Search Results

Search found 21004 results on 841 pages for 'assembly load'.

Page 536/841 | < Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >

  • x86_64 printf segfault after brk call

    - by gmb11
    While i was trying do use brk (int 0x80 with 45 in %rax) to implement a simple memory manager program in assembly and print the blocks in order, i kept getting segfault. After a while i could only reproduce the error, but have no idea why is this happening: .section .data helloworld: .ascii "hello world" .section .text .globl _start _start: push %rbp mov %rsp, %rbp movq $45, %rax movq $0, %rbx #brk(0) should just return the current break of the programm int $0x80 #incq %rax #segfault #addq $1, %rax #segfault movq $0, %rax #works fine? #addq $1, %rax #segfault again? movq $helloworld, %rdi call printf movq $1, %rax #exit int $0x80 In the example here, if the commented lines are uncommented, i have a segfault, but some commands (like de movq $0, %rax) work just fine. In my other program, the first couple printf work, but the third crashes... Looking for other questions, i heard that printf sometimes allocates some memory, and that the brk shouldn't be used, because in this case it corrupts the heap or something... I'm very confused, does anyone know something about that? EDIT: I've just found out that for printf to work you need %rax=0.

    Read the article

  • Can protobuf-net serialize this combination of interface and generic collection?

    - by tsupe
    I am trying to serialize a ItemTransaction and protobuf-net (r282) is having a problem. ItemTransaction : IEnumerable<KeyValuePair<Type, IItemCollection>></code> and ItemCollection is like this: FooCollection : ItemCollection<Foo> ItemCollection<T> : BindingList<T>, IItemCollection IItemCollection : IList<Item> where T is a derived type of Item. ItemCollection also has a property of type IItemCollection. I am serializing like this: IItemCollection itemCol = someService.Blah(...); ... SerializeWithLengthPrefix<IItemCollection>(stream, itemCol, PrefixStyle.Base128); My eventual goal is to serialize ItemTransaction, but am snagged with IItemCollection. Item and it's derived types can be [de]serialized with no issues, see [1], but deserializing an IItemCollection fails (serializing works). ItemCollection has a ItemExpression property and when deserializing protobuf can't create an abstract class. This makes sense to me, but I'm not sure how to get through it. ItemExpression<T> : ItemExpression, IItemExpression ItemExpression : Expression ItemExpression is abstract as is Expression How do I get this to work properly? Also, I am concerned that ItemTransaction will fail since the IItemCollections are going to be differing and unknown at compile time (an ItemTransaction will have FooCollection, BarCollection, FlimCollection, FlamCollection, etc). What am I missing (Marc) ? [1] http://stackoverflow.com/questions/2276104/protobuf-net-deserializing-across-assembly-boundaries

    Read the article

  • Data Binding to an object in C#

    - by Allen
    Objective-c/cocoa offers a form of binding where a control's properties (ie text in a textbox) can be bound to the property of an object. I am trying to duplicate this functionality in C# w/ .Net 3.5. I have created the following very simple class in the file MyClass.cs: class MyClass { private string myName; public string MyName { get { return myName; } set { myName = value; } } public MyClass() { myName = "Allen"; } } I also created a simple form with 1 textbox and 1 button. I init'd one instance of Myclass inside the form code and built the project. Using the DataSource Wizard in Vs2008, i selected to create a data source based on object, and selected the MyClass assembly. This created a datasource entity. I changed the databinding of the textbox to this datasource; however, the expected result (that the textbox's contents would be "allen") was not achieved. Further, putting text into the textbox is not updating the name property of the object. I know i'm missing something fundamental here. At some point i should have to tie my instance of the MyClass class that i initialized inside the form code to the textbox, but that hasn't occurred. Everything i've looked at online seems to gloss over using DataBinding with an object (or i'm missing the mark entirely), so any help is great appreciated. ----Edit--- Utilizing what i learned by the answers, i looked at the code generated by Visual Studio, it had the following: this.myClassBindingSource.DataSource = typeof(BindingTest.MyClass); if i comment that out and substitute : this.myClassBindingSource.DataSource = new MyClass(); i get the expected behavior. Why is the default code generated by VS like it is? Assuming this is more correct than the method that works, how should i modify my code to work within the bounds of what VS generated?

    Read the article

  • System.ArgumentException: Invalid hex character at DecryptAssemblyResource

    - by Radu094
    My webapp is trowing these exceptions intermitently ever since we migrated to Mono + Apache: The error sounds more like a problem reading/processing some assembly, so I was wondering if I should be worried that there might be a problem with the hard-drive? System.ArgumentException: Invalid hex character at System.Web.Configuration.MachineKeySectionUtils.ToHexValue (Char c, Boolean high) [0x00000] in <filename unknown>:0 at System.Web.Configuration.MachineKeySectionUtils.GetBytes (System.String key, Int32 len) [0x00000] in <filename unknown>:0 at System.Web.Handlers.ScriptResourceHandler.GetBytes (System.String val) [0x00000] in <filename unknown>:0 at System.Web.Handlers.ScriptResourceHandler.DecryptAssemblyResource (System.String val, System.String& asmName, System.String& resName) [0x00000] in <filename unknown>:0 at System.Web.Handlers.ScriptResourceHandler.ProcessRequest (System.Web.HttpContext context) [0x00000] in <filename unknown>:0 at System.Web.Handlers.ScriptResourceHandler.System.Web.IHttpHandler.ProcessRequest (System.Web.HttpContext context) [0x00000] in <filename unknown>:0 at System.Web.HttpApplication+<Pipeline>c__Iterator2.MoveNext () [0x00000] in <filename unknown>:0 at System.Web.HttpApplication.Tick () [0x00000] in <filename unknown>:0 Method: Void Application_Error(System.Object, System.EventArgs) at File: at Line Number: 0 Method: Void ProcessError(System.Exception) at File: at Line Number: 0 Method: Void Tick() at File: at Line Number: 0 Method: Void Start(System.Object) at File: at Line Number: 0 Method: Void System.Web.IHttpHandler.ProcessRequest(System.Web.HttpContext) at File: at Line Number: 0 Method: Void Process(System.Web.HttpWorkerRequest) at File: at Line Number: 0 Method: Void RealProcessRequest(System.Object) at File: at Line Number: 0 Method: Void ProcessRequest(System.Web.HttpWorkerRequest) at File: at Line Number: 0 Method: Void ProcessRequest() at File: at Line Number: 0 Method: Void ProcessRequest(Mono.WebServer.MonoWorkerRequest) at File: at Line Number: 0 Method: Void ProcessRequest(Int32, System.String, System.String, System.String, System.String, System.String, Int32, System.String, Int32, System.String, System.String[], System.String[], System.Object) at File: at Line Number: 0 Method: Void InnerRun(System.Object) at File: at Line Number: 0 Method: Void Run(System.Object) at File: at Line Number: 0

    Read the article

  • Expression Blend doesn't recognize comand objects declared in code behind file

    - by Brian Ensink
    I have a WPF UserControl. The code behind file declares some RoutedUICommand objects which are referenced in the XAML. The application builds and runs just fine. However Expression Blend 3 cannot load the XAML in the designer and gives errors like this one: The member "ResetCameraComand" is not recognized or accessible. The class and the member are both public. Building and rebuilding the project in Blend and restarting Blend hasn't helped. Any ideas what the problem is? Here are fragments of my XAML ... <UserControl x:Class="CAP.Visual.CameraAndLightingControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:CAP.Visual;assembly=VisualApp" Height="100" Width="700"> <UserControl.CommandBindings> <CommandBinding Command="local:CameraAndLightingControl.ResetCameraCommand" Executed="ResetCamera_Executed" CanExecute="ResetCamera_CanExecute"/> </UserControl.CommandBindings> .... ... and the code behind C# namespace CAP.Visual { public partial class CameraAndLightingControl : UserControl { public readonly static RoutedUICommand ResetCameraCommand; static CameraAndLightingControl() { ResetCameraCommand = new RoutedUICommand("Reset Camera", "ResetCamera", typeof(CameraAndLightingControl)); }

    Read the article

  • Can't import my module when start my twisted application under root

    - by kepkin
    Here is absolutely minimal application so you could try to reproduce it on your machine. Having two files for example in /home/aln/tmp/tw_test: server.tac MyLib.py MyLib.py class Solver(object): def solve(self): """ do extremely complex stuff here """ print "Hello from solve" server.tac #!/usr/bin/python import MyLib from twisted.application import internet, service from twisted.internet import protocol, reactor, defer, utils, threads from twisted.protocols import basic class MyProtocol(basic.LineReceiver): def lineReceived(self, line): if line=="new job": self.transport.write("started a job" + '\r\n') self.factory.run_defered() class MyFactory(protocol.ServerFactory, MyLib.Solver): protocol = MyProtocol def run_defered_helper(self): self.solve() def run_defered(self): d = threads.deferToThread(self.run_defered_helper) application = service.Application('MyApplication') factory = MyFactory() internet.TCPServer(1079, factory).setServiceParent(service.IServiceCollection(application)) Everything works fine when I start it under non-root user. aln@aln-laptop:tw_test$ twistd -ny server.tac 2010-03-03 22:42:55+0300 [-] Log opened. 2010-03-03 22:42:55+0300 [-] twistd 8.2.0 (/usr/bin/python 2.6.4) starting up. 2010-03-03 22:42:55+0300 [-] reactor class: twisted.internet.selectreactor.SelectReactor. 2010-03-03 22:42:55+0300 [-] <class 'MyFactory'> starting on 1079 2010-03-03 22:42:55+0300 [-] Starting factory <MyFactory object at 0x2d5ea50> 2010-03-03 22:42:59+0300 [MyProtocol,0,127.0.0.1] Hello from solve ^C2010-03-03 22:43:01+0300 [-] Received SIGINT, shutting down. 2010-03-03 22:43:01+0300 [-] (Port 1079 Closed) 2010-03-03 22:43:01+0300 [-] Stopping factory <MyFactory object at 0x2d5ea50> 2010-03-03 22:43:01+0300 [-] Main loop terminated. 2010-03-03 22:43:02+0300 [-] Server Shut Down. But if try to start it under root (which is going to happen in my real application) I receive the following exception: aln@aln-laptop:tw_test$ sudo twistd -ny server.tac [sudo] password for aln: Traceback (most recent call last): File "/usr/lib/python2.6/dist-packages/twisted/application/app.py", line 694, in run runApp(config) File "/usr/lib/python2.6/dist-packages/twisted/scripts/twistd.py", line 23, in runApp _SomeApplicationRunner(config).run() File "/usr/lib/python2.6/dist-packages/twisted/application/app.py", line 411, in run self.application = self.createOrGetApplication() File "/usr/lib/python2.6/dist-packages/twisted/application/app.py", line 494, in createOrGetApplication application = getApplication(self.config, passphrase) --- <exception caught here> --- File "/usr/lib/python2.6/dist-packages/twisted/application/app.py", line 505, in getApplication application = service.loadApplication(filename, style, passphrase) File "/usr/lib/python2.6/dist-packages/twisted/application/service.py", line 390, in loadApplication application = sob.loadValueFromFile(filename, 'application', passphrase) File "/usr/lib/python2.6/dist-packages/twisted/persisted/sob.py", line 215, in loadValueFromFile exec fileObj in d, d File "server.tac", line 2, in <module> import MyLib exceptions.ImportError: No module named MyLib Failed to load application: No module named MyLib If I try to load MyLib module in the python intepreter under root, it works fine: aln@aln-laptop:tw_test$ sudo python Python 2.6.4 (r264:75706, Dec 7 2009, 18:43:55) [GCC 4.4.1] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import MyLib >>> import sys >>> print(sys.path) ['', '/usr/lib/python2.6', '/usr/lib/python2.6/plat-linux2', '/usr/lib/python2.6/lib-tk', '/usr/lib/python2.6/lib-old', '/usr/lib/python2.6/lib-dynload', '/usr/lib/python2.6/dist-packages', '/usr/lib/python2.6/dist-packages/PIL', '/usr/lib/python2.6/dist-packages/gst-0.10', '/usr/lib/pymodules/python2.6', '/usr/lib/python2.6/dist-packages/gtk-2.0', '/usr/lib/pymodules/python2.6/gtk-2.0', '/usr/local/lib/python2.6/dist-packages'] >>> sys.path is absolutely the same for aln user. I tried sudo -E too. Any suggestions?

    Read the article

  • Is there a disassembler + debugger for java (ala OllyDbg / SoftICE for assembler)?

    - by Ran Biron
    Is there a utility similar to OllyDbg / SoftICE for java? I.e. execute class (from jar / with class path) and, without source code, show the disassembly of the intermediate code with ability to step through / step over / search for references / edit specific intermediate code in memory / apply edit to file... If not, is it even possible to write something like this (assuming we're willing to live without hotspot for the debug duration)? Edit: I'm not talking about JAD or JD or Cavaj. These are fine decompilers, but I don't want a decompiler for several reasons, most notable is that their output is incorrect (at best, sometimes just plain wrong). I'm not looking for a magical "compiled bytes to java code" - I want to see the actual bytes that are about to be executed. Also, I'd like the ability to change those bytes (just like in an assembly debugger) and, hopefully, write the changed part back to the class file. Edit2: I know javap exists - but it does only one way (and without any sort of analysis). Example (code taken from the vmspec documentation): From java code, we use "javac" to compile this: void setIt(int value) { i = value; } int getIt() { return i; } to a java .class file. Using javap -c I can get this output: Method void setIt(int) 0 aload_0 1 iload_1 2 putfield #4 5 return Method int getIt() 0 aload_0 1 getfield #4 4 ireturn This is OK for the disassembly part (not really good without analysis - "field #4 is Example.i"), but I can't find the two other "tools": A debugger that goes over the instructions themselves (with stack, memory dumps, etc), allowing me to examine the actual code and environment. A way to reverse the process - edit the disassembled code and recreate the .class file (with the edited code).

    Read the article

  • ActiveX not working properly with default security settings

    - by Ummar
    I have written an ActiveX control in C# and have made it working using regasm command, and it works fine as long as the security level is set to low.. Then as a next step I have made a .cab installer (ICD - Internet component downloader), and have signed my .cab file and ActiveX .dll file with a test certificate. when I hit the html page from my browser the installation parts works fine with default security settings of IE, but at the end it seems that nothing is installed and a red cross is shown on place of ActiveX. Moreover I have explored the Download Program Files folder under Windows directory, in status column it is showing word "unknown". while it is "installed" for all other activeX. what may be the problem. Moreover if i use the regasm command to register the assembly it works fine, and I have signed the ActiveX but still I have to move the security bar to low in my browser setting? why it is so? then what is the purpose of signing? I have used RegisterServer=yes in my .inf file Please let me know, if some one has gone through this problem already?

    Read the article

  • StructureMap resolve dependency through injection instead of service location

    - by Chris Marisic
    In my project I register many ISerializers implementations with the assembly scanner. FWIW this is the code that registers my ISerializers Scan(scanner => { scanner.AssemblyContainingType<ISerializer>(); scanner.AddAllTypesOf<ISerializer>().NameBy(type => type.Name); scanner.WithDefaultConventions(); }); Which then correctly registers ISerializer (...ISerializer) Scoped as: Transient JsonSerializer Configured Instance of ...JsonSerializer BsonSerializer Configured Instance of ...BsonSerializer And so forth. Currently the only way I've been able to figure out how to resolve the serializer I want is to hardcode a service location call with jsonSerializer = ObjectFactory.GetNamedInstance<ISerializer>("JsonSerializer"); Now I know in my class that I specifically want the jsonSerializer so is there a way to configure a rule or similar that says for ISerializer's to connect the named instance based on the property name? So that I could have MySomeClass(ISerializer jsonSerializer, ....) And StructureMap correctly resolve this scenario? Or am I approaching this wrong and perhaps I should just register the concrete type that implements ISerializer and then just specifically use MySomeClass(JsonSerializer jsonSerializer, ....) for something along these lines with the concrete class?

    Read the article

  • Need suggestions on how to extract data from .docx/.doc file then into mssql

    - by DarkPP
    I'm suppose to develop an automated application for my project, it will load past-year examination/exercises paper (word file), detect the sections accordingly, extract the questions and images in that section, and then store the questions and images into the database. (Preview of the question paper is at the bottom of this post) So I need some suggestions on how to extract data from a word file, then inserting them into a database. Currently I have a few methods to do so, however I have no idea how I could implement them when the file contains textboxes with background image. The question has to link with the image. Method One (Make use of ms office interop) Load the word file - Extract image, save into a folder - Extract text, save as .txt - Extract text from .txt then store in db Question: How i detect the section and question. How I link the image to the question. Extract text from word file (Working): private object missing = Type.Missing; private object sFilename = @"C:\temp\questionpaper.docx"; private object sFilename2 = @"C:\temp\temp.txt"; private object readOnly = true; object fileFormat = Word.WdSaveFormat.wdFormatText; private void button1_Click(object sender, EventArgs e) { Word.Application wWordApp = new Word.Application(); wWordApp.DisplayAlerts = Word.WdAlertLevel.wdAlertsNone; Word.Document dFile = wWordApp.Documents.Open(ref sFilename, ref missing, ref readOnly, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing); dFile.SaveAs(ref sFilename2, ref fileFormat, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing,ref missing, ref missing,ref missing,ref missing,ref missing,ref missing, ref missing,ref missing); dFile.Close(ref missing, ref missing, ref missing); } Extract image from word file (Doesn't work on image inside textbox): private Word.Application wWordApp; private int m_i; private object missing = Type.Missing; private object filename = @"C:\temp\questionpaper.docx"; private object readOnly = true; private void CopyFromClipbordInlineShape(String imageIndex) { Word.InlineShape inlineShape = wWordApp.ActiveDocument.InlineShapes[m_i]; inlineShape.Select(); wWordApp.Selection.Copy(); Computer computer = new Computer(); if (computer.Clipboard.GetDataObject() != null) { System.Windows.Forms.IDataObject data = computer.Clipboard.GetDataObject(); if (data.GetDataPresent(System.Windows.Forms.DataFormats.Bitmap)) { Image image = (Image)data.GetData(System.Windows.Forms.DataFormats.Bitmap, true); image.Save("C:\\temp\\DoCremoveImage" + imageIndex + ".png", System.Drawing.Imaging.ImageFormat.Png); } } } private void button1_Click(object sender, EventArgs e) { wWordApp = new Word.Application(); wWordApp.Documents.Open(ref filename, ref missing, ref readOnly, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing, ref missing); try { for (int i = 1; i <= wWordApp.ActiveDocument.InlineShapes.Count; i++) { m_i = i; CopyFromClipbordInlineShape(Convert.ToString(i)); } } finally { object save = false; wWordApp.Quit(ref save, ref missing, ref missing); wWordApp = null; } } Method Two Unzip the word file (.docx) - Copy the media(image) folder, store somewhere - Parse the XML file - Store the text in db Any suggestion/help would be greatly appreciated :D Preview of the word file: (backup link: http://i.stack.imgur.com/YF1Ap.png)

    Read the article

  • Extract enumeration data from .XSD file

    - by Ram
    Hi, I am trying to read enum from a XSD file. The schema is as follows <xs:schema id="ShipReports-v1.xsd" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:msdata="urn:schemas-microsoft-com:xml-msdata" attributeFormDefault="unqualified" elementFormDefault="qualified" msdata:IsDataSet="true"> <xs:simpleType name="Type"> <xs:restriction base="xs:string"> <xs:enumeration value="Op1" /> <xs:enumeration value="Op2" /> <xs:enumeration value="Op3" /> </xs:restriction> </xs:simpleType> </xs:schema> I also tried using this but I am getting list item count as Zero. Following is the code I am using DataSet _sR = new DataSet(); _sR.ReadXmlSchema(assembly.GetManifestResourceStream("v1.xsd")); XmlDocument xDoc = new XmlDocument(); xDoc.LoadXml(_sR.GetXml()); XmlNamespaceManager xMan = new XmlNamespaceManager(xDoc.NameTable); xMan.AddNamespace("xs", "http://www.w3.org/2001/XMLSchema"); XmlNodeList xNodeList = xDoc.SelectNodes( "//xs:schema/xs:simpleType[@name='Type']/xs:enumeration", xMan); string[] enumVal = new string[xNodeList.Count]; int ctr = 0; foreach (XmlNode xNode in xNodeList) { enumVal[ctr] = xNode.Attributes["value"].Value; ctr++; }

    Read the article

  • mod_cgi , mod_fastcgi, mod_scgi , mod_wsgi, mod_python, FLUP. I don't know how many more. what is mo

    - by claws
    I recently learnt Python. I liked it. I just wanted to use it for web development. This thought caused all the troubles. But I like these troubles :) Coming from PHP world where there is only one way standardized. I expected the same and searched for python & apache. http://stackoverflow.com/questions/449055/setting-up-python-on-windows-apache says Stay away from mod_python. One common misleading idea is that mod_python is like mod_php, but for python. That is not true. So what is equivalent of mod_php in python? I need little clarification on this one http://stackoverflow.com/questions/219110/how-python-web-frameworks-wsgi-and-cgi-fit-together CGI, FastCGI and SCGI are language agnostic. You can write CGI scripts in Perl, Python, C, bash, or even Assembly :). So, I guess mod_cgi , mod_fastcgi, mod_scgi are their corresponding apache modules. Right? WSGI is some kind of optimized/improved inshort an efficient version specifically designed for python language only. In order to use this mod_wsgi is a way to go. right? This leaves out mod_python. What is it then? Apache - mod_fastcgi - FLUP (via CGI protocol) - Django (via WSGI protocol) Flup is another way to run with wsgi for any webserver that can speak FCGI, SCGI or AJP What is FLUP? What is AJP? How did Django come in the picture? These questions raise quetions about PHP. How is it actually running? What technology is it using? mod_php & mod_python what are the differences? In future if I want to use Perl or Java then again will I have to get confused? Kindly can someone explain things clearly and give a Complete Picture.

    Read the article

  • How to configure outgoing connections from an SQL stored procedure?

    - by Peter Vestberg
    I am working on a .NET project which uses Microsoft SQL server. In this project, I need a CLR stored procedure (written in C#) that uses a remote web service. So, when the stored procedure is executed on the SQL server, it makes web service calls and thus sends packets to a remote location. The problem is that when executing the SP I get: "System.Net.WebException: The request failed with HTTP status 403: Forbidden." The database user has full permission, the deployed CLR assembly and SP are even marked "unsafe", I tried signing it etc., so any of that is not causing the problem. When I am executing the very same C# code, but from a simple console application instead of as a SP, it all works fine. So I started to suspect a network related problem and had a packet sniffer running when executing both the SP and the console app version. What I realized was that the packets sent out had different destination IP addresses: the console app sent the packets directly to the web service IP while the SP sent the packets to a proxy server we use in our company. Due to network policies the latter is not allowed and that explains the "403 Forbidden" exception. So my question boils down to this: How can I configure the SP/MS SQL server to NOT use that proxy? I want it to send the packets directly to the web service IP, just like the test console app. (again, the C# code is the same , so it's not a programming matter). I've disabled all proxy settings in Internet Explorer in case the SQL server inherits these settings or something. However, no luck. Any help would be greatly appreciated! Best regards, Peter

    Read the article

  • Running multiple applications in STM32 flash

    - by Richard
    Hey! I would like to have two applications in my STM32 flash, one is basically a boot and the other the 'main' application. I have figured out how to load each of them into different areas of flash, and after taking a memory dump everything looks like it is in the right place. So when I do a reset it loads the boot, all the boot does at the moment is jump to the application. Debugging the boot, this all appears to work correctly. However the problems arrives after i've made the jump to the application, it just executes one instruction (assembly) and then jumps back to the boot. It should stay in the application indefinitely. My question is then, where should I 'jump' to in the app? It seems that there are a few potential spots, such as the interrupt vectors, the reset handler, the main function of the app. Actually I've tried all of those with no success. Hopefully that makes sense, i'll update the question if not. thanks for your help! Richard Updates: I had a play around in the debugger and manually changed the program counter to the main of the application, and well that worked a charm, so it makes me think there is something wrong with my jump, why doesn't the program counter keep going after the jump? Actually it seems to be the PSR, the 'T' gets reset on the jump, if I set that again after the jump it continues on with the app as I desire Ok found a solution, seems that you need to have the PC LSB set to 1 when you do a branch or it falls into the 'ARM' mode (32 bit instruction instead of 16 bit instructions like in the 'thumb' mode. Quite an obscure little problem, thanks for letting me share it with you!

    Read the article

  • loaded resources looks ugly

    - by Xaver
    I have the TreeView class using in my project. I use icons for it.First i load icons so: ImageList^ il = gcnew ImageList(); il->Images->Add(Image::FromFile("DISK.ico")); il->Images->Add(Image::FromFile("FILE.ico")); il->Images->Add(Image::FromFile("FOLDER.ico")); treeView1->ImageList = il; All was good. But i dont like that if i delete my icons from directory of project. there is error in my project. I decide to add icons in .resx file. Now icons loading look so: ImageList^ il = gcnew ImageList(); Resources::ResourceManager^ resourceManager = gcnew Resources::ResourceManager ("FilesSaver.Form1", GetType()->Assembly); Object^ disk = resourceManager->GetObject("DISK"); il->Images->Add(reinterpret_cast<Image^>(disk)); Object^ file = resourceManager->GetObject("FILE"); il->Images->Add(reinterpret_cast<Image^>(file)); Object^ folder = resourceManager->GetObject("FOLDER"); il->Images->Add(reinterpret_cast<Image^>(folder)); treeView1->ImageList = il; And why icons in the TreeView looks ugly (they look lighter and have a big black border). Why did this happen?

    Read the article

  • how to insert data if it contain apostrop ?

    - by angel ansari
    Actally my task is load csv file into sql server using c# so i have split it by comma my problem is that some field's data contain apostrop and i m firing insert query to load data into sql so its give error my coding like that using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.IO; using System.Data.SqlClient; namespace tool { public partial class Form1 : Form { StreamReader reader; SqlConnection con; SqlCommand cmd; int count = 0; //int id=0; FileStream fs; string file = null; string file_path = null; SqlCommand sql_del = null; public Form1() { InitializeComponent(); } private void button1_Click(object sender, EventArgs e) { OpenFileDialog file1 = new OpenFileDialog(); file1.ShowDialog(); textBox1.Text = file1.FileName.ToString(); file = Path.GetFileName(textBox1.Text); file_path = textBox1.Text; fs = new FileStream(file_path, FileMode.Open, FileAccess.Read); } private void button2_Click(object sender, EventArgs e) { if (file != null ) { sql_del = new SqlCommand("Delete From credit_debit1", con); sql_del.ExecuteNonQuery(); reader = new StreamReader(file_path); string line_content = null; string[] items = new string[] { }; while ((line_content = reader.ReadLine()) != null) { if (count >=4680) { items = line_content.Split(','); string region = items[0].Trim('"'); string station = items[1].Trim('"'); string ponumber = items[2].Trim('"'); string invoicenumber = items[3].Trim('"'); string invoicetype = items[4].Trim('"'); string filern = items[5].Trim('"'); string client = items[6].Trim('"'); string origin = items[7].Trim('"'); string destination = items[8].Trim('"'); string agingdate = items[9].Trim('"'); string activitydate = items[10].Trim('"'); if ((invoicenumber == "-") || (string.IsNullOrEmpty(invoicenumber))) { invoicenumber = "null"; } else { invoicenumber = "'" + invoicenumber + "'"; } if ((destination == "-") || (string.IsNullOrEmpty(destination))) { destination = "null"; } else { destination = "'" + destination + "'"; } string vendornumber = items[11].Trim('"'); string vendorname = items[12].Trim('"'); string vendorsite = items[13].Trim('"'); string vendorref = items[14].Trim('"'); string subaccount = items[15].Trim('"'); string osdaye = items[16].Trim('"'); string osaa = items[17].Trim('"'); string osda = items[18].Trim('"'); string our = items[19].Trim('"'); string squery = "INSERT INTO credit_debit1" + "([id],[Region],[Station],[PONumber],[InvoiceNumber],[InvoiceType],[FileRefNumber],[Client],[Origin],[Destination], " + "[AgingDate],[ActivityDate],[VendorNumber],[VendorName],[VendorSite],[VendorRef],[SubAccount],[OSDay],[OSAdvAmt],[OSDisbAmt], " + "[OverUnderRecovery] ) " + "VALUES " + "('" + count + "','" + region + "','" + station + "','" + ponumber + "'," + invoicenumber + ",'" + invoicetype + "','" + filern + "','" + client + "','" + origin + "'," + destination + "," + "'" + (string)agingdate.ToString() + "','" + (string)activitydate.ToString() + "','" + vendornumber + "',' " + vendorname + "',' " + vendorsite + "',' " + vendorref + "'," + "'" + subaccount + "','" + osdaye + "','" + osaa + "','" + osda + "','" + our + "') "; cmd = new SqlCommand(squery, con); cmd.CommandTimeout = 1500; cmd.ExecuteNonQuery(); } label2.Text = count.ToString(); Application.DoEvents(); count++; } MessageBox.Show("Process completed"); } else { MessageBox.Show("path select"); } } private void button3_Click(object sender, EventArgs e) { this.Close(); } private void Form1_Load(object sender, EventArgs e) { con = new SqlConnection("Data Source=192.168.50.200;User ID=EGL_TEST;Password=TEST;Initial Catalog=EGL_TEST;"); con.Open(); } } } vendername field contain data (MCCOLLISTER'S TRANSPORTATION) so how to pass this data

    Read the article

  • Set the property hibernate.dialect error message

    - by user281180
    I am having the following error when configuring mvc3 and Nhibernate. Can anyone guide me what I have missed please. the dialect was not set. Set the property hibernate.dialect. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: NHibernate.HibernateException: The dialect was not set. Set the property hibernate.dialect. Source Error: Line 16: { Line 17: NHibernate.Cfg.Configuration configuration = new NHibernate.Cfg.Configuration(); Line 18: configuration.AddAssembly(System.Reflection.Assembly.GetExecutingAssembly()); Line 19: sessionFactory = configuration.BuildSessionFactory(); Line 20: } My web.config is as follows: <configSections> <section name="cachingConfiguration"type="Microsoft.Practices.EnterpriseLibrary.Caching.Configuration.CacheManagerSettings,Microsoft.Practices.EnterpriseLibrary.Caching"/> <section name="log4net"type="log4net.Config.Log4NetConfigurationSectionHandler,log4net"/> <section name="hibernate-configuration"type="NHibernate.Cfg.ConfigurationSectionHandler, NHibernate"/ <appSettings> <add key="BusinessObjectAssemblies" value="Keeper.API"></add> <add key="ConnectionString" value="Server=localhost\SQLSERVER2005;Database=KeeperDev;User=test;Pwd=test;"></add> <add key="ClientValidationEnabled" value="true"/> <add key="UnobtrusiveJavaScriptEnabled" value="true"/> </appSettings> <hibernate-configuration xmlns="urn:nhibernate-configuration-2.2"> <session-factory> <property name="dialect">NHibernate.Dialect.MsSql2000Dialect</property> <property name="connection.provider">NHibernate.Connection.DriverConnectionProvider</property> <property name="connection.connection_string">Server=localhost\SQLServer2005;Database=KeeperDev;User=test;Pwd=test;</property> <property name="proxyfactory.factory_class">NHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle</property> </session-factory> </hibernate-configuration>

    Read the article

  • System.Windows.Forms.DataVisualization Namespace Fine in One Class but Not in Another

    - by jxpx777
    Hi. I'm getting this error The type or namespace name 'DataVisualization' does not exist in the namespace 'System.Windows.Forms' (are you missing an assembly reference?) Here is my using section of the class: using System; using System.Collections; using System.Collections.Generic; using System.Windows.Forms.DataVisualization.Charting; using System.Windows.Forms.DataVisualization.Charting.Borders3D; using System.Windows.Forms.DataVisualization.Charting.ChartTypes; using System.Windows.Forms.DataVisualization.Charting.Data; using System.Windows.Forms.DataVisualization.Charting.Formulas; using System.Windows.Forms.DataVisualization.Charting.Utilities; namespace myNamespace { public class myClass { // Usual class stuff } } The thing is that I am using the same DataVisualization includes in another class. The only thing that I can think that is different is that the classes that are giving this missing namespace error are Solution Items rather than specific to a project. The projects reference them by link. Anyone have thoughts on what the problem is? I've installed the chart component, .Net 3.5 SP1, and the Chart Add-in for Visual Studio 2008. UPDATE: I moved the items from Solution Items to be regular members of my project and I'm still seeing the same behavior. UPDATE 2: Removing the items from the Solution Items and placing them under my project worked. Another project was still referencing the files which is why I didn't think it worked previously. I'm still curious, though, why I couldn't use the namespace when the classes were Solution Items but moving them underneath a project (with no modifications, mind you) instantly made them recognizable. :\

    Read the article

  • Hiding Command Prompt with CodeDomProvider

    - by j-t-s
    Hi All I've just got my own little custom c# compiler made, using the article from MSDN. But, when I create a new Windows Forms application using my sample compiler, the MSDOS window also appears, and if I close the DOS window, my WinForms app closes too. How can I tell the Compiler? not to show the MSDOS window at all? Thank you :) Here's my code: using System; namespace JTS { public class CSCompiler { protected string ot, rt, ss, es; protected bool rg, cg; public string Compile(String se, String fe, String[] rdas, String[] fs, Boolean rn) { System.CodeDom.Compiler.CodeDomProvider CODEPROV = System.CodeDom.Compiler.CodeDomProvider.CreateProvider("CSharp"); ot = fe; System.CodeDom.Compiler.CompilerParameters PARAMS = new System.CodeDom.Compiler.CompilerParameters(); // Ensure the compiler generates an EXE file, not a DLL. PARAMS.GenerateExecutable = true; PARAMS.OutputAssembly = ot; PARAMS.CompilerOptions = "/target:winexe"; PARAMS.ReferencedAssemblies.Add(typeof(System.Xml.Linq.Extensions).Assembly.Location); PARAMS.LinkedResources.Add("this.ico"); foreach (String ay in rdas) { if (ay.Contains(".dll")) PARAMS.ReferencedAssemblies.Add(ay); else { string refd = ay; refd = refd + ".dll"; PARAMS.ReferencedAssemblies.Add(refd); } } System.CodeDom.Compiler.CompilerResults rs = CODEPROV.CompileAssemblyFromFile(PARAMS, fs); if (rs.Errors.Count > 0) { foreach (System.CodeDom.Compiler.CompilerError COMERR in rs.Errors) { es = es + "Line number: " + COMERR.Line + ", Error number: " + COMERR.ErrorNumber + ", '" + COMERR.ErrorText + ";" + Environment.NewLine + Environment.NewLine; } } else { // Compilation succeeded. es = "Compilation Succeeded."; if (rn) System.Diagnostics.Process.Start(ot); } return es; } } }

    Read the article

  • Hiding Command Prompt with CodeDomProvider

    - by j-t-s
    Hi All I've just got my own little custom c# compiler made, using the article from MSDN. But, when I create a new Windows Forms application using my sample compiler, the MSDOS window also appears, and if I close the DOS window, my WinForms app closes too. How can I tell the Compiler? not to show the MSDOS window at all? Thank you :) Here's my code: using System; namespace JTS { public class CSCompiler { protected string ot, rt, ss, es; protected bool rg, cg; public string Compile(String se, String fe, String[] rdas, String[] fs, Boolean rn) { System.CodeDom.Compiler.CodeDomProvider CODEPROV = System.CodeDom.Compiler.CodeDomProvider.CreateProvider("CSharp"); ot = fe; System.CodeDom.Compiler.CompilerParameters PARAMS = new System.CodeDom.Compiler.CompilerParameters(); // Ensure the compiler generates an EXE file, not a DLL. PARAMS.GenerateExecutable = true; PARAMS.OutputAssembly = ot; PARAMS.CompilerOptions = "/target:winexe"; PARAMS.ReferencedAssemblies.Add(typeof(System.Xml.Linq.Extensions).Assembly.Location); PARAMS.LinkedResources.Add("this.ico"); foreach (String ay in rdas) { if (ay.Contains(".dll")) PARAMS.ReferencedAssemblies.Add(ay); else { string refd = ay; refd = refd + ".dll"; PARAMS.ReferencedAssemblies.Add(refd); } } System.CodeDom.Compiler.CompilerResults rs = CODEPROV.CompileAssemblyFromFile(PARAMS, fs); if (rs.Errors.Count > 0) { foreach (System.CodeDom.Compiler.CompilerError COMERR in rs.Errors) { es = es + "Line number: " + COMERR.Line + ", Error number: " + COMERR.ErrorNumber + ", '" + COMERR.ErrorText + ";" + Environment.NewLine + Environment.NewLine; } } else { // Compilation succeeded. es = "Compilation Succeeded."; if (rn) System.Diagnostics.Process.Start(ot); } return es; } } }

    Read the article

  • searching for a programming platform with hot code swap

    - by Andreas
    I'm currently brainstorming over the idea how to upgrade a program while it is running. (Not while debugging, a "production" system.) But one thing that is required for it, is to actually submit the changed source code or compiled byte code into the running process. Pseudo Code var method = typeof(MyClass).GetMethod("Method1"); var content = //get it from a database (bytecode or source code) SELECT content FROM methods WHERE id=? AND version=? method.SetContent(content); At first, I want to achieve the system to work without the complexity of object-orientation. That leads to the following requirements: change source code or byte code of function drop functions add new functions change the signature of a function With .NET (and others) I could inject a class via an IoC and could thus change the source code. But the loading would be cumbersome, because everything has to be in an Assembly or created via Emit. Maybe with Java this would be easier? The whole ClassLoader is replacable, I think. With JavaScript I could achieve many of the goals. Simply eval a new function (MyMethod_V25) and assign it to MyClass.prototype.MyMethod. I think one can also drop functions somehow with "del" Which general-purpose platform can handle such things?

    Read the article

  • % style macros not supported in some C++/CLI project property pages under VS2010?

    - by Dave Foster
    We're currently evaluating VS2010 and have upgraded our VS2008 C++/CLI project to the new .vcxproj format. I've noticed that a certain property we had set in the project settings did not get translated properly. Under Configuration Properties - Managed Resources - Resource Logical Name, we used to have (in VS2008) the setting: $(IntDir)\$(RootNamespace).$(InputName).resources which indicated that all .resx files were to compile into OurLib.SomeForm.resources inside of the assembly. (the Debug portion is dropped when assembled) According to MSDN, the $(InputName) macro no longer exists and should be replaced with %(Filename). However, when translating the above line to swap those macros, it does not seem to ever expand. The second .resx file it tries to compile, I get a "LINK : fatal error LNK1316: duplicate managed resource name 'Debug\OurLib.%(Filename).resources". This indicates to me that the % style macros are not being expanded here, at least in this specific property. If we don't set anything in that property, the default behavior seems to be to add the subdirectory as a prefix, such as: OurLib.Forms.SomeForm.resources where Forms is the subdir of our project that the .resx file lives. This only occurs when the .resx file is in an immediate subdirectory of the project being built. If a .resx file exists somewhere else on disk (aka ..\OtherLib\Forms\SomeForm2.resx) this prefix is NOT added. This is causing an issue with loading form resources, as it does not account for this possible prefix, even though we are using the standard Forms Designer method of getting at resources: System::ComponentModel::ComponentResourceManager^ resources = (gcnew System::ComponentModel::ComponentResourceManager(SomeForm::typeid)); and do not specify the .resources file by name. The issue I've just described may not be the same as the original question, but if I were to fix the Resource Logical Name issue I think this would all go away. Does anyone have any information about these % macros and where they are allowed to be used?

    Read the article

  • C# compiler error CS0006: metadata file is not found

    - by Rob
    I've built a c# compiler using the tutorial on MSDN and a few other resources including here, and I've gotten it to work until I add additional reference assemblies. My errors stem from adding "System.dll" and "System.Windows.Forms.dll" to the ReferenceAssemblies list. here's my code: private void SetUpCompilingParameters() { string ver = string.Format("{0}.{1}.{2}", Environment.Version.Major, Environment.Version.MajorRevision, Environment.Version.Build); string libDir = string.Format(@"{0}", Environment.CurrentDirectory); string raDir = @"C:\Program Files (x86)\Reference Assemblies\Microsoft\Framework\.NETFramework\v4.0"; string exWpfDir = string.Format(@"C:\WINDOWS\Microsoft.NET\Framework\v{0}\WPF", ver); string exDir = string.Format(@"C:\WINDOWS\Microsoft.NET\Framework\v{0}", ver); MyCompiler = new CSharpCodeProvider(); CompilingParam = new CompilerParameters(); CompilingParam.GenerateExecutable = false; CompilingParam.GenerateInMemory = true; CompilingParam.IncludeDebugInformation = false; CompilingParam.TreatWarningsAsErrors = false; CompilingParam.CompilerOptions = string.Format("/lib:{0}", libDir); CompilingParam.CompilerOptions = string.Format("/lib:{0}", raDir); CompilingParam.CompilerOptions = string.Format("/lib:{0}", exDir); //CompilingParam.CompilerOptions = string.Format("/lib:{0}", exWpfDir); CompilingParam.ReferencedAssemblies.Add("System.dll"); CompilingParam.ReferencedAssemblies.Add("System.Windows.Forms.dll"); } As you can see, I've explicitly referenced directories in CompilerOptions but its not helping. I'd like to test the solution on here on stackoverflow that utilizes: CompilingParam.ReferencedAssemblies.Add(typeof(System.Xml.Linq.Extensions).Assembly.Location); but I'm having trouble using it for the general System.dll etc...

    Read the article

  • Why won't VS2010 RC use my existing types when I add a service reference?

    - by Johan Driessen
    I have a huge problem getting services references in VS2010 RC to use existing assemblies. Even though I have a class library with all the data contracts (classes marked with DataContract and properties with DataMember) that is shared between the service project and the consuming project (which is a class library), when I add a service reference, the data contracts are regenerated withing the service reference instead of using the existing types. When I was using VS2010 beta 2, this worked fine, and I have existing service references using the very same data contracts. But if I add a new service reference, or even update an old one, it won't use the existing types anymore. I have made a mini-test-solution, with one service, one data contract type and one console app as a consumer (all in the same solution), and there it seems to work, but that's no great comfort to me. Is there any way to see why it can't use the existing types? Edit to clearify. It works to generate the proxy classes with svcutil.exe, and point to the data contracts dll, like this: svcutil.exe http://localhost/MyService.svc /reference:[Path To DataContracts]\DataContracts.dll /n:*,MyProject.MyServiceReference /ct:System.Collections.Generic.List`1 The question is, what possible reason could there be for Visual Studio to generate its own datacontracts instead of using the existing ones even though the "reuse" checkbox is checked and the datacontracts assembly is referenced.

    Read the article

  • Can I serialize an object if I didn't write the class used to instantiate that object?

    - by Richard77
    Hello, I've a simple class [Serializable] public class MyClass { public String FirstName { get; set: } public String LastName { get; set: } //Bellow is what I would like to do //But, it's not working //I get an exception ContactDataContext db = new ContactDataContext(); public void Save() { Contact contact = new Contact(); contact.FirstName = FirstName; contact.LastName = LastName; db.Contacts.InsertOnSubmit(contact); db.SubmitChanges(); } } I wanted to attach a Save method to the class so that I could call it on each object. When I introduced the above statement which contains ContactDataContext, I got the following error "In assembly ... PublicKeyToken=null' is not marked as serializable" It's clear that the DataContext class is generated by the framework (). I checked and did not see where that class was marked serialize. What can I do to overcome that? What's the rule when I'm not the author of a class? Just go ahead and mark the DataContext class as serializable, and pretend that everything will work? Thanks for helping

    Read the article

< Previous Page | 532 533 534 535 536 537 538 539 540 541 542 543  | Next Page >