Search Results

Search found 59975 results on 2399 pages for 'data comparison'.

Page 578/2399 | < Previous Page | 574 575 576 577 578 579 580 581 582 583 584 585  | Next Page >

• R selecting duplicate rows

  - by Matt

  Okay, I'm fairly new to R and I've tried to search the documentation for what I need to do but here is the problem. I have a data.frame called heeds.data in the following form (some columns omitted for simplicity) eval.num, eval.count, ... fitness, fitness.mean, green.h.0, green.v.0, offset.0, green.h.1, green.v.1,...green.h.7, green.v.7, offset.7... And I have selected a row meeting the following criteria: best.fitness <- min(heeds.data$fitness.mean[heeds.data$eval.count = 10]) best.row <- heeds.data[heeds.data$fitness.mean == best.fitness] Now, what I want are all of the other rows with that have columns green.h.0 to offset.7 (a contiguous section of columns) equal to the best.row Basically I'm looking for rows that have some of the conditions the same as the "best" row. I thought I could just do this, heeds.best <- heeds.data$fitness[ heeds.data$green.h.0 == best.row$green.h.0 & ... ] But with 24 columns it seems like a stupid method. Looking for something a bit simpler with less manual typing. Thanks!

  Read the article

• How do I format the contents of a DataGrid cell as a Date? as Currency?

  - by Ben McCormack

  I have a Silverlight DataGrid that's being populated with different types of data for each column. I'm trying to figure out how to format some of the contents of the DataGrid's cells, specifically for dates and formatting. I have a date column that's currently displaying like: 3/11/2010 12:00:00 AM. I would rather it display like 3/14/2010. I have a number column that's currently displaying like: 51.32. I'd rather it display as currency like $51.32. I'm not sure how I can go about doing this. I'd prefer to do it in XAML instead of C#, but both solutions are fine. For reference, here's my XAML so far: </data:DataGridTextColumn> <data:DataGridTextColumn Header="Payee" Binding="{Binding Payee}"/> <data:DataGridTextColumn Header="Category" Binding="{Binding Category}"/> <data:DataGridTextColumn Header="Memo" Binding="{Binding Memo}"/> <data:DataGridTextColumn Header="Inflow" Binding="{Binding Inflow}"/> <data:DataGridTextColumn Header="Outflow" Binding="{Binding Outflow}"/> </data:DataGrid.Columns>

  Read the article

• OleDB connection only working when debugging

  - by Francesc

  I have a C# application that connects to a named SQL Express instance on the local machine using OleDBConnection: _connection = new OleDbConnection(_strConn); _connection.Open(); _strConn is something like this: "Provider=sqloledb;Data Source=.\NAMEDINSTANCE;Initial Catalog=dbname;User Id=sa;Password=password;" If I debug the application, the connection works fine. If I run the application from Windows Explorer (the same debug compilation), I get an "OleDBException: Login timeout expired" in the Open() line after 30 seconds. The strange thing is the exception happens even if I attach the debugger to the exe. I can see that the connection string is correct and everything seems fine. I can't fine any extra information in the SQL Express error log or SQL Activity Monitor either. If it helps, here is the exception: System.Data.OleDb.OleDbException: Login timeout expired at System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection) at System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.OleDb.OleDbConnection.Open() I imagine that find the issue with the information I give here might be difficult, but I don't know where else to look or what other tests to do, so any ideas on what it could be or what test I could do to find out will be really appreciated.

  Read the article

• Get count of rows in each table while having more than 1 tables

  - by sneha khan

  I have more then one tables on same page and want to add a line show count of each table as below. I tried something but it gives sum of count of all table rows. <table> <tr> <td>Some data</td> <td>More data</td> </tr> <tr> <td>Some data</td> <td>More data</td> </tr> </table> <table> <tr> <td>Some data</td> <td>More data</td> </tr> <tr> <td>Some data</td> <td>More data</td> </tr> </table> <script type="text/javascript" src="jquery.js"></script> <script type="text/javascript"> $().ready(function(){ //I want to add a line after each table showing each table row count $("table").after(??? + " rows found."); }); </script>

  Read the article

• Please help clean this loop

  - by Alex Angelini

  I do not code much in Javascript, but I have the following snippet which IMHO looks horrendous and I have to do this nested iteration quite often in my code. Does anyone have a prettier/easier to read solution? function addBrowse(data) { var list = $('<ul></ul>') for(i = 0; i < data.list.length; i++) { var file = list.append('<li class="toLeft">' + data.list[i].name + '</li>') for(j = 0; j < data.list[i].children.length; j++) { var db = file.append('<li>' + data.list[i].children[j].name + '</li>') for(k = 0; k < data.list[i].children[j].children.length; k++) db.append('<li class="toRight">' + data.list[i].children[j].children[k].name + '</li>') } } $('#browse').append(list).show()} Here is a sample data element {"file":"","db":"","tbl":"","page":"browse","list":[ { "name":"/home/alex/GoSource/test1.txt", "children":[ { "name":"go", "children":[ { "name":"validation1", "children":[ ] } ] } ] }, { "name":"/home/alex/GoSource/test2.txt", "children":[ { "name":"go", "children":[ { "name":"validation2", "children":[ ] } ] } ] }, { "name":"/home/alex/GoSource/test3.txt", "children":[ { "name":"go", "children":[ { "name":"validation3", "children":[ ] } ] } ] }]} Thanks a lot

  Read the article

• Streaming PDF via invocation of HTTPHandler using $.get into object element

  - by mythicdawn

  What I am trying to do is invoke an HTTPHandler via the $.get method of jQuery which will stream back a PDF and display it in a web page using an object element. My previous method of setting the src attribute of an IFrame to be the result of a handler invocation works, but I would like cross-browser completion notification, so have moved to using $.get(). Sample code: function buttonClick() { $.get("/PDFHandler.ashx", {}, function(data, textStatus, XMLHttpRequest) { var pdfObjectString = "<object data='' type='application/pdf' width='600' height='600'></object>"; var pdfObject = $(pdfObjectString); pdfObject.attr("data", data); $("#container").append(pdfObject); }); As you can see, I am attempting to stick the 'data' variable into an object element. This is not working (no error, PDF just doesn't display), presumably because the data that comes back is binary, yet the attr() method expects a string (I think). My question is thus: how can I invoke an HTTPHandler via $.get and somehow assign the data from the callback to the data attribute of an object?

  Read the article

• Why is Firefox prompting to download a file that is POST'd to?

  - by alex

  This is the most peculiar thing. It is from an old in house CMS. When I attempt to submit my changes, it prompts to save the file linked in the action attribute of the form. Headers Request POST /~site/edit/articles/article_save.php?id=54 HTTP/1.1 Host: example.com User-Agent: Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.6; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-us,en;q=0.5 Accept-Encoding: gzip,deflate Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.7 Keep-Alive: 115 Connection: keep-alive Referer: http://example.com Content-Type: multipart/form-data; boundary=---------------------------10102754414578508781458777923 Content-Length: 940 -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="title" Home Content -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="catid" 18 -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="activecheck" 1 -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="image" -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="contentWidgToolbarSelectBlock" <p> -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="content" <p>Edit your article in this text box.</p> -----------------------------10102754414578508781458777923 Content-Disposition: form-data; name="contentWidgEditor" true -----------------------------10102754414578508781458777923-- Response HTTP/0.9 200 OK And then Firefox shows.... I can't determine from the response headers as to why this is prompting to open/save. It has always worked. All other PHP files on the site work fine. Anyone have a clue? Thanks Update Apparently, it just crashes Safari.

  Read the article

• [AS3] Calling Php Script with UTF-8 POST variables

  - by kornelijepetak

  AS3 documentation says that Strings in AS3 are in UTF-16 format. There is a textbox on a Flash Clip where user can type some data. When a button is clicked, I want this data to be sent to a php script. I have everything set up, but it seems that the PHP script gets the data in UTF-16 format. The data in the database (which is utf-8) shows some unrecognizable characters (where special characters are used), meaning that the data has not been sent in a correct encoding. var variables:URLVariables=new URLVariables; var varSend:URLRequest=new URLRequest("http://website.com/systematic/accept.php"); varSend.method=URLRequestMethod.POST; varSend.data=variables; var varLoader:URLLoader=new URLLoader; varLoader.dataFormat=URLLoaderDataFormat.VARIABLES; varLoader.addEventListener(Event.COMPLETE, completeHandler); When submit button is clicked, the following handler gets executed. function sendData(event:MouseEvent) : void { // i guess here is the problem (tbName.text is UTF-16) variables.name = tbName.text; varLoader.load(varSend); } Is there any way to send the data so that PHP script gets the data in UTF-8 format? (PHP script is retrieving the value using the $_POST['name']).

  Read the article

• Combining JSON Arrays

  - by George

  I have 3 json arrays, each with information listed in the same format: Array: ID: NAME: DATA: ID: NAME: DATA: etc... My goal is to combine all 3 arrays into one array, and sort and display by NAME by passing the 3 arrays into a function. The function I've tried is: JSCRIPT Call: // to save time I'm just passing the name of the array, I've tried passing // the full array name as json[0]['DATA'][array_1][0]['NAME'] as well. combineNames(['array_1','array_2']); FUNCTION: function combineNames(names) { var allNames = [] for (i=0;i<names.length;i++) { for (j=0;j<json[0]['DATA'][names[i]].length;j++) { allNames.push(json[0]['DATA'][names[i]][j]['NAME']); } } return allNames.sort(); } The above gives me the error that NAME is null or undefined. I've also tried using the array.concat function which works when I hard code it: var names = []; var allNames = []; var names = names.concat(json[0]['DATA']['array_1'],json[0]['DATA']['array_2']); for (i=0;i<names.length;i++) { allNames.push(names[i]['NAME']); } return allNames.sort(); But I can't figure out how to pass in the arrays into the function (and if possible I would like to just pass in the array name part instead of the whole json[0]['DATA']['array_name'] like I was trying to do in the first function...

  Read the article

• JQuery Post caused permission denied warning in IE 6 and IE 7

  - by kwokwai

  Hi all, I am using firefox 3 and IE 6, 7 to test if a simple php web page using JQuery Post to pass some data to and from another server web page. $(document).ready(function(){ $("#data\\[User\\]\\[name\\]").click(function(){ var usr=$("#data\\[User\\]\\[name\\]").val(); if(usr.length >= 4){ $("#username").append('<span id="loaderimg" name="loaderimg"><img align="absmiddle" src="loader.gif"/> Checking data availability,&nbsp;please wait.</span>'); var url = "http://mysite.com/site1/toavail/"+usr; $.post( url, function(data) {alert(data);}); }); }); //--> </script> <table border=0 width="100%"> <tr> <td>Username</td> <td> <div id="username"> <input type="text" name="data[User][name]" id="data[User][name]"> </div> </td> </tr> </table> In Firefox 3, the alert box showed empty message. In IE 6 and IE 7, I got an error message saying "Permssion denied"

  Read the article

• unable to return 'true' value in C function

  - by Byron

  If Im trying to check an input 5 byte array (p) against a 5 byte array stored in flash (data), using the following function (e2CheckPINoverride), to simply return either a true or false value. But it seems, no matter what I try, it only returns as 'false'. I call the function here: if (e2CheckPINoverride(pinEntry) == 1){ PTDD_PTDD1 = 1; } else{ PTDD_PTDD1 = 0; } Here is the function: BYTE e2CheckPINoverride(BYTE *p) { BYTE i; BYTE data[5]; if(e2Read(E2_ENABLECODE, data, 5)) { if(data[0] != p[0]) return FALSE; if(data[1] != p[1]) return FALSE; if(data[2] != p[2]) return FALSE; if(data[3] != p[3]) return FALSE; if(data[4] != p[4]) return FALSE; } return TRUE; } I have already assigned true and false in the defines.h file: #ifndef TRUE #define TRUE ((UCHAR)1) #endif #ifndef FALSE #define FALSE ((UCHAR)0) #endif and where typedef unsigned char UCHAR; when i step through the code, it performs all the checks correctly, it passes in the correct value, compares it correctly and then breaks at the correct point, but is unable to process the return value of true? please help?

  Read the article

• C++ socket concurrent server

  - by gregpi

  Hi all; Im writing a concurrent server that's supposed to have a communication channel and a data channel. The client initially connect to the communication channel to authenticate, upon successful authentication, the client is then connected to the data channel to access data. My program is already doing that, and im using threads.My only issue is that if I try to connect another client, I get a "cannot bind : address already in use" error. I have it this way: PART A Client connect to port 4567 (and enter his login info). A thread spawn to handle the client(repeated for each client that connects). In the thread created, I have a function(let's call it FUNC_A) that checks the client's login info(dont worry about how the check is done), if successful, the thread starts the data server(listening on 8976) then sends an OK to the client, once received the client attempts to connect to the data server. PART B Once a client connect to the data server, from inside FUNC_A the client is accepted and another thread is spawn to handle the client's connection to the data server.(hopefully everything is clear). Now, all that is working fine. However, if I try to connect with second client when it gets to PART B I get a "cannot bind error: address already in use". I've tried so many different ways, I've even tried spawning a thread to start the data server and accept the client and then start another thread to handle that connection. still no luck. Please give me a suggestion as to what I'm doing wrong, how do I go about doing this or what's the best way to implement it. Thank you

  Read the article

• object / class methods serialized as well?

  - by Mat90

  I know that data members are saved to disk but I was wondering whether object's/class' methods are saved in binary format as well? Because I found some contradictionary info, for example: Ivor Horton: "Class objects contain function members as well as data members, and all the members, both data and functions, have access specifiers; therefore, to record objects in an external file, the information written to the file must contain complete specifications of all the class structures involved." and: Are methods also serialized along with the data members in .NET? Thus: are method's assembly instructions (opcodes and operands) stored to disk as well? Just like a precompiled LIB or DLL? During the DOS ages I used assembly so now and then. As far as I remember from Delphi and the following site (answer by dan04): Are methods also serialized along with the data members in .NET? sizeof(<OBJECT or CLASS>) will give the size of all data members together (no methods/procedures). Also a nice C example is given there with data and members declared in one class/struct but at runtime these methods are separate procedures acting on a struct of data. However, I think that later class/object implementations like Pascal's VMT may be different in memory.

  Read the article

• Downloading a webpage in C# example

  - by Chris

  I am trying to understand some example code on this web page: (http://www.csharp-station.com/HowTo/HttpWebFetch.aspx) that downloads a file from the internet. The piece of code quoted below goes through a loop getting chunks of data and saving them to a string until all the data has been downloaded. As I understand it, "count" contains the size of the downloaded chunk and the loop runs until count is 0 (an empty chunk of data is downloaded). My question is, isn't it possible that count could be 0 without the file being completely downloaded? Say if the network connection is interrupted, the stream may not have any data to read on a pass of the loop and count should be 0, ending the download prematurely. Or does ResStream.Read stop the program until it gets data? Is this the correct way to save a stream? int count = 0; do { // fill the buffer with data count = resStream.Read(buf, 0, buf.Length); // make sure we read some data if (count != 0) { // translate from bytes to ASCII text tempString = Encoding.ASCII.GetString(buf, 0, count); // continue building the string sb.Append(tempString); } } while (count 0); // any more data to read?

  Read the article

• What is the difference between .get() and .fetch(1)

  - by AutomatedTester

  I have written an app and part of it is uses a URL parser to get certain data in a ReST type manner. So if you put /foo/bar as the path it will find all the bar items and if you put /foo it will return all items below foo So my app has a query like data = Paths.all().filter('path =', self.request.path).get() Which works brilliantly. Now I want to send this to the UI using templates {% for datum in data %} <div class="content"> <h2>{{ datum.title }}</h2> {{ datum.content }} </div> {% endfor %} When I do this I get data is not iterable error. So I updated the Django to {% for datum in data.all %} which now appears to pull more data than I was giving it somehow. It shows all data in the datastore which is not ideal. So I removed the .all from the Django and changed the datastore query to data = Paths.all().filter('path =', self.request.path).fetch(1) which now works as I intended. In the documentation it says The db.get() function fetches an entity from the datastore for a Key (or list of Keys). So my question is why can I iterate over a query when it returns with fetch() but can't with get(). Where has my understanding gone wrong?

  Read the article

• How can i get a file from remote machine?

  - by programmerist

  How can i get a file from remote computer? i know remote computer ip and 51124 port is open. i need this algorith: 1) Connect 192.xxx.x.xxx ip via 51124 port 2) filename:123456 (i want to search it on remote machine) 3) Get File 4) Save C:\ 51124 port is open. can i access and can i search any file according to filename? My code is below: IPEndPoint ipEnd = new IPEndPoint(IPAddress.Any, 51124); Socket sock = new Socket(AddressFamily.InterNetwork, SocketType.Stream, ProtocolType.IP); sock.Bind(ipEnd); sock.Listen(maxConnections); Socket serverSocket = sock.Accept(); byte[] data = new byte[bufferSize]; int received = serverSocket.Receive(data); int filenameLength = BitConverter.ToInt32(data, 0); string filename = Encoding.ASCII.GetString(data, 4, filenameLength); BinaryWriter bWrite = new BinaryWriter(File.Open(outPath + filename, FileMode.Create)); bWrite.Write(data, filenameLength + 4, received - filenameLength - 4); int received2 = serverSocket.Receive(data); while (received2 0) { bWrite.Write(data, 0, received2); received2 = serverSocket.Receive(data); } bWrite.Close(); serverSocket.Close(); sock.Close();

  Read the article

• jquery autosuggest: what is wrong with this code?

  - by Abu Hamzah

  i have been struggling to make it work my autosugest/autocomplete and its acting strange unless i am doing completely silly here. please have a look 1) does not do anything, does not work or nor fire the event. <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.autocomplete.js" type="text/javascript"></script> <form id="form1" runat="server"> <script type="text/javascript"> $(document).ready(function() { $("#<%=txtHost.UniqueID %>").autocomplete("HostService.asmx/GetHosts", { dataType: 'json' , contentType: "application/json; charset=utf-8" , parse: function(data) { var rows = Array(); debugger for (var i = 0; i < data.length; i++) { rows[i] = { data: data[i], value: data[i].LName, result: data[i].LName }; } return rows; } , formatItem: function(row, i, max) { return data.LName + ", " + data.FName; } }); }); </script> 2) this works if i remove the above code and replace with this code: <script type="text/javascript"> $(document).ready(function() { $("#txtHost").autocomplete("lazy blazy crazy daisy maisy ugh".split(" ")); }); </script> any help ?

  Read the article

• Survey statistic diagram ideas

  - by Nort

  Hey everyone, I've got some homework tasks in topic surveys and diagrams. The first task is to normalize the input of a survey, because the structure of the data is changing from time-to-time. So there are three types of surveys: static fields, where text is stored dynamic ones, where the user can select one option and multiselect fields, where the user can select multiple options So I'm not really a statistics guy, so I have really no idea what I can do with that incomming data. So the data I have is stored in an orbital XML file from there I can easily get how man times a survey was filled, and how many times a field was filled, so I can (for eg on a pie chart show the relation of filled or not filled). The second idea is to show the relation between the content of a multi option element using a bar chart or so. In case of the multi option elements I've got the idea to show data in implication of one option. But the question is, what could be shown? The other problem are the static elements (text fields and so). What data could be represented from a single field? The data in the XML field is collected from 2001 to 2005 So maybe I can work with the dates of the surveys, but as I said, i don't really know how to process the data, to collect as much data as possible.

  Read the article

• Update table using SSIS

  - by thursdaysgeek

  I am trying to update a field in a table with data from another table, based on a common key. If it were in straight SQL, it would be something like: Update EHSIT set e.IDMSObjID = s.IDMSObjID from EHSIT e, EHSIDMS s where e.SITENUM = s.SITE_CODE However, the two tables are not in the same database, so I'm trying to use SSIS to do the update. Oh, and the sitenum/site_code are varchar in one and nvarchar in the other, so I'll have to do a data conversion so they'll match. How do I do it? I have a data flow object, with the source as EHSIDMS and the destination as EHSIT. I have a data conversion to convert the unicode to non-unicode. But how do I update based on the match? I've tried with the destination, using a SQL Command as the Data Access mode, but it doesn't appear to have the source table. If I just map the field to be updated, how does it limit it based on fields matching? I'm about to export my source table to Excel or something, and then try inputting from there, although it seems that all that would get me would be to remove the data conversion step. Shouldn't there be an update data task or something? Is it one of those Data Flow transformation tasks, and I'm just not figuring out which it is?

  Read the article

• if statement inside array : codeigniter

  - by ahmad

  Hello , I have this function to edit all fields that come from the form and its works fine .. function editRow($tableName,$id) { $fieldsData = $this->db->field_data($tableName); $data = array(); foreach ($fieldsData as $key => $field) { $data[ $field->name ] = $this->input->post($field->name); } $this->db->where('id', $id); $this->db->update($tableName, $data); } now I want to add a condition for Password field , if the field is empty keep the old password , I did some thing like that : function editRow($tableName,$id) { $fieldsData = $this->db->field_data($tableName); $data = array(); foreach ($fieldsData as $key => $field) { if ($data[ $field->name ] == 'password' && $this->input->post('password') == '' ) { $data[ 'password' ] => $this->input->post('hide_password'), //'password' => $this->input->post('hide_password'), } else { $data[ $field->name ] => $this->input->post($field->name) } } $this->db->where('id', $id); $this->db->update($tableName, $data); } but I get error ( Parse error: syntax error, unexpected T_DOUBLE_ARROW in ... ) Html , some thing like this : <input type="text" name="password" value=""> <input type="hidden" name="hide_password" value="$row->$password" /> umm , any help ? thanks ..

  Read the article

• Getting JSON object from php authentication objective c

  - by iError

  I am trying to authenticate using the below code NSString *urlAsString =[NSString stringWithFormat:@"http://www.myurl.com/abc/authenticate.php"]; NSURL *url = [NSURL URLWithString:urlAsString]; NSMutableURLRequest *urlRequest = [NSMutableURLRequest requestWithURL:url]; [urlRequest setTimeoutInterval:30.0f]; [urlRequest setHTTPMethod:@"POST"]; [urlRequest addValue:@"test" forHTTPHeaderField:@"m_username" ]; [urlRequest addValue:@"123" forHTTPHeaderField:@"m_password" ]; [[NSURLConnection alloc] initWithRequest:urlRequest delegate:self]; NSOperationQueue *queue = [[NSOperationQueue alloc] init]; [NSURLConnection sendAsynchronousRequest:urlRequest queue:queue completionHandler:^(NSURLResponse *response,NSData *data, NSError *error) { if ([data length] >0 && error == nil){ html = [[NSString alloc] initWithData:data encoding:NSUTF8StringEncoding]; NSLog(@"HTML = %@", html); receivedData = [NSMutableData data]; } else if ([data length] == 0 && error == nil){ NSLog(@"Nothing was downloaded."); } else if (error != nil){ NSLog(@"Error happened = %@", error); } }]; // Start loading data NSURLConnection *theConnection = [[NSURLConnection alloc] initWithRequest:urlRequest delegate:self]; if (theConnection) { // Create the NSMutableData to hold the received data receivedData = [NSMutableData data]; } else { // Inform the user the connection failed. } My username password is correct, I think I am not making the proper call thats why I dont get the desired results and the web service is receiving the null parameters. What can be the issue? Any help appreciated.

  Read the article

• codeigniter populate form from database

  - by Delirium tremens

  In the controller, I have... function update($id = null) { $this->load->database(); // more code $data = array(); $data = $this->db->get_where( 'users', array( 'id' => $id ) ); $data = $data->result_array(); $data = $data[0]; // more code $this->load->view('update', $data); } In the view, I have... <h5>Username</h5> <input type="text" name="username" value="<?php echo set_value('username'); ?>" size="50" /> <h5>Email</h5> <input type="text" name="email" value="<?php echo set_value('email'); ?>" size="50" /> <h5>Email Confirmation</h5> <input type="text" name="emailconf" value="<?php echo set_value('emailconf'); ?>" size="50" /> <h5>Password</h5> <input type="text" name="password" value="<?php echo set_value('password'); ?>" size="50" /> <h5>Password Confirmation</h5> <input type="text" name="passconf" value="<?php echo set_value('passconf'); ?>" size="50" /> set_value() isn't reading $data search for value="" at http://codeigniter.com/forums/viewthread/103837/ The poster uses only the set_value() function between "" in value="". I'm wondering how to do the same, but I can't get it to work. Help?

  Read the article

• Javascript autocomplete function href

  - by user896692

  I´ve the following javascript-function: <script type="text/javascript"> $(function() { var data = (<?php include("php/search_new.php"); ?>).Data.Recipes; var source = []; for (var i in data) { source.push({"href": "/php/get_recipe_byID.php?id=" + data[i].ID, "label": data[i].TITLE}); } $("#searchrecipes").autocomplete({ minLength: 3, source: source, select: function(event, ui) { window.location.href = ui.item.href; } }); }); </script> <input id="searchrecipes" type="text" name="searchrecipes" style="margin-left: 850px; margin-top: 0px; width:170px; background: #fff url(images/search_icon.png) no-repeat 100%;" onblur="this.style.background='#ffffff'; background: #fff url(images/search_icon.png) no-repeat 100%;" onfocus="this.style.background='#c40606'; background: url(images/search_icon.png) no-repeat 100%;" placeholder="Suchen..."></input> <input type="submit" name="buttonsenden" style="display:none;" value="" width: 5px></input> The function has already worked but suddenly it stopped working. The problem is, that the href on the dropdown-autocomplete isn´t clickable. var data = ({"Data":{"Recipes":{"Recipe_5":{"ID":"5","TITLE":"Spaghetti Bolognese"},"Recipe_7":{"ID":"7","TITLE":"Wurstel"},"Recipe_9":{"ID":"9","TITLE":"Schnitzel"},"Recipe_10":{"ID":"10","TITLE":null},"Recipe_19":{"ID":"19","TITLE":null},"Recipe_20":{"ID":"20","TITLE":"Hundefutter"},"Recipe_26":{"ID":"26","TITLE":"Apfelstrudel"},"Recipe_37":{"ID":"37","TITLE":null},"Recipe_38":{"ID":"38","TITLE":"AENDERUNG"},"Recipe_39":{"ID":"39","TITLE":null},"Recipe_40":{"ID":"40","TITLE":"Schnitzel"},"Recipe_42":{"ID":"42","TITLE":"Release-Test"},"Recipe_43":{"ID":"43","TITLE":"Wurstel2"}}},"Message":null,"Code":200}).Data.Recipes; All the necessary jquery scripts are available. What can be the problem?

  Read the article

• Redirect in codeigniter after login

  - by edelweiss

  Trying to do a redirect after a successful login. The login info is sent using ajax to the controller. My controller code as below public function login_controller_function() { $this->load->model('login_model'); if ($this->input->is_ajax_request()) { $user_name=$this->input->post('username'); $user_password = $this->input->post('password'); $this->load->helper('url'); $result = $this->login_model->verify_user($user_name,$user_password); // echo 'user_logged_in'; if(strcmp($result,'user_logged_in')==0) { redirect('welcome'); } } } But it is not working at all. Anyone knows whats wrong? Hi my html as requested. i am using twitter bootstrap as well <li class="divider-vertical"></li> <li><a href="#" id="login_btn">Login</a></li> <li><a href="<?php echo base_url('register'); ?>">Register</a></li> for the buttons so when i click the login button, a modal window will appear and ask for login info. so when i click on the login button, my js code will send an ajax request my js code as below /*Attempt register user jquery ajax*/ $('#login').click(function(){ var user_name = $('#loginHere').find('#user_name').val(); var user_password = $('#loginHere').find('#login_pwd').val(); if(user_name==""||user_password=="") return; var login_data = { username:user_name, password:user_password}; $.ajax({ type: "POST", dataType: "json", async: false, url:"login_register/login_controller_function", data: login_data, success: function(data) { if(data.login) { alert(data.redirect); window.location.replace(data.redirect); } else if(!data.login) { alert('data login not true'); } }, error:function(data){ alert('ajax error'); } }); }); });

  Read the article

• Creating an adjacency List for DFS

  - by user200081

  I'm having trouble creating a Depth First Search for my program. So far I have a class of edges and a class of regions. I want to store all the connected edges inside one node of my region. I can tell if something is connected by the getKey() function I have already implemented. If two edges have the same key, then they are connected. For the next region, I want to store another set of connected edges inside that region, etc etc. However, I am not fully understanding DFS and I'm having some trouble implementing it. I'm not sure when/where to call DFS again. Any help would be appreciated! class edge { private: int source, destination, length; int key; edge *next; public: getKey(){ return key; } } class region { edge *data; edge *next; region() { data = new edge(); next = NULL; } }; void runDFS(int i, edge **edge, int a) { region *head = new region(); aa[i]->visited == true;//mark the first vertex as true for(int v = 0; v < a; v++) { if(tem->edge[i].getKey() == tem->edge[v].getKey()) //if the edges of the vertex have the same root { if(head->data == NULL) { head->data = aa[i]; head->data->next == NULL; } //create an edge if(head->data) { head->data->next = aa[i]; head->data->next->next == NULL; }//if there is already a node connected to ti } if(aa[v]->visited == false) runDFS(v, edge, a); //call the DFS again } //for loop }

  Read the article

< Previous Page | 574 575 576 577 578 579 580 581 582 583 584 585  | Next Page >