Search Results

Search found 16442 results on 658 pages for 'computer forensics'.

Page 62/658 | < Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >

• IE Behaviors in my system

  - by Dharani

  When i type some Url say www.google.com in IE (installed and tested with IE 6.0/7.0/8.0) at first attempt it does not recognize that URL when i type it second time.It goes to the page. But when i test it in other browsers like firefox ,Chrome without problem it is working. I scanned my system with Norton and Kasper sky,they do not complaint about any virus.I am using Windows XP Service pack 2. Does my system get affected with something say doubleclick virus?

  Read the article

• What hardware is at physical address 0x80000000 on powerpc New World Macintosh?

  - by tinkerer

  Open Firmware device tree gives no clue what device might decode at physical address 0x80000000 to 0x8008200 on a G4 New World Macintosh. The mmu has three adjacent Virtual=Real translations for that block. They are the only address translations reported between the top or physical dram at 20000000 and the start of the PCI bridges at f0000000. (A possible clue is that frame-buffer-addr is reported as 9c008000 by Open Firmware, and that is not in the reported translation table either). I believe the architecture has been around since about 1999.

  Read the article

• 2.5" SSD in a 3.5" desktop drive bay normal?

  - by Cory Petosky

  I'm a little out of touch with modern desktop builds, but I recently built a new machine anyway. I want to pick up a SSD for my I/O intensive apps (EverQuest 2 and Flash CS4 mostly), but I'm having trouble finding any in the 3.5" form factor. Is this expected, or do I fail at product search? And, if it is expected, do 2.5" SSDs come with an adapter to fit them in my desktop machine, or will I need to purchase one separately? And, finally, if I do need to purchase an adapter, are they pretty standard or are some better than others. General advice is most welcomed, though specific product recommendations in addition would be helpful!

  Read the article

• Looking for Mini itx capable of running Photoshop + Illustrator (cs4 or higher)

  - by drozzy

  Ok, so I want to build a small pc for my gf that she can take with her instead of the crappy laptop that she has. Overall I think the complete system should not weight more than 10 lbs. The requirements are to run at least 4 applications simultaneously, and be able to switch between them with no problems: Photoshop Illustrator Word editor Browser Should be able to handle 1920x1200 resolution. I am currently looking at LGA775 socket as I can just transfer my desktop cpu Q6600 to it. Currently deciding between DQ45EK and DG41TX, but any other suggestions are welcome. So I am thinking something along the lines of: MINI-BOX M350 Case with 90 watt psu Q6600 cpu (my desktop cpu) 2x2GB kingston ram (or similar) Video? Need external or built-in G45 on DQ45EK will do? My primary concern is whether the 90WATT is sufficient of the Q6600? Thanks

  Read the article

• Smart card driven membership and door entry system

  - by Rob G

  I'm looking at putting in a smart card driven system at my local sports club (which doesn't have oodles of money), and since they're willing to pay for hardware, and I'm willing to do the technical setup, I was wondering if anyone had any experience in setting something like this up. Writing any software needed is not the problem, I've pretty much got that covered with various open source projects out there and custom code I'll write, but it's more the hardware side I'm not too sure about and I'm looking for advice from people out there. I'm sure there are numerous complications, but on the surface it looks fairly simple. I'd basically like to enable members to swipe/touch a smart card at the door to gain entry to the club, walk up to a touch screen PC and swipe/touch a card reader there to "login" to the system I create, which will allow them to book club facilities etc. I may even want that same card to then activate things like lights or music when they enter the room they've booked. Pretty Eutopian I know, but still, we'd like to get as close as we can. As I said, the software shouldn't be a problem, and on the hardware side, so far I'm looking at: All in one touch screen PC running Windows 7 or Ubuntu USB card reader (not sure which one to buy) Smart Cards (again, never bought these before) Door/lighting hardware that could be triggered (not sure here either) If anyone has any advice on implementing something like this - especially the items I'm not sure about above, and of course anything I've missed out that's crucial, I'd be most grateful. Recommended hardware that you've used for something like this would be fantastic!

  Read the article

• How do I find the IP address of a Dlink wireless router?

  - by loopywolf

  How do I find out the IP address of a DLink Wireless router that I have plugged into my Wireless Router? I want to reach the admin page and change some settings but I dunno how

  Read the article

• How do I leverage the power of my desktop from my laptop?

  - by TheDeeno

  I have a powerful desktop, and a decent laptop. My laptop is my primary machine. When I'm home, I'd like to "tap into" the power of my desktop while using my laptop. I'm not thinking a solution like "remoting in" and actually using my desktop from my laptop. I mean sending work to the desktop when my laptop is taxed in a seamless way. Is this possible at all? How would I do it? I'll do whatever is necessary to my desktop to enable this if it's feasible. My laptop has Vista installed.

  Read the article

• Hard drive not detected after installing the Operating System

  - by Eka Anggraini

  After I failed to install SUSE Linux 10.0, I want to go back to the windows operating system again. but when I want to install windows, my hard drive is not detected, whereas in the BIOS in the detection / known. I was dizzy, his mistake about it. Where is. I was looking for, my problem is named after the Blue Screen of Death (BSOD) that is an error message from windows to prevent further damage, but with various types of error messages, one of them as I have *** STOP: 0X0000007B (0XF896A524, 0XC0000034, 0X00000000, 0X00000000) I do not know, where the system is broken. but why hard drive is not known ... at the time of going to re-install?

  Read the article

• Weird graphics behaviour while playing games

  - by Ayush Khemka

  When I play any high-end game like NFS Most Wanted or FIFA 12, I get these weird things on my graphics. While playing NFS, my car has various transparent diamonds all over its body, and while playing FIFA I get these weird black lines all over the field. My PC specs are :- AMD Athlon II X2 ASUS M4A785D-M PRO 500GB Seagate HDD 2GB DDR2 Transcend RAM 1033Mhz ATI Radeon HD4350 512MB graphics card Tell me if I need to provide anything else. Please help me. Thanks.

  Read the article

• How do you eat food while maintaining productivity? [closed]

  - by Jeremy Rudd

  This may sound a little silly, but how do you manage to eat your grub and snacks while maintaining both hands somewhat clean for typing? Messy food like sandwiches / burgers? Partially liquid lunch dishes? Neat stuff that messes your fingers like cheese slices? I somehow had the urge to invent a special food glove to insulate my clean fingers from the grub.

  Read the article

• Ask the Readers: How Do You Monitor Your Computer?

  - by Jason Fitzpatrick

  Beneath the shiny case of your computer and GUI of your operating system there’s a lot–CPU utilization, memory access, and disk space consumption to name a few things–you can keep an eye on. How do you keep an eye on resource utilization and more on your computer? Image available as wallpaper here. Whether you’re carefully managing a small pool of RAM, making sure your abundant apps don’t bog down your processor, or you just like having an intimate view of what’s going on in the guts of your computer, we want to hear all about the tools you use to do it. How and why do you monitor your computer? From disk use to case temps, any kind of monitoring is fair game. Sound off in the comments with the how and why of your monitoring arrangement and then be sure to stop back in on Friday for the What You Said roundup to see what tricks and tools your fellow readers are using to keep an eye on their hardware. HTG Explains: How Antivirus Software Works HTG Explains: Why Deleted Files Can Be Recovered and How You Can Prevent It HTG Explains: What Are the Sys Rq, Scroll Lock, and Pause/Break Keys on My Keyboard?

  Read the article

• Favorite workaround or solution ?

  - by UK

  Everyday we used to get some problems with softwares/hardware and it can be classified into different categories.Sometimes we find a solution or perfect workarounds for those problems. What is your favorite workaround that you have found ? Please don't post any Illegal Warez /Software Cracks One Answer per post.

  Read the article

• Where can I SPECIFICALLY find a place that sells TOSHIBA QOSMIO F30 videocards?

  - by Manny Irizarry

  Where can I SPECIFICALLY find a place that sells TOSHIBA QOSMIO F30 videocards? I need to replace mine for the 3rd time. Two video cards have blown out before because I had a fault, NVIDIA video card software driver installed that they had too many compliants that it was telling the fan that keeps the video card cool to stop working. I had finally discovered why my video cards were blowing out after the 3rd time. So again, please my people, where can i specifically find one?

  Read the article

• Could I replace a stock PSU fan with a more quiet one?

  - by GaryJL

  I have a cheap 450W PSU with an exhaust fan at the rear. This fan, however, is very loud. Is it a good idea to replace the stock PSU fan with a quiet fan with similar airflow? The PSU fan is hard-wired to the PCB in the PSU so I was intending on snipping the stock fan wires and sealing the loose ends with electrical tape. I would then connect the new quiet fan to the PWR_FAN socket on the motherboard. Has anyone done this before themselves? Is it a good idea in the first place? Considering if my PSU fails, it could take out a couple of other components too.

  Read the article

• building a new pc - no display, no beeps

  - by Adam

  Hi Building a new pc using this motherboard: GA-MA785GMT-UD2H and a 500W power supply (1 x 20 pin & 1 x 4 pin connectors). The CPU fan, hard drive and power supply all spin up but no display on the monitor and no beeps. Have tried: taking out all of the memory and still no beeps used a different power supply and still no display I only have the Motherboard, memory, CPU, heat sink & fan & power supply connected. Any ideas? Do I have a faulty motherboard?

  Read the article

• explanation of RAM specs, and what do I need for a Gaming rig

  - by ewok

  I am looking into upgrading my custom built PC's RAM. I use the machine mostly for gaming, but I don't really know a ton about RAM, so I wanted to ask a few questions. The research I've done tells me there is a negligible increase in speed for anything above 1600 MHz. is this true or is it worth the extra money to go higher? Other than drawing more power from the PSU, is there any real difference in performance with different voltages (1.5V vs 1.65V)? most of the kits I've found in the 2x4 1600 range have a CAS latency of 9 and timing of 9-9-9-24. For a significant increase in price (usually about 1.5x), I can get either 8 or 7 and lower timing. Is it worth the cost? What I am looking for here is someone to give a good explanation of what the different specs represent, and how that relates to the performance of the machine. Specifically, I'm looking for what specs I need to focus on for a good gaming rig. I am NOT looking for a "buy this, it's the best RAM" without an explanation of why. The information will be much more valuable as it will allow me to make my own informed decision. As they say, give a man a fish, he'll eat for a day. teach a man to fish, and he'll eat for the rest of his life.

  Read the article

• Weird RAM Upgrade Experience

  - by Axel Isouard

  I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

  Read the article

• How long until the chirping stops or what can I do to make it stop?

  - by MadBurn

  I know computers, I have been fixing them and building them for over a decade... but I don't know the exact electronics of them. My personal desktop PC is making an irregular, but constant, extremely high pitched chirping noise. I know this could be my hard drive, but I've heard that noise before and I believe this is a capacitor or part of the electronics. This noise is right at the edge of my hearing and I can feel it more than I can hear it. After a while, it starts to give me a headache and makes me physically sick. How long will this last? Is there anything I can do to fix it (short of replacing the entire motherboard)?

  Read the article

• wireless LANS and CSMA/CA

  - by Zia ur Rahman

  how CSMA/CA works in wireless LANS, i need a detailed discussion, please answer here or suggest a sight.

  Read the article

• Updating ATI HD 5970 Graphics card - version errors?

  - by user55406

  I'm having an issue...My system specs is: Intel i7 960 6GM Corair XMS RAM ATI HD5970 graphics card Intel dx58so motherboard Cooler Master HAF 922 case 1.5TB Seagate hard drive Windows Vista x86 (32-bit). Here is my issue: when I go to AMD/ATI website to update my graphics card - it doesn't. when I type DxDiag and then click on display it tell me my version is 8.17.0 and its on 10.10.0 for the latest version. How can I get 8.17.0 too 10.10.0? I figure it would have done that after I updated the driver for my graphics card. Thanks.

  Read the article

• Hp pavilion dv7 power button

  - by Danny B

  My power button is non responsive I am getting LED for charging. I've taken it apart before to change the dc jack and it was fine and a few months later it just powered off. I try to power back on and is goes to start up then shuts off. I just took it apart and came to find the ribbon cable connecting the power button/speakers cover is barely hanging on do I have to replace the whole thing or is there a way to replace the ribbon cable?

  Read the article

• How to choose between Mac Laptop and Desktop

  - by Sakamoto Kazuma

  I am looking at getting a Mac soon for both iPhone development, and video editing. Should I be looking at a desktop or MacBook? I do not plan for the machine to move from my desk at home, so portability is not an issue, however it will be next to both a windows 7 desktop as well as a Linux laptop with dock. Main things that I'm concerned about is whether or not a MacBook has the power needed to do the video editing that I'm planning on doing and whether or not I can afford a desktop.

  Read the article

• Should I buy this particular MacMini?

  - by sil3nt

  Hello there, I'm not certain if this is the forum I should post this in but here goes anyway. So, I'm honestly clueless when it comes to mac's and I've never owned one before, in fact I still don't own anything with "i" in front of it (not a pc fan, but just low on cash you see:) and I was wondering if these specs are adequate? it's a MacMini G4 1.42Ghz, 1GB ram, 80Gb HDD, 32mb gfx The reason I'm looking for a mac is to start out in some iphone development, and I want a system that wont hang. would this particular system be suitable?. I just need it to be usable and not lag.

  Read the article

• PC will POST whenever feels likes it

  - by kyrpas

  I'm really sick of my PC and I'd love to throw it off the 5th floor but unfortunately I don't have this luxury right now. The issues started when I moved to a new house about 2 months ago. I didn't have this problem before. Case: Arctic Cooling Silentium T1 with embedded Fusion 550 Eco 80 PSU. M/B: ASRock A790GMH/128M Gfx: ATI Radeon HD 5770 Here's what's happening almost on a daily basis: I wake up in the morning, switch on the PC and all the fans start spinning. 9/10 the graphics fan stays on 100% and I know it won't post. If I'm lucky, ATI's fan stays on full power for a second, then goes back to normal and I get a normal post but that doesn't happen often. No, instead it's just drives me crazy. When I get no POST I'm trying a lot of different things and what bothers me the most is that they all work. But not always. No... That way I could find out what the hell is going on and we don't want that.. right? So, sometimes it manages to POST if I: remove the keyboard remove the power cable for a few minutes remove the graphics card remove the HDD cables do nothing, just turn it on and off a few times Sometimes it doesn't POST even if I do all of the above. And I end up removing all power cables from the M/B, and connecting all the stuff one by one. Sometimes it works, sometimes it doesn't and I just have to pray and wait. What the hell is that? I'm getting pissed of again just thinking about it. The only solution is to leave it on 24/7 but I don't want to do that. It should be able to turn on and off when I press the power button. I'm not asking much. I'm starting to think there's some weird electricity/power issue but I really don't understand what it is. There's no logical explanation about it. At least I can't find one. Any ideas?

  Read the article

• new PC not work with existing router, but works fine when directly connecting to cable modem

  - by user34786

  I bought a new desktop PC (eMachine ET1331G-03W from WalMart) with windows 7 installed, but I can not access internet by connecting to my existing wireless router(LinkSys BEFW11S4) with wired cable. Though all other existing desktops and laptops have no problem connecting to the same router. However, the new desktop PC works fine and able to connect to internet if I bypass the router and directly hook up with the cable modem. At new PC when connecting to the router, I got the below information by typing ipconfig, the IP address looks wrong to me: autoconfiguration IPv4 Address: 169.254.71.140 subnet mask: 255.255.0.0 default gateway: (empty) NetBIOS over Tcpip: Enabled Typing ipconfig at all other desktop and laptop have values like below, which are good to me: Connection-specific DNS Suffix . : IP Address. . . . . . . . . . . . : 192.168.1.140 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 The wireless router was on 192.168.1.1, I do not know why the new desktop got 169.254.71.140 IP? It should have something like 192.168.1.xxx, and it was configured to automatically get IP by DHCP. I have tried to switch cables,power off cable modem, router and reboot new pc many times and got no luck. So I believe this is only an issue related to router or new pc configuration. Can someone help me figure out the issue?

  Read the article

< Previous Page | 58 59 60 61 62 63 64 65 66 67 68 69  | Next Page >