Search Results

Search found 8228 results on 330 pages for 'card reader'.

Page 66/330 | < Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >

  • High number of ethernet errors. Tool for testing the ethernet card?

    - by Fabio Dalla Libera
    I have an Asus Sabertooth X79. I often get corrupted files. I checked the RAM, but memtest finds no errors. To avoid the possibility of disk errors, I tried copying the files to tmpfs. If I copy from the network, I get md5sum mismatches about once every 10 times using a 6Gb file. Copying from RAM to RAM, I didn't get mismatches. I get a very high number of errors in ifconfig (compared to others PCs I just took as reference, which have 0 with much more traffic). Here is an example RX packets:13972848 errors:200 dropped:0 overruns:0 frame:101 The motherboard is new, but do you think there're some problems with it? What could I use to test the (integrated) network adapter? What else do you think I should double check? --edit-- I tried another NIC, it gives a lot of Corrupted MAC on Input. Disconnecting: Packet corrupt lost connection. I noticed that another PC downloads at 11.1MB/s without problems. This pc at 66.0 MB/s. Is there any way to try to limit the speed?

    Read the article

  • Why is my card Unity blacklisted with all the requirements fulfilled?

    - by Oxwivi
    The following is the Unity test output: OpenGL vendor string: NVIDIA Corporation OpenGL renderer string: GeForce FX 5500/AGP/SSE2 OpenGL version string: 2.1.2 NVIDIA 173.14.30 Not software rendered: yes Not blacklisted: no GLX fbconfig: yes GLX texture from pixmap: yes GL npot or rect textures: yes GL vertex program: yes GL fragment program: yes GL vertex buffer object: yes GL framebuffer object: yes GL version is 1.4+: yes Unity supported: no As you can see, all requirements are fulfilled but my GPU is blacklisted. What can I do about it?

    Read the article

  • How are video card\graphics drivers written exactly? [closed]

    - by Bigyellow Bastion
    I was thinking, since I want an application layer for my operating system, how or what would be the best way to write, or better understand how to write, my own graphics device drivers or software to enable application layered software to request data through my graphics system (I.e. windows, icons, mouse pointers). I don't need every little detail, I'd just like some possible insight on the procedure one may accomplish this feat in, perhaps the best way to understand the interaction between the graphics GUI rendering software to the hardware interaction directly, and the application software requesting the graphics driver itself.

    Read the article

  • How do I get to work my Atheros AR9485 Wireless card in Ubuntu 14.04 LTS?

    - by Ivan Kreimer
    I've recently installed Ubuntu 14.04 LTS in my ASUS D550CA, and so far things have gone great. The only problem I've got is the Wi-Fi. It doesn't work. I've got an Qualcomm Atheros AR9485. I've tried installing the drivers, but the sytem says it doesn't find any. So I started looking around this forum for solutions. I've read every single post from this forum about my Wi-Fi network adapter, and I've found nothing that solves my problem. Let me give you some info about my configuration. Disclaimer: my configuration is in spanish, so if you don't understand something you can either use Google translate, or use your imagination. :D When I run $ sudo lshw -C network this is what I get: *-network DEACTIVATED descripción: Interfaz inalámbrica producto: AR9485 Wireless Network Adapter fabricante: Qualcomm Atheros id físico: 0 información del bus: pci@0000:02:00.0 nombre lógico: wlan0 versión: 01 serie: 28:e3:47:5c:5d:3f anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress bus_master cap_list rom ethernet physical wireless configuración: broadcast=yes driver=ath9k driverversion=3.13.0-34-generic firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn recursos: irq:17 memoria:f7d00000-f7d7ffff memoria:f7d80000-f7d8ffff *-network descripción: Ethernet interface producto: RTL8101E/RTL8102E PCI Express Fast Ethernet controller fabricante: Realtek Semiconductor Co., Ltd. id físico: 0.2 información del bus: pci@0000:03:00.2 nombre lógico: eth0 versión: 06 serie: e0:3f:49:ce:57:49 tamaño: 100Mbit/s capacidad: 100Mbit/s anchura: 64 bits reloj: 33MHz capacidades: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuración: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8402-1_0.0.1 10/26/11 ip=181.165.245.39 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s recursos: irq:41 ioport:e000(size=256) memoria:f0004000-f0004fff memoria:f0000000-f0003fff At the beginning, you'll see that it says "*-network DEACTIVATED" (or at least that's what I translated), is that something bad? Then, when I run ipconfig this is what I get: eth0 Link encap:Ethernet direcciónHW e0:3f:49:ce:57:49 Direc. inet:181.165.245.39 Difus.:181.165.245.255 Másc:255.255.255.0 Dirección inet6: fe80::e23f:49ff:fece:5749/64 Alcance:Enlace ACTIVO DIFUSIÓN FUNCIONANDO MULTICAST MTU:1500 Métrica:1 Paquetes RX:221199 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:62025 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:1000 Bytes RX:124409589 (124.4 MB) TX bytes:7471899 (7.4 MB) lo Link encap:Bucle local Direc. inet:127.0.0.1 Másc:255.0.0.0 Dirección inet6: ::1/128 Alcance:Anfitrión ACTIVO BUCLE FUNCIONANDO MTU:65536 Métrica:1 Paquetes RX:2977 errores:0 perdidos:0 overruns:0 frame:0 Paquetes TX:2977 errores:0 perdidos:0 overruns:0 carrier:0 colisiones:0 long.colaTX:0 Bytes RX:397158 (397.1 KB) TX bytes:397158 (397.1 KB) When I put iwconfig: eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Finally, when I put sudo rfkill list all, I got: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: yes 1: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: asus-bluetooth: Bluetooth Soft blocked: no Hard blocked: no I hope anyone can help me solve this, I've searched a lot and found no solution. Thanks a lot.

    Read the article

  • 12.04 - how to install alsa 1.0.27, to resolve dell sound card microphone echo issue to local speaker?

    - by YumYumYum
    Problem: Microphone in or Line in microphone audio is instantly captured and sinked to the local speaker, cause horrible echo problem About my system: (NO PulseAudio used (cause its always crash and unstable for my system/hardware, so auto killed and never used) I have ALSA 1.0.25 version running in Ubuntu 12.04 / 64-bit, with random kernel installed: kernel 3.5.0-17-generic kernel 3.8.x kernel 3.11.x But the echo problem is not resolved after trying all kernel. So, last option left now is to use ALSA 1.0.27 to see if that solves the problem. Is there any away to use ALSA 1.0.27 from any PPA to install in the Ubuntu 12.04? (without making it from source, to avoid breaking other packages and dependencies)

    Read the article

  • Dell Upgrade to 12.04 LTS No wifi, graphic card driver and bluetooth Problem?

    - by Mattlinux1
    (Dell inspiron m5040 Upgrade to 12.04 LTS from 11.10 wifi wont work and has two bluetooth icons?) Old title of post! No Wifi/Bluetooth Problem. "Both Fixed", see below comments for bluetooth fix and see bottom answer for wifi fix. My online upgrade of 12.04 LTS, was installed to my laptop the Dell inspiron m5040, when it was done i found that my wifi did not even get picked up anymore and i now have two bluetooth icons at the top?? So what i have been doing for now is at the boot screen. I hit the use previous linux version, this works fine but also has the two bluetooth at the top. Is very thankful for any answers for this fix, Thank You. Ok bluetooth problem solved by – fossfreedom answer by deleting the other bluetooth program running in software center. Now the other problem is Wifi: just have to restart system as it works in previous linux version boot opt, but on the first boot screen opt run ubuntu it will not pick up wifi drivers. Broadcom 802.11 Linux STA wireless driverfor use with Broadcom's BCM4311-, BCM4312-, BCM4313-, BCM4321-,BCM4322-, BCM43224-, and BCM43225-, BCM43227- and BCM43228-basedhardware. And 3D-accelerated proprietary graphics driver for ATI cards. This driver is required to fully utilise the 3D potential of some ATI graphics cards, as well as provide 2D acceleration of newer cards. will not instill is there anyway for me to make a copy of the drivers via usb HDD and then put them on new upgraded version.

    Read the article

  • Newly installed 12.04 on Radeon or NVIDIA type of gfx card?

    - by Falk
    I use a Nvidia Quadro NVS 290/PCIe/SSE2 at work with dual monitor setup. Since 11.10 things has gone downwards with performance. But now with 12.04 performance is even worse, and I can agree that the 290 is old and puny. So when I look what low profile cards I can get to my computer today, the choice it Radeon HD 6570 or NVIDIA Quadro 600. I have always used Nvidia on linux beq I think that historically their drivers worked better. But which one do you recommend today on 12.04 and Unity3d? -- Regards Falk

    Read the article

  • Internet unusably slow with Realtek Semiconductor Co., Ltd. RTL8111/8168B card

    - by user42424
    So I have recently installed Ubuntu 11.10 for a dual boot with wind 7. After the install I had like 300 updates, so I installed them. At first I could use the internet, although it was extremely slow. However now I cannot, sometimes it will load and others it will simply time out. When I try to download something it will either take forever or will not at all. This is a wired system. On Windows side my speeds are fine. Any help would be greatly appreciated. Also like I said I am new to Linux/Ubuntu so please be nice. One last thing, I also installed 11.10 for same dual boot on my laptop, and wireless speed is the same as on Windows? Only the wired desktop gives me the problem? Hear is some hardware info.. Hope it helps. Mobo: Gigabyte GA=880GMA- AMD / CPU: AMD Phenom (tm) IIx4 965 / 16 GB Ram / Realtek PCIe GBE Family Controller / Cisco Linksys E2000 / Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) / eth0 Link encap:Ethernet HWaddr 50:e5:49:33:64:cf inet addr:192.168.1.118 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::52e5:49ff:fe33:64cf/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:76722 errors:0 dropped:76722 overruns:0 frame:76722 TX packets:49692 errors:0 dropped:65 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:107956638 (107.9 MB) TX bytes:4342553 (4.3 MB) Interrupt:44 Base address:0x2000 thanks to roadmr problem solved! I powered down PC, un plugged power from pc end, waited a few (maybe 3)minutes. plugged power back in, pushed and held power button for 30 + seconds. Let go, powered on PC, and my Internet is fine! downloads and web speed blaze, just like on my Win 7 boot, maybe even faster. Problem Solved, Thanks to all!! **

    Read the article

  • What Can I Use A Laptop Data Card For?

    So you?ve been looking at alternatives to having internet cable installed in your home and you?re feeling pretty guilty about stealing the neighbors Wi-Fi. If you?re tired of going down to your local... [Author: Tony Previte - Computers and Internet - April 03, 2010]

    Read the article

  • Is it possible to update my graphic card drivers?

    - by madmaxpt
    This is what the lspci -v command shows in the VGA compatible controller section: 00:02.0 VGA compatible controller: Intel Corporation Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: Dell Device 048e Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f0200000 (32-bit, non-prefetchable) [size=512K] I/O ports at 18d0 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f0000000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 i915 is only compatible with OpenGL 1.4 and cannot use shaders and I'd like to use some Open GL 2.0 functionalities. Is it possible to update the drivers or is my hardware limited to OpenGL 1.4 ?

    Read the article

  • How do I get a Broadcom Wireless BCM43225 card working?

    - by DanFritz
    During the installation of my Ubuntu 12.10 I could use the wireless connection for extra updates. After the installation I updated Ubuntu and it installed 74 new updates, after that no wireless connection (say what!). So I did try some stuff, I followed the tutorial to load the windows drivers using ndiswrapper (https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper) but I always get that the ndiswrapper module is not loaded (but I did install the extra 3 packages, still doesnt work). ndiswrapper-source ndiswrapper-dkms ndiswrapper-common Please somebody help! Thanks a lot

    Read the article

  • How do I get a Broadcom BCM4313 wireless card working?

    - by viky
    I upgraded Ubuntu from 11.10 to 12.04, until which wireless was working just fine. After the upgrade and reboot, wireless is not even being detected (When I click the network manager icon in the top panel, it does not show the wireless networks. Neither the Enable wireless option is there). But my laptop's LED indicator shows wireless is on. This is a Dell Vostro 3450 laptop with: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)** (from lspci). Is any other info needed? How do I get Wifi working?

    Read the article

  • Why doesn't wireless work on Wubi 12.04 with a Broadcom BCM4312 card?

    - by Kristin
    I have recently set up ubuntu 12.04 on my laptop using the Wubi installer. I am having a very difficult time setting up a wireless internet connection. I am currently set up with an ethernet connection which I have used to download all new updates and to activate the Broadcom STA wireless driver. I have tried several things in the terminal based on other people's posts: ~$ rfkill list 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes ~$ rfkill unblock all It doesn't change anything. I also tried rebooting and connecting to the internet on my Windows Vista OS, and it worked, so I know that the connection should not be hard blocked. I have also tried installing b43 firmware (lp/phy version) that is supposed to work with my chip (BCM4312). It seems to have no effect. Then I tried: ~$ iwconfig lo no wireless extensions. eth1 IEEE 802.11 Access Point: Not-Associated Link Quality:5 Signal level:0 Noise level:0 Rx invalid nwid:0 invalid crypt:0 invalid misc:0 eth0 no wireless extensions. This is my first time trying to work with ubuntu, so I would appreciate any help. Thanks. Also sorry this is poorly formatted. I'm having troubles with that too.

    Read the article

  • 12.04: I need a new network card - and I think this one may work?

    - by Jason Malone
    I found this list of compatible USB wireless network adaptors: http://www.cyberciti.biz/tips/linux-usb-wireless-compatibility-adapter-list.html Listed here is the Belkin F5D8053. I'm looking for a store to buy a suitable adaptor in locally and I can't find that particular adaptor - but I can see a Belkin F7D4101az. I think this is simply a newer model - but a Google search for "ubuntu belkin f7d4101az" brings no results - not even people trying to get it to work. Nothing. So I didn't want to purchase it without being sure. There's really only one PC shop that sells this sort of stuff around here - so here's a list of all my available options: http://www.pcworld.co.uk/gbuk/wireless-cards-adapters/xx_7088_70095_xx_xx/xx-criteria.html I'd really like to get one today, because I have a lot of work to do and don't really want to have to wait a week for a new adaptor - I spent 6 or 7 hours last night trying to get my Dell 1450 to work with no luck. Any help would be much appreciated.

    Read the article

  • Unable to get wireless card working properly in DELL D620 laptop - Zorin OS 6.0 (3.2.0)

    - by ElliTech
    I have a DELL D620 laptop running Zorin OS 6.0 (3.2.0) The wireless was working prior to running Update Manager. Here is the output from some commands: dell@dell-lt:/$ rfkill list all 0: dell-wifi: Wireless LAN Soft blocked: no Hard blocked: no dell@dell-lt:/$ iwconfig lo no wireless extensions. eth0 no wireless extensions. dell@dell-lt:/$ ifconfig -a eth0 Link encap:Ethernet HWaddr 00:18:8b:d4:d8:2f inet addr:192.168.1.74 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::218:8bff:fed4:d82f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:22227 errors:0 dropped:0 overruns:0 frame:0 TX packets:15027 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26452734 (26.4 MB) TX bytes:1708955 (1.7 MB) Interrupt:18 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) I am at a loss as to how to get the wireless working!!! ElliTech

    Read the article

  • Does GPG allow encryption of multiple files using a wild card like *filename*? [on hold]

    - by user47427
    I am trying to automate the encryption of files on a windows server using a .bat file I created. As long as the filename is hardcoded in the .bat file this works. I want to encrypt numerous files using this .bat file but files are not encrypted when I use wildcards in the filename like filename.txt. I've been trying various version of the following command at the DOS prompt to no avail. All attempts have returned syntax for usage. C:\gpg -v --batch -- yes --always-trust -e -r <encryption-key> *part-of-the-file-name* usage: gpg [options] --encrypt [filename] I received the same usage message with this command: C:\gpg -v --batch -- yes --always-trust -e -r --encrypt part-of-the-file-name I tried without the -v and some of the other options and I still received the same message. I have spent hours today searching the internet for an answer and I can't find one anywhere? Please help.

    Read the article

  • How do I get the wireless card on a Lenovo S205 working?

    - by user206829
    I tried to install 12.04, 13.04, and now 13.10 on the machine and followed all the instructions that made sense that I could find and still have not gotten wifi to work. It keeps it hard blocked for some reason, not sure why and not sure anyone out there either has figured it out because I would have found it on Google. When I boot from the formatted USB drive, I have WiFi and everything working, why doesn't work after the USB drive is removed? What driver is the USB/wubi or whatever using so that I can install it and have things working? I could have used wubi and installed Ubuntu like that, but I want to make this machine a fully dedicated Ubuntu machine. The laptop is a Lenovo S205 in case anyone can help. I really would like to use 12.04 or higher, i don't want to downgrade to an older version of Ubuntu if at all possible.

    Read the article

  • Problems with makeObjectsPerformSelector inside and outside a class?

    - by QuakAttak
    A friend and I are creating a card game for the iPhone, and in these early days of the project, I'm developing a Deck class and a Card class to keep up with the cards. I'm wanting to test the shuffle method of the Deck class, but I am not able to show the values of the cards in the Deck class instance. The Deck class has a NSArray of Card objects that have a method called displayCard that shows the value and suit using console output(printf or NSLog). In order to show what cards are in a Deck instance all at once, I am using this, [deck makeObjectsPerformSelector:@selector(displayCard)], where deck is the NSArray in the Deck class. Inside of the Deck class, nothing is displayed on the console output. But in a test file, it works just fine. Here's the test file that creates its own NSArray: #import <Foundation/Foundation.h> #import "card.h" int main (int argc, char** argv) { NSAutoreleasePool* pool = [[NSAutoreleasePool alloc] init]; Card* two = [[Card alloc] initValue:2 withSuit:'d']; Card* three = [[Card alloc] initValue:3 withSuit:'h']; Card* four = [[Card alloc] initValue:4 withSuit:'c']; NSArray* deck = [NSArray arrayWithObjects:two,three,four,nil]; //Ok, what if we release the objects in the array before they're used? //I don't think this will work... [two release]; [three release]; [four release]; //Ok, it works... I wonder how... //Hmm... how will this work? [deck makeObjectsPerformSelector:@selector(displayCard)]; //Yay! It works fine! [pool release]; return 0; } This worked beautifully, so I created an initializer around this idea, creating 52 card objects one at a time and adding them to the NSArray using deck = [deck arrayByAddingObject:newCard]. Is the real problem with how I'm using makeObjectsPerformSelector or something before/after it?

    Read the article

  • How can I make sound over hdmi in kubuntu work?

    - by user32509
    I have used a hdmi cable to connect my lcd (which is connected with my speakers) with my nvida 275 gtx grafic card. I can not get the sound output to work. The hardware itself is working probably - I tested it under windows. Currently I am running Kubuntu 9.10 64 with Nvidia 190.53. The sound output worked fine before I installed the hdmi connection. (German output - i can change it, if you tell me how :)) aplay -l **** Liste von PLAYBACK Geräten **** Karte 0: Intel [HDA Intel], Gerät 0: ALC889A Analog [ALC889A Analog] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 Karte 0: Intel [HDA Intel], Gerät 1: ALC889A Digital [ALC889A Digital] Untergeordnete Geräte: 1/1 Untergeordnetes Gerät '0: subdevice #0 aplay -L front:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog Front speakers surround40:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.0 Surround output to Front and Rear speakers surround41:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 4.1 Surround output to Front, Rear and Subwoofer speakers surround50:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.0 Surround output to Front, Center and Rear speakers surround51:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 5.1 Surround output to Front, Center, Rear and Subwoofer speakers surround71:CARD=Intel,DEV=0 HDA Intel, ALC889A Analog 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers iec958:CARD=Intel,DEV=0 HDA Intel, ALC889A Digital IEC958 (S/PDIF) Digital Audio Output null Discard all samples (playback) or generate zero samples (capture) pulse Playback/recording through the PulseAudio sound server And i disabled mute in kmix an all channels :)

    Read the article

  • How to verify system using right GPU, after system reset [duplicate]

    - by Antoros
    This question already has an answer here: Is my mobile AMD card being used? 2 answers OS: Windows 8 CPU: Intel® Core™ i7 Processor 3635QM GPU 1 : Intel HD Graphics 4000 GPU 2 : AMD Radeon™ HD 8870M other info: System Spects Problem: im unsure that CCC is using AMD card instead of Intel's, i have encountered several issues since updating to 8.1 and i don't know what to do What happened: Installed 8.1 patch first day After 1 minute of use, BBSOD, windows never loaded again System restore wouldnt recognize 8.0 restore points i did a system reset to windows 8 since the laptop was only 3 weeks old System Broke, it did restore to factory BUT kept the registry almost intact, i had to install almost everything again, since the factory drivers where working with the updated one's registry and several problems CCC Broke too <- What i've already done Installing new drivers on top of old ones didnt work, so i used AMD uninstaller first Uninstalled and Re-installed Intel's HD Graphics Driver Tried to install mobile center, but AMD told me that it wasnt compatible (even if thats the only driver that they provide via their page as seen Here) Tried to use Auto-Detect, couldnt install driver because card was disabled because it didnt have the drivers... (see what they did here?) Had to use a workaround with Samsung Update, the driver didnt appear as download so had to use search and downloaded the driver manually. Now the graphic card appears on device manager and catalyst but as 8800 series (not exact model), and cant check the card with neither dxdiag/GPU-z/HWMonitor when right-clicking on CCC only Intel card appears launching a game and using as "high performance" would speed it up a little but i cant be sure How to verify its working properly? HWMonitor wont show AMD card even when set to high performance Latest GPU-Z wont work because a problem with Intel's, and legacy ones wont either what can I do now? I don't even know if I fixed my problem or not, and i also want to to use Adobe Premier with it, and its locked (the option to run it with the amd card not intels) Edit: now it seems to work, but cant change the setting for adobe Premiere and other programs that i Need to

    Read the article

  • How to set up multiple video cards in Windows XP

    - by Swish
    All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

    Read the article

  • What's the most DRY-appropriate way to execute an SQL command?

    - by Sean U
    I'm looking to figure out the best way to execute a database query using the least amount of boilerplate code. The method suggested in the SqlCommand documentation: private static void ReadOrderData(string connectionString) { string queryString = "SELECT OrderID, CustomerID FROM dbo.Orders;"; using (SqlConnection connection = new SqlConnection(connectionString)) { SqlCommand command = new SqlCommand(queryString, connection); connection.Open(); SqlDataReader reader = command.ExecuteReader(); try { while (reader.Read()) { Console.WriteLine(String.Format("{0}, {1}", reader[0], reader[1])); } } finally { reader.Close(); } } } mostly consists of code that would have to be repeated in every method that interacts with the database. I'm already in the habit of factoring out the establishment of a connection, which would yield code more like the following. (I'm also modifying it so that it returns data, in order to make the example a bit less trivial.) private SQLConnection CreateConnection() { var connection = new SqlConnection(_connectionString); connection.Open(); return connection; } private List<int> ReadOrderData() { using(var connection = CreateConnection()) using(var command = connection.CreateCommand()) { command.CommandText = "SELECT OrderID FROM dbo.Orders;"; using(var reader = command.ExecuteReader()) { var results = new List<int>(); while(reader.Read()) results.Add(reader.GetInt32(0)); return results; } } } That's an improvement, but there's still enough boilerplate to nag at me. Can this be reduced further? In particular, I'd like to do something about the first two lines of the procedure. I don't feel like the method should be in charge of creating the SqlCommand. It's a tiny piece of repetition as it is in the example, but it seems to grow if transactions are being managed manually or timeouts are being altered or anything like that.

    Read the article

  • Assigning values to the lable through database depending on listbox values

    - by SurajVitekar
    I want to assign the values of five labels from database regarding to values selected in listbox. The db query returns single column with multiple records. Please help. I'm working with C# 2010 and MS SQL. My current code is: private void listBox1_SelectedIndexChanged(object sender, EventArgs e) { try { String c1, c2; c1 = "NULL"; MessageBox.Show("LB index :"+listBox1.SelectedIndex.ToString()); //p = listBox1.SelectedItem.ToString(); SqlConnection con = new SqlConnection(); con.ConnectionString = "Data Source=localhost;Initial Catalog=eVoting;Integrated Security=True;Pooling=False"; con.Open(); MessageBox.Show("List bOx sect :"+listBox1.SelectedValue.ToString()); SqlCommand cmd = new SqlCommand("select Firstname from candidates where position ='" + listBox1.SelectedValue.ToString() + "'", con); int index = 0; SqlDataReader reader = cmd.ExecuteReader(); while(reader.Read()) { if (index == 0) { c1 = reader[index].ToString(); radioButton1.Text = c1; } if (index == 1) { c1 = reader[index].ToString(); radioButton2.Text = c1; } if (index == 2) { c1 = reader[index].ToString(); radioButton3.Text = c1; } if (index == 3) { c1 = reader[index].ToString(); radioButton4.Text = c1; } if (index == 4) { c1 = reader[index].ToString(); radioButton4.Text = c1; } if (index == 5) { c1 = reader[index].ToString(); radioButton5.Text = c1; } MessageBox.Show("c1 :" + c1); index++; } } catch (Exception E) { } }

    Read the article

  • mysql data read returning 0 rows from class

    - by Neo
    I am implementing a database manager class within my app, mainly because there are 3 databases to connect to one being a local one. However the return function isn't working, I know the query brings back rows but when it is returned by the class it has 0. What am I missing? public MySqlDataReader localfetchrows(string query, List<MySqlParameter> dbparams = null) { using (var conn = connectLocal()) { Console.WriteLine("Connecting local : " + conn.ServerVersion); MySqlCommand sql = conn.CreateCommand(); sql.CommandText = query; if (dbparams != null) { if (dbparams.Count > 0) { sql.Parameters.AddRange(dbparams.ToArray()); } } MySqlDataReader reader = sql.ExecuteReader(); Console.WriteLine("Reading data : " + reader.HasRows + reader.FieldCount); return reader; /* using (MySqlCommand sql = conn.CreateCommand()) { sql.CommandText = query; if (dbparams != null) { if (dbparams.Count > 0) { sql.Parameters.AddRange(dbparams.ToArray()); } } MySqlDataReader reader = sql.ExecuteReader(); Console.WriteLine("Reading data : " + reader.HasRows + reader.FieldCount); sql.Parameters.Clear(); return reader; }*/ } } And the code to get the results query = @"SELECT jobtypeid, title FROM jobtypes WHERE active = 'Y' ORDER BY title ASC"; //parentfrm.jobtypes = db.localfetchrows(query); var rows = db.localfetchrows(query); Console.WriteLine("Reading data : " + rows.HasRows + rows.FieldCount); while (rows.Read()){ } These scripts return the following : Connecting local : 5.5.16 Reading data : True2 Reading data : False0

    Read the article

  • How to convert PowerPoint presentations into a Kindle/E-reader friendly form?

    - by Shiki
    I have a lot of documents in .ppt and .pptx (blame the co-workers). I would like to read them on way home or elsewhere... when I have a little time to catch up with things. One thing I could do with the documents is cutting them together into one file. But saving that one even if a smaller version of PDF (according to Office 2010) results in a huge file. And PDF is hardly readable on a Kindle. I would need something .epub free, easy-on-the-device way. Is there such a thing? (Manually I could copy all the images down into native text and whatnot and create new presentations, save those, convert them. But that would just take a lot of time.)

    Read the article

< Previous Page | 62 63 64 65 66 67 68 69 70 71 72 73  | Next Page >