 93, 38, 53, 60, 04, 23]] # Loop through each row of the triangle starting at the base. for a in range(len(triangle) - 1, -1, -1): for b in range(0, a): # Get the maximum value for adjacent cells in current row. # Update the cell which would be one step prior in the path # with the new total. For example, compare the first two # elements in row 15. Add the max of 04 and 62 to the first # position of row 14.This provides the max total from row 14 # to 15 starting at the first position. Continue to work up # the triangle until the maximum total emerges at the # triangle's apex. triangle [a-1][b] += max(triangle [a][b], triangle [a][b+1]) print triangle [0][0] print "Elapsed Time:", (time.time() - start) * 1000, "millisecs" a=raw_input('Press return to continue')

  Read the article

• The Niantic Project: Ingress by Felicia Hajra-Lee

  Despite the current fact that the augmented reality game for Android is still in beta phase, it is amazing to see that the world of literature is already taking momentum on this 'real-life' universe. After reading 'The Alignment: Ingress' by Thomas Greanias it took only a blink of the eye to go for 'The Niantic Project: Ingress' by Felicia Hajra-Lee, too. Here is the review I posted on Amazon.com: Ingress, a parallel universe to our reality, is here. There is no doubt about this anymore... The Niantic Project, originated at the CERN collider in Geneva, Switzerland, got into focus of global players. And the game is hard; fair-play is only for the fainted ones. Felicia understands to drag the audience directly into the action of the Niantic Project and its protagonists. The novella is heavily based on the investigations posted daily on the website of Ingress. She really understands how to interweave the various clues and creates an atmosphere where it sometimes feels challenging to differentiate between fiction and reality. It all starts with 'Epiphany Night' at the Niantic Labs, the high exposure of Exotic Matter (XM) and the escape of scientist Dr. Devra Bogdanovich and 'sentinel' Roland Jarvis. Of course, a new research, or should we name it technology, like the Niantic Project has to be protected and there are multiple parties on the hunt. Throughout the various chapters Felicia introduces new potential buyers from all over the globe, gives us detailed insights on the hunters and their brutal effectiveness to finish an assignment, and manages to keep the reader in high-pitched mode thanks to a couple of turn-arounds in the overall story. Personally, I have to say that I really enjoyed reading this title. Felicia's love to details is absolutely amazing, and sometimes I was really wondering whether she would be one of the assassins. But unfortunately I also have to say that I'm not a great fan of the structural organization of the (title-less) chapters. It is fascinating to follow the ventures of Devra, Farlowe and 855 but occasionally I had to go back to previous paragraphs in order to keep track of the individual plots. Overall a great title, captivating and rich in details but simply too short. Please Fecilia, gives us more to read. As an owner of an Android smartphone or tablet, you should get yourself into the world of Ingress. Check out the Play Store to install the app. Now. ;-)

  Read the article

• Open World Day 1 Continued

  - by Antony Reynolds

  A Day in the Life of an Oracle OpenWorld Attendee Part II A couple of things I forgot to mention about yesterdays OpenWorld. First I attended a presentation on SOA Suite and Virtualization which explained how Oracle Virtual Assembly Builder (OVAB) can be used to accelerate the deployment of an Enterprise Deployment Guide (EDG) compliant SOA Suite infrastructure.  OVAB provides the ability to introspect a deployed software component such as WebLogic Server, SOA Suite or other components and extract the configuration and package it up for rapid deployment into an Oracle Virtual Machine.  OVAB allows multiple machines to be configured and connections made between the machines and outside resources such as databases.  That by itself is pretty cool and has been available for a while in OVAB.  What is new is that Oracle has done this for an EDG compliant installations and made it available as an OVAB assembly for customers to use, significantly accelerating the deployment of an EDG deployment.  A real help for customers standing up EDG environments, particularly in test, dev and QA environments. The other thing I forgot to mention was the most memorable demo I saw at OpenWorld.  This was done by my co-author Matt Wright who was showcasing the products of his company Rubicon Red.  They showed a really cool application called OneSpot which puts all the information about a single users business processes in one spot!  Apparently a customer suggested the name.  It allows business flows to be defined that map onto events.  As events occur the status of the business flow is updated to reflect the change.  The interface is strongly reminiscent of social media sites and provides a graphical view of business flows.  So how does this differ from BPEL and BPM process flows?  The OneSpot process flow is more like a BAM process flow, it is based on events arriving from multiple sources, and is focused on the clients view of the process, not the actual business process.  This is important because it allows an end user to get a view of where his current business flow is and what actions, if any, are required of him.  This by itself is great, but better still is that OneSpot has a real time updating view of events that have occurred (BAM style no need to refresh the browser).  This means that as new events occur the end user can see them and jump to the business flow or take other appropriate actions.  Under the covers OneSpot makes use of Oracle Human Workflow to provide a forms interface, but this is not the HWF GUI you know!  The HWF GUI screens are much prettier and have more of a social media feel about them due to their use of images and pulling in relevant related information.  If you are at OOW I strongly recommend you visit Matt or John at the Rubicon Red stand and ask, no demand a demo of OneSpot!

  Read the article

• Miracle Growth Of Organs From Our Own Cells

  - by Rekha

  At the current situation, there is a shortage of healthy organs. The donor and patient also have to be closely matched and there are chances for the patient’s immune system may reject the transplant. Right now, researchers are seriously involved in a new kind of solution: "bioartifical" organs are being grown from the patient’s own cells. There are a few people who have already received lab-grown bladders. Bladder technique was developed by Anthony Atala of the Wake Forest Institute for Regenerative Medicine in Winston-Salem, North Carolina. The healthy cells from the patient’s diseased bladder is taken and cause them to multiply profusely in petri dishes. The muscle cells go on the outside, urothelial cells on the inside by layering the cells one layer at a time. The bladder-to-be is then incubated at body temperature until the cells form functioning tissue. This process could take six to eight months. Organs with lots of blood vessels, such as kidneys or livers, are harder to grow than hollow ones like bladders. Atala’s group works on 22 organs and tissues including ears, recently made a functioning piece of human liver. Others in the list includes:  Columbia University – Jawbone, Yale University – Lung, University of Minnesota – Rat heart, University of Michigan – Artificial Kidney There are possibilities that growing a copy of patient’s organ is not always possible – for instance, when the original is completely damaged by cancer. By using stem cell bank collected without harming human embryos from amniotic fluid in the womb, those cells are coaxed into becoming heart, liver and other organ cells. A bank of 1,00,000 stem cell samples would have enough genetic variety to match nearly any patient. Surgeons can order organs grown as needed instead of waiting for the perfect donor. "There are few things as devastating for a surgeon as knowing you have to replace the tissue and you’re doing something that’s not ideal," says Atala, a urologic surgeon himself. "Wouldn’t it be great if they had their own organ?" Great for the patient especially, he means. Via National Geographic  and cc image credit This article titled,Miracle Growth Of Organs From Our Own Cells, was originally published at Tech Dreams. Grab our rss feed or fan us on Facebook to get updates from us.

  Read the article

• Make Chrome’s New Tab Page More Useful and Artistic

  - by Asian Angel

  Are you tired of the default New Tab Page in Google Chrome and want something more useful and artistic? Then join us as we look at the Incredible StartPage extension. Before Here is the default “New Tab Page” in our Chrome Browser…it looks rather plain and boring. How about something better? Incredible StartPage in Action This is what our “New Tab Page” looked like after installing the extension. As you can see there is a “Note Section”, “Closed Tabs Section”, “All Bookmarks Section”, and a “Bookmarks Toolbar (links only) Section”. Note: Clicking on links in Incredible StartPage will open them in the current tab. If you want you can easily modify how Incredible StartPage looks using the “Options” in the upper right corner. After only a couple of minutes our “New Tab Page” was looking nice…new background color, image, and altered note. A very useful feature of the “Note Section” is that you can add your notes to an e-mail by clicking on the “Post to Gmail Link” just below the note. Note: Special “Chrome Pages” (i.e. Extensions) will not open from the “Closed Tabs Section”. When you click on “Post to Gmail” a new tab will be opened with your notes pre-pasted into the main letter body. All that is left for you to do is select the appropriate e-mail address(es) and to make any desired modifications to the “Subject & Letter”. Going back to the “New Tab Page” you can trade bookmarks back and forth between the “All Bookmarks Section” and the “Bookmarks Toolbar Section”. Simply drag-and-drop as desired…but keep in mind that any changes made here will also be reflected in your “Bookmarks Toolbar & Other Bookmarks”. There is our bookmark freshly traded over to the “Bookmarks Toolbar Section”…looking very nice. Conclusion If you are tired of the default “New Tab Page” in Google Chrome then the Incredible StartPage extension will make for a refreshing change. Links Download the Incredible StartPage extension (Google Chrome Extensions) Similar Articles Productive Geek Tips Turn Chrome’s New Tab Page into a Google Tasks PageAccess Google Chrome’s Special Pages the Easy WayReplace Google Chrome’s New Tab Page with Speed DialRegistry Hack to Set Internet Explorer Start PageMake iGoogle Your Startup Page in Microsoft Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Get Better Windows Search With UltraSearch Scan News With NY Times Article Skimmer SpeedyFox Claims to Speed up your Firefox Beware Hover Kitties Test Drive Mobile Phones Online With TryPhone Ben & Jerry’s Free Cone Day, 3/23/10

  Read the article

• CodePlex Daily Summary for Wednesday, November 23, 2011

  CodePlex Daily Summary for Wednesday, November 23, 2011Popular ReleasesVisual Leak Detector for Visual C++ 2008/2010: v2.2.1: Enhancements: * strdup and _wcsdup functions support added. * Preliminary support for VS 11 added. Bugs Fixed: * Low performance after upgrading from VLD v2.1. * Memory leaks with static linking fixed (disabled calloc support). * Runtime error R6002 fixed because of wrong memory dump format. * version.h fixed in installer. * Some PVS studio warning fixed.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.10: 3.6.0.10 22-Nov-2011 Update: Removed PreEmptive Platform integration (PreEmptive analytics) Removed all PreEmptive attributes Removed PreEmptive.dll assembly references from all projects Added first support to ADAM/AD LDS Thanks to PatBea. Work Item 9775: http://netsqlazman.codeplex.com/workitem/9775Developer Team Article System Management: DTASM v1.3: ?? ??? ???? 3 ????? ???? ???? ????? ??? : - ????? ?????? ????? ???? ?? ??? ???? ????? ?? ??? ? ?? ???? ?????? ???? ?? ???? ????? ?? . - ??? ?? ???? ????? ???? ????? ???? ???? ?? ????? , ?????? ????? ????? ?? ??? . - ??? ??????? ??? ??? ???? ?? ????? ????? ????? .SharePoint 2010 FBA Pack: SharePoint 2010 FBA Pack 1.2.0: Web parts are now fully customizable via html templates (Issue #323) FBA Pack is now completely localizable using resource files. Thank you David Chen for submitting the code as well as Chinese translations of the FBA Pack! The membership request web part now gives the option of having the user enter the password and removing the captcha (Issue # 447) The FBA Pack will now work in a zone that does not have FBA enabled (Another zone must have FBA enabled, and the zone must contain the me...SharePoint 2010 Education Demo Project: Release SharePoint SP1 for Education Solutions: This release includes updates to the Content Packs for SharePoint SP1. All Content Packs have been updated to install successfully under SharePoint SP1SQL Monitor - tracking sql server activities: SQLMon 4.1 alpha 6: 1. improved support for schema 2. added find reference when right click on object list 3. added object rename supportBugNET Issue Tracker: BugNET 0.9.126: First stable release of version 0.9. Upgrades from 0.8 are fully supported and upgrades to future releases will also be supported. This release is now compiled against the .NET 4.0 framework and is a requirement. Because of this the web.config has significantly changed. After upgrading, you will need to configure the authentication settings for user registration and anonymous access again. Please see our installation / upgrade instructions for more details: http://wiki.bugnetproject.c...Anno 2070 Assistant: v0.1.0 (STABLE): Version 0.1.0 Features Production Chains Eco Production Chains (Complete) Tycoon Production Chains (Disabled - Incomplete) Tech Production Chains (Disabled - Incomplete) Supply (Disabled - Incomplete) Calculator (Disabled - Incomplete) Building Layouts Eco Building Layouts (Complete) Tycoon Building Layouts (Disabled - Incomplete) Tech Building Layouts (Disabled - Incomplete) Credits (Complete)Free SharePoint 2010 Sites Templates: SharePoint Server 2010 Sites Templates: here is the list of sites templates to be downloadedVsTortoise - a TortoiseSVN add-in for Microsoft Visual Studio: VsTortoise Build 30 Beta: Note: This release does not work with custom VsTortoise toolbars. These get removed every time when you shutdown Visual Studio. (#7940) Build 30 (beta)New: Support for TortoiseSVN 1.7 added. (the download contains both setups, for TortoiseSVN 1.6 and 1.7) New: OpenModifiedDocumentDialog displays conflicted files now. New: OpenModifiedDocument allows to group items by changelist now. Fix: OpenModifiedDocumentDialog caused Visual Studio 2010 to freeze sometimes. Fix: The installer didn...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.30: Highlight features & improvements: • Performance optimization. • Back in stock notifications. • Product special price support. • Catalog mode (based on customer role) To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).WPF Converters: WPF Converters V1.2.0.0: support for enumerations, value types, and reference types in the expression converter's equality operators the expression converter now handles DependencyProperty.UnsetValue as argument values correctly (#4062) StyleCop conformance (more or less)Json.NET: Json.NET 4.0 Release 4: Change - JsonTextReader.Culture is now CultureInfo.InvariantCulture by default Change - KeyValurPairConverter no longer cares about the order of the key and value properties Change - Time zone conversions now use new TimeZoneInfo instead of TimeZone Fix - Fixed boolean values sometimes being capitalized when converting to XML Fix - Fixed error when deserializing ConcurrentDictionary Fix - Fixed serializing some Uris returning the incorrect value Fix - Fixed occasional error when...Media Companion: MC 3.423b Weekly: Ensure .NET 4.0 Full Framework is installed. (Available from http://www.microsoft.com/download/en/details.aspx?id=17718) Ensure the NFO ID fix is applied when transitioning from versions prior to 3.416b. (Details here) Replaced 'Rebuild' with 'Refresh' throughout entire code. Rebuild will now be known as Refresh. mc_com.exe has been fully updated TV Show Resolutions... Resolved issue #206 - having to hit save twice when updating runtime manually Shrunk cache size and lowered loading times f...Delta Engine: Delta Engine Beta Preview v0.9.1: v0.9.1 beta release with lots of refactoring, fixes, new samples and support for iOS, Android and WP7 (you need a Marketplace account however). If you want a binary release for the games (like v0.9.0), just say so in the Forum or here and we will quickly prepare one. It is just not much different from v0.9.0, so I left it out this time. See http://DeltaEngine.net/Wiki.Roadmap for details.ASP.net Awesome Samples (Web-Forms): 1.0 samples: Demos and Tutorials for ASP.net Awesome VS2008 are in .NET 3.5 VS2010 are in .NET 4.0 (demos for the ASP.net Awesome jQuery Ajax Controls)SharpMap - Geospatial Application Framework for the CLR: SharpMap-0.9-AnyCPU-Trunk-2011.11.17: This is a build of SharpMap from the 0.9 development trunk as per 2011-11-17 For most applications the AnyCPU release is the recommended, but in case you need an x86 build that is included to. For some dataproviders (GDAL/OGR, SqLite, PostGis) you need to also referense the SharpMap.Extensions assembly For SqlServer Spatial you need to reference the SharpMap.SqlServerSpatial assemblyAJAX Control Toolkit: November 2011 Release: AJAX Control Toolkit Release Notes - November 2011 Release Version 51116November 2011 release of the AJAX Control Toolkit. AJAX Control Toolkit .NET 4 - Binary – AJAX Control Toolkit for .NET 4 and sample site (Recommended). AJAX Control Toolkit .NET 3.5 - Binary – AJAX Control Toolkit for .NET 3.5 and sample site (Recommended). Notes: - The current version of the AJAX Control Toolkit is not compatible with ASP.NET 2.0. The latest version that is compatible with ASP.NET 2.0 can be found h...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.36: Fix for issue #16908: string literals containing ASP.NET replacement syntax fail if the ASP.NET code contains the same character as the string literal delimiter. Also, we shouldn't be changing the delimiter for those literals or combining them with other literals; the developer may have specifically chosen the delimiter used because of possible content inserted by ASP.NET code. This logic is normally off; turn it on via the -aspnet command-line flag (or the Code.Settings.AllowEmbeddedAspNetBl...MVC Controls Toolkit: Mvc Controls Toolkit 1.5.5: Added: Now the DateRanteAttribute accepts complex expressions containing "Now" and "Today" as static minimum and maximum. Menu, MenuFor helpers capable of handling a "currently selected element". The developer can choose between using a standard nested menu based on a standard SimpleMenuItem class or specifying an item template based on a custom class. Added also helpers to build the tree structure containing all data items the menu takes infos from. Improved the pager. Now the developer ...New ProjectsActiveWorlds World Server Admin PowerShell SnapIn: The purpose of this PowerShell SnapIn is to provide a set of tools to administer the world server from PowerShell. It leverages the ActiveWorlds SDK .NET Wrapper to provide this functionality.Aigu: Enter special characters like you would on your mobile phone. For instance, if you want to type 'é', you just hold down 'e' and a menu will appear. Selected the desired character using the arrow keys and press 'enter'. Simple but powerful.Are you workaholic?: Are you a workaholic? Did your Doctor advice you not to stare at the computer monitor for a long time? Then this app is perfectly made for you. It runs in the background, and alerts you to take periodic rests for your eyes and body. What's more, It's open source (MS-PL).ATDIS PoC: privateAuto Version Web Assets: The AVWA project is an HTTP Module written in C# that is designed to allow for versioning of various web assets such as .CSS and .JS files. This allows you to publish new versions of these files without having to force the server or the client browsers to expire cache.Bachelor Thesis Algorithm Test Bed: Algorithm Test Bed for my Bachelor ThesisBase64: Simple application helps converting strings and files from or to Base64 string. You can use any encoding to convert while a sidebar previews decoded string for all other encodings.BoracayExpress: BoracayExpressC++ Framework for Test Driven Development: A testing framework for C++ written in C++.Class2Table: Class2Table aka Entity2Table. Easy tool that allows creation of SQL tables from .Net types.Code for Demos & Experiments: This is where I will post code from demos and presentationsCodeMaker: CodeMaker?????????： 1、?????????? 2、???? 3、????? 4、??Python????????? ConsoleCommand: ConsoleCommand provides certain .Net commands for access from javascript console engines. Included are commands to set the text and background colors, as well as list and extract resources compiled in a .Net dll. Converter: Character code conversion tools ???????? CryptoInator - self contained, self-encrypting, self-decrypting image viewer: Original developed to encrypt and store NemID images in Denmark. DAiBears: Something, something, botDelicious Notify Plugin: Lets you push a blog post straight to Delicious from Live WriterDeveloperFile: Compresses Javascripts using the YUI .NET project. Loops through the root folder and subfolders for files matching the debug extension and creates new files using the release extension. (File extensions must match exactly).DotNetNuke SharePoint File Explorer: A DotNetNuke SharePoint File ExplorerDouban FM: WP7 Douban FM appGame Lib: Game Library is a open-source game library to allow focusing on the fun part of a game. It is developed in C#, but will be ported to C++ and VB.net.Google reader notes to Delicious Export tool (WPF): Google reader discontinued note in reader features. Current google reader allows to export users old notes in JSON format, This App will parse the JSON file & upload it to it delicious , delicious is a good alternative for note in readerHtml Source Transmitter Control: This web control allows getting a source of a web page, that will displayed before submit. So, developer can store a view of the html page, that was before server exception. It helps to reproduce bugs and can be used with other logging systems.Ideopuzzle: A puzzle gameImageShack-Uploader: This project demonstrates how to upload files automated to imageshack.us and other image hosters with C#.Insert Acronym Tags: Lets you insert <acronym> and <abbr> tags into your blog entry more easily.Insert Quick Link: Allows you to paste a link into the Writer window and have the a window similar to the one in Writer where you can change what text is to appear, open in new window, etc.Insert Video Plugin: Allows you to insert a video into a blog entry from a multitude of different sitesIoCWrap: Provides a wrapper to the various IoC container implementations so that it is possible to switch to a different provider without changing any application code.kaveepoj: sharepoint projectKinect Quiz Engine: Fun quiz game for the Kinect.Klaverjas: Test application for testing different new technologies in .NET (WCF, DataServices, C# stuff, Entity...etc.)Man In The Middle: A cyberpunk themed action with puzzle and strategy elements. Made with XNA as part of a game development course at the IT University of Copenhagen by Bo Bendtsen, Jonas Flensbak, Daniel Kromand, Jess Rahbek & Darryl Woodford.MediaSelektor: Simple tool to select mediasMicajah Mindtouch Deki Wiki Copier: Small C# application to move data between 2 Deki Wiki installs or, more importantly, from a wik.is account to a locally installed systemMineFlagger: MineFlagger is a mine clearing game modeled after Microsoft’s Minesweeper. In addition to standard play, MineFlagger incorporates an AI for fun and training.myXbyqwrhjadsfasfhgf: myXbyqwrhjadsfasfhgfnatoop: natoopNauplius.KeyStore: Provides secure application key storage backed by SQL 2008 and Active Directory.ObjectDB: An object database written using C# 4 and Mono.Cecil.PaceR: PaceR is an attempt to encapsulate a lot of the common code functionality I use on different projects. Instead of recreating functionality from memory or worse, copying from older projects, I'd like to have a central location to maintain this common code. Parseq: Parseq is a Parser Combinator library written in C# (version 2.0).PowerShell Network Adapter Configuration module: PowerShell Network Adapter Configuration module is a PowerShell module which provides functions for managing network adapters using WMI.public traffic tracker: This is a university project for a .net course. We develop a public traffic tracker applications for Windows Phone 7 devices, that can give information about the actual positions of the nearest vehicle on a given line. The speciality is that we use only the GPS information of the users' WP7 devices, so this is a completely software solution without any hardware investment. The disatvantage is that for the real operation we would need a lot of active WP7 user.puyo: puyoRadioTroll: Projeto web Radio TrollRead Feed Community: Read Feed CommunityReviewer: Reviewer.dk - Dansk spil og anmeldelsessite.Rollout Sharepoint Solutions - ROSS: ROSS performs the following actions: - Delete sitecollection and restart services - 'Get Latest Version' from SourceSafe - Rebuild Solution - Install all wsp solutions - Create SiteCollections - Check for build en provisioning errors - Send email to developers if errors occurredSchool Management: school managementSQL File Executer: This project is a class library written in c# which is used for executing *.sql files in remote server. Simply one dll file. You include it in your web project, add using statement at the top of your page, pass the parameters inside. Rest, it will do.Startup Manager: Startup Manager launches all startup programs at a managed rate therefore meaning that your computer doesn't crash everytime it starts up and you can use it immediately.stetic: ...Test Infrastructure Guidance: The purpose of this project is to provide guidance to testers in using TFS effectively as an ALM solution. TFS is much more than a simple code repository. Used with Visual Studio it can form a powerful testing solution and remove a lot of pain in dealing with test infrastructure overhead.Tête-à-tête: Tete-a-tete is an address book with a built-in function to send electronic mail over the Internet.Tipeysh! - Add-in that helps you creating C/C++ header files on a single click: Are you also feel miserable when you need to create a new header file in your Visual Studio C/C++ project? Repeatedly choosing "new header file", then writing the annoying (but needed) "#ifndef" section, then writing the class name with it's "private", "protected" and "public" access modifiers... too much clicks and typewriting! Well, there is a solution: Tipeysh! is a simple, easy to use, very handy and configurable Visual Studio Add-In, compatible for both the 2005 and 2008 versions. Once ...UMN Dashboard Project: academic projUsersMOSS: UsersMOSS est une petite application permettant de consulter sur un serveur MOSS les sites web (SPWeb) les users (SPUser), et les groupes (SPGroup). Cette application utilise le modèle objet de MOSS pour inspecter le contenu des objets d'un serveur MOSS. Cette application est loin d'être professionnelle, ou même terminée, mais elle me rend très souvent service. Surtout ne l'utilisez pas sur un serveur de production car le gestion du GC n'est pas faite, ce qui peut provoquer des plantages de v...UtilityLibrary.Win32: UtilityLibrary.Win32UW iLearn: The iLearn activity inference platform is a suite of desktop and mobile tools for logging, modeling, and classifying sensor data for mobile devices. It was created at the University of Washington.VsDocGen: Dynamic javascript documentation generation directly from xml comment documented source code.Windows Live Spaces Photo Album plugin: This is going to be a plugin for Windows Live Writer that will allow you to browse a Windows Live Space Photo Album.Windows Live Writer Plugin for Amazon Books using CueCat: This Windows Live Writer Plugin is for users who use WLW and wish to use their CueCat to scan books. ItemLookups are run against Amazon via its AWS and book image, title, author, and publisher is returned. This project was first created by Scott Hanselman on MSDN's Coding4Fun! X7: X7 makes it easier for win7user to clean the system. You'll no longer have to delete useless stuff in your win7. It's developed in bat.xDT - Commander: Using this application, the user can assign shortcuts (short texts) for various links/URLs. These short texts will be typed into a Textbox to then launch/go to the target (similar to the "Run" program in Windows).

  Read the article

• Using SurfaceFormat.Single and HLSL for GPGPU with XNA

  - by giancarlo todone

  I'm trying to implement a so-called ping-pong technique in XNA; you basically have two RenderTarget2D A and B and at each iteration you use one as texture and the other as target - and vice versa - for a quad rendered through an HLSL pixel shader. step1: A--PS--B step2: B--PS--A step3: A--PS--B ... In my setup, both RenderTargets are SurfaceFormat.Single. In my .fx file, I have a tachnique to do the update, and another to render the "current buffer" to the screen. Before starting the "ping-pong", buffer A is filled with test data with SetData<float>(float[]) function: this seems to work properly, because if I render a quad on the screen through the "Draw" pixel shader, i do see the test data being correctly rendered. However, if i do update buffer B, something does not function proerly and the next rendering to screen will be all black. For debug purposes, i replaced the "Update" HLSL pixel shader with one that should simply copy buffer A into B (or B into A depending on which among "ping" and "pong" phases we are...). From some examples i found on the net, i see that in order to correctly fetch a float value from a texture sampler from HLSL code, i should only need to care for the red channel. So, basically the debug "Update" HLSL function is: float4 ComputePS(float2 inPos : TEXCOORD0) : COLOR0 { float v1 = tex2D(bufSampler, inPos.xy).r; return float4(v1,0,0,1); } which still doesn't work and results in a all-zeroes ouput. Here's the "Draw" function that seems to properly display initial data: float4 DrawPS(float2 inPos : TEXCOORD0) : COLOR0 { float v1 = tex2D(bufSampler, inPos.xy).r; return float4(v1,v1,v1,1); } Now: playing around with HLSL doesn't change anything, so maybe I'm missing something on the c# side of this, so here's the infamous Update() function: _effect.Parameters["bufTexture"].SetValue(buf[_currentBuf]); _graphicsDevice.SetRenderTarget(buf[1 - _currentBuf]); _graphicsDevice.Clear(Color.Black); // probably not needed since RenderTargetUsage is DiscardContents _effect.CurrentTechnique = _computeTechnique; _computeTechnique.Passes[0].Apply(); _quadRender.Render(); _graphicsDevice.SetRenderTarget(null); _currentBuf = 1 - _currentBuf; Any clue?

  Read the article

• How do I Integrate Production Database Hot Fixes into Shared Database Development model?

  - by TetonSig

  We are using SQL Source Control 3, SQL Compare, SQL Data Compare from RedGate, Mercurial repositories, TeamCity and a set of 4 environments including production. I am working on getting us to a dedicated environment per developer, but for at least the next 6 months we are stuck with a shared model. To summarize our current system, we have a DEV SQL server where developers first make changes/additions. They commit their changes through SQL Source Control to a local hgdev repository. When they execute an hg push to the main repository, TeamCity listens for that and then (among other things) pushes hgdev repository to hgrc. Another TeamCity process listens for that and does a pull from hgrc and deploys the latest to a QA SQL Server where regression and integration tests are run. When those are passed a push from hgrc to hgprod occurs. We do a compare of hgprod to our PREPROD SQL Server and generate deployment/rollback scripts for our production release. Separate from the above we have database Hot Fixes that will need to be applied in between releases. The process there is for our Operations team make changes on the PreProd database, and then after testing, to use SQL Source Control to commit their hot fix changes to hgprod from the PREPROD database, and then do a compare from hgprod to PRODUCTION, create deployment scripts and run them on PRODUCTION. If we were in a dedicated database per developer model, we could simply automatically push hgprod back to hgdev and merge in the hot fix change (through TeamCity monitoring for hgprod checkins) and then developers would pick it up and merge it to their local repository and database periodically. However, given that with a shared model the DEV database itself is the source of all changes, this won't work. Pushing hotfixes back to hgdev will show up in SQL Source Control as being different than DEV SQL Server and therefore we need to overwrite the reposistory with the "change" from the DEV SQL Server. My only workaround so far is to just have OPS assign a developer the hotfix ticket with a script attached and then we run their hotfixes against DEV ourselves to merge them back in. I'm not happy with that solution. Other than working faster to get to dedicated environment, are they other ways to keep this loop going automatically?

  Read the article

< Previous Page | 498 499 500 501 502 503 504 505 506 507 508 509  | Next Page >