Search Results

Search found 24853 results on 995 pages for 'multiple columns'.

Page 53/995 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

• How to force GNOME panels et. al. to display on a different monitor without mirroring?

  - by GrueKun

  So, I recently purchased a new 23" monitor for my PC. However, I can't use it with the PC currently as I am waiting on a replacement heatsink. In the mean time, I wanted to use it with my Dell laptop. I hooked it up to the VGA port, and it seems to be working properly. However, I wanted to know if there was a way I could move all of the main display elements over to the attached monitor? I wanted to shut the LCD panel off on the laptop and hook it up like a desktop. Relevant specs: Ubuntu 10.10 x64 Intel graphics chipset The attached monitor is currently set as the default monitor. Any suggestions are welcome. :)

  Read the article

• External HDMI poor quality

  - by paschoal

  When pluging an external HDMI display, it get detected and everything was supposed to be working right out of the box, except that when set the resolution to 1920x1080, the display on HDMI is really poor quality. Playing around with xrandr, when setting resolution at 1680x1050 or below, everything is smooth, when setting 1920x1080 or 1920x1080i, with wide variety of refresh rates, it's the same poor quality display. Unfortunely I can't post an image showing the exactly issue (low reputation). Specifications: Dell Inspiron 14 (Intel HD Graphics) Samsung TA550

  Read the article

• How to install Radeon X600 driver

  - by mmrs151

  I am completely new to Ubuntu and now running into so many problems regarding my display. I will be so grateful to the community to help me out and keep me loving Ubuntu. When I run lspci | grep VGA I get the following output 01:00.0 VGA compatible controller: ATI Technologies Inc RV380 [Radeon X600 (PCIE)] I am not sure if it means the driver is installed. Now the problem is I can not change the resolution like I can do in windows. I wanted to use dual monitor but it can not detect dual monitor. The monitor option in the preference shows 'Unknown' I tried to use a VGA switch for my ps3 and computer, but the computer is stuck with 1024x768 resolution. I have been trying for last three days, couldn't figure out anything. Now asking for you wisdom to get my display work. Regards, MMRAHMAN

  Read the article

• Triple monitors on hybrid video system GeForce+Intel

  - by v_mil

  I use Lenovo Ideapad Z580A with hybrid video: GeForce+Intel with Ubuntu 12.10 x64 Ukrainian. It has internal display and two outputs: HDMI and VGA. When I connect third display to VGA all displays go black. Pressing alt+backspace and login causes output to two displays: internal and VGA. System Settings - Displays (or monitors - I have Ukrainian interface) shows three displays: two are on, one (DVI) is off. Turning DVI on and pressing apply causes an error: Can not set configuration of controller CRTC 65. BIOS setting is Optimus (two video cards). Driver for GeForce is Nouveau. With best regards. Viktor.

  Read the article

• Cannot establish maximum resolution on ASUS PB278Q

  - by dentuzhik

  I've recently bought brand new ASUS PB278Q monitor. When trying to connect to my laptop, everything works great, except that I can't get the native resolution of my monitor (2560x1440) working. The automatic is 1920x1080. My graphic card is Nvidia GeForce 320m. Here's output from lspci for it: ~$ lspci | grep VGA 02:00.0 VGA compatible controller: NVIDIA Corporation GT216M [GeForce GT 320M] (rev a2) and also xrandr: ~$ xrandr Screen 0: minimum 8 x 8, current 3286 x 1437, maximum 8192 x 8192 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS-0 connected primary 1366x768+0+669 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ HDMI-0 connected 1920x1080+1366+0 (normal left inverted right x axis y axis) 600mm x 340mm 1920x1080 60.0*+ 59.9 50.0 30.0 25.0 24.0 60.0 50.0 1680x1050 60.0 1440x900 59.9 1280x1024 75.0 60.0 1280x960 60.0 1280x800 59.8 1280x720 60.0 59.9 50.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 720x576 50.0 720x480 59.9 640x480 75.0 59.9 59.9 480x576 50.0 480x480 59.9 I have proprietary drivers installed on my machine, here's the info about the monitor from nvidia-settings (Actually I don't have enough reputation to post images, so here's the text): Chip Location: Internal Signal: TDMS Connection link: Single Native resolution: 2560x1440 Refresh rate: 60.00 Hz The monitor is connected to laptop via HDMI cable, and honestly I have no idea what version it is, and what version is my HDMI output of my graphics card. I tried to find how I can figure it out on the web, but had no luck. Also my video card has only VGA and HDMI outs so I can't test neither DVI-D cable nor DisplayPort. So apparently, there's some problem over there. At least I want to know exactly what's going on. I've tried to see if it a linux-specific problem, but windows also gave me the same resolution by default. What I've already tried: Connect through VGA (stupid one, of course it gave me 1920x1080). Checked two HDMI cables (not sure if they're the same or not, as mentioned above). Played around with xrandr and adding custom modes. Didn't help. Surfed for the info a lot on the web, but couldn't get appropriate results. Actually xrandr gives me the following: ~$ cvt 2560 1440 60 # 2560x1440 59.96 Hz (CVT 3.69M9) hsync: 89.52 kHz; pclk: 312.25 MHz Modeline "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync ~$ xrandr --newmode "2560x1440_60.00" 312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync ~$ xrandr Screen 0: minimum 8 x 8, current 3286 x 1437, maximum 8192 x 8192 VGA-0 disconnected (normal left inverted right x axis y axis) LVDS-0 connected 1366x768+0+669 (normal left inverted right x axis y axis) 344mm x 193mm 1366x768 60.0*+ HDMI-0 connected primary 1920x1080+1366+0 (normal left inverted right x axis y axis) 600mm x 340mm 1920x1080 60.0*+ 59.9 50.0 30.0 25.0 24.0 60.0 50.0 1680x1050 60.0 1440x900 59.9 1280x1024 75.0 60.0 1280x960 60.0 1280x800 59.8 1280x720 60.0 59.9 50.0 1152x864 75.0 1024x768 75.0 70.1 60.0 800x600 75.0 72.2 60.3 56.2 720x576 50.0 720x480 59.9 640x480 75.0 59.9 59.9 480x576 50.0 480x480 59.9 2560x1440_60.00 (0x34f) 312.2MHz h: width 2560 start 2752 end 3024 total 3488 skew 0 clock 89.5KHz v: height 1440 start 1443 end 1448 total 1493 clock 60.0Hz ~$ xrandr --addmode HDMI-0 2560x1440_60.00 X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 140 (RANDR) Minor opcode of failed request: 18 (RRAddOutputMode) Serial number of failed request: 29 Current serial number in output stream: 30 What I intend to do next: Try another HDMI cable? Try HDMI to DVI-D cable? Try HDMI to DisplayPort cable? Another type of adapters? VGA to DVI-D? Buy another laptop with another graphic card. Damn. My ideas pretty much end here. Any ideas? Any explanations why it isn't working are appreciated.

  Read the article

• Usb/vga not recognized anymore

  - by Peter Raeves

  I don't know what happened, but yesterday everything worked fine, but when I woke up this morning and booted my computer to Ubuntu 14.04 a bunch of hardware isn't recognized anymore. I use a dual monitor setup with dvi-d and vga, but the vga screen isn't recognized anymore and the dvi-d monitor is recognized as "Built-in Display" while I'm not on a laptop. Also every device connected through usb isn't recognized anymore either. I have a keyboard with the blue round connector, which still works, so I can still log in though. The computer goes slower than usual and I have no idea what has happened. Can anybody point me in the direction I should start looking, because this is scary! I just checked and both the front and back sound connectors stopped working also :/ Edit: The devices connected through USB are recognized as they all show up using sudo lsusb, Ubuntu just doesn't let me use them anymore.

  Read the article

• How to enable dual monitors with two ATI Radeon 4350 HD graphics cards?

  - by Christophski

  I have bought two ATI Radeon 4350 HD graphics cards and they both work well seperately. But only the first one will output most of the time. If I go to System - Appearance - Monitors it will only detect the monitor on the first graphics card. I have check using hardinfo and the system has definitely detecting both of the graphics cards so I don't know why it isn't detecting the monitor. I am running Maverick 64 bit

  Read the article

• Ubuntu 12.04 dual monitor reset bug

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) Few minutes after I login to my dual monitor setup its get reset to mirror screens. If I restore the settings via displays application everything is fine. On each reset the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like it's interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Four monitor setup with two Nvidia graphics cards

  - by user94329

  I'm running Ubuntu 12.04 and I have two nVidia quadro 2000 video cards, each with two monitors plugged in (all 4 monitors are identical). Now I have the latest nVidia drivers, and I'm trying to use the nVidia control panel to use all four monitors, and I can't get it to work. Currently, my configuration is using TwinView to have 2 monitors per X screen. This doesn't work well because either i turn xinerama on, and nothing appears on the screen when I start a X session with Compiz enabled. Things only work in Ubuntu 2D. i turn xinerama off, and compiz works, but now, I cant drag windows between the two screens and i have no idea how to start applications in the other screen. Is there a better way to configure my four monitor setup? Is there a way to get both GPUs onto a single X screen?

  Read the article

• Problem with dual monitor

  - by Gernot

  I have a laptop with a nvidia optimus graka. I'm also useing a 23" external monitor. It never really worked... . After installation (it was a clean installation) the 23" monitor worked as it should, but the LCD from the laptop wasn't at the right resolution. And every time i tried to change this the PC crashed. Today i had a litle bit of time so i decided to solve this problem. I've tried a few things ( e.g. I've installed bumblebee with the nvidia driver and tested it. It's working...) but nothing solved my problem. Instead of getting any closer to the solution, it's gotten even more strange now... . Now, the display setting isn't recognizing a 2nd monitor at all. But I get on the 23" monitor (which is not shown in the display setting) a screen with the same resolution as the one on the laptop. The display settings looks so: Any help would be wonderful.

  Read the article

• external monitor can't display max resolution

  - by mp94

  I had been using an external monitor, an old Dell Inc. 19" with Ubuntu 14.04 for a while now, The resolution it displayed at was something like 1366x768 or 1366x1024, I can't remember exactly which one it was. However, one day when I restarted my computer, I can no longer get that resolution on the external display, and can now display a max resolution of 1024x768. Does anyone know why this might happen all of a sudden? I think it was after running a system update.

  Read the article

• configuring separate X screens instead of TwinView

  - by fimre

  My Sony Vaio laptop is connected to an external Samsung monitor and my nVidia driver is configured in TwinView mode. Everything is OK with this, however, I can not adjust my displays individually so at the moment my external display is a little bit darker which disturbs me a lot. I tried the Separate X Screen mode but after restart, my laptop display was white with a black x sign mouse pointer and the external display normal desktop. Is it a bug or something I missed? The idea is that using Separate X Screen mode, I could adjust my displays individually. I would really appreciate someone would guide me out of this situation. Thanx in adv..

  Read the article

• Dual displays not working - NVidia - Ubuntu 12.4

  - by user75105

  Graphics Card: NVidia 460 GTX. Driver: NVIDIA accelerated graphics driver (version current) I have one DVI monitor, an old Dell LCD from 2005, and one VGA monitor, an Asus ML238H from 2010 whose HDMI port broke. The Asus is plugged into my graphics card's primary monitor slot and is the better monitor even though it is VGA but my computer defaults to the Dell. This happens when I boot as well; the loading screens, the motherboard brand image, etc. are all displayed on the Dell monitor until Windows loads. Then both monitors work. The same thing happened when I booted up Ubuntu 12.4 but I did not see the second monitor when the log-in screen popped up, nor did I when I logged in. I went to System Settings/Displays and my Asus monitor is not an option. I clicked Detect Displays and the Asus is not detected. I looked at the other questions regarding NVIDIA drivers and recalled my problems with Ubuntu a few years ago and decided to check the driver. I went to Additional Drivers to install the proprietary driver and it looks like it's installed and active but I'm still having this problem. There is another driver option, the post-release NVIDIA driver, but that does not fix the problem either. Also, under System Details/Graphics the graphics device is listed as Unknown, which might indicate that it is using an open source generic driver and not the proprietary NVidia driver. But under Additional Drivers it says that I am using the NVidia driver. Any help is appreciated.

  Read the article

• EVGA GTX650Ti Boost / Ubuntu 12.04 / 2 X-Star WQHD

  - by user210045

  I bought 2 X-Star WQHD monitors which, predictably, did not work with my on board video card. Yesterday I installed the EVGA card and have been trying to get the NVIDIA drivers to work. I tried to install the 304 .run, I tried to remove that and then install the nvidia-current, then I tried to activate the proprietary driver from within Ubuntu...for the first couple of attempts, I was able to see 800x600 or something close on the X-Star displays but now all I see is flashing colors on those. On my older Samsung monitor (S22B300B 21.5") is still displaying through the EVGA card. Any thoughts on how to go about fixing this?

  Read the article

• Getting trayer to work with dual screen setup

  - by Ikke

  I'm using XMonad as my window manager, and want to use trayer as a icon panel for things like nm-applet. The problem was that the panel wouldn't appear on the top of the screen. If I set it to the bottom it just appeared. After a lot of trying, I found out it is because my xorg.conf is setup for dualscreens, and probably the trayer panel is spawned outside my view (I currently have only a single screen, but I switch a lot). After manualy tweaking the xorg.conf file to allow for just one screen, the panel appears on the right spot. These are the things I had to modify: Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1366x768" Option "TargetRefresh" "60" Option "Position" "0 0" # Was 1280 256 Option "Rotate" "normal" Option "Disable" "false" EndSection SubSection "Display" Viewport 0 0 Virtual 1366 768 # Was 2646 2646 Depth 24 EndSubSection The problem is ofcourse that I can't use my dual screen setup anymore. Is there a way to force trayer on the right position even with the dualscreen setup?

  Read the article

• Sys.WebForms.PageRequestManagerServerErrorException: An entity object cannot be referenced by multiple instances of IEntityChangeTracker [closed]

  - by Mingebag

  `Story: I have a strange error when I try to save something I got this error message An entity object cannot be referenced by multiple instances of IEntityChangeTracker. I really don’t know what that is and why is it appear, it appears only when I try to save something my insert and update is working, only when I try to save something in db from my Telerik grid if (this.annualVacationList != null) { List<AnnualVacation> vacationToSave = this.annualVacationList; IEnumerable<AnnualVacation> existing = paramUser.AnnualVacations; foreach (AnnualVacation toSave in vacationToSave) { AnnualVacation existingItem = existing.Where(x => x.AnnualVacationId == toSave.AnnualVacationId).SingleOrDefault(); if (existingItem == null) { ctx.AddToAnnualVacations(toSave); } else { existingItem.FromDate = toSave.FromDate; existingItem.ToDate = toSave.ToDate; existingItem.WorkingTime = toSave.WorkingTime; existingItem.VacationDays = toSave.VacationDays; } } } ctx.SaveChanges(); } After debugging I have seen that the code brake down in the Project.Name.Designer.cs ..... O.o public void AddToAnnualVacations(AnnualVacation annualVacation) { base.AddObject("AnnualVacations", annualVacation); }

  Read the article

• Best Graphics card (Setup) for three, high-res monitors attached to desktop

  - by nomrasco

  I have been looking around a little bit, but most of the discussions are about problems with already existing systems (particular graphics card and setup etc.). I would like to ask what would be the best option for me if I want to build powerful desktop with triple monitor setup. I have one Dell UltraSharp U2713HM (27 inches, 2560x1440) and I was thinking about getting two more. Would it be possible to have those three working with ubuntu (kubuntu) on any graphics card out there today? What is the best option if it comes to choosing particular model? Should I use proprietary drivers or some open sourced ones? I am not a gamer. I mostly develop on my machines and running some computational tasks, but I would rather like to spend some more money and have setup where I don't see any lags :) thank You very much in advance! Darek

  Read the article

• Dual Monitor in Ubuntu 11.10 is resetting the theme

  - by Mengu

  i'm experiencing a strange problem with dual monitors. when i set the dual monitor via "nvidia settings" and save the setting to xorg.conf, the default unity theme and icons are turning back to gtk default. i also get an error telling me "could not apply the stored configuration for monitors" here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@yellow) Fri Aug 5 12:31:28 UTC 2011 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Chi Mei Optoelectronics corp." HorizSync 30.0 - 75.0 VertRefresh 60.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 540M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP: nvidia-auto-select +0+0, CRT: 1680x1050 +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection here is an example of what i'm talking about: http://i.stack.imgur.com/vrlW1.png how can i fix this? thanks in advance.

  Read the article

• Dual Monitor Lock Screen Problem

  - by Justin Carver

  Ubuntu 12.04 Nvidia GTX 550-Ti x-swat Nvidia driver Problem: Using 2 monitors. When screen locks there is a blue box on top of the wallpaper and password dialog box that hides the field for entering your password or switching users. Problem is on 2 systems with similar hardware (Nvidia card, x-swat driver, dual monitors) You can still type your password in blindly and hit enter to login but it's irritating to not be able to see the dialog box.

  Read the article

• Do I need the ATI driver or open source for dual monitor setup (ATI HD 4350 - 1GB PCI-e) in Pear Linux 12.04?

  - by Geeve

  I think I covered my question in the title. Right now both monitors are mirrored (both 19" at 1440x900). I guess what I need to know is do I need the ATI proprietary driver or will the open source driver from Ubuntu (additional drivers) work? I want to expand the desktop between the two monitors. Still finishing install and running updates now, I just wanted to gather all documentation and downloads prior to doing what is necessary. Any help will be greatly appreciated.

  Read the article

• HP Envy - HDMI / Mini-display-port not working

  - by Castanho

  I saw that many of HP envy users (and some other hardwares) are having problems while using Ubuntu (some other distributions too). PROBLEM My main issue is make my HDMI or Mini-display-port work on Linux (Ubuntu). I`m able to make it work smoothly on windows only :( TIP Some guy create a blog, that is very nice and I could found some helps over there. But is kind of abandoned. General Purpose The idea of this post is to put together all users and share though under this issue. Thanks in advance for any reply/comment. UPDATE1: Looking THIS comment I could start to see something at the end of the road! I will wait for some reply on this. If I have more news I`ll update this post!

  Read the article

• Two different domain for specific languages pointing to one site

  - by user25599

  I developing a client's blog and he needs it to be bilingual (english and spanish). Now what he wants is that users can get to the content based on the domain e.g. Jhon enters www.domain.com and he gets the english version and Juan enters www.elsenordominio.com to get the spanish version. All content will be validated by php so the users and search engines only reads the domain related language. What do i need to use header re-direct or 301? is it bad for seo? will google will google penalize me? I hope you guys can help me and forgive me if my english is not good.

  Read the article

• W520 External monitor setup with Ubuntu 12.10

  - by user108372

  I just installed a fresh Ubuntu 12.10 64-Bit Desktop on my Lenovo W520. It looks like there are a lot of challenges around making it work with out of the box Nouveau drivers or propriety Nvidia drivers or Intel GPU. I looked at couple of notes on how to make it work with Bumblebee with Optimus Nvidia. None of them seems to work for 12.10. Anybody has a solid answer on this? It seems like a lot of people are suffering from this. Here is my xrandr output. Let me know if you need any additional information. Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192 LVDS1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 344mm x 193mm 1920x1080 60.0*+ 59.9 50.0 1680x1050 60.0 59.9 1600x1024 60.2 1400x1050 60.0 1280x1024 60.0 1440x900 59.9 1280x960 60.0 1360x768 59.8 60.0 1152x864 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) Thanks, Sef

  Read the article

• Problems with dual monitor & resolutions, only in 14.04

  - by theLadder

  I installed Ubuntu 14.04 but i am having weird problems with my dual monitors and the resolutions. I also tried Xubuntu 14.04 and was having the same problem. I have one 32 inch LG TV with 1920x1080 and one monitor with 1280x1024 resolution. When i first start my 32 inch gets 1360x768, if i then try to change to 1920x1080, everythings looks fine and the prompt asking me if i want to keep settings comes up and starts the countdown, but after 2 seconds my computer freezes, and after a few more seconds it reboots itself. However, if i disable my smaller monitor first, i can change to 1920x1080 on my 32 inch without problems, but if i then activate the second monitor the same problem happens again. in Xubuntu 14.04 i can change the refresh rate, if i run the 32 inch at 30hz or 50hz everytying works, but i would like to be able to run it at 60hz. I'm currently running Xubuntu 13.10 without this problem. My graphics card is a ATI Radeon HD 4850. What is causing this problem, grahpics drivers? Kernel? Xorg? And how do i solve it?

  Read the article

• Monitor dectecs wrong display mode

  - by user292449

  I am running into an issue with 14.04. I have two monitors. the fist one is a 19 inch LG that runs off DVI at 1440x900. It seems to function just fine. The second is a 23 inch LG that should run at 1920x1200. It has been plugged in with both a HDMI to HDMI cable and a DVI to HDMI cable. It seems to be stuck in "I am displaying for a DVD player in 1080p mode" or some such. I had this issue with windows a long long time ago and eventually it just went away. I can set the screen display to 1920x1200 with the generic X drivers but I am a gamer and would like to use the Nvidia drivers since they deliver better performance. When I switch to the Nvidia driver I can set the resolution to 1920x1200 but the screen seems to be up and to the left with a black border down and to the right. If I switch back to the default X driver after this the screen remains stuck in the up and to the left mode. Any help would be wonderful.

  Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >