Search Results

Search found 11363 results on 455 pages for 'elastic ip'.

Page 7/455 | < Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >

• Windows Server: specifying the default IP address when NIC has multiple addresses

  - by Cédric Boivin

  I have a Windows Server which has ~10 IP addresses statically bound. The problem is I don't know how to specify the default IP address. Sometimes when I assign a new address to the NIC, the default IP address changes with the last IP entered in the advanced IP configuration on the NIC. This has the effect (since I use NAT) that the outgoing public IP changes too. Even though this problem is currently on Windows Server 2008, I've had the same problem with a Windows Server 2003. How can you set the default IP address on a NIC when it has multiple IP addresses bound? I remark something. When i check route print i see is it there the problem ? 0.0.0.0 0.0.0.0 192.168.x.x 192.168.99.49 261 if i want the default ip be example : 192.168.99.100 There is my route. Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.99.1 192.168.99.49 261 10.10.10.0 255.255.255.0 On-link 10.10.10.10 261 10.10.10.10 255.255.255.255 On-link 10.10.10.10 261 10.10.10.255 255.255.255.255 On-link 10.10.10.10 261 192.168.99.0 255.255.255.0 On-link 192.168.99.49 261 192.168.99.49 255.255.255.255 On-link 192.168.99.49 261 192.168.99.51 255.255.255.255 On-link 192.168.99.49 261 192.168.99.52 255.255.255.255 On-link 192.168.99.49 261 192.168.99.53 255.255.255.255 On-link 192.168.99.49 261 192.168.99.54 255.255.255.255 On-link 192.168.99.49 261 192.168.99.55 255.255.255.255 On-link 192.168.99.49 261 192.168.99.56 255.255.255.255 On-link 192.168.99.49 261 192.168.99.57 255.255.255.255 On-link 192.168.99.49 261 192.168.99.58 255.255.255.255 On-link 192.168.99.49 261 192.168.99.59 255.255.255.255 On-link 192.168.99.49 261 192.168.99.60 255.255.255.255 On-link 192.168.99.49 261 192.168.99.61 255.255.255.255 On-link 192.168.99.49 261 192.168.99.62 255.255.255.255 On-link 192.168.99.49 261 192.168.99.64 255.255.255.255 On-link 192.168.99.49 261 192.168.99.65 255.255.255.255 On-link 192.168.99.49 261 192.168.99.66 255.255.255.255 On-link 192.168.99.49 261 192.168.99.67 255.255.255.255 On-link 192.168.99.49 261 192.168.99.68 255.255.255.255 On-link 192.168.99.49 261 192.168.99.70 255.255.255.255 On-link 192.168.99.49 261 192.168.99.71 255.255.255.255 On-link 192.168.99.49 261 192.168.99.100 255.255.255.255 On-link 192.168.99.49 261 192.168.99.108 255.255.255.255 On-link 192.168.99.49 261 192.168.99.109 255.255.255.255 On-link 192.168.99.49 261 192.168.99.112 255.255.255.255 On-link 192.168.99.49 261 192.168.99.255 255.255.255.255 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 10.10.10.10 261 255.255.255.255 255.255.255.255 On-link 192.168.99.49 261 255.255.255.255 255.255.255.255 On-link 10.10.10.10 261 I need to be certain, when i go on internet i go with the 192.168.99.100 how i do that ?

  Read the article

• How can I set up multiple dynamic users to update a single network's dynamic IP

  - by d3vid

  On my home network we are allocated a dynamic IP. I want to configure ddclient (or an equivalent) to send IP updates to DNS-O-Matic/OpenDNS only when I am on my home network. I do not want to send IP updates when I'm on my office network. Can this be done? I am prepared to use different FLOSS software or a different free DNS service. Additionally, there are multiple users who may be on the home network or away on other networks. How can we configure ddclient on each machine so that whoever is on the home network updates the IP (i.e. so we don't have to rely on a particular machine being on the network to update the IP). OpenDNS support have said we can't simply install updater software on each machine.

  Read the article

• Public IP Routing over Private GRE tunnel

  - by Paul

  I have a GRE tunnel configured between two linux boxes. The tunnel works fine. I can ping from each host the other private ip. Head privateip: 10.0.0.1 publicip: 8.8.8.8 Tail privateip: 10.0.0.2 publicip: 7.7.7.7 The public IP on Tail has the network block 9.9.9.0/23 statically routed over the 7.7.7.7 interface. The idea is to make the 9.9.9.0/23 ips work on servers on the 8.8.8.8 network. I configure the tail host to route the /23 block. I mounted a 9.9 IP on the head server. I can ping the 9.9 ip from the tail to the head. I can't ping the 9.9 ip from the public internet. I think I need to add some other routes because of gateway issues, but I can't seem to wrap my mind around it (not a router guy, just beating my way through something that I have never done before and vaguely understand) --danks

  Read the article

• Is it possible to rent an IP address to mask the server real IP address?

  - by net-girl

  A customer would like to lease an IP address and point it to a dedicated web server with the intention of "masking" the server's IP address so it would be difficult to tell where the site is hosted. I found a company that leases IP addresses here: http://www.webhostingtalk.com/showthread.php?t=1191688 Is this even possible? Can they rent an IP address from a 3rd party in order to hide the server's IP address? Update: My client will be hosting a government leaks site and is trying to become Raid-Proof similar to what the pirate bay did: http://torrentfreak.com/pirate-bay-moves-to-the-cloud-becomes-raid-proof-121017/ Only that I'm worried about using a reverse proxy because of the latency it could cause having the app servers hosted in one data center and the load balancer/reverse proxy in other and also having to pay twice for bandwidth.

  Read the article

• Using QoS to prioritize IP addresses

  - by Tristan

  I have a Western Digital N900 router. I was hoping I'd be able to throttle users based on their MAC address with it, which isn't possible sadly. Seems simple in principle though, duh. The battle against bandwidth hogging roomates rages on. Could I just set the local IP range to their IP, and then set the Local port range to every single port in existence. Then prioritize their IP to lower than mine? Will this work? What are all the ports? And what's the difference between Local and Remote IPs or Ports? Name: Roomate, Priority: Low, Protocol: TCP or UDP ??, Local IP Range: .101 to .101, Local Port Range: 0 to infinity, Remote IP Range: ? to ?, Remote Port Range: ? to ?

  Read the article

• an unknown ip on network

  - by Ahmed safan

  In our office we have many PCs, all of them have static IP addresses. We had a problem with one server with ip 192.168.1.10 dropping off the network occasionally. I unplugged the network cable from the server and from pinged 192.168.1.10 from another host and there was a response. I searched all PCs to see if any has such ip but i didn't found a one. I changed the server ip to fix the problem, but I still find this rogue device using 192.168.1.10 on the network -- how can I figure out what it is? Could it be the ip of virtual machine on someone's PC?

  Read the article

• Why my public ip address is different when I visit different website? [closed]

  - by Mett Li

  After I connect to web via pppoe, I visit different website's phpinfo() page, but the result of _SERVER["REMOTE_PORT"] is different. Including some ip address lookup site like www.whatismyip.com, www.apnic.net etc. and gmail's ip location lookup list are all different. Why? Is these different ip address allocated by ISP on different web resources ? Maybe the reason is CDN by my ISP or the website? If the reason is the ip address allocated by ISP on different web resources, the website visitor's ip address may unreal.

  Read the article

• Plesk 10 Postfix with multiple IP adresses and SSL certificates

  - by JulianB

  We are currently running a root server with Debian 6 and Plesk 10.4.4. We have some virtual hosts using one IP adress (shared) - e.g. example1.com - and another virtual host using a dedicated IP address (example2.com). Is there a way to configure postfix to do the following Always use the IP address of the virtual host to which the e-mail account belongs (so that an e-mail from [email protected] will originate from the shared IP-Address and an e-mail from [email protected] will originate from the dedicated IP? Use different certificates for TLS for example1.com and example2.com? If the latter is not possible: Could any problems arrive when using example1.com as certificate for example2.com users? Of course, example2.com users would have to configure their clients to use example1.com as the SMTP server name to avoid annoying security warnings. But if we still would be able to get the effect of the first point that would still be acceptable.

  Read the article

• Free IP address management software

  - by TiFFolk

  We are choosing a system for managing our IP address space. So we are looking for a special free software like IPPlan. So what we have nowadays: Ipplan (Does not support IPv6) SolarWinds IP address tracker (IPv6 support unknown ) IP module of The NOC Project (BTW, take a look of it, seems to be very promising project) (IPv6 support unknown ) phpIP (Does not support IPv6) IP management from RackTables (Does not support IPv6) Do you know about any other special software, like written above? But: No Wiki No DNS No DHCP No spreadsheet Software should provide: Clear view of available addresses Detail listing of all addresses by subnets/search pattern/owners/additional info It must support adding additional info like owner of IP, domain-name, contacts, etc Multi user support Easy interface Software has to be specially written for address management. Scalability Any OS: win, lin, sol, web

  Read the article

• Free IP address management software

  - by TiFFolk

  We are choosing a system for managing our IP address space. So we are looking for a special free software like IPPlan. So what we have nowadays: Ipplan (Beta IPv6 support) SolarWinds IP address tracker (IPv6 support unknown ) IP module of The NOC Project (BTW, take a look of it, seems to be very promising project) (IPv6 support unknown ) phpIP (Does not support IPv6) IP management from RackTables (Does not support IPv6) Do you know about any other special software, like written above? But: No Wiki No DNS No DHCP No spreadsheet Software should provide: Clear view of available addresses Detail listing of all addresses by subnets/search pattern/owners/additional info It must support adding additional info like owner of IP, domain-name, contacts, etc Multi user support Easy interface Software has to be specially written for address management. Scalability Any OS: win, lin, sol, web

  Read the article

• Resolving real IP address out of a dynamic dns address

  - by stavnir

  I recently opened a dynamic dns user (at no-ip for that matter..) for my own personal needs and especially for ssh-ing my computer whenever I need to, without knowing it's static IP. My questions are: Am I misusing the concept of dynamic dns? Are there more appropriate methods to do what I want to do? If not, how do I resolve my router's real ip address? Firefox somehow manages to do so, nslookup and other similar commands only resolve the ip of the ddns server (e.g. no-ip.org). Trying to figure this mystery with wireshark failed miserably ;)

  Read the article

• how to setup sonicwall tz210 to port forward packets received from external ip to another external ip

  - by lplp

  i have a sonicwall tz210 on a fixed ip, say ip1. And then i have, let's say a legacy server, with external ip ip2, which sends data to ip1 (and I have another server on ip1 behind the sonicwall which receives and processes that data). I would like to set up a new server on a different external ip ip3 that will receive and process data from the legacy server. How can I setup the sonicwall so that the packets received from the legacy server (from an external ip) are port forwarded to the external ip address ip3?

  Read the article

• Cannot acess the new cloned server even after new IP address assignment

  - by tough

  I was able to clone a Ubuntu 10.04 server residing in Cloud. It appeared that I was not getting some IP for the new VM so I followed some of these: # cd /etc/udev/rules.d # cp 70-persistent-net.rules /root/ # rm 70-persistent-net.rules # reboot I didn't follow the later commands as I was unable to see two eth MACs as available in the referenced site. After this I am able to see some the IP for it, and is different form the original IP, I have added new IP to DNS server. Now when I try to access it with its assigned(new) domain it is directed to the old server. I can see both the VMs running with different IP. Where I might have gone wrong, I am new to this admin thing.

  Read the article

• How can I compile an IP address to country lookup database to make available for free?

  - by Nick

  How would I go about compiling an accurate database of IP addresses and their related countries to make available as an open source download for any web developer who wants to perform a geographic IP lookup? It seems that a company called MaxMind has a monopoly on geographic IP data, because most online tutorials I've seen for country lookups based on IP addresses start by suggesting a subscription to MaxMind's paid service (or their less accurate free 'Lite' version). I'm not completely averse to paying for their solution or using the free one, but the concept of an accurate open source equivalent that anyone can use without restriction appeals to me, and I think it would be useful for the web development community. How is geographic IP data collected, and how realistic is it to hope to maintain an up-to-date open version?

  Read the article

• Choose IP Adress for Process to use on launch [duplicate]

  - by user1436026

  This question already has an answer here: How to set which IP to use for a HTTP request? 2 answers Say my server has the following IP addresses: 123.456.78.0 123.467.79.1 123.456.77.1 123.456.68.0 etc... Say I want to launch a process, say wget from the command line. Normally, I would do something like this: wget http://www.google.com/ Except that I would like to choose the IP address that my server uses to make this request. Is there a way to use wget or launch another command with a choice of one of my own IP addresses, like the following pseudo command: with-ip 123.456.68.0 wget http://www.google.com/

  Read the article

• Configure FTP Server with two different IP addresses on different subnets and separate NICs

  - by Luke

  I have an FTP server that's on a low bandwidth connection. We want to set it up with a second IP address on a much higher bandwidth connection. I set up the second interface with a static IP address on the faster connection. This unfortunately does not work. I can verify that the second IP address works perfectly when I disable the first IP address. What do I need to do to get two separate interface IP addresses on different subnets working on the same server?

  Read the article

• Establish connection with an IP camera behind a modem-router assigned with a private IP by Internet Service Provider?

  - by silvernightstar

  Most solutions out there require the modem-router to have been assigned a public IP by the ISP. After which, one can access the IP camera via a portforward setting on the router. However, my ISP only provides private IPs internal to their system (they probably have a limited pool of public IPs). So I am unable to view my IP cameras in the way described. I'm wondering if there's a way to work around this problem without having to need a public IP. Since, after all, two users on Yahoo Messenger or Facebook Chat are able to find one another and exchange data despite both sides being within the internal networks of their respective ISPs. Given that I only plan to view my IP cameras via iOS or Android running on a smartphone or tablet, any ready-to-use solutions out there?

  Read the article

• Why are the external IP of my router not the same as the external IP of my computer

  - by Martin

  I have a standard network setup where all my network devices, both WIFI and ethernet, are connected to the same router. Lately, however, I've been experiencing some very strange behavior. It started as a simple connecting error, when I tried to reach an FTP server using the external IP. Of course I went right into one of those CheckMyIP sites, to double check the IP and it turned out to be correct. Then I went into my router setup, which is through a tool called aiport-tool, because I have an Apple Aiport Extreme router. Turns out the router displays a different external IP, and for some reason that external IP works when I try to access the FTP server. Can anyone explain what is going on? Why are the devices connected to the router displaying an incorrect external IP? BTW i have no VPN/proxy setups on any of my devices.

  Read the article

• How I can I get my home network's IP address from a shell script?

  - by Steven Stewart-Gallus

  I have an account at a server at school, and a home computer that I need to work with sometimes. I have exchanged keys, and now only have one problem. While my school account has a name associated with it, "account_name@school", my home network does not. My plan is to have a script that every hour retrieves my home network's IP address, ssh'es into my school account and updates my ssh config file storing my home network's IP address. How can I retrieve my home computer's IP address from a shell script? P.S. Is this a sensible plan?

  Read the article

• Python in AWS Elastic Beasntalk: Private package dependencies

  - by Adam Matan

  I would like to deploy a Python Flask application on beanstalk. The application depends on external packages (e.g. geopy) and internal packages (e.g. adam_geography). The manual Create a requirements.txt file and place it in the top-level directory of your source bundle. This would probably fetch geopy and its dependencies, but would not fetch adam_geography which is available from a custom repo inside my VPC. How do I specify/upload private, internal Python package dependencies in a Beanstalk application?

  Read the article

• Ping server NETBIOS name returns wrong IP and "Destination host unreachable"

  - by music2myear

  Problem server is Windows 2008 R2 VM running on VMWare ESXi 4 host. Single network adapter manually assigned single IP address (192.168.1.11). When I ping the server from any other network computer, it returns 192.168.1.124 and "Destination host unreachable". Yesterday I found a second network adapter assigned to this server with an IP of 169.254... indicating it had no real valid IP. Using the MAC addresses I determined which adapter was not needed/not wanted, and removed it using VMWare systems. This is the network Printer Server and, understandably, nothing is printing right now. I've looked at the solutions here Why was my ping answered by a different IP address than the one pinged? and they aren't applicable to my situation for the following reasons: Output of arp -a on another computer returns the correct IP address (.1.11) assigned to the correct MAC address, the incorrect IP .1.124 is not listed, and the MAC of the network adapter I removed yesterday is not listed at all. I checked out the Microsoft KB article which listed pretty much my exact symptoms ( http://support.microsoft.com/kb/981953 ) and it says to check binding orders and look for hidden adapters. But there are no hidden adapters, and there is only one Network Adapter listed in the Binding Order list. Essentially, I can communicate from the server TO any other network device, but I cannot communicate from any other network device TO the server. Help! UPDATE: Solution found, see this solution for the details.

  Read the article

• How to fake ip at localhost without LoopBack.

  - by sexer

  How can i fake an ip on my own PC? for example if there were an ip address lets say 201.91.81.71, that Host is somewhere outside of my red and is hosting a webserver. How can set a website on my own PC, and when i go to browser and try to explore 201.91.81.71 it actually explore the website at my own PC? pd: I need it with IP addresses not domain names, since I need to implement it on a non-web service. First guess was installing a LoopBack with 201.191.81.71 as ip, but since some times the subnet works and some other it doesn't isn't a stable solution. Second guess was adding a route to route table : route add 201.91.81.71 mask 255.255.255.255 192.168.1.2 192.168.1.2 is the ip address of my NIC. If i could add this route it would work but windows doesn't let me do so. route add 201.91.81.71 mask 255.255.255.255 127.0.0.1 it doesn't let me set as gateway 127.0.0.1 if 201.91.81.71 isn't set in a NIC, so thats why i set sometimes loopback and this route add is auto, but it needs a subnet mask which doesn't match the ip and cannot set 255.255.255.255, im in real throubles here. can i get some help? thx.

  Read the article

• Elastic Caching Platforms Balance Performance, Scalability, And Fault Tolerance

  In this blog, a Forrester expert explains the benefit of elastic caching platforms.

  Read the article

• Elastic Caching Platforms Balance Performance, Scalability, And Fault Tolerance

  In this blog, a Forrester expert explains the benefit of elastic caching platforms.

  Read the article

• Oracle’s Sun Server X4-8 with Built-in Elastic Computing

  - by kgee

  We are excited to announce the release of Oracle's new 8-socket server, Sun Server X4-8. It’s the most flexible 8-socket x86 server Oracle has ever designed, and also the most powerful. Not only does it use the fastest Intel® Xeon® E7 v2 processors, but also its memory, I/O and storage subsystems are all designed for maximum performance and throughput. Like its predecessor, the Sun Server X4-8 uses a “glueless” design that allows for maximum performance for Oracle Database, while also reducing power consumption and improving reliability. The specs are pretty impressive. Sun Server X4-8 supports 120 cores (or 240 threads), 6 TB memory, 9.6 TB HDD capacity or 3.2 TB SSD capacity, contains 16 PCIe Gen 3 I/O expansion slots, and allows for up to 6.4 TB Sun Flash Accelerator F80 PCIe Cards. The Sun Server X4-8 is also the most dense x86 server with its 5U chassis, allowing 60% higher rack-level core and DIMM slot density than the competition.  There has been a lot of innovation in Oracle’s x86 product line, but the latest and most significant is a capability called elastic computing. This new capability is built into each Sun Server X4-8.   Elastic computing starts with the Intel processor. While Intel provides a wide range of processors each with a fixed combination of core count, operational frequency, and power consumption, customers have been forced to make tradeoffs when they select a particular processor. They have had to make educated guesses on which particular processor (core count/frequency/cache size) will be best suited for the workload they intend to execute on the server.Oracle and Intel worked jointly to define a new processor, the Intel Xeon E7-8895 v2 for the Sun Server X4-8, that has unique characteristics and effectively combines the capabilities of three different Xeon processors into a single processor. Oracle system design engineers worked closely with Oracle’s operating system development teams to achieve the ability to vary the core count and operating frequency of the Xeon E7-8895 v2 processor with time without the need for a system level reboot.  Along with the new processor, enhancements have been made to the system BIOS, Oracle Solaris, and Oracle Linux, which allow the processors in the system to dynamically clock up to faster speeds as cores are disabled and to reach higher maximum turbo frequencies for the remaining active cores. One customer, a stock market trading company, will take advantage of the elastic computing capability of Sun Server X4-8 by repurposing servers between daytime stock trading activity and nighttime stock portfolio processing, daily, to achieve maximum performance of each workload.To learn more about Sun Server X4-8, you can find more details including the data sheet and white papers here.Josh Rosen is a Principal Product Manager for Oracle’s x86 servers, focusing on Oracle’s operating systems and software. He previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

< Previous Page | 3 4 5 6 7 8 9 10 11 12 13 14  | Next Page >