Search Results

Search found 13289 results on 532 pages for 'effective android'.

Page 503/532 | < Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >

  • Aligning music notes using String matching algorithms or Dynamic Programming

    - by Dolphin
    Hi I need to compare 2 sets of musical pieces (i.e. a playing-taken in MIDI format-note details extracted and saved in a database table, against sheet music-taken into XML format). When evaluating playing against sheet music (i.e.note details-pitch, duration, rhythm), note alignment needs to be done - to identify missed/extra/incorrect/swapped notes that from the reference (sheet music) notes. I have like 1800-2500 notes in one piece approx (can even be more-with polyphonic, right now I'm doing for monophonic). So will I have to have all these into an array? Will it be memory overloading or stack overflow? There are string matching algorithms like KMP, Boyce-Moore. But note alignment can also be done through Dynamic Programming. How can I use Dynamic Programming to approach this? What are the available algorithms? Is it about approximate string matching? Which approach is much productive? String matching algos like Boyce-Moore, or dynamic programming? How can I assess which is more effective? Greatly appreciate any insight or suggestions Thanks in advance

    Read the article

  • Force windows video driver reload. Is it possible at all?

    - by somemorebytes
    Hi there, Some drivers use parameters written in the registry to configure themselves when they get loaded at boot time. I can modify those values and then reboot, but I would like to know if it is possible to force the driver reload, making the changes effective without rebooting. Specifically, I am talking about the video driver (nvidia). I read somewhere, that calling through pINvoke() [User32.ll]::ChangeDisplaySettings() with a 640x480x8bits resolution,(which is so low that it should not be supported by a modern driver) will force windows to load the "Standard VGA driver", and making another call with the current resolution will load the nvidia driver again. This does not work though. At least in Windows 7, even if the low res is not displayed as "supported" the system reduces the screen to a little square in the center of the screen, showing the low res wihtout unloading the nvidia driver. So, is there any .NET/Win32 API, service to restart, or any way at all to force a video driver reload? Perhaps programatically disabling the device (as you could do from the Device Manager) and reenabling it again? Any idea? Thanks a lot.

    Read the article

  • ModRewrite weird redirect behavior on removing WWW

    - by vitto
    Hi, I'm trying to use some rule on my project to remove www from the beginning of the URL but I've some problem. my server structure is: domain.com/beta_folder domain.com/beta_folder/page+type domain.com/beta_folder/page+type/content+name domain.com/beta_folder/page+type/content+name/edit domain.com/beta_folder/page+type/content+name/etc. domain.com/beta_folder/.htaccess //here is where my htaccess is beta_folder is the site folder, and content+name are content vars, created to retrieve pages from the database. the site works perfect with this rules RewriteEngine On RewriteRule ^(page\+type/)([a-zA-Z0-9_+-]+)[/]?$ page_folder/page.php?varname=$2 My intention was to remove www, so I've added this rule but it isn't effective RewriteEngine On RewriteCond %{HTTP_HOST} ^www.domain.com$ [NC] RewriteRule ^(.*)$ http://domain.com$1 [R=301,L] RewriteRule ^(page\+type/)([a-zA-Z0-9_+-]+)[/]?$ page_folder/page.php?varname=$2 My problem starts if I digit www in front of my domain name: this works http://domain.com/beta_folder/page+type/content+name if i write http://www.domain.com/beta_folder/page+type/content+name the rewrite rule redirect me at http://www.domain.compage+type/content+name if i remove the www rules, the problem still active unfortunately, I can't make a public test for my domain basically, if I write http://www.domain.com/beta_folder the rules sends me to http://domain.com/ where I'm wrong?

    Read the article

  • SQL Databases and table design/organization

    - by John McMullen
    (NOOB disclaimer) I'm working on a system (a type of map), that is accessed mostly via 3 fields: ID (auto incremented), X coordinate, and Y coordinate. As it is right now, i have all data on the map, stored in 1 table. Whenever the map display is loaded it simply queries the database for contents in x and y, and the DB gives the data (other fields in the same entry). If an item on the map is doing something, it has a flag saying its doing something, and then has an ID of the action in another table holding that type of 'actions'. Essentially, for all map data, its stored in 1 table. All actions of a certain type are stored in their own table. I'm a noob, and i'm wondering what the most effective/efficient structure for such a design? (a map that has items, and each item has stats/actions). I'm using PHP atm, using standard SQL queries to get my data. Should i split up the tables so that there are only x number of entries on a table? (coord range limits)? Should it just keep growing and growing? There's a lot of queries to the table... so just tryin to see what is best :/

    Read the article

  • Why is BorderLayout calling setSize() and setBounds()?

    - by ags
    I'm trying to get my head around proper use of the different LayoutManagers to make my GUI design skills more efficient and effective. For me, that usually requires a detailed understanding of what is going on under the hood. I've found some good discussion of the interaction and consequences of a Container using BorderLayout containing a Container using FlowLayout. I understand it for the most part, but wanted to confirm my mental model and to do so I am looking at the code for BorderLayout. In the code snippet below taken from BorderLayout.layoutContainer(), note the calls to the child Component's setSize() method followed by setBounds(). Looking at the source for these methods of Component, setSize() actually calls setBounds() with the current values for Component.x and Component.y. Why is this done (and not entirely redudant?) Doesn't the setBounds() call completely overwrite the results of the setSize() call? if ((c=getChild(NORTH,ltr)) != null) { c.setSize(right - left, c.height); Dimension d = c.getPreferredSize(); c.setBounds(left, top, right - left, d.height); top += d.height + vgap; } I'm also tring to understand where/when the child Component's size is initially set (before the LayoutManager.layoutContainer() method is called). Finally, this post itself raises a "meta-question": in a situation like this, where the source is available elsewhere, is the accepteed protocol to include the entire method? Or some other way to make it easier for folks to participate in the thread? Thanks.

    Read the article

  • What algorithm can I use to determine points within a semi-circle?

    - by khayman218
    I have a list of two-dimensional points and I want to obtain which of them fall within a semi-circle. Originally, the target shape was a rectangle aligned with the x and y axis. So the current algorithm sorts the pairs by their X coord and binary searches to the first one that could fall within the rectangle. Then it iterates over each point sequentially. It stops when it hits one that is beyond both the X and Y upper-bound of the target rectangle. This does not work for a semi-circle as you cannot determine an effective upper/lower x and y bounds for it. The semi-circle can have any orientation. Worst case, I will find the least value of a dimension (say x) in the semi-circle, binary search to the first point which is beyond it and then sequentially test the points until I get beyond the upper bound of that dimension. Basically testing an entire band's worth of points on the grid. The problem being this will end up checking many points which are not within the bounds.

    Read the article

  • Database schema for a library

    - by ABach
    Hi all - I'm designing a library management system for a department at my university and I wanted to enlist your eyes on my proposed schema. This post is primarily concerned with how we store multiple copies of each book; something about what I've designed rubs me the wrong way, and I'm hoping you all can point out better ways to tackle things. For dealing with users checking out books, I've devised three tables: book, customer, and book_copy. The relationships between these tables are as follows: Every book has many book_copies (to avoid duplicating the book's information while storing the fact that we have multiple copies of that book). Every user has many book_copies (the other end of the relationship) The tables themselves are designed like this: ------------------------------------------------ book ------------------------------------------------ + id + title + author + isbn + etc. ------------------------------------------------ ------------------------------------------------ customer ------------------------------------------------ + id + first_name + first_name + email + address + city + state + zip + etc. ------------------------------------------------ ------------------------------------------------ book_copy ------------------------------------------------ + id + book_id (FK to book) + customer_id (FK to customer) + checked_out + due_date + etc. ------------------------------------------------ Something about this seems incorrect (or at least inefficient to me) - the perfectionist in me feels like I'm not normalizing this data correctly. What say ye? Is there a better, more effective way to design this schema? Thanks!

    Read the article

  • What Test Environment Setup do Committers Use in the Ruby Community?

    - by viatropos
    Today I am going to get as far as I can setting up my testing environment and workflow. I'm looking for practical advice on how to setup the test environment from you guys who are very passionate and versed in Ruby Testing. By the end of the day (6am PST?) I would like to be able to: Type one 1-command to run test suites for ANY project I find on Github. Run autotest for ANY Github project so I can fork and make TESTABLE contributions. Build gems from the ground up with Autotest and Shoulda. For one reason or another, I hardly ever run tests for projects I clone from Github. The major reason is because unless they're using RSpec and have a Rake task to run the tests, I don't see the common pattern behind it all. I have built 3 or 4 gems writing tests with RSpec, and while I find the DSL fun, it's less than ideal because it just adds another layer/language of methods I have to learn and remember. So I'm going with Shoulda. But this isn't a question about which testing framework to choose. So the questions are: What is your, the SO reader and Github project committer, test environment setup using autotest so that whenever you git clone a gem, you can run the tests and autotest-develop them if desired? What are the guys who are writing the Paperclip Tests and Authlogic Tests doing? What is their setup? Thanks for the insight. Looking for answers that will make me a more effective tester.

    Read the article

  • Supersede users need to press enter after inputting a string in python 3.0

    - by Cimex
    I've been attempting to create a simple Rock, Paper, Scissors game in python 3.0 -- very standard task for anybody learning programming. But, as I finish up to a point, I think,"wow, that'd be awesome", or,"it'd be cool to do this!" So anyways, I keep building upon the project... I've developed a menu, a single player game vs the computer, and just finished the multiplayer game. But, I've realized, that the multiplayer game isn't very effective. It just dosen't work like the analog version of the game. Currently, it'll ask for player1's input, then player2's input, compare them, and spit out the result and the current score. What I'd rather have happen is that the program asks for both players input at the same time and both players input their choice at the same time. I understand that I can easily do that by just grabbing the index of the first and second answer and compare the 2 inputs -- easy. But what I'd rather have happen is that after both players enter their one character answers at the same time (r for rock, p for paper, or s for scissors), then the program will auto enter the input. Not needing someone to press enter. The input would be dictated by the fact that 2 characters have been entered. I guess my question is: Is there any way to dictate what can be used as an input for 'enter'?

    Read the article

  • Mulltiple configurations in Qt

    - by user360607
    Hi all! I'm new to Qt Creator and I have several questions regarding multiple build configurations. A side note: I have the QtCreator 1.3.1 installed on my Linux machine. I need to have two configurations in my Qt Creator project. The thing is that these aren't simply debug and release but are based on the target architecture - x86 or x64. I came across http://stackoverflow.com/questions/2259192/building-multiple-targets-in-qt-qmake and from that I went trying something like: Conf_x86 { TARGET = MyApp_x86 } Conf_x64 { TARGET = MyApp_x64 } This way however I don't seems to be able to use the Qt Creator IDE to build each of these separately (Build All, Rebuild All, etc. options from the IDE menu). Is there a way to achieve this - may be even show Conf_x86 and Conf_x64 as new build configurations in Qt Creator? One other thing the Qt I have is 64 bit so by default the target built using Qt Creator IDE will also be 64 bit. I noticed that the effective qmake call in the build step includes the following option '-spec linux-g++-64'. I also noticed that should I add '-spec linux-g++-32' in 'Additional arguments' it would override '-spec linux-g++-64' and the resulting target will be 32 bit. How can I achieve this by simply editing the contents of the .pro file? I saw that all these changes are initially saved in the .pro.user file but does doesn't suit me at all. I need to be able to make these configurations from the .pro file if possible. Any help will be appreciated. 10x in advance!

    Read the article

  • Where does java.util.logging.Logger store their log

    - by Harry Pham
    This might be a stupid question but I am a bit lost with java Logger private static Logger logger = Logger.getLogger("order.web.OrderManager"); logger.info("Removed order " + id + "."); Where do I see the log? Also this quote from java.util.logging.Logger library: On each logging call the Logger initially performs a cheap check of the request level (e.g. SEVERE or FINE) against the effective log level of the logger. If the request level is lower than the log level, the logging call returns immediately. After passing this initial (cheap) test, the Logger will allocate a LogRecord to describe the logging message. It will then call a Filter (if present) to do a more detailed check on whether the record should be published. If that passes it will then publish the LogRecord to its output Handlers. Does this mean that if I have 3 request level log: logger.log(Level.FINE, "Something"); logger.log(Level.WARNING, "Something"); logger.log(Level.SEVERE, "Something"); And my log level is SEVERE, I can see all three logs, if my log level is WARNING, then I cant see SEVERE log, is that correct? And how do I set the log level?

    Read the article

  • Cross-Origin Resource Sharing (CORS) - am I missing something here?

    - by David Semeria
    I was reading about CORS (https://developer.mozilla.org/en/HTTP_access_control) and I think the implementation is both simple and effective. However, unless I'm missing something, I think there's a big part missing from the spec. As I understand, it's the foreign site that decides, based on the origin of the request (and optionally including credentials), whether to allow access to its resources. This is fine. But what if malicious code on the page wants to POST a user's sensitive information to a foreign site? The foreign site is obviously going to authenticate the request. Hence, again if I'm not missing something, CORS actually makes it easier to steal sensitive information. I think it would have made much more sense if the original site could also supply an immutable list of servers its page is allowed to access. So the expanded sequence would be: 1) Supply a page with list of acceptable CORS servers (abc.com, xyz.com, etc) 2) Page wants to make an XHR request to abc.com - the browser allows this because it's in the allowed list and authentication proceeds as normal 3) Page wants to make an XHR request to malicious.com - request rejected locally (ie by the browser) because the server is not in the list. I know that malicious code could still use JSONP to do its dirty work, but I would have thought that a complete implementation of CORS would imply the closing of the script tag multi-site loophole. I also checked out the official CORS spec (http://www.w3.org/TR/cors) and could not find any mention of this issue.

    Read the article

  • Cleaner way of using modulus for columns

    - by WmasterJ
    I currently have a list (<ul>) of people that I have divided up into two columns. But after finishing the code for it I keept wondering if there is a more effective or clean way to do the same thing. echo "<table class='area_list'><tr>"; // Loop users within areas, divided up in 2 columns $count = count($areaArray); for($i=0 ; $i<$count ; $i++) { $uid = $areaArray[$i]; // get the modulus value + ceil for uneven numbers $rowCalc = ($i+1) % ceil($count/2); if ($rowCalc == 1) echo "<td><ul>"; // OUTPUT the actual list item echo "<li>{$users[$uid]->profile_lastname}</li>"; if ($rowCalc == 0 && $i!=0) echo "</ul></td>"; } echo "</tr></table>"; Any ideas of how to make this cleaner or do it in another way?

    Read the article

  • Void* array casting to float, int32, int16, etc.

    - by Griffin
    Hey guys, I've got an array of PCM data, it could be 16 bit, 24 bit packed, 32 bit, etc.. It could be signed, or unsigned, and it could be 32 or 64 bit floating point. It is currently stored as a "void**" matrix, indexed by channel, then by frame. The goal is to allow my library to take in any PCM format and buffer it, without requiring manipulation of the data to fit a designated structure. If the A/D converter spits out 24 bit packed arrays of interleaved PCM, I need to accept it gracefully. I also need to support 16 bit non interleaved, as well as any permutation of the above formats. I know the bit depth and other information at runtime, and I'm trying to code efficiently while not duplicating code. What I need is an effective way to cast the matrix, put PCM data into the matrix, and then pull it out later. I can cast the matrix to int32_t, or int16_t for the 32 and 16 bit signed PCM respectively, I'll probably have to store the 24 bit PCM in an int32_t for 32 bit, 8 bit byte systems as well. Can anyone recommend a good way to put data into this array, and pull it out later? I'd like to avoid large sections of code which look like: switch( mFormat ) { case 1: // unsigned 8 bit for( int i = 0; i < mChannels; i++ ) framesArray = (uint8_t*)pcm[i]; break; case 2: // signed 8 bit for( int i = 0; i < mChannels; i++ ) framesArray = (int8_t*)pcm[i]; break; case 3: // unsigned 16 bit ... Limitations: I'm working in C/C++, no templates, no RTTI, no STL. Think embedded. Things get trickier when I have to port this to a DSP with 16 bit bytes. Does anybody have any useful macros they might be willing to share? Thanks, -Griff

    Read the article

  • As an Agile Java developer, what should I be looking for when hiring a C++ developer?

    - by agoudzwaard
    I come from an effective team of Agile Java developers. We've had a lot of success in hiring more people like ourselves - people passionate about technology with experience primarily in the Agile Java/J2EE space. We're looking to hire our first C++ developer to serve as an on-shore resource for maintaining and adding to the C++ portion of our code base. Up until now the entirety of our C++ development has been done out of an off-shore location. We consider our interview process to be fairly thorough: A phone screen centered on Object-Oriented Programming and Java A non-trivial at-home code project using Java An in-person interview covering technical and behavioral competency We look for a demonstration of Agile best practices (expressive code, test-driven development, continuous integration) throughout the entire process, however there is a common conception that Agility is primarily practiced by Java developers. If we retrofit our interview process for C++, should we still expect Agile qualities when interviewing for a C++ role? I'm asking on behalf of a team that has worked with Java too long to know what a good C++ developer looks like. Specifically we're looking to answer the following questions: Can we expect a demonstrated understanding of OO design and Separation of Concerns? In the code project we want the candidate to write unit tests. Would a good C++ developer be surprised by this expectation? Are there any "extra" competencies we can look for? For example with Java developers we always look for a familiarity with Dependency Injection.

    Read the article

  • Windows 2008 VPS hosting experiences

    - by Luke Bennett
    Whilst similar questions exist, I couldn't find any which quite match my request. I'm looking for hosting for some personal .NET projects which for various reasons I do not want to host on our servers at work. I need to be able to host multiple sites and for that reason I'm thinking of a VPS with RDP access for the time being - don't fancy shared hosting as I feel that doesn't offer me the flexbility and control I'm looking for. What experiences do people have of Windows 2008 VPS providers? I've come across a few possibilities although it seems a lot of places are still on Windows 2003 with 2008 'coming soon'. Is VPS the best way to go? Eventually (depending on how the projects take off) I intend to get a dedicated box but at this stage it's not cost-effective. Also, what are people's experiences of running SQL Server Express on a VPS? What would you say the minimum requirements are for CPU/memory? I know it's not going to be anywhere near as performant as SQL Server 2005/8 running on a dedicated box but I'm hoping it will be an acceptable starting point. Any other tips/advice also welcome! Edit: Forgot to mention, I'm ideally looking for UK hosting although I'm open to alternatives.

    Read the article

  • What Test Environment Setup do Top Project Committers Use in the Ruby Community?

    - by viatropos
    Today I am going to get as far as I can setting up my testing environment and workflow. I'm looking for practical advice on how to setup the test environment from you guys who are very passionate and versed in Ruby Testing. By the end of the day (6am PST?) I would like to be able to: Type one 1-command to run test suites for ANY project I find on Github. Run autotest for ANY Github project so I can fork and make TESTABLE contributions. Build gems from the ground up with Autotest and Shoulda. For one reason or another, I hardly ever run tests for projects I clone from Github. The major reason is because unless they're using RSpec and have a Rake task to run the tests, I don't see the common pattern behind it all. I have built 3 or 4 gems writing tests with RSpec, and while I find the DSL fun, it's less than ideal because it just adds another layer/language of methods I have to learn and remember. So I'm going with Shoulda. But this isn't a question about which testing framework to choose. So the questions are: What is your, the SO reader and Github project committer, test environment setup using autotest so that whenever you git clone a gem, you can run the tests and autotest-develop them if desired? What are the guys who are writing the Paperclip Tests and Authlogic Tests doing? What is their setup? Thanks for the insight. Looking for answers that will make me a more effective tester.

    Read the article

  • Is there a better loop I could write to reduce database queries?

    - by dmanexe
    Below is some code I've written that is effective, but makes too many database queries. Is there a way I could optimize and reduce the number of queries but have conditional statements still be as effective as below? I pasted the code repeated a few times just for good measure. echo "<h3>Pool Packages</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Pool Packages") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Pool Packages") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Water Features</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Water Features") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Water Features") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Waterfall Rock Work</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE) { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Waterfall Rock Work") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Sheer Descents</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Sheer Descents") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Sheer Descents") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Booster Pump</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Booster Pump") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Booster Pump") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Pool Concrete Decking</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Pool Concrete Decking") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Pool Concrete Decking") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Solar Heating</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Solar Heating") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Solar Heating") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { } endforeach; echo "</ul>"; echo "<h3>Raised Bond Beam</h3>"; echo "<ul>"; foreach ($items as $item): $this->db->where('id', $item['id']); $query = $this->db->get('items')->row(); if ($item['quantity'] > 1 && $item['quantity'] == TRUE && $query->category == "Raised Bond Beam") { $newprice = $item['quantity'] * $query->price; $totals[] = $newprice; } else { $newprice = $query->price; $totals[] = $newprice; } if ($query->category == "Raised Bond Beam") { echo "<li>" . $query->name . " (QTY: " . $item['quantity'] . " x = " . str_ireplace(" ", "", money_format('%(#10n', $newprice)) . ")</li>"; } else { echo "<li>None</li>"; } endforeach; echo "</ul>"; It goes on beyond this to several more categories, but I don't know how to handle looping through this best. Thanks!

    Read the article

  • Memory Leakage using datatables

    - by Vix
    Hi, I have situation in which i'm compelled to retrieve 30,000 records each to 2 datatables.I need to do some manipulations and insert into records into the SQL server in Manipulate(dt1,dt2) function.I have to do this in 15 times as you can see in the for loop.Now I want to know what would be the effective way in terms of memory usage.I've used the first approach.Please suggest me the best approach. (1) for (int i = 0; i < 15; i++) { DataTable dt1 = GetInfo(i); DataTable dt2 = GetData(i); Manipulate(dt1,dt2); } (OR) (2) DataTable dt1 = new DataTable(); DataTable dt2 = new DataTable(); for (int i = 0; i < 15; i++) { dt1=null; dt2=null; dt1 = GetInfo(); dt2 = GetData(); Manipulate(dt1, dt2); } Thanks, Vix.

    Read the article

  • Recoverable error while running XSL

    - by Kate
    XSL: <?xml version="1.0" encoding="utf-8"?> <xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ve="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:r="http://schemas.openxmlformats.org/officeDocument/2006/relationships" xmlns:m="http://schemas.openxmlformats.org/officeDocument/2006/math" xmlns:v="urn:schemas-microsoft-com:vml" xmlns:wp="http://schemas.openxmlformats.org/drawingml/2006/wordprocessingDrawing" xmlns:w10="urn:schemas-microsoft-com:office:word" xmlns:w="http://schemas.openxmlformats.org/wordprocessingml/2006/main" xmlns:wne="http://schemas.microsoft.com/office/word/2006/wordml" exclude-result-prefixes="wp wne w10 w ve o r m v" version="2.0"> <xsl:output method="text"/> <xsl:param name="styleName"/> <xsl:template match="w:p"> <xsl:apply-templates/><xsl:text>&#10;</xsl:text> </xsl:template> <xsl:template match="w:r[not ((parent::w:hyperlink[@w:anchor[matches(.,concat('^(',$styleName,')')),'i']]))]"> <xsl:value-of select="replace(., '.', '&#xFF00;')"/> </xsl:template> </xsl:stylesheet> While processing the above XSL, I am getting the below error, Recoverable Error: Recoverable error on line 11 FORG0006: An error occurred matching pattern {w:r[not ((parent::w:hyperlink[@w:anchor[matches(.,concat('^(',$styleName,')')),'i']]))]}: Effective boolean value is not defined for a sequence of two or more items starting with a boolean Please Help. I am not able to figure out this.

    Read the article

  • best practices question: How to save a collection of images and a java object in a single file? File

    - by Richard
    Hi all, I am making a java program that has a collection of flash-card like objects. I store the objects in a jtree composed of defaultmutabletreenodes. Each node has a user object attached to it with has a few string/native data type parameters. However, i also want each of these objects to have an image (typical formats, jpg, png etc). I would like to be able to store all of this information, including the images and the tree data to the disk in a single file so the file can be transferred between users and the entire tree, including the images and parameters for each object, can be reconstructed. I had not approached a problem like this before so I was not sure what the best practices were. I found XLMEncoder (http://java.sun.com/j2se/1.4.2/docs/api/java/beans/XMLEncoder.html) to be a very effective way of storing my tree and the native data type information. However I couldn't figure out how to save the image data itself inside of the XML file, and I'm not sure it is possible since the data is binary (so restricted characters would be invalid). My next thought was to associate a hash string instead of an image within each user object, and then gzip together all of the images, with the hash strings as the names and the XMLencoded tree in the same compmressed file. That seemed really contrived though. Does anyone know a good approach for this type of issue? THanks! Thanks!

    Read the article

  • Best "Loading" feedback for ASP.Net?

    - by IP
    So, we have an ASP.Net application - fairly standard - and in there are lots of updatepanels, and postbacks. On some pages we have <ajax:UpdatePanelAnimationExtender ID="ae" runat="server" TargetControlID="updatePanel" BehaviorID="UpdateAnimation"> <Animations> <OnUpdating> <FadeOut Duration="0.1" minimumOpacity=".3" /> </OnUpdating> <OnUpdated> <FadeIn minimumOpacity=".5" Duration="0" /> </OnUpdated> </Animations> </ajax:UpdatePanelAnimationExtender> Which basically whites out the page when a postback is going on (but this clashes with modal dialog grey backgrounds). In some cases we have a progressupdate control which just has a spinny icon in the middle of the page. But none of them seem particularly nice and all a bit clunky. They also require a lot of code in various places around the app. What methods do other people use and find effective?

    Read the article

  • PHP - complete url parser help

    - by Mark
    I have been trying to find an effective url parser, php's own does not include subdomain or extension. On php.net a number of users had contributed and made this: function parseUrl($url) { $r = "^(?:(?P<scheme>\w+)://)?"; $r .= "(?:(?P<login>\w+):(?P<pass>\w+)@)?"; $r .= "(?P<host>(?:(?P<subdomain>[-\w\.]+)\.)?" . "(?P<domain>[-\w]+\.(?P<extension>\w+)))"; $r .= "(?::(?P<port>\d+))?"; $r .= "(?P<path>[\w/]*/(?P<file>\w+(?:\.\w+)?)?)?"; $r .= "(?:\?(?P<arg>[\w=&]+))?"; $r .= "(?:#(?P<anchor>\w+))?"; $r = "!$r!"; // Delimiters preg_match ( $r, $url, $out ); return $out; } Unfortunately it fails on paths with a '-' and I can't for the life of me workout how to amend it to accept '-' in the path name. Thanks

    Read the article

  • Index question: Select * with WHERE clause. Where and how to create index

    - by Mestika
    Hi, I’m working on optimizing some of my queries and I have a query that states: select * from SC where c_id ="+c_id” The schema of ** SC** looks like this: SC ( c_id int not null, date_start date not null, date_stop date not null, r_t_id int not null, nt int, t_p decimal, PRIMARY KEY (c_id, r_t_id, date_start, date_stop)); My immediate bid on how the index should be created is a covering index in this order: INDEX(c_id, date_start, date_stop, nt, r_t_id, t_p) The reason for this order I base on: The WHERE clause selects from c_id thus making it the first sorting order. Next, the date_start and date_stop to specify a sort of “range” to be defined in these parameters Next, nt because it will select the nt Next the r_t_id because it is a ID for a specific type of my r_t table And last the t_p because it is just a information. I don’t know if it is at all necessary to order it in a specific way when it is a SELECT ALL statement. I should say, that the SC is not the biggest table. I can say how many rows it contains but a estimate could be between <10 and 1000. The next thing to add is, that the SC, in different queries, inserts the data into the SC, and I know that indexes on tables which have insertions can be cost ineffective, but can I somehow create a golden middle way to effective this performance. Don't know if it makes a different but I'm using IBM DB2 version 9.7 database Sincerely Mestika

    Read the article

  • Tools for managing code deployment/versioning for IIS / Windows enviroments

    - by RizwanK
    I've got a strong background in Linux and OSX, and just left a job where I was architecting systems based on those platforms. Now I've got a Windows Server running IIS that has a number of different websites that it hosts. Most of them are just a bunch of HTML, JS and Images, with some ASP for some customer tools. (Each website has a different set of customer tools, or they are the same tools, but with minor code changes between them.) I'm also adding a develop web server with the same code, but the 'bleeding edge' stuff. I need an effective way of managing changes and updates to the overall codebase (henceforth referring to both the images and the html and the asp, for all the sites). When a dev (or webmaster) checks in changes, I want it to show up automatically on the developer server, but should be manually pushed out to the live server. I'd be tempted to just make the websites SVN repositories, but I'd be concerned about the overhead of having the webdeveloper having to log into the server and trigger an SVN update via commandline/tortise (and heaven forbid, manage tags). Ideally I'd also manage IIS profile settings between the systems, but the major need is to be able to manage the process, and expose it to our ASP developer, and our webmaster, both of which are used to just FTPing up the files to the live site. So, any recommendations on tools (beyond some SVN hacking with BAT files + teaching the webmaster how to log into the server and do updates) or workflows that would help this out? I even considered an RPM type package (or some Windows equivalent, of course) to manage the live server, but that seems like a bit too much overhead. Thanks.

    Read the article

< Previous Page | 499 500 501 502 503 504 505 506 507 508 509 510  | Next Page >