sequence generators - Page 60

@"%@ in Objective C?

- by doo

I was following a tut and found a line of code like @"%@ button pressed.". I'm pretty sure the relevant part is the %@, but is the first @ an escape sequence or what? Anyways, searching symbols doesn't go well in any search engine so I thought I'd ask. I think the %@ is like {0} in C#?

Read the article

NHibernate 2 Beginner's Guide Review

- by Ricardo Peres

OK, here's the review I promised a while ago. This is a beginner's introduction to NHibernate, so if you have already some experience with NHibernate, you will notice it lacks a lot of concepts and information. It starts with a good description of NHibernate and why would we use it. It goes on describing basic mapping scenarios having primary keys generated with the HiLo or Identity algorithms, without actually explaining why would we choose one over the other. As for mapping, the book talks about XML mappings and provides a simple example of Fluent NHibernate, comparing it to its XML counterpart. When it comes to relations, it covers one-to-many/many-to-one and many-to-many, not one-to-one relations, but only talks briefly about lazy loading, which is, IMO, an important concept. Only Bags are described, not any of the other collection types. The log4net configuration description gets it's own chapter, which I find excessive. The chapter on configuration merely lists the most common properties for configuring NHibernate, both in XML and in code. Querying only talks about loading by ID (using Get, not Load) and using Criteria API, on which a paging example is presented as well as some common filtering options (property equals/like/between to, no examples on conjunction/disjunction, however). There's a chapter fully dedicated to ASP.NET, which explains how we can use NHibernate in web applications. It basically talks about ASP.NET concepts, though. Following it, another chapter explains how we can build our own ASP.NET providers using NHibernate (Membership, Role). The available entity generators for NHibernate are referred and evaluated on a chapter of their own, the list is fine (CodeSmith, nhib-gen, AjGenesis, Visual NHibernate, MyGeneration, NGen, NHModeler, Microsoft T4 (?) and hbm2net), examples are provided whenever possible, however, I have some problems with some of the evaluations: for example, Visual NHibernate scores 5 out of 5 on Visual Studio integration, which simply does not exist! I suspect the author means to say that it can be launched from inside Visual Studio, but then, what can't? Finally, there's a chapter I really don't understand. It seems like a bag where a lot of things are thrown in, like NHibernate Burrow (which actually isn't explained at all), Blog.Net components, CSS template conversion and web.config settings related to the maximum request length for file uploads and ending with XML configuration, with the help of GhostDoc. Like I said, the book is only good for absolute beginners, it does a fair job in explaining the very basics, but lack a lot of not-so-basic concepts. Among other things, it lacks: Inheritance mapping strategies (table per class hierarchy, table per class, table per concrete class) Load versus Get usage Other usefull ISession methods First level cache (Identity Map pattern) Other collection types other that Bag (Set, List, Map, IdBag, etc Fetch options User Types Filters Named queries LINQ examples HQL examples And that's it! I hope you find this review useful. The link to the book site is https://www.packtpub.com/nhibernate-2-x-beginners-guide/book

Read the article

Microsoft Introduces WebMatrix

- by Rick Strahl

originally published in CoDe Magazine Editorial Microsoft recently released the first CTP of a new development environment called WebMatrix, which along with some of its supporting technologies are squarely aimed at making the Microsoft Web Platform more approachable for first-time developers and hobbyists. But in the process, it also provides some updated technologies that can make life easier for existing .NET developers. Let’s face it: ASP.NET development isn’t exactly trivial unless you already have a fair bit of familiarity with sophisticated development practices. Stick a non-developer in front of Visual Studio .NET or even the Visual Web Developer Express edition and it’s not likely that the person in front of the screen will be very productive or feel inspired. Yet other technologies like PHP and even classic ASP did provide the ability for non-developers and hobbyists to become reasonably proficient in creating basic web content quickly and efficiently. WebMatrix appears to be Microsoft’s attempt to bring back some of that simplicity with a number of technologies and tools. The key is to provide a friendly and fully self-contained development environment that provides all the tools needed to build an application in one place, as well as tools that allow publishing of content and databases easily to the web server. WebMatrix is made up of several components and technologies: IIS Developer Express IIS Developer Express is a new, self-contained development web server that is fully compatible with IIS 7.5 and based on the same codebase that IIS 7.5 uses. This new development server replaces the much less compatible Cassini web server that’s been used in Visual Studio and the Express editions. IIS Express addresses a few shortcomings of the Cassini server such as the inability to serve custom ISAPI extensions (i.e., things like PHP or ASP classic for example), as well as not supporting advanced authentication. IIS Developer Express provides most of the IIS 7.5 feature set providing much better compatibility between development and live deployment scenarios. SQL Server Compact 4.0 Database access is a key component for most web-driven applications, but on the Microsoft stack this has mostly meant you have to use SQL Server or SQL Server Express. SQL Server Compact is not new-it’s been around for a few years, but it’s been severely hobbled in the past by terrible tool support and the inability to support more than a single connection in Microsoft’s attempt to avoid losing SQL Server licensing. The new release of SQL Server Compact 4.0 supports multiple connections and you can run it in ASP.NET web applications simply by installing an assembly into the bin folder of the web application. In effect, you don’t have to install a special system configuration to run SQL Compact as it is a drop-in database engine: Copy the small assembly into your BIN folder (or from the GAC if installed fully), create a connection string against a local file-based database file, and then start firing SQL requests. Additionally WebMatrix includes nice tools to edit the database tables and files, along with tools to easily upsize (and hopefully downsize in the future) to full SQL Server. This is a big win, pending compatibility and performance limits. In my simple testing the data engine performed well enough for small data sets. This is not only useful for web applications, but also for desktop applications for which a fully installed SQL engine like SQL Server would be overkill. Having a local data store in those applications that can potentially be accessed by multiple users is a welcome feature. ASP.NET Razor View Engine What? Yet another native ASP.NET view engine? We already have Web Forms and various different flavors of using that view engine with Web Forms and MVC. Do we really need another? Microsoft thinks so, and Razor is an implementation of a lightweight, script-only view engine. Unlike the Web Forms view engine, Razor works only with inline code, snippets, and markup; therefore, it is more in line with current thinking of what a view engine should represent. There’s no support for a “page model” or any of the other Web Forms features of the full-page framework, but just a lightweight scripting engine that works with plain markup plus embedded expressions and code. The markup syntax for Razor is geared for minimal typing, plus some progressive detection of where a script block/expression starts and ends. This results in a much leaner syntax than the typical ASP.NET Web Forms alligator (<% %>) tags. Razor uses the @ sign plus standard C# (or Visual Basic) block syntax to delineate code snippets and expressions. Here’s a very simple example of what Razor markup looks like along with some comment annotations: <!DOCTYPE html> <html> <head> <title></title> </head> <body> <h1>Razor Test</h1>  @DateTime.Now <hr />  @DateTime.Now.ToString("T")  @{ List<string> names = new List<string>(); names.Add("Rick"); names.Add("Markus"); names.Add("Claudio"); names.Add("Kevin"); }  <ul> @foreach(string name in names){ <li>@name</li> } </ul>  @if(true) {  <text> true </text>; } else {  <text> false </text>; } </body> </html> Like the Web Forms view engine, Razor parses pages into code, and then executes that run-time compiled code. Effectively a “page” becomes a code file with markup becoming literal text written into the Response stream, code snippets becoming raw code, and expressions being written out with Response.Write(). The code generated from Razor doesn’t look much different from similar Web Forms code that only uses script tags; so although the syntax may look different, the operational model is fairly similar to the Web Forms engine minus the overhead of the large Page object model. However, there are differences: -Razor pages are based on a new base class, Microsoft.WebPages.WebPage, which is hosted in the Microsoft.WebPages assembly that houses all the Razor engine parsing and processing logic. Browsing through the assembly (in the generated ASP.NET Temporary Files folder or GAC) will give you a good idea of the functionality that Razor provides. If you look closely, a lot of the feature set matches ASP.NET MVC’s view implementation as well as many of the helper classes found in MVC. It’s not hard to guess the motivation for this sort of view engine: For beginning developers the simple markup syntax is easier to work with, although you obviously still need to have some understanding of the .NET Framework in order to create dynamic content. The syntax is easier to read and grok and much shorter to type than ASP.NET alligator tags (<% %>) and also easier to understand aesthetically what’s happening in the markup code. Razor also is a better fit for Microsoft’s vision of ASP.NET MVC: It’s a new view engine without the baggage of Web Forms attached to it. The engine is more lightweight since it doesn’t carry all the features and object model of Web Forms with it and it can be instantiated directly outside of the HTTP environment, which has been rather tricky to do for the Web Forms view engine. Having a standalone script parser is a huge win for other applications as well – it makes it much easier to create script or meta driven output generators for many types of applications from code/screen generators, to simple form letters to data merging applications with user customizability. For me personally this is very useful side effect and who knows maybe Microsoft will actually standardize they’re scripting engines (die T4 die!) on this engine. Razor also better fits the “view-based” approach where the view is supposed to be mostly a visual representation that doesn’t hold much, if any, code. While you can still use code, the code you do write has to be self-contained. Overall I wouldn’t be surprised if Razor will become the new standard view engine for MVC in the future – and in fact there have been announcements recently that Razor will become the default script engine in ASP.NET MVC 3.0. Razor can also be used in existing Web Forms and MVC applications, although that’s not working currently unless you manually configure the script mappings and add the appropriate assemblies. It’s possible to do it, but it’s probably better to wait until Microsoft releases official support for Razor scripts in Visual Studio. Once that happens, you can simply drop .cshtml and .vbhtml pages into an existing ASP.NET project and they will work side by side with classic ASP.NET pages. WebMatrix Development Environment To tie all of these three technologies together, Microsoft is shipping WebMatrix with an integrated development environment. An integrated gallery manager makes it easy to download and load existing projects, and then extend them with custom functionality. It seems to be a prominent goal to provide community-oriented content that can act as a starting point, be it via a custom templates or a complete standard application. The IDE includes a project manager that works with a single project and provides an integrated IDE/editor for editing the .cshtml and .vbhtml pages. A run button allows you to quickly run pages in the project manager in a variety of browsers. There’s no debugging support for code at this time. Note that Razor pages don’t require explicit compilation, so making a change, saving, and then refreshing your page in the browser is all that’s needed to see changes while testing an application locally. It’s essentially using the auto-compiling Web Project that was introduced with .NET 2.0. All code is compiled during run time into dynamically created assemblies in the ASP.NET temp folder. WebMatrix also has PHP Editing support with syntax highlighting. You can load various PHP-based applications from the WebMatrix Web Gallery directly into the IDE. Most of the Web Gallery applications are ready to install and run without further configuration, with Wizards taking you through installation of tools, dependencies, and configuration of the database as needed. WebMatrix leverages the Web Platform installer to pull the pieces down from websites in a tight integration of tools that worked nicely for the four or five applications I tried this out on. Click a couple of check boxes and fill in a few simple configuration options and you end up with a running application that’s ready to be customized. Nice! You can easily deploy completed applications via WebDeploy (to an IIS server) or FTP directly from within the development environment. The deploy tool also can handle automatically uploading and installing the database and all related assemblies required, making deployment a simple one-click install step. Simplified Database Access The IDE contains a database editor that can edit SQL Compact and SQL Server databases. There is also a Database helper class that facilitates database access by providing easy-to-use, high-level query execution and iteration methods: @{ var db = Database.OpenFile("FirstApp.sdf"); string sql = "select * from customers where Id > @0"; } <ul> @foreach(var row in db.Query(sql,1)){ <li>@row.FirstName @row.LastName</li> } </ul> The query function takes a SQL statement plus any number of positional (@0,@1 etc.) SQL parameters by simple values. The result is returned as a collection of rows which in turn have a row object with dynamic properties for each of the columns giving easy (though untyped) access to each of the fields. Likewise Execute and ExecuteNonQuery allow execution of more complex queries using similar parameter passing schemes. Note these queries use string-based queries rather than LINQ or Entity Framework’s strongly typed LINQ queries. While this may seem like a step back, it’s also in line with the expectations of non .NET script developers who are quite used to writing and using SQL strings in code rather than using OR/M frameworks. The only question is why was something not included from the beginning in .NET and Microsoft made developers build custom implementations of these basic building blocks. The implementation looks a lot like a DataTable-style data access mechanism, but to be fair, this is a common approach in scripting languages. This type of syntax that uses simple, static, data object methods to perform simple data tasks with one line of code are common in scripting languages and are a good match for folks working in PHP/Python, etc. Seems like Microsoft has taken great advantage of .NET 4.0’s dynamic typing to provide this sort of interface for row iteration where each row has properties for each field. FWIW, all the examples demonstrate using local SQL Compact files - I was unable to get a SQL Server connection string to work with the Database class (the connection string wasn’t accepted). However, since the code in the page is still plain old .NET, you can easily use standard ADO.NET code or even LINQ or Entity Framework models that are created outside of WebMatrix in separate assemblies as required. The good the bad the obnoxious - It’s still .NET The beauty (or curse depending on how you look at it :)) of Razor and the compilation model is that, behind it all, it’s still .NET. Although the syntax may look foreign, it’s still all .NET behind the scenes. You can easily access existing tools, helpers, and utilities simply by adding them to the project as references or to the bin folder. Razor automatically recognizes any assembly reference from assemblies in the bin folder. In the default configuration, Microsoft provides a host of helper functions in a Microsoft.WebPages assembly (check it out in the ASP.NET temp folder for your application), which includes a host of HTML Helpers. If you’ve used ASP.NET MVC before, a lot of the helpers should look familiar. Documentation at the moment is sketchy-there’s a very rough API reference you can check out here: http://www.asp.net/webmatrix/tutorials/asp-net-web-pages-api-reference Who needs WebMatrix? Uhm… good Question Clearly Microsoft is trying hard to create an environment with WebMatrix that is easy to use for newbie developers. The goal seems to be simplicity in providing a minimal development environment and an easy-to-use script engine/language that makes it easy to get started with. There’s also some focus on community features that can be used as starting points, such as Web Gallery applications and templates. The community features in particular are very nice and something that would be nice to eventually see in Visual Studio as well. The question is whether this is too little too late. Developers who have been clamoring for a simpler development environment on the .NET stack have mostly left for other simpler platforms like PHP or Python which are catering to the down and dirty developer. Microsoft will be hard pressed to win those folks-and other hardcore PHP developers-back. Regardless of how much you dress up a script engine fronted by the .NET Framework, it’s still the .NET Framework and all the complexity that drives it. While .NET is a fine solution in its breadth and features once you get a basic handle on the core features, the bar of entry to being productive with the .NET Framework is still pretty high. The MVC style helpers Microsoft provides are a good step in the right direction, but I suspect it’s not enough to shield new developers from having to delve much deeper into the Framework to get even basic applications built. Razor and its helpers is trying to make .NET more accessible but the reality is that in order to do useful stuff that goes beyond the handful of simple helpers you still are going to have to write some C# or VB or other .NET code. If the target is a hobby/amateur/non-programmer the learning curve isn’t made any easier by WebMatrix it’s just been shifted a tad bit further along in your development endeavor when you run out of canned components that are supplied either by Microsoft or the community. The database helpers are interesting and actually I’ve heard a lot of discussion from various developers who’ve been resisting .NET for a really long time perking up at the prospect of easier data access in .NET than the ridiculous amount of code it takes to do even simple data access with raw ADO.NET. It seems sad that such a simple concept and implementation should trigger this sort of response (especially since it’s practically trivial to create helpers like these or pick them up from countless libraries available), but there it is. It also shows that there are plenty of developers out there who are more interested in ‘getting stuff done’ easily than necessarily following the latest and greatest practices which are overkill for many development scenarios. Sometimes it seems that all of .NET is focused on the big life changing issues of development, rather than the bread and butter scenarios that many developers are interested in to get their work accomplished. And that in the end may be WebMatrix’s main raison d'être: To bring some focus back at Microsoft that simpler and more high level solutions are actually needed to appeal to the non-high end developers as well as providing the necessary tools for the high end developers who want to follow the latest and greatest trends. The current version of WebMatrix hits many sweet spots, but it also feels like it has a long way to go before it really can be a tool that a beginning developer or an accomplished developer can feel comfortable with. Although there are some really good ideas in the environment (like the gallery for downloading apps and components) which would be a great addition for Visual Studio as well, the rest of the development environment just feels like crippleware with required functionality missing especially debugging and Intellisense, but also general editor support. It’s not clear whether these are because the product is still in an early alpha release or whether it’s simply designed that way to be a really limited development environment. While simple can be good, nobody wants to feel left out when it comes to necessary tool support and WebMatrix just has that left out feeling to it. If anything WebMatrix’s technology pieces (which are really independent of the WebMatrix product) are what are interesting to developers in general. The compact IIS implementation is a nice improvement for development scenarios and SQL Compact 4.0 seems to address a lot of concerns that people have had and have complained about for some time with previous SQL Compact implementations. By far the most interesting and useful technology though seems to be the Razor view engine for its light weight implementation and it’s decoupling from the ASP.NET/HTTP pipeline to provide a standalone scripting/view engine that is pluggable. The first winner of this is going to be ASP.NET MVC which can now have a cleaner view model that isn’t inconsistent due to the baggage of non-implemented WebForms features that don’t work in MVC. But I expect that Razor will end up in many other applications as a scripting and code generation engine eventually. Visual Studio integration for Razor is currently missing, but is promised for a later release. The ASP.NET MVC team has already mentioned that Razor will eventually become the default MVC view engine, which will guarantee continued growth and development of this tool along those lines. And the Razor engine and support tools actually inherit many of the features that MVC pioneered, so there’s some synergy flowing both ways between Razor and MVC. As an existing ASP.NET developer who’s already familiar with Visual Studio and ASP.NET development, the WebMatrix IDE doesn’t give you anything that you want. The tools provided are minimal and provide nothing that you can’t get in Visual Studio today, except the minimal Razor syntax highlighting, so there’s little need to take a step back. With Visual Studio integration coming later there’s little reason to look at WebMatrix for tooling. It’s good to see that Microsoft is giving some thought about the ease of use of .NET as a platform For so many years, we’ve been piling on more and more new features without trying to take a step back and see how complicated the development/configuration/deployment process has become. Sometimes it’s good to take a step - or several steps - back and take another look and realize just how far we’ve come. WebMatrix is one of those reminders and one that likely will result in some positive changes on the platform as a whole. © Rick Strahl, West Wind Technologies, 2005-2010Posted in ASP.NET IIS7

Read the article

ArchBeat Link-o-Rama Top 10 for November 1, 2012

- by Bob Rhubart

Hurricane Sandy Edition Power outages in the Cleveland area made it impossible to publish posts on Tuesday and Wednesday. In my neighborhood most are still without power. The sound of howling winds that dominated on Monday and Tuesday has been replaced by the sound of of portable generators. My internet connection was restored only after AT&T U-Verse crewmen hooked up a portable generator to power the relay station up the street. Bear in mind that Cleveland is 500 miles from the Atlantic coast. Mobile Development Platform Strategy Chart: ADF Mobile, WebCenter Sites, Portal, Content and Social "Unlike desktop web focused efforts, the world of mobile has undergone change at a feverish pace," says social enterprise expert John Brunswick. His extensive post charts various resources that will help you keep up. ADF Essentials - The Bare Necessities | Floyd Teter The experiment is over... And now Oracle ACE Director Floyd Teter shares his impressions after spending some time with Oracle ADF Essentials, the free version of Oracle ADF. Expanding the Oracle Enterprise Repository with functional documentation Capgemini middleware specialist Marc Kuijpers shares information on how Oracle Enterprise Repository can be configured "to contain functional assets, i.e. functional designs, use cases and a logical data model" to aid in SOA governance efforts. A review of Oracle SOA Suite 11g Administrator’s Handbook | RedStack "More so than any other single piece of content that I have seen on the topic, it provides the information that a SOA administrator needs to know in order to successfully configure, manage, monitor, troubleshoot and backup an Oracle SOA environment." So says Oracle Fusion Middleware A-Team solution architect Mark Nelson of Oracle SOA Suite 11g Administrator’s Handbook, by Ahmed Aboulnaga and Arun Pareek. Eating our own dog food – Oracle’s internal deployment of Oracle IDM Oracle Fusion Middleware A-Team member Brian Eidelman recommends the recent podcast on Oracle’s internal deployment of Oracle OAM and OID. "This was a big project that involved migrating a bunch of critical, high volume applications to leverage OAM and OID," says Eidelman. "So I suggest you tune in to see and hear more about how we deploy our own software." Thought for the Day "Anyone who says they're not afraid at the time of a hurricane is either a fool or a liar, or a little bit of both." — Anderson Cooper Source: BrainyQuote

Read the article

Design pattern to handle queries using multiple models

- by coderkane

I am presented with a dilemma while trying to re-designing the class structure for my PHP/MySQL application to make it more elegant and conform it to the SOLID principle. The problem goes like this: Let as assume, there is an abstract class called person which has certain properties to define a generic person, such as name, age, date of birth etc. There are two classes, student, and teacher, that implements this abstract class. They add their own unique properties to it. I have designed all the three classes to include all the operational logic (details of which are not relevant in context of the question). Now, I need to create views/reports/data grids which contain details from multiple classes, for example, say, a list of all students doing projects in Chemistry mentored by a teacher whose name is the parameter to the query. This is just one example of a view, there are many different views in the application, which uses data from 3-4 tables, and each of them have multiple input parameters to generate them. Considering this particular example, I have written the relevant query using JOIN and the results are as expected and proper, now here is the dilemma: Keeping in mind the single responsibility principle, where should I keep this query? It does not belong to either Student class, or Teacher class or any other classes currently present. a) Should I create a new class, say dataView class, and design it as a MVC pattern and keep the query there? What about the other views? how do they fit in this architecture? b) Should I not keep the query in code at all, and make it DB View ? c) Am I completely wrong in the approach? If so what is the right approach? My considerations are as follows: a) should be easy to add new views later on if requirement comes, without having to copy-paste-modify code b) would like to make it as loosely coupled as possible so that if minor db structure changes happen, it does not break I did google searches on report design and OOP report generators, but all the result seem to focus on the visual design of the report rather than fetching the data. I have already taken care of the visual aspect of the report using MVC with html templates. I am sure this is a very fundamental problem with known solution, but I am somehow not able to find it (maybe searching with wrong keyword). Edit1: Modified the title to make it more relevant Edit2: The accepted answer got me thinking in the right direction and identify my design flaws, which eventually led me to find this question and the solution in Stack Overflow which gave me the detailed answer to clear the confusion.

Read the article

Linux fsck.ext3 says "Device or resource busy" although I did not mount the disk.

- by matnagel

I am running an ubuntu 8.04 server instance with a 8GB virtual disk on vmware 1.0.9. For disk maintenance I made a copy of the virtual disk (by making a copy of the 2 vmdk files of sda on the stopped vm on the host) and added it to the original vm. Now this vm has it's original virtual disk sda plus a 1:1 copy (sdd). There are 2 additional disk sdb and sdc which I ignore.) I would expect sdb not to be mounted when I start the vm. So I try tp do a ext2 fsck on sdd from the running vm, but it reports fsck reported that sdb was mounted. $ sudo fsck.ext3 -b 8193 /dev/sdd e2fsck 1.40.8 (13-Mar-2008) fsck.ext3: Device or resource busy while trying to open /dev/sdd Filesystem mounted or opened exclusively by another program? The "mount" command does not tell me sdd is mounted: $ sudo mount /dev/sda1 on / type ext3 (rw,relatime,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) /sys on /sys type sysfs (rw,noexec,nosuid,nodev) varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755) varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777) udev on /dev type tmpfs (rw,mode=0755) devshm on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sdc1 on /mnt/r1 type ext3 (rw,relatime,errors=remount-ro) /dev/sdb1 on /mnt/k1 type ext3 (rw,relatime,errors=remount-ro) securityfs on /sys/kernel/security type securityfs (rw) When I ignore the warning and continue the fsck, it reported many errors. How do I get this under control? Is there a better way to figure out if sdd is mounted? Or how is it "busy? How to unmount it then? How to prevent ubuntu from automatically mounting. Or is there something else I am missing? Also from /var/log/syslog I cannot see it is mounted, this is the last part of the startup sequence: kernel: [ 14.229494] ACPI: Power Button (FF) [PWRF] kernel: [ 14.230326] ACPI: AC Adapter [ACAD] (on-line) kernel: [ 14.460136] input: PC Speaker as /devices/platform/pcspkr/input/input3 kernel: [ 14.639366] udev: renamed network interface eth0 to eth1 kernel: [ 14.670187] eth1: link up kernel: [ 16.329607] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/ kernel: [ 16.367540] parport_pc 00:08: reported by Plug and Play ACPI kernel: [ 16.367670] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] kernel: [ 19.425637] NET: Registered protocol family 10 kernel: [ 19.437550] lo: Disabled Privacy Extensions kernel: [ 24.328857] loop: module loaded kernel: [ 24.449293] lp0: using parport0 (interrupt-driven). kernel: [ 26.075499] EXT3 FS on sda1, internal journal kernel: [ 28.380299] kjournald starting. Commit interval 5 seconds kernel: [ 28.381706] EXT3 FS on sdc1, internal journal kernel: [ 28.381747] EXT3-fs: mounted filesystem with ordered data mode. kernel: [ 28.444867] kjournald starting. Commit interval 5 seconds kernel: [ 28.445436] EXT3 FS on sdb1, internal journal kernel: [ 28.445444] EXT3-fs: mounted filesystem with ordered data mode. kernel: [ 31.309766] eth1: no IPv6 routers present kernel: [ 35.054268] ip_tables: (C) 2000-2006 Netfilter Core Team mysqld_safe[4367]: started mysqld[4370]: 100124 14:40:21 InnoDB: Started; log sequence number 0 10130914 mysqld[4370]: 100124 14:40:21 [Note] /usr/sbin/mysqld: ready for connections. mysqld[4370]: Version: '5.0.51a-3ubuntu5.4' socket: '/var/run/mysqld/mysqld.sock' port: 3 /etc/mysql/debian-start[4417]: Upgrading MySQL tables if necessary. /etc/mysql/debian-start[4422]: Looking for 'mysql' in: /usr/bin/mysql /etc/mysql/debian-start[4422]: Looking for 'mysqlcheck' in: /usr/bin/mysqlcheck /etc/mysql/debian-start[4422]: This installation of MySQL is already upgraded to 5.0.51a, u /etc/mysql/debian-start[4436]: Checking for insecure root accounts. /etc/mysql/debian-start[4444]: Checking for crashed MySQL tables.

Read the article

Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed!

- by meder

I restarted my VPS box ( manually/hard restart ) and ever since, mysql fails to start for whatever reason. I did a tail /var/log/syslog and I get this: Feb 20 11:49:33 kyrgyznews mysqld[11461]: ) ;InnoDB: End of page dump 575 Feb 20 11:49:33 kyrgyznews mysqld[11461]: 110220 11:49:33 InnoDB: Page checksum 1045788239, prior-to-4.0.14-form checksum 236985105 576 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: stored checksum 1178062585, prior-to-4.0.14-form stored checksum 236985105 577 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Page lsn 0 10651, low 4 bytes of lsn at page end 10651 578 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Page number (if stored to page already) 3, 579 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: space id (if created with >= MySQL-4.1.1 and stored already) 0 580 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Database page corruption on disk or a failed 581 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: file read of page 3. 582 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: You may have to recover from a backup. 583 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: It is also possible that your operating 584 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: system has corrupted its own file cache 585 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: and rebooting your computer removes the 586 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: error. 587 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: If the corrupt page is an index page 588 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: you can also try to fix the corruption 589 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: by dumping, dropping, and reimporting 590 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: the corrupt table. You can use CHECK 591 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: TABLE to scan your table for corruption. 592 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: See also InnoDB: http://dev.mysql.com/doc/refman/5.0/en/forcing-recovery.html 593 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: about forcing recovery. 594 Feb 20 11:49:33 kyrgyznews mysqld[11461]: InnoDB: Ending processing because of a corrupt database page. 595 Feb 20 11:49:33 kyrgyznews mysqld_safe[11469]: ended 596 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: 0 processes alive and '/usr/bin/mysqladmin --defaults-file=/etc/mysql/debian.cnf ping' resulted in 597 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: ^G/usr/bin/mysqladmin: connect to server at 'localhost' failed 598 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' 599 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! 600 Feb 20 11:49:47 kyrgyznews /etc/init.d/mysql[12228]: 601 Feb 20 11:49:56 kyrgyznews mysqld_safe[13437]: started 602 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: The log sequence number in ibdata files does not match 603 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: the log sequence number in the ib_logfiles! 604 Feb 20 11:49:56 kyrgyznews mysqld[13440]: 110220 11:49:56 InnoDB: Database was not shut down normally! 605 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Starting crash recovery. 606 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Reading tablespace information from the .ibd files... 607 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Restoring possible half-written data pages from the doublewrite 608 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: buffer... 609 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: Database page corruption on disk or a failed 610 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: file read of page 3. 611 Feb 20 11:49:56 kyrgyznews mysqld[13440]: InnoDB: You may have to recover from a backup. I have looked at the page it referenced, http://dev.mysql.com/doc/refman/5.0/en/forcing-innodb-recovery.html, but before messing with any settings I was wondering what experienced DBAs would suggest doing? Is there any harm in forcing the recovery? PS - I did not make any updates to mysql. Version is mysql Ver 14.12 Distrib 5.0.51a, for debian-linux-gnu (i486) using readline 5.2.

Read the article

Openvpn issue with linux

- by catsy

So I've tried to setup openvpn, I followed some guide but it's stuck att "initialization sequence completed" with no connection and I can't find any working solution... here's the log: $Sun Sep 23 19:14:32 2012 OpenVPN 2.1.0 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] [MH] [PF_INET6] [eurephia] built on Jul 20 2010 Enter Auth Username:pumpedup Enter Auth Password: Sun Sep 23 19:14:37 2012 WARNING: No server certificate verification method has been enabled. See http://openvpn.net/howto.html#mitm for more info. Sun Sep 23 19:14:37 2012 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables Sun Sep 23 19:14:37 2012 LZO compression initialized Sun Sep 23 19:14:37 2012 Control Channel MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ] Sun Sep 23 19:14:38 2012 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ] Sun Sep 23 19:14:38 2012 Local Options hash (VER=V4): '41690919' Sun Sep 23 19:14:38 2012 Expected Remote Options hash (VER=V4): '530fdded' Sun Sep 23 19:14:38 2012 Socket Buffers: R=[163840-131072] S=[163840-131072] Sun Sep 23 19:14:38 2012 UDPv4 link local: [undef] Sun Sep 23 19:14:38 2012 UDPv4 link remote: [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:38 2012 TLS: Initial packet from [AF_INET]192.162.102.162:1194, sid=87a95723 a6d7b7f9 Sun Sep 23 19:14:38 2012 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this Sun Sep 23 19:14:38 2012 VERIFY OK: depth=1, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=nVpn_CA/[email protected] Sun Sep 23 19:14:38 2012 VERIFY OK: depth=0, /C=NV/ST=NV/L=nVPN/O=nVpn/CN=server/[email protected] Sun Sep 23 19:14:39 2012 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1542', remote='link-mtu 6042' Sun Sep 23 19:14:39 2012 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1500', remote='tun-mtu 6000' Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Sun Sep 23 19:14:39 2012 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Sun Sep 23 19:14:39 2012 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Sun Sep 23 19:14:39 2012 [server] Peer Connection Initiated with [AF_INET]192.162.102.162:1194 Sun Sep 23 19:14:41 2012 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Sun Sep 23 19:14:41 2012 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 8.8.8.8,dhcp-option DNS 8.8.8.8,route 10.102.162.1,topology net30,ping 10,ping-restart 120,ifconfig 10.102.162.6 10.102.162.5' Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: timers and/or timeouts modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ifconfig/up options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: route options modified Sun Sep 23 19:14:41 2012 OPTIONS IMPORT: --ip-win32 and/or --dhcp-option options modified Sun Sep 23 19:14:41 2012 ROUTE default_gateway=10.0.2.2 Sun Sep 23 19:14:41 2012 TUN/TAP device tun0 opened Sun Sep 23 19:14:41 2012 TUN/TAP TX queue length set to 100 Sun Sep 23 19:14:41 2012 /sbin/ifconfig tun0 10.102.162.6 pointopoint 10.102.162.5 mtu 1500 Sun Sep 23 19:14:41 2012 /sbin/route add -net 192.162.102.162 netmask 255.255.255.255 gw 10.0.2.2 Sun Sep 23 19:14:41 2012 /sbin/route add -net 0.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 128.0.0.0 netmask 128.0.0.0 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 /sbin/route add -net 10.102.162.1 netmask 255.255.255.255 gw 10.102.162.5 Sun Sep 23 19:14:41 2012 Initialization Sequence Completed

Read the article

Mysqld not starting due to apparent db corruption

- by pitosalas

I am very new at admining mysql, and bad for me, something caused the db to get clobbered. There are many error messages in the log that I am not sure how to safely proceed. Can you give some tips? Here's the log: 110107 15:07:15 mysqld started 110107 15:07:15 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... 110107 15:07:15 InnoDB: Starting log scan based on checkpoint at InnoDB: log sequence number 35 515914826. InnoDB: Doing recovery: scanned up to log sequence number 35 515915839 InnoDB: 1 transaction(s) which must be rolled back or cleaned up InnoDB: in total 1 row operations to undo InnoDB: Trx id counter is 0 1697553664 110107 15:07:15 InnoDB: Starting an apply batch of log records to the database... InnoDB: Progress in percents: 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 InnoDB: Apply batch completed InnoDB: Starting rollback of uncommitted transactions InnoDB: Rolling back trx with id 0 1697553198, 1 rows to undoInnoDB: Error: trying to access page number 3522914176 in space 0, InnoDB: space name ./ibdata1, InnoDB: which is outside the tablespace bounds. InnoDB: Byte offset 0, len 16384, i/o type 10 110107 15:07:15InnoDB: Assertion failure in thread 3086403264 in file fil0fil.c line 3922 InnoDB: We intentionally generate a memory trap. InnoDB: Submit a detailed bug report to http://bugs.mysql.com. InnoDB: If you get repeated assertion failures or crashes, even InnoDB: immediately after the mysqld startup, there may be InnoDB: corruption in the InnoDB tablespace. Please refer to InnoDB: http://dev.mysql.com/doc/mysql/en/Forcing_recovery.html InnoDB: about forcing recovery. mysqld got signal 11; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=0 read_buffer_size=131072 max_used_connections=0 max_connections=100 threads_connected=0 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_connections = 217599 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd=(nil) Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... Cannot determine thread, fp=0xbffc55ac, backtrace may not be correct. Stack range sanity check OK, backtrace follows: 0x8139eec 0x83721d5 0x833d897 0x833db71 0x832aa38 0x835f025 0x835f7a3 0x830a77e 0x8326b57 0x831c825 0x8317b8d 0x82a9e66 0x8315732 0x834fc9a 0x828d7c3 0x81c29dd 0x81b5620 0x813d9fe 0x40fdf3 0x80d5ff1 New value of fp=(nil) failed sanity check, terminating stack trace! Please read http://dev.mysql.com/doc/mysql/en/Using_stack_trace.html and follow instructions on how to resolve the stack trace. Resolved stack trace is much more helpful in diagnosing the problem, so please do resolve it The manual page at http://www.mysql.com/doc/en/Crashing.html contains information that should help you find out what is causing the crash. 110107 15:07:15 mysqld ended

Read the article

TFS 2010 Build Custom Activity for Merging Assemblies

- by Jakob Ehn

*** The sample build process template discussed in this post is available for download from here: http://cid-ee034c9f620cd58d.office.live.com/self.aspx/BlogSamples/ILMerge.xaml *** In my previous post I talked about library builds that we use to build and replicate dependencies between applications in TFS. This is typically used for common libraries and tools that several other application need to reference. When the libraries grow in size over time, so does the number of assemblies. So all solutions that uses the common library must reference all the necessary assemblies that they need, and if we for example do a refactoring and extract some code into a new assembly, all the clients must update their references to reflect these changes, otherwise it won’t compile. To improve on this, we use a tool from Microsoft Research called ILMerge (Download from here). It can be used to merge several assemblies into one assembly that contains all types. If you haven’t used this tool before, you should check it out. Previously I have implemented this in builds using a simple batch file that contains the full command, something like this: "%ProgramFiles(x86)%\microsoft\ilmerge\ilmerge.exe" /target:library /attr:ClassLibrary1.bl.dll /out:MyNewLibrary.dll ClassLibrary1.dll ClassLibrar2.dll ClassLibrary3.dll This merges 3 assemblies (ClassLibrary1, 2 and 3) into a new assembly called MyNewLibrary.dll. It will copy the attributes (file version, product version etc..) from ClassLibrary1.dll, using the /attr switch. For more info on ILMerge command line tool, see the above link. This approach works, but requires a little bit too much knowledge for the developers creating builds, therefor I have implemented a custom activity that wraps the use of ILMerge. This makes it much simpler to setup a new build definition and have the build automatically do the merging. The usage of the activity is then implemented as part of the Library Build process template mentioned in the previous post. For this article I have just created a simple build process template that only performs the ILMerge operation. Below is the code for the custom activity. To make it compile, you need to reference the ILMerge.exe assembly. /// <summary> /// Activity for merging a list of assembies into one, using ILMerge /// </summary> public sealed class ILMergeActivity : BaseCodeActivity { /// <summary> /// A list of file paths to the assemblies that should be merged /// </summary> [RequiredArgument] public InArgument<IEnumerable<string>> InputAssemblies { get; set; } /// <summary> /// Full path to the generated assembly /// </summary> [RequiredArgument] public InArgument<string> OutputFile { get; set; } /// <summary> /// Which input assembly that the attibutes for the generated assembly should be copied from. /// Optional. If not specified, the first input assembly will be used /// </summary> public InArgument<string> AttributeFile { get; set; } /// <summary> /// Kind of assembly to generate, dll or exe /// </summary> public InArgument<TargetKindEnum> TargetKind { get; set; } // If your activity returns a value, derive from CodeActivity<TResult> // and return the value from the Execute method. protected override void Execute(CodeActivityContext context) { string message = InputAssemblies.Get(context).Aggregate("", (current, assembly) => current + (assembly + " ")); TrackMessage(context, "Merging " + message + " into " + OutputFile.Get(context)); ILMerge m = new ILMerge(); m.SetInputAssemblies(InputAssemblies.Get(context).ToArray()); m.TargetKind = TargetKind.Get(context) == TargetKindEnum.Dll ? ILMerge.Kind.Dll : ILMerge.Kind.Exe; m.OutputFile = OutputFile.Get(context); m.AttributeFile = !String.IsNullOrEmpty(AttributeFile.Get(context)) ? AttributeFile.Get(context) : InputAssemblies.Get(context).First(); m.SetTargetPlatform(RuntimeEnvironment.GetSystemVersion().Substring(0,2), RuntimeEnvironment.GetRuntimeDirectory()); m.Merge(); TrackMessage(context, "Generated " + m.OutputFile); } } [Browsable(true)] public enum TargetKindEnum { Dll, Exe } NB: The activity inherits from a BaseCodeActivity class which is an internal helper class which contains some methods and properties useful for moste custom activities. In this case, it uses the TrackeMessage method for writing to the build log. You either need to remove the TrackMessage method calls, or implement this yourself (which is not very hard… ) The custom activity has the following input arguments: InputAssemblies A list with the (full) paths to the assemblies to merge OutputFile The name of the resulting merged assembly AttributeFile Which assembly to use as the template for the attribute of the merged assembly. This argument is optional and if left blank, the first assembly in the input list is used TargetKind Decides what type of assembly to create, can be either a dll or an exe Of course, there are more switches to the ILMerge.exe, and these can be exposed as input arguments as well if you need it. To show how the custom activity can be used, I have attached a build process template (see link at the top of this post) that merges the output of the projects being built (CommonLibrary.dll and CommonLibrary2.dll) into a merged assembly (NewLibrary.dll). The build process template has the following custom process parameters: The Assemblies To Merge argument is passed into a FindMatchingFiles activity to located all assemblies that are located in the BinariesDirectory folder after the compilation has been performed by Team Build. Here is the complete sequence of activities that performs the merge operation. It is located at the end of the Try, Compile, Test and Associate… sequence: It splits the AssembliesToMerge parameter and appends the full path (using the BinariesDirectory variable) and then enumerates the matching files using the FindMatchingFiles activity. When running the build, you can see that it merges two assemblies into a new one: And the merged assembly (and associated pdb file) is copied to the drop location together with the rest of the assemblies:

Read the article

SQL SERVER – Weekly Series – Memory Lane – #032

- by Pinal Dave

Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Complete Series of Database Coding Standards and Guidelines SQL SERVER Database Coding Standards and Guidelines – Introduction SQL SERVER – Database Coding Standards and Guidelines – Part 1 SQL SERVER – Database Coding Standards and Guidelines – Part 2 SQL SERVER Database Coding Standards and Guidelines Complete List Download Explanation and Example – SELF JOIN When all of the data you require is contained within a single table, but data needed to extract is related to each other in the table itself. Examples of this type of data relate to Employee information, where the table may have both an Employee’s ID number for each record and also a field that displays the ID number of an Employee’s supervisor or manager. To retrieve the data tables are required to relate/join to itself. Insert Multiple Records Using One Insert Statement – Use of UNION ALL This is very interesting question I have received from new developer. How can I insert multiple values in table using only one insert? Now this is interesting question. When there are multiple records are to be inserted in the table following is the common way using T-SQL. Function to Display Current Week Date and Day – Weekly Calendar Straight blog post with script to find current week date and day based on the parameters passed in the function. 2008 In my beginning years, I have almost same confusion as many of the developer had in their earlier years. Here are two of the interesting question which I have attempted to answer in my early year. Even if you are experienced developer may be you will still like to read following two questions: Order Of Column In Index Order of Conditions in WHERE Clauses Example of DISTINCT in Aggregate Functions Have you ever used DISTINCT with the Aggregation Function? Here is a simple example about how users can do it. Create a Comma Delimited List Using SELECT Clause From Table Column Straight to script example where I explained how to do something easy and quickly. Compound Assignment Operators SQL SERVER 2008 has introduced new concept of Compound Assignment Operators. Compound Assignment Operators are available in many other programming languages for quite some time. Compound Assignment Operators is operator where variables are operated upon and assigned on the same line. PIVOT and UNPIVOT Table Examples Here is a very interesting question – the answer to the question can be YES or NO both. “If we PIVOT any table and UNPIVOT that table do we get our original table?” Read the blog post to get the explanation of the question above. 2009 What is Interim Table – Simple Definition of Interim Table The interim table is a table that is generated by joining two tables and not the final result table. In other words, when two tables are joined they create an interim table as resultset but the resultset is not final yet. It may be possible that more tables are about to join on the interim table, and more operations are still to be applied on that table (e.g. Order By, Having etc). Besides, it may be possible that there is no interim table; sometimes final table is what is generated when the query is run. 2010 Stored Procedure and Transactions If Stored Procedure is transactional then, it should roll back complete transactions when it encounters any errors. Well, that does not happen in this case, which proves that Stored Procedure does not only provide just the transactional feature to a batch of T-SQL. Generate Database Script for SQL Azure When talking about SQL Azure the most common complaint I hear is that the script generated from stand-along SQL Server database is not compatible with SQL Azure. This was true for some time for sure but not any more. If you have SQL Server 2008 R2 installed you can follow the guideline below to generate a script which is compatible with SQL Azure. Convert IN to EXISTS – Performance Talk It is NOT necessary that every time when IN is replaced by EXISTS it gives better performance. However, in our case listed above it does for sure give better performance. You can read about this subject in the associated blog post. Subquery or Join – Various Options – SQL Server Engine Knows the Best Every single time whenever there is a performance tuning exercise, I hear the conversation from developer where some prefer subquery and some prefer join. In this two part blog post, I explain the same in the detail with examples. Part 1 | Part 2 Merge Operations – Insert, Update, Delete in Single Execution MERGE is a new feature that provides an efficient way to do multiple DML operations. In earlier versions of SQL Server, we had to write separate statements to INSERT, UPDATE, or DELETE data based on certain conditions; however, at present, by using the MERGE statement, we can include the logic of such data changes in one statement that even checks when the data is matched and then just update it, and similarly, when the data is unmatched, it is inserted. 2011 Puzzle – Statistics are not updated but are Created Once Here is the quick scenario about my setup. Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated – WHY? Question to You – When to use Function and When to use Stored Procedure Personally, I believe that they are both different things - they cannot be compared. I can say, it will be like comparing apples and oranges. Each has its own unique use. However, they can be used interchangeably at many times and in real life (i.e., production environment). I have personally seen both of these being used interchangeably many times. This is the precise reason for asking this question. 2012 In year 2012 I had two interesting series ran on the blog. If there is no fun in learning, the learning becomes a burden. For the same reason, I had decided to build a three part quiz around SEQUENCE. The quiz was to identify the next value of the sequence. I encourage all of you to take part in this fun quiz. Guess the Next Value – Puzzle 1 Guess the Next Value – Puzzle 2 Guess the Next Value – Puzzle 3 Guess the Next Value – Puzzle 4 Simple Example to Configure Resource Governor – Introduction to Resource Governor Resource Governor is a feature which can manage SQL Server Workload and System Resource Consumption. We can limit the amount of CPU and memory consumption by limiting /governing /throttling on the SQL Server. If there are different workloads running on SQL Server and each of the workload needs different resources or when workloads are competing for resources with each other and affecting the performance of the whole server resource governor is a very important task. Tricks to Replace SELECT * with Column Names – SQL in Sixty Seconds #017 – Video Retrieves unnecessary columns and increases network traffic When a new columns are added views needs to be refreshed manually Leads to usage of sub-optimal execution plan Uses clustered index in most of the cases instead of using optimal index It is difficult to debug SQL SERVER – Load Generator – Free Tool From CodePlex The best part of this SQL Server Load Generator is that users can run multiple simultaneous queries again SQL Server using different login account and different application name. The interface of the tool is extremely easy to use and very intuitive as well. A Puzzle – Swap Value of Column Without Case Statement Let us assume there is a single column in the table called Gender. The challenge is to write a single update statement which will flip or swap the value in the column. For example if the value in the gender column is ‘male’ swap it with ‘female’ and if the value is ‘female’ swap it with ‘male’. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Using Apache FOP from .NET level

- by Lukasz Kurylo

In one of my previous posts I was talking about FO.NET which I was using to generate a pdf documents from XSL-FO. FO.NET is one of the .NET ports of Apache FOP. Unfortunatelly it is no longer maintained. I known it when I decidec to use it, because there is a lack of available (free) choices for .NET to render a pdf form XSL-FO. I hoped in this implementation I will find all I need to create a pdf file with my really simple requirements. FO.NET is a port from some old version of Apache FOP and I found really quickly that there is a lack of some features that I needed, like dotted borders, double borders or support for margins. So I started to looking for some alternatives. I didn’t try the NFOP, another port of Apache FOP, because I found something I think much more better, the IKVM.NET project. IKVM.NET it is not a pdf renderer. So what it is? From the project site: IKVM.NET is an implementation of Java for Mono and the Microsoft .NET Framework. It includes the following components: a Java Virtual Machine implemented in .NET a .NET implementation of the Java class libraries tools that enable Java and .NET interoperability In the simplest form IKVM.NET allows to use a Java code library in the C# code and vice versa. I tried to use an Apache FOP, the best I think open source pdf –> XSL-FO renderer written in Java from my project written in C# using an IKVM.NET and it work like a charm. In the rest of the post I want to show, how to prepare a .NET *.dll class library from Apache FOP *.jar’s with IKVM.NET and generate a simple Hello world pdf document. To start playing with IKVM.NET and Apache FOP we need to download their packages: IKVM.NET Apache FOP and then unpack them. From the FOP directory copy all the *.jar’s files from lib and build catalogs to some location, e.g. d:\fop. Second step is to build the *.dll library from these files. On the console execute the following comand: ikvmc –target:library –out:d:\fop\fop.dll –recurse:d:\fop The ikvmc is located in the bin subdirectory where you unpacked the IKVM.NET. You must execute this command from this catalog, add this path to the global variable PATH or specify the full path to the bin subdirectory. In no error occurred during this process, the fop.dll library should be created. Right now we can create a simple project to test if we can create a pdf file. So let’s create a simple console project application and add reference to the fop.dll and the IKVM dll’s: IKVM.OpenJDK.Core and IKVM.OpenJDK.XML.API. Full code to generate a pdf file from XSL-FO template: static void Main(string[] args) { //initialize the Apache FOP FopFactory fopFactory = FopFactory.newInstance(); //in this stream we will get the generated pdf file OutputStream o = new DotNetOutputMemoryStream(); try { Fop fop = fopFactory.newFop("application/pdf", o); TransformerFactory factory = TransformerFactory.newInstance(); Transformer transformer = factory.newTransformer(); //read the template from disc Source src = new StreamSource(new File("HelloWorld.fo")); Result res = new SAXResult(fop.getDefaultHandler()); transformer.transform(src, res); } finally { o.close(); } using (System.IO.FileStream fs = System.IO.File.Create("HelloWorld.pdf")) { //write from the .NET MemoryStream stream to disc the generated pdf file var data = ((DotNetOutputMemoryStream)o).Stream.GetBuffer(); fs.Write(data, 0, data.Length); } Process.Start("HelloWorld.pdf"); System.Console.ReadLine(); } Apache FOP be default using a Java’s Xalan to work with XML files. I didn’t find a way to replace this piece of code with equivalent from .NET standard library. If any error or warning will occure during generating the pdf file, on the console will ge shown, that’s why I inserted the last line in the sample above. The DotNetOutputMemoryStream this is my wrapper for the Java OutputStream. I have created it to have the possibility to exchange data between the .NET <-> Java objects. It’s implementation: class DotNetOutputMemoryStream : OutputStream { private System.IO.MemoryStream ms = new System.IO.MemoryStream(); public System.IO.MemoryStream Stream { get { return ms; } } public override void write(int i) { ms.WriteByte((byte)i); } public override void write(byte[] b, int off, int len) { ms.Write(b, off, len); } public override void write(byte[] b) { ms.Write(b, 0, b.Length); } public override void close() { ms.Close(); } public override void flush() { ms.Flush(); } } The last thing we need, this is the HelloWorld.fo template. <?xml version="1.0" encoding="utf-8"?> <fo:root xmlns:fo="http://www.w3.org/1999/XSL/Format" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <fo:layout-master-set> <fo:simple-page-master master-name="simple" page-height="29.7cm" page-width="21cm" margin-top="1.8cm" margin-bottom="0.8cm" margin-left="1.6cm" margin-right="1.2cm"> <fo:region-body margin-top="3cm"/> <fo:region-before extent="3cm"/> <fo:region-after extent="1.5cm"/> </fo:simple-page-master> </fo:layout-master-set> <fo:page-sequence master-reference="simple"> <fo:flow flow-name="xsl-region-body"> <fo:block font-size="18pt" color="black" text-align="center"> Hello, World! </fo:block> </fo:flow> </fo:page-sequence> </fo:root> I’m not going to explain how how this template is created, because this will be covered in the near future posts. Generated pdf file should look that:

Read the article

How to store generated eigen faces for future face recognition?

- by user3237134

My code works in the following manner: 1.First, it obtains several images from the training set 2.After loading these images, we find the normalized faces,mean face and perform several calculation. 3.Next, we ask for the name of an image we want to recognize 4.We then project the input image into the eigenspace, and based on the difference from the eigenfaces we make a decision. 5.Depending on eigen weight vector for each input image we make clusters using kmeans command. Source code i tried: clear all close all clc % number of images on your training set. M=1200; %Chosen std and mean. %It can be any number that it is close to the std and mean of most of the images. um=60; ustd=32; %read and show images(bmp); S=[]; %img matrix for i=1:M str=strcat(int2str(i),'.jpg'); %concatenates two strings that form the name of the image eval('img=imread(str);'); [irow icol d]=size(img); % get the number of rows (N1) and columns (N2) temp=reshape(permute(img,[2,1,3]),[irow*icol,d]); %creates a (N1*N2)x1 matrix S=[S temp]; %X is a N1*N2xM matrix after finishing the sequence %this is our S end %Here we change the mean and std of all images. We normalize all images. %This is done to reduce the error due to lighting conditions. for i=1:size(S,2) temp=double(S(:,i)); m=mean(temp); st=std(temp); S(:,i)=(temp-m)*ustd/st+um; end %show normalized images for i=1:M str=strcat(int2str(i),'.jpg'); img=reshape(S(:,i),icol,irow); img=img'; end %mean image; m=mean(S,2); %obtains the mean of each row instead of each column tmimg=uint8(m); %converts to unsigned 8-bit integer. Values range from 0 to 255 img=reshape(tmimg,icol,irow); %takes the N1*N2x1 vector and creates a N2xN1 matrix img=img'; %creates a N1xN2 matrix by transposing the image. % Change image for manipulation dbx=[]; % A matrix for i=1:M temp=double(S(:,i)); dbx=[dbx temp]; end %Covariance matrix C=A'A, L=AA' A=dbx'; L=A*A'; % vv are the eigenvector for L % dd are the eigenvalue for both L=dbx'*dbx and C=dbx*dbx'; [vv dd]=eig(L); % Sort and eliminate those whose eigenvalue is zero v=[]; d=[]; for i=1:size(vv,2) if(dd(i,i)>1e-4) v=[v vv(:,i)]; d=[d dd(i,i)]; end end %sort, will return an ascending sequence [B index]=sort(d); ind=zeros(size(index)); dtemp=zeros(size(index)); vtemp=zeros(size(v)); len=length(index); for i=1:len dtemp(i)=B(len+1-i); ind(i)=len+1-index(i); vtemp(:,ind(i))=v(:,i); end d=dtemp; v=vtemp; %Normalization of eigenvectors for i=1:size(v,2) %access each column kk=v(:,i); temp=sqrt(sum(kk.^2)); v(:,i)=v(:,i)./temp; end %Eigenvectors of C matrix u=[]; for i=1:size(v,2) temp=sqrt(d(i)); u=[u (dbx*v(:,i))./temp]; end %Normalization of eigenvectors for i=1:size(u,2) kk=u(:,i); temp=sqrt(sum(kk.^2)); u(:,i)=u(:,i)./temp; end % show eigenfaces; for i=1:size(u,2) img=reshape(u(:,i),icol,irow); img=img'; img=histeq(img,255); end % Find the weight of each face in the training set. omega = []; for h=1:size(dbx,2) WW=[]; for i=1:size(u,2) t = u(:,i)'; WeightOfImage = dot(t,dbx(:,h)'); WW = [WW; WeightOfImage]; end omega = [omega WW]; end % Acquire new image % Note: the input image must have a bmp or jpg extension. % It should have the same size as the ones in your training set. % It should be placed on your desktop ed_min=[]; srcFiles = dir('G:\newdatabase\*.jpg'); % the folder in which ur images exists for b = 1 : length(srcFiles) filename = strcat('G:\newdatabase\',srcFiles(b).name); Imgdata = imread(filename); InputImage=Imgdata; InImage=reshape(permute((double(InputImage)),[2,1,3]),[irow*icol,1]); temp=InImage; me=mean(temp); st=std(temp); temp=(temp-me)*ustd/st+um; NormImage = temp; Difference = temp-m; p = []; aa=size(u,2); for i = 1:aa pare = dot(NormImage,u(:,i)); p = [p; pare]; end InImWeight = []; for i=1:size(u,2) t = u(:,i)'; WeightOfInputImage = dot(t,Difference'); InImWeight = [InImWeight; WeightOfInputImage]; end noe=numel(InImWeight); % Find Euclidean distance e=[]; for i=1:size(omega,2) q = omega(:,i); DiffWeight = InImWeight-q; mag = norm(DiffWeight); e = [e mag]; end ed_min=[ed_min MinimumValue]; theta=6.0e+03; %disp(e) z(b,:)=InImWeight; end IDX = kmeans(z,5); clustercount=accumarray(IDX, ones(size(IDX))); disp(clustercount); QUESTIONS: 1.It is working fine for M=50(i.e Training set contains 50 images) but not for M=1200(i.e Training set contains 1200 images).It is not showing any error.There is no output.I waited for 10 min still there is no output. I think it is going infinite loop.What is the problem?Where i was wrong? 2.Instead of running the training set everytime how eigen faces generated are stored so that stored eigen faces are used for future face recoginition for a new input image.So it reduces wastage of time.

Read the article

Vectorization of matlab code for faster execution

- by user3237134

My code works in the following manner: 1.First, it obtains several images from the training set 2.After loading these images, we find the normalized faces,mean face and perform several calculation. 3.Next, we ask for the name of an image we want to recognize 4.We then project the input image into the eigenspace, and based on the difference from the eigenfaces we make a decision. 5.Depending on eigen weight vector for each input image we make clusters using kmeans command. Source code i tried: clear all close all clc % number of images on your training set. M=1200; %Chosen std and mean. %It can be any number that it is close to the std and mean of most of the images. um=60; ustd=32; %read and show images(bmp); S=[]; %img matrix for i=1:M str=strcat(int2str(i),'.jpg'); %concatenates two strings that form the name of the image eval('img=imread(str);'); [irow icol d]=size(img); % get the number of rows (N1) and columns (N2) temp=reshape(permute(img,[2,1,3]),[irow*icol,d]); %creates a (N1*N2)x1 matrix S=[S temp]; %X is a N1*N2xM matrix after finishing the sequence %this is our S end %Here we change the mean and std of all images. We normalize all images. %This is done to reduce the error due to lighting conditions. for i=1:size(S,2) temp=double(S(:,i)); m=mean(temp); st=std(temp); S(:,i)=(temp-m)*ustd/st+um; end %show normalized images for i=1:M str=strcat(int2str(i),'.jpg'); img=reshape(S(:,i),icol,irow); img=img'; end %mean image; m=mean(S,2); %obtains the mean of each row instead of each column tmimg=uint8(m); %converts to unsigned 8-bit integer. Values range from 0 to 255 img=reshape(tmimg,icol,irow); %takes the N1*N2x1 vector and creates a N2xN1 matrix img=img'; %creates a N1xN2 matrix by transposing the image. % Change image for manipulation dbx=[]; % A matrix for i=1:M temp=double(S(:,i)); dbx=[dbx temp]; end %Covariance matrix C=A'A, L=AA' A=dbx'; L=A*A'; % vv are the eigenvector for L % dd are the eigenvalue for both L=dbx'*dbx and C=dbx*dbx'; [vv dd]=eig(L); % Sort and eliminate those whose eigenvalue is zero v=[]; d=[]; for i=1:size(vv,2) if(dd(i,i)>1e-4) v=[v vv(:,i)]; d=[d dd(i,i)]; end end %sort, will return an ascending sequence [B index]=sort(d); ind=zeros(size(index)); dtemp=zeros(size(index)); vtemp=zeros(size(v)); len=length(index); for i=1:len dtemp(i)=B(len+1-i); ind(i)=len+1-index(i); vtemp(:,ind(i))=v(:,i); end d=dtemp; v=vtemp; %Normalization of eigenvectors for i=1:size(v,2) %access each column kk=v(:,i); temp=sqrt(sum(kk.^2)); v(:,i)=v(:,i)./temp; end %Eigenvectors of C matrix u=[]; for i=1:size(v,2) temp=sqrt(d(i)); u=[u (dbx*v(:,i))./temp]; end %Normalization of eigenvectors for i=1:size(u,2) kk=u(:,i); temp=sqrt(sum(kk.^2)); u(:,i)=u(:,i)./temp; end % show eigenfaces; for i=1:size(u,2) img=reshape(u(:,i),icol,irow); img=img'; img=histeq(img,255); end % Find the weight of each face in the training set. omega = []; for h=1:size(dbx,2) WW=[]; for i=1:size(u,2) t = u(:,i)'; WeightOfImage = dot(t,dbx(:,h)'); WW = [WW; WeightOfImage]; end omega = [omega WW]; end % Acquire new image % Note: the input image must have a bmp or jpg extension. % It should have the same size as the ones in your training set. % It should be placed on your desktop ed_min=[]; srcFiles = dir('G:\newdatabase\*.jpg'); % the folder in which ur images exists for b = 1 : length(srcFiles) filename = strcat('G:\newdatabase\',srcFiles(b).name); Imgdata = imread(filename); InputImage=Imgdata; InImage=reshape(permute((double(InputImage)),[2,1,3]),[irow*icol,1]); temp=InImage; me=mean(temp); st=std(temp); temp=(temp-me)*ustd/st+um; NormImage = temp; Difference = temp-m; p = []; aa=size(u,2); for i = 1:aa pare = dot(NormImage,u(:,i)); p = [p; pare]; end InImWeight = []; for i=1:size(u,2) t = u(:,i)'; WeightOfInputImage = dot(t,Difference'); InImWeight = [InImWeight; WeightOfInputImage]; end noe=numel(InImWeight); % Find Euclidean distance e=[]; for i=1:size(omega,2) q = omega(:,i); DiffWeight = InImWeight-q; mag = norm(DiffWeight); e = [e mag]; end ed_min=[ed_min MinimumValue]; theta=6.0e+03; %disp(e) z(b,:)=InImWeight; end IDX = kmeans(z,5); clustercount=accumarray(IDX, ones(size(IDX))); disp(clustercount); Running time for 50 images:Elapsed time is 103.947573 seconds. QUESTIONS: 1.It is working fine for M=50(i.e Training set contains 50 images) but not for M=1200(i.e Training set contains 1200 images).It is not showing any error.There is no output.I waited for 10 min still there is no output. I think it is going infinite loop.What is the problem?Where i was wrong?

Read the article

How can unrealscript halt event handler execution after an arbitrary number of lines with no return or error?

- by Dan Cowell

I have created a class that extends TcpLink and is instantiated in a custom Kismet Sequence Action. It is being instantiated correctly and is making the GET HTTP request that I need it to (I have checked my access log in apache) and Apache is responding to the request with the appropriate content. The problem I have is that I'm using the event receive mode and it appears that somehow the handler for the Opened event is halted after a specific number of lines of code have executed. Here is my code for the Opened event: event Opened() { // A connection was established WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] event opened"); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sending simple HTTP query"); //The HTTP GET request //char(13) and char(10) are carrage returns and new lines requesttext = "userId="$userId$"&apartmentId="$apartmentId; SendText("GET /"$path$"?"$requesttext$" HTTP/1.0"); SendText(chr(13)$chr(10)); SendText("Host: "$TargetHost); SendText(chr(13)$chr(10)); SendText("Connection: Close"); SendText(chr(13)$chr(10)$chr(13)$chr(10)); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sent request: "$requesttext); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] end HTTP query"); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] LinkState: "$LinkState); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] LinkMode: "$LinkMode); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] ReceiveMode: "$ReceiveMode); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Error: "$string(GetLastError())); } As you can see, a number of the Broadcast calls have been commented out. Initially, only the lines up to the Broadcast containing "[DNomad_TcpLinkClient] Sent request: " were being executed and none of the Broadcasts were commented out. After commenting out that line, the next Broadcast was successful and so on and so forth. As a test, I commented out the very first Broadcast to see if the connection closing had any effect: // A connection was established //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] event opened"); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sending simple HTTP query"); Upon doing that, an additional Broadcast at the end of the function executed. Thus the inference that there is an upper limit to the number of lines executed. Additionally, my ReceivedText handler is never called, despite Apache returning the correct HTTP 200 response with a body. My working hypothesis is that somehow after the Sequence Action finishes executing the garbage collector cleans up the TcpLinkClient instance. My biggest source of confusion with that is how on earth it does it during the execution of an event handler. Has anyone ever seen anything like this before? My full TcpLinkClient class is below: /* * TcpLinkClient based on an example usage of the TcpLink class by Michiel 'elmuerte' Hendriks for Epic Games, Inc. * */ class DNomad_TcpLinkClient extends TcpLink; var PlayerController PC; var string TargetHost; var int TargetPort; var string path; var string requesttext; var string userId; var string apartmentId; var string statusCode; var string responseData; event PostBeginPlay() { super.PostBeginPlay(); } function DoTcpLinkRequest(string uid, string id) //removes having to send a host { userId = uid; apartmentId = id; Resolve(targethost); } function string GetStatus() { return statusCode; } event Resolved( IpAddr Addr ) { // The hostname was resolved succefully WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] "$TargetHost$" resolved to "$ IpAddrToString(Addr)); // Make sure the correct remote port is set, resolving doesn't set // the port value of the IpAddr structure Addr.Port = TargetPort; //dont comment out this log because it rungs the function bindport WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Bound to port: "$ BindPort() ); if (!Open(Addr)) { WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Open failed"); } } event ResolveFailed() { WorldInfo.Game.Broadcast(self, "[TcpLinkClient] Unable to resolve "$TargetHost); // You could retry resolving here if you have an alternative // remote host. //send failed message to scaleform UI //JunHud(JunPlayerController(PC).myHUD).JunMovie.CallSetHTML("Failed"); } event Opened() { // A connection was established //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] event opened"); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sending simple HTTP query"); //The HTTP GET request //char(13) and char(10) are carrage returns and new lines requesttext = "userId="$userId$"&apartmentId="$apartmentId; SendText("GET /"$path$"?"$requesttext$" HTTP/1.0"); SendText(chr(13)$chr(10)); SendText("Host: "$TargetHost); SendText(chr(13)$chr(10)); SendText("Connection: Close"); SendText(chr(13)$chr(10)$chr(13)$chr(10)); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Sent request: "$requesttext); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] end HTTP query"); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] LinkState: "$LinkState); //WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] LinkMode: "$LinkMode); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] ReceiveMode: "$ReceiveMode); WorldInfo.Game.Broadcast(self, "[DNomad_TcpLinkClient] Error: "$string(GetLastError())); } event Closed() { // In this case the remote client should have automatically closed // the connection, because we requested it in the HTTP request. WorldInfo.Game.Broadcast(self, "Connection closed."); // After the connection was closed we could establish a new // connection using the same TcpLink instance. } event ReceivedText( string Text ) { WorldInfo.Game.Broadcast(self, "Received Text: "$Text); //we dont want the header info, so we split the string after two new lines Text = Split(Text, chr(13)$chr(10)$chr(13)$chr(10), true); WorldInfo.Game.Broadcast(self, "Split Text: "$Text); statusCode = Text; } event ReceivedLine( string Line ) { WorldInfo.Game.Broadcast(self, "Received Line: "$Line); } event ReceivedBinary( int Count, byte B[255] ) { WorldInfo.Game.Broadcast(self, "Received Binary of length: "$Count); } defaultproperties { TargetHost="127.0.0.1" TargetPort=80 //default for HTTP LinkMode=MODE_Text ReceiveMode=RMODE_Event path = "dnomad/datafeed.php" userId = "0"; apartmentId = "0"; statusCode = ""; send = false; }

Read the article

IIS 7.0 informational HTTP status codes

- by Samir R. Bhogayta

1xx - Informational These HTTP status codes indicate a provisional response. The client computer receives one or more 1xx responses before the client computer receives a regular response. IIS 7.0 uses the following informational HTTP status codes: 100 - Continue. 101 - Switching protocols. 2xx - Success These HTTP status codes indicate that the server successfully accepted the request. IIS 7.0 uses the following success HTTP status codes: 200 - OK. The client request has succeeded. 201 - Created. 202 - Accepted. 203 - Nonauthoritative information. 204 - No content. 205 - Reset content. 206 - Partial content. 3xx - Redirection These HTTP status codes indicate that the client browser must take more action to fulfill the request. For example, the client browser may have to request a different page on the server. Or, the client browser may have to repeat the request by using a proxy server. IIS 7.0 uses the following redirection HTTP status codes: 301 - Moved permanently. 302 - Object moved. 304 - Not modified. 307 - Temporary redirect. 4xx - Client error These HTTP status codes indicate that an error occurred and that the client browser appears to be at fault. For example, the client browser may have requested a page that does not exist. Or, the client browser may not have provided valid authentication information. IIS 7.0 uses the following client error HTTP status codes: 400 - Bad request. The request could not be understood by the server due to malformed syntax. The client should not repeat the request without modifications. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 400 error: 400.1 - Invalid Destination Header. 400.2 - Invalid Depth Header. 400.3 - Invalid If Header. 400.4 - Invalid Overwrite Header. 400.5 - Invalid Translate Header. 400.6 - Invalid Request Body. 400.7 - Invalid Content Length. 400.8 - Invalid Timeout. 400.9 - Invalid Lock Token. 401 - Access denied. IIS 7.0 defines several HTTP status codes that indicate a more specific cause of a 401 error. The following specific HTTP status codes are displayed in the client browser but are not displayed in the IIS log: 401.1 - Logon failed. 401.2 - Logon failed due to server configuration. 401.3 - Unauthorized due to ACL on resource. 401.4 - Authorization failed by filter. 401.5 - Authorization failed by ISAPI/CGI application. 403 - Forbidden. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 403 error: 403.1 - Execute access forbidden. 403.2 - Read access forbidden. 403.3 - Write access forbidden. 403.4 - SSL required. 403.5 - SSL 128 required. 403.6 - IP address rejected. 403.7 - Client certificate required. 403.8 - Site access denied. 403.9 - Forbidden: Too many clients are trying to connect to the Web server. 403.10 - Forbidden: Web server is configured to deny Execute access. 403.11 - Forbidden: Password has been changed. 403.12 - Mapper denied access. 403.13 - Client certificate revoked. 403.14 - Directory listing denied. 403.15 - Forbidden: Client access licenses have exceeded limits on the Web server. 403.16 - Client certificate is untrusted or invalid. 403.17 - Client certificate has expired or is not yet valid. 403.18 - Cannot execute requested URL in the current application pool. 403.19 - Cannot execute CGI applications for the client in this application pool. 403.20 - Forbidden: Passport logon failed. 403.21 - Forbidden: Source access denied. 403.22 - Forbidden: Infinite depth is denied. 404 - Not found. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 404 error: 404.0 - Not found. 404.1 - Site Not Found. 404.2 - ISAPI or CGI restriction. 404.3 - MIME type restriction. 404.4 - No handler configured. 404.5 - Denied by request filtering configuration. 404.6 - Verb denied. 404.7 - File extension denied. 404.8 - Hidden namespace. 404.9 - File attribute hidden. 404.10 - Request header too long. 404.11 - Request contains double escape sequence. 404.12 - Request contains high-bit characters. 404.13 - Content length too large. 404.14 - Request URL too long. 404.15 - Query string too long. 404.16 - DAV request sent to the static file handler. 404.17 - Dynamic content mapped to the static file handler via a wildcard MIME mapping. 404.18 - Querystring sequence denied. 404.19 - Denied by filtering rule. 405 - Method Not Allowed. 406 - Client browser does not accept the MIME type of the requested page. 408 - Request timed out. 412 - Precondition failed. 5xx - Server error These HTTP status codes indicate that the server cannot complete the request because the server encounters an error. IIS 7.0 uses the following server error HTTP status codes: 500 - Internal server error. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 500 error: 500.0 - Module or ISAPI error occurred. 500.11 - Application is shutting down on the Web server. 500.12 - Application is busy restarting on the Web server. 500.13 - Web server is too busy. 500.15 - Direct requests for Global.asax are not allowed. 500.19 - Configuration data is invalid. 500.21 - Module not recognized. 500.22 - An ASP.NET httpModules configuration does not apply in Managed Pipeline mode. 500.23 - An ASP.NET httpHandlers configuration does not apply in Managed Pipeline mode. 500.24 - An ASP.NET impersonation configuration does not apply in Managed Pipeline mode. 500.50 - A rewrite error occurred during RQ_BEGIN_REQUEST notification handling. A configuration or inbound rule execution error occurred. Note Here is where the distributed rules configuration is read for both inbound and outbound rules. 500.51 - A rewrite error occurred during GL_PRE_BEGIN_REQUEST notification handling. A global configuration or global rule execution error occurred. Note Here is where the global rules configuration is read. 500.52 - A rewrite error occurred during RQ_SEND_RESPONSE notification handling. An outbound rule execution occurred. 500.53 - A rewrite error occurred during RQ_RELEASE_REQUEST_STATE notification handling. An outbound rule execution error occurred. The rule is configured to be executed before the output user cache gets updated. 500.100 - Internal ASP error. 501 - Header values specify a configuration that is not implemented. 502 - Web server received an invalid response while acting as a gateway or proxy. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 502 error: 502.1 - CGI application timeout. 502.2 - Bad gateway. 503 - Service unavailable. IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 503 error: 503.0 - Application pool unavailable. 503.2 - Concurrent request limit exceeded.

Read the article

SQL SERVER – Weekly Series – Memory Lane – #031

- by Pinal Dave

Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Find Table without Clustered Index – Find Table with no Primary Key Clustered index is very important concept for any table. They impact the performance very heavily. Here is a quick script to find tables without a clustered index. Replace TEXT with VARCHAR(MAX) – Stop using TEXT, NTEXT, IMAGE Data Types Question: “Is VARCHAR (MAX) big enough to store the TEXT field?” Answer: “Yes, VARCHAR(MAX) is big enough to accommodate TEXT field. TEXT, NTEXT and IMAGE data types of SQL Server 2000 will be deprecated in a future version of SQL Server, SQL Server 2005 provides backward compatibility to data types but it is recommended to use new data types which are VARHCAR (MAX), NVARCHAR (MAX) and VARBINARY (MAX).” Limiting Result Sets by Using TABLESAMPLE – Examples Introduced in SQL Server 2005, TABLESAMPLE allows you to extract a sampling of rows from a table in the FROM clause. The rows retrieved are random and they are are not in any order. This sampling can be based on a percentage of number of rows. You can use TABLESAMPLE when only a sampling of rows is necessary for the application instead of a full result set. User Defined Functions (UDF) Limitations UDF have its own advantage and usage but in this article we will see the limitation of UDF. Things UDF can not do and why Stored Procedure are considered as more flexible then UDFs. Stored Procedure are more flexibility then User Defined Functions(UDF). However, this blog post is a good read to know what are the limitations of UDF. Change Database Compatible Level – Backward Compatibility For a long time SQL Server stayed on the compatibility level of 80 which is of SQL Server 2000. However, as soon as SQL Server 2005 introduced the issue of compatibility was quite a major issue. Since that time MS has been releasing the versions at every 2-3 years, changing compatibility is a ever popular topic. In this blog post, we learn how we can do the same using T-SQL. We can also do the same using SSMS and here is the blog post for the same: Change Database Compatible Level – Backward Compatibility – Part 2 – Management Studio. Constraint on VARCHAR(MAX) Field To Limit It Certain Length How can I limit the VARCHAR(MAX) field with maximum length of 12500 characters only. His Question was valid as our application was allowed 12500 characters. First of all – this requirement is bit strange but if someone wants to do the same, they can do it as described in this blog post. 2008 UNPIVOT Table Example Understanding UNPIVOT can be very complicated at times. In this blog post, I have attempted to explain the same concept in very simple words. Create Default Constraint Over Table Column A simple straight to script blog post – I still use this blog quite many times for my own reference. UDF – Get the Day of the Week Function It took me 4 iteration to find this very simple function which can immediately get the day of the week in a single line. 2009 Find Hostname and Current Logged In User Name There are two tricks listed in this blog post where users can find out the hostname and current logged user name immediately and very easily. Interesting Observation of Logon Trigger On All Servers When I was doing a project, I made an interesting observation of executing a logon trigger multiple times. It was absolutely unexpected for me! As I was logging only once, naturally, I was expecting the entry only once. However, it did it multiple times on different threads – indeed an eccentric phenomenon at first sight! Difference Between Candidate Keys and Primary Key One needs to be very careful in selecting the Primary Key as an incorrect selection can adversely impact the database architect and future normalization. For a Candidate Key to qualify as a Primary Key, it should be Non-NULL and unique in any domain. I have observed quite often that Primary Keys are seldom changed. I would like to have your feedback on not changing a Primary Key. Create Multiple Filegroup For Single Database Why should one create multiple file group for any database and what are the advantages of the same. In this blog post, I explain the same in detail. List All Objects Created on All Filegroups in Database In this blog post we discuss the essential question – “How can I find which object belongs to which filegroup. Is there any way to know this?” 2010 DATE and TIME in SQL Server 2008 When DATE is converted to DATETIME it adds the of midnight. When TIME is converted to DATETIME it adds the date of 1900 and it is something one wants to consider if you are going to run scripts from SQL Server 2008 to earlier version with CONVERT. Disabled Index and Update Statistics If you do not need a nonclustered index, I suggest you to drop it as keeping them disabled is an overhead on your system. This is because every time the statistics are updated for system all the statistics for disabled indexes are also updated. Precision of SMALLDATETIME – A 1 Minute Precision The precision of the datatype SMALLDATETIME is 1 minute. It discards the seconds by rounding up or rounding down any seconds greater than zero. 2011 Getting Columns Headers without Result Data – SET FMTONLY ON SET FMTONLY ON returns only metadata to the client. It can be used to test the format of the response without actually running the query. When this setting is ON the resultset only have headers of the results but no data. Copy Database from Instance to Another Instance – Copy Paste in SQL Server SQL Server has a feature which copy database from one database to another database and it can be automated as well using SSIS. Make sure you have SQL Server Agent Turned on as this feature will create a job. Puzzle – SELECT * vs SELECT COUNT(*) If you have ever wondered SELECT * gives error when executed alone but SELECT COUNT(*) does not. Why? in that case, you should read this blog post. Creating All New Database with Full Recovery Model This blog post is very based on very interesting story where the user wants to do something by default for every single new database created. Model database is a secret weapon which should be used very carefully and with proper evalution. If used carefully this can be a very much beneficiary when we need a newly created database behave in certain fashion. 2012 In year 2012 I had two interesting series ran on the blog. If there is no fun in learning, the learning becomes a burden. For the same reason, I had decided to build a three part quiz around SEQUENCE. The quiz was to identify the next value of the sequence. I encourage all of you to take part in this fun quiz. Guess the Next Value – Puzzle 1 Guess the Next Value – Puzzle 2 Guess the Next Value – Puzzle 3 Can anyone remember their final day of schooling? This is probably a silly question because – of course you can! Many people mark this as the most exciting, happiest day of their life. It marks the end of testing, the end of following rules set by teachers, and the beginning of finally being able to earn money and work in your chosen field. Read five part series on developer training subject Developer Training - Importance and Significance - Part 1 Developer Training – Employee Morals and Ethics – Part 2 Developer Training – Difficult Questions and Alternative Perspective - Part 3 Developer Training – Various Options for Developer Training – Part 4 Developer Training – A Conclusive Summary- Part 5 Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Execution plan warnings–The final chapter

- by Dave Ballantyne

In my previous posts (here and here), I showed examples of some of the execution plan warnings that have been added to SQL Server 2012. There is one other warning that is of interest to me : “Unmatched Indexes”. Firstly, how do I know this is the final one ? The plan is an XML document, right ? So that means that it can have an accompanying XSD. As an XSD is a schema definition, we can poke around inside it to find interesting things that *could* be in the final XML file. The showplan schema is stored in the folder Microsoft SQL Server\110\Tools\Binn\schemas\sqlserver\2004\07\showplan and by comparing schemas over releases you can get a really good idea of any new functionality that has been added. Here is the section of the Sql Server 2012 showplan schema that has been interesting me so far : <xsd:complexType name="AffectingConvertWarningType"> <xsd:annotation> <xsd:documentation>Warning information for plan-affecting type conversion</xsd:documentation> </xsd:annotation> <xsd:sequence>  </xsd:sequence> <xsd:attribute name="ConvertIssue" use="required"> <xsd:simpleType> <xsd:restriction base="xsd:string"> <xsd:enumeration value="Cardinality Estimate" /> <xsd:enumeration value="Seek Plan" />  </xsd:restriction> </xsd:simpleType> </xsd:attribute> <xsd:attribute name="Expression" type ="xsd:string" use="required" /></xsd:complexType><xsd:complexType name="WarningsType"> <xsd:annotation> <xsd:documentation>List of all possible iterator or query specific warnings (e.g. hash spilling, no join predicate)</xsd:documentation> </xsd:annotation> <xsd:choice minOccurs="1" maxOccurs="unbounded"> <xsd:element name="ColumnsWithNoStatistics" type="shp:ColumnReferenceListType" minOccurs="0" maxOccurs="1" /> <xsd:element name="SpillToTempDb" type="shp:SpillToTempDbType" minOccurs="0" maxOccurs="unbounded" /> <xsd:element name="Wait" type="shp:WaitWarningType" minOccurs="0" maxOccurs="unbounded" /> <xsd:element name="PlanAffectingConvert" type="shp:AffectingConvertWarningType" minOccurs="0" maxOccurs="unbounded" /> </xsd:choice> <xsd:attribute name="NoJoinPredicate" type="xsd:boolean" use="optional" /> <xsd:attribute name="SpatialGuess" type="xsd:boolean" use="optional" /> <xsd:attribute name="UnmatchedIndexes" type="xsd:boolean" use="optional" /> <xsd:attribute name="FullUpdateForOnlineIndexBuild" type="xsd:boolean" use="optional" /></xsd:complexType> I especially like the “to be extended here” comment, high hopes that we will see more of these in the future. So “Unmatched Indexes” was a warning that I couldn’t get and many thanks must go to Fabiano Amorim (b|t) for showing me the way. Filtered indexes were introduced in Sql Server 2008 and are really useful if you only need to index only a portion of the data within a table. However, if your SQL code uses a variable as a predicate on the filtered data that matches the filtered condition, then the filtered index cannot be used as, naturally, the value in the variable may ( and probably will ) change and therefore will need to read data outside the index. As an aside, you could use option(recompile) here , in which case the optimizer will build a plan specific to the variable values and use the filtered index, but that can bring about other problems. To demonstrate this warning, we need to generate some test data : DROP TABLE #TestTab1GOCREATE TABLE #TestTab1 (Col1 Int not null, Col2 Char(7500) not null, Quantity Int not null)GOINSERT INTO #TestTab1 VALUES (1,1,1),(1,2,5),(1,2,10),(1,3,20), (2,1,101),(2,2,105),(2,2,110),(2,3,120)GO and then add a filtered index CREATE INDEX ixFilter ON #TestTab1 (Col1)WHERE Quantity = 122 Now if we execute SELECT COUNT(*) FROM #TestTab1 WHERE Quantity = 122 We will see the filtered index being scanned But if we parameterize the query DECLARE @i INT = 122SELECT COUNT(*) FROM #TestTab1 WHERE Quantity = @i The plan is very different a table scan, as the value of the variable used in the predicate can change at run time, and also we see the familiar warning triangle. If we now look at the properties pane, we will see two pieces of information “Warnings” and “UnmatchedIndexes”. So, handily, we are being told which filtered index is not being used due to parameterization.

Read the article

Added splash screen code to my package

- by Youssef

Please i need support to added splash screen code to my package /* * T24_Transformer_FormView.java */ package t24_transformer_form; import org.jdesktop.application.Action; import org.jdesktop.application.ResourceMap; import org.jdesktop.application.SingleFrameApplication; import org.jdesktop.application.FrameView; import org.jdesktop.application.TaskMonitor; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import javax.swing.filechooser.FileNameExtensionFilter; import javax.swing.filechooser.FileFilter; // old T24 Transformer imports import java.io.File; import java.io.FileWriter; import java.io.StringWriter; import java.text.SimpleDateFormat; import java.util.ArrayList; import java.util.Date; import java.util.HashMap; import java.util.Iterator; //import java.util.Properties; import java.util.StringTokenizer; import javax.swing.; import javax.xml.parsers.DocumentBuilder; import javax.xml.parsers.DocumentBuilderFactory; import javax.xml.transform.Result; import javax.xml.transform.Source; import javax.xml.transform.Transformer; import javax.xml.transform.TransformerFactory; import javax.xml.transform.dom.DOMSource; import javax.xml.transform.stream.StreamResult; import org.apache.log4j.Logger; import org.apache.log4j.PropertyConfigurator; import org.w3c.dom.Document; import org.w3c.dom.DocumentFragment; import org.w3c.dom.Element; import org.w3c.dom.Node; import org.w3c.dom.NodeList; import com.ejada.alinma.edh.xsdtransform.util.ConfigKeys; import com.ejada.alinma.edh.xsdtransform.util.XSDElement; import com.sun.org.apache.xml.internal.serialize.OutputFormat; import com.sun.org.apache.xml.internal.serialize.XMLSerializer; /* * The application's main frame. */ public class T24_Transformer_FormView extends FrameView { /**} * static holders for application-level utilities * { */ //private static Properties appProps; private static Logger appLogger; /** * */ private StringBuffer columnsCSV = null; private ArrayList<String> singleValueTableColumns = null; private HashMap<String, String> multiValueTablesSQL = null; private HashMap<Object, HashMap<String, Object>> groupAttrs = null; private ArrayList<XSDElement> xsdElementsList = null; /** * initialization */ private void init() /*throws Exception*/ { // init the properties object //FileReader in = new FileReader(appConfigPropsPath); //appProps.load(in); // log4j.properties constant String PROP_LOG4J_CONFIG_FILE = "log4j.properties"; // init the logger if ((PROP_LOG4J_CONFIG_FILE != null) && (!PROP_LOG4J_CONFIG_FILE.equals(""))) { PropertyConfigurator.configure(PROP_LOG4J_CONFIG_FILE); if (appLogger == null) { appLogger = Logger.getLogger(T24_Transformer_FormView.class.getName()); } appLogger.info("Application initialization successful."); } columnsCSV = new StringBuffer(ConfigKeys.FIELD_TAG + "," + ConfigKeys.FIELD_NUMBER + "," + ConfigKeys.FIELD_DATA_TYPE + "," + ConfigKeys.FIELD_FMT + "," + ConfigKeys.FIELD_LEN + "," + ConfigKeys.FIELD_INPUT_LEN + "," + ConfigKeys.FIELD_GROUP_NUMBER + "," + ConfigKeys.FIELD_MV_GROUP_NUMBER + "," + ConfigKeys.FIELD_SHORT_NAME + "," + ConfigKeys.FIELD_NAME + "," + ConfigKeys.FIELD_COLUMN_NAME + "," + ConfigKeys.FIELD_GROUP_NAME + "," + ConfigKeys.FIELD_MV_GROUP_NAME + "," + ConfigKeys.FIELD_JUSTIFICATION + "," + ConfigKeys.FIELD_TYPE + "," + ConfigKeys.FIELD_SINGLE_OR_MULTI + System.getProperty("line.separator")); singleValueTableColumns = new ArrayList<String>(); singleValueTableColumns.add(ConfigKeys.COLUMN_XPK_ROW + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_NUMERIC); multiValueTablesSQL = new HashMap<String, String>(); groupAttrs = new HashMap<Object, HashMap<String, Object>>(); xsdElementsList = new ArrayList<XSDElement>(); } /** * initialize the <code>DocumentBuilder</code> and read the XSD file * * @param docPath * @return the <code>Document</code> object representing the read XSD file */ private Document retrieveDoc(String docPath) { Document xsdDoc = null; File file = new File(docPath); try { DocumentBuilder builder = DocumentBuilderFactory.newInstance().newDocumentBuilder(); xsdDoc = builder.parse(file); } catch (Exception e) { appLogger.error(e.getMessage()); } return xsdDoc; } /** * perform the iteration/modification on the document * iterate to the level which contains all the elements (Single-Value, and Groups) and start processing each * * @param xsdDoc * @return */ private Document processDoc(Document xsdDoc) { ArrayList<Object> newElementsList = new ArrayList<Object>(); HashMap<String, Object> docAttrMap = new HashMap<String, Object>(); Element sequenceElement = null; Element schemaElement = null; // get document's root element NodeList nodes = xsdDoc.getChildNodes(); for (int i = 0; i < nodes.getLength(); i++) { if (ConfigKeys.TAG_SCHEMA.equals(nodes.item(i).getNodeName())) { schemaElement = (Element) nodes.item(i); break; } } // process the document (change single-value elements, collect list of new elements to be added) for (int i1 = 0; i1 < schemaElement.getChildNodes().getLength(); i1++) { Node childLevel1 = (Node) schemaElement.getChildNodes().item(i1); // <ComplexType> element if (childLevel1.getNodeName().equals(ConfigKeys.TAG_COMPLEX_TYPE)) { // first, get the main attributes and put it in the csv file for (int i6 = 0; i6 < childLevel1.getChildNodes().getLength(); i6++) { Node child6 = childLevel1.getChildNodes().item(i6); if (ConfigKeys.TAG_ATTRIBUTE.equals(child6.getNodeName())) { if (child6.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { String attrName = child6.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).getNodeValue(); if (((Element) child6).getElementsByTagName(ConfigKeys.TAG_SIMPLE_TYPE).getLength() != 0) { Node simpleTypeElement = ((Element) child6).getElementsByTagName(ConfigKeys.TAG_SIMPLE_TYPE) .item(0); if (((Element) simpleTypeElement).getElementsByTagName(ConfigKeys.TAG_RESTRICTION).getLength() != 0) { Node restrictionElement = ((Element) simpleTypeElement).getElementsByTagName( ConfigKeys.TAG_RESTRICTION).item(0); if (((Element) restrictionElement).getElementsByTagName(ConfigKeys.TAG_MAX_LENGTH).getLength() != 0) { Node maxLengthElement = ((Element) restrictionElement).getElementsByTagName( ConfigKeys.TAG_MAX_LENGTH).item(0); HashMap<String, String> elementProperties = new HashMap<String, String>(); elementProperties.put(ConfigKeys.FIELD_TAG, attrName); elementProperties.put(ConfigKeys.FIELD_NUMBER, "0"); elementProperties.put(ConfigKeys.FIELD_DATA_TYPE, ConfigKeys.DATA_TYPE_XSD_STRING); elementProperties.put(ConfigKeys.FIELD_FMT, ""); elementProperties.put(ConfigKeys.FIELD_NAME, attrName); elementProperties.put(ConfigKeys.FIELD_SHORT_NAME, attrName); elementProperties.put(ConfigKeys.FIELD_COLUMN_NAME, attrName); elementProperties.put(ConfigKeys.FIELD_SINGLE_OR_MULTI, "S"); elementProperties.put(ConfigKeys.FIELD_LEN, maxLengthElement.getAttributes().getNamedItem( ConfigKeys.ATTR_VALUE).getNodeValue()); elementProperties.put(ConfigKeys.FIELD_INPUT_LEN, maxLengthElement.getAttributes() .getNamedItem(ConfigKeys.ATTR_VALUE).getNodeValue()); constructElementRow(elementProperties); // add the attribute as a column in the single-value table singleValueTableColumns.add(attrName + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_STRING + ConfigKeys.DELIMITER_COLUMN_TYPE + maxLengthElement.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE).getNodeValue()); // add the attribute as an element in the elements list addToElementsList(attrName, attrName); appLogger.debug("added attribute: " + attrName); } } } } } } // now, loop on the elements and process them for (int i2 = 0; i2 < childLevel1.getChildNodes().getLength(); i2++) { Node childLevel2 = (Node) childLevel1.getChildNodes().item(i2); // <Sequence> element if (childLevel2.getNodeName().equals(ConfigKeys.TAG_SEQUENCE)) { sequenceElement = (Element) childLevel2; for (int i3 = 0; i3 < childLevel2.getChildNodes().getLength(); i3++) { Node childLevel3 = (Node) childLevel2.getChildNodes().item(i3); // <Element> element if (childLevel3.getNodeName().equals(ConfigKeys.TAG_ELEMENT)) { // check if single element or group if (isGroup(childLevel3)) { processGroup(childLevel3, true, null, null, docAttrMap, xsdDoc, newElementsList); // insert a new comment node with the contents of the group tag sequenceElement.insertBefore(xsdDoc.createComment(serialize(childLevel3)), childLevel3); // remove the group tag sequenceElement.removeChild(childLevel3); } else { processElement(childLevel3); } } } } } } } // add new elements // this step should be after finishing processing the whole document. when you add new elements to the document // while you are working on it, those new elements will be included in the processing. We don't need that! for (int i = 0; i < newElementsList.size(); i++) { sequenceElement.appendChild((Element) newElementsList.get(i)); } // write the new required attributes to the schema element Iterator<String> attrIter = docAttrMap.keySet().iterator(); while(attrIter.hasNext()) { Element attr = (Element) docAttrMap.get(attrIter.next()); Element newAttrElement = xsdDoc.createElement(ConfigKeys.TAG_ATTRIBUTE); appLogger.debug("appending attr. [" + attr.getAttribute(ConfigKeys.ATTR_NAME) + "]..."); newAttrElement.setAttribute(ConfigKeys.ATTR_NAME, attr.getAttribute(ConfigKeys.ATTR_NAME)); newAttrElement.setAttribute(ConfigKeys.ATTR_TYPE, attr.getAttribute(ConfigKeys.ATTR_TYPE)); schemaElement.appendChild(newAttrElement); } return xsdDoc; } /** * add a new <code>XSDElement</code> with the given <code>name</code> and <code>businessName</code> to * the elements list * * @param name * @param businessName */ private void addToElementsList(String name, String businessName) { xsdElementsList.add(new XSDElement(name, businessName)); } /** * add the given <code>XSDElement</code> to the elements list * * @param element */ private void addToElementsList(XSDElement element) { xsdElementsList.add(element); } /** * check if the <code>element</code> sent is single-value element or group * element. the comparison depends on the children of the element. if found one of type * <code>ComplexType</code> then it's a group element, and if of type * <code>SimpleType</code> then it's a single-value element * * @param element * @return <code>true</code> if the element is a group element, * <code>false</code> otherwise */ private boolean isGroup(Node element) { for (int i = 0; i < element.getChildNodes().getLength(); i++) { Node child = (Node) element.getChildNodes().item(i); if (child.getNodeName().equals(ConfigKeys.TAG_COMPLEX_TYPE)) { // found a ComplexType child (Group element) return true; } else if (child.getNodeName().equals(ConfigKeys.TAG_SIMPLE_TYPE)) { // found a SimpleType child (Single-Value element) return false; } } return false; /* String attrName = null; if (element.getAttributes() != null) { Node attribute = element.getAttributes().getNamedItem(XSDTransformer.ATTR_NAME); if (attribute != null) { attrName = attribute.getNodeValue(); } } if (attrName.startsWith("g")) { // group element return true; } else { // single element return false; } */ } /** * process a group element. recursively, process groups till no more group elements are found * * @param element * @param isFirstLevelGroup * @param attrMap * @param docAttrMap * @param xsdDoc * @param newElementsList */ private void processGroup(Node element, boolean isFirstLevelGroup, Node parentGroup, XSDElement parentGroupElement, HashMap<String, Object> docAttrMap, Document xsdDoc, ArrayList<Object> newElementsList) { String elementName = null; HashMap<String, Object> groupAttrMap = new HashMap<String, Object>(); HashMap<String, Object> parentGroupAttrMap = new HashMap<String, Object>(); XSDElement groupElement = null; if (element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { elementName = element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).getNodeValue(); } appLogger.debug("processing group [" + elementName + "]..."); groupElement = new XSDElement(elementName, elementName); // get the attributes if a non-first-level-group // attributes are: groups's own attributes + parent group's attributes if (!isFirstLevelGroup) { // get the current element (group) attributes for (int i1 = 0; i1 < element.getChildNodes().getLength(); i1++) { if (ConfigKeys.TAG_COMPLEX_TYPE.equals(element.getChildNodes().item(i1).getNodeName())) { Node complexTypeNode = element.getChildNodes().item(i1); for (int i2 = 0; i2 < complexTypeNode.getChildNodes().getLength(); i2++) { if (ConfigKeys.TAG_ATTRIBUTE.equals(complexTypeNode.getChildNodes().item(i2).getNodeName())) { appLogger.debug("add group attr: " + ((Element) complexTypeNode.getChildNodes().item(i2)).getAttribute(ConfigKeys.ATTR_NAME)); groupAttrMap.put(((Element) complexTypeNode.getChildNodes().item(i2)).getAttribute(ConfigKeys.ATTR_NAME), complexTypeNode.getChildNodes().item(i2)); docAttrMap.put(((Element) complexTypeNode.getChildNodes().item(i2)).getAttribute(ConfigKeys.ATTR_NAME), complexTypeNode.getChildNodes().item(i2)); } } } } // now, get the parent's attributes parentGroupAttrMap = groupAttrs.get(parentGroup); if (parentGroupAttrMap != null) { Iterator<String> iter = parentGroupAttrMap.keySet().iterator(); while (iter.hasNext()) { String attrName = iter.next(); groupAttrMap.put(attrName, parentGroupAttrMap.get(attrName)); } } // add the attributes to the group element that will be added to the elements list Iterator<String> itr = groupAttrMap.keySet().iterator(); while(itr.hasNext()) { groupElement.addAttribute(itr.next()); } // put the attributes in the attributes map groupAttrs.put(element, groupAttrMap); } for (int i = 0; i < element.getChildNodes().getLength(); i++) { Node childLevel1 = (Node) element.getChildNodes().item(i); if (childLevel1.getNodeName().equals(ConfigKeys.TAG_COMPLEX_TYPE)) { for (int j = 0; j < childLevel1.getChildNodes().getLength(); j++) { Node childLevel2 = (Node) childLevel1.getChildNodes().item(j); if (childLevel2.getNodeName().equals(ConfigKeys.TAG_SEQUENCE)) { for (int k = 0; k < childLevel2.getChildNodes().getLength(); k++) { Node childLevel3 = (Node) childLevel2.getChildNodes().item(k); if (childLevel3.getNodeName().equals(ConfigKeys.TAG_ELEMENT)) { // check if single element or group if (isGroup(childLevel3)) { // another group element.. // unfortunately, a recursion is // needed here!!! :-( processGroup(childLevel3, false, element, groupElement, docAttrMap, xsdDoc, newElementsList); } else { // reached a single-value element.. copy it under the // main sequence and apply the name<>shorname replacement processGroupElement(childLevel3, element, groupElement, isFirstLevelGroup, xsdDoc, newElementsList); } } } } } } } if (isFirstLevelGroup) { addToElementsList(groupElement); } else { parentGroupElement.addChild(groupElement); } appLogger.debug("finished processing group [" + elementName + "]."); } /** * process the sent <code>element</code> to extract/modify required * information: * 1. replace the <code>name</code> attribute with the <code>shortname</code>. * * @param element */ private void processElement(Node element) { String fieldShortName = null; String fieldColumnName = null; String fieldDataType = null; String fieldFormat = null; String fieldInputLength = null; String elementName = null; HashMap<String, String> elementProperties = new HashMap<String, String>(); if (element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { elementName = element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).getNodeValue(); } appLogger.debug("processing element [" + elementName + "]..."); for (int i = 0; i < element.getChildNodes().getLength(); i++) { Node childLevel1 = (Node) element.getChildNodes().item(i); if (childLevel1.getNodeName().equals(ConfigKeys.TAG_ANNOTATION)) { for (int j = 0; j < childLevel1.getChildNodes().getLength(); j++) { Node childLevel2 = (Node) childLevel1.getChildNodes().item(j); if (childLevel2.getNodeName().equals(ConfigKeys.TAG_APP_INFO)) { for (int k = 0; k < childLevel2.getChildNodes().getLength(); k++) { Node childLevel3 = (Node) childLevel2.getChildNodes().item(k); if (childLevel3.getNodeName().equals(ConfigKeys.TAG_HAS_PROPERTY)) { if (childLevel3.getAttributes() != null) { String attrName = null; Node attribute = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME); if (attribute != null) { attrName = attribute.getNodeValue(); elementProperties.put(attrName, childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue()); if (attrName.equals(ConfigKeys.FIELD_SHORT_NAME)) { fieldShortName = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_COLUMN_NAME)) { fieldColumnName = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_DATA_TYPE)) { fieldDataType = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_FMT)) { fieldFormat = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_INPUT_LEN)) { fieldInputLength = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } } } } } } } } } // replace the name attribute with the shortname if (element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).setNodeValue(fieldShortName); } elementProperties.put(ConfigKeys.FIELD_SINGLE_OR_MULTI, "S"); constructElementRow(elementProperties); singleValueTableColumns.add(fieldShortName + ConfigKeys.DELIMITER_COLUMN_TYPE + fieldDataType + fieldFormat + ConfigKeys.DELIMITER_COLUMN_TYPE + fieldInputLength); // add the element to elements list addToElementsList(fieldShortName, fieldColumnName); appLogger.debug("finished processing element [" + elementName + "]."); } /** * process the sent <code>element</code> to extract/modify required * information: * 1. copy the element under the main sequence * 2. replace the <code>name</code> attribute with the <code>shortname</code>. * 3. add the attributes of the parent groups (if non-first-level-group) * * @param element */ private void processGroupElement(Node element, Node parentGroup, XSDElement parentGroupElement, boolean isFirstLevelGroup, Document xsdDoc, ArrayList<Object> newElementsList) { String fieldShortName = null; String fieldColumnName = null; String fieldDataType = null; String fieldFormat = null; String fieldInputLength = null; String elementName = null; Element newElement = null; HashMap<String, String> elementProperties = new HashMap<String, String>(); ArrayList<String> tableColumns = new ArrayList<String>(); HashMap<String, Object> groupAttrMap = null; if (element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { elementName = element.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).getNodeValue(); } appLogger.debug("processing element [" + elementName + "]..."); // 1. copy the element newElement = (Element) element.cloneNode(true); newElement.setAttribute(ConfigKeys.ATTR_MAX_OCCURS, "unbounded"); // 2. if non-first-level-group, replace the element's SimpleType tag with a ComplexType tag if (!isFirstLevelGroup) { if (((Element) newElement).getElementsByTagName(ConfigKeys.TAG_SIMPLE_TYPE).getLength() != 0) { // there should be only one tag of SimpleType Node simpleTypeNode = ((Element) newElement).getElementsByTagName(ConfigKeys.TAG_SIMPLE_TYPE).item(0); // create the new ComplexType element Element complexTypeNode = xsdDoc.createElement(ConfigKeys.TAG_COMPLEX_TYPE); complexTypeNode.setAttribute(ConfigKeys.ATTR_MIXED, "true"); // get the list of attributes for the parent group groupAttrMap = groupAttrs.get(parentGroup); Iterator<String> attrIter = groupAttrMap.keySet().iterator(); while(attrIter.hasNext()) { Element attr = (Element) groupAttrMap.get(attrIter.next()); Element newAttrElement = xsdDoc.createElement(ConfigKeys.TAG_ATTRIBUTE); appLogger.debug("adding attr. [" + attr.getAttribute(ConfigKeys.ATTR_NAME) + "]..."); newAttrElement.setAttribute(ConfigKeys.ATTR_REF, attr.getAttribute(ConfigKeys.ATTR_NAME)); newAttrElement.setAttribute(ConfigKeys.ATTR_USE, "optional"); complexTypeNode.appendChild(newAttrElement); } // replace the old SimpleType node with the new ComplexType node newElement.replaceChild(complexTypeNode, simpleTypeNode); } } // 3. replace the name with the shortname in the new element for (int i = 0; i < newElement.getChildNodes().getLength(); i++) { Node childLevel1 = (Node) newElement.getChildNodes().item(i); if (childLevel1.getNodeName().equals(ConfigKeys.TAG_ANNOTATION)) { for (int j = 0; j < childLevel1.getChildNodes().getLength(); j++) { Node childLevel2 = (Node) childLevel1.getChildNodes().item(j); if (childLevel2.getNodeName().equals(ConfigKeys.TAG_APP_INFO)) { for (int k = 0; k < childLevel2.getChildNodes().getLength(); k++) { Node childLevel3 = (Node) childLevel2.getChildNodes().item(k); if (childLevel3.getNodeName().equals(ConfigKeys.TAG_HAS_PROPERTY)) { if (childLevel3.getAttributes() != null) { String attrName = null; Node attribute = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME); if (attribute != null) { attrName = attribute.getNodeValue(); elementProperties.put(attrName, childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue()); if (attrName.equals(ConfigKeys.FIELD_SHORT_NAME)) { fieldShortName = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_COLUMN_NAME)) { fieldColumnName = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_DATA_TYPE)) { fieldDataType = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_FMT)) { fieldFormat = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } else if (attrName.equals(ConfigKeys.FIELD_INPUT_LEN)) { fieldInputLength = childLevel3.getAttributes().getNamedItem(ConfigKeys.ATTR_VALUE) .getNodeValue(); } } } } } } } } } if (newElement.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME) != null) { newElement.getAttributes().getNamedItem(ConfigKeys.ATTR_NAME).setNodeValue(fieldShortName); } // 4. save the new element to be added to the sequence list newElementsList.add(newElement); elementProperties.put(ConfigKeys.FIELD_SINGLE_OR_MULTI, "M"); constructElementRow(elementProperties); // create the MULTI-VALUE table // 0. Primary Key tableColumns.add(ConfigKeys.COLUMN_XPK_ROW + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_STRING + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.COLUMN_XPK_ROW_LENGTH); // 1. foreign key tableColumns.add(ConfigKeys.COLUMN_FK_ROW + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_NUMERIC); // 2. field value tableColumns.add(fieldShortName + ConfigKeys.DELIMITER_COLUMN_TYPE + fieldDataType + fieldFormat + ConfigKeys.DELIMITER_COLUMN_TYPE + fieldInputLength); // 3. attributes if (groupAttrMap != null) { Iterator<String> attrIter = groupAttrMap.keySet().iterator(); while (attrIter.hasNext()) { Element attr = (Element) groupAttrMap.get(attrIter.next()); tableColumns.add(attr.getAttribute(ConfigKeys.ATTR_NAME) + ConfigKeys.DELIMITER_COLUMN_TYPE + ConfigKeys.DATA_TYPE_XSD_NUMERIC); } } multiValueTablesSQL.put(sub_table_prefix.getText() + fieldShortName, constructMultiValueTableSQL( sub_table_prefix.getText() + fieldShortName, tableColumns)); // add the element to it's parent group children parentGroupElement.addChild(new XSDElement(fieldShortName, fieldColumnName)); appLogger.debug("finished processing element [" + elementName + "]."); } /** * write resulted files * * @param xsdDoc * @param docPath */ private void writeResults(Document xsdDoc, String resultsDir, String newXSDFileName, String csvFileName) { String rsDir = resultsDir + File.separator + new SimpleDateFormat("yyyyMMdd-HHmm").format(new Date()); try { File resultsDirFile = new File(rsDir); if (!resultsDirFile.exists()) { resultsDirFile.mkdirs(); } // write the XSD doc appLogger.info("writing the transformed XSD..."); Source source = new DOMSource(xsdDoc); Result result = new StreamResult(rsDir + File.separator + newXSDFileName); Transformer xformer = TransformerFactory.newInstance().newTransformer(); // xformer.setOutputProperty("indent", "yes"); xformer.transform(source, result); appLogger.info("finished writing the transformed XSD."); // write the CSV columns file appLogger.info("writing the CSV file..."); FileWriter csvWriter = new FileWriter(rsDir + File.separator + csvFileName); csvWriter.write(columnsCSV.toString()); csvWriter.close(); appLogger.info("finished writing the CSV file."); // write the master single-value table appLogger.info("writing the creation script for master table (single-values)..."); FileWriter masterTableWriter = new FileWriter(rsDir + File.separator + main_edh_table_name.getText() + ".sql"); masterTableWriter.write(constructSingleValueTableSQL(main_edh_table_name.getText(), singleValueTableColumns)); masterTableWriter.close(); appLogger.info("finished writing the creation script for master table (single-values)."); // write the multi-value tables sql appLogger.info("writing the creation script for slave tables (multi-values)..."); Iterator<String> iter = multiValueTablesSQL.keySet().iterator(); while (iter.hasNext()) { String tableName = iter.next(); String sql = multiValueTablesSQL.get(tableName); FileWriter tableSQLWriter = new FileWriter(rsDir + File.separator + tableName + ".sql"); tableSQLWriter.write(sql); tableSQLWriter.close(); } appLogger.info("finished writing the creation script for slave tables (multi-values)."); // write the single-value view appLogger.info("writing the creation script for single-value selection view..."); FileWriter singleValueViewWriter = new FileWriter(rsDir + File.separator + view_name_single.getText() + ".sql"); singleValueViewWriter.write(constructViewSQL(ConfigKeys.SQL_VIEW_SINGLE)); singleValueViewWriter.close(); appLogger.info("finished writing the creation script for single-value selection view."); // debug for (int i = 0; i < xsdElementsList.size(); i++) { getMultiView(xsdElementsList.get(i)); /*// if (xsdElementsList.get(i).getAllDescendants() != null) { // for (int j = 0; j < xsdElementsList.get(i).getAllDescendants().size(); j++) { // appLogger.debug(main_edh_table_name.getText() + "." + ConfigKeys.COLUMN_XPK_ROW // + "=" + xsdElementsList.get(i).getAllDescendants().get(j).getName() + "." + ConfigKeys.COLUMN_FK_ROW); // } // } */ } } catch (Exception e) { appLogger.error(e.getMessage()); } } private String getMultiView(XSDElement element)

Read the article

Working with Analytic Workflow Manager (AWM) - Part 8 Cube Metadata Analysis

- by Mohan Ramanuja

CUBE SIZEselect dbal.owner||'.'||substr(dbal.table_name,4) awname, sum(dbas.bytes)/1024/1024 as mb, dbas.tablespace_name from dba_lobs dbal, dba_segments dbas where dbal.column_name = 'AWLOB' and dbal.segment_name = dbas.segment_name group by dbal.owner, dbal.table_name, dbas.tablespace_name order by dbal.owner, dbal.table_name SESSION RESOURCES select vses.username||':'||vsst.sid username, vstt.name, max(vsst.value) valuefrom v$sesstat vsst, v$statname vstt, v$session vseswhere vstt.statistic# = vsst.statistic# and vsst.sid = vses.sid andVSES.USERNAME LIKE ('ATTRIBDW_OWN') ANDvstt.name in ('session pga memory', 'session pga memory max', 'session uga memory','session uga memory max', 'session cursor cache count', 'session cursor cache hits', 'session stored procedure space', 'opened cursors current', 'opened cursors cumulative') andvses.username is not null group by vsst.sid, vses.username, vstt.name order by vsst.sid, vses.username, vstt.name OLAP PGA USE select 'OLAP Pages Occupying: '|| round((((select sum(nvl(pool_size,1)) from v$aw_calc)) / (select value from v$pgastat where name = 'total PGA inuse')),2)*100||'%' info from dual union select 'Total PGA Inuse Size: '||value/1024||' KB' info from v$pgastat where name = 'total PGA inuse' union select 'Total OLAP Page Size: '|| round(sum(nvl(pool_size,1))/1024,0)||' KB' info from v$aw_calc order by info desc OLAP PGA USAGE PER USER select vs.username, vs.sid, round(pga_used_mem/1024/1024,2)||' MB' pga_used, round(pga_max_mem/1024/1024,2)||' MB' pga_max, round(pool_size/1024/1024,2)||' MB' olap_pp, round(100*(pool_hits-pool_misses)/pool_hits,2) || '%' olap_ratio from v$process vp, v$session vs, v$aw_calc va where session_id=vs.sid and addr = paddr CUBE LOADING SCRIPT REM The 'set define off' statement is needed only if running this script through SQLPlus.REM If you are using another tool to run this script, the line below may be commented out.set define offBEGIN DBMS_CUBE.BUILD( 'VALIDATE ATTRIBDW_OWN.CURRENCY USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNT USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.DATEDIM USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.CUSIP USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNTRETURN', 'CCCCC', -- refresh methodfalse, -- refresh after errors 0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/BEGIN DBMS_CUBE.BUILD( ' ATTRIBDW_OWN.CURRENCY USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNT USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.DATEDIM USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.CUSIP USING ( LOAD NO SYNCH, COMPILE SORT ), ATTRIBDW_OWN.ACCOUNTRETURN', 'CCCCC', -- refresh methodfalse, -- refresh after errors 0, -- parallelismtrue, -- atomic refreshtrue, -- automatic orderfalse); -- add dimensionsEND;/ VISUALIZATION OBJECT - AW$ATTRIBDW_OWN CREATE TABLE "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN" ( "PS#" NUMBER(10,0), "GEN#" NUMBER(10,0), "EXTNUM" NUMBER(8,0), "AWLOB" BLOB, "OBJNAME" VARCHAR2(256 BYTE), "PARTNAME" VARCHAR2(256 BYTE) ) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE ( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "AWLOB" ) STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) PARTITION BY RANGE ( "GEN#" ) SUBPARTITION BY HASH ( "PS#", "EXTNUM" ) SUBPARTITIONS 8 ( PARTITION "PTN1" VALUES LESS THAN (1) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE READS LOGGING NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP661" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP662" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP663" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP664" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP665" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP666" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP667" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP668" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" ) , PARTITION "PTNN" VALUES LESS THAN (MAXVALUE) PCTFREE 10 PCTUSED 40 INITRANS 4 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOB ("AWLOB") STORE AS SECUREFILE ( TABLESPACE "ATTRIBDW_DATA" DISABLE STORAGE IN ROW CHUNK 8192 RETENTION MIN 1 CACHE NOCOMPRESS KEEP_DUPLICATES STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT)) ( SUBPARTITION "SYS_SUBP669" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP670" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP671" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP672" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP673" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP674" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP675" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_SUBP676" LOB ("AWLOB") STORE AS ( TABLESPACE "ATTRIBDW_DATA" ) TABLESPACE "ATTRIBDW_DATA" ) ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."ATTRIBDW_OWN_I$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN" ( "PS#", "GEN#", "EXTNUM" ) PCTFREE 10 INITRANS 4 MAXTRANS 255 COMPUTE STATISTICS STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000406980C00004$$" ON "ATTRIBDW_OWN"."AW$ATTRIBDW_OWN" ( PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" LOCAL (PARTITION "SYS_IL_P711" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP695" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP696" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP697" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP698" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP699" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP700" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP701" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP702" TABLESPACE "ATTRIBDW_DATA" ) , PARTITION "SYS_IL_P712" PCTFREE 10 INITRANS 1 MAXTRANS 255 STORAGE( BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ( SUBPARTITION "SYS_IL_SUBP703" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP704" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP705" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP706" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP707" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP708" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP709" TABLESPACE "ATTRIBDW_DATA" , SUBPARTITION "SYS_IL_SUBP710" TABLESPACE "ATTRIBDW_DATA" ) ) PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE BUILD LOG CREATE TABLE "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( "BUILD_ID" NUMBER, "SLAVE_NUMBER" NUMBER, "STATUS" VARCHAR2(10 BYTE), "COMMAND" VARCHAR2(25 BYTE), "BUILD_OBJECT" VARCHAR2(30 BYTE), "BUILD_OBJECT_TYPE" VARCHAR2(10 BYTE), "OUTPUT" CLOB, "AW" VARCHAR2(30 BYTE), "OWNER" VARCHAR2(30 BYTE), "PARTITION" VARCHAR2(50 BYTE), "SCHEDULER_JOB" VARCHAR2(100 BYTE), "TIME" TIMESTAMP (6)WITH TIME ZONE, "BUILD_SCRIPT" CLOB, "BUILD_TYPE" VARCHAR2(22 BYTE), "COMMAND_DEPTH" NUMBER(2,0), "BUILD_SUB_OBJECT" VARCHAR2(30 BYTE), "REFRESH_METHOD" VARCHAR2(1 BYTE), "SEQ_NUMBER" NUMBER, "COMMAND_NUMBER" NUMBER, "IN_BRANCH" NUMBER(1,0), "COMMAND_STATUS_NUMBER" NUMBER, "BUILD_NAME" VARCHAR2(100 BYTE) ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "OUTPUT" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) LOB ( "BUILD_SCRIPT" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00013$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407294C00007$$" ON "ATTRIBDW_OWN"."CUBE_BUILD_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE DIMENSION COMPILE CREATE TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE" ( "ID" NUMBER, "SEQ_NUMBER" NUMBER, "ERROR#" NUMBER(8,0) NOT NULL ENABLE, "ERROR_MESSAGE" VARCHAR2(2000 BYTE), "DIMENSION" VARCHAR2(100 BYTE), "DIMENSION_MEMBER" VARCHAR2(100 BYTE), "MEMBER_ANCESTOR" VARCHAR2(100 BYTE), "HIERARCHY1" VARCHAR2(100 BYTE), "HIERARCHY2" VARCHAR2(100 BYTE), "ERROR_CONTEXT" CLOB ) SEGMENT CREATION DEFERRED PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING TABLESPACE "ATTRIBDW_DATA" LOB ( "ERROR_CONTEXT" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ID"IS 'Current operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."SEQ_NUMBER"IS 'Cube build log sequence number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR#"IS 'Error number being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_MESSAGE"IS 'Error text being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION"IS 'Name of dimension being compiled'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."DIMENSION_MEMBER"IS 'Problem dimension member'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."MEMBER_ANCESTOR"IS 'Problem dimension member''s parent'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY1"IS 'First hierarchy involved in error'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."HIERARCHY2"IS 'Second hierarchy involved in error'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"."ERROR_CONTEXT"IS 'Extra information for error'; COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE"IS 'Cube dimension compile log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407307C00010$$" ON "ATTRIBDW_OWN"."CUBE_DIMENSION_COMPILE" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE( INITIAL 1048576 NEXT 1048576 MAXEXTENTS 2147483645) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE OPERATING LOG CREATE TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG" ( "INST_ID" NUMBER NOT NULL ENABLE, "SID" NUMBER NOT NULL ENABLE, "SERIAL#" NUMBER NOT NULL ENABLE, "USER#" NUMBER NOT NULL ENABLE, "SQL_ID" VARCHAR2(13 BYTE), "JOB" NUMBER, "ID" NUMBER, "PARENT_ID" NUMBER, "SEQ_NUMBER" NUMBER, "TIME" TIMESTAMP (6)WITH TIME ZONE NOT NULL ENABLE, "LOG_LEVEL" NUMBER(4,0) NOT NULL ENABLE, "DEPTH" NUMBER(4,0), "OPERATION" VARCHAR2(15 BYTE) NOT NULL ENABLE, "SUBOPERATION" VARCHAR2(20 BYTE), "STATUS" VARCHAR2(10 BYTE) NOT NULL ENABLE, "NAME" VARCHAR2(20 BYTE) NOT NULL ENABLE, "VALUE" VARCHAR2(4000 BYTE), "DETAILS" CLOB ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "DETAILS" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."INST_ID"IS 'Instance ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SID"IS 'Session ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SERIAL#"IS 'Session serial#'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."USER#"IS 'User ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SQL_ID"IS 'Executing SQL statement ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."JOB"IS 'Identifier of job'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."ID"IS 'Current operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."PARENT_ID"IS 'Parent operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SEQ_NUMBER"IS 'Cube build log sequence number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."TIME"IS 'Time of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."LOG_LEVEL"IS 'Verbosity level of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DEPTH"IS 'Nesting depth of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."OPERATION"IS 'Current operation'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."SUBOPERATION"IS 'Current suboperation'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."STATUS"IS 'Status of current operation'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."NAME"IS 'Name of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."VALUE"IS 'Value of record'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"."DETAILS"IS 'Extra information for record'; COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG"IS 'Cube operations log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407301C00018$$" ON "ATTRIBDW_OWN"."CUBE_OPERATIONS_LOG" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ; CUBE REJECTED RECORDS CREATE TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS" ( "ID" NUMBER, "SEQ_NUMBER" NUMBER, "ERROR#" NUMBER(8,0) NOT NULL ENABLE, "ERROR_MESSAGE" VARCHAR2(2000 BYTE), "RECORD#" NUMBER(38,0), "SOURCE_ROW" ROWID, "REJECTED_RECORD" CLOB ) SEGMENT CREATION IMMEDIATE PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING STORAGE ( INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT ) TABLESPACE "ATTRIBDW_DATA" LOB ( "REJECTED_RECORD" ) STORE AS BASICFILE ( TABLESPACE "ATTRIBDW_DATA" ENABLE STORAGE IN ROW CHUNK 8192 RETENTION NOCACHE LOGGING STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) ) ;COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ID"IS 'Current operation ID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SEQ_NUMBER"IS 'Cube build log sequence number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR#"IS 'Error number being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."ERROR_MESSAGE"IS 'Error text being reported'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."RECORD#"IS 'Rejected record number'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."SOURCE_ROW"IS 'Rejected record''s ROWID'; COMMENT ON COLUMN "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"."REJECTED_RECORD"IS 'Rejected record copy'; COMMENT ON TABLE "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS"IS 'Cube rejected records log';CREATE UNIQUE INDEX "ATTRIBDW_OWN"."SYS_IL0000407304C00007$$" ON "ATTRIBDW_OWN"."CUBE_REJECTED_RECORDS" ( PCTFREE 10 INITRANS 2 MAXTRANS 255 STORAGE(INITIAL 1048576 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645 PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT FLASH_CACHE DEFAULT CELL_FLASH_CACHE DEFAULT) TABLESPACE "ATTRIBDW_DATA" PARALLEL (DEGREE 0 INSTANCES 0) ;

Read the article

OpenVPN - Ubuntu 10.04 - Client Can't Connect to Server - Linux Route Add Command Failed

- by nicorellius

I suppose this could be asked on Server Fault as well, but it is specific to the client so I thought I'd start here. I have keys for access to an OpenVPN server already in place. I have used these keys to connect already, but using a Windows XP machine. On a Ubuntu machine, I installed OpenVPN and then configured client.conf file so that I could run: sudo openvpn --config client.conf And it seems correct but I still can't connect and get these errors and lines of output: Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 /sbin/route add -net 10.8.0.1 netmask 255.255.255.255 gw 10.8.0.17 SIOCADDRT: File exists Mon May 31 14:34:57 2010 ERROR: Linux route add command failed: external program exited with error status: 7 Mon May 31 14:34:57 2010 Initialization Sequence Completed I searched the net for forums and ideas and tried some file moving and renaming but still ended up in the same place.

Read the article

How to adjust and combine multiple lower quality photos into one better using FOSS?

- by Vi

I have multiple noisy photos (caputed without tripod) that needs to be adjusted (moved/rotated) and averaged. How it's better to do it in Linux with FOSS console-based programs? Current way is something like: mplayer mf://*.JPG -vo yuv4mpeg:file=qqq.yuv transcode -i qqq.yuv -y null -J stabilize=maxshift=500:fieldsize=100:fieldnum=6:stepsize=50:shakiness=10 transcode -i qqq.yuv -J transform=smoothing=100000:sharpen=0:optzoom=0 -y raw -o www.yuv mplayer www.yuv -vo pnm gm convert -average 0*.ppm q.ppm i.e.: Convert photos to video Apply Transcode's "Stabilize" filter Convert the video back to images Average the images. It works, but bad: photos still not perfectly adjusted and the whole sequence is very slow. What is better way of doing it?

Read the article

Unable to resolve FQDN, hostname works

- by HannesFostie

We are having an issue where computers who are not part of the domain cannot resolve the FQDN of a server (but regular hostname and ip do resolve). The strange thing is that this does work when the computer is added to the network. Our domain name is rather long, its something along the lines of "team.dept.company.com", could that be it? DHCP server passes along the proper DNS, Name and WINS servers, as well as the domain name. I thought that should've solved the problem, but apparently not really. Our domain is still windows2003 EDIT: I am starting to believe I can narrow this down to a problem either with the vmware tools NIC drivers that are embedded in my winPE boot image, or to the fact that I'm trying to do this from inside a VM. Pinging a FQDN at the same time when using a different task sequence on a physical machine works.

Read the article

Debian 3.1 (Sarge) init.d boot order

- by Adam Lewis

I am using a TS-7800 single board computer from Technologic Systems that ships with Debian 3.1 (Sarge). I have updated it to Squeeze, but due to various driver issues I have been forced to roll back to Sarge. I am attempting to configure the various drivers and configurations needed for my application services before they start. Ideally I would call one init.d script that contains the drivers / configurations then call the other init.d scripts (one for each process). I am left scratching my head on how to guarantee the boot sequence. I know in later versions of Debian I could use the lbs-header to achieve this; but is there anything comparable to the LBS header in Sarge?

Read the article

Debian 3.1 (Sarge) init.d boot order

- by Adam Lewis

I am using a TS-7800 single board computer from Technologic Systems that ships with Debian 3.1 (Sarge). I have updated it to Squeeze, but due to various driver issues I have been forced to roll back to Sarge. I am attempting to configure the various drivers and configurations needed for my application services before they start. Ideally I would call one init.d script that contains the drivers / configurations then call the other init.d scripts (one for each process). I am left scratching my head on how to guarantee the boot sequence. I know in later versions of Debian I could use the lbs-header to achieve this; but is there anything comparable to the LBS header in Sarge?

Search Results

Search found 2761 results on 111 pages for 'sequence generators'.

Page 60/111 | < Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67 | Next Page >

- by doo

- by Ricardo Peres

- by Rick Strahl

- by Bob Rhubart

- by coderkane

- by matnagel

- by meder

- by catsy

- by pitosalas

- by Jakob Ehn

- by Pinal Dave

- by Lukasz Kurylo

- by user3237134

- by user3237134

- by Dan Cowell

- by Samir R. Bhogayta

- by Pinal Dave

- by Dave Ballantyne

- by Youssef

- by Mohan Ramanuja

- by nicorellius

- by Vi

- by HannesFostie

- by Adam Lewis

- by Adam Lewis

< Previous Page | 56 57 58 59 60 61 62 63 64 65 66 67 | Next Page >