Search Results

Search found 18003 results on 721 pages for 'nidhinzz own'.

Page 532/721 | < Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >

  • Western Digital HDD now freezes my BIOS when loading the video card!

    - by Vercas
    After I have successively and successfully installed 3 Windows XP's on the same partition (Don't ask why...), I restarted my computer again and the BIOS just froze when it loaded the video card. Together with my uncle, we tracked down the problem and found out it's the HDD's fault. We tried booting without the HDD and it worked! (No other HDD (I have only one) but with a Ubuntu Live CD in.) We tried the HDD with a different data bus (It was from an identical computer) but that one didn't let my BIOS recognize the HDD. We also put the HDD in another computer as the second HDD and it DID recognize it but Windows XP kept saying it cannot install a driver and that it installed successfully. Happily, I have managed to backup some of my most important files in that other computer. The following is a list of tests that we have run. With the HDD Original data bus Original computer Result: BIOS freezes WITHOUT the HDD Original data bus Original computer Result: Everything works just fine! With the HDD ANOTHER data bus Original computer Result: Cannot see the HDD With the HDD Original data bus ANOTHER computer Result: It worked! With the HDD ANOTHER data bus ANOTHER computer Result: It worked! During the tests, we had only two data buses and two computers. (each data bus from it's own computer) Strange thing is that the second data bus cannot let the BIOS see the HDD in my computer but works just fine with the other computer. I beg you to help me! I have my most important data on that HDD and I really cannot afford to buy another decent IDE HDD now!

    Read the article

  • VPN service into 192 network

    - by tophersmith116
    I'm thinking about setting up a security testing lab. I work on a switched network, and that just makes for unnecessary headaches when doing testing. I'd like to create a 192 network with a few machines inside for DBs and AppServers etc. I will need a pivot machine that connects to both the outer network and the 192 (for automation purposes). But I'd like to be able to connect into the 192 network with my own machine from the outer network as the "attacking" machine (rather than have dedicated attack machines inside the 192 network). Therefore, I'd like to have the pivot server be a VPN server as well, so that my machine can VPN into the 192 network from the outer network. First off, is this even possible? Can I have a single computer with two NICs where a VPN service allows remote connections into the 192? Secondly, I'd like to have multiple outer clients connect to the VPN. Does anyone have any suggestions? I've used Hamachi well before, but I've also seen some good stuff from OpenVPN.

    Read the article

  • Managed LAMP platform for maximizing availability and global reach, not scalability

    - by user66819
    Assume a Linux/Apache/MySQL/PHP application for a small base of registered users. With small userbase, there are no traffic peaks so the scalability that cloud platforms offer is not imperative. But the system is mission-critical, so availability is the primary goal. Users are also distributed across Asia, Europe, and US, so multiple server locations that minimize users' network hops would be highly desirable. The dream: a managed VPS platform where we would configure a single server (uploading PHP and other files, manipulating database, etc.), and the platform would automatically mirror the server in a handful of key places around the world (say one on each US coast, one in Europe, one in east Asia). File system synchronization and MySQL replication would happen automatically. Core operating system is managed, so we don't need to do full system administration and security, and low-level backups are also done by service provider, though we also do our own backups as well. Couple this with some sort of DNS geo-detection, so users are routed to the nearest operational server... with support for https, of course. Does such a dream exist? If not, what are some approaches to accomplish the same end with minimal time investment and minimal monthly hosting costs?

    Read the article

  • Why can't a PC with 2 network cards be accessed by hostname?

    - by lewis
    I set up PC with 2 network cards, connected to the same LAN. I can connect to this PC (e.g. by remote desktop) only via ip-addresses. Accessing by hostname does not work. Why is this the case? UPDATE: Full environment 1. PC with 2 hardware network adapters. 2. On this PC installed VMWare Workstation. Created 3 VM's, networked by "bridged" network setting in VMWare. 3. In LAN all ip-addresses given from DHCP. 4. Win2k8 on all hosts (both physical and vitrual). As result: 1. PC has 2 ip-address (e.g. 192.168.1.71 and 192.168.1.72). PC available in LAN by ip-addreses, but not avail by hostname. 2. VM's has own ip-addr on each (e.g. 192.168.1.73, *74, *75 etc). They are available from LAN by their ip's, BUT not by their hostnames. How can I access to PC and to VM's by hostname?

    Read the article

  • finding files that match a precise size: a multiple of 4096 bytes

    - by doub1ejack
    I have several drupal sites running on my local machine with WAMP installed (apache 2.2.17, php 5.3.4, and mysql 5.1.53). Whenever I try to visit the administrative page, the php process seems to die. From apache_error.log: [Fri Nov 09 10:43:26 2012] [notice] Parent: child process exited with status 255 -- Restarting. [Fri Nov 09 10:43:26 2012] [notice] Apache/2.2.17 (Win32) PHP/5.3.4 configured -- resuming normal operations [Fri Nov 09 10:43:26 2012] [notice] Server built: Oct 24 2010 13:33:15 [Fri Nov 09 10:43:26 2012] [notice] Parent: Created child process 9924 [Fri Nov 09 10:43:26 2012] [notice] Child 9924: Child process is running [Fri Nov 09 10:43:26 2012] [notice] Child 9924: Acquired the start mutex. [Fri Nov 09 10:43:26 2012] [notice] Child 9924: Starting 64 worker threads. [Fri Nov 09 10:43:26 2012] [notice] Child 9924: Starting thread to listen on port 80. Some research has led me to a php bug report on the '4096 byte bug'. I would like to see if I have any files whose filesize is a multiple of 4096 bytes, but I don't know how to do that. I have gitBash installed and can use most of the typical linux tools through that (find, grep, etc), but I'm not familiar enough with linux to figure it out on my own. Little help?

    Read the article

  • lenovo x1 carbon windows 8 frequent wifi disconnect issue

    - by hIpPy
    I'm having frequent wifi disconnects on my Lenovo X1 Carbon Touch laptop. I got this laptop 2 months back and it has been happening ever since about 3-5 times a day and 10 times a week on average. I've Frontier Fios internet. Power connected or not does not matter. Once I get disconnected, I try below to connect again in that order: turn Airplane mode on and off, troubleshoot network problems windows troubleshooter), restart the laptop I'd find that the WiFi adapter would get disabled and sometimes windows troubleshooting would help but more than often I'd end up restarting the laptop. A week back, I upgraded my wifi network adapter drivers (now Intel, version 15.5.6.48, 10/3/2012). I still get disconnected frequently but turning Airplane mode on and off gets me connected again. So the driver update did help. Windows 8 is updated. None of the other devices (nexus, iphone phones, nexus7, ipad tablets) would have wifi issues when my laptop would get disconnected. config: Intel(R) Centrino(R) Advanced-N 6205 (WiFi network adapter) Microsoft Windows 8 Pro Microsoft Windows [Version 6.2.9200] x64-based PC LENOVO System Model: 3443CTO X1 Carbon Touch I recently noticed this log message When I got disconnected in event viewer: Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x[XXXXXXXXXXXX]. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server. Any idea?

    Read the article

  • Certificates in SQL Server 2008

    - by Brandi
    I need to implement SSL for transmissions between my application and Sql Server 2008. I am using Windows 7, Sql Server 2008, Sql Server Management Studio, and my application is written in c#. I was trying to follow the MSDN page on creating certificates and this under 'Encrpyt for a specific client', but I got hopelessly confused. I need some baby steps to get further down the road to implementing encryption successfully. First, I don't understand MMC. I see a lot of certificates in there... are these certificates that I should be using for my own encryption or are these being used for things that already exist? Another thing, I assume all these certificates are files are located on my local computer, so why is there a folder called 'Personal'? Second, to avoid the above issue, I did a little experiment with a self-signed assembly. As shown in the MSDN link above, I used SQL executed in SSMS to create a self-signed certificate. Then I used the following connection string to connect: Data Source=myServer;Initial Catalog=myDatabase;User ID=myUser;Password=myPassword;Encrypt=True;TrustServerCertificate=True It connected, worked. Then I deleted the certificate I'd just created and it still worked. Obviously it was never doing anything, but why not? How would I tell if it's actually "working"? I think I may be missing an intermediate step of (somehow?) getting the file off of SSMS and onto the client? I don't know what I'm doing in the least bit, so any help, advice, comments, references you can give me are much appreciated. Thank you in advance. :)

    Read the article

  • MongoDB and GrifFS. What are the best storage options in the range of 1 TB?

    - by Nerian
    We are going to launch a service that will require between 1 and 2 GB for file storage per paid user. I am going to use GridFS for storing files. I am pondering the different options for storing the database. But since I am unexperienced at deployment and it is my first time with Mongodb I need your experience. Criteria: I want to spend my time developing my core business, that is, my own application. I am a Ruby on Rails developer. I do not like to mess with server configuration. Hence, I would like a fully managed hosting solution. But I would like to know about any other option, if you think it is worth it. It should be able to scale. Cloud style. Pay as you go. The lower the price, the better. So far I known of these services: https://mongohq.com/pricing https://mongomachine.com/pricing https://mongolab.com/about/pricing/ http://cloudcontrol.com/add-ons/mongodb/ And they seem to be OK for common needs, that is no file storage. But I am going to use GridFS, so the size matters. These services seems to scale, in price, quite poorly. MongoHQ: The larger plan max storage is 20 GB. Seems like a very little storage, for GridFS. MongoMachine: Flat price, 2.5$ per GB. I didn't found the limit. Seems like a good price, comparing the others. MongoLab: 3.984 GB max, which I don't think I will hit, so perfect. 8$ per GB, quite costly. CloudControl: The larger plan is 20 Gb. The custom service starts at 250€ plus some unspecified charge per GB. What is your experience with these services? Any downtimes? Other possibilities?

    Read the article

  • In Windows 7, why won't my display stay off despite the power settings saying it should?

    - by Jer
    I'm completely stumped by this. My simple use case is that when I'm in bed, I use a cordless mouse to browse the web, watch videos, etc. - the monitor is across the room. When I'm going to sleep, I want to shut the monitor off. I also want to be able to turn it back on in the morning. I just want to turn the monitor off and on using only the mouse. I thought of creating a power setting that turned the monitor off asap (the shortest amount of time is one minute; that's fine). I have one that does this. It worked great for almost a year on my old XP machine, and for about four months on my new Windows 7 laptop (which I essentially use as a desktop). All of a sudden a couple weeks ago, it just stopped working - my monitor won't turn off on its own anymore. Here are the settings: I tried other options. Based on the advice here I tried nircmd. This seemed great. I created a shortcut with the command line: "C:\Program Files\nircmd\nircmd.exe" cmdwait 1000 monitor off I click this, and in one second the monitor goes off. However about five seconds later it turns back on, and I've been extra careful to make sure the mouse isn't moving. I have no idea what's going on. Based on both of these things, my only guess is that something could be running in the background which somehow makes the computer think it's in use. I've tried killing as many programs as possible but I still get the same behavior. Any advice? I'm mainly curious about how to debug, but am open to other suggestions about turning the monitor off and on with just the mouse as well.

    Read the article

  • Restoring a fresh home folder in a shared user domain environment

    - by Cocoabean
    I am using a tool called pGINA that adds another credential provider to my Windows 7 clients so we can authenticate campus users via campus LDAP. We have the default Windows credential providers setup to authenticate off of our Active Directory, but we have students in our classes that don't have entries in our AD, and we need to know who they are to allow them internet access. Once these LDAP users login using pGINA, they are all redirected to the same AD account, a 'kiosk' account with GPOs in place to prevent anything malicious. My concern is that my users will accidentally save personal login information or files in that shared profile, and another user may login later and have access to a previous user's Gmail account, as the AppData folder on each computer is shared by anyone logging into the kiosk user. I've looked into MS's 'roll-your-own' SteadyState but it didn't seem to have what I wanted. I tried to write a PS script to copy a pre-saved clean version of the profile from a network share, but I just kept running into issues with CredSSP delegation and accessing the share from the UNC path. Others have recommended something like DeepFreeze but I'd like to do it without 3rd party tools if possible.

    Read the article

  • Diagnosing Random Network Lag

    - by uesp
    I'm having trouble diagnosing some random lag on a 6 server LAMP cluster serving a MediaWiki site. While we're serving some 100 pages/sec the servers themselves are running fine with less than 0.5 load, no locked processes, no paging, no errors being logged, etc.... Lag is present on all servers and is random: one minute its fine the next it's there. DNS lookups on the servers are randomly slow. For example time nslookup google.com varies randomly from a few milliseconds to several seconds and sometimes times out entirely. While we use IP addresses internally on the cluster this may be a symptom of the root issue. We are not running our own DNS server. The Apache server-status pages randomly lag or time out. Benchmarking using ab between servers shows a few loads sometimes take 3000 ms (almost exactly). Benchmarking server-status on the local server itself usually shows no issue (it showed a lag only once among a few hundred tests). The servers are sitting behind a switch and a firewall which I don't have any access to so I don't know their setup or status. While we are under heavier than normal load a 2 Mbps incoming and 20 Mbps outgoing traffic shouldn't be stressing the switch or firewall should it? My feeling is that it is the switch/firewall or something above them in the ISP like their DNS but can't confirm it. I need some other tests or methods of diagnosing this lag to try and narrow down the ultimate cause.

    Read the article

  • How to diagnose issue between mobo, RAID, and SSD cache drive? [migrated]

    - by goober
    Background This issue is happening on my custom-built desktop. Relevant specs: Motherboard: ASUS P8Z68-V PRO Utilizing Intel RST technology (application that uses unused SSD as cache) Processor: Intel core i7-2600k (not overclocked) HDDs: RAID1 of 2x Seagate Barracuda 1TB (ST31000524AS) (RAID performed via z68 chipset) Machine has run fine for ~1 year with no issues, and has been well-maintained (dust, etc.) What Happened Random Freezing issues -- intermittent Looked at the RST application screen to see that the acceleration cache was listed as "unavailable" -- recommended that I power down and reconnect the drive. Reconnected the drive to no avail. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Now, the freeze happens whenever loading something particularly data-driven (a video, a game, etc.) Steps Attempted Reconnected the drive to no avail. Updated Intel RST software to v. 11.6.0.1030 to see if that made a difference. Attempted to move the drive to another SATA port. Acceleration option disappeared from RST software. Connected the drive as its own volume. Formatted it, ran disk check errors -- all seems fine. Reconnected the drive and selected it again as the cache drive. Now, what happens when there is a freeze: Machine freezes I am unable to perform any command Screen then goes black I hit the reset button During boot, all drives show as "Disabled" and I am told no volume can be found I then hit the reset button (or power off/on) again. Either the next time (or sometimes after repeating this once more), the metadata cache is reconstructed and the system boots fine, showing the SSD as a cache. Question I believe this is an issue with the SSD itself, but how can I be sure since connecting it separately appeared to show no problems? I want to make sure it's not an issue with the motherboard, SATA ports, etc.

    Read the article

  • iPhone all day meeting request bug?

    - by RodH257
    We've come across a bit of a weird bug in the office. our office is closing for a week or so over christmas, and our admin staff sent a meeting request to everyone in the office to go from 5pm on the 23rd of December until we return to work at 8.30 on the 5th. However there was some confusion, as if you look at the image below, the same meeting request is showing up with different start times for some people. While most people get the 5pm date, for others it shows up as an all day event! Staff have been planning their activities for the 23rd only to find out that their calendar is wrong and they are required to work. With some investigation, we noticed that all of the people with the incorrect time own iPhones or iPads. So perhaps they accepted the meeting on their phones, and it has put the meeting in wrong? There are people with the correct one that have iPhones, but perhaps they are on ios4 still, or perhaps they didn't accept the meeting request on their phone. has anyone else come across this error at all? is there a fix?

    Read the article

  • NGINX: How do I calculate an optimal no. of worker processes and worker connections?

    - by bodacious
    Our web app is running on a Linode 2048 server at the moment (~ 2048 GB of RAM) The MYSQL database is on another linode of it's own so this server is really only handling NGINX and and the Rails application. The application itself uses about 185976 of memory per instance (RSS). Our traffic is < 1000 per day and the pages are mostly cached so there are fewer hits to the rails app itself. My question is - how can I calculate optimal NGINX config settings for my app? Below is the current config: worker_processes 1; # pid of nginx master process pid /var/run/nginx.pid; events { worker_connections 1024; } http { access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; passenger_root /home/user/.rvm/gems/ree-1.8.7-2011.01@URTV/gems/passenger-3.0.3; passenger_ruby /home/user/.rvm/rubies/ree-1.8.7-2011.01/bin/ruby; include mime.types; default_type application/octet-stream; sendfile on; tcp_nopush on; tcp_nodelay on; # gzip settings gzip on; gzip_http_version 1.0; gzip_comp_level 2; gzip_vary on; gzip_proxied any; gzip_types text/css application/x-javascript text/xml application/xml application/xml+rss text/javascript; # load extra modules from the vhosts directory include /opt/nginx/vhosts/*.conf; } Any advice would be appreciated! :)

    Read the article

  • What to do with old laptop screens?

    - by Lord Torgamus
    This question is inspired by another SU question I came across earlier today: What to do with old hard drives? It made me think about two long-dead laptops I have with perfectly good screens still inside. One is a Dell Inspiron 5100 and the other is an Averatec E1200, but responses need not be geared towards those particular models' screens. Rules, based heavily on the original question's: Objectives and suggestions to keep in mind when you post an answer : Should showcase your geekiness, be plain ol' fun, serve a social purpose or benefit the community. Your answer need not be limited to only one screen. For a really good answer, I'll go out and buy additional leftover screens. Your answer need not be limited to one project per screen. If additional accessories need be purchased, make sure they are common. Don't tell me to get a moon rock or something. The projects you suggested should serve a useful purpose; art is nice, but functional art is way better. Thanks in advance, folks. EDIT: Found another related question. Fun projects to do with an old 17" LCD monitor EDIT 2: I, for one, am enjoying the new outpouring of creativity here. Best fifty bucks... I mean, rep points... I ever spent. EDIT 3: That does it. At the end of the week, there was a tie for most votes between the accepted answer and the game platform answer. The game platform answer was cooler, but less reasonable as a project to actually do; in other words, it was more moon rocky. Unfortunately, I think fencepost had the best comment on the topic, which is that displays on their own have no good interface. Thanks for playing, everyone!

    Read the article

  • Shortcut To Full Screen App In Lion

    - by omghai2u
    I postponed getting OSX Lion for as long as I possibly could. Now that I have it, I'm having lots of difficulties getting it to perform how I want. On Snow Leopard my typical setup for working was 4 spaces. I'd keep a Windows VM open on Space #4 full-screened, a Linux open on space #3, and I'd do other stuff on spaces #1 and #2. My keyboard shortcut allowed me to switch between my Windows work (Command + 4) to my Linux work (Command + 3) very quickly, and without the need for my hands to leave the keyboard (or effectively to even quit typing). Productivity was good. I see that on Lion a full-screened VM (and yes, they need to be full screened, Fusion's Unity won't cut it for what I need to do) is its own separate Desktop. I have set up 4 desktops and made my keyboard shortcuts to move between them Command + # just as before. But how do I get my full-screened VM to be one of those already existing desktops? Or, rather, how do I make a short-cut for the full-screened app?

    Read the article

  • How do i install apache on my ubuntu 12.04 where it has virtualhost

    - by YumYumYum
    According to the docs https://help.ubuntu.com/10.04/serverguide/httpd.html i have done following, and that is almost how i do always in my Fedora, but Ubuntu looks like its not working. a) DNS to IP $ echo "127.0.0.1 a" > /etc/hosts $ echo "127.0.0.1 b" > /etc/hosts b) Apache virtualhost $ ls 1 2 default default.backup default-ssl $ cat 1 <VirtualHost *:80> ServerName a ServerAlias a DocumentRoot /var/www/html/a/public <Directory /var/www/html/a/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> $ cat 2 <VirtualHost *:80> ServerName b ServerAlias b DocumentRoot /var/www/html/b/public <Directory /var/www/html/b/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> c) load into Apache and restart the service $ a2ensite 1 $ a2ensite 2 $ a2dissite default $ /etc/init.d/apache2 restart d) Browse the new 2 hosts $ firefox http://a Does not work it goes always with http://a or http://b to /var/www/html How do i fix it so that it goes to its own directory e.g: http://a goes to /var/www/html/a/public not /var/www/html?

    Read the article

  • How to write rules for persistent net names?

    - by ndemou
    I know that a process generates persistent network card names based on rules found in /lib/udev/rules.d/75-persistent-net-generator.rules. I also know how to completely disable this process with a simple echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules but I've read that I "could also write my own rules file to give the interface a name — the persistent rules generator ignores the interface if a name has already been set" (/etc/udev/rules.d/README confirms that this is possible). Do you have any pointers to documentation about how to write such rules? (I mostly care about Debian/Ubuntu and a bit less for CentOS) As a specific example of why I want to write custom rules: I have two identical servers with one onboard LAN and one PCI LAN. In case of HW failure I want to be able to move disks from HW#1 to HW#2 and it's important for eth0 to continue pointing to the onboard card and eth1 to the PCI card (no one wants to mess with cabling in the middle of a HW failure panic). My current workaround works but is a lot of work[1] so I wonder if writing custom rules would allow me to express something simple like this: cards with MAC A or B should be named eth0 cards with MAC C or D should be named eth1 follow default naming scheme for anything else [1] install the OS in HW#1 and keep a copy of /etc/udev/rules.d/70-persistent-net.rules. Move the disks to HW#2 and keep a second copy of the same file. Concatenate the two copies and manually edit the NAME="ethX" part. Replace /etc/udev/rules.d/70-persistent-net.rules with my version. Finally disable auto-creation of a new 70-persistent-net.rules using echo '#' > /etc/udev/rules.d/75-persistent-net-generator.rules

    Read the article

  • How to calculate unweighted averages in Excel PivotTable?

    - by yonatron
    I often make PivotTables in which each row contains a number of per-person average measures. I then want to look at the unweighted column average for each measure, and usually make some kind of chart from these. Because my individual cells are often averaged from different numbers of data points, the Grand Total row ends up being a weighted average, which I’m not interested in. So I usually make my own average row a few rows above the table to use for my charts. That’s not too much work, but there’s another problem. I often add a few more people’s worth of data to the PivotTables’ source, then refresh the tables. This means my average row needs to be updated to encompass more rows from the PivotTable. Not a huge deal with one table, but when I have lots of them across lots of sheets, I have to do find/replace on a whole bunch of formulas. So: is there a way to automatically get unweighted column averages in a PivotTable, such that when the table is refreshed, the averages don’t change locations and encompass the newly added (or removed) data Thanks

    Read the article

  • Serve web application error messages from Http server

    - by licorna
    I have nginx as a http server with tomcat as a backend (using proxy_pass). It works great but I want to define my own error pages (404, 500, etc.) and that they are served by nginx and not tomcat. For example I have the following resource: https://domain.com/resource which doesn't exist. If I [GET] that URL then I get a Not Found message from Tomcat and not from nginx. What I want is that every time Tomcat responds with a 404 (or any other error message) nginx sends itself a message to the user: some html file accessible by nginx. The way I have my nginx server configured is very easy, just: location / { proxy_pass http://localhost:8080/<webapp-name>/; } And I've configured port 8080, which is tomcat, as not accessible from outside this machine. I don't think that using different location directives in nginx configuration will work, because there are some resources that depend on the URL: https://domain.com/customer/<non-existent-customer-name>/[GET] Will always return 404 (or any other error message), while: https://domain.com/customer/<existent-customer>/[GET] Will return anything different from 404 (the customer exists). Is there any way of serving Tomcat (Application Server) error messages with Nginx (http Server)? To check the message sent by the proxy_pass directive and act upon it?

    Read the article

  • WAN Optimization for Small Office/Home Office

    - by TiernanO
    I have been reading up on WAN optimization for the last while, mostly out of interest of speeding up my own internet connections, but also to speed up the office internet connection. At home, I have 2 cable modems plugged into a RouterBoard RB750, which load balances the connections. In the office, we have a single connection into a NetGear router. Most of the WAN Optimization products I have seen, seem to be prohibitively expensive, but also seem to be based on the idea of having multiple branches around the world. What I am looking for, ideally, is as follows: software install: I am "guessing" I need to install it in 2 places: one in the office or house, and one in "the cloud". any connections going to, say, The US (we are in Europe, but our backup's live in the US currently, which would be something important to speed up) would be "tunnelled" though the Optimizer. If downloading or uploading large files, open multiple connections between both "the cloud" and the optimizer... This is where a lot of speed could be gained. finally, for items not compressed, they would be compressed on the cloud side of things, also items that are already on the optimizer could be not sent again. kind of like RSync or Proxy servers... So, is there something that can be done? Is it available using off the shelf components (some magic script with SSH, Squid, Linux and duct tape) or is it something that needs to be purchased? or even an Open Source Project that does 90% of what i am asking?

    Read the article

  • Vmware player change dhcp server settings

    - by Tathagata
    I have a Windows Server 2003 running from a Vmware player on Win 7 box. The idea is to test Windows Deployment service in the virtual network. Is it possible to configure the vmware dhcp server with WDS related stuff(option 66, 67)? I found a few references where people were using the vnetlib.exe to start, stop the dhcp serverchange the subnet mask etc - but there's no info on how to get set the dhcp server options. DHCP config from the virtual network editor I do have the Workstation, without the license for it. In the Virtual network Editor, the DHCP settings for the network I'm using, only allows me to set the subnetmask, IP ranges and stuff like that. But not the dhcp options. DHCP server on the WDS server Authorizing the DHCP server in the guest WDS server fails. The VMware player can run its own dhcp server fro the virtual network with out any authorization from the Active directory - can I do the same, with Win dhcp server in the guest Win Server? ~~~~~ Can I authorize W2K8 DHCP server for private network, even when prohibited in enterprise network? says we have to run a third party dhcp server... :/.

    Read the article

  • Window 7 image in vmware will allow network connection out but not http

    - by Ormis
    I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I initially asked this on stackoverflow and now my eyes are now opened up to superuser. Thank you for any help you can provide.

    Read the article

  • Import data in Excel that doesn't have a row delimiter, but number of columns is known

    - by Alex B
    So i have this text file that looks something like this: Header1 Header2 Header3 Header4 A1 B1 C1 D1 A2 B2 C2 D2 and so on. When imported, I'd want the data to format itself in 4 columns. I tried the Get External Data from Text, and it successfully imports it, but it doesn't wrap it around, so it just keeps making columns for every space. I'd want it to go on the next line after 4 (in this case) elements have been added. What's the simplest way to achieve this? EDIT: My answer follows, since I'm not yet allowed to answer my own questions yet. The Excel function I needed is called indirect(). Not sure how it actually works though, so hopefully someone can help out with that, but the function call that worked for me is =INDIRECT(ADDRESS((ROW(A1)-1)*4+COLUMN(A1),1)) which i found over here: http://www.ozgrid.com/forum/showthread.php?t=101584&p=456031#post456031 Note: this required me to add the text to excel where i'd get this row full of columns, and then flip it so that i'd have a column full of rows.

    Read the article

  • Change to different user, or let different user execute a command

    - by WG-
    I have a problem. There is a server which I can access with an account by ssh, lets say WG. Now there is a folder with the following permissions. drwxr-s---+ 855 vvz www-data 20K Aug 21 17:56 pictures I want to copy this folder using rsync, however since I am not the user www-data but WG I cannot execute rsync. So I want www-data to execute a rsync command. However, I do not posses sudo powers. My friend however tells me that I am actually able to execute the rsync command as www-data, but he will not tell me how. I asked him for some clues and he told me that it had something to do with reverse shell (which I figured out to be that you connect by ssh to your server and then you connect back to your own server, or something). I also asked if it was by-design or actually a flaw in the system. He tells me it is both. Furthermore I think it has something to do with the group permissions. If I just make sure that I am with the group permissions then I can also read the files. Anybody has a clue?

    Read the article

< Previous Page | 528 529 530 531 532 533 534 535 536 537 538 539  | Next Page >