Search Results

Search found 32130 results on 1286 pages for 'local search'.

Page 569/1286 | < Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >

  • Calling system commands from Perl

    - by Dan J
    In an older version of our code, we called out from Perl to do an LDAP search as follows: # Pass the base DN in via the ldapsearch-specific environment variable # (rather than as the "-b" paramater) to avoid problems of shell # interpretation of special characters in the DN. $ENV{LDAP_BASEDN} = $ldn; $lcmd = "ldapsearch -x -T -1 -h $gLdapServer" . <snip> " > $lworkfile 2>&1"; system($lcmd); if (($? != 0) || (! -e "$lworkfile")) { # Handle the error } The code above would result in a successful LDAP search, and the output of that search would be in the file $lworkfile. Unfortunately, we recently reconfigured openldap on this server so that a "BASE DC=" is specified in /etc/openldap/ldap.conf and /etc/ldap.conf. That change seems to mean ldapsearch ignores the LDAP_BASEDN environment variable, and so my ldapsearch fails. I've tried a couple of different fixes but without success so far: (1) I tried going back to using the "-b" argument to ldapsearch, but escaping the shell metacharacters. I started writing the escaping code: my $ldn_escaped = $ldn; $ldn_escaped =~ s/\/\\/g; $ldn_escaped =~ s/`/\`/g; $ldn_escaped =~ s/$/\$/g; $ldn_escaped =~ s/"/\"/g; That threw up some Perl errors because I haven't escaped those regexes properly in Perl (the line number matches the regex with the backticks in). Backticks found where operator expected at /tmp/mycommand line 404, at end of line At the same time I started to doubt this approach and looked for a better one. (2) I then saw some Stackoverflow questions (here and here) that suggested a better solution. Here's the code: print("Processing..."); # Pass the arguments to ldapsearch by invoking open() with an array. # This ensures the shell does NOT interpret shell metacharacters. my(@cmd_args) = ("-x", "-T", "-1", "-h", "$gLdapPool", "-b", "$ldn", <snip> ); $lcmd = "ldapsearch"; open my $lldap_output, "-|", $lcmd, @cmd_args; while (my $lline = <$lldap_output>) { # I can parse the contents of my file fine } $lldap_output->close; The two problems I am having with approach (2) are: a) Calling open or system with an array of arguments does not let me pass > $lworkfile 2>&1 to the command, so I can't stop the ldapsearch output being sent to screen, which makes my output look ugly: Processing...ldap_bind: Success (0) additional info: Success b) I can't figure out how to choose which location (i.e. path and file name) to the file handle passed to open, i.e. I don't know where $lldap_output is. Can I move/rename it, or inspect it to find out where it is (or is it not actually saved to disk)? Based on the problems with (2), this makes me think I should return back to approach (1), but I'm not quite sure how to

    Read the article

  • Why am I getting a new session ID on every page fetch in my Perl WWW::Mechanize script?

    - by Phill Pafford
    So I'm scraping a site that I have access to via HTTPS, I can login and start the process but each time I hit a new page (URL) the cookie Session Id changes. How do I keep the logged in Cookie Session Id? #!/usr/bin/perl -w use strict; use warnings; use WWW::Mechanize; use HTTP::Cookies; use LWP::Debug qw(+); use HTTP::Request; use LWP::UserAgent; use HTTP::Request::Common; my $un = 'username'; my $pw = 'password'; my $url = 'https://subdomain.url.com/index.do'; my $agent = WWW::Mechanize->new(cookie_jar => {}, autocheck => 0); $agent->{onerror}=\&WWW::Mechanize::_warn; $agent->agent('Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.3) Gecko/20100407 Ubuntu/9.10 (karmic) Firefox/3.6.3'); $agent->get($url); $agent->form_name('form'); $agent->field(username => $un); $agent->field(password => $pw); $agent->click("Log In"); print "After Login Cookie: "; print $agent->cookie_jar->as_string(); print "\n\n"; my $searchURL='https://subdomain.url.com/search.do'; $agent->get($searchURL); print "After Search Cookie: "; print $agent->cookie_jar->as_string(); print "\n"; The output: After Login Cookie: Set-Cookie3: JSESSIONID=367C6D; path="/thepath"; domain=subdomina.url.com; path_spec; secure; discard; version=0 After Search Cookie: Set-Cookie3: JSESSIONID=855402; path="/thepath"; domain=subdomain.com.com; path_spec; secure; discard; version=0 Also I think the site requires a CERT (Well in the browser it does), would this be the correct way to add it? $ENV{HTTPS_CERT_FILE} = 'SUBDOMAIN.URL.COM'; ## Insert this after the use HTTP::Request... Also for the CERT In using the first option in this list, is this correct? X.509 Certificate (PEM) X.509 Certificate with chain (PEM) X.509 Certificate (DER) X.509 Certificate (PKCS#7) X.509 Certificate with chain (PKCS#7)

    Read the article

  • Converting XML to RSS

    - by hkw
    I've got an xml feed that will be published in one location of our website, and would like to repurpose that for an RSS feed. A few different pages on the website will also be referencing the same xml - all of those transformations are set up and working. The base xml file (XMLTEST.xml) is using this structure: <POST> <item> <POST_ID>80000852</POST_ID> <POST_TITLE>title</POST_TITLE> <POST_CHANNEL>I</POST_CHANNEL> <POST_DESC>description</POST_DESC> <LINK>http://www...</LINK> <STOC>N</STOC> </item> </POST> I'm trying to transform the xml into an RSS feed using the following setup (feed.xml + rss.xsl) feed.xml: <?xml-stylesheet href="rss.xsl" type="text/xsl"?> <RSSChannels> <RSSChannel src="XMLTEST.xml"/> </RSSChannels> rss.xsl: <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <xsl:output method="xml" omit-xml-declaration="yes" /> <xsl:template match="RSSChannels"> <rss version="2.0"> <channel> <title>site title</title> <link></link> <description>Site description...</description> <xsl:apply-templates /> </channel> </rss> </xsl:template> <xsl:template match="RSSChannel"> <xsl:apply-templates select="document(@src)" /> </xsl:template> <xsl:template match="item"> <xsl:choose> <xsl:when test="STOC = 'Y'"></xsl:when> <xsl:when test="POST_CHANNEL = 'I'"></xsl:when> <xsl:otherwise> <item> <title> <xsl:value-of select="*[local-name()='POST_TITLE']" /> </title> <link> <xsl:value-of select="*[local-name()='LINK']" /> </link> <description> <xsl:value-of select="*[local-name()='POST_DESC']" /> </description> </item> </xsl:otherwise> </xsl:choose> </xsl:template> </xsl:stylesheet> When I try to view the output of feed.xml in Firefox, all of the filtering is applied correctly (sorting out items that shouldn't be published in that channel), but the page outputs as plain text, rather than the usual feed-detection that takes place in Firefox. Any ideas on what I'm missing? Thanks for any suggestions you can provide.

    Read the article

  • Trouble in ActiveX multi-thread invoke javascript callback routine

    - by code0tt
    everyone. I'm get some trouble in ActiveX programming with ATL. I try to make a activex which can async-download files from http server to local folder and after download it will invoke javascript callback function. My solution: run a thread M to monitor download thread D, when D is finish the job, M is going to terminal themself and invoke IDispatch inferface to call javascript function. **************** THERE IS MY CODE: **************** /* javascript code */ funciton download() { var xfm = new ActiveXObject("XFileMngr.FileManager.1"); xfm.download( 'http://somedomain/somefile','localdev:\\folder\localfile',function(msg){alert(msg);}); } /* C++ code */ // main routine STDMETHODIMP CFileManager::download(BSTR url, BSTR local, VARIANT scriptCallback) { CString csURL(url); CString csLocal(local); CAsyncDownload download; download.Download(this, csURL, csLocal, scriptCallback); return S_OK; } // parts of CAsyncDownload.h typedef struct tagThreadData { CAsyncDownload* pThis; } THREAD_DATA, *LPTHREAD_DATA; class CAsyncDownload : public IBindStatusCallback { private: LPUNKNOWN pcaller; CString csRemoteFile; CString csLocalFile; CComPtr<IDispatch> spCallback; public: void onDone(HRESULT hr); HRESULT Download(LPUNKNOWN caller, CString& csRemote, CString& csLocal, VARIANT callback); static DWORD __stdcall ThreadProc(void* param); }; // parts of CAsyncDownload.cpp void CAsyncDownload::onDone(HRESULT hr) { if(spCallback) { TRACE(TEXT("invoke callback function\n")); CComVariant vParams[1]; vParams[0] = "callback is working!"; DISPPARAMS params = { vParams, NULL, 1, 0 }; HRESULT hr = spCallback->Invoke(0, IID_NULL, LOCALE_USER_DEFAULT, DISPATCH_METHOD, &params, NULL, NULL, NULL); if(FAILED(hr)) { CString csBuffer; csBuffer.Format(TEXT("invoke failed, result value: %d \n"),hr); TRACE(csBuffer); }else { TRACE(TEXT("invoke was successful\n")); } } } HRESULT CAsyncDownload::Download(LPUNKNOWN caller, CString& csRemote, CString& csLocal, VARIANT callback) { CoInitializeEx(NULL, COINIT_MULTITHREADED); csRemoteFile = csRemote; csLocalFile = csLocal; pcaller = caller; switch(callback.vt){ case VT_DISPATCH: case VT_VARIANT:{ spCallback = callback.pdispVal; } break; default:{ spCallback = NULL; } } LPTHREAD_DATA pData = new THREAD_DATA; pData->pThis = this; // create monitor thread M HANDLE hThread = CreateThread(NULL, 0, ThreadProc, (void*)(pData), 0, NULL); if(!hThread) { delete pData; return HRESULT_FROM_WIN32(GetLastError()); } WaitForSingleObject(hThread, INFINITE); CloseHandle(hThread); CoUninitialize(); return S_OK; } DWORD __stdcall CAsyncDownload::ThreadProc(void* param) { LPTHREAD_DATA pData = (LPTHREAD_DATA)param; // here, we will create http download thread D // when download job is finish, call onDone method; pData->pThis->onDone(S_OK); delete pData; return 0; } **************** CODE FINISH **************** OK, above is parts of my source code, if I call onDone method in sub-thread, I will get OLE ERROR(-2147418113 (8000FFFF) Catastrophic failure.). Did I miss something? please help me to figure it out.

    Read the article

  • Very different font sizes across browsers

    - by Yang
    Chrome/WebKit and Firefox have different rendering engines which render fonts differently, in particular with differing dimensions. This isn't too surprising, but what's surprising is the magnitude of some of the differences. I can always tweak individual elements on a page to be more similar, but that's tedious, to say the least. I've been searching for more systematic solutions, but many resources (e.g. SO answers) simply say "use a reset package." While I'm sure this fixes a bunch of other things like padding and spacing, it doesn't seem to make any difference for font dimensions. For instance, if I take the reset package from http://html5reset.org/, I can show pretty big differences (note the layout dimensions shown in the inspectors). [The images below are actually higher res than shown/resized in this answer.] <h1 style="font-size:64px; background-color: #eee;">Article Header</h1> With Helvetica, Chrome is has the shorter height instead. <h1 style="font-size:64px; background-color: #eee; font-family: Helvetica">Article Header</h1> Using a different font, Chrome again renders a much taller font, but additionally the letter spacing goes haywire (probably due to the boldification of the font): <style> @font-face { font-family: "MyriadProRegular"; src: url("fonts/myriadpro-regular-webfont.eot"); src: local("?"), url("fonts/myriadpro-regular-webfont.woff") format("woff"), url("fonts/myriadpro-regular-webfont.ttf") format("truetype"), url("fonts/myriadpro-regular-webfont.svg#webfonteknRmz0m") format("svg"); font-weight: normal; font-style: normal; } @font-face { font-family: "MyriadProLight"; src: url("fonts/myriadpro-light-webfont.eot"); src: local("?"), url("fonts/myriadpro-light-webfont.woff") format("woff"), url("fonts/myriadpro-light-webfont.ttf") format("truetype"), url("fonts/myriadpro-light-webfont.svg#webfont2SBUkD9p") format("svg"); font-weight: normal; font-style: normal; } @font-face { font-family: "MyriadProSemibold"; src: url("fonts/myriadpro-semibold-webfont.eot"); src: local("?"), url("fonts/myriadpro-semibold-webfont.woff") format("woff"), url("fonts/myriadpro-semibold-webfont.ttf") format("truetype"), url("fonts/myriadpro-semibold-webfont.svg#webfontM3ufnW4Z") format("svg"); font-weight: normal; font-style: normal; } </style> ... <h1 style="font-size:64px; background-color: #eee; font-family: Helvetica">Article Header</h1> I've tried a few resets/normalize packages to no avail. I just wanted to confirm here that this is indeed a fact of life (even omitting the more glaring offenders like IE and mobile) and I'm not missing some super-awesome solution to this mess.

    Read the article

  • using ajax to post comments in cakephp results in 404 error, but no errors locally?

    - by Paul
    Using an ajax helper created for use with Jquery I've created a form that posts comments to "/comments/add", and this works as expected on my local wamp server but not on my production server. On my production server I get a '404 error, cannot find /comments/add'. I've spent quite a bit of time searching for a resolution with no luck so far. I've focused on trying to identify a gap but nothing jumps out at me. Here are some observations: works as expected on local wamp server requestHandler is listed as component files on both local and production server are the same controllers folder has write access autoLayout and autoRender are both set to false Here is the form in my view: <div class="comments form"> <?php echo $ajax->form('/comments/add', 'tournament', array('url' => '/comments/add', 'update' => 'Comments', 'indicator' => 'commentSaved'));?> <fieldset> <legend><?php __('Add Comment');?></legend> <div id="commentSaved" style="display: none; float: right;"> <h2>Loading...</h2> </div> <?php echo $form->hidden('Comment.foreign_id', array('value' => $tournament['Tournament']['id'])); echo $form->hidden('Comment.belongs_to', array('value' => 'Tournament')); echo $form->input('Comment.name'); echo $form->input('Comment.email'); echo $form->input('Comment.web', array('value' => 'http://')); echo $form->input('Comment.content'); ?> </fieldset> <?php echo $form->end('Submit');?> </div> And here is my 'comment's controller add action: function add() { if($this->RequestHandler->isAjax()) { $this->autoLayout = false; $this->autoRender=false; $this->Comment->recursive =-1; $commentInfos = $this->Comment->findAllByIp($_SERVER['REMOTE_ADDR']); $spam = FALSE; foreach($commentInfos as $commentInfo) { if ( time() - strtotime($commentInfo['Comment']['created']) < 180) { $spam = TRUE; } } if ($spam === FALSE) { if (!empty($this->data)) { $this->data['Comment']['ip'] = $_SERVER['REMOTE_ADDR']; $this->Comment->create(); if ($this->Comment->save($this->data)) { $this->Comment->recursive =-1; $comments = $this->Comment->findAll(array('Comment.foreign_id' => $this->data['Comment']['foreign_id'], 'Comment.belongs_to' => $this->data['Comment']['belongs_to'], 'Comment.status' =>'approved')); $this->set(compact('comments')); $this->viewPath = 'elements'.DS.'posts'; $this->render('comments'); } } } else { $this->Comment->recursive =-1; $comments = $this->Comment->findAll(array('Comment.foreign_id' => $this->data['Comment']['foreign_id'], 'Comment.belongs_to' => $this->data['Comment']['belongs_to'], 'Comment.status' =>'approved')); $this->set(compact('comments')); $this->viewPath = 'elements'.DS.'posts'; $this->render('spam'); } } else { $this->Session->setFlash(__('Invalid Action. Please view a post to add a comment.', true)); $this->redirect(array('controller' => 'pages', 'action'=>'display', 'home')); } } As you can see I've made sure that 'autoLayout' and 'autoRender' are set to false, but in Firebug I still get a 404 error stating /comments/add cannot be found on the production server. I should also point out that I'm using jquery, jquery.form and jquery.editable as well as a ajax helper created to be used with jquery. Any help or even suggestions about how to trouble shoot this is really appreciated. Cheers, Paul

    Read the article

  • ASP.NET gridview control in side update panel has a problem

    - by Eyla
    Greetings, I have gridview with SelectedIndexChanged event. when I click on a record in gridview it should call the SelectedIndexChanged event and do some operations. SelectedIndexChanged event is working OK, but when I put the gridview inside ajax updatepanle SelectedIndexChanged event will not response even if I add AsyncPostBackTrigger trigger for SelectedIndexChanged event. Please look at my code and advice me what I should do!! Thank you <%@ Page Title="" Language="C#" MasterPageFile="~/Master.Master" AutoEventWireup="true" CodeBehind="WebForm1.aspx.cs" Inherits="IMAM_APPLICATION.WebForm1" %> <%@ Register Assembly="AjaxControlToolkit" Namespace="AjaxControlToolkit" TagPrefix="cc1" %> <asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" runat="server"> <div id="mydiv"> <asp:UpdatePanel ID="UpdatePanel1" runat="server"> <ContentTemplate> <br /> <br /> <br /> <asp:GridView ID="GridView1" runat="server" style="position:absolute; top: 280px; left: 30px; height: 240px; width: 915px;" PageSize="5" onselectedindexchanged="GridView1_SelectedIndexChanged" AutoGenerateColumns="False" DataKeyNames="idcontact_info"> <Columns> <asp:CommandField ShowSelectButton="True" /> <asp:BoundField AccessibleHeaderText="Midle Name" DataField="Midle_Name" /> <asp:BoundField DataField="Last_Name" HeaderText="Last Name" /> <asp:BoundField DataField="Phone_home" HeaderText="Phone Home" /> <asp:BoundField DataField="cell_home" HeaderText="Mobile Home" /> <asp:BoundField DataField="phone_work" HeaderText="Phone Work" /> <asp:BoundField DataField="cell_Work" HeaderText="Mobile Work" /> <asp:BoundField DataField="Email_Home" HeaderText="Personal Home" /> <asp:BoundField DataField="Email_work" HeaderText="Work Email" /> </Columns> </asp:GridView> <br /> <br /> <br /></ContentTemplate> <Triggers> <asp:AsyncPostBackTrigger ControlID="GridView1" EventName="SelectedIndexChanged" /> </Triggers> </asp:UpdatePanel> <asp:RadioButton ID="rdoSearchFlat" runat="server" style="position:absolute; top: 565px; left: 70px;" Text="Flat Search" GroupName="Search"/> <asp:TextBox ID="txtSearch" runat="server" style="position:absolute; top: 560px; left: 170px;" ></asp:TextBox> <asp:Button ID="btnSearch" runat="server" Text="Search" style="position:absolute; top: 555px; left: 375px;" CausesValidation="False" onclick="btnSearch_Click"/> <asp:Label ID="Label7" runat="server" Style="position: absolute; top: 630px; left: 85px;" Text="First Name"></asp:Label> <asp:TextBox ID="txtFirstName" runat="server" Style="top: 630px; left: 185px; position: absolute; height: 22px; width: 128px"> </asp:TextBox> </div> </asp:Content>

    Read the article

  • How to refresh ListAdapter/ListView in android

    - by user2463990
    I have database with 2 table, custom layout for my listView, and I'm using ListAdapter to display all data on ListView - this works fine. But, I have problem when I wish display something other on listView from my Database. The data is just append on my ListView - I won't this! How I refresh/update ListAdapter? This is my MainActivity: ListAdapter adapter; protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_main); search = (EditText) findViewById(R.id.search); lista = (ListView) findViewById(android.R.id.list); sqlite = new Sqlite(MainActivity.this); //When apps start, listView is populated with data adapter = new SimpleAdapter(this, sqlite.getAllData(), R.layout.lv_layout, new String[]{"ime","naziv","kolicina","adresa"}, new int[]R.id.kupac,R.id.proizvod,R.id.kolicina,R.id.adresa}); setListAdapter(adapter); search.addTextChangedListener(new TextWatcher() { @Override public void onTextChanged(CharSequence s, int start, int before,int count) { // TODO Auto-generated method stub String tekst = s.toString(); ArrayList<HashMap<String, String>> rez = Sqlite.getFilterData(tekst); adapter = new SimpleAdapter(MainActivity.this, rez,R.layout.lv_layout, new String[]{"ime","naziv","kolicina","adresa"}, new int[]{R.id.kupac,R.id.proizvod,R.id.kolicina,R.id.adresa}); lista.setAdapter(adapter); } } The problem is when the method onTextChanged is called. I get all the data but the data just append to my ListView. How to fix it? And this is my Sqlite class where is needed method: ArrayList<HashMap<String,String>> results_criteria = new ArrayList<HashMap<String,String>>(); public ArrayList<HashMap<String, String>> getFilterData(String criteria) { String ime_kupca = ""; String product = ""; String adress = ""; String kolicina = ""; SQLiteDatabase myDb = this.getReadableDatabase(); Cursor cursor = myDb.rawQuery("SELECT " + DB_COLUMN_IME + "," + DB_COLUMN_NAZIV + "," + DB_COLUMN_KOLICINA + "," + DB_COLUMN_ADRESA + " FROM " + DB_TABLE1_NAME + "," + DB_TABLE2_NAME + " WHERE kupac.ID = proizvod.ID AND " + DB_COLUMN_IME + " LIKE '%" + criteria + "%'", null); if(cursor != null){ if(cursor.moveToFirst()){ do{ HashMap<String,String>map = new HashMap<String,String>(); ime_kupca = cursor.getString(cursor.getColumnIndex(DB_COLUMN_IME)); product = cursor.getString(cursor.getColumnIndex(DB_COLUMN_NAZIV)); kolicina = cursor.getString(cursor.getColumnIndex(DB_COLUMN_KOLICINA)); adress = cursor.getString(cursor.getColumnIndex(DB_COLUMN_ADRESA)); map.put("ime", ime_kupca); map.put("naziv", product); map.put("kolicina", kolicina); map.put("adresa", adress); results_criteria.add(map); }while(cursor.moveToNext()); //cursor.close(); } cursor.close(); } Log.i("Rez", "" + results_criteria); return results_criteria;

    Read the article

  • How to draw complex shape from code behind for custom control in resource dictionary

    - by HopelessCoder
    Hi I am new to wpf and am having a problem which may or may not be trivial. I have defined a custom control as follows in the resource dictionary: <ResourceDictionary x:Class="SyringeSlider.Themes.Generic" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:SyringeSlider"> <Style TargetType="{x:Type local:CustomControl1}"> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="{x:Type local:CustomControl1}"> <Border Background="{TemplateBinding Background}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}"> <Canvas Height="{TemplateBinding Height}" Width="{TemplateBinding Width}" Name="syringeCanvas"> </Canvas> </Border> </ControlTemplate> </Setter.Value> </Setter> </Style> </ResourceDictionary> Unfortunately I cannot go beyond this because I would like to draw a geometry onto the canvas consisting of a set of multiple line geometries whose dimensions are calculated as a function of the space available in the canvas. I believe that I need a code behind method to do this, but have not been able to determine how to link the xaml definition to a code behind method. Note that I have set up a class x:Class="SyringeSlider.Themes.Generic" for specifically this purpose, but can't figure out which Canvas property to link the drawing method to. My drawing method looks like this private void CalculateSyringe() { int adjHeight = (int) Height - 1; int adjWidth = (int) Width - 1; // Calculate some very useful values based on the chart above. int borderOffset = (int)Math.Floor(m_borderWidth / 2.0f); int flangeLength = (int)(adjHeight * .05f); int barrelLeftCol = (int)(adjWidth * .10f); int barrelLength = (int)(adjHeight * .80); int barrelRightCol = adjWidth - barrelLeftCol; int coneLength = (int)(adjHeight * .10); int tipLeftCol = (int)(adjWidth * .45); int tipRightCol = adjWidth - tipLeftCol; int tipBotCol = adjWidth - borderOffset; Path mySyringePath = new Path(); PathGeometry mySyringeGeometry = new PathGeometry(); PathFigure mySyringeFigure = new PathFigure(); mySyringeFigure.StartPoint = new Point(0, 0); Point pointA = new Point(0, flangeLength); mySyringeFigure.Segments.Add(new LineSegment(pointA, true)); Point pointB = new Point(); pointB.Y = pointA.Y + barrelLength; pointB.X = 0; mySyringeFigure.Segments.Add(new LineSegment(pointB, true)); // You get the idea....Add more points in this way mySyringeGeometry.Figures.Add(mySyringeFigure); mySyringePath.Data = mySyringeGeometry; } SO my question is: 1) Does what I am trying to do make any sense? 2) Can a use a canvas for this purpose? If not, what are my other options? Thanks!

    Read the article

  • Displaying unnecessary HTML when showing content from MySQL database.

    - by ThatMacLad
    My homepage pulls in content from my MySQL database to create a blog. I've got it so that it only displays an extract from the posts. For some reason it displays HTML tags as well rather than formatting it using the tags (See picture below). Any help is appreciated. Homepage: <html> <head> <title>Ultan Casey | Homepage</title> <link rel="stylesheet" href="css/style.css" type="text/css" /> </head> <body> <div class="wrapper"> <div id="upperbar"> <a href="#">Home</a> <a href="#">About Me</a> <a href="#">Contact Me</a> <a href="http://www.twitter.com/UltanKC">Twitter</a> <form id="search-form" action="/search" method="get"> <input type="text" id="textarea" size="33" name="q" value=""/> <input type="submit" id="submit" value="Search"/> </form> </div> <div id="banner"> <img src="images/banner.jpg"> </div> <div class="sidebar"></div> <div class="posts"> <?php mysql_connect ('localhost', 'root', 'root') ; mysql_select_db ('tmlblog'); $sql = "SELECT * FROM php_blog ORDER BY timestamp DESC LIMIT 5"; $result = mysql_query($sql) or print ("Can't select entries from table php_blog.<br />" . $sql . "<br />" . mysql_error()); while($row = mysql_fetch_array($result)) { $date = date("l F d Y", $row['timestamp']); $title = stripslashes($row['title']); $entry = stripslashes($row['entry']); $id = $row['id']; ?> <?php echo "<p id='title'><strong><a href=\"post.php?id=". $id . "\">" . $title . "</a></strong></p>"; ?><br /> <div class="post-thumb"><img src="thumbs/<?php echo $id ?>.png"></div> <?php echo htmlspecialchars(substr($entry, 0, 1050)) ?>... <br> <hr><br /> Posted on <?php echo $date; ?> </p> </div> </div> </p <?php } ?> </div> </div> </div> </body> </html> Image:

    Read the article

  • Is there a potential for resource leak/double free here?

    - by nhed
    The following sample (not compiled so I won't vouch for syntax) pulls two resources from resource pools (not allocated with new), then "binds" them together with MyClass for the duration of a certain transaction. The transaction, implemented here by myFunc, attempts to protect against leakage of these resources by tracking their "ownership". The local resource pointers are cleared when its obvious that instantiation of MyClass was successful. The local catch, as well as the destructor ~MyClass return the resources to their pool (double-frees are protected by teh above mentioned clearing of the local pointers). Instantiation of MyClass can fail and result in an exception at two steps (1) actual memory allocation, or (2) at the constructor body itself. I do not have a problem with #1, but in the case of #2, if the exception is thrown AFTER m_resA & m_resB were set. Causing both the ~MyClass and the cleanup code of myFunc to assume responsibility for returning these resources to their pools. Is this a reasonable concern? Options I have considered, but didn't like: Smart pointers (like boost's shared_ptr). I didn't see how to apply to a resource pool (aside for wrapping in yet another instance). Allowing double-free to occur at this level but protecting at the resource pools. Trying to use the exception type - trying to deduce that if bad_alloc was caught that MyClass did not take ownership. This will require a try-catch in the constructor to make sure that any allocation failures in ABC() ...more code here... wont be confused with failures to allocate MyClass. Is there a clean, simple solution that I have overlooked? class SomeExtResourceA; class SomeExtResourceB; class MyClass { private: // These resources come out of a resource pool not allocated with "new" for each use by MyClass SomeResourceA* m_resA; SomeResourceB* m_resB; public: MyClass(SomeResourceA* resA, SomeResourceB* resB): m_resA(resA), m_resB(resB) { ABC(); // ... more code here, could throw exceptions } ~MyClass(){ if(m_resA){ m_resA->Release(); } if(m_resB){ m_resB->Release(); } } }; void myFunc(void) { SomeResourceA* resA = NULL; SomeResourceB* resB = NULL; MyClass* pMyInst = NULL; try { resA = g_pPoolA->Allocate(); resB = g_pPoolB->Allocate(); pMyInst = new MyClass(resA,resB); resA=NULL; // ''ownership succesfully transfered to pMyInst resB=NULL; // ''ownership succesfully transfered to pMyInst // Do some work with pMyInst; ...; delete pMyInst; } catch (...) { // cleanup // need to check if resA, or resB were allocated prior // to construction of pMyInst. if(resA) resA->Release(); if(resB) resB->Release(); delete pMyInst; throw; // rethrow caught exception } }

    Read the article

  • Why Do I See the "In Recovery" Msg, and How Can I Prevent it?

    - by John Hansen
    The project I'm working on creates a local copy of the SQL Server database for each SVN branch you work on. We're running SQL Server 2008 Express with Advanced Services on our local machine to host it. When we create a new branch, the build script will create a new database with the ID of that branch, creates the schema objects, and copies over a selection of data from the production shadow server. After the database is created, it, or other databases on the local machine, will often go into "In Recovery" mode for several minutes. After several refreshes it comes up and is happy, but will occasionally go back into "In Recovery" mode. The database is created in simple recovery mode. The file names aren't specified, so it uses default paths for files. The size of the database after loading data is ~400 megs. It is running in SQL Server 2005 compatibility mode. The command that creates the database is: sqlcmd -S $(DBServer) -Q "IF NOT EXISTS (SELECT [name] FROM sysdatabases WHERE [name] = '$(DBName)') BEGIN CREATE DATABASE [$(DBName)]; print 'Created $(DBName)'; END" ...where $(DBName) and $(DBServer) are MSBuild parameters. I got a nice clean log file this morning. When I turned on my computer it starts all five databases. However, two of them show transactions being rolled forward and backwards. The it just keeps trying to start up all five of the databases. 2010-06-10 08:24:59.74 spid52 Starting up database 'ASPState'. 2010-06-10 08:24:59.82 spid52 Starting up database 'CommunityLibrary'. 2010-06-10 08:25:03.97 spid52 Starting up database 'DLG-R8441'. 2010-06-10 08:25:05.07 spid52 2 transactions rolled forward in database 'DLG-R8441' (6). This is an informational message only. No user action is required. 2010-06-10 08:25:05.14 spid52 0 transactions rolled back in database 'DLG-R8441' (6). This is an informational message only. No user action is required. 2010-06-10 08:25:05.14 spid52 Recovery is writing a checkpoint in database 'DLG-R8441' (6). This is an informational message only. No user action is required. 2010-06-10 08:25:11.23 spid52 Starting up database 'DLG-R8979'. 2010-06-10 08:25:12.31 spid36s Starting up database 'DLG-R8441'. 2010-06-10 08:25:13.17 spid52 2 transactions rolled forward in database 'DLG-R8979' (9). This is an informational message only. No user action is required. 2010-06-10 08:25:13.22 spid52 0 transactions rolled back in database 'DLG-R8979' (9). This is an informational message only. No user action is required. 2010-06-10 08:25:13.22 spid52 Recovery is writing a checkpoint in database 'DLG-R8979' (9). This is an informational message only. No user action is required. 2010-06-10 08:25:18.43 spid52 Starting up database 'Rls QA'. 2010-06-10 08:25:19.13 spid46s Starting up database 'DLG-R8979'. 2010-06-10 08:25:23.29 spid36s Starting up database 'DLG-R8441'. 2010-06-10 08:25:27.91 spid52 Starting up database 'ASPState'. 2010-06-10 08:25:29.80 spid41s Starting up database 'DLG-R8979'. 2010-06-10 08:25:31.22 spid52 Starting up database 'Rls QA'. In this case it kept trying to start the databases continuously until I shut down SQL Server at 08:48:19.72, 23 minutes later. Meanwhile, I actually am able to use the databases much of the time.

    Read the article

  • htaccess rewriterule works in one virtualhost, but not a second virtualhost

    - by Casey Flynn
    I have two virtualhosts configured with xampp on mac os x snow lion. Both use the following .htaccess file. <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / # Protect hidden files from being viewed <Files .*> Order Deny,Allow Deny From All </Files> #Removes access to the system folder by users. #Additionally this will allow you to create a System.php controller, #previously this would not have been possible. #'system' can be replaced if you have renamed your system folder. RewriteCond %{REQUEST_URI} ^system.* RewriteRule ^(.*)$ /index.php?/$1 [L] #When your application folder isn't in the system folder #This snippet prevents user access to the application folder #Submitted by: Fabdrol #Rename 'application' to your applications folder name. RewriteCond %{REQUEST_URI} ^application.* RewriteRule ^(.*)$ /index.php?/$1 [L] #Checks to see if the user is attempting to access a valid file, #such as an image or css document, if this isn't true it sends the #request to index.php RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)$ index.php/$01 [L] # If we don't have mod_rewrite installed, all 404's # can be sent to index.php, and everything works as normal. # Submitted by: ElliotHaughin ErrorDocument 404 /index.php My goal is to eliminate /index.php/ from my url strings. This htaccess works perfectly for one project, but not for the other (project/vhost) This is my vhosts.conf # # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information. # In particular, see # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html> # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/foo.log" # with ServerRoot set to "/Applications/xampp/xamppfiles" will be interpreted by the # server as "/Applications/xampp/xamppfiles/logs/foo.log". # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to point the LockFile directive # at a local disk. If you wish to share the same ServerRoot for multiple # httpd daemons, you will need to change at least LockFile and PidFile. # ServerRoot "/Applications/XAMPP/xamppfiles" # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the <VirtualHost> # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule file_cache_module modules/mod_file_cache.so LoadModule cache_module modules/mod_cache.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule mem_cache_module modules/mod_mem_cache.so LoadModule dbd_module modules/mod_dbd.so LoadModule bucketeer_module modules/mod_bucketeer.so LoadModule dumpio_module modules/mod_dumpio.so LoadModule echo_module modules/mod_echo.so LoadModule case_filter_module modules/mod_case_filter.so LoadModule case_filter_in_module modules/mod_case_filter_in.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule include_module modules/mod_include.so LoadModule filter_module modules/mod_filter.so LoadModule charset_lite_module modules/mod_charset_lite.so LoadModule deflate_module modules/mod_deflate.so LoadModule ldap_module modules/mod_ldap.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule expires_module modules/mod_expires.so LoadModule headers_module modules/mod_headers.so LoadModule ident_module modules/mod_ident.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule unique_id_module modules/mod_unique_id.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule asis_module modules/mod_asis.so LoadModule info_module modules/mod_info.so LoadModule suexec_module modules/mod_suexec.so LoadModule cgi_module modules/mod_cgi.so LoadModule cgid_module modules/mod_cgid.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule imagemap_module modules/mod_imagemap.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so #LoadModule apreq_module modules/mod_apreq2.so LoadModule ssl_module modules/mod_ssl.so <IfDefine JUSTTOMAKEAPXSHAPPY> LoadModule php4_module modules/libphp4.so LoadModule php5_module modules/libphp5.so </IfDefine> <IfModule !mpm_winnt_module> <IfModule !mpm_netware_module> # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User nobody Group nogroup </IfModule> </IfModule> # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # <VirtualHost> definition. These values also provide defaults for # any <VirtualHost> containers you may define later in the file. # # All of these directives may appear inside <VirtualHost> containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. [email protected] # ServerAdmin [email protected] # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #ServerName www.example.com:80 # XAMPP ServerName localhost # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # DocumentRoot "/Users/caseyflynn/Documents/workspace/vibecompass" # # Each directory to which Apache has access can be configured with respect # to which services and features are allowed and/or disabled in that # directory (and its subdirectories). # # First, we configure the "default" to be a very restrictive set of # features. # <Directory /> Options FollowSymLinks AllowOverride None #XAMPP #Order deny,allow #Deny from all </Directory> # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # This should be changed to whatever you set DocumentRoot to. # <Directory "/Users/caseyflynn/Documents/workspace/vibecompass"> # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.2/mod/core.html#options # for more information. # Options Indexes FollowSymLinks ExecCGI Includes # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # Options FileInfo AuthConfig Limit # AllowOverride All # # Controls who can get stuff from this server. # Order allow,deny Allow from all </Directory> # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # <IfModule dir_module> DirectoryIndex index.html index.php index.htmls index.htm </IfModule> # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <FilesMatch "^\.ht"> Order allow,deny Deny from all </FilesMatch> # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog logs/error_log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn <IfModule log_config_module> # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a <VirtualHost> # container, they will be logged here. Contrariwise, if you *do* # define per-<VirtualHost> access logfiles, transactions will be # logged therein and *not* in this file. # CustomLog logs/access_log common # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog logs/access_log combined </IfModule> <IfModule alias_module> # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a <Directory> section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # ScriptAlias /cgi-bin/ "/Applications/XAMPP/xamppfiles/cgi-bin/" </IfModule> <IfModule cgid_module> # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock logs/cgisock </IfModule> # # "/Applications/xampp/xamppfiles/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # <Directory "/Applications/XAMPP/xamppfiles/phpmyadmin"> AllowOverride None Options None Order allow,deny Allow from all </Directory> # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain <IfModule mime_module> # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig etc/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z AddType application/x-gzip .gz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi AddHandler cgi-script .cgi .pl # For files that include their own HTTP headers: #AddHandler send-as-is asis # For server-parsed imagemap files: #AddHandler imap-file map # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # AddType text/html .shtml AddOutputFilter INCLUDES .shtml </IfModule> # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile etc/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall is used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # EnableMMAP off EnableSendfile off # Supplemental configuration # # The configuration files in the /Applications/xampp/etc/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include /Applications/XAMPP/etc/extra/httpd-mpm.conf # Multi-language error messages Include /Applications/XAMPP/etc/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include /Applications/XAMPP/etc/extra/httpd-autoindex.conf # Language settings #Include /Applications/XAMPP/etc/extra/httpd-languages.conf # User home directories Include /Applications/XAMPP/etc/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include /Applications/XAMPP/etc/extra/httpd-info.conf # Virtual hosts Include /Applications/XAMPP/etc/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include /Applications/XAMPP/etc/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include /Applications/XAMPP/etc/extra/httpd-dav.conf # Various default settings #Include /Applications/XAMPP/etc/extra/httpd-default.conf # Secure (SSL/TLS) connections Include /Applications/XAMPP/etc/extra/httpd-ssl.conf <IfModule ssl_module> <IfDefine SSL> Include etc/extra/httpd-ssl.conf </IfDefine> </IfModule> # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> #XAMPP Include etc/extra/httpd-xampp.conf Any idea what might be the root of this? ANSWER: had to add this to my httpd.conf file <Directory /Users/caseyflynn/Documents/workspace/cobar> Options FollowSymLinks AllowOverride all #XAMPP Order deny,allow Allow from all </Directory>

    Read the article

  • OpenVPN - Windows 8 to Windows 2008 Server, not connecting

    - by niico
    I have followed this tutorial about setting up an OpenVPN Server on Windows Server - and a client on Windows (in this case Windows 8). The server appears to be running fine - but it is not connecting with this error: Mon Jul 22 19:09:04 2013 Warning: cannot open --log file: C:\Program Files\OpenVPN\log\my-laptop.log: Access is denied. (errno=5) Mon Jul 22 19:09:04 2013 OpenVPN 2.3.2 x86_64-w64-mingw32 [SSL (OpenSSL)] [LZO] [PKCS11] [eurephia] [IPv6] built on Jun 3 2013 Mon Jul 22 19:09:04 2013 MANAGEMENT: TCP Socket listening on [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:04 2013 Need hold release from management interface, waiting... Mon Jul 22 19:09:05 2013 MANAGEMENT: Client connected from [AF_INET]127.0.0.1:25340 Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'state on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'log all on' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold off' Mon Jul 22 19:09:05 2013 MANAGEMENT: CMD 'hold release' Mon Jul 22 19:09:05 2013 Socket Buffers: R=[65536->65536] S=[65536->65536] Mon Jul 22 19:09:05 2013 UDPv4 link local: [undef] Mon Jul 22 19:09:05 2013 UDPv4 link remote: [AF_INET]66.666.66.666:9999 Mon Jul 22 19:09:05 2013 MANAGEMENT: >STATE:1374494945,WAIT,,, Mon Jul 22 19:10:05 2013 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) Mon Jul 22 19:10:05 2013 TLS Error: TLS handshake failed Mon Jul 22 19:10:05 2013 SIGUSR1[soft,tls-error] received, process restarting Mon Jul 22 19:10:05 2013 MANAGEMENT: >STATE:1374495005,RECONNECTING,tls-error,, Mon Jul 22 19:10:05 2013 Restart pause, 2 second(s) Note I have changed the IP and port no (it uses a non-standard port for security reasons). That port is open on the hardware firewall. The server logs are showing a connection attempt from my client: TLS: Initial packet from [AF_INET]118.68.xx.xx:65011, sid=081af4ed xxxxxxxx Mon Jul 22 14:19:15 2013 118.68.xx.xx:65011 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity) How can I problem solve this & find the problem? Thx Update - Client config file: ############################################## # Sample client-side OpenVPN 2.0 config file # # for connecting to multi-client server. # # # # This configuration can be used by multiple # # clients, however each client should have # # its own cert and key files. # # # # On Windows, you might want to rename this # # file so it has a .ovpn extension # ############################################## # Specify that we are a client and that we # will be pulling certain config file directives # from the server. client # Use the same setting as you are using on # the server. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel # if you have more than one. On XP SP2, # you may need to disable the firewall # for the TAP adapter. ;dev-node MyTap # Are we connecting to a TCP or # UDP server? Use the same setting as # on the server. ;proto tcp proto udp # The hostname/IP and port of the server. # You can have multiple remote entries # to load balance between the servers. remote 00.00.00.00 1194 ;remote 00.00.00.00 9999 ;remote my-server-2 1194 # Choose a random host from the remote # list for load-balancing. Otherwise # try hosts in the order specified. ;remote-random # Keep trying indefinitely to resolve the # host name of the OpenVPN server. Very useful # on machines which are not permanently connected # to the internet such as laptops. resolv-retry infinite # Most clients don't need to bind to # a specific local port number. nobind # Downgrade privileges after initialization (non-Windows only) ;user nobody ;group nobody # Try to preserve some state across restarts. persist-key persist-tun # If you are connecting through an # HTTP proxy to reach the actual OpenVPN # server, put the proxy server/IP and # port number here. See the man page # if your proxy server requires # authentication. ;http-proxy-retry # retry on connection failures ;http-proxy [proxy server] [proxy port #] # Wireless networks often produce a lot # of duplicate packets. Set this flag # to silence duplicate packet warnings. ;mute-replay-warnings # SSL/TLS parms. # See the server config file for more # description. It's best to use # a separate .crt/.key file pair # for each client. A single ca # file can be used for all clients. ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\my-laptop.crt" key "C:\\Program Files\\OpenVPN\\config\\my-laptop.key" # Verify server certificate by checking # that the certicate has the nsCertType # field set to "server". This is an # important precaution to protect against # a potential attack discussed here: # http://openvpn.net/howto.html#mitm # # To use this feature, you will need to generate # your server certificates with the nsCertType # field set to "server". The build-key-server # script in the easy-rsa folder will do this. ns-cert-type server # If a tls-auth key is used on the server # then every client must also have the key. ;tls-auth ta.key 1 # Select a cryptographic cipher. # If the cipher option is used on the server # then you must also specify it here. ;cipher x # Enable compression on the VPN link. # Don't enable this unless it is also # enabled in the server config file. comp-lzo # Set log file verbosity. verb 3 # Silence repeating messages ;mute 20 Server config file: ################################################# # Sample OpenVPN 2.0 config file for # # multi-client server. # # # # This file is for the server side # # of a many-clients <-> one-server # # OpenVPN configuration. # # # # OpenVPN also supports # # single-machine <-> single-machine # # configurations (See the Examples page # # on the web site for more info). # # # # This config should work on Windows # # or Linux/BSD systems. Remember on # # Windows to quote pathnames and use # # double backslashes, e.g.: # # "C:\\Program Files\\OpenVPN\\config\\foo.key" # # # # Comments are preceded with '#' or ';' # ################################################# # Which local IP address should OpenVPN # listen on? (optional) ;local 00.00.00.00 # Which TCP/UDP port should OpenVPN listen on? # If you want to run multiple OpenVPN instances # on the same machine, use a different port # number for each one. You will need to # open up this port on your firewall. std 1194 port 1194 # TCP or UDP server? ;proto tcp proto udp # "dev tun" will create a routed IP tunnel, # "dev tap" will create an ethernet tunnel. # Use "dev tap0" if you are ethernet bridging # and have precreated a tap0 virtual interface # and bridged it with your ethernet interface. # If you want to control access policies # over the VPN, you must create firewall # rules for the the TUN/TAP interface. # On non-Windows systems, you can give # an explicit unit number, such as tun0. # On Windows, use "dev-node" for this. # On most systems, the VPN will not function # unless you partially or fully disable # the firewall for the TUN/TAP interface. ;dev tap dev tun # Windows needs the TAP-Win32 adapter name # from the Network Connections panel if you # have more than one. On XP SP2 or higher, # you may need to selectively disable the # Windows firewall for the TAP adapter. # Non-Windows systems usually don't need this. ;dev-node MyTap # SSL/TLS root certificate (ca), certificate # (cert), and private key (key). Each client # and the server must have their own cert and # key file. The server and all clients will # use the same ca file. # # See the "easy-rsa" directory for a series # of scripts for generating RSA certificates # and private keys. Remember to use # a unique Common Name for the server # and each of the client certificates. # # Any X509 key management system can be used. # OpenVPN can also use a PKCS #12 formatted key file # (see "pkcs12" directive in man page). ca "C:\\Program Files\\OpenVPN\\config\\ca.crt" cert "C:\\Program Files\\OpenVPN\\config\\server.crt" key "C:\\Program Files\\OpenVPN\\config\\server.key" # Diffie hellman parameters. # Generate your own with: # openssl dhparam -out dh1024.pem 1024 # Substitute 2048 for 1024 if you are using # 2048 bit keys. dh "C:\\Program Files\\OpenVPN\\config\\dh2048.pem" # Configure server mode and supply a VPN subnet # for OpenVPN to draw client addresses from. # The server will take 10.8.0.1 for itself, # the rest will be made available to clients. # Each client will be able to reach the server # on 10.8.0.1. Comment this line out if you are # ethernet bridging. See the man page for more info. server 10.8.0.0 255.255.255.0 # Maintain a record of client <-> virtual IP address # associations in this file. If OpenVPN goes down or # is restarted, reconnecting clients can be assigned # the same virtual IP address from the pool that was # previously assigned. ifconfig-pool-persist ipp.txt # Configure server mode for ethernet bridging. # You must first use your OS's bridging capability # to bridge the TAP interface with the ethernet # NIC interface. Then you must manually set the # IP/netmask on the bridge interface, here we # assume 10.8.0.4/255.255.255.0. Finally we # must set aside an IP range in this subnet # (start=10.8.0.50 end=10.8.0.100) to allocate # to connecting clients. Leave this line commented # out unless you are ethernet bridging. ;server-bridge 10.8.0.4 255.255.255.0 10.8.0.50 10.8.0.100 # Configure server mode for ethernet bridging # using a DHCP-proxy, where clients talk # to the OpenVPN server-side DHCP server # to receive their IP address allocation # and DNS server addresses. You must first use # your OS's bridging capability to bridge the TAP # interface with the ethernet NIC interface. # Note: this mode only works on clients (such as # Windows), where the client-side TAP adapter is # bound to a DHCP client. ;server-bridge # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push "route 192.168.10.0 255.255.255.0" ;push "route 192.168.20.0 255.255.255.0" # To assign specific IP addresses to specific # clients or if a connecting client has a private # subnet behind it that should also have VPN access, # use the subdirectory "ccd" for client-specific # configuration files (see man page for more info). # EXAMPLE: Suppose the client # having the certificate common name "Thelonious" # also has a small subnet behind his connecting # machine, such as 192.168.40.128/255.255.255.248. # First, uncomment out these lines: ;client-config-dir ccd ;route 192.168.40.128 255.255.255.248 # Then create a file ccd/Thelonious with this line: # iroute 192.168.40.128 255.255.255.248 # This will allow Thelonious' private subnet to # access the VPN. This example will only work # if you are routing, not bridging, i.e. you are # using "dev tun" and "server" directives. # EXAMPLE: Suppose you want to give # Thelonious a fixed VPN IP address of 10.9.0.1. # First uncomment out these lines: ;client-config-dir ccd ;route 10.9.0.0 255.255.255.252 # Then add this line to ccd/Thelonious: # ifconfig-push 10.9.0.1 10.9.0.2 # Suppose that you want to enable different # firewall access policies for different groups # of clients. There are two methods: # (1) Run multiple OpenVPN daemons, one for each # group, and firewall the TUN/TAP interface # for each group/daemon appropriately. # (2) (Advanced) Create a script to dynamically # modify the firewall in response to access # from different clients. See man # page for more info on learn-address script. ;learn-address ./script # If enabled, this directive will configure # all clients to redirect their default # network gateway through the VPN, causing # all IP traffic such as web browsing and # and DNS lookups to go through the VPN # (The OpenVPN server machine may need to NAT # or bridge the TUN/TAP interface to the internet # in order for this to work properly). ;push "redirect-gateway def1 bypass-dhcp" # Certain Windows-specific network settings # can be pushed to clients, such as DNS # or WINS server addresses. CAVEAT: # http://openvpn.net/faq.html#dhcpcaveats # The addresses below refer to the public # DNS servers provided by opendns.com. ;push "dhcp-option DNS 208.67.222.222" ;push "dhcp-option DNS 208.67.220.220" # Uncomment this directive to allow differenta # clients to be able to "see" each other. # By default, clients will only see the server. # To force clients to only see the server, you # will also need to appropriately firewall the # server's TUN/TAP interface. ;client-to-client # Uncomment this directive if multiple clients # might connect with the same certificate/key # files or common names. This is recommended # only for testing purposes. For production use, # each client should have its own certificate/key # pair. # # IF YOU HAVE NOT GENERATED INDIVIDUAL # CERTIFICATE/KEY PAIRS FOR EACH CLIENT, # EACH HAVING ITS OWN UNIQUE "COMMON NAME", # UNCOMMENT THIS LINE OUT. ;duplicate-cn # The keepalive directive causes ping-like # messages to be sent back and forth over # the link so that each side knows when # the other side has gone down. # Ping every 10 seconds, assume that remote # peer is down if no ping received during # a 120 second time period. keepalive 10 120 # For extra security beyond that provided # by SSL/TLS, create an "HMAC firewall" # to help block DoS attacks and UDP port flooding. # # Generate with: # openvpn --genkey --secret ta.key # # The server and each client must have # a copy of this key. # The second parameter should be '0' # on the server and '1' on the clients. ;tls-auth ta.key 0 # This file is secret # Select a cryptographic cipher. # This config item must be copied to # the client config file as well. ;cipher BF-CBC # Blowfish (default) ;cipher AES-128-CBC # AES ;cipher DES-EDE3-CBC # Triple-DES # Enable compression on the VPN link. # If you enable it here, you must also # enable it in the client config file. comp-lzo # The maximum number of concurrently connected # clients we want to allow. ;max-clients 100 # It's a good idea to reduce the OpenVPN # daemon's privileges after initialization. # # You can uncomment this out on # non-Windows systems. ;user nobody ;group nobody # The persist options will try to avoid # accessing certain resources on restart # that may no longer be accessible because # of the privilege downgrade. persist-key persist-tun # Output a short status file showing # current connections, truncated # and rewritten every minute. status openvpn-status.log # By default, log messages will go to the syslog (or # on Windows, if running as a service, they will go to # the "\Program Files\OpenVPN\log" directory). # Use log or log-append to override this default. # "log" will truncate the log file on OpenVPN startup, # while "log-append" will append to it. Use one # or the other (but not both). ;log openvpn.log ;log-append openvpn.log # Set the appropriate level of log # file verbosity. # # 0 is silent, except for fatal errors # 4 is reasonable for general usage # 5 and 6 can help to debug connection problems # 9 is extremely verbose verb 3 # Silence repeating messages. At most 20 # sequential messages of the same message # category will be output to the log. ;mute 20 I have changed IP's for security

    Read the article

  • Issue accessing remote Infinispan mbeans

    - by user1960172
    I am able to access the Mbeans by local Jconsole but not able to access the MBEANS from a remote Host. My COnfiguration: <?xml version='1.0' encoding='UTF-8'?> <server xmlns="urn:jboss:domain:1.4"> <extensions> <extension module="org.infinispan.server.endpoint"/> <extension module="org.jboss.as.clustering.infinispan"/> <extension module="org.jboss.as.clustering.jgroups"/> <extension module="org.jboss.as.connector"/> <extension module="org.jboss.as.jdr"/> <extension module="org.jboss.as.jmx"/> <extension module="org.jboss.as.logging"/> <extension module="org.jboss.as.modcluster"/> <extension module="org.jboss.as.naming"/> <extension module="org.jboss.as.remoting"/> <extension module="org.jboss.as.security"/> <extension module="org.jboss.as.threads"/> <extension module="org.jboss.as.transactions"/> <extension module="org.jboss.as.web"/> </extensions> <management> <security-realms> <security-realm name="ManagementRealm"> <authentication> <local default-user="$local"/> <properties path="mgmt-users.properties" relative-to="jboss.server.config.dir"/> </authentication> </security-realm> <security-realm name="ApplicationRealm"> <authentication> <local default-user="$local" allowed-users="*"/> <properties path="application-users.properties" relative-to="jboss.server.config.dir"/> </authentication> </security-realm> </security-realms> <management-interfaces> <native-interface security-realm="ManagementRealm"> <socket-binding native="management-native"/> </native-interface> <http-interface security-realm="ManagementRealm"> <socket-binding http="management-http"/> </http-interface> </management-interfaces> </management> <profile> <subsystem xmlns="urn:jboss:domain:logging:1.2"> <console-handler name="CONSOLE"> <level name="INFO"/> <formatter> <pattern-formatter pattern="%K{level}%d{HH:mm:ss,SSS} %-5p [%c] (%t) %s%E%n"/> </formatter> </console-handler> <periodic-rotating-file-handler name="FILE" autoflush="true"> <formatter> <pattern-formatter pattern="%d{HH:mm:ss,SSS} %-5p [%c] (%t) %s%E%n"/> </formatter> <file relative-to="jboss.server.log.dir" path="server.log"/> <suffix value=".yyyy-MM-dd"/> <append value="true"/> </periodic-rotating-file-handler> <logger category="com.arjuna"> <level name="WARN"/> </logger> <logger category="org.apache.tomcat.util.modeler"> <level name="WARN"/> </logger> <logger category="org.jboss.as.config"> <level name="DEBUG"/> </logger> <logger category="sun.rmi"> <level name="WARN"/> </logger> <logger category="jacorb"> <level name="WARN"/> </logger> <logger category="jacorb.config"> <level name="ERROR"/> </logger> <root-logger> <level name="INFO"/> <handlers> <handler name="CONSOLE"/> <handler name="FILE"/> </handlers> </root-logger> </subsystem> <subsystem xmlns="urn:infinispan:server:endpoint:6.0"> <hotrod-connector socket-binding="hotrod" cache-container="clustered"> <topology-state-transfer lazy-retrieval="false" lock-timeout="1000" replication-timeout="5000"/> </hotrod-connector> <memcached-connector socket-binding="memcached" cache-container="clustered"/> <!--<rest-connector virtual-server="default-host" cache-container="clustered" security-domain="other" auth-method="BASIC"/> --> <rest-connector virtual-server="default-host" cache-container="clustered" /> <websocket-connector socket-binding="websocket" cache-container="clustered"/> </subsystem> <subsystem xmlns="urn:jboss:domain:datasources:1.1"> <datasources/> </subsystem> <subsystem xmlns="urn:infinispan:server:core:5.3" default-cache-container="clustered"> <cache-container name="clustered" default-cache="default"> <transport executor="infinispan-transport" lock-timeout="60000"/> <distributed-cache name="default" mode="SYNC" segments="20" owners="2" remote-timeout="30000" start="EAGER"> <locking isolation="READ_COMMITTED" acquire-timeout="30000" concurrency-level="1000" striping="false"/> <transaction mode="NONE"/> </distributed-cache> <distributed-cache name="memcachedCache" mode="SYNC" segments="20" owners="2" remote-timeout="30000" start="EAGER"> <locking isolation="READ_COMMITTED" acquire-timeout="30000" concurrency-level="1000" striping="false"/> <transaction mode="NONE"/> </distributed-cache> <distributed-cache name="namedCache" mode="SYNC" start="EAGER"/> </cache-container> <cache-container name="security"/> </subsystem> <subsystem xmlns="urn:jboss:domain:jca:1.1"> <archive-validation enabled="true" fail-on-error="true" fail-on-warn="false"/> <bean-validation enabled="true"/> <default-workmanager> <short-running-threads> <core-threads count="50"/> <queue-length count="50"/> <max-threads count="50"/> <keepalive-time time="10" unit="seconds"/> </short-running-threads> <long-running-threads> <core-threads count="50"/> <queue-length count="50"/> <max-threads count="50"/> <keepalive-time time="10" unit="seconds"/> </long-running-threads> </default-workmanager> <cached-connection-manager/> </subsystem> <subsystem xmlns="urn:jboss:domain:jdr:1.0"/> <subsystem xmlns="urn:jboss:domain:jgroups:1.2" default-stack="${jboss.default.jgroups.stack:udp}"> <stack name="udp"> <transport type="UDP" socket-binding="jgroups-udp"/> <protocol type="PING"/> <protocol type="MERGE2"/> <protocol type="FD_SOCK" socket-binding="jgroups-udp-fd"/> <protocol type="FD_ALL"/> <protocol type="pbcast.NAKACK"/> <protocol type="UNICAST2"/> <protocol type="pbcast.STABLE"/> <protocol type="pbcast.GMS"/> <protocol type="UFC"/> <protocol type="MFC"/> <protocol type="FRAG2"/> <protocol type="RSVP"/> </stack> <stack name="tcp"> <transport type="TCP" socket-binding="jgroups-tcp"/> <!--<protocol type="MPING" socket-binding="jgroups-mping"/>--> <protocol type="TCPPING"> <property name="initial_hosts">10.32.50.53[7600],10.32.50.64[7600]</property> </protocol> <protocol type="MERGE2"/> <protocol type="FD_SOCK" socket-binding="jgroups-tcp-fd"/> <protocol type="FD"/> <protocol type="VERIFY_SUSPECT"/> <protocol type="pbcast.NAKACK"> <property name="use_mcast_xmit">false</property> </protocol> <protocol type="UNICAST2"/> <protocol type="pbcast.STABLE"/> <protocol type="pbcast.GMS"/> <protocol type="UFC"/> <protocol type="MFC"/> <protocol type="FRAG2"/> <protocol type="RSVP"/> </stack> </subsystem> <subsystem xmlns="urn:jboss:domain:jmx:1.1"> <show-model value="true"/> <remoting-connector use-management-endpoint="false"/> </subsystem> <subsystem xmlns="urn:jboss:domain:modcluster:1.1"> <mod-cluster-config advertise-socket="modcluster" connector="ajp" excluded-contexts="console"> <dynamic-load-provider> <load-metric type="busyness"/> </dynamic-load-provider> </mod-cluster-config> </subsystem> <subsystem xmlns="urn:jboss:domain:naming:1.2"/> <subsystem xmlns="urn:jboss:domain:remoting:1.1"> <connector name="remoting-connector" socket-binding="remoting" security-realm="ApplicationRealm"/> </subsystem> <subsystem xmlns="urn:jboss:domain:security:1.2"> <security-domains> <security-domain name="other" cache-type="infinispan"> <authentication> <login-module code="Remoting" flag="optional"> <module-option name="password-stacking" value="useFirstPass"/> </login-module> <login-module code="RealmUsersRoles" flag="required"> <module-option name="usersProperties" value="${jboss.server.config.dir}/application-users.properties"/> <module-option name="rolesProperties" value="${jboss.server.config.dir}/application-roles.properties"/> <module-option name="realm" value="ApplicationRealm"/> <module-option name="password-stacking" value="useFirstPass"/> </login-module> </authentication> </security-domain> <security-domain name="jboss-web-policy" cache-type="infinispan"> <authorization> <policy-module code="Delegating" flag="required"/> </authorization> </security-domain> </security-domains> </subsystem> <subsystem xmlns="urn:jboss:domain:threads:1.1"> <thread-factory name="infinispan-factory" group-name="infinispan" priority="5"/> <unbounded-queue-thread-pool name="infinispan-transport"> <max-threads count="25"/> <keepalive-time time="0" unit="milliseconds"/> <thread-factory name="infinispan-factory"/> </unbounded-queue-thread-pool> </subsystem> <subsystem xmlns="urn:jboss:domain:transactions:1.2"> <core-environment> <process-id> <uuid/> </process-id> </core-environment> <recovery-environment socket-binding="txn-recovery-environment" status-socket-binding="txn-status-manager"/> <coordinator-environment default-timeout="300"/> </subsystem> <subsystem xmlns="urn:jboss:domain:web:1.1" default-virtual-server="default-host" native="false"> <connector name="http" protocol="HTTP/1.1" scheme="http" socket-binding="http"/> <connector name="ajp" protocol="AJP/1.3" scheme="http" socket-binding="ajp"/> <virtual-server name="default-host" enable-welcome-root="false"> <alias name="localhost"/> <alias name="example.com"/> </virtual-server> </subsystem> </profile> <interfaces> <interface name="management"> <inet-address value="${jboss.bind.address.management:10.32.222.111}"/> </interface> <interface name="public"> <inet-address value="${jboss.bind.address:10.32.222.111}"/> </interface> </interfaces> <socket-binding-group name="standard-sockets" default-interface="public" port-offset="${jboss.socket.binding.port-offset:0}"> <socket-binding name="management-native" interface="management" port="${jboss.management.native.port:9999}"/> <socket-binding name="management-http" interface="management" port="${jboss.management.http.port:9990}"/> <socket-binding name="management-https" interface="management" port="${jboss.management.https.port:9443}"/> <socket-binding name="ajp" port="8089"/> <socket-binding name="hotrod" port="11222"/> <socket-binding name="http" port="8080"/> <socket-binding name="https" port="8443"/> <socket-binding name="jgroups-mping" port="0" multicast-address="${jboss.default.multicast.address:234.99.54.14}" multicast-port="45700"/> <socket-binding name="jgroups-tcp" port="7600"/> <socket-binding name="jgroups-tcp-fd" port="57600"/> <socket-binding name="jgroups-udp" port="55200" multicast-address="${jboss.default.multicast.address:234.99.54.14}" multicast-port="45688"/> <socket-binding name="jgroups-udp-fd" port="54200"/> <socket-binding name="memcached" port="11211"/> <socket-binding name="modcluster" port="0" multicast-address="224.0.1.115" multicast-port="23364"/> <socket-binding name="remoting" port="4447"/> <socket-binding name="txn-recovery-environment" port="4712"/> <socket-binding name="txn-status-manager" port="4713"/> <socket-binding name="websocket" port="8181"/> </socket-binding-group> </server> Remote Process: service:jmx:remoting-jmx://10.32.222.111:4447 I added user to both management and application realm admin=2a0923285184943425d1f53ddd58ec7a test=2b1be81e1da41d4ea647bd82fc8c2bc9 But when i try to connect its says's: Connection failed: Retry When i use Remote process as:10.32.222.111:4447 on the sever it prompts a warning : 16:29:48,084 ERROR [org.jboss.remoting.remote.connection] (Remoting "djd7w4r1" read-1) JBREM000200: Remote connection failed: java.io.IOException: Received an invali d message length of -2140864253 Also disabled Remote authentication: -Dcom.sun.management.jmxremote -Dcom.sun.management.jmxremote.ssl=false -Dcom.sun.management.jmxremote.authenticate=false -Dcom.sun.management.jmxremote.port=12345 Still not able to connect. Any help will be highly appreciated . Thanks

    Read the article

  • jqGrid (Delete row) - How to send additional POST data???

    - by ronanray
    Hi experts, I'm having problem with jqGrid delete mechanism as it only send "oper" and "id" parameters in form of POST data (id is the primary key of the table). The problem is, I need to delete a row based on the id and another column value, let's say user_id. How to add this user_id to the POST data??? I can summarize the issue as the following: How to get the cell value (user_id) of the selected row? AND, how to add that user_id to the POST data so it can be retrieved from the code behind where the actual delete process takes place. Sample codes: jQuery("#tags").jqGrid({ url: "subgrid.process.php, editurl: "subgrid.process.php?, datatype: "json", mtype: "POST", colNames:['id','user_id','status_type_id'], colModel:[{name:'id', index:'id', width:100, editable:true}, {name:'user_id', index:'user_id', width:200, editable:true}, {name:'status_type_id', index:'status_type_id', width:200} ], pager: '#pagernav2', rowNum:10, rowList:[10,20,30,40,50,100], sortname: 'id', sortorder: "asc", caption: "Test", height: 200 }); jQuery("#tags").jqGrid('navGrid','#pagernav2', {add:true,edit:false,del:true,search:false}, {}, {mtype:"POST",closeAfterAdd:true,reloadAfterSubmit:true}, // add options {mtype:"POST",reloadAfterSubmit:true}, // del options {} // search options ); Help....

    Read the article

  • OpenCV Mat creation memory leak

    - by Royi Freifeld
    My memory is getting full fairly quick once using the next piece of code. Valgrind shows a memory leak, but everything is allocated on stack and (supposed to be) freed once the function ends. void mult_run_time(int rows, int cols) { Mat matrix(rows,cols,CV_32SC1); Mat row_vec(cols,1,CV_32SC1); /* initialize vector and matrix */ for (int col = 0; col < cols; ++col) { for (int row = 0; row < rows; ++row) { matrix.at<unsigned long>(row,col) = rand() % ULONG_MAX; } row_vec.at<unsigned long>(1,col) = rand() % ULONG_MAX; } /* end initialization of vector and matrix*/ matrix*row_vec; } int main() { for (int row = 0; row < 20; ++row) { for (int col = 0; col < 20; ++col) { mult_run_time(row,col); } } return 0; } Valgrind shows that there is a memory leak in line Mat row_vec(cols,1,CV_32CS1): ==9201== 24,320 bytes in 380 blocks are definitely lost in loss record 50 of 50 ==9201== at 0x4026864: malloc (vg_replace_malloc.c:236) ==9201== by 0x40C0A8B: cv::fastMalloc(unsigned int) (in /usr/local/lib/libopencv_core.so.2.3.1) ==9201== by 0x41914E3: cv::Mat::create(int, int const*, int) (in /usr/local/lib/libopencv_core.so.2.3.1) ==9201== by 0x8048BE4: cv::Mat::create(int, int, int) (mat.hpp:368) ==9201== by 0x8048B2A: cv::Mat::Mat(int, int, int) (mat.hpp:68) ==9201== by 0x80488B0: mult_run_time(int, int) (mat_by_vec_mult.cpp:26) ==9201== by 0x80489F5: main (mat_by_vec_mult.cpp:59) Is it a known bug in OpenCV or am I missing something?

    Read the article

  • bind a WPF datagrid to a datatable

    - by Jim Thomas
    I have used the marvelous example posted at: http://www.codeproject.com/KB/WPF/WPFDataGridExamples.aspx to bind a WPF datagrid to a datatable. The source code below compiles fine; it even runs and displays the contents of the InfoWork datatable in the wpf datagrid. Hooray! But the WPF page with the datagrid will not display in the designer. I get an incomprehensible error instead on my design page which is shown at the end of this posting. I assume the designer is having some difficulty instantiating the dataview for display in the grid. How can I fix that? XAML Code: xmlns:local="clr-namespace:InfoSeeker" <Window.Resources> <ObjectDataProvider x:Key="InfoWorkData" ObjectType="{x:Type local:InfoWorkData}" /> <ObjectDataProvider x:Key="InfoWork" ObjectInstance="{StaticResource InfoWorkData}" MethodName="GetInfoWork" /> </Window.Resources> <my:DataGrid DataContext="{Binding Source={StaticResource InfoWork}}" AutoGenerateColumns="True" ItemsSource="{Binding}" Name="dataGrid1" xmlns:my="http://schemas.microsoft.com/wpf/2008/toolkit" /> C# Code: namespace InfoSeeker { public class InfoWorkData { private InfoTableAdapters.InfoWorkTableAdapter infoAdapter; private Info infoDS; public InfoWorkData() { infoDS = new Info(); infoAdapter = new InfoTableAdapters.InfoWorkTableAdapter(); infoAdapter.Fill(infoDS.InfoWork); } public DataView GetInfoWork() { return infoDS.InfoWork.DefaultView; } } } Error shown in place of the designer page which has the grid on it: An unhandled exception has occurred: Type 'MS.Internal.Permissions.UserInitiatedNavigationPermission' in Assembly 'PresentationFramework, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' is not marked as serializable. at System.Runtime.Serialization.FormatterServices.InternalGetSerializableMembers(RuntimeType type) at System.Runtime.Serialization.FormatterServices.GetSerializableMembers(Type type, StreamingContext context) at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitMemberInfo() at System.Runtime.Serialization.Formatters.Binary.WriteObjectInfo.InitSerialize(Object obj, ISurrogateSelector surrogateSelector, StreamingContext context, SerObjectInfoInit serObjectInfoInit, IFormatterConverter converter, ObjectWriter objectWriter) ...At:Ms.Internal.Designer.DesignerPane.LoadDesignerView()

    Read the article

  • Silverlight data binding to parent user control's properties with using MVVM in both controls

    - by MagicMax
    Hello! I have two UserControls ("UserControlParentView" and "UserControlChildView") with MVVM pattern implemented in both controls. Parent control is a container for Child control and child control's property should be updated by data binding from Parent control in order to show/hide some check box inside Child control. Parent Control Description UserControlParentViewModel has property: private bool isShowCheckbox = false; public bool IsShowCheckbox { get { return isShowCheckbox; } set { isShowCheckbox = value; NotifyPropertyChanged("IsShowCheckbox"); } } UserControlParentViewModel - how I set DataContext of Parent control: public UserControlParentView() { InitializeComponent(); this.DataContext = new UserControlParentViewModel(); } UserControlParentView contains toggle button (in XAML), bound to UserControlParentViewModel's property IsShowCheckbox <ToggleButton Grid.Column="1" IsChecked="{Binding IsShowCheckbox, Mode=TwoWay}"></ToggleButton> Also Parent control contains instance of child element (somewhere in XAML) <local:UserControlChildView IsCheckBoxVisible="{Binding IsShowCheckbox}" ></local:UserControlChildView> so property in child control should be updated when user togggle/untoggle button. Child control contains Boolean property to be updated from parent control, but nothing happened! Breakpoint never fired! Property in UserControlChildView that should be updated from Parent control (here I plan to make chechBox visible/hidden in code behind): public bool IsCheckBoxVisible { get { return (bool)GetValue(IsCheckBoxVisibleProperty); } set { SetValue(IsCheckBoxVisibleProperty, value); } } // Using a DependencyProperty as the backing store for IsCheckBoxVisible. This enables animation, styling, binding, etc... public static readonly DependencyProperty IsCheckBoxVisibleProperty = DependencyProperty.Register("IsCheckBoxVisible", typeof(bool), typeof(TopMenuButton), new PropertyMetadata(false)); So the question is - what I'm doing wrong? Why child's property is never updated? BTW - there is no any binding error warnings in Output window...

    Read the article

  • What is Causing This Memory Leak in Delphi?

    - by lkessler
    I just can't figure out this memory leak that EurekaLog is reporting for my program. I'm using Delphi 2009. Here it is: Memory Leak: Type=Data; Total size=26; Count=1; The stack is: System.pas _UStrSetLength 17477 System.pas _UStrCat 17572 Process.pas InputGedcomFile 1145 That is all there is in the stack. EurekaLog is pointing me to the location where the memory that was not released was first allocated. According to it, the line in my program is line 1145 of InputGedcomFile. That line is: CurStruct0Key := 'HEAD' + Level0Key; where CurStruct0Key and Level0Key are simply defined in the procedure as local variables that should be dynamically handled by the Delphi memory manager when entering and leaving the procedure: var CurStruct0Key, Level0Key: string; So now I look at the _UStrCat procedure in the System Unit. Line 17572 is: CALL _UStrSetLength // Set length of Dest and I go to the _UStrSetLength procedure in the System Unit, and the relevant lines are: @@isUnicode: CMP [EAX-skew].StrRec.refCnt,1 // !!! MT safety JNE @@copyString // not unique, so copy SUB EAX,rOff // Offset EAX "S" to start of memory block ADD EDX,EDX // Double length to get size JO @@overflow ADD EDX,rOff+2 // Add string rec size JO @@overflow PUSH EAX // Put S on stack MOV EAX,ESP // to pass by reference CALL _ReallocMem POP EAX ADD EAX,rOff // Readjust MOV [EBX],EAX // Store MOV [EAX-skew].StrRec.length,ESI MOV WORD PTR [EAX+ESI*2],0 // Null terminate TEST EDI,EDI // Was a temp created? JZ @@exit PUSH EDI MOV EAX,ESP CALL _LStrClr POP EDI JMP @@exit where line 17477 is the "CALL _ReallocMem" line. So then what is the memory leak? Surely a simple concatenate of a string constant to a local string variable should not be causing a memory leak. Why is EurekaLog pointing me to the ReallocMem line in a _UStrSetLength routine that is part of Delphi? This is Delphi 2009 and I am using the new unicode strings. Any help or explanation here will be much appreciated.

    Read the article

  • How do I get Lucene (.NET) to highlight correctly with wildcards?

    - by Scott Stafford
    I am using the Lucene.NET API directly in my ASP.NET/C# web application. When I search using a wildcard, like "fuc*", the highlighter doesn't highlight anything, but when I search for the whole word, like "fuchsia", it highlights fine. Does Lucene have the ability to highlight using the same logic it used to match with? Various maybe-relevant code-snippets below: var formatter = new Lucene.Net.Highlight.SimpleHTMLFormatter( "<span class='srhilite'>", "</span>"); var fragmenter = new Lucene.Net.Highlight.SimpleFragmenter(100); var scorer = new Lucene.Net.Highlight.QueryScorer(query); var highlighter = new Lucene.Net.Highlight.Highlighter(formatter, scorer); highlighter.SetTextFragmenter(fragmenter); and then on each hit... string description = Server.HtmlEncode(doc.Get("Description")); var stream = analyzer.TokenStream("Description", new System.IO.StringReader(description)); string highlighted_text = highlighter.GetBestFragments( stream, description, 1, "..."); And I'm using the QueryParser and the StandardAnalyzer.

    Read the article

  • JSON parsing problem in BlackBerry

    - by anta40
    I'm working on how to parse Twitter's JSON response using JSON-ME. For example: [code] http://apiwiki.twitter.com/Twitter-Search-API-Method:-search foo({"results":[{"profile_image_url":"http://a3.twimg.com/profile_images/762620209/drama_queen-6989_normal.gif","created_at":"Thu, 01 Apr 2010 02:35:10 +0000","from_user":"TWEETSDRAMA","to_user_id":null,"text":"NEW Twitter Lists Widget - How to put it on your blog or site http://bit.ly/47NCi6","id":11401539152,"from_user_id":95081097,"geo":null,"iso_language_code":"en","source":"<a href="http://ping.fm/" rel="nofollow">Ping.fm</a>"}... (content truncated)[/code] Here's my method:[code] public void parseDataFromJSON(String strjson) throws JSONException { JSONTokener jtoken = new JSONTokener(strjson); JSONArray jsoarray = new JSONArray(jtoken); JSONObject jsobj = jsoarray.getJSONObject(0); tweeter_profile_image_url = jsobj.optString("profile_image_url"); tweeter_created_at = jsobj.optString("created_at"); tweeter_from_user = jsobj.optString("from_user"); tweeter_to_user_id = jsobj.optString("to_user_id"); tweeter_text = jsobj.optString("text"); tweeter_id = jsobj.optInt("id"); tweeter_from_user_id = jsobj.optInt("from_user_id"); tweeter_geo = jsobj.optString("geo"); tweeter_iso_language_code = jsobj.optString("iso_language_code"); tweeter_source = jsobj.optString("source") }[/code] When I ran it on the emulator, nothing was shown, so I inspected the debugger, and the output was: status: 200 content: {"results":[{"profile_image_url":"http://a1.twimg.com/profile_images/746683548/Photo_on_2010-..... --- OK, I got the JSON content org.json.me.JSONException: A JSONArray text must start with '[' at character 1 of {"results":[{"profile_image_url.... --- but somehow unable to processed it properly. So how to parse this correctly?

    Read the article

  • Help getting frame rate (fps) up in Python + Pygame

    - by Jordan Magnuson
    I am working on a little card-swapping world-travel game that I sort of envision as a cross between Bejeweled and the 10 Days geography board games. So far the coding has been going okay, but the frame rate is pretty bad... currently I'm getting low 20's on my Core 2 Duo. This is a problem since I'm creating the game for Intel's March developer competition, which is squarely aimed at netbooks packing underpowered Atom processors. Here's a screen from the game: ![www.necessarygames.com/my_games/betraveled/betraveled-fps.png][1] I am very new to Python and Pygame (this is the first thing I've used them for), and am sadly lacking in formal CS training... which is to say that I think there are probably A LOT of bad practices going on in my code, and A LOT that could be optimized. If some of you older Python hands wouldn't mind taking a look at my code and seeing if you can't find any obvious areas for optimization, I would be extremely grateful. You can download the full source code here: http://www.necessarygames.com/my_games/betraveled/betraveled_src0328.zip Compiled exe here: www.necessarygames.com/my_games/betraveled/betraveled_src0328.zip One thing I am concerned about is my event manager, which I feel may have some performance wholes in it, and another thing is my rendering... I'm pretty much just blitting everything to the screen all the time (see the render routines in my game_components.py below); I recently found out that you should only update the areas of the screen that have changed, but I'm still foggy on how that accomplished exactly... could this be a huge performance issue? Any thoughts are much appreciated! As usual, I'm happy to "tip" you for your time and energy via PayPal. Jordan Here are some bits of the source: Main.py #Remote imports import pygame from pygame.locals import * #Local imports import config import rooms from event_manager import * from events import * class RoomController(object): """Controls which room is currently active (eg Title Screen)""" def __init__(self, screen, ev_manager): self.room = None self.screen = screen self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.room = self.set_room(config.room) def set_room(self, room_const): #Unregister old room from ev_manager if self.room: self.room.ev_manager.unregister_listener(self.room) self.room = None #Set new room based on const if room_const == config.TITLE_SCREEN: return rooms.TitleScreen(self.screen, self.ev_manager) elif room_const == config.GAME_MODE_ROOM: return rooms.GameModeRoom(self.screen, self.ev_manager) elif room_const == config.GAME_ROOM: return rooms.GameRoom(self.screen, self.ev_manager) elif room_const == config.HIGH_SCORES_ROOM: return rooms.HighScoresRoom(self.screen, self.ev_manager) def notify(self, event): if isinstance(event, ChangeRoomRequest): if event.game_mode: config.game_mode = event.game_mode self.room = self.set_room(event.new_room) def render(self, surface): self.room.render(surface) #Run game def main(): pygame.init() screen = pygame.display.set_mode(config.screen_size) ev_manager = EventManager() spinner = CPUSpinnerController(ev_manager) room_controller = RoomController(screen, ev_manager) pygame_event_controller = PyGameEventController(ev_manager) spinner.run() # this runs the main function if this script is called to run. # If it is imported as a module, we don't run the main function. if __name__ == "__main__": main() event_manager.py #Remote imports import pygame from pygame.locals import * #Local imports import config from events import * def debug( msg ): print "Debug Message: " + str(msg) class EventManager: #This object is responsible for coordinating most communication #between the Model, View, and Controller. def __init__(self): from weakref import WeakKeyDictionary self.listeners = WeakKeyDictionary() self.eventQueue= [] self.gui_app = None #---------------------------------------------------------------------- def register_listener(self, listener): self.listeners[listener] = 1 #---------------------------------------------------------------------- def unregister_listener(self, listener): if listener in self.listeners: del self.listeners[listener] #---------------------------------------------------------------------- def post(self, event): if isinstance(event, MouseButtonLeftEvent): debug(event.name) #NOTE: copying the list like this before iterating over it, EVERY tick, is highly inefficient, #but currently has to be done because of how new listeners are added to the queue while it is running #(eg when popping cards from a deck). Should be changed. See: http://dr0id.homepage.bluewin.ch/pygame_tutorial08.html #and search for "Watch the iteration" for listener in list(self.listeners): #NOTE: If the weakref has died, it will be #automatically removed, so we don't have #to worry about it. listener.notify(event) #------------------------------------------------------------------------------ class PyGameEventController: """...""" def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.input_freeze = False #---------------------------------------------------------------------- def notify(self, incoming_event): if isinstance(incoming_event, UserInputFreeze): self.input_freeze = True elif isinstance(incoming_event, UserInputUnFreeze): self.input_freeze = False elif isinstance(incoming_event, TickEvent): #Share some time with other processes, so we don't hog the cpu pygame.time.wait(5) #Handle Pygame Events for event in pygame.event.get(): #If this event manager has an associated PGU GUI app, notify it of the event if self.ev_manager.gui_app: self.ev_manager.gui_app.event(event) #Standard event handling for everything else ev = None if event.type == QUIT: ev = QuitEvent() elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 1: #Button 1 pos = pygame.mouse.get_pos() ev = MouseButtonLeftEvent(pos) elif event.type == pygame.MOUSEMOTION: pos = pygame.mouse.get_pos() ev = MouseMoveEvent(pos) #Post event to event manager if ev: self.ev_manager.post(ev) #------------------------------------------------------------------------------ class CPUSpinnerController: def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.clock = pygame.time.Clock() self.cumu_time = 0 self.keep_going = True #---------------------------------------------------------------------- def run(self): if not self.keep_going: raise Exception('dead spinner') while self.keep_going: time_passed = self.clock.tick() fps = self.clock.get_fps() self.cumu_time += time_passed self.ev_manager.post(TickEvent(time_passed, fps)) if self.cumu_time >= 1000: self.cumu_time = 0 self.ev_manager.post(SecondEvent()) pygame.quit() #---------------------------------------------------------------------- def notify(self, event): if isinstance(event, QuitEvent): #this will stop the while loop from running self.keep_going = False rooms.py #Remote imports import pygame #Local imports import config import continents from game_components import * from my_gui import * from pgu import high class Room(object): def __init__(self, screen, ev_manager): self.screen = screen self.ev_manager = ev_manager self.ev_manager.register_listener(self) def notify(self, event): if isinstance(event, TickEvent): pygame.display.set_caption('FPS: ' + str(int(event.fps))) self.render(self.screen) pygame.display.update() def get_highs_table(self): fname = 'high_scores.txt' highs_table = None config.all_highs = high.Highs(fname) if config.game_mode == config.TIME_CHALLENGE: if config.difficulty == config.EASY: highs_table = config.all_highs['time_challenge_easy'] if config.difficulty == config.MED_DIF: highs_table = config.all_highs['time_challenge_med'] if config.difficulty == config.HARD: highs_table = config.all_highs['time_challenge_hard'] if config.difficulty == config.SUPER: highs_table = config.all_highs['time_challenge_super'] elif config.game_mode == config.PLAN_AHEAD: pass return highs_table class TitleScreen(Room): def __init__(self, screen, ev_manager): Room.__init__(self, screen, ev_manager) self.background = pygame.image.load('assets/images/interface/background.jpg').convert() #Initialize #--------------------------------------- self.gui_form = gui.Form() self.gui_app = gui.App(config.gui_theme) self.ev_manager.gui_app = self.gui_app c = gui.Container(align=0,valign=0) #Quit Button #--------------------------------------- b = StartGameButton(ev_manager=self.ev_manager) c.add(b, 0, 0) self.gui_app.init(c) def render(self, surface): surface.blit(self.background, (0, 0)) #GUI self.gui_app.paint(surface) class GameModeRoom(Room): def __init__(self, screen, ev_manager): Room.__init__(self, screen, ev_manager) self.background = pygame.image.load('assets/images/interface/background.jpg').convert() self.create_gui() #Create pgu gui elements def create_gui(self): #Setup #--------------------------------------- self.gui_form = gui.Form() self.gui_app = gui.App(config.gui_theme) self.ev_manager.gui_app = self.gui_app c = gui.Container(align=0,valign=-1) #Mode Relaxed Button #--------------------------------------- b = GameModeRelaxedButton(ev_manager=self.ev_manager) self.b = b print b.rect c.add(b, 0, 200) #Mode Time Challenge Button #--------------------------------------- b = TimeChallengeButton(ev_manager=self.ev_manager) self.b = b print b.rect c.add(b, 0, 250) #Mode Think Ahead Button #--------------------------------------- # b = PlanAheadButton(ev_manager=self.ev_manager) # self.b = b # print b.rect # c.add(b, 0, 300) #Initialize #--------------------------------------- self.gui_app.init(c) def render(self, surface): surface.blit(self.background, (0, 0)) #GUI self.gui_app.paint(surface) class GameRoom(Room): def __init__(self, screen, ev_manager): Room.__init__(self, screen, ev_manager) #Game mode #--------------------------------------- self.new_board_timer = None self.game_mode = config.game_mode config.current_highs = self.get_highs_table() self.highs_dialog = None self.game_over = False #Images #--------------------------------------- self.background = pygame.image.load('assets/images/interface/game screen2-1.jpg').convert() self.logo = pygame.image.load('assets/images/interface/logo_small.png').convert_alpha() self.game_over_text = pygame.image.load('assets/images/interface/text_game_over.png').convert_alpha() self.trip_complete_text = pygame.image.load('assets/images/interface/text_trip_complete.png').convert_alpha() self.zoom_game_over = None self.zoom_trip_complete = None self.fade_out = None #Text #--------------------------------------- self.font = pygame.font.Font(config.font_sans, config.interface_font_size) #Create game components #--------------------------------------- self.continent = self.set_continent(config.continent) self.board = Board(config.board_size, self.ev_manager) self.deck = Deck(self.ev_manager, self.continent) self.map = Map(self.continent) self.longest_trip = 0 #Set pos of game components #--------------------------------------- board_pos = (SCREEN_MARGIN[0], 109) self.board.set_pos(board_pos) map_pos = (config.screen_size[0] - self.map.size[0] - SCREEN_MARGIN[0], 57); self.map.set_pos(map_pos) #Trackers #--------------------------------------- self.game_clock = Chrono(self.ev_manager) self.swap_counter = 0 self.level = 0 #Create gui #--------------------------------------- self.create_gui() #Create initial board #--------------------------------------- self.new_board = self.deck.deal_new_board(self.board) self.ev_manager.post(NewBoardComplete(self.new_board)) def set_continent(self, continent_const): #Set continent based on const if continent_const == config.EUROPE: return continents.Europe() if continent_const == config.AFRICA: return continents.Africa() else: raise Exception('Continent constant not recognized') #Create pgu gui elements def create_gui(self): #Setup #--------------------------------------- self.gui_form = gui.Form() self.gui_app = gui.App(config.gui_theme) self.ev_manager.gui_app = self.gui_app c = gui.Container(align=-1,valign=-1) #Timer Progress bar #--------------------------------------- self.timer_bar = None self.time_increase = None self.minutes_left = None self.seconds_left = None self.timer_text = None if self.game_mode == config.TIME_CHALLENGE: self.time_increase = config.time_challenge_start_time self.timer_bar = gui.ProgressBar(config.time_challenge_start_time,0,config.max_time_bank,width=306) c.add(self.timer_bar, 172, 57) #Connections Progress bar #--------------------------------------- self.connections_bar = None self.connections_bar = gui.ProgressBar(0,0,config.longest_trip_needed,width=306) c.add(self.connections_bar, 172, 83) #Quit Button #--------------------------------------- b = QuitButton(ev_manager=self.ev_manager) c.add(b, 950, 20) #Generate Board Button #--------------------------------------- b = GenerateBoardButton(ev_manager=self.ev_manager, room=self) c.add(b, 500, 20) #Board Size? #--------------------------------------- bs = SetBoardSizeContainer(config.BOARD_LARGE, ev_manager=self.ev_manager, board=self.board) c.add(bs, 640, 20) #Fill Board? #--------------------------------------- t = FillBoardCheckbox(config.fill_board, ev_manager=self.ev_manager) c.add(t, 740, 20) #Darkness? #--------------------------------------- t = UseDarknessCheckbox(config.use_darkness, ev_manager=self.ev_manager) c.add(t, 840, 20) #Initialize #--------------------------------------- self.gui_app.init(c) def advance_level(self): self.level += 1 print 'Advancing to next level' print 'New level: ' + str(self.level) if self.timer_bar: print 'Time increase: ' + str(self.time_increase) self.timer_bar.value += self.time_increase self.time_increase = max(config.min_advance_time, int(self.time_increase * 0.9)) self.board = self.new_board self.new_board = None self.zoom_trip_complete = None self.game_clock.unpause() def notify(self, event): #Tick event if isinstance(event, TickEvent): pygame.display.set_caption('FPS: ' + str(int(event.fps))) self.render(self.screen) pygame.display.update() #Wait to deal new board when advancing levels if self.zoom_trip_complete and self.zoom_trip_complete.finished: self.zoom_trip_complete = None self.ev_manager.post(UnfreezeCards()) self.new_board = self.deck.deal_new_board(self.board) self.ev_manager.post(NewBoardComplete(self.new_board)) #New high score? if self.zoom_game_over and self.zoom_game_over.finished and not self.highs_dialog: if config.current_highs.check(self.level) != None: self.zoom_game_over.visible = False data = 'time:' + str(self.game_clock.time) + ',swaps:' + str(self.swap_counter) self.highs_dialog = HighScoreDialog(score=self.level, data=data, ev_manager=self.ev_manager) self.highs_dialog.open() elif not self.fade_out: self.fade_out = FadeOut(self.ev_manager, config.TITLE_SCREEN) #Second event elif isinstance(event, SecondEvent): if self.timer_bar: if not self.game_clock.paused: self.timer_bar.value -= 1 if self.timer_bar.value <= 0 and not self.game_over: self.ev_manager.post(GameOver()) self.minutes_left = self.timer_bar.value / 60 self.seconds_left = self.timer_bar.value % 60 if self.seconds_left < 10: leading_zero = '0' else: leading_zero = '' self.timer_text = ''.join(['Time Left: ', str(self.minutes_left), ':', leading_zero, str(self.seconds_left)]) #Game over elif isinstance(event, GameOver): self.game_over = True self.zoom_game_over = ZoomImage(self.ev_manager, self.game_over_text) #Trip complete event elif isinstance(event, TripComplete): print 'You did it!' self.game_clock.pause() self.zoom_trip_complete = ZoomImage(self.ev_manager, self.trip_complete_text) self.new_board_timer = Timer(self.ev_manager, 2) self.ev_manager.post(FreezeCards()) print 'Room posted newboardcomplete' #Board Refresh Complete elif isinstance(event, BoardRefreshComplete): if event.board == self.board: print 'Longest trip needed: ' + str(config.longest_trip_needed) print 'Your longest trip: ' + str(self.board.longest_trip) if self.board.longest_trip >= config.longest_trip_needed: self.ev_manager.post(TripComplete()) elif event.board == self.new_board: self.advance_level() self.connections_bar.value = self.board.longest_trip self.connection_text = ' '.join(['Connections:', str(self.board.longest_trip), '/', str(config.longest_trip_needed)]) #CardSwapComplete elif isinstance(event, CardSwapComplete): self.swap_counter += 1 elif isinstance(event, ConfigChangeBoardSize): config.board_size = event.new_size elif isinstance(event, ConfigChangeCardSize): config.card_size = event.new_size elif isinstance(event, ConfigChangeFillBoard): config.fill_board = event.new_value elif isinstance(event, ConfigChangeDarkness): config.use_darkness = event.new_value def render(self, surface): #Background surface.blit(self.background, (0, 0)) #Map self.map.render(surface) #Board self.board.render(surface) #Logo surface.blit(self.logo, (10,10)) #Text connection_text = self.font.render(self.connection_text, True, BLACK) surface.blit(connection_text, (25, 84)) if self.timer_text: timer_text = self.font.render(self.timer_text, True, BLACK) surface.blit(timer_text, (25, 64)) #GUI self.gui_app.paint(surface) if self.zoom_trip_complete: self.zoom_trip_complete.render(surface) if self.zoom_game_over: self.zoom_game_over.render(surface) if self.fade_out: self.fade_out.render(surface) class HighScoresRoom(Room): def __init__(self, screen, ev_manager): Room.__init__(self, screen, ev_manager) self.background = pygame.image.load('assets/images/interface/background.jpg').convert() #Initialize #--------------------------------------- self.gui_app = gui.App(config.gui_theme) self.ev_manager.gui_app = self.gui_app c = gui.Container(align=0,valign=0) #High Scores Table #--------------------------------------- hst = HighScoresTable() c.add(hst, 0, 0) self.gui_app.init(c) def render(self, surface): surface.blit(self.background, (0, 0)) #GUI self.gui_app.paint(surface) game_components.py #Remote imports import pygame from pygame.locals import * import random import operator from copy import copy from math import sqrt, floor #Local imports import config from events import * from matrix import Matrix from textrect import render_textrect, TextRectException from hyphen import hyphenator from textwrap2 import TextWrapper ############################## #CONSTANTS ############################## SCREEN_MARGIN = (10, 10) #Colors BLACK = (0, 0, 0) WHITE = (255, 255, 255) RED = (255, 0, 0) YELLOW = (255, 200, 0) #Directions LEFT = -1 RIGHT = 1 UP = 2 DOWN = -2 #Cards CARD_MARGIN = (10, 10) CARD_PADDING = (2, 2) #Card types BLANK = 0 COUNTRY = 1 TRANSPORT = 2 #Transport types PLANE = 0 TRAIN = 1 CAR = 2 SHIP = 3 class Timer(object): def __init__(self, ev_manager, time_left): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.time_left = time_left self.paused = False def __repr__(self): return str(self.time_left) def pause(self): self.paused = True def unpause(self): self.paused = False def notify(self, event): #Pause Event if isinstance(event, Pause): self.pause() #Unpause Event elif isinstance(event, Unpause): self.unpause() #Second Event elif isinstance(event, SecondEvent): if not self.paused: self.time_left -= 1 class Chrono(object): def __init__(self, ev_manager, start_time=0): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.time = start_time self.paused = False def __repr__(self): return str(self.time_left) def pause(self): self.paused = True def unpause(self): self.paused = False def notify(self, event): #Pause Event if isinstance(event, Pause): self.pause() #Unpause Event elif isinstance(event, Unpause): self.unpause() #Second Event elif isinstance(event, SecondEvent): if not self.paused: self.time += 1 class Map(object): def __init__(self, continent): self.map_image = pygame.image.load(continent.map).convert_alpha() self.map_text = pygame.image.load(continent.map_text).convert_alpha() self.pos = (0, 0) self.set_color() self.map_image = pygame.transform.smoothscale(self.map_image, config.map_size) self.size = self.map_image.get_size() def set_pos(self, pos): self.pos = pos def set_color(self): image_pixel_array = pygame.PixelArray(self.map_image) image_pixel_array.replace(config.GRAY1, config.COLOR1) image_pixel_array.replace(config.GRAY2, config.COLOR2) image_pixel_array.replace(config.GRAY3, config.COLOR3) image_pixel_array.replace(config.GRAY4, config.COLOR4) image_pixel_array.replace(config.GRAY5, config.COLOR5)

    Read the article

  • jQuery jqGrid TreeGrid not functionining properly

    - by Raul Agrait
    Hello. I am having trouble constructing a jqGrid TreeGrid using local data. This method works just fine as a regular grid if you comment out the treeGrid and ExpandColumn attributes, but once you add those to try to make it a tree grid, it doesn't create the tree grid, and it no longer sorts properly. jQuery(function(){ var gridOptions = { datatype: "local", height: 250, colNames: ['Name', 'Type', 'Last Modified On', 'Last Modified By'], colModel: [{name: 'name', index: 'name', width: 200, sorttype: 'text'}, {name: 'type', index: 'type', width: 200, sorttype: 'text'}, {name: 'modifiedon', index: 'modifiedon', width: 200, sorttype: 'date'}, {name: 'modifiedby', index: 'modifiedby', width: 200, sorttype: 'text'}], treeGrid: true, ExpandColumn: 'name', caption: "My Grid" }; jQuery("#treeGrid").jqGrid(gridOptions); var gridData = [ {name: "My File", type: "My File Type", modifiedon: "03/10/2010", modifiedby"Strong Sad", lft: "1", rgt: "8", level: "0"}, {name: "One of Everything", type: "Word Document", modifiedon: "02/12/2009", modifiedby: "Strong Bad", lft: "2", rgt: "5", level: "0"}, {name: "My Presentation", type: "PowerPoint", modifiedon: "01/23/2009", modifiedby: "The Cheat", lft: "3", rgt: "4", level: "0"} ]; for (var i = 0; i < gridData.length; i++) { jQuery("#treeGrid").jqGrid('addRowData', i + 1, gridData[i]); } });

    Read the article

  • Windows Sharepoint Services - FullTextSqlQuery Document library Unable to find items created by SYST

    - by Ashok
    We have created an ASP.NET web app that upload files to WSS Doc Libary. The files get added under 'SYSTEM ACCOUNT' in the library. The FullTextSqlQuery class is used to search the document libary items. But it only searches files that has been uploaded by a windows user account like 'Administrator' and ignores the ones uploaded by 'SYSTEM ACCOUNT'. As a result the search results are empty even though we have the necessary data in the document library. What could be the reason for this? The code is given below: public static List GetListItemsFromFTSQuery(string searchText) { string docLibUrl = "http://localhost:6666/Articles%20Library/Forms/AllItems.aspx"; List items = new List(); DataTable retResults = new DataTable(); SPSecurity.RunWithElevatedPrivileges(delegate { using (SPSite site = new SPSite(docLibUrl)) { SPWeb CRsite = site.OpenWeb(); SPList ContRep = CRsite.GetListFromUrl(docLibUrl); FullTextSqlQuery fts = new FullTextSqlQuery(site); fts.QueryText = "SELECT Title,ContentType,Path FROM portal..scope() WHERE freetext('" + searchText + "') AND (CONTAINS(Path,'\"" + ContRep.RootFolder.ServerRelativeUrl + "\"'))"; fts.ResultTypes = ResultType.RelevantResults; fts.RowLimit = 300; if (SPSecurity.AuthenticationMode != System.Web.Configuration.AuthenticationMode.Windows) fts.AuthenticationType = QueryAuthenticationType.PluggableAuthenticatedQuery; else fts.AuthenticationType = QueryAuthenticationType.NtAuthenticatedQuery; ResultTableCollection rtc = fts.Execute(); if (rtc.Count > 0) { using ( ResultTable relevantResults = rtc[ResultType.RelevantResults]) retResults.Load(relevantResults, LoadOption.OverwriteChanges); foreach (DataRow row in retResults.Rows) { if (!row["Path"].ToString().EndsWith(".aspx")) //if (row["ContentType"].ToString() == "Item") { using ( SPSite lookupSite = new SPSite(row["Path"].ToString())) { using (SPWeb web = lookupSite.OpenWeb()) { SPFile file = web.GetFile(row["Path"].ToString()); items.Add(file.Item); } } } } } } //using ends here }); return items; }

    Read the article

< Previous Page | 565 566 567 568 569 570 571 572 573 574 575 576  | Next Page >