Search Results

Search found 18677 results on 748 pages for 'current'.

Page 542/748 | < Previous Page | 538 539 540 541 542 543 544 545 546 547 548 549  | Next Page >

• Synchronize Dreamweaver over an SSH tunnel using an SFTP connection

  - by Aeo

  Maybe... Just maybe... I'm asking too much here. Maybe I'm even barking up the wrong tree. I'm looking to essentially have Dreamweaver establish an SSH tunnel to one machine, and then use that connection to synchronize a site that is on another machine entirely. Now for some details: We've got two connections here at work. We've got our office connection for day to day business, and then we've got some fancy connection hosting our web servers upstairs. For the most part they've been mutually exclusive until recently. We had been establishing an SFTP connection to synchronize our web sites by going out over the office connection to the web and coming back in over the fancy connection to our servers upstairs. Recently -ish, we established a LAN connection to one of our servers that makes a pleasant change in VNC connection quality. Thanks to Vinagre, this makes it really easy to connect to any of our servers over this LAN connection via SSH tunnel for VNC. However, in spite of that new addition of a LAN connection, we still synchronize over the 'net. Out the office connection and in on the fancy one upstairs. I'm looking to change this. I'd like to get Dreamweaver to first tunnel over our LAN connection to the servers, and then go from there to whatever connection it needs to. Am I asking too much? The current set up: Dreamweaver is installed on Windows XP which is running within VirtualBox on top of Ubuntu 10.10. The network connection for VirtualBox is currently made in NAT mode, but could easily be switched to a Bridged Connection should it need be. The LAN connection is to 1 of 5 servers running CentOS 5.

  Read the article

• Centos repository packages vs latest developer release

  - by fran

  I have started to run a personal server using CentOS and I have noticed that many packages that are available to install from repository are old compared with the latest release from the developer. I know that installing packages from repository is very easy and I guess that the supplied versions are stable and prepared to work without any trouble, but I still find odd having so much software that lags behind the current version. It's my first time with linux and I don't know what is the "normal" thing, should I stick to whatever version the repository supplies, or try to get the latest from the developer? To be more precisely, the repository supplies the apache httpd web server with version 2.2, I wanted to update to 2.4, so I started removing apache and its dependencies packages that come with centos to use the latest ones, but when I was about to remove pcre v6 to replace it with v8, i found out that 132 installed packages depend on it and probably it is not a good idea to remove it, so that made me think twice about getting the latest software instead of using the packages supplied by the official repositories. Should I leave things as they are instead of going on an upgrade rampage? Thanks

  Read the article

• Windows disk change monitoring for malware analysis

  - by SuperDuck

  Not sure if this question belongs to here, because it has some relations with 'serverfault' (system backups) and 'stackoverflow' (software analysis). I'm looking for a solution to monitor disk changes on a Windows system and selectively revert them. It should be able to handle live files like registry parts, so may need to be an offline backup software. It shouldn't silently pass over files which the current admin user doesn't have permissions on (files with no permission entries or owned by the 'system' user) Registry change tracking would be a bonus but is not a requirement I use virtual machines for malware analysis, there is even no solution to list file changes in disk snapshot files (delta VMDK). I currently use Ashampoo for monitoring changes. Though it's the best one between similars, it's not a good software and hasn't really evolved in many 'platinum', 'deluxe' versions released in the last 10 years (it even used non-resizable windows until the latest version). The real problem is it misses some disk / registry changes. Perhaps it only compares modification dates and doesn't catch a change if the dates are preserved. So, I think the solution should compare files using hashes, or file sizes at least. There are numerous backup software out there and I'm sure one can handle this, offline or online.

  Read the article

• Basic IPTables setup for OpenVPN/HTTP/HTTPS server

  - by Afronautica

  I'm trying to get a basic IPTables setup on my server which will allow HTTP/SSH access, as well as enable the use of the server as an OpenVPN tunnel. The following is my current rule setup - the problem is OpenVPN queries (port 1194) seemed to be getting dropped as a result of this ruleset. Pinging a website while logged into the VPN results in teh response: Request timeout for icmp_seq 1 92 bytes from 10.8.0.1: Destination Port Unreachable When I clear the IPTable rules pinging from the VPN works fine. Any ideas? iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE iptables -A INPUT -p tcp --dport 1194 -j ACCEPT iptables -A FORWARD -p tcp --dport 1194 -j ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -i ! lo -d 127.0.0.0/8 -j REJECT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A OUTPUT -j ACCEPT iptables -A INPUT -p tcp --dport 80 -j ACCEPT iptables -A INPUT -p tcp --dport 443 -j ACCEPT iptables -A INPUT -p tcp -m state --state NEW --dport 22 -j ACCEPT iptables -A INPUT -p icmp -m icmp --icmp-type 8 -j ACCEPT iptables -A INPUT -j REJECT iptables -A FORWARD -j REJECT

  Read the article

• Copy Database Wizard fails on creation of view into another not-yet-copied database

  - by user22037

  Update - I found that doing a manual detach/reattach using MSDN article "How to: Move a Database Using Detach and Attach (Transact-SQL)" got around this issue. I'll just be creating a script to dettach and reattach but do the file copies manually. Any info on how to overcome the problems with the wizard would be helpful in the future. I am in the process of moving around 20 databases from our current server to a new one. When performing the copies however I have found that some databases can not copy if they have views into other databases that have not yet been copied to the target system. The log file generated says "failed with the following error: "Invalid object name" in reference to the database in the view. If I first copy just the database referenced in the view and then in a separate step copy the database over containing the view it is successful. However some other database have views into each other so can't just adjust the order in which the copy occurs. Is there any way to ignore this error and just allow everything to copy?

  Read the article

• How can I install .NET framework 3.5 on XP machines without internet connection?

  - by EricSchaefer

  I want to install .NET framework 3.5 on a couple of machines that do not have internet access. If I install the "no internet access"-package it still wants to download something. How can I figure out what is missing? Are there other installation packages? Edit: I would present screenshots but I cannot upload anything from here and the shots would be in german. So I present only the text translated back to english... Installing the "full redistributable package": At the bottom of the license agreement page it display this text: Size of download file: 67 MB Appoximate download time: 2h 44min (56KBit/s) 18min (512KBit/s) It shows the text even if I installed Windows Installer 3.1. After agreeing it displays the "Download and Installation Status"-Dialog with a progress bar labeled "Download:" and Status: Connection to server attempted (try X of 5). Total Download Status: 56MB/67MB I tried it in a VM with no network connection. It tries 5 times while the progress bar shows progress. Later the progress bar is labeled "Installation:". Even later it reports problems during setup and provides two buttons "Send Report Later" and "Don't Send". Now here it comes: "Setup completed" and "Microsoft .NET Framework 3.5 has been deinstalled successfully." (Emphasis is mine) "It is recommended to install current service packs and security updates. More information at Windows Update (link)." Edit2: Installed Service Pack 3, but still no success.

  Read the article

• Cache Control Headers with IIS 7.5

  - by Brad

  I'm trying to wrap my head around client side (web browser) caching and how it works in relation to IIS 7.5 cache control headers. In particular: If we want to force clients to reload cached resources, how must IIS be configured? Do we need to set expire web content immediately if the resources on the server have a more recent Modified Date (or ETag value)? Right now we're not setting any cache headers. So if I set a cache header of no-cache (which I think is the equivalent of expire web content immediately) will that force the web browser to obtain a new version of a particular file. Or will the browser only request a new version after it deems its current copy to be stale and then from that point forward not cache it? Would a best practice be to set a cache control flag of 1 week, then 8 days before I know I am going to make a change set the cache control down to for instance 30 minutes? But if I do that and then need to immediately expire an item from users caches because there was an issue with it how do I do that?

  Read the article

• At what point does the performance gap between GPU & CPU become so great that the CPU is holding back a system?

  - by Matthew Galloway

  I know that generally speaking for gaming performance the GPU is the primary factor which holds back performance, with everything else such as RAM/motherboard/PSU/CPU being secondary in importance to the graphics card. But at some point the other components ARE going to be significant in holding back the whole system! For instance nobody would be silly enough to play modern games with 512MB RAM and the very latest graphics cards (such as an HD7970) as I bet the performance increase over such a system with only 512MB but a mid range card would be non-existent! Thus it would be a "waste" for such a person to buy any high end graphics card without resolving first the system's other problems. The same point applies to other components, such as if it only had a Pentium II a current high end graphics card would be wasted on it! So my core question is how do you determine at what point for your system is spending on extra GPU power be completely "wasted"? (also, a slightly more nuanced question is trying work out at what point might the extra graphics power not be "wasted" but would be "sub optimal" value for money, when the expenditure should then be split around graphics card and other components. As obviously a gamer shouldn't always just spend on upgrading the graphics card! But needs to balance it out)

  Read the article

• Advice for UPC/Surge Protector in home office

  - by Fred

  I'm just starting out as an independant developer, mostly Unix stuff with some Windows thrown in occasionally. I've been running two machines, a linux and a windows dev machine. Long story short, we had a bad storm come through last week and I unplugged one machine, forgot to unplug the other and the p/s and mobo ended up dead. Luckily I backup to an external service religiously (rsync.net for anyone interested), so there was no loss in data, but it did show me a glaring hole in my current setup, namely, lack of UPC and Surge Protection (this has honestly never been an issue before). Can anyone recommend a UPC/Surge Protector for a home office? It only needs to support a single machine (I opted to use vmware instead of rebuilding that machine), but it's a quad core Phenom 2 with a 1k watt p/s. This is outside my experience so I thought I'd get some input from others. I'm looking for something that's reasonably priced and does the job reasonably well. I don't need absolute 100% uptime, just something to protect my PC better than it is now.

  Read the article

• Deploying multiple identical copies of a virtual machine for compute tasks

  - by Reid

  I have a compute task which has a large number of library dependencies. I would like to deploy it on some of my company's large Linux clusters, where I do not have root. I could probably track down, compile, and install the right versions of all the libraries, but this looks to be quite tedious and would have to be repeated if I deployed it again somewhere else. On the other hand, it's pretty easy to install on current Ubuntu. This led me to wonder about a virtual machine approach. Could I put together a virtual machine which booted up, ran the computation (with parameters from and results to the host), and then shut down? In other words, I'd like a command like this that I could run on the host: $ ./run-vm --ram N --task /path/on/host/foo.sh --results /another/host/dir/ This would boot the VM, run foo.sh, and put the (relatively small) results of the computation in /another/host/dir/. It's important to start up many instances of the VM simultaneously, both on a single node and multiple nodes of the cluster. So it would be nice if I didn't have to make many copies of the VM virtual disk and metadata. As the task instances are completely independent, the VMs would not need any network support once deployed, or any outside communications beyond reading and writing the host filesystem. Is this possible, and if so, how might I go about doing it? Are there assumptions I've made above which are bogus?

  Read the article

• Outdoor WiFi Mesh Topology vs. Repeaters

  - by IronJaxor

  Here's the current configuration in our organization (which I believe is incorrect): We have a number of Cisco 1500 series AP's (22 in total), that are mounted outdoors to provide seamless WiFi coverage over a large area. Each AP however has its own physical ethernet connection back to the WLC (All the AP's are marked as Root AP's). They are all broadcasting the same SSID. We have tried to stagger the channel selection but because there are only three non-overlapping channels to choose from, and in some areas the density of AP's is quite high, there is multiple places of channel interference. With this configuration we experience 100-150 disconnects from clients every day. (Our clients are mobile so they move throughout the coverage area constantly). My idea is to switch the AP's to the same channel thereby forming a wireless mesh, use the built in functionality of the 1500 series to use 802.11a as the backhaul, designate one or two AP's as root AP's and wire them back to the WLC. Thereby forming a WiFi mesh, which if I'm not mistaken is the point of the 1500 series in the first place! I am however completely new at WiFi networks and wondering if I am simply mistaken in what I believe my proposed changes will enable, or if there is a better way to tackle the WiFi topology.

  Read the article

• How to boot XBMC 10.1 ISO on USB via grub?

  - by Shi

  I am trying to boot the XBMC Live image (http://xbmc.org/download/) as ISO from USB via grub 1.98. I have a Kubuntu 11.04 image there as well already and it works using the following configuration: menuentry "Kubuntu 11.04 64bit" { loopback loop /boot/iso/kubuntu-11.04-desktop-amd64.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/boot/iso/kubuntu-11.04-desktop-amd64.iso noeject noprompt initrd (loop)/casper/initrd.gz } However, if I try to boot XBMC in an analogue way, I always get an error "Unable to find a medium containing a live file system". I found different approaches to install XBMC, but they all are about installing the distribution on USB, or using grub4dos, or unetbootin. I already found out that XBMC 10.1 is based on Ubuntu 10.04.2 LTS, so I tried those settings - even though they are quite similar to Kubuntu 11.04. Finally, the ISO contains a grub configuration as well in boot/grub/grub.cfg, but even with those parameters, I get the error above. My current configuration is the following one: menuentry "xbmc 10.1" { loopback loop /boot/iso/xbmc-10.1-live.iso linux (loop)/live/vmlinuz video=vesafb boot=live iso-scan/filename=/boot/iso/xbmc-10.1-live.iso xbmc=autostart,nodiskmount splash quiet loglevel=0 persistent quickreboot quickusbmodules notimezone noaccessibility noapparmor noaptcdrom noautologin noxautologin noconsolekeyboard nofastboot nognomepanel nohosts nokpersonalizer nolanguageselector nolocales nonetworking nopowermanagement noprogramcrashes nojockey nosudo noupdatenotifier nouser nopolkitconf noxautoconfig noxscreensaver nopreseed union=aufs initrd (loop)/live/initrd.img } Any more ideas or any more information I should supply?

  Read the article

• Recover file from NTFS after it was formatted twice

  - by Phil

  I'm running Linux Mint and have a 2TB drive that I formatted as NTFS. I copied ~120GB of files from another computer to the 2TB drive, removing the files from the other computer as I did so. When they were all on the 2TB drive, I zipped them up as file "Gold.tar.gz". Then I reformatted the 2TB drive as ext3 in a moment of absolute stupidity. I formatted the 2TB back to NTFS, but of course everything is gone. Here is what I have tried: TestDisk -- won't find any lost partitions or undelete files, just the current empty one PhotoRec -- seems to only find some broken text files and misidentify their extensions. It never finds the 100's of avi files I had (before the 120GB copy, I already had 750GB on the drive full of avi files) or anything else that would show me it's working properly. Using dd I recovered the first 512MB of the drive and went hunting through it. I found all of the file as MFT entries, including the file "Gold.tar.gz" in a 2048 byte MFT record. I'm looking now for some way of either (1) telling PhotoRec to look at that record, or (2) analyze the MFT record myself and discover the sectors holding the data; I can piece it all together using dd and join the binary output if it's fragmented. One last thing - from the moment I got this drive a few days ago to the incident, there were only file copies made to it and no deletes. I formatted as NTFS, then copied thousands of files, then made a tar.gz, then reformatted to ext3, then reformatted to NTFS again. I'm hoping that the size of the drive and fact that there was no file modification/deleting happening makes for minimal file fragmentation.

  Read the article

• Internet setup for my office

  - by prakash

  We have two internet connections to our office and our current setup is like this.. The internet connections require pppoe log in so i take each cable and plug it into a wifi router and configure the router to log in to the pppoe and then plug in a cable from the router to a switch and distribute the internet throughout my office. The problem with this setup is it is really hard to monitor and im not able to monitor who is hogging internet usage and what he or she is actually using it for. apart from this we also have a nas setup which is routed through another switch . Could someone please throw a little light on how i can restructure this setup for easy monitoring and better transparency... ? each wan router is connected to a different switch and is distributed to users accordingly.. we have around 40 users in the office.. we want to setup a single linux box to which i want to connect the two wan connections and from there distribute it to all our users.... im looking for a solution where we do not have to invest more that buying a single pc and a couple of nics

  Read the article

• /etc/hosts: What is loghost? (fresh install of Solaris 10 update 9)

  - by cjavapro

  # # Internet host table # ::1 localhost 127.0.0.1 localhost XX.XX.XX.XX myserver loghost What is the purpose of loghost? If it was not for having loghost in there, all the /etc/hosts files on all the servers in this particular network could be identical. Edit: I looked at /etc/syslog.conf #ident "@(#)syslog.conf 1.5 98/12/14 SMI" /* SunOS 5.0 */ # # Copyright (c) 1991-1998 by Sun Microsystems, Inc. # All rights reserved. # # syslog configuration file. # # This file is processed by m4 so be careful to quote (`') names # that match m4 reserved words. Also, within ifdef's, arguments # containing commas must be quoted. # *.err;kern.notice;auth.notice /dev/sysmsg *.err;kern.debug;daemon.notice;mail.crit /var/adm/messages *.alert;kern.err;daemon.err operator *.alert root *.emerg * # if a non-loghost machine chooses to have authentication messages # sent to the loghost machine, un-comment out the following line: #auth.notice ifdef(`LOGHOST', /var/log/authlog, @loghost) mail.debug ifdef(`LOGHOST', /var/log/syslog, @loghost) # # non-loghost machines will use the following lines to cause "user" # log messages to be logged locally. # ifdef(`LOGHOST', , user.err /dev/sysmsg user.err /var/adm/messages user.alert `root, operator' user.emerg * ) Very interesting. when shutting down,, alerts go to all users probably through *.emerg * Looking at ifdef, it seems that the first parameter checks to see if current machine is a loghost, second parameter is what to do if it is and third parameter is what to do if it is not. Edit: If you want to test a logging rule you can use svcadm restart system-log to restart the logging service and then logger -p notice "test" to send a test log message where notice can be replaced with any type such as user.err, auth.notice, etc.

  Read the article

• Migrating from one linux install to another: How to keep the second disk around?

  - by Jim Miller

  I've got a linux box running Fedora 19 that I want to move to CentOS 6.4. Rather than trying to do something fancy with the current disk (which has also accumulated a lot of sludge over the years), I'm going to get a new disk, put CentOS on that, and then move the to-be-preserved bits of stuff from the old disk to the new one. I haven't done this yet, but I presume it should be semi-straightforward -- do the CentOS install on the new disk, mount the old disk on /olddisk or somesuch, and start copying. However, I'm not sure how to handle getting the machine to recognize the new empty disk as the target of the CentOS install (I suppose I can just pull the old disk during the installation), remember that this is the intended boot disk once the install has happened), and tweak /etc/fstab (right?) to set up the old disk on the desired mount point. (Both disks are, or will be, SATA.) I could probably hack it together without losing too much hair or doing too much damage, but could anyone offer some advice that would get/keep me on the right track? Thanks!

  Read the article

• High disk I/O activity in CentOS server

  - by triiim

  I have about 16 websites in a CentOS dedicated, and I am having some problems on high traffic hours, it seems to be a high disk I/O activity causing a general slowdown. I've installed atop and this is what I see on the bottom (the server has been restarted thats why the values are so low): *** system and process activity since boot *** PID RDDSK WRDSK WCANCL DSK CMD 1/18 2176 1.7G 7.3G 854.4M 39 mysqld 671 1248K 3.0G 0K 13 flush-8:0 566 0K 1.1G 0K 5 jbd2/sda2-8 2401 124.2M 529.1M 22408K 3 crond 2032 2.2G 502.0M 0K 12 nginx 2360 425.8M 115.3M 4188K 2 httpd flush-8:0 and jbd2/sda2-8 are the processes I see with iotop using 99% on the IO column, and they are the processes that write the most on the hdd (after mysql). From what I saw in google this could be caused by some ext4 related bug, the current kernel is: Linux srvr.com 2.6.32-71.29.1.el6.x86_64 #1 SMP Mon Jun 27 19:49:27 BST 2011 x86_64 x86_64 x86_64 GNU/Linux I asked the hosting support to update the kernel and they tried but they now say that the server wont boot with the new installed kernel and they had to go back to the previous, they are not helping very much. Does someone has any idea how could I solve the high disk usage caused by flush-8:0 and jbd2/sda2-8 processes?

  Read the article

• F2 in Paste mode

  - by dotancohen

  Vim has a terrific paste mode, in which abbreviations and mappings are ignored. Frustratingly, even keys that do not map to pastable ASCII characters, such as the function keys, are pasted literally. For instance the key F2 is pasted as <F2>. Is there anyway around this? Note that pastetoggle can in fact be mapped to a function key to easily leave paste mode, however the function that I am writing changes other values when entering or leaving paste mode (such as enabling or disabling line numbers and other things). Therefore I would really like to find a workaround. For reference, here is the current version of the function (that gets stuck in paste mode): iab if if<Space>(<Space>{{<Esc>kA<Left><Left><Left><Left><C-R>=Eatchar('\s')<CR> " Triple-toggle Insert Modes: coding, prose, and paste let g:insertModeGlobal=1 function! Te() if g:insertModeGlobal==3 " Was in paste insert mode, go to coding insert mode set nu set nopaste let g:insertModeGlobal=4 endif if g:insertModeGlobal==2 " Was in prose insert mode, go to paste insert mode set nolinebreak nnoremap j j nnoremap k k nnoremap gj gj nnoremap gk gk set relativenumber execute ":Signs" iab if if<Space>(<Space>{{<Esc>kA<Left><Left><Left><Left><C-R>=Eatchar('\s')<CR> set nonu set paste let g:insertModeGlobal=3 endif if g:insertModeGlobal==1 " Was in coding insert mode, go to prose insert mode set linebreak nnoremap j gj nnoremap k gk nnoremap gj j nnoremap gk k set number execute ":DisableSigns" iab if if let g:insertModeGlobal=2 endif if g:insertModeGlobal==4 let g:insertModeGlobal=1 endif endfunction

  Read the article

• 3 Monitor PCI-e Graphics card on Linux (without tremendous pain)?

  - by N Rahl

  As we are all painfully aware, the only way to get multiple monitors AND compositing (Compiz) on Linux is to use a single graphics card that can drive both (or in my case all three) screens. I bought a Radeon 5750 specifically because it claims to able to drive 3 monitors. I can plug in 3 monitors (2 DVI, 1 HDMI) and the Catalyst Control Center shows all 3, but only 2 can be enabled at a time. The exact message is: The current settings cannot be applied. Possible issues may include: - Display(s) cannot be enabled. - Setting(s) cannot be applied due to insufficient video memory. So I'm going to assume that either the 5750 doesn't support 3 monitors, OR, more likely, ATI couldn't be bothered to add that support to their Linux drivers. So this is a multipart question: First, can anyone suggest a PCI Express Graphics card that can run 3 screens on linux without tremendous pain? I'm looking for something where you install the driver and all three screens "just work". Does such a card exist? Second, if you have a 5750, have you been able to get it to do 3 monitors? I'm running Ubuntu 10.04 at the moment.

  Read the article

• In which order does Excel process its formulae?

  - by dwwilson66

  I've got a fairly large spreadsheet with major calculations going on, and it's starting to slow down every time a value that's part of a calculated field is modified. I'm in the process of optimizing the file, adding arrays where I can, and seeing where I can shave off a few milliseconds here and there. Let's say there's data in Columns A-H. Column H is set based on relationships between values in Columns A, B and C, which change dynamically from an outside program. Users enter the data in Column F. Formulas in D & E calculate relationships between F & H and H & D, respectively. How does Excel manage formulae in the case, for instance, where they're dependent on data further into the sheet? Will my value in H be available the first time that the formulae in D & E calculate? or, will D & E calculate based on an old value for H, because H's update hasn't happened yet? Are there any efficiencies to be gained by positioning dependencies in particular rows or columns in the speadsheet? Do positions above and left the current position get processed sooner than things below and to the right?

  Read the article

• How to optimize a postgreSQL server for a "write once, read many"-type infrastructure ?

  - by mhu

  Greetings, I am working on a piece of software that logs entries (and related tagging) in a PostgreSQL database for storage and retrieval. We never update any data once it has been inserted; we might remove it when the entry gets too old, but this is done at most once a day. Stored entries can be retrieved by users. The insertion of new entries can happen rather fast and regularly, thus the database will commonly hold several millions elements. The tables used are pretty simple : one table for ids, raw content and insertion date; and one table storing tags and their values associated to an id. User search mostly concern tags values, so SELECTs usually consist of JOIN queries on ids on the two tables. To sum it up : 2 tables Lots of INSERT no UPDATE some DELETE, once a day at most some user-generated SELECT with JOIN huge data set What would an optimal server configuration (software and hardware, I assume for example that RAID10 could help) be for my PostgreSQL server, given these requirements ? By optimal, I mean one that allows SELECT queries taking a reasonably little amount of time. I can provide more information about the current setup (like tables, indexes ...) if needed.

  Read the article

• Transferring domain from one registrar to another

  - by Macha

  I have a domain from my old web host, which was free with my hosting account. After a few years, I am moving to a VPS. Most of my other domains were registered with Namecheap, so it was just a matter of changing a few DNS records. However, given that my old host does not provide me with a DNS control panel, and I don't want to be paying a full hosting bill for just domains, I'm now looking into transferring it. My old host says there will be a charge of $15 to them. NameCheap's page seems to imply you don't need the current registrar to do anything, but it also seems to be based on sending an email to the one listed in whois. Of course, my old host have whoisguard on the domain so the only email on it is [email protected] (and not a unique [email protected], just [email protected]) which doesn't go to me. Again, there doesn't seem to be an option to disable this. So, is it a case of paying my old host's fee, and paying again for the domain from NameCheap, or is there some other way to transfer my domain? (I'm not really sure which of the trilogy sites this is best for.)

  Read the article

• Server-side SSH jump hosts

  - by Dan Sosedoff

  Trying to figure out server side SSH jump hosts logic. Current network schema: [Client] <--> [Server A: hostname: a.com] <--> [Server B] [Client] <--> [Server A: hostname: b.com] <--> [Server C] Server A responds to both DNS records. Possible flow: Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically jump user onto Server B with ssh user2@server_b.com. Client opens a ssh connection with ssh [email protected]. Server A accepts it and should automatically just user onto Server C with ssh user2@server_c.com. In other words, client should be able to connect to the target without performing any local configuration, assuming that we have a stock ssh config. The problem with ssh jumps is that user has to define hosts in local ~/.ssh/config file, which is not acceptable in my case. It needs to be a default sshd behavior. Im aware that you can define a custom command ~/.ssh/authorized_keys on server, but i dont think there is a way to properly detect source hostname where user tries to connect. It is possible at all ?

  Read the article

• What are the replacement options for an IDE hd for a DOS based system?

  - by dummzeuch

  I have got a few "embedded" systems running MSDOS 6.2 which boot from and store data to IDE hard disks. Since these drives are nearing their end of life, the question arises how we can replace them. The requirements are: DOS must be able to install and boot from these drives. They must be able to sustain heavy (mostly) write access. If possible, they should be able to survive moderate vibrations (not too bad since the current hds have survived several years of that) I considered the following options so far: other ide hard drives: Unfortunately modern IDE drives are too large so DOS cannot boot from them even if I create small partitions. Older IDE drives are just that: old, so they are probably not the most reliable ones any more. SSDs: There are a few SSDs with IDE interface available. I have not yet tried them. Does anybody have any experience with them? They look like the ideal replacement provided that DOS can boot from them and that writing speed does not deteriorate too much (the old hds are no race cars either). Compact Flash: There are adapters for using CF with IDE controllers and they work fine. DOS can boot from them and they have no problems at all with vibrations. What I am not sure about is their durability. DOS uses FAT so some very few sectors are written every time the medium is being written to. IDE to SATA converters: I have no idea whether they are any good. Has anybody tried them? It might be an option to use one of these to connect an SATA SSD to the system. Are there any alternatives that I have missed? (We are working on replacing these systems, but it will still take a few years.)

  Read the article

• How large is the performance loss for a 64-bit VirtualBox guest running on a 32-bit host?

  - by IllvilJa

  I have a 64-bit Virtualbox guest running Gentoo Linux (amd64) and it is currently hosted on a 32-bit Gentoo laptop. I've noticed that the performance of the VM is very slow compared to the performance of the 32-bit host itself. Also when I compare with another 32-bit Linux VM running on the same host, performance is significantly less on the 64-bit VM. I know that running a 64-bit VM on a 32-bit host does incur some performance penalties for the VM, but does anyone have any deeper knowledge of how large a penalty one might expect in this scenario, roughly speaking? Is a 10% slowdown something to expect, or should it be a slowdown in the 90% range (running at 1/10 the normal speed)? Or to phrase it in another way: would it be reasonable to expect that the performance improvement for the 64-bit VM increases so much that it is worth reinstalling the host machine to run 64-bit Gentoo instead? I'm currently seriously considering that upgrade, but am curious about other peoples experience of the current scenario. I am aware that the host OS will require more RAM when running in 64-bit, but that's OK for me. Also, I do know that one usually don't run a 64-bit VM on a 32-bit server (I'm surprised I even got the VM started in the first place) but things turned out that way when I tried to future proof the VM I was setting up and decided to make it 64-bit anyway.

  Read the article

< Previous Page | 538 539 540 541 542 543 544 545 546 547 548 549  | Next Page >