Search Results

Search found 18447 results on 738 pages for 'iphone and ipod touch'.

Page 698/738 | < Previous Page | 694 695 696 697 698 699 700 701 702 703 704 705  | Next Page >

• Best support now on windows: Mercurial or Git?

  - by mamcx

  I want to change my current subversion setup to Mercurial or Git. I read about the two and I have a conflicted view about how well they work on windows. Alot of pages say Git is sub-par on windows, slow and badly integrated. And almost everyone say Mercurial is better. But some say Git now is better and Mercurial is behind. I check the screenshots of TortoiseHG and TortoiseGIT and the mercurial one look "worse"... but maybe is just crappy screenshots? I read about the two, prefer the command-line interface of Mercurial, but seriously, I don't pretend to touch the command line. And if one of the two is a real improvenment to SVN, I don't have to do that (In SVN is necesary go to the metal because something need fix). In SVN I have issues when commit or get code made on OSX (I code on Windows, OSX, Solaris. Mainly windows). So I hope don't get that issues again (I mean, failure to commit to the repo). I have a small repository, doing solo.

  Read the article

• After drawing circles on C# form how can i know on what circle i clicked?

  - by SorinA.

  I have to represent graphically an oriented graph like in the image below. i have a C# form, when i click with the mouse on it i have to draw a node. If i click somewhere on the form where is not already a node drawn it means i cliked with the intetion of drawing a node, if it is a node there i must select it and memorize it. On the next mouse click if i touch a place where there is not already a node drawn it means like before that i want to draw a new node, if it is a node where i clicked i need to draw the line from the first memorized node to the selected one and add road cost details. i know how to draw the circles that represent the nodes of the graph when i click on the form. i'm using the following code: namespace RepGraficaAUnuiGraf { public partial class Form1 : Form { Graphics graphDrawingArea; Bitmap bmpDrawingArea; Graphics graph; public Form1() { InitializeComponent(); } private void Form1_Load(object sender, EventArgs e) { bmpDrawingArea = new Bitmap(Width, Height); graphDrawingArea = Graphics.FromImage(bmpDrawingArea); graph = Graphics.FromHwnd(this.Handle); } private void Form1_Click(object sender, EventArgs e) { DrawCentralCircle(((MouseEventArgs)e).X, ((MouseEventArgs)e).Y, 15); graph.DrawImage(bmpDrawingArea, 0, 0); } void DrawCentralCircle(int CenterX, int CenterY, int Radius) { int start = CenterX - Radius; int end = CenterY - Radius; int diam = Radius * 2; bmpDrawingArea = new Bitmap(Width, Height); graphDrawingArea = Graphics.FromImage(bmpDrawingArea); graphDrawingArea.DrawEllipse(new Pen(Color.Blue), start, end, diam, diam); graphDrawingArea.DrawString("1", new Font("Tahoma", 13), Brushes.Black, new PointF(CenterX - 8, CenterY - 10)); } } } My question is how can i find out if at the coordinates (x,y) on my form i drew a node and which one is it? I thought of representing the nodes as buttons, having a tag or something similar as the node number(which in drawing should be 1 for Santa Barbara, 2 for Barstow etc.)

  Read the article

• Adding multiple rss feeds to a script in SCALA InfoChannel Designer 5

  - by godleuf

  Okay, since it is impossible to talk to anyone on the phone or get support through Scala's "forum", I am going to take a shot and see if anyone out there is feeling my pain. I have a client that uses Scala's InfoChannel Designer and Content Manager. I have had to learn this software from scratch and I have to say it hasn't been easy. I think I am at a point where the overall design is set, but I need to implement a couple of things before I can make this happen. RSS feeds are my issue at this point. Multiple RSS feeds to be specific. I need a feed coming in for 3 areas of content: Wiki News (or equivalent), local weather and a stock ticker. I have learned how to setup a "crawl" using a script example available from Scala's file center and copying and pasting into my design. But from what I have learned first hand and through reading through other forums, you can not have a feed from 3 different sources or urls happening simultaneously. Doesn't seem like it would be an issue, but apparently it is. This small step has held up this project for far too long and I need to get it figured out. This doesn't even touch on my issue of feeding in streaming video as a background but I have gone over this in another question but with no luck thus far. If there is ANYONE out there who is in anything similar using this software, your feedback and/or suggestions would be greatly appreciated. Thanks you for allowing me to vent!

  Read the article

• Running an existing LINQ query against a dynamic object (DataTable like)

  - by TomTom

  Hello, I am working on a generic OData provider to go against a custom data provider that we have here. Thsi is fully dynamic in that I query the data provider for the table it knows. I have a basic storage structure in place so far based on the OData sample code. My problem is: OData supports queries and expects me to hand in an IQueryable implementation. On the lowe rside, I dont have any query support. Not a joke - the provider returns tables and the WHERE clause is not supported. Performance is not an issue here - the tables are small. It is ok to sort them in the OData provider. My main problem is this. I submit a SQL statement to get out the data of a table. The result is some sort of ADO.NET data reader here. I need to expose an IQueryable implementation for this data to potentially allow later filtering. Any ide ahow to best touch that? .NET 3.5 only (no 4.0 planned for some time). I was seriously thinking of creating dynamic DTO classes for every table (emitting bytecode) so I can use standard LINQ. Right now I am using a dictionary per entry (not too efficient) but I see no real way to filter / sort based on them.

  Read the article

• How to make gcc on SUN calculate floating points the same way as in Linux

  - by Marina

  I have a project where I have to perform some mathematics calculations with double variables. The problem is that I get different results on SUN Solaris 9 and Linux. There are a lot of ways (explained here and other forums) how to make Linux work as Sun, but not the other way around. I cannot touch the Linux code, so it is only SUN I can change. Is there any way to make SUN to behave as Linux? The code I run(compile with gcc on both systems): int hash_func(char *long_id) { double product, lnum, gold; while (*long_id) lnum = lnum * 10.0 + (*long_id++ - '0'); printf("lnum => %20.20f\n", lnum); lnum = lnum * 10.0E-8; printf("lnum => %20.20f\n", lnum); gold = 0.6125423371582974; product = lnum * gold; printf("product => %20.20f\n", product); ... } if the input is 339886769243483 the output in Linux: lnum => 339886769243**483**.00000000000000000000 lnum => 33988676.9243**4829473495483398** product => 20819503.600158**59827399253845** When on SUN: lnum => 339886769243483.00000000000000000000 lnum => 33988676.92434830218553543091 product = 20819503.600158**60199928283691** Note: The result is not always different, moreover most of the times it is the same. Just 10 15-digit numbers out of 60000 have this problem. Please help!!!

  Read the article

• Rails: Multi-Step New User Signup Form (FSM?)

  - by neezer

  I've read the "Create Multi-Step Wizard" in Advanced Rails Recipes. I've also read and re-read the documentation for the updated FSM I'm using called Workflow, and looked here and here. The Advanced Rails Recipe focuses on records (quizzes) that already exist, and doesn't cover creating new ones. The Workflow docs don't cover any code for controllers or views, so I've no idea what to do with all this model magic, and the last two links barely touch on implementation either. From the aforementioned resources, I have a good understanding of what a FSM in Rails is and how to play with it in the console or IRB, but I've got very little direction or understanding how to implement one into my Rails app. What I would like is this: a simple, multi-step user signup process. Step 1: User enters in their critical details (with validations). Step 2: User enters in their search criteria, for their profile (with validations). Step 3: User agrees to the Terms of Service (with validations). Step 4: User is greeted by a confirmation page, including a link that takes them to their newly created account. I'd also like full navigation between the steps and full capture (saves to the database) with each transition. Can someone please give me a clear implementation of something similar to this? I would LOVE an example app that includes a multi-step signup process where I can look at the code (FULL source code--models AND controllers and views) under the hood, but I've been unable to find anything like that. Any guidance would be appreciated! EDIT: Please help make this a Railscast! Ryan B. (a.k.a. Superman), if you're reading this, we need you! http://feedback.railscasts.com/forums/77-episode-suggestions/suggestions/35553-multi-step-forms-and-wizards

  Read the article

• Open a new browser window from embeded Internet Explorer

  - by Buddy

  I am working on a Windows desktop app (C++) that has an embedded Internet Explorer page. I'm working on the html page that is displayed in the There is not a back button control, so one of the requests is that links clicked on in the page should open the link in a browser window. It can open the link in the users default browser or in IE. Is this possible? I realize that this is not possible because javascript is in a sandbox and cannot touch outside applications. I'm thinking there might be a way because it is using the IE. I have tried the two methods that have worked for me in the past. Using jquery, I've tried these two approaches, but neither work in the app. They both work fine in normal browsers. Using target="_blank" $( "a" ).attr( "target", "_blank" ); The other is using window.open: $( "a" ).click( function() { window.open( $( this ).attr( "href" ) ); } ); I'm afraid that writing windows desktop applications is outside my area of expertise, so I cannot give more information regarding that side of the issue.

  Read the article

• Are MEF's ComposableParts contracts instance-based?

  - by Dave

  I didn't really know how to phrase the title of my questions, so my apologies in advance. I read through parts of the MEF documentation to try to find the answer to my question, but couldn't find it. I'm using ImportMany to allow MEF to create multiple instances of a specific plugin. That plugin Imports several parts, and within calls to a specific instance, it wants these Imports to be singletons. However, what I don't want is for all instances of this plugin to use the same singleton. For example, let's say my application ImportManys Blender appliances. Every time I ask for one, I want a different Blender. However, each Blender Imports a ControlPanel. I want each Blender to have its own ControlPanel. To make things a little more interesting, each Blender can load BlendPrograms, which are also contained within their own assemblies, and MEF takes care of this loading. A BlendProgram might need to access the ControlPanel to get the speed, but I want to ensure that it is accessing the correct ControlPanel (i.e. the one that is associated with the Blender that is associated with the program!) This diagram might clear things up a little bit: As the note shows, I believe that the confusion could come from an inherently-poor design. The BlendProgram shouldn't touch the ControlPanel directly, and instead perhaps the BlendProgram should get the speed via the Blender, which will then delegate the request to its ControlPanel. If this is the case, then I assume the BlendProgram needs to have a reference to a specific Blender. In order to do this, is the right way to leverage MEF and use an ImportingConstructor for BlendProgram, i.e. [ImportingConstructor] public class BlendProgram : IBlendProgram { public BlendProgram( Blender blender) {} } And if this is the case, how do I know that MEF will use the intended Blender plugin?

  Read the article

• How to rename goals in Maven?

  - by mjs

  In the Maven document Introduction to the Build Lifecycle, a goal of display:time is described that outputs the current time. The plugin is as follows: ... <plugin> <groupId>com.mycompany.example</groupId> <artifactId>maven-touch-plugin</artifactId> <version>1.0</version> <executions> <execution> <phase>process-test-resources</phase> <goals> <goal>timestamp</goal> </goals> </execution> </executions> </plugin> ... I have several questions relating to this plugin: How can I change the name of the goal to, for example, foo:bar? (Why does neither display nor time appear anywhere in the XML fragment? How can you tell, from looking at the fragment, what goals it defines?) How can I manually run this goal? (For similar constructs, the equivalent of mvn display:time sometimes works, but this doesn't work consistently.) How can I see if this goal exists? (i.e. list available goals; this question suggests this is impossible.)

  Read the article

• PostgreSQL, Foreign Keys, Insert speed & Django

  - by Miles

  A few days ago, I ran into an unexpected performance problem with a pretty standard Django setup. For an upcoming feature, we have to regenerate a table hourly, containing about 100k rows of data, 9M on the disk, 10M indexes according to pgAdmin. The problem is that inserting them by whatever method literally takes ages, up to 3 minutes of 100% disk busy time. That's not something you want on a production site. It doesn't matter if the inserts were in a transaction, issued via plain insert, multi-row insert, COPY FROM or even INSERT INTO t1 SELECT * FROM t2. After noticing this isn't Django's fault, I followed a trial and error route, and hey, the problem disappeared after dropping all foreign keys! Instead of 3 minutes, the INSERT INTO SELECT FROM took less than a second to execute, which isn't too surprising for a table <= 20M on the disk. What is weird is that PostgreSQL manages to slow down inserts by 180x just by using 3 foreign keys. Oh, disk activity was pure writing, as everything is cached in RAM; only writes go to the disks. It looks like PostgreSQL is working very hard to touch every row in the referred tables, as 3MB/sec * 180s is way more data than the 20MB this new table takes on disk. No WAL for the 180s case, I was testing in psql directly, in Django, add ~50% overhead for WAL logging. Tried @commit_on_success, same slowness, I had even implemented multi row insert and COPY FROM with psycopg2. That's another weird thing, how can 10M worth of inserts generate 10x 16M log segments? Table layout: id serial primary, a bunch of int32, 3 foreign keys to small table, 198 rows, 16k on disk large table, 1.2M rows, 59 data + 89 index MB on disk large table, 2.2M rows, 198 + 210MB So, am I doomed to either drop the foreign keys manually or use the table in a very un-Django way by defining saving bla_id x3 and skip using models.ForeignKey? I'd love to hear about some magical antidote / pg setting to fix this.

  Read the article

• How to move a symlink to the trash?

  - by neoneye

  I don't see any options for the FSPathMoveObjectToTrashSync() function for not following links. Here is what I have tried Create a link and a file [ 21:32:41 /tmp ] $ touch my_file [ 21:32:45 /tmp ] $ ln -s my_file my_link [ 21:32:52 /tmp ] $ la total 8 drwxrwxrwt 12 root wheel 408 17 Maj 21:32 . drwxr-xr-x@ 6 root wheel 204 9 Sep 2009 .. -rw-r--r-- 1 neoneye wheel 0 17 Maj 21:32 my_file lrwxr-xr-x 1 neoneye wheel 7 17 Maj 21:32 my_link -> my_file Move the link to the trash OSStatus status = FSPathMoveObjectToTrashSync( "/tmp/my_link", NULL, kFSFileOperationDefaultOptions ); NSLog(@"status: %i", (int)status); Output is status: 0 However the file got removed and not the link [ 21:32:55 /tmp ] $ la total 8 drwxrwxrwt 11 root wheel 374 17 Maj 21:33 . drwxr-xr-x@ 6 root wheel 204 9 Sep 2009 .. lrwxr-xr-x 1 neoneye wheel 7 17 Maj 21:32 my_link -> my_file [ 21:33:05 /tmp ] $ How can I move move symlinks to the trash? The Solution.. thanks to Rob Napier NSString* path = @"/tmp/my_link"; OSStatus status = 0; FSRef ref; status = FSPathMakeRefWithOptions( (const UInt8 *)[path fileSystemRepresentation], kFSPathMakeRefDoNotFollowLeafSymlink, &ref, NULL ); NSAssert((status == 0), @"failed to make FSRef"); status = FSMoveObjectToTrashSync( &ref, NULL, kFSFileOperationDefaultOptions ); NSLog(@"status: %i", (int)status);

  Read the article

• Getting force close when i add view to other view when a thread is running

  - by Praveena

  Hi, I am getting the below error 12-30 05:40:40.484: ERROR/AndroidRuntime(413): Uncaught handler: thread Thread-10 exiting due to uncaught exception 12-30 05:40:40.494: ERROR/AndroidRuntime(413): android.view.ViewRoot$CalledFromWrongThreadException: Only the original thread that created a view hierarchy can touch its views. 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.ViewRoot.checkThread(ViewRoot.java:2629) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.ViewRoot.requestLayout(ViewRoot.java:545) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.View.requestLayout(View.java:7657) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.View.requestLayout(View.java:7657) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.View.requestLayout(View.java:7657) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.View.requestLayout(View.java:7657) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.View.requestLayout(View.java:7657) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.ViewGroup.addView(ViewGroup.java:1749) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.ViewGroup.addView(ViewGroup.java:1708) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at android.view.ViewGroup.addView(ViewGroup.java:1688) 12-30 05:40:40.494: ERROR/AndroidRuntime(413): at com.wwwww.shout.presentationLayer.Shout$1.run(Shout.java:137) and my code is myProgressDialog = ProgressDialog.show(Shout.this,"","Loading...",true); new Thread() { public void run() { String xml; xml="<spGetUserMessages><SearchLocation></SearchLocation></spGetUserMessages>"; messages =parse.GetGetUserMessages(dataparsing.ILGetUserMessages(xml)); myProgressDialog.dismiss(); ((LinearLayout)findViewById(R.id.LinearlayoutMessage)).addView(iiii); } }.start(); at the time of adding views to the layout i am getting the above error.what is the wrong in this.Please give me some suggestions.Thanks in advance

  Read the article

• Are finalizers ever allowed to call other managed classes' methods?

  - by romkyns

  I used to be pretty sure the answer is "no", as explained in Overriding the Finalize method and Object.Finalize documentation. However, while randomly browsing through FileStream in Reflector, I found that it can actually call just such a method from a finalizer: private SafeFileHandle _handle; ~FileStream() { if (this._handle != null) { this.Dispose(false); } } protected override void Dispose(bool disposing) { try { ... } finally { if ((this._handle != null) && !this._handle.IsClosed) // <=== HERE { this._handle.Dispose(); // <=== AND HERE } [...] } } I started wondering whether this will always work due to the exact way in which it's written, and hence whether the "do not touch managed classes from finalizers" is just a guideline that can be broken given a good reason and the necessary knowledge to do it right. I dug a bit deeper and found out that the worst that can happen when the "rule" is broken is that the managed object being accessed had already been finalized, or may be getting finalized in parallel on a separate thread. So if the SafeFileHandle's finalizer didn't do anything that would cause a subsequent call to Dispose fail then the above should be fine... right? Question: so there might after all be situations in which a method on another managed class may be called reliably from a finalizer? I've always believed this to be false, but this code suggests that it's possible and that there can be good enough reasons to do it. Bonus: Observe that the SafeFileHandle will not even know it's being called from a finalizer, since this is just a normal call to Dispose(). The base class, SafeHandle, actually has two private methods, InternalDispose and InternalFinalize, and in this case InternalDispose will be called. Isn't this a problem? Why not?...

  Read the article

• Unexpected $end in PHP file

  - by mattbd

  I'm working on a PHP contact form, but I can't get it to work. I get the following error in the Apache server log, running on an Ubuntu Server VM: PHP Parse error: syntax error, unexpected $end in /home/matthew/Sites/contactFormResponse.php on line 75, referer: http://192.168.1.4/contactForm.php From googling this error, it sounds like it's normally caused by either using the short PHP tag when the server's not set up to recognise them, or by having a block of code that isn't closed correctly. But as far as I can see that isn't the case here - as far as I can see it's all closed correctly. Here's the PHP code: <?php error_reporting(E_ALL); // Define variables to hold the name, email address and message, and import the information into the variables $name = $_POST['NameInput']; $email = $_POST['EmailAddress']; $telno = $_POST['ContactNumber']; $querytype = $_POST['QueryType']; $bookingstartdate = $_POST['BookingStartDay'] . $_POST['BookingStartMonth'] . $_POST['BookingStartYear']; $bookingenddate = $_POST['BookingEndDay'] . $_POST['BookingEndMonth'] . $_POST['BookingEndYear']; $message = $_POST['QueryText']; // Validate the inputs - send it if it's OK if(3 < strlen($name) && 3 < strlen($email)) { $email_message = <<< EMAIL Message from contact form at holidaychalet.co.uk Name: $name Email: $email Contact Number: $telno Query Type: $querytype Booking Start Date: $bookingstartdate Booking End Date: $bookingenddate The message: $message EMAIL; $headers = "cc:[email protected]\r\n"; if(mail('matthew@localhost','Contact form email', $email_message, $headers)) { echo "Thanks for completing the form! I'll be in touch shortly!"; } else { echo "Something went wrong - please use the back button and try again"; } } else { echo "You didn't complete the form fully enough! Please use go back using your web browser's back button"; } ?>

  Read the article

• jQuery e.target bubbling best practice ?

  - by olouv

  In my heavy-ajax code, i always bind "click" the body tag & act depending on $(e.target) & using $.fn.hasClass(). However when i click on an anchor that has a </span> tag inside, my $(e.target) equals this node, and not the parent anchor as i would like it to. From now on, i have used this trick (var $t = $(e.target);) : /** bubbling **/ if($t.get(0).tagName !== "A" && $t.get(0).tagName !== "AREA") { $t = $t.parent("a"); if(empty($t)) return true; //else console.log("$t.bubble()", $t); } It feels wrong somehow... Do you have any better implementation ? $.fn.live() does not solve my issue as it still returns the span as the target. Moreover i'm looking for speed (running on atom-based touch devices) & live appeared to be way slower (twice) : http://jsperf.com/bind-vs-click/3 In fact, as @Guffa pointed, using $.fn.live() solves the span bubbling issue as i don't need the event.target anymore. I guess there is no other "right" answer here (using bind).

  Read the article

• ORA- 01157 / Cant connect to database

  - by Tom

  Hi everyone, this is a follow up from this question. Let me start by saying that i am NOT a DBA, so i'm really really lost with this. A few weeks ago, we lost contact with one of our SID'S. All the other services are working, but this one in particular is not. What we got was this message when trying to connect ORA-01033: ORACLE initialization or shutdown in progress An attempt to alter database open ended up in ORA-01157: cannot identify/lock data file 6 - see DBWR trace file ORA-01110: data file 6: '/u01/app/oracle/oradata/xxx/xxx_data.dbf' I tried to shutdown / restart the database, but got this message. Total System Global Area 566231040 bytes Fixed Size 1220604 bytes Variable Size 117440516 bytes Database Buffers 444596224 bytes Redo Buffers 2973696 bytes Database mounted. ORA-01157: cannot identify/lock data file 6 - see DBWR trace file ORA-01110: data file 6: '/u01/app/oracle/oradata/xxx/xxx_data.dbf' When all continued the same, I erased the dbf files (rm xxx_data.dbf xxx_index.dbf), and recreated them using touch xxx_data.dbf. I also tried to recreate the tablespaces using `CREATE TABLESPACE DATA DATAFILE XXX_DATA.DBF` and got Database not open As I said, i don't know how bad this is, or how far i'm from gaining access to my database (well, to this SID at least, the others are working). I would imagine that a last resource would be to throw everything away, and recreating it, but I don't know how to, and I was hoping there's a less destructive solution. Any help will be greatly appreciated . Thanks in advance.

  Read the article

• An Ideal Keyboard Layout for Programming

  - by Jon Purdy

  I often hear complaints that programming languages that make heavy use of symbols for brevity, most notably C and C++ (I'm not going to touch APL), are difficult to type because they require frequent use of the shift key. A year or two ago, I got tired of it myself, downloaded Microsoft's Keyboard Layout Creator, made a few changes to my layout, and have not once looked back. The speed difference is astounding; with these few simple changes I am able to type C++ code around 30% faster, depending of course on how hairy it is; best of all, my typing speed in ordinary running text is not compromised. My questions are these: what alternate keyboard layouts have existed for programming, which have gained popularity, are any of them still in modern use, do you personally use any altered layout, and how can my layout be further optimised? I made the following changes to a standard QWERTY layout. (I don't use Dvorak, but there is a programmer Dvorak layout worth mentioning.) Swap numbers with symbols in the top row, because long or repeated literal numbers are typically replaced with named constants; Swap backquote with tilde, because backquotes are rare in many languages but destructors are common in C++; Swap minus with underscore, because underscores are common in identifiers; Swap curly braces with square brackets, because blocks are more common than subscripts; and Swap double quote with single quote, because strings are more common than character literals. I suspect this last is probably going to be the most controversial, as it interferes the most with running text by requiring use of shift to type common contractions. This layout has significantly increased my typing speed in C++, C, Java, and Perl, and somewhat increased it in LISP and Python.

  Read the article

• AJAX contact form in CodeIgniter

  - by Ross

  Few questions: I'm using CI and JQuery AJAX. In my code below, I assemble dataString, which by default, is appended to the URL as a query string. I've changed the AJAX "type" to POST, so my question is - how do I access dataString in my CI app? It would seem I still have to use $name=$this->input->post('name') Which to me, makes setting dataString redundant? -- I've tried searching but can't really find anything concrete. Would it be possible to still make use of CIs validation library and AJAX? if($this->form_validation->run() == FALSE) { // what can i return so that my CI app shows errors? } Normally you would reload the contact form or redirect the user. In an ideal world I would like the error messages to be shown to the user. Jquery: $(document).ready(function($){ $("#submit_btn").click(function(){ var name = $("input#name").val(); var company = $("input#company").val(); var email = $("input#email").val(); var phone = $("input#phone").val(); var message = $("textarea#message").val(); var dataString = 'name=' + name + '&message=' + message + '&return_email=' + email + '&return_phone=' + phone + '&company=' + company; var response = $.ajax({ type: "POST", url: "newsite/contact_ajax/", data: dataString }).responseText; //$('#contact').hide(); //$('#contact').html('<h5>Form submitted! Thank you!</h5><h4>We will be in touch with you soon.</h4>'); //$('#contact').fadeIn('slow'); return false; }); }); hope i've been clear enough - if anyone has a decent example of a CI contact form that would be great. there's mixed stuff on the internet but nothing that hits all the boxes. thanks

  Read the article

• Scrollbars in ScrollView not showing after custom child view changes size

  - by Ted Hopp

  I have a ScrollView containing a client that is a vertical LinearLayout. The client, in turn, contains custom views that change height dynamically as a background thread does some work. The problem I'm having is that the ScrollView's vertical scroll bar is not updating correctly in Android 1.5. The most common problem occurs when the initial total height of the client is less than the viewport and grows. Initially there is no scroll bar, and it does not show up when the client grows until I actually scroll the window with a touch gesture or other UI action. After that, the scroll bar shows up. However, the thumb does not update as the height continues to change from the background thread. If I scroll the view again through the UI, the thumb immediately corrects itself. My code for updating the height from the background thread is: post(mLayoutRequestor); postInvalidate(); (mLayoutRequestor is a Runnable that just calls requestLayout().) This is done after I've recorded the new height in a variable mHeight. My onMeasure() method calls setMeasuredDimension with a height computed like this: private int measureHeight(int measureSpec) { int result; int specMode = MeasureSpec.getMode(measureSpec); int specSize = MeasureSpec.getSize(measureSpec); if (specMode == MeasureSpec.EXACTLY) { result = specSize; } else { result = mHeight; if (specMode == MeasureSpec.AT_MOST && result > specSize) result = specSize; } return result; } Am I supposed to be calling something else besides requestLayout() to get the scroll bar to update correctly?

  Read the article

• Div on top of Div using z-index.

  - by Iacks

  I have the following divs in my HTML: <div class="main"> <div class="bgimage"></div> <div class="content">Text</div> which is directly inside my body. With the following CSS: .content{filter:alpha(opacity=50);-moz-opacity: 0.5;opacity: 0.5;} .content{position:relative;z-index:1;border:#000 thin solid;width:960px;margin-left:auto;margin-right:auto;background-color:#000;} .bgimage{position:absolute;z-index:-1;width:1024px;height:768px;margin-left:auto;margin-right:auto;background-image:url(bg1.jpg);} Basically, I have a Div that with a display of a background image, and I will have another Div on top of this with transparency. This current code works, but my problem is when I am trying to take the content div down from the top. When I add margin-top:100px, for example, is also brings the image down. I thought it would not touch it if it is not on the same z-index? Why does adding a margin also force the bgimage div down? I have also tried making the div with class of content a position of absolute and a zindex, but then this won't centre. How should I solve this?

  Read the article

• Creating a cocoa Application without nib files/fully pragmatic

  - by Moddy

  Yes, I know this goes against the whole MVC principle! However, I'm just trying to whip up a pretty trivial application - and I've pretty much implemented it pragmatically. However, I have a problem... I create an Empty Project, copy all the frameworks over and set the build settings - and I get errors about the executable.. or lack of executable. The build settings all appear fine, but it tells me there is no executable - it will build + run fine.. however it doesn't run. There is no error either - it just appears to run very fast and cleanly! Unless I try and run gdb which politely tells me I need to give it a file first.. Running… No executable file specified. Use the "file" or "exec-file" command. So I created a Cocoa Application, removed all the stuff I didn't need (i.e the MainMenu.xib file..) and now I can compile my code perfectly.. however it dies with complaining that its "Unable to load nib file: MainMenu, exiting" I have gone through the Project Symbols and see that the code actually relies upon the nib file heavily, even if you don't touch it code-wise. (MVC again I guess..) So my question is - is there a simple way to compile just what you code, no added nib files, just the code you write and the frameworks you add? I assume it would be a blank project but my experience tells me otherwise?!

  Read the article

• In Javascript, is it true that function aliasing works as long as the function being aliased doesn't

  - by Jian Lin

  In Javascript, if we are aliasing a function, such as in: f = g; f = obj.display; obj.f = foo; all the 3 lines above, they will work as long as the function / method on the right hand side doesn't touch this? Since we are passing in all the arguments, the only way it can mess up is when the function / method on the right uses this? Actually, line 1 is probably ok if g is also a property of window? If g is referencing obj.display, then the same problem is there. In line 2, when obj.display touches this, it is to mean the obj, but when f() is invoked, the this is window, so they are different. In line 3, it is the same: when f() is invoked inside of obj's code, then the this is obj, while foo might be using this to refer to window if it were a property of window. (global function). So line 2 can be written as f = function() { obj.display.apply(obj, arguments) } and line 3: obj.f = function() { foo.apply(window, arguments) } Is this the correct method, and are there there other methods besides this?

  Read the article

• Created files on Archos 5 invisible on Windows Xp

  - by user352042

  I am fairly new to Android and this is my first post so I apologise in advance if I am breaking protocol or posting to the wrong board. Please feel free to move this post to somewhere more appropriate if required. I am developing for the 160 Gb Archos 5 Internet tablet. Not ideal as a development platform I know, but customer requirements mean we have no choice. It is running Android 1.6. I have updated the device firmware to the most recent available. Updating the version of Android is not an option at this point. Part of my app's requirement is to write information out to .txt files on the external storage directory so that these can be copied over the USB connection to a Windows XP PC using the Mobile media device (MTP) mode. I have followed all instructions I have come across carefully, eg I check that the storage is available using the technique described at http://developer.android.com/guide/topics/data/data-storage.html#filesExternal. However, althoug the files are created succesfully on the device (I can browse them and open them using the device's File Explorer - they are fine), when I connect the device to a Windows XP computer none of the directories or files I created appear and the size of their parent files suggest they do not exist. I have tried running over the ADB, checked logcat, tried a (signed) release version and even written a second test application which just creates a folder (this behaves the same, ie it creates the folder but this is not visible in Windows Explorer) - nothing anywhere gives me any suggestion as to what the problem might be. If anyone has heard of this before or has any ideas as to what else | could try to fix it please get in touch! We do not have any other devices to test on at the moment, although I hope to remedy this soon, customer permitting.

  Read the article

• Anchor tags are blank

  - by ryanday

  I'm having a problem where the my anchor tags sometimes aren't displaying their links. This is happening on Mobile Safari on multiple iPhones, and in the iPhone simulator. I'm using jQtouch r147, PhoneGap, and jQuery 1.4.2. I'm generating the data from a database call, and adding anchor tags to a list like this: for(var i=0;i<data.rows.length;i++) { var item = $('<li></li>'); var name = data.rows.item(i).name; var anchor = $('<a href="#lpage">'+name+'</a>'); item.addClass('arrow'); // This line always displays the name, even when I can't see // the name in the browser debug.log('The name: ' + name); (function(info) { anchor.bind('tap', function(e) { debug.log('Touch start ' + info.id); }); })(data.rows.item(i)); item.append(anchor); if( anchor.html() == null ) { debug.log('html is blank'); } $('#myUL').append(item); } Sometimes my list of names shows fine(http://imagebin.org/101462), and sometimes it is just blank(http://imagebin.org/101464). When the list is blank, I see the debug.log() line show me 'html is blank', and I also see the log line show me that the variable 'name' does, in fact, contain a valid name. When I check for anchor.html() == null, I've also tried to .remove() the anchor tag, and re-create it. But it always comes back without the name displayed. This happens on the mobile device and in the simulator, but I've never seen it happen in Safari or in Chrome. Has anyone seen something like this? I can't find the cause, and I can't get it to stop. Thank you for any ideas or suggestions!

  Read the article

• Javascript and rendering pauses and stays paused on scroll in the android browser

  - by user357303

  Hi. I've found some wierd behaviour related to scrolling and rendering and javascript. How to make it happen: On any webpage that is long enough to scroll on. Start to scroll pretty fast (fling the page). then release the touch. No while the page is still scrolling because of the momentum. Tap the screen to stop the scroll. This make the browser enter a wierd mode. On the nexus one it behaves like this: The updating of what's shown on the screen stops, you can still click on links and the go to where they are supposed to but what's shown on the screen stays the same. If you then scroll the screen a bit the update of the screen kicks in again and what you you where suppsed to see all the time is shown. On all phones with HTC Sense I've tried (Hero, Desire, Legend) this happens: The updating of the screen is stopped just like on the nexus one, but also the execution of any javascript is stopped. If you click on a link that takes you to another page however things return to normal again. The way I tested this was I created a page like this: http://pastebin.ca/1881620 The changeColor function simply changed the background color of 'container' to a few different colors. So before the error what happens is that when you click any link the color changes. after the error this happens: Nexus one: when you click on the links nothing happens (except the "orange link selected rounded corner box thing" is shown as if the link is clicked). Then when you scroll abit. You can see the color has changed (and equal amount of times to the number of times I clicked the link). On Sense: The links take me to google.com Has anyone else noticed this problem? Is there anyway to work around it? Thanks.

  Read the article

< Previous Page | 694 695 696 697 698 699 700 701 702 703 704 705  | Next Page >