Search Results

Search found 32520 results on 1301 pages for 'local machine'.

Page 72/1301 | < Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >

• development and music recording machine suggestions?

  - by dean nolan

  I wasn't sure if this belongs on SuperUser so flag if so. I am looking to build, primarily, a windows development machine that is also good for recording using Cubase. I know I should use seperate machines but I'm on a budget this time of year. I also havn't kept up with hardware for quite a few years. Basically I know I want quad core, multiple monitor support (no gaming requirements). A lot of RAM, very quiet case and super fast HDD (SSD OR 10,000RPM)for compiling and latency. I will store libraries and other data on a USB drive. Sound card is not needed as I will be using an audio interface, all other music recording equipment is taken care of also. I could do with some decent monitor recomendations also. All suggestions welcome, thanks.

  Read the article

• Java 6.0 Virtual Machine re-caches application on every load

  - by David Neale

  I have a Java application which is loaded and cached by the JRE and for most users it only needs to cache once unless the application software has changed. However, I have one computer that caches the entire application every time they load it. It is not the version of the JRE, I have that running on other machines. It also works on this machine if logged in as a local admin, just not as a standard user. Does anybody have any ideas on what might be causing this?

  Read the article

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• Cannot connect to a 2008 sql server named instance hosted in a azure virtual machine

  - by emardini

  When I try to connect to a named instance in a SQL SERVER hosted in a azure VM I get this message: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1) The problem is the sql browser is not working properly, when I start the sql browser service it closes after a few seconds and the event log says "There are no instances of SQL Server or SQL Server Analysis Services." But I do have a named instance, I can connect locally to this instance. I've re-installed sql browser and the instance but ii does not work. The host is a azure virtual machine windows server 2008 datacenter. Please help. Thank you

  Read the article

• bash code in rc.local not excuting after bootup

  - by mrTomahawk

  Does anyone know why a system would not execute the script code within rc.local on bootup? I have a post configuration bash script that I want to run after the initial install of VMware ESX (Red Hat), and for some reason it doesn't seem to execute. I have the setup to log its start of execution and even its progress so that I can see how far it gets in case it fails at some point, but even when I look at that log, I am finding that didn't even started the execution of the script code. I already checked to see that script has execution permissions (755), what else should I be looking at? Here is the first few lines of my code: #!/bin/sh echo >> /tmp/configLog "" echo >> /tmp/configLog "Entering maintenance mode"

  Read the article

• Freeware Local Proxy for Proxy Chaining with HTTPAUTH

  - by pepoluan

  I am looking for a freeware local proxy to perform proxy-chaining with HTTPAUTH. To explain my situation: In my workplace I am forced to keep switching between several internet-connected apps, and thus everytime I have to type in the credentials (or, at least, click on 'OK' to send my previously-saved credential). To make matters more annoying, the proxy login times out every 30 minutes, requiring me to lather-rinse-repeat the whole annoyance. I'd like to just point them all to a locally installed proxy which will on its own perform the required HTTPAUTH against the corporate proxy. I've tried Cntlm, but it always fail to authenticate (and according to this thread, that is due to the proxy using HTTPAUTH which is not supported by Cntlm) Any suggestions? ETA: I found Polipo, but it's kinda wonky on Windows. Especially if I visit a new URL, and the DNS server is a bit slow, then Polipo will simply drop/refuse the connection. And I have to put my password in plaintext. If there's a better suggestion, I'm all ears.

  Read the article

• md5sum repeatedly gives different checksum for same file on same machine

  - by Joel

  I have a very small and quite old hard drive disk, about 32G. On to this disk I have copied a largish tar file, about 5G. When I run md5sum to generate a checksum on this file I repeatedly get different results (on the same machine and the same file). This obviously should not happen. If I repeat the experiment with a much smaller file, as expected the checksum is the same each time. I can only assume that because the large file is spanning most of the disk, and it is an old drive, I am experiencing a lot of read errors on the hard drive - and it needs replacing? Could there be any other good reason for this? Something I can do to fix the problem other than buying a new disk? Update: sha1sum also produces inconsistent results.

  Read the article

• How to query a DHCP server to get the local DNS serves

  - by Dan Berlyoung

  I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a)reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b)calling their T/S (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

  Read the article

• How to query a DHCP server to get the local DNS serves

  - by Dan Berlyoung

  I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a)reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b)calling their T/S (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?

  Read the article

• SQL Server Files Local or NAS or SAN?

  - by Jedi Master Spooky

  I have to install a new Server with SQL Server 2008, What do you recommend, One server with Raid 10 or the Files in a NAS? What about iSCSI should I use it? What about SAN? The server has 4Gb of RAM and that database file is about 2GB. To make my self clear today the server has no RAID, I have to implement some kind of strategy so if something happend I can have my files safe, so What should I choose Local Files, NAS, SAN? What option has the most performance, what is the more secure?

  Read the article

• How to connect to my Local Host?

  - by Mazen Ayman

  I have Mac OSx (mountain Lion), Windows 7, Fedora 17 installed on my Macbook pro, and I can't connect to the local host on any of them, it always tells me can't connect. I'm learning mysql and from the tutorials, I guess I have to be connected to my localhost to create databases and stuff, but do I have to install something first for it to work? P.S. - for mac, I don't have the option "web sharing" to enable in the system preferences. - for windows, I tried to enable IIS, but it gives me an error ... I also tried to work it out using the cmd.exe but it just doesn't work as well. - for fedora, I'm new to it, but I just installed and I have no idea why it's not working.

  Read the article

• Will Dolphin emulator run (smoothly) on this machine?

  - by Mark

  Product Specs: Intel® NM10 Express chipset /w Intel® Atom® D525 (dual-core, 1.8 GHz) I think the most I can put in there for RAM is 4 GB. (They don't make 8 GB SODIMM do they?) The Dolphin site is pretty vague about requirements: Windows XP or higher, or Linux, or MacOSX Intel Fast CPU with SSE2. GPU with Pixel Shader 2.0 or greater. Some integrated graphics chips work but it depends on the model (and only with DirectX 9). I'm trying to make a light-weight quiet little machine for streaming video and playing eumulators, and I'm trying to figure out the minimum requirements I will need to do what I want. I know I'm not supposed to ask for product recommendations here, so if you could just advise the minimum requirements in terms of CPU, graphics card, and RAM, that'd be helpful.

  Read the article

• Local Live Quicktime Video Broadcast, latency?

  - by Snowwire

  I'm looking into the feasibility of using a local server to distribute live video of a conference to delegates in the same room. They would still hear the live audio coming from the speaker, so only the video would be streamed. I was considering a Darwin Steaming Server (a lot of iPhone users to support) and encoding with H.264. My main concern is latency across the network. Even with everything running locally, would there be lip sync issues between the live audio and the 'live' video stream? It feels like there will be problems given the encoding, broadcasting, decoding to be completed, but I've never done any like this before so thought I would check. Thanks

  Read the article

• JBoss thrown error looking up local address when starting

  - by Jeeba

  Hello im installing a fresh Jboss 5.1 in a Centos 5.5 machine. I dont have Apache installed. So when I try to start jboss using the comand ./run.sh I get the following error 15:13:57,414 INFO [JMXKernel] Legacy JMX core initialized 15:14:03,856 ERROR [ServerInfo] Error looking up local address java.net.UnknownHostException: dhcppc1: dhcppc1 at java.net.InetAddress.getLocalHost(InetAddress.java:1354) at org.jboss.system.server.ServerInfo.getHostAddress(ServerInfo.java:364) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) .... After that i can run Jboss only from 127.0.0.1:8080 but using localhost:8080 doesnt work. I think its a centos configuration problem but im a total newbye managing ports and maybe firewalls, so what do you think could be the problem?

  Read the article

• traffic shaping for certain (local) users

  - by JMW

  Hello, i'm using ubuntu 10.10 i've a local backup user called "backup". :) i would like to give this user just a bandwidth of 1Mbit. No matter which software wants to connect to the network. this solution doesn't work: iptables -t mangle -A OUTPUT -p tcp -m owner --uid-owner 1001 -j MARK --set-mark 12 iptables -t mangle -A POSTROUTING -p tcp -m owner --uid-owner 1001 -j MARK --set-mark 12 tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 2 htb default 1 tc filter add dev eth0 parent 2: protocol ip pref 2 handle 50 fw classid 2:6 tc class add dev eth0 parent 2: classid 2:6 htb rate 10Kbit ceil 1Mbit tc qdisc show dev eth0 tc class show dev eth0 tc filter show dev eth0 does anyone know how to do it? thanks a lot in advance

  Read the article

• SSL certificate: unable to get local issuer certificate

  - by celwell

  I'm running Debian (Lenny). When I run this: curl --ssl https://www.google.com I get this error: curl: (60) SSL certificate problem: unable to get local issuer certificate More details here: http://curl.haxx.se/docs/sslcerts.html curl performs SSL certificate verification by default, using a "bundle" of Certificate Authority (CA) public keys (CA certs). If the default bundle file isn't adequate, you can specify an alternate file using the --cacert option. If this HTTPS server uses a certificate signed by a CA represented in the bundle, the certificate verification probably failed due to a problem with the certificate (it might be expired, or the name might not match the domain name in the URL). If you'd like to turn off curl's verification of the certificate, use the -k (or --insecure) option.

  Read the article

• CSS, JS and images are not loading while sharing WAMP over local network

  - by Hardik Thaker

  I have share my wamp over my personal LAN . (Server IP : 192.168.0.100) When I am trying to access wamp server it's working perfectly. But when I open website hosted on server using client machine (192.168.0.103) , it doesn't load CSS - Images and JS files. So I saw console and found that my browser is trying to load : localhost//mysite/css/style.css And failing to load resource. now when I try to load the same resource directly from browser using 192.168.0.100/mysite/css/style.css It's showing me css file ! Now I am confused how to solve this problem so that my browser load that css perfectly ! Please help me ! thanks in advance !

  Read the article

• How can i use my local mysqldump through ssh tunnel

  - by Matthias Kleine

  I would like to dump a mysql-database with mysqldump. But: This command isn't installed on the remote server. It is possible to use my local mysqldump command, to connect via an ssh tunnel to achieve this? I found several solutions, but each one required the mysqldump command directly on the server. When I use Sequel Pro (an Mac OS X App), I can perform an export via an SSH tunnel. But this is not the fastest solution and cannot be used on a unix server...

  Read the article

• Routing to various node.js servers on same machine

  - by Dtang

  I'd like to set up multiple node.js servers on the same machine (but listening on different ports) for different projects (so I can pull any down to edit code without affecting the others). However I want to be able to access these web apps from a browser without typing in the port number, and instead map different urls to different ports: e.g. 45.23.12.01/app - 45.23.12.01:8001. I've considered using node-http-proxy for this, but it doesn't yet support SSL. My hunch is that nginx might be the most suitable. I've never set up nginx before - what configuration do I need to do? The examples of config files I've seen only deal with subdomains, which I don't have. Alternatively, is there a better (stable, hassle-free) way of hosting multiple apps under the same IP address?

  Read the article

• Urgent SSH Local Port Redirection

  - by Salina Odelva

  Hi, everyone. I have a shell account but the admin has restricted ssh access to the server. The server is listening on 0.0.0.0:22 but the firewall blocks any incoming attempts to this port. He says he is doing maintenance but I don't believe him and I need to backup my stuff with ssh. My question is that: Is it possible to do this: Me (Wan IP) <- Hosting Server (tcp/8080) redirects to Hosting Server (tcp/22) I don't want to involve my own linux machine in this and I can only make use of ssh.. Thanks!!

  Read the article

• Having problems with connecting to/seeing the local SQL server with Microsoft SQL Server Management Studio

  - by Hans-Henrik

  I'm having some difficulties when I'm trying to connect to my local SQL Server. I'm pretty sure the server is running (many of the other topics on this subject suggests that the services might not be running, so I kinda looked into it, but they do seem to be running). But when I try to access it through Microsoft SQL Server Management Studio it doesn't seem to be able to find them. Server type: Database Engine Server name: ILIZANESQL* - I'm trying to "browse for more..." to find my server, but it doesn't show up Authentication: Windows Authentication

  Read the article

• Password manager solution: Symbian based phone and a Linux machine (Windows is not important, but wo

  - by Kent

  Hi, I currently use KeePassX to manage my passwords on my Linux (Xubuntu) machine. It's nice to have all the passwords encrypted, but sometimes I'd like to be able to tell a password when I'm on the run. Therefore I'm looking for a solution which I can synchronize with my phone. I have a Nokia N82 which is a Symbian OS v9.2 based phone for the S60 3rd Edition platform with Feature Pack 1. I like an open source solution if it's possible. In case it isn't I wouldn't mind paying for a good solution. If Windows may be added to the synchronization mix it's nice, but it's absolutely not a primary requirement (I don't even have any computer running Windows).

  Read the article

• reduce memory footprint of java virtual machine

  - by Lorenzo Boccaccia

  I've a citrix server where multiple users use a multiple java application. Is there a way to reduce the memory footprint of the jvm itself? The max heap is already set fairly low (64MB), as the permgen (32MB) space and we're to the point that the jvm itself uses way more memory than the application itself (the committed area is around 350MB) I'm looking for a way to reduce the jvm ram usage or to make the all the applications run within the same jvm or any other way of sharing common pages between running jvm (if possible) or try switch to switch to a jvm if a jvm exists having optimizations relative to this scenario currently using windows 2003 server and sun java virtual machine 1.6

  Read the article

• Connecting to local Sql server 2005 through Internet

  - by Manish

  Hello My Sql server is on Local Machine, I want to access it through Internet. I Configure Surace manager and Configuration manager of sqlserver 2005 for remote access. My sqlserver is running on port:1433 I am using port forwarding , I can access service of other ports, My Connetion String Is: Data Source=190.190.200.100,1433;Network Library=DBMSSOCN;Initial Catalog=myDataBase;User ID=myUsername;Password=myPassword; But it gives following error when i am trying to connect sql server through internet: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.)

  Read the article

• Correct password for ssh key rejected when ssh-d into machine

  - by user20342

  When I am logged into my machine directly, I can do all git operations, and when prompted for a password, the password is accepted. When I ssh into the same box and run git operations on the same repos, the password is rejected. Relevant section of .ssh/config looks like this: # Generic settings Host * ServerAliveInterval 600 ControlPath /tmp/ssh-%r@%h:%p ControlMaster auto KeepAlive yes IdentityFile ~/.ssh/id_rsa.pub Transaction looks like this when I login when I ssh into my box: {12-12-03 9:41}hbrown-wks2:~/workspace/spt/project@master??? hbrown% git pull Enter passphrase for key '/home/hbrown/.ssh/id_rsa.pub': Enter passphrase for key '/home/hbrown/.ssh/id_rsa.pub': Enter passphrase for key '/home/hbrown/.ssh/id_rsa.pub': Permission denied (publickey). fatal: Could not read from remote repository. Please make sure you have the correct access rights and the repository exists. Using bash does not appear to make a difference (i.e. ssh-agent /bin/bash). This is a recent development, but I can't cite the change that caused it.

  Read the article

< Previous Page | 68 69 70 71 72 73 74 75 76 77 78 79  | Next Page >