Search Results

Search found 35296 results on 1412 pages for '12 10'.

Page 72/1412 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• Path of md device wrong after reboot

  - by flammi88

  I have to set up a software raid (level1) on a Ubuntu server 12.04. It should serve files in the network via Samba. The server has the following disks: 250gb Sata hdd (Ubuntu is installed on that drive) 2 TB Sata hdd (first disk in raid array, data disk) 2 TB Sata hdd (second data disk) I created one partition on every data disk with the type Linux raid autodetect. In the second step I created the raid1 with the following command: mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sdb1 /dev/sdc1 After that, I added the array to the mdconf: mdadm --examine --scan >> /etc/mdadm/mdadm.conf The problem is: After a reboot the array is not available on the path /dev/md0. Instead of that it gets reassembled as /dev/md/0 but it is not very reliable. Has anybody a solution for this issue?

  Read the article

• DNS configuration issues. Clients inside network unable to resolve DNS server's name

  - by hydroparadise

  Setup the DNS service on Ubuntu 12.04 64 and all apears to be well except that my dhcp clients do not recognize my DNS servers hostname. When doing a nslookup on one of my Windows clients, I get C:\Users\chad>nslookup Default Server: UnKnown Address: 192.168.1.2 Where I would expect the FQDN in the spot where UnKnown is seen. The DNS server know's itself pretty well, but I think only because I have an entry in the /etc/hosts file to resolve. There's so many places to look I don't even know where to begin. Are there any logs I can look at? Something. Places I've looked at and configured: /etc/bind/zones/domain.com.db /etc/bind/zones/rev.1.168.192.in-addr.arpa /etc/bind/named.conf.local EDIT: '/etc/bind/zones/rev.1.168.192.in-addr.arpa' @ IN SOA dns-serv1.mydomain.com [email protected]. ( 2006081401; 28800; 604800; 604800; 86400 ) IN NS dns-serv1.mydomain.com. 2 IN PTR dns-serv1 2 IN PTR mydomain.com EDIT 2: '/etc/bind/named.conf.local' zone "mydomain.com" { type master; file "/etc/bind/zones/mydomain.com.db"; }; zone "1.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/rev.0.168.192.in-addr.arpa"; };

  Read the article

• nginx starts up before apache

  - by paullb

  I've been fumbling through setting up redmine on a unbuntu (12.04) box and somewhere along the line NginX got set up and now apache no longer loads because nginx has already grabbed the port. I tried removing NginX with the below command but that didn't seem to make any difference. When I restarted the server and pointed my web browser I still got the "Welcome to NginX" message sudo apt-get purge nginx I have confirmed that NginX is gone because when I run the above now I get as an output Package nginx is not installed, so not removed Yet everytime I start the machine it is running again. I noticed the following for the running processes (if that is helpful) root 923 0.0 0.0 76784 1280 ? Ss 03:00 0:00 nginx: master process /usr/sbin/nginx www-data 925 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 926 0.0 0.1 77092 2204 ? S 03:00 0:00 nginx: worker process www-data 927 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process www-data 928 0.0 0.0 77092 1704 ? S 03:00 0:00 nginx: worker process Any advice for bringing back apache2 as the "default" (for lack of a better term) web server?

  Read the article

• Black screen on Ubuntu 12.04

  - by user1648371

  I've just upgraded to Ubuntu 12.04 and I'm experiencing some problems. The first thing I noticed is that when I click the Workspace switcher all I get is a black screen (I can guess where the different workspaces are located and clicked on them, not a practical solution though). In addition when I lock the screen or suspend the laptop (a Vaio VPCEB4M1E) I get a shifted screen (I see the right most vertical stripe on the left size of the monitor and nothing about all the rest, to put it clearly I can see the gear that allows me to turn the pc off, etc, but not much more..) when I go to the additional driver menu I see the "ATI/AMD proprietary FGLRX graphics driver" are installed and the post-release update version is available. I don't know if the problem is driver related, so before doing anything I'd like to get some suggestions from you guys. Thanks you!

  Read the article

• "No version information available" - After installing Postgres

  - by intellidiot

  I have installed Postgres 9.1.4 on an Ubuntu 12.04 (precise) 64-bit from here http://www.openscg.com/se/postgresql/packages.jsp, but right after installing many commands (programs) are throwing these following warnings in different combinations: /opt/postgres/9.1/lib/libxml2.so.2: no version information available /opt/postgres/9.1/lib/libcrypto.so.1.0.0: no version information available /opt/postgres/9.1/lib/libssl.so.1.0.0: no version information available Though this is not restricting anything, this is often getting very annoying. Is there a way to get rid of this without uninstalling Postgres?

  Read the article

• Wireless networking on Gnome on Ubuntu 9 / 10

  - by WaveyDavey

  So here's my problem: I have some netbooks (ASUS eee, and ACER Aspire Ones) that I've been tasked to set up as kiosk machines, locked up tight for normal users. I am a command-line, server man, so this gnome malarkey is all a bit new to me. I found a lovely 9.04 kiosk livecd that installs and runs exactly as I want it to, but I can't get the wireless working. So I dropped on a full 10.4 distro, and wireless works straight out of the box (so hardware is good) - all I needed to do was right-click on the network connection icon, enter my SSID and password (WPA/WPA2) and away it went, perfect. Further investigation on 10.4 distro shows that /etc/networking/interfaces is virtually empty (just auto lo iface lo inet loopback in it), even after I have set up the wireless thru the gnome taskbar applet (is that the right word?). So where does gnome / ubuntu store the network settings to bring the blasted wireless connection up, and what do I need to do on the kiosk version to get wireless running?

  Read the article

• Horde complains that Imp is not running

  - by Eric J.

  I'm a mostly-Windows guy tasked with setting up email on an Ubuntu 12.04 instance at AWS and hit the following error: When I browse to Horde, after entering my administrative credentials, I get the error message: A fatal error has occurred imp is not activated. Details have been logged for the administrator. I am following the following, quite detailed guide http://www.exratione.com/2012/05/a-mailserver-on-ubuntu-1204-postfix-dovecot-mysql/ This is happening at Step 20, at the text Now fire up you web browser and navigate to your server at http://mail.example.com/ to verify that you can log in as the configured administrative mail user. (of course I used my actual domain). Questions Where is Horde logging the "details"? Any thoughts on why this might happen? I found Google hits suggesting that php5-mcrypt might be missing, but I verified it is installed and up-to-date in my case.

  Read the article

• Creating mdraid device on top of other existing mdraid devices

  - by Dmitriusan

  I'm considering creating something like "hierarchical raid" and wondering whether it is possible using pure mdraid. Moreover, I'm going to boot from this device. I'm using Ubuntu Server 12.04 LTS with Grub2 bootloader. Motivation behind doing that is: I have 4 x 1tb 7200rpm disks. Two are newer and faster (up to 200mb/sec) and other two are slower (up to 140mb/sec). I want to create RAID-0 device from them. When creating such RAID-0 directly from 4 hard disks, I get summary speed up to ~480mb/sec. That is roughly 4*120mb/sec, so RAID-0 works with speed of the slowest device. I have an idea to create a separate RAID-0 md0 device from 500gb partitions of slower hard disks. Theoretically, this md0 device will have speed 2*140=240~280mb/sec. After that, I'm going to add this md0 device to RAID-0 with faster disks, finishing with up to 3*200=600mb/sec. Stripe-width for this raid will be 2x times bigger than for underlying raid with slow disks. Questions are: is it possible or I'm missing something? will that work as expected? can I boot from such consolidated raid device? any better ideas? any pitfalls? I don't want to use fakeraid for consolidating slow disks for multiple reasons (portability, ability to customize parameters and so on). PS Speed is needed for home virtualization server and just for experience/fun. Reliability is provided via regular automatic backups to a separate device. PPS I considered also using different stripe-width for hard disks with different speed in single raid, but mdraid does not seem to support that.

  Read the article

• Route forwarded traffic through eth0 but local traffic through tun0

  - by Ross Patterson

  I have a Ubuntu 12.04/Zentyal 2.3 server configured with WAN NATed on eth0, local interfaces eth1 and wlan0 bridged on br1 on which DHCP runs, and an OpenVPN connection on tun0. I only need the VPN for some things running on the gateway itself and I need to make sure that everything running on the gateway goes through the VPNs tun0. root:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default gw... 0.0.0.0 UG 100 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 br1 192.168.1.0 * 255.255.255.0 U 0 0 0 br1 A.B.C.0 * 255.255.255.0 U 0 0 0 eth0 root:~# ip route 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.186 root:~# ip route show table main 169.254.0.0/16 dev br1 scope link metric 1000 192.168.1.0/24 dev br1 proto kernel scope link src 192.168.1.1 A.B.C.0/24 dev eth0 proto kernel scope link src A.B.C.D root:~# ip route show table default default via A.B.C.1 dev eth0 How can I configure routing (or otherwise) such that all forwarded traffic for other hosts on the LAN goes through eth0 but all traffic for the gateway itself goes through the VPN on tun0? Also, since the OpenVPN client changes routing on startup/shutdown, how can I make sure that everything running on the gateway itself loses all network access if the VPN goes down and never goes out eth0.

  Read the article

• Cannot connect on TFS 2012 server through SSL with invalid certificate

  - by DaveWut

  I saw the problem on some forums and even here, but not as specific as mine. So here's the thing, So I've configured a TFS 2012 server, on one of my personnel server at home, and now, I'm trying to make it available through the internet, with the help of apache2 on a different UNIX based, physical server. The thing is working perfectly, I don't have any problem accessing the address https://tfs.something.com/tfs through my browser. The address can be pinged and I do have access to the TFS control panel through it. How does it work? Well, with apache2 you can set a virtual host and set up the ProxyPass and ProxyPassReserver setting, so the traffic can externally comes from a secure SSL connection, through a specified domain or sub-domain, but it can be locally redirect on a clear http session on a different port. This is my current setup. As I already said, I can access the web interface, but when I'm trying to connect with Visual Studio 2012, it can't be done. Here's the error I receive: http://i.imgur.com/TLQIn.png The technical information tells me: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. My SSL certificate is invalid and was automatically generated on my UNIX server. Even if I try to add it in the Trusted Root Certification Authorities either on my TFS server or on my local workstation, it doesn't work. I still receive the same error. Is there's a way to completely ignore certificate validation? If not, what's have I done? I mean, I've added the certificate in the trusted root certificates, it should works as mentioned on some forums... If you need more information, please ask me, I'll be pleased to provide you more. Dave

  Read the article

• Repair GRUB bootloader for multiboot system

  - by user1715324

  I have two hard disks – one a 1TB and the other a 250 GB. I installed the OSes in the following order: Windows 7 on the first hard disk (1 TB) After that Kubuntu 12.04 on a partition (/dev/sdb7) on the second hard disk (250 GB) The second drive also contains an NTFS partition. Now, kubuntu's bootloader was installed on the second hard drive's MBR (and successfully detected Windows 7). So, whenever I wanted to load Windows I used to select the first hard disk from the BIOS boot menu and the second hard disk whenever I wanted to load kubuntu. I know I could have set the second hard disk as the default drive, still I prefered this method. The problem started when I installed Linux Mint 13 on the second hard disk (/dev/sdb3) and overwrote kubuntu's original MBR. Now, the GRUB just detects Mint and Windows. The MBR on the 1 TB hard disk is untouched. Is there a way I can modify the MBR on the second hard disk now so that it will show kubuntu and Mint both?

  Read the article

• AWS EC2 can't execute user-data script

  - by Bloodnut

  I'm pretty new to AWS and EC2 but I want to run instances with a user script after it's booted from another instance. I have installed ec2 tools and ran the command as it's explained in various examples like here http://www.turnkeylinux.org/blog/ec2-userdata and Eric Hammond's tutorials. however when I actually use the command: "ec2-run-instances --key my-key --user-data-file myscript my-ami" it only runs the new instance but doesn't execute the script myscript contains: #!/bin/bash echo "hello" ~/output.txt I'm running ubuntu server 12.04 AMIs. the target AMIs are duplicates of the initiating instance. if I run curl http:// 169.254.169.254/latest/user-data the imported script is there.

  Read the article

• Change XRDP keyboard layout to en-gb Ubuntu 12.04

  - by Earl Sven

  Does anybody know how to change the keyboard layout to en-gb in an XRDP session on Ubuntu 12.04? I am using mstsc.exe to connect to an XRDP server hosting an XVNC session, however I cannot work out how to apply the UK keyboard layout. A bit of googling has yeilded these instructions which allow me to change the keymap, however using the keymap file I downloaded from here I loose the ability to use the arrow keys, home/end etc. Comparing the file with the standard one there are substantially more differences than I would expect considering the similarity between the layouts. I only have RDP access to the box so i don't seem to be able to actually generate a new layout per the instructions above, maybe it's a local console thing? Also I can't change either the RDP client used or the RDP server as they are my only access to the system, I don't have local console access. I do have root priveleges on the OS however. Any thoughts? Edit: I have found http:// xrdp.sourceforge.net/documents/keymap/newkeymap.html (apologies for not typing the link properly but the antispam filter won't let me post more than 2 links) this documentation on the XRDP sourceforge page which describes keymap file format. It indicates the values in the keymap files are unicode 0x64 etc, however the files I have already on my system seem to use a different format 0:0 or 65307:27 etc, does anybody know what the difference is?

  Read the article

• Ubuntu Server 12.04 LTS on Hyper-V 2012

  - by user137533

  I have the following scenario: Hyper-V 2012 server core installation. On top of this i created a virtual machine on which i tried installing Ubuntu Server 12.04 which should not have any compatibility issues according to what Microsoft and Ubuntu are saying (although it is not officially supported). I start, run the installation and everything is ok, no problems detecting the network device or the hard drive (unlike debian which didn't even detect the hard drive). Once the installation is complete it asks me to reboot, it unmounts the "dvd drive" and reboots. Once it tries to start again i get the following error: Boot failure. Reboot and Select proper Boot device or Insert Boot Media in the selected Boot device. It seems to not be booting up from the virtual hard drive. The hard drive is set up in SCSI mode, nothing mounted on the IDE controller (no iso image or anything else. Does anyone have any ideas on what i can do to solve this?

  Read the article

• Wireless not working on ubuntu 12.04

  - by Yosef

  I just install ubuntu 12.04 but wirelless not works(windows 7 wirelless works). I open my windows 7 and see under Network Adapters: Edimax 802.11n Wireless Adapter Realtek PCIe GBE Family Controller Which drivers i should download to install them on ubuntu 12.04 to make wireless work? And how i install this drivers on ubuntu after i copy them to usb. (I can have only wireless connection not wire - soo i nhave to dowload the drivers with windows then copy them to ubuntu) Thanks

  Read the article

• How to prevent Ubuntu from combining networks on 2 NIC server?

  - by SolarPower

  I've got a Ubuntu Server 10.10 with 2 network interfaces with a cable plugged into both going to switches on completely different networks with different routers. One network is the 10.1.10.X network with a separate gateway/router - the server has an IP of 10.1.10.50 with the gateway IP of 10.1.10.1. The other interface is 10.2.10.X, IP 10.2.10.50, gateway 10.2.10.1. All my Mac machines are on the 10.2.10.X network, and all servers on the 10.1.10.X. The ONLY connection between the two is this machine. From a Mac in my office, I CANNOT ping any computer on the 10.1.10.X network except the Ubuntu machine I'm talking about. However, under the Shared column in Finder, I can see every server on the other network listed. That makes me believe that somehow this Ubuntu machine is letting certain requests span both networks, which is a security problem. Hope this is enough info.

  Read the article

• Website running on Tomcat port 8443 will only resolve with IP address, not dns

  - by littleK

  I recently set up a web server running tomcat 7 on Ubuntu 12.04. It is currently running on port 8080, however I just enabled SSL on port 8443. Here's my problem: For port 8080, the website is resolved with DNS: (http://www.mywebpage.com:8080) For port 8443, I can only access the website with the IP Address (http://0.0.0.0:8443). It will not work if I use the DNS name. I ultimately want to disable port 80 and use port 8443 only. Does anyone know why I cannot resolve the website on port 8443 using DNS, and how I might fix it? Thanks!

  Read the article

• Migrating to new dovecot server; Dovecot fails to authenticate using old password database

  - by Ironlenny

  I am migrating my companies intranet from a OS X server to an Ubuntu 12.04 server. We use a flat file to store user names and passwords hashs. This file is used by Apache and Dovecot to authenticate users. The Ubuntu server is running Dovecot 2.0 while the OS X server is running Dovecot 1.2. I have already migrated WebDav which uses Apache for authentication. Authentication works. I'm in the process of migrating our Prosody server which uses Dovecot for authentiation. Dovecot is up and running, but when I test authentication using either telnet a login username password or doveadm sudo doveadm auth username, I get dovecot: auth: passwd-file(username): unknown user dovecot: auth: Debug: client out: FAIL#0111#011user=username in my log file. I can use sudo dovecot user username to perform a user lookup and it will return the user's info. I can generate a password hash locally and Dovecot will authenticate the test password just fine.

  Read the article

• ubuntu 12.04 copy whole server

  - by Jiechao Li

  all. My company host all the software, including application and website in one local ubuntu server. But recently we start to use Amazon EC2, and want to move the whole server to cloud. Is there anyway to copy the entire server to EC2? OS is the same, ubuntu 12.04, and just one server, and one user account. On EC2 is also one instance, one account. I don't know whether there is a simple and quick way to do that. Thanks a lot!!

  Read the article

• KVM machine does not start ssh, network is started, used to work

  - by lleto

  have been searching an pulling my hear out for the last 6 hours. I have a virtual machine that has been running fine for the last six months. I was happy ssh'ing into it and it was running a database and some small apps. Tonight ssh stopped working, so I decided to reboot the machine. I now have the following situation: virsh list --all states machine as running I can ping the machine and get a reply When I ssh to the machine I see "ssh: connect to host [myserver] port 22: Connection refused" nmap does not show port 22 as open I have tried to: - reboot the machine once more (no luck) - mount the filesystem and check /etc/ssh/sshd.conf (has not changed since working situation) - install virsh console, however this does not seem to work When I mount the fs directly using losetup the strange thing is that file dates seem to be frozen in /var/log/ around the time of the crash. If I look in /var/run/ I can see an sshd.pid, but the time is 6 hours ago (and numerous reboots). My virsh xml looks like this: <domain type='kvm' id='21'> <name>myserver</name> <uuid>09678c8d-a99b-1d18-a7af-88d027cc8f93</uuid> <memory>1048576</memory> <currentMemory>1048576</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='pc-1.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>destroy</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/dev/disk01/myserver'/> <target dev='hda' bus='ide'/> <alias name='ide0-0-0'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <controller type='ide' index='0'> <alias name='ide0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:e3:13:86'/> <source bridge='br0'/> <target dev='vnet0'/> <model type='virtio'/> <alias name='net0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <serial type='pty'> <source path='/dev/pts/1'/> <target port='0'/> <alias name='serial0'/> </serial> <console type='pty' tty='/dev/pts/1'> <source path='/dev/pts/1'/> <target type='serial' port='0'/> <alias name='serial0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='5900' autoport='yes' listen='127.0.0.1'> <listen type='address' address='127.0.0.1'/> </graphics> <video> <model type='cirrus' vram='9216' heads='1'/> <alias name='video0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </video> <memballoon model='virtio'> <alias name='balloon0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x04' function='0x0'/> </memballoon> </devices> <seclabel type='dynamic' model='apparmor' relabel='yes'> <label>libvirt-09678c8d-a99b-1d18-a7af-88d027cc8f93</label> <imagelabel>libvirt-09678c8d-a99b-1d18-a7af-88d027cc8f93</imagelabel> </seclabel> </domain> I'm sort of lost as to where I can look to get the machine up and running again. On the same instance of kvm I have another server running which is working fine. Both are Ubuntu 12.04. All help is welcome....

  Read the article

• Ubuntu Crontab error

  - by user34104

  pedro@Pedro-PC:~/PL/trab4$ crontab -l 01 12 * * * ls -l i want to list files at 12h01 with crontab,how?

  Read the article

• Getting Grub2 to recognize a Raid 10 boot/root

  - by xenoterracide

  I've been trying to get my raid to boot from grub2 for about 2 days now and I don't seem to be getting closer. The problem appears to be that it doesn't recognize my raid at all. It doesn't see (md0) etc. I'm not sure Why or how to change this. I'm using mdadm, 2 device (essentially a raid1) raid10,f2, which is currently degraded. I have tried adding the raid and mdraid modules with grub install along with others. I've tried several variation on grub-install such as grub-install --debug --no-floppy --modules="biosdisk part_msdos chain raid mdraid ext2 linux search ata normal" /dev/md0 I've been searching the net for an answer to what I haven't done but no luck. On my other drive which I plan on removing the raid is initialized and mounted fine on boot, but it's not the boot/root for that setup. My grub.cfg isn't recognized by grub since it can't read the raid partition so I'm not posting that. md0 is not listed in my /boot/grub/device.map.

  Read the article

• Magic Mouse problems dragging and dropping files in finder (Mac OSX 10.6.3)

  - by Brendan Green

  I have an issue dragging files around in the finder with my Magic Mouse. For example, I was trying to select and drag multiple files from the desktop onto an external hard drive. However, whenever I do so, the files either end up deselected (and the move doesn't happen). If I try to drag a single file, finder ends up doing whatever it does to enable the file to be renamed. Reverting back to the touchpad works fine. Is there a problem with drag-and-drop with this mouse, or is there a setting that I am missing (I've scoured the settings, and nothing is jumping out at me). Any help would be appreciated. Thanks

  Read the article

• What to do before connecting Ubuntu Server to the internet for the first time?

  - by CodeMonkey

  I just finished installing Ubuntu Server 12.10 on an Asus Eee PC 1000H (to be used as a home server/sandbox) from USB. I installed this software during installation: OpenSSH server LAMP server Samba file server Virtual Machine host I won't use 2, 3 or 4 for a while though. Can/should I turn these off somehow? I have turned home directory encryption on. Security updates are installed automatically. I have chosen a strong password for the single user. I have never plugged in the internet cable so far. Before doing so I'd like to ask: What can/should I do/install to increase security before connecting to the internet? Firewall? Fail2ban? Users/Passwords? Encryption? Enable/Disable functionality? etc. I'm sorry if you get this question a lot. I've searched around quite a while, but it still feels like I might overlook something important.

  Read the article

• Graphics and USB devices freezing soon after OS loads

  - by Andrew

  I run Ubuntu/Windows dual boot. Last night I started the upgrade to Ubuntu 12.04, and my computer has not worked since in either Windows or Ubuntu. Here's what I got when I rebooted after the upgrade, and continue to get every time I boot: Gets to GRUB screen OK. Choose Ubuntu - black screen or crazy purple lines. At first I assumed something went wrong with the upgrade (often happens). Choose Windows - works fine, I log in, but soon after that the graphics freeze (sometimes with purple artifacts). The keyboard and mouse (both USB) also lose power at the same instant, and none of the USB ports have power to them. This happens sooner or later every time I boot. Update: the HDD also appears to lose power at the same point. I have tried a live CD, but my computer refuses to boot any CD even after disabling all other boot options in the BIOS. I have disconnected everything except keyboard, mouse, graphics card with one monitor, one RAM sick and HDD; no change. I also took the little battery out to reset CMOS. I am pretty sure no matter how wrong the Ubuntu upgrade went, it wouldn't cause the above symptoms in Windows. So the only explanation I can think of is that a hardware failure occurred at the same time. Some possible causes of this I can think of are: A couple of days before this, I added a third screen (which worked fine). About a week before, my house lost power in a storm (no ill effects over the past few days though). What can I do, other than buy a new motherboard/CPU and hope it works? Unfortunately I don't have another box to swap parts into to test at the moment.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >