Search Results

Search found 94339 results on 3774 pages for 'system data'.

Page 505/3774 | < Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >

• Our embedded linux system won't recognize a USB Device if it is plugged in before powerup. Suggestions?

  - by Blaine

  We are developing on a small embedded device. This device us a gumstix overo board running OpenEmbedded linux. We have our development almost completely done, and have run into the strangest of bugs that we can't figure out. We have a USB Device (Spectrophotometer) that has a USB2.0 Connection and an external power supply for the light source. Typical behavior is that you plug in the power supply, then the USB connection to a host. When the usb connection is detected by the device, the device boots up and enables the light source and fan. The device is then able to be used by the host system. The problem is that if the device is plugged into the Gumstix before we turn on the Gumstix, the USB Device apparently is not probed by the system (and hence does not turn on). Under a normal situation, when the connection is initialized by plugging in the usb cable, the spectro turns itself on and becomes available to the system (this can be seen via "lsusb" typically). Neither of these things are happening. There is no device detected via "lsusb" and no dmesg errors of any kind that we can see. It is as if the device is not plugged in. The device does show up and work fine if we unplug the USB cable and plug it back in once the system is booted up. It turns on and shows up on the usb bus, and we can access it with our driver. On any other desktop or laptop, it does not matter if the host system is on or off when we plug in the spectrometer. This behavior is what I would consider to be "normal" - that the usb system is probed and initialized at boot time, and the usb devices come online. In other words, our system is fully functional as long as we plug in the usb device after the system is booted up. Unfortunately this isn't possible in our final product - everything comes on at once. Additional Info: 1) We have tried a flash drive attached to the system when the system is turned off. Booting up the system brings the flash drive online, as expected 2) There are no messages regarding the spectro or usb device (using dmesg). "lsusb" only lists the USB hubs / controllers. It is literally as if the device is not present and not plugged in. 3) We have tried a brand new image from gumstix and an older image from last year. Both images have this problem. This problem exists on all 3 gumstix devices we use. Does anyone have any suggestions? From what I can tell it isn't really possible to do a complete "reboot" of the usb system that is a complete emulation of "unplugging" and "replugging" a usb device. I feel like what is happening is that there is no initial probe on the usb bus that would trigger the usb handshaking, but this is somehow specific to the spectro. This seems to be a kernel issue or at least an issue in how the kernel is initializing the usb subsystem. I'm not really sure though. I have tried the gumstix mailing list, but there doesn't seem to be anyone who has seen this issue before. Any advice or suggestions on where to start looking would be fantastic. Thank you! Blaine output etc. $ uname -a Linux overo 2.6.33 #1 Tue Apr 27 08:35:38 PDT 2010 armv7l GNU/Linux When the system is up and running and spectro is plugged in (working as intended), this is lsusb: Bus 001 Device 116: ID 2457:1022 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x2457 idProduct 0x1022 bcdDevice 0.02 iManufacturer 1 USB4000 1.01.11 iProduct 2 Ocean Optics USB4000 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 46 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 4 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x86 EP 6 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) dmesg output: usb usb1: usb auto-resume hub 1-0:1.0: hub_resume usb usb2: usb auto-resume ehci-omap ehci-omap.0: resume root hub hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000 hub 2-0:1.0: hub_resume hub 2-0:1.0: state 7 ports 3 chg 0000 evt 0000 hub 1-0:1.0: hub_suspend usb usb1: bus auto-suspend hub 2-0:1.0: hub_suspend usb usb2: bus auto-suspend ehci-omap ehci-omap.0: suspend root hub usb usb2: usb resume ehci-omap ehci-omap.0: resume root hub hub 2-0:1.0: hub_resume ehci-omap ehci-omap.0: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 2-0:1.0: port 2: status 0501 change 0001 hub 2-0:1.0: state 7 ports 3 chg 0004 evt 0000 hub 2-0:1.0: port 2, status 0501, change 0000, 480 Mb/s ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: new high speed USB device using ehci-omap and address 2 ehci-omap ehci-omap.0: port 2 high speed ehci-omap ehci-omap.0: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT usb 2-2: default language 0x0409 usb 2-2: udev 2, busnum 2, minor = 129 usb 2-2: New USB device found, idVendor=2457, idProduct=1022 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-2: Product: Ocean Optics USB4000 usb 2-2: Manufacturer: USB4000 1.01.11 usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: uevent usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent drivers/usb/core/inode.c: creating file '002' dmesg has nothing to say, and lusb simply lists nothing else but the two default usb controllers / hubs if we plug the device in before the system is turned on.

  Read the article

• Parallelism in .NET – Part 1, Decomposition

  - by Reed

  The first step in designing any parallelized system is Decomposition.  Decomposition is nothing more than taking a problem space and breaking it into discrete parts.  When we want to work in parallel, we need to have at least two separate things that we are trying to run.  We do this by taking our problem and decomposing it into parts. There are two common abstractions that are useful when discussing parallel decomposition: Data Decomposition and Task Decomposition.  These two abstractions allow us to think about our problem in a way that helps leads us to correct decision making in terms of the algorithms we’ll use to parallelize our routine. To start, I will make a couple of minor points. I’d like to stress that Decomposition has nothing to do with specific algorithms or techniques.  It’s about how you approach and think about the problem, not how you solve the problem using a specific tool, technique, or library.  Decomposing the problem is about constructing the appropriate mental model: once this is done, you can choose the appropriate design and tools, which is a subject for future posts. Decomposition, being unrelated to tools or specific techniques, is not specific to .NET in any way.  This should be the first step to parallelizing a problem, and is valid using any framework, language, or toolset.  However, this gives us a starting point – without a proper understanding of decomposition, it is difficult to understand the proper usage of specific classes and tools within the .NET framework. Data Decomposition is often the simpler abstraction to use when trying to parallelize a routine.  In order to decompose our problem domain by data, we take our entire set of data and break it into smaller, discrete portions, or chunks.  We then work on each chunk in the data set in parallel. This is particularly useful if we can process each element of data independently of the rest of the data.  In a situation like this, there are some wonderfully simple techniques we can use to take advantage of our data.  By decomposing our domain by data, we can very simply parallelize our routines.  In general, we, as developers, should be always searching for data that can be decomposed. Finding data to decompose if fairly simple, in many instances.  Data decomposition is typically used with collections of data.  Any time you have a collection of items, and you’re going to perform work on or with each of the items, you potentially have a situation where parallelism can be exploited.  This is fairly easy to do in practice: look for iteration statements in your code, such as for and foreach. Granted, every for loop is not a candidate to be parallelized.  If the collection is being modified as it’s iterated, or the processing of elements depends on other elements, the iteration block may need to be processed in serial.  However, if this is not the case, data decomposition may be possible. Let’s look at one example of how we might use data decomposition.  Suppose we were working with an image, and we were applying a simple contrast stretching filter.  When we go to apply the filter, once we know the minimum and maximum values, we can apply this to each pixel independently of the other pixels.  This means that we can easily decompose this problem based off data – we will do the same operation, in parallel, on individual chunks of data (each pixel). Task Decomposition, on the other hand, is focused on the individual tasks that need to be performed instead of focusing on the data.  In order to decompose our problem domain by tasks, we need to think about our algorithm in terms of discrete operations, or tasks, which can then later be parallelized. Task decomposition, in practice, can be a bit more tricky than data decomposition.  Here, we need to look at what our algorithm actually does, and how it performs its actions.  Once we have all of the basic steps taken into account, we can try to analyze them and determine whether there are any constraints in terms of shared data or ordering.  There are no simple things to look for in terms of finding tasks we can decompose for parallelism; every algorithm is unique in terms of its tasks, so every algorithm will have unique opportunities for task decomposition. For example, say we want our software to perform some customized actions on startup, prior to showing our main screen.  Perhaps we want to check for proper licensing, notify the user if the license is not valid, and also check for updates to the program.  Once we verify the license, and that there are no updates, we’ll start normally.  In this case, we can decompose this problem into tasks – we have a few tasks, but there are at least two discrete, independent tasks (check licensing, check for updates) which we can perform in parallel.  Once those are completed, we will continue on with our other tasks. One final note – Data Decomposition and Task Decomposition are not mutually exclusive.  Often, you’ll mix the two approaches while trying to parallelize a single routine.  It’s possible to decompose your problem based off data, then further decompose the processing of each element of data based on tasks.  This just provides a framework for thinking about our algorithms, and for discussing the problem.

  Read the article

• Do You Know How OUM defines the four, basic types of business system testing performed on a project? Why not test your knowledge?

  - by user713452

  Testing is perhaps the most important process in the Oracle® Unified Method (OUM). That makes it all the more important for practitioners to have a common understanding of the various types of functional testing referenced in the method, and to use the proper terminology when communicating with each other about testing activities. OUM identifies four basic types of functional testing, which is sometimes referred to as business system testing.  The basic functional testing types referenced by OUM include: Unit Testing Integration Testing System Testing, and  Systems Integration Testing See if you can match the following definitions with the appropriate type above? A.  This type of functional testing is focused on verifying that interfaces/integration between the system being implemented (i.e. System under Discussion (SuD)) and external systems functions as expected. B.     This type of functional testing is performed for custom software components only, is typically performed by the developer of the custom software, and is focused on verifying that the several custom components developed to satisfy a given requirement (e.g. screen, program, report, etc.) interact with one another as designed. C.  This type of functional testing is focused on verifying that the functionality within the system being implemented (i.e. System under Discussion (SuD)), functions as expected.  This includes out-of-the -box functionality delivered with Commercial Off-The-Shelf (COTS) applications, as well as, any custom components developed to address gaps in functionality.  D.  This type of functional testing is performed for custom software components only, is typically performed by the developer of the custom software, and is focused on verifying that the individual custom components developed to satisfy a given requirement  (e.g. screen, program, report, etc.) functions as designed.   Check your answers below: (D) (B) (C) (A) If you matched all of the functional testing types to their definitions correctly, then congratulations!  If not, you can find more information in the Testing Process Overview and Testing Task Overviews in the OUM Method Pack.

  Read the article

• ASP.NET Hosting :: ASP.NET File Upload Control

  - by mbridge

  The asp.net FileUpload control allows a user to browse and upload files to the web server. From developers perspective, it is as simple as dragging and dropping the FileUpload control to the aspx page. An extra control, like a Button control, or some other control is needed, to actually save the file. <asp:FileUploadID="FileUpload1"runat="server"/> <asp:ButtonID="B1"runat="server"Text="Save"OnClick="B1_Click"/> By default, the FileUpload control allows a maximum of 4MB file to be uploaded and the execution timeout is 110 seconds. These properties can be changed from within the web.config file’s httpRuntime section. The maxRequestLength property determines the maximum file size that can be uploaded. The executionTimeout property determines the maximum time for execution. <httpRuntimemaxRequestLength="8192"executionTimeout="220"/> From code behind, the mime type, size of the file, file name and the extension of the file can be obtained. The maximum file size that can be uploaded can be obtained and modified using the System.Web.Configuration.HttpRuntimeSection class. Files can be alternatively saved using the System.IO.HttpFileCollection class. This collection class can be populated using the Request.Files property. The collection contains HttpPostedFile class which contains a reference to the class. using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; using System.IO; using System.Configuration; using System.Web.Configuration;   namespace WebApplication1 {     public partial class WebControls : System.Web.UI.Page     {         protected void Page_Load(object sender, EventArgs e)         {         }           //Using FileUpload control to upload and save files         protected void B1_Click(object sender, EventArgs e)         {             if (FileUpload1.HasFile && FileUpload1.PostedFile.ContentLength > 0)             {                 //mime type of the uploaded file                 string mimeType = FileUpload1.PostedFile.ContentType;                   //size of the uploaded file                 int size = FileUpload1.PostedFile.ContentLength; // bytes                   //extension of the uploaded file                 string extension = System.IO.Path.GetExtension(FileUpload1.FileName);                                  //save file                 string path = Server.MapPath("path");                                 FileUpload1.SaveAs(path + FileUpload1.FileName);                              }             //maximum file size allowed             HttpRuntimeSection rt = new HttpRuntimeSection();             rt.MaxRequestLength = rt.MaxRequestLength * 2;             int length = rt.MaxRequestLength;                     //execution timeout             TimeSpan ts = rt.ExecutionTimeout;             double secomds = ts.TotalSeconds;           }           //Using Request.Files to save files         private void AltSaveFile()         {             HttpFileCollection coll = Request.Files;             for (int i = 0; i < coll.Count; i++)             {                 HttpPostedFile file = coll[i];                   if (file.ContentLength > 0)                     ;//do something             }         }     } }

  Read the article

• Windows not recognizing its system drive after installing Ubuntu 11.10 alongside with windows 7. What to do?

  - by user53322

  After installing Ubuntu 11.10, it boots perfectly. But when I select Windows 7 from the GRUB menu, it restarts after showing the boot logo. I tried to repair the boot loader but the process failed. Then I decide to repair with system recovery disc. There I realize the system is unable to find any existing system. Then I boot into ubuntu and here I can see all the existing drive (with all content). All drives are still NTFS file system (I have 4 drive: 3 are NTFS another 1 is ext4). Tried to repair with gparted partition tool, but came with no luck. Also tried to reinstall windows but installer don't show any available drive. What to do? (something to do with Ubuntu?)

  Read the article

• strange data annotations issue in MVC 2

  - by femi

  Hello, I came across something strange when creating an edit form with MVC 2. i realised that my error messages come up on form sumission even when i have filled ut valid data! i am using a buddy class which i have configured correctly ( i know that cos i can see my custom errors). Here is the code from the viewmodel that generates this; <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl<TG_Careers.Models.Applicant>" %> <script src="/Scripts/MicrosoftAjax.js" type="text/javascript"></script> <script src="/Scripts/MicrosoftMvcAjax.js" type="text/javascript"></script> <script src="/Scripts/MicrosoftMvcValidation.js" type="text/javascript"></script> <%= Html.ValidationSummary() %> <% Html.EnableClientValidation(); %> <% using (Html.BeginForm()) {%> <div class="confirm-module"> <table cellpadding="4" cellspacing="2"> <tr> <td><%= Html.LabelFor(model => model.FirstName) %> </td> <td><%= Html.EditorFor(model => model.FirstName) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.FirstName) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.MiddleName) %></td> <td><%= Html.EditorFor(model => model.MiddleName) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.MiddleName) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.LastName) %></td> <td><%= Html.EditorFor(model => model.LastName) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.LastName) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.Gender) %></td> <td><%= Html.EditorFor(model => model.Gender) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.Gender) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.MaritalStatus) %></td> <td> <%= Html.EditorFor(model => model.MaritalStatus) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.MaritalStatus) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.DateOfBirth) %></td> <td><%= Html.EditorFor(model => model.DateOfBirth) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.DateOfBirth) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.Address) %></td> <td><%= Html.EditorFor(model => model.Address) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.Address) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.City) %></td> <td><%= Html.EditorFor(model => model.City) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.City) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.State) %></td> <td><%= Html.EditorFor(model => model.State) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.State) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.StateOfOriginID) %></td> <td><%= Html.DropDownList("StateOfOriginID", new SelectList(ViewData["States"] as IEnumerable, "StateID", "Name", Model.StateOfOriginID))%></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.StateOfOriginID) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.CompletedNYSC) %></td> <td><%= Html.EditorFor(model => model.CompletedNYSC) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.CompletedNYSC) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.YearsOfExperience) %></td> <td><%= Html.EditorFor(model => model.YearsOfExperience) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.YearsOfExperience) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.MobilePhone) %></td> <td><%= Html.EditorFor(model => model.MobilePhone) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.MobilePhone) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.DayPhone) %></td> <td> <%= Html.EditorFor(model => model.DayPhone) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.DayPhone) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.CVFileName) %></td> <td><%= Html.EditorFor(model => model.CVFileName) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.CVFileName) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.CurrentPosition) %></td> <td><%= Html.EditorFor(model => model.CurrentPosition) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.CurrentPosition) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.EmploymentCommenced) %></td> <td><%= Html.EditorFor(model => model.EmploymentCommenced) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.EmploymentCommenced) %></td> </tr> <tr> <td><%= Html.LabelFor(model => model.DateofTakingupCurrentPosition) %></td> <td><%= Html.EditorFor(model => model.DateofTakingupCurrentPosition) %></td> </tr> <tr> <td colspan="2"><%= Html.ValidationMessageFor(model => model.DateofTakingupCurrentPosition) %></td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td colspan="2">&nbsp;</td> </tr> </table> <p> <input type="submit" value="Save Profile Details" /> </p> </div> <% } %> Any ideas on this one please? Thanks

  Read the article

• Make a compiled binary run at native speed flawlessly without recompiling from source on a another system?

  - by unknownthreat

  I know that many people, at a first glance of the question, may immediately yell out "Java", but no, I know Java's qualities. Allow me to elaborate my question first. Normally, when we want our program to run at a native speed on a system, whether it be Windows, Mac OS X, or Linux, we need to compile from source codes. If you want to run a program of another system in your system, you need to use a virtual machine or an emulator. While these tools allow you to use the program you need on the non-native OS, they sometimes have problems of performance and glitches. We also have a newer compiler called "JIT Compiler", where the compiler will parse the bytecode program to native machine language before execution. The performance may increase to a very good extent with JIT Compiler, but the performance is still not the same as running it on a native system. Another program on Linux, WINE, is also a good tool for running Windows program on Linux system. I have tried running Team Fortress 2 on it, and tried experiment with some settings. I got ~40 fps on Windows at its mid-high setting on 1280 x 1024. On Linux, I need to turn everything low at 1280 x 1024 to get ~40 fps. There are 2 notable things though: Polygon model settings do not seem to affect framerate whether I set it low or high. When there are post-processing effects or some special effects that require manipulation of drawn pixels of the current frame, the framerate will drop to 10-20 fps. From this point, I can see that normal polygon rendering is just fine, but when it comes to newer rendering methods that requires graphic card to the job, it slows down to a crawl. Anyway, this question is rather theoretical. Is there anything we can do at all? I see that WINE can run STEAM and Team Fortress 2. Although there are flaws, they can run at lower setting. Or perhaps, I should also ask, "is it possible to translate one whole program on a system to another system without recompiling from source and get native speed?" I see that we also have AOT Compiler, is it possible to use it for something like this? Or there are so many constraints (such as DirectX call or differences in software architecture) that make it impossible to have a flawless and not native to the system program that runs at native speed?

  Read the article

• Is there a way to specify the culture when using System.Net.WebClient to read the contents of a page

  - by bubbassauro

  Is there a way to render a page with a specific culture using System.Net.WebClient? For example: System.Net.WebClient client = new System.Net.WebClient(); CultureInfo myCulture = System.Globalization.CultureInfo.GetCultureInfo("es-ES"); // Do something to specify the culture info client.DownloadString(someUrl);

  Read the article

• Does Ruby Version Manager interfere with the system scripts on Dream Linux?

  - by stephemurdoch

  Since Dream Linux has built in support for Ruby, I'm assuming it will work well as a Rails development environment, but I'm wondering if Ruby Version Manager will interfere with the system version of Ruby. Generally, when I use RVM, I disable/ignore the system version. How will the Dream Linux OS system scripts that are written in Ruby react to the presence of RVM? If I can't use RVM on Dream Linux, how easy is it to upgrade to newer versions of Ruby, without frazzling the system?

  Read the article

• Updated data is not loaded in the same browser(using Ajax )

  - by Mouli

  Initilly load some datas into dropdown list. It contain company code and company related fields in Textbox. Using Ajax to load the company related Fields in onchange Function I edit the company related fields and update it. Its updated Successfully then i Click the back button and refresh the browser. I select the updated company form the dropdown list. It always list the old value insted of updated data. I want to show the updated fields into corresponding textbox. This part of coding is to load the companyname into dropdown list <% DBAccess dbAccess = Util.initDatabaseAccess(); ResultSet rs = null; ResultSet rsEdit = null; int updateSuccess = 0; String button = request.getParameter("saveAction"); rs = dbAccess.executeQuery("select companyname,Companycode,companyid from yosemitecompany where cmpstatus=1 order by companyname"); %> My Ajax function <script> function showCompanyDetails(str) { if (str=="") { document.getElementById("CompanyName").innerHTML=""; return; } if (window.XMLHttpRequest) { xmlhttp=new XMLHttpRequest(); } else { xmlhttp=new ActiveXObject("Microsoft.XMLHTTP"); } xmlhttp.onreadystatechange=function() { if (xmlhttp.readyState==4 && xmlhttp.status==200) { var resValue=new Array(); resValue = xmlhttp.responseText.split("$"); document.getElementById("CompanyName").value=resValue[0]; document.getElementById("StreetName1").value=(resValue[1]!=null && !resValue[1].equalsIgnoreCase("null") && resValue[1].length>0?resValue[1]:""); document.getElementById("StreetName2").value=(resValue[2]!=null && !resValue[2].equalsIgnoreCase("null") && resValue[2].length>0?resValue[2]:""); document.getElementById("City").value=(resValue[3]!=null && !resValue[3].equalsIgnoreCase("null") && resValue[3].length>0?resValue[3]:""); document.getElementById("Zipcode").value=trim((resValue[5]!=null && !resValue[5].equalsIgnoreCase("null") && resValue[5].length>0?resValue[5]:"")); document.getElementById("officePhone").value=(resValue[6]!=null && !resValue[6].equalsIgnoreCase("null") && resValue[6].length>0?resValue[6]:""); document.getElementById("Fax1").value=(resValue[7]!=null && !resValue[7].equalsIgnoreCase("null") && resValue[7].length>0?resValue[7]:""); document.getElementById("email").value=(resValue[8]!=null && !resValue[8].equalsIgnoreCase("null") && resValue[8].length>0?resValue[8]:""); document.getElementById("WebSite").value=(resValue[9]!=null && !resValue[9].equalsIgnoreCase("null") && resValue[9].length>0?resValue[9]:""); document.getElementById("description").value=(resValue[10]!=null && !resValue[10].equalsIgnoreCase("null") && resValue[10].length>0?resValue[10]:""); document.getElementById("companycode").value=resValue[11]; document.getElementById("tempCompanyId").value=resValue[12]; document.getElementById("tempStateId").value=resValue[13]; stateID = resValue[13]; countryID = resValue[14]; processAjaxRequestPost('ajaxRequestPost','SingleListHandler','getCountryListDetails', document.getElementById("tempCompanyId").value); showTimezone(resValue[15]); document.getElementById("userName").value=resValue[16]; document.getElementById("passWord").value=resValue[17]; } } xmlhttp.open("GET","customerDetail.jsp?val="+str,true); xmlhttp.send(); } </script> My Update function <%if(updateSuccess <= 0){ if(button != null && button.equalsIgnoreCase("update")) { String companyCode = request.getParameter("companycode").trim(); String companyName = request.getParameter("CompanyName").trim(); String StreetName1 = request.getParameter("StreetName1").trim(); String StreetName2 = request.getParameter("StreetName2").trim(); String City = request.getParameter("City").trim(); String Zipcode = request.getParameter("Zipcode").trim(); String officePhone = request.getParameter("officePhone").trim(); String Fax1 = request.getParameter("Fax1").trim(); String email = request.getParameter("email").trim(); String WebSite = request.getParameter("WebSite").trim(); String description = request.getParameter("description").trim(); String companyid = request.getParameter("tempCompanyId").trim(); String stateId = request.getParameter("tempStateId").trim(); String timeZone = request.getParameter("timezone").trim(); String uploadCustomerLogo = request.getParameter("uploadCustomerLogo").trim(); String userName = request.getParameter("userName").trim(); String passWord = request.getParameter("passWord").trim(); String smtpInsertFlag = "NO"; String getCompanyId = null; updateSuccess = dbAccess.executeUpdate("update yosemitecompany set companyname='"+com.zoniac.util.Util.deQuoteForSingleQuote(companyName)+"', streetname1='"+com.zoniac.util.Util.deQuoteForSingleQuote(StreetName1)+"', streetname2='"+com.zoniac.util.Util.deQuoteForSingleQuote(StreetName2)+"', cityname='"+com.zoniac.util.Util.deQuoteForSingleQuote(City)+"', zipcode='"+com.zoniac.util.Util.deQuoteForSingleQuote(Zipcode)+"', phonenumber1='"+com.zoniac.util.Util.deQuoteForSingleQuote(officePhone)+"', fax1='"+com.zoniac.util.Util.deQuoteForSingleQuote(Fax1)+"', email1='"+com.zoniac.util.Util.deQuoteForSingleQuote(email)+"', website='"+com.zoniac.util.Util.deQuoteForSingleQuote(WebSite)+"', description='"+com.zoniac.util.Util.deQuoteForSingleQuote(description)+"',timezoneid="+timeZone+", stateid="+stateId+" where companyid='"+companyid+"'"); if(rs != null) { rs = null; dbAccess.close(); } } %> My customerDetail.jsp File <% String val = request.getParameter("val"); DBAccess dbAccess = Util.initDatabaseAccess(); ResultSet rs = null; String outputResult = null; String ff = "NO"; rs = dbAccess.executeQuery("select companyname,streetname1,streetname2,cityname,(select statename from state where stateid = (select stateid from yosemitecompany where companyid ="+val+"))as state,zipcode,phonenumber1,fax1,email1,website,description,companycode,companyid,(select stateid from state where stateid = (select stateid from yosemitecompany where companyid ="+val+"))as statecode,(select countryid from country where countryid =(select countryid from state where stateid = (select stateid from yosemitecompany where companyid ="+val+")))as countryid,timezoneid from yosemitecompany where companyid = "+val+""); if(rs.next()){ outputResult = rs.getString(1)+"$"+rs.getString(2)+"$"+rs.getString(3)+"$"+rs.getString(4)+"$"+rs.getString(5)+"$"+rs.getString(6)+"$"+rs.getString(7)+"$"+rs.getString(8)+"$"+rs.getString(9)+"$"+rs.getString(10)+"$"+rs.getString(11)+"$"+rs.getString(12)+"$"+rs.getString(13)+"$"+rs.getString(14)+"$"+rs.getString(15)+"$"+rs.getString(16); } rs = null; rs = dbAccess.executeQuery("select username,password from EMAILAUTHENTICATIONDETAILS where companyid="+val); if(rs.next()){ ff="YES"; outputResult += "$"+rs.getString(1)+"$"+rs.getString(2); } if(ff.equals("NO")){ outputResult += "$$"; } out.println(outputResult); outputResult = null; ff = "NO"; if(rs!=null) { rs = null; dbAccess.close(); } %>

  Read the article

• Post data to MVC3 controller without pagerefresh

  - by Smooth

  I have this script that basically has 4 select boxes, what I want is that for the 2 top select boxes, he submits the optionvalue that is selected to an action (which can be found at "ProductKoppeling/ProductKoppelingPartial"), I want to let him submit this data when I click on an option but without page refresh. I tried JSON and I tried Ajax, but I didn't get it working.. How should i do this? <script language="javascript" type="text/javascript"> function delete_1() { var answer = confirm("U staat op het punt dit product te verwijderen, wilt u doorgaan?") if (answer) { document.getElementById('Actie_1').value = '5'; document.getElementById('hpg_submit').submit(); } } function delete_2() { var answer = confirm("U staat op het punt dit product te verwijderen, wilt u doorgaan?") if (answer) { document.getElementById('Actie_2').value = '6'; document.getElementById('pg_submit').submit(); } } function delete_3() { var answer = confirm("U staat op het punt dit product te verwijderen, wilt u doorgaan?") if (answer) { document.getElementById('Actie_3').value = '6'; document.getElementById('p_submit').submit(); } } </script> <div style="width: 500px; float: left;"> @using (Html.BeginForm("ProductKoppelingPartial", "ProductKoppeling", FormMethod.Post, new { id = "onload_submit" })) { @Html.DropDownList("Klant.Id", (ViewBag.Klant as SelectList), new { onchange = "document.getElementById('onload_submit').submit()" }) } <div style="clear: both"></div> <div style="float: left;"> <b>Hoofdgroepen</b><br /> @using (Html.BeginForm("ProductKoppelingPartial", "ProductKoppeling", FormMethod.Post, new { id = "hpg_submit" })) { if (ViewBag.SelectedKlant != null) { <input type="hidden" name="Klant.Id" value="@ViewBag.SelectedKlant.Id" /> } <select style="width: 200px;" size="6" id="HoofdProductGroep" name="HoofdProductGroep.Id" onchange="document.getElementById('hpg_submit').submit();"> @foreach (var hpg in ViewBag.HoofdProductGroep) { if (ViewBag.SelectedHPG != null) { if (hpg.Id == ViewBag.SelectedHPG.Id) { <option value="@hpg.Id" selected="selected">@hpg.Naam</option> } else { <option value="@hpg.Id">@hpg.Naam</option> } } else { <option value="@hpg.Id">@hpg.Naam</option> } } </select> <input type="hidden" name="Actie" id="Actie_1" value="0" /> <br /> <img src="../../Content/toevoegen.png" style="cursor: pointer; width: 30px;" onclick="document.getElementById('Actie_1').value='1';document.getElementById('hpg_submit').submit();" /> <img src="../../Content/bewerken.png" style="cursor: pointer; float: none; width: 30px;" onclick="document.getElementById('Actie_1').value='2';document.getElementById('hpg_submit').submit();" /> <img src="../../Content/verwijderen.png" style="cursor: pointer; float: none; width: 30px;" onclick="delete_1()" /> } </div> <div style="float: right;"> <b>Groepen</b><br /> @using (Html.BeginForm("ProductKoppelingPartial", "ProductKoppeling", FormMethod.Post, new { id = "pg_submit" })) { if (ViewBag.SelectedHPG != null) { <input type="hidden" name="HoofdProductGroep.Id" value="@ViewBag.SelectedHPG.Id" /> } if (ViewBag.SelectedKlant != null) { <input type="hidden" name="Klant.Id" value="@ViewBag.SelectedKlant.Id" /> } <select size="6" style="width: 200px;" id="ProductGroep_Id" name="ProductGroep.Id" onchange="document.getElementById('pg_submit').submit();"> @foreach (var pg in ViewBag.ProductGroep) { if (ViewBag.SelectedPG != null) { if (pg.Id == ViewBag.SelectedPG.Id) { <option value="@pg.Id" selected="selected">@pg.Naam</option> } else { <option value="@pg.Id">@pg.Naam</option> } } else { <option value="@pg.Id">@pg.Naam</option> } } </select> <input type="hidden" name="Actie" id="Actie_2" value="0" /> <br /> <img src="../../Content/toevoegen.png" style="cursor: pointer; width: 30px;" onclick="document.getElementById('Actie_2').value='3';document.getElementById('pg_submit').submit();" /> <img src="../../Content/bewerken.png" style="cursor: pointer; float: none; width: 30px;" onclick="document.getElementById('Actie_2').value='4';document.getElementById('pg_submit').submit();" /> <img src="../../Content/verwijderen.png" style="cursor: pointer; float: none; width: 30px;" onclick="delete_2()" /> } </div> <div style="clear: both; height: 25px;"></div> @using (Html.BeginForm("Save", "ProductKoppeling", FormMethod.Post, new { id = "p_submit" })) { <div style="float: left"> <b>Producten</b><br /> <select size="18" style="width: 200px;" name="Product.Id"> @foreach (var p in ViewBag.Product) { <option value="@p.Id">@p.Naam</option> } </select> @if (ViewBag.SelectedPG != null) { if (ViewBag.SelectedPG.Id != null) { <input type="hidden" name="ProductGroep.Id" value="@ViewBag.SelectedPG.Id" /> } } <input type="hidden" name="Actie" id="Actie_3" value="0" /> <br /> <img src="../../Content/toevoegen.png" style="cursor: pointer; width: 30px;" onclick="document.getElementById('Actie_3').value='1';document.getElementById('p_submit').submit();" /> <img src="../../Content/bewerken.png" style="cursor: pointer; float: none; width: 30px;" onclick="document.getElementById('Actie_3').value='2';document.getElementById('p_submit').submit();" /> <img src="../../Content/verwijderen.png" style="cursor: pointer; float: none; width: 30px;" onclick="delete_3()" /> <br /> </div> <div style="float: left; width: 100px;"> <center> <br /><br /><br /><br /> <a style="cursor: pointer; float: none; color: blue; font-size: 30px;" onclick="document.getElementById('p_submit').submit();">»</a> <br /><br /><br /><br /><br /><br /><br /><br /><br /> <a style="cursor: pointer; float: none; color: blue; font-size: 30px;" onclick="document.getElementById('pgp_submit').submit();">«</a> </center> </div> } <div style="float: right;"> <b>Producten in groepen</b><br /> @using (Html.BeginForm("Delete", "ProductKoppeling", FormMethod.Post, new { id = "pgp_submit" })) { <select size="18" style="width: 200px;" name="ProductGroepProduct.Id"> @foreach (var pgp in ViewBag.ProductGroepProduct) { if (pgp != null) { if (pgp.Product != null) { <option value="@pgp.Id">@pgp.Product.Naam</option> } } } </select> } </div>

  Read the article

• Trying to add data to sql from link click and return results via jquery or ajax

  - by Jay Schires

  I am not familiar with jquery or ajax, but i do know it is whats needed to perform the action I want. I have created a wordpress plugin that updates a database table based on the users click. Right now it refreshes the page to return the results, but I want to stop the page refresh and return data via ajax I believe. If anyone is interested in helping me figure this out I would be very appreciative or even willing to pay. Thanks! Here is the plugin code: function BoardLikeItGetDelim($postid) { global $wp_rewrite; if($wp_rewrite->using_permalinks()) { if(isset($_GET['mbpost'])) return "?mbpost=".$postid."&"; return "?"; } else { if(isset($_GET['mbpost'])) return "&mbpost=".$postid."&"; return "&"; } } function AddBoardLikeItButton($postid) { global $user_ID; if(isset($_GET['board-like-it-action']) && $_GET['board-like-it-action'] == "like" && $_GET['bpid'] == $postid) BoardLikeItLike($user_ID, $_GET['bpid']); if(isset($_GET['board-like-it-action']) && $_GET['board-like-it-action'] == "unlike" && $_GET['bpid'] == $postid) BoardLikeItUnLike($user_ID, $_GET['bpid']); $num_likes = BoardLikeItGetNumLikes($postid); if(!BoardLikeItIsLiked($user_ID, $postid)) echo "<HREF LINK='".BoardLikeItGetDelim($postid)."board-like-it-action=like&bpid=".$postid."#mngl-board-post-message-".$postid."'>Like</a> ".$num_likes."" . "<br/>"; else echo "<HREF LINK ='".BoardLikeItGetDelim($postid)."board-like-it-action=unlike&bpid=".$postid."#mngl-board-post-message-".$postid."'>Un-Like</a> " . "<br/><span style='display: inline-block; padding: 0px; bottom: -5px; position: relative; border: 0px;'><IMAGE='". get_bloginfo('wpurl')."/wp-content/plugins/board-like-it/top-up.png' /></span><div style='-moz-border-radius: 4px; -khtml-border-radius: 4px; -webkit-border-radius: 4px; font-family: Verdana, Geneva, sans-serif; font-size: 10px; color: #000; background-color: #B8C9DB; width: 90%; margin: 0px; display: block; padding-top: 4px; padding-right: 5px; padding-bottom: 4px; padding-left: 6px;'>" . "<IMAGE='". get_bloginfo('wpurl')."/wp-content/plugins/board-like-it/thumb_up.png'/> " .BoardLikeItShowLikers($postid). "like this." . "</div>"; } function BoardLikeItShowLikers($postid) { global $wpdb; $result = $wpdb->get_var($wpdb->prepare("SELECT `likers` FROM ".BoardLikeItGetDBName()." WHERE `mngl_id` = {$postid}")); $results = explode(',', $result); $names = ""; if($results[0] != "") foreach($results as $r) { $userinfo = get_usermeta($r, 'user_login'); $names .= $userinfo.", "; } return $names; } function BoardLikeItGetNumLikes($postid) { global $wpdb; $result = $wpdb->get_var($wpdb->prepare("SELECT `likers` FROM ".BoardLikeItGetDBName()." WHERE `mngl_id` = {$postid}")); $results = explode(',', $result); if($results[0] != '') return count($results)."<br/><span style='display: inline-block; padding: 0px; bottom: -5px; position: relative; border: 0px;'><IMAGE='". get_bloginfo('wpurl')."/wp-content/plugins/board-like-it/top-up.png' /></span><div style='-moz-border-radius: 4px; -khtml-border-radius: 4px; -webkit-border-radius: 4px; font-family: Verdana, Geneva, sans-serif; font-size: 10px; color: #000; background-color: #B8C9DB; width: 90%; margin: 0px; display: inline-block; border: 0px; padding-top: 0px; padding-right: 5px; padding-bottom: 1px; padding-left: 6px;'>" . "<IMAGE='". get_bloginfo('wpurl')."/wp-content/plugins/board-like-it/thumb_up.png'/> " .BoardLikeItShowLikers($postid). "likes this." . "</div>"; else return ""; } function BoardLikeItLike($user_ID, $postid) { global $wpdb; $likers = array(); $likersnew = array(); $result = $wpdb->get_var($wpdb->prepare("SELECT `likers` FROM ".BoardLikeItGetDBName()." WHERE `mngl_id` = {$postid}")); $results = explode(',',$result); if($results[0] != "") { if(!in_array($user_ID, $results)) $results[] = $user_ID; $likers = implode(',',$results); $wpdb->query($wpdb->prepare("UPDATE ".BoardLikeItGetDBName()." SET `likers` = '{$likers}' WHERE `mngl_id` = {$postid}")); } else { $likersnew[] = $user_ID; $likersnew = implode(',',$likersnew); $wpdb->query($wpdb->prepare("INSERT INTO ".BoardLikeItGetDBName()." (`mngl_id`, `likers`) VALUES ('{$postid}', '{$likersnew}')")); } } function BoardLikeItUnLike($user_ID, $postid) { global $wpdb; $likers = array(); $result = $wpdb->get_var($wpdb->prepare("SELECT `likers` FROM ".BoardLikeItGetDBName()." WHERE `mngl_id` = {$postid}")); $results = explode(',', $result); if(in_array($user_ID, $results)) { $results = BoardLikeItRemoveFromArray($results, $user_ID); if(!empty($results)) { $likers = implode(',', $results); $wpdb->query($wpdb->prepare("UPDATE ".BoardLikeItGetDBName()." SET `likers` = '{$likers}' WHERE `mngl_id` = {$postid}")); } else { $wpdb->query($wpdb->prepare("DELETE FROM ".BoardLikeItGetDBName()." WHERE `mngl_id` = {$postid}")); } } } function BoardLikeItIsLiked($user_ID, $postid) { global $wpdb; $result = $wpdb->get_var($wpdb->prepare("SELECT `likers` FROM ".BoardLikeItGetDBName()." WHERE `mngl_id` = {$postid}")); $results = explode(',', $result); if(in_array($user_ID, $results)) return true; else return false; } function BoardLikeItActivate() { global $wpdb; $charset_collate = ''; if($wpdb->has_cap('collation')) { if(!empty($wpdb->charset)) $charset_collate = "DEFAULT CHARACTER SET $wpdb->charset"; if(!empty($wpdb->collate)) $charset_collate .= " COLLATE $wpdb->collate"; } $table_sql = "CREATE TABLE ".BoardLikeItGetDBName()."( `mngl_id` int(11) NOT NULL, `likers` longtext NOT NULL, PRIMARY KEY (`mngl_id`)) {$charset_collate};"; require_once(ABSPATH.'wp-admin/includes/upgrade.php'); dbDelta($table_sql); } function BoardLikeItGetDBName() { global $wpdb; return $wpdb->prefix."board_like_it"; } function BoardLikeItRemoveFromArray($arr, $key) { $new = array(); foreach($arr as $j => $i) { if($i != $key) $new[] = $i; } return $new; }

  Read the article

• Can we use SharePoint 2010 with Virtual PC in 32-bit Operting System?

  - by JanardhanReddy

  hi all, i want to install SharePoint 2010 in my system.but my system is 32-bit where SharePoint 2010 is 64-bit.So can we use Virtual PC to use SharePoint 2010 in my System.is it Possible ? Please tell me how can i use SharePoint 2010 in my 32-bit System? thanks in advance.

  Read the article

• ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

  - by ewwhite

  I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

  Read the article

• ZFS - destroying deduplicated zvol or data set stalls the server. How to recover?

  - by ewwhite

  I'm using Nexentastor on a secondary storage server running on an HP ProLiant DL180 G6 with 12 Midline (7200 RPM) SAS drives. The system has an E5620 CPU and 8GB RAM. There is no ZIL or L2ARC device. Last week, I created a 750GB sparse zvol with dedup and compression enabled to share via iSCSI to a VMWare ESX host. I then created a Windows 2008 file server image and copied ~300GB of user data to the VM. Once happy with the system, I moved the virtual machine to an NFS store on the same pool. Once up and running with my VMs on the NFS datastore, I decided to remove the original 750GB zvol. Doing so stalled the system. Access to the Nexenta web interface and NMC halted. I was eventually able to get to a raw shell. Most OS operations were fine, but the system was hanging on the zfs destroy -r vol1/filesystem command. Ugly. I found the following two OpenSolaris bugzilla entries and now understand that the machine will be bricked for an unknown period of time. It's been 14 hours, so I need a plan to be able to regain access to the server. http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6924390 and http://bugs.opensolaris.org/bugdatabase/view_bug.do;jsessionid=593704962bcbe0743d82aa339988?bug_id=6924824 In the future, I'll probably take the advice given in one of the buzilla workarounds: Workaround Do not use dedupe, and do not attempt to destroy zvols that had dedupe enabled. Update: I had to force the system to power off. Upon reboot, the system stalls at Importing zfs filesystems. It's been that way for 2 hours now.

  Read the article

• Convert raw IMAP server data into local folders, then upload partial dataset to new IMAP server?

  - by Manca Weeks

  I am transitioning a company with about 30 IMAP accounts, loaded with data (about 77GB total), to a new email host. The majority of the data will be converted into a local archive and distributed to the company computers as a static reference data set. The server side folders the users absolutely cannot do without being on the server will be uploaded back to the new server. I used Mac OS X Mail (Snow Leopard 10.6.6) to download the content. I notice some messages have the name [xxx].partial.emlx, which leads me to believe they have not been downloaded all the way. I have root access to the mail server data and could download the IMAP server data via FTP. I am not sure what utility to use to convert that data to local Mail.app mailboxes. Furthermore, I would appreciate any input on the best way to upload a portion of the data to the new server (GoDaddy), preserving the original dates of the messages. edit OK - forget the raw server data. I found a script that apparently does pretty good archiving IMAP folders to local mbx files. My main quest now is to batch upload a mailbox hierarchy to the new IMAP server without having to start-stop and deal with similar issues. Anyone know of a utility (hopefully for OS X, but if not, I'll fire up my XP virtual system...) that would be capable of this? Thanks, M

  Read the article

• Is it the address bus size or the data bus size that determines "8-bit , 16-bit ,32-bit ,64-bit " systems?

  - by learner

  My simple understanding is as follows. Memory (RAM) is composed of bits, groups of 8 which form bytes, each of which can be addressed ,and hence byte addressable memory. Address Bus stores the location of a byte of memory. If an address bus is of size 32 bits, that means it can hold upto 232 numbers and it hence can refer upto 232 bytes of memory = 4GB of memory and any memory greater than that is useless. Data bus is used to send the value to be written to/read off the memory. If I have a data bus of size 32 bits, it means a maximum of 4 bytes can be written to/read off the memory at a time. I find no relation between this size and the maximum memory size possible. But I read here that: Even though most systems are byte-addressable, it makes sense for the processor to move as much data around as possible. This is done by the data bus, and the size of the data bus is where the names 8-bit system, 16-bit system, 32-bit system, 64-bit system, etc.. come from. When the data bus is 8 bits wide, it can transfer 8 bits in a single memory operation. When the data bus is 32 bits wide (as is most common at the time of writing), at most, 32 bits can be moved in a single memory operation. This says that the size of the data bus is what gives an OS the name, 8bit, 16bit and so on. What is wrong with my understanding?

  Read the article

• Looking for suitable backup solution Mac OS X to offsite Centos 6 server 1TB of working data

  - by Brady

  I'll start by saying what we have in place currently: On site file server (Mac OS X Server) that is used by GFX designers and they have a working 1TB of data. Offsite server with 2TB available storage (Centos 6) Mac OS X server rsync data to offsite server every 6 hours (rsync -avz --delete --progress -e ssh ...) Mac OS X server does full data backup to LTO 4 tape on a 10 day recycle (Mon-Fri for 2 weeks) rsync pushes about 60GB of file changes a day. The problem: The onsite tape backup is failing as 1TB of graphics files don't compress well to fit onto a 800GB LTO4 tape. Backup is incredibly slow doing a full backup. Pain in the backside getting people to remember to change the tape. Often gets forgotten etc The quick solution: Buy LTO5 Drive and tapes. However this has been turned down because of the cost... What I would like: Something that works in the same way rysnc works. Only changed data is sent over the wire and can be scheduled to run multiple times during the day. Data that is sent is compressed and sent over SSH. Something that keeps a 14day retention but doesn't keep duplicate data So as an example if I have 1TB of working data and 60GB of changes are made each day then I expect around 1.84TB of data to be stored on the offsite server. To work with the Mac OS X server and Centos 6 server. Not cost an arm and a leg. Must be a cheaper solution than buying an LTO5 drive with tapes (around £1500). Be able to be setup to run autonomously. Have some sort of control panel that will allow an admin to easily restore a file/folder. Any recommendations?

  Read the article

• Find out CRC or CHECKSUM of RS232 data

  - by Carlos Alloatti

  I need to communicate with a RS232 device, I have no specs or information available. I send a 16 byte command and get a 16 byte result back. The last byte looks like some kind of crc or checksum, I have tried using this http://miscel.dk/MiscEl/miscelCRCandChecksum.html with no luck. Anyone can reverse engineer the crc/checksum algorithm? here is some data captured with an RS-232 monitor program: 01 80 42 00 00 00 00 00 00 00 00 00 00 00 01 B3 01 80 42 00 00 00 00 00 00 00 00 00 00 00 02 51 01 80 42 00 00 00 00 00 00 00 00 00 00 00 03 0F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 04 8C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 05 D2 01 80 42 00 00 00 00 00 00 00 00 00 00 00 06 30 01 80 42 00 00 00 00 00 00 00 00 00 00 00 07 6E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 08 2F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 09 71 01 80 42 00 00 00 00 00 00 00 00 00 00 00 0A 93 01 80 42 00 00 00 00 00 00 00 00 00 00 00 0B CD 01 80 42 00 00 00 00 00 00 00 00 00 00 00 0C 4E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 0D 10 01 80 42 00 00 00 00 00 00 00 00 00 00 00 0E F2 01 80 42 00 00 00 00 00 00 00 00 00 00 00 0F AC 01 80 42 00 00 00 00 00 00 00 00 00 00 00 10 70 01 80 42 00 00 00 00 00 00 00 00 00 00 00 11 2E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 12 CC 01 80 42 00 00 00 00 00 00 00 00 00 00 00 13 92 01 80 42 00 00 00 00 00 00 00 00 00 00 00 14 11 01 80 42 00 00 00 00 00 00 00 00 00 00 00 15 4F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 16 AD 01 80 42 00 00 00 00 00 00 00 00 00 00 00 17 F3 01 80 42 00 00 00 00 00 00 00 00 00 00 00 18 B2 01 80 42 00 00 00 00 00 00 00 00 00 00 00 19 EC 01 80 42 00 00 00 00 00 00 00 00 00 00 00 1A 0E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 1B 50 01 80 42 00 00 00 00 00 00 00 00 00 00 00 1C D3 01 80 42 00 00 00 00 00 00 00 00 00 00 00 1D 8D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 1E 6F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 1F 31 01 80 42 00 00 00 00 00 00 00 00 00 00 00 20 CE 01 80 42 00 00 00 00 00 00 00 00 00 00 00 21 90 01 80 42 00 00 00 00 00 00 00 00 00 00 00 22 72 01 80 42 00 00 00 00 00 00 00 00 00 00 00 23 2C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 24 AF 01 80 42 00 00 00 00 00 00 00 00 00 00 00 25 F1 01 80 42 00 00 00 00 00 00 00 00 00 00 00 26 13 01 80 42 00 00 00 00 00 00 00 00 00 00 00 27 4D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 28 0C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 29 52 01 80 42 00 00 00 00 00 00 00 00 00 00 00 2A B0 01 80 42 00 00 00 00 00 00 00 00 00 00 00 2B EE 01 80 42 00 00 00 00 00 00 00 00 00 00 00 2C 6D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 2D 33 01 80 42 00 00 00 00 00 00 00 00 00 00 00 2E D1 01 80 42 00 00 00 00 00 00 00 00 00 00 00 2F 8F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 30 53 01 80 42 00 00 00 00 00 00 00 00 00 00 00 31 0D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 32 EF 01 80 42 00 00 00 00 00 00 00 00 00 00 00 33 B1 01 80 42 00 00 00 00 00 00 00 00 00 00 00 34 32 01 80 42 00 00 00 00 00 00 00 00 00 00 00 35 6C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 36 8E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 37 D0 01 80 42 00 00 00 00 00 00 00 00 00 00 00 38 91 01 80 42 00 00 00 00 00 00 00 00 00 00 00 39 CF 01 80 42 00 00 00 00 00 00 00 00 00 00 00 3A 2D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 3B 73 01 80 42 00 00 00 00 00 00 00 00 00 00 00 3C F0 01 80 42 00 00 00 00 00 00 00 00 00 00 00 3D AE 01 80 42 00 00 00 00 00 00 00 00 00 00 00 3E 4C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 3F 12 01 80 42 00 00 00 00 00 00 00 00 00 00 00 40 AB 01 80 42 00 00 00 00 00 00 00 00 00 00 00 41 F5 01 80 42 00 00 00 00 00 00 00 00 00 00 00 42 17 01 80 42 00 00 00 00 00 00 00 00 00 00 00 43 49 01 80 42 00 00 00 00 00 00 00 00 00 00 00 44 CA 01 80 42 00 00 00 00 00 00 00 00 00 00 00 45 94 01 80 42 00 00 00 00 00 00 00 00 00 00 00 46 76 01 80 42 00 00 00 00 00 00 00 00 00 00 00 47 28 01 80 42 00 00 00 00 00 00 00 00 00 00 00 48 69 01 80 42 00 00 00 00 00 00 00 00 00 00 00 49 37 01 80 42 00 00 00 00 00 00 00 00 00 00 00 4A D5 01 80 42 00 00 00 00 00 00 00 00 00 00 00 4B 8B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 4C 08 01 80 42 00 00 00 00 00 00 00 00 00 00 00 4D 56 01 80 42 00 00 00 00 00 00 00 00 00 00 00 4E B4 01 80 42 00 00 00 00 00 00 00 00 00 00 00 4F EA 01 80 42 00 00 00 00 00 00 00 00 00 00 00 50 36 01 80 42 00 00 00 00 00 00 00 00 00 00 00 51 68 01 80 42 00 00 00 00 00 00 00 00 00 00 00 52 8A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 53 D4 01 80 42 00 00 00 00 00 00 00 00 00 00 00 54 57 01 80 42 00 00 00 00 00 00 00 00 00 00 00 55 09 01 80 42 00 00 00 00 00 00 00 00 00 00 00 56 EB 01 80 42 00 00 00 00 00 00 00 00 00 00 00 57 B5 01 80 42 00 00 00 00 00 00 00 00 00 00 00 58 F4 01 80 42 00 00 00 00 00 00 00 00 00 00 00 59 AA 01 80 42 00 00 00 00 00 00 00 00 00 00 00 5A 48 01 80 42 00 00 00 00 00 00 00 00 00 00 00 5B 16 01 80 42 00 00 00 00 00 00 00 00 00 00 00 5C 95 01 80 42 00 00 00 00 00 00 00 00 00 00 00 5D CB 01 80 42 00 00 00 00 00 00 00 00 00 00 00 5E 29 01 80 42 00 00 00 00 00 00 00 00 00 00 00 5F 77 01 80 42 00 00 00 00 00 00 00 00 00 00 00 60 88 01 80 42 00 00 00 00 00 00 00 00 00 00 00 61 D6 01 80 42 00 00 00 00 00 00 00 00 00 00 00 62 34 01 80 42 00 00 00 00 00 00 00 00 00 00 00 63 6A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 64 E9 01 80 42 00 00 00 00 00 00 00 00 00 00 00 65 B7 01 80 42 00 00 00 00 00 00 00 00 00 00 00 66 55 01 80 42 00 00 00 00 00 00 00 00 00 00 00 67 0B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 68 4A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 69 14 01 80 42 00 00 00 00 00 00 00 00 00 00 00 6A F6 01 80 42 00 00 00 00 00 00 00 00 00 00 00 6B A8 01 80 42 00 00 00 00 00 00 00 00 00 00 00 6C 2B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 6D 75 01 80 42 00 00 00 00 00 00 00 00 00 00 00 6E 97 01 80 42 00 00 00 00 00 00 00 00 00 00 00 6F C9 01 80 42 00 00 00 00 00 00 00 00 00 00 00 70 15 01 80 42 00 00 00 00 00 00 00 00 00 00 00 71 4B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 72 A9 01 80 42 00 00 00 00 00 00 00 00 00 00 00 73 F7 01 80 42 00 00 00 00 00 00 00 00 00 00 00 74 74 01 80 42 00 00 00 00 00 00 00 00 00 00 00 75 2A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 76 C8 01 80 42 00 00 00 00 00 00 00 00 00 00 00 77 96 01 80 42 00 00 00 00 00 00 00 00 00 00 00 78 D7 01 80 42 00 00 00 00 00 00 00 00 00 00 00 79 89 01 80 42 00 00 00 00 00 00 00 00 00 00 00 7A 6B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 7B 35 01 80 42 00 00 00 00 00 00 00 00 00 00 00 7C B6 01 80 42 00 00 00 00 00 00 00 00 00 00 00 7D E8 01 80 42 00 00 00 00 00 00 00 00 00 00 00 7E 0A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 7F 54 01 80 42 00 00 00 00 00 00 00 00 00 00 00 80 61 01 80 42 00 00 00 00 00 00 00 00 00 00 00 81 3F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 82 DD 01 80 42 00 00 00 00 00 00 00 00 00 00 00 83 83 01 80 42 00 00 00 00 00 00 00 00 00 00 00 84 00 01 80 42 00 00 00 00 00 00 00 00 00 00 00 85 5E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 86 BC 01 80 42 00 00 00 00 00 00 00 00 00 00 00 87 E2 01 80 42 00 00 00 00 00 00 00 00 00 00 00 88 A3 01 80 42 00 00 00 00 00 00 00 00 00 00 00 89 FD 01 80 42 00 00 00 00 00 00 00 00 00 00 00 8A 1F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 8B 41 01 80 42 00 00 00 00 00 00 00 00 00 00 00 8C C2 01 80 42 00 00 00 00 00 00 00 00 00 00 00 8D 9C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 8E 7E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 8F 20 01 80 42 00 00 00 00 00 00 00 00 00 00 00 90 FC 01 80 42 00 00 00 00 00 00 00 00 00 00 00 91 A2 01 80 42 00 00 00 00 00 00 00 00 00 00 00 92 40 01 80 42 00 00 00 00 00 00 00 00 00 00 00 93 1E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 94 9D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 95 C3 01 80 42 00 00 00 00 00 00 00 00 00 00 00 96 21 01 80 42 00 00 00 00 00 00 00 00 00 00 00 97 7F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 98 3E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 99 60 01 80 42 00 00 00 00 00 00 00 00 00 00 00 9A 82 01 80 42 00 00 00 00 00 00 00 00 00 00 00 9B DC 01 80 42 00 00 00 00 00 00 00 00 00 00 00 9C 5F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 9D 01 01 80 42 00 00 00 00 00 00 00 00 00 00 00 9E E3 01 80 42 00 00 00 00 00 00 00 00 00 00 00 9F BD 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A0 42 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A1 1C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A2 FE 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A3 A0 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A4 23 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A5 7D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A6 9F 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A7 C1 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A8 80 01 80 42 00 00 00 00 00 00 00 00 00 00 00 A9 DE 01 80 42 00 00 00 00 00 00 00 00 00 00 00 AA 3C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 AB 62 01 80 42 00 00 00 00 00 00 00 00 00 00 00 AC E1 01 80 42 00 00 00 00 00 00 00 00 00 00 00 AD BF 01 80 42 00 00 00 00 00 00 00 00 00 00 00 AE 5D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 AF 03 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B0 DF 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B1 81 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B2 63 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B3 3D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B4 BE 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B5 E0 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B6 02 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B7 5C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B8 1D 01 80 42 00 00 00 00 00 00 00 00 00 00 00 B9 43 01 80 42 00 00 00 00 00 00 00 00 00 00 00 BA A1 01 80 42 00 00 00 00 00 00 00 00 00 00 00 BB FF 01 80 42 00 00 00 00 00 00 00 00 00 00 00 BC 7C 01 80 42 00 00 00 00 00 00 00 00 00 00 00 BD 22 01 80 42 00 00 00 00 00 00 00 00 00 00 00 BE C0 01 80 42 00 00 00 00 00 00 00 00 00 00 00 BF 9E 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C0 27 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C1 79 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C2 9B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C3 C5 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C4 46 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C5 18 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C6 FA 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C7 A4 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C8 E5 01 80 42 00 00 00 00 00 00 00 00 00 00 00 C9 BB 01 80 42 00 00 00 00 00 00 00 00 00 00 00 CA 59 01 80 42 00 00 00 00 00 00 00 00 00 00 00 CB 07 01 80 42 00 00 00 00 00 00 00 00 00 00 00 CC 84 01 80 42 00 00 00 00 00 00 00 00 00 00 00 CD DA 01 80 42 00 00 00 00 00 00 00 00 00 00 00 CE 38 01 80 42 00 00 00 00 00 00 00 00 00 00 00 CF 66 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D0 BA 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D1 E4 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D2 06 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D3 58 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D4 DB 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D5 85 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D6 67 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D7 39 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D8 78 01 80 42 00 00 00 00 00 00 00 00 00 00 00 D9 26 01 80 42 00 00 00 00 00 00 00 00 00 00 00 DA C4 01 80 42 00 00 00 00 00 00 00 00 00 00 00 DB 9A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 DC 19 01 80 42 00 00 00 00 00 00 00 00 00 00 00 DD 47 01 80 42 00 00 00 00 00 00 00 00 00 00 00 DE A5 01 80 42 00 00 00 00 00 00 00 00 00 00 00 DF FB 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E0 04 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E1 5A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E2 B8 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E3 E6 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E4 65 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E5 3B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E6 D9 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E7 87 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E8 C6 01 80 42 00 00 00 00 00 00 00 00 00 00 00 E9 98 01 80 42 00 00 00 00 00 00 00 00 00 00 00 EA 7A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 EB 24 01 80 42 00 00 00 00 00 00 00 00 00 00 00 EC A7 01 80 42 00 00 00 00 00 00 00 00 00 00 00 ED F9 01 80 42 00 00 00 00 00 00 00 00 00 00 00 EE 1B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 EF 45 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F0 99 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F1 C7 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F2 25 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F3 7B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F4 F8 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F5 A6 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F6 44 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F7 1A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F8 5B 01 80 42 00 00 00 00 00 00 00 00 00 00 00 F9 05 01 80 42 00 00 00 00 00 00 00 00 00 00 00 FA E7 01 80 42 00 00 00 00 00 00 00 00 00 00 00 FB B9 01 80 42 00 00 00 00 00 00 00 00 00 00 00 FC 3A 01 80 42 00 00 00 00 00 00 00 00 00 00 00 FD 64 01 80 42 00 00 00 00 00 00 00 00 00 00 00 FE 86 01 80 42 00 00 00 00 00 00 00 00 00 00 00 FF D8 The second to last byte seems to be a sequential number that starts over at 00 when it reaches FF. I have included the whole range from 00 to FF to make it easier to guess the crc/checksum method.

  Read the article

• Pass data from one form to another on a seperate page

  - by Micanio

  I am building a price/distance calculator with Google Maps API and am trying to pass the info from the calculator to a booking form on a separate page. My first form has 2 submit buttons - one to make the calculation, and one to submit the relevant data to the booking form. I'm stuck trying to make the 2nd button work. Once the API calculation has been made, I get 4 values - From, To, Cost, Distance. I am trying to pass the From, To and Cost values into my booking form by clicking the second button. But I can;t seem to get it to work. I've tried POST and GET but I think I may have been doing something wrong with both. Any help is appreciated. Code for API form: <script type="text/javascript" src="http://maps.google.com/maps?file=api&amp;v=2&amp;key=ABQIAAAAwCUxKrPl8_9WadET5dc4KxTqOwVK5HCwTKtW27PjzpqojXnJORQ2kUsdCksByD4hzcGXiOxvn6C4cw&sensor=true"></script> <script type="text/javascript"> var geocoder = null; var location1 = null; var location2 = null; var gDir = null; var directions = null; var total = 0; function roundNumber(num, dec) { var result = Math.floor(num*Math.pow(10 ,dec))/Math.pow(10,dec); return result; } function from(form) { address1=form.start.options[form.start.selectedIndex].value form.address1.value=address1 form.address1.focus() } function to(form) { address2=form.end.options[form.end.selectedIndex].value form.address2.value=address2 form.address2.focus() } function initialize() { var map = new GMap2(document.getElementById("map_canvas")); map.setCenter(new GLatLng(54.019066,-1.381531),9); map.setMapType(G_NORMAL_MAP); geocoder = new GClientGeocoder(); gDir = new GDirections(map); GEvent.addListener(gDir, "load", function() { var drivingDistanceMiles = gDir.getDistance().meters / 1609.344; var drivingDistanceKilometers = gDir.getDistance().meters / 1000; var miles = drivingDistanceMiles.toFixed(0); //var cost = (((miles - 1) * 1.9) + 3.6).toFixed(2); var meters = gDir.getDistance().meters.toFixed(1); if(miles < 70){ var cost = miles *1.75; } if(miles >70){ var cost = miles *1.2; } document.getElementById('from').innerHTML = '<strong>From: </strong>' + location1.address; document.getElementById('to').innerHTML = '<strong>To: </strong>' + location2.address; document.getElementById('cost').innerHTML = '<span class="fare"><strong>Estimated Taxi FARE:</strong>' + ' £' + cost.toFixed(2) + '</span>'; document.getElementById('miles').innerHTML = '<strong>Distance: </strong>' + miles + ' Miles'; }); } function showLocation() // start of possible values for address not recognized on google search // values for address1 { if (document.forms[0].address1.value == "heathrow" || document.forms[0].address1.value == "Heathrow" || document.forms[0].address1.value == "heathrow airport" || document.forms[0].address1.value == "Heathrow Airport" || document.forms[0].address1.value == "London Heathrow" || document.forms[0].address1.value =="london heathrow" ) { (document.forms[0].address1.value = "Heathrow Airport"); } if (document.forms[0].address2.value == "heathrow" || document.forms[0].address2.value == "Heathrow" || document.forms[0].address2.value == "heathrow airport" || document.forms[0].address2.value == "Heathrow Airport" || document.forms[0].address2.value == "London Heathrow" || document.forms[0].address2.value =="london heathrow" ) { (document.forms[0].address2.value = "Heathrow Airport"); } geocoder.getLocations(document.forms[0].address1.value + document.forms[0].uk.value || document.forms[0].start.value + document.forms[0].uk.value, function (response) { if (!response || response.Status.code != 200) { alert("Sorry, we were unable to find the first address"); } else { location1 = {lat: response.Placemark[0].Point.coordinates[1], lon: response.Placemark[0].Point.coordinates[0], address: response.Placemark[0].address}; geocoder.getLocations(document.forms[0].address2.value + document.forms[0].uk.value, function (response) { if (!response || response.Status.code != 200) { alert("Sorry, we were unable to find the second address"); } else { location2 = {lat: response.Placemark[0].Point.coordinates[1], lon: response.Placemark[0].Point.coordinates[0], address: response.Placemark[0].address}; gDir.load('from: ' + location1.address + ' to: ' + location2.address); } }); } }); } </script> <style> #quote { font-family: Georgia, "Times New Roman", Times, serif; } </style> </head> <body style="background-color: rgb(255, 255, 255);" onUnload="GUnload()" onLoad="initialize()"> <div id="sidebar"> <!--MAPS--> <div id="calc_top"></div> <div id="calc_body"> <div id="calc_inside"> <span style="font-size: 16px; font-weight: bold;">Get A Quote Now</span> <p class="disclaimer">Fares can be calculated using either Area, Exact Address or Postcode, when entering address please include both road name and area i.e. <em>Harrogate Road, Ripon</em>. You can also select a pickup point and destination from the dropdown boxes. </p> <form onSubmit="showLocation(); return false;" action="#" id="booking_form"> <p> <select onChange="from(this.form)" name="start"> <option selected="selected">Select a Pickup Point</option> <option value="Leeds Bradford Airport">Leeds Bradford Airport</option> <option value="Manchester Airport">Manchester Airport</option> <option value="Teesside International Airport">Teeside Airport</option> <option value="Liverpool John Lennon Airport">Liverpool Airport</option> <option value="East Midlands Airport">East Midlands Airport</option> <option value="Heathrow International Airport">Heathrow Airport</option> <option value="Gatwick Airport">Gatwick Airport</option> <option value="Stanstead Airport">Stanstead Airport</option> <option value="Luton International Airport">Luton Airport</option> </select> </p> <p> <input type="text" value="From" name="address1"><br> <p> <select onChange="to(this.form)" name="end"> <option selected="selected">Select a Destination</option> <option value="Leeds Bradford Airport">Leeds Bradford Airport</option> <option value="Manchester Airport">Manchester Airport</option> <option value="Teesside International Airport">Teeside Airport</option> <option value="Liverpool John Lennon Airport">Liverpool Airport</option> <option value="East Midlands Airport">East Midlands Airport</option> <option value="Heathrow International Airport">Heathrow Airport</option> <option value="Gatwick Airport">Gatwick Airport</option> <option value="Stanstead Airport">Stanstead Airport</option> <option value="Luton International Airport">Luton Airport</option> </select> </p> <input type="text" value="To" name="address2"><br> <input type="hidden" value=" uk" name="uk"> <br> <input type="submit" value="Get Quote"> <input type="button" value="Reset" onClick="resetpage()"><br /><br /> <input type="submit" id="CBSubmit" value="Confirm and Book" action=""/> </p> </form> <p id="from"><strong>From:</strong></p> <p id="to"><strong>To:</strong></p> <p id="miles"><strong>Distance: </strong></p> <p id="cost"><span class="fare"><strong>Estimated Taxi FARE:</strong></span></p> <p id="results"></p> <div class="style4" style="width: 500px; height: 500px; position: relative; background-color: rgb(229, 227, 223);" id="map_canvas"></div> </div> </div> Code for Booking Form: <form method="post" action="contactengine.php" id="contact_form"> <p> <label for="Name" id="Name">Name:</label> <input type="text" name="Name" /> <label for="Email" id="Email">Email:</label> <input type="text" name="Email" /> <label for="tel" id="tel">Tel No:</label> <input type="text" name="tel" /><br /><br /> <label for="from" id="from">Pickup Point:</label> <input type="text" name="from" value="" /><br /><br /> <label for="to" id="to">Destination:</label> <input type="text" name="to" value=""/><br /> <label for="passengers" id="passengers">No. of passengers</label> <input type="text" name="passengers" /><br /><br /> <label for="quote" id="quote">Price of journey:</label> <input type="text" name="quote" value="" /><br /><br /> <label for="Message" id="Message">Any other info:</label> <textarea name="Message" rows="20" cols="40"></textarea> <br /> Are you an account holder?<br /> <label for="account" id="yes" /> Yes:</label> <input type="radio" class="radio" value="yes" name="account"> <label for="account" id="yes" /> No:</label> <input type="radio" class="radio" value="no" name="account"> </p> <small>Non-account holders will have to pay a £5 booking fee when confirming thier booking</small> <input type="submit" name="submit" value="Submit" class="submit-button" /> </p> </form> Thanks in advance

  Read the article

• Asp.NET ReportViewer “report execution has expired or cannot be found” error when using session state service or SQL Server session state

  - by dotneteer

  We encountered an error like: ReportServerException: The report execution x5pl2245iwvvq055khsxzlj5 has expired or cannot be found. (rsExecutionNotFound)]    Microsoft.Reporting.WebForms.ServerReportSoapProxy.OnSoapException(SoapException e) +72    Microsoft.Reporting.WebForms.Internal.Soap.ReportingServices2005.Execution.ProxyMethodInvocation.Execute(RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod) +428    Microsoft.Reporting.WebForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.GetExecutionInfo() +133    Microsoft.Reporting.WebForms.ServerReport.EnsureExecutionSession() +197    Microsoft.Reporting.WebForms.ServerReport.LoadViewState(Object viewStateObj) +256    Microsoft.Reporting.WebForms.ServerReport..ctor(SerializationInfo info, StreamingContext context) +355 [TargetInvocationException: Exception has been thrown by the target of an invocation.]    System.RuntimeMethodHandle._SerializationInvoke(Object target, SignatureStruct&amp; declaringTypeSig, SerializationInfo info, StreamingContext context) +0    System.Reflection.RuntimeConstructorInfo.SerializationInvoke(Object target, SerializationInfo info, StreamingContext context) +108    System.Runtime.Serialization.ObjectManager.CompleteISerializableObject(Object obj, SerializationInfo info, StreamingContext context) +273    System.Runtime.Serialization.ObjectManager.FixupSpecialObject(ObjectHolder holder) +49    System.Runtime.Serialization.ObjectManager.DoFixups() +223    System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage) +188    System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage) +203    System.Web.Util.AltSerialization.ReadValueFromStream(BinaryReader reader) +788    System.Web.SessionState.SessionStateItemCollection.ReadValueFromStreamWithAssert() +55    System.Web.SessionState.SessionStateItemCollection.DeserializeItem(String name, Boolean check) +281    System.Web.SessionState.SessionStateItemCollection.DeserializeItem(Int32 index) +110    System.Web.SessionState.SessionStateItemCollection.get_Item(Int32 index) +17    System.Web.SessionState.HttpSessionStateContainer.get_Item(Int32 index) +13    System.Web.Util.AspCompatApplicationStep.OnPageStartSessionObjects() +71    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2065 This error occurs long after the report viewer page has closed. It occurs to any asp.net page in the application, rendering the entire application unusable until the user gets a new session. The cause of the problem is that the ReportViewer uses session state. When a page retrieves session from any out-of-state session, the session variable of type Microsoft.Reporting.WebForms.ReportHierarchy is deserialized from the session storage. The deserialization could cause the object to connect to the report server when the report is no longer available. The solution is simple but not pretty. We need to clean up the session variable when the report viewer page is closed. One way is to add some Javascript to the page to handle the window.onunload event. In the event handler, call a web service to clean up the session variable. The name of the session variable appears to be randomly generated. So we need to loop through the session variable to find a variable of the type Microsoft.Reporting.WebForms.ReportHierarchy. Microsoft has implemented pinging between the report viewer and the report server to keep the report alive on the server when the report viewer is up; I hope they will go one step further to take care of this problem.

  Read the article

• How do I install GRUB on a RAID system installation?

  - by root45

  I'm trying to setup and install Ubuntu on a RAID 1 setup. I have two disks, sdb and sdc. I've been following this guide https://help.ubuntu.com/community/Installation/SoftwareRAID which more or less works for getting everything set up and Ubuntu installed. The problem is at the end of the installation, it tries to install GRUB. By default it tries my "first disk", which gives a "fatal error". I've tried installing it on a specific partion, e.g. sdb1 as well as RAID devices, e.g. md0, md1, etc.. Nothing seems to work. Edit: The actual error is "Unable to install GRUB in /dev/sdb Executing 'grub-install '/dev/sdb' failed. This is a fatal error." Then I'm taken back to the main install menu. If I choose "Install the GRUB boot loader on a hard disk" option, I can pick the partition, but entering sdb2 or md1 gives the same error. So I went ahead an just didn't install GRUB, which means now I presumably have a working Ubuntu installation, but I can't boot it. I've tried booting from the LiveCD to install GRUB, but I can't chroot into my system because it doesn't seem to recognize that my disk is a Linux disk. There's an error about it being a RAID partition. So basically I would really like to know how you know to which device to install GRUB at installation, or at the very least, how to install it on to my system now. I suppose I should also mention that sda is a Windows 7 installation that I would like to keep around and be able to access at boot. Thanks for any help.

  Read the article

• What is the structure of network managers system-connections files?

  - by Oyks Livede

  could anyone list the complete structure of the configuration files, which network manager stores for known networks in /etc/NetworkManager/system-connections for known networks? Sample (filename askUbuntu): [connection] id=askUbuntu uuid=81255b2e-bdf1-4bdb-b6f5-b94ef16550cd type=802-11-wireless [802-11-wireless] ssid=askUbuntu mode=infrastructure mac-address=00:08:CA:E6:76:D8 [ipv6] method=auto [ipv4] method=auto I would like to create some of them by my own using a script. However, before doing so I would like to know every possible option. Furthermore, this structure seems somehow to resemble the information you can get using the dbus for active connections. dbus-send --system --print-reply \ --dest=org.freedesktop.NetworkManager \ "$active_setting_path" \ # /org/freedesktop/NetworkManager/Settings/2 org.freedesktop.NetworkManager.Settings.Connection.GetSettings Will tell you: array [ dict entry( string "802-11-wireless" array [ dict entry( string "ssid" variant array of bytes "askUbuntu" ) dict entry( string "mode" variant string "infrastructure" ) dict entry( string "mac-address" variant array of bytes [ 00 08 ca e6 76 d8 ] ) dict entry( string "seen-bssids" variant array [ string "02:1A:11:F8:C5:64" string "02:1A:11:FD:1F:EA" ] ) ] ) dict entry( string "connection" array [ dict entry( string "id" variant string "askUbuntu" ) dict entry( string "uuid" variant string "81255b2e-bdf1-4bdb-b6f5-b94ef16550cd" ) dict entry( string "timestamp" variant uint64 1383146668 ) dict entry( string "type" variant string "802-11-wireless" ) ] ) dict entry( string "ipv4" array [ dict entry( string "addresses" variant array [ ] ) dict entry( string "dns" variant array [ ] ) dict entry( string "method" variant string "auto" ) dict entry( string "routes" variant array [ ] ) ] ) dict entry( string "ipv6" array [ dict entry( string "addresses" variant array [ ] ) dict entry( string "dns" variant array [ ] ) dict entry( string "method" variant string "auto" ) dict entry( string "routes" variant array [ ] ) ] ) ] I can create new setting files using the dbus (AddSettings() in /org/freedesktop/NetworkManager/Settings) passing this type of input, so explaining me this structure and telling me all possible options will also help. Afaik, this is a Dictionary{String, Dictionary{String, Variant}}. Will there be any difference creating config files directly or using the dbus?

  Read the article

• Enterprise Integration: Can Companies Afford It?

  - by Ralph Wheaton

  Each year, my company holds a global sales conference where employees and partners from around the world some together to collaborate, share knowledge and ideas and learn about future plans.  As a member of the professional services division, several of us had been asked to make a presentation, an elevator pitch in 3 minutes or less that relates to a success we have worked on or directly relates to our tag (that is, our primary technology focus).  Mine happens to be Enterprise Integration as it relates Business Intelligence.  I found it rather difficult to present that pitch in a short amount of time and had to pare it down.  At any rate, in just a little over 3 minutes, this is the presentation I submitted.  Here is a link to the full presentation video in WMV format.   Many companies today subscribe to a buy versus build mentality in an attempt to drive down costs and improve time to implementation. Sometimes this makes sense, especially as it relates to specialized software or software that performs a small number of tasks extremely well. However, if not carefully considered or planned out, this oftentimes leads to multiple disparate systems with silos of data or multiple versions of the same data. For instance, client data (contact information, addresses, phone numbers, opportunities, sales) stored in your CRM system may not play well with Accounts Receivables. Employee data may be stored across multiple systems such as HR, Time Entry and Payroll. Other data (such as member data) may not originate internally, but be provided by multiple outside sources in multiple formats. And to top it all off, some data may have to be manually entered into multiple systems to keep it all synchronized. When left to grow out of control like this, overall performance is lacking, stability is questionable and maintenance is frequent and costly. Worse yet, in many cases, this topology, this hodgepodge of data creates a reporting nightmare. Decision makers are forced to try to put together pieces of the puzzle attempting to find the information they need, wading through multiple systems to find what they think is the single version of the truth. More often than not, they find they are missing pieces, pieces that may be crucial to growing the business rather than closing the business. across applications. Master data owners are defined to establish single sources of data (such as the CRM system owns client data). Other systems subscribe to the master data and changes are replicated to subscribers as they are made. This can be one way (no changes are allowed on the subscriber systems) or bi-directional. But at all times, the master data owner is current or up to date. And all data, whether internal or external, use the same processes and methods to move data from one place to another, leveraging the same validations, lookups and transformations enterprise wide, eliminating inconsistencies and siloed data. Once implemented, an enterprise integration solution improves performance and stability by reducing the number of moving parts and eliminating inconsistent data. Overall maintenance costs are mitigated by reducing touch points or the number of places that require modification when a business rule is changed or another data element is added. Most importantly, however, now decision makers can easily extract and piece together the information they need to grow their business, improve customer satisfaction and so on. So, in implementing an enterprise integration solution, companies can position themselves for the future, allowing for easy transition to data marts, data warehousing and, ultimately, business intelligence. Along this path, companies can achieve growth in size, intelligence and complexity. Truly, the question is not can companies afford to implement an enterprise integration solution, but can they afford not to.   Ralph Wheaton Microsoft Certified Technology Specialist Microsoft Certified Professional Developer Microsoft VTS-P BizTalk, .Net

  Read the article

• Have You Ever Wondered How Your Operating System Got Its Name?

  - by Justin Garrison

  Have you ever wondered what “XP” stands for or where “Ubuntu” comes from? Some operating systems get their names from obvious places, but others need some explaining. Read on to find out where your favorite OS got its name. We’ve rounded up the most popular and well-known operating systems, as well as a few lesser-known ones—if you know of another operating system with an interesting story behind its name, make sure to teach your fellow readers in the comments. Latest Features How-To Geek ETC Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions How to Enable User-Specific Wireless Networks in Windows 7 Dim an Overly Bright Alarm Clock with a Binder Divider Preliminary List of Keyboard Shortcuts for Unity Now Available Bring a Touch of the Wild West to Your Desktop with the Rango Theme for Windows 7 Manage Your Favorite Social Accounts in Chrome and Iron with Seesmic E.T. II – Extinction [Fake Movie Sequel Video] Remastered King’s Quest Games Offer Classic Gaming on Modern Machines

  Read the article

< Previous Page | 501 502 503 504 505 506 507 508 509 510 511 512  | Next Page >