Search Results

Search found 11938 results on 478 pages for 'secure boot'.

Page 53/478 | < Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >

  • Cannot dual boot Ubuntu 12.10 with windows 8.

    - by Noman
    I have tried automatic partition, i Have did the partition myself but Ubuntu installs alright. But when i restart the computer it goes back to windows 8 and i Have tried easybcd boot manager but it didn't work either. I displays ubuntu on the dual boot screen but after a while the screen shutdowns and say it didn't find the boot file or the boot file was missing? Do you guys know how to solve this problem? any suggestions?

    Read the article

  • Ubuntu 14.04 not booting before Windows 8.1

    - by user280244
    I try too boot my computer into Ubuntu, but I end up having to manually select Ubuntu from the devices menu, even though it was supposed to boot first. Instead Windows 8 boots up like Ubuntu isn't even there! And GRUB works just fine when Ubuntu is selected in the boot device menu. (How else am I on?) I tried using EasyBCD but kept getting errors from the windows boot manager. And just in case it helps, during installation of Ubuntu it didn't recognize windows 8, and I had to resize and install manually. Anything I can do? Notes: EVERYONE!!! GRUB WORKS PERFECTLY!!! IT IS AN ERROR IN THE HP BOOT MENU AS I HAVE PREVIOUSLY SAID!!! PLEASE DO NOT GIVE ME ANSWERS FOR GRUB EDITS IN THE FUTURE!!! Here are my specs: PC type: HP 2000-2d49WM Notebook PC RAM: 4GB Swap: 2GB Processor: AMD E-300 Vision 1.3 GHz x2 BIOS Edition: N\A Until further notice

    Read the article

  • Why do I get Detached Entity exception when upgrading Spring Boot 1.1.4 to 1.1.5

    - by mmeany
    On updating Spring Boot from 1.1.4 to 1.1.5 a simple web application started generating detached entity exceptions. Specifically, a post authentication inteceptor that bumped number of visits was causing the problem. A quick check of loaded dependencies showed that Spring Data has been updated from 1.6.1 to 1.6.2 and a further check of the change log shows a couple of issues relating to optimistic locking, version fields and JPA issues that have been fixed. Well I am using a version field and it starts out as Null following recommendation to not set in the specification. I have produced a very simple test scenario where I get detached entity exceptions if the version field starts as null or zero. If I create an entity with version 1 however then I do not get these exceptions. Is this expected behaviour or is there still something amiss? Below is the test scenario I have for this condition. In the scenario the service layer that has been annotated @Transactional. Each test case makes multiple calls to the service layer - the tests are working with detached entities as this is the scenario I am working with in the full blown application. The test case comprises four tests: Test 1 - versionNullCausesAnExceptionOnUpdate() In this test the version field in the detached object is Null. This is how I would usually create the object prior to passing to the service. This test fails with a Detached Entity exception. I would have expected this test to pass. If there is a flaw in the test then the rest of the scenario is probably moot. Test 2 - versionZeroCausesExceptionOnUpdate() In this test I have set the version to value Long(0L). This is an edge case test and included because I found reference to Zero values being used for version field in the Spring Data change log. This test fails with a Detached Entity exception. Of interest simply because the following two tests pass leaving this as an anomaly. Test 3 - versionOneDoesNotCausesExceptionOnUpdate() In this test the version field is set to value Long(1L). Not something I would usually do, but considering the notes in the Spring Data change log I decided to give it a go. This test passes. Would not usually set the version field, but this looks like a work-around until I figure out why the first test is failing. Test 4 - versionOneDoesNotCausesExceptionWithMultipleUpdates() Encouraged by the result of test 3 I pushed the scenario a step further and perform multiple updates on the entity that started life with a version of Long(1L). This test passes. Reinforcement that this may be a useable work-around. The entity: package com.mvmlabs.domain; import javax.persistence.Column; import javax.persistence.Entity; import javax.persistence.GeneratedValue; import javax.persistence.GenerationType; import javax.persistence.Id; import javax.persistence.Table; import javax.persistence.Version; @Entity @Table(name="user_details") public class User { @Id @GeneratedValue(strategy=GenerationType.AUTO) private Long id; @Version private Long version; @Column(nullable = false, unique = true) private String username; @Column(nullable = false) private Integer numberOfVisits; public Long getId() { return id; } public void setId(Long id) { this.id = id; } public Long getVersion() { return version; } public void setVersion(Long version) { this.version = version; } public Integer getNumberOfVisits() { return numberOfVisits == null ? 0 : numberOfVisits; } public void setNumberOfVisits(Integer numberOfVisits) { this.numberOfVisits = numberOfVisits; } public String getUsername() { return username; } public void setUsername(String username) { this.username = username; } } The repository: package com.mvmlabs.dao; import org.springframework.data.repository.CrudRepository; import com.mvmlabs.domain.User; public interface UserDao extends CrudRepository<User, Long>{ } The service interface: package com.mvmlabs.service; import com.mvmlabs.domain.User; public interface UserService { User save(User user); User loadUser(Long id); User registerVisit(User user); } The service implementation: package com.mvmlabs.service; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.stereotype.Service; import org.springframework.transaction.annotation.Propagation; import org.springframework.transaction.annotation.Transactional; import org.springframework.transaction.support.TransactionSynchronizationManager; import com.mvmlabs.dao.UserDao; import com.mvmlabs.domain.User; @Service @Transactional(propagation=Propagation.REQUIRED, readOnly=false) public class UserServiceJpaImpl implements UserService { @Autowired private UserDao userDao; @Transactional(readOnly=true) @Override public User loadUser(Long id) { return userDao.findOne(id); } @Override public User registerVisit(User user) { user.setNumberOfVisits(user.getNumberOfVisits() + 1); return userDao.save(user); } @Override public User save(User user) { return userDao.save(user); } } The application class: package com.mvmlabs; import org.springframework.boot.SpringApplication; import org.springframework.boot.autoconfigure.EnableAutoConfiguration; import org.springframework.context.annotation.ComponentScan; import org.springframework.context.annotation.Configuration; @Configuration @ComponentScan @EnableAutoConfiguration public class Application { public static void main(String[] args) { SpringApplication.run(Application.class, args); } } The POM: <?xml version="1.0" encoding="UTF-8"?> <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd"> <modelVersion>4.0.0</modelVersion> <groupId>com.mvmlabs</groupId> <artifactId>jpa-issue</artifactId> <version>0.0.1-SNAPSHOT</version> <packaging>jar</packaging> <name>spring-boot-jpa-issue</name> <description>JPA Issue between spring boot 1.1.4 and 1.1.5</description> <parent> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-parent</artifactId> <version>1.1.5.RELEASE</version> <relativePath /> <!-- lookup parent from repository --> </parent> <dependencies> <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-data-jpa</artifactId> </dependency> <dependency> <groupId>org.hsqldb</groupId> <artifactId>hsqldb</artifactId> <scope>runtime</scope> </dependency> <dependency> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-starter-test</artifactId> <scope>test</scope> </dependency> </dependencies> <properties> <project.build.sourceEncoding>UTF-8</project.build.sourceEncoding> <start-class>com.mvmlabs.Application</start-class> <java.version>1.7</java.version> </properties> <build> <plugins> <plugin> <groupId>org.springframework.boot</groupId> <artifactId>spring-boot-maven-plugin</artifactId> </plugin> </plugins> </build> </project> The application properties: spring.jpa.hibernate.ddl-auto: create spring.jpa.hibernate.naming_strategy: org.hibernate.cfg.ImprovedNamingStrategy spring.jpa.database: HSQL spring.jpa.show-sql: true spring.datasource.url=jdbc:hsqldb:file:./target/testdb spring.datasource.username=sa spring.datasource.password= spring.datasource.driverClassName=org.hsqldb.jdbcDriver The test case: package com.mvmlabs; import org.junit.Assert; import org.junit.Test; import org.junit.runner.RunWith; import org.springframework.beans.factory.annotation.Autowired; import org.springframework.boot.test.SpringApplicationConfiguration; import org.springframework.test.context.junit4.SpringJUnit4ClassRunner; import com.mvmlabs.domain.User; import com.mvmlabs.service.UserService; @RunWith(SpringJUnit4ClassRunner.class) @SpringApplicationConfiguration(classes = Application.class) public class ApplicationTests { @Autowired UserService userService; @Test public void versionNullCausesAnExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version Null"); user.setNumberOfVisits(0); user.setVersion(null); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(1L), user.getVersion()); } @Test public void versionZeroCausesExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version Zero"); user.setNumberOfVisits(0); user.setVersion(0L); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(1L), user.getVersion()); } @Test public void versionOneDoesNotCausesExceptionOnUpdate() throws Exception { User user = new User(); user.setUsername("Version One"); user.setNumberOfVisits(0); user.setVersion(1L); user = userService.save(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(1), user.getNumberOfVisits()); Assert.assertEquals(new Long(2L), user.getVersion()); } @Test public void versionOneDoesNotCausesExceptionWithMultipleUpdates() throws Exception { User user = new User(); user.setUsername("Version One Multiple"); user.setNumberOfVisits(0); user.setVersion(1L); user = userService.save(user); user = userService.registerVisit(user); user = userService.registerVisit(user); user = userService.registerVisit(user); Assert.assertEquals(new Integer(3), user.getNumberOfVisits()); Assert.assertEquals(new Long(4L), user.getVersion()); } } The first two tests fail with detached entity exception. The last two tests pass as expected. Now change Spring Boot version to 1.1.4 and rerun, all tests pass. Are my expectations wrong? Edit: This code saved to GitHub at https://github.com/mmeany/spring-boot-detached-entity-issue

    Read the article

  • How to use BCDEdit to dual boot Windows installations?

    - by Ian Boyd
    What are the bcdedit commands necessary to setup dual boot between different installations of Windows?5 Background i recently installed Windows 8 onto a separate hard drive1. Now that Windows 8 in installed i want to dual-boot back to Windows 7. i have my two2 hard drives: So you can see that i have my two disks, with the partitions containing Windows: Windows 7: \\PhysicalDisk0 (partition 03) Windows 8: \\PhysicalDisk2 (partition 1) What i'm trying to figure out how is how to use bcdedit to instruct the thing that boots Windows that there is another Windows installation out there. Running bcdedit now, it shows current configuration: C:\WINDOWS\system32>bcdedit Windows Boot Manager -------------------- identifier {bootmgr} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {globalsettings} integrityservices Enable default {current} resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} displayorder {current} toolsdisplayorder {memdiag} timeout 30 Windows Boot Loader ------------------- identifier {current} device partition=C: path \WINDOWS\system32\winload.exe description Windows 8 locale en-US inherit {bootloadersettings} recoverysequence {ce153eb9-3786-11e2-87c0-e740e123299f} integrityservices Enable recoveryenabled Yes allowedinmemorysettings 0x15000075 osdevice partition=C: systemroot \WINDOWS resumeobject {ce153eb7-3786-11e2-87c0-e740e123299f} nx OptIn bootmenupolicy Standard hypervisorlaunchtype Auto i cannot find any documentation on the difference between Windows Boot Manager and Windows Boot Loader. Documentation There is some documentation on Bcdedit: Technet: Command Line Reference - Bcdedit Technet: Windows Automated Installation Kit - BCDEdit Command Line Options Whitepaper - BCDEdit Commands for Boot Environment (Word Document) But they don't explain how edit the binary boot configuration data If i had to guess, i would think that a Windows Boot Manager instructs the BIOS what program it should run. That program would give the user a set of boot choices. That leaves Windows Boot Loader do be a particular boot choice, that represents a particular installation of Windows. If that is the case i would need to create a new Windows Boot Loader entry. This means i might want to use the /create parameter: /create Creates a new boot entry: bcdedit [/store filename] /create [id] /d description [/application apptype | /inherit [apptype] | /inherit DEVICE | /device] So i assume a syntax of: >bcdedit /create /d "The old Windows 7" /application osloader Where application can be one of the following types: Apptype Description BOOTSECTOR The boot sector application OSLOADER The Windows boot loader RESUME A resume application Unfortunately, the only documentation about osloader is "The Windows boot loader". i don't see how that can differentiate between Windows 8 on one hard drive, and Windows 7 on another. The other possible parameter when /create a boot loader is >bcdedit /create /D "Windows Vista" /device "The Quick Brown Fox" Unfortunately the documentation is missing for /device: /device Optional. If id is not set to a well-known identifier, the option that is used to specify the new boot entry as an additional device options entry. Since i did not set id to a well-known identifier, i must set /device to "the option that is used to specify the new boot entry as an additional device options entry". i know all those words; they're all English. But i have on idea what it is saying; those words in that order seem nonsensical. So i'm somewhat stymied. i don't want to be like Dan Stolts from Microsoft: I found no content that was particularly helpful when I hosed my machine by playing with BCDEdit. This post would have been ok if there was much more detail especially on the /set command OSDevice, etc. So once I got my machine fixed, I documented the solution and the information is here.... i mean, if a Microsoft guy can't even figure out how to use BCDEdit to edit his BCD, then what chance to i have? Bonus Reading BCDEdit Command-Line Options Bcdedit Server 2008 R2 or Windows 7 System Will NOT Boot After Making Changes To Boot Manager Using BCDEdit Visual BCD Editor4 Windows 7 and Windows 8 RTM Dual Boot Setup Footnotes 1 Since the Windows 8 installer would have damaged my Windows 7 install, i decided to unplug my "main" hard drive during the install. Which is a long-winded explanation of why the Windows 8 installer didn't detect the existing Windows 7 install. Normally the installer would have automatically created the required entries for dual-boot. Not that the reason i'm asking the question is important. 2 Really there's three drives, but the third is just bulk storage. The existence of a 3rd hard drive is irrelevant to the question. i only mention it in case someone wants to know why the screenshot has 3 hard drives when i only mention two. 3 i arbitrarily started numbering partitions at "zero"; not to imply that partitions are numbered starting at zero. i only mention partitions because i don't see how any boot-loader could do its job without knowing which partition, and which folder, an installation of Windows is located in. 4 i'm asking about BCDEdit. i tried Visual BCD Editor. It seems to be a visual BCD editor. That is to say that it's a GUI, but still uses the same terminology as BCDEdit, and requires the same knowledge that BCD doesn't document. 5 For simplicity sake we'll assume that all installation of Windows i want to dual-boot between are Windows Vista or later, making them all compatible with the BCDEdit and the binary boot loader. The alternative would require delving into the intricacies of the old ntloader. Nor am i asking about dual booting to Linux; or how to boot to a Virtual Hard Drive (vhd) image. Just modern versions of Windows on existing hard drives in the same machine. Note: You can ignore everything after the word Background. It's all pointless exposition to satisfy some people's need for "research effort" before they'll consider being helpful. Some people have even been known to summarily close questions unless there is research effort. Some people have been know to close questions if there is too much research effort. Some people close questions when i put the note saying that they can ignore everything after the Background out of spite. Some people are just grumpy.

    Read the article

  • What environment variables available while starting the script using init.d boot process

    - by raj_arni
    My problem is like this (OS is Sun Solaris): 1) At the boot time I want to start a process using a specific script. I am doing this by putting this script in /etc/init.d (and following other K and S rules) 2) The program which will be called by the script is located at $HOME/xxx/yyy location. 4) I am using 'su - {myuser} -c "{full path of the program}"' in order to execute the script as {myuser} 3) I dont want to hardcode the value of $HOME in the script but want to use the $HOME env variable only. How can I get this $HOME env variable in the shell script? Also what other variables will be available to me?

    Read the article

  • [C#] Boot problem

    - by Cecco
    Hi guys, I'm running on Windows 7 and I've a problem with my app at boot. Within my app I use some threads and external dll (sqlite3.dll, etc...). I've included these lines at first of my start.exe file: RegistryKey rkApp = Registry.CurrentUser.OpenSubKey("SOFTWARE\\Microsoft\\Windows\\CurrentVersion\\Run", true); String p = System.Environment.CommandLine.Replace("vshost.",""); String pp = p.Remove(p.Length-1); rkApp.SetValue("MyAPP", pp); If I start my app manually from exe file (or with VisualStudio) works correctly. If I start my app on reboot, MyApp crashes after few seconds. Why I've this problem?

    Read the article

  • Ubuntu 12.10 boots to purple or black screen but intermittently boots fine

    - by Nic
    I have a fresh install of Ubuntu 12.10 64bit dual booting with Win7 64bit. Windows boots fine every time. When I choose Ubuntu from Grub2 menu it will sometimes boot just fine. Most of the times though it gets stuck at a purple screen with nothing happening and no keys or key combinations working. Other times instead of the purple screen I get a black screen with a flashing cursor at the top. Nothing happens. I need to hold down the power button to restart and after a couple times of trying it will eventually boot into Ubuntu. Once that happens everything runs without any problems. I have tried different approaches to fix the problem but to no avail. I tried removing "quiet splash", used no splash, and nomodeset What I got from this was seeing all the text of the boot process but more often than not the process gets stuck right after recognizing all the USB ports and devices. If it gets stuck nothing happens (except when i plug in a usb device: it still recognizes it with a new line of text) In the case when the boot process works, after it lists the usb devices it tells me something like: recovery of read-only filesystem necessary. (its the filesystem that ubuntu runs on) then it does the recovery and i get: recovery complete. after that Ubuntu will boot properly and I get to see the login screen. I have no idea what to do to fix that problem. I have to reboot 3 to 5 times everytime I want to get into Ubuntu and I feel like I'm breaking my new Laptop. (its a lenovo ideapad z580 btw. i5 processor and nvidia gtx640 graphics card) I hope someone can help me. Thanks. Edit: i just got a "failed to enable AA error" message when waking it up from suspend. I don't know if that helps or has anything to do with the boot probs.

    Read the article

  • Dualboot (Win 8 / Ubuntu 13) is stuck at 'switching to clocksource'

    - by Daniel Puscht
    for days I have been crawling the web for solutions to my problem, but couln't find any. Here it is: I got a new Laptop (ASUS Vivobook S200E) with Win 8 OEM preinstalled. I wanted to create a dual-boot system with Ubuntu 13 next to it. I read about UEFI and that I have to turn of Secure Boot and use the existing EFI partition as bootloader for Ubuntu. So I did. I also ran boot-repair reinstalling the GRUB. The result is when I start the computer I get into the boot menu. So far, so good. When I pick Win everthing is fine. But when I choose Ubuntu (recovery) the system starts, but gets stuck at the line '[1.806366] Switching to clocksource tsc'. I already tried other versions of Ubuntu (12.04.2, 12.10). I played with boot-repair (using the recommended fix, setting everything manually). But nothing works. It's always the same issue. I read that it could be a problem concerning graphic drivers, but this I can hardly believe. If this is any help, boot-repair gave me this link to post in fora. http://paste.ubuntu.com/5810391/ Thanks for any help in advance

    Read the article

  • Installing Windows from Ubuntu while booting only from the hard drive

    - by WindowsEscapist
    My problem is unrelated to this workaround (the question) here, but the end result is that I cannot change boot order (or use a boot menu) on my laptop. It is currently running Ubuntu 12.04 with a dual-boot to Fedora if anything goes catastrophically wrong with Ubuntu (read "if I mess it up"). I would really like to install Windows 7 (but XP would be fine) on an empty FAT32 partition I have already made because of issues with WINE-emulated programs running more slowly than under Windows. The problem is, I can only boot from my hard drive. I can boot from other devices by removing the hard drive, but this is irrelevant because SATA is non-hotpluggable (I can't plug it back in to install). Is there any way I could boot up a Windows installer CD (or other CDs)? (I know how to keep my Linux distros.) I have both the .iso's and the physical CDs (or can obtain them). This may be unneeded, but just as a disclaimer this is completely legal. The computer belongs to me, I have admin privs, etc. I'm not doing anything shady!

    Read the article

  • How to make Linux reliably boot on multi-cpu machines?

    - by Adam Tabi
    I've got two machines, one with 4x12 AMD Opteron cores (AMD Opteron(tm) Processor 6176), one with 2x8 Xeon cores (HT disabled; Intel(R) Xeon(R) CPU E5-2660 0 @ 2.20GHz). On both machines I experience difficulties during boot of Linux using recent kernels. The system hangs during the initialization of the kernel, before or just when initramfs started initializing the hardware. The last thing which got displayed was a stacktrace like this: CPU: 31 PID: 0 Comm: swapper/31 Tainted: G D 3.11.6-hardened #11 Hardware name: Supermicro X9DRT-HF+/X9DRT-HF+, BIOS 3.00 07/08/2013 task: ffff880854695500 ti: ffff880854695a28 task.ti: ffff880854695a28 RIP: 0010:[<ffffffff8100a82e>] [<ffffffff8100a82e>] default_idle+0x6/0xe RSP: 0000:ffff8808546b3ec8 EFLAGS: 00000286 RAX: ffffffff8100a828 RBX: ffff880854695a28 RCX: 00000000ffffffff RDX: 0100000000000000 RSI: 0000000000000000 RDI: ffff88107fdec690 RBP: ffff8808546b3ec8 R08: 0000000000000000 R09: ffff880854695500 R10: ffff880854695500 R11: 0000000000000001 R12: ffff880854695a28 R13: ffff880854695a28 R14: ffff880854695a28 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88107fde0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000002b43256a960 CR3: 00000000016b5000 CR4: 00000000000607f0 Stack: ffff8808546b3ed8 ffffffff8100aec9 ffff8808546b3f10 ffffffff8109ce25 334ab55852ec7aef 000000000000001f ffffffff8102d6c0 0000000000000000 0000000000000000 ffff8808546b3f48 ffffffff810276e0 ffff8808546b3f28 Call Trace: [<ffffffff8100aec9>] arch_cpu_idle+0x20/0x2b [<ffffffff8109ce25>] cpu_startup_entry+0xed/0x138 [<ffffffff8102d6c0>] ? flat_init_apic_ldr+0x80/0x80 [<ffffffff810276e0>] start_secondary+0x2c9/0x2f8 I compiled the kernel myself and it works fine, if I boot with nolapic. Yet, only one core is used. Also, the kernel of RHEL6 seems to work fine. I suspect that there are some patches used to make things work. Using the kernel config file from RHEL6 and building a more recent kernel yields the same problems. On the Xeon machine, things got better by disabling Hyperthreading completely. The machine now boots successfully on at least 4 out of 5 times. And if it boots, multicore stuff works just fine. However, I'm wondering about what to do about the AMD machine. So to sum it up: Gentoo kernel 3.6 - 3.11 won't reliably boot those machines unless you reduce the amount of cores (e.g. via nolapic). RHEL6 kernel (which is 2.6.32) boots just fine. RH kernel config used to build a 3.x kernel won't yield a working kernel. Not distribution specific (apart from the kernel being used). These stack traces got printed every minute or so. The kernel seems to be stuck in an endless loop. Yet, a recent kernel is needed for various reasons. So the question is: What does the RHEL6 kernel do, what vanilla or gentoo kernels don't do? Is there a boot option that might lead to a reliable boot with all the cores enabled? Best, Adam

    Read the article

  • Is it possible to "stealth" dual boot a machine?

    - by BrianH
    I have a loaner laptop that has MS Windows with locked down permissions. It works okay for what I need to do, but I started wondering if there was a way to install a separate Windows OS on a separate hard drive to do what I want to do on it. Virtual I wish I could use VirtualBox or VMWare, but that is not an option (I even tried VBox portable). External Drive My next trial was see if it was possible to install Windows on an external drive, and then plug that drive in and boot from it whenever I wanted my own OS. After a few Google searches, I see that is not really a possibility. Swap Primary Drive Another option, would be to get a second internal hard drive, take the existing HD out, and install a new Windows OS on the secondary HD. This would mean swapping the internal hard drive each time I want to switch OSs - doable, but not very convenient. Dual Boot The laptop has an expansion slot where a second hard drive can be plugged in quickly. I thought about Dual booting, but I don't want to mess with the MBR on the primary hard drive. When I have to give the laptop back, I don't want a dual-boot screen to popup. Summary Is there a way to have 2 hard-drives on a machine, each with it's own OS, and maybe use BIOS settings to have only 1 hard drive active at a time? That way both hard drives could be physically connected, but only one would actually be active at a time. I basically want a second OS that does not (can not) affect the existing OS in any way, and can be removed at any time without affecting the existing OS. The secondary OS does not need any of the files on the main hard drive - it's basically like having 2 separate computers using the same hard ware... Is this possible, or would it be easier just to go out and buy a different laptop? Thanks in advance! EDIT I just discovered that my BIOS allows me to pick (at startup) which hard drive I want to boot from. I poked around in the BIOS and there is not a place to disable certain devices, like the primary hard drive. My only concern about plugging in a second hard drive and installing Windows to the second hard drive is that it will mess with the primary hard drive, or add a bootloader screen to pick which windows install to use. My thought would be to physically unplug the primary, plug in the secondary and install windows to the secondary. After the install is working properly, I can plug the primary back in and use the BIOS feature to determine which drive to boot to. Is there any way after I have 2 separate installs on 2 separate hard drives that one of the installs could mess with the MBR on the other drive?

    Read the article

  • How to encrypt dual boot windows 7 and xp (bitlocker, truecrypt combo?) on sdd (recommended?)

    - by therobyouknow
    I would like to setup a dual boot Windows 7 and Windows XP laptop/notebook computer where each operation system's partition is fully encrypted. I would like to do this on a SSD - a 128Gb Crucial M4. My research Dual boot of truecrypt encrypted OSs on one drive (not possible - in Truecript 7.x at time of writing) This cannot be done on a standard Truecrypt setup - it will only support encrypting one of the operating systems. I have tried this and also read about it here on superuser.com However, I did see a solution here that uses grub4dos as the initial bootloader to chain to separate truecrypt encrypted OSs, in my case Windows 7 and Windows XP: http://yyzyyz.blogspot.co.uk/2010/06/truecrypt-how-to-encrypt-multiple.html I am not going to consider this solution as it relies upon some custom code for use in the bootloader that is provided by the author. I would prefer a solution that can be fully understood so that I can be sure that there is nothing undesirable occuring (i.e. malware or just simply bugs in the code). I would like to believe such a solution doesn't have those risks but I can't be sure. BitLocker and Truecrypt combination - possible solution? So I am now considering a combination of encryption programs: I now aim to encrypt Windows XP with Truecrypt and Windows 7 with BitLocker. Assuming Truecrypt bootloader can boot into non-Truecrypt OSs (e.g. via hitting Escape to go to another menu), then this solution may be viable. SSDs and Encryption (use fastest possible spinning hard disk instead (?)) I read on various superuser.com posts and elsewhere that current SSDs are not suited to whole drive encryption for various reasons: impact of performance algorithms that give SSDs advantage over spinning harddisks. Algorithms used in compression of data for example. Wear on the SSD, shortening its life Security issues whereby data is repeated, as indicated in some Truecrypt documentation So I am now considering not using SSD. But with the aim to have the fastest drive possible, I am considering using the Western Digital Scorpion black 2.5" 7200rpm harddisk as this appears to be top rated among spinning platter-based harddrives (don't work for Western Digital). Summary So to achieve whole drive encrypted dual boot Windows 7 and Windows XP with minimal performance impact I intend to use a combination of Truecrypt and Bitlocker on a top-rated conventional spinning platter-based harddisk. Questions Will my summary: achieve whole disk encryption of the dual-boot Windows XP, Windows 7? OR an you suggest a simpler solution, including one that only requires only Truecrypt (BitLocker not available on XP). Or another encryption tool, including paid-for? provide the highest performance. Am I correct to avoid using SDD with encryption for the reasons I discovered? Are the concerns about SSDs and encryption still very real (some articles I read go back to 2010) Thanks for your input!

    Read the article

  • Is osTicket secure/private enough

    - by Andy
    I was going to use osTicket as my 'help desk' for my website, however I just got a little bit concerned when I realised that the clients' login details to see their support tickets are only their email address and a ticket ID. I am probably going over the top with security though, which is why I wanted to get some second opinions on how secure osTicket actually is and whether I should use it with my website. I run a software company, so chances are licence keys may be included in support tickets which are obviously sensitive information and valuable - so I want to ensure that the likelihood of a support ticket being hacked is very low. If there is any plugins/additions to make osTicket more 'secure', I would appreciate it if you could point me to them. Otherwise if there are any more free, more suited, help desk softwares out there please let me know. Thanks in advance

    Read the article

  • Installing Ubuntu 12.04 on NUC intel i3 DC3217IYE

    - by Kieron
    System: NUC i3, 2 hdmi ports, ethernet, no wireless. UEFI boot 2x2gb ram 30gb mSATA internal drive Ubuntu 64bit 12.04.03 Hello i am having much trouble loading an OS on my NUC. I started out attempting another OS with various loaders (beast/hack) without much success,(various panics on boot or endless reboot loops, or graphics failures) after many tries i decided to attempt Ubuntu. Many years ago i loaded Ubuntu on an e-machine without an issue so i figured it would go smoothly, nothing could be further from the truth. The Live USB stick loads, but when i am installing the OS it always fails to load grub 2. Obviously it wont boot from SSD without grub2. I searched and found that Boot-repair should fix it...so i created a live usb with boot repair...it refuses to repair the grub because the install never finished and the needed partions are not fully created and flagged. It also demands an internet connection which i am unable to provide. I then ran gparted in an attempt to create the needed partitions manually, then re-ran boot repair turning off the "check internet" option. and disabling the re-install grub hoping it would create the missing directories and or fix the flags. it appeared to run successfully but upon return to the Ubuntu live USB it still fails at the grub2 install. also gparted doesnt have the same choices that Ubuntu install has when creating partitions, causing it to not recognize that i already had a root, or an EFI directory or it sometimes couldnt tell what the format of the partition was...all very annoying the reason i cant connect to internet (and cant upload the error logs) is the nuc only has Ethernet and the location i have to set up is too far away from modem. i can not move the monitor closer to modem as it is a 50inch LCD. I just want to do a basic install with one user acct and remote desktop (vnc) turned on so i can move the NUC to the modem connect via ethernet and then finish setting it up via Remote desktop/VNC chicken from my mac. While i await any assistance you maybe able to provide i am going to attempt to switch to the 32bit version and legacy boot to see if that can load grub. thnx again to anyone that can come up with a possible solution. i would love to hit "erase and install ubuntu" if anyone can figure out what is stopping that simple answer from working. Also disks (CD/DVD) are not an option as neither my Mac mini or my NUC have optical drives, and i have no desire to buy one for one task

    Read the article

  • Secure Deployment of Oracle VM Server for SPARC - updated

    - by Stefan Hinker
    Quite a while ago, I published a paper with recommendations for a secure deployment of LDoms.  Many things happend in the mean time, and an update to that paper was due.  Besides some minor spelling corrections, many obsolete or changed links were updated.  However, the main reason for the update was the introduction of a second usage model for LDoms.  In a very short few words: With the success especially of the T4-4, many deployments make use of the hardware partitioning capabilities of that platform, assigning full PCIe root complexes to domains, mimicking dynamic system domains if you will.  This different way of using the hypervisor needed to be addressed in the paper.  You can find the updated version here: Secure Deployment of Oracle VM Server for SPARCSecond Edition I hope it'll be useful!

    Read the article

  • Xubuntu 14.04 will not boot after preseed installation

    - by Christian
    I recently set up Xubuntu 14.04 installation using preseed, and ran into a couple of problems during boot time. At first, right after the installation completed during first boot the system complained about /tmp not being mounted and did not proceed any further. I was able to fix that problem by making an entry for /tmp in /etc/fstab like so: tmpfs /tmp tmpfs optional,nodev,nosuid 0 0 This worked for a while (and still does for workstations that are already running), but newly installed machines are broken. They do not complain like before, but take forever to boot (2h) and it seems the root partition is mounted read only and you cannot do anything useful with the system. Any ideas on what to do? You can find the presseed file here Thanks in advance Update: If I get it to boot once via some magic in rescue mode (like simply mounting the root partition read-write, then resume boot) it will work forever. While this is a workaround, it is no option to do this for every installation.

    Read the article

  • Books or guides regarding secure key storage and database encryption

    - by Matty
    I have an idea for a SaaS product I want to create, however, this product will store extremely sensitive data that needs to be encrypted at rest. The trouble is not so much the encryption, but the problem of securely storing the keys so that in the event the server was somehow compromised, the keys couldn't just be recovered and used to decrypt the database. Are there any decent books to guides regarding database encryption, and in particular secure key storage? This seems to be a less than straightforward topic and something that is difficult to get right. I'm seeing multiple ways to attack such a system, but unable to come up with one that is secure enough to store highly confidential information.

    Read the article

  • What location to put bootloader, when running multiple drives and partition

    - by Matt G
    I have Win8 on my desktop, where a 120G SSD is used to run windows and some select applications, while I have a 2TB HDD to provide basic file storage and where possible, install applications instead of on the SSD. I want to install Ubuntu on a new partition of the HDD (I allocated 300GB, with 5GB swap file). I've used a USB to install the OS, which seemed to have done the job. However, after prompting for a restart, I can no longer boot to ubuntu. During instillation I was confused about where to install the "boot loader instillation". I ended up selecting "/dev/stb" because I figured I would be able to boot with BIOS by selecting the HDD drive as a priority over the SSD. The bootloader is a large part of where I think I went wrong. My partition system looked something like this: /dev/sta ... //SSD ~120 GB /dev/sta1 NTFS (350 MB) //Win8System /dev/sta2 NTFS (118 GB) //Win8C-Drive /dev/stb ... //HDD ~2TB /dev/stb1 NTFS (1563 GB) //FileStorage /dev/stb5 Free Space (300 GB) //Space I want to use for Linux (NOTE: Created two partitions from the 300GB, ~5GB and 295GB. stb5,stb6.) It'd be great if I could get an explanation of what drive you'd select for the boot loader and why, and what selections won't work with regards to the Boot Loader Instillation. I think I understand what Grub is, but I have no idea on how to use it, or play around with it. I seem to be able to get back into OS from my usb, however I believe it's just showing me a preview/trial of Ubuntu (ie, can't access any of the system NTFS drives). Note, if I try to install from the USB again, it will recognize that a version of Ubuntu 13.10 exists on the system. Apologies in advance, have used windows all my life, don't really know to much about Linux at all. Did have a brief skim over some similar questions, didn't find anything too useful. - Where to install bootloader when installing Ubuntu as secondary OS? - ubuntu 12.10 dual boot with windows 8 on two hdds - Dual-boot Windows 7 and Ubuntu on two SSDs with UEFI

    Read the article

  • Friday Spotlight: Oracle Secure Global Desktop and amitego VISULOX

    - by Chris Kawalek
    Happy Friday! Our spotlight this week is a screencast about a fantastic solution that takes the security model of Oracle Secure Global Desktop and adds even more features. If you work in environments where you need to have a video record of users' interactions with applications, or need to ensure that two users can remotely work on the same session (a worker entering data in a form from one workstation and a manager typing an authorization code from another, for example), amitego VISULOX can do this and a lot more. It's built on top of Oracle Secure Global Desktop, so you get all of the great features there, plus additional unique security related features provided by VISULOX. Click the thumbnail below to watch the screencast. We'll see you next week! -Chris 

    Read the article

  • Identify "non-secure" content IE warns about [on hold]

    - by Doug Harris
    As many know, if you serve a page over https and the content loads resources (images, stylesheets, js, SWF objects, etc) over http, older versions of Internet Explorer will show the user a warning saying "This page contains both secure and non-secure items". This is discomforting to many non-technical users. Usually, I can look at the HTML source and identify which item(s) are triggering this error. Sometimes a Flash object will load something else or some embedded javascript will put a new object in the DOM and trigger this. What tools are good for quickly tracking down the source of the warning?

    Read the article

  • Ubuntu not appearing in Boot Loader [new]

    - by Bryce
    I installed Ubuntu in a separate partition, along side Windows 8.1. However, Ubuntu/Grub does not appear in the Boot Loader. When I hold shift at startup, the regular Boot Loader (the one before I installed Ubuntu) appears with only Windows 8.1 as a boot option. I already tried the the Boot Repair from a Live USB, but nothing has changed. I have two partitions, one is a journaling file system (mounted on /) and the other is the swap. I read that it may be because Windows doesn't recognize the file system, but I don't know what to do about it. I don't know what I did wrong. Did I mount it in the wrong place? Any help would be appreciated. (If the problem is stupid, I apologize. I'm completely new to installing Ubuntu, and I could not find very detailed instructions.) Edit: In case this has any relevance, safe boot IS disabled.

    Read the article

  • not able to boot through pendrive and run set up

    - by Ash
    I have dell inspiron, previously i have install ubuntu 11.10 on my win7 and make it dual boot. but since i want to upgrade my ubuntu version and change the partion spacing, i have delete 11.10 partion directly and extend my hardrive space(windows + ubuntu) at that moment everything is fine. then i have put 12.04 version pendrive in usb boot from usb and install the 12.04 32 bit . it was installed but can't showing dual boot option like 11.10 and my machine directly boot into win7 . so instantly i again delete my 12.04 partion . Now i am able to login into win7 but whenever i put pendrive(12.04) into usb drive i am facing error of "grub rescue" even though i try to put lower version(11.04) it showing another error "Error: No default or UI configuration directive found boot " i have reinstall win7 and reformat all partion still i am facing same error :( i need help badly.

    Read the article

  • 12.04 indicates filesystem check on next boot, but never does one

    - by pcm
    Just installed 12.04 32 bit on my machine, with 3 drives. When I open a terminal window or ssh in remotely, I see: Welcome to Ubuntu 12.04.1 LTS (GNU/Linux 3.2.0-29-generic-pae i686)  * Documentation:  https://help.ubuntu.com/ *** /dev/sda1 will be checked for errors at next reboot *** *** /dev/sda2 will be checked for errors at next reboot *** *** /dev/sdg1 will be checked for errors at next reboot *** Last login: Fri Aug 31 08:15:41 2012 from .... However, if I reboot, I never see it doing a disk check on boot up, like I used to see with 10.10. Note, after install, I was not seeing the grub menu on boot. I made a ISO disk with BootRepair and now I get the normal grub menu. Any idea as to why the disk check is not happening on boot (I know I can boot a Live CD and then check the disk - I just want the check on boot working)?

    Read the article

  • What's New in Oracle Secure Global Desktop 5.1 webcast

    - by Chris Kawalek
    We have a really exciting webcast coming up for you this week that will tell you all about what's new in Oracle Secure Global Desktop 5.1. Hosted by Andy Hall, you will learn all the exciting features in this brand new release! What's New in Oracle Secure Global DesktopThursday, November 7, 9AM Pacific TimeRegister now. If you'd like a sneak peek, hop on over to the Fat Bloke Sings, where Fat Bloke goes into detail on some of the new features. My favorite is accessing your applications (or even full desktops) from SGD using just the Chrome web browser. In this graphic, Fat Bloke is running Oracle Linux via SGD and accessing with Chrome on the Mac. This required no installation on the client, no dependencies on any other software, nothing -- just open up Chrome, login, and all of your stuff is there. Very cool.  We hope to see you on Thursday! -Chris 

    Read the article

  • Upstart Script: Detect Shift Key Down At Boot

    - by bambuntu
    I want to create a boot up potential which allows a different upstart/runlevel configurations to load based upon specific key downs at boot (or combos). How do I detect a key down event with an upstart script? I'm offering a bounty. The deal is you must provide a very simple piece of working code to do this. I will immediately check the code and verify that it works. I'm on 10.04 if that helps. Alternative methods to achieve the same result are acceptable, i.e., if grub could somehow show entries that would indicate a type of boot, where that boot would cp appropriate files to /etc/init. So, instead of a keydown solution, it would be a boot menu item solution and the way to get grub to copy upstart scripts to /etc/init. If possible.

    Read the article

< Previous Page | 49 50 51 52 53 54 55 56 57 58 59 60  | Next Page >