Search Results

Search found 14797 results on 592 pages for 'gui testing'.

Page 540/592 | < Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >

• Blocking access to websites with objective-C / root privileges in objective-C

  - by kvaruni

  I am writing a program in Objective-C (XCode 3.2, on Snow Leopard) that is capable of either selectively blocking certain sites for a duration or only allow certain sites (and thus block all others) for a duration. The reasoning behind this program is rather simple. I tend to get distracted when I have full internet access, but I do need internet access during my working hours to get to a number of work-related websites. Clearly, this is not a permanent block, but only helps me to focus whenever I find myself wandering a bit too much. At the moment, I am using a Unix script that is called via AppleScript to obtain Administrator permissions. It then activates a number of ipfw rules and clears those after a specific duration to restore full internet access. Simple and effective, but since I am running as a standard user, it gets cumbersome to enter my administrator password each and every time I want to go "offline". Furthermore, this is a great opportunity to learn to work with XCode and Objective-C. At the moment, everything works as expected, minus the actual blocking. I can add a number of sites in a list, specify whether or not I want to block or allow these websites and I can "start" the blocking by specifying a time until which I want to stay "offline". However, I find it hard to obtain clear information on how I can run a privileged Unix command from Objective-C. Ideally, I would like to be able to store information with respect to the Administrator account into the Keychain to use these later on, so that I can simply move into "offline" mode with the convenience of clicking a button. Even more ideally, there might be some class in Objective-C with which I can block access to some/all websites for this particular user without needing to rely on privileged Unix commands. A third possibility is in starting this program with root permissions and the reducing the permissions until I need them, but since this is a GUI application that is nested in the menu bar of OS X, the results are rather awkward and getting it to run each and every time with root permission is no easy task. Anyone who can offer me some pointers or advice? Please, no security-warnings, I am fully aware that what I want to do is a potential security threat.

  Read the article

• How to solve "The ChannelDispatcher is unable to open its IChannelListener" error?

  - by kyrisu

  Hi, I'm trying to communicate between WCF hosted in Windows Service and my service GUI. The problem is when I'm trying to execute OperationContract method I'm getting "The ChannelDispatcher at 'net.tcp://localhost:7771/MyService' with contract(s) '"IContract"' is unable to open its IChannelListener." My app.conf looks like that: <configuration> <system.serviceModel> <bindings> <netTcpBinding> <binding name="netTcpBinding"> <security> <transport protectionLevel="EncryptAndSign" /> </security> </binding> </netTcpBinding> </bindings> <behaviors> <serviceBehaviors> <behavior name="MyServiceBehavior"> <serviceMetadata httpGetEnabled="true" httpGetUrl="http://localhost:7772/MyService" /> <serviceDebug includeExceptionDetailInFaults="true" /> </behavior> </serviceBehaviors> </behaviors> <services> <service behaviorConfiguration="MyServiceBehavior" name="MyService.Service"> <endpoint address="net.tcp://localhost:7771/MyService" binding="netTcpBinding" bindingConfiguration="netTcpBinding" name="netTcp" contract="MyService.IContract" /> </service> </services> </system.serviceModel> Port 7771 is listening (checked using netstat) and svcutil is able to generate configs for me. Any suggestions would be appreciated. Stack trace from exception Server stack trace: at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter) at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message) There's one inner exeption (but not under Exeption.InnerExeption but under Exeption.Detail.InnerExeption - ToString() method doesn't show that) A registration already exists for URI 'net.tcp://localhost:7771/MyService'. But my service have specified this URI only in app.config file nowhere else. In entire solution this URI apears in server once and client once.

  Read the article

• MinGW/G++/g95 link problem - libf95 undefined reference to `MAIN_'

  - by pivakaka

  Hi folks, Summing up, my problem consists on compiling g95 objects inside a C++ application. Actually, I'm constructing an interface for an old fortran program. For this task, I'm using the wxWidgets GUI library, and calling fortran subroutines when necessary. At the beginning, I was developing the entire project compiling my fortran files with gfortran (which comes with GCC) and linking them with my app by the g++ -o... command. Everything was working fine but some numbers values calculated by my fotran subroutines returned NAN values. Doing some research, I realized that compiling my fortran files with gfortran with the -m32 flag, generates this NAN values problem. Although compiling with -m64 flag, my code works properly well. The only trouble here is that my App should be 32bits and then I tryed another compiller. Here I found g95 Fortran compiler, which compiles my fortran code and gives the right output on a 32bits environment. But when I'm trying to link these g95 objects into my program I see this following error: g++ -oCyclonTechTower.exe src\fortran\Modulo_Global.o src\fortran\Prop_Fisicas.o src\fortran\inversa.o src\fortran\tower.o src\fortran\PredadeCarga.o src\fortran\gota.o src\fortran\tadi.o src\view\SimulationORSATCustomDialog.o src\view\SimulationChildGUIFrame.o src\view\ParentGUIFrame.o src\view\ClientGUIFrame.o src\model\TowerData.o src\controller\SimulationController.o src\THEIACyclonTechTower.o ..\Resource\resource.o -Lc:\wxWidgets-2.6.4\lib -Lc:\MinGW\lib\gcc-lib\i686-pc-mingw32\4.1.2 -Bdynamic -Wl,--subsystem,windows -mwindows c:\wxWidgets-2.6.4\lib\libwx_mswu-2.6.a -lwxregexu-2.6 -lwxexpat-2.6 -lwxtiff-2.6 -lwxjpeg-2.6 -lwxpng-2.6 -lwxzlib-2.6 -lrpcrt4 -loleaut32 -lole32 -luuid -lwinspool -lwinmm -lshell32 -lcomctl32 -lcomdlg32 -lctl3d32 -ladvapi32 -lwsock32 -lgdi32 -lgcc -lf95 c:\MinGW\lib\gcc-lib\i686-pc-mingw32\4.1.2/libf95.a(main.o):(.text+0x32): undefined reference to `MAIN_' collect2: ld returned 1 exit status Build error occurred, build is stopped Time consumed: 1531 ms. I have already read the g95 Manual for integration with C++ and I'm actually calling these functions bellow for controlling the fortran environment: void g95_runtime_start(int argc, char *argv[]); void g95_runtime_stop(); I also included the g95 Fortran Runtime Library libf95.a and the libgcc.a into my linker command. Finishing, I don't have a main method implemented because this is managed by wxWidgets, and my fortran subroutines can not have a main function because this is a C++ program calling fortran functions. Can some of you guys help me with this problem? How can I fix this undefined reference to MAIN__ problem? Any idea will be much appreciated. Thanks in advance, George

  Read the article

• Cross-table linq query with EF4/POCO

  - by Basiclife

  Hi All, I'm new to EF(any version) and POCO. I'm trying to use POCO entities with a generic repository in a "code-first" mode(?) I've got some POCO Entities (no proxies, no lazy loading, nothing). I have a repository(of T as Entity) which provides me with basic get/getsingle/getfirst functionality which takes a lambda as a parameter (specifically a System.Func(Of T, Boolean)) Now as I'm returning the simplest possible POCO object, none of the relationship parameters work once they've been retrieved from the database (as I would expect). However, I had assumed (wrongly) that my lambda query passed to the repository would be able to use the links between entities as it would be executed against the DB before the simple POCO entities are generated. The flow is: GUI calls: Public Function GetAllTypesForCategory(ByVal CategoryID As Guid) As IEnumerable(Of ItemType) Return ItemTypeRepository.Get(Function(x) x.Category.ID = CategoryID) End Function Get is defined in Repository(of T as Entity): Public Function [Get](ByVal Query As System.Func(Of T, Boolean)) As IEnumerable(Of T) Implements Interfaces.IRepository(Of T).Get Return ObjectSet.Where(Query).ToList() End Function The code doesn't error when this method is called but does when I try to use the result set. (This seems to be a lazy loading behaviour so I tried adding the .ToList() to force eager loading - no difference) I'm using unity/IOC to wire it all up but I believe that's irrelevant to the issue I'm having NB: Relationships between entities are being configured properly and if I turn on proxies/lazy loading/etc... this all just works. I'm intentionally leaving all that turned off as some calls to the BL will be from a website but some will be via WCF - So I want the simplest possible objects. Also, I don't want a change in an object passed to the UI to be committed to the DB if another BL method calls Commit() Can someone please either point out how to make this work or explain why it's not possible? All I want to do is make sure the lambda I pass in is performed against the DB before the results are returned Many thanks. In case it matters, the container is being populated with everything as shown below: Container.AddNewExtension(Of EFRepositoryExtension)() Container.Configure(Of IEFRepositoryExtension)(). WithConnection(ConnectionString). WithContextLifetime(New HttpContextLifetimeManager(Of IObjectContext)()). ConfigureEntity(New CategoryConfig(), "Categories"). ConfigureEntity(New ItemConfig()). ... )

  Read the article

• WebClient error when using a thread in .NET

  - by Kiranu

  I'm having a very weird error using the WebClient class in .NET 4. The app simply downloads some files off the internet and provides output on a textbox (the GUI is WPF). The method that does this is the following: void DownloadFiles(object files) { fileL = (List<string>) files; foreach (string url in fileL) { byte[] data; using (System.Net.WebClient k = new WebClient()) { data = k.DownloadData(url); } //Bunch of irrelevant code goes here... } } (I added the using while trying to divine [yes I'm that desperate/ignorant] a solution, the problem happens even if the webclient is declared and initialized outside the foreach loop) Now the problem appears only when I'm executing this method on a thread separate from the WPF UI main thread. If it is executed on the UI thread then it works perfectly. When a new thread is created with: Thread t = new Thread(DownloadFiles); t.Start(files); The first time the code goes into the loop it will work, but when its the second pass inside the loop, I will always receive a TargetParameterCountException. I can't make any sense of this error. Any help is very much appreciated. EDIT Here are the Exception Details: Exception.Message = "Parameter count mismatch." Exception.InnerException = null Exception.Source = " mscorlib" The StackTrace follows: at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Delegate.DynamicInvokeImpl(Object[] args) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.Run() at System.Windows.Application.RunDispatcher(Object ignore) at System.Windows.Application.RunInternal(Window window) at System.Windows.Application.Run(Window window) at System.Windows.Application.Run() at FileDownloader.App.Main() in d:\mis documentos\visual studio 2010\Projects\OneMangaDownloader\FileDownloader\obj\x86\Debug\App.g.cs:line 0 at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart()

  Read the article

• WebClient error when using a thread in .NET 4

  - by Kiranu

  I'm having a very weird error using the WebClient class in .NET 4. The app simply downloads some files off the internet and provides output on a textbox (the GUI is WPF). The method that does this is the following: void DownloadFiles(object files) { fileL = (List<string>) files; foreach (string url in fileL) { byte[] data; using (System.Net.WebClient k = new WebClient()) { data = k.DownloadData(url); } //Bunch of irrelevant code goes here... } } (I added the using while trying to divine [yes I'm that desperate/ignorant] a solution, the problem happens even if the webclient is declared and initialized outside the foreach loop) Now the problem appears only when I'm executing this method on a thread separate from the WPF UI main thread. If it is executed on the UI thread then it works perfectly. When a new thread is created with: Thread t = new Thread(DownloadFiles); t.Start(files); The first time the code goes into the loop it will work, but when its the second pass inside the loop, I will always receive a TargetParameterCountException. I can't make any sense of this error. Any help is very much appreciated. EDIT Here are the Exception Details: Exception.Message = "Parameter count mismatch." Exception.InnerException = null Exception.Source = " mscorlib" The StackTrace follows: at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Delegate.DynamicInvokeImpl(Object[] args) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.DispatcherOperation.InvokeImpl() at System.Windows.Threading.DispatcherOperation.InvokeInSecurityContext(Object state) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Threading.DispatcherOperation.Invoke() at System.Windows.Threading.Dispatcher.ProcessQueue() at System.Windows.Threading.Dispatcher.WndProcHook(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndWrapper.WndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam, Boolean& handled) at MS.Win32.HwndSubclass.DispatcherCallbackOperation(Object o) at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs) at MS.Internal.Threading.ExceptionFilterHelper.TryCatchWhen(Object source, Delegate method, Object args, Int32 numArgs, Delegate catchHandler) at System.Windows.Threading.Dispatcher.InvokeImpl(DispatcherPriority priority, TimeSpan timeout, Delegate method, Object args, Int32 numArgs) at MS.Win32.HwndSubclass.SubclassWndProc(IntPtr hwnd, Int32 msg, IntPtr wParam, IntPtr lParam) at MS.Win32.UnsafeNativeMethods.DispatchMessage(MSG& msg) at System.Windows.Threading.Dispatcher.PushFrameImpl(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.PushFrame(DispatcherFrame frame) at System.Windows.Threading.Dispatcher.Run() at System.Windows.Application.RunDispatcher(Object ignore) at System.Windows.Application.RunInternal(Window window) at System.Windows.Application.Run(Window window) at System.Windows.Application.Run() at FileDownloader.App.Main() in d:\mis documentos\visual studio 2010\Projects\OneMangaDownloader\FileDownloader\obj\x86\Debug\App.g.cs:line 0 at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args) at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args) at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly() at System.Threading.ThreadHelper.ThreadStart_Context(Object state) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Threading.ThreadHelper.ThreadStart()

  Read the article

• What IDE to use for Python

  - by husayt

  As a Python newbie, it is interesting to know what IDE's ("GUIs/editors") others use for Python coding. If you can just give the name (e.g. Textpad, Eclipse ..) that will be enough. If it is already mentioned, you can just vote for it. But if you can also give some more comparative information, that will be much appreciated. Thanks. Update: Results so far PyDev with Eclipse (CP, F, AC, PD, EM, SI, MLS, UML, SC, UT, LN, CF, BM) Komodo (CP, C/F, MLS, PD, AC, SC, SI, BM, LN, CF, CT) Emacs (CP, F, AC, MLS, PD, EM, SC, SI, BM, LN, CF, CT, UT, UML) Vim (CP, F, AC, MLS, SI, BM, LN, CF ) TextMate (Mac, CT, CF, MLS, SI, BM, LN) Gedit (Linux, F, AC, MLS, BM, LN, CT [sort of]) Idle (CP, F, AC) PIDA (Linux, CP, F, AC, MLS, SI, BM, LN, CF)(VIM Based) NotePad++ (Windows) BlueFish (Linux) JEdit (CP, F, BM, LN, CF, MLS) E-Texteditor (TextMate Clone for Windows) WingIde (CP, C, AC, MLS (support for C), PD, EM, SC, SI, BM, LN, CF, CT, UT) Eric Ide (CP, F, AC, PD, EM, SI, LN, CF, UT) Pyscripter (Windows, F, AC, PD, EM, SI, LN, CT, UT) ConTEXT (Windows, C) SPE (F, AC, UML) SciTE (CP, F, MLS, EM, BM, LN, CF, CT, SH) Zeus (W, C, BM, LN, CF, SI, SC, CT) NetBeans (CP, F, PD, UML, AC, MLS, SC, SI, BM, LN, CF, CT, UT, RAD) DABO (CP) BlackAdder (C, CP, CF, SI) PythonWin (W, F, AC, PD, SI, BM, CF) Geany (CP, F, very limited AC, MLS, SI, BM, LN, CF) UliPad (CP, F, AC, PD, MLS, SI, LI, CT, UT, BM) Boa Constructor (CP, F, AC, PD, EM, SI, BM, LN, UML, CF, CT) ScriptDev (W, C, AC, MLS, PD, EM, SI, BM, LN, CF, CT) Spider (CP, F, AC) Editra (CP, F, AC, MLS, SC, SI, BM, LN, CF) Pfaide (Windows, C, AC, MLS, SI, BM, LN, CF, CT) KDevelop (CP, F, MLS, SC, SI, BM, LN, CF) Acronyms used: CP - Cross Platfom C - Commercial F - Free AC - Automatic Code-completion MLS - Multi-Language Support PD - Integrated Python Debugging EM - ErrorMarkup SC - Source Control integration SI - Smart Indent BM - Bracket Matching LN - Line Numbering UML - UML editing / viewing CF - Code Folding CT - Code Templates UT - Unit Testing UID - Gui Designer (e.g. QT, Eric, ..) DB - integrated database support RAD - Rapid app development support I don't mention basics like Syntax highlighting as I expect these by default. This is a just dry list reflecting your feedback and comments, I am not advocating any of these tools. I will keep updating this list as you keep posting your answers. PS. Can you help me to add features of the above editors to the list (like autocomplete, debugging, or etc)?

  Read the article

• Make Bluetooth on Android 2.1 discoverable indefinitely

  - by kanov-baekonfat

  Hello all. I'm working on a research project which involves Bluetooth and the Android OS. I need to make Bluetooth discoverable indefinitely in order for the project to continue. The Problem: Android limits discoverability to 300 seconds. I cannot ask the user every 300 seconds to turn discoverability back on as my application is designed to run in the background without disturbing the user. As far as I am aware, there is no way to increase the time though Android's GUI. Some sources have called this a safety feature, others have called this a bug. There may be a bit of truth in both... What I'm Trying / Have Tried: I'm trying to edit a stable release of cyanogenmod to turn the discoverability timer off (it's possible; there's a configuration file that needs to have a single number changed). This isn't working because I'm having verification problems with the resulting package. During the past week, I downloaded the cyanogenmod source code, changed a relevant class in the hope that it would make Bluetooth discoverable indefinitely, and tried to recompile. This did not work because (a) the repo is frequently changed, leading to an unstable code base which fails to compile (OR, it could be that I'm using it incorrectly; just because it looked like it was the code's fault in many instances doesn't mean I should blame it for all the problems I encountered!) and (b) the repo decides to periodically "ignore" me (but not always, as I have gotten the code base before!), replying to my synchronization/connection attempts with: fatal: The remote end hung up unexpectedly As you might imagine, the above two issues are problematic and very frustrating to deal with. More Info: I'm running Android 2.1 via cyanogenmod (v5 I believe). This means the phone is also rooted. I have a developer phone, which means that the bootloader is unlocked. My phone is an HTC Magic (32B). The Big Question: How can I make Bluetooth indefinitely discoverable on Android? Thanks for your time and input. I feel like I'm spinning my tires on this issue and I'd like to move past it.

  Read the article

• AutoScaleMode problems with changed default font

  - by Doc Brown

  Hi, I have some problems with the Form.AutoScaleMode property together with fixed size controls, when using a non-default font. I boiled it down to a simple test application (WinForms 2.0) with only one form, some fixed size controls and the following properties: class Form1 : Form { // ... private void InitializeComponent() { // ... this.AutoScaleDimensions = new System.Drawing.SizeF(96F, 96F); this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Dpi; this.Font = new System.Drawing.Font("Tahoma", 9.25F); // ... } } Under 96dpi, Windows XP, the form looks correctly like this 96 dpi example. Under 120 dpi, Windows XP, the the Windows Forms autoscaling feature produces this 120 dpi example. As you can see, groupboxes, buttons, list or tree views are scaled correctly, multiline text boxes get too big in the vertical axis, and a fixed size label does not scale correctly in both vertical and horizontal direction. Seems to be bug in the .NET framework? Using the default font (Microsoft Sans Serif 8.25pt), this problem does not occur. Using AutoScaleMode=Font (with adequate AutoScaleDimensions, of course) either does not scale at all or scales exactly like seen above, depending on when the Font is set (before or after the change of AutoScaleMode). The problem is not specific to the "Tahoma" Font, it occurs also with Microsoft Sans Serif, 9.25pt. And yes, i already read this SO post http://stackoverflow.com/questions/2114857/high-dpi-problems but it does not really help me. Any suggestions how to come around this? EDIT: I changed my image hoster, hope this one works better. EDIT2: Some additional information about my intention: I have about 50 already working fixed size dialogs with several hundreds of properly placed, fixed size controls. They were migrated from an older C++ GUI framework to C#/Winforms, that's why they are all fixed-size. All of them look fine with 96 dpi using a 9.25pt font. Under the old framework, scaling to 120 dpi worked fine - all fixed size controls scaled equal in both dimensions. Last week, we detected this strange scaling behaviour under WinForms when switching to 120 dpi. You can imagine that most of our dialogs now look very bad under 120 dpi. We are looking for a solution that avoids a complete redesign all those dialogs.

  Read the article

• File Folder copy

  - by Dario Dias

  Below is the VBScript code. If the file/s or folder exist I get scripting error, "File already exists". How to fix that? How to create folder only if it does not exist and copy files only that are new or do not exist in source path? How to insert the username (Point 1) after "Welcome" and at (Poin 3) instead of user cancelled? Can the buttons be changed to Copy,Update,Cancel instead of Yes,No,Cancel? (Point 2) The code: Set objFSO = CreateObject("Scripting.FileSystemObject") Set wshShell = WScript.CreateObject( "WScript.Shell" ) strUserName = wshShell.ExpandEnvironmentStrings( "%USERNAME%" ) Message = " Welcome to the AVG Update Module" & vbCR '1* Message = Message & " *****************************" & vbCR & vbCR Message = Message & " Click Yes to Copy Definition Files" & vbCR & vbCR Message = Message & " OR " & vbCR & vbCR Message = Message & " Click No to Update Definition Files." & vbCR & vbCR Message = Message & " Click Cancel (ESC) to Exit." & vbCR & vbCR X = MsgBox(Message, vbYesNoCancel, "AVG Update Module") '2* 'Yes Selected Script If X = 6 then objFSO.FolderExists("E:\Updates") if TRUE then objFSO.CreateFolder ("E:\Updates") objFSO.CopyFile "c:\Docume~1\alluse~1\applic~1\avg8\update\download\*.*", "E:\Updates\" , OverwriteFiles MsgBox "Files Copied Succesfully.", vbInformation, "Copy Success" End If 'No Selected Script If X = 7 then objFSO.FolderExists("Updates") if TRUE then objFSO.CreateFolder("Updates") objFSO.CopyFile "E:\Updates\*.*", "Updates", OverwriteFiles Message = "Files Updated Successfully." & vbCR & vbCR Message = Message & "Click OK to Launch AVG GUI." & vbCR & vbCR Message = Message & "Click Cancel (ESC) to Exit." & vbCR & vbCR Y = MsgBox(Message, vbOKCancel, "Update Success") If Y = 1 then Set WshShell = CreateObject("WScript.Shell") WshShell.Run chr(34) & "C:\Progra~1\avg\avg8\avgui.exe" & Chr(34), 0 Set WshShell = Nothing End if If Y = 3 then WScript.Quit End IF 'Cancel Selection Script If X = 2 then MsgBox "No Files have been Copied/Updated.", vbExclamation, "User Cancelled" '3* End if

  Read the article

• Rendering HTML in Java

  - by ferronrsmith

  I am trying to create a help panel for an application I am working on. The help file as already been created using html technology and I would like it to be rendered in a pane and shown. All the code I have seen shows how to render a site e.g. "http://google.com". I want to render a file from my pc e.g. "file://c:\tutorial.html" This is the code i have, but it doesn't seem to be working. import javax.swing.JEditorPane; import javax.swing.JFrame; import javax.swing.JLabel; import javax.swing.JScrollPane; import javax.swing.SwingUtilities; import java.awt.Color; import java.awt.Container; import java.io.IOException; import static java.lang.System.err; import static java.lang.System.out; final class TestHTMLRendering { // ------------------------------ CONSTANTS ------------------------------ /** * height of frame in pixels */ private static final int height = 1000; /** * width of frame in pixels */ private static final int width = 1000; private static final String RELEASE_DATE = "2007-10-04"; /** * title for frame */ private static final String TITLE_STRING = "HTML Rendering"; /** * URL of page we want to display */ private static final String URL = "file://C:\\print.html"; /** * program version */ private static final String VERSION_STRING = "1.0"; // --------------------------- main() method --------------------------- /** * Debugging harness for a JFrame * * @param args command line arguments are ignored. */ @SuppressWarnings( { "UnusedParameters" } ) public static void main( String args[] ) { // Invoke the run method on the Swing event dispatch thread // Sun now recommends you call ALL your GUI methods on the Swing // event thread, even the initial setup. // Could also use invokeAndWait and catch exceptions SwingUtilities.invokeLater( new Runnable() { /** * } fire up a JFrame on the Swing thread */ public void run() { out.println( "Starting" ); final JFrame jframe = new JFrame( TITLE_STRING + " " + VERSION_STRING ); Container contentPane = jframe.getContentPane(); jframe.setSize( width, height ); contentPane.setBackground( Color.YELLOW ); contentPane.setForeground( Color.BLUE ); jframe.setDefaultCloseOperation( JFrame.EXIT_ON_CLOSE ); try { out.println( "acquiring URL" ); JEditorPane jep = new JEditorPane( URL ); out.println( "URL acquired" ); JScrollPane jsp = new JScrollPane( jep, JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED, JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED ); contentPane.add( jsp ); } catch ( IOException e ) { err.println( "can't find URL" ); contentPane.add( new JLabel( "can't find URL" ) ); } jframe.validate(); jframe.setVisible( true ); // Shows page, with HTML comments erroneously displayed. // The links are not clickable. } } ); }// end main }// end TestHTMLRendering

  Read the article

• PyQt threads and signals - how to properly retrieve values

  - by Cawas

  Using Python 2.5 and PyQt, I couldn't find any question this specific in Python, so sorry if I'm repeating the other Qt referenced questions below, but I couldn't easily understand that C code. I've got two classes, a GUI and a thread, and I'm trying to get return values from the thread. I've used the link in here as base to write my code, which is working just fine. To sum it up and illustrate the question in code here (I don't think this code will run on itself): class MainWindow (QtGui.QWidget): # this is just a reference and not really relevant to the question def __init__ (self, parent = None): QtGui.QWidget.__init__(self, parent) self.thread = Worker() # this does not begin a thread - look at "Worker.run" for mor details self.connect(self.thread, QtCore.SIGNAL('finished()'), self.unfreezeUi) self.connect(self.thread, QtCore.SIGNAL('terminated()'), self.unfreezeUi) self.connect(self.buttonDaemon, QtCore.SIGNAL('clicked()'), self.pressDaemon) # the problem begins below: I'm not using signals, or queue, or whatever, while I believe I should def pressDaemon (self): self.buttonDaemon.setEnabled(False) if self.thread.isDaemonRunning(): self.thread.setDaemonStopSignal(True) self.buttonDaemon.setText('Daemon - converts every %s sec'% args['daemonInterval']) else: self.buttonConvert.setEnabled(False) self.thread.startDaemon() self.buttonDaemon.setText('Stop Daemon') self.buttonDaemon.setEnabled(True) # this whole class is just another reference class Worker (QtCore.QThread): daemonIsRunning = False daemonStopSignal = False daemonCurrentDelay = 0 def isDaemonRunning (self): return self.daemonIsRunning def setDaemonStopSignal (self, bool): self.daemonStopSignal = bool def __init__ (self, parent = None): QtCore.QThread.__init__(self, parent) self.exiting = False self.thread_to_run = None # which def will be running def __del__ (self): self.exiting = True self.thread_to_run = None self.wait() def run (self): if self.thread_to_run != None: self.thread_to_run(mode='continue') def startDaemon (self, mode = 'run'): if mode == 'run': self.thread_to_run = self.startDaemon # I'd love to be able to just pass this as an argument on start() below return self.start() # this will begin the thread # this is where the thread actually begins self.daemonIsRunning = True self.daemonStopSignal = False sleepStep = 0.1 # don't know how to interrupt while sleeping - so the less sleepStep, the faster StopSignal will work # begins the daemon in an "infinite" loop while self.daemonStopSignal == False and not self.exiting: # here, do any kind of daemon service delay = 0 while self.daemonStopSignal == False and not self.exiting and delay < args['daemonInterval']: time.sleep(sleepStep) # delay is actually set by while, but this holds for N second delay += sleepStep # daemon stopped, reseting everything self.daemonIsRunning = False self.emit(QtCore.SIGNAL('terminated')) Tho it's quite big, I hope this is pretty clear. The main point is on def pressDaemon. Specifically all 3 self.thread calls. The last one, self.thread.startDaemon() is just fine, and exactly as the example. I doubt that represents any issue. The problem is being able to set the Daemon Stop Signal and retrieve the value if it's running. I'm not sure that it's possible to set a stop signal on QtCore.QtThread, because I've tried doing the same way and it didn't work. But I'm pretty sure it's not possible to retrieve a return result from the emit. So, there it is. I'm using direct calls to the thread class, and I'm almost positive that's not a good design and will probably fail when running under stress. I read about that queue, but I'm not sure it's the proper solution here, or if I should be using Qt at all, since this is Python. And just maybe there's nothing wrong with the way I'm doing.

  Read the article

• Winform radiobutton data binding

  - by Rajarshi

  I am following the "Presentation Model" design pattern suggested by Martin Fowler for my GUI architecture in a Windows Forms project. "The essence of a Presentation Model is of a fully self-contained class that represents all the data and behavior of the UI window, but without any of the controls used to render that UI on the screen. A view then simply projects the state of the presentation model onto the glass...." - Martin Fowler Read more about this pattern at www.martinfowler.com/eaaDev/PresentationModel.html I am finding the concept very fluid and easy to understand except this one issue of data binding RadioButtons to properties on the Data/Domain object. Suposing I have a Windows Form with 3 radio buttons to depict some "Mode" options as - Auto Manual Import How can I use boolean properties on Data/Domain Objects to DataBind to these buttons? I have tried many ways but to no avail. For example I would like to code like - rbtnAutoMode.DataBindings.Add("Text", myBusinessObject, "IsAutoMode"); rbtnManualMode.DataBindings.Add("Text", myBusinessObject, "IsManualMode"); rbtnImportMode.DataBindings.Add("Text", myBusinessObject, "IsImportMode"); There should be a fourth property like "SelectedMode" on the data/domain object which at the end should depict a single value like "SelectedMode = Auto". I am trying to update this property when any of the "IsAutoMode", "IsManualMode" or "IsImportMode" is changed, e.g. through the property setters. I have INotifyPropertyChanged implemented on my data/domain object so, updating any data/domain object property automatically updates my UI controls, that's not an issue. There is a good example of binding 2 radio buttons here - http://stackoverflow.com/questions/344964/how-do-i-use-databinding-with-windows-forms-radio-buttons but I am missing the link while implementing the same with 3 buttons. I am having very erratic behaviors for the Radio Buttons. I hope I was able to explain reasonably. I am actually in a hurry and could not put a detailed code on post, but any help in this regard is appreciated. There is a simple solution to this issue by exposing a method like - public void SetMode(Modes mode) { this._selectedMode = mode; } which could be called from the "CheckedChanged" event of the Radio Buttons from the UI and would perfectly set the "SelectedMode" on the business object, but I need to stretch the limits to verify whether this can be done by DataBinding.

  Read the article

• Merging two XML files into one XML file using Java

  - by dmurali

  I am stuck with how to proceed with combining two different XML files(which has the same structure). When I was doing some research on it, people say that XML parsers like DOM or StAX will have to be used. But cant I do it with the regular IOStream? I am currently trying to do with the help of IOStream but this is not solving my purpose, its being more complex. For example, What I have tried is; public class GUI { public static void main(String[] args) throws Exception { // Creates file to write to Writer output = null; output = new BufferedWriter(new FileWriter("C:\\merged.xml")); String newline = System.getProperty("line.separator"); output.write(""); // Read in xml file 1 FileInputStream in = new FileInputStream("C:\\1.xml"); BufferedReader br = new BufferedReader(new InputStreamReader(in)); String strLine; while ((strLine = br.readLine()) != null) { if (strLine.contains("<MemoryDump>")){ strLine = strLine.replace("<MemoryDump>", "xmlns:xsi"); } if (strLine.contains("</MemoryDump>")){ strLine = strLine.replace("</MemoryDump>", "xmlns:xsd"); } output.write(newline); output.write(strLine); System.out.println(strLine); } // Read in xml file 2 FileInputStream in = new FileInputStream("C:\\2.xml"); BufferedReader br1 = new BufferedReader(new InputStreamReader(in)); String strLine1; while ((strLine1 = br1.readLine()) != null) { if (strLine1.contains("<MemoryDump>")){ strLine1 = strLine1.replace("<MemoryDump>", ""); } if (strLine1.contains("</MemoryDump>")){ strLine1 = strLine1.replace("</MemoryDump>", ""); } output.write(newline); output.write(strLine1); I request you to kindly let me know how do I proceed with merging two XML files by adding additional content as well. It would be great if you could provide me some example links as well..! Thank You in Advance..! System.out.println(strLine1); } }

  Read the article

• How to integrate Purify into Hudson CI?

  - by Martin

  Hello everybody! I have a Hudson CI system set up and for the moment it is used for building a project and running some unit tests. My next step is to integrate the memory leak detector Purify into the build cycle. Now I want to start the unit tests also inside purify and for this I have created a new batch task which runs following command: purify.exe /SaveTextData MyExecutable.exe --test TestLibrary.dll --output xml As I read in the Purify documentation the /SaveTextData option is used in order to run purify not in GUI mode. If I run this command on my local workstation in the command line it works perfectly. But in case it is started by Hudson, nothing happens. Unfortunetly there are no logs of purify... Has someone ever tried to start purify either by Hudson or any other CI system? Thanks in advance. Best regards Martin EDIT: I forgot to tell you, that I have Hudson running as master and slave on different computers. On the master I have configured a task which should start the unit tests within purify on the slave. I am running the slave via JNLP. EDIT 18.03.2010: Ok, so finally I am a bit closer the source of the problem. I have discovered, that running my unit tests in purify locally the log file EngineCmdLine.log contains three commands. I am starting purify with following command: purify.exe /SaveTextData TestRunnerConsoleWD.exe --test TestDemoWD.dll Output of EngineCmdLine.log when starting purify manually: File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestRunnerConsoleWD.exe File: C:\WINDOWS\system32\ws2_32.dll File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestDemoWD.dll Output when starting via Hudson: File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestRunnerConsoleWD.exe File: C:\WINDOWS\system32\ws2_32.dll File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestDemoWD.dll File: D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestDemoWD.dll The error output of purify: Instrumenting: BtcTestDemoWD.dll 313856 bytes Purify: While processing file D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TESTFWWD.DLL: Error: Cannot replace file c:\Programme\IBM\RationalPurifyPlus\PurifyPlus\cache\BTCTESTFWWD$Purify_D_workspace_hudson_workspace_Purify_TestFW_CommonsCoreTest_Cpp_msvs9.DLL. Is it in use? TESTFWWD.DLL 505344 bytes Unable to instrument D:\workspace\hudson\workspace\Purify_TestFW_CommonsCoreTest_Cpp_msvs9\TestDemoWD.dll (0x1) Question is, why is purify starting twice a command with the TestDemoWD.dll library?

  Read the article

• WPF / Silverlight Binding when setting DataTemplate programically

  - by Daniel

  I have my little designer tool (my program). On the left side I have TreeView and on the right site I have Accordion. When I select a node I want to dynamically build Accordion Items based on Properties from DataContext of selected node. Selecting nodes works fine, and when I use this sample code for testing it works also. XAML code: <layoutToolkit:Accordion x:Name="accPanel" SelectionMode="ZeroOrMore" SelectionSequence="Simultaneous"> <layoutToolkit:AccordionItem Header="Controller Info"> <StackPanel Orientation="Horizontal" DataContext="{Binding}"> <TextBlock Text="Content:" /> <TextBlock Text="{Binding Path=Name}" /> </StackPanel> </layoutToolkit:AccordionItem> </layoutToolkit:Accordion> C# code: private void treeSceneNode_SelectedItemChanged(object sender, RoutedPropertyChangedEventArgs<object> e) { if (e.NewValue != e.OldValue) { if (e.NewValue is SceneNode) { accPanel.DataContext = e.NewValue; //e.NewValue is a class that contains Name property } } } But the problem occurs when I'm trying to achive this using DateTemplate and dynamically build AccordingItem, the Binding is not working: <layoutToolkit:Accordion x:Name="accPanel" SelectionMode="ZeroOrMore" SelectionSequence="Simultaneous" /> and DataTemplate in my ResourceDictionary <DataTemplate x:Key="dtSceneNodeContent"> <StackPanel Orientation="Horizontal" DataContext="{Binding}"> <TextBlock Text="Content:" /> <TextBlock Text="{Binding Path=Name}" /> </StackPanel> </DataTemplate> and C# code: private void treeSceneNode_SelectedItemChanged(object sender, RoutedPropertyChangedEventArgs<object> e) { if (e.NewValue != e.OldValue) { ResourceDictionary rd = new ResourceDictionary(); rd.Source = new Uri("/SilverGL.GUI;component/SilverGLDesignerResourceDictionary.xaml", UriKind.RelativeOrAbsolute); if (e.NewValue is SceneNode) { accPanel.DataContext = e.NewValue; AccordionItem accController = new AccordionItem(); accController.Header = "Controller Info"; accController.ContentTemplate = rd["dtSceneNodeContent"] as DataTemplate; accPanel.Items.Add(accController); } else { // Other type of node } } } I really need help with this issue. Thanks for any support.

  Read the article

• Java - How to make a set of JInternalFrame independant of each other?

  - by Amokrane

  Hello, I'm programming a short Paint program like and I'm trying to make an MDI architecture for it. To make that happen, I used JInternalFrame inside a JDesktopPane. Although I kind of obtain multiple frames, there are not really working properly. Basically, if I have 2 JInternalFrame I can draw only on the last one. The other one seems to be disabled. Here is a short video illustrating the problem. http://bit.ly/9ydiwM Here are some part of the code. Panneau.java public class Panneau extends JDesktopPane { /** La liste de fenêtres ouvertes */ private static ArrayList<Cadre> cadres; /** Le pannel comportant la liste des formes à dessiner*/ private Pannel pannel; /** La barre d'outils */ private ToolBox toolBox; public Panneau() { this.setLayout(new BorderLayout()); // Initialisations des listes de cadres cadres = new ArrayList<Cadre>(); // En haut ToolBox toolBox = new ToolBox(); this.add(toolBox, BorderLayout.NORTH); **// Intialisation de la première internal frame Cadre cadre = new Cadre(); this.add(cadre, BorderLayout.CENTER);** cadres.add(cadre); // Ajout du pannel à gauche pannel = new Pannel(); this.add(pannel, BorderLayout.WEST); } /** * Crée une nouvelle fenêtre de dessin * */ **public void createNewInternalFrame() { Cadre cadre = new Cadre(); this.add(cadre, BorderLayout.CENTER); cadres.add(cadre); }** } public class Cadre extends JInternalFrame { /** Largeur par d'une fenêtre interne */ private int width; /** Hauteur d'une fenêtre interne */ private int height; /** Titre d'une fenêtre interne */ private String title; /** Toile associée à la fenêtre interne */ private Toile toile; public Cadre() { width = 400; height = 400; title = "Form"; toile = new Toile(); this.setTitle(title); this.setSize(width, height); this.setEnabled(true); this.setResizable(true); this.setAutoscrolls(true); this.setClosable(true); this.setIconifiable(true); this.setDoubleBuffered(true); this.setContentPane(toile); this.setVisible(true); this.pack(); } } Basically, Panneau is the main Window that contains all the differents parts of the GUI. I can create as much JInternalFrame that I want, using : Panneau.createNewInternalFrame(). Toile is basically where I draw my shapes. Any idea ? Thanks

  Read the article

• Absolute reRendering using RichFaces

  - by wheelie

  Hey there, I am implementing copy/paste functionality for a complex object tree, this means you can copy an object and paste it where the object type is the same. Therefore I need to reRender the <a4j:commandLink>-s which are performing the paste action (so it will show on the GUI or not). Simplified example: Problem is that copy links are deep in the tree. How is it possible to reRender on a higher level in the component tree? (very)Simplified example: ... <h:form id="form1"> ... <a4j:commandLink value="Copy" reRender=":paste1, :paste2, :paste3" /> <a4j:commandLink id="paste1" value="Paste" rendered="#{myBean.myHashMap.key}" /> <a4j:outputPanel> <a4j:region renderRegionOnly="true"> <a4j:commandLink value="Copy" reRender=":paste1, :paste2, :paste3" /> <a4j:commandLink id="paste2" value="Paste" rendered="#{myBean.myHashMap.key}" /> </a4j:region> <a4j:outputPanel> <a4j:region renderRegionOnly="true"> <a4j:commandLink value="Copy" reRender=":paste1, :paste2, :paste3" /> <a4j:commandLink id="paste3" value="Paste" rendered="#{myBean.myHashMap.key}" /> </a4j:region> </a4j:outputPanel> </a4j:outputPanel> ... </h:form> Something like that. In practise this differs in that a rich:tree is displayed. Also, there can be multiple instances of the same paste link: object:0::paste3, object:1::paste3. private final String pasteIDs = ":xxPaste, ... , :xyPaste"; According to the RichFaces reference, putting the separator to the beginning of the ID means it is an "absolute" search expression, however this way i get the same result: only the 'local' paste link gets rerendered, the others not. Every copy-paste link pair is encapsulated in <a4j:region renderRegionOnly="true">, because it is necessary for other components to restrict the reRender to that region. Could this be blocking the reRender I want to make? Also I want to rerender exactly those paste links, so no other rerender action is triggered. Hope it is clear what i want to achieve. Any help would be appreciated! Daniel

  Read the article

• R Install/Update on Mac OS X (Snow Leopard): where does R put files during install/config?

  - by doug

  In sum, there's a stray preference-like file or two (probably just one) that i can't find. Here's the whole story: I recently attempted to update my R install from 2.10 to 2.11. As i have done before, i installed from source. I know that all of the dependencies are correctly installed and made available to R, because my prior install worked fine. When i upgraded to 2.11, i am unable to install packages (no exception thrown, it just doesn't appear to complete the install and is unresponsive so i have to quit + restart R. Given i install from source, there are any number of points in the process that i could have messed up. What i need to do now is "start over" which requires that i clear out my my prior install. I am having trouble doing that. There is still at least one preference file or something like that i can't find and one of these is causing the problem, so i need to find it and terminate it with extreme prejudice before i do a fresh install. Although i set a number of flags during the install, i have never opted out of the default install locations during the config step. There has to be one or more preference files still in my file structure (and that's also accessible to the new install of R) because after i follow all of the steps below, then do a fresh install, when i start R for the first time, some of my preferences have persisted (e.g., quartz settings, GUI background color, editor selection, etc.). Again, the problem is that i just cannot locate those files. Finally, the problem can't be that during my last install from source, i inadvertently caused a preference file to be sent to an off-spec location--because again, a fresh R install (whether from source or from the OS X binaries) is finding those files Here's what i've done prior to attempting a clean install of R: Removed files from these locations: ~/.RData ~/.RHistory /Applications/R64.app /Applications/R.app /Library/Frameworks/R.framework (i also removed all symlinks from these) Cleared all RAM and disk caches, in particular the directory where i know R caches: ~/Library/Caches/R* (in fact i've cleared this entire directory) Checked for all 'hidden' files in the OS X directories where login/startup files are often placed: /etc/ ~/ In addition, i've checked R-help, and i've also read through the relevant portions of 'R Installation and Administration'--no luck. I've also searched searched my file structure using the various bash utilities, which nearly always solves problems of this sort quite easily, but in this case obviously searching by name or even pattern is more problematic.

  Read the article

• How to run an application as root without asking for an admin password?

  - by kvaruni

  I am writing a program in Objective-C (XCode 3.2, on Snow Leopard) that is capable of either selectively blocking certain sites for a duration or only allow certain sites (and thus block all others) for a duration. The reasoning behind this program is rather simple. I tend to get distracted when I have full internet access, but I do need internet access during my working hours to get to a number of work-related websites. Clearly, this is not a permanent block, but only helps me to focus whenever I find myself wandering a bit too much. At the moment, I am using a Unix script that is called via AppleScript to obtain Administrator permissions. It then activates a number of ipfw rules and clears those after a specific duration to restore full internet access. Simple and effective, but since I am running as a standard user, it gets cumbersome to enter my administrator password each and every time I want to go "offline". Furthermore, this is a great opportunity to learn to work with XCode and Objective-C. At the moment, everything works as expected, minus the actual blocking. I can add a number of sites in a list, specify whether or not I want to block or allow these websites and I can "start" the blocking by specifying a time until which I want to stay "offline". However, I find it hard to obtain clear information on how I can run a privileged Unix command from Objective-C. Ideally, I would like to be able to store information with respect to the Administrator account into the Keychain to use these later on, so that I can simply move into "offline" mode with the convenience of clicking a button. Even more ideally, there might be some class in Objective-C with which I can block access to some/all websites for this particular user without needing to rely on privileged Unix commands. A third possibility is in starting this program with root permissions and the reducing the permissions until I need them, but since this is a GUI application that is nested in the menu bar of OS X, the results are rather awkward and getting it to run each and every time with root permission is no easy task. Anyone who can offer me some pointers or advice? Please, no security-warnings, I am fully aware that what I want to do is a potential security threat.

  Read the article

• Unable to add SSH pub key for GitHub

  - by Kaushik

  I am trying to set up a new GitHub account as part of learning ruby on rails. My OS is windows. I am having the following problem while trying to add my public key to the GitHub SSH public keys. When I put the key in the text area, supply a name, and click 'Add Key', I am taken to the Job profile page without any confirmation that the key has been added.(I am using SSH client GUI to generate RSA keys). When I come back to the SSH public keys page, I see that the key is not there. I tried this multiple times...without any result. Just as a test, I tried to ssh to the GitHub account using 'ssh -v [email protected]' and here is the verbose output: OpenSSH_4.6p1, OpenSSL 0.9.8e 23 Feb 2007 debug1: Connecting to github.com [207.97.227.239] port 22. debug1: Connection established. debug1: identity file /c/Users/Administrator/.ssh/identity type -1 debug1: identity file /c/Users/Administrator/.ssh/id_rsa type -1 debug1: identity file /c/Users/Administrator/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.1p1 Debian-5github2 debug1: match: OpenSSH_5.1p1 Debian-5github2 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_4.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-cbc hmac-md5 none debug1: kex: client->server aes128-cbc hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'github.com' is known and matches the RSA host key. debug1: Found key in /c/Users/Administrator/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: /c/Users/Administrator/.ssh/identity debug1: Trying private key: /c/Users/Administrator/.ssh/id_rsa debug1: Trying private key: /c/Users/Administrator/.ssh/id_dsa debug1: No more authentication methods to try. Permission denied (publickey). Also, why is it looking for the keys in c/Users/Administrator/.ssh/ Is there a possibility of changing this default location? EDIT: With Mozila, I get error msg: Oops! The key has already been taken. The key is invalid. It must begin with 'ssh-rsa' or 'ssh-dss'. My key looks like: ---- BEGIN SSH2 PUBLIC KEY ---- Comment: "[2048-bit rsa, Administrator@Kaushik-THINK, Sun Jan 02 2011 \ 02:40:03]" AAAAB3NzaC1yc2EAAAADAQABAAABAQDoA5xqJozKmAHTGh9hgmagsFOl2hdPzS8ZPV9Ta1 xU0JiUnHef38Rvz/5oqL1wW7SjmZbc/+tCPOfU1lg3UisFXajJhek2bjJ2qsKd4Sjax2Nj ZMYD7djPb8rokUYSKW3bdYyJHtJH+murz04UGdCcZ8HqkMTzqlh3zAIK7SIlCy+mtAi5A/ sm0JbqlNGHB6YrL1aWIcOSolIx2HWt8cWhlK77guT9dPgd0HT59Gn0uhO7UWGLrNdJut0x ian3HdvNYMUXoO/SkNlxvWRgZ1UOhaB+qf4hw5RCGcBbqP3fM4LKpurHZx4wEpgmM0e4EM +2PYdf46uxChNdBl7J5sZF ---- END SSH2 PUBLIC KEY ---- I still can't see the key..so not sure how it says it is already taken.

  Read the article

• Is this a situation where Qt Model/View architecture is not useful?

  - by csmithmaui

  Hi, I am writing a GUI based application where I read a string of values from serial port every few seconds and I need to display most of the values in some type graphical indicator(I was thinking of QprogressBar maybe) that displays the range and the value. Some of the other data that I am parsing from the string are the date and fault codes. Also, the data is hierarchical. I wanted to use the model/view architecture of Qt because I have been interested in MVC stuff for a while but have never quite wrapped my brain around how to implement it very well. As of now, I have subclassed QAbstractItemModel and in the model I read the serial port and wrap the items parsed from the string in a Tree data structure. I can view all of the data in a QtreeView with no issues. I have also began to subclass QAbstractItemView to build my custom view with all of the Graphical Indicators and such. This is where I am getting stuck. It seems to me that in order for me to design a view that knows how to display my custom model the view needs to know exactly how all of the data in the model is organized. Doesn't that defeat the purpose of Model/View? The QTreeView I tested the model with is basically just displaying the model as it is setup in the Tree structure but I don't want to do that because the data is not all of the same type. Is the type of data or the way you would like to present it to the user a determining factor in whether or not you should use this architecture? I always assumed it was just always better to design in an MVC style. It seems to me like it might have been better to just subclass QWidget and then read in from the serial port and update all of subwidgets(graphical indicators, labels, etc...) from the subclass. Essentially, do everything in one class. Does anybody understand this issue that can explain to me either what I am missing or why I shouldn't be doing it this way. As of now I am a little confused. Thanks so much for any help!

  Read the article

• How to delegate SwingWorker's publish to other methods

  - by Savvas Dalkitsis

  My "problem" can be described by the following. Assume we have an intensive process that we want to have running in the background and have it update a Swing JProgress bar. The solution is easy: import java.util.List; import javax.swing.JOptionPane; import javax.swing.JProgressBar; import javax.swing.SwingWorker; /** * @author Savvas Dalkitsis */ public class Test { public static void main(String[] args) { final JProgressBar progressBar = new JProgressBar(0,99); SwingWorker<Void, Integer> w = new SwingWorker<Void, Integer>(){ @Override protected void process(List<Integer> chunks) { progressBar.setValue(chunks.get(chunks.size()-1)); } @Override protected Void doInBackground() throws Exception { for (int i=0;i<100;i++) { publish(i); Thread.sleep(300); } return null; } }; w.execute(); JOptionPane.showOptionDialog(null, new Object[] { "Process", progressBar }, "Process", JOptionPane.OK_CANCEL_OPTION, JOptionPane.QUESTION_MESSAGE, null, null, null); } } Now assume that i have various methods that take a long time. For instance we have a method that downloads a file from a server. Or another that uploads to a server. Or anything really. What is the proper way of delegating the publish method to those methods so that they can update the GUI appropriately? What i have found so far is this (assume that the method "aMethod" resides in some other package for instance): import java.awt.event.ActionEvent; import java.util.List; import javax.swing.AbstractAction; import javax.swing.Action; import javax.swing.JOptionPane; import javax.swing.JProgressBar; import javax.swing.SwingWorker; /** * @author Savvas Dalkitsis */ public class Test { public static void main(String[] args) { final JProgressBar progressBar = new JProgressBar(0,99); SwingWorker<Void, Integer> w = new SwingWorker<Void, Integer>(){ @Override protected void process(List<Integer> chunks) { progressBar.setValue(chunks.get(chunks.size()-1)); } @SuppressWarnings("serial") @Override protected Void doInBackground() throws Exception { aMethod(new AbstractAction() { @Override public void actionPerformed(ActionEvent e) { publish((Integer)getValue("progress")); } }); return null; } }; w.execute(); JOptionPane.showOptionDialog(null, new Object[] { "Process", progressBar }, "Process", JOptionPane.OK_CANCEL_OPTION, JOptionPane.QUESTION_MESSAGE, null, null, null); } public static void aMethod (Action action) { for (int i=0;i<100;i++) { action.putValue("progress", i); action.actionPerformed(null); try { Thread.sleep(300); } catch (InterruptedException e) { e.printStackTrace(); } } } } It works but i know it lacks something. Any thoughts?

  Read the article

• Android calculator with button click

  - by rynwtts

  I am trying to calculate a field named lblAnswer by adding values txtA + txtB. I am fairly new to the android development world and would like to know what is the best way of going about this. I have already added the necessarily edit fields to the GUI. I am now working in the java file to try and create the method. This method has been named doCalc. Here is what I have thus far. public void doCalc() { lblAnswer = txtA + txtB; } It has been suggested that I add more code here is the full code. Thank you for that suggestion. Here is the Java File. package com.example.wattsprofessional; import android.app.Activity; import android.os.Bundle; import android.view.Menu; public class MainActivity extends Activity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); } @Override public boolean onCreateOptionsMenu(Menu menu) { // Inflate the menu; this adds items to the action bar if it is present. getMenuInflater().inflate(R.menu.activity_main, menu); return true; } public void doCalc() { lblAnswer = txtA + txtB; Double.parseDouble(txtA.getText().toString()); lblAnswer.setText"t } and here is the xml file. <RelativeLayout xmlns:android="http://schemas.android.com/apk/res/android" xmlns:tools="http://schemas.android.com/tools" android:layout_width="match_parent" android:layout_height="match_parent" tools:context=".MainActivity" > <EditText android:id="@+id/txtA" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignParentTop="true" android:layout_centerHorizontal="true" android:layout_marginTop="40dp" android:ems="10" android:hint="Write Here" android:inputType="numberDecimal" > <requestFocus /> </EditText> <EditText android:id="@+id/txtB" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_alignLeft="@+id/txtA" android:layout_below="@+id/txtA" android:layout_marginTop="32dp" android:ems="10" android:hint="Second Here" android:inputType="numberDecimal" /> <Button android:id="@+id/button1" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_centerHorizontal="true" android:layout_centerVertical="true" android:text="@string/calculate" android:onClick="doCalc"/> <TextView android:id="@+id/lblAnswer" android:layout_width="wrap_content" android:layout_height="wrap_content" android:layout_below="@+id/button1" android:layout_centerHorizontal="true" android:layout_marginTop="50dp" android:text="TextView" /> </RelativeLayout>

  Read the article

• compiling opencv 2.4 on a 64 bit mac in Xcode

  - by Walt

  I have an opencv project that I've been developing under ubuntu 12.04, on a parellels VM on a mac which has an x86_64 architecture. There have been many screen switching performance issues that I believe are due to the VM, where linux video modes flip around for a couple seconds while camera access is made by the opencv application. I decided to moved the project into Xcode on the mac side of the computer to continue the opencv development. However, I'm not that familiar with xcode and am having trouble getting the project to build correctly there. I have xcode installed. I downloaded and decompressed the latest version of opencv on the mac, and ran: ~/src/opencv/build/cmake-gui -G Xcode .. per the instructions from willowgarage and various other locations. This appeared to work fine (however I'm wondering now if I'm missing an architecture setting in here, although it is 64-bit intel in Xcode). I then setup an xcode project with the source files from the linux project and changed the include directories to use /opt/local/include/... rather than the /usr/local/include/... I switched xcode to use the LLVM GCC compiler in the build settings for the project then set the Apple LLVM Dialog for C++ to Language Dialect to GNU++11 (which seems possibly inconsistant with the line above) I'm not using a makefile in xcode, (that I'm aware of - it has its own project file...) I was also running into a linker issue that looked like they may be resolved with the addition of this linker flag: -lopencv_video based on a similar posting here: other thread however in that case the person was using a Makefile in their project. I've tried adding this linker flag under "Other Linker Flags" in xcode build settings but still get build errors. I think I may have two issues here, one with the architecture settings when building the opencv libraries with Cmake, and one with the linker flag settings in my project. Currently the build error list looks like this: Undefined symbols for architecture x86_64: "cv::_InputArray::_InputArray(cv::Mat const&)", referenced from: _main in main.o "cv::_OutputArray::_OutputArray(cv::Mat&)", referenced from: _main in main.o "cv::Mat::deallocate()", referenced from: cv::Mat::release() in main.o "cv::Mat::copySize(cv::Mat const&)", referenced from: cv::Mat::Mat(cv::Mat const&)in main.o cv::Mat::operator=(cv::Mat const&)in main.o "cv::Mat::Mat(_IplImage const*, bool)", referenced from: _main in main.o "cv::imread(std::basic_string<char, std::char_traits<char>, std::allocator<char> > const&, int)", referenced from: _main in main.o ---SNIP--- ld: symbol(s) not found for architecture x86_64 collect2: ld returned 1 exit status Can anyone provide some guidance on what to try next? Thanks, Walt

  Read the article

< Previous Page | 536 537 538 539 540 541 542 543 544 545 546 547  | Next Page >