Search Results

Search found 22641 results on 906 pages for 'case'.

Page 711/906 | < Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >

  • Printing out this week's dates in perl

    - by ABach
    Hi folks, I have the following loop to calculate the dates of the current week and print them out. It works, but I am swimming in the amount of date/time possibilities in perl and want to get your opinion on whether there is a better way. Here's the code I've written: #!/usr/bin/env perl use warnings; use strict; use DateTime; # Calculate numeric value of today and the # target day (Monday = 1, Sunday = 7); the # target, in this case, is Monday, since that's # when I want the week to start my $today_dt = DateTime->now; my $today = $today_dt->day_of_week; my $target = 1; # Create DateTime copies to act as the "bookends" # for the date range my ($start, $end) = ($today_dt->clone(), $today_dt->clone()); if ($today == $target) { # If today is the target, "start" is already set; # we simply need to set the end date $end->add( days => 6 ); } else { # Otherwise, we calculate the Monday preceeding today # and the Sunday following today my $delta = ($target - $today + 7) % 7; $start->add( days => $delta - 7 ); $end->add( days => $delta - 1 ); } # I clone the DateTime object again because, for some reason, # I'm wary of using $start directly... my $cur_date = $start->clone(); while ($cur_date <= $end) { my $date_ymd = $cur_date->ymd; print "$date_ymd\n"; $cur_date->add( days => 1 ); } As mentioned, this works - but is it the quickest/most efficient/etc.? I'm guessing that quickness and efficiency may not necessarily go together, but your feedback is very appreciated.

    Read the article

  • Mercurial: applying changes one by one to resolve merging issues

    - by Webinator
    I recently tried to merge a series of changeset and encountered a huge number of merging issues. Hence I'd like to to try to apply each changeset, in order, one by one, in order to make the merging issues easier to manage. I'll give an example with 4 problematic changesets (514,515,516 and 517) [in my real case, I've got a bit more than that] o changeset: 517 | o changeset: 516 | o changeset: 515 | o changeset: 514 | | | @ changeset: 513 | | | o changeset: 512 | | | o | | | o | | | o |/ | | o changeset 508 Note that I've got clones of my repos before pulling the problematic changesets. When I pull the 4 changesets and try a merge, things are too complicated to resolve. So I wanted to pull only changeset 514, then merge. Then once I solve the merging issue, pull only changeset 515 and apply it, etc. (I know the numbering shall change, this is not my problem here). How am I supposed to do that, preferably without using any extension? (because I'd like to understand Mercurial and what I'm doing better). Is the way to go generate a patch between 508 and 514 and apply that patch? (if so, how would I generate that patch) Answers including concrete command-line example(s) most welcome :)

    Read the article

  • Detecting Singularities in a Graph

    - by nasufara
    I am creating a graphing calculator in Java as a project for my programming class. There are two main components to this calculator: the graph itself, which draws the line(s), and the equation evaluator, which takes in an equation as a String and... well, evaluates it. To create the line, I create a Path2D.Double instance, and loop through the points on the line. To do this, I calculate as many points as the graph is wide (e.g. if the graph itself is 500px wide, I calculate 500 points), and then scale it to the window of the graph. Now, this works perfectly for most any line. However, it does not when dealing with singularities. If, when calculating points, the graph encounters a domain error (such as 1/0), the graph closes the shape in the Path2D.Double instance and starts a new line, so that the line looks mathematically correct. Example: However, because of the way it scales, sometimes it is rendered correctly, sometimes it isn't. When it isn't, the actual asymptotic line is shown, because within those 500 points, it skipped over x = 2.0 in the equation 1 / (x-2), and only did x = 1.98 and x = 2.04, which are perfectly valid in that equation. Example: In that case, I increased the window on the left and right one unit each. My question is: Is there a way to deal with singularities using this method of scaling so that the resulting line looks mathematically correct? I myself have thought of implementing a binary search-esque method, where, if it finds that it calculates one point, and then the next point is wildly far away from the last point, it searches in between those points for a domain error. I had trouble figuring out how to make it work in practice, however. Thank you for any help you may give!

    Read the article

  • Adding Control to Container Control that is in User Control - How to properly initialize?

    - by DougJones
    Let's say I have a user control MyUserControl, which has a container control (it's a server control, but it could just be a Panel) and a dropdownlist. The dropdownlist is not in the container control initially. In it's code-behind, I am overriding OnInit and creating the user control, which includes populating a dropdownlist and adding that dropdownlist to my container control. I have a public property Year, which is an int. Based on the value of Year, I want to populate the dropdownlist. The problem is that in OnInit, year is always 0. On the page Init, I am setting year, but that doesn't run until AFTER the control's Init runs. If I try to set the value on PreInit on the page, the page hasn't initialized the control and I get invalid null reference when setting a value to the control. My question is: How can I properly initialize the control? How can I set the value on the page, before the control actually gets initialized? If I move the control's code to OnLoad, it'll work until I have to do a postback. In this case I need to, though!

    Read the article

  • How to return proper 404 for google while providing user friendly content to the user?

    - by Marek
    I am bouncing between posting this here and on Superuser. Please excuse me if you feel this does not belong here. I am observing the behavior described here - Googlebot is requesting random urls on my site, like aecgeqfx.html or sutwjemebk.html. I am sure that I am not linking these urls from anywhere on my site. I suspect this may be google probing how we handle non existent content - to cite from an answer to the linked question: [google is requesting random urls to] see if your site correctly handles non-existent files (by returning a 404 response header) We have a custom page for nonexistent content - a styled page saying "Content not found, if you believe you got here by error, please contact us", with a few internal links, served (naturally) with a 200 OK. The URL is served directly (no redirection to a single url). I am afraid this may discriminate the site at google - they may not interpret the user friendly page as a 404 - not found and may think we are trying to fake something and provide duplicate content. How should I proceed to ensure that google will not think the site is bogus while providing user friendly message to users in case they click on dead links by accident?

    Read the article

  • How to bind "rest" variables to list of values in macro in Scheme

    - by Slartibartfast
    I want to make a helper macro for writing match-extensions. I have something like this: (define-match-expander my-expander (? (stx) (let* ([dat (cdr (syntax-e stx))] [var1 (car dat))] [var2 (cadr dat)]) ;transformer goes here ))) So I wanted a macro that will do this let binding. I've started with something like this: (define-syntax-rule (define-my-expander (id vars ...) body) (define-match-expander id (? (stx) (match-let ([(vars ...) (cdr (syntax-e stx))]) body)))) but match-let isn't defined in transformation time. First question would be is there any other way of doing this (making this expanders, I mean)? Maybe there is already something similar in plt-scheme that I'm not aware of, or I'm doing it wrong in some way. Regardless of answer on the first question, if I ever want to bound list of variables to list of values inside of a macro, how should I do it? EDIT: In combination with Eli's answer macro now looks like this: (define-syntax-rule (define-my-expander (id vars ...) body) (define-match-expander id (? (stx) (syntax-case stx () [(_ vars ...) body]))))

    Read the article

  • What is the Difference between GC.GetTotalMemory(false) and GC.GetTotalMemory(true)

    - by somaraj
    Hi, Could some one tell me the difference between GC.GetTotalMemory(false) and GC.GetTotalMemory(true); I have a small program and when i compared the results the first loop gives an put put < loop count 0 Diff = 32 for GC.GetTotalMemory(true); and < loop count 0 Diff = 0 for GC.GetTotalMemory(false); but shouldnt it be the otherway ? Smilarly rest of the loops prints some numbers ,which are different for both case. what does this number indicate .why is it changing as the loop increase. struct Address { public string Streat; } class Details { public string Name ; public Address address = new Address(); } class emp :IDisposable { public Details objb = new Details(); bool disposed = false; #region IDisposable Members public void Dispose() { Disposing(true); } void Disposing(bool disposing) { if (!disposed) disposed = disposing; objb = null; GC.SuppressFinalize(this); } #endregion } class Program { static void Main(string[] args) { long size1 = GC.GetTotalMemory(false); emp empobj = null; for (int i = 0; i < 200;i++ ) { // using (empobj = new emp()) //------- (1) { empobj = new emp(); //------- (2) empobj.objb.Name = "ssssssssssssssssss"; empobj.objb.address.Streat = "asdfasdfasdfasdf"; } long size2 = GC.GetTotalMemory(false); Console.WriteLine( "loop count " +i + " Diff = " +(size2-size1)); } } } }

    Read the article

  • Saving HttpResponse/Request to file system

    - by chrisjlong
    Here is my scenario. User fills out this large page which is dynamically created based off DB values. Those values can change. When the user fills out the page and hits submit we want to save a copy of the page as html on the server, this way if the text or wording changes, when they go back to view their posted information, it is historically accurate. So I basically need to do this protected void buttonSave_Click(object sender, EventArgs e) { //collect information into an object to save it in the db bool result = BusinessLogic.Save(myBusinessObject); if (result) //!!! Here is where I need to save this page as an html file on my servers IFS!!!! else //whatever Response.Redirect("~/SomeOtherPage.aspx"); } Any help is greatly apprciated. Also I CANNOT just request the data from the url because query string parameters are a big no no in this case. The key to pull the database info up (at its highest level) is all in session so I cant just request a url and save it. Thanks!

    Read the article

  • iPhone SDK allow touches to affect multiple views

    - by Parad0x13
    I have a main view that has has two buttons on it that control methods to display the next image and display the previous image. In this case the 'Image' is a class that inherits from UIImageView and has multiple pictures on it that you can interact with, and I call this class a 'Pane'. The pane itself handles all the user interaction itself while the main view controls the display of next and previous panes with the buttons. Here is my dilemma, because the pane fully covers the main view it wont allow for the user to tap the buttons on the main view! So once a pane pops up you cannot change it via the buttons! Is there a way to allow touches through transparent parts of a view, or if not how in the world do I achieve this?! I cannot pass touchesBegan or any of those methods from the pane to the superview because all of the button touch methods are created in the xib file. I cannot insert the pane under the control panel because then you wouldn't be able to interact with the pane. And as far as I know theres no way to pass touch events to every single pane within the paneHoldingArray that belongs to the main view I cannot add the command buttons inside of the pane because I want to be able to replace the command button's image with a thumbprint render of the next/previous pane. I've been stuck on this for a very long time, please somebody help me out with a fix action or a new way to re-engineer the code so that it will work!

    Read the article

  • Assign a unique client ID to each <rich:dataTable /> row?

    - by Dolph Mathews
    I'm relatively new to working with the UI in Seam, so I'm hoping there is something simple I can replace the three instances of UNIQUE_ID with in the following example (such as #{object.uniqueId}). The goal is to have a <rich:dataTable /> wherein each row has the ability to show/hide a <rich:modalPanel /> with more details about the particular object instance. <rich:dataTable var="object" value="#{bean.myObject}"> <rich:column> <h:outputText value="#{object.summary}" /> </rich:column> <rich:column> <a onclick="Richfaces.showModalPanel('UNIQUE_ID');" href="#">Show Details in ModalPanel</a> <a4j:form> <rich:modalPanel id="UNIQUE_ID" > <a onclick="Richfaces.hideModalPanel('UNIQUE_ID');" href="#">Hide This ModalPanel</a> <h:outputText value="#{object.details}" /> </rich:modalPanel> </a4j:form> </rich:column> </rich:dataTable> If I only had one link/modalPanel pair, this would obviously be trivial, but I don't know what to do within the scope of the <rich:dataTable />'s iteration. Also, in case it complicates things further, the page will also contain many <rich:dataTable />'s, each implementing this behavior.

    Read the article

  • Sensible unit test possible?

    - by nkr1pt
    Could a sensible unit test be written for this code which extracts a rar archive by delegating it to a capable tool on the host system if one exists? I can write a test case based on the fact that my machine runs linux and the unrar tool is installed, but if another developer who runs windows would check out the code the test would fail, although there would be nothing wrong with the extractor code. I need to find a way to write a meaningful test which is not binded to the system and unrar tool installed. How would you tackle this? public class Extractor { private EventBus eventBus; private ExtractCommand[] linuxExtractCommands = new ExtractCommand[]{new LinuxUnrarCommand()}; private ExtractCommand[] windowsExtractCommands = new ExtractCommand[]{}; private ExtractCommand[] macExtractCommands = new ExtractCommand[]{}; @Inject public Extractor(EventBus eventBus) { this.eventBus = eventBus; } public boolean extract(DownloadCandidate downloadCandidate) { for (ExtractCommand command : getSystemSpecificExtractCommands()) { if (command.extract(downloadCandidate)) { eventBus.fireEvent(this, new ExtractCompletedEvent()); return true; } } eventBus.fireEvent(this, new ExtractFailedEvent()); return false; } private ExtractCommand[] getSystemSpecificExtractCommands() { String os = System.getProperty("os.name"); if (Pattern.compile("linux", Pattern.CASE_INSENSITIVE).matcher(os).find()) { return linuxExtractCommands; } else if (Pattern.compile("windows", Pattern.CASE_INSENSITIVE).matcher(os).find()) { return windowsExtractCommands; } else if (Pattern.compile("mac os x", Pattern.CASE_INSENSITIVE).matcher(os).find()) { return macExtractCommands; } return null; } }

    Read the article

  • Existing LINQ extension method similar to Parallel.For?

    - by Joel Martinez
    The linq extension methods for ienumerable are very handy ... but not that useful if all you want to do is apply some computation to each item in the enumeration without returning anything. So I was wondering if perhaps I was just missing the right method, or if it truly doesn't exist as I'd rather use a built-in version if it's available ... but I haven't found one :-) I could have sworn there was a .ForEach method somewhere, but I have yet to find it. In the meantime, I did write my own version in case it's useful for anyone else: using System.Collections; using System.Collections.Generic; public delegate void Function<T>(T item); public delegate void Function(object item); public static class EnumerableExtensions { public static void For(this IEnumerable enumerable, Function func) { foreach (object item in enumerable) { func(item); } } public static void For<T>(this IEnumerable<T> enumerable, Function<T> func) { foreach (T item in enumerable) { func(item); } } } usage is: myEnumerable.For<MyClass>(delegate(MyClass item) { item.Count++; });

    Read the article

  • C++ wxWidgets Event Handling

    - by Wallter
    Q1:I am using wxWidgets (C++) and have come accost a problem that i can not locate any help. I have created several wxTextCtrl boxes and would like the program to update the simple calculations in them when the user 'kills the focus.' I could not find any documentation on this subject on the wxWidgets webpage and Googling it only brought up wxPython. The two events i have found are: EVT_COMMAND_KILL_FOCUS - EVT_KILL_FOCUS for neither of which I could find any snippet for. Could anyone give me a short example or lead me to a page that would be helpful? Q2:Would i have to create an event to handle the focus being killed for each of my 8 wxTextCtrl boxes? In the case that i have to create a different event: How would i get each event to differentiate from each other? I know i will have to create new wxID's for each of the wxTextCtrl boxes but how do I get the correct one to be triggered? class BasicPanel : public wxPanel { ... wxTextCtrl* one; wxTextCtrl* two; wxTextCtrl* three; wxTextCtrl* four; ... }

    Read the article

  • GWT : Internet Explorer transparency issue

    - by dindeman
    This post concerns only IE. The last line of the following code is causing the issue. int width = 200; int height = 200; int overHeight = 40; AbsolutePanel absPanel = new AbsolutePanel(); absPanel.setSize(width + "px", height + "px"); SimplePanel underPanel = new SimplePanel(); underPanel.setWidth(width + "px"); underPanel.setHeight(height + "px"); underPanel.getElement().getStyle().setBackgroundColor("red"); SimplePanel overPanel = new SimplePanel(); overPanel.setWidth(width + "px"); overPanel.setHeight(overHeight + "px"); overPanel.getElement().getStyle().setBackgroundColor("black"); //Setting the IE opacity to 20% on the black element in order to obtain the see through effect. overPanel.getElement().getStyle().setProperty("filter", "alpha(opacity=20)"); absPanel.add(underPanel, 0, 0); absPanel.add(overPanel, 0, 0); RootPanel.get("test").add(absPanel); //The next line causes the problem. absPanel.getElement().getStyle().setProperty("filter", "alpha(opacity=100)"); So basically this code should display a red square of 200px by 200px (see underPanel in the code) and on top of it a black rectangle of 200px by 40px (see overPanel in the code). However the black rectangle is partially see through since its transparency is set to 20%, therefore it should appear in red, but of a darker red than the rectangle sitting under since it is actually a faded black item. Some rendering problem occurs because of the last line of code that sets the opacity of the containing AbsolutePanel to 100% (which in theory should not affect the visual result). Indeed in that case the panel lying over remains still see through but straight through the background colour of the page! It's like if the panel sitting under was not there at all... Any ideas? This is under GWT 2.0 and IE7.

    Read the article

  • jQuery validation plugin - removing elements

    - by d3020
    I'm using the jQuery validation plugin. On most of my input type... tags I have class='required'. When I submit the page, via JavaScript, the controls on the page that have this class are found. However, there are a handful of checkboxes that I don't need to validate. I've tried removing the class code completely from the input tag, also tried class='cancel', and class='required:false. When doing any of those things though when the form submits it can't find the checkbox control. How do I still keep the ability to do Request.Form and find my checkbox object but at the same time when the form submits don't apply validation to this particular control. Thank you. Edit here. This is what I'm using without the "checked" code and ternary operator. In my input tag I'm calling a function like this... sb.Append(" " + crlf); Inside that function is where I check for the True or False coming back, like this. case "chkFlashedCarton": strResultValue = pst.FlashedCarton.ToString(); if (strResultValue == "True") { strResultValue = " checked"; } break; strResultValue is what is returned back. Does this help to see? Thank you.

    Read the article

  • HTTP: can GET and POST requests from a same machine come from different IPs?

    - by NoozNooz42
    I'm pretty sure I remember reading --but cannot find back the links anymore-- about this: on some ISP (including at least one big ISP in the U.S.) it is possible to have a user's GET and POST request appearing to come from different IPs. (note that this is totally programming related, and I'll give an example below) I'm not talking about having your IP adress dynamically change between two requests. I'm talking about this: IP 1: 123.45.67.89 IP 2: 101.22.33.44 The same user makes a GET, then a POST, then a GET again, then a POST again and the servers see this: - GET from IP 1 - POST from IP 2 - GET from IP 1 - POST from IP 2 So altough it's the same user, the webserver sees different IPs for the GET and the POSTs. Surely seen that HTTP is a stateless protocol this is perfectly legit right? I'd like to find back the explanation as to how/why certain ISP have their networks configured such that this may happen. I'm asking because someone asked me to implement the following IP filter and I'm pretty sure it is fundamentally broken code (breaking havoc for at least one major american ISP users). Here's a Java servlet filter that is supposed to protect against some attacks. The reasoning is that: "For any session filter checks that IP address in the request is the same that was used when session was created. So in this case session ID could not be stolen for forming fake sessions." http://www.servletsuite.com/servlets/protectsessionsflt.htm However I'm pretty sure this is inherently broken because there are ISPs where you may see GET and POST coming from different IPs. Any info on this subject is very welcome.

    Read the article

  • Splitting build cross the network?

    - by Dandikas
    Is there a known solution for splitting build process cross the network machines? Use case: We are an average software development company. We own around 50 development workstations (Quad Core 2.66Ghz, 4 GB ram, 200 GB raid). No need to tell that at any single moment not every machine is loaded to the max. There are 5 to 15 projects running simultaneously at any single moment. Obviously all of them are continuously build on server, than deployed to proper environment. Single project build is taking from 3 to 15 minutes. The problem: Whenever we build 5 projects in a row the last project is going to be ready after around 25 - 50 minutes. Building in parallel does not solve the problem (build is only a part of the game, than you need to deploy, run tests etc.) YES the correct solution is to add another build server, but "That involves buying new Expensive hardware, and we already spent a lot!". Yea, right(damn them)! Anyway. What about splitting build among developers workstation? Lets say whenever we need to build project "A" we check 5 workstations and start build on all that are not overloaded. The build can be canceled by a developer if he really needs all the power of his machine as long as there is at least 1 machine that is still building. After build is finished deployment can be performed to a proper environment (hosted on some server, not on workstation :) ). The bigger the company the more this makes sense to me. Anyone tried something like this? Are there any good practices? Any helpful software? (90% of the projects are .net C#)

    Read the article

  • Domain Transfer Protection - need advice

    - by Jack
    Hey, I am about to purchase a domain name for a bit of money. I do not personally know the person who I am purchasing the domain name from, we have only chatted via email. The proposed process for the transfer is: The owner of the domain lowest the domain name security and emails me the domain password, I request the transfer After the request, I transfer the money via PayPal When the money has been cleared the current domain name owner confirms the transfer via the link that he receives in that email I wait for it to be transferred. The domain is currently registered with DirectNIC - http://www.directnic.com/ Is this the best practice? Seeing I am paying a bit of money for this domain name, I am worried that after the money has been cleared that I won't see the domain name or hear from the current domain name owner again. Is there a 'domain governing body' which I can report to if this is the case? Is the proposed transfer process the best solution? Any advice would be awesome. Thanks! Jack

    Read the article

  • Returning a CSS element

    - by TMP
    Is there a way to return a CSS element? I was using Adobe Edge and adding some of my own code in their code tab, but in order to create boundaries I would need to keep track of margin-top or margin-left. The following code works to move the element "woo" but I'm not sure how to call the elements to add something like "|| sym.$("woo").css({"margin-left"0px"}) to the move left code. //Move RIGHT if (e.which == 39) { sym.$("woo").css({"margin-left":"+=10px"}); } //Move UP else if (e.which == 38) { sym.$("woo").css({"margin-top":"-=10px"}); } //Move Left else if (e.which == 37) { sym.$("woo").css({"margin-left":"-=10px"}); } //Move DOWN else if (e.which == 40) { sym.$("woo").css({"margin-top":"+=10px"}); } EDIT: I changed the Left if statement to the following: else if (e.which == 37 && ($("woo").css("margin-left")>0)) { It seems to be working to some extent except for now it won't move left at all! I tried doing <0 too in case I was screwing up a sign but it won't let me move the element left either.

    Read the article

  • Making a query result equal to zero when a condition is null

    - by John
    Hello, I believe the query below should work. However, when I run it, the results are blank. I think this is happening since for now, the table "comment" is empty. So there is no instance where s.submissionid = c.submissionid. I would like to have the query below to work even if there if no s.submissionid that equals a c.submissionid. In this case, I would like countComments to equal zero. How can I do this? Thanks in advance, John $sqlStr = "SELECT s.loginid, s.submissionid s.title, s.url, s.displayurl, l.username, count(c.comment) AS countComments FROM submission AS s, login AS l, comment AS c, WHERE s.loginid = l.loginid AND s.submissionid = c.submissionid GROUP BY s.loginid, s.submissionid s.title, s.url, s.displayurl, l.username ORDER BY s.datesubmitted DESC LIMIT 10"; $result = mysql_query($sqlStr); $arr = array(); echo "<table class=\"samplesrec\">"; while ($row = mysql_fetch_array($result)) { echo '<tr>'; echo '<td class="sitename1"><a href="http://www.'.$row["url"].'">'.$row["title"].'</a></td>'; echo '</tr>'; echo '<tr>'; echo '<td class="sitename2"><a href="http://www...com/sandbox/members/index.php?profile='.$row["username"].'">'.$row["username"].'</a><a href="http://www...com/sandbox/comments/index.php?submission='.$row["title"].'">'.$row["countComments"].'</a></td>'; echo '</tr>'; } echo "</table>";

    Read the article

  • Using Facebook Login to create a user?

    - by andbeyond
    I've read this SO post which led me to this FB policy page, which seemed to include some pertinent information, but I'd like more of a community response, maybe some experienced FB API people who know the limits. My question is if I can use Facebook's Login api to, essentially, create a new user on my website. I really would just like to allow users to easily "transfer" some data from FB in order to more easily create a new account on my site. I realize, first and foremost, that I would obviously announce to the user that by click "submit" in the form, that they are creating a separate account on my site. Pertinent blocks on the policy page state: You may cache data you receive through use of the Facebook API in order to improve your application’s user experience, but you should try to keep the data up to date. This permission does not give you any rights to such data. Which doesn't look good for me, but also this: If you stop using Platform or we disable your application, you must delete all data you have received through use of the Facebook API unless: (a) it is basic account information; or (b) you have received explicit consent from the user to retain their data. Which, in my case, I would be satisfying part B. I would be asking the user's permission to retain the data, as I am simply using Facebook as a conveience to the user when creating an account. I also realize that Facebook has a registration API, but this would require a Facebook styled login form, along with my own sites login form, and I'd rather one interface, as this makes it easier for me on the front and back end. Any thoughts?

    Read the article

  • binding nested json object value to a form field

    - by Jack
    I am building a dynamic form to edit data in a json object. First, if something like this exists let me know. I would rather not build it but I have searched many times for a tool and have found only tree like structures that require entering quotes. I would be happy to treat all values as strings. This edit functionality is for end users so it needs to be easy an not intimidating. So far I have code that generates nested tables to represent a json object. For each value I display a form field. I would like to bind the form field to the associated nested json value. If I could store a reference to the json value I would build an array of references to each value in a json object tree. I have not found a way to do that with javascript. My last resort approach will be to traverse the table after edits are made. I would rather have dynamic updates but a single submit would be better than nothing. Any ideas? // the json in files nests only a few levels. Here is the format of a simple case, { "researcherid_id":{ "id_key":"researcherid_id", "description":"Use to retrieve bibliometric data", "url_template" :[ { "name": "Author Detail", "url": "http://www.researcherid.com/rid/${key}" } ] } } $.get('file.json',make_json_form); function make_json_form(response) { dataset = $.secureEvalJSON(response); // iterate through the object and generate form field for string values. } // Then after the form is edited I want to display the raw updated json (then I want to save it but that is for another thread) // now I iterate through the form and construct the json object // I would rather have the dataset object var updated on focus out after each edit. function show_json(form_id){ var r = {}; var el = document.getElementById(form_id); table_to_json(r,el,null); $('body').html(formattedJSON(r)); }

    Read the article

  • Forward slash problem in xsl and xsql

    - by Peter Kaleta
    Hi I have simple xsql <?xml version="1.0" encoding="utf-8"?> <?xml-stylesheet type="text/xsl" href="zad1.xsl" ?> <page xmlns:xsql="urn:oracle-xsql" connection="java:comp/env/jdbc/mondialDS"> <xsql:query max-rows="-1" null-indicator="no" tag-case="lower" rowset-element="continents"> select name as continent from mondial_user.Continent order by 1 </xsql:query> </page> which gives me a list of continents with "australia/oceania" among them i use XSL on above xsql : <?xml version="1.0" encoding="UTF-8" ?> <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"> <!-- Root template --> <res> <xsl:template match="/continents"> <xsl:for-each select="row"> <re> <xsl:value-of select="continent"/> </re> </xsl:for-each> </xsl:template> </res> </xsl:stylesheet> Firefox throws an error on "wrong formated xml document" with: AfricaAmericaAsiaAustralia/OceaniaEurope -----------------------------------^ Help appreciated.

    Read the article

  • XML: what processing rules apply for values intertwined with tags?

    - by iCE-9
    I've started working on a simple XML pull-parser, and as I've just defuzzed my mind on what's correct syntax in XML with regards to certain characters/sequences, ignorable whitespace and such (thank you, http://www.w3schools.com/xml/xml_elements.asp), I realized that I still don't know squat about what can be sketched up as the following case (which Validome finds well-formed very much; note that I only want to use xml files for data storage, no entities, DTD or Schemas needed): <bookstore> <book id="1"> <author>Kurt Vonnegut Jr.</author> <title>Slapstick</title> </book> We drop a pie here. <book id="2">Who cares anyway? <author>Stephen King</author> <title>The Green Mile</title> </book> And another one here. <book id="3"> <author>Next one</author> <title>This time with its own title</title> </book> </bookstore> "We drop a pie here." and "And another one here." are values of the 'bookstore' element. "Who cares anyway?" is a value related to the second 'book' element. How are these processed, if at all? Will "We drop a pie here." and "Another one here." be concatenated to form one value for the 'bookstore' element, or are they treated separately, stored somewhere, affecting the outcome of the parsing of the element they belong to, or...?

    Read the article

  • Null reference exception While Navigating to PlayListItem.

    - by Subhen
    Hi, I am trying to play the selected media from PlayList,if the selected index is not zero as below: if (playList.Items.Count == 0) { setPlayList(); if (selectedIndex!= 0) { if(custMediaElement.Playlist!=null) custMediaElement.GoToPlaylistItem(selectedIndex); } } The setPlayLIst method is as below: private void setPlayList() { IEnumerable eLevelData = pMainPage.GetDataFromDictonary(pMainPage.strChildFolderID); foreach (RMSMedia folderItems in eLevelData) { string strmediaURL = folderItems.strMediaFileName; string strmediaExtension = GetExtension(strmediaURL); if (strmediaExtension == "wmv" || strmediaExtension == "mp4" || strmediaExtension == "mp3" || strmediaExtension == "mpg") { PlaylistItem playListItem = new PlaylistItem(); string thumbSource = folderItems.strAlbumcoverImage; playListItem.MediaSource = new Uri(strmediaURL, UriKind.RelativeOrAbsolute); playListItem.Title = folderItems.strAlbumName; if (!string.IsNullOrEmpty(thumbSource)) playListItem.ThumbSource = new Uri(thumbSource, UriKind.RelativeOrAbsolute); playList.Items.Add(playListItem); } } custMediaElement.Playlist = playList; } But I am getting a Null reference Exception while trying to go to PlayList Item with the help of selected index , as explained in top. This works fine if I don't use custMediaElement.GoToPlaylistItem(selectedIndex); but in that case the Media Player Always plays the 1st Item , No matter , Which ever Song I select from the List Box. Below is few details from Stack Trace: ExpressionMediaPlayer.MediaPlayer.DoOpenPlaylistItem(PlaylistItem playlistItem) at ExpressionMediaPlayer.MediaPlayer.GoToPlaylistItem(Int32 playlistItemIndex) Thanks, Subhen

    Read the article

< Previous Page | 707 708 709 710 711 712 713 714 715 716 717 718  | Next Page >