Search Results

Search found 5628 results on 226 pages for 'cpu hogging'.

Page 6/226 | < Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >

• PHP processes run one at a time, always taking 100% of one core

  - by Derek Kurth

  We have seven websites written in PHP running on a Windows 2008 server with IIS 7.5. They are all very slow right now. When I look in Task Manager, I see around 10 php-cgi.exe processes, and they are all taking 0% of the CPU, except one, which is taking 25%. It's a quad-core server, so it's taking 100% of one core. If I watch for a few seconds, the process taking 25% will go to 0%, and a different php-cgi.exe process will jump to 25%. So all the php-cgi.exe processes are just lined up, waiting on a single core, and each process uses 100% of the processor when it can. Each of the 7 sites is in its own application pool in IIS, and we're using FastCGI. The PHP version is 5.3. Any ideas? Thanks!

  Read the article

• 100% CPU when doing 4 or more concurrent requests with Magento

  - by pancake

  Currently I'm having trouble with a server running Magento, it's unbelievably slow. It's a VPS with a few Magento installations on it used for development, so I'm the only one using them. When I do 4 request all 2 seconds after each other I'm finished in 10 seconds. Slow, but still within the limits of my patience. When I do 4 "concurrent" requests, however (opening 4 tabs in a row, very quickly) all four cores go to 100% and stay there for like a minute. How is this possible? I know that there are a lot of possibilities here, so any tips on how to make an Apache/PHP server go faster are also welcome. It used to go a lot faster before, and I've also tried APC, but it kept causing problems (PHP errors, something with memory pools) so I've disabled it. By the way, the Magento cache is off and compiling is also off. I know this makes Magento slower than usual, but I don't think a 60 second response time is normal for any Magento installation. Virtual hardware: 4 Cores and 4096MB RAM Swap is never used (checked with htop) 100GB disk space, of which 10% is in use Software: Debian 6 DirectAdmin and apache custombuild PHP 5.2.17 (CLI) If you need more info, please tell me how to get it, because I probably don't know how. I do know how to use the command line in linux and the usage of quite a few commands, but my experience with managing a server is limited.

  Read the article

• core temperature vs CPU temperature

  - by Karl Nicoll

  I have recently installed a new heat sink & fan combination on my Core 2 Quad since my CPU was hitting about 70C under load. This has managed reduce temperatures while running Prime95 to about 54C, which I'm taking as a win (this is ~30 minutes after fitting). I'm a little confused though. The temperature readings given above are for CORE temperatures, but HWMonitor is showing a 5th "CPU" temperature (4 temperatures being the individual core temps) which is showing 21C idle, when idle temperatures for the cores vary between 37C and 42C. I guess there are two questions here: Are my CPU/Core temperatures decent, and is it safe to overclock when these are stock clock temperatures? I gather that the maximum safe operating temperature for a C2Q is ~70C, so which temperature should I measure against, the core temperatures (which are higher), or the CPU temperature reading?

  Read the article

• Coreinfo reports i7-3770 CPU doesn't support EPT (aka SLAT) and VMX

  - by Toro

  Here is the output: Coreinfo v3.05 - Dump information on system CPU and memory topology Copyright (C) 2008-2012 Mark Russinovich Sysinternals - www.sysinternals.com Note: Coreinfo must be executed on a system without a hypervisor running for accurate results. Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz Intel64 Family 6 Model 58 Stepping 9, GenuineIntel HYPERVISOR * Hypervisor is present VMX - Supports Intel hardware-assisted virtualization EPT - Supports Intel extended page tables (SLAT) According to Intel the CPU does have a VMX and EPT support.

  Read the article

• how can i increase cpu utilization on a aix unix p5 server

  - by user36101

  i need to make cpu utilization increase to about 90%

  Read the article

• spoolsv.exe consumes all CPU and RAM resources

  - by pcampbell

  Consider a Windows 7 x64 installation with 2 printers installed. The system has 8GB installed RAM. One printer is a Brother laser MFC-8220 Printer via TCP/IP, and the other is a CutePDF printer. Problem: the spoolsv.exe regularly eats obscene amount of memory and CPU when the machine is idle. Usually the device is powered off. Turning it on has no effect on the RAM or CPU usage. The first consideration was that perhaps a print job has previously been sent to the Brother, but the queues are empty, and no jobs are waiting. These screenshots do not show, but regularly the spoolsv service will consume all 8GB and climb to use 95-100% of the CPU. The two printers - a Brother and the CutePDF printer both have 0 documents in their respective queues. Question: what measures can I take to ensure the spoolsv.exe doesn't consume inappropriate amounts of CPU and RAM?

  Read the article

• How is load average related to CPU utilization?

  - by Kaustubh P

  I am facing a load average of 3 since past 2 days. The CPU utilization is never above 40 % in all cases. Here are some screenshots of Server Density monitoring tool that I use. The process snapshot at the highest peak, @ 0:00 is as follows: And the process snapshot at the peak created at 12:00 is: My question is, even though CPU utilization is not 100 %, why am I facing a high average? PS: All snapshots are sorted by descending CPU utilization.

  Read the article

• Clean thermal paste from inside CPU

  - by Karolinger

  I bought an used CPU (Intel "Core 2" E4700) on eBay. And it came dirty inside with something that seems it´s thermal paste. Before I send it back, I wonder if it could it still work without cleaning this dirt. The seller supposedly "tested" it to be fully working. Final, is there a way to clean this dirt without damaging the CPU? Or, is it too risky (or too much work) to do so? This is the CPU:

  Read the article

• checking the status of CPU throttling: whether ON or OFF

  - by Gaurish Telang

  I am trying to install the ATLAS BLAS library which recommends that I turn if CPU throttling to do the install. How do I check if my CPU throttling is ON or OFF? I tried the suggestion of Code: ./cpufreq-selector -g performance in the /usr/bin directory as suggested elsewhere in the forum but there was no output and the control returned back to the user. I have searched everywhere but there does not seem to be a way to determine the status of the CPU throttling

  Read the article

• Thinkpad CPU temperature reaches 100°C after 10 minutes of heavy use

  - by Nicolas Raoul

  Less than two years ago, I bought a Lenovo Thinkpad R500. When using the CPU heavily, it sometimes decides to reboot. I am using Linux, and a widget shows me the CPU temperature. The PC usually reboots when the temperature of the first core gets over 100°C Since I switched from Ubuntu 2010.10 32bit to Ubuntu 2011.04 64bit, it crashes much more often. I survive using these techniques: When in the office, I use a laptopcooler. When outside, I underclock to 800 MHz, by doing so it does not get too warm. QUESTION: Is it normal that a Thinkpad crashes if the CPU is at 100% for more than 10 minutes? How can I use the full power of my computer, for instance when showing CPU-hungry business intelligence tools to clients? The computer does not really feel that hot. Maybe the sensor itself is reporting wrong temperatures? Can I tell the BIOS to ignore it?

  Read the article

• Very uneven CPU utilization with SQL Server 2012 on 2 processor computer with 16 cores / processor

  - by cooplarsh

  After installing SQL Server Enterprise 2012 with the Server + Cal license model, on a computer with 2 processors each with 16 cores (and no hyperthreading involved) and putting the server under extremely heavy load the 16 cores on the first processor were very underutilized, the first 4 cores on the 2nd CPU were heavily utilized, and the last 12 cores were not used at all (because of the 20 core limit for this sql server version). Total CPU utilization was displaying as around 25%. Unfortunately, the server suffered from extremely poor performance even though if the tasks were evenly distributed across the 20 cores it wouldn't have been anywhere near as bad. The Windows Server was running on a VMWare virtual image under ESX Server, but all of the CPU was allocated to the windows server. We tried changing affinity settings (e.g., allocating most cores to CPU and the others to I/O), but that didn't help solve the performance problems. Upgrading the product edition to SQL Server Enterprise Core 2012 not only allowed the SQL Server to utilize the 12 previously unused cores on the 2nd processor, but it also resulted in a much more even distribution of tasks across all of the processors. To get through the backlog of requests cpU utilization jumped to around 90%, and then came down to around 33% once it was caught up, but performance improved dramatically since we failed over to the newly updated version And the performance issues went away. I was wondering if anyone knows what might cause SQL Server to unevenly distribute the load, relying almost exclusively on the first 4 cores of the 2nd processor that had 12 cores idle, and allocate only a few tasks to each of the 16 cores on the first processor. Also, is there any way we could have more evenly distributed the load across the 20 cores that were being used without the product edition upgrade? The flip side of that question is what did the product upgrade do that caused SQL Server to start evenly distributing the load across all of the cores that it recognized? Thanks to any insight to answer these questions and/or links that might help me better understand how to make sense of what was happenings.

  Read the article

• Clean thermal paste from touch contact points on the underside of the CPU

  - by Karolinger

  I bought an used CPU (Intel "Core 2" E4700) on eBay and it came with the underside dirty with something that seems it´s thermal paste. Before I send it back, I wonder if it could it still work without cleaning this dirt because the seller supposedly "tested" it to be fully working. Final, is there a way to clean this dirt without damaging the CPU? Or, is it too risky (or too much work) to do so? This is the CPU:

  Read the article

• High Load - Low IO - Low CPU usage

  - by devup

  I have a system whose load is rather high. As you can see from the top output below, CPU usage and I/O is negligible: top - 17:31:59 up 4 days, 2:34, 2 users, load average: 1.00, 0.99, 1.00 Tasks: 71 total, 1 running, 70 sleeping, 0 stopped, 0 zombie Cpu(s): 2.0%us, 2.0%sy, 0.0%ni, 95.9%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 960720k total, 707288k used, 253432k free, 67328k buffers Swap: 2811896k total, 2644k used, 2809252k free, 528928k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15310 root 20 0 2512 1128 888 R 2.1 0.1 0:00.05 top I would appreciate any assistance with isolating the cause(s) of high load for when I/O and CPU are not factors.

  Read the article

• Configuring ZenOSS to monitor CPU load

  - by Tom

  I'm trying test out monitoring tools for a network at work with a coworker but neither of us have ever used an sort of monitoring tools before. Currently we are experimenting with ZenOSS and having some difficulties. We want to populate our CPU load graphs because that is one of the primary feature we are looking for in our monitoring tools but we have been unable to populate the graphs with data. So far we have installed the wmipreformance, sqldatasource, wmidatasource, snmpperformance(simple) zenpacks and the machine we are trying to monitor is running Windows XP. We have tried to model the device and everything seems to run and we've tride to add data points to graphs but the only options we recieve for graphs are CPU and Memory. We are able to monitor services, ZenOSS recognizes the make and model of the processor, RAM, and Harddrive and is even giving us metrics on available storage but again, we are looking for performance metrics such as CPU load and Memory utilization. I realize I probably didn't provide a lot of information but that is because we don't have a very good idea of what we are doing and can't find instruction either on the ZenOSS homepage or forums to monitor CPU load. If someone could give us step by step instruction on how to set up CPU load monitoring that would probably be more beneficial to us than a diagnostic of our current setup, but regardless, if I left any important information out and you need it to answer the question, please let me know. Thank you.

  Read the article

• Intel site says VT-x is supported on my CPU, but tests say otherwise

  - by Anshul

  I have a laptop with an Intel 2nd Gen. i7-2729QM (http://ark.intel.com/products/50067/) and the Intel site says that it supports VT-x, but I've downloaded the Intel Processor Identification Utility (http://www.intel.com/support/processors/tools/piu/sb/CS-014921.htm) and the test says that my CPU does not have VT-x. There is no option in my BIOS that allows me to enable/disable VT-x. I researched my laptop model (SAGER NP8170) and most forums say that it's enabled by default and there's no option in the BIOS. So assuming that's true, what gives? I also downloaded another tool called SecurAble from GRC and it also says that my CPU doesn't support VT-x. VirtualBox also says that my CPU does not support virtualization. My mind is boggled by why it says on the Intel site that my CPU supports VT-x but all other tests show otherwise. Anyone know what's going on? Thanks in advance.

  Read the article

• High CPU usage - symptoms moving from server to server after bouncing

  - by grt3kl

  First off, I apologize if I didn't include enough information to properly troubleshoot this issue. This sort of thing isn't my specialty, so it is a learning process. If there's something I need to provide, please let me know and I'll be happy to do what I can. The images associated with my question are at the bottom of this post. We are dealing with a clustered environment of four WebLogic 9.2 Java application servers. The cluster utilizes a round-robin load algorithm. Other details include: Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_12-b04) BEA JRockit(R) (build R27.4.0-90_CR352234-91983-1.5.0_12-20071115-1605-linux-x86_64, compiled mode) Basically, I started looking at the servers' performance because our customers are seeing lots of lag at various times of the day. Our servers should easily handle the loads they are given, so it's not clear what's going on. Using HP Performance Manager, I generated some graphs that indicate that the CPU usage is completely out of whack. It seems that, at any given point, one or more of the servers has a CPU utilization of over 50%. I know this isn't particularly high, but I would say it is a red flag based on the CPU utilization of the other servers in the WebLogic cluster. Interesting things to note: The high CPU utilization was occurring only on server02 for several weeks. The server crashed (extremely rare; we are not sure if it's related to this) and upon starting it back up, the CPU utilization was normal on all 4 servers. We restarted all 4 managed servers and the application server (on server01) yesterday, on 2/28. As you can see, server03 and server04 picked up the behavior that was seen on server02 before. The CPU utilization is a Java process owned by the application user (appown). The number of transactions is consistent across all servers. It doesn't seem like any one server is actually handling more than another. If anyone has any ideas or can at least point me in the right direction, that would be great. Again, please let me know if there is any additional information I should post. Thanks!

  Read the article

• Hyper-V CPU Utilization, Good Tools?

  - by yzorg

  I just learned a ton from this post: Host CPU% doesn't include child VM CPU%, specifically I learned that both the 'host OS' and 'child VM' are siblings within the HyperVisor layer. Are there good utilities for 'watching' the total CPU and other resource counters at the HyperVisor (hardware) layer? I know perfmon (watching special Hyper-V CPU counters) is the standard answer, but I've stayed away from perfmon for ad-hoc monitoring. Is there a good OSS or free tools to 'watch' the resource utilization as I create multiple new VMs running on the server? I'm a developer, so if there aren't any good UI tools to surface this data I'd consider creating one, but only if needed. P.S. My specific scenario is I'm creating new web, SQL and back-end server VMs for new Windows 8 Server and SQL 2012 (entire application stack). I need to monitor them for utilization and know when I need to grow beyond 1 host (I'll need to split the VMs into separate hosts as I hit hardware limits of the 1st host, and diagnose problems).

  Read the article

• CPU operating temperature ranges

  - by osij2is

  I have an AMD Phenom II 960T with 2 cores unlocked for a total of 6 cores. I don't overclock at all. I have a Arctic Cooling ACALP64 Heatsink/Fan installed. I'm currently running ESXi 5.0 so I have to go into the BIOS to read the CPU temperatures, which at idle seem to be in the 71-74C range. To me, this is pretty high, but I cannot find any official temperature ranges that AMD says the CPU can work well within. There seems to be a lot of questions on superuser and numerous forums around CPU temperatures but no one seems to have a clear consensus as to what the manufacturer temperature ranges are for specific CPUs. I've tried searching through AMDs site to no avail. At this point, I'd be willing to shut off the 2 extra cores if it keeps the heat down but until I get some sort of tolerance or range for temperature, I have no idea if the CPU is being damaged or not. Can anyone point to a direct source, article, FAQ from AMD that specifically states their CPUs temperature range? Or are CPU temperature ranges so varying that there's no possible baseline? Am I being too paranoid about this? To me, anything over 65C is a bit much and if I'm in the low-mid 70s range with NO VMs running, what can I expect if I have several VMs running?

  Read the article

• apache high system CPU time

  - by jperelli

  I have a web server: ubuntu apache+php app+postgresql and a stats server: ubuntu apache+php - piwik and munin2 installed. The communication for munin2 is made through ssh. In munin i see a lot of system cpu activity, that I assume it it because of apache (i see 5 or 6 apache instances using ~5% CPU on top) I was not having this system CPU activity before. Does anyone knows how can I see where that comes from? EDIT: some munin graphs

  Read the article

• Error 5A - Internal CPU Error

  - by Mitch

  So I built myself a pc for the first time. The machine has been running properly, and without issue, since March of this year. Today after an hour or so of gaming the machine shutdown without warning. Any attempts to reboot have been unsuccessful. I have managed to get it to post, twice, but it doesn't get as far as the OS before it shuts off again. I pulled the second video card so I could see the error code LED and it appears to be showing 5A which matches to "Internal CPU Error". Am I looking at a failed CPU or is this a symptom of another issue? Any feedback you can provide is most appreciated. Here's my parts list: CPU: Intel Core i7-4930K 3.4GHz 6-Core CPU Cooler: Corsair H105 73.0 CFM Liquid Motherboard: Asus X79 Deluxe ATX LGA2011 Ram: G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Video card (x2): EVGA GeForce GTX 770 2GB Power supply: Corsair 1000W ATX12V / EPS12V

  Read the article

• What does CPU Time consist of?

  - by Sid

  What does CPU time exactly consist of? For instance, is the time taken to access a page from the RAM (at which point, the CPU is most likely idling) part of the CPU time? I'm not talking about fetching the page from the disk here, just fetching it from the RAM. Thanks

  Read the article

• Amazon EC2 - how to determine how busy each CPU is

  - by sally

  I have an Amazon EC2 micro instance. I believe that this is 1 core (or 2 for periodic bursts) with 4 CPU's. I'm getting confused with the terminology (ECU vs CPU vs Core) but really I would like to see how busy each CPU is. When I look at top it seems to be showing me just the cores. I want to see if my process is be spread out across the available processors and how busy each is, what is the appropriate command to do this?

  Read the article

• Can a SQL Server have a CPU bottleneck when Processor Time is under 30%

  - by Sleepless

  Is it in principle possible for the CPU to be the bottleneck on a SQL Server if the Performance Counter Processor:Processor Time is constantly under 30% on all cores? Or does low Processor Time automatically allow me to rule out the CPU as a potential trouble source? I am asking this because SQL Nexus lists CPU as the top bottleneck on a server with low Processor Time values.

  Read the article

• Database Server Hardware components (order of importance), CPU speed VS CPU cache vs RAM vs DISK

  - by nulltorpedo

  I am new to database world and would like to know what are crucial hardware specs when it comes to database performance. I have searched the internet and found this so far (In order of decreasing importance): 1) Hard Disk: Get an SSD basically (much more IOPS than spinners) 2) Memory: Get as much as you can afford 3) CPU: For the same $ spent, prefer larger cache size over speed. Are these findings sensible? EDIT: I would like to focus on CPU speed VS CPU cache size. EDIT2: The database is used to store some combination of ints and int arrays with few text fields. There are a lot of Select queries looking for existing entries. If entry is not found, then insert it. I would say most of processing would be trying to find a match across a table with 200 columns and 20k rows. The insert statements are very few. EDIT3: Also, we have a lot of views (basically select queries).

  Read the article

• How Byte loading/storing is implemented By the CPU?

  - by AlexDan

  I know that in 32bit machine, cpu read from memory 32bits at a time. since the registers in this case is 32bit in size too, I can understand how this works. What I don't understand is how the cpu implement load instructions of 1 byte. does it load the whole word where the single byte is located to the register, then perform some kind of "byte shifting", or does the cpu can load a single byte, in this case when does the byte masking happen, is it until the byte got loaded in the register, or it happen when byte is send through the data bus ? P.S. The cpu Im using is MIPS, the instructions Im talking about are: lb or lbu

  Read the article

< Previous Page | 2 3 4 5 6 7 8 9 10 11 12 13  | Next Page >