saved password - Page 521

NetworkManager Applet shows no networks

- by Kkelk

I am "the friend" referred to in the questions here and here. I decided to come and ask a question myself, as I can still not connect to the wireless network. I downloaded Keryx, as suggested here, and managed to download the necessary package and its dependencies. When I attempted to install the packages on Ubuntu using Keryx, Keryx just closed. Following this, I installed the packages manually using dpkg, and as far as I can tell, this was successful: kieran@ubuntu:~$ cd /host/wifi/Keryx/keryx/projects/Kieran/packages kieran@ubuntu:/host/wifi/Keryx/keryx/projects/Kieran/packages$ sudo dpkg -i *.deb [sudo] password for kieran: Selecting previously deselected package bcmwl-kernel-source. (Reading database ... 118296 files and directories currently installed.) Unpacking bcmwl-kernel-source (from bcmwl-kernel-source_5.60.48.36+bdcom-0ubuntu5_i386.deb) ... Selecting previously deselected package dkms. Unpacking dkms (from dkms_2.1.1.2-3ubuntu1.1_all.deb) ... Selecting previously deselected package fakeroot. Unpacking fakeroot (from fakeroot_1.14.4-1ubuntu1_i386.deb) ... Selecting previously deselected package linux-image. Unpacking linux-image (from linux-image_2.6.35.22.23_i386.deb) ... Selecting previously deselected package menu. Unpacking menu (from menu_2.1.44ubuntu1_i386.deb) ... Selecting previously deselected package patch. Unpacking patch (from patch_2.6-2ubuntu1_i386.deb) ... Setting up fakeroot (1.14.4-1ubuntu1) ... update-alternatives: using /usr/bin/fakeroot-sysv to provide /usr/bin/fakeroot (fakeroot) in auto mode. Setting up linux-image (2.6.35.22.23) ... Setting up menu (2.1.44ubuntu1) ... Setting up patch (2.6-2ubuntu1) ... Processing triggers for man-db ... Setting up dkms (2.1.1.2-3ubuntu1.1) ... Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu5) ... Loading new bcmwl-5.60.48.36+bdcom DKMS files... First Installation: checking all kernels... Building only for 2.6.35-22-generic Building for architecture i686 Building initial module for 2.6.35-22-generic Done. wl.ko: Running module version sanity check. - Original module - No original module exists within this kernel - Installation - Installing to /lib/modules/2.6.35-22-generic/updates/dkms/ depmod..... DKMS: install Completed. update-initramfs: deferring update (trigger activated) Processing triggers for install-info ... Processing triggers for doc-base ... Processing 31 changed 1 added doc-base file(s)... Registering documents with scrollkeeper... Processing triggers for menu ... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-2.6.35-22-generic Warning: No support for locale: en_GB.utf8 After rebooting, however, there were still no wireless networks in the NetworkManager Applet list. I opened the file /var/lib/NetworkManager/NetworkManager.state, and both NetworkEnabled and WirelessEnabled were set to True. While i'm very concious I may be asking a stupid question here, both my friend and I have nothing left to suggest, and as such - I would be very grateful for any answers as to how to get wireless working.

Read the article

Authenticating your windows domain users in the cloud

- by cibrax

Moving to the cloud can represent a big challenge for many organizations when it comes to reusing existing infrastructure. For applications that drive existing business processes in the organization, reusing IT assets like active directory represent good part of that challenge. For example, a new web mobile application that sales representatives can use for interacting with an existing CRM system in the organization. In the case of Windows Azure, the Access Control Service (ACS) already provides some integration with ADFS through WS-Federation. That means any organization can create a new trust relationship between the STS running in the ACS and the STS running in ADFS. As the following image illustrates, the ADFS running in the organization should be somehow exposed out of network boundaries to talk to the ACS. This is usually accomplish through an ADFS proxy running in a DMZ. This is the official story for authenticating existing domain users with the ACS. Getting an ADFS up and running in the organization, which talks to a proxy and also trust the ACS could represent a painful experience. It basically requires advance knowledge of ADSF and exhaustive testing to get everything right. However, if you want to get an infrastructure ready for authenticating your domain users in the cloud in a matter of minutes, you will probably want to take a look at the sample I wrote for talking to an existing Active Directory using a regular WCF service through the Service Bus Relay Binding. You can use the WCF ability for self hosting the authentication service within a any program running in the domain (a Windows service typically). The service will not require opening any port as it is opening an outbound connection to the cloud through the Relay Service. In addition, the service will be protected from being invoked by any unauthorized party with the ACS, which will act as a firewall between any client and the service. In that way, we can get a very safe solution up and running almost immediately. To make the solution even more convenient, I implemented an STS in the cloud that internally invokes the service running on premises for authenticating the users. Any existing web application in the cloud can just establish a trust relationship with this STS, and authenticate the users via WS-Federation passive profile with regular http calls, which makes this very attractive for web mobile for example. This is how the WCF service running on premises looks like, [ServiceBehavior(Namespace = "http://agilesight.com/active_directory/agent")] public class ProxyService : IAuthenticationService { IUserFinder userFinder; IUserAuthenticator userAuthenticator; public ProxyService() : this(new UserFinder(), new UserAuthenticator()) { } public ProxyService(IUserFinder userFinder, IUserAuthenticator userAuthenticator) { this.userFinder = userFinder; this.userAuthenticator = userAuthenticator; } public AuthenticationResponse Authenticate(AuthenticationRequest request) { if (userAuthenticator.Authenticate(request.Username, request.Password)) { return new AuthenticationResponse { Result = true, Attributes = this.userFinder.GetAttributes(request.Username) }; } return new AuthenticationResponse { Result = false }; } } Two external dependencies are used by this service for authenticating users (IUserAuthenticator) and for retrieving user attributes from the user’s directory (IUserFinder). The UserAuthenticator implementation is just a wrapper around the LogonUser Win Api. The UserFinder implementation relies on Directory Services in .NET for searching the user attributes in an existing directory service like Active Directory or the local user store. public UserAttribute[] GetAttributes(string username) { var attributes = new List<UserAttribute>(); var identity = UserPrincipal.FindByIdentity(new PrincipalContext(this.contextType, this.server, this.container), IdentityType.SamAccountName, username); if (identity != null) { var groups = identity.GetGroups(); foreach(var group in groups) { attributes.Add(new UserAttribute { Name = "Group", Value = group.Name }); } if(!string.IsNullOrEmpty(identity.DisplayName)) attributes.Add(new UserAttribute { Name = "DisplayName", Value = identity.DisplayName }); if(!string.IsNullOrEmpty(identity.EmailAddress)) attributes.Add(new UserAttribute { Name = "EmailAddress", Value = identity.EmailAddress }); } return attributes.ToArray(); } As you can see, the code is simple and uses all the existing infrastructure in Azure to simplify a problem that looks very complex at first glance with ADFS. All the source code for this sample is available to download (or change) in this GitHub repository, https://github.com/AgileSight/ActiveDirectoryForCloud

Read the article

A story of Murphy–my technical issues at TechDays Switzerland #chtd

- by Laurent Bugnion

I had two sessions at the recent Swiss TechDays. While the first one (Advanced Development for Windows Phone 8) went extremely well (I think), I had a very annoying technical issue in the beginning of my second session. First let me add that I talked to Microsoft about that and I hope they will change a few things in the room assignment for next year. My two sessions were one right after the other, with only 15 minutes break to change room. I don’t mind having two sessions so close from each other, but I would really like them to be in the same room in order to avoid having to move my laptops (plural, that will become important later) and redoing the tech check. That being said, I am guilty of not checking where my talks would be before the day before the conference, and when I did notice, it was too late to change it. After my first session, I quickly moved to the other room and setup my main laptop, a Dell Precision. We tested the video output (VGA) and didn’t notice anything special. The projectors are using a fairly high resolution (kudos to the Basel conference center for not having old school 1024x768 projectors anymore, that makes Blend really hard to demo ;) but since everything went great during the first talk, I was not worried. In fact I even had some time to chat with some early attendees about my Microsoft Surface and the Samsung Slate 7, which I had carried with me in addition to the Precision. I just thought it would be nice to show the hardware that Windows 8 can run on, without thinking any further. When the session started, I immediately noticed that the main screen was not showing anything. I thought I had just forgotten to switch to “duplicate” for the video output, and did that with a quick Win-P. However it didn’t “hold”. After 2 seconds, it reverted back to a black display for my attendees. Then I started to really worry. We tried everything, switching from VGA to HDMI, changing the resolution, setting the projector as primary display, but nothing did the trick. The projector was just refusing to show my screen. Now, to show you how despaired I started to be, I even considered using the “extend” setting (which worked just fine), and to use one of the feedback monitors on the floor but really it was super cumbersome. Eventually, my last resort arrived: I started my Samsung Slate 7, which by chance has Visual Studio 12 and Blend 5 installed, plugged the HDMI projector in the dock (yes, I had the dock with me, which I usually don’t!), connected it to internet (had to enter a long password for that), loaded the source code from my main machine using a USB stick and…. finally started to give my presentation. All in all I think we lost about 10 minutes. Amongst the most horrible minutes of my whole life, truly (yes I am blessed, I didn’t have that many horrible minutes in my life ;) I really want to apologize to my attendees. We joked a bit during the attempts to resolve the issue, the reactions I had after the session were all very nice and sympathetic. Only a handful of people left my session while I was having the issues, and I really don’t blame them (who knew how long the problem would last!!). But still, I probably talked at more than 60 sessions over the years, and this was by far my most painful moment. What did I learn? So what did I learn from this? Well from now on I will always have my slate ready with the latest source code, internet connection and every tool I might need during the presentation. This way, if I detect even a hint that the Precision might not work, I will just switch to the Slate. The experience of presenting on the slate is actually not bad at all, it is just a bit slow for my taste, but it does work. By the way, I will be posting the code and slides for my sessions very soon, I just need to “clean it and zip it”. Stay tuned, and thanks again for your patience in that horrible circumstance. Cheers Laurent Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

Read the article

How do I revert updates/tweaks to get to a usable GUI?

- by Frankenmartin

I just installed 12.04 the other day and then ran into trouble upon restarting after installing updates. What I did before the problem occurred: I did not make many changes before this problem occurred. Changes I did make included: Downloading and installing Adobe Flash Player (off topic but: I am under the impression that Java, "C&C" and Shockwave can not be run in Ubuntu. Could anybody verify this?) I also installed gnome-tweak-tool and used it to install several themes. These themes worked well until restarting after the update. Is it possible that one of these themes caused the problem (in combination with the update or because of the restart)? Installed 215 updates from update manager and restarted my system. Current Situation: Unity 3D is unusable since restarting after running updates. When I log in after entering my password the following things happen: the overhead panel disappears and the screen goes black for a minute my wallpaper flashes for a couple seconds but then the screen goes black again after another minute the wallpaper reappears but nothing else does and I am not able to open anything or even right click. after 5 minutes I can finally get a right click menu eventually a box comes up warning about a Compiz failure and asking to let it quit--which I did. Using the right click functionality I was able to create a new folder on the desktop and use this to open a file browser. In doing so I noticed that the downloads I had made were missing (music, image files, etc., even after unpacking several .zip and .rar files) even though I believe that everything should still be there. Any new windows that I create are un-closable/minimizable/movable/etc, because the window bars are missing. I have tried rebooting several times but the results are the same. I was able to browse some off the System Settings windows by clicking on the wallpaper link in the right click menu. In doing so I navigated into the update manager and noticed that updates were selected to be accepted from some "unsupported sources". I do not recall setting these options myself and wonder why these--potentially dangerous--options would be selected by default. Unity 2D is usable but not free of bugs--I stumbled across the ability to log into a Unity 2D session while trying to log into Unity 3D. So far I have only noticed one bug in Unity 2D: the close, minimize and maximize buttons are invisible--however they are still usable despite being invisible. What I need: I'm very new to Linux and Ubuntu and still am in the feeling out stages. As such I will have some trouble answering clarifying questions. I haven't used the terminal yet and would probably not be comfortable using it without very clear instructions. What I do need is to know how I can roll back/remove all those updates so I can use my computer regularly again. I do believe that I could follow step-by-step instructions as long as they are clear and concise if someone knows what my problem is.

Read the article

Upgrade issues due to broken "dependency problems prevent configuration of linux-image-generic" error

- by tsukune1791

okay, I've recently upgrade from 11.10 to 12.04 and I've been having some issues. I don't know if its a bug or not, but I thought I would submit it here. Okay here's a little background; I ran the distro update from the update manager and got a couple errors that I didn't catch. the computer restarted, and when I logged the Launcher and my top bar of the Ubuntu desktop didn't load. While it was trying to load a couple error messages came up, I think they were called "apport", saying they couldn't send the bug information for some reason. I believe it said somethings wrong with my internet connection, but nothing's wrong with it. Anyway I tried running some things in terminal, namely sudo apt-get -f install sudo apt-get upgrade sudo apt-get dist-upgrade and keep getting the following errors; dustin@marceau-laptop:~$ sudo apt-get dist-upgrade [sudo] password for dustin: Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 4 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? Y Setting up initramfs-tools (0.99ubuntu13) ... update-initramfs: deferring update (trigger activated) Setting up linux-image-3.2.0-24-generic (3.2.0-24.37) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/dkms 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/initramfs-tools 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/pm-utils 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/update-notifier 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic run-parts: executing /etc/kernel/postinst.d/zz-runlilo 3.2.0-24-generic /boot/vmlinuz-3.2.0-24-generic Fatal: No images have been defined. run-parts: /etc/kernel/postinst.d/zz-runlilo exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-3.2.0-24-generic.postinst line 1010. dpkg: error processing linux-image-3.2.0-24-generic (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-generic: linux-image-generic depends on linux-image-3.2.0-24-generic; however: Package linux-image-3.2.0-24-generic is not configured yet. dpkg: error processing linux-image-generic (--configure): dependency problems - leaving unconfigured dpkg: dependency problems prevent configuration of linux-generic: linux-generic depends on linux-image-generic (= 3.2.0.24.26); however: Package linux-image-generic is not configured yet. dpkg: error processing linux-generic (--configure): dependency problems - leaving unconfigured Processing triggers for initramfs-tools ... No apport report written because the error message indicates its a followup error from a previous failure. No apport report written because the error message indicates its a followup error from a previous failure. update-initramfs: Generating /boot/initrd.img-3.2.0-24-generic Fatal: No images have been defined. run-parts: /etc/initramfs/post-update.d//runlilo exited with return code 1 dpkg: error processing initramfs-tools (--configure): subprocess installed post-installation script returned error exit status 1 No apport report written because MaxReports is reached already Errors were encountered while processing: linux-image-3.2.0-24-generic linux-image-generic linux-generic initramfs-tools localepurge: Disk space freed in /usr/share/locale: 0 KiB localepurge: Disk space freed in /usr/share/man: 0 KiB localepurge: Disk space freed in /usr/share/gnome/help: 0 KiB localepurge: Disk space freed in /usr/share/omf: 0 KiB localepurge: Disk space freed in /usr/share/doc/kde/HTML: 0 KiB Total disk space freed by localepurge: 0 KiB E: Sub-process /usr/bin/dpkg returned an error code (1) And my Ubuntu desktop is still not working. I can log into Gnome and Ubuntu 2D but the Launcher, I think it's call, doesn't load. Can someone help me fix these error, or point me in the right direction to get them fixed? It is much appriciated.

Read the article

DATEFROMPARTS

- by jamiet

I recently overheard a remark by Greg Low in which he said something akin to "the most interesting parts of a new SQL Server release are the myriad of small things that are in there that make a developer's life easier" (I'm paraphrasing because I can't remember the actual quote but it was something like that). The new DATEFROMPARTS function is a classic example of that . It simply takes three integer parameters and builds a date out of them (if you have used DateSerial in Reporting Services then you'll understand). Take the following code which generates the first and last day of some given years: SELECT 2008 AS Yr INTO #Years UNION ALL SELECT 2009 UNION ALL SELECT 2010 UNION ALL SELECT 2011 UNION ALL SELECT 2012SELECT [FirstDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 101))), [LastDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 1231)))FROM #Years y here are the results: That code is pretty gnarly though with those CONVERTs in there and, worse, if the character string is constructed in a certain way then it could fail due to localisation, check this out: SET LANGUAGE french;SELECT dt,Month_Name=DATENAME(mm,dt)FROM ( SELECT dt = CONVERT(DATETIME,CONVERT(CHAR(4),y.[Yr]) + N'-01-02') FROM #Years y )d;SET LANGUAGE us_english;SELECT dt,Month_Name=DATENAME(mm,dt)FROM ( SELECT dt = CONVERT(DATETIME,CONVERT(CHAR(4),y.[Yr]) + N'-01-02') FROM #Years y )d; Notice how the datetime has been converted differently based on the language setting. When French, the string "2012-01-02" gets interpreted as 1st February whereas when us_english the same string is interpreted as 2nd January. Instead of all this CONVERTing nastiness we have DATEFROMPARTS: SELECT [FirstDayOfYear] = DATEFROMPARTS(y.[Yr],1,1), [LasttDayOfYear] = DATEFROMPARTS(y.[Yr],12,31)FROM #Years y How much nicer is that? The bad news of course is that you have to upgrade to SQL Server 2012 or migrate to SQL Azure if you want to use it, as is the way of the world! Don't forget that if you want to try this code out on SQL Azure right this second, for free, you can do so by connecting up to AdventureWorks On Azure. You don't even need to have SSMS handy - a browser that runs Silverlight will do just fine. Simply head to https://mhknbn2kdz.database.windows.net/ and use the following credentials: Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly One caveat, SELECT INTO doesn't work on SQL Azure so you'll have to use this instead: DECLARE @y TABLE ( [Yr] INT);INSERT @y([Yr])SELECT 2008 AS Yr UNION ALL SELECT 2009 UNION ALL SELECT 2010 UNION ALL SELECT 2011 UNION ALL SELECT 2012;SELECT [FirstDayOfYear] = DATEFROMPARTS(y.[Yr],1,1), [LastDayOfYear] = DATEFROMPARTS(y.[Yr],12,31)FROM @y y;SELECT [FirstDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 101))), [LastDayOfYear] = CONVERT(DATE,CONVERT(CHAR(8),((y.[Yr] * 10000) + 1231)))FROM @y y; @Jamiet

Read the article

Artec TV18R Tuner not working :(

- by Antillar Maximus

Can somebody kindly help me setup my TV Tuner stick? Make and Model: Artec TV18R USB TV Tuner OS: Ubuntu 11.10 64bit Hardware: MSI MS1656-US (GX640 barebones): i5 580M, 2xIntel X25M SSDs, Radeon HD5850M,Realtek sound. Logs and messages: antillar@antillar-MS-1656:/usr/share/dvb/atsc$ [B][COLOR=Red]sudo lsusb[/COLOR][/B] Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 003: ID ffc0:001f Bus 002 Device 005: ID 05d8:8117 Ultima Electronics Corp. [/code][code]antillar@antillar-MS-1656:/usr/share/dvb/atsc$ So, it seems that the tuner is being detected, but the light on it does not turn on? Not sure what is going on? sudo lspci [sudo] password for antillar: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 05) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05) 01:00.0 VGA compatible controller: ATI Technologies Inc Broadway PRO [Mobility Radeon HD 5800 Series] 01:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 04:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller 04:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller 04:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller 04:00.3 System peripheral: JMicron Technology Corp. MS Host Controller 04:00.4 System peripheral: JMicron Technology Corp. xD Host Controller 05:00.0 Network controller: Intel Corporation Ultimate N WiFi Link 5300 ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) antillar@antillar-MS-1656:/usr/share/dvb/atsc$ I have been searching for a solution to this all weekend without any luck. I remember reading that ehci_hcd is the problem, but I'm not sure if disabling it is a good idea. I don't want my USB ports to go back to v1.1. Thank you!

Read the article

Cloud hosted CI for .NET projects

- by Scott Dorman

Originally posted on: http://geekswithblogs.net/sdorman/archive/2014/06/02/cloud-hosted-ci-for-.net-projects.aspxContinuous integration (CI) is important. If you don’t have it set up…you should. There are a lot of different options available for hosting your own CI server, but they all require you to maintain your own infrastructure. If you’re a business, that generally isn’t a problem. However, if you have some open source projects hosted, for example on GitHub, there haven’t really been any options. That has changed with the latest release of AppVeyor, which bills itself as “Continuous integration for busy developers.” What’s different about AppVeyor is that it’s a hosted solution. Why is that important? By being a hosted solution, it means that I don’t have to maintain my own infrastructure for a build server. How does that help if you’re hosting an open source project? AppVeyor has a really competitive pricing plan. For an unlimited amount of public repositories, it’s free. That gives you a cloud hosted CI system for all of your GitHub projects for the cost of some time to set them up, which actually isn’t hard to do at all. I have several open source projects (hosted at https://github.com/scottdorman), so I signed up using my GitHub credentials. AppVeyor fully supported my two-factor authentication with GitHub, so I never once had to enter my password for GitHub into AppVeyor. Once it was done, I authorized GitHub and it instantly found all of the repositories I have (both the ones I created and the ones I cloned from elsewhere). You can even add “build badges” to your markdown files in GitHub, so anyone who visits your project can see the status of the lasted build. Out of the box, you can simply select a repository, add the build project, click New Build and wait for the build to complete. You now have a complete CI server running for your project. The best part of this, besides the fact that it “just worked” with almost zero configuration is that you can configure it through a web-based interface which is very streamlined, clean and easy to use or you can use a appveyor.yml file. This means that you can define your CI build process (including any scripts that might need to be run, etc.) in a standard file format (the YAML format) and store it in your repository. The benefits to that are huge. The file becomes a versioned artifact in your source control system, so it can be branched, merged, and is completely transparent to anyone working on the project. By the way, AppVeyor isn’t limited to just GitHub. It currently supports GitHub, BitBucket, Visual Studio Online, and Kiln. I did have a few issues getting one of my projects to build, but the same day I posted the problem to the support forum a fix was deployed, and I had a functioning CI build about 5 minutes after that. Since then, I’ve provided some additional feature requests and had a few other questions, all of which have seen responses within a 24-hour period. I have to say that it’s easily been one of the best customer support experiences I’ve seen in a long time. AppVeyor is still young, so it doesn’t yet have full feature parity with some of the older (more established) CI systems available, but it’s getting better all the time and I have no doubt that it will quickly catch up to those other CI systems and then pass them. The bottom line, if you’re looking for a good cloud-hosted CI system for your .NET-based projects, look at AppVeyor.

Read the article

Cannot Mount USB 3.0 Hard Disk ?!!

- by Tenken

Hi, I have a USB 3.0 external hard disk which I am unable to mount. The entry appears in the "lsusb" command, but I do not exactly understand how to mount it. This is the output for my lsusb command. "ASMedia Technology Inc." is the USB 3.0 device. I would appreciate some help in mounting and accessing the hard disk. This the relevant output of my "lsusb -v" : Bus 009 Device 002: ID 174c:5106 ASMedia Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x174c ASMedia Technology Inc. idProduct 0x5106 bcdDevice 0.01 iManufacturer 2 ASMedia iProduct 3 AS2105 iSerial 1 00000000000000000000 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Bus 009 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.35-28-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:04:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0503 highspeed power enable connect Device Status: 0x0003 Self Powered Remote Wakeup Enabled This is the error given when I try to mount the hard drive: shinso@shinso-IdeaPad:~$ sudo mount /dev/sdb /mnt [sudo] password for shinso: mount: /dev/sdb: unknown device This the output of "dmesg|tail": [30062.774178] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [30535.800977] usb 9-4: USB disconnect, address 3 [30659.237342] Valid eCryptfs headers not found in file header region or xattr region [30659.237351] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31259.268310] Valid eCryptfs headers not found in file header region or xattr region [31259.268313] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [31860.059058] Valid eCryptfs headers not found in file header region or xattr region [31860.059062] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO [32465.220590] Valid eCryptfs headers not found in file header region or xattr region [32465.220593] Either the lower file is not in a valid eCryptfs format, or the key could not be retrieved. Plaintext passthrough mode is not enabled; returning -EIO I am using Ubuntu 10.10 (64 bit). Any help is appreciated.

Read the article

Deploying Oracle ADF Essentials Applications to Glassfish

- by Shay Shmeltzer

With the new Oracle ADF Essentials offering you can now deploy applications that leverage Oracle ADF on the open source Glassfish 3.1 server. Deployment is documented in the official JDeveloper and ADF documentation (here) but below is a summary of the steps and a video of the steps you'll need to take to get a basic Oracle ADF Essentials application to work on GlassFish. Note - to make starting/stopping GlassFish easier for my demo I used my GlassFish extension that you can get here. First we'll install some ADF Runtime libraries on GlassFish Download and install Glassfish (Note - if you also have an Oracle DB on the same machine, you'll want to switch GlassFish's HTTP port to something else instead of 8080). Download the Oracle ADF Essentials packaging - this will get you an adf_essentials.zip file. Copy the adf_essentials.zip to the lib directory of your Glassfish domain - on a default windows install this would be: C:\glassfish3\glassfish\domains\domain1\lib Go the the above lib directory and issue a unzip -j adf_essentials.zip This will extract the ADF libraries to the directory. Now you can start the Glassfish server. Now let's configure Glassfish to handle applications of the ADF type: Invoke the admin console of glassfish (http://localhost:4848) and log into your admin account. Go to Configurations->Server-config->JVM Settings and choose the JVM Options tab Add the following entries: -XX:MaxPermSize=512m (note this entry should already exist so just make sure it has a big enough value) -Doracle.mds.cache=simple While we are in the admin console, we can also define JDBC connections that will be used by our application. Go into Resources->JDBC->JDBC Connection Pools and click to create a New one Give it a name and choose the resource type to be javax.sql.XADataSource and choose Oracle as the Database Driver vendor. Click Next Scroll down to the Additional Properties section and start filling in the information for your database. The values for an Oracle XE will be (user=hr, databaseName = XE, Password=hr, ServerName=localhost, DriverType=thin, PortNumber=1521) Click Finish Click Ping to check your connection works. Now define a new JDBC Resource that will use the pool you just defined. In my example I called the resource jdbc/HRDS You will need this name to match the name in your Application Module connection configuraiton.Now you can re-start the Glassfish server for the changes to take effect. Get an ADF application going (you can use the regular Fusion Application template for this) Go into the project properties of your viewController project, under the deployment section click to edit the deployment profile that is defined there. Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. Go to Application -> Application Properties-> Deployment Go to Platform and choose Glassfish 3.1 from the drop down list. Click ok to go back to your project. This step will make sure that JDeveloper will autoamtically add the necessary ADF libraries to the EAR file that is being generated for deployment on Glassfish Go to your Application->Deploy and deploy either to an EAR file or directly to a Glassfish server connection that you created. Things should just work, but if they don't then look up the server.log in the log directory and check out what error is in there. Here is a video demo of the various steps: Note - right now the deployment of an ADF application takes about 2 minutes on my machine we are hoping to be able to improve this timing in the future. People who are more familiar with Glassfish might want to explore using exploded directory deployment and see if they can get it to work.

Read the article

ODEE Green Field (Windows) Part 3 - SOA Suite

- by AndyL-Oracle

So you're still here, are you? I'm sure you're probably overjoyed at the prospect of continuing with our green field installation of ODEE. In my previous post, I covered the installation of WebLogic - you probably noticed, like I did, that it's a pretty quick install. I'm pretty certain this had everything to do with how quickly the next post made it to the internet! So let's dig in. Make sure you've followed the steps from the initial post to obtain the necessary software and prerequisites! Unpack the RCU (Repository Creation Utility). This ZIP file contains a directory (rcuHome) that should be extracted into your ORACLE_HOME. Run the RCU – execute rcuHome/bin/rcu.bat. Click Next. Select Create and click Next. Enter the database connection details and click Next – any failure to connection will show in the Messages box. Click Ok Expand and select the SOA Infrastructure item. This will automatically select additional required components. You can change the prefix used, but DEV is recommended. If you are creating a sandbox that includes additional components like WebCenter Content and UMS, you may select those schemas as well but they are not required for a basic ODEE installation. Click Next. Click OK. Specify the password for the schema(s). Then click Next. Click Next. Click OK. Click OK. Click Create. Click Close. Unpack the SOA Suite installation files into a single directory e.g. SOA. Run the installer – navigate and execute SOA/Disk1/setup.exe. If you receive a JDK error, switch to a command line to start the installer. To start the installer via command line, do Start?Run?cmd and cd into the SOA\Disk1 directory. Run setup.exe –jreLoc < pathtoJRE >. Ensure you do not use a path with spaces – use the ~1 notation as necessary (your directory must not exceed 8 characters so “Program Files” becomes “Progra~1” and “Program Files (x86)” becomes “Progra~2” in this notation). Click Next. Select Skip and click Next. Resolve any issues shown and click Next. Verify your oracle home locations. Defaults are recommended. Click Next. Select your application server. If you’ve already installed WebLogic, this should be automatically selected for you. Click Next. Click Install. Allow the installation to progress… Click Next. Click Finish. You can save the installation details if you want. That should keep you satisfied for the moment. Get ready, because the next posts are going to be meaty!

Read the article

New Oracle BI Mobile Demonstration and SampleApp V305 on OTN

- by Mike.Hallett(at)Oracle-BI&EPM

Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 There is a new version of the Oracle BI Mobile HD app for iPhones and iPad. So download / update your App now. Normal 0 false false false EN-GB X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Then we have also changed the public server for hosting the Oracle BI Mobile Demonstration. This server image is based on the standard OBIEE 11.1.1.7 Sample Application (V305) which you can also download as a VirtualBox Image (this is a turnkey virtual environment with full SampleAppV305 preconfigured) from OTN here. When your App is on your iPad, go into the “Settings” and “Add Server” to fill in the host location and access details as shown below: · Host = slc02ojq.oracle.com · Port = 7780 · Username = Prodney · Password = Admin123 · Note: SSL and SSO = OFF This same SampleApp V305 Demonstration server can also be accessed from your PC browser @ http://slc02ojq.oracle.com:7780/analytics. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

Read the article

Randomely loosing wireless connexion with Cubuntu 12.04

- by statquant

I am presently experiencing random disconnections from my wireless network. It looks like it is more and more frequent (however I have not seen any clear pattern). This is killing me... Here is some information that should help (from ubuntu forums). Thanks for reading Machine : Acer Aspire S3 statquant@euclide:~$ lsb_release -d Description: Ubuntu 12.04.1 LTS statquant@euclide:~$ uname -mr 3.2.0-33-generic x86_64 statquant@euclide:~$ sudo /etc/init.d/networking restart * Running /etc/init.d/networking restart is deprecated because it may not enable again some interfaces * Reconfiguring network interfaces... statquant@euclide:~$ lspci 02:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01) statquant@euclide:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 004: ID 064e:c321 Suyin Corp. Bus 002 Device 003: ID 0bda:0129 Realtek Semiconductor Corp. statquant@euclide:~$ ifconfig wlan0 Link encap:Ethernet HWaddr 74:de:2b:dd:c4:78 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::76de:2bff:fedd:c478/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:913 errors:0 dropped:0 overruns:0 frame:0 TX packets:802 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:873218 (873.2 KB) TX bytes:125826 (125.8 KB) statquant@euclide:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"Bbox-D646D1" Mode:Managed Frequency:2.437 GHz Access Point: 00:19:70:80:01:6C Bit Rate=65 Mb/s Tx-Power=16 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=56/70 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:71 Missed beacon:0 statquant@euclide:~$ dmesg | grep "wlan" [ 17.495866] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 17.498950] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 20.072015] wlan0: authenticate with 00:19:70:80:01:6c (try 1) [ 20.269853] wlan0: authenticate with 00:19:70:80:01:6c (try 2) [ 20.272386] wlan0: authenticated [ 20.298682] wlan0: associate with 00:19:70:80:01:6c (try 1) [ 20.302321] wlan0: RX AssocResp from 00:19:70:80:01:6c (capab=0x431 status=0 aid=1) [ 20.302325] wlan0: associated [ 20.307307] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 30.402292] wlan0: no IPv6 routers present statquant@euclide:~$ sudo lshw -C network [sudo] password for statquant: *-network description: Wireless interface product: AR9485 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 74:de:2b:dd:c4:78 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-33-generic firmware=N/A ip=192.168.1.3 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:c0400000-c047ffff memory:afb00000-afb0ffff statquant@euclide:~$ iwlist scan wlan0 Scan completed : Cell 01 - Address: 00:19:70:80:01:6C Channel:6 Frequency:2.437 GHz (Channel 6) Quality=56/70 Signal level=-54 dBm Encryption key:on ESSID:"Bbox-D646D1" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s Mode:Master Extra:tsf=000000125fb152bb Extra: Last beacon: 40020ms ago IE: Unknown: 000B42626F782D443634364431 IE: Unknown: 010882848B960C121824 IE: Unknown: 030106 IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: WPA Version 1 Group Cipher : TKIP Pairwise Ciphers (2) : CCMP TKIP Authentication Suites (1) : PSK IE: Unknown: 2A0100 IE: Unknown: 32043048606C IE: Unknown: DD180050F2020101820003A4000027A4000042435E0062322F00 IE: Unknown: 2D1A4C101BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D1606080800000000000000000000000000000000000000 IE: Unknown: DD0900037F01010000FF7F IE: Unknown: DD0A00037F04010000000000 And... finally, please note that I did the following (after looking for fixes of similar problems), but unfortunately it did not work sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1

Read the article

PHP code works on Chrome, but not on Firefox or IE (send email via HTML form) [on hold]

- by Cachirro

My brother has this form: <form id="lista" action="lista2.php" method="post"> <input name="cf_name" type="text" size="50" hidden="yes" class="obscure"> <input name="cf_email" type="text" size="50" hidden="yes" class="obscure"> <textarea name="cf_message" cols="45" rows="10" hidden="yes" class="obscure"> </textarea> <input type="image" name="submit" value="Enviar Lista por Email" src="imagens/lista_email.png" width="40" height="40" onclick="this.form.elements['cf_message'].value = lista_mail;this.form.elements['cf_name'].value = prompt('Escreva o seu nome:', '');this.form.elements['cf_email'].value = prompt('Escreva o seu email:', '');"> <input name="submit2" type="submit" value="Enviar" hidden="yes" class="obscure"> </form> That calls this PHP file: <?php if ( isset($_POST['submit']) ) { // Dados de autenticacao SMTP $smtpinfo['host'] = 'localhost'; $smtpinfo['port'] = '25'; $smtpinfo['auth'] = true; $smtpinfo['username'] = 'xxx'; $smtpinfo['password'] = 'xxx'; // Dados recebidos do formulario $nome = $_POST['cf_name']; $email = $_POST['cf_email']; $mensagem = $_POST['cf_message']; // Inclusão de ficheiro PEAR. Certifique-se que o PEAR está activado no seu alojamento require_once "Mail.php"; // Corpo da mensagem $body = "Nome: ".$nome; $body.= "\n\n"; $body.= nl2br($mensagem); $headers = array ('From' => $email, 'To' => $smtpinfo["username"], 'Subject' => 'Encomenda Website'); $mail_object = Mail::factory('smtp', $smtpinfo); $mail = $mail_object->send($smtpinfo["username"], $headers, $body); if ( PEAR::isError($mail) ) { echo ("<p>" . $mail->getMessage() . "</p>"); } else { echo ('<b><font color="FFFF00">Mensagem enviada com sucesso.<br><br></b>Seu email: ' . $email . '<br><br></font>'); }} ?> This basically sends an email with some selected products, name and email. The problem is that it works perfectly on Chrome, but not on FF or IE. When the submit image is pressed, the URL changes to the PHP file, but it displays a blank page. After display errors activated: ini_set('display_errors',1); ini_set('display_startup_errors',1); error_reporting(-1) FF/IE display blank page and email isn't sent, Chrome sends the email and displays this: Strict Standards: Non-static method Mail::factory() should not be called statically in /var/www/vhosts/[site url]/httpdocs/lista2.php on line 33 Strict Standards: Non-static method PEAR::isError() should not be called statically, assuming $this from incompatible context in /usr/share/php/Mail/smtp.php , dont know if it helps So, what is causing the email to be sent on chrome and not on FF or IE? Thank you.

Read the article

ORE graphics using Remote Desktop Protocol

- by Sherry LaMonica

Oracle R Enterprise graphics are returned as raster, or bitmap graphics. Raster images consist of tiny squares of color information referred to as pixels that form points of color to create a complete image. Plots that contain raster images render quickly in R and create small, high-quality exported image files in a wide variety of formats. However, it is a known issue that the rendering of raster images can be problematic when creating graphics using a Remote Desktop connection. Raster images do not display in the windows device using Remote Desktop under the default settings. This happens because Remote Desktop restricts the number of colors when connecting to a Windows machine to 16 bits per pixel, and interpolating raster graphics requires many colors, at least 32 bits per pixel.. For example, this simple embedded R image plot will be returned in a raster-based format using a standalone Windows machine: R> library(ORE) R> ore.connect(user="rquser", sid="orcl", host="localhost", password="rquser", all=TRUE) R> ore.doEval(function() image(volcano, col=terrain.colors(30))) Here, we first load the ORE packages and connect to the database instance using database login credentials. The ore.doEval function executes the R code within the database embedded R engine and returns the image back to the client R session. Over a Remote Desktop connection under the default settings, this graph will appear blank due to the restricted number of colors. Users who encounter this issue have two options to display ORE graphics over Remote Desktop: either raise Remote Desktop's Color Depth or direct the plot output to an alternate device. Option #1: Raise Remote Desktop Color Depth setting In a Remote Desktop session, all environment variables, including display variables determining Color Depth, are determined by the RCP-Tcp connection settings. For example, users can reduce the Color Depth when connecting over a slow connection. The different settings are 15 bits, 16 bits, 24 bits, or 32 bits per pixel. To raise the Remote Desktop color depth: On the Windows server, launch Remote Desktop Session Host Configuration from the Accessories menu.Under Connections, right click on RDP-Tcp and select Properties.On the Client Settings tab either uncheck LimitMaximum Color Depth or set it to 32 bits per pixel. Click Apply, then OK, log out of the remote session and reconnect.After reconnecting, the Color Depth on the Display tab will be set to 32 bits per pixel. Raster graphics will now display as expected. For ORE users, the increased color depth results in slightly reduced performance during plot creation, but the graph will be created instead of displaying an empty plot. Option #2: Direct plot output to alternate device Plotting to a non-windows device is a good option if it's not possible to increase Remote Desktop Color Depth, or if performance is degraded when creating the graph. Several device drivers are available for off-screen graphics in R, such as postscript, pdf, and png. On-screen devices include windows, X11 and Cairo. Here we output to the Cairo device to render an on-screen raster graphic. The grid.raster function in the grid package is analogous to other grid graphical primitives - it draws a raster image within the current plot's grid. R> options(device = "CairoWin") # use Cairo device for plotting during the session R> library(Cairo) # load Cairo, grid and png libraries R> library(grid) R> library(png) R> res <- ore.doEval(function()image(volcano,col=terrain.colors(30))) # create embedded R plot R> img <- ore.pull(res, graphics = TRUE)$img[[1]] # extract image R> grid.raster(as.raster(readPNG(img)), interpolate = FALSE) # generate raster graph R> dev.off() # turn off first device By default, the interpolate argument to grid.raster is TRUE, which means that what is actually drawn by R is a linear interpolation of the pixels in the original image. Setting interpolate to FALSE uses a sample from the pixels in the original image.A list of graphics devices available in R can be found in the Devices help file from the grDevices package: R> help(Devices)

Read the article

Olympics data available for all on Windows Azure SQL Database and Power View

- by jamiet

Are you looking around for some decent test data for your BI demos? Well, if so, Microsoft have provided some data about all medals won at the Olympics Games (1900 to 2008) at OlympicsData workbook - Excel, SSIS, Azure sample; it provides analysis over athletes, countries, medal type, sport, discipline and various other dimensions. The data has been provided in an Excel workbook along with instructions on how to load the data into a Windows Azure SQL Database using SQL Server Integration Services (SSIS). Frankly though, the rigmarole of standing up your own Windows Azure SQL Database ok, SQL Azure database, is both costly (SQL Azure isn’t free) and time consuming (the provided instructions aren’t exactly an idiot’s guide and getting SSIS to work properly with Excel isn’t a barrel of laughs either). To ease the pain for all you BI folks out there that simply want to party on the data I have loaded it all into the SQL Azure database that I use for hosting AdventureWorks on Azure. You can read more about AdventureWorks on Azure below however I’ll summarise here by saying it is a SQL Azure database provided for the use of the SQL Server community and which is supported by voluntary donations. To view the data the credentials you need are: Server mhknbn2kdz.database.windows.net Database AdventureWorks2012 User sqlfamily Password sqlf@m1ly Type those into SSMS and away you go, the data is provided in four tables [olympics].[Sport], [olympics].[Discipline], [olympics].[Event] & [olympics].[Medalist]: I figured this would be a good candidate for a Power View report so I fired up Excel 2013 and built such a report to slice’n’dice through the data – here are some screenshots that should give you a flavour of what is available: A view of all the available data Where do all the gymastics medals go? Which countries do top ten all-time medal winners come from? You get the idea. There is masses of information here and if you have Excel 2013 handy Power View provides a quick and easy way of surfing through it. To save you the bother of setting up the Power View report yourself you can have the one that I took these screenshots from, it is available on my SkyDrive at OlympicsAnalysis.xlsx so just hit the link and download to play to your heart’s content. Party on, people! As I said above the data is hosted on a SQL Azure database that I use for hosting “AdventureWorks on Azure” which I first announced in March 2013 at AdventureWorks2012 now available for all on SQL Azure. I’ll repeat the pertinent parts of that blog post here: I am pleased to announce that as of today … [AdventureWorks2012] now resides on SQL Azure and is available for anyone, absolutely anyone, to connect to and use for their own means. This database is free for you to use but SQL Azure is of course not free so before I give you the credentials please lend me your ears eyes for a short while longer. AdventureWorks on Azure is being provided for the SQL Server community to use and so I am hoping that that same community will rally around to support this effort by making a voluntary donation to support the upkeep which, going on current pricing, is going to be $119.88 per year. If you would like to contribute to keep AdventureWorks on Azure up and running for that full year please donate via PayPal to [email protected] Any amount, no matter how small, will help. If those 50+ people that retweeted me beforehand all contributed $2 then that would just about be enough to keep this up for a year. If the community contributes more than we need then there are a number of additional things that could be done: Host additional databases (Northwind anyone??) Host in more datacentres (this first one is in Western Europe) Make a charitable donation That last one, a charitable donation, is something I would really like to do. The SQL Community have proved before that they can make a significant contribution to charitable orgnisations through purchasing the SQL Server MVP Deep Dives book and I harbour hopes that AdventureWorks on Azure can continue in that vein. So please, if you think AdventureWorks on Azure is something that is worth supporting please make a contribution. I’d like to emphasize that last point. If my hosting this Olympics data is useful to you please support this initiative by donating. Thanks in advance. @Jamiet

Read the article

Wireless device bug on 13.10. BCM4313 registers as eth1 instead of wlan0 and no internet access

- by user205691

My Hotel wiFi requires me to login with a username & password after connecting to the hotspot. So, my browser would open a page with username & passwrd fields to login and then connect to internet. But unfortunately, firefox & chromium dont seem to work. i dont think it is browser related but a setting for the wifi router or driver which is creating this issue. using Broadcom 801.11 STA wireless driver (proprietary). tried open source as well but same result !! The image linked below shows my wifi connection setting & Chromium. The login page itself comes up after a long time and after entering the credentials, it keeps loading for ever !! it is the same case for every other browser.. so i dont think its browser issue but something to do with wifi setting or network manager stuff.. interestingly, i am able to connect to WiFi networks with WPA key without any issue. Adhoc hotspot is a problem and that is my regular home network :( .. I hope i can get some help solving this issue ! I have tried repeating the same hotspot after login from my android, by creating a virtual repeater with WPA key and it works. I can browse on ubuntu using this method.. but cant be doing this regularly ! I tried loading the same login page of the hotel wifi while browsing through my repeater wifi created on mobile and screen shot attached below. the page loads up quick and easy.. so this means something is wrong with the way network manager handles adhoc connectivity & login ?? i installed wicd0 but it crashes on startup and not helpful at all ! Screenshot of Chromium page Login page with repeated hotspot ifconfig in my terminal results: krishna@krishna-HP-ENVY-4-Notebook-PC:~$ ifconfig eth0 Link encap:Ethernet HWaddr 28:92:4a:1d:54:fa UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr e0:06:e6:89:fa:49 inet addr:10.24.1.71 Bcast:10.24.1.255 Mask:255.255.255.0 inet6 addr: fe80::e206:e6ff:fe89:fa49/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10940 errors:0 dropped:0 overruns:0 frame:348431 TX packets:6611 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7669631 (7.6 MB) TX bytes:864195 (864.1 KB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:2146 errors:0 dropped:0 overruns:0 frame:0 TX packets:2146 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:166120 (166.1 KB) TX bytes:166120 (166.1 KB) I wonder why is the wireless configured under eth1 ? I think this is a bug with earlier ubuntu versions, but is this normal in 13.10 or is there a wrong configuration here ? The wireless device in my pc is BCM4313 and i have installed the bcmwl-kernel-sources, wireless-tools to support the device. i also reinstalled the bcmwl-kernel as suggested on broadcom website, via synaptic package manager. Nothing has changed this situation ! I tried booting into liveUSB and then ifconfig results show wireless under wlan0. But then the wireless connects and loads the login page. So is the problem with the device configuration now ? i really want to get this fixed before i start configuring the other stuff like ATI graphics and such on the laptop for overheating.. lack of internet access is too bad a bug for me :P any help is appreciated!

Read the article

Windows Phone 7 and WS-Trust

- by Your DisplayName here!

A question that I often hear these days is: “Can I connect a Windows Phone 7 device to my existing enterprise services?”. Well – since most of my services are typically issued token based, this requires support for WS-Trust and WS-Security on the client. Let’s see what’s necessary to write a WP7 client for this scenario. First I converted the Silverlight library that comes with the Identity Training Kit to WP7. Some things are not supported in WP7 WCF (like message inspectors and some client runtime hooks) – but besides that this was a simple copy+paste job. Very nice! Next I used the WSTrustClient to request tokens from my STS: private WSTrustClient GetWSTrustClient() { var client = new WSTrustClient( new WSTrustBindingUsernameMixed(), new EndpointAddress("https://identity.thinktecture.com/…/issue.svc/mixed/username"), new UsernameCredentials(_txtUserName.Text, _txtPassword.Password)); return client; } private void _btnLogin_Click(object sender, RoutedEventArgs e) { _client = GetWSTrustClient(); var rst = new RequestSecurityToken(WSTrust13Constants.KeyTypes.Bearer) { AppliesTo = new EndpointAddress("https://identity.thinktecture.com/rp/") }; _client.IssueCompleted += client_IssueCompleted; _client.IssueAsync(rst); } I then used the returned RSTR to talk to the WCF service. Due to a bug in the combination of the Silverlight library and the WP7 runtime – symmetric key tokens seem to have issues currently. Bearer tokens work fine. So I created the following binding for the WCF endpoint specifically for WP7. <customBinding> <binding name="mixedNoSessionBearerBinary"> <security authenticationMode="IssuedTokenOverTransport" messageSecurityVersion="WSSecurity11 WSTrust13 WSSecureConversation13 WSSecurityPolicy12 BasicSecurityProfile10"> <issuedTokenParameters keyType="BearerKey" /> </security> <binaryMessageEncoding /> <httpsTransport/> </binding> </customBinding> The binary encoding is not necessary, but will speed things up a little for mobile devices. I then call the service with the following code: private void _btnCallService_Click(object sender, RoutedEventArgs e) { var binding = new CustomBinding( new BinaryMessageEncodingBindingElement(), new HttpsTransportBindingElement()); _proxy = new StarterServiceContractClient( binding, new EndpointAddress("…")); using (var scope = new OperationContextScope(_proxy.InnerChannel)) { OperationContext.Current.OutgoingMessageHeaders.Add(new IssuedTokenHeader(Globals.RSTR)); _proxy.GetClaimsAsync(); } } works. download

Read the article

Getting Audio from a Zone

- by bleonard

Now that I have Firefox and Java Web Start running from a zone, the last piece of the puzzle was audio (essential because most Flash content is accompanied by sound). In the global zone there's a nice little utility called audiotest for testing your sound: bleonard@solaris:~$ audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 47727.00 Hz (-0.57%)> *** All tests completed OK *** Of course, before you can try audiotest in a zone, it must be installed: root@myzone:~# pkg install audio-utilities Packages to install: 1 Create boot environment: No DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 6/6 0.4/0.4 PHASE ACTIONS Install Phase 20/20 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 However, we'll need to do more than just install audiotest: root@myzone:~# audiotest /dev/mixer: No such file or directory The device file is missing from /dev. The audio devices also need to be added to the zone. For this we modify the zone configuration as follows: bleonard@solaris:~$ sudo zonecfg -z myzone Password: zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/audio* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sound/* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/mixer* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sndstat zonecfg:myzone:device> end zonecfg:myzone> verify zonecfg:myzone> exit Then reboot the zone: bleonard@solaris:~$ sudo zoneadm -z myzone reboot After which, audiotest should work: root@myzone:~# audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 48208.00 Hz (0.43%)> *** All tests completed OK *** You can also examine /dev/sndstat for additional information: root@myzone:~# cat /dev/sndstat SunOS Audio Framework Audio Devices: 0: audio810#0 Intel AC'97, ICH (DUPLEX) Mixers: 0: audio810#0 Intel AC'97, ICH AC'97 codec: SigmaTel STAC9700 However, when testing the sound from Firefox (from a user account other than root), such as this recent Flash presentation on Solaris availability, you may still be disappointed. This is simply a permissions problem, as the devices only have read and write permissions for root: root@myzone:~# ls -l /dev/audio* crw------- 1 root root 99, 3 Jul 1 10:21 /dev/audio crw------- 1 root root 99, 4 Jul 1 10:21 /dev/audioctl To address this: root@myzone:~# chmod 777 /dev/audio* root@myzone:~# chmod 777 /dev/sound/* And you should be all set.

Read the article

Html.ValidationSummary and Multiple Forms

- by MightyZot

Originally posted on: http://geekswithblogs.net/MightyZot/archive/2013/11/11/html.validationsummary-and-multiple-forms.aspxThe Html.ValidationSummary helper writes a div with a list of general errors added to the model state while a request is being serviced. There is generally one form per view or partial view, I think, so often there is only one call to Html.ValidationSummary in the page resulting from the assembly of your views. And, consequently, there is no problem with the markup that Html.ValidationSummary spits out as a result. What if you want to put multiple forms in one view? Even if you create a view model that’s an aggregate of the view models for each form, the error validation summary is going to contain errors from both forms. Check out this screen shot, which shows a page with multiple forms. Notice how the error validation summary shows up twice. Grrr! Errors for the login form also show up in the registration form. Luckily, there is an easy way around this. Pull the errors out of the model state and separate them for each form. You’ll need to identify the appropriate form by setting the key when you make calls to ModelState.AddModelError. Assume in my example that errors for the login form are added to model state using the “LoginForm” key. And, likewise, assume that errors for the registration form are added to model state using the “RegistrationForm” key. An example of that might look like this… // If we got this far, something failed, redisplay form ModelState.AddModelError("LoginForm", "User name or password is not right..."); return View(model); Over in the code for your View, you can pull each form’s errors from the model state using lambda expressions that look like these… var LoginFormErrors = ViewData.ModelState.Where(ms => ms.Key == "LoginForm"); var RegistrationFormErrors = ViewData.ModelState.Where(ms => ms.Key == "RegistrationForm"); Now that you have two collections containing errors, you can display only the errors specific to each form. I’m doing that in my code by removing the calls to Html.ValidationSummary and replacing them with enumerators that look like this… if(LoginFormErrors.Count() > 0) { <div class="cdt-error-list"> <ul> @foreach (var entry in LoginFormErrors) { foreach (var error in entry.Value.Errors) { <li>@error.ErrorMessage</li> } } </ul> </div> } …and for the registration form, the code looks like this… @if(RegistrationFormErrors.Count() > 0) { <div class="cdt-error-list"> <ul> @foreach (var entry in RegistrationFormErrors) { foreach (var error in entry.Value.Errors) { <li>@error.ErrorMessage</li> } } </ul> </div> } The result is a nice clean separation of the list of errors that are specific to each form. And, this is important because each form is submitted separately in my case, so both forms don’t generate errors in the same context. As you’ll see in the screen shot below, errors added to the model state when the login form is submitted do not show up in the registration form’s validation summary.

Read the article

Cloud – the forecast is improving

- by Rob Farley

There is a lot of discussion about “the cloud”, and how that affects people’s data stories. Today the discussion enters the realm of T-SQL Tuesday, hosted this month by Jorge Segarra. Over the years, companies have invested a lot in making sure that their data is good, and I mean every aspect of it – the quality of it, the security of it, the performance of it, and more. Experts such as those of us at LobsterPot Solutions have helped these companies with this, and continue to work with clients to make sure that data is a strong part of their business, not an oversight. Whether business intelligence systems are being utilised or not, every business needs to be able to rely on its data, and have the confidence in it. Data should be a foundation upon which a business is built. In the past, data had been stored in paper-based systems. Filing cabinets stored vital information. Today, people have server rooms with storage of various kinds, recognising that filing cabinets don’t necessarily scale particularly well. It’s easy to ‘lose’ data in a filing cabinet, when you have people who need to make sure that the sheets of paper are in the right spot, and that you know how things are stored. Databases help solve that problem, but still the idea of a large filing cabinet continues, it just doesn’t involve paper. If something happens to the physical ‘filing cabinet’, then the problems are larger still. Then the data itself is under threat. Many clients have generators in case the power goes out, redundant cables in case the connectivity dies, and spare servers in other buildings just in case they’re required. But still they’re maintaining filing cabinets. You see, people like filing cabinets. There’s something to be said for having your data ‘close’. Even if the data is not in readable form, living as bits on a disk somewhere, the idea that its home is ‘in the building’ is comforting to many people. They simply don’t want to move their data anywhere else. The cloud offers an alternative to this, and the human element is an obstacle. By leveraging the cloud, companies can have someone else look after their filing cabinet. A lot of people really don’t like the idea of this, partly because the administrators of the data, those people who could potentially log in with escalated rights and see more than they should be allowed to, who need to be trusted to respond if there’s a problem, are now a faceless entity in the cloud. But this doesn’t mean that the cloud is bad – this is simply a concern that some people may have. In new functionality that’s on its way, we see other hybrid mechanisms that mean that people can leverage parts of the cloud with less fear. Companies can use cloud storage to hold their backup data, for example, backups that have been encrypted and are therefore not able to be read by anyone (including administrators) who don’t have the right password. Companies can have a database instance that runs locally, but which has its data files in the cloud, complete with Transparent Data Encryption if needed. There can be a higher level of control, making the change easier to accept. Hybrid options allow people who have had fears (potentially very justifiable) to take a new look at the cloud, and to start embracing some of the benefits of the cloud (such as letting someone else take care of storage, high availability, and more) without losing the feeling of the data being close. @rob_farley

Read the article

How can I change the color of the text in my iFrame? [closed]

- by VinylScratch

I have code here: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <title>Frag United Banlist</title> </head> <body> <h1>Tekkit Banlist</h1> <?php // change these things $server = "server-host"; $dbuser = "correct-user"; $dbpass = "correct-password"; $dbname = "correct-database"; mysql_connect($server, $dbuser, $dbpass); mysql_select_db($dbname); $result = mysql_query("SELECT * FROM banlist ORDER BY id DESC"); //This will display the most recent by id edit this query how you see fit. Limit, Order, ect. echo "<table width=100% border=1 cellpadding=3 cellspacing=0>"; echo "<tr style=\"font-weight:bold\"> <td>ID</td> <td>User</td> <td>Reason</td> <td>Admin/Mod</td> <td>Time</td> <td>Ban Length</td> </tr>"; while($row = mysql_fetch_assoc($result)){ if($col == "#eeeeee"){ $col = "#ffffff"; }else{ $col = "#eeeeee"; } echo "<tr bgcolor=$col>"; echo "<td>".$row['id']."</td>"; echo "<td>".$row['user']."</td>"; echo "<td>".$row['reason']."</td>"; echo "<td>".$row['admin']."</td>"; //Convert Epoch Time to Standard format $datetime = date("F j, Y, g:i a", $row['time']); echo "<td>$datetime</td>"; $dateconvert = date("F j, Y, g:i a", $row['length']); if($row['length'] == "0"){ echo "<td>None</td>"; }else{ echo "<td>$dateconvert</td>"; } echo "<td>".$row['id']."</td>"; echo "</tr>"; } echo"</table>" ?> </div> </body></html> And I am trying to make it so that when I put it in this iframe: <iframe src="http://bans.fragunited.net/" width="100%" length="100%"><p>Your browser does not support iframes.</p></iframe> But if you go to this page, fragunited.net/bans, (not bans.fragunited.net) the text is black and I want it to be white so you can actually see it. Sorry for the large amount of code, however I don't know where you have to put the code to change the color.

Read the article

Mounting NAS share: Bad Address

- by Korben

I've faced to the problem that can't solve. Hope you can help me with it. I have a storage QNAP TS-459U, with it's own Linux, and 'massive1' folder shared, which I need to mount to my Debian server. They are connected by regular patch cord. Debian server has two network interfaces - eth0 and eth1. eth0 is for Internet, eth1 is for QNAP. So, I'm saying this: mount -t cifs //169.254.100.100/massive1/ /mnt/storage -o user=admin , where 169.254.100.100 is an IP of QNAP's interface. The result I get (after entering password): mount error(14): Bad address Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Tried: mount.cifs, smbmount, with '/' at the end of the network share and without it, and many other variations of that command. And always its: mount error(14): Bad address Funny thing is when I was in Data Center, I had connected my netbook to QNAP by the same scheme (with Fedora 16 on it), and it connected without any problems, I could read/write files on the QNAP's NAS share! So I'm really stuck with the Debian. I can't undrestand where's the difference with Fedora, making this error. Yeah, I've used Google. Couldn't find any useful info. Ping to the QNAP's IP is working, I can log into QNAP's Linux by ssh, telnet on 139's port is working. This is network interface configuration I use in Debian: IP: 169.254.100.1 Netmask: 255.255.0.0 The only diffence in connecting to Fedora and Debian is that in Fedora I've added gateway - 169.254.100.129, but ping to this IP is not working, so I think it's not necessary at all. P.S. ~# cat /etc/debian_version wheezy/sid ~# uname -a Linux host 2.6.32-5-openvz-amd64 #1 SMP Mon Mar 7 22:25:57 UTC 2011 x86_64 GNU/Linux ~# smbtree WORKGROUP \\HOST host server \\HOST\IPC$ IPC Service (host server) \\HOST\print$ Printer Drivers NAS \\MASSIVE1 NAS Server \\MASSIVE1\IPC$ IPC Service (NAS Server) \\MASSIVE1\massive1 \\MASSIVE1\Network Recycle Bin 1 [RAID5 Disk Volume: Drive 1 2 3 4] \\MASSIVE1\Public System default share \\MASSIVE1\Usb System default share \\MASSIVE1\Web System default share \\MASSIVE1\Recordings System default share \\MASSIVE1\Download System default share \\MASSIVE1\Multimedia System default share Please, help me with solving this strange issue. Thanks before.

Read the article

System Account Logon Failures ever 30 seconds

- by floyd

We have two Windows 2008 R2 SP1 servers running in a SQL failover cluster. On one of them we are getting the following events in the security log every 30 seconds. The parts that are blank are actually blank. Has anyone seen similar issues, or assist in tracking down the cause of these events? No other event logs show anything relevant that I can tell. Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 10/17/2012 10:02:04 PM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: SERVERNAME.domainname.local Description: An account failed to log on. Subject: Security ID: SYSTEM Account Name: SERVERNAME$ Account Domain: DOMAINNAME Logon ID: 0x3e7 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Account Domain: Failure Information: Failure Reason: Unknown user name or bad password. Status: 0xc000006d Sub Status: 0xc0000064 Process Information: Caller Process ID: 0x238 Caller Process Name: C:\Windows\System32\lsass.exe Network Information: Workstation Name: SERVERNAME Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: Schannel Authentication Package: Kerberos Transited Services: - Package Name (NTLM only): - Key Length: 0 Second event which follows every one of the above events Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 10/17/2012 10:02:04 PM Event ID: 4625 Task Category: Logon Level: Information Keywords: Audit Failure User: N/A Computer: SERVERNAME.domainname.local Description: An account failed to log on. Subject: Security ID: NULL SID Account Name: - Account Domain: - Logon ID: 0x0 Logon Type: 3 Account For Which Logon Failed: Security ID: NULL SID Account Name: Account Domain: Failure Information: Failure Reason: An Error occured during Logon. Status: 0xc000006d Sub Status: 0x80090325 Process Information: Caller Process ID: 0x0 Caller Process Name: - Network Information: Workstation Name: - Source Network Address: - Source Port: - Detailed Authentication Information: Logon Process: Schannel Authentication Package: Microsoft Unified Security Protocol Provider Transited Services: - Package Name (NTLM only): - Key Length: 0 EDIT UPDATE: I have a bit more information to add. I installed Network Monitor on this machine and did a filter for Kerberos traffic and found the following which corresponds to the timestamps in the security audit log. A Kerberos AS_Request Cname: CN=SQLInstanceName Realm:domain.local Sname krbtgt/domain.local Reply from DC: KRB_ERROR: KDC_ERR_C_PRINCIPAL_UNKOWN I then checked the security audit logs of the DC which responded and found the following: A Kerberos authentication ticket (TGT) was requested. Account Information: Account Name: X509N:<S>CN=SQLInstanceName Supplied Realm Name: domain.local User ID: NULL SID Service Information: Service Name: krbtgt/domain.local Service ID: NULL SID Network Information: Client Address: ::ffff:10.240.42.101 Client Port: 58207 Additional Information: Ticket Options: 0x40810010 Result Code: 0x6 Ticket Encryption Type: 0xffffffff Pre-Authentication Type: - Certificate Information: Certificate Issuer Name: Certificate Serial Number: Certificate Thumbprint: So appears to be related to a certificate installed on the SQL machine, still dont have any clue why or whats wrong with said certificate. It's not expired etc.

Read the article

Encouter error "Linux ip -6 addr add failed" while setting up OpenVPN client

- by Mickel

I am trying to set up my router to use OpenVPN and have gotten quite far (I think), but something seems to be missing and I am not sure what. Here is my configuration for the client: client dev tun proto udp remote ovpn.azirevpn.net 1194 remote-random resolv-retry infinite auth-user-pass /tmp/password.txt nobind persist-key persist-tun ca /tmp/AzireVPN.ca.crt remote-cert-tls server reneg-sec 0 verb 3 OpenVPN client log: Nov 8 15:45:13 rc_service: httpd 15776:notify_rc start_vpnclient1 Nov 8 15:45:14 openvpn[27196]: OpenVPN 2.3.2 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [EPOLL] [MH] [IPv6] built on Nov 1 2013 Nov 8 15:45:14 openvpn[27196]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts Nov 8 15:45:14 openvpn[27196]: Socket Buffers: R=[116736->131072] S=[116736->131072] Nov 8 15:45:14 openvpn[27202]: UDPv4 link local: [undef] Nov 8 15:45:14 openvpn[27202]: UDPv4 link remote: [AF_INET]178.132.75.14:1194 Nov 8 15:45:14 openvpn[27202]: TLS: Initial packet from [AF_INET]178.132.75.14:1194, sid=44d80db5 8b36adf9 Nov 8 15:45:14 openvpn[27202]: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=1, C=RU, ST=Moscow, L=Moscow, O=Azire Networks, OU=VPN, CN=Azire Networks, name=Azire Networks, [email protected] Nov 8 15:45:14 openvpn[27202]: Validating certificate key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has key usage 00a0, expects 00a0 Nov 8 15:45:14 openvpn[27202]: VERIFY KU OK Nov 8 15:45:14 openvpn[27202]: Validating certificate extended key usage Nov 8 15:45:14 openvpn[27202]: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication Nov 8 15:45:14 openvpn[27202]: VERIFY EKU OK Nov 8 15:45:14 openvpn[27202]: VERIFY OK: depth=0, C=RU, ST=Moscow, L=Moscow, O=AzireVPN, OU=VPN, CN=ovpn, name=ovpn, [email protected] Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Nov 8 15:45:15 openvpn[27202]: Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Nov 8 15:45:15 openvpn[27202]: Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 2048 bit RSA Nov 8 15:45:15 openvpn[27202]: [ovpn] Peer Connection Initiated with [AF_INET]178.132.75.14:1194 Nov 8 15:45:17 openvpn[27202]: SENT CONTROL [ovpn]: 'PUSH_REQUEST' (status=1) Nov 8 15:45:17 openvpn[27202]: PUSH: Received control message: 'PUSH_REPLY,ifconfig-ipv6 2a03:8600:1001:4010::101f/64 2a03:8600:1001:4010::1,route-ipv6 2000::/3 2A03:8600:1001:4010::1,redirect-gateway def1 bypass-dhcp,dhcp-option DNS 194.1.247.30,tun-ipv6,route-gateway 178.132.77.1,topology subnet,ping 3,ping-restart 15,ifconfig 178.132.77.33 255.255.255.192' Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: timers and/or timeouts modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ifconfig/up options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: route-related options modified Nov 8 15:45:17 openvpn[27202]: OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Nov 8 15:45:17 openvpn[27202]: TUN/TAP device tun0 opened Nov 8 15:45:17 openvpn[27202]: TUN/TAP TX queue length set to 100 Nov 8 15:45:17 openvpn[27202]: do_ifconfig, tt->ipv6=1, tt->did_ifconfig_ipv6_setup=1 Nov 8 15:45:17 openvpn[27202]: /usr/sbin/ip link set dev tun0 up mtu 1500 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip addr add dev tun0 178.132.77.33/26 broadcast 178.132.77.63 Nov 8 15:45:18 openvpn[27202]: /usr/sbin/ip -6 addr add 2a03:8600:1001:4010::101f/64 dev tun0 Nov 8 15:45:18 openvpn[27202]: Linux ip -6 addr add failed: external program exited with error status: 254 Nov 8 15:45:18 openvpn[27202]: Exiting due to fatal error Any ideas are most welcome!

Search Results

Search found 14302 results on 573 pages for 'saved password'.

Page 521/573 | < Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528 | Next Page >

- by Kkelk

- by cibrax

- by Laurent Bugnion

- by Frankenmartin

- by tsukune1791

- by jamiet

- by Antillar Maximus

- by Scott Dorman

- by Tenken

- by Shay Shmeltzer

- by AndyL-Oracle

- by Mike.Hallett(at)Oracle-BI&EPM

- by statquant

- by Cachirro

- by Sherry LaMonica

- by jamiet

- by user205691

- by Your DisplayName here!

- by bleonard

- by MightyZot

- by Rob Farley

- by VinylScratch

- by Korben

- by floyd

- by Mickel

< Previous Page | 517 518 519 520 521 522 523 524 525 526 527 528 | Next Page >