Search Results

Search found 3229 results on 130 pages for 'sysadmin geek'.

Page 59/130 | < Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >

• certain thumbdrives keep a system from going out of the boot screen

  - by The Journeyman geek

  I have an old r51 which i boot off usb. Apparently, if i have a toshiba 2gb thumbdrive similar to this plugged in, or an old imation 1gb drive plugged in, it won't boot at all- it freezes in the bios loading screen until its unplugged. I need to try it on another system but i'm wondering what could be causing it- since i suppose this is at a lower level than filesystem, and the drives work fine otherwise - even being readable if inserted after the system is booted from another source, with neither drive plugged in

  Read the article

• Physical-to-virtual for personal use

  - by Journeyman Geek

  One of my current projects involves reducing the number of old computers lying around. So far, the office systems have been downsized from 5 to 2. One system which had no data on it was dumped entirely, while three other identical boxes were consolidated into to one (I swap hard drives as needed and they just work(tm)). I want to make further cuts. The physical systems in question all run windows xp sp3, and were old Pentium 4s with 256 MB of RAM. Currently, I have got a VirtualBox running on another system. My intention is to migrate all services to that. We can assume that disk space and RAM on the host is not an issue. I'd rather not go with a client-server physical-to-virtual (P2V) method like what VirtualBox uses now. I have a few specific concerns as well - specifically whether I'd need to reactivate or sysprep for dissimilar hardware first. An offline tool for imaging (Windows or Linux) would not be an issue since the drives could be mounted onto another system I have anyway or I could use a LiveCD. What would be my options for P2V conversion, and what would I need to keep in mind when doing this?

  Read the article

• AIX network parameters to close TCP sockets of unplugged devices

  - by ADD Geek

  Hi there We have an AIX box, running what we call in banking "ATM Switch" not the ATM networking switch, but the bank ATM driver. where we have some ATM machines connected to two server processes. The problem is, when we disconnect any of these machines, the netstat -na| grep <port number> command shows that the socket established for this disconnected device is still established, we have to manually send a command from the software to make the socket aware that it is not live anymore. Is there a parameter on tcp level to make this connection aware within a minute or two that this device is not connected anymore? we had the following parameters set with root privileges: no -o tcp_keepidle=1000 no -o tcp_keepcnt=2 no -o tcp_keepintvl=150 no -o tcp_finwait2=100 it was originally having the default values. but even after we changed these parameters and restarted the server processes, the problem was still there.

  Read the article

• alternatives to altaris/symentec SVS

  - by The Journeyman geek

  I use an old copy of altaris SVS (link to lifehacker - symentec gutted the old altaris website) for testing applications - it lets me capture the changes one executable makes, or changes to a whole system into a bundle, and remove the whole bundle once i'm done. However symentec bought over altaris and apparently killed off the product, or merged it into some other bigger product. I'd like the same fine grained control SVS had, something that just does this, and preferably free (for personal use) or not too expensive. I'd like this to run on at least windows XP 32 bit, but windows 7 and 64 bit support would be nice too

  Read the article

• Converting a VMware player image from non-persistant to persistant

  - by Journeyman Geek

  I'm pondering setting up a virtual machine to generate app-v (since i got mdop from school) or thinapp application virtualisation packages. Ideally with either of these, i should work off a fresh system do the install, then copy out the packages produced. I'd like to not have to reinstall windows per package to get a fresh, unmodified stock copy of windows. I'm aware that its possible to make a hard disk image persistant in vmware player (one of my lecturers did it, but he's in another country). I'm wondering how would i convert a persistant image to a non persistant one? I'm currently running vmware player 4, with windows 7 guest and host.

  Read the article

• Free Video Editing Software for windows with storyboard mode

  - by The Journeyman geek

  My dad's currently using windows movie maker to try to make a video out of a series of JPEG images and some MP3s. He's not very happy with it, since Windows movie maker seems to downsample the source images he's used, and not very efficently - despite them being the same resolution as the output WMM is supposed to make, and the replaygain based audio level normalisation on the tracks don't work. So, i'd want a free programme that has storyboard mode (else i'd use visualdub) that'll not try to change the resolution of images used to make a video (assuming all images are the same resolution), and preferably accept the normalised mp3 files we're using. WMM isn't a option, since Its what i'm trying to find a replacement for.

  Read the article

• routing wiredness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router.

  Read the article

• Folder Size Column on Explorer on Windows Vista/Seven

  - by Click Ok

  I'm a big fan of FolderSize, but unfortunately it works only on Windows XP. Even reading this and this, I'm not convinced that I cannot to have a column showing the folder size on Windows Explorer. Even with all "problems" FolderSize worked like a charm in WindowsXP. In a sysadmin life, FolderSize is explendid. Before select a lot of folders to send to backup in DVDs, I can check directly in Windows Explorer the size of the folders and get a set of folders with 4.3Gb to burn in a DVD. In another situation, I can view in the root folder the size of the bigger folders in the hard drive and start a good strategy of backup/partitioning/transfer to another drive/etc. If desired, I can tell a lot of another needs that in my sysadmin life I need a tool like FolderSize... There is someone that is actively developing a solution to show folder size on Windows Explorer in Vista/Seven Windows? What the problems that I can face if I develop myself that "add-in" for Windows Explorer?

  Read the article

• Alternatives to musicbrainz picard -audio-fingerprinting tagging services [closed]

  - by Journeyman Geek

  Possible Duplicate: Auto-tagging MP3s I'm currently using musicbranz picard to tag files that don't have any usable tagging information. For some reason, currently none of the files I trying to ID seem to be identified, despite some of them them being artists who are almost certainly on musicbrainz. So, I'm looking for something that uses an alternate database and does the same thing - to identify unknown music files off an audio fingerprint. Windows is preferred, but I would be fine with any of the big 3 OSes (Windows/Linux/OS X).

  Read the article

• Using WebSphere CloudBurst with PowerVM to AIX virtualization over a cloud

  - by ADD Geek

  hi there we are studying the virtualization option to reduce our datacenter cost, and this research was assigned to me. we looked into alternatives and we almost reached a conclusion that PowerVM is the only option to virtualize pSeries servers. we found no signs of cloud support explicitly mentioned in any document, however there was the mention of CloudBurst. from the videos we watched and the documents we read, it seems that CloudBurst is more oriented towards Application Servers (WebSphere Software). but our environment is not relying only on WebSphere. we have some banking applications, Oracle Databases and MQ/Broaker. the question is: 1- can we virtualize the existing applications (all running AIX) on a cloud running on top of some of the existing servers? (given that we do the sizing properly) 2- is PowerVM to run on top of CloudBurst? 3- if the above solution is applicable, is this some sort of HA solution (since the VM will run on top of multiple physical boxes, while the same physical box will run multiple live images) thanks for your help

  Read the article

• How do you keep track of applications for specific purposes

  - by The Journeyman geek

  I tend to have a handful of 'core' applications that cover most of what i need. On the other hand, there tend to be some programmes that i need once in a blue moon, and i'm finding that i'm forgetting what they are. At one point i had a wiki for it, but i'm curious how other people handle the problem. So, what's the means that you use to keep a database or other record of rarely used, but useful applications?

  Read the article

• Is there such a thing as an IP femtocell, and what does it do?

  - by The Journeyman geek

  My dad mentioned a co-worker suggested using a device, that might use CDMA to route calls through IP to save costs on a certain overseas project we're on- since our home base is quite far from there. I've never heard of such a device, so if it does exist, I'm wondering, if it's specific to particular ISPs, or if you can just pick one off the shelf, plug it into an arbitrary Internet connection, and make calls using it and a cellphone of some sort? As you can tell, details are sketchy, so... if such a device doesn't exist, saying so might be a right answer ;)

  Read the article

• Where exactly are shortcuts to the Windows Modern UI apps stored in windows 8?

  - by Journeyman Geek

  I'm trying to mess around with starting up modern UI applications from the desktop and various other wierdness. While I've been digging, I can't seem to work out where exactly the shortcuts to windows modern UI apps are stored. With my classic desktop applications they are in C:\ProgramData\Microsoft\Windows\Start Menu\Programs. The modern UI stuff dosen't turn up though. Where are the shortcuts to the modern UI apps stored so that the start screen can find them?

  Read the article

• Linux ncurses outliner options

  - by geek

  I'm looking for a replacement for hnb, which served me well but seems to be abandoned. Please do not suggest text-editor based approaches like emacs org mode or vim outliner. I want a stand-alone tool, preferably written in Python, with ncurses interface (so it could run on Linux with no X server).

  Read the article

• good, simple music streaming for windows?

  - by The Journeyman geek

  I've been using itunes to stream music over lan, and quite frankly the quality is terrible. On the other hand, its ease of use - having a simple client on either end, and it just 'working' with full control on my end is nice- the quality however is terrible - I'm wondering if there's any controllable streaming remote music serve for windows that will let me pick the bitrate it sends at, or uses whatever bitrate the original file is in, and just sends it, and has itself controllable at the client end, and will work acceptably over a wlan connection

  Read the article

• Fixed width, free, sans serif fonts

  - by The Journeyman geek

  I'm a dyslexic and i generally use arial for most things, since its probably the most readable font for me. However i'd like to have a fixed width font with similar charecteristics (sans serif, distinct, 'simple' characters etc) since some things break with non fixed width fonts, but at the same time, most of the 'standard' fonts are harder to read for me- any suggestions?

  Read the article

• is there such a thing as a ip femtocell, and what does it do?

  - by The Journeyman geek

  My dad mentioned a co-worker suggested using a device, that might use cdma to route calls through IP to save costs on a certain overseas project we're on- since our home base is quite far from there. I've never heard of such a device, so if it does, i'm wondering, if its specific to particular ISPs, or if you can just pick one off the shelf, plug it into an arbitraty internet connection, and make calls using it and a cellphone of some sort? As you can tell, details are sketchy, so... if such a device dosen't exist, saying so might be a right answer ;)

  Read the article

• How do I stop GNU Freetalk from automatically filling in the buddy name?

  - by Journeyman Geek

  I'm using GNU Freetalk along with expect in order to send notifications to my phone – Freetalk has a readline interface, and I use expect to make a series of non interactive scripts that send information to another Jabber account. I'd like to have these scripts end freetalk 'properly' – that is to say user@domainname message one user@domainname message two /quit which would print out message one message two then quit. However Freetalk 'helpfully' adds user@domainame automatically so I get message one message two /quit as the output. The expect script still ends, but there's a delay. How would I stop Freetalk from adding in the 'buddy' address automatically?

  Read the article

• is there any valid reason for users to request phpinfo()

  - by The Journeyman geek

  I'm working on writing a set of rules for fail2ban to make life a little more interesting for whoever is trying to bruteforce his way into my system. A good majority of the attempts tend to revolve around trying to get into phpinfo() via my webserver -as below GET //pma/config/config.inc.php?p=phpinfo(); HTTP/1.1 GET //admin/config/config.inc.php?p=phpinfo(); HTTP/1.1 GET //dbadmin/config/config.inc.php?p=phpinfo(); HTTP/1.1 GET //mysql/config/config.inc.php?p=phpinfo(); HTTP/1.1 I'm wondering if there's any valid reason for a user to attempt to access phpinfo() via apache, since if not, i can simply use that, or more specifically the regex GET //[^>]+=phpinfo\(\) as a filter to eliminate these attacks

  Read the article

• Badwidth-Hogging Linux Server Causing Trouble

  - by BlairHippo

  We have a Linux server (2.6.28-11-generic #42-Ubuntu) that's misbehaving on a client site, gobbling up an entirely unacceptable percentage of the client's bandwidth, and we're trying to figure out what the heck it's doing. And the guy who had the sysadmin skillset has yet to be replaced. We're at a loss for what could be causing all that network traffic, and need to figure it out SOON. What log files should I be looking at to find this information? What analysis tools would you recommend for this task? Please note that I'm not looking for a tool that will allow me to analyze FUTURE traffic. The client is on the verge of shutting the machine off entirely; I need to figure out what it's been doing with the data I already have, if that's at all possible. My thanks in advance for helping a development monkey play sysadmin.

  Read the article

• further troubleshooting on a p8z77 motherboard

  - by Journeyman Geek

  I just bought a brand now asus p8z77 motherboard with a intel 3770. Its currently not booting - the system powers up for half a second and then powers down, and the CPU error light shines. I've tried switching ram between slots, switching PSUs, updating the bios (which can be done sans processor or ram on this model). Power: The 8 pin power connector is definitely in place correctly, and I've tried swapping PSUs between a new seasonic m12, and a known good cheapie PSU Ram: Ram is in the recommended slot for single stick operation, and tried swapping between the two sticks of DDR3 I have. Processor: Its installed correctly as far as I can tell, no obvious bent pins on the motherboard. At this point I'm guessing I'll need to RMA something. Are there any 'definitive' tests I can try, short of swapping CPU and motherboard that would let me know it is the CPU? Can I actually trust the error light on the motherboard?

  Read the article

• routing weirdness - traceroute 'vanishes' en route

  - by The Journeyman geek

  I'm attempting to set up one of my boxes as a server (again), but i'm having some odd connection issues- the box itself connects fine to the internet, but trying to connect to my external ip address seems to result in the trace getting 'lost' partway. http://pastebin.com/HCQAGbvn - this is a traceroute from another system that's connected to another ISP - starhub is my own one, while i have another system that i have access to on singtel. I'm wondering if my ISP is messing around with routing, or is something very odd going on. As you note, the traceroute dosen't reach me, but if it helps, i use a dd-wrt router. edit: Facepalmishly, turning the firewall on my router on and off fixed it. I don't get why it dropped off at different ip addresses each time, or why the router set it self to block.. everything, or why it affected the ipv6 tunnel as well.

  Read the article

• Making audio CDs en mass - Linux based solutions?

  - by The Journeyman geek

  My mom's sings and gives away cds to people. Invariably it falls to me to have to burn cds for her, and burning 50-100 cds on a single drive is a pain. I DO have a handful of cd burners and a slightly geriatric old PIII 450. This is what i want to be able to do - either point an application at a folder of WAV or MP3s, say how many copies i need on CLI (since then i can SSH into the system and use it headless) feed 2 or more CD burners cds until its done, OR pop in a single CD into a master drive and have its contents duplicated to 2 or more burners. I'd rather have it running on linux, be command line based, and be as little work as possible - almost automatic short of telling it how many copies i want would be ideal. I'm sure i'll have people wondering about legality - My mom sings her own music, and its classical, and older than copyright law, so, that's a non issue. I just want a way to make this chore a little easier, short of telling my mom to do it herself.

  Read the article

• What is windows 8 core?

  - by Journeyman Geek

  I've found some references, when looking for information on WAIK installs of windows 8 of a varient called windows 8 core, that can be installed off the professional edition disk. There's also a mention of it on winsupersite that says The cheapest, called MSDN Operating Systems, costs $699 a year ($499 renewal), and of course includes Windows 8 (Core), Windows 8 Pro, and Windows 8 Enterprise. You get five licenses each for Windows 8 Core and Pro, and one Multiple Activation Key (MAK) for Windows 8 Enterprise. What is windows 8 core? Is it the new 'home' edition or something else? What differentiates it from the pro and enterprise editions?

  Read the article

• Make Google Chrome "Application" Windows Use High-Quality Icons in Windows 7

  - by The How-To Geek

  Whenever I use Google Chrome's "Create Application" shortcut (which I heavily use, and recommend), the icons shown on the Windows 7 taskbar are really blurry, probably the result of the 16x16 favicon being stretched out. I'd like to be able to replace these with another, high-quality icon, but even when I replace the cached file, it doesn't update for some reason. For reference, here's the path to the icon, for Gmail, at least. I'm also using the latest Dev channel version of Chrome. %USERPROFILE%\AppData\Local\Google\Chrome\USERDA~1\Default\PLUGIN~1\GOOGLE~1\mail.google.com\https_443\icons#desktop\

  Read the article

< Previous Page | 55 56 57 58 59 60 61 62 63 64 65 66  | Next Page >