Search Results

Search found 5954 results on 239 pages for 'cpu cores'.

Page 6/239 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

  • Three server processes consume no more than 50% of Dual Core CPU

    - by thor
    I have three processes running on Intel Core 2 Duo CPU. From watching output of 'top' and graphs of CPU load (drawn by MRTG, data collection via SNMP) I can see that CPU load is never more than 50%, and, most of the day, when those processes are busy CPU load has a ceiling at 50 %. I mean, CPU load grows up to 50% in the morning and stays there until late evening. My first thought was that only one core was used at 100% thus giving 50% of both CPUs. But, as there are three processes running and from 'top' I see that both cores are being loaded, so this is not the case. schedtool shows that CPU affinity for those three processes is at default, 0x03, allowing them to use both cores. If I force one process to one core (schedtool -a 0x01), and two others to second (schedtool -a 0x02), cumulative usage grows beyond 50%. Why three processes seem to consume only 50% of two cores? Why forcing them to different CPUs allows usage to grow higher? Any hints? P.S. Processes in question are Counter-Strike servers.

    Read the article

  • Troubleshooting an overheating CPU

    - by Jeff Fry
    I & my father just recently put together a new PC. Specs below. From the very beginning, on boot it will often complain that the CPU is too hot. If I sit in BIOS and watch the CPU, it'll drop back down from red to blue (<72C), at which point I've tended to just boot into Windows...and haven't had any problems. In fact, I've played a couple hours straight of Skyrim at max settings, and not had any visible issues. That said, I've occasionally walked away & come back to find that it's crashed. Yesterday, it crashed (while idle) twice in 12 hours, which shifted the balance from busy-with-life to nervous-I'm-about-to-melt-something. I just installed Core Temp which is showing my 4 cores fluxuating between 70-98C. I'm guessing at this point that the CPU fan may be incorrectly installed or defective. My first thought is to either (a) add water cooling (which the case supports) and / or (b) replace the CPU fan with an after-market one. That said, I'm very open to suggestions. A note, while I certainly don't want to burn money here, I have a baby coming any day now and am still unpacking from a recent move so if I have a choice between an option that costs money and another that takes a while...I'll happily spend a bit extra. Side question: Should I be nervous to even have this on at this point? Let me know if there's something useful I could add to my report. Otherwise, I'm looking forward to your suggestions! Thanks. CPU Intel i7-2600 CPU w/ stock fan Other HW ASUS P8Z68-V Pro motherboard 64G SSD boot drive 4 older SATA HDs GIGABYTE ATI Radeon HD6950 1 GB DDR5 8G Kingston T1 Series RAM Corsair 650W Gold Certified power supply Antec P280 case

    Read the article

  • CPU usage always below 10% in windows server 2008 r2 x64

    - by ???
    I am using a server with windows server 2008 r2 running on it to run my program. The CPU of the server is Intel xeon x5570 2.93GHz with 2 processors, 8 cores per processer. However, I found that the cpu usage is almost always below 10% even I use 32 threads in my program. And I also found that sometimes the cpu usage could reach as high as 93% through the task manager when running my program and at that moment my program has processed over 1000 files per second while normally, it only processed over 50 files per second. However, this does not happen often. I use tools downloaded from the internet to make sure no core sleeps when the server is on, nothing changed. Also, I edited the windows register to make sure that I, as an administer, have no cpu usage limit. But it changed nothing. Is there anyway that I can make full use of my cpu? That is to say that each core runs a thread of my program and the total cpu usage could reach over 50% when I use a reasonable number of threads in my program. Did this happen to anyone of you? And could you help me with this ? Thank you!

    Read the article

  • Server high CPU load issue! ( Cpanel + CentOS 5)

    - by kenby
    Our server cpu load is high todays sometimes reaches to 560! .. We have the lastest Cpanel/whm and the kernel is update!while the load average is : Load Averages: 39.05 75.01 45.33 the apache log is: Current Time: Sunday, 30-Jan-2011 01:50:13 EST Restart Time: Saturday, 29-Jan-2011 21:51:20 EST Parent Server Generation: 2 Server uptime: 3 hours 58 minutes 53 seconds Total accesses: 149493 - Total Traffic: 2.4 GB CPU Usage: u9.17 s10.66 cu42.82 cs0 - .437% CPU load 10.4 requests/sec - 174.6 kB/second - 16.7 kB/request 121 requests currently being processed, 42 idle workers W_WWW.W_..W.W_W_WCWW..W...W.WWW.WWWW.WW.C_W_.W.WW.WC..W.WW.WW .W.W.W...WWWW...WW.CC.C.._W.WC.WW_WW._W....W.WWW.W.WWW.W..W WW.....WW.W_WWWWW..WCRW..WWCW.WWW__.WWWWCW_W._._WW_W...W...W _W..W..WW.W...._W..._WW.W.WWW.._W.WWW.WWW....WW_.C...W._ Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process What cause this high cpu load while the apache cpu load is fine? the mysql process is also fine.. the cpu load is still high even if I stop mail-http-mysql services!

    Read the article

  • Lag spikes at full CPU usage, lagy mouse, maybe video card

    - by Roberts
    My PC specs: Motherboard Name - Gigabyte GA-945PL-S3 CPU Type - DualCore Intel Core 2 Duo E4300, 1800 MHz (9 x 200) OS - Microsoft Windows 7 Ultimate OS Kernel Type - 32-bit OS Version - 6.1.7601 I bougth a new video card one month ago. GeForce 210. I didn't have any problems. I wanted to overclock it, in other words: "Play with it". So I installed Gigabyte EasyBoost from CD and overclocked the GPU 590 + 110 mhz, memory to max to 960mhz from 800mhz. Benchmarks showed a little bit bigger score. Then I overclocked shader clock from 1405 to [..] (don't remeber really). So I was playing Modern Warfare 2 when off sudden computer froze when I wanted to select team, I was afk before that. I had to reset CMOS. After that I had problems with Skype: unread messages and no sound. Then I figured it out that when ever I open EasyBoost - Skype starts to glitch again. Now I use EVGA Precission X. Now after a month, I cleaned computer and closed the case, it was open all the time. I started to overclock GPU clock only (just a bit) because there was no problems that would stop me. So sometimes on heavy CPU load graphics starts to lag. Dragging a window is painful to watch too. Sometimes the screen freezes for 5 to 10 seconds (I can see that hard disk activity is maximal). You may say that CPU fault it is, isn't it? But sometimes lag spikes starts randomly when CPU load is at maximum. All 3 benchmark softwares (PerformanceTest, NovaBench and MSI Kombustor) shows that performance of my video card has dropped about 25%. BUT! CPU score is lower too. I ignored these problems but when I refreshed Windows Experience Index I was shocked. Month before (in latvian language but not so hard to understand): Now 01.04.2012 (upgraded RAM): This happened when I tried to capture Minecraft with Fraps on underclocked GPU to 580mhz (def: 590mhz): All drivers are up to date. Average CPU temperature from 55°C to 75°C (at 70°C sometimes starts these lag spikes). Video card's tempratures are from 45°C to 60°C (very hard to reach 60°C). So my hope is that the video card is fine, cause this card is very new and I want to upgrade CPU anyways. Aplogies for my mistakes in vocabulary (I am trying to type this as fast I can). Update 02.04.2012 - 7:21 Forgot one thing, my hard disk is extrimly slow and I will upgrade it this week or next week so I will be installing same OS again. I am multi-tasker but I can't do much because of 1.8 GHz CPU and slow hard drive (Model ID - WDC WD800JD-60JRC0). The Windows Experience Index is back to normal. Actually "Spelu grafika" (Gaming graphics) are higher than month ago. During this test mouse was very lagy, but month ago there weren't any problems. WHY!?

    Read the article

  • CPU Cores: The more the better?

    - by T Pops
    I currently have a dual-core processor at work and a quad-core at home. I've noticed both PCs are pretty equal as far as launching applications/surfing the web. The difference I can see is that my dual-core is 2.8GHz and my quad-core is 2.4GHz. Is it better to have a dual-core with a fast clock speed or a quad-core with a mediocre clock speed?

    Read the article

  • Can Acrobat 11 be made to do OCR using multiple CPU cores?

    - by tarcman.
    OCR processing takes time. Using multiple CPU cores would speed up processing. Acrobat 10 was not a multithreaded application. How about Acrobat 11? Does 11 by default do OCR using multiple CPU cores (if available)? If not, are there any workarounds, e.g. scripting, to help make Acrobat 11 do OCR using multiple CPU cores? Either through Acrobat's built in scripting language or using external scripts that launch and direct multiple single thread instances of Acrobat to in parallell to parts of the processing job. Note: This question is not too localized (not limited to a specific moment in time) because (1) Adobe does not release new major Acrobat versions very often (Acrobat 10 was released two years ago) and (2) Adobe Acrobat is a widely used application.

    Read the article

  • core temperature vs CPU temperature

    - by Karl Nicoll
    I have recently installed a new heat sink & fan combination on my Core 2 Quad since my CPU was hitting about 70C under load. This has managed reduce temperatures while running Prime95 to about 54C, which I'm taking as a win (this is ~30 minutes after fitting). I'm a little confused though. The temperature readings given above are for CORE temperatures, but HWMonitor is showing a 5th "CPU" temperature (4 temperatures being the individual core temps) which is showing 21C idle, when idle temperatures for the cores vary between 37C and 42C. I guess there are two questions here: Are my CPU/Core temperatures decent, and is it safe to overclock when these are stock clock temperatures? I gather that the maximum safe operating temperature for a C2Q is ~70C, so which temperature should I measure against, the core temperatures (which are higher), or the CPU temperature reading?

    Read the article

  • Coreinfo reports i7-3770 CPU doesn't support EPT (aka SLAT) and VMX

    - by Toro
    Here is the output: Coreinfo v3.05 - Dump information on system CPU and memory topology Copyright (C) 2008-2012 Mark Russinovich Sysinternals - www.sysinternals.com Note: Coreinfo must be executed on a system without a hypervisor running for accurate results. Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz Intel64 Family 6 Model 58 Stepping 9, GenuineIntel HYPERVISOR * Hypervisor is present VMX - Supports Intel hardware-assisted virtualization EPT - Supports Intel extended page tables (SLAT) According to Intel the CPU does have a VMX and EPT support.

    Read the article

  • How is load average related to CPU utilization?

    - by Kaustubh P
    I am facing a load average of 3 since past 2 days. The CPU utilization is never above 40 % in all cases. Here are some screenshots of Server Density monitoring tool that I use. The process snapshot at the highest peak, @ 0:00 is as follows: And the process snapshot at the peak created at 12:00 is: My question is, even though CPU utilization is not 100 %, why am I facing a high average? PS: All snapshots are sorted by descending CPU utilization.

    Read the article

  • spoolsv.exe consumes all CPU and RAM resources

    - by pcampbell
    Consider a Windows 7 x64 installation with 2 printers installed. The system has 8GB installed RAM. One printer is a Brother laser MFC-8220 Printer via TCP/IP, and the other is a CutePDF printer. Problem: the spoolsv.exe regularly eats obscene amount of memory and CPU when the machine is idle. Usually the device is powered off. Turning it on has no effect on the RAM or CPU usage. The first consideration was that perhaps a print job has previously been sent to the Brother, but the queues are empty, and no jobs are waiting. These screenshots do not show, but regularly the spoolsv service will consume all 8GB and climb to use 95-100% of the CPU. The two printers - a Brother and the CutePDF printer both have 0 documents in their respective queues. Question: what measures can I take to ensure the spoolsv.exe doesn't consume inappropriate amounts of CPU and RAM?

    Read the article

  • Clean thermal paste from inside CPU

    - by Karolinger
    I bought an used CPU (Intel "Core 2" E4700) on eBay. And it came dirty inside with something that seems it´s thermal paste. Before I send it back, I wonder if it could it still work without cleaning this dirt. The seller supposedly "tested" it to be fully working. Final, is there a way to clean this dirt without damaging the CPU? Or, is it too risky (or too much work) to do so? This is the CPU:

    Read the article

  • checking the status of CPU throttling: whether ON or OFF

    - by Gaurish Telang
    I am trying to install the ATLAS BLAS library which recommends that I turn if CPU throttling to do the install. How do I check if my CPU throttling is ON or OFF? I tried the suggestion of Code: ./cpufreq-selector -g performance in the /usr/bin directory as suggested elsewhere in the forum but there was no output and the control returned back to the user. I have searched everywhere but there does not seem to be a way to determine the status of the CPU throttling

    Read the article

  • Thinkpad CPU temperature reaches 100°C after 10 minutes of heavy use

    - by Nicolas Raoul
    Less than two years ago, I bought a Lenovo Thinkpad R500. When using the CPU heavily, it sometimes decides to reboot. I am using Linux, and a widget shows me the CPU temperature. The PC usually reboots when the temperature of the first core gets over 100°C Since I switched from Ubuntu 2010.10 32bit to Ubuntu 2011.04 64bit, it crashes much more often. I survive using these techniques: When in the office, I use a laptopcooler. When outside, I underclock to 800 MHz, by doing so it does not get too warm. QUESTION: Is it normal that a Thinkpad crashes if the CPU is at 100% for more than 10 minutes? How can I use the full power of my computer, for instance when showing CPU-hungry business intelligence tools to clients? The computer does not really feel that hot. Maybe the sensor itself is reporting wrong temperatures? Can I tell the BIOS to ignore it?

    Read the article

  • Clean thermal paste from touch contact points on the underside of the CPU

    - by Karolinger
    I bought an used CPU (Intel "Core 2" E4700) on eBay and it came with the underside dirty with something that seems it´s thermal paste. Before I send it back, I wonder if it could it still work without cleaning this dirt because the seller supposedly "tested" it to be fully working. Final, is there a way to clean this dirt without damaging the CPU? Or, is it too risky (or too much work) to do so? This is the CPU:

    Read the article

  • High Load - Low IO - Low CPU usage

    - by devup
    I have a system whose load is rather high. As you can see from the top output below, CPU usage and I/O is negligible: top - 17:31:59 up 4 days, 2:34, 2 users, load average: 1.00, 0.99, 1.00 Tasks: 71 total, 1 running, 70 sleeping, 0 stopped, 0 zombie Cpu(s): 2.0%us, 2.0%sy, 0.0%ni, 95.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 960720k total, 707288k used, 253432k free, 67328k buffers Swap: 2811896k total, 2644k used, 2809252k free, 528928k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15310 root 20 0 2512 1128 888 R 2.1 0.1 0:00.05 top I would appreciate any assistance with isolating the cause(s) of high load for when I/O and CPU are not factors.

    Read the article

  • Configuring ZenOSS to monitor CPU load

    - by Tom
    I'm trying test out monitoring tools for a network at work with a coworker but neither of us have ever used an sort of monitoring tools before. Currently we are experimenting with ZenOSS and having some difficulties. We want to populate our CPU load graphs because that is one of the primary feature we are looking for in our monitoring tools but we have been unable to populate the graphs with data. So far we have installed the wmipreformance, sqldatasource, wmidatasource, snmpperformance(simple) zenpacks and the machine we are trying to monitor is running Windows XP. We have tried to model the device and everything seems to run and we've tride to add data points to graphs but the only options we recieve for graphs are CPU and Memory. We are able to monitor services, ZenOSS recognizes the make and model of the processor, RAM, and Harddrive and is even giving us metrics on available storage but again, we are looking for performance metrics such as CPU load and Memory utilization. I realize I probably didn't provide a lot of information but that is because we don't have a very good idea of what we are doing and can't find instruction either on the ZenOSS homepage or forums to monitor CPU load. If someone could give us step by step instruction on how to set up CPU load monitoring that would probably be more beneficial to us than a diagnostic of our current setup, but regardless, if I left any important information out and you need it to answer the question, please let me know. Thank you.

    Read the article

  • Intel site says VT-x is supported on my CPU, but tests say otherwise

    - by Anshul
    I have a laptop with an Intel 2nd Gen. i7-2729QM (http://ark.intel.com/products/50067/) and the Intel site says that it supports VT-x, but I've downloaded the Intel Processor Identification Utility (http://www.intel.com/support/processors/tools/piu/sb/CS-014921.htm) and the test says that my CPU does not have VT-x. There is no option in my BIOS that allows me to enable/disable VT-x. I researched my laptop model (SAGER NP8170) and most forums say that it's enabled by default and there's no option in the BIOS. So assuming that's true, what gives? I also downloaded another tool called SecurAble from GRC and it also says that my CPU doesn't support VT-x. VirtualBox also says that my CPU does not support virtualization. My mind is boggled by why it says on the Intel site that my CPU supports VT-x but all other tests show otherwise. Anyone know what's going on? Thanks in advance.

    Read the article

  • High CPU usage - symptoms moving from server to server after bouncing

    - by grt3kl
    First off, I apologize if I didn't include enough information to properly troubleshoot this issue. This sort of thing isn't my specialty, so it is a learning process. If there's something I need to provide, please let me know and I'll be happy to do what I can. The images associated with my question are at the bottom of this post. We are dealing with a clustered environment of four WebLogic 9.2 Java application servers. The cluster utilizes a round-robin load algorithm. Other details include: Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04) BEA JRockit(R) (build R27.4.0-90_CR352234-91983-1.5.0_12-20071115-1605-linux-x86_64, compiled mode) Basically, I started looking at the servers' performance because our customers are seeing lots of lag at various times of the day. Our servers should easily handle the loads they are given, so it's not clear what's going on. Using HP Performance Manager, I generated some graphs that indicate that the CPU usage is completely out of whack. It seems that, at any given point, one or more of the servers has a CPU utilization of over 50%. I know this isn't particularly high, but I would say it is a red flag based on the CPU utilization of the other servers in the WebLogic cluster. Interesting things to note: The high CPU utilization was occurring only on server02 for several weeks. The server crashed (extremely rare; we are not sure if it's related to this) and upon starting it back up, the CPU utilization was normal on all 4 servers. We restarted all 4 managed servers and the application server (on server01) yesterday, on 2/28. As you can see, server03 and server04 picked up the behavior that was seen on server02 before. The CPU utilization is a Java process owned by the application user (appown). The number of transactions is consistent across all servers. It doesn't seem like any one server is actually handling more than another. If anyone has any ideas or can at least point me in the right direction, that would be great. Again, please let me know if there is any additional information I should post. Thanks!

    Read the article

  • Hyper-V CPU Utilization, Good Tools?

    - by yzorg
    I just learned a ton from this post: Host CPU% doesn't include child VM CPU%, specifically I learned that both the 'host OS' and 'child VM' are siblings within the HyperVisor layer. Are there good utilities for 'watching' the total CPU and other resource counters at the HyperVisor (hardware) layer? I know perfmon (watching special Hyper-V CPU counters) is the standard answer, but I've stayed away from perfmon for ad-hoc monitoring. Is there a good OSS or free tools to 'watch' the resource utilization as I create multiple new VMs running on the server? I'm a developer, so if there aren't any good UI tools to surface this data I'd consider creating one, but only if needed. P.S. My specific scenario is I'm creating new web, SQL and back-end server VMs for new Windows 8 Server and SQL 2012 (entire application stack). I need to monitor them for utilization and know when I need to grow beyond 1 host (I'll need to split the VMs into separate hosts as I hit hardware limits of the 1st host, and diagnose problems).

    Read the article

  • CPU operating temperature ranges

    - by osij2is
    I have an AMD Phenom II 960T with 2 cores unlocked for a total of 6 cores. I don't overclock at all. I have a Arctic Cooling ACALP64 Heatsink/Fan installed. I'm currently running ESXi 5.0 so I have to go into the BIOS to read the CPU temperatures, which at idle seem to be in the 71-74C range. To me, this is pretty high, but I cannot find any official temperature ranges that AMD says the CPU can work well within. There seems to be a lot of questions on superuser and numerous forums around CPU temperatures but no one seems to have a clear consensus as to what the manufacturer temperature ranges are for specific CPUs. I've tried searching through AMDs site to no avail. At this point, I'd be willing to shut off the 2 extra cores if it keeps the heat down but until I get some sort of tolerance or range for temperature, I have no idea if the CPU is being damaged or not. Can anyone point to a direct source, article, FAQ from AMD that specifically states their CPUs temperature range? Or are CPU temperature ranges so varying that there's no possible baseline? Am I being too paranoid about this? To me, anything over 65C is a bit much and if I'm in the low-mid 70s range with NO VMs running, what can I expect if I have several VMs running?

    Read the article

  • apache high system CPU time

    - by jperelli
    I have a web server: ubuntu apache+php app+postgresql and a stats server: ubuntu apache+php - piwik and munin2 installed. The communication for munin2 is made through ssh. In munin i see a lot of system cpu activity, that I assume it it because of apache (i see 5 or 6 apache instances using ~5% CPU on top) I was not having this system CPU activity before. Does anyone knows how can I see where that comes from? EDIT: some munin graphs

    Read the article

  • Error 5A - Internal CPU Error

    - by Mitch
    So I built myself a pc for the first time. The machine has been running properly, and without issue, since March of this year. Today after an hour or so of gaming the machine shutdown without warning. Any attempts to reboot have been unsuccessful. I have managed to get it to post, twice, but it doesn't get as far as the OS before it shuts off again. I pulled the second video card so I could see the error code LED and it appears to be showing 5A which matches to "Internal CPU Error". Am I looking at a failed CPU or is this a symptom of another issue? Any feedback you can provide is most appreciated. Here's my parts list: CPU: Intel Core i7-4930K 3.4GHz 6-Core CPU Cooler: Corsair H105 73.0 CFM Liquid Motherboard: Asus X79 Deluxe ATX LGA2011 Ram: G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Video card (x2): EVGA GeForce GTX 770 2GB Power supply: Corsair 1000W ATX12V / EPS12V

    Read the article

  • What does CPU Time consist of?

    - by Sid
    What does CPU time exactly consist of? For instance, is the time taken to access a page from the RAM (at which point, the CPU is most likely idling) part of the CPU time? I'm not talking about fetching the page from the disk here, just fetching it from the RAM. Thanks

    Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >