Search Results

Search found 6999 results on 280 pages for 'ie7 bug'.

Page 53/280 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• what type of bug causes a program to slowly use more processor power and all of a sudden go to 100%?

  - by reinier

  Hi, I was hoping to get some good ideas as to what might be causing a really nasty bug. This is a program which is transmitting data over a socket, and also receives messages back. I could explain lots more, but I don't think this will help here. I'm just searching for hypothetical problems which can cause the following behaviour: program runs processor time slowly accumulates (till around 60%) all of a sudden (could be after 30 but also after 60 seconds) the processor time shoots to 100%. the program halts completely In my syslog it always ends on one line with a memory allocation (something similar to: myArray = new byte[16384]) in the same thread. now here is the weird part: if I set the debugger anywhere...it immediately stops on that line. So just the act of setting a breakpoint, made the thread continue (it wasn't running since I saw no log output anymore) I was thinking 'deadlock' but that would not cause 100% processor power. If anything, the opposite. Also, setting a breakpoint would not cause a deadlock to end. anyone else a theoretical suggestion as to what kind of 'construct' might cause this effect? (apart from 'bad programming') ;^) thanks EDIT: I just noticed.... by setting the sendspeed slower, the problem shows itself much later than expected. I would think around the same amount of packets send...but no the amount of packets send is much higher this way before it has the same problem.

  Read the article

• ASP.NET MVC Ajax.BeginForm eats params of submit button clicked. Looks like bug.

  - by RonnBlack

  If you are using Ajax.BeginForm() with multiple submit buttons similar to this: // View.aspx <% using (Ajax.BeginForm("Action", "Controller", new AjaxOptions { UpdateTargetId = "MyControl", })) { %> <span id="MyControl"> <% Html.RenderPartial("MyControl"); %> </span> <% } %> //MyControl.ascx <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> <input name="prev" type="submit" value="prev" /> <input name="next" type="submit" value="next" /> //... Everything is submitted to the controller fine but the params for the submit button that was clicked are absent from the Request. In otherwords Request["next"] and Request["prev"] are always null. I looked in to the JavaScript in Microsoft.MvcAjax.js and it looks like the function Sys_Mvc_MvcHelpers$_serializeForm completely skips over the inputs that are of type 'submit'. This doesn't seem logical at all. How else can you find out what button has been clicked? It looks like a bug to me. Is there any logical reason to skip these form parameters?

  Read the article

• Does somebody know something about Flash-CS5' "multiple copies" bug?

  - by Slav

  I'm, generally, complaining, not asking, but if somebody will be able (Adobe isn't) to help - it will be perfect. I use Flash-CS5 IDE to compose .swc files to import it, then, into FlashDevelop. Evetyrhing works fine until SOMETIMES. About each 10th "Ctrl+S" (save) click Flash-CS5 duplicates ALL images (loaded .bmp, .jpg, .png... files) and names them like "Copy ..." where "..." is incrementing number. Furhtermore, Flash-CS5 creates duplications of some layers - other layers have duplications of items which put on them. Restoring project's state to previous (not copied) state - is the hell. This bug is not reproducible but it happens each 2 hours or so - both right after project's opening and after several hours of work. It happens on different machines - I know at least 5 people which told me that they also run into this issue and do not know how to escape it. Did somebody experienced it? Does somebody know how to handle it?

  Read the article

• ADO.NET zombie transaction bug? How to ensure that commands will not be executed on implicit transac

  - by TN

  e.g. When deadlock occurs, following SQL commands are successfully executed, even if they have assigned SQL transaction that is after rollback. It seems, it is caused by a new implicit transaction that is created on SQL Server. Someone could expect that ADO.NET would throw an exception that the commands are being executed on a zombie transaction. However, such exception is not thrown. (I think this is a bug in ASP.NET.) Moreover, because of zombie transaction the final Dispose() silently ignores the rollback. Any ideas, how can I ensure that nobody can execute commands on implicit transaction? Or, how to check that transaction is zombie? I found that Commit() and Rollback() check for zombie transaction, however I can call them for a test:) I also found that also reading IsolationLevel will do the check, but I am not sure whether simple calling transaction.IsolationLevel.ToString(); will not be removed by a future optimizer. Or do you know any other safe way invoke a getter (without using reflection or IL emitting)?

  Read the article

• (Not So) Silly Objective-C inheritance problem when using property - GCC Bug?

  - by Ben Packard

  Update 2 - Many people are insisting I need to declare an iVar for the property. Some are saying not so, as I am using Modern Runtime (64 bit). I can confirm that I have been successfully using @property without iVars for months now. Therefore, I think the 'correct' answer is an explanation as to why on 64bit I suddenly have to explicitly declare the iVar when (and only when) i'm going to access it from a child class. The only one I've seen so far is a possible GCC bug (thanks Yuji). Not so simple after all... Update - I messed up one line of the original copy and paste - corrected. The @property call was missing (nonatomic, retain) but is a red herring - STILL NEED AN ANSWER! Thanks. I've been scratching my head with this for a couple of hours - I haven't used inheritance much. Here I have set up a simple Test B class that inherits from Test A, where an ivar is declared. But I get the compilation error that the variable is undeclared. This only happens when I add the property and synthesize declarations - works fine without them. TestA Header: #import <Cocoa/Cocoa.h> @interface TestA : NSObject { NSString *testString; } @end TestA Implementation is empty: #import "TestA.h" @implementation TestA @end TestB Header: #import <Cocoa/Cocoa.h> #import "TestA.h" @interface TestB : TestA { } @property (nonatomic, retain) NSString *testProp; @end TestB Implementation (Error - 'testString' is undeclared) #import "TestB.h" @implementation TestB @synthesize testProp; - (void)testing{ NSLog(@"test ivar is %@", testString); } @end

  Read the article

• Loading Native library to external Package in Eclipse not working. is it a Bug?

  - by TacB0sS

  I was about to report a but to Eclipse, but I was thinking to give this a chance here first: If I add an external package, the application cannot find the referenced native library, except in the case specified at the below: If my workspace consists of a single project, and I import an external package 'EX_package.jar' from a folder outside of the project folder, I can assign a folder to the native library location via: mouse over package - right click - properties - Native Library - Enter your folder. This does not work. In runtime the application does not load the library, System.mapLibraryName(Path) also does not work. Further more, if I create a User Library, and add the package to it and define a folder for the native library it still does not. If it works for you then I have a major bug since it does not work on my computer I test this in any combination I could think of, including adding the path to the windows PATH parameter, and so many other ways I can't even start to remember, nothing worked, I played with this for hours and had a colleague try to assist me, but we both came up empty. Further more, if I have a main project that is dependent on few other projects in my workspace, and they all need to use the same 'EX_package.jar' I MUST supply a HARD COPY INTO EACH OF THEM, it will ONLY (I can't stress the ONLYNESS, I got freaked out by this) work if I have a hard copy of the package in ALL of the project folders that the main project has a dependency on, and ONLY if I configure the Native path in each of them!! This also didn't do the trick. please tell me there is a solution to this, this drives me nuts... Thanks, Adam Zehavi.

  Read the article

• NSCollectionView: Can the same object not be in the array more than once or is this a bug?

  - by Sean

  I may be doing this all wrong, but I thought I was on the right track until I hit this little snag. Basically I was putting together a toy using NSCollectionView and trying to understand how to hook that all up using IB. I have a button which will add a couple of strings to the NSArrayController: The first time I press this button, my strings appear in the collection view as expected: The second time I press the button, the views scroll down and room is made - but the items don't appear to get added. I just see blank space: The button is implemented as follows (controller is a pointer to the NSArrayController I added in IB): - (IBAction)addStuff:(id)control { [controller addObjects:[NSArray arrayWithObjects:@"String 1",@"String 2",@"String 3",nil]]; } I'm not sure what I'm doing wrong. Rather than try to explain all the connections/binds/etc, if you need more info, I'd be grateful if you could just take a quick look at the toy project itself. UPDATE: After more experimentation as suggested by James Williams, it seems the problem stems from having multiple objects with the same memory address in the array. This confuses either NSArrayController or NSCollectionView (not sure which). Changing my addStuff: to this resulted in the behavior I originally expected: [controller addObjects:[NSArray arrayWithObjects:[NSMutableString stringWithString:@"String 1"],[NSMutableString stringWithString:@"String 2"],[NSMutableString stringWithString:@"String 3"],nil]]; So the question now, I guess, is if this is a bug I should report to Apple or if this is intended/documented behavior and I just missed it?

  Read the article

• Am I a discoverer of a bug in the WPF engine?

  - by bitbonk

  We have a MFC 8 application compiled with /CLR that contains a larger amount of Windows Forms UserControls wich again contain WPF user controls using ElementHost. Due to the architecture of our software we can not use HwndHost directly. We observed an extremely strange behavior here that we can not make any sense of: When the CPU load is very high during startup of the application and there are a lot live of ElementHost instances, the whole property engine completely stops working. For example animations that usually just work fine now never update the values of the bound properties, they just stay at some random value after startup. When I set a property that is not bound to anything the value is correctly stored in the dependency property (calling the getter returns the new value) but the visual representation never reflects that. I set the background to red but the background color does not change. We tested this on a lot of different machines all running Windows XP SP2 and it is pretty reproducible. The funny thing here is, that there is in fact one situation where the bound properties actually pickup a new value from the animation and the visual gets updated based on the property values. It is when I resize the ElementHost or when I hide and reshow the parent native control. As soon as I do this, properties that are bound to an animation pickup a new value and the visuals rerender based on the new property values - but just once - if I want to see another update I have to resize the ElementHost. Do you have any explanation of what could be happening here or how I could approach this problem to find it out? What can I do to debug this? Is there a way I can get more information about what WPF actually does or where WPF might have crashed? To me it currently seems like a bug in WPF itself since it only happens at high CPU load at startup.

  Read the article

• Is this a bug? Or is it a setting in ASP.NET 4 (or MVC 2)?

  - by John Gietzen

  I just recently started trying out T4MVC and I like the idea of eliminating magic strings. However, when trying to use it on my master page for my stylesheets, I get this: <link href="<%: Links.Content.site_css %>" rel="stylesheet" type="text/css" /> rending like this: <link href="&lt;%: Links.Content.site_css %>" rel="stylesheet" type="text/css" /> Whereas these render correctly: <link href="<%: Url.Content("~/Content/Site.css") %>" rel="stylesheet" type="text/css" /> <link href="<%: Links.Content.site_css + "" %>" rel="stylesheet" type="text/css" /> It appears that, as long as I have double quotes inside of the code segment, it works. But when I put anything else in there, it escapes the leading "less than". Is this something I can turn off? Is this a bug? Edit: This does not happen for <script src="..." ... />, nor does it happen for <a href="...">. Edit 2: Minimal case: <link href="<%: string.Empty %>" /> vs <link href="<%: "" %>" />

  Read the article

• Is there bug in the Matrix.RotateAt method for certain angles? .Net Winforms

  - by Jules

  Here's the code i'm using to rotate: Dim m As New System.Drawing.Drawing2D.Matrix Dim size = image.Size m.RotateAt(degreeAngle, New PointF(CSng(size.Width / 2), CSng(size.Height / 2))) Dim temp As New Bitmap(600, 600, Imaging.PixelFormat.Format32bppPArgb) Dim g As Graphics = Graphics.FromImage(temp) g.Transform = m g.DrawImage(image, 0, 0) (1) Disposals removed for brevity. (2) I test the code with a 200 x 200 rectangle. (3) Size 600,600 it just an arbitrary large value that I know will fit the right and bottom sides of the rotated image for testing purposes. (4) I know, with this code, the top and left edges will be clipped because I'm not transforming the orgin after the rotate. The problem only occurs at certain angles: (1) At 90, the right hand edge disappears completely. (2) At 180, the right and bottom edges are there, but very faded. (3) At 270, the bottom edge disappears completely. Is this a known bug? If I manually rotate the corners an draw the image by specifying an output rectangle, I don't get the same problem - though it is slightly slower than using RotateAt.

  Read the article

• Deleted array value still showing up on foreach loop in AS3 (bug in flash?)

  - by nexus

  It took me many hours to narrow down a problem in some code to this reproducible error, which seems to me like a bug in AVM2. Can anyone shed light on why this is occurring or how to fix it? When the value at index 1 is deleted and a value is subsequently set at index 0, the non-existent (undefined) value at index 1 will now show up in a foreach loop. I have only been able to produce this outcome with index 1 and 0 (not any other n and n-1). Run this code: package { import flash.display.Sprite; public class Main extends Sprite { public function Main():void { var bar : Array = new Array(6); out(bar); //proper behavior trace("bar[1] = 1", bar[1] = 1); out(bar); //proper behavior trace("delete bar[1]", delete bar[1]); out(bar); //proper behavior trace("bar[4] = 4", bar[4] = 4); out(bar); //for each loop will now iterate over the undefined position at index 1 trace("bar[0] = 0", bar[0] = 0); out(bar); trace("bar[3] = 3", bar[3] = 3); out(bar); } private function out(bar:Array):void { trace(bar); for each(var i : * in bar) { trace(i); } } } } It will give this output: ,,,,, bar[1] = 1 1 ,1,,,, 1 delete bar[1] true ,,,,, bar[4] = 4 4 ,,,,4, 4 bar[0] = 0 0 0,,,,4, 0 undefined 4 bar[3] = 3 3 0,,,3,4, 0 undefined 4 3

  Read the article

• Django GenericRelation doesn't save related object's id - is this a bug or am I doing it wrong?

  - by pinkeen

  I have a model with a generic relation (call it A), when creating an instance of this object I pass an instance of another model (call it B) as the initializer of the content_object field (via kwargs of the constructor). If I don't save B before creating A then when saving A the content_object_id is saved to the db as NULL. If I save B before passing it to the constructor of A then everything's allright. It's not logical. I assumed that the ID of the related object (B) is fetched when doing A.save() and it should throw some kind of an exception if B isn't saved yet but it just fails silently. I don't like the current solution (saving B beforhand) because we don't know yet if I will be always willing to keep the object, not just scrap it, and there are performance considerations - what if I will add some another data and save it once more shortly after. class BaseNodeData(models.Model): ... extnodedata_content_type = models.ForeignKey(ContentType, null=True) extnodedata_object_id = models.PositiveIntegerField(null=True) extnodedata = generic.GenericForeignKey(ct_field='extnodedata_content_type', fk_field='extnodedata_object_id') class MarkupNodeData(models.Model): raw_content = models.TextField() Suppose we do: markup = MarkupNodeData(raw_content='...') base = BaseNodeData(..., extnodedata=markup) markup.save() base.save() # both records are inserted to the DB but base is stored with extnodedata_object_id=NULL markup = MarkupNodeData(raw_content='...') base = BaseNodeData(..., extnodedata=markup) base.save() markup.save() # no exception is thrown and everything is the same as above markup = MarkupNodeData(raw_content='...') markup.save() base = BaseNodeData(..., extnodedata=markup) base.save() # this works as expected Of course I can do it this way, but it doesn't change anything: base = BaseNodeData(...) base.extnodedata = markup My question is - is this a bug in django which I should report or maybe I'm doing something wrong. Docs on GenericRelations aren't exactly verbose.

  Read the article

• Perl Moose::Util::TypeConstraints bug ? what is this error about the name has invalid chars ?

  - by alex8657

  That has been hours i am tracking a Moose::Util::TypeConstraints exceptions, i don't understand where it gets to check a type and tells me that the name is incorrect. I tracked the error to a reduced example to try to locate the problem, and it just shows me that i do not get it. Did i get to a Moose::Util::TypeConstraints bug ? aoffice:new alex$ perl -c ../codesnippets/typeconstrainterror.pl ../codesnippets/typeconstrainterror.pl syntax OK aoffice:new alex$ perl -d ../codesnippets/typeconstrainterror.pl (...) DB<1> r Something::File::LocalFile=HASH(0x100d1bfa8) contains invalid characters for a type name. Names can contain alphanumeric character, ":", and "." at /opt/local/lib/perl5/vendor_perl/5.10.1/darwin-multi-2level/Moose/Util/TypeConstraints.pm line 508 Moose::Util::TypeConstraints::_create_type_constraint('Something::File::LocalFile=HASH(0x100d1bfa8)', undef, undef, undef, undef) called at /opt/local/lib/perl5/vendor_perl/5.10.1/darwin-multi-2level/Moose/Util/TypeConstraints.pm line 285 Moose::Util::TypeConstraints::type('Something::File::LocalFile=HASH(0x100d1bfa8)') called at ../codesnippets/typeconstrainterror.pl line 7 Something::File::is_slink('Something::File::LocalFile=HASH(0x100d1bfa8)') called at ../codesnippets/typeconstrainterror.pl line 33 Debugged program terminated. Use q to quit or R to restart, use o inhibit_exit to avoid stopping after program termination, h q, h R or h o to get additional info. Below, the code that crashes: package Something::File; use Moose; has 'type' =>(is=>'ro', isa=>'Str', writer=>'_set_type' ); sub is_slink { my $self = shift; return ( $self->type eq 'slink' ); } no Moose; __PACKAGE__->meta->make_immutable; 1; package Something::File::LocalFile; use Moose; use Moose::Util::TypeConstraints; extends 'Something::File'; subtype 'PositiveInt' => as 'Int' => where { $_ >0 } => message { 'Only positive greater than zero integers accepted' }; no Moose; __PACKAGE__->meta->make_immutable; 1; my $a = Something::File::LocalFile->new; # $a->_set_type('slink'); print $a->is_slink ." end\n";

  Read the article

• GCC, -O2, and bitfields - is this a bug or a feature?

  - by Rooke

  Today I discovered alarming behavior when experimenting with bit fields. For the sake of discussion and simplicity, here's an example program: #include <stdio.h> struct Node { int a:16 __attribute__ ((packed)); int b:16 __attribute__ ((packed)); unsigned int c:27 __attribute__ ((packed)); unsigned int d:3 __attribute__ ((packed)); unsigned int e:2 __attribute__ ((packed)); }; int main (int argc, char *argv[]) { Node n; n.a = 12345; n.b = -23456; n.c = 0x7ffffff; n.d = 0x7; n.e = 0x3; printf("3-bit field cast to int: %d\n",(int)n.d); n.d++; printf("3-bit field cast to int: %d\n",(int)n.d); } The program is purposely causing the 3-bit bit-field to overflow. Here's the (correct) output when compiled using "g++ -O0": 3-bit field cast to int: 7 3-bit field cast to int: 0 Here's the output when compiled using "g++ -O2" (and -O3): 3-bit field cast to int: 7 3-bit field cast to int: 8 Checking the assembly of the latter example, I found this: movl $7, %esi movl $.LC1, %edi xorl %eax, %eax call printf movl $8, %esi movl $.LC1, %edi xorl %eax, %eax call printf xorl %eax, %eax addq $8, %rsp The optimizations have just inserted "8", assuming 7+1=8 when in fact the number overflows and is zero. Fortunately the code I care about doesn't overflow as far as I know, but this situation scares me - is this a known bug, a feature, or is this expected behavior? When can I expect gcc to be right about this? Edit (re: signed/unsigned) : It's being treated as unsigned because it's declared as unsigned. Declaring it as int you get the output (with O0): 3-bit field cast to int: -1 3-bit field cast to int: 0 An even funnier thing happens with -O2 in this case: 3-bit field cast to int: 7 3-bit field cast to int: 8 I admit that attribute is a fishy thing to use; in this case it's a difference in optimization settings I'm concerned about.

  Read the article

• Flex bug?? Get messed up stacked ColumnChart with type="100%"

  - by Nir

  I am trying to do a stacked Column chart with type="100%" and a mixture of positive and negative values. When all the values are positive, is functions well, but when negative numbers come to the game, it looks totally messed up. When I also look at Adobe documentation (look here), I see the following code for stacked column chart involving negative numbers: <?xml version="1.0"?> <!-- charts/StackedNegative.mxml --> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml"> <mx:Script><![CDATA[ import mx.collections.ArrayCollection; [Bindable] public var expenses:ArrayCollection = new ArrayCollection([ {Month:"Jan", Profit:-2000, Expenses:-1500}, {Month:"Feb", Profit:1000, Expenses:-200}, {Month:"Mar", Profit:1500, Expenses:-500} ]); ]]></mx:Script> <mx:Panel title="Column Chart"> <mx:ColumnChart id="myChart" dataProvider="{expenses}" showDataTips="true"> <mx:horizontalAxis> <mx:CategoryAxis dataProvider="{expenses}" categoryField="Month" /> </mx:horizontalAxis> <mx:series> <mx:ColumnSet type="stacked" allowNegativeForStacked="true"> <mx:series> <mx:ColumnSeries xField="Month" yField="Profit" displayName="Profit" /> <mx:ColumnSeries xField="Month" yField="Expenses" displayName="Expenses" /> </mx:series> </mx:ColumnSet> </mx:series> </mx:ColumnChart> <mx:Legend dataProvider="{myChart}"/> </mx:Panel> </mx:Application> It works fine. But try to change: <mx:ColumnSet type="stacked" allowNegativeForStacked="true"> to: <mx:ColumnSet type="100%" allowNegativeForStacked="true"> and you'll see that it doesn't on January data, where both values are negative, the chart shows as if they are positive, and on the other two where one value is positive and the other is negative, it shows only the positive part as 100%... Isn't it a Flex Bug? I have my own case with such data and it behaves wrong the same way. I'd expect that if it has 800 stacked on -200, it will show 80% up and 20% down, totalling 100%. BTW: Using Flex 4, though these are all mx components. Thanks a lot and regards from Berlin, Germany, Nir.

  Read the article

• Bug in Safari: options.length = 0; not working as expected in Safari 4

  - by Stefan

  This is not a real question, but rather an answer to save some others the hassle of tracking this nasty bug down. I wasted hours finding this out. When using options.length = 0; to reset all options of a select element in safari, you can get mixed results depending on wether you have the Web Inspector open or not. If the web inspector is open you use myElement.options.length = 0; and after that query the options.length(), you might get back 1 instead of 0 (expected) but only if the Web Inspector is open (which is often the case when debugging problem like this). Workaround: Close the Web Inspector or call myElement.options.length = 0; twice like so: myElement.options.length = 0; myElement.options.length = 0; Testcase: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN" "http://www.w3.org/TR/html4/strict.dtd"> <html> <head> <title>Testcase</title> <script type="text/javascript" language="javascript" charset="utf-8"> function test(el){ var el = document.getElementById("sel"); alert("Before calling options.length=" + el.options.length); el.options.length = 0; alert("After calling options.length=" + el.options.length); } </script> </head> <body onLoad="test();"> <p> Make note of the numbers displayed in the Alert Dialog, then open Web inspector, reload this page and compare the numbers. </p> <select id="sel" multiple> <option label="a----------" value="a"></option> <option label="b----------" value="b"></option> <option label="c----------" value="c"></option> </select> </body> </html>

  Read the article

• How to fix this Speech Recognition on C# wicked bug?

  - by aF

  Hello, I have this code in my C# project: public void startRecognition(string pName) { presentationName = pName; if (WaveNative.waveInGetNumDevs() > 0) { string grammar = System.Environment.GetEnvironmentVariable("PUBLIC") + "\\SoundLog\\Presentations\\" + presentationName + "\\SpeechRecognition\\soundlog.cfg"; if (File.Exists(grammar)) { File.Delete(grammar); } executeCommand(); /// Create an instance of SpSharedRecoContextClass which will be used /// to interface with the incoming audio stream recContext = new SpSharedRecoContextClass(); // Create the grammar object recContext.CreateGrammar(1, out recGrammar); //recContext.CreateGrammar(2, out recGrammar2); // Set up dictation mode //recGrammar2.SetDictationState(SpeechLib.SPRULESTATE.SPRS_ACTIVE); //recGrammar2.SetGrammarState(SPGRAMMARSTATE.SPGS_ENABLED); // Set appropriate grammar mode if (File.Exists(grammar)) { recGrammar.LoadCmdFromFile(grammar, SPLOADOPTIONS.SPLO_STATIC); //recGrammar.SetDictationState(SpeechLib.SPRULESTATE.SPRS_INACTIVE); recGrammar.SetGrammarState(SPGRAMMARSTATE.SPGS_ENABLED); recGrammar.SetRuleIdState(0, SPRULESTATE.SPRS_ACTIVE); } /// Bind a callback to the recognition event which will be invoked /// When a dictated phrase has been recognised. recContext.Recognition += new _ISpeechRecoContextEvents_RecognitionEventHandler(handleRecognition); // System.Windows.Forms.MessageBox.Show(recContext.ToString()); // gramática compilada } } private static void handleRecognition(int StreamNumber, object StreamPosition, SpeechLib.SpeechRecognitionType RecognitionType, SpeechLib.ISpeechRecoResult Result) { string temp = Result.PhraseInfo.GetText(0, -1, true); _recognizedText = ""; // System.Windows.Forms.MessageBox.Show(temp); // System.Windows.Forms.MessageBox.Show(recognizedWords.Count.ToString()); foreach (string word in recognizedWords) { if (temp.Contains(word)) { // System.Windows.Forms.MessageBox.Show("yes"); _recognizedText = word; } } } This codes generates a dll that I use in another application. Now, the wicked bug: - when I run the startRecognition method in the beginning of the execution of the other application, this codes works very well. But when I run it some time after the beginning, this codes works but the handleRecognition method is never called. I see that the words are recognized because they appear on the Microsoft Speech Recognition app, but the handler method is never called. Do you know what's the problem with this code? Thanks in advance :D

  Read the article

• CSS Div Width Problem - Lining divs... widths seem to be off in IE7

  - by jlrolin

  So far, I'm doing this programmatically using VB.net/ASP.net: 'Create Container Div Dim ContainerDiv As New HtmlGenericControl("div") ContainerDiv.Style("width") = "100%" ContainerDiv.Style("clear") = "both" ContainerDiv.Style("text-align") = "left" ContainerDiv.Style("margin") = "0" 'Create Expand/Collapse Image Dim img As New Image img.ImageUrl = Page.ResolveUrl("~/images/minus99.jpg") img.Attributes.Add("onclick", "change(this.parent);") 'Create Company Display Dim lbl As New Label lbl.Text = Parsetext(pc.NAME) lbl.Font.Bold = True lbl.Style("font-size") = "16px" Dim NameDiv As New HtmlGenericControl("div") 'NameDiv.Style("background-color") = "#F0D3D3" NameDiv.Style("width") = "375px" NameDiv.Style("float") = "left" NameDiv.Style("margin") = "0" NameDiv.Style("display") = "block" NameDiv.Controls.Add(img) NameDiv.Controls.Add(lbl) ContainerDiv.Controls.Add(NameDiv) Dim SetupDiv As New HtmlGenericControl("div") SetupDiv.Style("background-color") = "#F0D3D3" SetupDiv.Style("width") = "210px" SetupDiv.Style("float") = "left" SetupDiv.Style("margin") = "0" SetupDiv.Style("display") = "block" 'SetupDiv.Style("position") = "fixed" ContainerDiv.Controls.Add(SetupDiv) Dim UsedDiv As New HtmlGenericControl("div") UsedDiv.Style("background-color") = "#CFF5CE" UsedDiv.Style("width") = "140px" UsedDiv.Style("float") = "left" UsedDiv.Style("margin") = "0" UsedDiv.Style("display") = "block" 'UsedDiv.Style("position") = "fixed" ContainerDiv.Controls.Add(UsedDiv) Dim RemDiv As New HtmlGenericControl("div") RemDiv.Style("background-color") = "#BEE0F7" 'RemDiv.Style("position") = "absolute" RemDiv.Style("width") = "210px" RemDiv.Style("float") = "right" RemDiv.Style("padding") = "0" RemDiv.Style("margin") = "0" RemDiv.Style("display") = "block" 'RemDiv.Style("position") = "fixed" ContainerDiv.Controls.Add(RemDiv) This should give me four DIVS inside a container DIV. Here's what it's coming out as: The correct blocks above the non-inline blocks are from a table with the same exact widths as the ones I'm using on the Divs. There isn't any CSS adding pixels to them, I don't think. I need to line these up, and I can't figure out where my problem is here. Any help would be appreciated.

  Read the article

• Possible bug in ASP.NET MVC with form values being replaced.

  - by Dan Atkinson

  I appear to be having a problem with ASP.NET MVC in that, if I have more than one form on a page which uses the same name in each one, but as different types (radio/hidden/etc), then, when the first form posts (I choose the 'Date' radio button for instance), if the form is re-rendered (say as part of the results page), I seem to have the issue that the hidden value of the SearchType on the other forms is changed to the last radio button value (in this case, SearchType.Name). Below is an example form for reduction purposes. <% Html.BeginForm("Search", "Search", FormMethod.Post); %> <%= Html.RadioButton("SearchType", SearchType.Date, true) %> <%= Html.RadioButton("SearchType", SearchType.Name) %> <input type="submit" name="submitForm" value="Submit" /> <% Html.EndForm(); %> <% Html.BeginForm("Search", "Search", FormMethod.Post); %> <%= Html.Hidden("SearchType", SearchType.Colour) %> <input type="submit" name="submitForm" value="Submit" /> <% Html.EndForm(); %> <% Html.BeginForm("Search", "Search", FormMethod.Post); %> <%= Html.Hidden("SearchType", SearchType.Reference) %> <input type="submit" name="submitForm" value="Submit" /> <% Html.EndForm(); %> Resulting page source (this would be part of the results page) <form action="/Search/Search" method="post"> <input type="radio" name="SearchType" value="Date" /> <input type="radio" name="SearchType" value="Name" /> <input type="submit" name="submitForm" value="Submit" /> </form> <form action="/Search/Search" method="post"> <input type="hidden" name="SearchType" value="Name" /> <!-- Should be Colour --> <input type="submit" name="submitForm" value="Submit" /> </form> <form action="/Search/Search" method="post"> <input type="hidden" name="SearchType" value="Name" /> <!-- Should be Reference --> <input type="submit" name="submitForm" value="Submit" /> </form> Please can anyone else with RC1 confirm this? Maybe it's because I'm using an enum. I don't know. I should add that I can circumvent this issue by using 'manual' input () tags for the hidden fields, but if I use MVC tags (<%= Html.Hidden(...) %), .NET MVC replaces them every time. Many thanks. Update: I've seen this bug again today. It seems that this crops its head when you return a posted page and use MVC set hidden form tags with the Html helper. I've contacted Phil Haack about this, because I don't know where else to turn, and I don't believe that this should be expected behaviour as specified by David.

  Read the article

• Superfish drop down menu, how to fix z-index in ie6 and ie7?

  - by John Isaacks

  I am using the superfish plugin for jquery here: clicky it works fine in all modern browsers FF,Safari, Chrome, IE8 but it seems like the z-index is not working in ie6 and 7 you can see the menu is appearing, but being cut off by the elements below it. I have tried adding a z-index everywhere I can think of but nothing seems to fix this. How can I fix this? Thanks!!!

  Read the article

• Why IE7 is not respecting the z-index order?

  - by janoChen

  The #cm_sidebarDIV div has z-index 3; The .abouttop and .aboutlist divs have z-index 2 So #cm_sidebarDiv is at the top when it is displayed in Firefox and Chrome but in EI7 it remains at the bottom. #leftmanulist{ background:url("images/abouttop.gif") no-repeat; float: left; margin: 2px 2px 5px 30px; padding:39px 0 0 0; width:237px; } #leftmanulist ul li{line-height:35px;text-align:left; text-decoration:none;} #leftmanulist ul li a{ text-decoration:none;} #leftmanulist ul li:hover{ color:#0068FF;} #leftmanulist ul li a:hover{ color:#0068FF;} #leftmanulist ul li.index{ color:#0068FF;} #leftmanulist ul li.index a{ color:#0068FF;} .abouttop{background:url("images/leftmanulist_z.gif") repeat-y ; padding:0 6px; position:relative; z-index:2; width:237px;} .aboutlist{position:relative;left:28px;} .aboutbutton{background:url("images/leftmanulist_b.gif") no-repeat; width:237px; height:20px; position:relative; top:-17px; z-index:2;} .inword{color:#555555;font-size:0.92em;text-align:justify;line-height:24px;letter-spacing:1px; padding:30px 40px 0px 336px; } #cm_sidebarDIV { z-index: 3; } Any suggestions?

  Read the article

• Is there any cons to emulate IE=EmulateIE7 site rendering in IE8 as IE7?

  - by metal-gear-solid

  Or i should render as default(IE8)? <meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7" /> My purpose is to make site compatible with IE8 also.

  Read the article

• Why is this JQuery animation jumping in IE8 but working in all other browsers including IE7 and 6?

  - by Jared Christensen

  This one really has me stumped. For some reason when I animate the x and y scroll property at the same time it jumps in IE 8 but works in all other browsers. I'm hoping someone has run into this before and has a work around. Note: it works fine if I only animate the x or y by them selves. Please view this working example

  Read the article

• position:fixed on element in ie7/8 and problems with the scrolling of the content inside it

  - by jayarjo

  I got an element fixed in the center of the screen, having specific dimensions (let's say 500x500). The element has content, which is larger then the height of the element and thus causes scroll bar to appear, which is fine. In FF/WebKit everything works nice. However in IE 7/8 ... content of the fixed element doesn't scroll, or scrolls with HUGE delay. If I change position:fixed to position:absolute, it starts to scroll fine, but with position:fixed... it's just a pain!.. Is it some known issue? Anyone heard/encountered something like that? Any ideas how to deal with such?...

  Read the article

• Negative margins: can they work in IE7 and IE8?

  - by Haroldo

  I'm trying to have a kind of dirty underline effect using a string of hyphens, but I want it slightly closer to the multi-line title than the line-height. Negative margin works a treat in FF but no joy in IE? <p>a multiline title here<p><p style="margin: -7px 0px 10px 0px;">-----------------------------------------------------------------------------</p>

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >