expression evaluation - Page 67

Annoyed by the expression "Moving Forward". Why do people use it? [closed]

- by craig

What does “Moving Forward” mean to you? “Moving Forward”: A.To acknowledge the past but in essence, encourage a positive, professional environment to do our personal best in relation to issue that was criticized. B.To acknowledge the past and learn from case examples to develop continually updated and open sources of information. Specifically, policies and procedures or best practices. C.To dismiss the past to put behind fears of retribution. D.Combination of above choices E._____< Open Answer

Read the article

Is there a more concise regular expression to accomplish this task?

- by mpminnich

First off, sorry for the lame title, but I couldn't think of a better one. I need to test a password to ensure the following: Passwords must contain at least 3 of the following: upper case letters lower case letters numbers special characters Here's what I've come up with (it works, but I'm wondering if there is a better way to do this): Dim lowerCase As New Regex("[a-z]") Dim upperCase As New Regex("[A-Z]") Dim numbers As New Regex("\d") Dim special As New Regex("[\\\.\+\*\?\^\$\[\]\|\{\}\/\'\#]") Dim count As Int16 = 0 If Not lowerCase.IsMatch(txtUpdatepass.Text) Then count += 1 End If If Not upperCase.IsMatch(txtUpdatepass.Text) Then count += 1 End If If Not numbers.IsMatch(txtUpdatepass.Text) Then count += 1 End If If Not special.IsMatch(txtUpdatepass.Text) Then count += 1 End If If at least 3 of the criteria have not been met, I handle it. I'm not well versed in regular expressions and have been reading numerous tutorials on the web. Is there a way to combine all 4 regexes into one? But I guess doing that would not allow me to check if at least 3 of the criteria are met. On a side note, is there a site that has an exhaustive list of all characters that would need to be escaped in the regex (those that have special meaning - eg. $, ^, etc.)? As always, TIA. I can't express enough how awesome I think this site is.

Read the article

how to cut string whit two regular expression "_" and "."

- by Mercer

hello , i have a string like this test_1.doc and i want to split this string to have 1.doc

Read the article

Regular expression to match text that doesn't start with substring?

- by Steven

I have text with file names scattered throughout. The filenames appear in the text like this: |test.txt| |usr01.txt| |usr02.txt| |foo.txt| I want to match the filenames that don't start with usr. I came up with (?<=\|).*\.txt(?=\|) to match the filenames, but it doesn't exclude the ones starting with usr. Is this possible with regular expressions?

Read the article

why can't I call methods on a for-yield expression?

- by 1984isnotamanual

Say I have some scala code like this: // outputs 1, 4, 9, 16, 25, 36, 49, 64, 81, 100 println( squares ) def squares = { val s = for ( count <- 1 to 10 ) yield { count * count } s.mkString(", "); } Why do I have to use the temporary val s? I tried this: def squares = for ( count <- 1 to 10 ) yield { count * count }.mkString(", ") That fails to compile with this error message: error: value mkString is not a member of Int def squares = for ( count <- 1 to 10 ) yield { count * count }.mkString(", ") Shouldn't mkString be called on the collection returned by the for loop?

Read the article

Regular expression, How to allow combination of dot (period) and letters ?

- by politrok

Hi , I want to allow (.) and (a-zA-Z) letters and _ and - , I have some problems with the (.) , Any idea ? Thanks in advance , Ish

Read the article

What is a better way to write this regular expression?

- by rxgx

I am converting XML children into the element parameters and have a dirty regex script I used in Textmate. I know that dot (.) doesn't search for newlines, so this is how I got it to resolve. Search language="(.*)" (.*)<education>(.*)(\n)?(.*)?(\n)?(.*)?(\n)?(.*)?</education> (.*)<years>(.*)</years> (.*)<grade>(.*)</grade> Replace grade="$13" language="$1" years="$11"> <education>$3$4$5$6$7$8$9</education> I know there's a better way to do this. Please help me build my regex skills further.

Read the article

How can I match everything in a string until the second occurrence of a delimiter with a regular expression?

- by Steve

I am trying to refine a preg_match_all by finding the second occurrence of a period then a space: <?php $str = "East Winds 20 knots. Gusts to 25 knots. Waters a moderate chop. Slight chance of showers."; preg_match_all ('/(^)((.|\n)+?)(\.\s{2})/',$str, $matches); $dataarray=$matches[2]; foreach ($dataarray as $value) { echo $value; } ?> But it does not work: the {2} occurrence is incorrect. I have to use preg_match_all because I am scraping dynamic HTML. I want to capture this from the string: East Winds 20 knots. Gusts to 25 knots.

Read the article

I want to create an expression for querystrings, this stuff is hard!

- by jkirkerx

I want to extract some keywords out of a query string for a search application in asp.net. I decoded the url string first, so it's plain text I have this to start with, but I want to add a keyword group I'd like to trim off the stuff for pure words, but not sure if that's possible I also have a long list of possible query string value fields that I want to check against ?q= @q= ?qs= &qs=

Read the article

Is it possible to exclude some elements from parsing when using regular expression and .replace()?

- by Fletus Mefitis

Read the article

How do I pass a conditional expression as a parameter in Ruby?

- by srayhan

For example this what I am trying to do, def method_a(condition, params={}, &block) if condition method_b(params, &block) else yield end end and I am trying to call the method like this, method_a(#{@date > Date.today}, {:param1 => 'value1', :param2 => 'value2'}) do end The result is the condition is always evaluated to true. How do I make it work?

Read the article

Can anybody explain me the meaning of this expression ??

- by de costo

void* GetData() { return reinterpret_cast<unsigned char*>(this); } Is there a case of automatic type coercion happening in this case ??? How could I convert the object of my class to an unsigned char* ??

Read the article

Implementing a generic repository for WCF data services

- by cibrax

The repository implementation I am going to discuss here is not exactly what someone would call repository in terms of DDD, but it is an abstraction layer that becomes handy at the moment of unit testing the code around this repository. In other words, you can easily create a mock to replace the real repository implementation. The WCF Data Services update for .NET 3.5 introduced a nice feature to support two way data bindings, which is very helpful for developing WPF or Silverlight based application but also for implementing the repository I am going to talk about. As part of this feature, the WCF Data Services Client library introduced a new collection DataServiceCollection<T> that implements INotifyPropertyChanged to notify the data context (DataServiceContext) about any change in the association links. This means that it is not longer necessary to manually set or remove the links in the data context when an item is added or removed from a collection. Before having this new collection, you basically used the following code to add a new item to a collection. Order order = new Order { Name = "Foo" }; OrderItem item = new OrderItem { Name = "bar", UnitPrice = 10, Qty = 1 }; var context = new OrderContext(); context.AddToOrders(order); context.AddToOrderItems(item); context.SetLink(item, "Order", order); context.SaveChanges(); Now, thanks to this new collection, everything is much simpler and similar to what you have in other ORMs like Entity Framework or L2S. Order order = new Order { Name = "Foo" }; OrderItem item = new OrderItem { Name = "bar", UnitPrice = 10, Qty = 1 }; order.Items.Add(item); var context = new OrderContext(); context.AddToOrders(order); context.SaveChanges(); In order to use this new feature, you first need to enable V2 in the data service, and then use some specific arguments in the datasvcutil tool (You can find more information about this new feature and how to use it in this post). DataSvcUtil /uri:"http://localhost:3655/MyDataService.svc/" /out:Reference.cs /dataservicecollection /version:2.0 Once you use those two arguments, the generated proxy classes will use DataServiceCollection<T> rather than a simple ObjectCollection<T>, which was the default collection in V1. There are some aspects that you need to know to use this feature correctly. 1. All the entities retrieved directly from the data context with a query track the changes and report those to the data context automatically. 2. A entity created with “new” does not track any change in the properties or associations. In order to enable change tracking in this entity, you need to do the following trick. public Order CreateOrder() { var collection = new DataServiceCollection<Order>(this.context); var order = new Order(); collection.Add(order); return order; } You basically need to create a collection, and add the entity to that collection with the “Add” method to enable change tracking on that entity. 3. If you need to attach an existing entity (For example, if you created the entity with the “new” operator rather than retrieving it from the data context with a query) to a data context for tracking changes, you can use the “Load” method in the DataServiceCollection. var order = new Order { Id = 1 }; var collection = new DataServiceCollection<Order>(this.context); collection.Load(order); In this case, the order with Id = 1 must exist on the data source exposed by the Data service. Otherwise, you will get an error because the entity did not exist. These cool extensions methods discussed by Stuart Leeks in this post to replace all the magic strings in the “Expand” operation with Expression Trees represent another feature I am going to use to implement this generic repository. Thanks to these extension methods, you could replace the following query with magic strings by a piece of code that only uses expressions. Magic strings, var customers = dataContext.Customers .Expand("Orders") .Expand("Orders/Items") Expressions, var customers = dataContext.Customers .Expand(c => c.Orders.SubExpand(o => o.Items)) That query basically returns all the customers with their orders and order items. Ok, now that we have the automatic change tracking support and the expression support for explicitly loading entity associations, we are ready to create the repository. The interface for this repository looks like this,public interface IRepository { T Create<T>() where T : new(); void Update<T>(T entity); void Delete<T>(T entity); IQueryable<T> RetrieveAll<T>(params Expression<Func<T, object>>[] eagerProperties); IQueryable<T> Retrieve<T>(Expression<Func<T, bool>> predicate, params Expression<Func<T, object>>[] eagerProperties); void Attach<T>(T entity); void SaveChanges(); } The Retrieve and RetrieveAll methods are used to execute queries against the data service context. While both methods receive an array of expressions to load associations explicitly, only the Retrieve method receives a predicate representing the “where” clause. The following code represents the final implementation of this repository.public class DataServiceRepository: IRepository { ResourceRepositoryContext context; public DataServiceRepository() : this (new DataServiceContext()) { } public DataServiceRepository(DataServiceContext context) { this.context = context; } private static string ResolveEntitySet(Type type) { var entitySetAttribute = (EntitySetAttribute)type.GetCustomAttributes(typeof(EntitySetAttribute), true).FirstOrDefault(); if (entitySetAttribute != null) return entitySetAttribute.EntitySet; return null; } public T Create<T>() where T : new() { var collection = new DataServiceCollection<T>(this.context); var entity = new T(); collection.Add(entity); return entity; } public void Update<T>(T entity) { this.context.UpdateObject(entity); } public void Delete<T>(T entity) { this.context.DeleteObject(entity); } public void Attach<T>(T entity) { var collection = new DataServiceCollection<T>(this.context); collection.Load(entity); } public IQueryable<T> Retrieve<T>(Expression<Func<T, bool>> predicate, params Expression<Func<T, object>>[] eagerProperties) { var entitySet = ResolveEntitySet(typeof(T)); var query = context.CreateQuery<T>(entitySet); foreach (var e in eagerProperties) { query = query.Expand(e); } return query.Where(predicate); } public IQueryable<T> RetrieveAll<T>(params Expression<Func<T, object>>[] eagerProperties) { var entitySet = ResolveEntitySet(typeof(T)); var query = context.CreateQuery<T>(entitySet); foreach (var e in eagerProperties) { query = query.Expand(e); } return query; } public void SaveChanges() { this.context.SaveChanges(SaveChangesOptions.Batch); } } For instance, you can use the following code to retrieve customers with First name equal to “John”, and all their orders in a single call. repository.Retrieve<Customer>( c => c.FirstName == “John”, //Where c => c.Orders.SubExpand(o => o.Items)); In case, you want to have some pre-defined queries that you are going to use across several places, you can put them in an specific class. public static class CustomerQueries { public static Expression<Func<Customer, bool>> LastNameEqualsTo(string lastName) { return c => c.LastName == lastName; } } And then, use it with the repository. repository.Retrieve<Customer>( CustomerQueries.LastNameEqualsTo("foo"), c => c.Orders.SubExpand(o => o.Items));

Read the article

Investigation: Can different combinations of components effect Dataflow performance?

- by jamiet

Introduction The Dataflow task is one of the core components (if not the core component) of SQL Server Integration Services (SSIS) and often the most misunderstood. This is not surprising, its an incredibly complicated beast and we’re abstracted away from that complexity via some boxes that go yellow red or green and that have some lines drawn between them. Example dataflow In this blog post I intend to look under that facade and get into some of the nuts and bolts of the Dataflow Task by investigating how the decisions we make when building our packages can affect performance. I will do this by comparing the performance of three dataflows that all have the same input, all produce the same output, but which all operate slightly differently by way of having different transformation components. I also want to use this blog post to challenge a common held opinion that I see perpetuated over and over again on the SSIS forum. That is, that people assume adding components to a dataflow will be detrimental to overall performance. Its not surprising that people think this –it is intuitive to think that more components means more work- however this is not a view that I share. I have always been of the opinion that there are many factors affecting dataflow duration and the number of components is actually one of the less important ones; having said that I have never proven that assertion and that is one reason for this investigation. I have actually seen evidence that some people think dataflow duration is simply a function of number of rows and number of components. I’ll happily call that one out as a myth even without any investigation! The Setup I have a 2GB datafile which is a list of 4731904 (~4.7million) customer records with various attributes against them and it contains 2 columns that I am going to use for categorisation: [YearlyIncome] [BirthDate] The data file is a SSIS raw format file which I chose to use because it is the quickest way of getting data into a dataflow and given that I am testing the transformations, not the source or destination adapters, I want to minimise external influences as much as possible. In the test I will split the customers according to month of birth (12 of those) and whether or not their yearly income is above or below 50000 (2 of those); in other words I will be splitting them into 24 discrete categories and in order to do it I shall be using different combinations of SSIS’ Conditional Split and Derived Column transformation components. The 24 datapaths that occur will each input to a rowcount component, again because this is the least resource intensive means of terminating a datapath. The test is being carried out on a Dell XPS Studio laptop with a quad core (8 logical Procs) Intel Core i7 at 1.73GHz and Samsung SSD hard drive. Its running SQL Server 2008 R2 on Windows 7. The Variables Here are the three combinations of components that I am going to test: One Conditional Split - A single Conditional Split component CSPL Split by Month of Birth and income category that will use expressions on [YearlyIncome] & [BirthDate] to send each row to one of 24 outputs. This next screenshot displays the expression logic in use: Derived Column & Conditional Split - A Derived Column component DER Income Category that adds a new column [IncomeCategory] which will contain one of two possible text values {“LessThan50000”,”GreaterThan50000”} and uses [YearlyIncome] to determine which value each row should get. A Conditional Split component CSPL Split by Month of Birth and Income Category then uses that new column in conjunction with [BirthDate] to determine which of the same 24 outputs to send each row to. Put more simply, I am separating the Conditional Split of #1 into a Derived Column and a Conditional Split. The next screenshots display the expression logic in use: DER Income Category CSPL Split by Month of Birth and Income Category Three Conditional Splits - A Conditional Split component that produces two outputs based on [YearlyIncome], one for each Income Category. Each of those outputs will go to a further Conditional Split that splits the input into 12 outputs, one for each month of birth (identical logic in each). In this case then I am separating the single Conditional Split of #1 into three Conditional Split components. The next screenshots display the expression logic in use: CSPL Split by Income Category CSPL Split by Month of Birth 1& 2 Each of these combinations will provide an input to one of the 24 rowcount components, just the same as before. For illustration here is a screenshot of the dataflow containing three Conditional Split components: As you can these dataflows have a fair bit of work to do and remember that they’re doing that work for 4.7million rows. I will execute each dataflow 10 times and use the average for comparison. I foresee three possible outcomes: The dataflow containing just one Conditional Split (i.e. #1) will be quicker There is no significant difference between any of them One of the two dataflows containing multiple transformation components will be quicker Regardless of which of those outcomes come to pass we will have learnt something and that makes this an interesting test to carry out. Note that I will be executing the dataflows using dtexec.exe rather than hitting F5 within BIDS. The Results and Analysis The table below shows all of the executions, 10 for each dataflow. It also shows the average for each along with a standard deviation. All durations are in seconds. I’m pasting a screenshot because I frankly can’t be bothered with the faffing about needed to make a presentable HTML table. It is plain to see from the average that the dataflow containing three conditional splits is significantly faster, the other two taking 43% and 52% longer respectively. This seems strange though, right? Why does the dataflow containing the most components outperform the other two by such a big margin? The answer is actually quite logical when you put some thought into it and I’ll explain that below. Before progressing, a side note. The standard deviation for the “Three Conditional Splits” dataflow is orders of magnitude smaller – indicating that performance for this dataflow can be predicted with much greater confidence too. The Explanation I refer you to the screenshot above that shows how CSPL Split by Month of Birth and salary category in the first dataflow is setup. Observe that there is a case for each combination of Month Of Date and Income Category – 24 in total. These expressions get evaluated in the order that they appear and hence if we assume that Month of Date and Income Category are uniformly distributed in the dataset we can deduce that the expected number of expression evaluations for each row is 12.5 i.e. 1 (the minimum) + 24 (the maximum) divided by 2 = 12.5. Now take a look at the screenshots for the second dataflow. We are doing one expression evaluation in DER Income Category and we have the same 24 cases in CSPL Split by Month of Birth and Income Category as we had before, only the expression differs slightly. In this case then we have 1 + 12.5 = 13.5 expected evaluations for each row – that would account for the slightly longer average execution time for this dataflow. Now onto the third dataflow, the quick one. CSPL Split by Income Category does a maximum of 2 expression evaluations thus the expected number of evaluations per row is 1.5. CSPL Split by Month of Birth 1 & CSPL Split by Month of Birth 2 both have less work to do than the previous Conditional Split components because they only have 12 cases to test for thus the expected number of expression evaluations is 6.5 There are two of them so total expected number of expression evaluations for this dataflow is 6.5 + 6.5 + 1.5 = 14.5. 14.5 is still more than 12.5 & 13.5 though so why is the third dataflow so much quicker? Simple, the conditional expressions in the first two dataflows have two boolean predicates to evaluate – one for Income Category and one for Month of Birth; the expressions in the Conditional Split in the third dataflow however only have one predicate thus they are doing a lot less work. To sum up, the difference in execution times can be attributed to the difference between: MONTH(BirthDate) == 1 && YearlyIncome <= 50000 and MONTH(BirthDate) == 1 In the first two dataflows YearlyIncome <= 50000 gets evaluated an average of 12.5 times for every row whereas in the third dataflow it is evaluated once and once only. Multiply those 11.5 extra operations by 4.7million rows and you get a significant amount of extra CPU cycles – that’s where our duration difference comes from. The Wrap-up The obvious point here is that adding new components to a dataflow isn’t necessarily going to make it go any slower, moreover you may be able to achieve significant improvements by splitting logic over multiple components rather than one. Performance tuning is all about reducing the amount of work that needs to be done and that doesn’t necessarily mean use less components, indeed sometimes you may be able to reduce workload in ways that aren’t immediately obvious as I think I have proven here. Of course there are many variables in play here and your mileage will most definitely vary. I encourage you to download the package and see if you get similar results – let me know in the comments. The package contains all three dataflows plus a fourth dataflow that will create the 2GB raw file for you (you will also need the [AdventureWorksDW2008] sample database from which to source the data); simply disable all dataflows except the one you want to test before executing the package and remember, execute using dtexec, not within BIDS. If you want to explore dataflow performance tuning in more detail then here are some links you might want to check out: Inequality joins, Asynchronous transformations and Lookups Destination Adapter Comparison Don’t turn the dataflow into a cursor SSIS Dataflow – Designing for performance (webinar) Any comments? Let me know! @Jamiet

Read the article

Blending the Sketchflow Action

- by GeekAgilistMercenary

Started a new Sketchflow Prototype in Expression Blend recently and documented each of the steps. This blog entry covers some of those steps, which are the basic elements of any prototype. I will have more information regarding design, prototype creation, and the process of the initial phases for development in the future. For now, I hope you enjoy this short walk through. Also, be sure to check out my last quick entry on Sketchflow. I started off with a Sketchflow Project, just like I did in my previous entry (more specifics in that entry about how to manipulate and build out the Sketchflow Map). Once I created the project I setup the following Sketchflow Map. The CoreNavigation is a ComponentScreen setup solely for the page navigation at the top of the screen. The XAML markup in case you want to create a Component Screen with the same design is included below. <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" xmlns:pb="clr-namespace:Microsoft.Expression.Prototyping.Behavior;assembly=Microsoft.Expression.Prototyping.Interactivity" x:Class="RapidPrototypeSketchScreens.CoreNavigation" d:DesignWidth="624" d:DesignHeight="49" Height="49" Width="624"> <Grid x:Name="LayoutRoot"> <TextBlock HorizontalAlignment="Stretch" Margin="307,3,0,0" Style="{StaticResource TitleCenter-Sketch}" Text="Aütøchart Scorecards" TextWrapping="Wrap"> <i:Interaction.Triggers> <i:EventTrigger EventName="MouseLeftButtonDown"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1"/> </i:EventTrigger> </i:Interaction.Triggers> </TextBlock> <Button HorizontalAlignment="Left" Margin="164,8,0,11" Style="{StaticResource Button-Sketch}" Width="144" Content="Scorecard"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_2"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> <Button HorizontalAlignment="Left" Margin="8,8,0,11" Style="{StaticResource Button-Sketch}" Width="152" Content="Standard Reports"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_1"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> </Grid> </UserControl> Now that the CoreNavigation Component Screen is done I built out each of the others. In each of those screens I included the CoreNavigation Screen (all those little green lines in the image) as the top navigation. In order to do that, as I created each of the pages I would hover over the CoreNavigation Object in the Sketchflow Map. When the utilities drawer (the small menu that pops down under a node when you hover over it) shows click on the third little icon and drag it onto the page node you want a navigation screen on. Once I created all the screens I setup the navigation by opening up each screen and right clicking on the objects that needed to point to somewhere else in the prototype. Once I was done with the main page, my Home Navigation Page, it looked something like this in the Expression Blend Designer. I fleshed out each of the additional screens. Once I was done I wanted to try out the deployment package. The way to deploy a Sketchflow Prototype is to merely click on File –> Package SketchFlow Project and a prompt will appear. In the prompt enter what you want the package to be called. I like to see the files generated afterwards too, so I checked the box to see that. When Expression Blend is done generating everything you’ll have a directory like the one shown below, with all the needed files for deployment. Now these files can be copied or moved to any location for viewing. One can even copy them (such as via FTP) to a server location to share with others. Once they are deployed and you run the "TestPage.html" the other features of the Sketchflow Package are available. In the image below I have tagged a few sections to show the Sketchflow Player Features. To the top left is the navigation, which provides a clearly defined area of movement in a list. To the center right is the actual prototype application. I have placed lists of things and made edits. On the left hand side is the highlight feature, which is available in the Feedback section of the lower left. On the right hand list I underlined the Autochart with an orange marker, and marked out two list items with a red marker. In the lower left hand side in the Feedback section is also an area to type in your feedback. This can be useful for time based feedback, when you post this somewhere and want people to provide subsequent follow up feedback. Overall lots of great features, that enable some fairly rapid prototyping with customers. Once one is familiar with the steps and parts of this Sketchflow Prototype Capabilities it is easy to step through an application without even stopping. It really is that easy. So get hold of Expression Blend 3 and get ramped up on Sketchflow, it will pay off in the design phases to do so! Original Entry

Read the article

MVC 2 Editor Template for Radio Buttons

- by Steve Michelotti

A while back I blogged about how to create an HTML Helper to produce a radio button list. In that post, my HTML helper was “wrapping” the FluentHtml library from MvcContrib to produce the following html output (given an IEnumerable list containing the items “Foo” and “Bar”): 1: <div> 2: <input id="Name_Foo" name="Name" type="radio" value="Foo" /><label for="Name_Foo" id="Name_Foo_Label">Foo</label> 3: <input id="Name_Bar" name="Name" type="radio" value="Bar" /><label for="Name_Bar" id="Name_Bar_Label">Bar</label> 4: </div> With the release of MVC 2, we now have editor templates we can use that rely on metadata to allow us to customize our views appropriately. For example, for the radio buttons above, we want the “id” attribute to be differentiated and unique and we want the “name” attribute to be the same across radio buttons so the buttons will be grouped together and so model binding will work appropriately. We also want the “for” attribute in the <label> element being set to correctly point to the id of the corresponding radio button. The default behavior of the RadioButtonFor() method that comes OOTB with MVC produces the same value for the “id” and “name” attributes so this isn’t exactly what I want out the the box if I’m trying to produce the HTML mark up above. If we use an EditorTemplate, the first gotcha that we run into is that, by default, the templates just work on your view model’s property. But in this case, we *also* was the list of items to populate all the radio buttons. It turns out that the EditorFor() methods do give you a way to pass in additional data. There is an overload of the EditorFor() method where the last parameter allows you to pass an anonymous object for “extra” data that you can use in your view – it gets put on the view data dictionary: 1: <%: Html.EditorFor(m => m.Name, "RadioButtonList", new { selectList = new SelectList(new[] { "Foo", "Bar" }) })%> Now we can create a file called RadioButtonList.ascx that looks like this: 1: <%@ Control Language="C#" Inherits="System.Web.Mvc.ViewUserControl" %> 2: <% 3: var list = this.ViewData["selectList"] as SelectList; 4: %> 5: <div> 6: <% foreach (var item in list) { 7: var radioId = ViewData.TemplateInfo.GetFullHtmlFieldId(item.Value); 8: var checkedAttr = item.Selected ? "checked=\"checked\"" : string.Empty; 9: %> 10: <input type="radio" id="<%: radioId %>" name="<%: ViewData.TemplateInfo.HtmlFieldPrefix %>" value="<%: item.Value %>" <%: checkedAttr %>/> 11: <label for="<%: radioId %>"><%: item.Text %></label> 12: <% } %> 13: </div> There are several things to note about the code above. First, you can see in line #3, it’s getting the SelectList out of the view data dictionary. Then on line #7 it uses the GetFullHtmlFieldId() method from the TemplateInfo class to ensure we get unique IDs. We pass the Value to this method so that it will produce IDs like “Name_Foo” and “Name_Bar” rather than just “Name” which is our property name. However, for the “name” attribute (on line #10) we can just use the normal HtmlFieldPrefix property so that we ensure all radio buttons have the same name which corresponds to the view model’s property name. We also get to leverage the fact the a SelectListItem has a Boolean Selected property so we can set the checkedAttr variable on line #8 and use it on line #10. Finally, it’s trivial to set the correct “for” attribute for the <label> on line #11 since we already produced that value. Because the TemplateInfo class provides all the metadata for our view, we’re able to produce this view that is widely re-usable across our application. In fact, we can create a couple HTML helpers to better encapsulate this call and make it more user friendly: 1: public static MvcHtmlString RadioButtonList<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, params string[] items) 2: { 3: return htmlHelper.RadioButtonList(expression, new SelectList(items)); 4: } 5: 6: public static MvcHtmlString RadioButtonList<TModel, TProperty>(this HtmlHelper<TModel> htmlHelper, Expression<Func<TModel, TProperty>> expression, IEnumerable<SelectListItem> items) 7: { 8: var func = expression.Compile(); 9: var result = func(htmlHelper.ViewData.Model); 10: var list = new SelectList(items, "Value", "Text", result); 11: return htmlHelper.EditorFor(expression, "RadioButtonList", new { selectList = list }); 12: } This allows us to simply the call like this: 1: <%: Html.RadioButtonList(m => m.Name, "Foo", "Bar" ) %> In that example, the values for the radio button are hard-coded and being passed in directly. But if you had a view model that contained a property for the collection of items you could call the second overload like this: 1: <%: Html.RadioButtonList(m => m.Name, Model.FooBarList ) %> The Editor templates introduced in MVC 2 definitely allow for much more flexible views/editors than previously available. By knowing about the features you have available to you with the TemplateInfo class, you can take these concepts and customize your editors with extreme flexibility and re-usability.

Read the article

Entity Framework 4.0 and DDD patterns

- by Voice

Hi everybody I use EntityFramework as ORM and I have simple POCO Domain Model with two base classes that represent Value Object and Entity Object Patterns (Evans). These two patterns is all about equality of two objects, so I overrode Equals and GetHashCode methods. Here are these two classes: public abstract class EntityObject<T>{ protected T _ID = default(T); public T ID { get { return _ID; } protected set { _ID = value; } } public sealed override bool Equals(object obj) { EntityObject<T> compareTo = obj as EntityObject<T>; return (compareTo != null) && ((HasSameNonDefaultIdAs(compareTo) || (IsTransient && compareTo.IsTransient)) && HasSameBusinessSignatureAs(compareTo)); } public virtual void MakeTransient() { _ID = default(T); } public bool IsTransient { get { return _ID == null || _ID.Equals(default(T)); } } public override int GetHashCode() { if (default(T).Equals(_ID)) return 0; return _ID.GetHashCode(); } private bool HasSameBusinessSignatureAs(EntityObject<T> compareTo) { return ToString().Equals(compareTo.ToString()); } private bool HasSameNonDefaultIdAs(EntityObject<T> compareTo) { return (_ID != null && !_ID.Equals(default(T))) && (compareTo._ID != null && !compareTo._ID.Equals(default(T))) && _ID.Equals(compareTo._ID); } public override string ToString() { StringBuilder str = new StringBuilder(); str.Append(" Class: ").Append(GetType().FullName); if (!IsTransient) str.Append(" ID: " + _ID); return str.ToString(); } } public abstract class ValueObject<T, U> : IEquatable<T> where T : ValueObject<T, U> { private static List<PropertyInfo> Properties { get; set; } private static Func<ValueObject<T, U>, PropertyInfo, object[], object> _GetPropValue; static ValueObject() { Properties = new List<PropertyInfo>(); var propParam = Expression.Parameter(typeof(PropertyInfo), "propParam"); var target = Expression.Parameter(typeof(ValueObject<T, U>), "target"); var indexPar = Expression.Parameter(typeof(object[]), "indexPar"); var call = Expression.Call(propParam, typeof(PropertyInfo).GetMethod("GetValue", new[] { typeof(object), typeof(object[]) }), new[] { target, indexPar }); var lambda = Expression.Lambda<Func<ValueObject<T, U>, PropertyInfo, object[], object>>(call, target, propParam, indexPar); _GetPropValue = lambda.Compile(); } public U ID { get; protected set; } public override Boolean Equals(Object obj) { if (ReferenceEquals(null, obj)) return false; if (obj.GetType() != GetType()) return false; return Equals(obj as T); } public Boolean Equals(T other) { if (ReferenceEquals(null, other)) return false; if (ReferenceEquals(this, other)) return true; foreach (var property in Properties) { var oneValue = _GetPropValue(this, property, null); var otherValue = _GetPropValue(other, property, null); if (null == oneValue && null == otherValue) return false; if (false == oneValue.Equals(otherValue)) return false; } return true; } public override Int32 GetHashCode() { var hashCode = 36; foreach (var property in Properties) { var propertyValue = _GetPropValue(this, property, null); if (null == propertyValue) continue; hashCode = hashCode ^ propertyValue.GetHashCode(); } return hashCode; } public override String ToString() { var stringBuilder = new StringBuilder(); foreach (var property in Properties) { var propertyValue = _GetPropValue(this, property, null); if (null == propertyValue) continue; stringBuilder.Append(propertyValue.ToString()); } return stringBuilder.ToString(); } protected static void RegisterProperty(Expression<Func<T, Object>> expression) { MemberExpression memberExpression; if (ExpressionType.Convert == expression.Body.NodeType) { var body = (UnaryExpression)expression.Body; memberExpression = body.Operand as MemberExpression; } else memberExpression = expression.Body as MemberExpression; if (null == memberExpression) throw new InvalidOperationException("InvalidMemberExpression"); Properties.Add(memberExpression.Member as PropertyInfo); } } Everything was OK until I tried to delete some related objects (aggregate root object with two dependent objects which was marked for cascade deletion): I've got an exception "The relationship could not be changed because one or more of the foreign-key properties is non-nullable". I googled this and found http://blog.abodit.com/2010/05/the-relationship-could-not-be-changed-because-one-or-more-of-the-foreign-key-properties-is-non-nullable/ I changed GetHashCode to base.GetHashCode() and error disappeared. But now it breaks all my code: I can't override GetHashCode for my POCO objects = I can't override Equals = I can't implement Value Object and Entity Object patters for my POCO objects. So, I appreciate any solutions, workarounds here etc.

Read the article

Boost Regex unknown number of var

- by Katrin Thielmann

I got a Problem with a regex expression and need help. I have some expressions like these in mein .txt File: 19 = NAND (1, 19) regex expression : http://rubular.com/r/U8rO09bvTO With this regex expression i got seperated matches for the numbers. But now I need a regex expression with a unknown size of numbers in the bracket . For example: 19 = NAND (1, 23, 13, 24) match1: 19 match2: 1 match3: 23 match4: 13 match5: 24 I don't know the number of the numbers. So i need a main expression for min 2 numbers in the bracket till a unknow number. I hope somebody can help me.

Read the article

Linq To SQL - Specified cast is not valid - SingleOrDefault()

- by NullReference

I am trying to do the following... Request request = (from r in db.Requests where r.Status == "Processing" && r.Locked == false select r).SingleOrDefault(); It is throwing the following exception... Message: Specified cast is not valid. StackTrace: at System.Data.Linq.SqlClient.SqlProvider.Execute(Expression query, QueryInfo queryInfo, IObjectReaderFactory factory, Object[] parentArgs, Object[] userArgs, ICompiledSubQuery[] subQueries, Object lastResult) at System.Data.Linq.SqlClient.SqlProvider.ExecuteAll(Expression query, QueryInfo[] queryInfos, IObjectReaderFactory factory, Object[] userArguments, ICompiledSubQuery[] subQueries) at System.Data.Linq.SqlClient.SqlProvider.System.Data.Linq.Provider.IProvider.Execute(Expression query) at System.Data.Linq.DataQuery1.System.Linq.IQueryProvider.Execute[S](Expression expression) at System.Linq.Queryable.SingleOrDefault[TSource](IQueryable1 source) at GDRequestProcessor.Worker.GetNextRequest() Can anyone help me? Thanks in advance!

Read the article

How to convert an object into a double?

- by george t.

I am working on VS C# on the following code, which converts an user input math expression and computes it. MSScriptControl.ScriptControl sc = new MSScriptControl.ScriptControl(); sc.Language = "VBScript"; sc.ExecuteStatement( "function pi\n" + "pi = 3.14159265\n" + "end function"); sc.ExecuteStatement( "function e\n" + "e = exp(1)\n" + "end function"); expression = textBox1.Text.ToString(); expression = expression.Replace("x", i.ToString()); object y = sc.Eval(expression); string k = y.ToString(); double result = double.Parse(k); While this outputs onto the console with the correct result, I want to use the values to make a graph of the function user inputs and it's not doing it correctly. Thank you for your help.

Read the article

Creating an AST node in Erlang

- by dagda1

Hi, I am playing about with Erlang and I am trying to write a simple arithmetic parser. I want to try and parse the following expression: ((12+3)-4) I want to parse the expression into a stack of AST nodes. When parsing this expression, I would first of all create a binary expression for the (12+3) expression which would look something like this in C#: var binaryStructure = new BinaryStructure(); binaryStructure.Left = IntegerLiteralExpression(12); binaryStructure.Right = IntegerLiteralExpression(4); binaryStructure.Operator = binaryExpression.Operator != BinaryOperatorType.Addition; I am quite new to Erlang and I am wondering how I would go about creating a structure like this in Erlang that I can place on a List that I would use as the stack of expressions. Can anyone suggest how to create such a tree like structure? Would a function be a good fit? Thanks Paul

Read the article

Should methods containing LINQ expressions be tested / mocked?

- by Phil.Wheeler

Assuming I have a class with a method that takes a System.Linq.Expressions.Expression as a parameter, how much value is there in unit testing it? public void IEnumerable<T> Find(Expression expression) { return someCollection.Where(expression).ToList(); } Unit testing or mocking these sorts of methods has been a mind-frying experience for me and I'm now at the point where I have to wonder whether it's all just not worth it. How would I unit test this method using some arbitrary expression like List<Animal> = myAnimalRepository.Find(x => x.Species == "Cat");

Read the article

Mule Performing a string manipulation

- by user2910309

What is the best way to perform a string manipulation. I wish to perform a substring on a email address to extract the domain detail and populate this to a variable. a java transformer is a possibilty, but i was hoping if i could use a message enricher with a expression to perform this operation. pardon me but i am still a greenhorn on Mule. here is the excerpt from my mule flow which is failing with error cannot resolve method string length. <enricher target="#[flowVars['FromAddressDomain']]" doc:name="Message Enricher"> <expression-transformer expression="#[ payload.fromAddr.substring(payload.fromAddr.lastIndexOf('@')+ 1,payload.fromAddr.lenth())]" doc:name="Expression"></expression-transformer> </enricher>

Read the article

linq NullReferenceException while checking for null reference

- by Odrade

I have the following LINQ query: List<FileInputItem> inputList = GetInputList(); var results = from FileInputItem f in inputList where ( Path.GetDirectoryName(f.Folder).ToLower().Trim() == somePath || Path.GetDirectoryName(f.Folder).ToLower().Trim() == someOtherPath ) && f.Expression == null select f; Every time this query is executed, it generates a NullReferenceException. If I remove the condition f.Expression == null or change it to f.Expression != null, the query executes normally (giving the wrong results, of course). The relevant bits of FileInputItem look like this: [Serializable] public class FileInputItem { [XmlElement("Folder")] public string Folder { get; set; } [XmlElement("Expression")] public string Expression { get; set; } /*SNIP. Irrelevant properties */ } I'm new to LINQ to objects, so I'm probably missing something fundamental here. What's the deal?

Read the article

LINQ - Select Statement - The null value cannot be assigned to a member with type System.Int32 which

- by thiag0

I am trying to achieve the following... _4S.NJB_Request request = (from r in db.NJB_Requests where r.RequestId == referenceId select r).Take(1).SingleOrDefault(); Getting the following exception... Message: The null value cannot be assigned to a member with type System.Int32 which is a non-nullable value type. StackTrace: at System.Data.Linq.SqlClient.SqlProvider.Execute(Expression query, QueryInfo queryInfo, IObjectReaderFactory factory, Object[] parentArgs, Object[] userArgs, ICompiledSubQuery[] subQueries, Object lastResult) at System.Data.Linq.SqlClient.SqlProvider.ExecuteAll(Expression query, QueryInfo[] queryInfos, IObjectReaderFactory factory, Object[] userArguments, ICompiledSubQuery[] subQueries) at System.Data.Linq.SqlClient.SqlProvider.System.Data.Linq.Provider.IProvider.Execute(Expression query) at System.Data.Linq.DataQuery`1.System.Linq.IQueryProvider.Execute[S](Expression expression) at System.Linq.Queryable.SingleOrDefault[TSource](IQueryable`1 source) at DAL.SqlDataProvider.MarkNJBPCRequestAsComplete(Int32 referenceId, Int32 processState) I have verified that 'referenceId' does have a value. Anyone know why this would happen in a select statement? Thanks!

Search Results

Search found 5154 results on 207 pages for 'expression evaluation'.

Page 67/207 | < Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74 | Next Page >

- by craig

- by mpminnich

- by Mercer

- by Steven

- by 1984isnotamanual

- by politrok

- by rxgx

- by Steve

- by jkirkerx

- by Fletus Mefitis

- by srayhan

- by de costo

- by cibrax

- by jamiet

- by GeekAgilistMercenary

- by Steve Michelotti

- by Voice

- by Katrin Thielmann

- by NullReference

- by george t.

- by dagda1

- by Phil.Wheeler

- by user2910309

- by Odrade

- by thiag0

< Previous Page | 63 64 65 66 67 68 69 70 71 72 73 74 | Next Page >