Search Results

Search found 2043 results on 82 pages for 'collision detection'.

Page 69/82 | < Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >

• RAID-capable 3.5" SATA Drives

  - by nroam

  I recently purchased a pair of 1TB Western Digital WD1002FBYS RE3 drives for use in an external RAID enclosure. I have found that they tend to drop out of the array after a while. Thinking it was the enclosure I tried them on another one but found the same issue. So a bit of googling and I found http://www.tomshardware.com/forum/251076-32-raid-issues-western-digital-hard-disk which suggests that: "WD's "RE" (RAID Edition) HDDs support Time-Limited Error Recovery ("TLER" ): http://www.wdc.com/en/products/productcatalog.asp?language=en As a non-TLER HDD fills up with data, the error detection firmware might take too long, and the RAID controller may drop that HDD from a RAID array." So now I wonder what SATA drives have firmware which is compatible with RAID arrays (esp. RAID 1, 5, but not 0)? I have not been able to come up with the magic set of keywords to ellicit the answer from Google. However, various sites suggest that Seagate & Hitachi are in general OK. Does anyone have any generic (or even specific) guidance on how to work out if a drive's firmware may harbour code that is potentially an issue in a RAID0 setting other than stating that it must be 'enterprise' ready?

  Read the article

• Managed LAMP platform for maximizing availability and global reach, not scalability

  - by user66819

  Assume a Linux/Apache/MySQL/PHP application for a small base of registered users. With small userbase, there are no traffic peaks so the scalability that cloud platforms offer is not imperative. But the system is mission-critical, so availability is the primary goal. Users are also distributed across Asia, Europe, and US, so multiple server locations that minimize users' network hops would be highly desirable. The dream: a managed VPS platform where we would configure a single server (uploading PHP and other files, manipulating database, etc.), and the platform would automatically mirror the server in a handful of key places around the world (say one on each US coast, one in Europe, one in east Asia). File system synchronization and MySQL replication would happen automatically. Core operating system is managed, so we don't need to do full system administration and security, and low-level backups are also done by service provider, though we also do our own backups as well. Couple this with some sort of DNS geo-detection, so users are routed to the nearest operational server... with support for https, of course. Does such a dream exist? If not, what are some approaches to accomplish the same end with minimal time investment and minimal monthly hosting costs?

  Read the article

• grub refuses to install to raid array

  - by ronno

  I have a software raid 0 setup with dual booting Windows 7 and Ubuntu 12.04. The GRUB bootloader that is already on the hard drive seems to work fine. However, since the latest package update for grub, it refuses to install the new version to the hard disk. grub-install throws the following error: /usr/sbin/grub-probe: error: cannot find a GRUB drive for /dev/mapper/< raid name_RAID0p9. Check your device.map. Auto-detection of a filesystem of /dev/mapper/< raid name_RAID0p9 failed. Try with --recheck. If the problem persists please report this together with the output of "/usr/sbin/grub-probe --device-map="/boot/grub/device.map" --target=fs -v /boot/grub" to < [email protected] update-grub pops the same "/usr/sbin/grub-probe: error: cannot find a GRUB drive for /dev/mapper/< raid name_RAID0p9. Check your device.map." every alternate line. I don't understand what exactly is going on. I'm afraid to reinstall the grub package because it might mess up the boot, which currently works fine. Is it safe to just ignore this?

  Read the article

• addEventListener() isn't detecting KEY_UP nor KEY_DOWN

  - by Zirenth

  My full code is import flash.events.KeyboardEvent; import flash.events.Event; //init some variables var speedX = 0; var speedY = 0; msg.visible = false; var curLevel = 2; var level = new Array(); var flagVar; var won = false; //Adding level platforms for(var i = 0; i < numChildren; i++) { if(getChildAt(i) is platform) { level.push(getChildAt(i).getRect(this)); } if(getChildAt(i) is flag) { flagVar = getChildAt(i).getRect(this); } } //Checking key presses var kUp = false; var kDown = false; var kLeft = false; var kRight = false; var kSpace = false; stage.addEventListener(KeyboardEvent.KEY_DOWN, kD); stage.addEventListener(KeyboardEvent.KEY_UP, kU); function kD(k:KeyboardEvent) { trace("Key down - " + k.keyCode); if(k.keyCode == 32) { kSpace = true; } if(k.keyCode == 37 ) { kLeft = true; } if(k.keyCode == 38) { kUp = true; } if(k.keyCode == 39) { kRight = true; } } function kU(k:KeyboardEvent) { trace("Key up - " + k.keyCode); if(k.keyCode == 32) { kSpace = false; } if(k.keyCode == 37) { kLeft = false; } if(k.keyCode == 38) { kUp = false; } if(k.keyCode == 39) { kRight = false; } } addEventListener(Event.ENTER_FRAME, loopAround); function loopAround(e:Event) { //horizontal movement if(kLeft) { speedX = -10; } else if(kRight) { speedX = 10; } else { speedX *= 0.5; } player.x += speedX; //horizontal collision checks for(var i = 0; i < level.length; i++) { if(player.getRect(this).intersects(level[i])) { if(speedX > 0) { player.x = level[i].left - player.width; } if(speedX < 0) { player.x = level[i].right; } speedX = 0; } } //vertical movement speedY += 1; player.y += speedY; var jumpable = false; //Vertical collision for(i = 0; i < level.length; i++) { if(player.getRect(this).intersects(level[i])) { if(speedY > 0) { player.y = level[i].top - player.height; speedY = 0; jumpable = true; } if(speedY < 0) { player.y = level[i].bottom; speedY *= -0.5; } } } //JUMP! if((kUp || kSpace) && jumpable) { speedY=-20; } //Moving camera and other this.x = -player.x + (stage.stageWidth/2); this.y = -player.y + (stage.stageHeight/2); msg.x = player.x - (msg.width/2); msg.y = player.y - (msg.height/2); //Checking win if(player.getRect(this).intersects(flagVar)) { msg.visible = true; won = true; } //Check for next level request if(kSpace && won) { curLevel++; gotoAndStop(curLevel); won = false; } } The section in question is //Checking key presses var kUp = false; var kDown = false; var kLeft = false; var kRight = false; var kSpace = false; stage.addEventListener(KeyboardEvent.KEY_DOWN, kD); stage.addEventListener(KeyboardEvent.KEY_UP, kU); function kD(k:KeyboardEvent) { trace("Key down - " + k.keyCode); if(k.keyCode == 32) { kSpace = true; } if(k.keyCode == 37 ) { kLeft = true; } if(k.keyCode == 38) { kUp = true; } if(k.keyCode == 39) { kRight = true; } } function kU(k:KeyboardEvent) { trace("Key up - " + k.keyCode); if(k.keyCode == 32) { kSpace = false; } if(k.keyCode == 37) { kLeft = false; } if(k.keyCode == 38) { kUp = false; } if(k.keyCode == 39) { kRight = false; } } This was working fine last night, but today I moved it to a new keyframe and now it's not working. I'm not getting any errors (even if I debug). It just won't move the character or even show up in output. I'm still quite new to as3, so I don't really know what to do. Thanks in advance. Edit: After playing with it a bit, I've found out that the reason it's not working is due to the menu. The menu has a single button and two text elements, which are fine. The code that I'm using on the menu is this: import flash.events.MouseEvent; stop(); var format:TextFormat = new TextFormat(); format.size = 26; format.bold = true; playGameButton.setStyle("textFormat", format); stage.addEventListener(MouseEvent.CLICK, playGame); function playGame(e:MouseEvent) { if(e.target.name == "playGameButton") { gotoAndStop(2); } } If I use just gotoAndStop(2); it works fine, but with everything else it just goes to the second frame, and nothing else works after that. Edit #2: I've narrowed it down even farther to the if statement itself. if(e.target == playGameButton) if(e.target.name == "playGameButton") Both of those don't work. If I just remove the if statement all together it works perfectly fine.

  Read the article

• Puppet: is it ok to "force" certname when you expect to shuffle nodes around?

  - by Luke404

  We all know (good example on SF) that Puppet hostname detection could be... fun. At our company (and I guess we're not alone at this) we usually pre-configure servers at our offices and test them before bringing the gear to a remote datacenter and rack them. Of course the reverse dns will change when doing that, even if we don't change the actual hostname of the system. We're slowly drafting our puppet setup and I'd like to be sure those moves won't create problems. My idea is to explicitly configure the desired full FQDN of the system as certname in puppet.conf at server provision time (before the very first puppet run). My process would look something like this: basic o.s. installation basic network configuration, enough to reach the internet and resolve dns install puppet and set up certname start puppet and let him manage the whole configuration test, fix problems in config (via puppet), re-test, and so on... manually stop puppet set up new network configuration for the datacenter network move the machine to DC turn it on puppet should automatically start and keep on doing its job The process is supported by detecting the environment in puppet's manifests (eg. based on subnet, like they do at Wikimedia) and modify configuration as needed (eg. resolv.conf contents appropriate for each network). Each node's certname will never change for the whole system life cycle. Is there any problem with this approach? Could it be improved?

  Read the article

• Linux Centos 6 becomes unavailable from time to time - OS&network issue

  - by adoado0

  I am encountering following problem. There is one server (DL160 G5) running Centos 6.3 with default kernel 2.6.32-220.2.1.el6.x86_64 - at this point I'd like to add that issue appeared also at older version - 6.1 and older kernel (do not remember exactly which version). There is cPanel installed and from time to time it becomes unavailable (network connection). What I've checked is (via KVMoIP): load average is completely normal it does not lack memory or disk space when problem occurs no console notifications checked all access logs and there is no sign that it can be caused by a client script cannot even access local interface (127.0.0.1) or main IP address running tcpdump I can only see packets arriving to server - no responses all services seem to be running properly (mail,sql,http,ssh) checked crontab and all clients' crontabs too network port utilisation is low ( up to several Mbits) arriving packet rate is low - hundreds per second (according to tcpdump) console (via kvmoip) works fine, no lags there is no conntrack at this server there is no ipv6 at this server flushing iptables, unloading modules does not resolve problem restarting network does not resolve problem, no errors appear it also occurs when two sepearate networks are configured (and multiple gateways) as well as one IP, one default gw and one network is configured - so it seems network configuration independent it seems to repeat randomly (load,packet rate,bandwith usage,load independent) checked server with different rootkit detection tools - it seems to be clean server has been rebooted, it did not change anything there are no interface errors it apperas randomly can be once a week or several times per day It usually works fine after 1-15 minutes. What I can also check? It is definitely OS issue - there is traffic at interface only in one direction when problem occurs, can not even ping loopback. Any ideas? Recommended checks? Anything I did not checked above.

  Read the article

• Why is "start in" needed for Windows scheduled tasks?

  - by GomoX

  We develop a web application that can be deployed on Windows or Linux. The Linux implementation uses cron, and the Windows one uses scheduled tasks to run a single PHP script that processes all scheduled tasks for our system. The task is scheduled using schtasks during the install process, like: This has always worked both under W2003 and W2008. A week ago a customer reported that scheduled tasks were not running. He is running on Windows 2008. We checked over and over and finally solved the issue by entering the folder that contains the .vbs script as the "start in" folder for the scheduled task. This said, there is no way to set up the "start in..." value from schtasks without using an XML definition of the tasks. XML definitions don't work in Windows 2003, so I would have to add windows version detection to the installer, additional testing, etc (I'd like to avoid this if at all possible). The only atypical thing I noticed about the install is that the system is installed in D:\ as opposed to the default C:\Program Files (x86)\, but I don't see how this would matter. All the paths are absolute in all the scripts. Can anyone suggest a reasonable solution for this?

  Read the article

• How to fix missing RAID1 drive

  - by Sodved

  I had to do some fiddling about with my cables inside thebox and now I am getting a "Critical Error" about the RAID disks during startup. I have a gigabyte GA-MA770T-UD3 motherboard. Aparently the RAID controller is an AMD SB710 chip. I'm pretty sure I know what happenned. The first time I rebooted I had forgotten the power cable on one of the disks in the RAID1 (mirror) and let it boot up. So I shut down and put the power back in. So now when it boots up I go into the RAID admin interface (between the BIOS screen and the OS loading): it shows the RAID1 as in error the logical device has one disk and says the other is disconnected or missing the other physical disk shows up as a single disk If I boot to the OS (Windows 7 32 bit) the data all seems to be there. If I go into computer management it says my partition is on a disk and working OK. But the other disk is offline because: "The disk is offline because it has a signature collision with another disk that is online" So I am guessing because I STUPIDLY booted up with only one of the disks powered on, the other disk fell out of synch with the mirror and so now cannot rejoin the mirror. How do I fix this? I want to get the RAID1 mirror working again. There does not appear to be any "Repair" option in the basic RAID admin tool which I get into during startup before the OS boots. I have not made any explicit changes to the online one (but I guess the OS has probably written some admin data).

  Read the article

• Create a class that inherets DrawableGameComponent in XNA as a CLASS with custom functions

  - by user3675013

  using Microsoft.Xna.Framework.Graphics; using Microsoft.Xna.Framework.Media; using Microsoft.Xna.Framework; using Microsoft.Xna.Framework.Content; namespace TileEngine { class Renderer : DrawableGameComponent { public Renderer(Game game) : base(game) { } SpriteBatch spriteBatch ; protected override void LoadContent() { base.LoadContent(); } public override void Draw(GameTime gameTime) { base.Draw(gameTime); } public override void Update(GameTime gameTime) { base.Update(gameTime); } public override void Initialize() { base.Initialize(); } public RenderTarget2D new_texture(int width, int height) { Texture2D TEX = new Texture2D(GraphicsDevice, width, height); //create the texture to render to RenderTarget2D Mine = new RenderTarget2D(GraphicsDevice, width, height); GraphicsDevice.SetRenderTarget(Mine); //set the render device to the reference provided //maybe base.draw can be used with spritebatch. Idk. We'll see if the order of operation //works out. Wish I could call base.draw here. return Mine; //I'm hoping that this returns the same instance and not a copy. } public void draw_texture(int width, int height, RenderTarget2D Mine) { GraphicsDevice.SetRenderTarget(null); //Set the renderer to render to the backbuffer again Rectangle drawrect = new Rectangle(0, 0, width, height); //Set the rendering size to what we want spriteBatch.Begin(); //This uses spritebatch to draw the texture directly to the screen spriteBatch.Draw(Mine, drawrect, Color.White); //This uses the color white spriteBatch.End(); //ends the spritebatch //Call base.draw after this since it doesn't seem to recognize inside the function //maybe base.draw can be used with spritebatch. Idk. We'll see if the order of operation //works out. Wish I could call base.draw here. } } } I solved a previous issue where I wasn't allowed to access GraphicsDevice outside the main Default 'main' class Ie "Game" or "Game1" etc. Now I have a new issue. FYi no one told me that it would be possible to use GraphicsDevice References to cause it to not be null by using the drawable class. (hopefully after this last bug is solved it doesn't still return null) Anyways at present the problem is that I can't seem to get it to initialize as an instance in my main program. Ie Renderer tileClipping; and I'm unable to use it such as it is to be noted i haven't even gotten to testing these two steps below but before it compiled but when those functions of this class were called it complained that it can't render to a null device. Which meant that the device wasn't being initialized. I had no idea why. It took me hours to google this. I finally figured out the words I needed.. which were "do my rendering in XNA in a seperate class" now I haven't used the addcomponent function because I don't want it to only run these functions automatically and I want to be able to call the custom ones. In a nutshell what I want is: *access to rendering targets and graphics device OUTSIDE default class *passing of Rendertarget2D (which contain textures and textures should automatically be passed with a rendering target? ) *the device should be passed to this function as well OR the device should be passed to this function as a byproduct of passing the rendertarget (which is automatically associated with the render device it was given originally) *I'm assuming I'm dealing with abstracted pointers here so when I pass a class object or instance, I should be recieving the SAME object , I referenced, and not a copy that has only the lifespan of the function running. *the purpose for all these options: I want to initialize new 2d textures on the fly to customize tileclipping and even the X , y Offsets of where a WHOLE texture will be rendered, and the X and Y offsets of where tiles will be rendered ON that surface. This is why. And I'll be doing region based lighting effects per tile or even per 8X8 pixel spaces.. we'll see I'll also be doing sprite rotations on the whole texture then copying it again to a circular masked texture, and then doing a second copy for only solid tiles for masked rotated collisions on sprites. I'll be checking the masked pixels for my collision, and using raycasting possibly to check for collisions on those areas. The sprite will stay in the center, when this rotation happens. Here is a detailed diagram: http://i.stack.imgur.com/INf9K.gif I'll be using texture2D for steps 4-6 I suppose for steps 1 as well. Now ontop of that, the clipping size (IE the sqaure rendered) will be able to be shrunk or increased, on a per frame basis Therefore I can't use the same static size for my main texture2d and I can't use just the backbuffer Or we get the annoying flicker. Also I will have multiple instances of the renderer class so that I can freely pass textures around as if they are playing cards (in a sense) layering them ontop of eachother, cropping them how i want and such. and then using spritebatch to simply draw them at the locations I want. Hopefully this makes sense, and yes I will be planning on using alpha blending but only after all tiles have been drawn.. The masked collision is important and Yes I am avoiding using math on the tile rendering and instead resorting to image manipulation in video memory which is WHY I need this to work the way I'm intending it to work and not in the default way that XNA seems to handle graphics. Thanks to anyone willing to help. I hate the code form offered, because then I have to rely on static presence of an update function. What if I want to kill that update function or that object, but have it in memory, but just have it temporarily inactive? I'm making the assumption here the update function of one of these gamecomponents is automatic ? Anyways this is as detailed as I can make this post hopefully someone can help me solve the issue. Instead of tell me "derrr don't do it this wayyy" which is what a few people told me (but they don't understand the actual goal I have in mind) I'm trying to create basically a library where I can copy images freely no matter the size, i just have to specify the size in the function then as long as a reference to that object exists it should be kept alive? right? :/ anyways.. Anything else? I Don't know. I understand object oriented coding but I don't understand this XNA It's beggining to feel impossible to do anything custom in it without putting ALL my rendering code into the draw function of the main class tileClipping.new_texture(GraphicsDevice, width, height) tileClipping.Draw_texture(...)

  Read the article

• WebSphere hung threads, how can I track then down?

  - by Puzzled

  We have an application running on WebSphere (unfortunately it is 6.1 which is no longer supported, it has not yet been migrated in production to a later version) which becomes entirely unresponsive because of hung threads. As far as I can tell we entirely exhaust one of the thread pools. I have activated hung thread detection and I get a core/thread dump when hung threads are detected. The server can run for several days without problems but has crashed twice this week. When load the core/thread dump in "IBM Thread and Monitor Dump Analyzer for Java", it tells me that there are a certain number of hung threads (this time it was 2, last time 11) and multiple (usually around 40) threads "waiting on condition" and some running threads. I believe one of the thread pool has around that size (50). Now what I see in there are threads waiting for locks, having locks or in wait. Most of them show a stack track which always ends like this: at java/lang/Object.wait(Native Method) at java/lang/Object.wait(Object.java:231) Now, how can I track this down to either a server configuration problem, application issue, WebSphere problem or something else? How is this supposed to help me track down the problem when almost everything in there refers to IBM code? I cannot ask IBM's help as 6.1 is now an unsupported version of WebSphere and while work has been done to make it work under WebSphere 7 we are not yet ready to switch to it in Production yet.

  Read the article

• Why should you choose Oracle WebLogic 12c instead of JBoss EAP 6?

  - by Ricardo Ferreira

  In this post, I will cover some technical differences between Oracle WebLogic 12c and JBoss EAP 6, which was released a couple days ago from Red Hat. This article claims to help you in the evaluation of key points that you should consider when choosing for an Java EE application server. In the following sections, I will present to you some important aspects that most customers ask us when they are seriously evaluating for an middleware infrastructure, specially if you are considering JBoss for some reason. I would suggest that you keep the following question in mind while you are reading the points: "Why should I choose JBoss instead of WebLogic?" 1) Multi Datacenter Deployment and Clustering - D/R ("Disaster & Recovery") architecture support is embedded on the WebLogic Server 12c product. JBoss EAP 6 on the other hand has no direct D/R support included, Red Hat relies on third-part tools with higher prices. When you consider a middleware solution to host your business critical application, you should worry with every architectural aspect that are related with the solution. Fail-over support is one little aspect of a truly reliable solution. If you do not worry about D/R, your solution will not be reliable. Having said that, with Red Hat and JBoss EAP 6, you have this extra cost that will increase considerably the total cost of ownership of the solution. As we commonly hear from analysts, open-source are not so cheaper when you start seeing the big picture. - WebLogic Server 12c supports advanced LAN clustering, detection of death servers and have a common alert framework. JBoss EAP 6 on the other hand has limited LAN clustering support with no server death detection. They do not generate any alerts when servers goes down (only if you buy JBoss ON which is a separated technology, but until now does not support JBoss EAP 6) and manual intervention are required when servers goes down. In most cases, admin people must rely on "kill -9", "tail -f someFile.log" and "ps ax | grep java" commands to manage failures and clustering anomalies. - WebLogic Server 12c supports the concept of Node Manager, which is a separated process that runs on the physical | virtual servers that allows extend the administration of the cluster to WebLogic managed servers that are often distributed across multiple machines and geographic locations. JBoss EAP 6 on the other hand has no equivalent technology. Whole server instances must be managed individually. - WebLogic Server 12c Node Manager supports Coherence to boost performance when managing servers. JBoss EAP 6 on the other hand has no similar technology. There is no way to coordinate JBoss and infiniband instances provided by JBoss using high throughput and low latency protocols like InfiniBand. The Node Manager feature also allows another very important feature that JBoss EAP lacks: secure the administration. When using WebLogic Node Manager, all the administration tasks are sent to the managed servers in a secure tunel protected by a certificate, which means that the transport layer that separates the WebLogic administration console from the managed servers are secured by SSL. - WebLogic Server 12c are now integrated with OTD ("Oracle Traffic Director") which is a web server technology derived from the former Sun iPlanet Web Server. This software complements the web server support offered by OHS ("Oracle HTTP Server"). Using OTD, WebLogic instances are load-balanced by a high powerful software that knows how to handle SDP ("Socket Direct Protocol") over InfiniBand, which boost performance when used with engineered systems technologies like Oracle Exalogic Elastic Cloud. JBoss EAP 6 on the other hand only offers support to Apache Web Server with custom modules created to deal with JBoss clusters, but only across standard TCP/IP networks.  2) Application and Runtime Diagnostics - WebLogic Server 12c have diagnostics capabilities embedded on the server called WLDF ("WebLogic Diagnostic Framework") so there is no need to rely on third-part tools. JBoss EAP 6 on the other hand has no diagnostics capabilities. Their only diagnostics tool is the log generated by the application server. Admin people are encouraged to analyse thousands of log lines to find out what is going on. - WebLogic Server 12c complement WLDF with JRockit MC ("Mission Control"), which provides to administrators and developers a complete insight about the JVM performance, behavior and possible bottlenecks. WebLogic Server 12c also have an classloader analysis tool embedded, and even a log analyzer tool that enables administrators and developers to view logs of multiple servers at the same time. JBoss EAP 6 on the other hand relies on third-part tools to do something similar. Again, only log searching are offered to find out whats going on. - WebLogic Server 12c offers end-to-end traceability and monitoring available through Oracle EM ("Enterprise Manager"), including monitoring of business transactions that flows through web servers, ESBs, application servers and database servers, all of this with high deep JVM analysis and diagnostics. JBoss EAP 6 on the other hand, even using JBoss ON ("Operations Network"), which is a separated technology, does not support those features. Red Hat relies on third-part tools to provide direct Oracle database traceability across JVMs. One of those tools are Oracle EM for non-Oracle middleware that manage JBoss, Tomcat, Websphere and IIS transparently. - WebLogic Server 12c with their JRockit support offers a tool called JRockit Flight Recorder, which can give developers a complete visibility of a certain period of application production monitoring with zero extra overhead. This automatic recording allows you to deep analyse threads latency, memory leaks, thread contention, resource utilization, stack overflow damages and GC ("Garbage Collection") cycles, to observe in real time stop-the-world phenomenons, generational, reference count and parallel collects and mutator threads analysis. JBoss EAP 6 don't even dream to support something similar, even because they don't have their own JVM. 3) Application Server Administration - WebLogic Server 12c offers a complete administration console complemented with scripting and macro-like recording capabilities. A single WebLogic console can managed up to hundreds of WebLogic servers belonging to the same domain. JBoss EAP 6 on the other hand has a limited console and provides a XML centric administration. JBoss, after ten years, started the development of a rudimentary centralized administration that still leave a lot of administration tasks aside, so admin people and developers must touch scripts and XML configuration files for most advanced and even simple administration tasks. This lead applications to error prone and risky deployments. Even using JBoss ON, JBoss EAP are not able to offer decent administration features for admin people which must be high skilled in JBoss internal architecture and its managing capabilities. - Oracle EM is available to manage multiple domains, databases, application servers, operating systems and virtualization, with a complete end-to-end visibility. JBoss ON does not provide management capabilities across the complete architecture, only basic monitoring. Even deployment must be done aside JBoss ON which does no integrate well with others softwares than JBoss. Until now, JBoss ON does not supports JBoss EAP 6, so even their minimal support for JBoss are not available for JBoss EAP 6 leaving customers uncovered and subject to high skilled JBoss admin people. - WebLogic Server 12c has the same administration model whatever is the topology selected by the customer. JBoss EAP 6 on the other hand differentiates between two operational models: standalone-mode and domain-mode, that are not consistent with each other. Depending on the mode used, the administration skill is different. - WebLogic Server 12c has no point-of-failures processes, and it does not need to define any specialized server. Domain model in WebLogic is available for years (at least ten years or more) and is production proven. JBoss EAP 6 on the other hand needs special processes to garantee JBoss integrity, the PC ("Process-Controller") and the HC ("Host-Controller"). Different from WebLogic, the domain model in JBoss is quite new (one year at tops) of maturity, and need to mature considerably until start doing things like WebLogic domain model does. - WebLogic Server 12c supports parallel deployment model which enables some artifacts being deployed at the same time. JBoss EAP 6 on the other hand does not have any similar feature. Every deployment are done atomically in the containers. This means that if you have a huge EAR (an EAR of 120 MB of size for instance) and deploy onto JBoss EAP 6, this EAR will take some minutes in order to starting accept thread requests. The same EAR deployed onto WebLogic Server 12c will reduce the deployment time at least in 2X compared to JBoss. 4) Support and Upgrades - WebLogic Server 12c has patch management available. JBoss EAP 6 on the other hand has no patch management available, each JBoss EAP instance should be patched manually. To achieve such feature, you need to buy a separated technology called JBoss ON ("Operations Network") that manage this type of stuff. But until now, JBoss ON does not support JBoss EAP 6 so, in practice, JBoss EAP 6 does not have this feature. - WebLogic Server 12c supports previuous WebLogic domains without any reconfiguration since its kernel is robust and mature since its creation in 1995. JBoss EAP 6 on the other hand has a proven lack of supportability between JBoss AS 4, 5, 6 and 7. Different kernels and messaging engines were implemented in JBoss stack in the last five years reveling their incapacity to create a well architected and proven middleware technology. - WebLogic Server 12c has patch prescription based on customer configuration. JBoss EAP 6 on the other hand has no such capability. People need to create ticket supports and have their installations revised by Red Hat support guys to gain some patch prescription from them. - Oracle WebLogic Server independent of the version has 8 years of support of new patches and has lifetime release of existing patches beyond that. JBoss EAP 6 on the other hand provides patches for a specific application server version up to 5 years after the release date. JBoss EAP 4 and previous versions had only 4 years. A good question that Red Hat will argue to answer is: "what happens when you find issues after year 5"?  5) RAC ("Real Application Clusters") Support - WebLogic Server 12c ships with a specific JDBC driver to leverage Oracle RAC clustering capabilities (Fast-Application-Notification, Transaction Affinity, Fast-Connection-Failover, etc). Oracle JDBC thin driver are also available. JBoss EAP 6 on the other hand ships only the standard Oracle JDBC thin driver. Load balancing with Oracle RAC are not supported. Manual intervention in case of planned or unplanned RAC downtime are necessary. In JBoss EAP 6, situation does not reestablish automatically after downtime. - WebLogic Server 12c has a feature called Active GridLink for Oracle RAC which provides up to 3X performance on OLTP applications. This seamless integration between WebLogic and Oracle database enable more value added to critical business applications leveraging their investments in Oracle database technology and Oracle middleware. JBoss EAP 6 on the other hand has no performance gains at all, even when admin people implement some kind of connection-pooling tuning. - WebLogic Server 12c also supports transaction and web session affinity to the Oracle RAC, which provides aditional gains of performance. This is particularly interesting if you are creating a reliable solution that are distributed not only in an LAN cluster, but into a different data center. JBoss EAP 6 on the other hand has no such support. 6) Standards and Technology Support - WebLogic Server 12c is fully Java EE 6 compatible and production ready since december of 2011. JBoss EAP 6 on the other hand became fully compatible with Java EE 6 only in the community version after three months, and production ready only in a few days considering that this article was written in June of 2012. Red Hat says that they are the masters of innovation and technology proliferation, but compared with Oracle and even other proprietary vendors like IBM, they historically speaking are lazy to deliver the most newest technologies and standards adherence. - Oracle is the steward of Java, driving innovation into the platform from commercial and open-source vendors. Red Hat on the other hand does not have its own JVM and relies on third-part JVMs to complete their application server offer. 95% of Red Hat customers are using Oracle HotSpot as JVM, which means that without Oracle involvement, their support are limited exclusively to the application server layer and we all know that most problems are happens in the JVM layer. - WebLogic Server 12c supports natively JDK 7, which empower developers to explore the maximum of the Java platform productivity when writing code. This feature differentiate WebLogic from others application servers (except GlassFish that are also managed by Oracle) because the usage of JDK 7 introduce such remarkable productivity features like the "try-with-resources" enhancement, catching multiple exceptions with one try block, Strings in the switch statements, JVM improvements in terms of JDBC, I/O, networking, security, concurrency and of course, the most important feature of Java 7: native support for multiple non-Java languages. More features regarding JDK 7 can be found here. JBoss EAP 6 on the other hand does not support JDK 7 officially, they comment in their community version that "Java SE 7 can be used with JBoss 7" which does not gives you any guarantees of enterprise support for JDK 7. - Oracle WebLogic Server 12c supports integration with Spring framework allowing Spring applications to use WebLogic special transaction manager, exposing bean interfaces to WebLogic MBeans to take advantage of all WebLogic monitoring and administration advantages. JBoss EAP 6 on the other hand has no special integration with Spring. In fact, Red Hat offers a suspicious package called "JBoss Web Platform" that in theory supports Spring, but in practice this package does not offers any special integration. It is just a facility for Red Hat customers to have support from both JBoss and Spring technology using the same customer support. 7) Lightweight Development - Oracle WebLogic Server 12c and Oracle GlassFish are completely integrated and can share applications without any modifications. Starting with the 12c version, WebLogic now understands natively GlassFish deployment descriptors and specific configurations in order to offer you a truly and reliable migration path from a community Java EE application server to a enterprise middleware product like WebLogic. JBoss EAP 6 on the other hand has no support to natively reuse an existing (or still in development) application from JBoss AS community server. Users of JBoss suffer of critical issues during deployment time that includes: changing the libraries and dependencies of the application, patching the DTD or XSD deployment descriptors, refactoring of the application layers due classloading issues and anomalies, rebuilding of persistence, business and web layers due issues with "usage of the certified version of an certain dependency" or "frameworks that Red Hat potentially does not recommend" etc. If you have the culture or enterprise IT directive of developing Java EE applications using community middleware to in a certain future, transition to enterprise (supported by a vendor) middleware, Oracle WebLogic plus Oracle GlassFish offers you a more sustainable solution. - WebLogic Server 12c has a very light ZIP distribution (less than 165 MB). JBoss EAP 6 ZIP size is around 130 MB, together with JBoss ON you have more 100 MB resulting in a higher download footprint. This is particularly interesting if you plan to use automated setup of application server instances (for example, to rapidly setup a development or staging environment) using Maven or Hudson. - WebLogic Server 12c has a complete integration with Maven allowing developers to setup WebLogic domains with few commands. Tasks like downloading WebLogic, installation, domain creation, data sources deployment are completely integrated. JBoss EAP 6 on the other hand has a limited offer integration with those tools.  - WebLogic Server 12c has a startup mode called WLX that turns-off EJB, JMS and JCA containers leaving enabled only the web container with Java EE 6 web profile. JBoss EAP 6 on the other hand has no such feature, you need to disable manually the containers that you do not want to use. - WebLogic Server 12c supports fastswap, which enables you to change classes without redeployment. This is particularly interesting if you are developing patches for the application that is already deployed and you do not want to redeploy the entire application. This is the same behavior that most application servers offers to JSP pages, but with WebLogic Server 12c, you have the same feature for Java classes in general. JBoss EAP 6 on the other hand has no such support. Even JBoss EAP 5 does not support this until now. 8) JMS and Messaging - WebLogic Server 12c has a proven and high scalable JMS implementation since its initial release in 1995. JBoss EAP 6 on the other hand has a still immature technology called HornetQ, which was introduced in JBoss EAP 5 replacing everything that was implemented in the previous versions. Red Hat loves to introduce new technologies across JBoss versions, playing around with customers and their investments. And when they are asked about why they have changed the implementation and caused such a mess, their answer is always: "the previous implementation was inadequate and not aligned with the community strategy so we are creating a new a improved one". This Red Hat practice leads to uncomfortable investments that in a near future (sometimes less than a year) will be affected in someway. - WebLogic Server 12c has troubleshooting and monitoring features included on the WebLogic console and WLDF. JBoss EAP 6 on the other hand has no direct monitoring on the console, activity is reflected only on the logs, no debug logs available in case of JMS issues. - WebLogic Server 12c has extremely good performance and scalability. JBoss EAP 6 on the other hand has a JMS storage mechanism relying on Oracle database or MySQL. This means that if an issue in production happens and Red Hat affirms that an performance issue is happening due to database problems, they will not support you on the performance issue. They will orient you to call Oracle instead. - WebLogic Server 12c supports messaging enterprise features like SAF ("Store and Forward"), Distributed Queues/Topics and Foreign JMS providers support that leverage JMS implementations without compromise developer code making things completely transparent. JBoss EAP 6 on the other hand do not even dream to support such features. 9) Caching and Grid - Coherence, which is the leading and most mature data grid technology from Oracle, is available since early 2000 and was integrated with WebLogic in 2009. Coherence and WebLogic clusters can be both managed from WebLogic administrative console. Even Node Manager supports Coherence. JBoss on the other hand discontinued JBoss Cache, which was their caching implementation just like they did with the messaging implementation (JBossMQ) which was a issue for long term customers. JBoss EAP 6 ships InfiniSpan version 1.0 which is immature and lack a proven record of successful cases and reliability. - WebLogic Server 12c has a feature called ActiveCache which uses Coherence to, without any code changes, replicate HTTP sessions from both WebLogic and other application servers like JBoss, Tomcat, Websphere, GlassFish and even Microsoft IIS. JBoss EAP 6 on the other hand does have such support and even when they do in the future, they probably will support only their own application server. - Coherence can be used to manage both L1 and L2 cache levels, providing support to Oracle TopLink and others JPA compliant implementations, even Hibernate. JBoss EAP 6 and Infinispan on the other hand supports only Hibernate. And most important of all: Infinispan does not have any successful case of L1 or L2 caching level support using Hibernate, which lead us to reflect about its viability. 10) Performance - WebLogic Server 12c is certified with Oracle Exalogic Elastic Cloud and can run unchanged applications at this engineered system. This approach can benefit customers from Exalogic optimization's of both kernel and JVM layers to boost performance in terms of 10X for web, OLTP, JMS and grid applications. JBoss EAP 6 on the other hand has no investment on engineered systems: customers do not have the choice to deploy on a Java ultra fast system if their project becomes relevant and performance issues are detected. - WebLogic Server 12c maintains a performance gain across each new release: starting on WebLogic 5.1, the overall performance gain has been close to 4X, which close to a 20% gain release by release. JBoss on the other hand does not provide SPECJAppServer or SPECJEnterprise performance benchmarks. Their so called "performance gains" remains hidden in their customer environments, which lead us to think if it is true or not since we will never get access to those environments. - WebLogic Server 12c has industry performance benchmarks with submissions across platforms and configurations leading SPECJ. Oracle WebLogic leads SPECJAppServer performance in multiple categories, fitting all customer topologies like: dual-node, single-node, multi-node and multi-node with RAC. JBoss... again, does not provide any SPECJAppServer performance benchmarks. - WebLogic Server 12c has a feature called work manager which allows your application to embrace new performance levels based on critical resource utilization of the CPUs usage. Work managers prioritizes work and allocates threads based on an execution model that takes into account administrator-defined parameters and actual run-time performance and throughput. JBoss EAP 6 on the other hand has no compared feature and probably they never will. Not supporting such feature like work managers, JBoss EAP 6 forces admin people and specially developers to uncover performance gains in a intrusive way, rewriting the code and doing performance refactorings. 11) Professional Services Support - WebLogic Server 12c and any other technology sold by Oracle give customers the possibility of hire OCS ("Oracle Consulting Services") to manage critical scenarios, deployment assistance of new applications, high skilled consultancy of architecture, best practices and people allocation together with customer teams. All OCS services are available without any restrictions, having the customer bought software from Oracle or just starting their implementation before any acquisition. JBoss EAP 6 or Red Hat to be more specifically, only offers professional services if you buy subscriptions from them. If you are developing a new critical application for your business and need the help of Red Hat for a serious issue or architecture decision, they will probably say: "OK... I can help you but after you buy subscriptions from me". Red Hat also does not allows their professional services consultants to manage environments that uses community based software. They will probably force you to first buy a subscription, download their "enterprise" version and them, optionally hire their consultants. - Oracle provides you our university to educate your team into our technologies, including of course specialized trainings of WebLogic application server. At any time and location, you can hire Oracle to train your team so you get trustful knowledge according to your specific needs. Certifications for the products are also available if your technical people desire to differentiate themselves as professionals. Red Hat on the other hand have a limited pool of resources to train your team in their technologies. Basically they are selling training and certification for RHEL ("Red Hat Enterprise Linux") but if you demand more specialized training in JBoss middleware, they will probably connect you to some "certified" partner localized training since they are apparently discontinuing their education center, at least here in Brazil. They were not able to reproduce their success with RHEL education to their middleware division since they need first sell the subscriptions to after gives you specialized training. And again, they only offer you specialized training based on their enterprise version (EAP in the case of JBoss) which means that the courses will be a quite outdated. There are reports of developers that took official training's from Red Hat at this year (2012) and in a certain JBoss advanced course, Red Hat supposedly covered JBossMQ as the messaging subsystem, and even the printed material provided was based on JBossMQ since the training was created for JBoss EAP 4.3. 12) Encouraging Transparency without Ulterior Motives - WebLogic Server 12c like any other software from Oracle can be downloaded any time from anywhere, you should only possess an OTN ("Oracle Technology Network") credential and you can download any enterprise software how many times you want. And is not some kind of "trial" version. It is the official binaries that will be running for ever in your data center. Oracle does not encourages the usage of "specific versions" of our software. The binaries you buy from Oracle are the same binaries anyone in the world could download and use for testing and personal education. JBoss EAP 6 on the other hand are not available for download unless you buy a subscription and get access to the Red Hat enterprise repositories. If you need to test, learn or just start creating your application using Red Hat's middleware software, you should download it from the community website. You are not allowed to download the enterprise version that, according to Red Hat are more secure, reliable and robust. But no one of us want to start the development of a software with an unsecured, unreliable and not scalable middleware right? So what you do? You are "invited" by Red Hat to buy subscriptions from them to get access to the "cool" version of the software. - WebLogic Server 12c prices are publicly available in the Oracle website. If you want to know right now how much WebLogic will cost to your organization, just click here and get access to our price list. In the case of WebLogic, check out the "US Oracle Technology Commercial Price List". Oracle also encourages you to get in touch with a sales representative to discuss discounts that would make possible the investment into our technology. But you are not required to do this, only if you are interested in buying our technology or maybe you want to discuss some discount scenarios. JBoss EAP 6 on the other hand does not have its cost publicly available in Red Hat's website or in any other media, at least is not so easy to get such information. The only link you will possibly find in their website is a "Contact a Sales Representative" link. This is not a very good relationship between an customer and an vendor. This is not an example of transparency, mainly when the software are sold as open. In this situations, customers expects to see the software prices publicly available, so they can have the chance to decide, based on the existing features of the software, if the cost is fair or not. Conclusion Oracle WebLogic is the most mature, secure, reliable and scalable Java EE application server of the market, and have a proven record of success around the globe to prove it's majority. Don't lose the chance to discover today how WebLogic could fit your needs and sustain your global IT middleware strategy, no matter if your strategy are completely based on the Cloud or not.

  Read the article

• 5 reason why you should upgrade to new iPad (3rd generation)

  - by Gopinath

  Apple released the new iPad, 3rd generation, couple of days ago and they will be available in stores from March 16 onwards.  It’s the best tablet available in the market and for first time buyers it’s a no brainer to choose it. What about the iPad owners? Should they upgrade their iPad 2 to the new iPad? This is the question on the lips of most of the iPad owners. In this post we will provide you 5 reasons why you should upgrade your iPad, if more than two reasons are convincing then you should upgrade to the new iPad. Retina display – The best display ever made for mobile device, a game changer The new iPad comes with Retina display with screen resolution of 2048 x 1536, which is twice the resolution of iPad 2. Undoubtedly the iPad 3’s display is the best display ever made for a mobile device and it’s a game changer. With better resolution on iPad 3 eBook reading is going to be a pleasure with clear and crisp text Watching HD movies on iPad is going to be unbelievably good The new Games targeted for Retina display are going to be more realistic and needless to explain the pleasure of playing such games Graphic artists and photo editors get a professional on screen rendering support to create beautiful graphics 2x Faster & 2x Memory – Better Games and powerful Apps The new iPad is more powerful with 2x faster graphics and 2x more memory. Apple claims that the A5x processor of new iPad is 2x faster than iPad 2 and 4x faster than the best graphic chips available from other vendors. The RAM of  new iPad  is upgraded to 1 GB compared from 512 MB of iPad 2. With the fast processor and more memory, Apps and games are going to be blazing fast. 4G Internet – Browse the web at the speeds of 42 MB/sec Half of the iPad owners are frequent commuters who access internet over cellular networks, the new iPad’s 4G LTE is going to be a big boom for their  high data access needs. With the new iPad’s 4G LTE connectivity you can browse the web at 42 MB/sec and it mean you can watch a HD video without buffering issues. iPad 2 comes with 3G network support and it’s browsing speeds are way less than the new iPad. 5MP Camera – HD Movie Recording & gorgeous Photography iPad 2 has a 0.7 mega pixel camera and the new iPad comes with 5 megapixels camera. That is a huge boost for hobbyist  photographers and videographers. With the new iPad you can shoot gorgeous photos and 1080p HD video. The iSight camera of new iPad uses advanced optics with features like auto exposure, auto focus and face detection up to 10 faces. Amazon Pays up to $300 for old iPad 2 16 GB Wifi and more for other models Do you know that you can trade in your iPad 2 16 GB Wifi for upto $300? Amazon has an excellent trade in program for selling your used iPad 2s. Depending on the condition of the iPad 2  Amazon offers $234, $270, $300.00 for 16 GB Wifi versions that in Acceptable, Good and Like New conditions respectively.  The higher models of iPad 2s fetch you more money. With this great deal from Amazon the amount of extra money you need to spend for new iPad is almost half of their price. Visit Amazon Trade In’s website or read Amazon’s brilliant plan to pay you crazy money for your iPad 2 for more details. Related: New IPad Vs. IPad 2–Side By Side Comparison Of Hardware Specification [Infographic]

  Read the article

• The Beginner’s Guide to Greasemonkey User Scripts in Firefox

  - by Asian Angel

  Everybody knows that Firefox has add-ons for virtually everything, but if you don’t want to bloat your installation you’ve always got the option of Greasemonkey scripts instead. Here’s a quick primer on how to use them. Getting Started with User Scripts Once you have Greasemonkey installed, managing the extension is really easy. Left click on the status bar icon to turn the extension on/off and right click to access the context menu shown here. Whether you use the Options button in the Add-ons Manager Window or the context menu shown above, both will bring up the Manage User Scripts dialog. At the moment you have a nice clean slate to work with… time to get some scripts added in. The majority of user scripts can be found at two different sites, the first being appropriately named userscripts.org, and you can either browse by tag or search for a script. As you can see here your search for a particular type of script can be quickly narrowed down based on category. There is definitely a lot to choose from. For our example we focused on the “textarea” tag. There were 62 scripts available but we quickly found what we were looking for on the first page. Installing, Managing, & Using Your Scripts When you find a script that you want to install visit the script’s homepage and click on the “Install” button. Note: Link for this script provided below. Once you have clicked on the Install button, Greasemonkey will open up the following installation window. You will be able to view: A summary of what the script does A list of websites that the script is supposed to function on (our example is set for all) View the script source if desired Make a final decision on whether to install the script or cancel the process Right-clicking on our status bar icon shows our new script listed and active. Reopening the Manage User Scripts window shows: Our new script listed in the column on the left The websites/pages included An option to disable the script (can also be done in the context menu) The ability to edit the script The ability to uninstall the script If you choose to edit the script you will be asked to browse for and select a default text editor of your choice (first time only). Once you have selected a text editor you can make any changes desired to the script. We decided to test our new user script on the site. Going to the comment box at the bottom we could easily resize the window as desired. The Comment box definitely got a lot bigger. Conclusion If you prefer to keep the number of extensions to a minimum in your Firefox installation then Greasemonkey and the Userscripts website can easily provide that extra functionality without the bloat. For added auto website script detection goodness see our article on Greasefire. Note: See our article here for specialized How-To Geek User Style Scripts that can be added to Greasemonkey. Links Download the Greasemonkey Extension (Mozilla Add-ons) Install the Textarea & Input Resize User Script Visit the Userscripts.org Website Visit the Userstyles.org Website Similar Articles Productive Geek Tips Enjoy How-To Geek User Style Script GoodnessEnable Multi-Column Google Searches with a User ScriptSearch Alternative Search Engines from within Bing’s Search PageFind User Scripts for Your Favorite Websites the Easy WaySet Up User Scripts in Opera Browser TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

  Read the article

• default xna 4.0 gametime don´t works well for 2D physics

  - by EusKoder

  I am developing a game using Visual Studio 2010 and XNA 4.0, after advancing to some extent with the project (a platform based 2d platformer msdn starter kit) I got to test it on different computers with different hardware (CPU, graphics, etc.) and I found that the speed of movement object of the game is quite different, I implemented the PSK physics msdn that are based on time, /// <summary> /// Updates the player's velocity and position based on input, gravity, etc. /// </summary> public void ApplyPhysics(GameTime gameTime) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; Vector2 previousPosition = Position; // Base velocity is a combination of horizontal movement control and // acceleration downward due to gravity. velocity.X += movement * MoveAcceleration * elapsed; velocity.Y = MathHelper.Clamp(velocity.Y + GravityAcceleration * elapsed, -MaxFallSpeed, MaxFallSpeed); velocity.Y = DoJump(velocity.Y, gameTime); // Apply pseudo-drag horizontally. if (IsOnGround) velocity.X *= GroundDragFactor; else velocity.X *= GroundDragFactor; //velocity.X *= AirDragFactor; // Prevent the player from running faster than his top speed. velocity.X = MathHelper.Clamp(velocity.X, -MaxMoveSpeed, MaxMoveSpeed); // Apply velocity. Position += velocity *elapsed; Position = new Vector2((float)Math.Round(Position.X), (float)Math.Round(Position.Y)); // If the player is now colliding with the level, separate them. HandleCollisions(gameTime); // If the collision stopped us from moving, reset the velocity to zero. if (Position.X == previousPosition.X) velocity.X = 0; if (Position.Y == previousPosition.Y) { velocity.Y = 0; jumpTime = 0.0f; } } tested eg with a PC (PC1) 2.13GHz Intel Core 2 6400 / ATI Radeon HD 4670 and another one: (pc2) 3.00GHz Intel Pentium D / Intel 82945G Express Chipset Family by displacement difference (moving x axis at supossed (position = velocity * gametime.ElapsedGameTime.TotalSeconds) constant velocity, for example) is 3 seconds in a total of 20 (example: moving pc1 player sprite 6000 pixels in the x-axis at 20 seconds and pc 2 runs the same distance in 17 ). Tested on a 3rd PC: i72700k / Gigabyte GTX 560 TI the results are even worse, after some time after starting the game gets like 3 times slower and showing the number of pixels in each frame moved in a debug window in the game (counting updatespersecond with counter variable for updates cuantity and gametime for counting a second show 63fps), it appears as if the number is always constant ( refreshments lose the Update method?). In this pc if I put the game in fullscreen during the course of the game, the effect of "go slow" is immediate and restore window mode sometimes yield returns to "normal" and sometimes not. Eventually I began to try a new project to test whether the movement is constant in different pc loading only one sprite and its position value in screen printing. Occur The same. I even tried moving a constant amount of pixels explicitly (position + = 5) and different speeds in different pc quantities of pixels moved in x time. I have the game loop as the default (fixedTimeStep=true;SynchronizeWithVerticalRetrace=true;). I've also tried turning off and creating another timestep as discussed in different post (eg http://gafferongames.com/game-physics/fix-your-timestep/ but i can´t achieve the desired result, move the same number of pixels in X seconds on different computers with windows. All pc used for tests use windows 7 enterprise pc1 == x86 the others are x64. The weirdest thing is that I find information about people describing the same problem and that I wear long nights of searches. Thanks for your help.

  Read the article

• Silverlight Cream for March 25, 2010 -- #820

  - by Dave Campbell

  In this Issue: René Schulte, Jeremy Likness, Hassan, Victor Gaudioso, SilverLaw, Mike Taulty, Phani Raj, Tim Heuer, Christian Schormann, Brad Abrams, David Anson, Diptimaya Patra, and Daniel Vaughan. Shoutouts: Last week, Koen Zwikstra announced Silverlight Spy at MIX10 Anand Iyer announced this for students on the Windows Team Blog: Be a Windows Phone 7 “Rockstar” Justin Angel blogged that Silverlight Isn't Fully Cross-Platform ... let him know if you think it's a yawn or important. On behalf of SilverlightShow, Cigdem Patlak posted MIX10: Laurent Bugnion on Silverlight adoption, WP7 and the EcoContest From SilverlightCream.com: Coding4Fun - Silverlight Real Time Face Detection René Schulte has a Coding 4 Fun article posted on facial recognition. Who better to be manipulating graphics like this than René? Sequential Asynchronous Workflows Part 2: Simplified Jeremy Likness follows up his previous post with another one that is 'simplified'. Remember his previous post began with a post on the Silverlight.net forum and Rob Eisenburg's MVVM presentation from MIX10 Windows Phone 7 Video Tutorial Hassan has a new video up on his AfricanGeek site, and that's a continuation of his previous WP7 video tutorial, adding a listbox and databinding it to the selected index of another listbox. The Los Angeles Silverlight Usergorup will be Streaming its March Meeting LIVE in Silverlight – Tonight! Victor Gaudioso used his Live Streaming knowledge to stream his User Group meeting last night from LA where Michael Washington presented on MVVM followed by Victor himself. That was last night. Today he has a couple of the videos up to view. Shining 3D Font Design - Silverlight 3 SilverLaw has a "Shining 3D Font" tutorial up, and a video on it here: New Video: How to create a 3D effect on a Silverlight 3 Textblock ... this is also available in the Expression Gallery. Silverlight 4 RC – Signing trusted apps with home made certificates Mike Taulty has a post up about building a hand-rolled cert to test out the XAP signing features, and then gives a nod to John Papa with a link to the Silverlight White Paper I've posted about before, because this info is in there as well. Developing a Windows Phone 7 Application that consumes OData Phani Raj has a tutorial up on consuming the NetFlix OData catalog on the WP7 emulator ... now *that* is cool! Make your Silverlight applications Speak to you with Microsoft Translator Tim Heuer used Silverlight to demonstrate Microsoft Translator as a speech synthesis tool using the Speak API included ... pretty cool, Tim ... lots of external links and code. Blend 4: About Path Layout, Sidebar – More About ListBox Than You Ever Wanted To Know Christian Schormann has another outstanding tutorial up on the ListBox and PathLayout in Expression Blend ... just check out the screen shots and you'll wanna read it! Silverlight 4 + RIA Services: Ready for Business: Updating Data in the Client This is the continuation of Brad Abrams' series on WCF RIA Services and is a tutorial on setting up to deal with updating the data. Tip: The CLR wrapper for a DependencyProperty should do its job and nothing more David Anson is posting some "Development Tips", and this is the first ... discussing making sure your DependencyProperty CLR wrapper stays on point... Create and Apply Theme Silverlight Application Diptimaya Patra has a tutorial up on creating and using themes. He states that "Themes are nothing but some predefined styles" ... check it out and see if it's really that easy :) Building a Windows Phone 7 Puzzle Game Daniel Vaughan has a great post up starting with installing all the tools and ending with a maze game for WP7 using XNA for sound... this is the first I've seen that integrates XNA (I think). Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone    MIX10

  Read the article

• How to remove window applet from Gnome3?

  - by Filip Nowak

  I installed today window applet for Gnome3 from this webupd8 post. The effect of the installation shown in the picture. I tried apt-get remove --purge and nothing happens. How do I remove this window applet? http://i.stack.imgur.com/D1s9b.jpg When i try metacity --replace &unity [1] 3171 Checking if settings need to be migrated ...no Checking if internal files need to be migrated ...no Backend : gconf Integration : true Profile : default Adding plugins Skipping upgrade com.canonical.unity.unity.01.upgrade Skipping upgrade com.canonical.unity.unity.02.upgrade Initializing core options...done Initializing bailer options...done Initializing detection options...done Initializing composite options...done Initializing opengl options...done Initializing decor options...done Initializing move options...done Initializing vpswitch options...done Initializing gnomecompat options...done Initializing grid options...done Initializing mousepoll options...done Initializing place options...done Initializing resize options...done Initializing animation options...done Initializing wall options...done Initializing session options...done Initializing workarounds options...done Initializing wobbly options...done compiz (expo) - Warn: failed to bind image to texture Initializing expo options...done Initializing ezoom options...done Initializing staticswitcher options...done Initializing fade options...done Initializing scale options...done Screen geometry changed: 0x0x1920x1080 Initializing unityshell options...done DEBUG 2012-02-19 21:22:40 glib <unknown>:0 Setting to primary screen rect: x=0 y=0 w=1920 h=1080 WARN 2012-02-19 21:22:40 unity.favorites FavoriteStoreGSettings.cpp:138 Unable to load GDesktopAppInfo for 'bluefish.desktop' WARN 2012-02-19 21:22:40 unity.favorites FavoriteStoreGSettings.cpp:138 Unable to load GDesktopAppInfo for 'filezilla.desktop' WARN 2012-02-19 21:22:40 unity.favorites FavoriteStoreGSettings.cpp:138 Unable to load GDesktopAppInfo for 'gimp.desktop' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' WARN 2012-02-19 21:22:40 glib.glib-gobject <unknown>:0 invalid cast from `BamfWindow' to `BamfApplication' Setting Update "texture_filter" Setting Update "sync_to_vblank" Setting Update "fullscreen_visual_bell" Setting Update "panel_opacity" Setting Update "launcher_opacity" Setting Update "icon_size" WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/applications does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/applications does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/commands does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/commands does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/files does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/files does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method InfoRequest proxy /com/canonical/unity/lens/music does not exist WARN 2012-02-19 21:23:32 unity.glib.dbusproxy GLibDBusProxy.cpp:255 Cannot call method SetActive proxy /com/canonical/unity/lens/music does not exist WARN 2012-02-19 21:23:33 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-available.svg: Blad podczas otwierania pliku: Nie ma takiego pliku ani katalogu WARN 2012-02-19 21:23:33 unity.iconloader IconLoader.cpp:509 Unable to load contents of file:///usr/share/icons/unity-icon-theme/places/svg/category-installed.svg: Blad podczas otwierania pliku: Nie ma takiego pliku ani katalogu

  Read the article

• Redirect all access requests to a domain and subdomain(s) except from specific IP address? [closed]

  - by Christopher

  This is a self-answered question... After much wrangling I found the magic combination of mod_rewrite rules so I'm posting here. My scenario is that I have two domains - domain1.com and domain2.com - both of which are currently serving identical content (by way of a global 301 redirect from domain1 to domain2). Domain1 was then chosen to be repurposed to be a 'portal' domain - with a corporate CMS-based site leading off from the front page, and the existing 'retail' domain (domain2) left to serve the main web site. In addition, a staging subdomain was created on domain1 in order to prepare the new corporate site without impinging on the root domain's existing operation. I contemplated just rewriting all requests to domain2 and setting up the new corporate site 'behind the scenes' without using a staging domain, but I usually use subdomains when setting up new sites. Finally, I required access to the 'actual' contents of the domains and subdomains - i.e., to not be redirected like all other visitors - in order that I can develop the new site and test it in the staging environment on the live server, as I'm not using a separate development webserver in this case. I also have another test subdomain on domain1 which needed to be preserved. The way I eventually set it up was as follows: (10.2.2.1 would be my home WAN IP) .htaccess in root of domain1 RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} !^staging.domain1.com$ [NC] RewriteCond %{HTTP_HOST} !^staging2.domain1.com$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301] .htaccess in staging subdomain on domain1: RewriteEngine On RewriteCond %{REMOTE_ADDR} !^10\.2\.2\.1 RewriteCond %{HTTP_HOST} ^staging.revolver.coop$ [NC] RewriteRule ^(.*)$ http://domain2.com/$1 [R=301,L] The multiple .htaccess files and multiple rulesets require more processing overhead and longer iteration as the visitor is potentially redirected twice, however I find it to be a more granular method of control as I can selectively allow more than one IP address access to individual staging subdomain(s) without automatically granting them access to everything else. It also keeps the rulesets fairly simple and easy to read. (or re-interpret, because I'm always forgetting how I put rules together!) If anybody can suggest a more efficient way of merging all these rules and conditions into just one main ruleset in the root of domain1, please post! I'm always keen to learn, this post is more my attempt to preserve this information for those who are looking to redirect entire domains for all visitors except themselves (for design/testing purposes) and not just denying specific file access for maintenance mode (there are many good examples of simple mod_rewrite rules for 'maintenance mode' style operation easily findable via Google). You can also extend the IP address detection - firstly by using wildcards ^10\.2\.2\..*: the last octet's \..* denotes the usual "." and then "zero or more arbitrary characters", signified by the .* - so you can specify specific ranges of IPs in a subnet or entire subnets if you wish. You can also use square brackets: ^10\.2\.[1-255]\.[120-140]; ^10\.2\.[1-9]?[0-9]\.; ^10\.2\.1[0-1][0-9]\. etc. The third way, if you wish to specify multiple discrete IP addresses, is to bracket them in the style of ^(1.1.1.1|2.2.2.2|3.3.3.3)$, and you can of course use square brackets to substitute octets or single digits again. NB: if you're using individual RewriteCond lines to specify multiple IPs / ranges, make sure to put [OR] at the end of each one otherwise mod_rewrite will interpret as "if IP address matches 1.1.1.1 AND if IP address matches 2.2.2.2... which is of course impossible! However as far as I'm aware this isn't necessary if you're using the ! negator to specify "and is not...". Kudos also to SE: this older question also came in useful when I was verifying my own knowledge prior to my futzing around with code. This page was helpful, as were the various other links posted below (can't hyperlink them all due to spam protection... other regex checkers are available). The AddedBytes cheat sheet's useful to pin up on your wall. Other referenced URLs: internetofficer.com/seo-tool/regex-tester/ fantomaster.com/faarticles/rewritingurls.txt internetofficer.com/seo-tool/regex-tester/ addedbytes.com/cheat-sheets/mod_rewrite-cheat-sheet/

  Read the article

• Last GUID used up - new ScottGuID unique ID to replace it

  - by Eilon

  You might have heard in recent news that the last ever GUID was used up. The GUID {FFFFFFFF-FFFF-FFFF-FFFF-FFFFFFFFFFFF} was just consumed by a soon to be released project at Microsoft. Immediately after the GUID's creation the word spread around the Microsoft campuses around the globe. Microsoft's approximately 100,000 worldwide employees then started blogging, tweeting, and facebooking about the dubious "achievement." The following screenshot shows GUIDGEN (the Windows tool for creating GUIDs) with the last ever GUID. All GUIDs created by projects at Microsoft must be registered in a central repository for record keeping. This allows quick-fix engineers, security engineers, anti-malware developers, and testers to do a quick look up of an unknown GUID and find out if it belongs to Microsoft. The following screenshot shows the Microsoft GUID Tracker internal application and the last few GUIDs being used up by various Microsoft projects. What is perhaps more interesting than the news about the GUID is the project that used that last GUID. The recent announcements regarding the development experience for the Windows Phone 7 Series (WP7S) all involve free editions of Visual Studio 2010. One of the lesser known developer tools is based on a resurrected project that many of you are probably familiar with, but have never used. The tool is in fact Microsoft Bob 7 Series (MB7S). MB7S is an agent-based approach for mobile phone app development. The UI incorporates both natural language interfaces and motion gesture behaviors, similar to the Windows Phone 7 Series “Metro” interface. If it works, it will help to expand the breadth of mobile app developers. After the GUID: The ScottGuID It came as no big surprise that eventually the last GUID would be used up. Knowing this, a group of engineers at Microsoft has designed, implemented, and tested a replacement to the GUID: The ScottGuID. There are several core principles of the ScottGuID: 1. The concepts used in ScottGuIDs must be easily understood by a developer who is already familiar with GUIDs 2. There must exist a compatibility layer between ScottGuIDs and GUIDs 3. A ScottGuID must be usable in a practical manner in non-computing environments 4. There must exist ScottGuID APIs for all common platforms: Win32/Win64/WinCE, .NET (incl. Silverlight), Linux, FreeBSD, MacOS (incl. iPhone OS), Symbian, RIM BlackBerry, Google Android, etc. 5. ScottGuIDs must never run out ScottGuID use cases One of the more subtle principles of the ScottGuID is principle #3. While technically a GUID could be used in any environment, it was not practical to do so in terms of data entry and error detection. In order to have the ScottGuID be a true universal ID it must be usable in non-computing environments. Prior to the announcement of the ScottGuID there have been a number of until-now confidential projects. One of the tools that will soon become public is ScottGuIDGen, which is in essence an updated version of GUIDGEN that can create ScottGuIDs. The following screenshot shows a sample ScottGuID. To demonstrate the various applications of the ScottGuID there were test deployments around the globe. The following examples are a small showcase of the applications that have already been prototyped. Log in to Hotmail: Pay for gas: Sign in to Twitter: Dispense cat food: Conclusion I hope that this brief introduction to the ScottGuID shows how technology can continue to move forward, even when it appears there is a point that cannot be passed. With a small number of principles, a team of smart engineers, and a passion for "getting it right" the ScottGuID should last well past our lifetimes. In the coming months expect further announcements regarding additional developer tools, samples, whitepapers, podcasts, and videos. Please leave a comment on this post if you have any questions about the ScottGuID or what you would like to see us do with it. With ScottGuID, the possibilities are nearly endless and we want to stretch their reach as far as possible.

  Read the article

• The most challenging part of blogging about OpenWorld is…

  - by Irem Radzik

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} ...not knowing where to start. Do I talk about the great presentations from our partners and executives in our keynote sessions; do I write about the music festival, or many great sessions we had in the Data integration track? A short blog can never do justice. For now I will stick to our data integration sessions for those who could not attend with so many other sessions running concurrently. And in the coming weeks we will be writing more about what we talked in our sessions and what we learned from our customers and partners. For today, I will give some of the key highlights from Data Integration sessions that took place on Wednesday and Thursday of last week  On Wednesday, GoldenGate was highlighted in multiple Database and Data Integration sessions. I found particularly the session about Oracle’s own use of GoldenGate for its large E-Business Suite implementation for supply chain management and service contract management very interesting. In 2011, Oracle implemented a new operational reporting system using GoldenGate real-time data replication to an operational data store that leverages data from E-Business Suite.The results are very impressive. Data freshness improved by 2,210X while report run performance improved by 60X. For more information on this implementation and its results please see the white paper: Real-Time Operational Reporting for E-Business Suite via GoldenGate Replication to an Operational Data Store Other sessions that provided very rich content were: "Best Practices for Conflict Detection and Resolution in Oracle GoldenGate for Active/Active", "Tuning and Troubleshooting Oracle GoldenGate on Oracle Database", "Next-Generation Data Integration on Oracle Exadata" and "Accelerate Oracle Data Integrator with Advanced Features, SOA, Groovy, SDK, and XML". Below is a slide presented by Stephan Haisley in the Tuning and Troubleshooting Oracle GoldenGate session. If you missed them during OpenWorld, I highly recommend downloading the slides. We will continue to blog about these topics and related resources. .

  Read the article

• Using Live Data in Database Development Work

  - by Phil Factor

  Guest Editorial for Simple-Talk Newsletter... in which Phil Factor reacts with some exasperation when coming across a report that a majority of companies were still using financial and personal data for both developing and testing database applications. If you routinely test your development work using real production data that contains personal or financial information, you are probably being irresponsible, and at worst, risking a heavy financial penalty for your company. Surprisingly, over 80% of financial companies still do this. Plenty of data breaches and fraud have happened from the use of real data for testing, and a data breach is a nightmare for any organisation that suffers one. The cost of each data breach averages out at around $7.2 million in the US in notification, escalation, credit monitoring, fines, litigation, legal costs, and lost business due to customer churn, £1.9 million in the UK. 70% of data breaches are done from within the organisation. Real data can be exploited in a number of ways for malicious or criminal purposes. It isn't just the obvious use of items such as name and address, date of birth, social security number, and credit card and bank account numbers: Data can be exploited in many subtle ways, so there are excellent reasons to ensure that a high priority is given to the detection and prevention of any data breaches. You'll never successfully guess all the ways that real data can be exploited maliciously, or the ease with which it can be accessed. It would be silly to argue that developers never need access to a copy of the database containing live data. Developers sometimes need to track a bug that can only be replicated on the data from the live database. However, it has to be done in a very restrictive harness. The law makes no distinction between development and production databases when a data breach occurs, so the data has to be held with all appropriate security measures in place. In Europe, the use of personal data for testing requires the explicit consent of the people whose data is being held. There are federal standards such as GLBA, PCI DSS and HIPAA, and most US States have privacy legislation. The task of ensuring compliance and tight security in such circumstances is an expensive and time-consuming overhead. The developer is likely to suffer investigation if a data breach occurs, even if the company manages to stay in business. Ironically, the use of copies of live data isn't usually the most effective way to develop or test your data. Data is usually time-specific and isn't usually current by the time it is used for testing, Existing data doesn't help much for new functionality, and every time the data is refreshed from production, any test data is likely to be overwritten. Also, it is not always going to test all the 'edge' conditions that are likely to flush out bugs. You still have the task of simulating the dynamics of actual usage of the database, and here you have no alternative to creating 'spoofed' data. Because of the complexities of relational data, It used to be that there was no realistic alternative to developing and testing with live data. However, this is no longer the case. Real data can be obfuscated, or it can be created entirely from scratch. The latter process used to be impractical, now that there are plenty of third-party tools to choose from. The process of obfuscation isn't risk free. The process must access the live data, and the success of the obfuscation process has to be carefully monitored. Database data security isn't an exciting topic to you or I, but to a hacker it can be an all-consuming obsession, especially if there is financial or political gain involved. This is not the sort of adversary one would wish for and it is far better to accept, and work with, security restrictions that exist for using live data in database development work, especially when the tools exist to create large realistic database test data that can be better for several aspects of testing.

  Read the article

• How to install chrome autosave extension?

  - by Oguz Can Sertel

  I would like to install chrome autosave plugin on ubuntu. when I try to install it with these steps https://github.com/NV/chrome-devtools-autosave-server , I got some errors... there was not installed node and npm out of box on ubuntu 12.10. So I installed npm and node with these commands. sudo apt-get install npm sudo apt-get install node and I tried to install autosave here is the output: sudo npm install -g autosave npm http GET https://registry.npmjs.org/autosave npm http 304 https://registry.npmjs.org/autosave npm http GET https://registry.npmjs.org/commander npm http 304 https://registry.npmjs.org/commander /usr/local/bin/autosave -> /usr/local/lib/node_modules/autosave/bin/autosave > [email protected] install /usr/local/lib/node_modules/autosave > node ./scripts/install.js npm ERR! error installing [email protected] npm WARN This failure might be due to the use of legacy binary "node" npm WARN For further explanations, please read npm WARN /usr/share/doc/nodejs/README.Debian npm WARN npm ERR! [email protected] install: `node ./scripts/install.js` npm ERR! `sh "-c" "node ./scripts/install.js"` failed with 1 npm ERR! npm ERR! Failed at the [email protected] install script. npm ERR! This is most likely a problem with the autosave package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./scripts/install.js npm ERR! You can get their info via: npm ERR! npm owner ls autosave npm ERR! There is likely additional logging output above. npm ERR! npm ERR! System Linux 3.5.0-17-generic npm ERR! command "/usr/bin/nodejs" "/usr/bin/npm" "install" "-g" "autosave" npm ERR! cwd /home/naczu npm ERR! node -v v0.6.19 npm ERR! npm -v 1.1.4 npm ERR! code ELIFECYCLE npm ERR! message [email protected] install: `node ./scripts/install.js` npm ERR! message `sh "-c" "node ./scripts/install.js"` failed with 1 npm ERR! errno {} npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/naczu/npm-debug.log npm not ok and here is README.debian nodejs for Debian ================= packaged modules ---------------- The global search path for modules is /usr/lib/nodejs Future packages of node modules will use that directory, so it should be used wisely. user modules ------------ Node looks for modules in ./node_modules directory first; please read node#modules documentation carefully for more information. Node does not look for modules in /usr/local/lib/node_modules, where npm put them. Please read npm-link(1) of npm package, to understand how to properly use npm-installed modules in a project. Note that require.paths is not supported in future node versions. See also node(1) for more information about NODE_PATH. nodejs command -------------- The upstream name for the Node.js interpreter command is "node". In Debian the interpreter command has been changed to "nodejs". This was done to prevent a namespace collision: other commands use the same name in their upstreams, such as ax25-node from the "node" package. Scripts calling Node.js as a shell command must be changed to instead use the "nodejs" command.

  Read the article

• Nest reinvents smoke detectors. Introduces smart and talking smoke detector that keeps quite when you wave

  - by Gopinath

  Nest, the leading smart thermostat maker has introduced a smart home device today- Nest Protect, a smart, talking smoke & carbon monoxide detector that can quite when you wave your hand. Less annoyances and more intelligence Smoke detectors are around for hundreds of years and playing a major role in providing safety from fire accidents at home. But the technology of these devices is stale and there is no major innovation for the past several years. With the introduction of Nest Protect, the landscape of smoke detectors is all set to change just like how Nest thermostat redefined the industry two years ago. Nest Protect is internet enabled and equipped with motion- and smoke-detection sensors so that when it starts beeping you can silence it by waving hand instead of doing circus feats to turn off the alarm. Everyone who cooks in a home equipped with smoke detector would know how annoying it is to turn off sensitive smoke detectors that goes off control quite often. Apart from addressing the annoyances of regular smoke detector, Nest Protect has talking capabilities. It can alert users with clear & actionable instructions when it detects a danger. Instead of harsh beeps it actually speak to you so you know what is happening. It will tell you what smoke it has detected and in which room it is detected. Multiple Nest Protects installed in a home can communicate with each other. Lets say that there is a smoke in bed room, the Nest Protect installed in bed room shares this information to all Nest Protects installed in the home and your kitchen device can alert you that there is a smoke in bed room. There is an App for that The internet enabled Nest Protect has an app to view its status and various alerts. When the Protect is running on low battery it alerts you to replace them soon. If there is a smoke at home and you are away, you will get message alerts. The app works on all major smartphones as well as tablets. Auto shuts down gas furnaces/heaters on smoke Apart from forming a network with other Nest Protect devices installed at home, they can also communicate with Nest Thermostat if it is installed. When carbon monoxide is detected it can shut off your gas furnace automatically. Also with the help of motion detectors it improves Nest Thermostat’s auto-away functionality. It looks elegant and costs a lot more than a regular smoke detector Just like Nest Thermostat, Nest Protect is elegant and adorable. You just fall in love with it the moment you see it. It’s another master piece from the designer of Apple’s iPod. All is good with the Nest Protect, except the price!! It costs whooping $129, which is almost 4 times more expensive than the best selling conventional thermostats available at $30. A single bed room apartment would require at least 3 detectors and it costs around $390 to install Nest Protects compared to 90$ required for conventional smoke detectors. Though Nest Thermostat is an expensive one compared to conventional thermostats, it offered great savings through its intelligent auto-away feature. Users were able to able to see returns on their investments. If Nest Protect also can provide good return on investment the it will be very successful.

  Read the article

• Best depth sorting method for a Top Down 2D game using a 3D physics engine

  - by Alic44

  I've spent many days googling this and still have issues with my game engine I'd like to ask about, which I haven't seen addressed before. I think the problem is that my game is an unusual combination of a completely 2D graphical approach using XNA's SpriteBatch, and a completely 3D engine (the amazing BEPU physics engine) with rotation mostly disabled. In essence, my question is similar to this one (the part about "faux 3D"), but the difference is that in my game, the player as well as every other creature is represented by 3D objects, and they can all jump, pick up other objects, and throw them around. What this means is that sorting by one value, such as a Z position (how far north/south a character is on the screen) won't work, because as soon as a smaller creature jumps on top of a larger creature, or a box, and walks backwards, the moment its z value is less than that other creature, it will appear to be behind the object it is actually standing on. I actually originally solved this problem by splitting every object in the game into physics boxes which MUST have a Y height equal to their Z depth. I then based the depth sorting value on the object's y position (how high it is off the ground) PLUS its z position (how far north or south it is on the screen). The problem with this approach is that it requires all moving objects in the game to be split graphically into chunks which match up with a physical box which has its y dimension equal to its z dimension. Which is stupid. So, I got inspired last night to rewrite with a fresh approach. My new method is a little more complex, but I think a little more sane: every object which needs to be sorted by depth in the game exposes the interface IDepthDrawable and is added to a list owned by the DepthDrawer object. IDepthDrawable contains: public interface IDepthDrawable { Rectangle Bounds { get; } //possibly change this to a class if struct copying of the xna Rectangle type becomes an issue DepthDrawShape DepthShape { get; } void Draw(SpriteBatch spriteBatch); } The Bounds Rectangle of each IDepthDrawable object represents the 2D Axis-Aligned Bounding Box it will take up when drawn to the screen. Anything that doesn't intersect the screen will be culled at this stage and the remaining on-screen IDepthDrawables will be Bounds tested for intersections with each other. This is where I get a little less sure of what I'm doing. Each group of collisions will be added to a list or other collection, and each list will sort itself based on its DepthShape property, which will have access to the object-to-be-drawn's physics information. For starting out, lets assume everything in the game is an axis aligned 3D Box shape. Boxes are pretty easy to sort. Something like: if (depthShape1.Back > depthShape2.Front) //if depthShape1 is in front of depthShape2. //depthShape1 goes on top. else if (depthShape1.Bottom > depthShape2.Top) //if depthShape1 is above depthShape2. //depthShape1 goes on top. //if neither of these are true, depthShape2 must be in front or above. So, by sorting draw order by several different factors from the physics engine, I believe I can get a really correct draw order. My question is, is this a good way of going about this, or is there some tried and true, tested way which is completely different and has somehow completely eluded me on the internets? And, if this does seem like a good way to remake my draw order sorting, what's the right sorting algorithm for reordering the Bounds Rectangle collision lists, and how do you deal with a Bounds Rectangle colliding with two different object which don't collide with eachother. I know these are solved problems, but I've only been programming for a year so any specific input here will be greatly appreciated. Thanks for reading this far, ye who made it -- sorry it was so long!

  Read the article

• Oracle EMEA News Digest - May 2014

  - by Steve Walker

  Systems Oracle introduced a technology preview of an OpenStack® distribution that allows Oracle Linux and Oracle VM users to work with the open source cloud software. This provides customers with additional choices and interoperability while taking advantage of the efficiency, performance, scalability, and security of Oracle Linux and Oracle VM. The distribution is delivered as part of the Oracle Linux and Oracle VM Premier Support offerings, at no additional cost. Oracle plans to work further with the OpenStack community to develop and enhance its enterprise-class capabilities to meet customer demands. Also in the Open Source arena, Oracle announced the general availability of MySQL Fabric. MySQL Fabric provides an integrated system that makes it simpler to manage groups of MySQL databases. It delivers both high availability - via failure detection and failover - and scalability through automated data sharding. Oracle Database, Middleware and Technology The company made two announcements for Oracle Tuxedo, the #1 application server for C, C++, COBOL and Java deployments in private cloud or traditional data center environments. With enhanced management and monitoring features and tighter integration with Oracle technologies, the latest release of Oracle Tuxedo 12c enables organizations to dramatically increase application throughput, while reducing total cost of ownership and time to market for new application development and deployment. Oracle also introduced the latest release of its mainframe application rehosting platform, Oracle Tuxedo ART 12c, to help organizations speed up migration projects and accelerate the adoption of the new environment by current IT staff. It enables organizations to accelerate the rehosting of IBM mainframe applications and greatly enhance management and supportability of the rehosted applications while reducing costs and risk. Applications According to new Oracle studies, B2B and B2C commerce professionals find integrated, omni-channel customer experiences increasingly valuable to their organizations, and are continuing to invest in technologies and digital content strategies to facilitate them. The studies—one for B2B and one for B2C—surveyed e-commerce professionals in business and technology departments from around the world. Although the priorities, success metrics, and technology investments differed between the two groups, customer acquisition and retention emerged as common themes across B2B and B2C. Growing market share and enhancing customer experience are cited as top investment areas for all e-commerce professionals. In product news, Oracle announced the latest release of Oracle Business Intelligence (BI) Applications (version 11.1.1.8.1, in case anyone asks). It includes prebuilt connectors between Oracle Procurement and Spend Analytics and Oracle’s JD Edwards. Additionally, a new Oracle Human Resources Analytics module for developing and maintaining a skilled workforce has been introduced. In use at more than 4,000 companies worldwide, Oracle BI Applications support leading enterprise applications, including Oracle E-Business Suite, Oracle’s PeopleSoft, Oracle's Siebel CRM, Oracle’s JD Edwards EnterpriseOne offering high-performing analytics at a lower cost. Industries For the Communications Industry, Oracle has launched a new release of the Oracle Communications Core Session Manager. This gives CSPs a new way to design, deploy and manage complex networking services and embrace next-generation technology, It provides them with an immediate entry point for  network function virtualization (NFV) efforts, allowing them to realize immediate benefits associated with network virtualization – including increased service agility and improved network resource sharing. And for the Utilities Industry, Oracle is releasing solutions with new business features and enhanced technical architecture that help position utilities for success now and into the future. Oracle has provided new releases for its customer information system,  meter data management system, customer self-service solution and mobile workforce management solution.

  Read the article

• GoldenGate 12c - MySQL Active-Active Replication Setup

  - by Jinyu Wang-Oracle

  Active-active  (also called Master-Master or Bi-Directional) replication captures data changes from two or more systems and replicat the changes to synchronize the data.  Active-Active replication is often needed for high availability, load balancing and scaling out purposes.   Oracle GoldenGate is known to be one of the first and the best replication tool handling active-active replications. As of Oracle GoldenGate 12c, it provides (Refer to Oracle GoldenGate 12.1.2 Documentation - Configuring Oracle GoldenGate for Active-Active High Availability for more information) the followings: Robust loop-back prevention Comprehensive conflict resolution and detection support Heterogeneous support across different database versions and operation systems.  Oracle GoldenGate supports active-active configurations for DB2 on z/OS, LUW, and IBM i, MySQL, Oracle, SQL/MX,SQL Server, Sybase, and Teradata. However, the setup is different from database to database. In this example, I will show you how to setup an active-active data replication between two MySQL database instances. The example setup below is to have active-active replication between MySQL 5.5 and MySQL 5.6 instances and is shown as follows: MySQL 5.5 (Manager Port: 15105)  Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3305 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, PASSWORD mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl REPORTROLLOVER AT 05:30 ON saturday TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15106, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.5.38/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3305 targetdb test, userid root, password mysql sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge REPERROR (DEFAULT, ABEND) REPERROR(1062, IGNORE) map test.TCUSTMER, target test.TCUSTMER,colmap(usedefaults, region_code="region code"); map test.TCUSTORD, target test.TCUSTORD; MySQL 5.6 (Manager Port: 15106) Replicat replicat demorp01 setenv (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') dboptions host oraclelinux6.localdomain, connectionport 3306 targetdb test, userid root, password mysql --assumetargetdefs sourcedefs ./dirdat/replicat/democust.def discardfile ./dirrpt/demprp01.dsc, purge map test.TCUSTMER, target test.TCUSTMER, colmap(usedefaults, "region code"=region_code); map test.TCUSTORD, target test.TCUSTORD; Extract EXTRACT demoex01 SETENV (MYSQL_UNIX_PORT='/home/oracle/software/mysql_5.6.19/data/mysql.sock') DBOPTIONS CONNECTIONPORT 3306 DBOPTIONS HOST oraclelinux6.localdomain SOURCEDB test USERID root, USERID mysql EXTTRAIL ./dirdat/extract/de TRANLOGOPTIONS ALTLOGDEST "/usr/local/mysql56/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl TABLE test.TCUSTMER; TABLE test.TCUSTORD; Pump EXTRACT demopm01 RMTHOST localhost, MGRPORT 15105, COMPRESS, TIMEOUT 30 RMTTRAIL ./dirdat/replicat/ps PASSTHRU TABLE test.TCUSTMER; TABLE test.TCUSTORD; The setup parameters are quite self-explanatory. The key setup is to avoid the replication data  looping. Oracle GoldenGate for MySQL uses the information in the replication checkpoint table to identify the transaction applied by replicats and thus avoid extracting those transactions by Oracle GoldenGate extracts. The example setup in the extract in MySQL 5.5 instance is shown as follows.  TRANLOGOPTIONS ALTLOGDEST "/home/oracle/software/mysql_5.5.38/data/binlog/bin-log.index" FILTERTABLE test.checkpoint_tbl Setting up an active-active replication is often more complicated than this and requires the following additional considerations. I would elaborate on this in the follow-up discussions. 

  Read the article

< Previous Page | 65 66 67 68 69 70 71 72 73 74 75 76  | Next Page >