code coverage - Page 610

difference between Casini [IIS express] and VS Development server or Expression web

- by anirudha

MVC3 project can be run within Expression web and Visual studio as opened like a website not a project. they work same even if you open blogengine.net project in VS they take a time when you have more theme but expression web debug them in a second. well because theme design not matter for code. Expression web is a good because they save time for compile the code. even changes we make a little in design nothing in backend code. i found a little difference between Casini and VS development server that if image putted in wrong way like <img src=”//img.png”/> instead of <img src=”/img.png”/> the error we make // instead of / that’s not worked in Expression web or Visual studio debugging but in Cassini it’s work fine. Well i found that debug Blogengine.net in Expression web is a great thing because in VS they take a time like a minute to debug when you trying to debug first time. Expression Web save a time when we design themes within them and that’s much good option because web is also maked for design. Well if you want to debug application faster then use casini but Expression web debugging is a good option when they take a long time to debug in Visual studio and EW debug them in a seconds.

Read the article

int vs size_t on 64bit

- by MK

Porting code from 32bit to 64bit. Lots of places with int len = strlen(pstr); These all generate warnings now because strlen() returns size_t which is 64bit and int is still 32bit. So I've been replacing them with size_t len = strlen(pstr); But I just realized that this is not safe, as size_t is unsigned and it can be treated as signed by the code (I actually ran into one case where it caused a problem, thank you, unit tests!). Blindly casting strlen return to (int) feels dirty. Or maybe it shouldn't? So the question is: is there an elegant solution for this? I probably have a thousand lines of code like that in the codebase; I can't manually check each one of them and the test coverage is currently somewhere between 0.01 and 0.001%.

Read the article

Reflecting on 2010 and Looking into 2011

- by Sam Abraham

In early 2010, I had blogged and shared my excitement as I was about to embark on a new journey relocating to South Florida. As I settled down and adjusted to my new life, I was presented with an opportunity to get actively involved and volunteer in the local Florida .Net and Project Management communities. I have since devoted a significant portion of my time to community initiatives, coordinating the West Palm Beach .Net User Group, volunteering as a member of the INETA Speaker’s Bureau and traveling to attend/speak at .Net code camps and user groups throughout the states of Florida and New York. I have also taken on various volunteer roles at the South Florida Chapter of the Project Management Institute starting as core team member on the chapter’s mentoring initiative and ending the year as Project Manager of the chapter’s mentoring program and as Director of Electronic Communications on the chapter’s IT team. I am also serving a one year term (2010-2011) as secretary and founding board member of Florida’s first official chapter of the International Association for Software Architects (IASA). A big thank you is due for those who afforded me the opportunity and privilege to take part of these initiatives and those who provided guidance and encouragement when I needed them the most. Looking ahead into 2011, I hope to continue my community involvement and volunteer activities. I will start by dedicating the first 5 weekends in the New Year to teach a free comprehensive Microsoft PowerPoint class at church. My goal will be to start from scratch and slowly cover the various available PowerPoint features that can be leveraged to create captivating presentations. Starting February, I will be resuming my user group/code camp speaking engagements at our South Florida .Net Code Camp and the West Palm Beach .Net User Group. I look forward to continuing to meet, chat and share with our technical community members and to another active year in community service. All the best, --Sam Abraham

Read the article

Hallmarks of a Professional PHP Programmer

- by Scotty C.

I'm a 19 year old student who really REALLY enjoys programming, and I'm hoping to glean from your years of experience here. At present, I'm studying PHP every chance I get, and have been for about 3 years, although I've never taken any formal classes. I'd love to some day be a programmer full time, and make a good career of it. My question to you is this: What do you consider to be the hallmarks or traits of a professional programmer? Mainly in the field of PHP, but other, more generalized qualifications are also more than welcome, as I think PHP is more of a hobbyist language and may not be the language of choice in the eyes of potential employers. Please correct me if I'm wrong. Above all, I don't want to wast time on something that isn't worth while. I'm currently feeling pretty confident in my knowledge of PHP as a language, and I know that I could build just about anything I need and have it "work", but I feel sorely lacking in design concepts and code structure. I can even write object oriented code, but in my personal opinion, that isn't worth a hill of beans if it isn't organized well. For this reason, I bought Matt Zandstra's book "PHP Objects, Patterns, and Practice" and have been reading that a little every day. Anyway, I'm starting to digress a little here, so back to the original question. What advice would you give to an aspiring programmer who wants to make an impact in this field? Also, on a side note, I've been working on a project with a friend of mine that would give a fairly good idea of where I'm at coding wise. I'm gonna give a link, I don't want anyone to feel as though I'm pushing or spamming here, so don't click it if you don't want to. But if you are interested on giving some feedback there as well, you can see the code on github. I'm known as The Craw there. https://github.com/PureChat/PureChat--Beta-/tree/

Read the article

Is it customary to write Java domain objects / data transfer objects with public member variables on mobile platforms?

- by Sean Mickey

We performed a code review recently of mobile application Java code that was developed by an outside contractor and noticed that all of the domain objects / data transfer objects are written in this style: public class Category { public String name; public int id; public String description; public int parentId; } public class EmergencyContact { public long id; public RelationshipType relationshipType; public String medicalProviderType; public Contact contact; public String otherPhone; public String notes; public PersonName personName; } Of course, these members are then accessed directly everywhere else in the code. When we asked about this, the developers told us that this is a customary performance enhancement design pattern that is used on mobile platforms, because mobile devices are resource-limited environments. It doesn't seem to make sense; accessing private members via public getters/setters doesn't seem like it could add much overhead. And the added benefits of encapsulation seem to outweigh the benefits of this coding style. Is this generally true? Is this something that is normally done on mobile platforms for the reasons given above? All feedback welcome and appreciated -

Read the article

OpenGL: glGetError() returns invalid enum after call to glewInit()

- by malymato

I use GLEW and freeglut. For some reason, after a call to glewInit(), glGetError() returns error code 1280. Reinstalling the drivers didn't help. I tried to disable glewExperimental, it had no effect. Code worked before, but I am not aware of any changes I could possibly make. Here's my code: int main(int argc, char* argv[]) { GLenum GlewInitResult, res; InitWindow(argc, argv); res = glGetError(); // res = 0 glewExperimental = GL_TRUE; GlewInitResult = glewInit(); res = glGetError(); // res = 1280 glutMainLoop(); exit(EXIT_SUCCESS); } void InitWindow(int argc, char* argv[]) { glutInit(&argc, argv); glutInitContextVersion(4, 0); glutInitContextFlags(GLUT_FORWARD_COMPATIBLE); glutInitContextProfile(GLUT_CORE_PROFILE); glutSetOption(GLUT_ACTION_ON_WINDOW_CLOSE, GLUT_ACTION_GLUTMAINLOOP_RETURNS); glutInitWindowPosition(0, 0); glutInitWindowSize(CurrentWidth, CurrentHeight); glutInitDisplayMode(GLUT_DEPTH | GLUT_DOUBLE | GLUT_RGBA); WindowHandle = glutCreateWindow(WINDOW_TITLE); GLenum errorCheckValue = glGetError(); if (WindowHandle < 1) { fprintf(stderr, "ERROR: Could not create new rendering window.\n"); exit(EXIT_FAILURE); } glutReshapeFunc(ResizeFunction); glutDisplayFunc(RenderFunction); glutIdleFunc(IdleFunction); glutTimerFunc(0, TimerFunction, 0); glutCloseFunc(Cleanup); glutKeyboardFunc(KeyboardFunction); } Could someone tell me what I am doing wrong? Thanks.

Read the article

How to run the pixel shader effcet??

- by Yashwinder

Below stated is the code for my pixel shader which I am rendering after the vertex shader. I have set the wordViewProjection matrix in my program but I don't know to set the progress variable i.e in my pixel shader file which will make the image displayed by the help of a quad to give out transition effect. Here is the code for my pixel shader program::: As my pixel shader is giving a static effect and now I want to use it to give some effect. So for this I have to add a progress variable in my pixel shader and initialize to the Constant table function i.e constantTable.SetValue(D3DDevice,"progress",progress ); I am having the problem in using this function for progress in my program. Anybody know how to set this variable in my program. And my new pixel Shader code is float progress : register(C0); sampler2D implicitInput : register(s0); sampler2D oldInput : register(s1); struct VS_OUTPUT { float4 Position : POSITION; float4 Color : COLOR0; float2 UV : TEXCOORD 0; }; float4 Blinds(float2 uv) { if(frac(uv.y * 5) < progress) { return tex2D(implicitInput, uv); } else { return tex2D(oldInput, uv); } } // Pixel Shader { return Blinds(input.UV); }

Read the article

Rendering Text with the HTML5 Canvas

- by dwahlin

In a previous post I walked through the fundamentals of rendering shapes such as squares and circles using the HTML5 Canvas API. In this post I’ll provide a simple example of rendering and rotating text. To render text you can use the fillText() or strokeText() functions which take the text to render as well as the x and y coordinates of where to render it. To rotate text you can use the transform functions available with the HTML5 Canvas such as save(), rotate(), and restore(). To run the live demos that follow click the Result tab in the blue bar of each demo. Rendering Text This example provides a simple look at how text can be rendered using the HTML5 Canvas. It iterates through a loop, updates the text and font size dynamically, measures the width of the text using the measureText() function, and then calls fillText() to render the text with the desired font size to the screen. Here’s what the code above renders: Rotating Text This example shows how text can be rendered and even rotated by using transform functions built into the HTML5 Canvas. The code starts by rendering text the standard way using fillText(). It then saves the state of the canvas performs an x,y coordinate transform (moves to 100, 300 respectively) and then rotates the canvas –90 degrees using the rotate() function. After the text is rendered, the canvas is reverted back to it’s existing state (saved by calling the save() function) by calling the restore() function. An additional line of text is then rendered. Here’s what the code above renders: If you’re interested in learning more about the HTML5 Canvas and how it can be used in your Web or Windows 8 applications, check out my HTML5 Canvas Fundamentals course from Pluralsight.

Read the article

Function-Local Static Const variable Initialization semantics.

- by Hassan Syed

The questions are in bold, for those that cannot be bothered reading a question in depth. This is a followup to this question. It is to do with the initialization semantics of static variables in functions. Static variables should be initialized once, and their internal state might be altered later - as I (currently) do in the linked question. However, the code in question does not require the feature to change the state of the variable later. Let me clarrify my position, since I don't require the string object's internal state to change. The code is for a trait class for meta programming, and as such would would benifit from a const char * const ptr -- thus Ideally a local cost static const variable is needed. My educated guess is that in this case the string in question will be optimally placed in memory by the link-loader, and that the code is more secure and maps to the intended semantics. This leads to the semantics of such a variable "The C++ Programming language Third Edition -- Stroustrup" does not have anything (that I could find) to say about this matter. All that is said is that the variable is initialized once when the flow of control of the thread first reaches the code. This leads me to ponder if the following code would be sensible, and if not what are the intended semantics ?. #include <iostream> const char * const GetString(const char * x_in) { static const char * const x = x_in; return x; } int main() { const char * const temp = GetString("yahoo"); std::cout << temp << std::endl; const char * const temp2 = GetString("yahoo2"); std::cout << temp2 << std::endl; } The following compiles on GCC and prints "yahoo" twice. Which is what I want -- However it might not be standards compliant (which is why I post this question). It might be more elegant to have two functions, "SetString" and "String" where the latter forwards to the first. If it is standards compliant does someone know of a templates implementation in boost (or elsewhere) ?

Read the article

Delphi LoadLibrary Failing to find DLL other directory - any good options?

- by Chris Thornton

Two Delphi programs need to load foo.dll, which contains some code that injects a client-auth certificate into a SOAP request. foo.dll resides in c:\fooapp\foo.dll and is normally loaded by c:\fooapp\foo.exe. That works fine. The other program needs the same functionality, but it resides in c:\program files\unwantedstepchild\sadapp.exe. Both aps load the DLL with this code: FOOLib := LoadLibrary('foo.dll'); ... If FOOLib <> 0 then begin FOOProc := GetProcAddress(FOOLib , 'xInjectCert'); FOOProc(myHttpRequest, Data, CertName); end; It works great for foo.exe, as the dll is right there. sadapp.exe fails to load the library, so FOOLib is 0, and the rest never gets called. The sadapp.exe program therefore silently fails to inject the cert, and when we test against production, it the cert is missing, do the connection fails. Obviously, we should have fully-qualified the path to the DLL. Without going into a lot of details, there were aspects of the testing that masked this problem until recently, and now it's basically too late to fix in code, as that would require a full regression test, and there isn't time for that. Since we've painted ourselves into a corner, I need to know if there are any options that I've overlooked. While we can't change the code (for this release), we CAN tweak the installer. I've found that placing c:\fooapp into the path works. As does adding a second copy of foo.dll directly into c:\program files\unwantedstepchild. c:\fooapp\foo.exe will always be running while sadapp.exe is running, so I was hoping that Windows would find it that way, but apparently not. Is there a way to tell Windows that I really want that same DLL? Maybe a manifest or something? This is the sort of "magic bullet" that I'm looking for. I know I can: Modify the windows path, probably in the installer. That's ugly. Add a second copy of the DLL, directly into the unwantedstepchild folder. Also ugly Delay the project while we code and test a proper fix. Unacceptable. Other? Thanks for any guidance, especially with "Other". I understand that this issue is not necessarily specific to Delphi. Thanks!

Read the article

GetContactList stops reporting collisions on welded bodies

- by Henrique Jung

I have some strange problem with my game which uses Box2D as physics engine and I'm out of ideas on what I can do to solve it. My game is a class assignment where I need to build a simple game where the main character moves in a 2D environment while square blocks comes from below him. Each time a collision occurs, that block is attached to the character using a weld joint, when three blocks of the same colors are together, they annihilate themselves(an effect similar to Bejeweled). I'm using a recursive function to iterate through all the attached blocks of a given block to see if there are enough blocks for them to be deleted. I'm using GetContactList function to iterate through the list of contacts to see which blocks are adjacent to each other. The results are quite disappointing, the blocks only get annihilated in few cases. After a lot of debugging, I found the issue, but I still don't know how to solve. My issue is: after some time, GetContactList STOPS returning contacts (return NULL) to blocks that were already attached for some time. I spent some time reading the Box2D manual as well as some tutorials and still didn't find any clue of what is happening. Below there's some simplified version of the code that I wrote. for(int a = 0; a < blocksList.size(); a++) { blocksList[a].BuildConnections(); } And on BuildConnections b2ContactEdge* edge = body->GetContactList(); while(edge != NULL) { if (long_check_to_see_if_there's_a_block_nearby) { // add itself to the list to be anihilated globalList.push_back(this); //if there's, call BuildConnections again on the adjacent block adjacentBody->GetUserData()->BuildConnections; } edge = edge->next; } I know that there's another issue related to circular inclusions, but I fairly sure that this problem isn't causing the problem with the collisions. You can download my entire code from this page if you'd like http://code.google.com/p/fellz/source/list

Read the article

Whats the greatest most impressive programing feat you ever witnessed? [closed]

- by David Reis

Everyone knows of the old adage that the best programmers can be orders of magnitude better than the average. I've personally seen good code and programmers, but never something so absurd. So the questions is, what is the most impressive feat of programming you ever witnessed or heard of? You can define impressive by: The scope of the task at hand e.g. John single handedly developed the framework for his company, a work comparable in scope to what the other 200 employed were doing combined. Speed e.g. Stu programmed an entire real time multi-tasking app OS on an weekened including its own C compiler and shell command line tools Complexity e.g. Jane rearchitected our entire 10 millon LOC app to work in a cluster of servers. And she did it in an afternoon. Quality e.g. Charles's code had a rate of defects per LOC 100 times lesser than the company average. Furthermore he code was clean and understandable by all. Obviously, the more of these characteristics combined, and the more extreme each of them, the more impressive is the feat. So, let me have it. What's the most absurd feat you can recount? Please provide as much detail as possible and try to avoid urban legends or exaggerations. Post only what you can actually vouch for. Bonus questions: Was the herculean task a one-of, or did the individual regularly amazed people? How do you explain such impressive performance? How was the programmer recognized for such awesome work?

Read the article

C++ and function pointers assessment: lack of inspiration

- by OlivierDofus

I've got an assessment to give to my students. It's about C++ and function pointers. Their skill is middle: it the first year of a programming school after bachelor. To give you something precise, here's a sample of a solution of one of 3 exercices they had to do in 30 minutes (the question was: "here's a version of a code that could be written with function pointers, write down the same thing but with function pointers"): typedef void (*fcPtr) (istream &); fcPtr ArrayFct [] = { Delete , Insert, Swap, Move }; void HandleCmd (const string && Cmd) { string AvalaibleCommands ("DISM"); string::size_type Pos; istringstream Flux (Cmd); char CodeOp; Flux >> CodeOp; Pos = AvalaibleCommands.find (toupper (CodeOp)); if (Pos != string::npos) { ArrayFct [Pos](Flux); } } Any idea where I could find some inspiration? Some of the students have understood the principles, even though it's very hard for them to write C++ code. I know them, I know they're clever, and I'm pretty sure they should be very good project managers. So, writing C++ code is not that important after all. Understanding is the most important part (IMHO). I'm wondering about maybe break the habits, and give half of the questions about the principle, or even better, give some sample in other language and ask them why it's better to use function pointers instead of classical programming (usually a big switch case). Any idea where I could look? Find some inspiration?

Read the article

Looking for small, open source, c# project with extensive Unit Testing

- by Gern Blandston

(I asked this question but did not receive much response. It was recommended that I ask the same question with regards to C#. ) I am a VB.NET developer with little C# experience (yes, I know I need to write more in C#), looking for small open source projects that demonstrate high unit testing coverage from which to learn. I'm looking for small projects because I don't want to have to wade through a ton of code to get a better understanding of how to apply unit testing in my own situation, in which I write mostly IT business apps used internally by my company. UPDATE: Original question that got me asking about this is here

Read the article

E.T. Phone "Home" - Hey I've discovered a leak..!

- by Martin Deh

Being a member of the WebCenter ATEAM, we are often asked to performance tune a WebCenter custom portal application or a WebCenter Spaces deployment. Most of the time, the process is pretty much the same. For example, we often use tools like httpWatch and FireBug to monitor the application, and then perform load tests using JMeter or Selenium. In addition, there are the fine tuning of the different performance based tuning parameters that are outlined in the documentation and by blogs that have been written by my fellow ATEAMers (click on the "performance" tag in this ATEAM blog). While performing the load test where the outcome produces a significant reduction in the systems resources (memory), one of the causes that plays a role in memory "leakage" is due to the implementation of the navigation menu UI. OOTB in both JDeveloper and WebCenter Spaces, there are sample (page) templates that include a "default" navigation menu. In WebCenter Spaces, this is through the SpacesNavigationModel taskflow region, and in a custom portal (i.e. pageTemplate_globe.jspx) the menu UI is contructed using standard ADF components. These sample menu UI's basically enable the underlying navigation model to visualize itself to some extent. However, due to certain limitations of these sample menu implementations (i.e. deeper sub-level of navigations items, look-n-feel, .etc), many customers have developed their own custom navigation menus using a combination of HTML, CSS and JQuery. While this is supported somewhat by the framework, it is important to know what are some of the best practices in ensuring that the navigation menu does not leak. In addition, in this blog I will point out a leak (BUG) that is in the sample templates. OK, E.T. the suspence is killing me, what is this leak? Note: for those who don't know, info on E.T. can be found here In both of the included templates, the example given for handling the navigation back to the "Home" page, will essentially provide a nice little memory leak every time the link is clicked. Let's take a look a simple example, which uses the default template in Spaces. The outlined section below is the "link", which is used to enable a user to navigation back quickly to the Group Space Home page. When you (mouse) hover over the link, the browser displays the target URL. From looking initially at the proposed URL, this is the intended destination. Note: "home" in this case is the navigation model reference (id), that enables the display of the "pretty URL". Next, notice the current URL, which is displayed in the browser. Remember, that PortalSiteHome = home. The other highlighted item adf.ctrl-state, is very important to the framework. This item is basically a persistent query parameter, which is used by the (ADF) framework to managing the current session and page instance. Without this parameter present, among other things, the browser back-button navigation will fail. In this example, the value for this parameter is currently 95K25i7dd_4. Next, through the navigation menu item, I will click on the Page2 link. Inspecting the URL again, I can see that it reports that indeed the navigation is successful and the adf.ctrl-state is also in the URL. For those that are wondering why the URL displays Page3.jspx, instead of Page2.jspx. Basically the (file) naming convention for pages created ar runtime in Spaces start at Page1, and then increment as you create additional pages. The name of the actual link (i.e. Page2) is the page "title" attribute. So the moral of the story is, unlike design time created pages, run time created pages the name of the file will 99% never match the name that appears in the link. Next, is to click on the quick link for navigating back to the Home page. Quick investigation yields that the navigation was indeed successful. In the browser's URL there is a home (pretty URL) reference, and there is also a reference to the adf.ctrl-state parameter. So what's the issue? Can you remember what the value was for the adf.ctrl-state? The current value is 3D95k25i7dd_149. However, the previous value was 95k25i7dd_4. Here is what happened. Remember when (mouse) hovering over the link produced the following target URL: http://localhost:8888/webcenter/spaces/NavigationTest/home This is great for the browser as this URL will navigate to the intended targer. However, what is missing is the adf.ctrl-state parameter. Since this parameter was not present upon navigation "within" the framework, the ADF framework produced another adf.ctrl-state (object). The previous adf.ctrl-state basically is orphaned while continuing to be alive in memory. Note: the auto-creation of the adf.ctrl state does happen initially when you invoke the Spaces application for the first time. The following is the line of code which produced the issue: <af:goLink destination="#{boilerBean.globalLogoURIInSpace} ... Here the boilerBean is responsible for returning the "string" url, which in this case is /spaces/NavigationTest/home. Unfortunately, again what is missing is adf.ctrl-state. Note: there are more than one instance of the goLinks in the sample templates. So E.T. how can I correct this? There are 2 simple fixes. For the goLink's destination, use the navigation model to return the actually "node" value, then use the goLinkPrettyUrl method to add the current adf.ctrl-state: <af:goLink destination="#{navigationContext.defaultNavigationModel.node['home'].goLinkPrettyUrl}"} ... /> Note: the node value is the [navigation model id] Using a goLink does solve the main issue. However, since the link basically does a redirect, some browsers like IE will produce a somewhat significant "flash". In a Spaces application, this may be an annoyance to the users. Another way to solve the leakage problem, and also remove the flash between navigations is to use a af:commandLink. For example, here is the code example for this scenario: <af:commandLink id="pt_cl2asf" actionListener="#{navigationContext.processAction}" action="pprnav"> <f:attribute name="node" value="#{navigationContext.defaultNavigationModel.node['home']}"/> </af:commandLink> Here, the navigation node to where home is located is delivered by way of the attribute to the commandLink. The actual navigation is performed by the processAction, which is needing the "node" value. E.T. OK, you solved the OOTB sample BUG, what about my custom navigation code? I have seen many implementations of creating a navigation menu through custom code. In addition, there are some blog sites that also give detailed examples. The majority of these implementations are very similar. The code usually involves using standard HTML tags (i.e. DIVS, UL, LI, .,etc) and either CSS or JavaScript (JQuery) to produce the flyout/drop-down effect. The navigation links in these cases are standard <a href... > tags. Although, this type of approach is not fully accepted by the ADF community, it does work. The important thing to note here is that the <a> tag value must use the goLinkPrettyURL method of contructing the target URL. For example: <a href="${contextRoot}${menu.goLinkPrettyUrl}"> The main reason why this type of approach is popular is that links that are created this way (also with using af:goLinks), the pages become crawlable by search engines. CommandLinks are currently not search friendly. However, in the case of a Spaces instance this may be acceptable. So in this use-case, af:commandLinks, which would replace the <a> (or goLink) tags. The example code given of the af:commandLink above is still valid. One last important item. If you choose to use af:commandLinks, special attention must be given to the scenario in which java script has been used to produce the flyout effect in the custom menu UI. In many cases that I have seen, the commandLink can only be invoked once, since there is a conflict between the custom java script with the ADF frameworks own scripting to control the view. The recommendation here, would be to use a pure CSS approach to acheive the dropdown effects. One very important thing to note. Due to another BUG, the WebCenter environement must be patched to BP3 (patch p14076906). Otherwise the leak is still present using the goLinkPrettyUrl method. Thanks E.T.! Now I can phone home and not worry about my application running out of resources due to my custom navigation!

Read the article

Efficient use of Bundling

- by ACShorten

One of the discussions I am having with customers and consulting people is about the use of Bundling and its appropriate use. We introduced Bundling post release in the V2.2 code line to allow partners and consultants to build solutions using the Configuration Tools objects such as UI Maps, Service Scripts, Business Objects, Business Services etc and then export and migrate them as solutions. Whilst that was the original intent I have found a few teams using the facility for other data and then complaining about the efficiency or relevance of the tool. Here are a number of guidelines to help optimize the use of Bundling for your implementation: Not all objects can be bundled. Only specific objects in the product can be bundled. These are targetted at Configuration Tools objects and a select group of other objects that are required for these objects. Maintenance Objects with the option "Eligble for Bundling" set to Y (and also contains a Bundling Add BO). Add objects to the Bundle as you complete them - Bundling can have issues with sequencing objects. The best way of combating this is to add objects to the bundle as you complete them. This will help with making sure you sequence the loading of the objects as you are building them in the correct order. Remember Bundling was designed for developers and partners to deliver solutions. If you leave adding objects to a Bundle using the Bundle Export zones then you will have less control of what sequence they are applied and this can cause timing issues. Bundling takes the latest revision - If you combine Bundling with Revision Control then the Bundling will take the latest release of the object at the time of the export operation. Bundling and Version Control products - If you use a version control tool to control your java code then you can also check in the Bundle to associate a release between code and a bundle. Bundling is quite a powerful feature of the Oracle Utilities Application Framework that allows sales, partners, consultants and customers to package and import their Configuration Tools based solutions.

Read the article

A Look Inside JSR 360 - CLDC 8

- by Roger Brinkley

If you didn't notice during JavaOne the Java Micro Edition took a major step forward in its consolidation with Java Standard Edition when JSR 360 was proposed to the JCP community. Over the last couple of years there has been a focus to move Java ME back in line with it's big brother Java SE. We see evidence of this in JCP itself which just recently merged the ME and SE/EE Executive Committees into a single Java Executive Committee. But just before that occurred JSR 360 was proposed and approved for development on October 29. So let's take a look at what changes are now being proposed. In a way JSR 360 is returning back to the original roots of Java ME when it was first introduced. It was indeed a subset of the JDK 4 language, but as Java progressed many of the language changes were not implemented in the Java ME. Back then the tradeoff was still a functionality, footprint trade off but the major market was feature phones. Today the market has changed and CLDC, while it will still target feature phones, will have it primary emphasis on embedded devices like wireless modules, smart meters, health care monitoring and other M2M devices. The major changes will come in three areas: language feature changes, library changes, and consolidating the Generic Connection Framework. There have been three Java SE versions that have been implemented since JavaME was first developed so the language feature changes can be divided into changes that came in JDK 5 and those in JDK 7, which mostly consist of the project Coin changes. There were no language changes in JDK 6 but the changes from JDK 5 are: Assertions - Assertions enable you to test your assumptions about your program. For example, if you write a method that calculates the speed of a particle, you might assert that the calculated speed is less than the speed of light. In the example code below if the interval isn't between 0 and and 1,00 the an error of "Invalid value?" would be thrown. private void setInterval(int interval) { assert interval > 0 && interval <= 1000 : "Invalid value?" } Generics - Generics add stability to your code by making more of your bugs detectable at compile time. Code that uses generics has many benefits over non-generic code with: Stronger type checks at compile time. Elimination of casts. Enabling programming to implement generic algorithms. Enhanced for Loop - the enhanced for loop allows you to iterate through a collection without having to create an Iterator or without having to calculate beginning and end conditions for a counter variable. The enhanced for loop is the easiest of the new features to immediately incorporate in your code. In this tip you will see how the enhanced for loop replaces more traditional ways of sequentially accessing elements in a collection. void processList(Vector<string> list) { for (String item : list) { ... Autoboxing/Unboxing - This facility eliminates the drudgery of manual conversion between primitive types, such as int and wrapper types, such as Integer. Hashtable<Integer, string=""> data = new Hashtable<>(); void add(int id, String value) { data.put(id, value); } Enumeration - Prior to JDK 5 enumerations were not typesafe, had no namespace, were brittle because they were compile time constants, and provided no informative print values. JDK 5 added support for enumerated types as a full-fledged class (dubbed an enum type). In addition to solving all the problems mentioned above, it allows you to add arbitrary methods and fields to an enum type, to implement arbitrary interfaces, and more. Enum types provide high-quality implementations of all the Object methods. They are Comparable and Serializable, and the serial form is designed to withstand arbitrary changes in the enum type. enum Season {WINTER, SPRING, SUMMER, FALL}; } private Season season; void setSeason(Season newSeason) { season = newSeason; } Varargs - Varargs eliminates the need for manually boxing up argument lists into an array when invoking methods that accept variable-length argument lists. The three periods after the final parameter's type indicate that the final argument may be passed as an array or as a sequence of arguments. Varargs can be used only in the final argument position. void warning(String format, String... parameters) { .. for(String p : parameters) { ...process(p);... } ... } Static Imports -The static import construct allows unqualified access to static members without inheriting from the type containing the static members. Instead, the program imports the members either individually or en masse. Once the static members have been imported, they may be used without qualification. The static import declaration is analogous to the normal import declaration. Where the normal import declaration imports classes from packages, allowing them to be used without package qualification, the static import declaration imports static members from classes, allowing them to be used without class qualification. import static data.Constants.RATIO; ... double r = Math.cos(RATIO * theta); Annotations - Annotations provide data about a program that is not part of the program itself. They have no direct effect on the operation of the code they annotate. There are a number of uses for annotations including information for the compiler, compiler-time and deployment-time processing, and run-time processing. They can be applied to a program's declarations of classes, fields, methods, and other program elements. @Deprecated public void clear(); The language changes from JDK 7 are little more familiar as they are mostly the changes from Project Coin: String in switch - Hey it only took us 18 years but the String class can be used in the expression of a switch statement. Fortunately for us it won't take that long for JavaME to adopt it. switch (arg) { case "-data": ... case "-out": ... Binary integral literals and underscores in numeric literals - Largely for readability, the integral types (byte, short, int, and long) can also be expressed using the binary number system. and any number of underscore characters (_) can appear anywhere between digits in a numerical literal. byte flags = 0b01001111; long mask = 0xfff0_ff08_4fff_0fffl; Multi-catch and more precise rethrow - A single catch block can handle more than one type of exception. In addition, the compiler performs more precise analysis of rethrown exceptions than earlier releases of Java SE. This enables you to specify more specific exception types in the throws clause of a method declaration. catch (IOException | InterruptedException ex) { logger.log(ex); throw ex; } Type Inference for Generic Instance Creation - Otherwise known as the diamond operator, the type arguments required to invoke the constructor of a generic class can be replaced with an empty set of type parameters (<>) as long as the compiler can infer the type arguments from the context. map = new Hashtable<>(); Try-with-resource statement - The try-with-resources statement is a try statement that declares one or more resources. A resource is an object that must be closed after the program is finished with it. The try-with-resources statement ensures that each resource is closed at the end of the statement. try (DataInputStream is = new DataInputStream(...)) { return is.readDouble(); } Simplified varargs method invocation - The Java compiler generates a warning at the declaration site of a varargs method or constructor with a non-reifiable varargs formal parameter. Java SE 7 introduced a compiler option -Xlint:varargs and the annotations @SafeVarargs and @SuppressWarnings({"unchecked", "varargs"}) to supress these warnings. On the library side there are new features that will be added to satisfy the language requirements above and some to improve the currently available set of APIs. The library changes include: Collections update - New Collection, List, Set and Map, Iterable and Iteratator as well as implementations including Hashtable and Vector. Most of the work is too support generics String - New StringBuilder and CharSequence as well as a Stirng formatter. The javac compiler now uses the the StringBuilder instead of String Buffer. Since StringBuilder is synchronized there is a performance increase which has necessitated the wahat String constructor works. Comparable interface - The comparable interface works with Collections, making it easier to reuse. Try with resources - Closeable and AutoCloseable Annotations - While support for Annotations is provided it will only be a compile time support. SuppressWarnings, Deprecated, Override NIO - There is a subset of NIO Buffer that have been in use on the of the graphics packages and needs to be pulled in and also support for NIO File IO subset. Platform extensibility via Service Providers (ServiceLoader) - ServiceLoader interface dos late bindings of interface to existing implementations. It helpe to package an interface and behavior of the implementation at a later point in time.Provider classes must have a zero-argument constructor so that they can be instantiated during loading. They are located and instantiated on demand and are identified via a provider-configuration file in the METAINF/services resource directory. This is a mechansim from Java SE. import com.XYZ.ServiceA; ServiceLoader<ServiceA> sl1= new ServiceLoader(ServiceA.class); Resources: META-INF/services/com.XYZ.ServiceA: ServiceAProvider1 ServiceAProvider2 ServiceAProvider3 META-INF/services/ServiceB: ServiceBProvider1 ServiceBProvider2 From JSR - I would rather use this list I think The Generic Connection Framework (GCF) was previously specified in a number of different JSRs including CLDC, MIDP, CDC 1.2, and JSR 197. JSR 360 represents a rare opportunity to consolidated and reintegrate parts that were duplicated in other specifications into a single specification, upgrade the APIs as well provide new functionality. The proposal is to specify a combined GCF specification that can be used with Java ME or Java SE and be backwards compatible with previous implementations. Because of size limitations as well as the complexity of the some features like InvokeDynamic and Unicode 6 will not be included. Additionally, any language or library changes in JDK 8 will be not be included. On the upside, with all the changes being made, backwards compatibility will still be maintained. JSR 360 is a major step forward for Java ME in terms of platform modernization, language alignment, and embedded support. If you're interested in following the progress of this JSR see the JSR's java.net project for details of the email lists, discussions groups.

Read the article

Using SPServices & jQuery to Find My Stuff from Multi-Select Person/Group Field

- by Mark Rackley

Okay… quick blog post for all you SPServices fans out there. I needed to quickly write a script that would return all the tasks currently assigned to me. I also wanted it to return any task that was assigned to a group I belong to. This can actually be done with a CAML query, so no big deal, right? The rub is that the “assigned to” field is a multi-select person or group field. As far as I know (and I actually know so little) you cannot just write a CAML query to return this information. If you can, please leave a comment below and disregard the rest of this blog post… So… what’s a hacker to do? As always, I break things down to their most simple components (I really love the KISS principle and would get it tattooed on my back if people wouldn’t think it meant “Knights In Satan’s Service”. You really gotta be an old far to get that reference). Here’s what we’re going to do: Get currently logged in user’s name as it is stored in a person field Find all the SharePoint groups the current user belongs to Retrieve a set of assigned tasks from the task list and then find those that are assigned to current user or group current user belongs to Nothing too hairy… So let’s get started Some Caveats before I continue There are some obvious performance implications with this solution as I make a total of four SPServices calls and there’s a lot of looping going on. Also, the CAML query in this blog has NOT been optimized. If you move forward with this code, tweak it so that it returns a further subset of data or you will see horrible performance if you have a few hundred entries in your task list. Add a date range to the CAML or something. Find some way to limit the results as much as possible. Lastly, if you DO have a better solution, I would like you to share. Iron sharpens iron and all… Alright, let’s really get started. Get currently logged in user’s name as it is stored in a person field First thing we need to do is understand how a person group looks when you look at the XML returned from a SharePoint Web Service call. It turns out it’s stored like any other multi select item in SharePoint which is <id>;#<value> and when you assign a person to that field the <value> equals the person’s name “Mark Rackley” in my case. This is for Windows Authentication, I would expect this to be different in FBA, but I’m not using FBA. If you want to know what it looks like with FBA you can use the code in this blog and strategically place an alert to see the value. Anyway… I need to find the name of the user who is currently logged in as it is stored in the person field. This turns out to be one SPServices call: var userName = $().SPServices.SPGetCurrentUser({ fieldName: "Title", debug: false }); As you can see, the “Title” field has the information we need. I suspect (although again, I haven’t tried) that the Title field also contains the user’s name as we need it if I was using FBA. Okay… last thing we need to do is store our users name in an array for processing later: myGroups = new Array(); myGroups.push(userName); Find all the SharePoint groups the current user belongs to Now for the groups. How are groups returned in that XML stream? Same as the person <ID>;#<Group Name>, and if it’s a mutli select it’s all returned in one big long string “<ID>;#<Group Name>;#<ID>;#<Group Name>;#<ID>;#<Group Name>;#<ID>;#<Group Name>;#<ID>;#<Group Name>”. So, how do we find all the groups the current user belongs to? This is also a simple SPServices call. Using the “GetGroupCollectionFromUser” operation we can find all the groups a user belongs to. So, let’s execute this method and store all our groups. $().SPServices({ operation: "GetGroupCollectionFromUser", userLoginName: $().SPServices.SPGetCurrentUser(), async: false, completefunc: function(xData, Status) { $(xData.responseXML).find("[nodeName=Group]").each(function() { myGroups.push($(this).attr("Name")); }); } }); So, all we did in the above code was execute the “GetGroupCollectionFromUser” operation and look for the each “Group” node (row) and store the name for each group in our array that we put the user’s name in previously (myGroups). Now we have an array that contains the current user’s name as it will appear in the person field XML and all the groups the current user belongs to. The Rest Now comes the easy part for all of you familiar with SPServices. We are going to retrieve our tasks from the Task list using “GetListItems” and look at each entry to see if it belongs to this person. If it does belong to this person we are going to store it for later processing. That code looks something like this: // get list of assigned tasks that aren't closed... *modify the CAML to perform better!* $().SPServices({ operation: "GetListItems", async: false, listName: "Tasks", CAMLViewFields: "<ViewFields>" + "<FieldRef Name='AssignedTo' />" + "<FieldRef Name='Title' />" + "<FieldRef Name='StartDate' />" + "<FieldRef Name='EndDate' />" + "<FieldRef Name='Status' />" + "</ViewFields>", CAMLQuery: "<Query><Where><And><IsNotNull><FieldRef Name='AssignedTo'/></IsNotNull><Neq><FieldRef Name='Status'/><Value Type='Text'>Completed</Value></Neq></And></Where></Query>", completefunc: function (xData, Status) { var aDataSet = new Array(); //loop through each returned Task $(xData.responseXML).find("[nodeName=z:row]").each(function() { //store the multi-select string of who task is assigned to var assignedToString = $(this).attr("ows_AssignedTo"); found = false; //loop through the persons name and all the groups they belong to for(var i=0; i<myGroups.length; i++) { //if the person's name or group exists in the assigned To string //then the task is assigned to them if (assignedToString.indexOf(myGroups[i]) >= 0){ found = true; break; } } //if the Task belongs to this person then store or display it //(I'm storing it in an array) if (found){ var thisName = $(this).attr("ows_Title"); var thisStartDate = $(this).attr("ows_StartDate"); var thisEndDate = $(this).attr("ows_EndDate"); var thisStatus = $(this).attr("ows_Status"); var aDataRow=new Array( thisName, thisStartDate, thisEndDate, thisStatus); aDataSet.push(aDataRow); } }); SomeFunctionToDisplayData(aDataSet); } }); Some notes on why I did certain things and additional caveats. You will notice in my code that I’m doing an AssignedToString.indexOf(GroupName) to see if the task belongs to the person. This could possibly return bad results if you have SharePoint Group names that are named in such a way that the “IndexOf” returns a false positive. For example if you have a Group called “My Users” and a group called “My Users – SuperUsers” then if a user belonged to “My Users” it would return a false positive on executing “My Users – SuperUsers”.IndexOf(“My Users”). Make sense? Just be aware of this when naming groups, we don’t have this problem. This is where also some fine-tuning can probably be done by those smarter than me. This is a pretty inefficient method to determine if a task belongs to a user, I mean what if a user belongs to 20 groups? That’s a LOT of looping. See all the opportunities I give you guys to do something fun?? Also, why am I storing my values in an array instead of just writing them out to a Div? Well.. I want to pass my data to a jQuery library to format it all nice and pretty and an Array is a great way to do that. When all is said and done and we put all the code together it looks like: $(document).ready(function() { var userName = $().SPServices.SPGetCurrentUser({ fieldName: "Title", debug: false }); myGroups = new Array(); myGroups.push(userName ); $().SPServices({ operation: "GetGroupCollectionFromUser", userLoginName: $().SPServices.SPGetCurrentUser(), async: false, completefunc: function(xData, Status) { $(xData.responseXML).find("[nodeName=Group]").each(function() { myGroups.push($(this).attr("Name")); }); // get list of assigned tasks that aren't closed... *modify this CAML to perform better!* $().SPServices({ operation: "GetListItems", async: false, listName: "Tasks", CAMLViewFields: "<ViewFields>" + "<FieldRef Name='AssignedTo' />" + "<FieldRef Name='Title' />" + "<FieldRef Name='StartDate' />" + "<FieldRef Name='EndDate' />" + "<FieldRef Name='Status' />" + "</ViewFields>", CAMLQuery: "<Query><Where><And><IsNotNull><FieldRef Name='AssignedTo'/></IsNotNull><Neq><FieldRef Name='Status'/><Value Type='Text'>Completed</Value></Neq></And></Where></Query>", completefunc: function (xData, Status) { var aDataSet = new Array(); //loop through each returned Task $(xData.responseXML).find("[nodeName=z:row]").each(function() { //store the multi-select string of who task is assigned to var assignedToString = $(this).attr("ows_AssignedTo"); found = false; //loop through the persons name and all the groups they belong to for(var i=0; i<myGroups.length; i++) { //if the person's name or group exists in the assigned To string //then the task is assigned to them if (assignedToString.indexOf(myGroups[i]) >= 0){ found = true; break; } } //if the Task belongs to this person then store or display it //(I'm storing it in an array) if (found){ var thisName = $(this).attr("ows_Title"); var thisStartDate = $(this).attr("ows_StartDate"); var thisEndDate = $(this).attr("ows_EndDate"); var thisStatus = $(this).attr("ows_Status"); var aDataRow=new Array( thisName, thisStartDate, thisEndDate, thisStatus); aDataSet.push(aDataRow); } }); SomeFunctionToDisplayData(aDataSet); } }); } }); }); Final Thoughts So, there you have it. Take it and run with it. Make it something cool (and tell me how you did it). Another possible way to improve performance in this scenario is to use a DVWP to display the tasks and use jQuery and the “myGroups” array from this blog post to hide all those rows that don’t belong to the current user. I haven’t tried it, but it does move some of the processing off to the server (generating the view) so it may perform better. As always, thanks for stopping by… hope you have a Merry Christmas…

Read the article

Calculating collision force with AfterCollision/NormalImpulse is unreliable when IgnoreCCD = false?

- by Michael

I'm using Farseer Physics Engine 3.3.1 in a very simple XNA 4 test game. (Note: I'm also tagging this Box2D, because Farseer is a direct port of Box2D and I will happily accept Box2D answers that solve this problem.) In this game, I'm creating two bodies. The first body is created using BodyFactory.CreateCircle and BodyType.Dynamic. This body can be moved around using the keyboard (which sets Body.LinearVelocity). The second body is created using BodyFactory.CreateRectangle and BodyType.Static. This body is static and never moves. Then I'm using this code to calculate the force of collision when the two bodies collide: staticBody.FixtureList[0].AfterCollision += new AfterCollisionEventHandler(AfterCollision); protected void AfterCollision(Fixture fixtureA, Fixture fixtureB, Contact contact) { float maxImpulse = 0f; for (int i = 0; i < contact.Manifold.PointCount; i++) maxImpulse = Math.Max(maxImpulse, contact.Manifold.Points[i].NormalImpulse); // maxImpulse should contain the force of the collision } This code works great if both of these bodies are set to IgnoreCCD=true. I can calculate the force of collision between them 100% reliably. Perfect. But here's the problem: If I set the bodies to IgnoreCCD=false, that code becomes wildly unpredictable. AfterCollision is called reliably, but for some reason the NormalImpulse is 0 about 75% of the time, so only about one in four collisions is registered. Worse still, the NormalImpulse seems to be zero for completely random reasons. The dynamic body can collide with the static body 10 times in a row in virtually exactly the same way, and only 2 or 3 of the hits will register with a NormalImpulse greater than zero. Setting IgnoreCCD=true on both bodies instantly solves the problem, but then I lose continuous physics detection. Why is this happening and how can I fix it? Here's a link to a simple XNA 4 solution that demonstrates this problem in action: http://www.mediafire.com/?a1w242q9sna54j4

Read the article

How do you cope with change in open source frameworks that you use for your projects?

- by Amy

It may be a personal quirk of mine, but I like keeping code in living projects up to date - including the libraries/frameworks that they use. Part of it is that I believe a web app is more secure if it is fully patched and up to date. Part of it is just a touch of obsessive compulsiveness on my part. Over the past seven months, we have done a major rewrite of our software. We dropped the Xaraya framework, which was slow and essentially dead as a product, and converted to Cake PHP. (We chose Cake because it gave us the chance to do a very rapid rewrite of our software, and enough of a performance boost over Xaraya to make it worth our while.) We implemented unit testing with SimpleTest, and followed all the file and database naming conventions, etc. Cake is now being updated to 2.0. And, there doesn't seem to be a viable migration path for an upgrade. The naming conventions for files have radically changed, and they dropped SimpleTest in favor of PHPUnit. This is pretty much going to force us to stay on the 1.3 branch because, unless there is some sort of conversion tool, it's not going to be possible to update Cake and then gradually improve our legacy code to reap the benefits of the new Cake framework. So, as usual, we are going to end up with an old framework in our Subversion repository and just patch it ourselves as needed. And this is what gets me every time. So many open source products don't make it easy enough to keep projects based on them up to date. When the devs start playing with a new shiny toy, a few critical patches will be done to older branches, but most of their focus is going to be on the new code base. How do you deal with radical changes in the open source projects that you use? And, if you are developing an open source product, do you keep upgrade paths in mind when you develop new versions?

Read the article

Using XSLT for messaging instead of marshalling/unmarshalling Java message objects

- by Joost van Stuijvenberg

So far I have been using either handmade or generated (e.g. JAXB) Java objects as 'carriers' for messages in message processing software such as protocol converters. This often leads to tedious programming, such as copying/converting data from one system's message object to an instance of another's system message object. And it sure brings in lots of Java code with getters and setters for each message attribute, validation code, etc. I was wondering whether it would be a good idea to convert one system's XML message into another system's format - or even convert requests into responses from the same system - using XSLT. This would mean I would no longer have to unmarshall XML streams to Java objects, copy/convert data using Java and marshall the resulting message object to another XML stream. Since each message may actually have a purpose I would 'link' the message (and the payload it contains in its properties or XML elements/attributes) to EXSLT functions. This would change my design approach from an imperative to a declarative style. Has anyone done this before and, if so, what are your experiences? Does the reduced amount of Java 'boiler plate' code weigh up to the increased complexity of (E)XSLT?

Read the article

How to get initial API right using TDD?

- by Vytautas Mackonis

This might be a rather silly question as I am at my first attempts at TDD. I loved the sense of confidence it brings and generally better structure of my code but when I started to apply it on something bigger than one-class toy examples, I ran into difficulties. Suppose, you are writing a library of sorts. You know what it has to do, you know a general way of how it is supposed to be implemented (architecture wise), but you keep "discovering" that you need to make changes to your public API as you code. Perhaps you need to transform this private method into strategy pattern (and now need to pass a mocked strategy in your tests), perhaps you misplaced a responsibility here and there and split an existing class. When you are improving upon existing code, TDD seems a really good fit, but when you are writing everything from scratch, the API you write tests for is a bit "blurry" unless you do a big design up front. What do you do when you already have 30 tests on the method that had its signature (and for that part, behavior) changed? That is a lot of tests to change once they add up.

Read the article

Java - Error Message Help

- by Brian

In the Code, mem is a of Class Memory and getMDR and getMAR ruturn ints. When I try to compile the code I get the following errors.....how can I fix this? Computer.java:25: write(int,int) in Memory cannot be applied to (int) Input.getInt(mem.write(cpu.getMDR())); ^ Computer.java:28: write(int,int) in Memory cannot be applied to (int) mem.write(cpu.getMAR()); Here is the code for Computer: class Computer{ private Cpu cpu; private Input in; private OutPut out; private Memory mem; public Computer() { Memory mem = new Memory(100); Input in = new Input(); OutPut out = new OutPut(); Cpu cpu = new Cpu(); System.out.println(in.getInt()); } public void run() { cpu.reset(); cpu.setMDR(mem.read(cpu.getMAR())); cpu.fetch2(); while (!cpu.stop()) { cpu.decode(); if (cpu.OutFlag()) OutPut.display(mem.read(cpu.getMAR())); if (cpu.InFlag()) Input.getInt(mem.write(cpu.getMDR())); if (cpu.StoreFlag()) { mem.write(cpu.getMAR()); cpu.getMDR(); } else { cpu.setMDR(mem.read(cpu.getMAR())); cpu.execute(); cpu.fetch(); cpu.setMDR(mem.read(cpu.getMAR())); cpu.fetch2(); } } } Here is the code for Memory: class Memory{ private MemEl[] memArray; private int size; public Memory(int s) {size = s; memArray = new MemEl[s]; for(int i = 0; i < s; i++) memArray[i] = new MemEl(); } public void write (int loc, int val) {if (loc >=0 && loc < size) memArray[loc].write(val); else System.out.println("Index Not in Domain"); } public int read (int loc) {return memArray[loc].read(); } public void dump() { for(int i = 0; i < size; i++) if(i%1 == 0) System.out.println(memArray[i].read()); else System.out.print(memArray[i].read()); } } Here is the code for getMAR and getMDR: public int getMAR() { return ir.getOpcode(); } public int getMDR() { return mdr.read(); }

Read the article

New partnership allows auto-transposition of client/server application to Windows Azure

- by Webgui

The economics of IT is changing rapidly, and organizations are searching to widen and secure availability of their systems and at the same time lower costs which is exactly what the cloud meant to do. Running your systems on Microsoft’s Windows Azure cloud for example would improve and secure the availability, accessibility and scalability (both up and down) of your systems and support the new IT economics. However, in order to take advantage of the cloud's promise of lower cost of ownership, the applications must be built or adjusted to work on that platform and in most cases this is not a simple task. Even existing web applications cannot always be transferred to Azure without some changes, and for client/server applications, the task is way more challenging even to the point where it seems impossible. The reason is the gaps between the client/server desktop technology and the cloud's. For that reason, most of the known methodologies to migrate existing client/server applications actually involve rewrite of the desktop systems for the cloud. A unique approach is introduced by Visual WebGui which creates a virtualization layer atop ASP.Net web server, it moves the transformed or generated .Net code to that layer, and then using a patent pending protocol it renders a user interface within a plain browser. The end result is pure .NET code that is a base code for a pure rich web application and now due to a collaboration with Microsoft Windows Azure Visual WebGui provides the shortest path from client/server to the Azure cloud by being able to handle close to 95% of the transformation to the cloud platform in an automatic way. Application Migration to Azure without migraines More information about the Instant CloudMove Azure solution here.

Read the article

How to hire support people?

- by Martin

I manage a tech support team at a mid-sized software company. We are the last line of support, so issues that we can't fix need to be escalated to the development team. When I joined the company, our team wasn't capable of much beyond using a specific set of troubleshooting steps to solve known issues and escalating anything else to the developers. It's always been a goal of mine for our team to shoulder as much of the support burden as possible without ever bothering a developer. Over the past few years, I, along with several new hires I've made, have made pretty good progress in that direction. We've coded our own troubleshooting tools which now ship with several of our products. When users have never-before-seen issues, we analyze stack traces and troubleshoot down to the code level, and if we need to submit a bug, half the time we've already identified in the code where in the code the bug is and offered a patch to fix it. Here's the problem I've always had: finding support people capable of the work I've described above is really difficult. I've hired 3 people in the past 3 years, and I've probably looked at several thousand resumes and conducted several hundred phone screens to do so. I know it's pretty well accepted that hiring good people is tough in the tech industry, but it seems that support is especially difficult -- there are clearly thousands of people walking around calling themselves support analysts, but 99%+ of them seemingly aren't capable of anything beyond reading a script. I'm curious if anyone has experience recruiting the sort of folks I'm talking about, and if you have any suggestions to share. We've tried all sorts of things -- different job titles/descriptions, using headhunters, etc. And while we've managed to hire a few good folks, it's basically taken us a year to find an appropriate candidate for each opening we've had, and I can't help but wonder if there's something we could be doing differently.

Search Results

Search found 88206 results on 3529 pages for 'code coverage'.

Page 610/3529 | < Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617 | Next Page >

- by anirudha

- by MK

- by Sam Abraham

- by Scotty C.

- by Sean Mickey

- by malymato

- by Yashwinder

- by dwahlin

- by Hassan Syed

- by Chris Thornton

- by Henrique Jung

- by David Reis

- by OlivierDofus

- by Gern Blandston

- by Martin Deh

- by ACShorten

- by Roger Brinkley

- by Mark Rackley

- by Michael

- by Amy

- by Joost van Stuijvenberg

- by Vytautas Mackonis

- by Brian

- by Webgui

- by Martin

< Previous Page | 606 607 608 609 610 611 612 613 614 615 616 617 | Next Page >