Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 74/370 | < Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >

  • Renaming VLAN Interfaces in Linux

    - by rhololkeolke
    I need to know how to rename VLAN interfaces. I'm currently running Ubuntu 11.04. I'm running a networking application that takes frames on one interface applies things like delays and errors and then forwards the frames out another interface. The default naming convention which names things <interface>.<vlan> e.g. eth0.2 will not work for my purposes because the program which parses the configuration script for the networking application doesn't like the decimal in the interface name. I ran vconfig set_name_type VLAN_PLUS_VID which solves the decimal in the interface name problem, however, I can then no longer assign the same vlan id to multiple interfaces because they have the same name. I know how to change physical interface names using udev rules, but because the vlan's will have the same MAC address and they aren't physical interfaces I can't use those rules to rename the interfaces. Is there a way to rename any interface in linux, including the virtual ones? Is there a way to specify your own naming convention for config set_name_type option without having to recompile the source of vconfig?

    Read the article

  • Bulk email notifications API for social networking site

    - by goombaloon
    I'm looking to build a social networking site that notifies followers of a particular user when new content has been posted by that user. Since the hope is that the site will eventually have thousands of users with thousands of followers, I'd prefer to use an outside product/service to send the emails rather than building the functionality into the application and dealing with scalability issues. I've looked at MailChimp and a few others out there. Since my use case isn't really email campaigns, these providers don't seem like the right solution. In fact, MailChimp support confirmed for me that my scenario doesn't fit for them. I'm sure others have run into this same requirement. What are others out there using? I'm using .NET so would like to target something that has a .NET wrapper if possible. Any advice would be most appreciated!

    Read the article

  • Django Social Registration - Twitter Callback going to example.com

    - by user578888
    I have been working through installing django social registration on my webfaction account. So far I have the facebook login working. When I attempt to log in to to twitter I get the correct login page but after choosing "Allow" I am forwarded to the following URL: http://example.com/social/twitter/callback/.... where "example.com" is the actual URL it is forwarding to. I have setup the twitter app and have entered a valid oauth callback URL. I have searched the code on my developer machine for references to "example.com" but have not found any. Any help nailing this down will be greatly appreciated.

    Read the article

  • Learning networking fundamentals

    - by bplus
    Not having a CS degree has left large holes in my programming related knowledge. In particular I'd really like to learn some of the computer networking stuff I would have got in a good CS degree. The problem I really have is "not knowing what I don't know". So far I know I don't know anything about the following (as far as computer networks are concearned) -sockets -ports -internet protocol (the whole IP stack I keep hearing about). Can anyone add more to the list? Can anyone suggest a project (writing a toy web server?) Thanks in advance

    Read the article

  • Social Media Aggregator, Global Update via Powershell

    - by deanjmiller
    Does anyone know of a way to interface with a Social Media Aggregator using Powershell. For Instance, I would like to update my global status on digsby using Powershell. Digsby would then fan the message out to Facebook, Myspace, Twitter, Etc.. I am open to using any Social Media Aggregator that can do this.. Digsby, Seesmic, Ping.fm TweetDeek, etc.. If any of these programs have a com interface or something like it I'm sure who ever implements this first will have a large gain in users.

    Read the article

  • Step Aside Google

    - by David Dorf
    Step aside Google. While search will always be a huge part of the web, I can see a day in the not-too-distance future where search takes a backseat to the social graph. Links between pages will give way to relationships between people, including context like location. What does this mean for retail? It means your e-commerce strategy will slowly transition to an f-commerce strategy. Remember when a large portion of the online population was held captive inside the walls of AOL? All the commercials listed an AOL keyword, not a web address because that's where the majority of people surfed. Now, people are spending a huge amount of time in Facebook (despite Betty White's proclamation that its a big waste of time). According to Facebook, users spend 500 billion minutes per month on the site. Selling products where consumers are spending their time makes sense. The power of Like and Share are the most effective approach to marketing. More and more stores are popping up on Facebook, and soon they will be the front-end to e-commerce systems. As sites adopt the Facebook Open Graph API, users will have a harder time distinguishing the open web from their Facebook experience, including shopping. Of course e-commerce sites won't go away, but a large portion of their traffic will emanate from Facebook and in some cases Facebook will act as the front-end for the web store. Ignore Facebook Open Graph at your peril. In a Mashable article, Mitchell Harper made several predictions about how e-commerce will change based on Facebook. His five points are not far-fetched at all, so we need to watch this space carefully.

    Read the article

  • The Other "C" in CRM

    - by Brian Dayton
    Folks who know me know that I rarely, if ever, talk politics. And I never talk politicians. Having grown up in a household with one parent leaning left and the other leaning to the right it was the best way to keep the peace. This isn't about politics. It's about "constituents" and the need to improve the services and service levels for people--at the city, county, state/province, etc. level all the way up to national governments. As a citizen and tax payer it's also important to me that these services be provided at a reasonable cost. If there's a better and more efficient way to do something then it's my hope that a public sector organization takes advantage of technology the same way private sector companies do. Social services organizations have a complex job. They provide the services that people need, from healthcare and children's assistance to helping people find jobs. But many of these organizations are still managing these processes manually or outdated, home-grown applications that could have been written up to 30 years ago. A lot has changed in technology. On the (this is as political as I'm going to get) political front, stakeholders like you and me are expecting greater transparency on where and how funds are spent. I'll admit that most of the time, when I think about CRM systems, I think about my experience as a customer of my bank, utilities company or cable operator. But now that I'm older, have children and a house--I find myself interacting more and more with agencies and services organizations. My experiences are sometimes good and sometimes not so good. Along those lines, last week's announcement of Siebel CRM 8.2 for Public Sector caught my eye. You may not work in the public sector, but you are a constituent of some--actually a lot--of public sector organizations. I don't know which CRM systems city and county utilize but I'm going to start paying closer attention.

    Read the article

  • Gestão do Conhecimento 2.0 - Data Adiada para 30 de Junho

    - by Claudia Costa
    Nas organizações o conceito de intranet está a evoluir de um simples repositório de documentos e links para uma plataforma colaborativa, onde os colaboradores podem consultar, navegar, publicar, analisar, comentar e valorizar os seus conhecimentos e de outros.   Durante esta sessão apresentaremos os produtos e proposta de valor da Oracle para a evolução da intranet e gestão do conhecimento 2.0 (também conhecido como Social KM). Clique aqui e registe-se.   Agenda (Oracle, Lagoas Park/ 9:30-14:30) 09:15 - Café de Boas Vindas & Registo 09:30 - Gestão do Conhecimento 2.0 10:30 - Demo de GdC 2.0 com Oracle 11:00 - Coffee Break 11:30 - Oracle WebCenter Framework 12:30 - Oracle WebCenter Spaces 13:30 - Conclusão   Pré-requisitos Cada participante deverá trazer o seu Laptop preparado com as seguintes características: ·         2GB RAM, com acesso a WiFi ·         Disco rígido com 25GB de espaço livre (caso queira gravar a máquina virtal a disponibilizar durante a sessão)    Clique aqui e registe-se.   * Pedimos desculpa por esta alteração.  Caso surja algum impedimento em poder participar nesta nova data, agradeço por favor que nos informe.    

    Read the article

  • How to get feedback from the community on large chunks of code?

    - by MainMa
    Code Review.SE is great when you need feedback on a precise, short piece of code. But where to get similar feedback about the code itself when: you have thousands of LOC, don't have colleagues in your workplace ready or willing to review the code¹, don't have thousands of dollars to spend for a professional review by a third party developer?² Places like CodePlex are a good idea to get your project known³, but from what I've seen, the feedback you get on known projects are consumer feedback, i.e. concerns the bugs and feature requests, not the quality of the source code itself. What are the social way to get the community involved in the code review of the codebase of a certain size for an open source project which doesn't have the scale of Firefox or similar products? ¹ Which is the case for most personal and open source projects, or projects done in companies where the practice of regular and complete code review is nonexistent. ² Which is, again, the case for most personal and open source projects. ³ Even if too many projects published on CodePlex never get known, either because nobody cares or because they are presented not very well.

    Read the article

  • Share text message on selected media

    - by Siddharth
    I want to share text data on player selected social media. Basically I want to implement functionality like following link represent for android. Send Text Content I want to give user a choice for sharing on Twitter, Facebook, Messaging, Gmail etc. Above link give proper guidance for my question. Here is code that work on android Intent sendIntent = new Intent(); sendIntent.setAction(Intent.ACTION_SEND); sendIntent.putExtra(Intent.EXTRA_TEXT, "This is my text to send."); sendIntent.setType("text/plain"); startActivity(sendIntent);Intent sendIntent = new Intent(); sendIntent.setAction(Intent.ACTION_SEND); sendIntent.putExtra(Intent.EXTRA_TEXT, "This is my text to send."); sendIntent.setType("text/plain"); startActivity(sendIntent); I don't know same functionality implementation in Unity. Basically at present I am targeting two platform for my game Android iOS I found answer for Android platform but I can't able to get answer of iOS platform. Share text message on selected media - Unity Forum Now I think my question is clear to all of you. So please help me to solve it.

    Read the article

  • How to ping virtualbox guest machine by hostname?

    - by Punit Soni
    Here is the summary. VirtualBox 4.2.18 Host OS: Windows 7 Guest OS: Ubuntu 12.04 Networking: Bridged Adaptor I can ping Host and other machines in host's network from ubuntu guest using hostnames. But, I can only ping the guest machine using IP address from host and network machines. I have avahi-daemon running on Guest OS. I want to be able to ping/ssh the guest machine from host and other machines on network using hostname of the guest machine. Please help.

    Read the article

  • TPROXY Not working with HAProxy, Ubuntu 14.04

    - by Nyxynyx
    I'm trying to use HAProxy as a fully transparent proxy using TPROXY in Ubuntu 14.04. HAProxy will be setup on the first server with eth1 111.111.250.250 and eth0 10.111.128.134. The single balanced server has eth1 and eth0 as well. eth1 is the public facing network interface while eth0 is for the private network which both servers are in. Problem: I'm able to connect to the balanced server's port 1234 directly (via eth1) but am not able to reach the balanced server via Haproxy port 1234 (which redirects to 1234 via eth0). Am I missing out something in this configuration? On the HAProxy server The current kernel is: Linux extremehash-lb2 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:11:08 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux The kernel appears to have TPROXY support: # grep TPROXY /boot/config-3.13.0-24-generic CONFIG_NETFILTER_XT_TARGET_TPROXY=m HAProxy was compiled with TPROXY support: haproxy -vv HA-Proxy version 1.5.3 2014/07/25 Copyright 2000-2014 Willy Tarreau <[email protected]> Build options : TARGET = linux26 CPU = x86_64 CC = gcc CFLAGS = -g -fno-strict-aliasing OPTIONS = USE_LINUX_TPROXY=1 USE_LIBCRYPT=1 USE_STATIC_PCRE=1 Default settings : maxconn = 2000, bufsize = 16384, maxrewrite = 8192, maxpollevents = 200 Encrypted password support via crypt(3): yes Built without zlib support (USE_ZLIB not set) Compression algorithms supported : identity Built without OpenSSL support (USE_OPENSSL not set) Built with PCRE version : 8.31 2012-07-06 PCRE library supports JIT : no (USE_PCRE_JIT not set) Built with transparent proxy support using: IP_TRANSPARENT IPV6_TRANSPARENT IP_FREEBIND Available polling systems : epoll : pref=300, test result OK poll : pref=200, test result OK select : pref=150, test result OK Total: 3 (3 usable), will use epoll. In /etc/haproxy/haproxy.cfg, I've configured a port to have the following options: listen test1235 :1234 mode tcp option tcplog balance leastconn source 0.0.0.0 usesrc clientip server balanced1 10.111.163.76:1234 check inter 5s rise 2 fall 4 weight 4 On the balanced server In /etc/networking/interfaces I've set the gateway for eth0 to be the HAProxy box 10.111.128.134 and restarted networking. auto eth0 eth1 iface eth0 inet static address 111.111.250.250 netmask 255.255.224.0 gateway 111.131.224.1 dns-nameservers 8.8.4.4 8.8.8.8 209.244.0.3 iface eth1 inet static address 10.111.163.76 netmask 255.255.0.0 gateway 10.111.128.134 ip route gives: default via 111.111.224.1 dev eth0 10.111.0.0/16 dev eth1 proto kernel scope link src 10.111.163.76 111.111.224.0/19 dev eth0 proto kernel scope link src 111.111.250.250

    Read the article

  • I have too many DNS servers configured

    - by Jon Will
    I have my laptop connecting to my wireless router, and I have told the router to issue out DNS via the DHCP lease. The laptop is configured to use the information. The router is configured to only issue two DNS server addresses from open dns, but the laptop reports Networking Dns Servers: 10.197.100.1 10.197.100.2 10.197.100.3 8.8.8.8 8.8.4.4 208.67.222.222 208.67.220.220 I have no idea where the laptop is getting these additional IPs as DNS. Please advise.

    Read the article

  • Network devices disabled

    - by Tao
    I've been running the Lucid Lynx alpha since first release and only now, after recently putting my computer into suspend then restarting, has the networking failed completely. Both wireless and ethernet list as disabled with sudo lshw -C network. The wireless adapter is an Atheros AR928X. The ethernet is a Realtek RTL8111/8168B. Any suggestions as to how I might go about fixing this?

    Read the article

  • Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine [migrated]

    - by javadba
    I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

    Read the article

  • Virtual Machine with Bridged Adapter to Centos not accepting ssh from host machine

    - by javadba
    I have a bridged connection on VirtualBox from os/x 10.8.5 host to Centos 5.8 client. But I suspect this is more of a general issue than specific to the host and precise version of linux. Shown below are the networking info from the VirtualBox and from within the guest sshd is running on port 22: [root@oracle-linux ~]# ps -ef | grep sshd | grep -v grep root 3103 1 0 20:22 ? 00:00:00 /usr/sbin/sshd root 14994 3103 0 21:23 ? 00:00:00 sshd: root@pts/1 Port 22 listening: [root@oracle-linux ~]# netstat -an | grep 22 | grep tcp | grep LIST tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN tcp 0 0 :::22 :::* LISTEN Here are ip addresses, still on the guest os: [root@oracle-linux ~]# ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b9:e5:79 brd ff:ff:ff:ff:ff:ff inet 10.0.15.100/24 brd 10.0.15.255 scope global eth0 inet6 fe80::a00:27ff:feb9:e579/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 08:00:27:b4:86:8a brd ff:ff:ff:ff:ff:ff inet 10.0.3.15/24 brd 10.0.3.255 scope global eth1 inet6 fe80::a00:27ff:feb4:868a/64 scope link valid_lft forever preferred_lft forever [root@oracle-linux ~]# I can ssh to the guest from the guest: root@oracle-linux ~]# ssh 10.0.3.15 The authenticity of host '10.0.3.15 (10.0.3.15)' can't be established. RSA key fingerprint is ef:08:19:72:95:4d:e5:28:af:f3:6f:54:07:84:ba:04. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added '10.0.3.15' (RSA) to the list of known hosts. [email protected]'s password: Last login: Mon Oct 21 21:24:12 2013 from 10.0.15.100 But can NOT ssh from the host to the guest: 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection Here is bridged connection infO; BTW I looked into other answers, and one of them mentioned doing service iptables stop That did not help. Adapter 2 is a NAT, shown below In case NAT is causing any issues, i shut it down and restarted networking. [root@oracle-linux ~]# /etc/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: Still No joy.. 18:27:04/shared:11 $ssh [email protected] ssh: connect to host 10.0.15.100 port 22: Operation timed out lost connection

    Read the article

  • How to ping virtualbox guest machine by hostname? [migrated]

    - by Punit Soni
    Here is the summary. VirtualBox 4.2.18 Host OS: Windows 7 Guest OS: Ubuntu 12.04 Networking: Bridged Adaptor I can ping Host and other machines in host's network from ubuntu guest using hostnames. But, I can only ping the guest machine using IP address from host and network machines. I have avahi-daemon running on Guest OS. I want to be able to ping/ssh the guest machine from host and other machines on network using hostname of the guest machine. Please help.

    Read the article

  • No Internet connectivity to linux container on Debian

    - by kirankumar
    I have created a linux container with debian-wheezy template. I am not able to have internet connectivity from the container. Below is my network configuration. Could some one please help me in figuring out the issue ? I can ping to the eth0 ip address in the container from the host. Similarly, i can ping from container to br0 ip address on the host. /etc/network/interfaces on host =============================== # The loopback network interface auto lo iface lo inet loopback # The primary network interface #allow-hotplug eth0 auto eth0 iface eth0 inet dhcp # bridge configuration auto br0 iface br0 inet dhcp bridge_ports eth0 vethCE2 bridge_fd 0 bridge_stp off bridge_maxwait 0 ifconfig -a output on host ========================== ifconfig -a br0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e inet addr:10.0.0.11 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:febd:615e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:422 errors:0 dropped:0 overruns:0 frame:0 TX packets:266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:174110 (170.0 KiB) TX bytes:31582 (30.8 KiB) eth0 Link encap:Ethernet HWaddr 08:00:27:bd:61:5e UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13017 errors:0 dropped:0 overruns:0 frame:0 TX packets:6210 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7944745 (7.5 MiB) TX bytes:1368421 (1.3 MiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:835 errors:0 dropped:0 overruns:0 frame:0 TX packets:835 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:91148 (89.0 KiB) TX bytes:91148 (89.0 KiB) vethCE2 Link encap:Ethernet HWaddr fe:3a:43:52:14:49 inet6 addr: fe80::fc3a:43ff:fe52:1449/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:52 errors:0 dropped:0 overruns:0 frame:0 TX packets:205 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2660 (2.5 KiB) TX bytes:31133 (30.4 KiB) brctl show output on host ========================== bridge name bridge id STP enabled interfaces br0 8000.080027bd615e no eth0 vethCE2 /etc/network/interfaces on container ======================================= auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 10.0.0.99 netmask 255.255.255.0 network 10.0.0.0 ifconfig -a output on container =============================== root@CE2:~# ifconfig -a eth0 Link encap:Ethernet HWaddr 00:11:22:33:44:00 inet addr:10.0.0.99 Bcast:10.0.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:22ff:fe33:4400/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:198 errors:0 dropped:0 overruns:0 frame:0 TX packets:52 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:30121 (29.4 KiB) TX bytes:2660 (2.5 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:26 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2366 (2.3 KiB) TX bytes:2366 (2.3 KiB) Networking content of /var/lib/lxc/CE2/config ============================================== # networking lxc.network.type = veth lxc.network.flags = up lxc.network.link = br0 lxc.network.name = eth0 lxc.network.veth.pair = vethCE2 # It is fine to be commented out #lxc.network.ipv4 = 192.168.10.21/24 # Change this lxc.network.hwaddr = 00:11:22:33:44:00 Let me know if you need any other details. Thanks, Kiran Kumar

    Read the article

  • How to tell credentials used for a Network Mapping?

    - by shanecourtrille
    I have a networking mapping that doesn't appear to work. When I connect to the mapping I get access denied when I try to create a folder. When I created the mapping I told it to login as another account. I have verified that account has the proper rights on the server side of things. How can I verify that my local machine is connecting with the right credentials?

    Read the article

  • How do I enable TUN/TAP forwarding?

    - by rafal
    I have a program which writes packets (destination address 10.3.0.2) to the TUN/TAP interface. Network: host1|tun0----eth1(10.3.0.1)|-------------------host2|eth1(10.3.0.2)| Wireshark captures these packets from interface tun0 but they are not forwarded to interface eth1. Commands: sysctl -w net.ipv4.ip_forward=1 sysctl -p iptables -A INPUT -i tun+ -j ACCEPT iptables -A FORWARD -i tun+ -j ACCEPT iptables -A INPUT -i tap+ -j ACCEPT iptables -A FORWARD -i tap+ -j ACCEPT /etc/init.d/networking restart /etc/init.d/openvpn restart

    Read the article

  • Layman's book for understanding computer networks

    - by srid
    The good thing about books targeting a layman is that it is usually very engaging to read (not dry and boring like, say, school/university books). Charles Petzold's Code: The Hidden Language of Computer Hardware and Software does this for explaining the underlying hardware in computers. Is there a similar book for understanding computer networking?

    Read the article

  • Best way to provide redundant switching/links to server

    - by Myles Gray
    We have 3x ESX hosts and 2x SANS that we wish to move to a redundant 10G networking infrastructure. We have 4x Dell PowerConnect 8024F's to provide our backbone and are configured as so (only core switches relevant to this question): So the questions are: 1) Do the interconnects between the 4x 8024F's need to be LAG'd or just STP'd 2) As the NICs on the servers are split across 2 switches, does any special configuration need to be done here or on the switches? 3) If a link or switch fails will the switches automatically find a new path to the Server/SAN?

    Read the article

  • Which service should I make mine dependant on ?

    - by Retrocoder
    I want to add a dependency to my service so that it only tries to start after most of the Windows services have started. Can anyone recommend such a service that is unlikely to have been disabled for security reasons on corporate sites. As my service needs the networking services up and running I want to make sure mine starts after these. This service may also be deployed in non-corporate environments so I’m looking for a suitable service that is unlikely to have been disabled by the end user.

    Read the article

  • How do you hide a computer name on a network? (OS X 10.6)

    - by George
    I regularly plug my Macbook Pro into a network at work, but because of the way Mac networking works, my computer's name instantly becomes available to any other Mac on the network. Is there a way to hide my computer's name so that I do not appear on the network list of other people's computers? Also, can I set this up so as a network specific profile? For instance, I would like my computer's name to show up on my home network, but not my work network.

    Read the article

  • How Windows Server routes PTP v2 unicast messages?

    - by Bobb
    If my server is placed in PTP v2 enabled network which has grand master clock. And the switch is PTP aware. The server is W2008R2 (soon to be W2012). I also have PTP v2 software client. How does the master clock messages are getting on with Windows Server? Does it need special PTP-aware NIC or it will be treated as normal networking traffic and the software receives it through regular NIC no problem?

    Read the article

< Previous Page | 70 71 72 73 74 75 76 77 78 79 80 81  | Next Page >