Search Results

Search found 2101 results on 85 pages for 'nvidia geforce'.

Page 64/85 | < Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >

• Boots to terminal

  - by Core Xii

  I had a system running 10.04, I think. I upgraded it to 11.04, everything was fine. But then when I upgraded it further to 11.10, the system would only boot to a terminal, no desktop like before. I installed 12.04 on it instead, keeping /home which was on another partition... but it's still booting to terminal. I believe there may be some bad configuration files left over that are causing this. Looking at other similar issues, I looked for /etc/X11/xorg.conf but it doesn't exist. startx says it isn't installed. Installing nvidia-current didn't help (has GF 6600 GT video card). Alt+F7 shows a blank screen. I used the alternate installer, and didn't select any of the optional packages it prompts during installation. Should I have? How do I get it to boot to desktop like normal?

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• Is my new Graphic Card cause for my PC hanging?

  - by Anirudha

  My Computer Specification My Motherboard specification My new Graphic Card Some days ago I bought a GeForce 8400 GS Graphic card. My computer satisfied all the minimum system requirements it required. After installing the Card in PCI Express Slot I started the computer. But it now hangs at the POST screen i.e.(the first screen when the PC loads). It hangs at Checking NVRAM. I had checked the graphic card on other PC and its works perfectly. So I think there's no problem in the Graphic card. If I remove my graphic card and run my PC with built in Graphic card, my PC works and doesn't hang. So, what can be the problem? Thanks for reading....

  Read the article

• I set a frequency too high for my monitor. How can I get it back to normal?

  - by ChristianM

  I have a Geforce 8500GT on my PC, and I made the stupid mistake of setting it to a higher frequency than my monitor can manage. It boots up and it shows me this… and that's all. I can't do anything. The thing is that I think this video board is a little broken anyway, because when it boots up i can't see anything until Windows starts loading. But it worked fine after, no problems. I'm on my on-board video board now, and I don't know how to set the frequency back, because when I boot up with the on-board one, it says something like "changing freq" and it goes ok. How can I get the frequency back for the 8500Gt?

  Read the article

• VMWare Player pauses often

  - by pascal

  I'm using a 64bit Windows 8 inside vmplayer, with 2 virtual processor cores, virtual hard disk resides on a fast local disc and is not preallocated; host CPU is Intel i7 3770, should be capable of hardware virtualisation but I don't know if VMWare uses it; NAT networking; Sound card connected, USB connected, accelerated 3D graphics (NVidia 313.30 on host) My problem is, that the VM often pauses for a few seconds, and then speeds up for a few seconds to reach real time again. Time in the VM actually moves faster after the pause, for example all animations using timers speed up. When running, the vmware-vmx process shows ~150% CPU usage in top, but 0% when pausing (and D state i.e. waiting for IO). iotop shows normal disk writes from vmware-vmx threads, but during pauses, the flush kernel thread uses 99%. Are there some options to try so that VMWare doesn't wait for IO? I've tried a few things available from the GUI but the issue never went away…

  Read the article

• Can there be multiple monitors with these video cards and setup

  - by z_Zelman

  I have a Acer Aspire TimelineX 4830TG-6808 laptop running windows 7 Ultimate with one VGA port and one HDMI port. It has one Intel HD Graphics family card and one NVIDIA GeForce GT 540M. Right now I have one monitor running via the VGA port, and also the basic laptop monitor. When I look at the monitor setup, I see one unused video card available. Can I have another monitor via the HDMI port? If I cannot run three monitors, is there some way I could make a large "single" desktop that extends over two monitors? For the sake of celerity, maybe something like having a virtual machine window that extends over two monitors. Could this maybe come from third party software?

  Read the article

• Computer crashes and freezes a lot

  - by Gigili

  My computer crashes like it freezes sometimes but sometimes it jumps to a black screen which I can do nothing about other than restart. I tested if it has anything to do with the programs I normally run or with the ones I installed, but it's a long time I have the problem and I think it also happened in the beginning that I bought this computer. To make sure, I normally run skype and Spiral Knights and some animation softwares like Flash. The specs are: Nvidia geforce gtx 560 evga Asus p8H67-m evo motherboard 16 gb ram Intel i7 What can I do about it? What issue is more probable to cause the problem?

  Read the article

• No Launcher or bars on desktop when running from a VPS

  - by jeff

  I'm using tightVNC on Ubuntu 12.10 and can see and change the desktop background pic. I can also press f3 to get a file viewer. But there is no topbar or left side launcher. I do not think its an nvidia problem because I'm using a VPS and I logon remotely. I've tried so many variations of /root/.vnc/xstartup such as gnome-session &, or gnome-session –-session=gnome-classic &, my head is spinning. I've seen other people have this issue and was wondering if anyone solved it.

  Read the article

• How to fix "The system is running in low-graphics mode" error?

  - by jokerdino

  Note: This is an attempt to create a canonical question that covers all instances of "low-graphics mode" error that occurs to a user, including but not limited to installation of wrong drivers, incorrect or invalid lightdm greeters, low disk space, incorrect installation of graphics card like ATI and Nvidia, incorrect configuration of xorg.conf file while setting up multiple monitors among others. If you are experiencing the "low-graphics mode" error when trying to login but none of the following answers work for you, please do ask a new question and then update the answers of this canonical question as and when your new question gets answered. When I try to boot into my computer, I am getting this error: The system is running in low-graphics mode Your screen, graphics cards, and input device settings could not be detected correctly. You will need to configure these yourself. How do I fix the failsafe X mode and login into my computer? Answer index: The greeter is invalid

  Read the article

• Kubuntu screensaver won't autostart

  - by Bumpalot

  Am using Ubuntu Lucid + kubuntu-desktop. NVidia works fine. Screensavers set to autostart & worked fine after initial install. Now screensaver attempted to start (brief flash of black only) but since quit doing that.. All screensavers work fine in Test mode. Is there a file entry that controls this?. kde/autostart is empty - should there be an entry here? Would the log files show up any relative errors? I am a newbie & the log info is way out of my league! Have not found any relative posts here or other forums. I would appreciate suggestions.

  Read the article

• XBMC is slow and sluggish in Ubuntu 13.04; how can I speed it up?

  - by Dreamdealer

  I have a Zotac ZBOX ID84 with Intel D2550 proc and Nvidia GT520M GPU, 2GB memory and 320GB hard disk. I tried XBMCbuntu first and it ran perfectly for a few months until I started to mess around with the Terminal. After a re-install I could get the HDMI sound to work again so I installed the latest version of Ubuntu (13.04) instead. That worked fine. The sound and everything worked right away, but the interface of Ubuntu is sluggish and XBMC doesn't run as good as it did in XBMCbuntu. The video playback is slow and it stutters. It speeds up and slows down with the complexity of the video. So, the PC is more than capable to run XBMC and play the videos, but something in Ubuntu (GUI?) slows it down to an unusable pace. Can anybody tell me what I can do to speed things up? Since I'm new to Ubuntu I have no clue where to start looking.

  Read the article

• How to troubleshoot GPU freezes?

  - by dlsmith2

  So in advance I'll just say I am a total linux newbie, so be kind. I just downloaded Ubuntu 11.10 and this is my first experience with Linux. I enjoy it so far and actually enjoy it except for when my computer freezes. This has been quite often so far. I've done a little research and it seems my problem is with the GPU. When it does freeze I can move the cursor but cannot click on anything. I also cannot run Alt+F2 xkill. So my only previous experience has been with Windows and I would normally solve an issue like this with Ctrl+Alt+Delete and just shut down the offending program. I do not know how to do this in Ubuntu and not even sure this would even work. Please help me if you can, how do I deal with a freeze without having to resort to a hard shutdown, I cannot seem to run the computer over one hour without experiencing this issue. I tried accessing my GRUB menu on startup but I can't even seem to do that. Also the only real program I have been running whenever this happens seems to be Firefox. Thank you, appreciate any help. After running lspci | grep VGA command prompt: 00:12.0 VGA compatible controller: nVidia Corporation C67 [GeForce 7150M / nForce 630M] (rev a2)*****

  Read the article

• how to debug BSOD irql_not_less_or_equal error

  - by Sev

  So I'm getting the irql_not_less_or_equal BSOD. I tried looking at the event viewer for potential causes, and cannot find any. I also checked the CPU temperature in BIOS right after the error and that was fine. I've tried 2 sets of RAM chips already, both give the issues. The error doesn't happen consistently...it happens daily, but many hours can pass and it won't happen, or only 10 minutes can pass and it might happen again. By the way, just bought the parts and built the computer myself a couple of weeks ago. How to debug the cause for this? Hardware info: Asus P6X58D PREMIUM motherboard Intel core i7 930 quad core 2.8 ghz Kingston 128 GB SSD 3 Gb/sec Nvidia Geforce GTX 465 PNY Edition Corsair 12 GB DDR3 1600 Mhz Ram Windows 7 Ultimate

  Read the article

• HP dv6-2119tx cant find the built in tv tuner?? Ubuntu 12.10

  - by Mat

  Installed Ubuntu 12.10 yesterday and I've been playing around trying to get all the drivers for my dv6. I have taken care of the the graphics card and the sound card which to be honest is not the greatest drivers I have found. Specs are Intel(R) Core(TM) i7 CPU Q 720 @ 1.60GHz with nvidia gt230 My problem atm is the tv tuner card! Ive searched everywhere but i cant even find something to start on. I guess I am still clueless but I really dont know what to do??? I really dont want windows anymore so if anyone could guide me Id really appreciate it. Thanks...

  Read the article

• Client PC not booting when certain TFT plugged in - TFT or graphics card failure?

  - by Chake

  here comes something quite strange: On a client machine (DELL Vostro 420) we experienced problems when booting: when turning on the machine beeps normal but doesn't display anything and doesn't boot. After some testing I found out, that this only happens if one (of the two) monitors (Iiyama ProLite E2472HDD) is plugged in while booting. If the other monitor (TFT 2) is plugged in everything is fine. Here a small illustration, TFT 1 is the bad guy: TFT 1 | TFT 2 | failure x | x | x x | | x | x | After BIOS-Phase I can safely plug in TFT 1 and everything works just fine. The question is, what can be done to avoide this behavior: Change monitor? (Iiyama ProLite E2472HDD) Change graphics card? (GeForce 9800 GT) Other suggestions?

  Read the article

• Problem with Win7 connecting to Internet

  - by Lucas

  Hello, I have had Windows 7 for about a year now and for the first four months it worked perfectly. But for the last 8 months it has been horrible. It will connect to the Internet for about 5 minutes and then just lose connection. It will reconnect in about 5 minues but then it just keeps disconnecting. I ran a virus scan about 2 weeks ago and I found a Trojan on my PC which I removed and dealt with. It was fine after that but now for these last couple days it has been just as bad as before. I think a virus is causing this but I will read any suggestions and tips to help me solve this problem. Thank you. PC DETAILS: OS: WIndows 7 Home Premium 64-Bit- System Model: Aspire M5802- Processor: Intel Core 2 Quad CPU- Memory: 8192MB RAM- Graphics Card: NVIDIA GeForce GT 220

  Read the article

• installed 12.04 fine. updated graphics driver. now solid puprle screen.

  - by Zephium

  Purchased a new msi ge 70 series labtop. nvidia card gtx 765m. updated driver after install, and ran update manager. All seems well. restarted as required. Now i have a solid purple screen, even if i use boot menu to recovery mode. all i can do is access grub menu 3.10. live cd will run but i get purple screen and cant see choices. please help and im still learning ubuntu. noob talk prefered. i hate making more mistakes. Thanks also tryed changing lines of kernal code using "e" on boot menu, nomodeset and the like. not helping. any way to fix problem through grub?

  Read the article

• Full computer freeze with audio stuttering after playing games for a period of time

  - by Wes

  I've been having a problem with my computer freezing completely when playing games like LA Noire or SW:TOR (yay early access!). Basically, what happens is I will play for around an hour or so (depending on the game) and when the freeze happens, the entire computer locks up and any audio that was being played glitches out and stutters broken-record style (only much shorter. Very techno). I think it might be heat related and thought it might be my video card overheating, so I have been setting my video card (Nvidia Geforce 260GTX 216-core) fan to highest setting, but that has little to no effect. Now I'm beginning to think it's either my FSB or CPU overheating. Can anyone provide some insight or similar experiences? I'm really at a loss and don't wanna damage my rig beyond repair.

  Read the article

• How do you ensure consistent experience across multiple graphics cards (or even driver versions)?

  - by Grigory Javadyan

  So I was writing a simple 2D game with OpenGL and SDL and had this problem when there was awful tearing when running in windowed mode (even though I explicitly asked SDL_SetVideoMode to use double buffering). Didn't worry about it all too much because most of the time the game grabs the entire screen, windowed mode is just for debugging. Anyway, yesterday I updated my nVidia drivers and tearing disappeared, the game runs smooth and looks nice in windowed mode too. I can see how the problem may be in the graphics driver, but this leads to a question. Obviously, professional game developers have to deal with a lot of different hardware/software configurations. What are the techniques they use to make sure the game looks the roughly the same on different graphics cards or even the same model of graphics card, but with different driver versions?

  Read the article

• Multi Monitor Setup Problems

  - by Shamballa

  I have Ubuntu 10.04 LTS - the Lucid Lynx. I have until recently been using a nVida Graphics card (NVIDIA GeForce 9800 GT) with two monitors attached, this all worked fine and dandy. A couple of days ago I bought two new identical LCD monitors for a multi monitor setup and two ATI graphics cards (ATI Sapphire Radeon HD5450). NOTE *All monitors work fine in Windows XP, 2k, Vista and 7 After I had booted into Ubuntu only one display came on, that I kind of expected anyway, then I removed the driver for the nVidia card and downloaded the ATI version which gave me the ATI Catalyst Control Center - in that only two of the displays were showing the third was disabled and showing unknown driver. I enabled the third monitor that stated "Unkown Driver" and had to reboot, upon reboot none of the displays work. I restarted and booted up into recovery mode and from now that is only what I can get into using a failsafe driver. It seems according to the log that a server is already active for Display 0 and I have to remove /tmp/.X0-lock and start again. This is what the log file is saying: Fatal Server Error Server is already active for display 0 if this server is no longer running, remove /tmp/.X0-lock and start again. (WW) xf86 closeconsole: KDSETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETMODE failed: Bad file descriptor (WW) xf86 closeconsole: VT_GETSTATE failed: Bad file descriptor ddxSigGiveUp: closing log I have tried looking at my xorg.config file but unfortunately I have not really got a clue as to how it "should" be - I have tried regenerating it using this command from a terminal: sudo dpkg-reconfigure -phigh xserver-xorg but that had no effect so I am currently stuck in failsafe driver mode but two monitors are active but are mirroring each other. I hope that this is not to long - looking back I have been going on a bit! but I am just trying to explain as much as I can... I have asked this on Linuxquestions but nobody seems to know either or at least I have not had any responses. Could some kind soul please help explain what I can do from here? I would be eternally grateful. Chris * Update * Removing xorg.conf does nothing other than allowing me to use only two monitors - using the command: sudo aticonfig --initial generates the xorg.conf file below: but does not work either - I just get two monitors... Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I have tried using this command from a thread on the Ubuntu Forums with a question similar to mine: sudo aticonfig --initial=dual-head --adapter=all Generated xorg.conf file Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen "aticonfig-Screen[0]-1" RightOf "aticonfig-Screen[0]-0" Screen "aticonfig-Screen[1]-0" RightOf "aticonfig-Screen[0]-1" Screen "aticonfig-Screen[1]-1" RightOf "aticonfig-Screen[1]-0" EndSection Section "Files" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[1]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-1" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "aticonfig-Device[1]-0" Driver "fglrx" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "aticonfig-Device[1]-1" Driver "fglrx" BusID "PCI:2:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]-1" Device "aticonfig-Device[0]-1" Monitor "aticonfig-Monitor[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-0" Device "aticonfig-Device[1]-0" Monitor "aticonfig-Monitor[1]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[1]-1" Device "aticonfig-Device[1]-1" Monitor "aticonfig-Monitor[1]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection This upon reboot renders ALL monitors blank and I have to go into recovery mode and use a failsafe driver. This is so much harder than I thought it would be, I don't think Ubuntu likes ATI for multi (3) monitors or maybe the other way around. Can anyone help still?

  Read the article

• Xubuntu and other Debian based distros slow

  - by William V

  I have a Compaq Presario SR1950NX desktop computer with the AMD64 3800+ processor and 1GB ram and it seems that Ubunutu, Xubuntu and Lubuntu are all laggy. Things seem to be slow such as clicking on menus and opening programs and the UI renders in peices. When using the browser the system slows down considerably. I ran the TOP command and I do notice that xorg hits 30 to 40 percent cpu when running the browsers. I have tried these distros on a spare P4 machine and it is even worse. As long as I don't have a several things open at one time I can manage to get around although sluggishly. I also notice that I can't get debian based distros to install in 64bit (crtc6 failure) only in 32bit. Can anyone tell me what is it that I might be doing wrong? I have an integrated Nvidia card and have tried several of the recommended drivers which sometimes result in no boot screen upon reboot. Thanks

  Read the article

• Error 5A - Internal CPU Error

  - by Mitch

  So I built myself a pc for the first time. The machine has been running properly, and without issue, since March of this year. Today after an hour or so of gaming the machine shutdown without warning. Any attempts to reboot have been unsuccessful. I have managed to get it to post, twice, but it doesn't get as far as the OS before it shuts off again. I pulled the second video card so I could see the error code LED and it appears to be showing 5A which matches to "Internal CPU Error". Am I looking at a failed CPU or is this a symptom of another issue? Any feedback you can provide is most appreciated. Here's my parts list: CPU: Intel Core i7-4930K 3.4GHz 6-Core CPU Cooler: Corsair H105 73.0 CFM Liquid Motherboard: Asus X79 Deluxe ATX LGA2011 Ram: G.Skill Ripjaws X Series 32GB (4 x 8GB) DDR3-1600 Video card (x2): EVGA GeForce GTX 770 2GB Power supply: Corsair 1000W ATX12V / EPS12V

  Read the article

• How to install ubuntu 12.04

  - by William A. Jordan

  I've had ubuntu on my pc for about 5 years,after the new 12.04 version and a day and a half trying to get it to just boot up. I will take it off my pc and rely on windows. I have 5 pc's which I built and am not an amateur, After installing it numerous times and even to run it from your webpage (to no avail). Granted I do have nvidia drivers on it, but after I went to their webpage and downloaded and installed the linux driver it,it still would not boot, by the way I took 2 different pc's apart and used what I thought were compatible (I shouldn't have to do this) parts. I have it on a seperate hd which I will remove and format. Have a nice day and so long (2 much trouble).

  Read the article

• Hulu desktop stopped working on my Dell

  - by jwdinkc

  After last weeks flash update Hulu desktop no longer works on my Dell laptop though it still works on my HP Desktop. Here's what CLI tells me on the Dell: Inspiron-1564:~$ huludesktop Failed to open VDPAU backend libvdpau_nvidia.so: cannot open shared object file: No such file or directory I tried: sudo apt-get install libvdpau_nvidia.so but got E: Unable to locate package libvdpau_nvidia.so and E: Couldn't find any package by regex 'libvdpau_nvidia.so' Hulu does work through the browser and through XBMC. XBMC just doesn't seem to match the video quality of the Hulu Desktop. I don't really know why a nvidia.so is needed for my Intel graphics that comes on Dell Insiron 1564's. anyway. So, do you guys have a solution?

  Read the article

• Attempting to install Ubuntu 11.10 along side Windows 7 Professional 64bit. Installer doesn't recognize an operating system present

  - by KichigaiDave

  System Details: Asus Sabertooth 990FX motherboard AMD FX-8120 CPU 16 GB DDR3 1600 Corsair Vengance RAM (4x4) EVGA Nvidia GTX-560Ti video card 2x Dvd/cd rw dirves 1 Bluray RW drive 1 Orico USB 3.0 & eSata panel 1 Sabrent floppy bay card reader w/USB 2.0 port 760W pc power & cooling PS OCZ agility 120GB SSD (Windows 7 Professional 64bit installed in an approx 80gb partition, NTFS. There is also a "System Reserved" partition shown in disk management at 100mb in size, also NTFS) That leaves about 32GB usable free, un-partitioned space in which I hoped to install Ubuntu. However when I run the Ubuntu 11.10 AMD64 installer, it doesn't show there is even an operating system installed. It just shows the entire drive as free-unpartitioned space. Just not sure what to do here. I was thinking about using the Wubi installer, but i don't know about that. Is the performance reduction pretty drastic? Thanks,

  Read the article

< Previous Page | 60 61 62 63 64 65 66 67 68 69 70 71  | Next Page >