10 04 - Page 690 - Developer IT

Personal Technology – Laptop Screen Blank – No Post – No BIOS – No Boot

- by Pinal Dave

If your laptop Screen is Blank and there is no POST, BIOS or boot, you can follow the steps mentioned here and there are chances that it will work if there is no hardware failure inside. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Those, who care about how I come up with this not SQL related blog post, here is the very funny true story. If you are a married man, you will know what I am going to describe next. May be you have faced the same situation or at least you feel and understand my situation. My wife’s computer suddenly stops working when she was searching for my daughter’s mathematics worksheets online. While the fatal accident happened with my wife’s computer (which was my loyal computer for over 4 years before she got it), I was working in my home office, fixing a high priority issue (live order’s database was corrupted) with one of the largest eCommerce websites. While I was working on production server where I was fixing database corruption, my wife ran to my home office. Here is how the conversation went: Wife: This computer does not work. I: Restart it. Wife: It does not start. I: What did you do with it? Wife: Nothing, it just stopped working. I: Okey, I will look into it later, working on the very urgent issue. Wife: I was printing my daughter’s worksheet. I: Hm.. Okey. Wife: It was the mathematics worksheet, which you promised you will teach but you never get around to do it, so I am doing it myself. I: Thanks. I appreciate it. I am very busy with this issue as million dollar transaction are not happening as the database got corrupted and … Wife: So what … umm… You mean to say that you care about this customer more than your daughter. You know she got A+ in every other class but in mathematics she got only A. She missed that extra credit question. I: She is only 4, it is okay. Wife: She is 4.5 years old not 4. So you are not going to fix this computer which does not start at all. I think our daughter next time will even get lower grades as her dad is busy fixing something. I: Alright, I give up bring me that computer. Our daughter who was listening everything so far she finally decided to speak up. Daughter: Dad, it is a laptop not computer. I: Yes, sweety get that laptop here and your dad is going to fix the this small issue of million dollar issue later on. I decided to pay attention to my wife’s computer. She was right. No matter what I do, it will not boot up, it will not start, no BIOS, no POST screen. The computer starts for a second but nothing comes up on the screen. The light indicating hard drive comes up for a second and goes off. Nothing happens. I removed every single USB drive from the laptop but it still would not start. It was indeed no fun for me. Finally I remember my days when I was not married and used to study in University of Southern California, Los Angeles. I remembered that I used to have very old second (or maybe third or fourth) hand computer with me. In polite words, I had pre-owned computer and it used to face very similar issues again and again. I had small routine I used to follow to fix my old computer and I had decided to follow the same steps again with this computer. Step 1: Remove the power cord from the laptop Step 2: Remove the battery from the laptop Step 3: Hold power button (keep it pressed) for almost 60 seconds Step 4: Plug power back in laptop Step 5: Start computer and it should just start normally. Step 6: Now shut down Step 7: Insert the battery back in the laptop Step 8: Start laptop again and it should work Note 1: If your laptop does not work after inserting back the memory. Remove the memory and repeat above process. Do not insert the battery back as it is malfunctioning. Note 2: If your screen is faulty or have issues with your hardware (motherboard, screen or anything else) this method will not fix your computer. Once I followed above process, her computer worked. I was very delighted, that now I can go back to solving the problem where millions of transactions were waiting as I was fixing corrupted database and it the current state of the database was in emergency mode. Once I fixed the computer, I looked at my wife and asked. I: Well, now this laptop is back online, can I get guaranteed that she will get A+ in mathematics in this week’s quiz? Wife: Sure, I promise. I: Fantastic. After saying that I started to look at my database corruption and my wife interrupted me again. Wife: Btw, I forgot to tell you. Our daughter had got A in mathematics last week but she had another quiz today and she already have received A+ there. I kept my promise. I looked at her and she started to walk outside room, before I say anything my phone rang. DBA from eCommerce company had called me, as he was wondering why there is no activity from my side in last 10 minutes. DBA: Hey bud, are you still connected. I see um… no activity in last 10 minutes. I: Oh, well, I was just saving the world. I am back now. After two hours I had fixed the database corruption and everything was normal. I was outsmarted by my wife but honestly I still respect and love her the same as she is the one who spends countless hours with our daughter so she does not miss me and I can continue writing blogs and keep on doing technology evangelism. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Humor, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

Read the article

Columnstore Case Study #2: Columnstore faster than SSAS Cube at DevCon Security

- by aspiringgeek

Preamble This is the second in a series of posts documenting big wins encountered using columnstore indexes in SQL Server 2012 & 2014. Many of these can be found in my big deck along with details such as internals, best practices, caveats, etc. The purpose of sharing the case studies in this context is to provide an easy-to-consume quick-reference alternative. See also Columnstore Case Study #1: MSIT SONAR Aggregations Why Columnstore? As stated previously, If we’re looking for a subset of columns from one or a few rows, given the right indexes, SQL Server can do a superlative job of providing an answer. If we’re asking a question which by design needs to hit lots of rows—DW, reporting, aggregations, grouping, scans, etc., SQL Server has never had a good mechanism—until columnstore. Columnstore indexes were introduced in SQL Server 2012. However, they're still largely unknown. Some adoption blockers existed; yet columnstore was nonetheless a game changer for many apps. In SQL Server 2014, potential blockers have been largely removed & they're going to profoundly change the way we interact with our data. The purpose of this series is to share the performance benefits of columnstore & documenting columnstore is a compelling reason to upgrade to SQL Server 2014. The Customer DevCon Security provides home & business security services & has been in business for 135 years. I met DevCon personnel while speaking to the Utah County SQL User Group on 20 February 2012. (Thanks to TJ Belt (b|@tjaybelt) & Ben Miller (b|@DBADuck) for the invitation which serendipitously coincided with the height of ski season.) The App: DevCon Security Reporting: Optimized & Ad Hoc Queries DevCon users interrogate a SQL Server 2012 Analysis Services cube via SSRS. In addition, the SQL Server 2012 relational back end is the target of ad hoc queries; this DW back end is refreshed nightly during a brief maintenance window via conventional table partition switching. SSRS, SSAS, & MDX Conventional relational structures were unable to provide adequate performance for user interaction for the SSRS reports. An SSAS solution was implemented requiring personnel to ramp up technically, including learning enough MDX to satisfy requirements. Ad Hoc Queries Even though the fact table is relatively small—only 22 million rows & 33GB—the table was a typical DW table in terms of its width: 137 columns, any of which could be the target of ad hoc interrogation. As is common in DW reporting scenarios such as this, it is often nearly to optimize for such queries using conventional indexing. DevCon DBAs & developers attended PASS 2012 & were introduced to the marvels of columnstore in a session presented by Klaus Aschenbrenner (b|@Aschenbrenner) The Details Classic vs. columnstore before-&-after metrics are impressive. Scenario Conventional Structures Columnstore Δ SSRS via SSAS 10 - 12 seconds 1 second >10x Ad Hoc 5-7 minutes (300 - 420 seconds) 1 - 2 seconds >100x Here are two charts characterizing this data graphically. The first is a linear representation of Report Duration (in seconds) for Conventional Structures vs. Columnstore Indexes. As is so often the case when we chart such significant deltas, the linear scale doesn’t expose some the dramatically improved values corresponding to the columnstore metrics. Just to make it fair here’s the same data represented logarithmically; yet even here the values corresponding to 1 –2 seconds aren’t visible. The Wins Performance: Even prior to columnstore implementation, at 10 - 12 seconds canned report performance against the SSAS cube was tolerable. Yet the 1 second performance afterward is clearly better. As significant as that is, imagine the user experience re: ad hoc interrogation. The difference between several minutes vs. one or two seconds is a game changer, literally changing the way users interact with their data—no mental context switching, no wondering when the results will appear, no preoccupation with the spinning mind-numbing hurry-up-&-wait indicators. As we’ve commonly found elsewhere, columnstore indexes here provided performance improvements of one, two, or more orders of magnitude. Simplified Infrastructure: Because in this case a nonclustered columnstore index on a conventional DW table was faster than an Analysis Services cube, the entire SSAS infrastructure was rendered superfluous & was retired. PASS Rocks: Once again, the value of attending PASS is proven out. The trip to Charlotte combined with eager & enquiring minds let directly to this success story. Find out more about the next PASS Summit here, hosted this year in Seattle on November 4 - 7, 2014. DevCon BI Team Lead Nathan Allan provided this unsolicited feedback: “What we found was pretty awesome. It has been a game changer for us in terms of the flexibility we can offer people that would like to get to the data in different ways.” Summary For DW, reports, & other BI workloads, columnstore often provides significant performance enhancements relative to conventional indexing. I have documented here, the second in a series of reports on columnstore implementations, results from DevCon Security, a live customer production app for which performance increased by factors of from 10x to 100x for all report queries, including canned queries as well as reducing time for results for ad hoc queries from 5 - 7 minutes to 1 - 2 seconds. As a result of columnstore performance, the customer retired their SSAS infrastructure. I invite you to consider leveraging columnstore in your own environment. Let me know if you have any questions.

Read the article

projection / view matrix: the object is bigger than it should and depth does not affect vertices

- by Francesco Noferi

I'm currently trying to write a C 3D software rendering engine from scratch just for fun and to have an insight on what OpenGL does behind the scene and what 90's programmers had to do on DOS. I have written my own matrix library and tested it without noticing any issues, but when I tried projecting the vertices of a simple 2x2 cube at 0,0 as seen by a basic camera at 0,0,10, the cube seems to appear way bigger than the application's window. If I scale the vertices' coordinates down by 8 times I can see a proper cube centered on the screen. This cube doesn't seem to be in perspective: wheen seen from the front, the back vertices pe rfectly overlap with the front ones, so I'm quite sure it's not correct. this is how I create the view and projection matrices (vec4_initd initializes the vectors with w=0, vec4_initw initializes the vectors with w=1): void mat4_lookatlh(mat4 *m, const vec4 *pos, const vec4 *target, const vec4 *updirection) { vec4 fwd, right, up; // fwd = norm(pos - target) fwd = *target; vec4_sub(&fwd, pos); vec4_norm(&fwd); // right = norm(cross(updirection, fwd)) vec4_cross(updirection, &fwd, &right); vec4_norm(&right); // up = cross(right, forward) vec4_cross(&fwd, &right, &up); // orientation and translation matrices combined vec4_initd(&m->a, right.x, up.x, fwd.x); vec4_initd(&m->b, right.y, up.y, fwd.y); vec4_initd(&m->c, right.z, up.z, fwd.z); vec4_initw(&m->d, -vec4_dot(&right, pos), -vec4_dot(&up, pos), -vec4_dot(&fwd, pos)); } void mat4_perspectivefovrh(mat4 *m, float fovdegrees, float aspectratio, float near, float far) { float h = 1.f / tanf(ftoradians(fovdegrees / 2.f)); float w = h / aspectratio; vec4_initd(&m->a, w, 0.f, 0.f); vec4_initd(&m->b, 0.f, h, 0.f); vec4_initw(&m->c, 0.f, 0.f, -far / (near - far)); vec4_initd(&m->d, 0.f, 0.f, (near * far) / (near - far)); } this is how I project my vertices: void device_project(device *d, const vec4 *coord, const mat4 *transform, int *projx, int *projy) { vec4 result; mat4_mul(transform, coord, &result); *projx = result.x * d->w + d->w / 2; *projy = result.y * d->h + d->h / 2; } void device_rendervertices(device *d, const camera *camera, const mesh meshes[], int nmeshes, const rgba *color) { int i, j; mat4 view, projection, world, transform, projview; mat4 translation, rotx, roty, rotz, transrotz, transrotzy; int projx, projy; // vec4_unity = (0.f, 1.f, 0.f, 0.f) mat4_lookatlh(&view, &camera->pos, &camera->target, &vec4_unity); mat4_perspectivefovrh(&projection, 45.f, (float)d->w / (float)d->h, 0.1f, 1.f); for (i = 0; i < nmeshes; i++) { // world matrix = translation * rotz * roty * rotx mat4_translatev(&translation, meshes[i].pos); mat4_rotatex(&rotx, ftoradians(meshes[i].rotx)); mat4_rotatey(&roty, ftoradians(meshes[i].roty)); mat4_rotatez(&rotz, ftoradians(meshes[i].rotz)); mat4_mulm(&translation, &rotz, &transrotz); // transrotz = translation * rotz mat4_mulm(&transrotz, &roty, &transrotzy); // transrotzy = transrotz * roty = translation * rotz * roty mat4_mulm(&transrotzy, &rotx, &world); // world = transrotzy * rotx = translation * rotz * roty * rotx // transform matrix mat4_mulm(&projection, &view, &projview); // projview = projection * view mat4_mulm(&projview, &world, &transform); // transform = projview * world = projection * view * world for (j = 0; j < meshes[i].nvertices; j++) { device_project(d, &meshes[i].vertices[j], &transform, &projx, &projy); device_putpixel(d, projx, projy, color); } } } this is how the cube and camera are initialized: // test mesh cube = &meshlist[0]; mesh_init(cube, "Cube", 8); cube->rotx = 0.f; cube->roty = 0.f; cube->rotz = 0.f; vec4_initw(&cube->pos, 0.f, 0.f, 0.f); vec4_initw(&cube->vertices[0], -1.f, 1.f, 1.f); vec4_initw(&cube->vertices[1], 1.f, 1.f, 1.f); vec4_initw(&cube->vertices[2], -1.f, -1.f, 1.f); vec4_initw(&cube->vertices[3], -1.f, -1.f, -1.f); vec4_initw(&cube->vertices[4], -1.f, 1.f, -1.f); vec4_initw(&cube->vertices[5], 1.f, 1.f, -1.f); vec4_initw(&cube->vertices[6], 1.f, -1.f, 1.f); vec4_initw(&cube->vertices[7], 1.f, -1.f, -1.f); // main camera vec4_initw(&maincamera.pos, 0.f, 0.f, 10.f); maincamera.target = vec4_zerow; and, just to be sure, this is how I compute matrix multiplications: void mat4_mul(const mat4 *m, const vec4 *va, vec4 *vb) { vb->x = m->a.x * va->x + m->b.x * va->y + m->c.x * va->z + m->d.x * va->w; vb->y = m->a.y * va->x + m->b.y * va->y + m->c.y * va->z + m->d.y * va->w; vb->z = m->a.z * va->x + m->b.z * va->y + m->c.z * va->z + m->d.z * va->w; vb->w = m->a.w * va->x + m->b.w * va->y + m->c.w * va->z + m->d.w * va->w; } void mat4_mulm(const mat4 *ma, const mat4 *mb, mat4 *mc) { mat4_mul(ma, &mb->a, &mc->a); mat4_mul(ma, &mb->b, &mc->b); mat4_mul(ma, &mb->c, &mc->c); mat4_mul(ma, &mb->d, &mc->d); }

Read the article

Configuring Oracle HTTP Server 12c for WebLogic Server Domain

- by Emin Askerov

Oracle HTTP Server (OHS) 12c 12.1.2 which was released in July 2013 as a part of Oracle Web Tier 12c is the web server component of Oracle Fusion Middleware. In essence this is Apache HTTP Server 2.2.22 (with critical bug fixes from higher versions) which includes modules developed specifically by Oracle. It provides a listener functionality for Oracle WebLogic Server and the framework for hosting static pages, dynamic pages, and applications over the Web. OHS can be easily managed by Weblogic Management Framework, a set of tools which provides administrative capabilities (start, stop, lifecycle operations, etc.) for Oracle Fusion Middleware products. In other words all tools which are familiar to us (Node Manager, WLST, Administration Console, Fusion Middleware Control etc.) presented as a part of Weblogic Management Framework and using for managing Java and System Components both for Weblogic Server and Standalone Domain types. You can familiarize yourself with these terms using related documentation: 1. Introduction to Oracle HTTP Server: http://docs.oracle.com/middleware/1212/webtier/index.html 2. Weblogic Management Framework: http://docs.oracle.com/middleware/1212/core/ASCON/terminology.htm#ASCON11260 In the given post I would like to cover rather simple use case how to configure OHS as web proxy in Weblogic Cluster environment. For example, we have existing Weblogic Domain where some managed servers have been joined to cluster and host business applications. We need to configure web proxy component which will act as entry point, load balancer for our cluster for user requests. Of course, we could install old good Apache HTTP Server and configure mod_wl plugin. However this solution not optimal from manageability perspective: we need to install Apache, install additional plugin then configure it by editing configuration file which is not really convenient for FMW Administrators and often increase time of performing of simple administrative task. Alternatively, we could use OHS as System Component within Weblogic Domain and use full power of Weblogic Management Framework in order to configure, manage and monitor it! I like this idea! What about you? I hope after reading this post you will agree with me. First of all it is necessary to download OHS binaries. You can use this link for downloading: http://www.oracle.com/technetwork/java/webtier/downloads/index2-303202.html As we will use Fusion Middleware Control for managing OHS instances it is necessary to extend your domain with Enterprise Manager and Oracle ADF and JRF templates. This is not topic for focusing in this post, but you could get more information from documentation or one of my previous posts: http://docs.oracle.com/middleware/1212/wls/WLDTR/fmw_templates.htm#sthref64 https://blogs.oracle.com/imc/entry/the_specifics_of_adf_12c Note: you should have properly configured Node Manager utility for managing OHS instances Let’s consider configuration process step by step: 1. Shut down all Weblogic instances of existing domain including Admin Server; 2. Install Oracle HTTP Server. You should use your Fusion Middleware Home Path (e.g. /u01/Oracle/FMW12) for Installation Location and select Colocated HTTP Server option as Installation Type. I will not focus on this topic in this post. All information related to OHS installation you could find here: http://docs.oracle.com/middleware/1212/webtier/WTINS/install_gui.htm#i1082009 3. Next we need to extend our existing domain with OHS component. In order to do this you should do the following: a. Run Fusion Middleware Configuration Wizard (ORACLE_HOME/oracle_common/common/bin/config.sh); b. On the step 1 select Update an existing domain option and point your Fusion Middleware Home Path; c. On the step 2 check Oracle HTTP Server, Oracle Enterprise Manager Plugin for WEBTIER templates; d. Go through other steps without any changes and finish configuration process. 4. Start Admin Server and all managed servers related to your cluster 5. Log in to Enterprise Manager FMW Control using http://<hostname>:<port>/em URL 6. Now we will create OHS instance within our Weblogic Domain Infrastructure. Navigate to Weblogic Domain -> Administration -> Create/Delete OHS menu item; 7. Enter to edit mode, clicking Changes -> Lock&Edit menu item; 8. Create new OHS instance clicking Create button; 9. Define Instance Name (e.g. DevOSH) and Machine parameters; 10. Now we need to define listen port. By default OHS will use 7777 port number for income HTTP requests. We could change it to any free port number we would like to use. In order to do it, right click on our created OHS instance (left hand panel) and navigate to Administration -> Port Configuration; 11. Click on record with port number 7777 and then click Edit button; 12. Change port number value (in our case this will be 8080) and then click OK button; 13. Now we need to edit mod_wl_ohs configuration in order to enable OHS to act as proxy for WebLogic Server Instances/Cluster; 14. In order to do it right click on our created OHS instance (left panel) and navigate to Administration -> mod_wl_ohs Configuration; a. In Weblogic Cluster you should enter cluster address (define <host:port> for all managed servers which participated in cluster), e.g: 192.168.56.2:7004,192.168.56.2:7005 b. Define Weblogic Port parameter at which the Oracle WebLogic Server host is listening for connection requests from the module (or from other servers); c. Check Dynamic Server List option. This will dynamically update cluster list for every request; d. In the Location table define list of endpoint locations which you would like to process. In order to do this click Add Row button and define Location, Weblogic Cluster, Path Trim and Path Prefix parameters (if required); e. Click Apply button in order to save changes. 15. Activate changes clicking Changes ? Activate Changes menu item; 16. Finally we will start configured OHS instance. Right click on OHS instance tree item under Web Tier folder, select Control -> Start Up menu item; 17. Ensure that OHS instance up and running and then test your environment. Run deployed application to your Weblogic Cluster accessing via OHS web proxy; Normal 0 false false false RU X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;}

Read the article

Navigating Libgdx Menu with arrow keys or controller

- by Phil Royer

I'm attempting to make my menu navigable with the arrow keys or via the d-pad on a controller. So Far I've had no luck. The question is: Can someone walk me through how to make my current menu or any libgdx menu keyboard accessible? I'm a bit noobish with some stuff and I come from a Javascript background. Here's an example of what I'm trying to do: http://dl.dropboxusercontent.com/u/39448/webgl/qb/qb.html For a simple menu that you can just add a few buttons to and it run out of the box use this: http://www.sadafnoor.com/blog/how-to-create-simple-menu-in-libgdx/ Or you can use my code but I use a lot of custom styles. And here's an example of my code: import aurelienribon.tweenengine.Timeline; import aurelienribon.tweenengine.Tween; import aurelienribon.tweenengine.TweenManager; import com.badlogic.gdx.Game; import com.badlogic.gdx.Gdx; import com.badlogic.gdx.Screen; import com.badlogic.gdx.graphics.GL20; import com.badlogic.gdx.graphics.Texture; import com.badlogic.gdx.graphics.g2d.Sprite; import com.badlogic.gdx.graphics.g2d.SpriteBatch; import com.badlogic.gdx.graphics.g2d.TextureAtlas; import com.badlogic.gdx.math.Vector2; import com.badlogic.gdx.scenes.scene2d.Actor; import com.badlogic.gdx.scenes.scene2d.InputEvent; import com.badlogic.gdx.scenes.scene2d.InputListener; import com.badlogic.gdx.scenes.scene2d.Stage; import com.badlogic.gdx.scenes.scene2d.ui.Skin; import com.badlogic.gdx.scenes.scene2d.ui.Table; import com.badlogic.gdx.scenes.scene2d.ui.TextButton; import com.badlogic.gdx.scenes.scene2d.utils.Align; import com.badlogic.gdx.scenes.scene2d.utils.ClickListener; import com.project.game.tween.ActorAccessor; public class MainMenu implements Screen { private SpriteBatch batch; private Sprite menuBG; private Stage stage; private TextureAtlas atlas; private Skin skin; private Table table; private TweenManager tweenManager; @Override public void render(float delta) { Gdx.gl.glClearColor(0, 0, 0, 1); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); batch.begin(); menuBG.draw(batch); batch.end(); //table.debug(); stage.act(delta); stage.draw(); //Table.drawDebug(stage); tweenManager.update(delta); } @Override public void resize(int width, int height) { menuBG.setSize(width, height); stage.setViewport(width, height, false); table.invalidateHierarchy(); } @Override public void resume() { } @Override public void show() { stage = new Stage(); Gdx.input.setInputProcessor(stage); batch = new SpriteBatch(); atlas = new TextureAtlas("ui/atlas.pack"); skin = new Skin(Gdx.files.internal("ui/menuSkin.json"), atlas); table = new Table(skin); table.setBounds(0, 0, Gdx.graphics.getWidth(), Gdx.graphics.getHeight()); // Set Background Texture menuBackgroundTexture = new Texture("images/mainMenuBackground.png"); menuBG = new Sprite(menuBackgroundTexture); menuBG.setSize(Gdx.graphics.getWidth(), Gdx.graphics.getHeight()); // Create Main Menu Buttons // Button Play TextButton buttonPlay = new TextButton("START", skin, "inactive"); buttonPlay.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new LevelMenu()); } }); buttonPlay.addListener(new InputListener() { public boolean keyDown (InputEvent event, int keycode) { System.out.println("down"); return true; } }); buttonPlay.padBottom(12); buttonPlay.padLeft(20); buttonPlay.getLabel().setAlignment(Align.left); // Button EXTRAS TextButton buttonExtras = new TextButton("EXTRAS", skin, "inactive"); buttonExtras.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new ExtrasMenu()); } }); buttonExtras.padBottom(12); buttonExtras.padLeft(20); buttonExtras.getLabel().setAlignment(Align.left); // Button Credits TextButton buttonCredits = new TextButton("CREDITS", skin, "inactive"); buttonCredits.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new Credits()); } }); buttonCredits.padBottom(12); buttonCredits.padLeft(20); buttonCredits.getLabel().setAlignment(Align.left); // Button Settings TextButton buttonSettings = new TextButton("SETTINGS", skin, "inactive"); buttonSettings.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new Settings()); } }); buttonSettings.padBottom(12); buttonSettings.padLeft(20); buttonSettings.getLabel().setAlignment(Align.left); // Button Exit TextButton buttonExit = new TextButton("EXIT", skin, "inactive"); buttonExit.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { Gdx.app.exit(); } }); buttonExit.padBottom(12); buttonExit.padLeft(20); buttonExit.getLabel().setAlignment(Align.left); // Adding Heading-Buttons to the cue table.add().width(190); table.add().width((table.getWidth() / 10) * 3); table.add().width((table.getWidth() / 10) * 5).height(140).spaceBottom(50); table.add().width(190).row(); table.add().width(190); table.add(buttonPlay).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonExtras).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonCredits).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonSettings).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonExit).width(460).height(110); table.add().row(); stage.addActor(table); // Animation Settings tweenManager = new TweenManager(); Tween.registerAccessor(Actor.class, new ActorAccessor()); // Heading and Buttons Fade In Timeline.createSequence().beginSequence() .push(Tween.set(buttonPlay, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonExtras, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonCredits, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonSettings, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonExit, ActorAccessor.ALPHA).target(0)) .push(Tween.to(buttonPlay, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonExtras, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonCredits, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonSettings, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonExit, ActorAccessor.ALPHA, .5f).target(1)) .end().start(tweenManager); tweenManager.update(Gdx.graphics.getDeltaTime()); } public static Vector2 getStageLocation(Actor actor) { return actor.localToStageCoordinates(new Vector2(0, 0)); } @Override public void dispose() { stage.dispose(); atlas.dispose(); skin.dispose(); menuBG.getTexture().dispose(); } @Override public void hide() { dispose(); } @Override public void pause() { } }

Read the article

JQuery Mobile Code Snippets 1

- by Yousef_Jadallah

I want to share with you some important codes that you may need during JQuery Mobile development.These codes are tested on Alpha 4 version. Beta 1 has been released before two days, Therefore I will test them in my current project and let you know if there is any changes : Normal 0 false false false EN-US X-NONE AR-SA /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Normal 0 false false false EN-US X-NONE AR-SA /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:Arial; mso-bidi-theme-font:minor-bidi;} Show and hide back button in your Application $(document).bind("mobileinit", function () { $.mobile.page.prototype.options.addBackBtn = true; }); Customizing the back button text $(document).bind("mobileinit", function () {$.mobile.page.prototype.options.backBtnText = "previous";}); Hide "Close button" for dialog programatically: $('[data-role=dialog]div[id="YourDiaogdivID"]').live('pagecreate', function (event) { $("a[data-icon='delete']").hide(); }); Change Select option element index: var myselect = $("select#foo"); myselect[0].selectedIndex = 0; //The new index myselect.selectmenu("refresh"); //uset this line of code after any updating on the select element Change Select optoin elemetn text value: $("select#foo").parent().contents().children('.ui-btn-text').text('Your Text Here'); Refreshing a checkbox $("select#foo").parent().contents().children('.ui-btn-text').text('Your Text Here'); Hide select option element $('#foo').parent().hide(); Hide and Show Page Loading Message : $.mobile.pageLoading(); //Show $.mobile.pageLoading(true); //hide overriding $.mobile.loadingMessage $(document).bind("mobileinit", function () { $.mobile.loadingMessage = 'My Loading Message'; }); Hide and Show jQuery-Mobile-Themed-DatePicker $(".ui-datepicker").hide(); $(".ui-datepicker").show(); Build your Custom Loading Message : $('#CustomeLoadingMessage').hide();//Hide the div $('# CustomeLoadingMessage').ajaxStart(function () { $(this).show(); }); $('# CustomeLoadingMessage').ajaxStop(function () { $(this).hide(); }); I wil publish other important codes soon.Hope that helps.

Read the article

Profiling Startup Of VS2012 – SpeedTrace Profiler

- by Alois Kraus

SpeedTrace is a relatively unknown profiler made a company called Ipcas. A single professional license does cost 449€+VAT. For the test I did use SpeedTrace 4.5 which is currently Beta. Although it is cheaper than dotTrace it has by far the most options to influence how profiling does work. First you need to create a tracing project which does configure tracing for one process type. You can start the application directly from the profiler or (much more interesting) it does attach to a specific process when it is started. For this you need to check “Trace the specified …” radio button and enter the process name in the “Process Name of the Trace” edit box. You can even selectively enable tracing for processes with a specific command line. Then you need to activate the trace project by pressing the Activate Project button and you are ready to start VS as usual. If you want to profile the next 10 VS instances that you start you can set the Number of Processes counter to e.g. 10. This is immensely helpful if you are trying to profile only the next 5 started processes. As you can see there are many more tabs which do allow to influence tracing in a much more sophisticated way. SpeedTrace is the only profiler which does not rely entirely on the profiling Api of .NET. Instead it does modify the IL code (instrumentation on the fly) to write tracing information to disc which can later be analyzed. This approach is not only very fast but it does give you unprecedented analysis capabilities. Once the traces are collected they do show up in your workspace where you can open the trace viewer. I do skip the other windows because this view is by far the most useful one. You can sort the methods not only by Wall Clock time but also by CPU consumption and wait time which none of the other products support in their views at the same time. If you want to optimize for CPU consumption sort by CPU time. If you want to find out where most time is spent you need Clock Total time and Clock Waiting. There you can directly see if the method did take long because it did wait on something or it did really execute stuff that did take so long. Once you have found a method you want to drill deeper you can double click on a method to get to the Caller/Callee view which is similar to the JetBrains Method Grid view. But this time you do see much more. In the middle is the clicked method. Above are the methods that call you and below are the methods that you do directly call. Normally you would then start digging deeper to find the end of the chain where the slow method worth optimizing is located. But there is a shortcut. You can press the magic button to calculate the aggregation of all called methods. This is displayed in the lower left window where you can see each method call and how long it did take. There you can also sort to see if this call stack does only contain methods (e.g. WCF connect calls which you cannot make faster) not worth optimizing. YourKit has a similar feature where it is called Callees List. In the Functions tab you have in the context menu also many other useful analysis options One really outstanding feature is the View Call History Drilldown. When you select this one you get not a sum of all method invocations but a list with the duration of each method call. This is not surprising since SpeedTrace does use tracing to get its timings. There you can get many useful graphs how this method did behave over time. Did it become slower at some point in time or was only the first call slow? The diagrams and the list will tell you that. That is all fine but what should I do when one method call was slow? I want to see from where it was coming from. No problem select the method in the list hit F10 and you get the call stack. This is a life saver if you e.g. search for serialization problems. Today Serializers are used everywhere. You want to find out from where the 5s XmlSerializer.Deserialize call did come from? Hit F10 and you get the call stack which did invoke the 5s Deserialize call. The CPU timeline tab is also useful to find out where long pauses or excessive CPU consumption did happen. Click in the graph to get the Thread Stacks window where you can get a quick overview what all threads were doing at this time. This does look like the Stack Traces feature in YourKit. Only this time you get the last called method first which helps to quickly see what all threads were executing at this moment. YourKit does generate a rather long list which can be hard to go through when you have many threads. The thread list in the middle does not give you call stacks or anything like that but you see which methods were found most often executing code by the profiler which is a good indication for methods consuming most CPU time. This does sound too good to be true? I have not told you the best part yet. The best thing about this profiler is the staff behind it. When I do see a crash or some other odd behavior I send a mail to Ipcas and I do get usually the next day a mail that the problem has been fixed and a download link to the new version. The guys at Ipcas are even so helpful to log in to your machine via a Citrix Client to help you to get started profiling your actual application you want to profile. After a 2h telco I was converted from a hater to a believer of this tool. The fast response time might also have something to do with the fact that they are actively working on 4.5 to get out of the door. But still the support is by far the best I have encountered so far. The only downside is that you should instrument your assemblies including the .NET Framework to get most accurate numbers. You can profile without doing it but then you will see very high JIT times in your process which can severely affect the correctness of the measured timings. If you do not care about exact numbers you can also enable in the main UI in the Data Trace tab logging of method arguments of primitive types. If you need to know what files at which times were opened by your application you can find it out without a debugger. Since SpeedTrace does read huge trace files in its reader you should perhaps use a 64 bit machine to be able to analyze bigger traces as well. The memory consumption of the trace reader is too high for my taste. But they did promise for the next version to come up with something much improved.

Read the article

C#/.NET Little Wonders: Comparer<T>.Default

- by James Michael Hare

I’ve been working with a wonderful team on a major release where I work, which has had the side-effect of occupying most of my spare time preparing, testing, and monitoring. However, I do have this Little Wonder tidbit to offer today. Introduction The IComparable<T> interface is great for implementing a natural order for a data type. It’s a very simple interface with a single method: 1: public interface IComparer<in T> 2: { 3: // Compare two instances of same type. 4: int Compare(T x, T y); 5: } So what do we expect for the integer return value? It’s a pseudo-relative measure of the ordering of x and y, which returns an integer value in much the same way C++ returns an integer result from the strcmp() c-style string comparison function: If x == y, returns 0. If x > y, returns > 0 (often +1, but not guaranteed) If x < y, returns < 0 (often –1, but not guaranteed) Notice that the comparison operator used to evaluate against zero should be the same comparison operator you’d use as the comparison operator between x and y. That is, if you want to see if x > y you’d see if the result > 0. The Problem: Comparing With null Can Be Messy This gets tricky though when you have null arguments. According to the MSDN, a null value should be considered equal to a null value, and a null value should be less than a non-null value. So taking this into account we’d expect this instead: If x == y (or both null), return 0. If x > y (or y only is null), return > 0. If x < y (or x only is null), return < 0. But here’s the problem – if x is null, what happens when we attempt to call CompareTo() off of x? 1: // what happens if x is null? 2: x.CompareTo(y); It’s pretty obvious we’ll get a NullReferenceException here. Now, we could guard against this before calling CompareTo(): 1: int result; 2: 3: // first check to see if lhs is null. 4: if (x == null) 5: { 6: // if lhs null, check rhs to decide on return value. 7: if (y == null) 8: { 9: result = 0; 10: } 11: else 12: { 13: result = -1; 14: } 15: } 16: else 17: { 18: // CompareTo() should handle a null y correctly and return > 0 if so. 19: result = x.CompareTo(y); 20: } Of course, we could shorten this with the ternary operator (?:), but even then it’s ugly repetitive code: 1: int result = (x == null) 2: ? ((y == null) ? 0 : -1) 3: : x.CompareTo(y); Fortunately, the null issues can be cleaned up by drafting in an external Comparer. The Soltuion: Comparer<T>.Default You can always develop your own instance of IComparer<T> for the job of comparing two items of the same type. The nice thing about a IComparer is its is independent of the things you are comparing, so this makes it great for comparing in an alternative order to the natural order of items, or when one or both of the items may be null. 1: public class NullableIntComparer : IComparer<int?> 2: { 3: public int Compare(int? x, int? y) 4: { 5: return (x == null) 6: ? ((y == null) ? 0 : -1) 7: : x.Value.CompareTo(y); 8: } 9: } Now, if you want a custom sort -- especially on large-grained objects with different possible sort fields -- this is the best option you have. But if you just want to take advantage of the natural ordering of the type, there is an easier way. If the type you want to compare already implements IComparable<T> or if the type is System.Nullable<T> where T implements IComparable, there is a class in the System.Collections.Generic namespace called Comparer<T> which exposes a property called Default that will create a singleton that represents the default comparer for items of that type. For example: 1: // compares integers 2: var intComparer = Comparer<int>.Default; 3: 4: // compares DateTime values 5: var dateTimeComparer = Comparer<DateTime>.Default; 6: 7: // compares nullable doubles using the null rules! 8: var nullableDoubleComparer = Comparer<double?>.Default; This helps you avoid having to remember the messy null logic and makes it to compare objects where you don’t know if one or more of the values is null. This works especially well when creating say an IComparer<T> implementation for a large-grained class that may or may not contain a field. For example, let’s say you want to create a sorting comparer for a stock open price, but if the market the stock is trading in hasn’t opened yet, the open price will be null. We could handle this (assuming a reasonable Quote definition) like: 1: public class Quote 2: { 3: // the opening price of the symbol quoted 4: public double? Open { get; set; } 5: 6: // ticker symbol 7: public string Symbol { get; set; } 8: 9: // etc. 10: } 11: 12: public class OpenPriceQuoteComparer : IComparer<Quote> 13: { 14: // Compares two quotes by opening price 15: public int Compare(Quote x, Quote y) 16: { 17: return Comparer<double?>.Default.Compare(x.Open, y.Open); 18: } 19: } Summary Defining a custom comparer is often needed for non-natural ordering or defining alternative orderings, but when you just want to compare two items that are IComparable<T> and account for null behavior, you can use the Comparer<T>.Default comparer generator and you’ll never have to worry about correct null value sorting again. Technorati Tags: C#,.NET,Little Wonders,BlackRabbitCoder,IComparable,Comparer

Read the article

It was a figure of speech!

- by Ratman21

Yesterday I posted the following as attention getter / advertisement (as well as my feelings). In the groups, (I am in) on the social networking site, LinkedIn and boy did I get responses. I am fighting mad about (a figure of speech, really) not having a job! Look just because I am over 55 and have gray hair. It does not mean, my brain is dead or I can no longer trouble shoot a router or circuit or LAN issue. Or that I can do “IT” work at all. And I could prove this if; some one would give me at job. Come on try me for 90 days at min. wage. I know you will end up keeping me (hope fully at normal pay) around. Is any one hearing me…come on take up the challenge! This was the responses I got. I hear you. We just need to retrain and get our skills up to speed is all. That is what I am doing. I have not given up. Just got to stay on top of the game. Experience is on our side if we have the credentials and we are reasonable about our salaries this should not be an issue. Already on it, going back to school and have got three certifications (CompTIA A+, Security+ and Network+. I am now studying for my CISCO CCNA certification. As to my salary, I am willing to work at very reasonable rate. You need to re-brand yourself like a product, market and sell yourself. You need to smarten up, look and feel a million dollars, re-energize yourself, regain your confidents. Either start your own business, or re-write your CV so it stands out from the rest, get the template off the internet. Contact every recruitment agent in your town, state, country and overseas, and on the web. Apply to every job you think you could do, you may not get it but you will make a contact for your network, which may lead to a job at the end of the tunnel. Get in touch with everyone you know from past jobs. Do charity work. I maintain the IT Network, stage electrical and the Telecom equipment in my church, Again already on it. I have email the world is seems with my resume and cover letters. So far, I have rewritten or had it rewrote, my resume and cover letters; over seven times so far. Re-energize? I never lost my energy level or my self-confidents in my work (now if could get some HR personal to see the same). I also volunteer at my church, I created and maintain the church web sit. I share your frustration. Sucks being over 50 and looking for work. Please don't sell yourself short at min wage because the employer will think that’s your worth. Keep trying!! I never stop trying and min wage is only for 90 days. If some one takes up the challenge. Some post asked if I am keeping up technology. Do you keep up with the latest technology and can speak the language fluidly? Yep to that and as to speaking it also a yep! I am a geek you know. I heard from others over the 50 year mark and younger too. I'm with you! I keep getting told that I don't have enough experience because I just recently completed a Masters level course in Microsoft SQL Server, which gave me a project-intensive equivalent of between 2 and 3 years of experience. On top of that training, I have 19 years as an applications programmer and database administrator. I can normalize rings around experienced DBAs and churn out effective code with the best of them. But my 19 years is worthless as far as most recruiters and HR people are concerned because it is not the specific experience for which they're looking. HR AND RECRUITERS TAKE NOTE: Experience, whatever the language, translates across platforms and technology! By the way, I'm also over 55 and still have "got it"! I never lost it and I also can work rings round younger techs. I'm 52 and female and seem to be having the same issues. I have over 10 years experience in tech support (with a BS in CIS) and can't get hired either. Ow, I only have an AS in computer science along with my certifications. Keep the faith, I have been unemployed since August of 2008. I agree with you...I am willing to return to the beginning of my retail career and work myself back through the ranks, if someone will look past the grey and realize the knowledge I would bring to the table. I also would like some one to look past the gray. Interesting approach, volunteering to work for minimum wage for 90 days. I'm in the same situation as you, being 55 & balding w/white hair, so I know where you're coming from. I've been out of work now for a year. I'm in Michigan, where the unemployment rate is estimated to be 15% (the worst in the nation) & even though I've got 30+ years of IT experience ranging from mainframe to PC desktop support, it's difficult to even get a face-to-face interview. I had one prospective employer tell me flat out that I "didn't have the energy required for this position". Mostly I never get any feedback. All I can say is good luck & try to remain optimistic. He said WHAT! Yes remaining optimistic is key. Along with faith in God. Then there was this (for lack of better word) jerk. Give it up already. You were too old to work in high tech 10 years ago. Scratch that, 20 years ago! Try selling hot dogs in front of Fry's Electronics. At least you would get a chance to eat lunch with your previous colleagues.... You know funny thing on this person is that I checked out his profile. He is older than I am.

Read the article

My vertex shader doesn't affect texture coords or diffuse info but works for position

- by tina nyaa

I am new to 3D and DirectX - in the past I have only used abstractions for 2D drawing. Over the past month I've been studying really hard and I'm trying to modify and adapt some of the shaders as part of my personal 'study project'. Below I have a shader, modified from one of the Microsoft samples. I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? // // Skinned Mesh Effect file // Copyright (c) 2000-2002 Microsoft Corporation. All rights reserved. // float4 lhtDir = {0.0f, 0.0f, -1.0f, 1.0f}; //light Direction float4 lightDiffuse = {0.6f, 0.6f, 0.6f, 1.0f}; // Light Diffuse float4 MaterialAmbient : MATERIALAMBIENT = {0.1f, 0.1f, 0.1f, 1.0f}; float4 MaterialDiffuse : MATERIALDIFFUSE = {0.8f, 0.8f, 0.8f, 1.0f}; // Matrix Pallette static const int MAX_MATRICES = 100; float4x3 mWorldMatrixArray[MAX_MATRICES] : WORLDMATRIXARRAY; float4x4 mViewProj : VIEWPROJECTION; /////////////////////////////////////////////////////// struct VS_INPUT { float4 Pos : POSITION; float4 BlendWeights : BLENDWEIGHT; float4 BlendIndices : BLENDINDICES; float3 Normal : NORMAL; float3 Tex0 : TEXCOORD0; }; struct VS_OUTPUT { float4 Pos : POSITION; float4 Diffuse : COLOR; float2 Tex0 : TEXCOORD0; }; float3 Diffuse(float3 Normal) { float CosTheta; // N.L Clamped CosTheta = max(0.0f, dot(Normal, lhtDir.xyz)); // propogate scalar result to vector return (CosTheta); } VS_OUTPUT VShade(VS_INPUT i, uniform int NumBones) { VS_OUTPUT o; float3 Pos = 0.0f; float3 Normal = 0.0f; float LastWeight = 0.0f; // Compensate for lack of UBYTE4 on Geforce3 int4 IndexVector = D3DCOLORtoUBYTE4(i.BlendIndices); // cast the vectors to arrays for use in the for loop below float BlendWeightsArray[4] = (float[4])i.BlendWeights; int IndexArray[4] = (int[4])IndexVector; // calculate the pos/normal using the "normal" weights // and accumulate the weights to calculate the last weight for (int iBone = 0; iBone < NumBones-1; iBone++) { LastWeight = LastWeight + BlendWeightsArray[iBone]; Pos += mul(i.Pos, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; Normal += mul(i.Normal, mWorldMatrixArray[IndexArray[iBone]]) * BlendWeightsArray[iBone]; } LastWeight = 1.0f - LastWeight; // Now that we have the calculated weight, add in the final influence Pos += (mul(i.Pos, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); Normal += (mul(i.Normal, mWorldMatrixArray[IndexArray[NumBones-1]]) * LastWeight); // transform position from world space into view and then projection space //o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Pos = mul(float4(Pos.xyz, 1.0f), mViewProj); o.Diffuse.x = 0.0f; o.Diffuse.y = 0.0f; o.Diffuse.z = 0.0f; o.Diffuse.w = 0.0f; o.Tex0 = float2(0,0); return o; } technique t0 { pass p0 { VertexShader = compile vs_3_0 VShade(4); } } I am currently using the SlimDX .NET wrapper around DirectX, but the API is extremely similar: public void Draw() { var device = vertexBuffer.Device; device.Clear(ClearFlags.Target | ClearFlags.ZBuffer, Color.White, 1.0f, 0); device.SetRenderState(RenderState.Lighting, true); device.SetRenderState(RenderState.DitherEnable, true); device.SetRenderState(RenderState.ZEnable, true); device.SetRenderState(RenderState.CullMode, Cull.Counterclockwise); device.SetRenderState(RenderState.NormalizeNormals, true); device.SetSamplerState(0, SamplerState.MagFilter, TextureFilter.Anisotropic); device.SetSamplerState(0, SamplerState.MinFilter, TextureFilter.Anisotropic); device.SetTransform(TransformState.World, Matrix.Identity * Matrix.Translation(0, -50, 0)); device.SetTransform(TransformState.View, Matrix.LookAtLH(new Vector3(-200, 0, 0), Vector3.Zero, Vector3.UnitY)); device.SetTransform(TransformState.Projection, Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); var material = new Material(); material.Ambient = material.Diffuse = material.Emissive = material.Specular = new Color4(Color.White); material.Power = 1f; device.SetStreamSource(0, vertexBuffer, 0, vertexSize); device.VertexDeclaration = vertexDeclaration; device.Indices = indexBuffer; device.Material = material; device.SetTexture(0, texture); var param = effect.GetParameter(null, "mWorldMatrixArray"); var boneWorldTransforms = bones.OrderedBones.OrderBy(x => x.Id).Select(x => x.CombinedTransformation).ToArray(); effect.SetValue(param, boneWorldTransforms); effect.SetValue(effect.GetParameter(null, "mViewProj"), Matrix.Identity);// Matrix.PerspectiveFovLH((float)Math.PI / 4, (float)device.Viewport.Width / device.Viewport.Height, 10, 10000000)); effect.SetValue(effect.GetParameter(null, "MaterialDiffuse"), material.Diffuse); effect.SetValue(effect.GetParameter(null, "MaterialAmbient"), material.Ambient); effect.Technique = effect.GetTechnique(0); var passes = effect.Begin(FX.DoNotSaveState); for (var i = 0; i < passes; i++) { effect.BeginPass(i); device.DrawIndexedPrimitives(PrimitiveType.TriangleList, 0, 0, skin.Vertices.Length, 0, skin.Indicies.Length / 3); effect.EndPass(); } effect.End(); } Again, I set diffuse and tex0 vertex shader outputs to zero, but my model still shows the full texture and lighting as if I hadn't changed the values from the vertex buffer. Changing the position of the model works, but nothing else. Why is this? Also, whatever I set in the bone transformation matrices doesn't seem to have an effect on my model. If I set every bone transformation to a zero matrix, the model still shows up as if nothing had happened, but changing the Pos field in shader output makes the model disappear. I don't understand why I'm getting this kind of behaviour. Thank you!

Read the article

CodePlex Daily Summary for Monday, July 15, 2013

CodePlex Daily Summary for Monday, July 15, 2013Popular ReleasesMVC Forum: MVC Forum v1.0: Finally version 1.0 is here! We have been fixing a few bugs, and making sure the release is as stable as possible. We have also changed the way configuration of the application works, mostly how to add your own code or replace some of the standard code with your own. If you download and use our software, please give us some sort of feedback, good or bad!SharePoint 2013 TypeScript Definitions: Release 1.1: TypeScript 0.9 support SharePoint TypeScript Definitions are now compliant with the new version of TypeScript TypeScript generics are now used for defining collection classes (derivatives of SP.ClientCollection object) Improved coverage Added mQuery definitions (m$) Added SPClientAutoFill definitions SP.Utilities namespace is now fully covered SP.UI modal dialog definitions improved CSR definitions improved, added some missing methods and context properties, mostly related to list ...GoAgent GUI: GoAgent GUI ??? 1.0.0: ????GoAgent GUI????，???????????.Net Framework 4.0 ???????: Windows 8 x64 Windows 8 x86 Windows 7 x64 Windows 7 x86 ???????： Windows 8.1 Preview (x86/x64) ???????： Windows XP ????： ????????GoAgent????，????????，?????????????，???????????????????，??????????，????。PiGraph: PiGraph 2.0.8.13: C?p nh?t:Các l?i dã s?a: S?a l?i không nh?p du?c s? âm. L?i tabindex trong giao di?n Thêm hàm Các l?i chua kh?c ph?c: L?i ghi chú nh?p nháy màu. L?i khung ghi chú vu?t ra kh?i biên khi luu file. Luu ý:N?u không kh?i d?ng duoc chuong trình, b?n nên c?p nh?t driver card d? h?a phiên b?n m?i nh?t: AMD Graphics Drivers NVIDIA Driver Xem yêu c?u h? th?ngD3D9Client: D3D9Client R12 for Orbiter Beta: D3D9Client release for orbiter BetaVidCoder: 1.4.23: New in 1.4.23 Added French translation. Fixed non-x264 video encoders not sticking in video tab. New in 1.4 Updated HandBrake core to 0.9.9 Blu-ray subtitle (PGS) support Additional framerates: 30, 50, 59.94, 60 Additional sample rates: 8, 11.025, 12 and 16 kHz Additional higher bitrates for audio Same as Source Constant Framerate 24-bit FLAC encoding Added Windows Phone 8 and Apple TV 3 presets Introduced process isolation for encodes. Now if HandBrake crashes, VidCoder will ...Project Server 2013 Event Handler Admin Tool: PSI Event Admin Tool: Download & exract the File. Use LoggerAdmin to upload the event handlers in project server 2013. PSIEventLogger\LoggerAdmin\bin\DebugGherkin editor: Gherkin Editor Beta 2: Fix issue #7 and add some refactoring and code cleanupNew-NuGetPackage PowerShell Script: New-NuGetPackage.ps1 PowerShell Script v1.2: Show nuget gallery to push to when prompting user if they want to push their package.Site Templates By Steve: SharePoint 2010 CORE Site Theme By Steve WSP: Great Site Theme to start with from Steve. See project home page for install instructions. This is a nice centered, mega-menu, fixed width masterpage with styles. Remember to update the mega menu lists.SharePoint Solution Installer: SharePoint Solution Installer V1.2.8: setup2013.exe now supports CompatibilityLevel to target specific hive Use setup.exe for SP2007 & SP2010. Use setup2013.exe for SP2013.TBox - tool to make developer's life easier.: TBox 1.021: 1)Add console unit tests runner, to run unit tests in parallel from console. Also this new sub tool can save valid xml nunit report. It can help you in continuous integration. 2)Fix build scripts.LifeInSharepoint Modern UI Update: Version 2: Some minor improvements, including Audience Targeting support for quick launch links. Also removing all NextDocs references.Virtual Photonics: VTS MATLAB Package 1.0.13 Beta: This is the beta release of the MATLAB package with examples of using the VTS libraries within MATLAB. Changes for this release: Added two new examples to vts_solver_demo.m that: 1) generates and plots R(lambda) at a given rho, and chromophore concentrations assuming a power law for scattering, and 2) solves inverse problem for R(lambda) at given rho. This example solves for concentrations of HbO2, Hb and H20 given simulated measurements created using Nurbs scaled Monte Carlo and inverted u...Advanced Resource Tab for Blend: Advanced Resource Tab: This is the first alpha release of the advanced resource tab for Blend for Visual Studio 2012.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.96: Fix for issue #19957: EXE should output the name of the file(s) being minified. Discussion #449181: throw a Sev-2 warning when trailing commas are detected on an Array literal. Perfectly legal to do so, but the behavior ends up working differently on different browsers, so throw a cross-browser warning. Add a few more known global names for improved ES6 compatibility update Nuget package to version 2.5 and automatically add the AjaxMin.targets to your project when you update the package...Outlook 2013 Add-In: Categories and Colors: This new version has a major change in the drawing of the list items: - Using owner drawn code to format the appointments using GDI (some flickering may occur, but it looks a little bit better IMHO, with separate sections). - Added category color support (if more than one category, only one color will be shown). Here, the colors Outlook uses are slightly different than the ones available in System.Drawing, so I did a first approach matching. ;-) - Added appointment status support (to show fr...Columbus Remote Desktop: 2.0 Sapphire: Added configuration settings Added update notifications Added ability to disable GPU acceleration Fixed connection bugsLINQ to Twitter: LINQ to Twitter v2.1.07: Supports .NET 3.5, .NET 4.0, .NET 4.5, Silverlight 4.0, Windows Phone 7.1, Windows Phone 8, Client Profile, Windows 8, and Windows Azure. 100% Twitter API coverage. Also supports Twitter API v1.1! Also on NuGet.DotNetNuke® Community Edition CMS: 06.02.08: Major Highlights Fixed issue where the application throws an Unhandled Error and an HTTP Response Code of 200 when the connection to the database is lost. Security FixesNone Updated Modules/Providers ModulesNone ProvidersNoneNew Projects[.Net Intl] harroc_c;mallar_a;olouso_f: The goal of this project is to create a web crawler and a web front who allows you to search in your index. You will create a mini (or large!) search engine basButterfly Storage: Butterfly Storage is a data access technology based on object-oriented database model for Windows Store applications.KaveCompany: KaveCompleave that girl alone: a team project!MyClrProfiler: This project helps you learn about and develop your own CLR profiler.NETDeob: Deobfuscate obfuscated .NET files easilyProgram stomatologie: SummarySimple Graph Library: Simple portable class library for graphs data structures. .NET, Silverlight 4/5, Windows Phone, Windows RT, Xbox 360T6502 Emulator: T6502 is a 6502 emulator written in TypeScript using AngularJS. The goal is well-organized, readable code over performance.WP8 File Access Webserver: C# HTTP server and web application on Windows Phone 8. Implements file access, browsing and downloading.wpadk: wpadk????wp7?????? ?????????，?????、SDK、wpadk?????????????。??????????????????。??????????????????，????wpadk?????????????????????????????????????。xlmUnit: xlmUnit, Unit Testing

Read the article

How do I do Collisions in my JavaScript Game Code Below?

- by Henry

I'm trying to figure out how would I add collision detection to my code so that when the "Man" character touches the "RedHouse" the RedHouse disappears? Thanks. By the way, I'm new to how things are done on this site, so thus, if there is anything else needed or so, let me know. <title>HMan</title> <body style="background:#808080;"> <br> <canvas id="canvasBg" width="800px" height="500px"style="display:block;background:#ffffff;margin:100px auto 0px;"></canvas> <canvas id="canvasRedHouse" width="800px" height="500px" style="display:block;margin:-500px auto 0px;"></canvas> <canvas id="canvasEnemy" width="800px" height="500px" style="display:block;margin:-500px auto 0px;"></canvas> <canvas id="canvasEnemy2" width="800px" height="500px" style="display:block;margin:-500px auto 0px;"></canvas> <canvas id="canvasMan" width="800px" height="500px" style="display:block;margin:-500px auto 0px;"></canvas> <script> var isPlaying = false; var requestAnimframe = window.requestAnimationFrame || window.webkitRequestAnimationFrame || window.mozRequestAnimationFrame || window.msRequestAnimationFrame || window.oRequestAnimationFrame; var canvasBg = document.getElementById('canvasBg'); var ctxBg = canvasBg.getContext('2d'); var canvasRedHouse = document.getElementById('canvasRedHouse'); var ctxRedHouse = canvasRedHouse.getContext('2d'); var House1; House1 = new RedHouse(); var canvasMan = document.getElementById('canvasMan'); var ctxMan = canvasMan.getContext('2d'); var Man1; Man1 = new Man(); var imgSprite = new Image(); imgSprite.src = 'SpritesI.png'; imgSprite.addEventListener('load',init,false); function init() { drawBg(); startLoop(); document.addEventListener('keydown',checkKeyDown,false); document.addEventListener('keyup',checkKeyUp,false); } function drawBg() { var SpriteSourceX = 0; var SpriteSourceY = 0; var drawManOnScreenX = 0; var drawManOnScreenY = 0; ctxBg.drawImage(imgSprite,SpriteSourceX,SpriteSourceY,800,500,drawManOnScreenX, drawManOnScreenY,800,500); } function clearctxBg() { ctxBg.clearRect(0,0,800,500); } function Man() { this.SpriteSourceX = 10; this.SpriteSourceY = 540; this.width = 40; this.height = 115; this.DrawManOnScreenX = 100; this.DrawManOnScreenY = 260; this.speed = 10; this.actualFrame = 1; this.speed = 2; this.isUpKey = false; this.isRightKey = false; this.isDownKey = false; this.isLeftKey = false; } Man.prototype.draw = function () { clearCtxMan(); this.updateCoors(); this.checkDirection(); ctxMan.drawImage(imgSprite,this.SpriteSourceX,this.SpriteSourceY+this.height* this.actualFrame, this.width,this.height,this.DrawManOnScreenX,this.DrawManOnScreenY, this.width,this.height); } Man.prototype.updateCoors = function(){ this.leftX = this.DrawManOnScreenX; this.rightX = this.DrawManOnScreenX + this.width; this.topY = this.DrawManOnScreenY; this.bottomY = this.DrawManOnScreenY + this.height; } Man.prototype.checkDirection = function () { if (this.isUpKey && this.topY > 240) { this.DrawManOnScreenY -= this.speed; } if (this.isRightKey && this.rightX < 800) { this.DrawManOnScreenX += this.speed; } if (this.isDownKey && this.bottomY < 500) { this.DrawManOnScreenY += this.speed; } if (this.isLeftKey && this.leftX > 0) { this.DrawManOnScreenX -= this.speed; } if (this.isRightKey && this.rightX < 800) { if (this.actualFrame > 0) { this.actualFrame = 0; } else { this.actualFrame++; } } if (this.isLeftKey) { if (this.actualFrame > 2) { this.actualFrame = 2; } function checkKeyDown(var keyID = e.keyCode || e.which; if (keyID === 38) { Man1.isUpKey = true; e.preventDefault(); } if (keyID === 39 ) { Man1.isRightKey = true; e.preventDefault(); } if (keyID === 40 ) { Man1.isDownKey = true; e.preventDefault(); } if (keyID === 37 ) { Man1.isLeftKey = true; e.preventDefault(); } } function checkKeyUp(e) { var keyID = e.keyCode || e.which; if (keyID === 38 || keyID === 87) { Man1.isUpKey = false; e.preventDefault(); } if (keyID === 39 || keyID === 68) { Man1.isRightKey = false; e.preventDefault(); } if (keyID === 40 || keyID === 83) { Man1.isDownKey = false; e.preventDefault(); } if (keyID === 37 || keyID === 65) { Man1.isLeftKey = false; e.preventDefault(); } } function clearCtxMan() { ctxMan.clearRect(0,0,800,500); } function RedHouse() { this.srcX = 135; this.srcY = 525; this.width = 265; this.height = 245; this.drawX = 480; this.drawY = 85; } RedHouse.prototype.draw = function () { clearCtxRedHouse(); ctxRedHouse.drawImage(imgSprite,this.srcX,this.srcY, this.width,this.height,this.drawX,this.drawY,this.width,this.height); }; function clearCtxRedHouse() { ctxRedHouse.clearRect(0,0,800,500); } function loop() { if (isPlaying === true){ Man1.draw(); House1.draw(); requestAnimframe(loop); } } function startLoop(){ isPlaying = true; loop(); } function stopLoop(){ isPlaying = false; } </script> <style> .top{ position: absolute; top: 4px; left: 10px; color:black; } .top2{ position: absolute; top: 60px; left: 10px; color:black; } </style> <div class="top"> <p><font face="arial" color="black" size="4"><b>HGame</b><font/><p/> <p><font face="arial" color="black" size="3"> My Game Here <font/><p/> </div> <div class="top2"> <p><font face="arial" color="black" size="3"> It will start now <font/><p/> </div>

Read the article

Sorting the columns of an HTML table using JQuery

- by nikolaosk

In this post I will show you how easy is to sort the columns of an HTML table. I will use an external library,called Tablesorter which makes life so much easier for developers. ?here are other posts in my blog regarding JQuery.You can find them all here. You can find another post regarding HTML tables and JQuery here. We will demonstrate this with a step by step example. I will use Visual Studio 2012 Ultimate. You can also use Visual Studio 2012 Express Edition. You can also use VS 2010 editions. 1) Launch Visual Studio. Create an ASP.Net Empty Web application. Choose an appropriate name for your application. 2) Add a web form, default.aspx page to the application. 3) Add a table from the HTML controls tab control (from the Toolbox) on the default.aspx page 4) Now we need to download the JQuery library. Please visit the http://jquery.com/ and download the minified version.Then we need to download the Tablesorter JQuery plugin. Please donwload it, here. 5) We need to reference the JQuery library and the external JQuery Plugin. In the head section ? add the following lines. <script src="jquery-1_8_2_min.js" type="text/javascript"></script> <script src="jquery.tablesorter.js" type="text/javascript"></script>6) We need to type the HTML markup, the HTML table and its columns <body> <form id="form1" runat="server"> <div> <h1>Liverpool Legends</h1> <table style="width: 50%;" border="1" cellpadding="10" cellspacing ="10" class="liverpool"> <thead> <tr><th>Defenders</th><th>MidFielders</th><th>Strikers</th></tr> </thead> <tbody> <tr> <td>Alan Hansen</td> <td>Graeme Souness</td> <td>Ian Rush</td> </tr> <tr> <td>Alan Kennedy</td> <td>Steven Gerrard</td> <td>Michael Owen</td> </tr> <tr> <td>Jamie Garragher</td> <td>Kenny Dalglish</td> <td>Robbie Fowler</td> </tr> <tr> <td>Rob Jones</td> <td>Xabi Alonso</td> <td>Dirk Kuyt</td> </tr> </tbody> </table> </div> </form></body> 7) Inside the head section we also write the simple JQuery code. <script type="text/javascript"> $(document).ready(function() { $('.liverpool').tablesorter(); }); </script> 8) Run your application.This is how the HTML table looks before the table is sorted on the basis of the selected column. 9) Now I will click on the Midfielders header.Have a look at the picture below Tablesorter is an excellent JQuery plugin that makes sorting HTML tables a piece of cake. Hope it helps!!!

Read the article

Five Key Strategies in Master Data Management

- by david.butler(at)oracle.com

Here is a very interesting Profit Magazine article on MDM: A recent customer survey reveals the deleterious effects of data fragmentation. by Trevor Naidoo, December 2010 Across industries and geographies, IT organizations have grown in complexity, whether due to mergers and acquisitions, or decentralized systems supporting functional or departmental requirements. With systems architected over time to support unique, one-off process needs, they are becoming costly to maintain, and the Internet has only further added to the complexity. Data fragmentation has become a key inhibitor in delivering flexible, user-friendly systems. The Oracle Insight team conducted a survey assessing customers' master data management (MDM) capabilities over the past two years to get a sense of where they are in terms of their capabilities. The responses, by 27 respondents from six different industries, reveal five key areas in which customers need to improve their data management in order to get better financial results. 1. Less than 15 percent of organizations surveyed understand the sources and quality of their master data, and have a roadmap to address missing data domains. Examples of the types of master data domains referred to are customer, supplier, product, financial and site. Many organizations have multiple sources of master data with varying degrees of data quality in each source -- customer data stored in the customer relationship management system is inconsistent with customer data stored in the order management system. Imagine not knowing how many places you stored your customer information, and whether a customer's address was the most up to date in each source. In fact, more than 55 percent of the respondents in the survey manage their data quality on an ad-hoc basis. It is important for organizations to document their inventory of data sources and then profile these data sources to ensure that there is a consistent definition of key data entities throughout the organization. Some questions to ask are: How do we define a customer? What is a product? How do we define a site? The goal is to strive for one common repository for master data that acts as a cross reference for all other sources and ensures consistent, high-quality master data throughout the organization. 2. Only 18 percent of respondents have an enterprise data management strategy to ensure that data is treated as an asset to the organization. Most respondents handle data at the department or functional level and do not have an enterprise view of their master data. The sales department may track all their interactions with customers as they move through the sales cycle, the service department is tracking their interactions with the same customers independently, and the finance department also has a different perspective on the same customer. The salesperson may not be aware that the customer she is trying to sell to is experiencing issues with existing products purchased, or that the customer is behind on previous invoices. The lack of a data strategy makes it difficult for business users to turn data into information via reports. Without the key building blocks in place, it is difficult to create key linkages between customer, product, site, supplier and financial data. These linkages make it possible to understand patterns. A well-defined data management strategy is aligned to the business strategy and helps create the governance needed to ensure that data stewardship is in place and data integrity is intact. 3. Almost 60 percent of respondents have no strategy to integrate data across operational applications. Many respondents have several disparate sources of data with no strategy to keep them in sync with each other. Even though there is no clear strategy to integrate the data (see #2 above), the data needs to be synced and cross-referenced to keep the business processes running. About 55 percent of respondents said they perform this integration on an ad hoc basis, and in many cases, it is done manually with the help of Microsoft Excel spreadsheets. For example, a salesperson needs a report on global sales for a specific product, but the product has different product numbers in different countries. Typically, an analyst will pull all the data into Excel, manually create a cross reference for that product, and then aggregate the sales. The exact same procedure has to be followed if the same report is needed the following month. A well-defined consolidation strategy will ensure that a central cross-reference is maintained with updates in any one application being propagated to all the other systems, so that data is synchronized and up to date. This can be done in real time or in batch mode using integration technology. 4. Approximately 50 percent of respondents spend manual efforts cleansing and normalizing data. Information stored in various systems usually follows different standards and formats, making it difficult to match the data. A customer's address can be stored in different ways using a variety of abbreviations -- for example, "av" or "ave" for avenue. Similarly, a product's attributes can be stored in a number of different ways; for example, a size attribute can be stored in inches and can also be entered as "'' ". These types of variations make it difficult to match up data from different sources. Today, most customers rely on manual, heroic efforts to match, cleanse, and de-duplicate data -- clearly not a scalable, sustainable model. To solve this challenge, organizations need the ability to standardize data for customers, products, sites, suppliers and financial accounts; however, less than 10 percent of respondents have technology in place to automatically resolve duplicates. It is no wonder, therefore, that we get communications about products we don't own, at addresses we don't reside, and using channels (like direct mail) we don't like. An all-too-common example of a potential challenge follows: Customers end up receiving duplicate communications, which not only impacts customer satisfaction, but also incurs additional mailing costs. Cleansing, normalizing, and standardizing data will help address most of these issues. 5. Only 10 percent of respondents have the ability to share data that was mastered in a master data hub. Close to 60 percent of respondents have efforts in place that profile, standardize and cleanse data manually, and the output of these efforts are stored in spreadsheets in various parts of the organization. This valuable information is not easily shared with the rest of the organization and, more importantly, this enriched information cannot be sent back to the source systems so that the data is fixed at the source. A key benefit of a master data management strategy is not only to clean the data, but to also share the data back to the source systems as well as other systems that need the information. Aside from the source systems, another key beneficiary of this data is the business intelligence system. Having clean master data as input to business intelligence systems provides more accurate and enhanced reporting. Characteristics of Stellar MDM When deciding on the right master data management technology, organizations should look for solutions that have four main characteristics: enterprise-grade MDM performance complete technology that can be rapidly deployed and addresses multiple business issues end-to-end MDM process management with data quality monitoring and assurance pre-built MDM business relevant applications with data stores and workflows These master data management capabilities will aid in moving closer to a best-practice maturity level, delivering tremendous efficiencies and savings as well as revenue growth opportunities as a result of better understanding your customers. Trevor Naidoo is a senior director in Industry Strategy and Insight at Oracle.

Read the article

Corsair Hackers Reboot

It wasn't easy for me to attend but it was absolutely worth to go. The Linux User Group of Mauritius (LUGM) organised another get-together for any open source enthusiast here on the island. Strangely named "Corsair Hackers Reboot" but it stands for a positive cause: "Corsair Hackers Reboot Event A collaborative activity involving LUGM, UoM Computer Club, Fortune Way Shopping Mall and several geeks from around the island, striving to put FOSS into homes & offices. The public is invited to discover and explore Free Software & Open Source." And it was a good opportunity for me and the kids to visit the east coast of Mauritius, too. Perfect timing It couldn't have been better... Why? Well, for two important reasons (in terms of IT): End of support for Microsoft Windows XP - 08.04.2014 Release of Ubuntu 14.04 Long Term Support - 17.04.2014 Quite funnily, those two IT dates weren't the initial reasons and only during the weeks of preparations we put those together. And therefore it was even more positive to promote the use of Linux and open source software in general to a broader audience. Getting there ... Thanks to the new motor way M3 and all the additional road work which has been completed recently it was very simple to get across the island in a very quick and relaxed manner. Compared to my trips in the early days of living in Mauritius (and riding on a scooter) it was very smooth and within less than an hour we hit Centrale de Flacq. Well, being in the city doesn't necessarily mean that one has arrived at the destination. But thanks to modern technology I had a quick look on Google Maps, and we finally managed to get a parking behind the huge bus terminal in Flacq. From there it was just a short walk to Fortune Way. The children were trying to count the number of buses... Well, lots and lots of buses - really impressive actually. What was presented? There were different areas set up. Right at the entrance one's attention was directly drawn towards the elevated hacker's stage. Similar to rock stars performing their gig there was bunch of computers, laptops and networking equipment in order to cater the right working conditions for coding/programming challenge(s) on the one hand and for the pen-testing or system hacking competition on the other hand. Personally, I was very impresses that actually Nitin took care of the pen-testing competition. He hardly started one year back with Linux in general, and Kali Linux specifically. Seeing his personal development from absolute newbie to a decent Linux system administrator within such a short period of time, is really impressive. His passion to open source software made him a living. Next, clock-wise seen, was the Kid's Corner with face-painting as the main attraction. Additionally, there were numerous paper print outs to colour. Plus a decent workstation with the educational suite GCompris. Of course, my little ones were into that. They already know GCompris since a while as they are allowed to use it on an IGEL thin client terminal here at home. To simplify my life, I set up GCompris as full-screen guest session on the server, and they can pass the login screen without any further obstacles. And because it's a thin client hooked up to a XDMCP remote session I don't have to worry about the hardware on their desk, too. The next section was the main attraction of the event: BYOD - Bring Your Own Device Well, compared to the usual context of BYOD the corsairs had a completely different intention. Here, you could bring your own laptop and a team of knowledgeable experts - read: geeks and so on - offered to fully convert your system on any Linux distribution of your choice. And even though I came later, I was told that the USB pen drives had been in permanent use. From being prepared via dd command over launching LiveCD session to finally installing a fresh Linux system on bare metal. Most interestingly, I did a similar job already a couple of months ago, while upgrading an existing Windows XP system to Xubuntu 13.10. So far, the female owner is very happy and enjoys her system almost every evening to go shopping online, checking mails, and reading latest news from the Anime world. Back to the Hackers event, Ish told me that they managed approximately 20 conversion during the day. Furthermore, Ajay and others gladly assisted some visitors with some tricky issues and by the end of the day you can call is a success. While I was around, there was a elderly male visitor that got a full-fledged system conversion to a Linux system running completely in French language. A little bit more to the centre it was Yasir's turn to demonstrate his Arduino hardware that he hooked up with an experimental electrical circuit board connected to an LCD matrix display. That's the real spirit of hacking, and he showed some minor adjustments on the fly while demo'ing the system. Also, very interesting there was a thermal sensor around. Personally, I think that platforms like the Arduino as well as the Raspberry Pi have a great potential at a very affordable price in order to bring a better understanding of electronics as well as computer programming to a broader audience. It would be great to see more of those experiments during future activities. And last but not least there were a small number of vendors. Amongst them was Emtel - once again as sponsor of the general internet connectivity - and another hardware supplier from Riche Terre shopping mall. They had a good collection of Android related gimmicks, like a autonomous web cam that can convert any TV with HDMI connector into an online video chat system given WiFi. It's actually kind of awesome to have a Skype or Google hangout video session on the big screen rather than on the laptop. Some pictures of the event LUGM: Great conversations on Linux, open source and free software during the Corsair Hackers Reboot LUGM: Educational workstation running GCompris suite attracted the youngest attendees of the day. Of course, face painting had to be done prior to hacking... LUGM: Nadim demoing some Linux specifics to interested visitors. Everyone was pretty busy during the whole day LUGM: The hacking competition, here pen-testing a wireless connection and access point between multiple machines LUGM: Well prepared workstations to be able to 'upgrade' visitors' machines to any Linux operating system Final thoughts Gratefully, during the preparations of the event I was invited to leave some comments or suggestions, and the team of the LUGM did a great job. The outdoor banner was a eye-catcher, the various flyers and posters for the event were clearly written and as far as I understood from the quick chats I had with Ish, Nadim, Nitin, Ajay, and of course others all were very happy about the event execution. Great job, LUGM! And I'm already looking forward to the next Corsair Hackers Reboot event ... Crossing fingers: Very soon and hopefully this year again :) Update: In the media The event had been announced in local media, too. L'Express: Salon informatique: Hacking Challenge à Flacq

Read the article

Oracle Enterprise Manager Ops Center : Using Operational Profiles to Install Packages and other Content

- by LeonShaner

Oracle Enterprise Manager Ops Center provides numerous ways to deploy content, such as through OS Update Profiles, or as part of an OS Provisioning plan or combinations of those and other "Install Software" capabilities of Deployment Plans. This short "how-to" blog will highlight an alternative way to deploy content using Operational Profiles. Usually we think of Operational Profiles as a way to execute a simple "one-time" script to perform a basic system administration function, which can optionally be based on user input; however, Operational Profiles can be much more powerful than that. There is often more to performing an action than merely running a script -- sometimes configuration files, packages, binaries, and other scripts, etc. are needed to perform the action, and sometimes the user would like to leave such content on the system for later use. For shell scripts and other content written to be generic enough to work on any flavor of UNIX, converting the same scripts and configuration files into Solaris 10 SVR4 package, Solaris 11 IPS package, and/or a Linux RPM's might be seen as three times the work, for little appreciable gain. That is where using an Operational Profile to deploy simple scripts and other generic content can be very helpful. The approach is so powerful, that pretty much any kind of content can be deployed using an Operational Profile, provided the files involved are not overly large, and it is not necessary to convert the content into UNIX variant-specific formats. The basic formula for deploying content with an Operational Profile is as follows: Begin with a traditional script header, which is a UNIX shell script that will be responsible for decoding and extracting content, copying files into the right places, and executing any other scripts and commands needed to install and configure that content. Include steps to make the script platform-aware, to do the right thing for a given UNIX variant, or a "sorry" message if the operator has somehow tried to run the Operational Profile on a system where the script is not designed to run. Ops Center can constrain execution by target type, so such checks at this level are an added safeguard, but also useful with the generic target type of "Operating System" where the admin wants the script to "do the right thing," whatever the UNIX variant. Include helpful output to show script progress, and any other informational messages that can help the admin determine what has gone wrong in the case of a problem in script execution. Such messages will be shown in the job execution log. Include necessary "clean up" steps for normal and error exit conditions Set non-zero exit codes when appropriate -- a non-zero exit code will cause an Operational Profile job to be marked failed, which is the admin's cue to look into the job details for diagnostic messages in the output from the script. That first bullet deserves some explanation. If Operational Profiles are usually simple "one-time" scripts and binary content is not allowed, then how does the actual content, packages, binaries, and other scripts get delivered along with the script? More specifically, how does one include such content without needing to first create some kind of traditional package? All that is required is to simply encode the content and append it to the end of the Operational Profile. The header portion of the Operational Profile will need to contain the commands to decode the embedded content that has been appended to the bottom of the script. The header code can do whatever else is needed, and finally clean up any intermediate files that were created during the decoding and extraction of the content. One way to encode binary and other content for inclusion in a script is to use the "uuencode" utility to convert the content into simple base64 ASCII text -- a form that is suitable to be appended to an Operational Profile. The behavior of the "uudecode" utility is such that it will skip over any parts of the input that do not fit the uuencoded "begin" and "end" clauses. For that reason, your header script will be skipped over, and uudecode will find your embedded content, that you will uuencode and paste at the end of the Operational Profile. You can have as many "begin" / "end" clauses as you need -- just separate each embedded file by an empty line between "begin" and "end" clauses. Example: Install SUNWsneep and set the system serial number Script: deploySUNWsneep.sh ( <- right-click / save to download) Highlights: #!/bin/sh # Required variables: OC_SERIAL="$OC_SERIAL" # The user-supplied serial number for the asset ... Above is a good practice, showing right up front what kind of input the Operational Profile will require. The right-hand side where $OC_SERIAL appears in this example will be filled in by Ops Center based on the user input at deployment time. The script goes on to restrict the use of the program to the intended OS type (Solaris 10 or older, in this example, but other content might be suitable for Solaris 11, or Linux -- it depends on the content and the script that will handle it). A temporary working directory is created, and then we have the command that decodes the embedded content from "self" which in scripting terms is $0 (a variable that expands to the name of the currently executing script): # Pass myself through uudecode, which will extract content to the current dir uudecode $0 At that point, whatever content was appended in uuencoded form at the end of the script has been written out to the current directory. In this example that yields a file, SUNWsneep.7.0.zip, which the rest of the script proceeds to unzip, and pkgadd, followed by running "/opt/SUNWsneep/bin/sneep -s $OC_SERIAL" which is the command that stores the system serial for future use by other programs such as Explorer. Don't get hung up on the example having used a pkgadd command. The content started as a zip file and it could have been a tar.gz, or any other file. This approach simply decodes the file. The header portion of the script has to make sense of the file and do the right thing (e.g. it's up to you). The script goes on to clean up after itself, whether or not the above was successful. Errors are echo'd by the script and a non-zero exit code is set where appropriate. Second to last, we have: # just in case, exit explicitly, so that uuencoded content will not cause error OPCleanUP exit # The rest of the script is ignored, except by uudecode # # UUencoded content follows # # e.g. for each file needed, # $ uuencode -m {source} {source} > {target}.uu5 # then paste the {target}.uu5 files below # they will be extracted into the workding dir at $TDIR # The commentary above also describes how to encode the content. Finally we have the uuencoded content: begin-base64 444 SUNWsneep.7.0.zip UEsDBBQAAAAIAPsRy0Di3vnukAAAAMcAAAAKABUAcmVhZG1lLnR4dFVUCQADOqnVT7up ... VXgAAFBLBQYAAAAAAgACAJEAAADTNwEAAAA= ==== That last line of "====" is the base64 uuencode equivalent of a blank line, followed by "end" and as mentioned you can have as many begin/end clauses as you need. Just separate each embedded file by a blank line after each ==== and before each begin-base64. Deploying the example Operational Profile looks like this (where I have pasted the system serial number into the required field): The job succeeded, but here is an example of the kind of diagnostic messages that the example script produces, and how Ops Center displays them in the job details: This same general approach could be used to deploy Explorer, and other useful utilities and scripts. Please let us know what you think? Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager web page or follow us at : Twitter | Facebook | YouTube | Linkedin | Newsletter

Read the article

TGIF: Engagement Wrap-up

- by Michael Snow

We've had a very busy week here at Oracle and as we build up to Oracle OpenWorld starting in less than 10 days - it doesn't look like things will be slowing down. Engagement is definitely in the air this week. Our friend, John Mancini published a great article entitled: "The World of Engagement" on his Digital Landfill blog yesterday and we hosted a great webcast with R "Ray" Wang from Constellation Research yesterday on the "9 C's of Engagement". 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} I wanted to wrap-up the week with some key takeaways from our webcast yesterday with Ray Wang. If you missed the webcast yesterday, fear not - it is now available On-Demand. We'll leave you this week with lots of questions about how to navigate these churning waters of engagement. Stay tuned to the Oracle WebCenter Social Business Thought Leaders Webcast Series as we fuel this dialogue. 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Company Culture Does company support a culture of putting customer satisfaction ahead of profits? Does culture promote creativity and cross functional employee collaboration? Does culture accept different views of multi-generational workforce? Does culture promote employee training and skills development Does culture support upward mobility and long term retention? Does culture support work-life balance? Does the culture provide rewards for employee for outstanding customer support? Channels What are the current primary channels for customer communications? What do you think will be the primary channels in two years? Is company developing support model for emerging channels? Do all channels consistently deliver the same level of customer support? Do you know the cost per transaction across all channels? Do you engage customers proactively across multiple channels? Do all channels have access to the same customer information? Community Does company extend customer support into virtual communities of interest? Does company facilitate educating users through its virtual communities? Does company mine its customer’s experience into useful data? Does company increase the value for customers through using data to deliver new products and services? Does company support two way interactions with its customers through communities of interest? Does company actively support social CRM, online communities and social media markets? Credibility Does company market its trustworthiness through external certificates such as business licenses, BBB certificates or other validations? Does company promote trust through customer testimonials and case studies on ethical business practices? Does company promote truthful market campaigns Does company make it easy for customers to complain? Does company build its reputation for standing behind its products with guarantees for satisfaction? Does company protect its customer data with high security measures> Content What sources do you use to create customer content? Does company mine social media and blogs for customer content? How does your company sort, store and retain its customer content? How frequently does content get updated? What external sources do you use for customer content? How many responses are typically received from a knowledge management system inquiry? Does your company use customer content to design and develop new product and services? Context Does your company market to customers in clusters or individually? Does your company customize its messages and personalize them to specific needs of each individual customer? Does your company store customer data based on their past behaviors, purchases, sentiment analysis and current activities? Does your company manage customer context according to channels used? For example identify personal use channels versus business channels? What is your frequency of collecting customer activities across various touch points? How is your customer data stored and analyzed? Is contextual data used for future customer outreach? Cadence Which channels does your company measure-web site visits, phone calls, IVR, store visits, face to face, social media? Does company make effective use of cross channel marketing to promote more frequent customer engagement? Does your company rate the patterns relevant for your product or service and monitor usage against this pattern? Does your company measure the frequency of both online and offline channels? Does your company apply metrics to the frequency of customer engagements with product or services revenues? Does your company consolidate data for customer engagement across various channels for a complete view of its customer? Catalyst Does company offer coupon discounts? Does company have a customer loyalty program or a VIP membership program? Does company mine customer data to target specific groups of buyers? Do internal employees serve as ambassadors for customer programs? Does company drive loyalty through social media loyalty programs? Does company build rewards based on using loyalty data? Does company offer an employee incentive program to drive customer loyalty?

Read the article

Why people don't patch and upgrade?!?

- by Mike Dietrich

Discussing the topic "Why Upgrade" or "Why not Upgrade" is not always fun. Actually the arguments repeat from customer to customer. Typically we hear things such as: A PSU or Patch Set introduces new bugs A new PSU or Patch Set introduces new features which lead to risk and require application verification Patching means risk Patching changes the execution plans Patching requires too much testing Patching is too much work for our DBAs Patching costs a lot of money and doesn't pay out And to be very honest sometimes it's hard for me to stay calm in such discussions. Let's discuss some of these points a bit more in detail. A PSU or Patch Set introduces new bugsWell, yes, that is true as no software containing more than some lines of code is bug free. This applies to Oracle's code as well as too any application or operating system code. But first of all, does that mean you never patch your OS because the patch may introduce new flaws? And second, what is the point of saying "it introduces new bugs"? Does that mean you will never get rid of the mean issues we know about and we fixed already? Scroll down from MOS Note:161818.1 to the patch release you are on, no matter if it's 10.2.0.4 or 11.2.0.3 and check for the Known Issues And Alerts.Will you take responsibility to know about all these issues and refuse to upgrade to 11.2.0.4? I won't. A new PSU or Patch Set introduces new featuresOk, we can discuss that. Offering new functionality within a database patch set is a dubious thing. It has advantages such as in 11.2.0.4 where we backported Database Redaction to. But this is something you will only use once you have an Advanced Security license. I interpret that statement I've heard quite often from customers in a different way: People don't want to get surprises such as new behaviour. This certainly gives everybody a hard time. And we've had many examples in the past (SESSION_CACHED_CURSROS in 10.2.0.4, _DATAFILE_WRITE_ERRORS_CRASH_INSTANCE in 11.2.0.2 and others) where those things weren't documented, not even in the README. Thanks to many friends out there I learned about those as well. So new behaviour is the topic people consider as risky - not really new features. And just to point this out: A PSU never brings in new features or new behaviour by definition! Patching means riskDoes it really mean risk? Yes, there were issues in the past (and sometimes in the present as well) where a patch didn't get installed correctly. But personally I consider it way more risky to not patch. Keep that in mind: The day Oracle publishes an PSU (or CPU) containing security fixes all the great security experts out there go public with their findings as well. So from that day on even my grandma can find out about those issues and try to attack somebody. Now a lot of people say: "My database does not face the internet." And I will answer: "The enemy is sitting already behind your firewalls. And knows potentially about these things." My statement: Not patching introduces way more risk to your environment than patching. Seriously! Patching changes the execution plansDo they really? I agree - there's a very small risk for this happening with Patch Sets. But not with PSUs or CPUs as they contain no optimizer fixes changing behaviour (but they may contain fixes curing wrong-query-result-bugs). But what's the point of a changing execution plan? In Oracle Database 11g it is so simple to be prepared. SQL Plan Management is a free EE feature - so once that occurs you'll put the plan into the Plan Baseline. Basta! Yes, you wouldn't like to get such surprises? Than please use the SQL Performance Analyzer (SPA) from Real Application Testing and you'll detect that easily upfront in minutes. And not to forget this, a plan change can also be very positive!Yes, there's a little risk with a database patchset - and we have many possibilites to detect this before patching. Patching requires too much testingWell, does it really? I have seen in the past 12 years how people test. There are very different efforts and approaches on this. I have seen people spending a hell of money on licenses or on project team staffing. And I have seen people sailing blindly without any tests just going the John-Wayne-approach.Proper tools will allow you to test easily without too much efforts. See the paragraph above. We have used Real Application Testing in so many customer projects reducing the amount of work spend on testing by over 50%. But apart from that at some point you will have to stop testing. If you don't you'll get lost and you'll burn money. There's no 100% guaranty. You will have to deal with a little risk as reaching the final 5% of certainty will cost you the same as it did cost to reach 95%. And doing this will lead to abnormal long product cycles that you'll run behind forever. And this will cost even more money. Patching is too much work for our DBAsPatching is a lot of work. I agree. And it's no fun work. It's boring, annoying. You don't learn much from that. That's why you should try to automate this task. Use the Database's Lifecycle Management Pack. And don't cry about the fact that it costs money. Yes it does. But it will ease the process and you'll save a lot of costs as you don't waste your valuable time with patching. Or use Oracle Database 12c Oracle Multitenant and patch either by unplug/plug or patch an entire container database with all PDBs with one patch in one task. We have customer reference cases proofing it saved them 75% of time, effort and cost since they've used Lifecycle Management Pack. So why don't you use it? Patching costs a lot of money and doesn't pay outWell, see my statements in the paragraph above. And it pays out as flying with a database with 100 known critical flaws in it which are already fixed by Oracle (such as in the Oct 2013 PSU for Oracle Database 12c) will cost ways more in case of failure or even data loss. Bet with me? Let me finally ask you some questions. What cell phone are you using and which OS does it run? Do you have an iPhone 5 and did you upgrade already to iOS 7.0.3? I've just encountered on mine that the alarm (which I rely on when traveling) has gotten now a dependency on the physical switch "sound on/off". If it is switched to "off" physically the alarm rings "silently". What a wonderful example of a behaviour change coming in with a patch set. Will this push you to stay with iOS5 or iOS6? No, because those have security flaws which won't be fixed anymore. What browser are you surfing with? Do you use Mozilla 3.6? Well, congratulations to all the hackers. It will be easy for them to attack you and harm your system. I'd guess you have the auto updater on. Same for Google Chrome, Safari, IE. Right? -Mike The T.htmtableborders, .htmtableborders td, .htmtableborders th {border : 1px dashed lightgrey ! important;} html, body { border: 0px; } body { background-color: #ffffff; } img, hr { cursor: default }

Read the article

Scheduling thread tiles with C++ AMP

- by Daniel Moth

This post assumes you are totally comfortable with, what some of us call, the simple model of C++ AMP, i.e. you could write your own matrix multiplication. We are now ready to explore the tiled model, which builds on top of the non-tiled one. Tiling the extent We know that when we pass a grid (which is just an extent under the covers) to the parallel_for_each call, it determines the number of threads to schedule and their index values (including dimensionality). For the single-, two-, and three- dimensional cases you can go a step further and subdivide the threads into what we call tiles of threads (others may call them thread groups). So here is a single-dimensional example: extent<1> e(20); // 20 units in a single dimension with indices from 0-19 grid<1> g(e); // same as extent tiled_grid<4> tg = g.tile<4>(); …on the 3rd line we subdivided the single-dimensional space into 5 single-dimensional tiles each having 4 elements, and we captured that result in a concurrency::tiled_grid (a new class in amp.h). Let's move on swiftly to another example, in pictures, this time 2-dimensional: So we start on the left with a grid of a 2-dimensional extent which has 8*6=48 threads. We then have two different examples of tiling. In the first case, in the middle, we subdivide the 48 threads into tiles where each has 4*3=12 threads, hence we have 2*2=4 tiles. In the second example, on the right, we subdivide the original input into tiles where each has 2*2=4 threads, hence we have 4*3=12 tiles. Notice how you can play with the tile size and achieve different number of tiles. The numbers you pick must be such that the original total number of threads (in our example 48), remains the same, and every tile must have the same size. Of course, you still have no clue why you would do that, but stick with me. First, we should see how we can use this tiled_grid, since the parallel_for_each function that we know expects a grid. Tiled parallel_for_each and tiled_index It turns out that we have additional overloads of parallel_for_each that accept a tiled_grid instead of a grid. However, those overloads, also expect that the lambda you pass in accepts a concurrency::tiled_index (new in amp.h), not an index<N>. So how is a tiled_index different to an index? A tiled_index object, can have only 1 or 2 or 3 dimensions (matching exactly the tiled_grid), and consists of 4 index objects that are accessible via properties: global, local, tile_origin, and tile. The global index is the same as the index we know and love: the global thread ID. The local index is the local thread ID within the tile. The tile_origin index returns the global index of the thread that is at position 0,0 of this tile, and the tile index is the position of the tile in relation to the overall grid. Confused? Here is an example accompanied by a picture that hopefully clarifies things: array_view<int, 2> data(8, 6, p_my_data); parallel_for_each(data.grid.tile<2,2>(), [=] (tiled_index<2,2> t_idx) restrict(direct3d) { /* todo */ }); Given the code above and the picture on the right, what are the values of each of the 4 index objects that the t_idx variables exposes, when the lambda is executed by T (highlighted in the picture on the right)? If you can't work it out yourselves, the solution follows: t_idx.global = index<2> (6,3) t_idx.local = index<2> (0,1) t_idx.tile_origin = index<2> (6,2) t_idx.tile = index<2> (3,1) Don't move on until you are comfortable with this… the picture really helps, so use it. Tiled Matrix Multiplication Example – part 1 Let's paste here the C++ AMP matrix multiplication example, bolding the lines we are going to change (can you guess what the changes will be?) 01: void MatrixMultiplyTiled_Part1(vector<float>& vC, const vector<float>& vA, const vector<float>& vB, int M, int N, int W) 02: { 03: 04: array_view<const float,2> a(M, W, vA); 05: array_view<const float,2> b(W, N, vB); 06: array_view<writeonly<float>,2> c(M, N, vC); 07: parallel_for_each(c.grid, 08: [=](index<2> idx) restrict(direct3d) { 09: 10: int row = idx[0]; int col = idx[1]; 11: float sum = 0.0f; 12: for(int i = 0; i < W; i++) 13: sum += a(row, i) * b(i, col); 14: c[idx] = sum; 15: }); 16: } To turn this into a tiled example, first we need to decide our tile size. Let's say we want each tile to be 16*16 (which assumes that we'll have at least 256 threads to process, and that c.grid.extent.size() is divisible by 256, and moreover that c.grid.extent[0] and c.grid.extent[1] are divisible by 16). So we insert at line 03 the tile size (which must be a compile time constant). 03: static const int TS = 16; ...then we need to tile the grid to have tiles where each one has 16*16 threads, so we change line 07 to be as follows 07: parallel_for_each(c.grid.tile<TS,TS>(), ...that means that our index now has to be a tiled_index with the same characteristics as the tiled_grid, so we change line 08 08: [=](tiled_index<TS, TS> t_idx) restrict(direct3d) { ...which means, without changing our core algorithm, we need to be using the global index that the tiled_index gives us access to, so we insert line 09 as follows 09: index<2> idx = t_idx.global; ...and now this code just works and it is tiled! Closing thoughts on part 1 The process we followed just shows the mechanical transformation that can take place from the simple model to the tiled model (think of this as step 1). In fact, when we wrote the matrix multiplication example originally, the compiler was doing this mechanical transformation under the covers for us (and it has additional smarts to deal with the cases where the total number of threads scheduled cannot be divisible by the tile size). The point is that the thread scheduling is always tiled, even when you use the non-tiled model. But with this mechanical transformation, we haven't gained anything… Hint: our goal with explicitly using the tiled model is to gain even more performance. In the next post, we'll evolve this further (beyond what the compiler can automatically do for us, in this first release), so you can see the full usage of the tiled model and its benefits… Comments about this post by Daniel Moth welcome at the original blog.

Read the article

Per-pixel displacement mapping GLSL

- by Chris

Im trying to implement a per-pixel displacement shader in GLSL. I read through several papers and "tutorials" I found and ended up with trying to implement the approach NVIDIA used in their Cascade Demo (http://www.slideshare.net/icastano/cascades-demo-secrets) starting at Slide 82. At the moment I am completly stuck with following problem: When I am far away the displacement seems to work. But as more I move closer to my surface, the texture gets bent in x-axis and somehow it looks like there is a little bent in general in one direction. EDIT: I added a video: click I added some screen to illustrate the problem: Well I tried lots of things already and I am starting to get a bit frustrated as my ideas run out. I added my full VS and FS code: VS: #version 400 layout(location = 0) in vec3 IN_VS_Position; layout(location = 1) in vec3 IN_VS_Normal; layout(location = 2) in vec2 IN_VS_Texcoord; layout(location = 3) in vec3 IN_VS_Tangent; layout(location = 4) in vec3 IN_VS_BiTangent; uniform vec3 uLightPos; uniform vec3 uCameraDirection; uniform mat4 uViewProjection; uniform mat4 uModel; uniform mat4 uView; uniform mat3 uNormalMatrix; out vec2 IN_FS_Texcoord; out vec3 IN_FS_CameraDir_Tangent; out vec3 IN_FS_LightDir_Tangent; void main( void ) { IN_FS_Texcoord = IN_VS_Texcoord; vec4 posObject = uModel * vec4(IN_VS_Position, 1.0); vec3 normalObject = (uModel * vec4(IN_VS_Normal, 0.0)).xyz; vec3 tangentObject = (uModel * vec4(IN_VS_Tangent, 0.0)).xyz; //vec3 binormalObject = (uModel * vec4(IN_VS_BiTangent, 0.0)).xyz; vec3 binormalObject = normalize(cross(tangentObject, normalObject)); // uCameraDirection is the camera position, just bad named vec3 fvViewDirection = normalize( uCameraDirection - posObject.xyz); vec3 fvLightDirection = normalize( uLightPos.xyz - posObject.xyz ); IN_FS_CameraDir_Tangent.x = dot( tangentObject, fvViewDirection ); IN_FS_CameraDir_Tangent.y = dot( binormalObject, fvViewDirection ); IN_FS_CameraDir_Tangent.z = dot( normalObject, fvViewDirection ); IN_FS_LightDir_Tangent.x = dot( tangentObject, fvLightDirection ); IN_FS_LightDir_Tangent.y = dot( binormalObject, fvLightDirection ); IN_FS_LightDir_Tangent.z = dot( normalObject, fvLightDirection ); gl_Position = (uViewProjection*uModel) * vec4(IN_VS_Position, 1.0); } The VS just builds the TBN matrix, from incoming normal, tangent and binormal in world space. Calculates the light and eye direction in worldspace. And finally transforms the light and eye direction into tangent space. FS: #version 400 // uniforms uniform Light { vec4 fvDiffuse; vec4 fvAmbient; vec4 fvSpecular; }; uniform Material { vec4 diffuse; vec4 ambient; vec4 specular; vec4 emissive; float fSpecularPower; float shininessStrength; }; uniform sampler2D colorSampler; uniform sampler2D normalMapSampler; uniform sampler2D heightMapSampler; in vec2 IN_FS_Texcoord; in vec3 IN_FS_CameraDir_Tangent; in vec3 IN_FS_LightDir_Tangent; out vec4 color; vec2 TraceRay(in float height, in vec2 coords, in vec3 dir, in float mipmap){ vec2 NewCoords = coords; vec2 dUV = - dir.xy * height * 0.08; float SearchHeight = 1.0; float prev_hits = 0.0; float hit_h = 0.0; for(int i=0;i<10;i++){ SearchHeight -= 0.1; NewCoords += dUV; float CurrentHeight = textureLod(heightMapSampler,NewCoords.xy, mipmap).r; float first_hit = clamp((CurrentHeight - SearchHeight - prev_hits) * 499999.0,0.0,1.0); hit_h += first_hit * SearchHeight; prev_hits += first_hit; } NewCoords = coords + dUV * (1.0-hit_h) * 10.0f - dUV; vec2 Temp = NewCoords; SearchHeight = hit_h+0.1; float Start = SearchHeight; dUV *= 0.2; prev_hits = 0.0; hit_h = 0.0; for(int i=0;i<5;i++){ SearchHeight -= 0.02; NewCoords += dUV; float CurrentHeight = textureLod(heightMapSampler,NewCoords.xy, mipmap).r; float first_hit = clamp((CurrentHeight - SearchHeight - prev_hits) * 499999.0,0.0,1.0); hit_h += first_hit * SearchHeight; prev_hits += first_hit; } NewCoords = Temp + dUV * (Start - hit_h) * 50.0f; return NewCoords; } void main( void ) { vec3 fvLightDirection = normalize( IN_FS_LightDir_Tangent ); vec3 fvViewDirection = normalize( IN_FS_CameraDir_Tangent ); float mipmap = 0; vec2 NewCoord = TraceRay(0.1,IN_FS_Texcoord,fvViewDirection,mipmap); //vec2 ddx = dFdx(NewCoord); //vec2 ddy = dFdy(NewCoord); vec3 BumpMapNormal = textureLod(normalMapSampler, NewCoord.xy, mipmap).xyz; BumpMapNormal = normalize(2.0 * BumpMapNormal - vec3(1.0, 1.0, 1.0)); vec3 fvNormal = BumpMapNormal; float fNDotL = dot( fvNormal, fvLightDirection ); vec3 fvReflection = normalize( ( ( 2.0 * fvNormal ) * fNDotL ) - fvLightDirection ); float fRDotV = max( 0.0, dot( fvReflection, fvViewDirection ) ); vec4 fvBaseColor = textureLod( colorSampler, NewCoord.xy,mipmap); vec4 fvTotalAmbient = fvAmbient * fvBaseColor; vec4 fvTotalDiffuse = fvDiffuse * fNDotL * fvBaseColor; vec4 fvTotalSpecular = fvSpecular * ( pow( fRDotV, fSpecularPower ) ); color = ( fvTotalAmbient + (fvTotalDiffuse + fvTotalSpecular) ); } The FS implements the displacement technique in TraceRay method, while always using mipmap level 0. Most of the code is from NVIDIA sample and another paper I found on the web, so I guess there cannot be much wrong in here. At the end it uses the modified UV coords for getting the displaced normal from the normal map and the color from the color map. I looking forward for some ideas. Thanks in advance! Edit: Here is the code loading the heightmap: glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, mWidth, mHeight, 0, GL_RGBA, GL_UNSIGNED_BYTE, mImageData); glGenerateMipmap(GL_TEXTURE_2D); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR_MIPMAP_LINEAR); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR_MIPMAP_LINEAR); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); //glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); Maybe something wrong in here?

Read the article

We've completed the first iteration

- by CliveT

There are a lot of features in C# that are implemented by the compiler and not by the underlying platform. One such feature is a lambda expression. Since local variables cannot be accessed once the current method activation finishes, the compiler has to go out of its way to generate a new class which acts as a home for any variable whose lifetime needs to be extended past the activation of the procedure. Take the following example: Random generator = new Random(); Func func = () = generator.Next(10); In this case, the compiler generates a new class called c_DisplayClass1 which is marked with the CompilerGenerated attribute. [CompilerGenerated] private sealed class c__DisplayClass1 { // Fields public Random generator; // Methods public int b__0() { return this.generator.Next(10); } } Two quick comments on this: (i) A display was the means that compilers for languages like Algol recorded the various lexical contours of the nested procedure activations on the stack. I imagine that this is what has led to the name. (ii) It is a shame that the same attribute is used to mark all compiler generated classes as it makes it hard to figure out what they are being used for. Indeed, you could imagine optimisations that the runtime could perform if it knew that classes corresponded to certain high level concepts. We can see that the local variable generator has been turned into a field in the class, and the body of the lambda expression has been turned into a method of the new class. The code that builds the Func object simply constructs an instance of this class and initialises the fields to their initial values. c__DisplayClass1 class2 = new c__DisplayClass1(); class2.generator = new Random(); Func func = new Func(class2.b__0); Reflector already contains code to spot this pattern of code and reproduce the form containing the lambda expression, so this is example is correctly decompiled. The use of compiler generated code is even more spectacular in the case of iterators. C# introduced the idea of a method that could automatically store its state between calls, so that it can pick up where it left off. The code can express the logical flow with yield return and yield break denoting places where the method should return a particular value and be prepared to resume. { yield return 1; yield return 2; yield return 3; } Of course, there was already a .NET pattern for expressing the idea of returning a sequence of values with the computation proceeding lazily (in the sense that the work for the next value is executed on demand). This is expressed by the IEnumerable interface with its Current property for fetching the current value and the MoveNext method for forcing the computation of the next value. The sequence is terminated when this method returns false. The C# compiler links these two ideas together so that an IEnumerator returning method using the yield keyword causes the compiler to produce the implementation of an Iterator. Take the following piece of code. IEnumerable GetItems() { yield return 1; yield return 2; yield return 3; } The compiler implements this by defining a new class that implements a state machine. This has an integer state that records which yield point we should go to if we are resumed. It also has a field that records the Current value of the enumerator and a field for recording the thread. This latter value is used for optimising the creation of iterator instances. [CompilerGenerated] private sealed class d__0 : IEnumerable, IEnumerable, IEnumerator, IEnumerator, IDisposable { // Fields private int 1__state; private int 2__current; public Program 4__this; private int l__initialThreadId; The body gets converted into the code to construct and initialize this new class. private IEnumerable GetItems() { d__0 d__ = new d__0(-2); d__.4__this = this; return d__; } When the class is constructed we set the state, which was passed through as -2 and the current thread. public d__0(int 1__state) { this.1__state = 1__state; this.l__initialThreadId = Thread.CurrentThread.ManagedThreadId; } The state needs to be set to 0 to represent a valid enumerator and this is done in the GetEnumerator method which optimises for the usual case where the returned enumerator is only used once. IEnumerator IEnumerable.GetEnumerator() { if ((Thread.CurrentThread.ManagedThreadId == this.l__initialThreadId) && (this.1__state == -2)) { this.1__state = 0; return this; } The state machine itself is implemented inside the MoveNext method. private bool MoveNext() { switch (this.1__state) { case 0: this.1__state = -1; this.2__current = 1; this.1__state = 1; return true; case 1: this.1__state = -1; this.2__current = 2; this.1__state = 2; return true; case 2: this.1__state = -1; this.2__current = 3; this.1__state = 3; return true; case 3: this.1__state = -1; break; } return false; } At each stage, the current value of the state is used to determine how far we got, and then we generate the next value which we return after recording the next state. Finally we return false from the MoveNext to signify the end of the sequence. Of course, that example was really simple. The original method body didn't have any local variables. Any local variables need to live between the calls to MoveNext and so they need to be transformed into fields in much the same way that we did in the case of the lambda expression. More complicated MoveNext methods are required to deal with resources that need to be disposed when the iterator finishes, and sometimes the compiler uses a temporary variable to hold the return value. Why all of this explanation? We've implemented the de-compilation of iterators in the current EAP version of Reflector (7). This contrasts with previous version where all you could do was look at the MoveNext method and try to figure out the control flow. There's a fair amount of things we have to do. We have to spot the use of a CompilerGenerated class which implements the Enumerator pattern. We need to go to the class and figure out the fields corresponding to the local variables. We then need to go to the MoveNext method and try to break it into the various possible states and spot the state transitions. We can then take these pieces and put them back together into an object model that uses yield return to show the transition points. After that Reflector can carry on optimising using its usual optimisations. The pattern matching is currently a little too sensitive to changes in the code generation, and we only do a limited analysis of the MoveNext method to determine use of the compiler generated fields. In some ways, it is a pity that iterators are compiled away and there is no metadata that reflects the original intent. Without it, we are always going to dependent on our knowledge of the compiler's implementation. For example, we have noticed that the Async CTP changes the way that iterators are code generated, so we'll have to do some more work to support that. However, with that warning in place, we seem to do a reasonable job of decompiling the iterators that are built into the framework. Hopefully, the EAP will give us a chance to find examples where we don't spot the pattern correctly or regenerate the wrong code, and we can improve things. Please give it a go, and report any problems.

Read the article

<%: %>, HtmlEncode, IHtmlString and MvcHtmlString

- by Shaun

One of my colleague and friend, Robin is playing and struggling with the ASP.NET MVC 2 on a project these days while I’m struggling with a annoying client. Since it’s his first time to use ASP.NET MVC he was meetings with a lot of problem and I was very happy to share my experience to him. Yesterday he asked me when he attempted to insert a <br /> element into his page he found that the page was rendered like this which is bad. He found his <br /> was shown as a part of the string rather than creating a new line. After checked a bit in his code I found that it’s because he utilized a new ASP.NET markup supported in .NET 4.0 – “<%: %>”. If you have been using ASP.NET MVC 1 or in .NET 3.5 world it would be very common that using <%= %> to show something on the page from the backend code. But when you do it you must ensure that the string that are going to be displayed should be Html-safe, which means all the Html markups must be encoded. Otherwise this might cause an XSS (cross-site scripting) problem. So that you’d better use the code like this below to display anything on the page. In .NET 4.0 Microsoft introduced a new markup to solve this problem which is <%: %>. It will encode the content automatically so that you will no need to check and verify your code manually for the XSS issue mentioned below. But this also means that it will encode all things, include the Html element you want to be rendered. So I changed his code like this and it worked well. After helped him solved this problem and finished a spreadsheet for my boring project I considered a bit more on the <%: %>. Since it will encode all thing why it renders correctly when we use “<%: Html.TextBox(“name”) %>” to show a text box? As you know the Html.TextBox will render a “<input name="name" id="name" type="text"/>” element on the page. If <%: %> will encode everything it should not display a text box. So I dig into the source code of the MVC and found some comments in the class MvcHtmlString. 1: // In ASP.NET 4, a new syntax <%: %> is being introduced in WebForms pages, where <%: expression %> is equivalent to 2: // <%= HttpUtility.HtmlEncode(expression) %>. The intent of this is to reduce common causes of XSS vulnerabilities 3: // in WebForms pages (WebForms views in the case of MVC). This involves the addition of an interface 4: // System.Web.IHtmlString and a static method overload System.Web.HttpUtility::HtmlEncode(object). The interface 5: // definition is roughly: 6: // public interface IHtmlString { 7: // string ToHtmlString(); 8: // } 9: // And the HtmlEncode(object) logic is roughly: 10: // - If the input argument is an IHtmlString, return argument.ToHtmlString(), 11: // - Otherwise, return HtmlEncode(Convert.ToString(argument)). 12: // 13: // Unfortunately this has the effect that calling <%: Html.SomeHelper() %> in an MVC application running on .NET 4 14: // will end up encoding output that is already HTML-safe. As a result, we're changing out HTML helpers to return 15: // MvcHtmlString where appropriate. <%= Html.SomeHelper() %> will continue to work in both .NET 3.5 and .NET 4, but 16: // changing the return types to MvcHtmlString has the added benefit that <%: Html.SomeHelper() %> will also work 17: // properly in .NET 4 rather than resulting in a double-encoded output. MVC developers in .NET 4 will then be able 18: // to use the <%: %> syntax almost everywhere instead of having to remember where to use <%= %> and where to use 19: // <%: %>. This should help developers craft more secure web applications by default. 20: // 21: // To create an MvcHtmlString, use the static Create() method instead of calling the protected constructor. The comment said the encoding rule of the <%: %> would be: If the type of the content is IHtmlString it will NOT encode since the IHtmlString indicates that it’s Html-safe. Otherwise it will use HtmlEncode to encode the content. If we check the return type of the Html.TextBox method we will find that it’s MvcHtmlString, which was implemented the IHtmlString interface dynamically. That is the reason why the “<input name="name" id="name" type="text"/>” was not encoded by <%: %>. So if we want to tell ASP.NET MVC, or I should say the ASP.NET runtime that the content is Html-safe and no need, or should not be encoded we can convert the content into IHtmlString. So another resolution would be like this. Also we can create an extension method as well for better developing experience. 1: using System; 2: using System.Collections.Generic; 3: using System.Linq; 4: using System.Web; 5: using System.Web.Mvc; 6: 7: namespace ShaunXu.Blogs.IHtmlStringIssue 8: { 9: public static class Helpers 10: { 11: public static MvcHtmlString IsHtmlSafe(this string content) 12: { 13: return MvcHtmlString.Create(content); 14: } 15: } 16: } Then the view would be like this. And the page rendered correctly. Summary In this post I explained a bit about the new markup in .NET 4.0 – <%: %> and its usage. I also explained a bit about how to control the page content, whether it should be encoded or not. We can see the ASP.NET MVC gives us more points to control the web pages. Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

Read the article

Delivering the Integrated Portal Experience!

- by Michael Snow

v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Guest post by Richard Maldonado, Principal Product Manager, Oracle WebCenter Portal Organizations are still struggling to standardize on a user interaction platform which can meet the needs of all their target audiences. This has not only resulted in inefficient and inconsistent experiences for their users, but it also creates inefficiencies (productivity and costs) for the departments that manage the applications and information systems. Portals have historically been the unifying platform that provide IT with a common interface which can securely surface the most relevant interactions for a given user and/or group of users. However, organizations have found that the technologies available have either not provided the flexibility necessary to address all of their use cases, or they rely too much on IT resources to manage, maintain, and evolve. Empowering the Business Groups The core issue that IT departments face with delivering portal experiences is having enough resources to respond and address the influx of requirements which come in from the business. Commonly, when a business group wants a new portal site established for their group, they will submit a request to the IT dept, the IT dept then assigns a resource to an administrator and/or developer to build. Unfortunately, this approach is not scalable, it can be a time consuming activity which requires significant interaction between the business owner and the IT resource. A modern user interaction platforms should empower the business groups by providing them tools which they can use to build and manage the portal experiences without the need for IT's involvement. And because business groups rarely have technical resources (developers) on staff, the tools must be easy enough that virtually any business user could use. In addition, the tool must be powerful enough to allow them to build the experience that they need, things such as creating a whole new portal, add/manage page and page hierarchy, manage user/group access, add/modify components within the page, etc. This balance between ease-of-use and flexibility is key to the successful adoption of tools which will ultimately reduce the burden on IT, respond to the needs of the business, and deliver high-value experiences for the users. Ready or Not, Here They Come: Smartphones and Tablets Recently, several studies have highlighted that smartphone and tablet-style devices have overtaken PC's in both sales and usage. This shift is further driving organizations to revaluate how they're delivering data, information, and applications to their users. Users are expecting to get the same level of access and interaction, but in a ways which are optimized for the capabilities of the device that they are using. Expect More With the ever growing number of new IT projects and flat/shrinking budgets, organizations are looking for comprehensive solutions which can deliver integrated web experiences that are tailored for the users and optimized for mobile devices. Piecing together a number of point solutions is no longer an option. A modern portal technology should not only address the traditional needs of integrating and surfacing back-end applications/information, but it should enable the business through easy-to-use tools and accelerate the delivery of mobile optimized experiences. v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} 12.00 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} 12.00 Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} WebCenter in Action Series: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter Featuring Qualcomm & Keste 12.00 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:Calibri; mso-fareast-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} 12.00 Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-fareast- mso-bidi-font-family:"Times New Roman";}

Read the article

JBox2D Polygon Collisions Acting Strange

- by andy

I have been playing around with JBox2D and Slick2D and made a little demo with a ground object, a box object, and two different polygons. The problem I am facing is that the collision-detection for the polygons seems to be off (see picture below), but the box's collision works fine. My Code: Main Class package main; import org.jbox2d.common.Vec2; import org.jbox2d.dynamics.BodyType; import org.jbox2d.dynamics.World; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.SlickException; import org.newdawn.slick.state.BasicGameState; import org.newdawn.slick.state.StateBasedGame; import shapes.Box; import shapes.Polygon; public class State1 extends BasicGameState{ World world; int velocityIterations; int positionIterations; float pixelsPerMeter; int state; Box ground; Box box1; Polygon poly1; Polygon poly2; Renderer renderer; public State1(int state) { this.state = state; } @Override public void init(GameContainer gc, StateBasedGame game) throws SlickException { velocityIterations = 10; positionIterations = 10; pixelsPerMeter = 1f; world = new World(new Vec2(0.f, -9.8f)); renderer = new Renderer(gc, gc.getGraphics(), pixelsPerMeter, world); box1 = new Box(-100f, 200f, 40, 50, BodyType.DYNAMIC, world); ground = new Box(-14, -275, 50, 900, BodyType.STATIC, world); poly1 = new Polygon(50f, 10f, new Vec2[] { new Vec2(-6f, -14f), new Vec2(0f, -20f), new Vec2(6f, -14f), new Vec2(10f, 10f), new Vec2(-10f, 10f) }, BodyType.DYNAMIC, world); poly2 = new Polygon(0f, 10f, new Vec2[] { new Vec2(10f, 0f), new Vec2(20f, 0f), new Vec2(30f, 10f), new Vec2(30f, 20f), new Vec2(20f, 30f), new Vec2(10f, 30f), new Vec2(0f, 20f), new Vec2(0f, 10f) }, BodyType.DYNAMIC, world); } @Override public void update(GameContainer gc, StateBasedGame game, int delta) throws SlickException { world.step((float)delta / 180f, velocityIterations, positionIterations); } @Override public void render(GameContainer gc, StateBasedGame game, Graphics g) throws SlickException { renderer.render(); } @Override public int getID() { return this.state; } } Polygon Class package shapes; import org.jbox2d.collision.shapes.PolygonShape; import org.jbox2d.common.Vec2; import org.jbox2d.dynamics.Body; import org.jbox2d.dynamics.BodyDef; import org.jbox2d.dynamics.BodyType; import org.jbox2d.dynamics.FixtureDef; import org.jbox2d.dynamics.World; import org.newdawn.slick.Color; public class Polygon { public float x, y; public Color color; public BodyType bodyType; org.newdawn.slick.geom.Polygon poly; BodyDef def; PolygonShape ps; FixtureDef fd; Body body; World world; Vec2[] verts; public Polygon(float x, float y, Vec2[] verts, BodyType bodyType, World world) { this.verts = verts; this.x = x; this.y = y; this.bodyType = bodyType; this.world = world; init(); } public void init() { def = new BodyDef(); def.type = bodyType; def.position.set(x, y); ps = new PolygonShape(); ps.set(verts, verts.length); fd = new FixtureDef(); fd.shape = ps; fd.density = 2.0f; fd.friction = 0.7f; fd.restitution = 0.5f; body = world.createBody(def); body.createFixture(fd); } } Rendering Class package main; import org.jbox2d.collision.shapes.PolygonShape; import org.jbox2d.collision.shapes.ShapeType; import org.jbox2d.common.MathUtils; import org.jbox2d.common.Vec2; import org.jbox2d.dynamics.Body; import org.jbox2d.dynamics.Fixture; import org.jbox2d.dynamics.World; import org.newdawn.slick.Color; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.geom.Polygon; import org.newdawn.slick.geom.Transform; public class Renderer { World world; float pixelsPerMeter; GameContainer gc; Graphics g; public Renderer(GameContainer gc, Graphics g, float ppm, World world) { this.world = world; this.pixelsPerMeter = ppm; this.g = g; this.gc = gc; } public void render() { Body current = world.getBodyList(); Vec2 center = current.getLocalCenter(); while(current != null) { Vec2 pos = current.getPosition(); g.pushTransform(); g.translate(pos.x * pixelsPerMeter + (0.5f * gc.getWidth()), -pos.y * pixelsPerMeter + (0.5f * gc.getHeight())); Fixture f = current.getFixtureList(); while(f != null) { ShapeType type = f.getType(); g.setColor(getColor(current)); switch(type) { case POLYGON: { PolygonShape shape = (PolygonShape)f.getShape(); Vec2[] verts = shape.getVertices(); int count = shape.getVertexCount(); Polygon p = new Polygon(); for(int i = 0; i < count; i++) { p.addPoint(verts[i].x, verts[i].y); } p.setCenterX(center.x); p.setCenterY(center.y); p = (Polygon)p.transform(Transform.createRotateTransform(current.getAngle() + MathUtils.PI, center.x, center.y)); p = (Polygon)p.transform(Transform.createScaleTransform(pixelsPerMeter, pixelsPerMeter)); g.draw(p); break; } case CIRCLE: { f.getShape(); } default: } f = f.getNext(); } g.popTransform(); current = current.getNext(); } } public Color getColor(Body b) { Color c = new Color(1f, 1f, 1f); switch(b.m_type) { case DYNAMIC: if(b.isActive()) { c = new Color(255, 123, 0); } else { c = new Color(99, 99, 99); } break; case KINEMATIC: break; case STATIC: c = new Color(111, 111, 111); break; default: break; } return c; } } Any help with fixing the collisions would be greatly appreciated, and if you need any other code snippets I would be happy to provide them.

Read the article

CodePlex Daily Summary for Friday, September 28, 2012

CodePlex Daily Summary for Friday, September 28, 2012Popular ReleasesWPUtils: WPUtils 1.2: Just fixed an issue related to isolated storage path for ChoosePhotoBehavior. Specifically CreateDirectory method only accepts relative path, but was given a "/photos/" path which would result in exception. Please make sure you have this fix if you are using ChoosePhotoBehavior! NOTE: Windows Phone SDK 7.1 or higher is required.TFS Timesheets: TFS Timesheets 2.0: New features: Visual Studio 2012 support Bug fixes: Scaling mode inherited rather than font scalingCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor 1.1 Beta: Visual Ribbon Editor 1.1 Beta What's New: Fixed scrolling issue in UnHide dialog Added support for connecting via ADFS / IFD Added support for more than one action for a button Added support for empty StringParameter for Javascript functions Fixed bug in rule CrmClientTypeRule when selecting Outlook option Extended Prefix field in New Button dialogFree Aspx Image Gallery: Free Aspx Image Gallery Release V1: This is first basic release of my free aspx image gallery project. It is free to use and modify by the user without any need of providing any credit to me.Simple Microsoft Excel Document Converter (Convert To XLS, XLSX, PDF, XPS): ExcelDocConverter 0.1 Beta: Initial Release Microsoft Excel Documents Converter. Microsoft Excel 1997-2003 (XLS) Microsoft Excel 2007/2010 (XLSX) Portable Document Format (PDF) Microsoft XPS Document (XPS) Difference between NET2.0 and NET3.5 This program uses .NET Framework runtime library to run. Basically, they are no differences. Only the runtime library version is different. For older computers, i.e. Windows XP, might not have .NET Framework 3.5 installed, then use NET2.0 in stead. But, some Windows XP SP2 mig...Office File Properties: Office File Properties 3.3.1: Bug fix. Convert file extension to lowercase before checking.LoBDb.NET: LoBDb.NET 1.0.9: Centido.Core library: 1) SQL Server script bug fix: an error when changing the MaxLength property of an indexed string column or when changing the Precision-Scale properties of a decimal column. LobDb.NET Manager: 1) Changing the Precision, Scale, Default Value, Minimum and Maximum properties of a decimal column now enables the Save button. 2) The MaxLength property of a string column and the Precision+Scale values of a decimal column are now displayed in the column list. 3) Changing the Min...Chaos games: Chaos games: Small app for generating fractals using chaos gamesVisual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textMCEBuddy 2.x: MCEBuddy 2.2.16: Changelog for 2.2.16 (32bit and 64bit) Now a standalone remote client also available to control the Engine remotely. 1. Added support for remote connections for status and configuration. MCEBuddy now uses port 23332. The remote server name, remote server port and local server port can be updated from the MCEBuddy.conf file BUT the Service or GUI needs to be restarted (i.e. reboot or restart service or restart program) for it to take effect. Refer to documentation for more details http://mce...ZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.SSIS GoogleAnalyticsSource: Version 1.1 Alpha 2: The component uses now the Google API V2.4 including the management API.MVC Bootstrap: MVC Boostrap 0.5.1: A small demo site, based on the default ASP.NET MVC 3 project template, showing off some of the features of MVC Bootstrap. This release uses Entity Framework 5 for data access and Ninject 3 for dependency injection. If you download and use this project, please give some feedback, good or bad!menu4web: menu4web 1.0 - free javascript menu for web sites: menu4web 1.0 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 21 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Rawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.JSLint for Visual Studio 2010: 1.4.0: VS2012 support is alphaBlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????Player Framework by Microsoft: Player Framework for Windows 8 (Preview 6): IMPORTANT: List of breaking changes from preview 5 Added separate samples download with .vsix dependencies instead of source dependencies Support for FreeWheel SmartXML ad responses Support for Smooth Streaming SDK DownloaderPlugins Support for VMAP and TTML polling for live scenarios Support for custom smooth streaming byte stream and scheme handlers Support for new play time and position tracking plugin Added IsLiveChanged event Added AdaptivePlugin.MaxBitrate property Add...New ProjectsChaos games: Small app to generating fractals using chaos gamesDocument Digitalization System: This system will allow the users with on one or more PCs to digitalize pdf files and store it or export it to other file formats.ExternalTokenAnalysisOffline: SPUser?UserToken????????????????。FinalProjectSeniorProject: ***Unfinished*** Senior project build GL Ponpes Selamat Kendal: Aplikasi Akuntansi Sekolah Pondok Pesantren Modern Selamat KendalHealth Care Manager: One of keynote planned for the Brazzaville Microsoft event coming soon.Orchard Commerce History with PayPal: Project expands on Nwazet.Commerce module (and is required for this module to work). Adds a purchase history, product role associations, and PayPal.PDF.NET: PWMIS ?????? Ver 4.5 ???? SMS Egypt: This project is intended to make it easy for people to send SMS to their customers using SMS gateways inside and outside Egypt. Strong Caml: Use the familiar CAML syntax, but now do it in strongly-typed, dynamic code. Just follow Visual Studio's IntelliSense, and your CAML query can't go wrong!TrainingFrameWork: TrainingFrameWork

Search Results

Search found 30514 results on 1221 pages for '10 04'.

Page 690/1221 | < Previous Page | 686 687 688 689 690 691 692 693 694 695 696 697 | Next Page >

- by Pinal Dave

- by aspiringgeek

- by Francesco Noferi

- by Emin Askerov

- by Phil Royer

- by Yousef_Jadallah

- by Alois Kraus

- by James Michael Hare

- by Ratman21

- by tina nyaa

- by Henry

- by nikolaosk

- by david.butler(at)oracle.com

- by LeonShaner

- by Michael Snow

- by Mike Dietrich

- by Daniel Moth

- by Chris

- by CliveT

- by Shaun

- by Michael Snow

- by andy

< Previous Page | 686 687 688 689 690 691 692 693 694 695 696 697 | Next Page >