Search Results

Search found 6301 results on 253 pages for 'dos commands'.

Page 58/253 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Directly accessing the modem in Windows Mobile

  - by kigurai

  For some reasons I need to be able to access the internal modem of a Windows Mobile smartphone (a HTC s740 with WM version 6.1). What I want is to be able to access it like it was a serial port in order to give AT-commands. I have code that uses the TAPI Line interface and lineGetID() to get a "handle" on which I shuld be able to do ReadFile()/WriteFile(). Sadly I have not gotten it to work. What I do currently is: Initialize TAPI with lineInitializeEx() Open the Line with lineOpen() Iterate through each available device and get info. Currently I am selecting the "UNIMODEM"/"Hayes compatible on COM1" device. But maybe I should choose the "TAPI cellular service"/"Cellular Line" instead? I have tried the "Cellular Line" device with the same result. Use lineGetID() on the selected device to get a handle. Do WriteFile("AT\r") and then directly do a ReadFile(), which should give me a "OK" back if it really was the modem I accessed. Realize that it doesn't work and get annoyed... But this has so far been a no-go. Does anyone have any idea on how to do it? I am doing this in Native WIN32 C++ on Windows Mobile 6 SDK. UPDATE: I have so far managed to get a data connection between two phones using RIL, which gives me a serial port handle to write and read from. BUT, I still would like to be able to interact directly with the modem to send AT-commands. So, the bounty I am starting only concerns getting direct access to the modem in order to give AT-commands. My investigations so far indicates that this was possible in previous versions of Windows Mobile (by opening COM2 and/or COM9 and slaying RIL, or something like that) but I have not yet seen code which works on WM6.

  Read the article

• PHP execute command as subcommand

  - by Thomaschaaf

  I have the following 2 files and am executing them on linux (debian). File1.php <?php exec("php -f file2.php > /dev/null 2>&1 &"); sleep(100); File2.php <?php exec("sleep 30 > /dev/null 2>&1 &"); exec("sleep 30 > /dev/null 2>&1 &"); sleep(100); The way it currently is it first starts file1.php and fires up file2.php and immediatly begins the sleep commands. It does not wait for the first sleep to finish to continue. The problem is that the file2.php and sleep commands are not subcommands of file1.php and I can't simply kill it to kill all subcommands. My htop looks like this: http://dl.getdropbox.com/u/5910/Jing/2011-01-13_1611.png I am searching for a way to have the commands be subcommands of file1.php so that I can easily kill them all :) what I have: '- php -f file2.php '-sleep 30 '-sleep 30 '- php -f file1.php basically I want this: '- php -f file1.php '- php -f file2.php '-sleep 30 '-sleep 30

  Read the article

• .NET Speech recognition plugin Runtime Error: Unhandled Exception. What could possibly cause it?

  - by manuel

  I'm writing a plugin (dll file) for speech recognition, and I'm creating a WinForm as its interface/dialog. When I run the plugin and click the 'Speak' to start the initialization, I get an unhandled exception. Here is a piece of the code: public ref class Dialog : public System::Windows::Forms::Form { public: SpeechRecognitionEngine^ sre; private: System::Void btnSpeak_Click(System::Object^ sender, System::EventArgs^ e) { Initialize(); } protected: void Initialize() { if (System::Threading::Thread::CurrentThread->GetApartmentState() != System::Threading::ApartmentState::STA) { throw gcnew InvalidOperationException("UI thread required"); } //create the recognition engine sre = gcnew SpeechRecognitionEngine(); //set our recognition engine to use the default audio device sre->SetInputToDefaultAudioDevice(); //create a new GrammarBuilder to specify which commands we want to use GrammarBuilder^ grammarBuilder = gcnew GrammarBuilder(); //append all the choices we want for commands. //we want to be able to move, stop, quit the game, and check for the cake. grammarBuilder->Append(gcnew Choices("play", "stop")); //create the Grammar from th GrammarBuilder Grammar^ customGrammar = gcnew Grammar(grammarBuilder); //unload any grammars from the recognition engine sre->UnloadAllGrammars(); //load our new Grammar sre->LoadGrammar(customGrammar); //add an event handler so we get events whenever the engine recognizes spoken commands sre->SpeechRecognized += gcnew EventHandler<SpeechRecognizedEventArgs^> (this, &Dialog::sre_SpeechRecognized); //set the recognition engine to keep running after recognizing a command. //if we had used RecognizeMode.Single, the engine would quite listening after //the first recognized command. sre->RecognizeAsync(RecognizeMode::Multiple); //this->init(); } void sre_SpeechRecognized(Object^ sender, SpeechRecognizedEventArgs^ e) { //simple check to see what the result of the recognition was if (e->Result->Text == "play") { MessageBox(plugin.hwndParent, L"play", 0, 0); } if (e->Result->Text == "stop") { MessageBox(plugin.hwndParent, L"stop", 0, 0); } } };

  Read the article

• Error setting env thru subprocess.call to run a python script on a remote linux machine

  - by John Smith

  I am running a python script on a windows machine to invoke another python script on a remote linux machine. I am using subprocess.call with ssh to do this, like below: subprocess.call('ssh -i <identify file> username@hostname python <script_on_linux_machine>') and this works fine. However, if I want to set some environment variables, like below: subprocess.call('ssh -i <identify file> username@hostname python <script_on_linux_machine>', env={key1:value1}) it fails. I get the following error: ssh_connect: getnameinfo failed ssh: connect to host <hostname> port 22: Operation not permitted 255 I've tried splitting the ssh commands into list and passing. Didn't help. I've tried to run other 'local'(windows) commands thru subprocess.call() and tried setting the env. It works fine. I've tried to run other commands(such as ls) on the remote linux machine. Again, subprocess.call() works fine, as long as I don't try to set the environment. What am I doing wrong? Would I be able to set the environment for a python script on a remote machine? Any help will be appreciated.

  Read the article

• Creating a simple command line interface (CLI) using a python server (TCP sock) and few scripts

  - by VN44CA

  I have a Linux box and I want to be able to telnet into it (port 77557) and run few required commands without having to access to the whole Linux box. So, I have a server listening on that port, and echos the entered command on the screen. (for now) Telnet 192.168.1.100 77557 Trying 192.168.1.100... Connected to 192.168.1.100. Escape character is '^]'. hello<br /> You typed: "hello"<br /> NOW: I want to create lot of commands that each take some args and have error codes. Anyone has done this before? It would be great if I can have the server upon initialization go through each directory and execute the init.py file and in turn, the init.py file of each command call into a main template lib API (e.g. RegisterMe()) and register themselves with the server as function call backs. At least this is how I would do it in C/C++. But I want the best Pythonic way of doing this. /cmd/ /cmd/myreboot/ /cmd/myreboot/ini.py (note underscore don't show for some reason) /cmd/mylist/ /cmd/mylist/init.py ... etc IN: /cmd/myreboot/_ini_.py: from myMainCommand import RegisterMe RegisterMe(name="reboot",args=Arglist, usage="Use this to reboot the box", desc="blabla") So, repeating this creates a list of commands and when you enter the command in the telnet session, then the server goes through the list, matches the command and passed the args to that command and the command does the job and print the success or failure to stdout. Thx

  Read the article

• architecture and tools for a remote control application?

  - by slothbear

  I'm working on the design of a remote control application. From my iPhone or a web browser, I'll send a few commands. Soon my home computer will perform the commands and send back results. I know there are remote desktop apps, but I want something programmable, something simpler, and something that I wrote. My current direction is to use Amazon Simple Queue Service (SQS) as the message bus. The iPhone places some messages in a queue. My local Java/JRuby program notices the messages on the queue, performs the work and sends back status via a different queue. This will be a very low-volume application. At $1.00 for a million requests (plus a handful of data transfer charges), Amazon SQS looks a lot more affordable than having my own server of any type. And super reliable, that's important for me too. Are there better/standard toolkits or architectures for this kind of remote control? Cost is not a big issue, but I prefer the tons I learn by doing it myself. I'm moderately concerned about security, but doubt it will be a problem. The list of commands recognized will be very short, and only recognized in specific contexts. No "erase hard drive" stuff. update: I'll probably distribute these programs to some other people who want the same function, but who don't have Amazon SQS accounts. For now, they'll use anonymous access to my queues, with random 80-character queue names.

  Read the article

• What does "Value does not fall within expected range" mean in runtime error?

  - by manuel

  Hi, I'm writing a plugin (dll file) using /clr and trying to implement speech recognition using .NET. But when I run it, I got a runtime error saying "Value does not fall within expected range", what does the message mean? public ref class Dialog : public System::Windows::Forms::Form { public: SpeechRecognitionEngine^ sre; private: System::Void btnSpeak_Click(System::Object^ sender, System::EventArgs^ e) { Initialize(); } protected: void Initialize() { //create the recognition engine sre = gcnew SpeechRecognitionEngine(); //set our recognition engine to use the default audio device sre->SetInputToDefaultAudioDevice(); //create a new GrammarBuilder to specify which commands we want to use GrammarBuilder^ grammarBuilder = gcnew GrammarBuilder(); //append all the choices we want for commands. //we want to be able to move, stop, quit the game, and check for the cake. grammarBuilder->Append(gcnew Choices("play", "stop")); //create the Grammar from th GrammarBuilder Grammar^ customGrammar = gcnew Grammar(grammarBuilder); //unload any grammars from the recognition engine sre->UnloadAllGrammars(); //load our new Grammar sre->LoadGrammar(customGrammar); //add an event handler so we get events whenever the engine recognizes spoken commands sre->SpeechRecognized += gcnew EventHandler<SpeechRecognizedEventArgs^> (this, &Dialog::sre_SpeechRecognized); //set the recognition engine to keep running after recognizing a command. //if we had used RecognizeMode.Single, the engine would quite listening after //the first recognized command. sre->RecognizeAsync(RecognizeMode::Multiple); //this->init(); } void sre_SpeechRecognized(Object^ sender, SpeechRecognizedEventArgs^ e) { //simple check to see what the result of the recognition was if (e->Result->Text == "play") { MessageBox(plugin.hwndParent, L"play", 0, 0); } if (e->Result->Text == "stop") { MessageBox(plugin.hwndParent, L"stop", 0, 0); } } };

  Read the article

• Undefined method for a belongs_to association

  - by marimaf

  My code: class User < ActiveRecord::Base belongs_to :university end class University < ActiveRecord::Base has_many :users, dependent: :destroy end and my model User has a university_id attribute. If I do University.find(1).users I get the list of users, but if I do User.find(1).university (and I checked that university_id is not nil here) I get: NoMethodError: undefined method `university' for from /home/mari/.rvm/gems/ruby-1.9.2-p290/gems/activemodel-3.0.10/lib/active_model/attribute_methods.rb :392:in `method_missing' from /home/mari/.rvm/gems/ruby-1.9.2-p290/gems/activerecord-3.0.10/lib/active_record/attribute_methods. rb:46:in `method_missing' from (irb):14 from /home/mari/.rvm/gems/ruby-1.9.2-p290/gems/railties-3.0.10/lib/rails/commands/console.rb:44:in sta rt' from /home/mari/.rvm/gems/ruby-1.9.2-p290/gems/railties-3.0.10/lib/rails/commands/console.rb:8:in star t' from /home/mari/.rvm/gems/ruby-1.9.2-p290/gems/railties-3.0.10/lib/rails/commands.rb:23:in <top (requi red)>' from script/rails:6:inrequire' from script/rails:6:in `' What am I doing wrong? I have another models and they are working just fine. Any suggestions? Thanks in advance

  Read the article

• .net remoting - Better solution to wait for a service to initialize ?

  - by CitizenInsane

  Context I have a client application (which i cannot modify, i.e. i only have the binary) that needs to run from time to time external commands that depends on a resource which is very long to initialize (about 20s). I thus decided to initialize this resource once for all in a "CommandServer.exe" application (single instance in the system tray) and let my client application call an intermediate "ExecuteCommand.exe" program that uses .net remoting to perform the operation on the server. The "ExecuteCommand.exe" is in charge for starting the server on first call and then leave it alive to speed up further commands. The service: public interface IMyService { void ExecuteCommand(string[] args); } The "CommandServer.exe" (using WindowsFormsApplicationBase for single instance management + user friendly splash screen during resource initializations): private void onStartupFirstInstance(object sender, StartupEventArgs e) { // Register communication channel channel = new TcpServerChannel("CommandServerChannel", 8234); ChannelServices.RegisterChannel(channel, false); // Register service var resource = veryLongToInitialize(); service = new MyServiceImpl(resource); RemotingServices.Marshal(service, "CommandServer"); // Create icon in system tray notifyIcon = new NotifyIcon(); ... } The intermediate "ExecuteCommand.exe": static void Main(string[] args) { startCommandServerIfRequired(); var channel = new TcpClientChannel(); ChannelServices.RegisterChannel(channel, false); var service = (IMyService)Activator.GetObject(typeof(IMyService), "tcp://localhost:8234/CommandServer"); service.RunCommand(args); } Problem As the server is very long to start (about 20s to initialize the required resources), the "ExecuteCommand.exe" fails on service.RunCommand(args) line because the server is yet not available. Question Is there a elegant way I can tune the delay before to receive "service not available" when calling service.RunCommand ? NB1: Currently I'm working around the issue by adding a mutex in server to indicate for complete initiliazation and have "ExecuteCommand.exe" to wait for this mutex before to call service.RunCommand. NB2: I have no background with .net remoting, nor WCF which is recommended replacer. (I chose .net remoting because this looked easier to set-up for this single shot issue in running external commands).

  Read the article

• WPF Calling a custom command on a custom control (from a viewmodel?)

  - by user190615

  I want to take a snap of the visual tree of a custom wpf control when the user clicks a button in a toolbar. The control is bound to a viewmodel. I have a BitmapSource dp in the custom control holding the snapped image which is bound to a property on my VM. The BitmapSource dp on the control is updated via a custom command on the control. I've tied the toolbar button's command to call the controls command which updates the BitmapSource. Now the problem is the end result I want is when the user clicks the button, the control updates its image and then the vm offers to save this image. I cant wrap my mind around an mvvm way of doing this. One inelegant solution is that control fires an event after the image is updated which is routed to the viewmodel as a command(command behavior) but then if i want to do something else with the image on some other button click, all the commands bound to the events will fire. All thoughts appreciated. EDIT The command on the control is a RoutedCommand and the commands in my vm are Prism delegate commands.

  Read the article

• Is it wrong for a context (right click) menu be the only way a user can perform a certain task?

  - by Eric

  I'd like to know if it ever makes sense to provide some functionality in a piece of software that is only available to the user through a context (right click) menu. It seems that in most software I've worked with the right click menu is always used as a quick way to get to features that are otherwise available from other buttons or menus. Below is a screen shot of the UI I'm developing. The tree view on the right shows the user's library of catalogs. Users can create new catalogs, or add and remove existing catalogs to and from their library. Catalogs in their library can then be opened or closed, or set to read-only. The screen shot shows the context menu I've created for the browser. Some commands can be executed independently from any specific catalog (New, Add). Yet the other commands must be applied to a specifically selected catalog (Close, Open, Remove, ReadOnly, Refresh, Clean UP, Rename). Currently the "Catalog" menu at the top of the window looks identical to this context menu. Yet I think this may be confusing to the users as the tree view which shows the currently selected catalog may not always be visible. The user may have switched to the Search or Filters tab, or the left pane may be hidden entirely. However, I'm hesitant to change the UI so that the commands that depends on a specifically selected catalog are only available through the context menu.

  Read the article

• CVSROOT problem because of username string

  - by jatanp

  Hi, I have always been SVN user but currently I have to use CVS as the source repository. I am quite new to CVS and really got confused many a times (reason being I always tried to access CVS like SVN !) However now I am really stuck in one problem wherein I am not able to do any cvs operations through cygwin. Actually I have checked out the code using WinCVS and while doing that it created the CVSROOT as following, :pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository However whenever I try to use cvs command in cygwin (after setting CVSROOT variable using export) it fails with following error: cvs update: Unknown option (`username') in CVSROOT. cvs update: in directory .: cvs update: ignoring CVS/Root because it does not contain a valid root. cvs update: Unknown option (`username') in CVSROOT. cvs [update aborted]: Bad CVSROOT: `:pserver;username=<user_name>;password=<pwd>:<serverip>:/cvs/repository'. However the command works fine, if invoked through dos command prompt. I got to know that on DOS prompt, cvs command is provided by CVSNT whereas in cygwin it's some different package. Please let me know where I have made a mistake and how it can be corrected ! I need cvs to work inside cygwin for some scripting purpose.

  Read the article

• How to add a Linux Partition on FreeBSD

  - by Ömer

  Today I installed FreeBSD 9.0 PPC on my Mac mini G4 with 40GB HDD. During installation, (using the FSBD utility 'gpart') I have allocated a total of about 23GB for FreeBSD leaving 17GB totally free (neither partitioned, nor formatted) for a later Linux installation. Now, when try to install Linux (Ubuntu 10.10 PPC) on the remaining 17GB, the Linux/Ubuntu installer (or Linux's Disk Utility for the same matter) wants presumably a linux partition and when I try to add a (Linux) partition on that area using Linux DU it fails with this message: Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/hda, start=23363101696, size=16644660224, type= Entering MS-DOS parser (offset=0, size=40007761920) No MSDOS_MAGIC found Exiting MS-DOS parser Entering Apple parser Mac MAGIC found, block_size=512 map_count = 17 Leaving Apple parser Apple partition table detected containing partition table scheme = 2 got it Error: The partition's data region doesn't occupy the entire partition. ped_disk_new() failed Now, I'm trying to add a Linux partition on FreeBSD running on the harddisk. I use seemingly most suitable tool for this job: gpart. Here is the 'gpart show ad0' But it seems unable to add a Linux partition because "man gpart" doesn't list either "Linux Partition" nor anything like Ext2 or Ext3/Ext4. The closest thing to Linux Partition in gpart is "mbr" but it doesn't work: #gpart add -t mbr ado So, how to add properly a Linux Partition on FreeBSD? Thanks.

  Read the article

• CentOS security for lazy admins

  - by Robby75

  I'm running CentOS 5.5 (basic LAMP with Parallels Power Panel and Plesk) and have thus far neglected security (because it's not my full-time job, there is always something more important on my todo-list). My server does not contain any secret data and also no lives depend on it - Basically what I want is to make sure it does not become part of a botnet, that is "good enough" security in my case. Anyway, I don't want to become a full-time paranoid admin (like constantly watching and patching everything because of some obscure problem), I also don't care about most security problems like DOS attacks or problems that only exist when using some arcane settings. I'm in search of a "happy medium", for example a list of known important problems in the default installation of CentOS 5.5 and/or a list of security problems that have actually been exploited - not the typical endless list of buffer overflows that "maybe" a problem in some special case. The problem that I have with the usually recommended approaches (joining mailing lists, etc.) is that the really important problems (something where an exploit exists, that is exploitable in a common setup and where the attacker can do something really useful - i.e. not a DOS) are completely and utterly swamped by millions of tiny security alerts that surely are important for high-security servers, but not for me. Thanks for all suggestions!

  Read the article

• Concerns about Apache per-Vhost logging setup

  - by etienne

  I'm both senior developer and sysadmin in my company, so i'm trying to deal with the needs of both activities. I've set up our apache box, wich deals with 30-50 domains atm (and hopefully will grow larger) and hosts both production and development sites, with this directory structure: domains/ domains/domain.ext/ #FTPS chroot for user domain.ext domains/domain.ext/public #the DocumentRoot of http://domain.ext domains/domain.ext/logs domains/domain.ext/subdomains/sub.domain.ext domains/domain.ext/subdomains/sub.domain.ext/public #DocumentRoot of http://sub.domain.ext Each domain.ext Vhost runs with his dedicated user and group via mpm-itk, umask being 027, and the logs are stored via a piped sudo command, like this: ErrorLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_error.log" CustomLog "| /usr/bin/sudo -u nobody -g domain.ext tee -a domains/domain.ext/logs/sub.domain.ext_access.log" combined Now, i've read a lot about not letting the logs out of a very restricted directory, but the developers often need to give a quick look to a particular subdomain error log, and i don't really want to give them admin rights to look into /var/logs. Having them available into the ftp account is REALLY handy during development stages. Do you think this setup is viable and safe enough? To me it is apparently looking good, but i'm concerned about 3 security issues: -is the sudo pipe enough to deal with symlink exploits? Any catches i'm missing? -log dos: logs are in the same partition of all domains. got hundreds of gigs, but still, if one get disk-space dos'd, everything will break. Any workaround? Will a short timed logrotate suffice? -file descriptors limits: AFAIK the default limit for Apache on Ubuntu Server is currently 8192, which should be plenty enough to handle 2 log files per subdomain. Is it? Am i missing something? I hope to read some thoughts on the matter!

  Read the article

• Need to boot into chkdsk from USB on Windows netbook

  - by Gaz Davidson

  While attempting to install Ubuntu on a 32-bit Windows XP netbook, the partition resize operation failed due to inconsistencies in the NTFS filesystem (lesson learned: run chkdsk /f in Windows before trying to resize a partition in Linux). Now the installer only gives the option to replace Windows with Ubuntu, the partition can't be resized in gparted, which displays a red exclamation mark and an error log when you click it. To make matters worse, we're also unable to reboot into Windows to get at chkdsk. We get a BSoD when choosing any of the options (including the DOS recovery console thing). The netbook has no CD-ROM drive, contains no recovery image and our only connection to the Internet is via the hotspot on my mobile device. We don't have Windows recovery CDs, but we do have a USB flash drive. We have a 64-bit laptop running Ubuntu 12.04 and Windows 7 (both 64-bit). So, on to the question: Is anyone aware of a way to get into a DOS recovery console and run chkdsk from a USB disk drive, without having to pirate Windows XP or download hundreds and hundreds of megabytes of crap? If it was my device I'd just flatten it, but it isn't. Please help!

  Read the article

• Using Varnish (only) for DDoS mitigation

  - by Martin Kanters

  My VPS is suffering from a (D)DoS doing a SYN flood with spoofed IPs. I'm right now searching from ways how to be able to defend (at least a bit) against it. It's running a DirectAdmin apache2 webserver. Mainly used for serving PHP and MySQL. We are using CloudFlare, which are saying that they are able to mitigate (D)DoS at some level, now the attacker knows our real IP address, so CloudFlare isn't helping a bit. I've done some searching on the net and found out about enabling SYN cookies, to defend against it. I've checked my settings and it seems it was enabled all along. I've also read about that Varnish is able to defend against SYN flooding and Slowloris attacks, now I'm pretty interested in using that. The thing is that CloudFlare is already caching a lot from us, and I don't wish to spend too much resources on Varnish. Is it possible and smart to set up Varnish only for the better handling of requests? Are there perhaps better ways which I've missed? Thanks in advance, Martin

  Read the article

• Windows 2008 server smart card security module problem

  - by chris13work

  Hi, I've got a smart card reader and a server application using it as a security module. If I run it under DOS prompt, everything is fine. The server is running and clients can connect to it. I tried to install the server as window service and start it. The server starts but always gives back authentication error because it cannot call the smart card to do encryption. Then I tried to start it with task scheduler and set the trigger factor as "on startup". The server starts also but still cannot access the smart card reader. Then I tried remote desktop to the machine and run the server application under DOS prompt. Same error is returned. The situation is that the smart card reader only works under active console desktop environment. In the server application, WINSCARD API is used to access the smart card reader. Any suggestion so that we can access the smart card reader in running services? OS: Windows Server 2008 Smart Card Driver: Windows USB smart card Reader Smart Card API: WINSCARD

  Read the article

• Windows 2008 server smart card security module problem

  - by chris13work

  Hi, I've got a smart card reader and a server application using it as a security module. If I run it under DOS prompt, everything is fine. The server is running and clients can connect to it. I tried to install the server as window service and start it. The server starts but always gives back authentication error because it cannot call the smart card to do encryption. Then I tried to start it with task scheduler and set the trigger factor as "on startup". The server starts also but still cannot access the smart card reader. Then I tried remote desktop to the machine and run the server application under DOS prompt. Same error is returned. The situation is that the smart card reader only works under active console desktop environment. In the server application, WINSCARD API is used to access the smart card reader. Any suggestion so that we can access the smart card reader in running services? OS: Windows Server 2008 Smart Card Driver: Windows USB smart card Reader Smart Card API: WINSCARD

  Read the article

• Kindly guide me to buy a new laptop [on hold]

  - by Its me 007

  I am from India. I want to buy a new laptop. Shortlisted few but confused between which processor,Chip set and Graphics will be the best suited for my requirements. NOTE: NOT ABLE TO POST THE LINKS YOU WILL HAVE TO COPY PASTE IT. SORRY. 1) HP Pavilion 15-N004TX - 4th Gen CI5 - 4200U/4GB RAM/500 GB HDD/ 1GB Radeon Graphic - Rs 39990 www.homeshop18.com/hp-pavilion-15-n004tx-laptop-4th-gen-intel-core-i5-4200u-4gb-500gb-15-6-linux-silver-black/computers-tablets/laptops/product:30989197/cid:16317/ 2) Lenovo Essential G510 (59-398452) - 4th Gen Ci5 4200M/ 4GB/ 500 GB/Win8/2GB Graph ATI Sunpro 8570 - Rs 44969 www.flipkart.com/lenovo-essential-g510-59-398452-laptop-4th-gen-ci5-4gb-500gb-win8-2gb-graph/p/itmdp26eprwf5k5v?gclid=CMnh99GA2LoCFaRU4godNiUAGQ&semcmpid=sem_7847244212_laptopsnew_goog&tgi=sem%2C1%2CG%2C7847244212%2Cg%2Csearch%2C%2C24387103114%2C1t1%2Cb%2C%2Blenovo+%2Bg510%2F59+%2B398452%2Cc%2C%2C%2C%2C%2C%2C%2C2 3) HP Pavilion G6-2303TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 500GB/ DOS/ 1GB Graph) - Rs 40500 www.flipkart.com/hp-pavilion-g6-2303tx-laptop-3rd-gen-ci5-4gb-500gb-dos-1gb-graph/p/itmdm6yzh4gr4cxd?pid=COMDM6YHWMGDRDEZ&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 4) HP Pavilion 15-E039TX Laptop (3rd Gen Ci5 3230M/ 4GB/ 1TB/ Win8/ 2GB Graph) - Rs 46690 www.flipkart.com/hp-pavilion-15-e039tx-laptop-3rd-gen-ci5-4gb-1tb-win8-2gb-graph/p/itmdn4d9wykhdcpz?pid=COMDN4CZGFMGJNTN&ref=1d2b85fc-a03d-4c7d-844b-ec9e8dc95a81 Now I am confused between: Which Processor and chipset is best? How much graphic card is enough? (Not a gamer) Is any of this laptop future proof i.e. it should at least support upcoming latest programming softwares which eats more processor and memory. Laptop will be mainly used for multiprocessing.It should be at least capable for following: Visual Studio 2012 and the upcoming versions for at least 4 years SQL server 2008 R2 and above Sharepoint Blend Photoshop Kindly suggest. If anyone know any good laptop with good configuration in the 50k budget kindly suggest. Thanks in advance.

  Read the article

• Windows Network File Transfer to Samba server: “Are you sure you want to copy this file without its properties?”

  - by jimp

  I am transferring a lot of files to a new NAS based on OpenMediaVault, with the Samba 3.5.6 service running. I am transferring from Windows 7 64-bit to the NAS, and on some media files Windows is prompting about losing some property data across the transfer. I have never seen this before when transferring to Samba boxes I have built myself (vs this turnkey solution), so I'm guessing there must be a Samba setting I can change to preserve the file properties in question instead of permanently losing whatever they contain (Date Taken? Exposure? Flash Fired? etc). Or maybe I've just never encountered this before; I'm really not sure. I tried adding ea support = yes and store dos attributes = yes to the [global] section, but the problem remains. The Linux file system is ext4 mounted with user_xattr (full options: defaults,acl,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0) as Samba requires. Any ideas would be greatly appreciated. Thank you! Samba config: [global] workgroup = WORKGROUP server string = %h server include = /etc/samba/dhcp.conf dns proxy = no log level = 2 syslog = 2 log file = /var/log/samba/log.%m max log size = 1000 syslog only = yes panic action = /usr/share/samba/panic-action %d encrypt passwords = true passdb backend = tdbsam obey pam restrictions = yes unix password sync = no passwd program = /usr/bin/passwd %u passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . pam password change = yes socket options = TCP_NODELAY IPTOS_LOWDELAY guest account = nobody load printers = no disable spoolss = yes printing = bsd printcap name = /dev/null unix extensions = yes wide links = no create mask = 0777 directory mask = 0777 use sendfile = no null passwords = no local master = yes time server = yes wins support = yes ea support = yes store dos attributes = yes Note: I found this related question, but it explains the loss due to the user trying to transfer from NTFS to FAT32.

  Read the article

• Can't Install Win2k8 On KVM - Classic 0x80070013 error

  - by javano

  I am trying to install Win2k8 Std as a KVM guest on Debian Squeeze. As you can see from these screen shots; No drives are detected (I have blanked out a 20GB image for testing) - screenshot1 I am using this driver CD: - screenshot2 I have signed the Win7 driver (I assume this was the most appropriate one?) - screenshot3 I can now see an unpartitioned drive - screenshot4 But I can't create a new partition on here, getting the error code 0x80070013 - screenshot5 I have had this error code before but only on a physical server. If I remember correctly it was complaining because the disks were partitioned as GPT (because it was a server that was being re-purposed) so repartitioning with an MS-DOS table fixed that. This is a blank disk image though. What is wrong here, and how can I correct this? Thank you. UPDATE I have booted the VM with a Gparted-Live disk and formatted this volume with an MS-DOS partitioning scheme, and a single 20GB NTFS file system. Now when I boot the Win2k8 CD, load my drivers, I get a different error. As you can see at the bottom of screenshot6 "Windows cannot be installed on this hard drive space. Windows must be installed to a partition formatted as NTFS". Clicking format produces the error (0x80004005) on the screen, so I think this is still a driver issue because Windows can see the drive but not interact with it properly. Is that insane thinking?

  Read the article

• "Access is Denied" when executing application from Command Prompt

  - by xpda

  Today when I tried to run an old DOS utility from the XP Command prompt, I got the message "Access is Denied." Then I found that most of the DOS utilities would not run, even though I have "full control" over them. They worked just fine a few weeks ago, and I have not made any OS changes other than Windows Upgrades. Then I tried running edlin.exe and edit.com from the Windows\system32 folder. Same result - "Access is Denied." I tried running these applications from Windows Explorer and got the message "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I am logged in as a member of Administrators and have full control over these files. I tried logging in as THE Administrator, with no change. I checked the security settings on the files, and have full control over all of them. I have tried copying the files to different drives, booting in safe mode, and running without antivirus and firewall, all with no change. Does anybody know what could cause this?

  Read the article

• Updating ASUS BIOS on Windows 7 64bit

  - by joesavage

  I've recently decided that I want to try and utilize my two graphics cards so that I can have a dual monitor setup. Unfortunately Windows only seems to notice my most recent graphics card installation - and so I've been told that I should look into my BIOS and try to enable two graphics cards. I could not find this setting anywhere in my M2N68-AM Plus v0210 BIOS. After some further research I figured that I should perhaps upgrade my BIOS, so I searched and managed to download the latest version (v1804) as a ROM file. However I am having difficulty figuring out how to install it. I've tried using the Asus EZFlash feature built into my BIOS, but when trying to load up a variety of different ROMs that are for my motherboard/BIOS I get the error: Boot block in file is not valid! I'm not totally sure what I should do to fix this, so I'm looking into other methods of upgrading my BIOS - however I can't really find any solutions that seem to work. Asus Update is for 32-bit only, AFUDOS doesn't appear to work on my Windows 7 64-bit system (I think it's supposed to run in DOS or something - but that just sounds confusing since I know nothing about DOS). Could anybody help me with this?

  Read the article

• Mount VHD In Ubuntu

  - by stalkerh

  How would one go about mount a VHD created a something like Disc2VHD in ubuntu , try the usual mount commands but cant seem to get it going

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >