Search Results

Search found 2230 results on 90 pages for 'gateway'.

Page 58/90 | < Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >

• Reasonably Secure Alternative to Poptop PPTP Server for Ubuntu server and Windows clients?

  - by wag2639

  I have a poptp server running on a old Fedora server but I'm upgrading to an Ubuntu 10.04 server. I was wondering if there are any good, reasonable secure alternatives to poptop that in can install on our new Ubuntu server as a way to get VPN access from Windows clients (XP and 7) to get remote access into our Intranet. We only use the VPN to access files located inside the network; we do not need to use it as a proxy/gateway. I've looked into openVPN but it seemed way too complicated and I would prefer something built into Windows. A Windows 7 only solution is OK.

  Read the article

• Windows Server 2003 Router, Good approach [closed]

  - by jM2.me

  Possible Duplicate: Windows Server 2003 Router with PortForwarding Situation We have Verizon Fios 25/25 Internet Connection, Server acting as a router, and around 12 office computers. Task Portforward port 29000 from office computer. Problem Once I connected wan and lan cables I just had to set static lan ip (on server) and plug in switch with office computers into second nic. Then just right click on wan nic and select share internet connection. All office computers were assigned with an IP address 192.168.0.XXX and Gateway 192.168.0.1 (server). Now I have to open port and portfoward it from computer 192.168.0.190 (static ip, manual). Using this guide http://www.rosscode.com/blog/index.php?title=port_forwarding_in_windows_2003&more=1&c=1&tb=1&pb=1 I faced a problem. Before enabling "RRA" I had to unshare internet connection (wan interface) and was able to setup network. Now how do I setup a network within "RRA" and share internet with private network? Thank you much

  Read the article

• Windows 2008 R2 Not resolving IP's or domains

  - by InsaneAR

  I have two servers with Microsoft Windows Server 2008 R2 x64, and today I realized that one of them don't resolve IP's or domain names. If I ping the same machine IP, it respond, but if I ping an external IP (like 8.8.8.8 or any other) it does not work. The same with domain names. At Windows Event Viewer I'm having Warning 1014: Name resolution for the name timed out after none of the configured DNS servers responded THE SERVER HAS CONNECTIVITY, I'm connected remotely and the services and incoming traffic (like FTP, etc) are working OK. Things I've done & tested: Run Kaspersky Virus Removal 10 Restart/Turn off the DNS Client service Clean the hosts file Reboot the server Turn off the Windows Firewall (there's not another firewall) Quit or replace the current DNS servers I just can ping the same machine IP or the gateway! Can anybody help me?

  Read the article

• Wireless Disconnects Randomly, then won't reconnect

  - by Nironan12

  Okay, so I have a Gateway laptop, with Windows Vista SP2, and a Linksys-Cisco WRT54GL Wireless-G Broadband Router. When I boot up my laptop, it automatically connects itself to my home network. Then at random times, it disconnects itself from said network. I go to reconnect it, but I get an unknown error and none of Vista's suggestions are working. Sometimes, after 5-10 minutes, it will reconnect itself. I've already tried updating the firmware. I can't install any other firmware, or make a factory reset. My dad owns the router and buys the internet and he won't let me TOUCH it. I can't do ANYTHING to it.

  Read the article

• In VirtualBox, how can I access host localhost from guest (Visual Studio Dev Server from IE7 testing VM)?

  - by Seth

  Host OS is Win7 running MyApp in the Visual Studio Development Server, bound to localhost:51227, VM is VirtualBox configured with NAT. Guest OS is Win XP with IE7 installed. My goal is to debug MyApp (running on host) from within IE7 (running on guest). Visual Studio Development server only binds to the loopback network device (i.e. localhost). It does not bind to the external IP address of my host. I've tried access 10.0.2.2:51227 from IE7 on the guest (and confirmed that 10.0.2.2 is the gateway address using ipconfig), but it appears that 10.0.2.2 binds to the external IP of the Host, NOT the loopback IP (localhost), so this does not work. Any suggestions?

  Read the article

• howt setup remote access into computer behind 2 routers?

  - by Steve Wasiura

  I can setup remote access to a pc behind a single router/firewall by using NAT and Port Forwarding, simples! But there is a customer that shares an internet connection with another office, and they are behind a second router firewall. I drawed a picture with my crayons but I can't attach it because I'm a new account on SF. see it here: http://i.imgur.com/b3FDx.png So how would I setup remote access to the pc that is beind the second firewall? It must be something about static routes, i.e. if I hit the wan ip on port 4905 I want it to forward it to 10.0.0.30 by going through 192.168.1.10 so a route statement like for all requests to 10.0.0.30, use 192.168.1.10 ? and ass u me router 2 has a static gateway ip of 192.168.1.10 and need a standard NAT on router 2 to point port 4905 to 10.0.0.30 is this the right way, any tips? both routers are netgear consumer equipment. thanks

  Read the article

• Installing a personal security certificate for Windows Server 2008 Terminal Services user

  - by Rick

  We use StoneEdge Order Manager, which runs under Microsoft Access, on several Windows computers as well as through Terminal Services on Windows Server 2008. Terminal Services users are unable to process credit cards using the First Data Global Gateway on the server. We have followed the necessary setup instructions provided under the user account, which involves adding a certificate in the Internet Options control panel. The Windows XP desktops require this to be done, or a generic 'unable to connect' message is shown when attempting to charge a card. On the server, this message is shown regardless of whether the certificate has been installed. Is there anything else that needs to be done that is specific to Windows Server that is not mentioned in the workstation instructions? Setup Instructions

  Read the article

• How can I connect a wired PC to the internet through my Macs wifi connection?

  - by David Weitz

  So I'll probably be buying a USB wifi adapater if I can't get this to work, but I'm trying. I have a wireless router at home and my Macbook Pro is connected to said wifi. My desktop doesn't have a wifi connection, but I've connected my macbook with my desktop via crossover cable. I enabled internet sharing on my macbook, but my Windows 7 desktop can't get a connection. I tried just regular file sharing and that works fine, but the internet sharing doesn't. I assume the goal is to get my PC to see my mac as the default gateway, but I've had no luck manually setting it. Here's the ifconfig output on my mac and my attempt at settings on windows: http://i.imgur.com/uJfUz.png

  Read the article

• Encrypting absolutely everything, even within the LAN

  - by chris_l

  Has anybody tried that approach already? I'm really considering it: Instead of relying on network based IDS etc., every packet must use encryption which was initiated by a certificate issued by my own CA. Every client gets a unique client certificate Every server gets a unique server certificate Every service additionally requires to login. Both SSL and SSH would be ok. Access to the internet would be done via an SSL tunnel to the gateway. Is it feasible? Does it create practical problems? How could it be done and enforced? What do you think?

  Read the article

• Unable chage IP address for eth0 without restart in Ubunto

  - by Rodnower

  I have Ubuntu 12.04.1 installed. I try to change IP address of the interface eth0 in /etc/network/interfaces from 192.168.1.3 to 192.168.1.4: auto lo iface lo inet loopback pre-up iptables-restore < /etc/iptables.up.rules auto eth0 iface eth0 inet static address 192.168.1.4 gateway 192.168.1.1 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 sudo service networking status Now I issue: sudo service networking restart I have response: stop: Unknown instance: networking stop/waiting And IP remains 192.168.1.3: eth0 Link encap:Ethernet HWaddr 00:1e:33:71:cd:a4 inet addr:192.168.1.3 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21e:33ff:fe71:cda4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3861 errors:0 dropped:0 overruns:0 frame:0 TX packets:3291 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3423285 (3.4 MB) TX bytes:521854 (521.8 KB) Interrupt:45 Base address:0x4000 Only after restart IP changing... Any ideas?

  Read the article

• Ubuntu 11.04 Static IP doesn't take

  - by mrduclaw

  I'm trying to set a static IP address in Ubuntu 11.04. I did a server install. I edited my /etc/network/interfaces file to include: auto eth0 iface eth0 inet static address 10.0.0.100 netmask 255.255.255.0 gateway 10.0.0.1 When I do a /etc/init.d/networking restart this appears to take. After awhile though, that 10.0.0.100 will turn into something dished out by the DHCP server. My problem appears to be similar to this: Ubuntu intrepid - static IP networking keeps restarting with DHCP But I don't have Gnome installed. Is there anything else that's running in the background that could be doing this? And if so, how do I disable it?

  Read the article

• Setting up VMWare ESXi 5 with a single physical NIC

  - by deed02392

  I have a cheap but powerful dedicated server I am leasing with OVH, because they were recently having a promotion. I would like to try and manage all this power by playing with VMs using ESXi. However I am only provided with a single NIC. I had thought this would be easy to get around since, at home I have a single NIC which is my broadband modem, and yet a simple NAT gateway device happily provides internet access to all my devices. I am struggling to implement this on ESXi, though. Can anyone advise on how I could go about having ESXi and multiple VMs working with just one NIC? Here's my current setup: I believe all I need is to be able to configure NAT from the NIC to all the VMs etc.. How would I set up and administer this kind of infrastructure?

  Read the article

• Bringing the xenbr0 interface up on XEN under Ubuntu 8.04

  - by iyl

  I installed XEN on Ubuntu 8.04 using this tutorial: http://www.howtoforge.com/ubuntu-8.04-server-install-xen-from-ubuntu-repositories but after I reboot with the XEN kernel, I don't have xenbr0 device. I see that network-bridge script runs and it creates peth0 device, but not xenbr0. I have a very basic IP setup, with a single static IP defined in /etc/network/interfaces. The only unusual thing is that my hosting (1&1) gave me a netmask 255.255.255.255, so I had to add the default gateway with this script: /sbin/route add -host 10.255.255.1 dev eth0 /sbin/route add default gw 10.255.255.1 Everything else is plain vanilla Ubuntu 8.04.

  Read the article

• Linux QoS (Skype / BitTorent / SIP / HTTP priority)

  - by Andre

  We are configuring a linux box that will act as internet gateway for an office of 30-50 computers. We are using iptables/HTB for traffic shaping. Is there a way to match traffic on L7 level? It's easy to identify traffic by TCP/UDP ports (like SIP and HTTP). But what if we are dealing with Skype & BitTorent? It was surprise for me that there is no powerful and matured sulution for tasks like this. I found only l7-filter (http://l7-filter.clearfoundation.com/) patch for the Linux kernel, but it's no longer supported (it seems to). Moreover it couldn't be compiled with modern Linux kernels. The only option I found was to use a Cisco router. Are there other ways to identify and shape Skype and Bittorent traffic?

  Read the article

• Combine VPN bandwith over two or more WAN connections? Load balancing?

  - by mistrfu

  Imagine you only have DSL with 5mbps Down and 2mbps Up. Is it possible to have 10 of these for example and combine them in a way that would increase the upstrean bandwidth to one server? In my head it works like this: intranet with one gateway/router router connected to multi wan load ballancer on each ballancer wan port router with vpn clinet set up, tunneling to a server ?some? software on the server in cloud joining all these connection into one interface again I would need this mostly for big uploads to a server, downlink to the office is not that important at all. Does it even make sense? I drew an image to clarify.

  Read the article

• ssh can't connect after server ip changed

  - by Kery

  I have a server with ubuntu installed. After I change the network configuration and restart server, ssh client can't connect server any more. But in the server I can use ssh client to connect itself and the netstat command shows that sshd is listening port 22. And in my computer (win7) ping command is OK to server's new IP. The configuration in /etc/network/interfaces is: auto eth0 iface eth0 inet static address 10.80.x.x netmask 255.255.255.0 gateway 10.80.x.1 I'm very confused about this. Hope somebody can give me some idea. Thank you in advance!!!

  Read the article

• How to setup a daily report of the top e-mail senders in Exchange 2010

  - by Belmin

  We have had issues with compromised Exchange accounts sending a large amount of unsolicited e-mails out. We have mitigated this by using a cloud e-mail gateway that does a better job in detecting these outgoing messages as to not hurt our e-mail reputation. However, we would still like to detect any abnormal e-mail activities. One idea is a report of the Exchange accounts with the most outgoing message. Any idea on how to do this? Or a similar stat that may be indicative of an account being compromised?

  Read the article

• how to communicate in typical router switch router scenario?

  - by Kossel

  I'm learning routing using packet tracer simulation and I think this is a very commun scenario: let's say pc4 is the server... why I can't ping from PC1 to 192.168.2.253 (router1) but I can ping 192.168.2.2 (pc0) aren't they the same subnet? what am I missing or have to do in order to reach pc4? (192.168.100.254) from pc 1 (192.168.1.1) is there something like "default gateway" for router? thanks for advice PS: during the simulation it shows error "The routing table does not have a route to the destination IP address. The router drops the packe (from 192.168.2.253 to 192.168.1.1)"

  Read the article

• How to make all of my IPs works in HyperVM XEN?

  - by user758667

  I've installed HyperVM on CentOS 5.8 final to make XEN VPS. I have 5 IPs, and added them to an IPPool. They are from *.123 to *.126. But when I add Virtual machines, just the first one (which indicate to *.123 ip) works well. I mean I can ssh to it by "works well" and when I want ssh to the other ones ( *.124 *.125 ...) it says : ssh: connect to host *.124 port 22: Connection timed out after a while. I alos set gateway and netmask as it shows in my server IPAdresses for device eth0 (it doesn't make any difference if I set these or not, I get same error). What should I do now? Thanks.

  Read the article

• Selectively routing traffic via ethernet or wifi, with proper DNS (Mac OS X 10.6)

  - by Dan

  When I'm at work, I access various intranet pages as well as the wider Internet through ethernet. However, the company LAN blocks some ports (e.g. Google Calendar). I can get to those through WiFi. So, I gave the Airport priority, and then using route add, I set up selective routing: all intranet traffic goes through the ethernet and everything else via WiFi: sudo route add 10.0.0.0/8 <intranet gateway>. However, there are a number of intranet sites that have their own DNS; i.e., hr.company.com only resolves on the intranet. The only way that I can get the DNS to work properly is to add the internal DNS server to the Airport DNS listing, however I fear that when I go elsewhere and forget, this will break things. What's the right way to get the DNS to resolve using this setup?

  Read the article

• Change ip route metric

  - by notphunny

  I'm constantly switching between eth0 and wlan0 interface on my archlinux because I often change OpenWrt fw images on my second router (which isn't connected anywhere). So I have problem with my routes when I'm connected to my wlan and want to connect with Ethernet to my router. Both routers are on 192.168.1.1/24 and after connecting to my Ethernet profile eth0 route becomes default one (which is ok for the time), because of smaller metric I guess. So I'm interested, how can I change routes metric so my applications can be connected to the internet (through out wlan)? Maybe there is solution not to use Default Gateway on Ethernet profile, however I still want to know how to change metric. Or default route if there are more then one.

  Read the article

• IPSec VPN IP addresses

  - by Randomblue

  I have an IPSec VPN on my Windows 7 machine (all using the native Windows 7 gateway). The host I am connecting to has different ISAKMP "Phase 1" and "Phase 2" IP addresses. As I understand, the Phase 1 address is that of the IPsec endpoint, to which I can connect just fine. The Phase 2 address is found in their "crypto map", and the addresses need to match. At the moment, both my Phase 1 and Phase 2 addresses are configured the same. On my side, I get the error "Error 791: The L2TP connection attempt failed because security policy for the connection was not found" How can I configure the Phase 2 IP address for my Windows 7 IPSec VPN to be different to the IPSec endpoint address?

  Read the article

• cannot using internet in VMWare

  - by user66247

  I am using VMware Workstation version 7 on Ubuntu 10.10. I installed Windows XP service pack 3 for guest os. Within VMWare, I am using bridge connection that I assigned static IP address to be able to ping host IP address but I cannot ping default router gateway. I also tried to command "/etc/init.d/vmware start" on terminal. All tasks are able to start successfully except "VM communication interface socket family" I am not sure that how to setup network for my VMWare by using wireless. Thanks in advance.

  Read the article

• Unable to open websites that use HTTPS on linux

  - by negai

  I have the following network configuration: My PC 192.168.1.20/24 uses 192.168.1.1/24 as a gateway. Dlink-2760U router with Local address 192.168.1.1/24 has a VPN connection open with the provider using PPTP. Whenever I'm trying to open some web-sites that has some authorization (e.g. gmail.com, coursera.org), I'm getting a request timeout. This problem is observed mostly on linux (Ubuntu 12.04 and Debian 6.0), while most of such websites work correctly on windows XP. Could you please help me diagnose the problem? Could it be related to NAT + HTTPS? Thanks

  Read the article

• Hosting company that does Linux VPS and MS SQL

  - by danielmcq

  I'm looking for hosted solutions but there are so many companies that finding the right one using a Google search is a bit overwhelming. Ideally I would like a hosting company which has following options: -Linux VPSs - Individual VPSs should be fairly cheap since I plan on putting one or two services per VPS i.e web server on one (httpd and ColdFusion), an SVN server on another, etc. -Managed MS SQL databases - My company already has data in MS SQL databases and a lot of ColdFusion code written that has MS SQL specific commands in it. -Individually purchased dedicated IP addresses -Preferably located in the North America region My plan would be to setup one Linux VPS as a gateway/firewall/VPN server and have all of my traffic routed through so that my other servers would not use of bandwidth by talking to each other. The trick is also finding a company that does Linux VPS AND MS SQL databases. Does anybody know of any hosting companies offer what I'm looking for? Let me know if I need to add more details.

  Read the article

< Previous Page | 54 55 56 57 58 59 60 61 62 63 64 65  | Next Page >