Search Results

Search found 23271 results on 931 pages for 'static classes'.

Page 54/931 | < Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >

  • How to set a static route for an external IP address

    - by HorusKol
    Further to my earlier question about bridging different subnets - I now need to route requests for one particular IP address differently to all other traffic. I have the following routing in my iptables on our router: # Allow established connections, and those !not! coming from the public interface # eth0 = public interface # eth1 = private interface #1 (10.1.1.0/24) # eth2 = private interface #2 (129.2.2.0/25) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i eth0 -o eth2 -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow outgoing connections from the private interfaces iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT iptables -A FORWARD -i eth2 -o eth0 -j ACCEPT # Allow the two private connections to talk to each other iptables -A FORWARD -i eth1 -o eth2 -j ACCEPT iptables -A FORWARD -i eth2 -o eth1 -j ACCEPT # Masquerade (NAT) iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE # Don't forward any other traffic from the public to the private iptables -A FORWARD -i eth0 -o eth1 -j REJECT iptables -A FORWARD -i eth0 -o eth2 -j REJECT This configuration means that users will be forwarded through a modem/router with a public address - this is all well and good for most purposes, and in the main it doesn't matter that all computers are hidden behind the one public IP. However, some users need to be able to access a proxy at 192.111.222.111:8080 - and the proxy needs to identify this traffic as coming through a gateway at 129.2.2.126 - it won't respond otherwise. I tried adding a static route on our local gateway with: route add -host 192.111.222.111 gw 129.2.2.126 dev eth2 I can successfully ping 192.111.222.111 from the router. When I trace the route, it lists the 129.2.2.126 gateway, but I just get * on each of the following hops (I think this makes sense since this is just a web-proxy and requires authentication). When I try to ping this address from a host on the 129.2.2.0/25 network it fails. Should I do this in the iptables chain instead? How would I configure this routing?

    Read the article

  • Nginx redirect all request that does not match a file to a php file

    - by cyrbil
    I'm trying to get all request to: http://mydomain.com/downloads/* redirect to http://mydomain.com/downloads/index.php except if the requested file exist in /downloads/ ex: http://mydomain.com/downloads = /downloads/index.php http://mydomain.com/downloads/unknowfile = /downloads/index.php http://mydomain.com/downloads/existingfile = /downloads/existingfile My current problem is I have either the redirection to php working but static files not served or the opposite. Here is my current vhost conf: (which redirect fine but static files are send to php and fail) server { listen 80; ## listen for ipv4; this line is default and implied server_name domain.com; root /data/www; index index.php index.html; location / { try_files $uri $uri/ /index.html; } error_page 404 /404.html; # redirect server error pages to the static page /50x.html error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/www; } location ^~ /downloads { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_index index.php; include fastcgi_params; try_files $uri @downloads; } location @downloads { rewrite ^ /downloads/index.php; } # pass the PHP scripts to FastCGI server # location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } } Precision: static files are symlinks created by /downloads/index.php Thank you for your help.

    Read the article

  • Cisco ASA 5505 network route for static IP hosts

    - by TheCapn
    I've configured my internal VLAN using the most basic settings where ports 1-7 are assigned from a pool of addresses in the range 192.168.15.5 - 192.168.15.36. These hosts are given access to the internet and it works great. What I'm trying to set up now is allowing users who are connected to the device and specify their IP (say I connect and request 192.168.15.45) are given internet access and can still work alongside DHCP hosts. Those with a DHCP assigned address are blocked from the internet. Mostly the issue resides in that I am very new to working with the device. I feel that the solution is easy but I'm not looking in the right spots and don't have the correct terminology down to google it. Do I need to define access control lists? Group policies? a new VLAN? The rules that are set up seem to be specific to the entire /24 subnet but when I request a static IP outside of the DHCP range I get blocked from other hosts and the internet.

    Read the article

  • Java/BlackBerry build error overriding too many classes

    - by behrk2
    Hey everyone, Has anyone ever heard of overriding too many classes in Java? Perhaps this issue is just related to BlackBerry development, but I was wondering if it is an issue in Java, too. Let's say I have the following: LabelField lblTitle = new LabelField(title) { protected void paint(Graphics graphics) { graphics.setColor(0x00FFFFFF); graphics.clear(); super.paint(graphics); } }; LabelField lblSubTitle = new LabelField(releaseYear + ", " + rating) { protected void paint(Graphics graphics) { graphics.setColor(0x00FFFFFF); graphics.clear(); super.paint(graphics); } }; This code works. However, I've noticed that by overriding the paint() method multiple times in many different classes throughout my project, I receive the error: I/O Error: Cannot run program "jar": CreateProcess error=2, The system cannot find the file specified My only solution thus far is to clean up my GUI code...minimize it and reuse it. Perhaps its good that this happened so I can be less careless about creating GUI code all over my classes. Anyways, I was just wondering if anyone has heard of this before. If you are interested in reading more about the issue I have been facing, check out the following link: BlackBerry Java Development Forums

    Read the article

  • web service - client classes

    - by Noona
    The web service that I implemented is up and running, when I try to run the client I get the following error with regard to the classes that were generated using wsimport, Caused by: java.security.PrivilegedActionException: com.sun.xml.internal.bind.v2.runtime.IllegalAnnotationsException: 4 counts of IllegalAnnotationExceptions Two classes have the same XML type name "{http://server.agency.hw2/}userJoined". Use @XmlType.name and @XmlType.namespace to assign different names to them. this problem is related to the following location: at hw2.chat.backend.main.generatedfromserver.UserJoined at public javax.xml.bind.JAXBElement hw2.chat.backend.main.generatedfromserver.ObjectFactory.createUserJoined(hw2.chat.backend.main.generatedfromserver.UserJoined) at hw2.chat.backend.main.generatedfromserver.ObjectFactory this problem is related to the following location: at ChatCompany.BackendChatServer.hw2.chat.backend.main.generatedfromserver.UserJoined Two classes have the same XML type name "{http://server.agency.hw2/}userJoinedResponse". Use @XmlType.name and @XmlType.namespace to assign different names to them. this problem is related to the following location: at hw2.chat.backend.main.generatedfromserver.UserJoinedResponse at public javax.xml.bind.JAXBElement hw2.chat.backend.main.generatedfromserver.ObjectFactory.createUserJoinedResponse(hw2.chat.backend.main.generatedfromserver.UserJoinedResponse) But I can't figure out what exactly is meant by the error. I am assuming I need to change something in annotations in this class as pointed out by the compiler: @XmlAccessorType(XmlAccessType.FIELD) @XmlType(name = "userJoinedResponse") public class UserJoinedResponse { } could someone please point out why there's a name collision and what annotations I need to change? thanks

    Read the article

  • IntelliJ IDEA plugin development: Get classes VirtualFile (or paths) for a specific source VirtualFi

    - by Ran Biron
    Hi all. This is a cross-post from http://www.jetbrains.net/devnet/message/5264436#5264436 - I failed to get any answer on that forum for two weeks now, so I'm re-asking it here (please don't flame). This question refers to plugin development for the IntelliJ IDEA IDE, specifically targeting java development: Is there any API to get the list of .class files for given source file? I'm trying to write a plugin that creates a binary patch jar based on a changelist. I've managed to get the changelist and, from it, a list of source files (VirtualFile). Now I'm trying to get the compiled class files for these source files (I don't mind preforming a "make" or relying on the previous compile output). I've played a bit with ProjectFileIndex but could only find the classes root. I'd hate to do a "dumb" path-based search because inner classes (and inner anonymous classes) would make it difficult to get correctly. Is there such an API? Or am I doomed to parse the paths? Thanks, Ran.

    Read the article

  • Force compile-time linking of all classes in a SWC

    - by aaaidan
    Using Flash CS4, I am making a game that has a dozen or so sounds and a couple of music tracks. To cut down on publish/compile time, I have moved the sounds and music into an (external) SWC, which is located in a "Library Path" for the project. This works, but with a caveat... Until before I externalised the assets, I had been dynamically instantiating the Sound objects of the embedded sound by getting their classes with getDefinitionByName. // something like... var soundSubClass:Class = Class(getDefinitionByName(soundClassName)); var mySound:Sound = new soundSubClass(); But now that they're located in an external SWC, I need to have "concrete" references to the classes in order to load them like this, otherwise they are not included in the published SWF, and there is a runtime error when getDefinitionByName tries to get a class that doesn't exist. So, my question: in Flash Professional CS4, is there any way to force a library's assets to be included, regardless of whether they are statically linked? FlashDevelop has a compiler option "SWC Include Libraries", which is exactly what I want, and is distinct from the "SWC Libraries" option. The description of the "SWC Include Libraries" option is "Links all classes inside a SWC file to the resulting application SWF file, regardless of whether or not they are used." (Also, it's important to me that all the assets are contained within the one compiled SWF. Linking at runtime isn't what I'm after.)

    Read the article

  • Linq 2 SQL Store inherited classes - not mapped to tables in the database

    - by user348672
    Hi. I'm trying to introduce the Linq2SQL technique into the project and have encountered the following issue: I've created ORM classes based on the Northwind database. In some other application I create several classes derived from the Linq2SQL classes. I'm able to add such a class to EntitySet but the application fails to submit changes. Is there any way around this? Sample code(MyClass is derived from the Order): DataClasses1DataContext northwind = new DataClasses1DataContext(); Product chai = northwind.Products.Single(p => p.ProductName == "Chai"); Product tofu = northwind.Products.Single(p => p.ProductName == "Tofu"); Order myOrder = new Order(); myOrder.OrderDate = DateTime.Now; myOrder.RequiredDate = DateTime.Now.AddDays(1); myOrder.Freight = 34; Order_Detail myItem1 = new Order_Detail(); myItem1.Product = chai; myItem1.Quantity = 12345; Order_Detail myItem2 = new Order_Detail(); myItem2.Product = tofu; myItem2.Quantity = 3; myOrder.Order_Details.Add(myItem1); myOrder.Order_Details.Add(myItem2); Customer myCustomer = northwind.Customers.Single(c => c.CompanyName == "B's Beverages"); MyClass newOrder = new MyClass(); newOrder.OrderDate = DateTime.Now; newOrder.RequiredDate = DateTime.Now.AddDays(31); newOrder.Freight = 35; Order_Detail myItem3 = new Order_Detail(); myItem3.Product = tofu; myItem3.Quantity = 3; newOrder.Order_Details.Add(myItem3); myCustomer.Orders.Add(myOrder); myCustomer.Orders.Add(newOrder); As I said I'm able to add the newOrder object but unable to submit into the database.

    Read the article

  • Model binding & derived model classes

    - by Richard Ev
    Does ASP.NET MVC offer any simple way to get model binding to work when you have model classes that inherit from others? In my scenario I have a View that is strongly typed to List<Person>. I have a couple of classes that inherit from Person, namely PersonTypeOne and PersonTypeTwo. I have three strongly typed partial views with names that match these class names (and render form elements for the properties of their respective models). This means that in my main View I can have the following code: <% for(int i = 0; i < Model.Count; i++) { Html.RenderPartial(Model[i].GetType().Name, Model[i]); } %> This works well, apart from when the user submits the form the relevant controller action method just gets a List<Person>, rather than a list of Person, PersonTypeOne and PersonTypeTwo. This is pretty much as expected as the form submission doesn't contain enough information to tell the default model binder to create any instances of PersonTypeOne and PersonTypeTwo classes. So, is there any way to get such functionality from the default model binder?

    Read the article

  • Concept of WNDCLASSEX, good programming habits and WndProc for system classes

    - by luiscubal
    I understand that the Windows API uses "classes", relying to the WNDCLASS/WNDCLASSEX structures. I have successfully gone through windows API Hello World applications and understand that this class is used by our own windows, but also by Windows core controls, such as "EDIT", "BUTTON", etc. I also understand that it is somehow related to WndProc(it allows me to define a function for it) Although I can find documentation about this class, I can't find anything explaining the concept. So far, the only thing I found about it was this: A Window Class has NOTHING to do with C++ classes. Which really doesn't help(it tells me what it isn't but doesn't tellme what it is). In fact, this only confuses me more, since I'd be tempted to associate WNDCLASSEX to C++ classes and think that "WNDCLASSEX" represents a control type . So, my first question is What is it? In second place, I understand that one can define a WndProc in a class. However, a window can also get messages from the child controls(or windows, or whatever they are called in the Windows API). How can this be? Finally, when is it a good programming practise to define a new class? Per application(for the main frame), per frame, one per control I define(if I create my own progress bar class, for example)? I know Java/Swing, C#/Windows.Form, C/GTK+ and C++/wxWidgets, so I'll probably understand comparisons with these toolkits.

    Read the article

  • Handles Comparison: empty classes vs. undefined classes vs. void*

    - by Nawaz
    Microsoft's GDI+ defines many empty classes to be treated as handles internally. For example, (source GdiPlusGpStubs.h) //Approach 1 class GpGraphics {}; class GpBrush {}; class GpTexture : public GpBrush {}; class GpSolidFill : public GpBrush {}; class GpLineGradient : public GpBrush {}; class GpPathGradient : public GpBrush {}; class GpHatch : public GpBrush {}; class GpPen {}; class GpCustomLineCap {}; There are other two ways to define handles. They're, //Approach 2 class BOOK; //no need to define it! typedef BOOK *PBOOK; typedef PBOOK HBOOK; //handle to be used internally //Approach 3 typedef void* PVOID; typedef PVOID HBOOK; //handle to be used internally I just want to know the advantages and disadvantages of each of these approaches. One advantage with Microsoft's approach is that, they can define type-safe hierarchy of handles using empty classes, which (I think) is not possible with the other two approaches. What else? EDIT: One advantage with the second approach (i.e using incomplete classes) is that we can prevent clients from dereferencing the handles (that means, this approach appears to support encapsulation strongly, I suppose). The code would not even compile if one attempts to dereference handles. What else?

    Read the article

  • are these css classes names good?

    - by metal-gear-solid
    See section /* Common Classes */ of this page. http://webdesign.about.com/od/css/a/master_stylesht_2.htm are these css classes good, to use in any project? in terms of semantic? /* Common Classes */ .clear { clear: both; } .floatLeft { float: left; } .floatRight { float: right; } .textLeft { text-align: left; } .textRight { text-align: right; } .textCenter { text-align: center; } .textJustify { text-align: justify; } .blockCenter { display: block; margin-left: auto; margin-right: auto; } /* remember to set width */ .bold { font-weight: bold; } .italic { font-style: italic; } .underline { text-decoration: underline; } .noindent { margin-left: 0; padding-left: 0; } .nomargin { margin: 0; } .nopadding { padding: 0; } .nobullet { list-style: none; list-style-image: none; }

    Read the article

  • Populating and Using Dynamic Classes in C#/.NET 4.0

    - by Bob
    In our application we're considering using dynamically generated classes to hold a lot of our data. The reason for doing this is that we have customers with tables that have different structures. So you could have a customer table called "DOG" (just making this up) that contains the columns "DOGID", "DOGNAME", "DOGTYPE", etc. Customer #2 could have the same table "DOG" with the columns "DOGID", "DOG_FIRST_NAME", "DOG_LAST_NAME", "DOG_BREED", and so on. We can't create classes for these at compile time as the customer can change the table schema at any time. At the moment I have code that can generate a "DOG" class at run-time using reflection. What I'm trying to figure out is how to populate this class from a DataTable (or some other .NET mechanism) without extreme performance penalties. We have one table that contains ~20 columns and ~50k rows. Doing a foreach over all of the rows and columns to create the collection take about 1 minute, which is a little too long. Am I trying to come up with a solution that's too complex or am I on the right track? Has anyone else experienced a problem like this? Create dynamic classes was the solution that a developer at Microsoft proposed. If we can just populate this collection and use it efficiently I think it could work.

    Read the article

  • How can I extend a LINQ-to-SQL class without having to make changes every time the code is generated

    - by csharpnoob
    Hi, Update from comment: I need to extend linq-to-sql classes by own parameters and dont want to touch any generated classes. Any better suggestes are welcome. But I also don't want to do all attributes assignments all time again if the linq-to-sql classes are changing. so if vstudio generates new attribute to a class i have my own extended attributes kept separate, and the new innerited from the class itself Original question: i'm not sure if it's possible. I have a class car and a class mycar extended from class car. Class mycar has also a string list. Only difference. How can i cast now any car object to a mycar object without assigning all attributes each by hand. Like: Car car = new Car(); MyCar mcar = (MyCar) car; or MyCar mcar = new MyCar(car); or however i can extend car with own variables and don't have to do always Car car = new Car(); MyCar mcar = new MyCar(); mcar.name = car.name; mcar.xyz = car.xyz; ... Thanks.

    Read the article

  • Getting all the classes in project and their packages from CodeRush extension

    - by drasto
    I've spent some time trying to find a way CodeRush could add using when it finds undeclared element that is in the fact class name with no using added. The solution suggested in this answer to my question (Refactor_resolve) does not work (bugged?). In a process I found out that writing plug-ins for CodeRush is easy, so I decided to code this functionality myself (and share it). I'd only implement a CodeProvider (like in this tutorial). The only thinks I need to do the job are answers to this questions: At the start up of my plugin I need to get a list (set, map, whatever) of all classes and their packages. This means all the classes(interfaces...) and their packages in project, and within all referenced libraries. And I also need to receive updated on this (when user adds reference, creates new class). Can I get this from some CodeRush classes or maybe VS interface available from CodeProvider class? How do I add created CodeProvider to the pop-up that is shown when user hovers over an Issue?

    Read the article

  • Organising files and classes in XCode (iPhone application)

    - by pulegium
    It's a generic question and really a newbie one too, so bear with me... I'm playing with some iPhone development, and trying to create a simple "flip type" application. Nothing sophisticated, let's say on the flip side is a short application summary, bit like 'help' and on the main screen is a simple board game, let's say tic-tac-toe or similar. Now, XCode has generated me 'Main View', 'Flipside View' and 'Application Delegate' folders, with default template files in them. Now the question is where do I create appropriate 'MVC' classes? Let's say (V)iew classes are going to be the ones that have been automatically created. So the Flipside view class is responsible for generating text/images etc on the 'help' view. 'Main View' class is what draws the items on the table and updates the counters, etc. Where should I place the 'controller' class? And also, should it only be dealing with proxying only to the model? According to this the controller method is called from the view and manipulates the method classes. Similarly, the results from model are passed back to the view class by the controller issuing the calls to appropriate view methods. Similarly, where does the model class go? or should I just create a new folder for each, controller and model class files? What I'm after is the best practices, or just a short description how people normally structure their applications. I know it's very specific and also undefined... I came from Django background, so the way stuff is organised there is slightly different. Hope this makes sense, sorry if it's all bit vague, but I have to start somewhere :) And yes I've read quite few docs on the apple developer site, but trouble is that the documents are either going into too much detail about the language/framework/etc and the examples are way too simplistic. Actually, this leads me to the final question, has anyone know any good example of relatively complete application tutorial which I could use as a reference in organising my files?...

    Read the article

  • KVM network bridge and public static IP for both host and guests

    - by Javier Martinez
    I have a Debian Server with 4 public static addresses. There is a KVM guest (also Debian) installed and running. What I want is to give the guest an IP of the host, so that both machines have public IPs. IP 1: 188.165.A.B IP 2: 178.33.CCC.D IP 3: 178.33.CCC.E IP 4: 178.33.CCC.F What should I do to have connection for host and guest ? This is network conf: # ifconfig br0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:188.165.A.B Bcast:188.165.255.255 Mask:255.255.255.0 inet6 addr: fe80::ea40:f2ff:fe0a:cc28/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3618 errors:0 dropped:4 overruns:0 frame:0 TX packets:4853 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:599562 (585.5 KiB) TX bytes:1693443 (1.6 MiB) eth0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet6 addr: fe80::ea40:f2ff:fe0a:cc28/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4274 errors:0 dropped:0 overruns:0 frame:0 TX packets:4879 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:720045 (703.1 KiB) TX bytes:1715641 (1.6 MiB) Interrupt:20 Memory:fe500000-fe520000 eth0:0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.D Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 eth0:1 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.E Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 eth0:2 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.F Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:27932 errors:0 dropped:0 overruns:0 frame:0 TX packets:27932 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1820862 (1.7 MiB) TX bytes:1820862 (1.7 MiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:87:40:ec inet6 addr: fe80::fc54:ff:fe87:40ec/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18 errors:0 dropped:0 overruns:0 frame:0 TX packets:204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:1452 (1.4 KiB) TX bytes:16958 (16.5 KiB) #route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default aa.bb.cc.eu 0.0.0.0 UG 0 0 0 br0 188.165.255.0 * 255.255.255.0 U 0 0 0 br0 # brctl show bridge name bridge id STP enabled interfaces br0 8000.e840f20acc28 no eth0 vnet0 There is no firewall enabled and DNS is configured properly. What I want to achieve: | | | +----+-------------------------+-+------+ | | Host | | | | | | | | | | +------------+------+ | | eth0 | eth0:0-1 | | | 188.165.A.B | | | | | | | | | br0 vnet0 | | | +------------+------+ | | | | | | | | +------------+------+ | | | | | | | | eth0:2-+ | | | | 178.33.CCC.F | | | | | | | | Guest | | | +-------------------+ | +---------------------------------------+ Thanks you

    Read the article

  • KVM network bridge and public static IP for both host and guests

    - by Javier Martinez
    I have a Debian Server with 4 public static addresses. There is a KVM guest (also Debian) installed and running. What I want is to give the guest an IP of the host, so that both machines have public IPs. IP 1: 188.165.A.B IP 2: 178.33.CCC.D IP 3: 178.33.CCC.E IP 4: 178.33.CCC.F What should I do to have connection for host and guest ? This is network conf: # ifconfig br0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:188.165.A.B Bcast:188.165.255.255 Mask:255.255.255.0 inet6 addr: fe80::ea40:f2ff:fe0a:cc28/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3618 errors:0 dropped:4 overruns:0 frame:0 TX packets:4853 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:599562 (585.5 KiB) TX bytes:1693443 (1.6 MiB) eth0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet6 addr: fe80::ea40:f2ff:fe0a:cc28/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4274 errors:0 dropped:0 overruns:0 frame:0 TX packets:4879 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:720045 (703.1 KiB) TX bytes:1715641 (1.6 MiB) Interrupt:20 Memory:fe500000-fe520000 eth0:0 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.D Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 eth0:1 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.E Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 eth0:2 Link encap:Ethernet HWaddr e8:40:f2:0a:cc:28 inet addr:178.33.CCC.F Bcast:178.33.255.255 Mask:255.255.255.255 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:20 Memory:fe500000-fe520000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:27932 errors:0 dropped:0 overruns:0 frame:0 TX packets:27932 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1820862 (1.7 MiB) TX bytes:1820862 (1.7 MiB) vnet0 Link encap:Ethernet HWaddr fe:54:00:87:40:ec inet6 addr: fe80::fc54:ff:fe87:40ec/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18 errors:0 dropped:0 overruns:0 frame:0 TX packets:204 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:1452 (1.4 KiB) TX bytes:16958 (16.5 KiB) #route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default aa.bb.cc.eu 0.0.0.0 UG 0 0 0 br0 188.165.255.0 * 255.255.255.0 U 0 0 0 br0 # brctl show bridge name bridge id STP enabled interfaces br0 8000.e840f20acc28 no eth0 vnet0 There is no firewall enabled and DNS is configured properly. What I want to achieve: | | | +----+-------------------------+-+------+ | | Host | | | | | | | | | | +------------+------+ | | eth0 | eth0:0-1 | | | 188.165.A.B | | | | | | | | | br0 vnet0 | | | +------------+------+ | | | | | | | | +------------+------+ | | | | | | | | eth0:2-+ | | | | 178.33.CCC.F | | | | | | | | Guest | | | +-------------------+ | +---------------------------------------+ Thanks you

    Read the article

  • Pxe net install Centos with Static IP

    - by Stu2000
    I seem to be unable to perform a kickstart installation of centos5.8 with a netinstall. It correctly gets into the text installer, but keeps sending out a request for the dhcp server and failing. I have tried to manually set the IP everywhere. Here is my pxelinux.cfg file DEFAULT menu PROMPT 0 MENU TITLE Ubuntu MAAS TIMEOUT 200 TOTALTIMEOUT 6000 ONTIMEOUT local LABEL centos5.8-net kernel /images/centos5.8-net/vmlinuz MENU LABEL centos5.8-net append initrd=/images/centos5.8-net/initrd.img ip=192.168.1.163 netmask=255.255.255.0 hostname=client101 gateway=192.168.1.1 ksdevice=eth0 dns=8.8.8.8 ks=http://192.168.1.125/cblr/svc/op/ks/profile/centos5.8-net MENU end and here is my kickstart file: # Kickstart file for a very basic Centos 5.8 system # Assigns the server ip: 192.211.48.163 # DNS 8.8.8.8, 8.8.4.4 # London TZ install url --url http://mirror.centos.org/centos-5/5.8/os/i386 lang en_US.UTF-8 keyboard us network --device=eth0 --bootproto=static --ip=192.168.1.163 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=8.8.8.8,8.8.4.4 --hostname=client1-server --onboot=on rootpw --iscrypted $1$Snrd2bB6$CuD/07AX2r/lHgVTPZyAz/ firewall --enabled --port=22:tcp authconfig --enableshadow --enablemd5 selinux --enforcing timezone --utc Europe/London bootloader --location=mbr --driveorder=xvda --append="console=xvc0" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work part /boot --fstype ext3 --size=100 --ondisk=xvda part pv.2 --size=0 --grow --ondisk=xvda volgroup VolGroup00 --pesize=32768 pv.2 logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=528 --grow --maxsize=1056 logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow %packages @base @core @dialup @editors @text-internet keyutils iscsi-initiator-utils trousers bridge-utils fipscheck device-mapper-multipath sgpio emacs Here is my dhcp file: ddns-update-style interim; allow booting; allow bootp; ignore client-updates; set vendorclass = option vendor-class-identifier; subnet 192.168.1.0 netmask 255.255.255.0 { host tower { hardware ethernet 50:E5:49:18:D5:C6; fixed-address 192.168.1.163; option routers 192.168.1.1; option domain-name-servers 8.8.8.8,8.8.4.4; option subnet-mask 255.255.255.0; filename "/pxelinux.0"; default-lease-time 21600; max-lease-time 43200; next-server 192.168.1.125; } } Is it impossible to prevent it asking for a dynamic ip before trying to install from the net? Perhaps there is an error in of my files? My dhcp server is set to ignore client-updates, and is set to only works with one mac address whilst testing.

    Read the article

  • Nginx + Wordpress Multisite 3.4.2 + subdirectories + static pages and permalinks

    - by UrkoM
    I am trying to setup Wordpress Multisite, using subdirectories, with Nginx, php5-fpm, APC, and Batcache. As many other people, I am getting stuck in the rewrite rules for permalinks. I have followed these two guides, which seem to be as official as you can get: http://evansolomon.me/notes/faster-wordpress-multisite-nginx-batcache/ http://codex.wordpress.org/Nginx#WordPress_Multisite_Subdirectory_rules It is partially working: http://blog.ssis.edu.vn works. http://blog.ssis.edu.vn/umasse/ works. But other permalinks, like these two to a post or to a static page, don't work: http://blog.ssis.edu.vn/umasse/2008/12/12/hello-world-2/ http://blog.ssis.edu.vn/umasse/sample-page/ They either take you to a 404 error, or to some other blog! Here is my configuration: server { listen 80 default_server; server_name blog.ssis.edu.vn; root /var/www; access_log /var/log/nginx/blog-access.log; error_log /var/log/nginx/blog-error.log; location / { index index.php; try_files $uri $uri/ /index.php?$args; } # Add trailing slash to */wp-admin requests. rewrite /wp-admin$ $scheme://$host$uri/ permanent; # Add trailing slash to */username requests rewrite ^/[_0-9a-zA-Z-]+$ $scheme://$host$uri/ permanent; # Directives to send expires headers and turn off 404 error logging. location ~* \.(js|css|png|jpg|jpeg|gif|ico)$ { expires 24h; log_not_found off; } # this prevents hidden files (beginning with a period) from being served location ~ /\. { access_log off; log_not_found off; deny all; } # Pass uploaded files to wp-includes/ms-files.php. rewrite /files/$ /index.php last; if ($uri !~ wp-content/plugins) { rewrite /files/(.+)$ /wp-includes/ms-files.php?file=$1 last; } # Rewrite multisite '.../wp-.*' and '.../*.php'. if (!-e $request_filename) { rewrite ^/[_0-9a-zA-Z-]+(/wp-.*) $1 last; rewrite ^/[_0-9a-zA-Z-]+.*(/wp-admin/.*\.php)$ $1 last; rewrite ^/[_0-9a-zA-Z-]+(/.*\.php)$ $1 last; } location ~ \.php$ { # Forbid PHP on upload dirs if ($uri ~ "uploads") { return 403; } client_max_body_size 25M; try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include /etc/nginx/fastcgi_params; } } Any ideas are welcome! Have I done something wrong? I have disabled Batcache to see if it makes any difference, but still no go.

    Read the article

  • Should certain math classes be required for a Computer Science degree?

    - by sunpech
    For a Computer Science (CS) degree at many colleges and universities, certain math courses are required: Calculus, Linear Algebra, and Discrete Mathematics are few examples. However, since I've started working in the real world as a software developer, I have yet to truly use some the knowledge I had at once acquired from taking those classes. Discrete Math might be the only exception. My questions: Should these math classes be required to obtain a computer science degree? Or would they be better served as electives? I'm challenging even that the certain math classes even help with required CS classes. For example, I never used linear algebra outside of the math class itself. I hear it's used in Computer Graphics, but I never took those classes-- yet linear algebra was required for a CS degree. I personally think it could be better served as an elective rather than requirement because it's more specific to a branch of CS rather than general CS. From a Slashdot post CS Profs Debate Role of Math In CS Education: 'For too long, we have taught computer science as an academic discipline (as though all of our students will go on to get PhDs and then become CS faculty members) even though for most of us, our students are overwhelmingly seeking careers in which they apply computer science.'

    Read the article

  • What can Haskell's type system do that Java's can't?

    - by Matt Fenwick
    I was talking to a friend about the differences between the type systems of Haskell and Java. He asked me what Haskell's could do that Java's couldn't, and I realized that I didn't know. After thinking for a while, I came up with a very short list of minor differences. Not being heavy into type theory, I'm left wondering whether they're formally equivalent. To try and keep this from becoming a subjective question, I'm asking: what are the major, non-syntactical differences between their type systems? I realize some things are easier/harder in one than in the other, and I'm not interested in talking about those. And to make it more specific, let's ignore Haskell type extensions since there's so many out there that do all kinds of crazy/cool stuff.

    Read the article

  • What can Haskell's type system do that Java's can't and vice versa?

    - by Matt Fenwick
    I was talking to a friend about the differences between the type systems of Haskell and Java. He asked me what Haskell's could do that Java's couldn't, and I realized that I didn't know. After thinking for a while, I came up with a very short list of minor differences. Not being heavy into type theory, I'm left wondering whether they're formally equivalent. To try and keep this from becoming a subjective question, I'm asking: what are the major, non-syntactical differences between their type systems? I realize some things are easier/harder in one than in the other, and I'm not interested in talking about those. And to make it more specific, let's ignore Haskell type extensions since there's so many out there that do all kinds of crazy/cool stuff.

    Read the article

  • Do employers hiring for Software jobs care about the classes you took in CS masters program?

    - by Joey Green
    I'm torn between two classes right now for next semester( Software Design and Advanced Computer Graphics ). I would enjoy Advanced Computer Graphics more, but I feel the software design class would help me when approaching anything I ever build for the rest of my career. I feel though I could just buy the book( I already have both books actually ) of the Software Design class and go through it, if I wanted. But think it would be a bit tougher to pick up the Advanced Computer Graphics class on my own. So do employers look at the graduate classes you've taken to decide if you would be a good fit or not? I think more importantly what I'm wanting to know is if I wanted to work for a high-end software company like Apple or Google would a company like that be more impressed by someone that took software engineering classes or hardcore CS classes?

    Read the article

  • Type checking and recursive types (Writing the Y combinator in Haskell/Ocaml)

    - by beta
    When explaining the Y combinator in the context of Haskell, it's usually noted that the straight-forward implementation won't type-check in Haskell because of its recursive type. For example, from Rosettacode [1]: The obvious definition of the Y combinator in Haskell canot be used because it contains an infinite recursive type (a = a -> b). Defining a data type (Mu) allows this recursion to be broken. newtype Mu a = Roll { unroll :: Mu a -> a } fix :: (a -> a) -> a fix = \f -> (\x -> f (unroll x x)) $ Roll (\x -> f (unroll x x)) And indeed, the “obvious” definition does not type check: ?> let fix f g = (\x -> \a -> f (x x) a) (\x -> \a -> f (x x) a) g <interactive>:10:33: Occurs check: cannot construct the infinite type: t2 = t2 -> t0 -> t1 Expected type: t2 -> t0 -> t1 Actual type: (t2 -> t0 -> t1) -> t0 -> t1 In the first argument of `x', namely `x' In the first argument of `f', namely `(x x)' In the expression: f (x x) a <interactive>:10:57: Occurs check: cannot construct the infinite type: t2 = t2 -> t0 -> t1 In the first argument of `x', namely `x' In the first argument of `f', namely `(x x)' In the expression: f (x x) a (0.01 secs, 1033328 bytes) The same limitation exists in Ocaml: utop # let fix f g = (fun x a -> f (x x) a) (fun x a -> f (x x) a) g;; Error: This expression has type 'a -> 'b but an expression was expected of type 'a The type variable 'a occurs inside 'a -> 'b However, in Ocaml, one can allow recursive types by passing in the -rectypes switch: -rectypes Allow arbitrary recursive types during type-checking. By default, only recursive types where the recursion goes through an object type are supported. By using -rectypes, everything works: utop # let fix f g = (fun x a -> f (x x) a) (fun x a -> f (x x) a) g;; val fix : (('a -> 'b) -> 'a -> 'b) -> 'a -> 'b = <fun> utop # let fact_improver partial n = if n = 0 then 1 else n*partial (n-1);; val fact_improver : (int -> int) -> int -> int = <fun> utop # (fix fact_improver) 5;; - : int = 120 Being curious about type systems and type inference, this raises some questions I'm still not able to answer. First, how does the type checker come up with the type t2 = t2 -> t0 -> t1? Having come up with that type, I guess the problem is that the type (t2) refers to itself on the right side? Second, and perhaps most interesting, what is the reason for the Haskell/Ocaml type systems to disallow this? I guess there is a good reason since Ocaml also will not allow it by default even if it can deal with recursive types if given the -rectypes switch. If these are really big topics, I'd appreciate pointers to relevant literature. [1] http://rosettacode.org/wiki/Y_combinator#Haskell

    Read the article

< Previous Page | 50 51 52 53 54 55 56 57 58 59 60 61  | Next Page >