Search Results

Search found 21301 results on 853 pages for 'duplicate values'.

Page 661/853 | < Previous Page | 657 658 659 660 661 662 663 664 665 666 667 668  | Next Page >

• Getting AWStats to work in Ubuntu 12.04

  - by koogee

  I'm new to apache and i'm trying to set up AWStats on my ubuntu 12.04 server. I've followed the guide at Ubuntu docs https://help.ubuntu.com/community/AWStats I set it up according to the instructions and awstats is able to generate initial stats from apache log successfully. I placed the links to awstats in the default virtual host file. However when I try to run http://server-ip-address:8080/awstats/awstats.pl, I get: Error: SiteDomain parameter not defined in your config/domain file. You must edit it for using this version of AWStats. Setup ('/etc/awstats/awstats.conf' file, web server or permissions) may be wrong. Check config file, permissions and AWStats documentation (in 'docs' directory). Here is my /etc/apache2/sites-available/default file: <VirtualHost *:8080> ServerAdmin webmaster@localhost DocumentRoot /home/saad/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/saad/www/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> Alias /awstatsclasses "/usr/share/awstats/lib/" Alias /awstats-icon "/usr/share/awstats/icon/" Alias /awstatscss "/usr/share/doc/awstats/examples/css" ScriptAlias /awstats/ /usr/lib/cgi-bin/ Options ExecCGI -MultiViews +SymLinksIfOwnerMatch ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> The only three variables I edited in /etc/awstats/awstats.conf are: LogFile="/var/log/apache2/access.log" SiteDomain="server-name.noip.org" HostAliases="localhost 127.0.0.1 server-name.no-ip.org" The apache server works fine and i'm able to access other pages stored on the server. Any guidance would be welcome.

  Read the article

• Apache2: not defined domains directing to the same virtual host

  - by rafaame

  I have Apache2 configured in a debian box with virtual hosts. I have several domains pointing to the box's IP address. The domains whose virtual hosts are configured works perfectly. But if I type in the browser a domain that is pointing to the box but whose the virtual host is not configured, I get to a random virtual host of another domain in the box. Not a random, but one of the virtual hosts (always the same) but I dunno why it is it. The correct would be that the domains that are not configured as virtual hosts return a hostname error or something, right? Does someone know how to fix the problem? One of my virtual hosts config file: <VirtualHost *:80> ServerAdmin [email protected] ServerName dl.domain.com DocumentRoot /var/www/dl.domain.com/public_html/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/dl.domain.com/public_html/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My apache2.conf http://www.speedyshare.com/files/29107024/apache2.conf Thanks for the help

  Read the article

• How to verify PostgreSQL 9 has installed correctly on a CentOS server?

  - by A4J

  I'm trying to install the PG (postgres) gem on a CentoOS server, but it keeps saying Postgres is too old, even though I have upgraded it to 9.1.3 (as per the instructions here http://www.davidghedini.com/pg/entry/install_postgresql_9_on_centos). I am using CentOS 5.8 (and Ruby 1.9.3) Here is the error message: Building native extensions. This could take a while... ERROR: Error installing pg: ERROR: Failed to build gem native extension. /usr/local/bin/ruby extconf.rb checking for pg_config... yes Using config values from /usr/bin/pg_config checking for libpq-fe.h... yes checking for libpq/libpq-fs.h... yes checking for pg_config_manual.h... yes checking for PQconnectdb() in -lpq... yes checking for PQconnectionUsedPassword()... no Your PostgreSQL is too old. Either install an older version of this gem or upgrade your database. *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. psql --version confirms my version: psql (PostgreSQL) 9.1.3 I can confirm packages installed: Setting up Install Process Package postgresql91-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-devel-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-server-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-libs-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Package postgresql91-contrib-9.1.3-1PGDG.rhel5.x86_64 already installed and latest version Nothing to do Any ideas on how to troubleshoot this? Thanks in advance.

  Read the article

• Don't let the mouse wake up displays from standby

  - by progo

  I like to put my displays to powersave/standby mode when I leave the computer for a while. It would be ok if it weren't for oversensitive mouse. Sometimes the driver reads in some movement that's not visible to the naked eye (the cursor, that is) and it breaks the power save. It would wait for another 10 minutes before going back to its standby. My workaround is the following script bound to C-S-q: xlock -startCmd 'xset dpms 2 2 2' -endCmd 'xset dpms 600 1200 1300' -mode blank -echokeys -timeelapsed +usefirst By using xset I set the values to 2 seconds each before going to standby. It's not nice, anyway. Sometimes there are cool fortunes that I want to read before typing in the password. I could keep the cursor moving but it's cludgy. (By the way, xlock's option mousemotion doesn't help -- it just hides the cursor but the displays fire up nevertheless.) So the question: is there a way to make displays go standby and stay there until a keyboard key is pressed? I'm running gentoo and recent Xorg, but I hope the answer doesn't have to be distro-specific. Basically the answer can be as simple as how to enable/disable mouse within command line? It think that would do the job if DPMS doesn't know the idea.

  Read the article

• Switch Text Paragraphs in OpenOfficeOrg Writer mailmerge

  - by Glen S. Dalton

  I am using mailmerge to write the same letter with minor differenes to many peolpe. I experienced that switching text paragraphs depending on database values was not easy for me. I ended up putting huge text paragraphs into the database becaus switching did not really work for me. Actually I dont' understand how writer does it and maybe the boolean evaluation is buggy? There is some possibility making paragraphs invisible depending on database fields, but it was frustrating. After marking a paragraph as invisible (depending on a condition) it went invisible in the main document and did not come back, I lost the content. An example in pseudocode of what I want in my mailmerge document: {if [[balance]] 10} We owe you money. Please can you send your bank details. {end if} {if [[balance]] < -10} Please transfer the remaining amount to our banc account 123... {end if} Maybe this could be done with makros? But how to combine makros with mailmerge? Can you tell me what are the pitfalls and how to master them? I once did this with ms word, it was a lot easier. The normal mailmerge (including database fields in the letters) works fine for me in OpenOffice writer.

  Read the article

• Integrating HP Systems Insight Manager into an existing environment

  - by ewwhite

  I'm working with an environment that spans multiple data centers/sites and consists primarily of HP ProLiant servers (G5-G7) running Linux. The mix is 30% RHEL/CentOS, the rest are Gentoo :(. I also have a few dozen virtual machines running back-office and Windows servers on VMWare ESX hosts. I run OpenNMS to pull SNMP data from the various server nodes and networking devices. While OpenNMS works wonderfully for up/down, thresholds and notifications, it's native handling of traps is a little rough and the graphs are not particularly pretty. I use Orca/RRD graphs for performance trending and nice graphs. I'm tasked with inventorying the environment and wanted to come up with a clean way to organize server information. Since my environment is mostly HP, I've been playing with HP Systems Insight Manager as a way to extract server data and to deploy HP health/monitoring packages and firmware. The Gentoo systems eventually have to be converted to CentOS, so getting a quick assessment of what hardware is where would be great. Although I've read through a few hundred pages of HP manuals, I'm having a difficult time understanding how to get HP SIM to do what I want, though. My main problems are: I have about 40 subnets to deal with; 98% connected with private lines to facilities across the globe. I don't want to initiate an HP SIM discovery only to pull back every piece of intermediate networking hardware and equipment from all of the locations. I'd like this to focus on the servers. I have OpenNMS configured to accept traps. I don't want HP SIM to duplicate that effort. It seems like the built-in software deployment tool wants to overwrite the trapsink parameters for the systems it encounters during discovery. I have about 10 administrative username/password combinations in use across this infrastructure. Is there a more efficient way to get HP SIM to do the discovery or break discovery into manageable chunks? In terms of general workflow, do people typically install the HP Management Agents during the initial OS deployment (e.g. kickstart post script) or afterwards from HP SIM? Is HP SIM too thick/fat to be an inventory tool? I can't tell if it's meant to be used standalone or alongside other monitoring products. Since the majority of the systems I'm trying to track are those running Gentoo (in order to plan the move to CentOS), is there any way for HP SIM to extract system model information from them ( like dmidecode)? I have systems here where I may have an SSH key established, but not direct user or login access. Is there a way for me to import an SSH private/public key pair into HP SIM to reach out to the servers that can't accept standard credentials? There are a handful of sites where I have inconsistent access or have a double-NAT situation. I may be able to poke a server, but it may not be able to find its way back to the management system. Is there a workaround for this? The certificate configuration for HP SIM seems complicated. What is the preferred setup for trust between systems? I'd also appreciate any notes or recommendations to using this product. Or if there's a better way to do this, I'd like to know.

  Read the article

• hMail server - sending copy of an e-mail changing the sender

  - by Beggycev

  Dear All please help me with following request. I am using hMail server in a company(test.com) and have several hundred of guest e-mail accounts ([email protected]). I need to accomplish this: When any of the guest e-mails receives a message(either from internal or external sender) this e-mail(or its copy) is sent to another address "[email protected]" which is the same for all of these guest e-mails. But I need the sender to be identified as the [email protected] not as the original sender which happens when I use forwarding. I tried to prepare a simple VBS script using the OnAcceptMessage event to accomplish this. and it works on my testing machine without internet connectivity but not in the production environment. To be specific, if I send an e-mail to [email protected] in my test env it is delivered to the [email protected] with [email protected] being a sender. But in the production env the e-mail stays in the guest mailbox with the original sender. I am interested in any solution, using a rule in hMail or script, anything is welcome. Thank you for any help! The script: Sub OnAcceptMessage(oClient, oMessage) 'creating application object in order to perform operations as hMail server administrator Dim obApp Set obApp = CreateObject("hMailServer.Application") Dim adminLogin Dim adminPassword 'Enter actual values for administrator account and password 'CHANGE HERE: adminLogin = "Admin_login" adminPassword = "password" Call obApp.Authenticate(adminLogin, adminPassword) Dim addrStart 'Take first 5 characters of recipients address addrStart = Mid(oMessage.To, 1, 5) 'if the recipient's address start with "guest" if addrStart = "guest" then Dim recipient Dim recipientAddress 'enter name of the recipient and respective e-mail address() 'CHANGE HERE: recipient = "FINAL" recipientAddress = "[email protected]" 'change the sender and sender e-mail address to the guest oMessage.FromAddress = oMessage.To oMessage.From = oMessage.To & "<" & oMessage.To & ">" 'delete recipients and enter a new one - the actual mps and its e-mail from the variables set above oMessage.ClearRecipients() oMessage.AddRecipient recipient, recipientAddress 'save the e-mail oMessage.save end if End Sub

  Read the article

• Postfix installation error on Ubuntu

  - by kgpdeveloper

  How do I fix this error on Ubuntu 10.04 ? Reading package lists... Done Building dependency tree Reading state information... Done postfix is already the newest version. The following packages were automatically installed and are no longer required: libaprutil1-dbd-sqlite3 libcap2 apache2.2-bin libapr1 libaprutil1-ldap libaprutil1 php5-common Use 'apt-get autoremove' to remove them. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up postfix (2.7.0-1) ... Postfix configuration was not changed. If you need to make changes, edit /etc/postfix/main.cf (and others) as needed. To view Postfix configuration values, see postconf(1). After modifying main.cf, be sure to run '/etc/init.d/postfix reload'. Running newaliases newaliases: warning: valid_hostname: numeric hostname: 202002 newaliases: fatal: file /etc/postfix/main.cf: parameter myhostname: bad parameter value: 202002 dpkg: error processing postfix (--configure): subprocess installed post-installation script returned error exit status 75 Processing triggers for libc-bin ... ldconfig deferred processing now taking place Errors were encountered while processing: postfix E: Sub-process /usr/bin/dpkg returned an error code (1) Even if I reboot, the same error shows up. Thanks for the help..

  Read the article

• mysql startup, shtudown and logging on osx

  - by Joelio

  Hi, I am trying to troubleshoot some mysql problems (I have a table I cant seem to delete or drop, it hangs forever) I have 10.5.8 osx, I dont remember how/if I installed mysql, here is what I know: it automatically starts on boot the process looks like this: /usr/local/mysql/libexec/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/var --pid-file=/usr/local/mysql/var/Joels-New-Pro.local.pid _mysql 96 0.0 0.0 75884 684 ?? Ss Sat06PM 0:00.02 /bin/sh /usr/local/mysql/bin/mysqld_safe when I run: /usr/local/mysql/libexec/mysqld --verbose --help it says: /usr/local/mysql/libexec/mysqld Ver 5.0.45 for apple-darwin9.1.0 on i686 (Source distribution) it seems to use my.cnf from /etc/my.cnf Now here are my questions: I dont see anything in the startupitems that remotely looks like mysql ls /Library/StartupItems/ BRESINKx86Monitoring ChmodBPF HP IO HP Trap Monitor Parallels ParallelsTransporter 1.) So how does it startup automatically? 2.) How do I start & stop this type of installation? Also, looking at the config, the logs have no values: /usr/local/mysql/libexec/mysqld --verbose --help|grep '^log' log (No default value) log-bin (No default value) log-bin-index (No default value) log-bin-trust-function-creators FALSE log-bin-trust-routine-creators FALSE log-error log-isam myisam.log log-queries-not-using-indexes FALSE log-short-format FALSE log-slave-updates FALSE log-slow-admin-statements FALSE log-slow-queries (No default value) log-tc tc.log log-tc-size 24576 log-update (No default value) log-warnings 1 3.) Does that mean there is no logging enabled in mysetup? thanks in advance! Joel

  Read the article

• How to setup a virtual host in Ubuntu?

  - by Rade

  I have an app that's accessible via 1.2.3.4/myapp. The app is installed in /var/www/myapp. I've set up a subdomain(apps.mydomain.com) that points to 1.2.3.4. I want the server to point to var/www/myapp if I type apps.mydomain.com/myapp, how do I do that? I have experience creating virtual hosts(lots of them) locally but I'm lost because it's now in production and it's a little different. Here's my virtual host config: <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName apps.mydomain.com/myapp DocumentRoot /var/www/myapp/public <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride All Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Any idea why I still see the files instead of pointing me to the document root? Just in case someone might ask, the app is based on Laravel 4 framework. It's really bad right now because anyone can access the files from the browser.

  Read the article

• Apache 2.2 Present rss http 410 pages as application/rss+xml content type

  - by Mark Bakker

  I have a problem sending http-410 for very old rss feeds. Functional this can happen in one Very old rss feeds where content is not updated anymore / subject could not move to another feed Migration from 3th party site to our site where the rss feed is not longer functional supported I tried several things in my site config see below; <VirtualHost *:80> DocumentRoot /opt/tomcat/webapps/ROOT/ ErrorDocument 500 /error/static/error-500.html ErrorDocument 503 /error/static/error-500.html ErrorDocument 404 /error/static/rss/error-404.html ErrorDocument 410 /error/static/rss/error-410.html # When error pages need to be served by apache, # exclude the files to serve as below (in comment) SetEnvIf Request_URI "/error/static/*" no-jk # force all files to be image/gif: <Location *.rss> #<Location *> #ForceType application/rss+xml </Location> #AddType application/rss+xml .rss #AddType application/rss+xml .xml #AddType application/rss+xml .html JkMount /* rss;use_server_errors=402 # JkMount /* rss RewriteEngine on JkMount /news.rss rss JkMount /documenten-en-publicaties.rss rss RewriteEngine on RewriteRule ^/news.rss$ - [NC,T=application/rss+xml,G,L] RewriteRule ^/documenten-en-publicaties.rss$ - [NC,G,L] # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn ErrorLog "|/usr/bin/logger -s -p local3.err -t 'Apache'" CustomLog "|/usr/bin/logger -s -p local2.info -t 'Apache'" combined ServerSignature Off </VirtualHost> The desired end result should be on /news.rss and /documenten-en-publicaties.rss a 410 page with content in the error page with a content type 'application/rss+xml'

  Read the article

• Windows Image Backup - renamed folder now restore cannot find any backups

  - by Schneider

  A while back I decide to create a couple of Windows Image Backups of my workstation at various points during installation from clean. While doing this I decided to rename the folders containing the VHDs from 'Backup <Date>' to something else of my choosing. I didn't bother testing at the time that the restore still worked. Now I come to use these backups for doing a bare metal restore to a different computer. The problem is restore cannot 'see' any of the backups. So I have deduced that maybe I need to rename them back to the 'Backup <Date>' pattern unfortunately I cannot determine the exact values that would have originally been used here. I have tried by best guest but the images still cannot be found. I have tried doing both a network and a usb hdd restore. No luck on either. P.S. I know I can retrieve files from within the VHDs, the problem is I am trying to save myself time of reinstalling lots of big applications... not trying to recover data.

  Read the article

• stunnel client uses improper SNI when talking to Apache

  - by Huckle

  I have stunnel listening on port 80 and acting as a client connecting to Apache listening on port 443. Configuration is below. What I'm finding is that if I attempt to connect to localhost:80 the connection is fine but if I connect to 127.0.0.1:80 When I check Apache's logs it indicates that stunnel is using localhost as the SNI both times, but the HTTP request lists localhost in one case and 127.0.0.1 in another. Is it possible to tell stunnel to either use whatever is in the HTTP request or to somehow configure two clients each with different SNI values? stunnel.conf: debug = 7 options = NO_SSLv2 [xmlrpc-httpd] client = yes accept = 80 connect = 443 Apache error.log: [error] Hostname localhost provided via SNI and hostname 127.0.0.1 provided via HTTP are different Apache access.log: "GET / HTTP/1.1" 200 2138 "-" "Wget/1.13.4 (linux-gnu)" "GET / HTTP/1.1" 400 743 "-" "Wget/1.13.4 (linux-gnu)" wget: $wget -d localhost ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: localhost Connection: Keep-Alive ---request end--- $wget -d 127.0.0.1 ---request begin--- GET / HTTP/1.1 User-Agent: Wget/1.13.4 (linux-gnu) Accept: */* Host: 127.0.0.1 Connection: Keep-Alive ---request end--- edit: Apache Config Nothing out of the ordinary, it's just a virtual host listening to 443 <VirtualHost *:443>

  Read the article

• Apache2 on Raspbian: Multiviews is enabled but not working [closed]

  - by Christian L

  I recently moved webserver, from a ubuntuserver set up by my brother (I have sudo) to a rasbianserver set up by my self. On the other server multiviews worked out of the box, but on the raspbian it does not seem to work althoug it seems to be enabled out of the box there as well. What I am trying to do is to get it to find my.doma.in/mobile.php when I enter my.doma.in/mobile in the adress field. I am using the same available-site-file as I did before, the file looks as this: <VirtualHost *:80> ServerName my.doma.in ServerAdmin [email protected] DocumentRoot /home/christian/www/do <Directory /> Options FollowSymLinks AllowOverride All </Directory> <Directory /home/christian/www/do> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> From what I have read various places while googling this issue I found that the negotiation module had to be enabled so I tried to enable it. sudo a2enmod negotiation Giving me this result Module negotiation already enabled I have read through the /etc/apache2/apache2.conf and I did not find anything in particular that seemed to be helping me there, but please do ask if you think I should post it. Any ideas on how to solve this through getting Multiviews to work?

  Read the article

• Failed to bring up eth1 in a dual ips solution in ubuntu

  - by lxyu

  I'm using ubuntu 12.04. I tried to assign two ips to two ethernet cards in my server. The content of /etc/network/interfaces is like this: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 114.80.156.a netmask 255.255.255.224 gateway 114.80.156.b auto eth1 iface eth1 inet static address 114.80.156.c netmask 255.255.255.240 gateway 114.80.156.d a b c d have different values, which means the two ips are in different vlans. But I can only bring up eth0 with this command: $ /etc/init.d/networking restart RTNETLINK answers: File exists Failed to bring up eth1. ...done. I have checked the question here which shows the same problem like the one I encountered: Can only bring up one of two interfaces But it seems it's not really solved. And in my situation, I need the 2 ips to use 2 different gateways. So how to fix this problem? Edit1, changed the example config ip from 192.168.0.0/16 subnet to another 'real' subnet. Edit2, the purpose of doing this is fairly simple. Because the ip range I previous in don't have more room for new servers, and I have to move to another ip range. So I want to make the public servers bind to 2 ips for the transition period. I only have really limited knowledge about routing and subnet. @BillThor @rackandboneman, would you please give me some keywords or links on how to setup route for 2 ips? and @Mike Pennington, how do you know I speak chinese?

  Read the article

• apache2 defaultsite redirect but not virtual host

  - by MMM

  I'm trying to set up a new server with several virtual hosts but also such that if the requested fqdn doesn't match a virtual host then the request is redirected to http://example.com/log.php?url=fqdn I have got the default host redirecting as desired however the virtual host that I have defined doesn't work. I'm testing using a different host and curl -I http://hostname.example.com:8080/ on the command line to read the html headers to check for the redirect header directly rather than following it with a browser (to avoid any caching issues). I have defined a virtualhost as the fqdn of the server but when I use curl to request that virtualhost I get redirected. If I request the server by any other name which doesn't have a virtualhost defined I also get redirected. apache version is 2.2.16 on ubuntu The config (concatenated together in order from a couple of different files) is as follows: Listen 8080 NameVirtualHost * <VirtualHost _default_> ServerAdmin [email protected] RewriteEngine On RewriteRule ^(.*)$ http://example.com/log.php?url=%{HTTP_HOST}$1 [R=302,L] </VirtualHost> <VirtualHost *> <Directory "/var/www"> allow from all Options Indexes </Directory> DocumentRoot /var/www ServerName hostname.example.com </VirtualHost> I've also tried ServerName values of hostname.example.com:* and hostname.example.com:8080 In case I wasn't clear enough: anything.anything.any/something requested from my server should redirect to example.com/log.php?url=anything.anything.any/something foo.example.com (not defined as a VirtualHost) requested from my server should redirect to example.com/log.php?url=foo.example.com hostname.example.com (defined as a VirtualHost) requested from my server should return an html document anothername.example.com (also defined as a VirtualHost) requested from my server should return an html document It turns out that because the servers own fqdn is hostname.example.com that gets redirected to the Default VirtualHost even if there is a named VirtualHost for it. Other fqdn's that are not the same as the servers fqdn work as I intended.

  Read the article

• How can I password protect & let cgi-bin to work?

  - by jaaaaaaax

  This is taken from sites-available directory. It's a virtual host setting for apache. Accessing myiphere/cgi-bin/ throws 403. The directory setting for /var/www2/ drwxrwxrwx 8 www-data www-data NameVirtualHost myiphere <VirtualHost myiphere> ServerAdmin webmaster@localhost DocumentRoot /var/www2/ <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www2/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory>

  Read the article

• How do I increase maximum attachment size in Exchange 2007 SP1?

  - by AspNyc

  I've been looking all over for a relatively simple answer to a fairly straightforward question: "how do I increase the maximum size of attachments that can be sent and/or received in Exchange 2007?". But I have yet to find a solution that works. We have a pretty straightforward setup: Exchange 2007 SP1 running on a single server, with the OWA role delegated to a second server. We did a clean install of Exchange 2007 a year or two ago: we did not upgrade from a previous version. I forget if we installed RTM and then patched it to SP1, or if we installed with SP1 already baked in. I just thought I'd mention those items, in case they influence the answer. So far, I've tried running the following Powershell commands on the main Exchange server and verified that they've taken effect: Set-TransportConfig -MaxReceiveSize 40MB Set-ReceiveConnector "RcvConnector" -MaxMessageSize 40MB Set-MaxReceiveSize "MailboxName" -MaxReceiveSize 40MB As of right now, though, the specified mailbox is still rejecting messages over 10MB. You get brownie points if you can also tell me how to set the default mailbox attachment size limits, so that new accounts don't have default Set-MaxReceiveSize values of "unlimited" they currently do. Any advice or suggestions would be greatly appreciated. Tx in advance!

  Read the article

• Change XRDP keyboard layout to en-gb Ubuntu 12.04

  - by Earl Sven

  Does anybody know how to change the keyboard layout to en-gb in an XRDP session on Ubuntu 12.04? I am using mstsc.exe to connect to an XRDP server hosting an XVNC session, however I cannot work out how to apply the UK keyboard layout. A bit of googling has yeilded these instructions which allow me to change the keymap, however using the keymap file I downloaded from here I loose the ability to use the arrow keys, home/end etc. Comparing the file with the standard one there are substantially more differences than I would expect considering the similarity between the layouts. I only have RDP access to the box so i don't seem to be able to actually generate a new layout per the instructions above, maybe it's a local console thing? Also I can't change either the RDP client used or the RDP server as they are my only access to the system, I don't have local console access. I do have root priveleges on the OS however. Any thoughts? Edit: I have found http:// xrdp.sourceforge.net/documents/keymap/newkeymap.html (apologies for not typing the link properly but the antispam filter won't let me post more than 2 links) this documentation on the XRDP sourceforge page which describes keymap file format. It indicates the values in the keymap files are unicode 0x64 etc, however the files I have already on my system seem to use a different format 0:0 or 65307:27 etc, does anybody know what the difference is?

  Read the article

• time sync with ntpd

  - by guthrie

  I run Debian on several systems, and their times do not seem to stay in sync. I can run ntpdate manually, but I thought that I should have an ntpd running that would automate that. I did check with apt and apt-cache but don't find any ntpd (or associated ntpq), not any such names in my system (locate...), but ntp-doc does still describe them. Looking around I see that there is an ntpdate-debian command, and it uses /etc/default/ntpdate for servers (instead of the standard /etc/ntp.conf), but even thought that file is there and has "yes" indicated to use ntp.conf, it fails with "no servers can be used", although ntpdate works fine. Is this just a layer over ntpdate, any reason to use it instead? So, why are they missing, do I need them, how do I automate time updates? Associated, two of my machines are virtualized on a MSoft VM, how is it that their clocks drift, and both to different values? (The underlying Windows machine clock seems stable). I see a few old notes about time & ntp problems on VMware, didn't find anything either current or relating to MSoft VMs. Anything I did see says just to use ntpd, but as above, ...?!

  Read the article

• Using bind (named) as a public proxy server

  - by TrentDavis

  We have a Python DNS server that does a bunch of stuff to figure out values it should return for various DNS records. This works nicely, however as it is Python, the performance under high load won't be great. What I would like to do is have a "proxy" bind server sit in front of it to return results to the public internet. This will cache the results (typically 15 minutes, some records are a few seconds), so the load on the Python server will be greatly reduced as it will only see one look up per domain (only about 100 domains) every 15 minutes. The data in these domains changes a lot, so using a master won't work as it will constantly be changing. I have something setup that looked like it would work great (using a forwarder for the zone), and tested it with dig etc, all going great. However when we went to go live with it, things weren't working, and we figured out that named is not setting the "Authoritative" bit (fair enough, it is a forwarder). So my question is, can we tell bind to set the Authoritative bit for forwarded domains? I have looked at all the doco I can find, and can't find anything about doing things this way. Most of the doco about using it as a proxy if for a LAN to the internet. Ideally I would like to use bind as it is there and installed (CentOS 5 servers). But at a pinch we could look at a different name server to do the work if it just can't be done with bind. Thanks.

  Read the article

• Symbolic link not allowed or link target not accessible

  - by TK Kocheran

  I can't seem to get a symlink working in my Apache VirtualHost, no matter what I try and I see the following error in the error log: Symbolic link not allowed or link target not accessible: /var/www/carddesigner I can browse the actual symlink from Linux with no problems whatsoever: $ ls -l /var/www | grep "carddesigner" lrwxrwxrwx 1 rfkrocktk rfkrocktk 64 2011-02-28 16:52 carddesigner -> /home/rfkrocktk/Documents/Projects/Work/carddesigner/build/main/ Additionally, I've made sure that the my VirtualHost allows the FollowSymLinks option: /etc/apache2/sites-enabled/000-localhost: <VirtualHost 127.0.0.1:80> ServerAdmin ########## DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Deny from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel debug CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> RewriteEngine On RewriteLog "/var/log/apache2/mod_rewrite.log" RewriteLogLevel 9 </VirtualHost> I can't seem to find any other configuration files that seem to override this and/or prevent symlinks from being loaded. Any ideas? Here are my permissions on the actual referenced files: $ ls -l ~/Documents/Projects/Work/carddesigner/build/main total 12 drwxrwxrwx 5 rfkrocktk rfkrocktk 4096 2011-02-28 16:11 advanced drwxrwxrwx 2 rfkrocktk rfkrocktk 4096 2011-02-28 16:10 core drwxrwxrwx 2 rfkrocktk rfkrocktk 4096 2011-02-28 16:10 simple Seems like the permissions are good to go, right?

  Read the article

• What configuration changes can I make to speed up extremely slow Windows VM's in ESXi 4.0.

  - by Shawn Anderson

  I've recently moved from VMWare Server to ESXi 4.0. Running on Dell T310. My VM's have been restored but they are running dog slow compared to VMWare Server. I loaded ESXi 4.0 using only default values. Where are some areas where I can tweak the performance? Even logging onto the VM's can be extremely sluggish. Trying to install software on any of them is a new experience in pain. Dell PowerEdge T310 Xeon X3460 2.80 GHz 32 GB RAM 1 HD (2 TB) I have 16 VM's on this server, but only six or so will be running during my testing. I keep an eye on the Resource Allocation and Performance tabs for the host and I never see CPU or RAM getting anywhere close to pegged. Events tab does show some notices for video RAM issues and some hints on Windows activation issues, but nothing that would point to the sort of sluggishness that I'm experiencing. 1 Windows Server 2008 R2 (64-bit) - 4 GB RAM 1 Windows 7 (32-bit) - 2 GB RAM 1 Vista (32-bit) - 1 GB RAM 3 XP (32-bit) - 1 GB RAM Over to you! Thanks - Shawn

  Read the article

• I am using apache mod rewrie to redirect http to https but now cannot connect to localhost/phpmyadmin

  - by user1787331

  here is my /etc/apache2/sites-enabled/000-default <VirtualHost *:80> ServerAdmin [email protected] RewriteEngine On RewriteCond %{HTTPS} off RewriteRule (.*) https://mysite.com DocumentRoot /var/www/http <Directory /> Options None AllowOverride None </Directory> <Directory /var/www/http> Options -Indexes -FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> Not sure how to fix this. Any thoughts?

  Read the article

• .htaccess error "not allowed here" for all for all instructions

  - by andres descalzo

  I am using Debian Lenny and Apache 2. I changed the default .htaccess file with: AllowOverride AuthConfig But I always get the error message not allowed here when putting any instructions in the .htaccess file. EDIT: file default: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/ <Directory /> Options FollowSymLinks Order allow,deny Allow from all AllowOverride All </Directory> <Directory /var/www/> Options Indexes FollowSymLinks Includes #AllowOverride All #AllowOverride Indexes AuthConfig Limit FileInfo AllowOverride AuthConfig Order allow,deny Allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> .htaccess: #Options +FollowSymlinks # Prevent Directoy listing Options -Indexes # Prevent Direct Access to files <FilesMatch "\.(tpl|ini)"> Order deny,allow Deny from all </FilesMatch> # SEO URL Settings RewriteEngine On RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule ^(.*)\?*$ index.php?_route_=$1 [L,QSA] PHP info: apache2handler Apache Version = Apache/2.2.9 (Debian) PHP/5.2.6-1+lenny10 with Suhosin-Patch Apache API Version = 20051115 Server Administrator = webmaster@localhost Hostname:Port = hw-linux.homework:80 User/Group = www-data(33)/33 Max Requests = Per Child: 0 - Keep Alive: on - Max Per Connection: 100 Timeouts = Connection: 300 - Keep-Alive: 15 Virtual Server = Yes Server Root = /etc/apache2 Loaded Modules = core mod_log_config mod_logio prefork http_core mod_so mod_alias mod_auth_basic mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_deflate mod_dir mod_env mod_mime mod_negotiation mod_php5 mod_rewrite mod_setenvif mod_status

  Read the article

< Previous Page | 657 658 659 660 661 662 663 664 665 666 667 668  | Next Page >