Search Results

Search found 5904 results on 237 pages for 'hybrid storage'.

Page 72/237 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• ESX3.5 Cluster & MD3000i -- Both servers see iSCSI Targets, Only one server can use partition.

  - by GruffTech

  Alright. First and foremost, Warning. This is a bigger-then-normal question. I like to be thorough and try to eliminate all possible "easymode" answers, as well as give everyone a feel of what i've tried. I've included several images of our setup and the problem it is having.. TLDR Version: So I've followed the guides located here: ESX Deployment Guide V1 this is the guide Dell has sent me to setup two ESX3.5 servers mounting a Dell MD3000i. It doesn't work. Both servers can't use the same storage partition on the MD3000. Both servers see it, but only one server can actually use it. (that server being whatever server created the partition on the target.) Both ESX servers are members of the Host Group. Full Version I have 2 ESX3.5 Servers (10.0.7.102, also called EPI2, and 10.0.7.103, also called EPI3.) connected to a iSCSI SAN Device (Dell MD3000i). Both ESX servers can "scan" the SAN and see the LUNS. Part One: MD3000i Storage On the MD3000i, Both servers are in my host group. I have two partitions, VM1 and VM2, both 1.6TB (vmware doesn't like anything past 2tb.) And you can even see that the ESX servers are targetting the MD3000 just fine. Part Two: The ESX Servers Figure 1. So as you can see above, Both ESX Servers (10.0.7.102 and 10.0.7.103) are able to see and scan the MD3000i SAN. Figure 2. Above is the storage both servers see. I created the storage partition on EPI2 (102). I then Extended the partition to include the second LUN for a grand total of 3.27 TB of storage. When i "rescan" on 103 (the server not mounting the partition), I get the below log in log/messages. Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). being the only line that grabs my attentions. (EPI3 is the server name) Mar 11 10:41:04 epi3 vmkiscsid[5436]: Connected to Discovery Address 192.168.130.101 Mar 11 10:41:04 epi3 vmkiscsid[5437]: Connected to Discovery Address 192.168.130.102 Mar 11 10:41:04 epi3 vmkiscsid[5438]: Connected to Discovery Address 192.168.131.101 Mar 11 10:41:04 epi3 vmkiscsid[5439]: Connected to Discovery Address 192.168.131.102 Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 0 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdb : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Device id info for sdb: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0xa2 0x0 0x0 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:17 epi3 kernel: VMWARE SCSI Id: Id for sdb 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0xa2 0x00 0x00 0x15 0xe2 0x4d 0x75 0xf6 0x99 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:17 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0 Mar 11 10:41:17 epi3 kernel: scan_scsis starting finish Mar 11 10:41:17 epi3 kernel: SCSI device sdb: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:17 epi3 kernel: sdb: sdb1 Mar 11 10:41:17 epi3 kernel: scan_scsis done with finish Mar 11 10:41:17 epi3 kernel: scsi singledevice 2 0 0 1 Mar 11 10:41:17 epi3 kernel: Vendor: DELL Model: MD3000i Rev: 0735 Mar 11 10:41:17 epi3 kernel: Type: Direct-Access ANSI SCSI revision: 05 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Supported VPD pages for sdc : 0x0 0x80 0x83 0x85 0x86 0x87 0xc0 0xc1 0xc2 0xc3 0xc4 0xc8 0xc9 0xca 0xd0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Device id info for sdc: 0x1 0x3 0x0 0x10 0x60 0x1 0xe4 0xf0 0x0 0x1a 0x1a 0x86 0x0 0x0 0xd 0xb7 0x4d 0x75 0xf2 0x77 0x53 0x98 0x0 0x54 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x2c 0x74 0x2c 0x30 0x78 0x30 0x30 0x30 0x31 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x32 0x0 0x0 0x0 0x51 0x94 0x0 0x4 0x0 0x0 0x80 0x1 0x53 0xa8 0x0 0x44 0x69 0x71 0x6e 0x2e 0x31 0x39 0x38 0x34 0x2d 0x30 0x35 0x2e 0x63 0x6f 0x6d 0x2e 0x64 0x65 0x6c 0x6c 0x3a 0x70 0x6f 0x77 0x65 0x72 0x76 0x61 0x75 0x6c 0x74 0x2e 0x36 0x30 0x30 0x31 0x65 0x34 0x66 0x30 0x30 0x30 0x31 0x61 0x31 0x61 0x61 0x32 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x30 0x34 0x37 0x39 0x30 0x36 0x32 0x32 0x65 0x0 0x0 0x0 0x0 Mar 11 10:41:18 epi3 kernel: VMWARE SCSI Id: Id for sdc 0x60 0x01 0xe4 0xf0 0x00 0x1a 0x1a 0x86 0x00 0x00 0x0d 0xb7 0x4d 0x75 0xf2 0x77 0x4d 0x44 0x33 0x30 0x30 0x30 Mar 11 10:41:18 epi3 kernel: VMWARE: Unique Device attached as scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: Attached scsi disk sdc at scsi2, channel 0, id 0, lun 1 Mar 11 10:41:18 epi3 kernel: scan_scsis starting finish Mar 11 10:41:18 epi3 kernel: SCSI device sdc: 3509329920 512-byte hdwr sectors (1797751 MB) Mar 11 10:41:18 epi3 kernel: sdc: sdc1 Mar 11 10:41:18 epi3 kernel: scan_scsis done with finish Mar 11 10:41:18 epi3 kernel: scsi1: remove-single-device 0 0 0 failed, device busy(4). Mar 11 10:41:18 epi3 kernel: scsi singledevice 1 0 0 0 Things I've Tried: Removing iSCSI targets from only 103, disabling iSCSI, rebooting, enabled iSCSI, re-adding targets, rescan. Same result. Removing partition on 102, Formatted partition on 103 instead. Same result, except flipped. 103 can use storage, 102 can not. Starting Over. Removing all iSCSI Targets on both ESX Boxes, disabling iSCSI, turning off the firewall for iSCSI, rebooting ESX. Then on the MD3000, Removed the Host Group, Removed the Host-to-Virtual Mappings, Restarted the SAN. Followed the Documentation again, same result. Both servers see the storage, but only one server can use it. Disabling and Re-enabling VMware DRS and HA. Same result. Flat-out turning off VMware DRS and HA, and doing the "start over" step to see if maybe that borked it. Same Result. I'm kinda loosing my mind here, Everything i read online says "just partition it and if the ESX boxes can see the targets, it just works".... well crap. Any ideas, any other things to try? Can anyone atleast point me in the right direction? I'm really tired of working from 1am til 4am (our maintenance hours)

  Read the article

• Installing vim7.2 on Solaris Sparc 10 as non-root

  - by Tobbe

  I'm trying to install vim to $HOME/bin by compiling the sources. ./configure --prefix=$home/bin seems to work, but when running make I get: > make Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make first gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -I/usr/openwin/include -o objects/buffer.o buffer.c In file included from buffer.c:28: vim.h:41: error: syntax error before ':' token In file included from os_unix.h:29, from vim.h:245, from buffer.c:28: /usr/include/sys/stat.h:251: error: syntax error before "blksize_t" /usr/include/sys/stat.h:255: error: syntax error before '}' token /usr/include/sys/stat.h:309: error: syntax error before "blksize_t" /usr/include/sys/stat.h:310: error: conflicting types for 'st_blocks' /usr/include/sys/stat.h:252: error: previous declaration of 'st_blocks' was here /usr/include/sys/stat.h:313: error: syntax error before '}' token In file included from /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:132, from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/sys/siginfo.h:259: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:292: error: syntax error before '}' token /usr/include/sys/siginfo.h:294: error: syntax error before '}' token /usr/include/sys/siginfo.h:390: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:398: error: conflicting types for '__fault' /usr/include/sys/siginfo.h:267: error: previous declaration of '__fault' was here /usr/include/sys/siginfo.h:404: error: conflicting types for '__file' /usr/include/sys/siginfo.h:273: error: previous declaration of '__file' was here /usr/include/sys/siginfo.h:420: error: conflicting types for '__prof' /usr/include/sys/siginfo.h:287: error: previous declaration of '__prof' was here /usr/include/sys/siginfo.h:424: error: conflicting types for '__rctl' /usr/include/sys/siginfo.h:291: error: previous declaration of '__rctl' was here /usr/include/sys/siginfo.h:426: error: syntax error before '}' token /usr/include/sys/siginfo.h:428: error: syntax error before '}' token /usr/include/sys/siginfo.h:432: error: syntax error before "k_siginfo_t" /usr/include/sys/siginfo.h:437: error: syntax error before '}' token In file included from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:173: error: syntax error before "siginfo_t" In file included from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/signal.h:111: error: syntax error before "siginfo_t" /usr/include/signal.h:113: error: syntax error before "siginfo_t" buffer.c: In function `buflist_new': buffer.c:1502: error: storage size of 'st' isn't known buffer.c: In function `buflist_findname': buffer.c:1989: error: storage size of 'st' isn't known buffer.c: In function `setfname': buffer.c:2578: error: storage size of 'st' isn't known buffer.c: In function `otherfile_buf': buffer.c:2836: error: storage size of 'st' isn't known buffer.c: In function `buf_setino': buffer.c:2874: error: storage size of 'st' isn't known buffer.c: In function `buf_same_ino': buffer.c:2894: error: dereferencing pointer to incomplete type buffer.c:2895: error: dereferencing pointer to incomplete type *** Error code 1 make: Fatal error: Command failed for target `objects/buffer.o' Current working directory /home/xluntor/vim72/src *** Error code 1 make: Fatal error: Command failed for target `first' How do I fix the make errors? Or is there another way to install vim as non-root? Thanks in advance EDIT: I took a look at the google groups link Sarah posted. The "Compiling Vim" page linked from there was for Linux, so the commands doesn't even work on Solars. But it did hint at logging the output of ./configure to a file, so I did that. Here it is: ./configure output removed. New version further down. Does anyone spot anything critical missing? EDIT 2: So I downloaded the vim package from sunfreeware. I couldn't just install it, since I don't have root privileges, but I was able to extract the package file. This was the file structure in it: `-- SMCvim `-- reloc |-- bin |-- doc | `-- vim `-- share |-- man | `-- man1 `-- vim `-- vim72 |-- autoload | `-- xml |-- colors |-- compiler |-- doc |-- ftplugin |-- indent |-- keymap |-- lang |-- macros | |-- hanoi | |-- life | |-- maze | `-- urm |-- plugin |-- print |-- spell |-- syntax |-- tools `-- tutor I moved the three files (vim, vimtutor, xdd) in SMCvim/reloc/bin to $HOME/bin, so now I can finally run $HOME/bin/vim! But where do I put the "share" directory and its content? EDIT 3: It might also be worth noting that there already exists an install of vim on the system, but it is broken. When I try to run it I get: ld.so.1: vim: fatal: libgtk-1.2.so.0: open failed: No such file or directory "which vim" outputs /opt/local/bin/vim EDIT 4: Trying to compile this on Solaris 10. uname -a SunOS ws005-22 5.10 Generic_141414-10 sun4u sparc SUNW,SPARC-Enterprise New ./configure output: ./configure --prefix=$home/bin ac_cv_sizeof_int=8 --enable-rubyinterp configure: loading cache auto/config.cache checking whether make sets $(MAKE)... yes checking for gcc... gcc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... unsupported checking how to run the C preprocessor... gcc -E checking for grep that handles long lines and -e... /usr/sfw/bin/ggrep checking for egrep... /usr/sfw/bin/ggrep -E checking for library containing strerror... none required checking for gawk... gawk checking for strip... strip checking for ANSI C header files... yes checking for sys/wait.h that is POSIX.1 compatible... no configure: checking for buggy tools... checking for BeOS... no checking for QNX... no checking for Darwin (Mac OS X)... no checking --with-local-dir argument... Defaulting to /usr/local checking --with-vim-name argument... Defaulting to vim checking --with-ex-name argument... Defaulting to ex checking --with-view-name argument... Defaulting to view checking --with-global-runtime argument... no checking --with-modified-by argument... no checking if character set is EBCDIC... no checking --disable-selinux argument... no checking for is_selinux_enabled in -lselinux... no checking --with-features argument... Defaulting to normal checking --with-compiledby argument... no checking --disable-xsmp argument... no checking --disable-xsmp-interact argument... no checking --enable-mzschemeinterp argument... no checking --enable-perlinterp argument... no checking --enable-pythoninterp argument... no checking --enable-tclinterp argument... no checking --enable-rubyinterp argument... yes checking for ruby... /opt/sfw/bin/ruby checking Ruby version... OK checking Ruby header files... /opt/sfw/lib/ruby/1.6/sparc-solaris2.10 checking --enable-cscope argument... no checking --enable-workshop argument... no checking --disable-netbeans argument... no checking for socket in -lsocket... yes checking for gethostbyname in -lnsl... yes checking whether compiling netbeans integration is possible... no checking --enable-sniff argument... no checking --enable-multibyte argument... no checking --enable-hangulinput argument... no checking --enable-xim argument... defaulting to auto checking --enable-fontset argument... no checking for xmkmf... /usr/openwin/bin/xmkmf checking for X... libraries /usr/openwin/lib, headers /usr/openwin/include checking whether -R must be followed by a space... no checking for gethostbyname... yes checking for connect... yes checking for remove... yes checking for shmat... yes checking for IceConnectionNumber in -lICE... yes checking if X11 header files can be found... yes checking for _XdmcpAuthDoIt in -lXdmcp... no checking for IceOpenConnection in -lICE... yes checking for XpmCreatePixmapFromData in -lXpm... yes checking if X11 header files implicitly declare return values... no checking --enable-gui argument... yes/auto - automatic GUI support checking whether or not to look for GTK... yes checking whether or not to look for GTK+ 2... yes checking whether or not to look for GNOME... no checking whether or not to look for Motif... yes checking whether or not to look for Athena... yes checking whether or not to look for neXtaw... yes checking whether or not to look for Carbon... yes checking --with-gtk-prefix argument... no checking --with-gtk-exec-prefix argument... no checking --disable-gtktest argument... gtk test enabled checking for gtk-config... /opt/local/bin/gtk-config checking for pkg-config... /usr/bin/pkg-config checking for GTK - version = 2.2.0... yes; found version 2.4.9 checking X11/SM/SMlib.h usability... yes checking X11/SM/SMlib.h presence... yes checking for X11/SM/SMlib.h... yes checking X11/xpm.h usability... yes checking X11/xpm.h presence... yes checking for X11/xpm.h... yes checking X11/Sunkeysym.h usability... yes checking X11/Sunkeysym.h presence... yes checking for X11/Sunkeysym.h... yes checking for XIMText in X11/Xlib.h... yes X GUI selected; xim has been enabled checking whether toupper is broken... no checking whether __DATE__ and __TIME__ work... yes checking elf.h usability... yes checking elf.h presence... yes checking for elf.h... yes checking for main in -lelf... yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for sys/wait.h that defines union wait... no checking stdarg.h usability... yes checking stdarg.h presence... yes checking for stdarg.h... yes checking stdlib.h usability... yes checking stdlib.h presence... yes checking for stdlib.h... yes checking string.h usability... yes checking string.h presence... yes checking for string.h... yes checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking sys/utsname.h usability... yes checking sys/utsname.h presence... yes checking for sys/utsname.h... yes checking termcap.h usability... yes checking termcap.h presence... yes checking for termcap.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sgtty.h usability... yes checking sgtty.h presence... yes checking for sgtty.h... yes checking sys/ioctl.h usability... yes checking sys/ioctl.h presence... yes checking for sys/ioctl.h... yes checking sys/time.h usability... yes checking sys/time.h presence... yes checking for sys/time.h... yes checking sys/types.h usability... yes checking sys/types.h presence... yes checking for sys/types.h... yes checking termio.h usability... yes checking termio.h presence... yes checking for termio.h... yes checking iconv.h usability... yes checking iconv.h presence... yes checking for iconv.h... yes checking langinfo.h usability... yes checking langinfo.h presence... yes checking for langinfo.h... yes checking math.h usability... yes checking math.h presence... yes checking for math.h... yes checking unistd.h usability... yes checking unistd.h presence... yes checking for unistd.h... yes checking stropts.h usability... no checking stropts.h presence... yes configure: WARNING: stropts.h: present but cannot be compiled configure: WARNING: stropts.h: check for missing prerequisite headers? configure: WARNING: stropts.h: see the Autoconf documentation configure: WARNING: stropts.h: section "Present But Cannot Be Compiled" configure: WARNING: stropts.h: proceeding with the preprocessor's result configure: WARNING: stropts.h: in the future, the compiler will take precedence checking for stropts.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking sys/resource.h usability... yes checking sys/resource.h presence... yes checking for sys/resource.h... yes checking sys/systeminfo.h usability... yes checking sys/systeminfo.h presence... yes checking for sys/systeminfo.h... yes checking locale.h usability... yes checking locale.h presence... yes checking for locale.h... yes checking sys/stream.h usability... no checking sys/stream.h presence... yes configure: WARNING: sys/stream.h: present but cannot be compiled configure: WARNING: sys/stream.h: check for missing prerequisite headers? configure: WARNING: sys/stream.h: see the Autoconf documentation configure: WARNING: sys/stream.h: section "Present But Cannot Be Compiled" configure: WARNING: sys/stream.h: proceeding with the preprocessor's result configure: WARNING: sys/stream.h: in the future, the compiler will take precedence checking for sys/stream.h... yes checking termios.h usability... yes checking termios.h presence... yes checking for termios.h... yes checking libc.h usability... no checking libc.h presence... no checking for libc.h... no checking sys/statfs.h usability... yes checking sys/statfs.h presence... yes checking for sys/statfs.h... yes checking poll.h usability... yes checking poll.h presence... yes checking for poll.h... yes checking sys/poll.h usability... yes checking sys/poll.h presence... yes checking for sys/poll.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking sys/param.h usability... yes checking sys/param.h presence... yes checking for sys/param.h... yes checking libintl.h usability... yes checking libintl.h presence... yes checking for libintl.h... yes checking libgen.h usability... yes checking libgen.h presence... yes checking for libgen.h... yes checking util/debug.h usability... no checking util/debug.h presence... no checking for util/debug.h... no checking util/msg18n.h usability... no checking util/msg18n.h presence... no checking for util/msg18n.h... no checking frame.h usability... no checking frame.h presence... no checking for frame.h... no checking sys/acl.h usability... yes checking sys/acl.h presence... yes checking for sys/acl.h... yes checking sys/access.h usability... no checking sys/access.h presence... no checking for sys/access.h... no checking sys/sysctl.h usability... no checking sys/sysctl.h presence... no checking for sys/sysctl.h... no checking sys/sysinfo.h usability... yes checking sys/sysinfo.h presence... yes checking for sys/sysinfo.h... yes checking wchar.h usability... yes checking wchar.h presence... yes checking for wchar.h... yes checking wctype.h usability... yes checking wctype.h presence... yes checking for wctype.h... yes checking for sys/ptem.h... no checking for pthread_np.h... no checking strings.h usability... yes checking strings.h presence... yes checking for strings.h... yes checking if strings.h can be included after string.h... yes checking whether gcc needs -traditional... no checking for an ANSI C-conforming const... yes checking for mode_t... yes checking for off_t... yes checking for pid_t... yes checking for size_t... yes checking for uid_t in sys/types.h... yes checking whether time.h and sys/time.h may both be included... yes checking for ino_t... yes checking for dev_t... yes checking for rlim_t... yes checking for stack_t... yes checking whether stack_t has an ss_base field... no checking --with-tlib argument... empty: automatic terminal library selection checking for tgetent in -lncurses... yes checking whether we talk terminfo... yes checking what tgetent() returns for an unknown terminal... zero checking whether termcap.h contains ospeed... yes checking whether termcap.h contains UP, BC and PC... yes checking whether tputs() uses outfuntype... no checking whether sys/select.h and sys/time.h may both be included... yes checking for /dev/ptc... no checking for SVR4 ptys... yes checking for ptyranges... don't know checking default tty permissions/group... can't determine - assume ptys are world accessable world checking return type of signal handlers... void checking for struct sigcontext... no checking getcwd implementation is broken... no checking for bcmp... yes checking for fchdir... yes checking for fchown... yes checking for fseeko... yes checking for fsync... yes checking for ftello... yes checking for getcwd... yes checking for getpseudotty... no checking for getpwnam... yes checking for getpwuid... yes checking for getrlimit... yes checking for gettimeofday... yes checking for getwd... yes checking for lstat... yes checking for memcmp... yes checking for memset... yes checking for nanosleep... no checking for opendir... yes checking for putenv... yes checking for qsort... yes checking for readlink... yes checking for select... yes checking for setenv... yes checking for setpgid... yes checking for setsid... yes checking for sigaltstack... yes checking for sigstack... yes checking for sigset... yes checking for sigsetjmp... yes checking for sigaction... yes checking for sigvec... no checking for strcasecmp... yes checking for strerror... yes checking for strftime... yes checking for stricmp... no checking for strncasecmp... yes checking for strnicmp... no checking for strpbrk... yes checking for strtol... yes checking for tgetent... yes checking for towlower... yes checking for towupper... yes checking for iswupper... yes checking for usleep... yes checking for utime... yes checking for utimes... yes checking for st_blksize... no checking whether stat() ignores a trailing slash... no checking for iconv_open()... yes; with -liconv checking for nl_langinfo(CODESET)... yes checking for strtod in -lm... yes checking for strtod() and other floating point functions... yes checking --disable-acl argument... no checking for acl_get_file in -lposix1e... no checking for acl_get_file in -lacl... no checking for POSIX ACL support... no checking for Solaris ACL support... yes checking for AIX ACL support... no checking --disable-gpm argument... no checking for gpm... no checking --disable-sysmouse argument... no checking for sysmouse... no checking for rename... yes checking for sysctl... not usable checking for sysinfo... not usable checking for sysinfo.mem_unit... no checking for sysconf... yes checking size of int... (cached) 8 checking whether memmove handles overlaps... yes checking for _xpg4_setrunelocale in -lxpg4... no checking how to create tags... ctags -t checking how to run man with a section nr... man -s checking --disable-nls argument... no checking for msgfmt... msgfmt checking for NLS... no "po/Makefile" - disabled checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking for dlopen()... yes checking for dlsym()... yes checking setjmp.h usability... yes checking setjmp.h presence... yes checking for setjmp.h... yes checking for GCC 3 or later... yes configure: updating cache auto/config.cache configure: creating auto/config.status config.status: creating auto/config.mk config.status: creating auto/config.h Make: make Starting make in the src directory. If there are problems, cd to the src directory and run make there cd src && make first mkdir objects CC="gcc -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/openwin/include -I/opt/sfw/lib/ruby/1.6/sparc-solaris2.10 " srcdir=. sh ./osdef.sh gcc -c -I. -Iproto -DHAVE_CONFIG_H -DFEAT_GUI_GTK -I/usr/include/gtk-2.0 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/pango-1.0 -I/usr/openwin/include -I/usr/sfw/include -I/usr/sfw/include/freetype2 -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -g -O2 -I/usr/openwin/include -I/opt/sfw/lib/ruby/1.6/sparc-solaris2.10 -o objects/buffer.o buffer.c In file included from os_unix.h:29, from vim.h:245, from buffer.c:28: /usr/include/sys/stat.h:251: error: syntax error before "blksize_t" /usr/include/sys/stat.h:255: error: syntax error before '}' token /usr/include/sys/stat.h:309: error: syntax error before "blksize_t" /usr/include/sys/stat.h:310: error: conflicting types for 'st_blocks' /usr/include/sys/stat.h:252: error: previous declaration of 'st_blocks' was here /usr/include/sys/stat.h:313: error: syntax error before '}' token In file included from /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:132, from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/sys/siginfo.h:259: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:292: error: syntax error before '}' token /usr/include/sys/siginfo.h:294: error: syntax error before '}' token /usr/include/sys/siginfo.h:390: error: syntax error before "ctid_t" /usr/include/sys/siginfo.h:398: error: conflicting types for '__fault' /usr/include/sys/siginfo.h:267: error: previous declaration of '__fault' was here /usr/include/sys/siginfo.h:404: error: conflicting types for '__file' /usr/include/sys/siginfo.h:273: error: previous declaration of '__file' was here /usr/include/sys/siginfo.h:420: error: conflicting types for '__prof' /usr/include/sys/siginfo.h:287: error: previous declaration of '__prof' was here /usr/include/sys/siginfo.h:424: error: conflicting types for '__rctl' /usr/include/sys/siginfo.h:291: error: previous declaration of '__rctl' was here /usr/include/sys/siginfo.h:426: error: syntax error before '}' token /usr/include/sys/siginfo.h:428: error: syntax error before '}' token /usr/include/sys/siginfo.h:432: error: syntax error before "k_siginfo_t" /usr/include/sys/siginfo.h:437: error: syntax error before '}' token In file included from /usr/include/signal.h:26, from os_unix.h:163, from vim.h:245, from buffer.c:28: /opt/local/bin/../lib/gcc/sparc-sun-solaris2.6/3.4.6/include/sys/signal.h:173: error: syntax error before "siginfo_t" In file included from os_unix.h:163, from vim.h:245, from buffer.c:28: /usr/include/signal.h:111: error: syntax error before "siginfo_t" /usr/include/signal.h:113: error: syntax error before "siginfo_t" buffer.c: In function `buflist_new': buffer.c:1502: error: storage size of 'st' isn't known buffer.c: In function `buflist_findname': buffer.c:1989: error: storage size of 'st' isn't known buffer.c: In function `setfname': buffer.c:2578: error: storage size of 'st' isn't known buffer.c: In function `otherfile_buf': buffer.c:2836: error: storage size of 'st' isn't known buffer.c: In function `buf_setino': buffer.c:2874: error: storage size of 'st' isn't known buffer.c: In function `buf_same_ino': buffer.c:2894: error: dereferencing pointer to incomplete type buffer.c:2895: error: dereferencing pointer to incomplete type *** Error code 1 make: Fatal error: Command failed for target `objects/buffer.o' Current working directory /home/xluntor/vim72/src *** Error code 1 make: Fatal error: Command failed for target `first'

  Read the article

• Cannot create file in directory even though it's writable by a group I belong to

  - by Alan Berndt

  I have a directory structure owned by a certain group, and I am a member of the group that owns these directories. I am able to create files in one directory, but not in another, even though the permissions are the same. alan@bricky:/mnt/storage/media$ stat Music Music\ \(Lossy\)/ File: `Music' Size: 34 Blocks: 8 IO Block: 4096 directory Device: fb00h/64256d Inode: 4215424 Links: 3 Access: (2775/drwxrwsr-x) Uid: ( 1001/ media) Gid: ( 1001/ media) Access: 2011-08-19 11:45:03.182586898 -0700 Modify: 2011-08-19 11:44:01.412840027 -0700 Change: 2011-08-19 11:45:02.734603240 -0700 File: `Music (Lossy)/' Size: 6 Blocks: 8 IO Block: 4096 directory Device: fb00h/64256d Inode: 1512056832 Links: 2 Access: (2775/drwxrwsr-x) Uid: ( 1001/ media) Gid: ( 1001/ media) Access: 2011-08-19 11:45:03.190586606 -0700 Modify: 2011-08-19 10:34:46.526530313 -0700 Change: 2011-08-19 11:45:02.738603094 -0700 alan@bricky:/mnt/storage/media$ touch Music/test alan@bricky:/mnt/storage/media$ touch Music\ \(Lossy\)/test touch: cannot touch `Music (Lossy)/test': Permission denied

  Read the article

• Why 'timeout expired' exception thrown with StructureMap?

  - by Martin

  I'm getting a "timeout expired" exception thrown from a relatively heavily trafficked ASP.NET MVC 2 site I developed using StructureMap and Fluent NHibernate. I think that perhaps the connections aren't being disposed properly. What do you think may be causing this? Could it be my use of InstanceScope.Hybrid? Here's my NHibernateRegistry class; thanks in advance for your help: using MyProject.Core.Persistence.Impl; using FluentNHibernate.Cfg; using FluentNHibernate.Cfg.Db; using NHibernate; using NHibernate.ByteCode.LinFu; using NHibernate.Cfg; using MyProject.Core.FluentMapping; using StructureMap.Attributes; using StructureMap.Configuration.DSL; namespace MyProject.Core.Persistence { public class NHibernateRegistry : Registry { public NHibernateRegistry() { FluentConfiguration cfg = Fluently.Configure() .Database(MsSqlConfiguration.MsSql2005.ConnectionString( x => x.FromConnectionStringWithKey( "MyConnectionString")) .ProxyFactoryFactory(typeof (ProxyFactoryFactory).AssemblyQualifiedName)) .Mappings(m => m.FluentMappings.AddFromAssemblyOf<EntryMap>()); Configuration configuration = cfg.BuildConfiguration(); ISessionFactory sessionFactory = cfg.BuildSessionFactory(); ForRequestedType<Configuration>().AsSingletons() .TheDefault.IsThis(configuration); ForRequestedType<ISessionFactory>().AsSingletons() .TheDefault.IsThis(sessionFactory); ForRequestedType<ISession>().CacheBy(InstanceScope.Hybrid) .TheDefault.Is.ConstructedBy(ctx => ctx.GetInstance<ISessionFactory>().OpenSession()); ForRequestedType<IUnitOfWork>().CacheBy(InstanceScope.Hybrid) .TheDefaultIsConcreteType<UnitOfWork>(); ForRequestedType<IDatabaseBuilder>().TheDefaultIsConcreteType<DatabaseBuilder>(); } } }

  Read the article

• best practice? Consumer data in MySQL on Amazon EBS (Elastic block store)

  - by jeff7091

  This is a consumer app, so I will care about storage costs - I don't want to have 5x copies of data lying about. The app shards very well, so I can use MySQL and not have scaling issues. Amazon EBS has a nice baseline+snapshot backup capability that uses S3. This should have a light footprint (in terms of storage cost). BUT: the magnolia.com story scares the crap out of me: basically flawless block-level backup of a corrupt DB or filesystem. Is there anything that is nearly as storage efficient as EBS at the MySQL level?

  Read the article

• How to manage credentials on multiserver environment

  - by rush

  I have a some software that uses its own encrypted file for password storage ( such as ftp, web and other passwords to login to external systems, there is no way to use certificates ). On each server I've several instances of this software, each instance has its own password file. At the moment number of servers is permanently growing and it's getting harder and harder to manage all passwords on all instances up to date. Unfortunately, some servers are in cegregated network and there is no access from them to some centralized storage, but it works vice versa. My first idea was to create a git repository, encrypt each password with gpg and store it there and deliver it within deployment system, but security team was not satisfied with this idea and as it is insecure to store passwords in repository even in encrypted view ( from their words ). Nothing similar comes to my mind. Is there any way to implement safe and secure password storage with minimal effort to manage all passwords up-to-date? ps. if that matters I've red hat everywhere.

  Read the article

• Transferring files from computer to Android Simulator SD Card ?

  - by mgpyone

  I've tried Android Simulator for Mac and can use it well. also I've set 100 MB for SD Storage for that simulator. however, I don't found a way of transferring files from my Mac to that Android Simulator SD Storage. Current solution is I've to send files to my mail and have to access via Simulator ,then download to it . well, but it's not available fro all formats . something like image file(.img) are not allowed to download to the simulator. I've seek any folder of SD Card for Simulator within Android Folder I've extracted. I've found nothing. I want to transfer files from my HD to Android simulator SD card storage. Thus, is there any effective solution that support my idea ? I'm on Mac OS X 10.6.2.

  Read the article

• Has anyone used products by StorSimple? [closed]

  - by AlamedaDad

  Their products are storage systems similar to NetApp, but their "hook" is they provide automated tiered storage with the third tier being Cloud providers like Amazon and Azure. They have an interesting story in which they provide primary SAN/iSCSI storage to VMWare and Exchange and at the same time do snaphots to the Cloud. This provides a possible DR option if you have a second system at an alternate location. I was impressed, but I've never heard of them so I'm looking for input and advise on the product. Thanks in advance...

  Read the article

• Flexible virtualization infrastructure Design with libvirt

  - by Lessfoe

  I'm going to install a CentOS6 Server with Virtualization ( libvirtd ) capabilities on a DELL Server with Hardware RAID5 of around 6T of disk space ( It has 4x2T disks in a PERC700 RAID Controller ). I'm going then to install some guests which requires few resources except one that needs 500GB of disk space, 8/16GB of RAM and good performances. I was thinking about file images for guests storage but I'm not sure about the 500GB VM what needs good performances so that an LVM device could be better. So my question is what would be the best layout concerning: RAID setup ( RAID5, RAID1 + 1 disk for OS only. ) disk partitioning ( using the entire disk/ leave free space for future use and extending it with LVM ) guests storage management ( LVM devices or file images ( considering the 500GB VM that is performance demanding ) or mixed ) Where to put guests storage? /var/lib/libvirt/images or maybe in a custom dir separated from system /home/VMs Thanks in advance for any hint.

  Read the article

• Cross-platform distributed fault-tolerant (disconnected operation/local cache) filesystem

  - by Adrian Frühwirth

  We are facing a design "challenge" where we are required to set up a storage solution with the following properties: What we need HA a scalable storage backend offline/disconnected operation on the client to account for network outages cross-platform access client-side access from certainly Windows (probably XP upwards), possibly Linux backend integrates with AD/LDAP (permission management (user/group management, ...)) should work reasonably well over slow WAN-links Another problem is that we don't really know all possible use cases here, if people need to be able to have concurrent access to shared files or if they will only be accessing their own files, so a possible solution needs to account for concurrent access and how conflict management would look in this case from a user's point of view. This two years old blog posts sums up the impression that I have been getting during the last couple of days of research, that there are lots of current übercool projects implementing (non-Windows) clustered petabyte-capable blob-storage solutions but that there is none that supports disconnected operation nicely and natively, but I am hoping that we have missed an obvious solution. What we have tried OpenAFS We figured that we want a distributed network filesystem with a local cache and tested OpenAFS (which, as the only currently "stable" DFS supporting disconnected operation, seemed the way to go) for a week but there are several problems with it: it's a real pain to set up there are no official RHEL/CentOS packages the package of the current stable version 1.6.5.1 from elrepo randomly kernel panics on fresh installs, this is an absolute no-go Windows support (including the required Kerberos packages) is mystical. The current client for the 1.6 branch does not run on Windows 8, the current client for the 1.7 does but it just randomly crashes. After that experience we didn't even bother testing on XP and Windows 7. Suffice to say, we couldn't get it working and the whole setup has been so unstable and complicated to setup that it's just not an option for production. Samba + Unison Since OpenAFS was a complete disaster and no other DFS seems to support disconnected operation we went for a simpler idea that would sync files against a Samba server using Unison. This has the following advantages: Samba integrates with ADs; it's a pain but can be done. Samba solves the problem of remotely accessing the storage from Windows but introduces another SPOF and does not address the actual storage problem. We could probably stick any clustered FS underneath Samba, but that means we need a HA Samba setup on top of that to maintain HA which probably adds a lot of additional complexity. I vaguely remember trying to implement redundancy with Samba before and I could not silently failover between servers. Even when online, you are working with local files which will result in more conflicts than would be necessary if a local cache were only touched when disconnected It's not automatic. We cannot expect users to manually sync their files using the (functional, but not-so-pretty) GTK GUI on a regular basis. I attempted to semi-automate the process using the Windows task scheduler, but you cannot really do it in a satisfactory way. On top of that, the way Unison works makes syncing against Samba a costly operation, so I am afraid that it just doesn't scale very well or even at all. Samba + "Offline Files" After that we became a little desparate and gave Windows "offline files" a chance. We figured that having something that is inbuilt into the OS would reduce administrative efforts, helps blaming someone else when it's not working properly and should just work since people have been using this for years. Right? Wrong. We really wanted it to work, but it just doesn't. 30 minutes of copying files around and unplugging network cables/disabling network interfaces left us with (silent! there is only a tiny notification in Windows explorer in the statusbar, which doesn't even open Sync Center if you click on it!) undeletable files on the server (!) and conflicts that should not even be conflicts. In the end, we had one successful sync of a tiny text file, everything else just exploded horribly. Beyond that, there are other problems: Microsoft admits that "offline files" in Windows XP cannot cope with "large files" and therefore does not cache/sync them at all which would mean those files become unavailable if the connection drop In Windows 7 the feature is only available in the Professional/Ultimate/Enterprise editions. Summary Unless there is another fault-tolerant DFS that supports Windows natively I assume that stacking a HA Samba cluster on top of something like GlusterFS/Lustre/whatnot is the only option, but I hope that I am wrong here. How do other companies allow fault-tolerant network access to redundant storage in a heterogeneous environment with Windows?

  Read the article

• Crop circular or elliptical image from original UIImage

  - by vikas ojha

  I am working on openCV for detecting the face .I want face to get cropped once its detected.Till now I got the face and have marked the rect/ellipse around it on iPhone. Please help me out in cropping the face in circular/elliptical pattern (UIImage *) opencvFaceDetect:(UIImage *)originalImage { cvSetErrMode(CV_ErrModeParent); IplImage *image = [self CreateIplImageFromUIImage:originalImage]; // Scaling down /* Creates IPL image (header and data) ----------------cvCreateImage CVAPI(IplImage*) cvCreateImage( CvSize size, int depth, int channels ); */ IplImage *small_image = cvCreateImage(cvSize(image->width/2,image->height/2), IPL_DEPTH_8U, 3); /*SMOOTHES DOWN THYE GUASSIAN SURFACE--------:cvPyrDown*/ cvPyrDown(image, small_image, CV_GAUSSIAN_5x5); int scale = 2; // Load XML NSString *path = [[NSBundle mainBundle] pathForResource:@"haarcascade_frontalface_default" ofType:@"xml"]; CvHaarClassifierCascade* cascade = (CvHaarClassifierCascade*)cvLoad([path cStringUsingEncoding:NSASCIIStringEncoding], NULL, NULL, NULL); // Check whether the cascade has loaded successfully. Else report and error and quit if( !cascade ) { NSLog(@"ERROR: Could not load classifier cascade\n"); //return; } //Allocate the Memory storage CvMemStorage* storage = cvCreateMemStorage(0); // Clear the memory storage which was used before cvClearMemStorage( storage ); CGColorSpaceRef colorSpace; CGContextRef contextRef; CGRect face_rect; // Find whether the cascade is loaded, to find the faces. If yes, then: if( cascade ) { CvSeq* faces = cvHaarDetectObjects(small_image, cascade, storage, 1.1f, 3, 0, cvSize(20, 20)); cvReleaseImage(&small_image); // Create canvas to show the results CGImageRef imageRef = originalImage.CGImage; colorSpace = CGColorSpaceCreateDeviceRGB(); contextRef = CGBitmapContextCreate(NULL, originalImage.size.width, originalImage.size.height, 8, originalImage.size.width * 4, colorSpace, kCGImageAlphaPremultipliedLast|kCGBitmapByteOrderDefault); //VIKAS CGContextDrawImage(contextRef, CGRectMake(0, 0, originalImage.size.width, originalImage.size.height), imageRef); CGContextSetLineWidth(contextRef, 4); CGContextSetRGBStrokeColor(contextRef, 1.0, 1.0, 1.0, 0.5); // Draw results on the iamge:Draw all components of face in the form of small rectangles // Loop the number of faces found. for(int i = 0; i < faces->total; i++) { NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; // Calc the rect of faces // Create a new rectangle for drawing the face CvRect cvrect = *(CvRect*)cvGetSeqElem(faces, i); // CGRect face_rect = CGContextConvertRectToDeviceSpace(contextRef, // CGRectMake(cvrect.x * scale, cvrect.y * scale, cvrect.width * scale, cvrect.height * scale)); face_rect = CGContextConvertRectToDeviceSpace(contextRef, CGRectMake(cvrect.x*scale, cvrect.y , cvrect.width*scale , cvrect.height*scale*1.25 )); facedetectapp=(FaceDetectAppDelegate *)[[UIApplication sharedApplication]delegate]; facedetectapp.grabcropcoordrect=face_rect; NSLog(@" FACE off %f %f %f %f",facedetectapp.grabcropcoordrect.origin.x,facedetectapp.grabcropcoordrect.origin.y,facedetectapp.grabcropcoordrect.size.width,facedetectapp.grabcropcoordrect.size.height); CGContextStrokeRect(contextRef, face_rect); //CGContextFillEllipseInRect(contextRef,face_rect); CGContextStrokeEllipseInRect(contextRef,face_rect); [pool release]; } } CGImageRef imageRef = CGImageCreateWithImageInRect([originalImage CGImage],face_rect); UIImage *returnImage = [UIImage imageWithCGImage:imageRef]; CGImageRelease(imageRef); CGContextRelease(contextRef); CGColorSpaceRelease(colorSpace); cvReleaseMemStorage(&storage); cvReleaseHaarClassifierCascade(&cascade); return returnImage; } } Thanks Vikas

  Read the article

• Policy-based template design: How to access certain policies of the class?

  - by dehmann

  I have a class that uses several policies that are templated. It is called Dish in the following example. I store many of these Dishes in a vector (using a pointer to simple base class), but then I'd like to extract and use them. But I don't know their exact types. Here is the code; it's a bit long, but really simple: #include <iostream> #include <vector> struct DishBase { int id; DishBase(int i) : id(i) {} }; std::ostream& operator<<(std::ostream& out, const DishBase& d) { out << d.id; return out; } // Policy-based class: template<class Appetizer, class Main, class Dessert> class Dish : public DishBase { Appetizer appetizer_; Main main_; Dessert dessert_; public: Dish(int id) : DishBase(id) {} const Appetizer& get_appetizer() { return appetizer_; } const Main& get_main() { return main_; } const Dessert& get_dessert() { return dessert_; } }; struct Storage { typedef DishBase* value_type; typedef std::vector<value_type> Container; typedef Container::const_iterator const_iterator; Container container; Storage() { container.push_back(new Dish<int,double,float>(0)); container.push_back(new Dish<double,int,double>(1)); container.push_back(new Dish<int,int,int>(2)); } ~Storage() { // delete objects } const_iterator begin() { return container.begin(); } const_iterator end() { return container.end(); } }; int main() { Storage s; for(Storage::const_iterator it = s.begin(); it != s.end(); ++it){ std::cout << **it << std::endl; std::cout << "Dessert: " << *it->get_dessert() << std::endl; // ?? } return 0; } The tricky part is here, in the main() function: std::cout << "Dessert: " << *it->get_dessert() << std::endl; // ?? How can I access the dessert? I don't even know the Dessert type (it is templated), let alone the complete type of the object that I'm getting from the storage. This is just a toy example, but I think my code reduces to this. I'd just like to pass those Dish classes around, and different parts of the code will access different parts of it (in the example: its appetizer, main dish, or dessert).

  Read the article

• Centos expanding directory

  - by Ansell Cruz

  I currently have a file server, all the files are installed in /usr/local/nginx/html/. The setup is 1 hard disk with 1TB of data. This 1TB of storage is all used up. I asked the guys to add 2 HDDs with 2TB each. This new HDDs will be used for new storage of files. Now, if I mount this 2 new HDDs into /usr/local/nginx/html/, the current files in there will be deleted. My goal is to expand the storage in /usr/local/nginx/html/ without losing data in it. Would this be possible?

  Read the article

• SCCM deploy from VMware XP image

  - by HannesFostie

  We recently set up the latest version of SCCM and I managed to capture a .wim image from a virtual machine (build and capture task sequence). I want to use this .wim file to deploy winXP to different hardware, and therefor need to add device drivers to the task sequence. I created a driver package per laptop type, and deployed for the first time. However, I am getting a BSOD (0x00007B) which leads me to believe theres a problem with the storage drivers. After adjusting the task sequence to try and point to the mass storage drivers (which are applied at F6, I suppose) I do not get a list of compatible drivers (the list is empty). I looked around, and found some issues regarding hdc class drivers that are not recognized as mass storage drivers. The workaround suggested changing the INF file to make the driver a SCSIAdapter class driver, and importing these again, but to no avail. The list remains empty. Any help is much appreciated

  Read the article

• MD3200i Slow Performance and Queue Depth

  - by Caleb_S

  Read performance on our SAN is slow under certain workloads. When we compare this to some local storage, we find the local storage performing 2x as fast. The SAN performs well with a high Queue Depth, and poorly with a low queue depth. However, the local storage performs well with a low Queue Depth. I'd like to know the reason for this occurring and find out what the specific limiting factor is in this situation. MD3200i iSCSI SAN ($15,000) 6 x 600GB 15k SAS RAID5 6 x 2TB 7.2k NLS RAID5 XCOPY /j Benchmark: (Slow) 15k Array - 71MB/s (Queue Depth 1) 7.2k Array- 71MB/s (Queue Depth 1) Robycopy /MT:32 Benchmark: (Fast) 15k Array - 171MB/s (Queue Depth ~12) 7.2k Array- 128MB/s (Queue Depth ~12) , , Read Performance on a Local controller is fast under the workload the SAN is slow at. , HighPoint 2230 RAID Controller ($600) 4 x 1TB 7.2k SATA RAID5 XCOPY /j Benchmark: 7.2k Array - 145MB/s (Queue Depth 1) (appears to max out the SATA bus)

  Read the article

• Should I split my website into different servers

  - by Nyxynyx

  I have a website where a user uploads photos, the photos gets resized and thumbnailed, and stored on the server. At the same time, there are some INSERTS into a MySQL table regarding the photo uploaded (like description, user id etc). The site currently runs off a managed VPS, and I love the support it provides. However it is expensive to store the many small photos and the resizing and thumbnailing processes do cause spikes on the app performance. (Amazon S3 is pretty expensive, especially considering the costs for uploading many small files) Question: Will it be a good idea to move the image processing operations and image storage to another server which is an unmanaged dedicated server with a much lower cost/gb and keep the current VPS for its 24/7 support and hosting the webapp? Or should I move the entire site to the dedicated server? VPS Specs 16 cores 2.4GHz (E5620) 1GB memory 60GB Storage 3.5TB transfer $43/mth Managed (24/7) Dedicated Specs i3 2130 2 cores 3.4+ GHz 16 GB DDR3 2 x 1TB SATA2 storage 15 TB transfer $79/mth Unmanaged (Weekdays support) Software used Apache PHP MySQL Solr PostgreSQL ImageMagick

  Read the article

• Booting Windows7 kernel from an initrd/wim image file

  - by Ivo

  I'm wondering if it's possibile to have Win7 kernel and relative drivers (especially storage drivers) to boot from an initrd-like image file (maybe .wim?) and later then mount the windows root partition and complete the load of the full OS? I'll try to explain why: I'm running an emulated environment with NO REAL BIOS, and I'm passingthrough a raid storage controller. I want windows to boot from this controller array, but of course the BCD manager cannot access disks in the array until kernel and relative controller storage drivers are loaded. To be clear I get the classical winload.exe missing error. I need a similar solution to what Linux does, loading the kernel and his drivers, and later then mount the root partition and complete the boot. Any ideas or advices?

  Read the article

• Hover/Fadeto/Toggle Multiple Class Changing

  - by Slick Willis

  So my problem is rather simple and complex at the same time. I am trying to create links that fade in when you mouseover them and fade out when you mouseout of them. At the same time that you are going over them I would like a pic to slide from the left. This is the easy part, I have every thing working. The image fades and another image slides. I did this by using a hover, fadeto, and toggle("slide"). I would like to do this in a table format with multiple images being able to be scrolled over and sliding images out. The problem is that I am calling my sliding image to a class and when I hover over the letters both images slide out. Does anybody have a solution for this? I posted the code that I used below: <html> <head> <script type='text/javascript' src='http://accidentalwords.squarespace.com/storage/jquery/jquery-1.4.2.min.js'></script> <script type='text/javascript' src='http://accidentalwords.squarespace.com/storage/jquery/jquery-custom-181/jquery-ui-1.8.1.custom.min.js'></script> <style type="text/css"> .text-slide { display: none; margin: 0px; width: 167px; height: 50px; } </style> <script> $(document).ready(function(){ $(".letterbox-fade").fadeTo(1,0.25); $(".letterbox-fade").hover(function () { $(this).stop().fadeTo(250,1); $(".text-slide").toggle("slide", {}, 1000); }, function() { $(this).stop().fadeTo(250,0.25); $(".text-slide").toggle("slide", {}, 1000); }); }); </script> </head> <body style="background-color: #181818"> <table> <tr> <td><div class="letterbox-fade"><img src="http://accidentalwords.squarespace.com/storage/sidebar/icons/A-Letterbox-Selected.png" /></div></td> <td><div class="text-slide"><img src="http://accidentalwords.squarespace.com/storage/sidebar/icons/TEST.png" /></div></td> </tr> <tr> <td><div class="letterbox-fade"><img src="http://accidentalwords.squarespace.com/storage/sidebar/icons/B-Letterbox-Selected.png" /></div></td> <td><div class="text-slide"><img src="http://accidentalwords.squarespace.com/storage/sidebar/icons/TEST.png" /></div></td> </tr> </table> </body> </html>

  Read the article

• Windows XP 32-bit + RocketRaid 622 + 4 x 3TB = not quite a RAID setup

  - by gmoney

  I'm looking to make a 6TB RAID 10 array from my new pile of drives under Windows XP 32-bit, however they are only for auxiliary storage. After adding all the drives to an array, and initializing them XP sees only a fraction of the storage, 2TB. I'm assuming this has to do with MBR vs GPT. Is making a series of 2TB volumes and then spanning my only solution? Most questions online have to do with booting from this setup, but I'm just using them as extra storage. Hardware: 4 x 3TB Hitachi Deskstars + RocketRaid 622 + Sans Digital TR8M TowerRAID. The array is connected via eSATA.

  Read the article

• Which has a faster data transfer rate? WIFI (tablet or cell phone, not LTE) or MicroSD (Class 10)?

  - by techaddict

  Which of the two methods of dta transfer trasfers data at a faster rate for smartphones and tablets? Standard WIFI, or MicroSD Cards? I wonder if it would be actually faster to access data on external storage then it would be to have the MicroSD card in my smartphone or tablet. Currently I have a class 10 32GB MicroSD card in my cell phone. I am looking to get the new Google Nexus tablet but it does not offer expandable internal storage. I wonder if that's really a detriment; because if WIFI is faster than MicroSD, then it would matter almost none at all that you couldn't expand the storage internally. If the case is that WIFI is faster, and people caught onto this, then people could save a lot of money on lower memory ipads/iphones/ipods, tablets, and smartphones!

  Read the article

• Outlook '10 hangs often, IMAP sync

  - by user23150

  We have 3 employees using IMAP to sync with their Desktop and Android Phones. Two are using 70% of their accounts storage, another is using 80%. They all have similar counts on folder structure, etc. The employee with the 80% storage is constantly having Outlook freeze on them for up to 5 minutes at a time. I realize this is Outlook connecting and doing activity on the server, but no one else has this problem. In fact, one user with the 70% storage used uses a very slow laptop, and doesn't have freezing issues. The network is the same, the settings are the same - at a loss how to proceed? Obviously "Outlook is a crummy IMAP client" doesn't help management...

  Read the article

• How to host my own cloud so that videos are viewable via desktop web browser?

  - by jake9115

  I want to host my own cloud storage solution, something like Dropbox but entirely dependent on my own central machine. This way things are more secure if setup correctly, and there are artificial storage limitations or pay-walls. Some thing similar to ownCloud: http://owncloud.org/ There is one important feature I want to have: the ability the stream movies in a web browser from my personal cloud to anywhere in the world. In the past I tried this with a NAS, and I mapped XBMC to the NAS via SFTP, and certain media types could stream in this manner. I've also used things like PLEX. In this case, I am looking for a single solution for personal cloud storage and movie streaming from that cloud into a web browser. Does anyone know if this can be accomplished? Thanks for the suggestions!

  Read the article

• 3G USB Modem Not Working in 12.04

  - by Seyed Mohammad

  When I connect my 3G USB Modem to my laptop with 12.04, nothing shows up in Network-Manager. This modem is working in 11.10 and the modem is shown in Network-Manager but not in 12.04 !! Here are the outputs of lsusb and usb-devices on two machines , one with 11.10 and the other with 12.04 : Ubuntu-11.10 : $ lsusb Bus 002 Device 009: ID 1c9e:6061 $ usb-devices T: Bus=02 Lev=02 Prnt=02 Port=03 Cnt=01 Dev#= 9 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=3G USB Modem ?? S: SerialNumber=000000000002 C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Ubuntu-12.04 : $ lsusb Bus 002 Device 003: ID 1c9e:6061 OMEGA TECHNOLOGY WL-72B 3.5G MODEM $ usb-devices T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1c9e ProdID=6061 Rev=00.00 S: Manufacturer=Qualcomm, Incorporated S: Product=USB MMC Storage S: SerialNumber=000000000002 C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) As the output of the above commands show, the device is detected as a modem in 11.10 but in 12.04 it is detected as a USB storage (the device is both a 3G Modem and a SD-card USB adapter). Any help ?!

  Read the article

• Announcing the latest update to Oracle VM Server for x86 2.2 Release

  - by Honglin Su

  More and more customers have discovered that Oracle delivers more value with Oracle VM compared with other server virtualization solutions, and we've seen the momentum that customers succeed with Oracle VM and leading partners support Oracle VM. Recently, Oracle VM server for x86 with Windows PV Drivers passed Microsoft SVVP requirements for Windows servers, which provides customers more confidence to deploy Microsoft Windows guest OS onto Oracle VM server for x86. Today I'm pleased to announce the Oracle VM server for x86 2.2.2 release. See the new features introduced in the 2.2.2 release. Expand the guest OS support to include Oracle Linux 6.x and Oracle Solaris 11 Express OS. For a complete list of guest OS support, please refer to the Oracle VM server x86 release note. The VMPInfo system information and cluster troubleshooting utility is provided with this release. Additional information on VMPInfo is also available in the following My Oracle Support Notes: 1263293.1 Post-installation check list for new Oracle VM Server 1290587.1 Performing Site Reviews and Cluster Troubleshooting with VMPInfo A new storage repository option to provide NFS mount options when creating a storage repository. For more information on this new parameter, see Oracle VM Server User Guide "Adding a Storage Repository". Updated OCFS2 cluster file system, libdhcp, device drivers. See details and additional enhancements at Oracle VM Server User Guide: New Features in Release 2.2.2. The Oracle VM Server for x86 ISO image is available for download at Oracle's E-Delivery site. If you've subscribed to Oracle's Unbreakable Linux Network (ULN), you can simply run up2date command to update the server. Please refer to Oracle VM Upgrade Guide: Upgrading Oracle VM Server. There's no change to Oracle VM Manager, which remains at 2.2.0 with the patch 2.2-16. If you have any questions about Oracle VM Serer for x86, you may post your questions at OTN discussion forum; or purchase support for Oracle Unbreakable Linux and Oracle VM. For Oracle's x86 systems, Oracle VM support as well Oracle Linux and Oracle Solaris support are included in the Oracle Premier Support for Systems. For more information about Oracle's virtualization, visit oracle.com/virtualization.

  Read the article

• How to Avoid Your Next 12-Month Science Project

  - by constant

  While most customers immediately understand how the magic of Oracle's Hybrid Columnar Compression, intelligent storage servers and flash memory make Exadata uniquely powerful against home-grown database systems, some people think that Exalogic is nothing more than a bunch of x86 servers, a storage appliance and an InfiniBand (IB) network, built into a single rack. After all, isn't this exactly what the High Performance Computing (HPC) world has been doing for decades? On the surface, this may be true. And some people tried exactly that: They tried to put together their own version of Exalogic, but then they discover there's a lot more to building a system than buying hardware and assembling it together. IT is not Ikea. Why is that so? Could it be there's more going on behind the scenes than merely putting together a bunch of servers, a storage array and an InfiniBand network into a rack? Let's explore some of the special sauce that makes Exalogic unique and un-copyable, so you can save yourself from your next 6- to 12-month science project that distracts you from doing real work that adds value to your company. Engineering Systems is Hard Work! The backbone of Exalogic is its InfiniBand network: 4 times better bandwidth than even 10 Gigabit Ethernet, and only about a tenth of its latency. What a potential for increased scalability and throughput across the middleware and database layers! But InfiniBand is a beast that needs to be tamed: It is true that Exalogic uses a standard, open-source Open Fabrics Enterprise Distribution (OFED) InfiniBand driver stack. Unfortunately, this software has been developed by the HPC community with fastest speed in mind (which is good) but, despite the name, not many other enterprise-class requirements are included (which is less good). Here are some of the improvements that Oracle's InfiniBand development team had to add to the OFED stack to make it enterprise-ready, simply because typical HPC users didn't have the need to implement them: More than 100 bug fixes in the pieces that were not related to the Message Passing Interface Protocol (MPI), which is the protocol that HPC users use most of the time, but which is less useful in the enterprise. Performance optimizations and tuning across the whole IB stack: From Switches, Host Channel Adapters (HCAs) and drivers to low-level protocols, middleware and applications. Yes, even the standard HPC IB stack could be improved in terms of performance. Ethernet over IB (EoIB): Exalogic uses InfiniBand internally to reach high performance, but it needs to play nicely with datacenters around it. That's why Oracle added Ethernet over InfiniBand technology to it that allows for creating many virtual 10GBE adapters inside Exalogic's nodes that are aggregated and connected to Exalogic's IB gateway switches. While this is an open standard, it's up to the vendor to implement it. In this case, Oracle integrated the EoIB stack with Oracle's own IB to 10GBE gateway switches, and made it fully virtualized from the beginning. This means that Exalogic customers can completely rewire their server infrastructure inside the rack without having to physically pull or plug a single cable - a must-have for every cloud deployment. Anybody who wants to match this level of integration would need to add an InfiniBand switch development team to their project. Or just buy Oracle's gateway switches, which are conveniently shipped with a whole server infrastructure attached! IPv6 support for InfiniBand's Sockets Direct Protocol (SDP), Reliable Datagram Sockets (RDS), TCP/IP over IB (IPoIB) and EoIB protocols. Because no IPv6 = not very enterprise-class. HA capability for SDP. High Availability is not a big requirement for HPC, but for enterprise-class application servers it is. Every node in Exalogic's InfiniBand network is connected twice for redundancy. If any cable or port or HCA fails, there's always a replacement link ready to take over. This requires extra magic at the protocol level to work. So in addition to Weblogic's failover capabilities, Oracle implemented IB automatic path migration at the SDP level to avoid unnecessary failover operations at the middleware level. Security, for example spoof-protection. Another feature that is less important for traditional users of InfiniBand, but very important for enterprise customers. InfiniBand Partitioning and Quality-of-Service (QoS): One of the first questions we get from customers about Exalogic is: “How can we implement multi-tenancy?” The answer is to partition your IB network, which effectively creates many networks that work independently and that are protected at the lowest networking layer possible. In addition to that, QoS allows administrators to prioritize traffic flow in multi-tenancy environments so they can keep their service levels where it matters most. Resilient IB Fabric Management: InfiniBand is a self-managing network, so a lot of the magic lies in coming up with the right topology and in teaching the subnet manager how to properly discover and manage the network. Oracle's Infiniband switches come with pre-integrated, highly available fabric management with seamless integration into Oracle Enterprise Manager Ops Center. In short: Oracle elevated the OFED InfiniBand stack into an enterprise-class networking infrastructure. Many years and multiple teams of manpower went into the above improvements - this is something you can only get from Oracle, because no other InfiniBand vendor can give you these features across the whole stack! Exabus: Because it's not About the Size of Your Network, it's How You Use it! So let's assume that you somehow were able to get your hands on an enterprise-class IB driver stack. Or maybe you don't care and are just happy with the standard OFED one? Anyway, the next step is to actually leverage that InfiniBand performance. Here are the choices: Use traditional TCP/IP on top of the InfiniBand stack, Develop your own integration between your middleware and the lower-level (but faster) InfiniBand protocols. While more bandwidth is always a good thing, it's actually the low latency that enables superior performance for your applications when running on any networking infrastructure: The lower the latency, the faster the response travels through the network and the more transactions you can close per second. The reason why InfiniBand is such a low latency technology is that it gets rid of most if not all of your traditional networking protocol stack: Data is literally beamed from one region of RAM in one server into another region of RAM in another server with no kernel/drivers/UDP/TCP or other networking stack overhead involved! Which makes option 1 a no-go: Adding TCP/IP on top of InfiniBand is like adding training wheels to your racing bike. It may be ok in the beginning and for development, but it's not quite the performance IB was meant to deliver. Which only leaves option 2: Integrating your middleware with fast, low-level InfiniBand protocols. And this is what Exalogic's "Exabus" technology is all about. Here are a few Exabus features that help applications leverage the performance of InfiniBand in Exalogic: RDMA and SDP integration at the JDBC driver level (SDP), for Oracle Weblogic (SDP), Oracle Coherence (RDMA), Oracle Tuxedo (RDMA) and the new Oracle Traffic Director (RDMA) on Exalogic. Using these protocols, middleware can communicate a lot faster with each other and the Oracle database than by using standard networking protocols, Seamless Integration of Ethernet over InfiniBand from Exalogic's Gateway switches into the OS, Oracle Weblogic optimizations for handling massive amounts of parallel transactions. Because if you have an 8-lane Autobahn, you also need to improve your ramps so you can feed it with many cars in parallel. Integration of Weblogic with Oracle Exadata for faster performance, optimized session management and failover. As you see, “Exabus” is Oracle's word for describing all the InfiniBand enhancements Oracle put into Exalogic: OFED stack enhancements, protocols for faster IB access, and InfiniBand support and optimizations at the virtualization and middleware level. All working together to deliver the full potential of InfiniBand performance. Who else has 100% control over their middleware so they can develop their own low-level protocol integration with InfiniBand? Even if you take an open source approach, you're looking at years of development work to create, test and support a whole new networking technology in your middleware! The Extras: Less Hassle, More Productivity, Faster Time to Market And then there are the other advantages of Engineered Systems that are true for Exalogic the same as they are for every other Engineered System: One simple purchasing process: No headaches due to endless RFPs and no “Will X work with Y?” uncertainties. Everything has been engineered together: All kinds of bugs and problems have been already fixed at the design level that would have only manifested themselves after you have built the system from scratch. Everything is built, tested and integrated at the factory level . Less integration pain for you, faster time to market. Every Exalogic machine world-wide is identical to Oracle's own machines in the lab: Instant replication of any problems you may encounter, faster time to resolution. Simplified patching, management and operations. One throat to choke: Imagine finger-pointing hell for systems that have been put together using several different vendors. Oracle's Engineered Systems have a single phone number that customers can call to get their problems solved. For more business-centric values, read The Business Value of Engineered Systems. Conclusion: Buy Exalogic, or get ready for a 6-12 Month Science Project And here's the reason why it's not easy to "build your own Exalogic": There's a lot of work required to make such a system fly. In fact, anybody who is starting to "just put together a bunch of servers and an InfiniBand network" is really looking at a 6-12 month science project. And the outcome is likely to not be very enterprise-class. And it won't have Exalogic's performance either. Because building an Engineered System is literally rocket science: It takes a lot of time, effort, resources and many iterations of design/test/analyze/fix to build such a system. That's why InfiniBand has been reserved for HPC scientists for such a long time. And only Oracle can bring the power of InfiniBand in an enterprise-class, ready-to use, pre-integrated version to customers, without the develop/integrate/support pain. For more details, check the new Exalogic overview white paper which was updated only recently. P.S.: Thanks to my colleagues Ola, Paul, Don and Andy for helping me put together this article! var flattr_uid = '26528'; var flattr_tle = 'How to Avoid Your Next 12-Month Science Project'; var flattr_dsc = 'While most customers immediately understand how the magic of Oracle's Hybrid Columnar Compression, intelligent storage servers and flash memory make Exadata uniquely powerful against home-grown database systems, some people think that Exalogic is nothing more than a bunch of x86 servers, a storage appliance and an InfiniBand (IB) network, built into a single rack.After all, isn't this exactly what the High Performance Computing (HPC) world has been doing for decades?On the surface, this may be true. And some people tried exactly that: They tried to put together their own version of Exalogic, but then they discover there's a lot more to building a system than buying hardware and assembling it together. IT is not Ikea.Why is that so? Could it be there's more going on behind the scenes than merely putting together a bunch of servers, a storage array and an InfiniBand network into a rack? Let's explore some of the special sauce that makes Exalogic unique and un-copyable, so you can save yourself from your next 6- to 12-month science project that distracts you from doing real work that adds value to your company.'; var flattr_tag = 'Engineered Systems,Engineered Systems,Infiniband,Integration,latency,Oracle,performance'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2012/04/how-avoid-your-next-12-month-science-project'; var flattr_lng = 'en_GB'

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >