Search Results

Search found 2134 results on 86 pages for 'numeric limits'.

Page 74/86 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

• Retain numerical precision in an R data frame?

  - by David

  When I create a dataframe from numeric vectors, R seems to truncate the value below the precision that I require in my analysis: data.frame(x=0.99999996) returns 1 (see update 1) I am stuck when fitting spline(x,y) and two of the x values are set to 1 due to rounding while y changes. I could hack around this but I would prefer to use a standard solution if available. example Here is an example data set d <- data.frame(x = c(0.668732936336141, 0.95351462456867, 0.994620622127435, 0.999602102672081, 0.999987126195509, 0.999999955814133, 0.999999999999966), y = c(38.3026509783688, 11.5895099585560, 10.0443344234229, 9.86152339768516, 9.84461434575695, 9.81648333804257, 9.83306725758297)) The following solution works, but I would prefer something that is less subjective: plot(d$x, d$y, ylim=c(0,50)) lines(spline(d$x, d$y),col='grey') #bad fit lines(spline(d[-c(4:6),]$x, d[-c(4:6),]$y),col='red') #reasonable fit Update 1 Since posting this question, I realize that this will return 1 even though the data frame still contains the original value, e.g. > dput(data.frame(x=0.99999999996)) returns structure(list(x = 0.99999999996), .Names = "x", row.names = c(NA, -1L), class = "data.frame") Update 2 After using dput to post this example data set, and some pointers from Dirk, I can see that the problem is not in the truncation of the x values but the limits of the numerical errors in the model that I have used to calculate y. This justifies dropping a few of the equivalent data points (as in the example red line).

  Read the article

• Faster way to convert from a String to generic type T when T is a valuetype?

  - by Kumba

  Does anyone know of a fast way in VB to go from a string to a generic type T constrained to a valuetype (Of T as Structure), when I know that T will always be some number type? This is too slow for my taste: Return DirectCast(Convert.ChangeType(myStr, GetType(T)), T) But it seems to be the only sane method of getting from a String -- T. I've tried using Reflector to see how Convert.ChangeType works, and while I can convert from the String to a given number type via a hacked-up version of that code, I have no idea how to jam that type back into T so it can be returned. I'll add that part of the speed penalty I'm seeing (in a timing loop) is because the return value is getting assigned to a Nullable(Of T) value. If I strongly-type my class for a specific number type (i.e., UInt16), then I can vastly increase the performance, but then the class would need to be duplicated for each numeric type that I use. It'd almost be nice if there was converter to/from T while working on it in a generic method/class. Maybe there is and I'm oblivious to its existence?

  Read the article

• Disable Products in different Magento Store Views

  - by Robert

  I have a Magento Multi-Store installation (not multi-site) and some products are available in more than one store. However, these products that are available in, let's say storeA and storeB, have related products, BUT, the related products are not available in both stores. The problem is this, Product1, which has Product2, Product3, and Product4 as related products, appears in storeA. No Problem. Product1 is also available in storeB, but NOT Product2-3-4. However, those products, though not shown in the general catalog of storeB, are visible as related products to Product1 in storeB. If I use the drop down to manage products in storeB, and I remove the related products in Product1, it removes the related products from Product1 in storeA, where they should be available. I cannot change the status attribute to storeview in Manage Attributes, because the only choices are Global or Website, not Store View. I can change the skin to show UPSELL products instead, and set up different UPSELL products, but that limits my stores to only two. Any ideas?

  Read the article

• How to handle ids and polymorphic associations in views if compound keys are not supported?

  - by duncan

  I have a Movie plan table: movie_plans (id, description) Each plan has items, which describe a sequence of movies and the duration in minutes: movie_plan_items (id, movie_plan_id, movie_id, start_minutes, end_minutes) A specific instance of that plan happens in: movie_schedules (id, movie_plan_id, start_at) However the schedule items can be calculated from the movie_plan_items and the schedule start time by adding the minutes create view movie_schedule_items as select CONCAT(p.id, '-', s.id) as id, s.id as movie_schedule_id, p.id as movie_plan_item_id, p.movie_id, p.movie_plan_id, (s.start_at + INTERVAL p.start_minutes MINUTE) as start_at, (s.start_at + INTERVAL p.end_minutes MINUTE) as end_at from movie_plan_items p, movie_schedules s where s.movie_plan_id=p.movie_plan_id; I have a model over this view (readonly), it works ok, except that the id is right now a string. I now want to add a polymorphic property (like comments) to various of the previous tables. Therefore for movie_schedule_items I need a unique and persistent numeric id. I have the following dilemma: I could avoid the id and have movie_schedule_items just use the movie_plan_id and movie_schedule_id as a compound key, as it should. But Rails sucks in this regard. I could create an id using String#hash or a md5, thus making it slower or collision prone (and IIRC String#hash is no longer persistent across processes in Ruby 1.9) Any ideas on how to handle this situation?

  Read the article

• Ordering z-indexes in an array

  - by Tom Gullen

  I have an array which looks something along the lines of resourceData[0][0] = "pic1.jpg"; resourceData[0][1] = 5; resourceData[1][0] = "pic2.jpg"; resourceData[1][1] = 2; resourceData[2][0] = "pic3.jpg"; resourceData[2][1] = 900; resourceData[3][0] = "pic4.jpg"; resourceData[3][1] = 1; The numeric represents the z-index of the image. Minimum z-index value is 1. Maximum (not really important) is 2000. I have all the rendering and setting z-indexes done fine. My question is, I want to have four functions: // Brings image to z front function bringToFront(resourceIndex) { // Set z-index to max + 1 resourceData[resourceIndex][1] = getBiggestZindex() + 1; // Change CSS property of image to bring to front $('#imgD' + resourceIndex).css("z-index", resourceData[resourceIndex][1]); } function bringUpOne(resourceIndex) { } function bringDownOne(resourceIndex) { } // Send to back z function sendToBack(resourceIndex) { } So given then index [3] (900 z): If we send it to the back, it will take the value 1, and [3] will have to go to 2, but that conflicts with [1] who has a 2 z-index so they need to go to three etc. Is there an easy programatical way of doing this because as soon as I start doing this it's going to get messy. It's important that the indexes of the array don't change. We can't sort the array unfortunately due to design. Update Thanks for answers, I'll post the functions here once they are written incase anyone comes across this in the future (note this code has zindex listed in [6]) // Send to back z function sendToBack(resourceIndex) { resourceData[resourceIndex][6] = 1; $('#imgD' + resourceIndex).css("z-index", 1); for (i = 0; i < resourceData.length; i++) { if (i != resourceIndex) { resourceData[i][6]++; $('#imgD' + i).css("z-index", resourceData[i][6]); } } }

  Read the article

• is_dir does not recognize folders

  - by Rakoon

  Hi I am trying to make a function that scans a folder for subfolders and then returns a numeric array with the names of those folders. This is the code i use for testing. Once i get it to print out the folder names and not just "." and ".." for present and above folder all will be well, and I can finish the function. <?php function super_l_getthemes($dir="themes") { if ($handle = opendir($dir)) { echo "Handle: {$handle}\n"; echo "Files:\n"; while (false !== ($file = readdir($handle))) { echo "{$file}<br>"; } closedir($handle); } ?> The above code works fine, and prints out all the contents of the folder: files, subfolders and the "." and ".." but if i replace: while (false !== ($file = readdir($handle))) { echo "{$file}<br>"; } with: while (false !== ($file = readdir($handle))) { if(file_exists($file) && is_dir($file)){echo "{$file}";} } The function only prints "." and ".." , not the two folder names that I'd like it to print. Any help is appreciated.

  Read the article

• Web UI element to represent two different micro-views of data in the same spot?

  - by Chris McCall

  I've been tasked with laying out a portion of a screen for a customer care (call center) app that serves as sort of a header/summary block at the top of the screen. Here's what it looks like: The important part is in the red box. That little tooltip is the biz's vision for how to represent both the numeric SiteId and the textual Site Name all in the same piece of screen real estate. I asked, and the business thinks the Name is more important than the ID, but lists the Id by default, because the Name can't be truncated in the display, and there's only so much horizontal room to put the data. So they go with the Id, because it's fewer characters, and then they have the user mouse-over the Id to display the name (presumably because the tooltip can be of unlimited width and since it's floating over the rest of the screen, the full name will always be displayed. So, here's my question: Is there some better UI metaphor that I don't know about that could get this job done, while meeting the following constraints?: Does not require the mouse (uses a keyboard shortcut to do the "reveal") Allows the user to copy and paste the name Will not truncate the name Provides for the display of both the ID and name in the same spot Works with IE7

  Read the article

• Is there an user-level accessible font table present in Linux?

  - by youngdood

  Hi again Stackoverflow! Since there is this: http://en.wikipedia.org/wiki/Code_page_437 For MSDOS, is there something similar for Linux systems? Is it possible to access that font data via userland program? I would actually just need an access to the actual bit patterns which define the font, and I would do the rendering myself. I'm fairly sure that something like this exists, but I haven't been able to find what exactly is it and how to access it. After all, e.g. text mode console font has to reside somewhere, and I really do hope it is "rawly" accessible somehow for a userland program. Before I forget, I'm programming my program in C, and have access only to the "standard" linux/posix development headers. The only thing I could came up with myself is to use the fonts in /usr/share/fonts, but having to write my own implementations to extract the data from there doesn't sound really an option; I would really want to achieve this with the least amount of bytes possible, so I feel I'm left with finding a standard way of doing this. It's not really feasible for me to store my own 8x8 ASCII-compatible font with the program either(it takes some 1024 bytes(128 chars * 8x8 bits) just to store the font, which is definitely unacceptable for the strict size limits(some < 1024 bytes for code+data) which I am working with), so being able to use the font data stored at the system itself would greatly simplify my task.

  Read the article

• Assistance with CC Processing script

  - by JM4

  I am currently implementing a credit card processing script, most as provided by the merchant gateway. The code calls functions within a class and returns a string based on the response. The end php code I am using (details removed of course) with example information is: <?php $gw = new gwapi; $gw->setLogin("username", "password"); $gw->setBilling("John","Smith","Acme, Inc.","888","Suite 200", "Beverly Hills", "CA","77777","US","555-555-5555","555-555-5556","[email protected]", "www.example.com"); // "CA","90210","US","[email protected]"); $gw->setOrder("1234","Big Order",1, 2, "PO1234","65.192.14.10"); $r = $gw->doSale("1.00","4111111111111111","1010"); print $gw->responses['responsetext']; ?> where setlogin allows me to login, setbilling takes the sample consumer information, set order takes the order id and description, dosale takes the amount charged, cc number and exp date. when all the variables are sent validated then sent off for processing, a string is returned in the following format: response=1&responsetext=SUCCESS&authcode=123456&transactionid=23456&avsresponse=M&orderid=&type=sale&response_code=100 where: response = transaction approved or declined response text = textual response authcode = transaction authorization code transactionid = payment gateway tran id avsresponse = avs response code orderid = original order id passed in tran request response_code = numeric mapping of processor response I am trying to solve for the following: How do I take the data which is passed back and display it appropriately on the page - If the transaction failed or AVS code doesnt match my liking or something is wrong, an error is displayed to the consumer; if the transaction processed, they are taken to a completion page and the transaction id is sent in SESSION as output to the consumer If the response_code value matches a table of values, certain actions are taken, i.e. if code =100, take to success page, if code = 300 print specific error on original page to customer, etc.

  Read the article

• JavaScript Key Codes

  - by Jonathan Wood

  I'm working with a JavaScript routine I didn't write. It is called from a text box's onkeydown attribute to prevent unwanted keystrokes. The first argument is apparently not used. The second argument is a list of characters that should be allowed. function RestrictChars(evt, chars) { var key; var keychar; if (window.event) key = window.event.keyCode; else if (e) key = e.which; else return true; keychar = String.fromCharCode(key); if ((key == null) || (key == 0) || (key == 8) || (key == 9) || (key == 13) || (key == 27)) // Control key return true; else if (((chars).indexOf(keychar) > -1)) return true; else return false; } This seems to work for alpha-numeric characters. However, characters such as . and / cause this function to return false, even when these characters are included in the chars parameter. For example, if the . key is pressed, key is set to 190, and keychar gets set to the "3/4" character. Can anyone see how this was meant to work and/or why it doesn't? I don't know enough about JavaScript to see what it's trying to do.

  Read the article

• Perl need the right grep operator to match value of variable

  - by iaintunderstand

  I want to see if I have repeated items in my array, there are over 16.000 so will automate it There may be other ways but I started with this and, well, would like to finish it unless there is a straightforward command. What I am doing is shifting and pushing from one array into another and this way, check the destination array to see if it is "in array" (like there is such a command in PHP). So, I got this sub routine and it works with literals, but it doesn't with variables. It is because of the 'eq' or whatever I should need. The 'sourcefile' will contain one or more of the words of the destination array. my @destination = ('hi', 'bye'); sub in_array { my ($destination,$search_for) = @_; return grep {$search_for eq $_} @$destination; } for($i = 0; $i <=100; $i ++) { $elemento = shift @sourcefile; if(in_array(\@destination, $elemento)) { print "it is"; } else { print "it aint there"; } } Well, if instead of including the $elemento in there I put a 'hi' it does work and also I have printed the value of $elemento which is also 'hi', but when I put the variable, it does not work, and that is because of the 'eq', but I don't know what else to put. If I put == it complains that 'hi' is not a numeric value.

  Read the article

• Optimal (Time paradigm) solution to check variable within boundary

  - by kumar_m_kiran

  Hi All, Sorry if the question is very naive. I will have to check the below condition in my code 0 < x < y i.e code similar to if(x > 0 && x < y) The basic problem at system level is - currently, for every call (Telecom domain terminology), my existing code is hit (many times). So performance is very very critical, Now, I need to add a check for boundary checking (at many location - but different boundary comparison at each location). At very normal level of coding, the above comparison would look very naive without any issue. However, when added over my statistics module (which is dipped many times), performance will go down. So I would like to know the best possible way to handle the above scenario (kind of optimal way for limits checking technique). Like for example, if bit comparison works better than normal comparison or can both the comparison be evaluation in shorter time span? Other Info x is unsigned integer (which must be checked to be greater than 0 and less than y). y is unsigned integer. y is a non-const and varies for every comparison. Here time is the constraint compared to space. Language - C++. Now, later if I need to change the attribute of y to a float/double, would there be another way to optimize the check (i.e will the suggested optimal technique for integer become non-optimal solution when y is changed to float/double). Thanks in advance for any input. PS : OS used is SUSE 10 64 bit x64_64, AIX 5.3 64 bit, HP UX 11.1 A 64.

  Read the article

• PHP download script for "processes running limited" hosting (eg. hostgator)

  - by Joe

  I am currently with HostGator on a shared hosting plan. I have a new website I'm trying to setup with a download.php script. The issue I am having is that, while someone is "downloading" a file through the download.php script, it counts as a "process" and my hosting plan limits the processes that can be running at the same time to 25 at present. My question is, what options do I have? a). Move to new web hosting that doesn't limit processes running. b). Change the way files are downloaded. I would like to choose option b), however it occurs to me that I need to have the file accessed through PHP in order to restrict the number of downloads and to track download statistics, as well as protecting against hotlinking. If there was a way to have the PHP script send them the file so that the process doesn't need to be running the whole time the file is being downloaded, I would eliminate the problem, however to my knowledge that isn't possible. Should I make the move to a new hosting company? I really enjoy HostGator as they have provided the best hosting experience for me thus far, except for this one issue of course, so I don't want to go on the hunt for another decent shared hosting company that doesn't limit processes running, only to find out there is another restriction or "catch" to the shared hosting deal.

  Read the article

• Transfering data from Excel to dataGridView

  - by Panecillo

  I have a problem when I want to transfer data from Excel to dataGridView in C#. My Excel's column has numeric and alphanumeric values. But for example, if the column has 3 numbers and 2 alphanumeric values then only the numbers are shown in the dataGridView, and vice versa. Why aren't all the values shown? The next is what happen: Excel's Column: DataGridView's Column: 45654 45654 P745K 31233 31233 23111 23111 45X2Y Here is my code to load the dataGridView: string connectionString = @"Provider=Microsoft.Jet.OLEDB.4.0;Data Source=D:\test.xls;Extended Properties=""Excel 8.0;HDR=YES;"""; DbProviderFactory factory = DbProviderFactories.GetFactory("System.Data.OleDb"); DbDataAdapter adapter = factory.CreateDataAdapter(); DbCommand selectCommand = factory.CreateCommand(); selectCommand.CommandText = "SELECT * FROM [sheet1$]"; DbConnection connection = factory.CreateConnection(); connection.ConnectionString = connectionString; selectCommand.Connection = connection; adapter.SelectCommand = selectCommand; data = new DataSet(); adapter.Fill(data); dataGridView1.DataSource = data.Tables[0].DefaultView; I hope I explained it well. Sorry my bad english. Thanks.

  Read the article

• SAS V9.1.3 - Error when combining %INC and CALL EXECUTE

  - by Mark

  Hi, I am getting a resolution error with some SAS v9.1.3 code. Here is some code I want to store in a .txt file (called problem2.txt) and bring into SAS with a %INC %macro email020; %if &email = 1 %then %do; %put THIS RESOLVED AT 1; %end; %else %if &email = 2 %then %do; %put THIS RESOVLED AT 2; %end; %put _user_; %mend email020; %email020; Then this is the main code: filename problem2 'C:\Documents and Settings\Mark\My Documents\problem2.txt'; %macro report1; %let email = 1; %inc problem2; %mend report1; %macro report2 (inc); %let email = 2; %inc problem2; %mend report2; data test; run = 'YES'; run; data _null_; set test; call execute("%report1"); call execute("%report2"); run; The log shows: NOTE: CALL EXECUTE generated line. 1 + %inc problem2; MLOGIC(EMAIL020): Beginning execution. WARNING: Apparent symbolic reference EMAIL not resolved. ERROR: A character operand was found in the %EVAL function or %IF condition where a numeric operand is required. The condition was: &email = 1 ERROR: The macro EMAIL020 will stop executing. MLOGIC(EMAIL020): Ending execution. So the question is why does CALL EXECUTE generate %inc problem2 rather than %report1, causing SAS to miss the assignment and what can I do about it?

  Read the article

• Page specific CSS or a single css file when developing a mobile (webkit) based site?

  - by Mike

  I am working on a mobile site for webkit browsers. I have been trying to find information on using multiple style sheets versus a single css file. There is a lot of information on this topic, but it not a lot of information pertaining to mobile browsers. My site will have a bunch of pages that while have page specific css. For a non-mobile site, it seems like generally people say that a single file will be faster, but that multiple files are easier to develop. However, on a mobile site is that still the case? If you put everything in one file, that will get cached after load, but that will make the first load slower. If you had page specific files, the first page would get loaded quicker, but every other page would then take a hit while making the page specific css http request. Does anyone have any thoughts on this? It sounds like they are saying one file is better as long as its under 1 MB (which my files def will)? http://www.yuiblog.com/blog/2010/07/12/mobile-browser-cache-limits-revisited/

  Read the article

• method works fine, until it is called in a function, then UnboundLocalError

  - by user1776100

  I define a method called dist, to calculate the distance between two points which I does it correctly when directly using the method. However, when I get a function to call it to calculate the distance between two points, I get UnboundLocalError: local variable 'minkowski_distance' referenced before assignment edit sorry, I just realised, this function does work. However I have another method calling it that doesn't. I put the last method at the bottom This is the method: class MinkowskiDistance(Distance): def __init__(self, dist_funct_name_str = 'Minkowski distance', p=2): self.p = p def dist(self, obj_a, obj_b): distance_to_power_p=0 p=self.p for i in range(len(obj_a)): distance_to_power_p += abs((obj_a[i]-obj_b[i]))**(p) minkowski_distance = (distance_to_power_p)**(1/p) return minkowski_distance and this is the function: (it basically splits the tuples x and y into their number and string components and calculates the distance between the numeric part of x and y and then the distance between the string parts, then adds them. def total_dist(x, y, p=2, q=2): jacard = QGramDistance(q=q) minkowski = MinkowskiDistance(p=p) x_num = [] x_str = [] y_num = [] y_str = [] #I am spliting each vector into its numerical parts and its string parts so that the distances #of each part can be found, then summed together. for i in range(len(x)): if type(x[i]) == float or type(x[i]) == int: x_num.append(x[i]) y_num.append(y[i]) else: x_str.append(x[i]) y_str.append(y[i]) num_dist = minkowski.dist(x_num,y_num) str_dist = I find using some more steps #I am simply adding the two types of distance to get the total distance: return num_dist + str_dist class NearestNeighbourClustering(Clustering): def __init__(self, data_file, clust_algo_name_str='', strip_header = "no", remove = -1): self.data_file= data_file self.header_strip = strip_header self.remove_column = remove def run_clustering(self, max_dist, p=2, q=2): K = {} #dictionary of clusters data_points = self.read_data_file() K[0]=[data_points[0]] k=0 #I added the first point in the data to the 0th cluster #k = number of clusters minus 1 n = len(data_points) for i in range(1,n): data_point_in_a_cluster = "no" for c in range(k+1): distances_from_i = [total_dist(data_points[i],K[c][j], p=p, q=q) for j in range(len(K[c]))] d = min(distances_from_i) if d <= max_dist: K[c].append(data_points[i]) data_point_in_a_cluster = "yes" if data_point_in_a_cluster == "no": k += 1 K[k]=[data_points[i]] return K

  Read the article

• Textbox time validations (javascript)

  - by unos

  I have a textbox in which user can enter time (eg- 01:00) and also a drop down box for entering AM/PM fields. (Since the AM/PM field is used, 12-hour time format is used.) The text box allows a max entry of 5 chars only (eg - 01:00). Pls let me know how I can set the 3rd char as a default -colon : , so that the user simply has to enter only the time. How to check if the time entered by the user is numeric or not?. Autocompletion feature : for eg, if user enters 1 then it would automatically be set to 01:00 Javascript Validations for 12-hour format. Eg: if user enters 13:00 then it should change to 01:00 How can I append the text box time values with the am/pm value selected in the drop down box?. Once the values are appended, automatically populate another text box (text box 2) with the result. Eg: 01:00 + pm should be set as 01:00p in the new text box (text box 2). Any help would be appreciated.

  Read the article

• 'area' not declared in this scope

  - by user1641173

  I've just started learning c++ and am trying to write a program for finding the area of a circle. I've written the program and whenever I try to compile it I get 2 error messages. The first is: areaofcircle.cpp:9:14: error: expected unqualified-id before numeric constant and the second is: areaofcircle.cpp:18:5: error: 'area' was not declared in this scope What should I do? I would post a picture, but I'm a new user, so I can't. #include <iostream> using namespace std; #define pi 3.1415926535897932384626433832795 int main() { // Create three float variable values: r, pi, area float r, pi, area; cout << "This program computes the area of a circle." << endl; // Prompt user to enter the radius of the circle, read input value into variable r cout << "Enter the radius of the circle " << endl; cin >> r; // Square r and then multiply by pi area = r * r * pi; cout << "The area is " << area << "." << endl; }

  Read the article

• How do I add two lists in Linq so addedList[x] = listOne[x] + listTwo[x]?

  - by Audie

  I want to add two lists of a numeric type such that addedList[x] = listOne[x] + listTwo[x] The output of the list needs to be a Generic.IEnumerable that I can use in future linq queries. While I was able to do it using the code below, I can't help but feel like there must be a better way. Any ideas? List<int> firstList = new List<int>(new int[] { 1, 3, 4, 2, 5, 7, 2, 5, 7, 8, 9, 0 }); List<int> secondList = new List<int>(new int[] { 4, 6, 8, 3, 1, 5, 9, 3, 0 }); int findex = 0; ILookup<int, int> flookup = firstList.ToLookup(f => { int i = findex; findex++; return i; }, p => p); var listsAdded = from grp in flookup select grp.First() + secondList.ElementAtOrDefault(grp.Key); foreach (int i in listsAdded) Console.WriteLine(i);

  Read the article

• 'table' undeclared (first use this in a function)

  - by user2318083

  So I'm not sure why this isn't working, I'm creating a new table and setting it to the variable 'table' Is there something I'm doing wrong? This is the error I get when trying to run it: src/simpleshell.c:19:3: error: ‘table’ undeclared (first use in this function) src/simpleshell.c:19:3: note: each undeclared identifier is reported only once for each function it appears in My code is as follows: #include "parser.h" #include "hash_table.h" #include "variables.h" #include "shell.h" #include <stdio.h> int main(void) { char input[MAXINPUTLINE]; table = Table_create(); signal_c_init(); printf("\nhlsh$ "); while(fgets(input, sizeof(input), stdin)){ stripcrlf(input); parse(input); printf("\nhlsh$ "); } Table_free(table); return 0; } Then this is my create a table in the hash_table file: struct Table *Table_create(void){ struct Table *t; t = (struct Table*)calloc(1, sizeof(struct Table)); return t; } From the hash_table.c: #include "hash_table.h" #include "parser.h" #include "shell.h" #include "variables.h" #include <stdio.h> #include <sys/resource.h> #include <sys/wait.h> #include <sys/types.h> #include <stdlib.h> #include <string.h> #include <unistd.h> #include <pwd.h> #include <fcntl.h> #include <limits.h> #include <signal.h> struct Table *table; unsigned int hash(const char *x){ int i; unsigned int h = 0U; for (i=0; x[i]!='\0'; i++){ h = h * 65599 + (unsigned char)x[i]; } return h % 1024; }

  Read the article

• free open-source linux screenshot & ocr tool

  - by Gryllida

  I'm looking for a tool which would be able to capture a screen region, pass it to OCR and put the result into clipboard. "import ppm:- | gocr -i - | xclip -selection c" works, but gocr is unreliable: simple text on a webpage has errors. It is a clear font but the OCR tool always misses "r" and replaces it with underscore. "import ppm:- | ocrad -i - | xclip -selection c" says "ocrad: maxval 255 in ppm "P6" file." tesseract needs an image file and does not accept piping input to it. xfce4-screenshooter does not do OCR. ABBYY Screenshot Reader is proprietary. tessnet2 is freeware running on a proprietary platform. Google Docs can OCR screenshots in a batch. But my data is confidential and better not put online. Graphical interface solutions would be acceptable for this question, too. There is a number of existing SuperUser questions about OCR. They fall in several categories. Questions just about OCR without the "screenshot taking" part. Open Source OCR for linux Free OCR for Arabic text Looking for recommendations on OCR problem - tabular numeric data Which has better OCR applications: Ubuntu, or Mac/iPad, or Windows? How can I preform OCR from the command line? OCR solution on linux machine from command line (duplicate) Free OCR software OCR for Sanskrit ( OR devanagari) Copy image and paste to OCR (windows) File processing OCR instead of screenshot. Online OCR website for processing an entire pdf file at one time? Practical OCR solution for converting a large book to a digital format? How to extract text with OCR from a PDF on Linux? Batch-OCR many PDFs OCR Image based PDF Copy image and paste to OCR Extract OCR text from Evernote OCR in Word 2013 Replace (OCR) garbled text in PDF? Process files prior to running OCR. How can I make OCR recognize my documents' text better? Tesseract OCR recognition bilingual document. mistakes tolerance level setup OCR for low quality images How do I get the best quality screenshot for OCR (Optical Character Recognition) and what tool would be the best for screenshots? OCR training. Training Tesseract-OCR for english language fonts None of them answer this question.

  Read the article

• Sendmail Failing to Forward Locally Addressed Mail to Exchange Server

  - by DomainSoil

  I've recently gained employment as a web developer with a small company. What they neglected to tell me upon hire was that I would be administrating the server along with my other daily duties. Now, truth be told, I'm not clueless when it comes to these things, but this is my first rodeo working with a rack server/console.. However, I'm confident that I will be able to work through any solutions you provide. Short Description: When a customer places an order via our (Magento CE 1.8.1.0) website, a copy of said order is supposed to be BCC'd to our sales manager. I say supposed because this was a working feature before the old administrator left. Long Description: Shortly after I started, we had a server crash which required a server restart. After restart, we noticed a few features on our site weren't working, but all those have been cleaned up except this one. I had to create an account on our server for root access. When a customer places an order, our sites software (Magento CE 1.8.1.0) is configured to BCC the customers order email to our sales manager. We use a Microsoft Exchange 2007 Server for our mail, which is hosted on a different machine (in-house) that I don't have access to ATM, but I'm sure I could if needed. As far as I can tell, all other external emails work.. Only INTERNAL email addresses fail to deliver. I know this because I've also tested my own internal address via our website. I set up an account with an internal email, made a test order, and never received the email. I changed my email for the account to an external GMail account, and received emails as expected. Let's dive into the logs and config's. For privacy/security reasons, names have been changed to the following: domain.com = Our Top Level Domain. email.local = Our Exchange Server. example.com = ANY other TLD. OLDadmin = Our previous Server Administrator. NEWadmin = Me. SALES@ = Our Sales Manager. Customer# = A Customer. Here's a list of the programs and config files used that hold relevant for this issue: Server: > [root@www ~]# cat /etc/centos-release CentOS release 6.3 (final) Sendmail: > [root@www ~]# sendmail -d0.1 -bt < /dev/null Version 8.14.4 ========SYSTEM IDENTITY (after readcf)======== (short domain name) $w = domain (canonical domain name) $j = domain.com (subdomain name) $m = com (node name) $k = www.domain.com > [root@www ~]# rpm -qa | grep -i sendmail sendmail-cf-8.14.4-8.e16.noarch sendmail-8.14-4-8.e16.x86_64 nslookup: > [root@www ~]# nslookup email.local Name: email.local Address: 192.168.1.50 hostname: > [root@www ~]# hostname www.domain.com /etc/mail/access: > [root@www ~]# vi /etc/mail/access Connect:localhost.localdomain RELAY Connect:localhost RELAY Connect:127.0.0.1 RELAY /etc/mail/domaintable: > [root@www ~]# vi /etc/mail/domaintable # /etc/mail/local-host-names: > [root@www ~]# vi /etc/mail/local-host-names # /etc/mail/mailertable: > [root@www ~]# vi /etc/mail/mailertable # /etc/mail/sendmail.cf: > [root@www ~]# vi /etc/mail/sendmail.cf ###################################################################### ##### ##### DO NOT EDIT THIS FILE! Only edit the source .mc file. ##### ###################################################################### ###################################################################### ##### $Id: cfhead.m4,v 8.120 2009/01/23 22:39:21 ca Exp $ ##### ##### $Id: cf.m4,v 8.32 1999/02/07 07:26:14 gshapiro Exp $ ##### ##### setup for linux ##### ##### $Id: linux.m4,v 8.13 2000/09/17 17:30:00 gshapiro Exp $ ##### ##### $Id: local_procmail.m4,v 8.22 2002/11/17 04:24:19 ca Exp $ ##### ##### $Id: no_default_msa.m4,v 8.2 2001/02/14 05:03:22 gshapiro Exp $ ##### ##### $Id: smrsh.m4,v 8.14 1999/11/18 05:06:23 ca Exp $ ##### ##### $Id: mailertable.m4,v 8.25 2002/06/27 23:23:57 gshapiro Exp $ ##### ##### $Id: virtusertable.m4,v 8.23 2002/06/27 23:23:57 gshapiro Exp $ ##### ##### $Id: redirect.m4,v 8.15 1999/08/06 01:47:36 gshapiro Exp $ ##### ##### $Id: always_add_domain.m4,v 8.11 2000/09/12 22:00:53 ca Exp $ ##### ##### $Id: use_cw_file.m4,v 8.11 2001/08/26 20:58:57 gshapiro Exp $ ##### ##### $Id: use_ct_file.m4,v 8.11 2001/08/26 20:58:57 gshapiro Exp $ ##### ##### $Id: local_procmail.m4,v 8.22 2002/11/17 04:24:19 ca Exp $ ##### ##### $Id: access_db.m4,v 8.27 2006/07/06 21:10:10 ca Exp $ ##### ##### $Id: blacklist_recipients.m4,v 8.13 1999/04/02 02:25:13 gshapiro Exp $ ##### ##### $Id: accept_unresolvable_domains.m4,v 8.10 1999/02/07 07:26:07 gshapiro Exp $ ##### ##### $Id: masquerade_envelope.m4,v 8.9 1999/02/07 07:26:10 gshapiro Exp $ ##### ##### $Id: masquerade_entire_domain.m4,v 8.9 1999/02/07 07:26:10 gshapiro Exp $ ##### ##### $Id: proto.m4,v 8.741 2009/12/11 00:04:53 ca Exp $ ##### # level 10 config file format V10/Berkeley # override file safeties - setting this option compromises system security, # addressing the actual file configuration problem is preferred # need to set this before any file actions are encountered in the cf file #O DontBlameSendmail=safe # default LDAP map specification # need to set this now before any LDAP maps are defined #O LDAPDefaultSpec=-h localhost ################## # local info # ################## # my LDAP cluster # need to set this before any LDAP lookups are done (including classes) #D{sendmailMTACluster}$m Cwlocalhost # file containing names of hosts for which we receive email Fw/etc/mail/local-host-names # my official domain name # ... define this only if sendmail cannot automatically determine your domain #Dj$w.Foo.COM # host/domain names ending with a token in class P are canonical CP. # "Smart" relay host (may be null) DSemail.local # operators that cannot be in local usernames (i.e., network indicators) CO @ % ! # a class with just dot (for identifying canonical names) C.. # a class with just a left bracket (for identifying domain literals) C[[ # access_db acceptance class C{Accept}OK RELAY C{ResOk}OKR # Hosts for which relaying is permitted ($=R) FR-o /etc/mail/relay-domains # arithmetic map Karith arith # macro storage map Kmacro macro # possible values for TLS_connection in access map C{Tls}VERIFY ENCR # who I send unqualified names to if FEATURE(stickyhost) is used # (null means deliver locally) DRemail.local. # who gets all local email traffic # ($R has precedence for unqualified names if FEATURE(stickyhost) is used) DHemail.local. # dequoting map Kdequote dequote # class E: names that should be exposed as from this host, even if we masquerade # class L: names that should be delivered locally, even if we have a relay # class M: domains that should be converted to $M # class N: domains that should not be converted to $M #CL root C{E}root C{w}localhost.localdomain C{M}domain.com # who I masquerade as (null for no masquerading) (see also $=M) DMdomain.com # my name for error messages DnMAILER-DAEMON # Mailer table (overriding domains) Kmailertable hash -o /etc/mail/mailertable.db # Virtual user table (maps incoming users) Kvirtuser hash -o /etc/mail/virtusertable.db CPREDIRECT # Access list database (for spam stomping) Kaccess hash -T<TMPF> -o /etc/mail/access.db # Configuration version number DZ8.14.4 /etc/mail/sendmail.mc: > [root@www ~]# vi /etc/mail/sendmail.mc divert(-1)dnl dnl # dnl # This is the sendmail macro config file for m4. If you make changes to dnl # /etc/mail/sendmail.mc, you will need to regenerate the dnl # /etc/mail/sendmail.cf file by confirming that the sendmail-cf package is dnl # installed and then performing a dnl # dnl # /etc/mail/make dnl # include(`/usr/share/sendmail-cf/m4/cf.m4')dnl VERSIONID(`setup for linux')dnl OSTYPE(`linux')dnl dnl # dnl # Do not advertize sendmail version. dnl # dnl define(`confSMTP_LOGIN_MSG', `$j Sendmail; $b')dnl dnl # dnl # default logging level is 9, you might want to set it higher to dnl # debug the configuration dnl # dnl define(`confLOG_LEVEL', `9')dnl dnl # dnl # Uncomment and edit the following line if your outgoing mail needs to dnl # be sent out through an external mail server: dnl # define(`SMART_HOST', `email.local')dnl dnl # define(`confDEF_USER_ID', ``8:12'')dnl dnl define(`confAUTO_REBUILD')dnl define(`confTO_CONNECT', `1m')dnl define(`confTRY_NULL_MX_LIST', `True')dnl define(`confDONT_PROBE_INTERFACES', `True')dnl define(`PROCMAIL_MAILER_PATH', `/usr/bin/procmail')dnl define(`ALIAS_FILE', `/etc/aliases')dnl define(`STATUS_FILE', `/var/log/mail/statistics')dnl define(`UUCP_MAILER_MAX', `2000000')dnl define(`confUSERDB_SPEC', `/etc/mail/userdb.db')dnl define(`confPRIVACY_FLAGS', `authwarnings,novrfy,noexpn,restrictqrun')dnl define(`confAUTH_OPTIONS', `A')dnl dnl # dnl # The following allows relaying if the user authenticates, and disallows dnl # plaintext authentication (PLAIN/LOGIN) on non-TLS links dnl # dnl define(`confAUTH_OPTIONS', `A p')dnl dnl # dnl # PLAIN is the preferred plaintext authentication method and used by dnl # Mozilla Mail and Evolution, though Outlook Express and other MUAs do dnl # use LOGIN. Other mechanisms should be used if the connection is not dnl # guaranteed secure. dnl # Please remember that saslauthd needs to be running for AUTH. dnl # dnl TRUST_AUTH_MECH(`EXTERNAL DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl define(`confAUTH_MECHANISMS', `EXTERNAL GSSAPI DIGEST-MD5 CRAM-MD5 LOGIN PLAIN')dnl dnl # dnl # Rudimentary information on creating certificates for sendmail TLS: dnl # cd /etc/pki/tls/certs; make sendmail.pem dnl # Complete usage: dnl # make -C /etc/pki/tls/certs usage dnl # dnl define(`confCACERT_PATH', `/etc/pki/tls/certs')dnl dnl define(`confCACERT', `/etc/pki/tls/certs/ca-bundle.crt')dnl dnl define(`confSERVER_CERT', `/etc/pki/tls/certs/sendmail.pem')dnl dnl define(`confSERVER_KEY', `/etc/pki/tls/certs/sendmail.pem')dnl dnl # dnl # This allows sendmail to use a keyfile that is shared with OpenLDAP's dnl # slapd, which requires the file to be readble by group ldap dnl # dnl define(`confDONT_BLAME_SENDMAIL', `groupreadablekeyfile')dnl dnl # dnl define(`confTO_QUEUEWARN', `4h')dnl dnl define(`confTO_QUEUERETURN', `5d')dnl dnl define(`confQUEUE_LA', `12')dnl dnl define(`confREFUSE_LA', `18')dnl define(`confTO_IDENT', `0')dnl dnl FEATURE(delay_checks)dnl FEATURE(`no_default_msa', `dnl')dnl FEATURE(`smrsh', `/usr/sbin/smrsh')dnl FEATURE(`mailertable', `hash -o /etc/mail/mailertable.db')dnl FEATURE(`virtusertable', `hash -o /etc/mail/virtusertable.db')dnl FEATURE(redirect)dnl FEATURE(always_add_domain)dnl FEATURE(use_cw_file)dnl FEATURE(use_ct_file)dnl dnl # dnl # The following limits the number of processes sendmail can fork to accept dnl # incoming messages or process its message queues to 20.) sendmail refuses dnl # to accept connections once it has reached its quota of child processes. dnl # dnl define(`confMAX_DAEMON_CHILDREN', `20')dnl dnl # dnl # Limits the number of new connections per second. This caps the overhead dnl # incurred due to forking new sendmail processes. May be useful against dnl # DoS attacks or barrages of spam. (As mentioned below, a per-IP address dnl # limit would be useful but is not available as an option at this writing.) dnl # dnl define(`confCONNECTION_RATE_THROTTLE', `3')dnl dnl # dnl # The -t option will retry delivery if e.g. the user runs over his quota. dnl # FEATURE(local_procmail, `', `procmail -t -Y -a $h -d $u')dnl FEATURE(`access_db', `hash -T<TMPF> -o /etc/mail/access.db')dnl FEATURE(`blacklist_recipients')dnl EXPOSED_USER(`root')dnl dnl # dnl # For using Cyrus-IMAPd as POP3/IMAP server through LMTP delivery uncomment dnl # the following 2 definitions and activate below in the MAILER section the dnl # cyrusv2 mailer. dnl # dnl define(`confLOCAL_MAILER', `cyrusv2')dnl dnl define(`CYRUSV2_MAILER_ARGS', `FILE /var/lib/imap/socket/lmtp')dnl dnl # dnl # The following causes sendmail to only listen on the IPv4 loopback address dnl # 127.0.0.1 and not on any other network devices. Remove the loopback dnl # address restriction to accept email from the internet or intranet. dnl # DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl dnl # dnl # The following causes sendmail to additionally listen to port 587 for dnl # mail from MUAs that authenticate. Roaming users who can't reach their dnl # preferred sendmail daemon due to port 25 being blocked or redirected find dnl # this useful. dnl # dnl DAEMON_OPTIONS(`Port=submission, Name=MSA, M=Ea')dnl dnl # dnl # The following causes sendmail to additionally listen to port 465, but dnl # starting immediately in TLS mode upon connecting. Port 25 or 587 followed dnl # by STARTTLS is preferred, but roaming clients using Outlook Express can't dnl # do STARTTLS on ports other than 25. Mozilla Mail can ONLY use STARTTLS dnl # and doesn't support the deprecated smtps; Evolution <1.1.1 uses smtps dnl # when SSL is enabled-- STARTTLS support is available in version 1.1.1. dnl # dnl # For this to work your OpenSSL certificates must be configured. dnl # dnl DAEMON_OPTIONS(`Port=smtps, Name=TLSMTA, M=s')dnl dnl # dnl # The following causes sendmail to additionally listen on the IPv6 loopback dnl # device. Remove the loopback address restriction listen to the network. dnl # dnl DAEMON_OPTIONS(`port=smtp,Addr=::1, Name=MTA-v6, Family=inet6')dnl dnl # dnl # enable both ipv6 and ipv4 in sendmail: dnl # dnl DAEMON_OPTIONS(`Name=MTA-v4, Family=inet, Name=MTA-v6, Family=inet6') dnl # dnl # We strongly recommend not accepting unresolvable domains if you want to dnl # protect yourself from spam. However, the laptop and users on computers dnl # that do not have 24x7 DNS do need this. dnl # FEATURE(`accept_unresolvable_domains')dnl dnl # dnl FEATURE(`relay_based_on_MX')dnl dnl # dnl # Also accept email sent to "localhost.localdomain" as local email. dnl # LOCAL_DOMAIN(`localhost.localdomain')dnl dnl # dnl # The following example makes mail from this host and any additional dnl # specified domains appear to be sent from mydomain.com dnl # MASQUERADE_AS(`domain.com')dnl dnl # dnl # masquerade not just the headers, but the envelope as well dnl FEATURE(masquerade_envelope)dnl dnl # dnl # masquerade not just @mydomainalias.com, but @*.mydomainalias.com as well dnl # FEATURE(masquerade_entire_domain)dnl dnl # MASQUERADE_DOMAIN(domain.com)dnl dnl MASQUERADE_DOMAIN(localhost.localdomain)dnl dnl MASQUERADE_DOMAIN(mydomainalias.com)dnl dnl MASQUERADE_DOMAIN(mydomain.lan)dnl MAILER(smtp)dnl MAILER(procmail)dnl dnl MAILER(cyrusv2)dnl /etc/mail/trusted-users: > [root@www ~]# vi /etc/mail/trusted-users # /etc/mail/virtusertable: > [root@www ~]# vi /etc/mail/virtusertable [email protected] [email protected] [email protected] [email protected] /etc/hosts: > [root@www ~]# vi /etc/hosts 127.0.0.1 localhost.localdomain localhost ::1 localhost6.localdomain6 localhost6 192.168.1.50 email.local I've only included the "local info" part of sendmail.cf, to save space. If there are any files that I've missed, please advise so I may produce them. Now that that's out of the way, lets look at some entries from /var/log/maillog. The first entry is from an order BEFORE the crash, when the site was working as expected. ##Order 200005374 Aug 5, 2014 7:06:38 AM## Aug 5 07:06:39 www sendmail[26149]: s75C6dqB026149: from=OLDadmin, size=11091, class=0, nrcpts=2, msgid=<[email protected]>, relay=OLDadmin@localhost Aug 5 07:06:39 www sendmail[26150]: s75C6dXe026150: from=<[email protected]>, size=11257, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 07:06:39 www sendmail[26149]: s75C6dqB026149: [email protected],=?utf-8?B?dGhvbWFzICBHaWxsZXNwaWU=?= <[email protected]>, ctladdr=OLDadmin (501/501), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=71091, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75C6dXe026150 Message accepted for delivery) Aug 5 07:06:40 www sendmail[26152]: s75C6dXe026150: to=<[email protected]>,<[email protected]>, delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=161257, relay=email.local. [192.168.1.50], dsn=2.0.0, stat=Sent ( <[email protected]> Queued mail for delivery) This next entry from maillog is from an order AFTER the crash. ##Order 200005375 Aug 5, 2014 9:45:25 AM## Aug 5 09:45:26 www sendmail[30021]: s75EjQ4O030021: from=OLDadmin, size=11344, class=0, nrcpts=2, msgid=<[email protected]>, relay=OLDadmin@localhost Aug 5 09:45:26 www sendmail[30022]: s75EjQm1030022: <[email protected]>... User unknown Aug 5 09:45:26 www sendmail[30021]: s75EjQ4O030021: [email protected], ctladdr=OLDadmin (501/501), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=71344, relay=[127.0.0.1] [127.0.0.1], dsn=5.1.1, stat=User unknown Aug 5 09:45:26 www sendmail[30022]: s75EjQm1030022: from=<[email protected]>, size=11500, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:45:26 www sendmail[30021]: s75EjQ4O030021: to==?utf-8?B?S2VubmV0aCBCaWViZXI=?= <[email protected]>, ctladdr=OLDadmin (501/501), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=71344, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75EjQm1030022 Message accepted for delivery) Aug 5 09:45:26 www sendmail[30021]: s75EjQ4O030021: s75EjQ4P030021: DSN: User unknown Aug 5 09:45:26 www sendmail[30022]: s75EjQm3030022: <[email protected]>... User unknown Aug 5 09:45:26 www sendmail[30021]: s75EjQ4P030021: to=OLDadmin, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=42368, relay=[127.0.0.1] [127.0.0.1], dsn=5.1.1, stat=User unknown Aug 5 09:45:26 www sendmail[30022]: s75EjQm3030022: from=<>, size=12368, class=0, nrcpts=0, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:45:26 www sendmail[30021]: s75EjQ4P030021: s75EjQ4Q030021: return to sender: User unknown Aug 5 09:45:26 www sendmail[30022]: s75EjQm5030022: from=<>, size=14845, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:45:26 www sendmail[30021]: s75EjQ4Q030021: to=postmaster, delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=43392, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75EjQm5030022 Message accepted for delivery) Aug 5 09:45:26 www sendmail[30025]: s75EjQm5030022: to=root, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=45053, dsn=2.0.0, stat=Sent Aug 5 09:45:27 www sendmail[30024]: s75EjQm1030022: to=<[email protected]>, delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=131500, relay=email.local. [192.168.1.50], dsn=2.0.0, stat=Sent ( <[email protected]> Queued mail for delivery) To add a little more, I think I've pinpointed the actual crash event. ##THE CRASH## Aug 5 09:39:46 www sendmail[3251]: restarting /usr/sbin/sendmail due to signal Aug 5 09:39:46 www sm-msp-queue[3260]: restarting /usr/sbin/sendmail due to signal Aug 5 09:39:46 www sm-msp-queue[29370]: starting daemon (8.14.4): queueing@01:00:00 Aug 5 09:39:47 www sendmail[29372]: starting daemon (8.14.4): SMTP+queueing@01:00:00 Aug 5 09:40:02 www sendmail[29465]: s75Ee2vT029465: Authentication-Warning: www.domain.com: OLDadmin set sender to root using -f Aug 5 09:40:02 www sendmail[29464]: s75Ee2IF029464: Authentication-Warning: www.domain.com: OLDadmin set sender to root using -f Aug 5 09:40:02 www sendmail[29465]: s75Ee2vT029465: from=root, size=1426, class=0, nrcpts=1, msgid=<[email protected]>, relay=OLDadmin@localhost Aug 5 09:40:02 www sendmail[29464]: s75Ee2IF029464: from=root, size=1426, class=0, nrcpts=1, msgid=<[email protected]>, relay=OLDadmin@localhost Aug 5 09:40:02 www sendmail[29466]: s75Ee23t029466: from=<[email protected]>, size=1784, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:40:02 www sendmail[29466]: s75Ee23t029466: to=<[email protected]>, delay=00:00:00, mailer=local, pri=31784, dsn=4.4.3, stat=queued Aug 5 09:40:02 www sendmail[29467]: s75Ee2wh029467: from=<[email protected]>, size=1784, class=0, nrcpts=1, msgid=<[email protected]>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain [127.0.0.1] Aug 5 09:40:02 www sendmail[29467]: s75Ee2wh029467: to=<[email protected]>, delay=00:00:00, mailer=local, pri=31784, dsn=4.4.3, stat=queued Aug 5 09:40:02 www sendmail[29464]: s75Ee2IF029464: to=OLDadmin, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31426, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75Ee23t029466 Message accepted for delivery) Aug 5 09:40:02 www sendmail[29465]: s75Ee2vT029465: to=OLDadmin, ctladdr=root (0/0), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=31426, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (s75Ee2wh029467 Message accepted for delivery) Aug 5 09:40:06 www sm-msp-queue[29370]: restarting /usr/sbin/sendmail due to signal Aug 5 09:40:06 www sendmail[29372]: restarting /usr/sbin/sendmail due to signal Aug 5 09:40:06 www sm-msp-queue[29888]: starting daemon (8.14.4): queueing@01:00:00 Aug 5 09:40:06 www sendmail[29890]: starting daemon (8.14.4): SMTP+queueing@01:00:00 Aug 5 09:40:06 www sendmail[29891]: s75Ee23t029466: to=<[email protected]>, delay=00:00:04, mailer=local, pri=121784, dsn=5.1.1, stat=User unknown Aug 5 09:40:06 www sendmail[29891]: s75Ee23t029466: s75Ee6xY029891: DSN: User unknown Aug 5 09:40:06 www sendmail[29891]: s75Ee6xY029891: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=33035, dsn=2.0.0, stat=Sent Aug 5 09:40:06 www sendmail[29891]: s75Ee2wh029467: to=<[email protected]>, delay=00:00:04, mailer=local, pri=121784, dsn=5.1.1, stat=User unknown Aug 5 09:40:06 www sendmail[29891]: s75Ee2wh029467: s75Ee6xZ029891: DSN: User unknown Aug 5 09:40:06 www sendmail[29891]: s75Ee6xZ029891: to=<[email protected]>, delay=00:00:00, xdelay=00:00:00, mailer=local, pri=33035, dsn=2.0.0, stat=Sent Something to note about the maillog's: Before the crash, the msgid included localhost.localdomain; after the crash it's been domain.com. Thanks to all who take the time to read and look into this issue. I appreciate it and look forward to tackling this issue together.

  Read the article

• Using Amazon S3 for multiple remote data site uploads, securely

  - by Aitch

  I've been playing about with Amazon S3 a little for the first time and like what I see for various reasons relating to my potential use case. We have multiple (online) remote server boxes harvesting sensor data that is regularly uploaded every hour or so (rsync'ed) to a VPS server. The number of remote server boxes is growing regularly and forecast to keep growing (hundreds). The servers are geographically dispersed. The servers are also automatically built, therefore generic with standard tools and not bespoke per location. The data is many hundreds of files per day. I want to avoid a situation where I need to provision more VPS storage, or additional servers every time we hit the VPS capacity limit, after every N server deployments, whatever N might be. The remote servers can never be considered fully secure due to us not knowing what might happen to them when we are not looking. Our current solution is a bit naive and simply restricts inbound rsync only over ssh to known mac address directories and a known public key. There are plenty of holes to pick in this, I know. Let's say I write or use a script like s3cmd/s3sync to potentially push up the files. Would I need to manage hundreds of access keys and have each server customized to include this (do-able, but key management becomes nightmarish?) Could I restrict inbound connections somehow (eg by mac address), or just allow write-only to any client that was running the script? ( i could deal with a flood of data if someone got into a system? ) having a bucket per remote machine does not seem feasible due to bucket limits? I don't think I want to use a single common key as if one machine is breached then potentially, a malicious hack could get access to the filestore key and start deleting for ll clients, correct? I hope my inexperience has not blinded me to some other solution that might be suggested! I've read lots of examples of people using S3 for backup, but can't really find anything about this sort of data collection, unless my google terminology is wrong... I've written more than I should here, perhaps it can be summarised thus: In a perfect world I just want to have one of our techs install a new remote server into a location and it automagically starts sending files home with little or no intervention, and minimises risk? Pipedream or feasible? TIA, Aitch

  Read the article

• PHP: gethostbyname() suddenly no longer resolves names to IPs when run in Apache

  - by hurikhan77

  One of our older legacy servers which gets no further updates or reconfigurations suddenly stopped resolving hostnames to IPs when PHP is executed within Apache. However, it still works fine when executed from the CLI. From the RSS caches last modification time, I deduce that it stopped working on around Mar, 28th. To reproduce the problem, I created a script using fsockopen() and it said "connection failed (errno 2)". I further reduced the problem to being related with a failed name resolution: <?php $addr = gethostbyname("twitter.com"); echo "ADDR($addr)"; ?> When I run this through Apache, the output is ADDR(twitter.com), which is wrong. When I run this from the CLI, the output is ADDR(aaa.bbb.ccc.ddd) with varying IP addresses, as expected. Nothing on the server setup has changed. CLI and Apache module share the same php.ini. PHP is version v4.4.9 with Zend Optimizer v2.5.10. Apache is v1.3.31. I know the versions are old. But since nothing has been changed, a solution like "try to upgrade versions first" is no solution as the server's feature set/versioning is frozen and will be replaced soon. Still we need a solution. If I run dig through the script, it works in both environments (mod_php and CLI) but this is more than an ugly hack as it would involve many edits and testing throughout the whole script base which is also undesired as the PHP application on the server is frozen, too, and only receives security updates. It will be replaced by a complete rewrite (on the new server). But as the rewrite will take some time and successive replace parts of the legacy application, we need a fix for the resolver problem. I already googled a bit and while the problem is known, many did not find a fix. The fix to raise memory limits did not work. Restarts did not work. The resolver in mod_php just did stop working for no apparent reason. :-(

  Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >