Search Results

Search found 2101 results on 85 pages for 'nvidia geforce'.

Page 71/85 | < Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >

• About the External Graphics Card and CPU usage

  - by Balaji

  We are Rendering 16 live Streams at our client machine through one of our applications and the resolution of the video streams are as 4CIF/MPEG4/25FPS/4000Kbits. The configuration of the client machine is below. HP Desktop Machine: Microsoft Windows XP Intel (R) Core2 Duo CPU E8400 @ 3.00 GHz 2.99 GHz, 1.94 GB of RAM Intel (R) Q45/Q43 Series Express Chipset (Inbuild) The CPU usage of the machine peaks 99% for 16 streams. After some discussion, we had decided to install external graphics card to reduce the CPU usage. So that, we have tried following graphics cards. NVIDIA Quadro NVS 440 - 128 MB Radeon HD 4350 - 512 MB GDDR2 Redeon HD 4350 - 1GB DDR2 ASUS EAH 4350 Silent 1GB DDR2 But the performance wise there has been no difference - even a drop in performance. So, what is the purpose of these external graphics cards? Really it will reduce the CPU usage? What parameters have to check, if we want to reduce the CPU usage?

  Read the article

• Computer always freezing after random periods of time. No errors listed.

  - by Wesley

  Hi, all. Here are my specs beforehand: AMD Athlon XP 2400+ @ 2.00 GHz, 160GB IDE HDD, 128MB GeForce 6200 AGP, 2 x 512MB PC3200 DDR RAM, CoolMax 350W PSU, 1 x CD-RW Drive, 1 x DVD-ROM Drive, FIC AM37 Mobo, Windows XP Pro SP3 My desktop freezes after random periods of time but there are no errors listed in the Event Viewer after a forced shutdown and restart. A couple months ago, I found that when it froze, the floppy was being accessed at the same time. So, I disconnected the floppy (since I never used it anyways) from the power supply and motherboard. Everything was working fine and the computer never froze. This past Christmas break, I left for a Conference and when I got home, the computer kept freezing again. So, this time, I just disconnected the DVD reader (from mobo and power) and started it up. Still, it froze almost right away. Then I found some older sticks of RAM (2 x 256MB PC2100 DDR) and swapped them in. Everything worked fine again after that. I even swapped the 2 x 512MB PC3200 DDR RAM back in and everything worked okay. Then it started freezing again, and I tried all possible RAM combos, still freezing within 5-10 minutes of startup. One thing I've realized is that the floppy drive is still listed in My Computer and I uninstalled it from my Device Manager already. There were no software errors, and I uninstalled the most recent software, with no effect. Still, I have no idea what is wrong because everything ran fine before that. Any suggestions? EDIT: Still have yet to buy some blank CD media to use Memtest86+. However, would a lack of virtual memory cause the computer to freeze? EDIT2: So after a long time, I ran Memtest86+ and all is well. Turns out though, after removing my original DVD reader and replacing it with a DVD-ROM drive, there is no freezing whatsoever! Thanks for all your suggestions!

  Read the article

• Recommend a free temperature-monitoring utility for cores + video card, on Vista?

  - by smci

  Looking for your recommendations for a free temperature-monitoring utility, for my PC (Core 2) and graphics card for Vista. (Question reposted with the hyperlinks now I have 10 reputation). I don't want all the geeky details, I don't overclock, I don't see the need to mess with my fan speeds or motherboard settings, I just want something fairly basic to help with basic troubleshooting of intermittent overheats on video card and/or mobo: must run on Windows Vista (yes, don't laugh). ideally displays temperature when minimized to toolbar, and/or: automatically alerts me when temperature on either core or the video card exceeds a threshold ideally measures temperature of video card and system as well, not just the cores. HDD temperature is not necessary I think. logging is nice, graphs are also nice portability to Linux and Mac is nice Apparently Everest is the best paid option, but I'm not prepared to spend $40. I found the following free options, but no head-to-head at-a-glance comparison: CoreTemp (only does cores, not video card?) Open Hardware Monitor (nice graphs, displays when minimized to toolbar, no alerts) RealTemp (has alerts, works minimized, lightweight install) HWMonitor (no alerts, CNET: "[free version is] simple but effective") from CPUID CPUCool (not free: 21-day trialware, then $18) SpeedFan from Almico (too geeky, detail overload; CNET: "most users won't be able to make head or tail of the data this utility provides") Motherboard Monitor (CNET: not recommended, requires expert knowledge of your mobo, dangerous) Intel Thermal Analysis Tool (only does cores, not video card? has logging) Useful discussions I found: hardwarecanucks.com , superuser.com 1, 2 , forums.techarena.in (Update: I downloaded Real Temp 3.60 and it meets all my needs, the customizable alert temperature is great. Open Hardware Monitor seems to be the other one that mostly meets my needs, except no alerts; but it is portable. I tried SpeedFan but the interface is very cluttered, too much unnecessary detail (needs a Basic/Advanced mode and a revamp of the interface.) The answer to my underlying issue is nVidia Geforce LE 7500 video card which runs very hot.)

  Read the article

• MacBook Pro 13 (mid 2010 model) - External Display Low Resolution

  - by Unknown

  I am trying to connect my ASUS VH242H (1920x1020), with my Macbook Pro. The laptop has a 320m nvidia and it should be more than enough to support an external display. I had my old laptop connected, (with a 9600mgt) and it worked fine.I am not mirroring the display I just want an extension ( if possible only the external display diplaying). Why is the external display is showing only the lower (1378x768) resolution? I am using this adapter: http://www.amazon.co.uk/gp/product/B002WUVAVE/ref=oh_details_o00_s00_i00 Any help please?

  Read the article

• Dell docking station / Windows 7 not detecting HannsG JC199D via DVI

  - by user27150

  I have a laptop running Win7 that I use with a Dell docking station. I'd used it with XP for a couple years running dual monitors from the docking station, one from the VGA and one from the DVI. After upgrading to Win7, the monitor that's on the DVI out is not detected, using "rigorous detection" or otherwise. I've switched the cables to verify that it's not the monitor at fault-- but I can't find any info on why the monitor wouldn't be detected. I've got the latest and greatest Nvidia drivers installed (at least, as far as Windows update is aware). Leaving the laptop lid partly open does allow Windows to detect the laptop's native screen as well as the VGA monitor, but never the DVI. The monitors are HannsG JC199Ds. Any ideas? Thanks!

  Read the article

• ATI Catalyst setting to stretch Windows XP start bar across both displays

  - by scunliffe

  I have a Lenovo T400 laptop with an ATI Mobility Radeon HD 3400 Series video card, using the ATI Catalyst Control Center to span my Windows XP display over the laptop display and a Dell flatpanel LCD. This works fine, but I'm used to NVIDIA multi-desktop that let me control the "Start bar" to either exist on only 1 screen... be duplicated on both, or (what I want), stretched across both. Is this possible with the ATI card/Catalyst Software? If not, are there any utilities out there that will handle this for me? That is, what I have: +----------+ +----------+ | | | | | Lenovo | | Dell | | (primary)| | | +----------+ | | |Start Tray| | | +----------+ +----------+ And this is what I want: +----------+ +----------+ | | | | | Lenovo | | Dell | | (primary)| | | +----------+ +----------+ |Start | | Tray| +----------+ +----------+

  Read the article

• "Fuzzy" Display Problems on New OpenSUSE 11.3 Install

  - by Kryten

  Hi, I have a old Desktop that has a new installation of OpenSUSE 11.3 on it. To get straight to the point, whenever I try to start-up OpenSUSE, my display goes "fuzzy" (almost like a badly tuned TV) and sometimes (not always) my monitor goes black and says "Out of Range: 15.6kHz/49Hz": I assumed that this was a driver problem, so I download the drivers from nvidia and ran the shell script, completed and rebooted. Then OpenSUSE failed to boot with something like "nscd failed to start". At that point I decided to re-install and I did, but this time I tried un-checking "Automatic Configuration" to see if that helped. Got through the install and still have a problem. Unfortunately, my Linux troubleshooting skills are non-existent, so has anyone got any ideas on what could be the problem (is it the display driver?) and how I can fix the problem?

  Read the article

• Important hardware components to avoid bottlenecks/improve speed on a laptop?

  - by joelhaus

  Looking for a powerful general use (including web development) laptop running Windows. Price points seem to be all over the place. Many less powerful machines are priced much higher than machines with better specs. How does one navigate this market? Are there any unpublished/under-publicized specs/bottlenecks you look for? Understanding that hardware improves over time, is there an efficient ratio that can be used (or something similar, like Windows Experience Index?) which will indicate how powerful a system is? Thanks in advance! P.S. Here is an example from a laptop released on September 17, 2010. Can anyone pick apart these specs? Is there missing information you would be looking for? OS: Win 7 Display: 16.4" LED backlit Processor: Intel Core i7-740QM, 6MB L3 Cache RAM: 6GB DDR3 1333MHz (8GB max.) Graphics: NVIDIA GeForce GT 425M (1 GB of dedicated DDR3) HDD: 500GB 7200RPM SATA Hard Drive Removable Disc: Blue-ray with DVD±R/RW Misc: webcam/mic/speakers/bluetooth (via Sony Vaio VPC-F137FX/B)

  Read the article

• Having to Toggle Between Two Sets of Video Drivers

  - by Maarx

  So, I've got a Win7 64-bit gaming PC with GTX 260's. Recently, StarCraft 2 had an issue with flickering, which NVidia fixed with a new set of drivers. However, these new drivers induce unplayable graphical errors with Neverwinter Nights 2, something me and my friends still play from time to time. I am seeking advice on the "best" way to rectify this situation, to be able to switch between two driver releases, without compromising the stability of my system (if Windows stability isn't an oxymoron). I'm wondering if Windows 7 is structured in such a way that I can constantly reinstall these two sets of drivers back and forth overtop each other, possibly six or eight times a day, without very quickly driving myself to reformat to maintain that "just like new" performance. I'm loathe to have to reformat the drive and maintain two copies of the operating system, but I'll do it if I have to.

  Read the article

• How can I set up a touchscreen as the non-primary monitor in a dual monitor situation?

  - by bazzjedi

  I have been looking for information about using a second monitor, and thought of using a touchscreen. Will a touchscreen monitor work in a dual setup if it is not the main monitor? I haven't found any information on this; I've only found information about the touchscreen being the main monitor. That is, except at this SU question (snippet below): If you mean do the touch screen features still work on the other machine, the answer is yes. Past that, you can even see some of the touch screen features on a non touch screen monitor (just not the multi touch features!) For example, on the taskbar, click (without releasing) on any icon and then drag the mouse up, and you will see that it does the same as using your finger and dragging up. I have a HP 2510 for the main monitor. I'm thinking of adding a HP 2310ti (the touchscreen) as the secondary. My graphics card is a geforce gtx 295. I'm running Windows 7 Professional.

  Read the article

• Unable to diagnose Windows 7 lockup

  - by Delyan

  Basic info: Laptop Dell Studio XPS 13 (Intel P9600, 4GB RAM, NVidia 9400M card, 256G Samsung PM800 SSD) Windows 7 Ultimate, as well as Fedora 14 Here's the deal - Windows would just lock up out of nowhere, no log entries, no dumps, no BSOD, it just freezes. This happens mostly when idle (but it happened when I was using it too) and does not follow a concrete time frame. No input is accepted - only solution is to hold the power button. Although this sounds like a clean cut hardware issue, the reason I'm willing to rule this out is that my primary OS is Fedora 14. It's been working fine for the past 2 years and I've been stress testing the hardware (intentionally or not) every once in a while with no issues. I would like to ask if there's any way to get a diagnostic output from Windows in a situation such as this. The next step in my testing is to leave it in Safe Mode overnight and see if it locks up but even if I do that, I still need to figure out what component freezes it up during normal operation.

  Read the article

• I can't get my PC to start up by a normal way.

  - by ssice

  I couldn't write a more accurate title. I am just unable to start the computer by pressing the Power On button. I checked the Power Supply and it seems to give good voltage values in every pin. And this is not a BIOS malfunction because of bad overclocking or anything that may come to your mind. And I will tell you why. It happens that EPS (or any ATX-based) power supply has the ability to be powered-on by the Motherboard by jumping the 13th pin of the 24-pin-ATX-connector to COM/GND. I did it, after pushing the power on button (without any visual response) and, pwhaa! The machine turned on. I was able to read (and even write, if I wanted) BIOS values and then start any OS installed. Machine starts, so it's not any kind of misconfiguration. It seems some hardware related. I am able to power the machine on only if I already pushed the power on button. Though pushing it without jumping the 13th pin to ground for a second does not power the machine. Of course, jumping the pin without pushing the power on button does not tell the motherboard anything, so the computer would not start up either. It's as if the logic that connects the power button with the 13th pin derivation to GND was unable to be activated. What can be the issue? How can I solve it? My configuration is as follows: CPU: AMD Phenom 9850 X4 Black Edition MB: ASUS Formula II AM2 RAM: 2x2GB Corsair Dominator 5-5-5-15 2T @ 1066MHz DDR2 Tested also with only 1 module GPU: 2x XFX nVIDIA GeForce 9600 GT XxX Alpha Dog Edition @ Core: 540Mhz [SLi] Power Supply: Xilence 700W (ATX 12V 2.3 / EPS 12V 2.92 compatible) PS: I know the machine is like 2 years old. I hardly use it now, but my parents do.

  Read the article

• Video card not detected in POST on initial boot.

  - by Jeff M

  I have a minor problem with my desktop computer after cleaning it out for dust. When I first boot up the computer, the video card does not get detected so I can't see anything. In POST, I'm getting the "can't detect video card" beeps. The boot sequence continues normally, just without video. However, if I restart it (using the restart button) anytime after POST, it would boot up normally. I have no reason to think that the motherboard, video card or PSU got damaged in the process. It was working fine before, works fine after resetting. Took all the necessary precautions while cleaning. On the initial boot, I can hear the video card's fan power up but immediately power down and try again one more time only to fail. After the beep, resetting gets everything running and sounding normally. I've reseated the card a couple of times and reset the BIOS but doesn't seem to help. I'm hoping I won't have to take it out and remove and reinstall everything again. Does anyone recognize these symptoms to know exactly what the problem is? My guess is that the video card isn't getting enough juice initially to be running stable to be detected. I just don't know what I did (or didn't do) to get it to be in this state. It's not a high priority thing for me at the moment, just means I have to always reset it after initially turning it on but will eventually remove everything and reinstall if it comes to that. I don't think the specs are relevant here but just in case, here's the relevant stuff: Motherboard: Gigabyte P35-DS3P Video: EVGA GeForce 8600 GTS PSU: Antec True Power Trio 650W Built ~2 years ago, still running well

  Read the article

• Missing Right Click Menu Text After Sleep

  - by petebob796

  I have a laptop running Windows 7 and regularly close the lid to put it in sleep mode. Recently after resuming from sleep if I go to access the right click menu in the windows shell when I hover over the menu items the text disappears and doesn't re-appear without closing the menu and right clicking again. The only way to fix this is to restart. Any ideas what could be causing this? I have an nvidia 8600m gs graphics card which had a BSOD problem a while back at boot up but since I underclocked it slightly it has been running fine and I experience no other issues but this. This only affects right click menus that are part of the windows so not any programs right click menu. It's not a major problem just strange and a little annoying.

  Read the article

• Switched from DVI to HDMI, possible audio artifacts?

  - by I take Drukqs

  I'm using an ASUS VH236H monitor and an EVGA GeForce 570 GTX both of which are brand new. My monitor has an audio out port for speakers/headphones so I plugged in my headphones and made a random selection from my library when I noticed two things: There are static-like artifacts during "louder" parts of songs. There's what seems to be a volume cap in place. When I crank the volume past 100% in VLC the decibel level does not truly increase but the amount of static does. The cable is not new; I yanked it off of my PS3 when my DVI cable broke. It has been used a good amount on my HDTV and PS3 so I doubt it's a matter of burn-in. I like the way the setup works with an HDMI cable as opposed to DVI because my headphones barely reach my rig whereas I have plenty of slack when they're plugged into my monitor. Thanks in advance for any support. Note: I'm using a high quality HDMI cable from monoprice, AKG K702 headphones, and VLC media player.

  Read the article

• Very fast Laptop Heating due to very high CPU usage by dwm.exe

  - by Sushan Shrestha

  My laptop gets heated very fast and when I check the task manager, I find dwm.exe consuming very high CPU (mostly 100%). In the beginning I found the message "The graphic adapter has been stopped and recovered".Also I am getting one error message "Cidaemon.exe has stopped working" very frequently. During this period also, cpu usage is 100% which is consumed by dwm.exe. I have run ccleaner and Kingsoft PC doctor monitor to fix the register problem but the problem has not been solved. My display adaptor is : NVIDIA NVS 5200M. After the driver update, I am not getting "The graphic adapter has been stopped and recovered" but dwm.exe is still consuming 100% CPU one time in about 5 mins. Multiple restarts has not helped. Laptop Model: Dell Latitude E6430. Thanks in advance.

  Read the article

• Winamp has slow /skipping video playback on Windows 7

  - by Roy Rico

  Hello, I have Windows 7 x64 (7600 90-day trial version) and Winamp 5.6 installed. When I play a video in Windows Media Player, the video plays smooth, however when I play a video in winamp, the video is mostly ok when played back at the original size (but not completely), but if I play it back in fullscreen, the playback gets really slow. The video's audio track plays just fine. I have a DELL XPS 420 computer (8GB of RAM) with a Nvidia GeForce 8800 CTS 512 video card. I've updated to the latest drivers. I have the default Windows 7 codecs, and the CCCP codec pack which used to be all I needed under Windows XP to play all types of videos. Are the codecs needed for Windows Y the same? What's going on? UPDATE: As suggested, I turned off Aero and winamp ran just fine again. So I just have to wait for winamp to be rewritten to work with the way Vista/Windows 7 runs? UPDATE 2: Winamp has updated their player, and it works great with Windows 7 now.

  Read the article

• Dell Latitude E6420 dual-boot Ubuntu + Windows 7 Optimus graphics problems

  - by Ryan

  I have a Dell Latitude E6420 laptop with Ubuntu 12.04 alongside Windows 7 (dual-boot) docked in a docking station with 2 DVI outputs. It took me a week of tinkering to get the dual external monitors to work in Ubuntu, and I had to disabled the "Optimus" feature in the BIOS. But now neither external monitor is detected in Windows, and the resolution is also very low. Do you know how I can successfully dual-boot Windows 7 and Ubuntu on this machine using my 2 external DVI monitors? I have an open question here too, trying to resolve this same issue: http://askubuntu.com/questions/146933/dock-with-dual-external-dvi-monitors-with-intel-nvidia-optimus

  Read the article

• blue screen of death - softwares for find and fix on damaged drive with another operating system

  - by SilverLight

  last night i got a virus in my windows 7. after reset my computer i got blue screen of death like below : my windows 7 minidump for finding the problem i have another operating system in my computer (windows xp). is there a software for find and fix the problem in windows 7 drive? how can i see event logs of windows 7 with windows xp? edit : Last known good gonfiguration or safe mode in boot menu did n't help and still have the problem. i have nvidia graphic card on my system.but how can i fix it's driver from windows xp and i don't know it's in relationship with that bsod or not?

  Read the article

• Linux kernel startup problems: how to analyze?

  - by java.is.for.desktop

  Hello, everyone! After manually updating the kernel from 2.6.33 to 2.6.34 on my OpenSuse 11.2 Notebook, it stops after the message Loading drivers, configuring devices... This stop can be interrupted with Ctrl-C, but when the system enters runlevel 5, no partitions are mounted (but the root partition), many services fail to start, and other strange things are going on. No X11. NOTE: I manually updated the kernel many times before, it worked. Yes, I know, in case of NVidia, the driver has to be recompiled. The question is: How can I analyze the cause of the problem? Doing dmesg gives me soooo much output, I can't "map" it to the output which I see at startup. The output does not contain the string Loading drivers, configuring devices, or similar.

  Read the article

• Where should I plug in my monitor -- Motherboard or Graphics card?

  - by Jeremy White

  Assuming I am using the following equipment... motherboard with HDMI/DVI & no embedded graphics discrete graphics card (nVidia or ATI) on PCI-E slot Intel CPU with integrated graphics ...where should I plug my monitor into the computer? Presumably, I'll get the fastest speed on games connected directly to the graphics card. But there is also power savings when connecting to the motherboard and accessing the Intel on-board graphics. I've read that some motherboards can switch automatically between the Intel graphics and discrete graphics. Is that something that works well, and where do I connect the monitor to enable that?

  Read the article

• Why is Windows Explorer not responding?

  - by William Barnes

  I am having the seemingy popular problem with Widows Explorer not responding. I have tried the AUTRUNS and turned off everything recommended. I have run SCANNOW 3 times and it comes back clean. When booting in safe mode it appears to work. I read someplace that the problem could be a service program, but can't remember where I read it or how to do it. Something about turning off all service programs and then turning them back on one at a time. The problem is I don't remember what it said to do. Any and all help is greatly appreciated. as an FYI here is my system stats Sorry I can't access that part of control panel right now because windows explore not responding. I have an HPdesk top with a AMD quad core processor 1.8GB 1.5TB sata drives (a 1TB and a 500GB) Nvidia 8400 graphics card a 2mb internet connetion wireless 2 DBD R?W drives. Any help is greatly apprciated

  Read the article

• Will Windows Barf on Constant Video Driver Overwrite?

  - by Maarx

  So, I've got a Win7 64-bit gaming PC with GTX 260's. Recently, StarCraft 2 had an issue with flickering, which NVidia fixed with a new set of drivers. However, these new drivers induce unplayable graphical errors with Neverwinter Nights 2, something me and my friends still play from time to time. I am seeking advice on the "best" way to rectify this situation, to be able to switch between two driver releases, without compromising the stability of my system (if Windows stability isn't an oxymoron). I'm wondering if Windows 7 is structured in such a way that I can constantly reinstall these two sets of drivers back and forth overtop each other, possibly six or eight times a day, without very quickly driving myself to reformat to maintain that "just like new" performance. I'm loathe to have to reformat the drive and maintain two copies of the operating system, but I'll do it if I have to.

  Read the article

• Codecs, Premiere Pro & Quicktime: Import or Play Error

  - by Nchpmn

  Original Question I've been using a FS-H200 (not the Pro variant) recorder with a JVC ProHD camera. I have been shooting with the DTE FORMAT to Quicktime (.mov). I copied the files to an external hard drive and am now trying to edit. The files will play back in VLC, as they would be expected to. However they will not import into Adobe Premiere CS5.5, instead giving an error: Unsupported format or damaged file. Quicktime gives the following error when attempting to play the files: Error -2002: a bad public movie atom was found in the movie (Filename) To try and fix this, I have installed the following codec packs: K-Lite Codec Pack 64-bit Full (version 5.9, latest) K-Lite Codec Pack 32-bit Full (version 8.4, latest) MainConcept Codec Suite (Broadcast) v5.1 for Adobe CS5 Reinstalled Quicktime with new download from Apple The same errors and problems still exist. From this I can assume that there is an issue with Quicktime and that is what Premiere is using as an encoder/decoder for the codec. Is there any way to fix this? From looking at the "Codec Information" from VLC: Stream 0 Type: Video Codec: MPEG-1/2 (mpgv) Language: English Resolution: 1280 x 720 Frame Rate: 25 Stream 1 Type: Audio Codec: PCM S16 BE (twos) Language: English Channels: Stereo Sample Rate: 48000 Hz Bits per sample: 16 Other computer specs: Windows 7 Professional 64-bit (SP1) Gigabyte Z68X-UD3-B3 Intel i7-2600K 16GB DDR3 2TB WD 7200RPM SATA 6Gb/s LaCie d2 Quadra 2TB v3 7200RPM (External HDD) NVIDIA GeForce GTX 560 Ti Golden Sample Updates 2012-03-11 @ 2050 AEDT MPEG Steamclip doesn't recognise, play or convert the footage. File open error: unrecognised file type. [Open Anyway] File open error: can't find video or audio tracks. 2012-03-24 @ 1920 AEDT Had to transcode the footage. :(

  Read the article

• RandR 1.4 Optimus Dual Monitor

  - by mathepic

  So, I have a dual monitor setup. HDMI comes in through Nvidia, main display is through Intel (I think). I want to use XMonad with the dual setup, and I want to be able to run with or without the second monitor. Is this even doable? I'm using RandR 1.4 and can get both monitors to display something at the same time (by messing with xrandr) but XMonad can never detect more than one rectangle form Xinerama. Does anyone have a working multi-monitor xinerama or twinview configuration that works with optimus/randr 1.4?

  Read the article

< Previous Page | 67 68 69 70 71 72 73 74 75 76 77 78  | Next Page >