Search Results

Search found 33443 results on 1338 pages for 'reply list'.

Page 581/1338 | < Previous Page | 577 578 579 580 581 582 583 584 585 586 587 588  | Next Page >

• Ubuntu 12.04 LXC nat prerouting not working

  - by petermolnar

  I have a running Debian Wheezy setup I copied exactly to an Ubuntu 12.04 ( elementary OS, used as desktop as well ) While the Debian setup runs flawlessly, the Ubuntu version dies on the prerouting to containers ( or so it seems ) In short: lxc works containers work and run connecting to container from host OK ( including mixed ports & services ) connecting to outside world from container is fine What does not work is connecting from another box to the host on a port that should be NATed to a container. The setups: /etc/rc.local CMD_BRCTL=/sbin/brctl CMD_IFCONFIG=/sbin/ifconfig CMD_IPTABLES=/sbin/iptables CMD_ROUTE=/sbin/route NETWORK_BRIDGE_DEVICE_NAT=lxc-bridge HOST_NETDEVICE=eth0 PRIVATE_GW_NAT=192.168.42.1 PRIVATE_NETMASK=255.255.255.0 PUBLIC_IP=192.168.13.100 ${CMD_BRCTL} addbr ${NETWORK_BRIDGE_DEVICE_NAT} ${CMD_BRCTL} setfd ${NETWORK_BRIDGE_DEVICE_NAT} 0 ${CMD_IFCONFIG} ${NETWORK_BRIDGE_DEVICE_NAT} ${PRIVATE_GW_NAT} netmask ${PRIVATE_NETMASK} promisc up Therefore lxc network is 192.168.42.0/24 and the host eth0 ip is 192.168.13.100; setup via network manager as static address. iptables: *mangle :PREROUTING ACCEPT [0:0] :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] COMMIT *filter :FORWARD ACCEPT [0:0] :INPUT DROP [0:0] :OUTPUT ACCEPT [0:0] # Accept traffic from internal interfaces -A INPUT -i lo -j ACCEPT # accept traffic from lxc network -A INPUT -d 192.168.42.1 -s 192.168.42.0/24 -j ACCEPT # Accept internal traffic Make sure NEW incoming tcp connections are SYN # packets; otherwise we need to drop them: -A INPUT -p tcp ! --syn -m state --state NEW -j DROP # Packets with incoming fragments drop them. This attack result into Linux server panic such data loss. -A INPUT -f -j DROP # Incoming malformed XMAS packets drop them: -A INPUT -p tcp --tcp-flags ALL ALL -j DROP # Incoming malformed NULL packets: -A INPUT -p tcp --tcp-flags ALL NONE -j DROP # Accept traffic with the ACK flag set -A INPUT -p tcp -m tcp --tcp-flags ACK ACK -j ACCEPT # Allow incoming data that is part of a connection we established -A INPUT -m state --state ESTABLISHED -j ACCEPT # Allow data that is related to existing connections -A INPUT -m state --state RELATED -j ACCEPT # Accept responses to DNS queries -A INPUT -p udp -m udp --dport 1024:65535 --sport 53 -j ACCEPT # Accept responses to our pings -A INPUT -p icmp -m icmp --icmp-type echo-reply -j ACCEPT # Accept notifications of unreachable hosts -A INPUT -p icmp -m icmp --icmp-type destination-unreachable -j ACCEPT # Accept notifications to reduce sending speed -A INPUT -p icmp -m icmp --icmp-type source-quench -j ACCEPT # Accept notifications of lost packets -A INPUT -p icmp -m icmp --icmp-type time-exceeded -j ACCEPT # Accept notifications of protocol problems -A INPUT -p icmp -m icmp --icmp-type parameter-problem -j ACCEPT # Respond to pings, but limit -A INPUT -m icmp -p icmp --icmp-type echo-request -m state --state NEW -m limit --limit 6/s -j ACCEPT # Allow connections to SSH server -A INPUT -p tcp -m tcp --dport 22 -m state --state NEW -m limit --limit 12/s -j ACCEPT COMMIT *nat :OUTPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 2221 -m state --state NEW -m limit --limit 12/s -j DNAT --to-destination 192.168.42.11:22 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 80 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:80 -A PREROUTING -d 192.168.13.100 -p tcp -m tcp --dport 443 -m state --state NEW -m limit --limit 512/s -j DNAT --to-destination 192.168.42.11:443 -A POSTROUTING -d 192.168.42.0/24 -o eth0 -j SNAT --to-source 192.168.13.100 -A POSTROUTING -o eth0 -j MASQUERADE COMMIT sysctl: net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.all.mc_forwarding = 0 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.default.mc_forwarding = 0 net.ipv4.ip_forward = 1 I've set up full iptables log on the container; none of the packets addressed to 192.168.13.100, port 80 is reaching the container. I've even tried different kernels ( server kernel, raring lts kernel, etc ), modprobe everything iptables & nat related, nothing. Any ideas?

  Read the article

• Color Picking Troubles - LWJGL/OpenGL

  - by Tom Johnson

  I'm attempting to check which object the user is hovering over. While everything seems to be just how I'd think it should be, I'm not able to get the correct color due to the second time I draw (without picking colors). Here is my rendering code: public void render() { glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); camera.applyTranslations(); scene.pick(); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glLoadIdentity(); camera.applyTranslations(); scene.render(); } And here is what gets called on each block/tile on "scene.pick()": public void pick() { glColor3ub((byte) pickingColor.x, (byte) pickingColor.y, (byte) pickingColor.z); draw(); glReadBuffer(GL_FRONT); ByteBuffer buffer = BufferUtils.createByteBuffer(4); glReadPixels(Mouse.getX(), Mouse.getY(), 1, 1, GL_RGBA, GL_UNSIGNED_BYTE, buffer); int r = buffer.get(0) & 0xFF; int g = buffer.get(1) & 0xFF; int b = buffer.get(2) & 0xFF; if(r == pickingColor.x && g == pickingColor.y && b == pickingColor.z) { hovered = true; } else { hovered = false; } } I believe the problem is that in the method of each tile/block called by scene.pick(), it is reading the color from the regular drawing state, after that method is called somehow. I believe this because when I remove the "glReadBuffer(GL_FRONT)" line from the pick method, it seems to almost fix it, but then it will also select blocks behind the one you are hovering as it is not only looking at the front. If you have any ideas of what to do, please be sure to reply!/ EDIT: Adding scene.render(), tile.render(), and tile.draw() scene.render: public void render() { for(int x = 0; x < tiles.length; x++) { for(int z = 0; z < tiles.length; z++) { tiles[x][z].render(); } } } tile.render: public void render() { glColor3f(color.x, color.y, color.z); draw(); if(hovered) { glColor3f(1, 1, 1); glPolygonMode(GL_FRONT_AND_BACK, GL_LINE); draw(); glPolygonMode(GL_FRONT_AND_BACK, GL_FILL); } } tile.draw: public void draw() { float x = position.x, y = position.y, z = position.z; //Top glBegin(GL_QUADS); glVertex3f(x, y + size, z); glVertex3f(x + size, y + size, z); glVertex3f(x + size, y + size, z + size); glVertex3f(x, y + size, z + size); glEnd(); //Left glBegin(GL_QUADS); glVertex3f(x, y, z); glVertex3f(x + size, y, z); glVertex3f(x + size, y + size, z); glVertex3f(x, y + size, z); glEnd(); //Right glBegin(GL_QUADS); glVertex3f(x + size, y, z); glVertex3f(x + size, y + size, z); glVertex3f(x + size, y + size, z + size); glVertex3f(x + size, y, z + size); glEnd(); } (The game is like an isometric game. That's why I only draw 3 faces.)

  Read the article

• Notes - Part II - Play with JavaFX

  - by Silviu Turuga

  Open the project from last lesson Double click on NotesUI.fmxl, this will open the JavaFX Scene Builder On the left side you have a area called Hierarchy, from there press Del or Shift+Backspace on Mac to delete the Button and the Label. You'll receive a warning, that some components have been assigned an fx:id, click Delete as we don't need them anymore. Resize the AnchorPane to have enough room for our design, eg. 820x550px From the top left pick the Container called Accordion and drag over the AnchorPane design Chose then from Controls a List View and drag inside the Accordion. You'll notice that by default the Accordion has 2 TitledPane, and you can switch between them by clicking on their name. I'll let you the pleasure to do the rest in order to get the following result  Here is the list of objects used Save it and then return to NetBeans Run the application and it should be run without any issue. If you click on buttons they all are functional, but nothing happens as we didn't link them with any action. We'll see this in the next episode. Now, let's play a little bit with the application and try to resize it… Have you notice the behavior? If the form is too small, some objects aren't visible, if it is too large there is too much space . That's for sure something that your users won't like and you as a programmer have to care about this. From NetBeans double click NotesUI.fmxl so to return back to JavaFX Scene Builder Select the TextField from bottom left of Notes, the one where I put the text Category and then from the right part of JavaFX Scene Builder you'll notice a panel called Inspector. Chose Layout and then click on the dotted lines from left and bottom of the square, like you see in the below image This will make the textfield to have always the same distance from left and bottom no matter the size of the form. Save and run the application. Note that whenever the form is changing the Height, the Category TextField has the same distance from the bottom. Select Accordion and do the same steps but also check the top dotted line, because we want the Accordion to have the same height as the main form has. I'll let you the pleasure to do the same for the rest of components. It's very important to design an application that can be resize by user and in the same time, all the buttons are on place. Last step is to make sure our application is not getting smaller then a certain size, as this will hide parts of our layout. So select the AnchorPane and from Inspector go to Layout and note down the Width and Height. Go back to NetBeans and open the file Main.java and add the following code just after stage.setScene(scene); (around line 26) stage.setMinWidth(820); stage.setMinHeight(550); Use your own width and height. This will prevent user to reduce the width or height of your application to a value that will hide parts of your layout. So now you should have done most of the design part and next time we'll see how can we enter some data into our newly created application… Note: in case you miss something, here are the source files of the project till this point. 

  Read the article

• How to deal with overly aggressive "Link Take Down Demands"?

  - by Eoin

  I've been receiving a large number of emails recently requesting I clean from link spam from my forum. Initially the emails were very polite and professional, and I was happy to remove the links. Recently the email have gotten very abrasive, here is a particularly rude example: From: [email protected] To: [email protected] Hi, This is the second time we are reaching out to you regarding your link to our site hxxp://www.company-two.com from hxxp://www.my-forum.com/some-topic-id. We really do need to remove this link. We have to report to Google any link we were unable to remove, and I wouldn't want to have to include your site in the list. Could you please remove our link from this page and any other page on your site? Thank You, Name Changed Behind the superficial pleasantries I feel there is some very real maliciousness. Note the email address, DMCA Violations, I don't see how the DMCA is involved here, except as a word which tends to strike fear in many people. Also relating to the email address, it doesn't match the company being linked to at all. How am I to trust they are truely operating on behalf of company-two when they don't even use one of it's email addresses. My email is hidden by privacypost. While a service with legitimate uses, I feel it's highly unprofessional for communications between to companies. The claim "This is the second time..." Every email I've received has started like this, but a check of my spam filters has never revealed a 1st mail. Initially I gave them the benefit of the doubt, by now though it's clear this is a cheap ploy to start me off on the defensive. And finally worst of all- the threats of reporting me to Google if I don't do everything they ask. I sent a polite reply asking for more information. I have no idea if the email address was even valid but I never received any response. Much later I got this followup mail From: [email protected] To: [email protected] Hi, This is the final time we are reaching out to you regarding your link to our site hxxp://www.company-two.com from hxxp://www.my-forum.com/some-topic-id. We will soon be reporting to Google any link we were unable to remove, and currently your site will have to be on the list. Could you please remove our link from this page and any other page on your site? I appreciate your urgent attention to this matter. Thank You, Name Changed This time the from address was more personal, though still not obviously connected to the spammed company. Lets be honest, I don't for one second believe that the companies were the victim of a 3rd party spammer as they claim. The links in questions were generated well over a year ago, and I firmly believe the companies were directly responsible for the spam links in question, a type of spam that has plagued my forum. Now they have the audacity to demand I spend my time cleaning up their mess, using threats to ensure they get their way. Have recent changes in Googles algorithms meant all the cash they spent spamming the web has now turned into a liability? If so I can see why these companies are all of a sudden running scared. Frankly, cleaning up my forum is a good things, but the threats they are using sickens me. So my question here is specifically about the threats: Are they vaild, and would such reports to Google destroy my page rankings? Is there a way I can report this abusive behaviour to Google?

  Read the article

• Teminal hands on load, can't enter anything until CTRL+C

  - by Silver Light

  Hello! I have an issue with terminal in Ubuntu 10.04. When I launch it, it hangs, like this: I cannot do anything until I press CTRL+C: I cannot remember when this started. What can be wrong? Looks like teminal is loading or processing something each time it loads. How can I diagnose and solve this problem? EDIT: Here are the conents of ~/.bashrc: # ~/.bashrc: executed by bash(1) for non-login shells. # see /usr/share/doc/bash/examples/startup-files (in the package bash-doc) # for examples # If not running interactively, don't do anything [ -z "$PS1" ] && return # don't put duplicate lines in the history. See bash(1) for more options # ... or force ignoredups and ignorespace HISTCONTROL=ignoredups:ignorespace # append to the history file, don't overwrite it shopt -s histappend # for setting history length see HISTSIZE and HISTFILESIZE in bash(1) HISTSIZE=1000 HISTFILESIZE=2000 # check the window size after each command and, if necessary, # update the values of LINES and COLUMNS. shopt -s checkwinsize # make less more friendly for non-text input files, see lesspipe(1) [ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)" # set variable identifying the chroot you work in (used in the prompt below) if [ -z "$debian_chroot" ] && [ -r /etc/debian_chroot ]; then debian_chroot=$(cat /etc/debian_chroot) fi # set a fancy prompt (non-color, unless we know we "want" color) case "$TERM" in xterm-color) color_prompt=yes;; esac # uncomment for a colored prompt, if the terminal has the capability; turned # off by default to not distract the user: the focus in a terminal window # should be on the output of commands, not on the prompt #force_color_prompt=yes if [ -n "$force_color_prompt" ]; then if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then # We have color support; assume it's compliant with Ecma-48 # (ISO/IEC-6429). (Lack of such support is extremely rare, and such # a case would tend to support setf rather than setaf.) color_prompt=yes else color_prompt= fi fi if [ "$color_prompt" = yes ]; then PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ ' else PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ ' fi unset color_prompt force_color_prompt # If this is an xterm set the title to user@host:dir case "$TERM" in xterm*|rxvt*) PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1" ;; *) ;; esac # enable color support of ls and also add handy aliases if [ -x /usr/bin/dircolors ]; then test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)" alias ls='ls --color=auto' #alias dir='dir --color=auto' #alias vdir='vdir --color=auto' alias grep='grep --color=auto' alias fgrep='fgrep --color=auto' alias egrep='egrep --color=auto' fi # some more ls aliases alias ll='ls -alF' alias la='ls -A' alias l='ls -CF' # Add an "alert" alias for long running commands. Use like so: # sleep 10; alert alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo error)" "$(history|tail -n1|sed -e '\''s/^\s*[0-9]\+\s*//;s/[;&|]\s*alert$//'\'')"' # Alias definitions. # You may want to put all your additions into a separate file like # ~/.bash_aliases, instead of adding them here directly. # See /usr/share/doc/bash-doc/examples in the bash-doc package. if [ -f ~/.bash_aliases ]; then . ~/.bash_aliases fi # enable programmable completion features (you don't need to enable # this, if it's already enabled in /etc/bash.bashrc and /etc/profile # sources /etc/bash.bashrc). if [ -f /etc/bash_completion ] && ! shopt -oq posix; then . /etc/bash_completion fi # Source .profile if [ -f ~/.profile ]; then . ~/.profile fi Setting -x at the beginning showed me that it tries to repeat this without stopping: +++++++++++++++++++ '[' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' '!=' 'complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' ']' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line='complete -f -X '\''!*.@(pdf|PDF)'\'' acroread gpdf xpdf' +++++++++++++++++++ line=' acroread gpdf xpdf' +++++++++++++++++++ list=("${list[@]}" $line) +++++++++++++++++++ read line

  Read the article

• Consumer Oriented Search In Oracle Endeca Information Discovery - Part 2

  - by Bob Zurek

  As discussed in my last blog posting on this topic, Information Discovery, a core capability of the Oracle Endeca Information Discovery solution enables businesses to search, discover and navigate through a wide variety of big data including structured, unstructured and semi-structured data. With search as a core advanced capabilities of our product it is important to understand some of the key differences and capabilities in the underlying data store of Oracle Endeca Information Discovery and that is our Endeca Server. In the last post on this subject, we talked about Exploratory Search capabilities along with support for cascading relevance. Additional search capabilities in the Endeca Server, which differentiate from simple keyword based "search boxes" in other Information Discovery products also include: The Endeca Server Supports Set Search.  The Endeca Server is organized around set retrieval, which means that it looks at groups of results (all the documents that match a search), as well as the relationship of each individual result to the set. Other approaches only compute the relevance of a document by comparing the document to the search query – not by comparing the document to all the others. For example, a search for “U.S.” in another approach might match to the title of a document and get a high ranking. But what if it were a collection of government documents in which “U.S.” appeared in many titles, making that clue less meaningful? A set analysis would reveal this and be used to adjust relevance accordingly. The Endeca Server Supports Second-Order Relvance. Unlike simple search interfaces in traditional BI tools, which provide limited relevance ranking, such as a list of results based on key word matching, Endeca enables users to determine the most salient terms to divide up the result. Determining this second-order relevance is the key to providing effective guidance. Support for Queries and Filters. Search is the most common query type, but hardly complete, and users need to express a wide range of queries. Oracle Endeca Information Discovery also includes navigation, interactive visualizations, analytics, range filters, geospatial filters, and other query types that are more commonly associated with BI tools. Unlike other approaches, these queries operate across structured, semi-structured and unstructured content stored in the Endeca Server. Furthermore, this set is easily extensible because the core engine allows for pluggable features to be added. Like a search engine, queries are answered with a results list, ranked to put the most likely matches first. Unlike “black box” relevance solutions, which generalize one strategy for everyone, we believe that optimal relevance strategies vary across domains. Therefore, it provides line-of-business owners with a set of relevance modules that let them tune the best results based on their content. The Endeca Server query result sets are summarized, which gives users guidance on how to refine and explore further. Summaries include Guided Navigation® (a form of faceted search), maps, charts, graphs, tag clouds, concept clusters, and clarification dialogs. Users don’t explicitly ask for these summaries; Oracle Endeca Information Discovery analytic applications provide the right ones, based on configurable controls and rules. For example, the analytic application might guide a procurement agent filtering for in-stock parts by visualizing the results on a map and calculating their average fulfillment time. Furthermore, the user can interact with summaries and filters without resorting to writing complex SQL queries. The user can simply just click to add filters. Within Oracle Endeca Information Discovery, all parts of the summaries are clickable and searchable. We are living in a search driven society where business users really seem to enjoy entering information into a search box. We do this everyday as consumers and therefore, we have gotten used to looking for that box. However, the key to getting the right results is to guide that user in a way that provides additional Discovery, beyond what they may have anticipated. This is why these important and advanced features of search inside the Endeca Server have been so important. They have helped to guide our great customers to success. 

  Read the article

• Why Apple’s New SDK Limitation is So Offensive

  - by TStewartDev

  I am not an Apple fanboy, nor have I ever been. However, I have owned a Mac, an iPod, and an iPhone in my lifetime, and for more than a decade, I have defended Apple against the untruths that the haters so enjoy spewing. I encouraged my wife to buy a MacBook when she needed a new laptop two years ago, and I often recommend them to my friends and relatives. I have proudly and happily used my first generation iPhone for nearly three years. Now, for the first time in well over ten years, I find myself ready to swear off Apple and encourage everyone I know to do the same. I was disappointed when Apple wouldn't allow native apps, but I still bought the iPhone. I've stomached their ambiguous app approval process even though it's apparent that Steve may just reject your app because he doesn't like you or feels threatened by you (I'm still lamenting the rejection of the Google Voice app). But, as a developer, I can no longer tolerate Apple's terms and the kind of totalitarian control they indicate Apple wants. In case you are not already familiar, Apple has dictated in their OS 4.0 SDK license agreement (the now infamous Section 3.3.1) that all apps developed for the iPhone must be coded in C, C++, or Objective C, and moreover, that using any cross-compiling platforms is a violation of the agreement. For those of you who aren't developers, let me try to illustrate why this angers those of us who are. Imagine you're a professional writer. You've had articles published in some journals and magazines, and you've got a couple popular books out there, too. You've got an idea for a new book, and so you take it to your publisher. Your publisher agrees that it's a good idea. "But," says the publisher, "we want to hold our books to a tighter standard so that our readers get the experience we want them to have. Therefore, from now on, all our writers may only use words from this list of the 10,000 most common English words. Furthermore, if you cite any other works or quote anyone, they must comply with that same list, or you'll have to rewrite the entire work as well in case our readers want to look up your citation." What do you do? If your work is a children's book, this probably isn't a big deal to you. If it's an autobiography, textbook, or even a novel, though, you're going to have a lot of trouble describing your content with only common words. It's going to take you longer to complete your book, too, since you'll be looking up less common words frequently to see if you can use them. You could always go to another publisher, but this one has the best ability to distribute your book. The next largest distributor can only do a quarter as much. You could abandon the project altogether, but then everyone loses. Isn't this a silly scenario? Who would put such a limitation on writers? Yet this is very much what Apple is doing. They are using their dominant position in the market to coerce developers to write their apps exclusively for the iPhone OS by making it too expensive to write for multiple platforms. It is at least a threefold attack, striking at Adobe who is set to release a compiler that lets Flash source be compiled to iPhone binaries; striking at Google whose Android platform stands the best chance at the moment of providing serious competition to the iPhone; and reinforcing their own strong position by keeping popular apps exclusively to iPhone. And while developers are already very upset about this, the sad fact is that most of us will cave and give in to Apple because consumers don't know any better. They will continue to buy Apple's toy forcing developers to play Apple's maniacal game in order to make any money, at least until Steve Jobs decides he doesn't like them or he intends to release a competing application (bye-bye OpenFeint). Apple has been kept in check on the desktop front by a very dominant Microsoft, but I'm afraid that their success with iPods, iTunes, and iPhones has created a monster that we may have to bear until it is slain by an anti-trust suit or dies with the retirement of Steve Jobs.

  Read the article

• Framework for Everything - Where to begin? [Longer post]

  - by SquaredSoft

  Back story of this question, feel free to skip down for the specific question Hello, I've been very interested in the idea of abstract programming the last few years. I've made about 30 attempts at creating a piece of software that is capable of almost anything you throw at it. I've undertook some attempts at this that have taken upwards of a year, while getting close, never releasing it beyond my compiler. This has been something I've always tried wrapping my head around, and something is always missing. With the title, I'm sure you're assuming, "Yes of course you noob! You can't account for everything!" To which I have to reply, "Why not?" To give you some background into what I'm talking about, this all started with doing maybe a shade of gray hat SEO software. I found myself constantly having to create similar, but slightly different sets of code. I've gone through as many iterations of way to communicate on http as the universe has particles. "How many times am I going to have to write this multi-threaded class?" is something I found myself asking a lot. Sure, I could create a class library, and just work with that, but I always felt I could optimize what I had, which often was a large undertaking and typically involved frequent use of the CRTL+A keyboard shortcut, mixed with the delete button. It dawned on me that it was time to invest in a plugin system. This would allow me to simply add snippets of code. as time went on, and I could subversion stuff out, and distribute small chunks of code, rather than something that encompasses only a specific function or design. This comes with its own complexity, of course, and by the time I had finished the software scope for this addition, it hit me that I would want to add to everything in the software, not just a new http method, or automation code for a specific website. Great, we're getting more abstract. However, the software that I have in my mind comes down to a quite a few questions regarding its execution. I have to have some parameters to what I am going to do. After writing what the perfect software would do in my mind, I came up with this as a list of requirements: Should be able to use networking A "Macro" or "Expression system" which would allow people to do something like : =First(=ParseToList(=GetUrl("http://www.google.com?q=helloworld!"), Template.Google)) Multithreaded Able to add UI elements through some type of XML -- People can make their own addons etc. Can use third party API through the plugins, such as Microsoft CRM, Exchange, etc. This would allow the software to essentially be used for everything. Really, any task you wish to automate, in a simple way. Making the UI was as also extremely hard. How do you do all of this? Its very difficult. So my question: With so many attempts at this, I'm out of ideas how to successfully complete this. I have a very specific idea in my mind, but I keep failing to execute it. I'm a self taught programmer. I've been doing it for years, and work professionally in it, but I've never encountered something that would be as complex and in-depth as a system which essentially does everything. Where would you start? What are the best practices for design? How can I avoid constantly having to go back and optimize my software. What can I do to generalize this and draw everything out to completion. These are things I struggle with. P.s., I'm using c# as my main language. I feel like in this example, I might be hitting the outer limit of the language, although, I don't know if that is the case, or if I'm just a bad programmer. Thanks for your time.

  Read the article

• Dynamically load and call delegates based on source data

  - by makerofthings7

  Assume I have a stream of records that need to have some computation. Records will have a combination of these functions run Sum, Aggregate, Sum over the last 90 seconds, or ignore. A data record looks like this: Date;Data;ID Question Assuming that ID is an int of some kind, and that int corresponds to a matrix of some delegates to run, how should I use C# to dynamically build that launch map? I'm sure this idea exists... it is used in Windows Forms which has many delegates/events, most of which will never actually be invoked in a real application. The sample below includes a few delegates I want to run (sum, count, and print) but I don't know how to make the quantity of delegates fire based on the source data. (say print the evens, and sum the odds in this sample) using System; using System.Threading; using System.Collections.Generic; internal static class TestThreadpool { delegate int TestDelegate(int parameter); private static void Main() { try { // this approach works is void is returned. //ThreadPool.QueueUserWorkItem(new WaitCallback(PrintOut), "Hello"); int c = 0; int w = 0; ThreadPool.GetMaxThreads(out w, out c); bool rrr =ThreadPool.SetMinThreads(w, c); Console.WriteLine(rrr); // perhaps the above needs time to set up6 Thread.Sleep(1000); DateTime ttt = DateTime.UtcNow; TestDelegate d = new TestDelegate(PrintOut); List<IAsyncResult> arDict = new List<IAsyncResult>(); int count = 1000000; for (int i = 0; i < count; i++) { IAsyncResult ar = d.BeginInvoke(i, new AsyncCallback(Callback), d); arDict.Add(ar); } for (int i = 0; i < count; i++) { int result = d.EndInvoke(arDict[i]); } // Give the callback time to execute - otherwise the app // may terminate before it is called //Thread.Sleep(1000); var res = DateTime.UtcNow - ttt; Console.WriteLine("Main program done----- Total time --> " + res.TotalMilliseconds); } catch (Exception e) { Console.WriteLine(e); } Console.ReadKey(true); } static int PrintOut(int parameter) { // Console.WriteLine(Thread.CurrentThread.ManagedThreadId + " Delegate PRINTOUT waited and printed this:"+parameter); var tmp = parameter * parameter; return tmp; } static int Sum(int parameter) { Thread.Sleep(5000); // Pretend to do some math... maybe save a summary to disk on a separate thread return parameter; } static int Count(int parameter) { Thread.Sleep(5000); // Pretend to do some math... maybe save a summary to disk on a separate thread return parameter; } static void Callback(IAsyncResult ar) { TestDelegate d = (TestDelegate)ar.AsyncState; //Console.WriteLine("Callback is delayed and returned") ;//d.EndInvoke(ar)); } }

  Read the article

• Profiling Startup Of VS2012 &ndash; dotTrace Profiler

  - by Alois Kraus

  Jetbrains which is famous for the Resharper tool has also a profiler in its portfolio. I downloaded dotTrace 5.2 Professional (569€+VAT) to check how far I can profile the startup of VS2012. The most interesting startup option is “.NET Process”. With that you can profile the next started .NET process which is very useful if you want to profile an application which is not started by you.     I did select Tracing as and Wall time to get similar options across all profilers. For some reason the attach option did not work with .NET 4.5 on my home machine. But I am sure that it did work with .NET 4.0 some time ago. Since we are profiling devenv.exe we can also select “Standalone Application” and start it from the profiler. The startup time of VS does increase about a factor 3 but that is ok. You get mainly three windows to work with. The first one shows the threads where you can drill down thread wise where most time is spent. I The next window is the call tree which does merge all threads together in a similar view. The last and most useful view in my opinion is the Plain List window which is nearly the same as the Method Grid in Ants Profiler. But this time we do get when I enable the Show system functions checkbox not a 150 but 19407 methods to choose from! I really tried with Ants Profiler to find something about out how VS does work but look how much we were missing! When I double click on a method I do get in the lower pane the called methods and their respective timings. This is something really useful and I can nicely drill down to the most important stuff. The measured time seems to be Wall Clock time which is a good thing to see where my time is really spent. You can also use Sampling as profiling method but this does give you much less information. Except for getting a first idea where to look first this profiling mode is not very useful to understand how you system does interact.   The options have a good list of presets to hide by default many method and gray them out to concentrate on your code. It does not filter anything out if you enable Show system functions. By default methods from these assemblies are hidden or if the checkbox is checked grayed out. All in all JetBrains has made a nice profiler which does show great detail and it has nice drill down capabilities. The only thing is that I do not trust its measured timings. I did fall several times into the trap with this one to optimize at places which were already fast but the profiler did show high times in these methods. After measuring with Tracing I was certain that the measured times were greatly exaggerated. Especially when IO is involved it seems to have a hard time to subtract its own overhead. What I did miss most was the possibility to profile not only the next started process but to be able to select a process by name and perhaps a count to profile the next n processes of this name. Next: YourKit

  Read the article

• An observation on .NET loops – foreach, for, while, do-while

  It’s very common that .NET programmers use “foreach” loop for iterating through collections. Following is my observation whilst I was testing simple scenario on loops. “for” loop is 30% faster than “foreach” and “while” loop is 50% faster than “foreach”. “do-while” is bit faster than “while”. Someone may feel that how does it make difference if I’m iterating only 1000 times in a loop. This test case is only for simple iteration. According to the "Data structure" concepts, best and worst cases are completely based on the data we provide to the algorithm. so we can not conclude that a "foreach" algorithm is not good. All I want to tell that we need to be little cautious even choosing the loops. Example:- You might want to chose quick sort when you want to sort more numbers. At the same time bubble sort may be effective than quick sort when you want to sort less numbers. Take a simple scenario, a request of a simple web application fetches the data of 10000 (10K) rows and iterating them for some business logic. Think, this application is being accessed by 1000 (1K) people simultaneously. In this simple scenario you are ending up with 10000000 (10Million or 1 Crore) iterations. below is the test scenario with simple console application to test 100 Million records. using System;using System.Collections.Generic;using System.Diagnostics;namespace ConsoleApplication1{ class Program { static void Main(string[] args) { var sw = new Stopwatch(); var numbers = GetSomeNumbers(); sw.Start(); foreach (var item in numbers) { } sw.Stop(); Console.WriteLine( String.Format("\"foreach\" took {0} milliseconds", sw.ElapsedMilliseconds)); sw.Reset(); sw.Start(); for (int i = 0; i < numbers.Count; i++) { } sw.Stop(); Console.WriteLine( String.Format("\"for\" loop took {0} milliseconds", sw.ElapsedMilliseconds)); sw.Reset(); sw.Start(); var it = 0; while (it++ < numbers.Count) { } sw.Stop(); Console.WriteLine( String.Format("\"while\" loop took {0} milliseconds", sw.ElapsedMilliseconds)); sw.Reset(); sw.Start(); var it2 = 0; do { } while (it2++ < numbers.Count); sw.Stop(); Console.WriteLine( String.Format("\"do-while\" loop took {0} milliseconds", sw.ElapsedMilliseconds)); } #region Get me 10Crore (100 Million) numbers private static List<int> GetSomeNumbers() { var lstNumbers = new List<int>(); var count = 100000000; for (var i = 1; i <= count; i++) { lstNumbers.Add(i); } return lstNumbers; } #endregion Get me some numbers }} In above example, I was just iterating through 100 Million numbers. You can see the time to execute various  loops provided in .NET Output "foreach" took 1108 milliseconds "for" loop took 727 milliseconds "while" loop took 596 milliseconds "do-while" loop took 594 milliseconds   Press any key to continue . . . So I feel we need to be careful while choosing the looping strategy. Please comment your thoughts. span.fullpost {display:none;}

  Read the article

• When will EBS 12.2 be released?

  - by Steven Chan (Oracle Development)

  The most frequently asked question at OpenWorld this year was, "When will EBS 12.2 be released?" Sadly, Oracle's communication policies prohibit us from speculating about release dates for unreleased software. We are not permitted to give estimates, rough timelines, guesses, or anything else that remotely resembles specific guidance on release dates. You can monitor My Oracle Support and this blog for updates on EBS 12.2.  I'll post them here as soon as they're available.  I'm embedding an old favourite from 2007 in its entirety here, since it applies equally to new releases as well as certifications. "Loose Lips Sink Ships" (March 20, 2007)If I were to sort emails in my inbox into groups, the biggest -- by far -- would be the one for emails that start with, "When will _____ be certified with the E-Business Suite?"  I answer these dutifully but know that my replies can sometimes be maddening, for two reasons:  technical uncertainty, and Oracle's rules for such communications. On the Spiral Model of CertificationsTechnology stack certifications tend to be highly iterative in nature.  As a result, statements about certification dates tend to be accurate only when made in hindsight.  Laypeople are horrified to hear this, but it's the ugly truth.  Uncertainty is simply inherent to the process.  I've become inured to it over the years, but it might come as a surprise to you that it can take many cycles to get fully-released software to work together.  Take this scenario: We test a particular combination of Component A and B. If we encounter a problem, say, with Component A, we log a bug. We receive a new version of Component A. The process iterates again. The reality is this: until a certification is completed and released, there's no accurate way of telling how many iterations are yet to come.  This is true regardless of the number of iterations that have already been completed.  Our Lips Are SealedGenerally, people understand that things are subject to change, so the second reason I can't say anything specific is actually much more important than the first.  "Loose lips might sink ships" was coined in World War II in an effort to remind people that careless talk can have serious consequences.  Curiously, this applies to Oracle's communications about upcoming features, configurations, and releases, too.  As a publicly traded company, we have very strict policies that prohibit us from linking specific releases to specific dates.  If you've ever listened to an earnings call with analysts, you'll often hear them asking, "Can you add a little more color to that statement?"  For certifications, color is usually the only thing that I have.  Sometimes I can provide a bit more information about the technical nature of the certification in question, such as expected footprints or version levels.  I can occasionally share technical issues that we've found, too, to convey the degree of risk or complexity involved in the certification.  Aside from that, there's little additional information about specific dates, date ranges, or even speculation about dates that I can provide... that is, without having one of those uncomfortable conversations with Oracle Legal.  So, as much as it pains me to do so, when it comes to dates, I'm always forced to conclude with a generic reply that blandly states one of the following: We're working on that certification right now That certification is in the pipeline but hasn't been started yet We don't have plans for that certification Don't Shoot the MessengerThankfully, I've developed a thick skin over the years -- which is a good thing, considering the colorful and energetic responses I've received over the years after answering these questions.  However, on behalf of my Oracle colleagues who are faced with these questions every day in the field, I urge you to remember that they're required to follow these same corporate rules about date disclosures.  It never hurts to ask, but don't be too disappointed if we can't provide you with a detailed answer.  The Go-Go's had it right, after all.  Related Articles Webcast Replay Available: Technical Preview of EBS 12.2 Online Patching

  Read the article

• Ask the Readers: How Many Monitors Do You Use with Your Computer?

  - by Asian Angel

  Most people have a single monitor for their computers, many have two, and some individuals enjoy “3 monitor plus” goodness. This week we would like to know how many monitors you use with your computer. Photo by DamnedNice. A good majority of people have a single monitor that they use with their computers and that single monitor serves their needs very well. It could be that these individuals do not engage in a heavy amount of work or play on their computers…they just need to do the basics like checking e-mail, using I.M., working with photos, etc. Another possibility is the use of virtual desktop software such as Dexpot, Yodm 3D, or Sysinternals Desktops on Windows systems. Linux systems such as Ubuntu already have that wonderful multi-desktop functionality built in. The wonderful part about virtual desktops is that a single monitor can feel equivalent to a small army of monitors. The ability to separate your open windows into “categories” and spread them out across multiple desktops is definitely nice. With each passing year dual monitor setups are becoming more common. Having twice the screen real-estate visible at the same time can be extremely convenient when you are multi-tasking. Perhaps you like to monitor your system’s stats and an e-mail account on the second monitor while working with software on the first. It certainly beats having windows popping up and down on your screen constantly while keeping on top of everything! Next we have the people who have three or more monitors in use with their computers. This may be a result of the type of work they do, an experiment to see if multiple monitors are right for them, or the cool, geeky factor that comes with having all those monitors. Needless to say these individuals can induce a good amount of envy and/or inspiration in the rest of us when we see their awesome setups. Are you perfectly content with a single monitor? Do you have two or more monitors that you use? If you have two or more monitors are they actually that useful to you? Perhaps you are getting ready even now to add additional monitors to your system. Whatever your situation may be at the moment, let us know your thoughts (and possible multi-monitor plans) in the comments! How-To Geek Polls require Javascript. Please Click Here to View the Poll. Latest Features How-To Geek ETC How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Is Your Desktop Printer More Expensive Than Printing Services? 20 OS X Keyboard Shortcuts You Might Not Know HTG Explains: Which Linux File System Should You Choose? HTG Explains: Why Does Photo Paper Improve Print Quality? Hidden Tracks Your Stolen Mac; Free Until End of January Why the Other Checkout Line Always Moves Faster World of Warcraft Theme for Windows 7 Ubuntu Font Family Now Available for Download Oh No! WikiLeaks Published Santa Claus’s Naughty List [Video] Remember the Milk Now Supports HTTPS Encryption for the Entire Session

  Read the article

• Criminals and Other Illegal Characters

  - by Most Valuable Yak (Rob Volk)

  SQLTeam's favorite Slovenian blogger Mladen (b | t) had an interesting question on Twitter: http://www.twitter.com/MladenPrajdic/status/347057950470307841 I liked Kendal Van Dyke's (b | t) reply: http://twitter.com/SQLDBA/status/347058908801667072 And he was right!  This is one of those pretty-useless-but-sounds-interesting propositions that I've based all my presentations on, and most of my blog posts. If you read all the replies you'll see a lot of good suggestions.  I particularly like Aaron Bertrand's (b | t) idea of going into the Unicode character set, since there are over 65,000 characters available.  But how to find an illegal character?  Detective work? I'm working on the premise that if SQL Server will reject it as a name it would throw an error.  So all we have to do is generate all Unicode characters, rename a database with that character, and catch any errors. It turns out that dynamic SQL can lend a hand here: IF DB_ID(N'a') IS NULL CREATE DATABASE [a]; DECLARE @c INT=1, @sql NVARCHAR(MAX)=N'', @err NVARCHAR(MAX)=N''; WHILE @c<65536 BEGIN BEGIN TRY SET @sql=N'alter database ' + QUOTENAME(CASE WHEN @c=1 THEN N'a' ELSE NCHAR(@c-1) END) + N' modify name=' + QUOTENAME(NCHAR(@c)); RAISERROR(N'*** Trying %d',10,1,@c) WITH NOWAIT; EXEC(@sql); SET @c+=1; END TRY BEGIN CATCH SET @err=ERROR_MESSAGE(); RAISERROR(N'Ooops - %d - %s',10,1,@c,@err) WITH NOWAIT; BREAK; END CATCH END SET @sql=N'alter database ' + QUOTENAME(NCHAR(@c-1)) + N' modify name=[a]'; EXEC(@sql); The script creates a dummy database "a" if it doesn't already exist, and only tests single characters as a database name.  If you have databases with single character names then you shouldn't run this on that server. It takes a few minutes to run, but if you do you'll see that no errors are thrown for any of the characters.  It seems that SQL Server will accept any character, no matter where they're from.  (Well, there's one, but I won't tell you which. Actually there's 2, but one of them requires some deep existential thinking.) The output is also interesting, as quite a few codes do some weird things there.  I'm pretty sure it's due to the font used in SSMS for the messages output window, not all characters are available.  If you run it using the SQLCMD utility, and use the -o switch to output to a file, and -u for Unicode output, you can open the file in Notepad or another text editor and see the whole thing. I'm not sure what character I'd recommend to answer Mladen's question.  I think the standard tab (ASCII 9) is fine.  There's also several specific separator characters in the original ASCII character set (decimal 28-31). But of all the choices available in Unicode whitespace, I think my favorite would be the Mongolian Vowel Separator.  Or maybe the zero-width space. (that'll be fun to print!)  And since this is Mladen we're talking about, here's a good selection of "intriguing" characters he could use.

  Read the article

• Memory is full with vertex buffer

  - by Christian Frantz

  I'm having a pretty strange problem that I didn't think I'd run into. I was able to store a 50x50 grid in one vertex buffer finally, in hopes of better performance. Before I had each cube have an individual vertex buffer and with 4 50x50 grids, this slowed down my game tremendously. But it still ran. With 4 50x50 grids with my new code, that's only 4 vertex buffers. With the 4 vertex buffers, I get a memory error. When I load the game with 1 grid, it takes forever to load and with my previous version, it started up right away. So I don't know if I'm storing chunks wrong or what but it stumped me -.- for (int x = 0; x < 50; x++) { for (int z = 0; z < 50; z++) { for (int y = 0; y <= map[x, z]; y++) { SetUpVertices(); SetUpIndices(); cubes.Add(new Cube(device, new Vector3(x, map[x, z] - y, z), grass)); } } } vertexBuffer = new VertexBuffer(device, typeof(VertexPositionTexture), vertices.Count(), BufferUsage.WriteOnly); vertexBuffer.SetData<VertexPositionTexture>(vertices.ToArray()); indexBuffer = new IndexBuffer(device, typeof(short), indices.Count(), BufferUsage.WriteOnly); indexBuffer.SetData(indices.ToArray()); Thats how theyre stored. The array I'm reading from is a byte array which defines the coordinates of my map. Now with my old version, I used the same loading from an array so that hasn't changed. The only difference is the one vertex buffer instead of 2500 for a 50x50 grid. cubes is just a normal list that holds all my cubes for the vertex buffer. Another thing that just came to mind would be my draw calls. If I'm setting an effect for each cube in my cube list, that's probably going to take a lot of memory. How can I avoid doing this? I need the foreach method to set my cubes to the right position foreach (Cube block in cube.cubes) { effect.VertexColorEnabled = false; effect.TextureEnabled = true; Matrix center = Matrix.CreateTranslation(new Vector3(-0.5f, -0.5f, -0.5f)); Matrix scale = Matrix.CreateScale(1f); Matrix translate = Matrix.CreateTranslation(block.cubePosition); effect.World = center * scale * translate; effect.View = cam.view; effect.Projection = cam.proj; effect.FogEnabled = false; effect.FogColor = Color.CornflowerBlue.ToVector3(); effect.FogStart = 1.0f; effect.FogEnd = 50.0f; cube.Draw(effect); noc++; }

  Read the article

• why my code still cannot connect with database? [closed]

  - by Wen Teng

  package com.mems.travis; import java.util.ArrayList; import java.util.List; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONObject; import android.app.Activity; import android.app.AlertDialog; import android.content.DialogInterface; import android.content.Intent; import android.os.AsyncTask; import android.os.Bundle; import android.util.Log; import android.view.View; import android.widget.Button; import android.widget.EditText; import android.widget.RadioButton; public class UserRegister extends Activity { JSONParser jsonParser = new JSONParser(); EditText inputName; EditText inputUsername; EditText inputEmail; EditText inputPassword; RadioButton button1; RadioButton button2; Button button3; int success = 0; // url to create new product private static String url_register_user = "http://192.168.1.100/MEMS/add_user.php"; // JSON Node names private static final String TAG_SUCCESS = "success"; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_user_register); // Edit Text inputName = (EditText) findViewById(R.id.nameTextBox); inputUsername = (EditText) findViewById(R.id.usernameTextBox); inputEmail = (EditText) findViewById(R.id.emailTextBox); inputPassword = (EditText) findViewById(R.id.pwTextBox); // Create button //RadioButton button1 = (RadioButton) findViewById(R.id.studButton); // RadioButton button2 = (RadioButton) findViewById(R.id.shopownerButton); Button button3 = (Button) findViewById(R.id.regSubmitButton); // button click event button3.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { String name = inputName.getText().toString(); String username = inputUsername.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); if (name.contentEquals("")||username.contentEquals("")||email.contentEquals("")||password.contentEquals("")) { AlertDialog.Builder builder = new AlertDialog.Builder(UserRegister.this); // 2. Chain together various setter methods to set the dialog characteristics builder.setMessage(R.string.nullAlert) .setTitle(R.string.alertTitle); builder.setPositiveButton(R.string.ok, new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { // User clicked OK button } }); // 3. Get the AlertDialog from create() AlertDialog dialog = builder.show(); } else { new RegisterNewUser().execute(); } } }); } class RegisterNewUser extends AsyncTask<String, String, String>{ protected String doInBackground(String... args) { String name = inputName.getText().toString(); String username = inputUsername.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("name", name)); params.add(new BasicNameValuePair("username", username)); params.add(new BasicNameValuePair("email", email)); params.add(new BasicNameValuePair("password", password)); // getting JSON Object // Note that create product url accepts POST method JSONObject json = jsonParser.makeHttpRequest(url_register_user, "GET", params); // check log cat for response Log.d("Send Notification", json.toString()); try { int success = json.getInt(TAG_SUCCESS); if (success == 1) { // successfully created product Intent i = new Intent(getApplicationContext(), StudentLogin.class); startActivity(i); finish(); } else { // failed to register } } catch (Exception e) { e.printStackTrace(); } return null; } } }

  Read the article

• No access to Samba shares

  - by koanhead

  I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

  Read the article

• Project Time Tracker

  - by Geertjan

  Based on yesterday's blog entry, let's do something semi useful and display, in the project popup, which is available when you right-click a project in the Projects window, the time since the last change was made anywhere in the project, i.e., we can listen recursively to any changes done within a project and then update the popup with the newly acquired information, dynamically: import java.awt.event.ActionEvent; import java.text.DateFormat; import java.text.SimpleDateFormat; import java.util.ArrayList; import java.util.Collection; import java.util.List; import javax.swing.AbstractAction; import org.netbeans.api.project.Project; import org.netbeans.api.project.ProjectUtils; import org.openide.awt.ActionID; import org.openide.awt.ActionReference; import org.openide.awt.ActionRegistration; import org.openide.awt.StatusDisplayer; import org.openide.filesystems.FileAttributeEvent; import org.openide.filesystems.FileChangeListener; import org.openide.filesystems.FileEvent; import org.openide.filesystems.FileRenameEvent; import org.openide.util.Lookup; import org.openide.util.LookupEvent; import org.openide.util.LookupListener; import org.openide.util.Utilities; import org.openide.util.WeakListeners; @ActionID( category = "Demo", id = "org.ptt.TrackProjectSelectionAction") @ActionRegistration( lazy = false, displayName = "NOT-USED") @ActionReference( path = "Projects/Actions", position = 0) public final class TrackProjectSelectionAction extends AbstractAction implements LookupListener, FileChangeListener { private Lookup.Result<Project> projects; private Project context; private Long startTime; private Long changedTime; private DateFormat formatter; private List<Project> timedProjects; public TrackProjectSelectionAction() { putValue("popupText", "Timer"); formatter = new SimpleDateFormat("HH:mm:ss"); timedProjects = new ArrayList<Project>(); projects = Utilities.actionsGlobalContext().lookupResult(Project.class); projects.addLookupListener( WeakListeners.create(LookupListener.class, this, projects)); resultChanged(new LookupEvent(projects)); } @Override public void resultChanged(LookupEvent le) { Collection<? extends Project> allProjects = projects.allInstances(); if (allProjects.size() == 1) { Project currentProject = allProjects.iterator().next(); if (!timedProjects.contains(currentProject)) { String currentProjectName = ProjectUtils.getInformation(currentProject).getDisplayName(); putValue("popupText", "Start Timer for Project: " + currentProjectName); StatusDisplayer.getDefault().setStatusText( "Current Project: " + currentProjectName); timedProjects.add(currentProject); context = currentProject; } } } @Override public void actionPerformed(ActionEvent e) { refresh(); } protected void refresh() { startTime = System.currentTimeMillis(); String formattedStartTime = formatter.format(startTime); putValue("popupText", "Timer started: " + formattedStartTime + " (" + ProjectUtils.getInformation(context).getDisplayName() + ")"); } @Override public void fileChanged(FileEvent fe) { changedTime = System.currentTimeMillis(); formatter = new SimpleDateFormat("mm:ss"); String formattedLapse = formatter.format(changedTime - startTime); putValue("popupText", "Time since last change: " + formattedLapse + " (" + ProjectUtils.getInformation(context).getDisplayName() + ")"); startTime = changedTime; } @Override public void fileFolderCreated(FileEvent fe) {} @Override public void fileDataCreated(FileEvent fe) {} @Override public void fileDeleted(FileEvent fe) {} @Override public void fileRenamed(FileRenameEvent fre) {} @Override public void fileAttributeChanged(FileAttributeEvent fae) {} } Some more work needs to be done to complete the above, i.e., for each project you somehow need to maintain the start time and last change and redisplay that whenever the user right-clicks the project.

  Read the article

• No access to Samba shares

  - by koanhead

  I have three shared folders in my local home directory- that is to say, on my Ubuntu desktop's /home/me/. All were set up using "Sharing Options" in Nautilus' right-click menu. The standard "Music" and "Videos" folders are configured identically: the "Guest Access" box is checked, but the "Allow others to create and delete" is not. The third folder, called "shared", is configured to not allow Guest access but to allow others to modify files. I have not altered /etc/samba/smb.conf by hand, I have only used Sharing Options to create and modify these so-called "shares". My roommates have two Windows 7 computers and one Ubuntu Netbook Remix netbook. I have the aforementioned desktop machine and laptop running 10.04. None of these machines can access any of the shares. Attempts to access the Guest shares result in the message \\machine\directory is not accessible. The network name could not be found. This is the error message generated by a VM running Windows 2000. The other Windows machines generate a similar error. The Ubuntu laptop gives the error Unable to mount location: Failed to mount Windows share. Hurrah, once again, for informative error messages. That really helps a lot. When attempting to browse the folder called "shared" from the laptop, I'm confronted with a password dialog. This behavior is the same will all machines I've tried in the situation. On entering my username and password for the account to which the shares belong, the password dialog briefly disappears and is replaced with an identical dialog. No error message, useful or not, appears. When attempting to browse this folder with the VM, the outcome is the same except that the password dialog helpfully states "incorrect username or password". My assumption is that the username and password in question is that of the user which owns the shares. I have tried all other username and password combinations available in this context and the outcome is the same. I would like to be able to share files. Sharing them with Windows machines is a nice feature, or would be if it was available. Really I consider sharing files between two machines with the same version of the same operating system kind of a minimum condition for network usability. Samba last functioned reliably for me more than ten years ago. I have attempted to use it on and off since then with only intermittent success. Oh, and "Personal File Sharing" from the Preferences menu does not result in an entry in Places → Network → my-server. In fact, the old entry "MY-SERVER" goes away and is replaced by "koanhead's public files on my-server", which when I attempt to open it from the laptop gives a "DBus.Error.NoReply: Message did not receive a reply." I know I come here and gripe about Ubuntu a lot, but on the other hand I spend literally hours every day trying to fix things in Ubuntu. It's a good system which aspires to greatness, which is why things like this either Need to work; or Be adequately documented. Ideally both would be the case. Anyway, rant over. Hopefully someone will have some insight on this issue. Thanks all who bother to read this wall o'text for your time.

  Read the article

• My Favorite Free Windows Phone Twitter App

  - by Tim Murphy

  Windows Phone 7 has been out for about two years now.  In that time I have switched back and forth with different free Twitter apps.  Mostly the has been because someone has mentioned one or another that they like.  I figured I would give a quick run down of what I felt were the pros and cons of each.  These are only the ones that I have used and your mileage may vary.  So here we go. WP7 Built-In Twitter Functionality While it is great that Microsoft put this functionality in, it is extremely limited in usefulness.  Some apps leverage it to allow you to share pictures or information they contain.  In all though, I don’t use it unless it is the quickest way to get something out. Official Twitter App The official Twitter app isn’t a very big step up from the phone functionality.  It gives you a better timeline view and better attachment handling, but it makes you bounce to a browser page to see images that are linked to a tweet. TweetCaster This was my main Twitter app for quite a while.  It is the only one with InstaPaper integration so that you can save you a tweet and review it later.  My main problem is that it crashes too much when it can’t find a connection.  It also only previews yfrog and twitpic images and only once you go to the detail of a tweet.  Other than that it is a solid Twitter client. moTweets This is my current favorite. It has nice image display in your timeline which I have not seen on any of the other apps.  There are two modes that you can use with this app.  The first is standard to most Twitter apps that allows you to navigate to a tweet and do the usual operations.  The second is what they call Quick Buttons.  In this case you do not see the content of the tweet but go straight to the let’s get something done stage.  It is an interesting take.  I do miss the Instapaper integration and it has a tendency to show a blank timeline list once in a while after you view detail entry.  If you scroll the list it restore your timeline, but you lose you place and are put to the first entry. Seesmic I am not very fond of this app.  The first thing is that it makes you pick a “Space” when you enter the app.  This is really “which account do you want to see”.  On top of that it does not show who retweeted an entry in your timeline and then only tells you how many people RT the post when you look at the detail.  There is a Speak feature that will read you a single tweet, but you have to navigate to the tweet and then to a menu to make it work.  We will have to see if this gets better with the features in Windows Phone 8.  Other than that it is another basic feature app.  Summary In the end I am sticking with moTweets.  I would appreciate it if they added the Instapaper capability and fixed the one bug.  If they did that I would be really happy with the product. del.icio.us Tags: Twitter,Windows Phone 7,WP7,TweetCaster,moTweets,Seesmic

  Read the article

• PHP, javascript, single quote problems with IE when passing variable from ajax post to javascript fu

  - by Mattis

  Hi! I have been trying to get this to work for a while, and I suspect there's an easy solution that I just can't find. My head feels like jelly and I would really appreciate any help. My main page.php makes a .post() to backend.php and fetches a list of cities which it echoes in the form of: <li onclick="script('$data');">$data</li> The list is fetched and put onto the page via .html(). My problem occurs when $data has a single quote in it. backend.php passes the variable just fine to page.php but when i run html() it throws a javascript error (in IE, not FF obviously); ')' is expected IE parses the single quote and messes up the script()-call. I've been trying to rebuild the echoed string in different ways, escaping the 's on the php side and/or on the javascript side - but in vain. Do I have to review the script in total? page.php $.post("backend.php", {q: ""+str+""}, function(data) { if(data.length >0) { $('#results').html(data); } backend.php while ($row = $q->fetch()) { $city = $row['City']; // $city = addslashes($row['City']); // $city = str_replace("'","&#39;",$row['City']); echo "<li onclick=\"script('$city');\">".$city."</li>"; }

  Read the article

• How to get foreignSecurityPrincipal from group. using DirectorySearcher

  - by kain64b

  What I tested with 0 results: string queryForeignSecurityPrincipal = "(&(objectClass=foreignSecurityPrincipal)(memberof:1.2.840.113556.1.4.1941:={0})(uSNChanged>={1})(uSNChanged<={2}))"; sidsForeign = GetUsersSidsByQuery(groupName, string.Format(queryForeignSecurityPrincipal, groupPrincipal.DistinguishedName, 0, 0)); public IList<SecurityIdentifier> GetUsersSidsByQuery(string groupName, string query) { List<SecurityIdentifier> results = new List<SecurityIdentifier>(); try{ using (var context = new PrincipalContext(ContextType.Domain, DomainName, User, Password)) { using (var groupPrincipal = GroupPrincipal.FindByIdentity(context, IdentityType.SamAccountName, groupName)) { DirectoryEntry directoryEntry = (DirectoryEntry)groupPrincipal.GetUnderlyingObject(); do { directoryEntry = directoryEntry.Parent; } while (directoryEntry.SchemaClassName != "domainDNS"); DirectorySearcher searcher = new DirectorySearcher(directoryEntry){ SearchScope=System.DirectoryServices.SearchScope.Subtree, Filter=query, PageSize=10000, SizeLimit = 15000 }; searcher.PropertiesToLoad.Add("objectSid"); searcher.PropertiesToLoad.Add("distinguishedname"); using (SearchResultCollection result = searcher.FindAll()) { foreach (var obj in result) { if (obj != null) { var valueProp = ((SearchResult)obj).Properties["objectSid"]; foreach (var atributeValue in valueProp) { SecurityIdentifier value = (new SecurityIdentifier((byte[])atributeValue, 0)); results.Add(value); } } } } } } } catch (Exception e) { WriteSystemError(e); } return results; } I tested it on usual users with query: "(&(objectClass=user)(memberof:1.2.840.113556.1.4.1941:={0})(uSNChanged>={1})(uSNChanged<={2}))" and it is work, I test with objectClass=* ... nothing help... But If I call groupPrincipal.GetMembers,I get all foreing user account from group. BUT groupPrincipal.GetMembers HAS MEMORY LEAK. Any Idea how to fix my query????

  Read the article

• post xml to Spring REST server returns Unsupported Media Type

  - by Mayra

  I'm trying to create a simple spring based webservice that supports a "post" with xml content. In spring, I define an AnnotationMethodHandler: <bean id="inboundMessageAdapter" class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter"> <property name="messageConverters"> <util:list> <bean class="org.springframework.http.converter.xml.MarshallingHttpMessageConverter"> <property name="marshaller" ref="xmlMarshaller"/> <property name="unmarshaller" ref="xmlMarshaller"/> </bean> </util:list> </property> </bean> And a jaxb based xml marshaller: <bean id="xmlMarshaller" class="org.springframework.oxm.jaxb.Jaxb2Marshaller"> <property name="contextPaths"> <array> <value>com.company.schema</value> </array> </property> <property name="schemas"> <array> <value>classpath:core.xsd</value> </array> </property> </bean> My controller is annotated as follows, where "Resource" is a class autogenerated by jaxb: @RequestMapping(method = POST, value = "/resource") public Resource createResource(@RequestBody Resource resource) { // do work } The result of a webservice call is always "HTTP/1.1 415 Unsupported Media Type". Here is an example service call: HttpPost post = new HttpPost(uri); post.addHeader("Accept", "application/xml"); post.addHeader("Content-Type", "application/xml"); StringEntity entity = new StringEntity(request, "UTF-8"); entity.setContentType("application/xml"); post.setEntity(entity); It seems to me that I am setting the correct media type everywhere possible. Anyone have an ideas?

  Read the article

• SharePoint 2010 - Client Object Model - Add attachment to ListItem

  - by Thorben

  Hi, I have a SharePoint List to which I'm adding new ListItems using the Client Object Model. Adding ListItems is not a problem and works great. Now I want to add attachments. I'm using the SaveBinaryDirect in the following manner: File.SaveBinaryDirect(clientCtx, url.AbsolutePath + "/Attachments/31/" + fileName, inputStream, true); It works without any problem as long as the item that I'm trying to add the attachment to, already has an attachment that was added through the SharePoint site and not using the Client Object Model. When I try to add an attachment to a item that doesnt have any attachments yet, I get the following errors (both happen but not with the same files - but those two messages appear consistently): The remote server returned an error: (409) Conflict The remote server returned an error: (404) Not Found I figured that maybe I need to create the attachment folder first for this item. When I try the following code: clientCtx.Load(ticketList.RootFolder.Folders); clientCtx.ExecuteQuery(); clientCtx.Load(ticketList.RootFolder.Folders[1]); // 1 -> Attachment folder clientCtx.Load(ticketList.RootFolder.Folders[1].Folders); clientCtx.ExecuteQuery(); Folder folder = ticketList.RootFolder.Folders[1].Folders.Add("33"); clientCtx.ExecuteQuery(); I receive an error message saying: Cannot create folder "Lists/Ticket System/Attachment/33" I have full administrator rights for the SharePoint site/list. Any ideas what I could be doing wrong? Thanks, Thorben

  Read the article

• [WPF] Custom TabItem in TabControl

  - by Simon

  I've created CustomTabItem which inherits from TabItem and i'd like to use it while binding ObservableCollection in TabControl <TabControl ItemsSource="{Binding MyObservableCollection}"/> It should like this in XAML, but i do not know how change default type of the output item created by TabControl while binding. I've tried to create converter, but it has to do something like this inside convertin method: List<CustomTabItem> resultList = new List<CustomTabItem>(); And iterate through my input ObservableCollection, create my CustomTab based on item from collection and add it to resultList... I'd like to avoid it, bacause while creating CustomTabItem i'm creating complex View and it takes a while, so i don't want to create it always when something change in binded collection. My class extends typical TabItem and i'd like to use this class in TabControl instead of TabItem. <TabControl.ItemContainerStyle> <Style TargetType="{x:Type local:CustomTabItem}"> <Setter Property="MyProperty" Value="{Binding xxx}"/> </Style> </TabControl.ItemContainerStyle> Code above generates error that Style cannot be applied to TabItem. My main purpose is to use in XAML my own CustomTabItem and bind properties... Just like above... I've also tried to use <TabControl.ItemTemplate/> <TabControl.ContentTemaplte/> But they are just styles for TabItem, so i'll still be missing my properties wchich i added in my custom class.

  Read the article

< Previous Page | 577 578 579 580 581 582 583 584 585 586 587 588  | Next Page >