Search Results

Search found 27649 results on 1106 pages for 'ask how to geek'.

Page 75/1106 | < Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >

• Can't install Linux drivers for ASUS N-13 wireless adapter

  - by jcc

  I have a USB N13 wireless Adapter with install CD-- For Windows. I downloaded drivers from ASUS FOR N13 for Linux. Disregard install CD that came with adapter; it's for Windows. I then downloaded Windows Wireless driver install program app from Software Center in Ubuntu 12.10. The problem is me. I am newbie with all things linux; software sources, G Debi, default archive manager, synaptic package manager and the Terminal. The downloaded driver file is a .zip file. I managed to extract it to a tar.gz file and then to open it to the contained files. When I use the Windows Wireless driver program it ends up telling me there is no .inf file and goes no further. It wants to install .inf file but I don't even see one in all the files. Can someone please help me . I think you can tell by my wording I don't have a clue. I hope this is'nt too chatty. I've tried to be explicit and to the point. Thank you. Oh, this is on an ASUS LAPTOP K53E. I've looked all over Ask Ubuntu and finally found some questions even on the N13 but they didn't help; still some differences in the exact problem.

  Read the article

• USB flash module giving errors

  - by vshenoy

  Hi, I have a SATA USB flash module which was earlier running a 2.4 linux kernel (2.4.36.6) and on which now I am trying to install ubuntu server 10.04.1 LTS. I have two such USB flash modules and on one of them the installation process itself giving these errors: sd 4:0:0:0 [sda] Device not ready sd 4:0:0:0 [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 4:0:0:0 [sda] Sense Key : Not Ready [current] sd 4:0:0:0 [sda] Add. Sense: Medium not present sd 4:0:0:0 [sda] CDB: Write(10): 2a 00 00 05 48 02 00 00 04 00 end_request: I/O error, dev sda, sector 46114 usb 1-1: reset high speed USB device using ehci_hcd and address 2 Buffer I/O error on device sda1, logical block 172033 lost page write due to I/O error on sda1 Buffer I/O error on device sda1, logical block 172034 lost page write due to I/O error on sda1 on the other the installation is successful, but after a day or two of running the machine hangs because of kernel spewing these messages: Remounting filesystem read-only EXT2-fs error (device sda1): read_block_bitmap: Cannot read block [bitmap - block_group = 105, block_bitmap = 860161] EXT2-fs error (device sda1): ext2_get_inode: unable to read inode block - inode=13083, block=24683 ext2_free_inode: bit already cleared for inode 83966 and the machine needs to be hard rebooted. On both the systems SCSI emulation with usb_storage driver is being used to detect the module. Here is the output of /proc/scsi/scsi on 2.4: # cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 02 and on 2.6: # cat /proc/scsi/scsi Attached devices: Host: scsi6 Channel: 00 Id: 00 Lun: 00 Vendor: TS Model: UFM Rev: 1100 Type: Direct-Access ANSI SCSI revision: 00 i.e. only 'ANSI SCSI revision:' is shown as different, although I am not sure if this can cause any problem. Really appreciate if someone can point as to how to debug this issue or any mailing list where I can further ask questions about this.

  Read the article

• Can org.freedesktop.Notifications.CloseNotification(uint id) be triggered and invoked via DBus?

  - by george rowell

  ref: Close button on notify-osd? Bookmark: Can org.freedesktop.Notifications.CloseNotification(uint id) be triggered and invoked via DBus? Currently, this script dbus-monitor "interface='org.freedesktop.Notifications'" | \ grep --line-buffered "member=Notify" | \ sed -u -e 's/.*/killall notify-osd/g' | \ bash will kill all pending notifications. It would be better to finesse the specific target OSD notification to cancel, by using org.freedesktop.Notifications.CloseNotification(uint id). Is there an interface method that can put this on (in?) the DBus to fire when a particular notify event occurs? The method will need to get the notify PID to use as the argument for CloseNotification(uint id). Alternatively, qdbus org.freedesktop.Notifications \ /org/freedesktop/Notifications \ org.freedesktop.Notifications.CloseNotification(uint id) could be used from the shell, if the (uint id) argument could be determined. The actual command syntax would use an integer in place of (uint id). Perhaps a better question to ask first might be "How is the DBus address for a notification found?". In hindsight the previous question "How is the (uint id) for a notification found?" is rhetorical! This previous answer: http://askubuntu.com/a/186311/89468 provided details so either method below can be used: gdbus call --session --dest org.freedesktop.DBus \ --object-path / \ --method org.freedesktop.DBus.GetConnectionUnixProcessID :1.16 returning: (uint32 8957,) or qdbus --literal --session org.freedesktop.DBus / \ org.freedesktop.DBus.GetConnectionUnixProcessID :1.16 returning: 8957

  Read the article

• Ubuntu running like mud, system hangs and looks like its running at 3FPS

  - by user240803

  the system specks: AMD XP 3200+ 1GB DDR 333 RAM 160 GB HD IDE NVIDIA FX 5500 AGP Video Card Compaq Presario sr1230nx the system takes forever to boot and when it does it runs like total mud, reminds me of an overloaded system that has too many windows open or something... fresh install tried soo many thing like new memory (it had 512 stick) a new video card (onboard 8mb sis sounded like the problem, but wasn't... has gotten a little faster now but not by much) tried to disable all the things on the motherboard that could be, with no help... this machine runs windows XP, 7, and 8 JUST FINE!!! I mean for a single core CPU WIN8 runs AWESOME!!! BUT I already have a Gaming Desktop that has Windows 8 pro I want a Linux machine to get some time in and learn a few things... I want Ubuntu because of the Software center so I can install things I want until I am familiar with the command line.. I've worked on Computers since I was 12 I remember some of the DOS commands but I guess these are a little different... anyway any ideas? Ive also tried both drivers for the NVIDA card and that didn't help either... its not the card since it did this with both the NVIDA card and the SIS onboard... it also does this on live mode with the USB so I don't think its the HardDrive... I'm running out of options of hardware to try... I know this version of Linux works cuz Ive booted it on other machines and it ran great... what is with this Compaq? here is a vid of exactly what its doing... let me know if you need anything else I am right by the comptuer tonight so ask anything... http://youtu.be/-P-XNo81098

  Read the article

• Unsure about TRIM enabled on my SSD

  - by user84750

  I have a SSD OCZ Vertex4 installed on my laptop. I'm running Ubuntu 12.04 LTS. I have enable TRIM by adding "discard" to my fstab file. (also added option noatime). I rebooted my Ubuntu and followed These instructions here to test TRIM. The end results of my tempfile was all ffff's, when it should have read all zero's, which is telling me TRIM is not really working or enabled correctly. Did I miss something? Also, will it be a problem if only my /home directory is encrypted. AND if you ask why I have swap on my SSD, it's because I let Ubuntu set up my partition. When I have my SSD, I just wanted to install Ubuntu as fast as possible. =) I've done testing to see at which point it will start to use swap and it took a lot of applications open to finally use swap. I currently have 4 GB of memory. I might shrink this to like 512 MB or 1 GB the most. Here's some info about my file system setup. sudo hdparm -I /dev/sda1 | grep "TRIM supported" Data Set Management TRIM supported (limit 16 blocks) sudo fdisk -l /dev/sda Device Boot Start End Blocks Id System /dev/sda1 * 2048 242016255 121007104 83 Linux /dev/sda2 242018302 250068991 4025345 5 Extended /dev/sda5 242018304 250068991 4025344 82 Linux swap / Solaris ls /dev/mapper control cryptswap1

  Read the article

• How to connect ethernet on ubuntu (with auto-detection by Ubuntu)

  - by user12285

  Do I need to post another thread for the same? If so, sorry. Yes, I saw that it's been well over six months but I have the same router SmartAX MT880d with ethernet, and the exact same problem, that is no internet even though I can successfully reach the modem settings page by entering 192.168.1.1 in Firefox. Sorry if I don't use the right (technical) terminology to express my issue. English is not my mother tongue. I'm a total beginner with ubuntu. My internet works great in Windows but does not work in Ubuntu. For 2 weeks, I've kept reading on the web and forums and the ubuntuguide.org to name a few but to no avail. Now I see no other solution but to ask for help. My problem is that as a beginner, I can't find a way to put the right digits in the right place because I don't know what numbers I need to put in what files (eg: do I need to use DHCP? or a static IP address? No clue whatsoever. I'm confused between putting figures in the wrong spaces. For example, is the modem/router's IP exactly 192.168.1.1 for Huawei Smart AXMT880d modem?? Is the subnet 255.255.255.0? Gateway 192.168.1.1. I'm confused as I can also see a different IP starting with 155131*** (is it an account number? no clue again) on my contract with Huawei (a Chinese ISP). Apart from calling 911, what other numbers do I need to put in and where? How do I check that all the numbers have been entered correctly in every appropriate space before trying to connect the Internet?

  Read the article

• Any danger in using the Wine workaround in 12.04?

  - by TrailRider

  To run certain Windows programs in WINE you need to this workaround: echo 0|sudo tee /proc/sys/kernel/yama/ptrace_scope According to the support websites, this is due to a bug in the Ubuntu kernel that prevents ptrace and WINE playing well together. Using the above command you set the ptrace to 0 which according the research I've done(don't ask me which websites, I have seem a lot of them), ptrace has to do with the interactions between programs. The 0 setting is more permissive than the 1. I have to assume that there was a good reason Ubuntu wanted the ptrace=1 so this leads me back to the short form of the question. Are there any risks involved in setting ptrace=0. Lower security? problems debugging? any others that I haven't thought of??? P.S. for anybody reading this that wonders what the bug causes, the Windows programs will fail to open at all, in the System Monitor you will see many instances of the program trying to open and then they will eventually all quit and if you run the progam for the terminal you will get an error that tells you that the maximum number of program instances has been reached.

  Read the article

• Triple-display setup using AMD drivers

  - by Halik

  I am currently running a dual display setup with nVidia 8800GTS video card, on a Ubuntu 12.10 box. The current setup uses nVidia TwinView to render the image on a 1920x1200 display and 1600x1200 one. I'm planning to add a third, 1280x1024 display to the setup. The change will require me to upgrade my GFX card to one supporting triple displays. I'll probably go with Sapphire Radeon 7770 (FLEX edition, to avoid additional active DP-DVI adapters). Before I invest in new GFX I wanted to ask - how well the AMD drivers will support such a setup. It does not matter whether it's fglrx or the OSS ones. If I remember correctly, when running Fedora on a Radeon x800, I had 'void' areas above and below the working area on my second display. The desktop was rendered in 1920+1280 width and 1200 height (which left 176px of vertical space accessible for my cursor and windows but not displayed on the screen - I'd prefer to avoid that). It may have very well been my misconfiguration back then. Generally, are there any solutions from AMD on par with TwinView? Or is it a non-issue at all? Also, I'm wondering about the usual stuff - hardware h264 decoding support, glitch-free flash support, any issues with Compiz/Unity?

  Read the article

• Photoshop alternative with same keyboard shorcuts

  - by user292254

  tldr; Is there a program with the same keyboard shortcuts and/or user interface as PS. I know the "photoshop alternative" question has been asked so many times, but I feel this variant is worth the time to ask. I am a web designer and have been using PS daily on a windows or mac machine for about 10 years, but I do most of my development in linux. The only thing that has been keeping me from the full switch to linux is PS. I have tried many alternatives, including GIMP, but I feel the barrier to entry is too high for one reason and one reason only, the keyboard shortcuts. Over the years I have become very adept and quick in the use of PS because of keyboard shortcuts and muscle memory. I realize that many shortcuts can be customized, but many actions are just too different from PS. So my question is what programs are out there that are the closest to PS in keyboard shortcuts and interface. I don't care if I have to do a bunch of customization to get it as close as possible, but I just can't take too much time to learn a completely new workflow. Of course I realize that any software will take time and effort, I just want to make that time/effort as minimal as possible. Thanks in advance for your responses. edit I should tell you the most important features and workflow I use on a daily basis are, Smart objects, linked documents, save for web and devises.

  Read the article

• I just recursively chmod'd everything under / to 750. Any tips?

  - by Ouairz

  I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

  Read the article

• slow virtualbox guest

  - by ecoologic

  I run a guest ubuntu 12.04 on a host ubuntu 12.04, with virtual box, and the guest is much, much slower than the host (ALT+TAB costs 4-5secs). I had a look around and I found contradicting opinions on virtualbox vs vmware (free), so I taught to keep the former. Both systems are updated, I installed the additions on the guest and I evenly split memory and video memory (64mb) between guest and host. I am running a toshiba m200 laptop with 4GB ram and shared video memory. The host bios does not include a configuration option for machine virtualization. I have 2 cpus and I can't give them both to the vm. Is there anything I overlooked that could solve my problem? Feel free to ask for more info, and thank you for any help. EDIT Idling with the monitor open the (single) guest cpu never gets below 55% and could raise to 80 - 90% just moving the mouse around, opening ff will cause the monitor to run 100% in the guest, while the host shows that both cpus are evenly working around 60%. My cpu is Intel® Core™2 Duo CPU T5450 @ 1.66GHz × 2. If this is not a configuration problem, does it mean my machine is too weak for virtualization?

  Read the article

• What should be the path for storing Maildir e-mails?

  - by Thufir

  Am I storing e-mails to the correct path? Working from the dovecot-postfix package I'm able to deliver e-mails to myself as so: thufir@dur:~$ thufir@dur:~$ telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) HELO me 250 dur.bounceme.net mail from:<[email protected]> 250 2.1.0 Ok rcpt to:<thufir@localhost> 250 2.1.5 Ok data 354 End data with <CR><LF>.<CR><LF> subject: to evolution mail we'll see if this goes through. . 250 2.0.0 Ok: queued as 43D6F2A07C1 quit 221 2.0.0 Bye Connection closed by foreign host. thufir@dur:~$ and then here's the message: thufir@dur:~$ ll Maildir/new/ total 20 drwx------ 2 thufir thufir 4096 Nov 16 18:56 ./ drwx------ 5 thufir thufir 4096 Nov 16 18:56 ../ -rw------- 1 thufir thufir 410 Nov 16 11:57 1353095866.M305477P3932.dur,S=410,W=422 -rw------- 1 thufir thufir 424 Nov 16 17:20 1353115248.M841336P2990.dur,S=424,W=436 -rw------- 1 thufir thufir 445 Nov 16 18:56 1353121003.M187706P3838.dur,S=445,W=457 thufir@dur:~$ thufir@dur:~$ nl Maildir/new/1353121003.M187706P3838.dur\,S\=445\,W\=457 1 Return-Path: <[email protected]> 2 X-Original-To: thufir@localhost 3 Delivered-To: thufir@localhost 4 Received: from me (localhost [127.0.0.1]) 5 by dur.bounceme.net (Postfix) with SMTP id 43D6F2A07C1 6 for <thufir@localhost>; Fri, 16 Nov 2012 18:55:55 -0800 (PST) 7 subject: to evolution mail 8 Message-Id: <[email protected]> 9 Date: Fri, 16 Nov 2012 18:55:55 -0800 (PST) 10 From: [email protected] 11 we'll see if this goes through. thufir@dur:~$ Do I perhaps have postfix misconfigured? I ask because evolution seems to use a different path for mail.

  Read the article

• Bluetooth mouse no longer paired after resuming from suspend since upgrading to 13.10

  - by Korakys

  Since upgrading to 13.10 from 13.04 my mouse no longer connects via bluetooth. In settings it states that the mouse is not paired. Restarting bluetooth with sudo /etc/init.d/bluetooth restart does not help. Restarting the computer does fix the problem if bluetooth is restarted also with the previously mentioned command, but this is not ideal. The mouse worked fine prior to updating to 13.10. The computer is a ThinkPad X230 with a Broadcom 'BCM20702A0' bluetooth module (I think). When it is not working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:766129 acl:49888 sco:0 events:2233 errors:0 TX bytes:5953 acl:240 sco:0 commands:274 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'BCM20702A' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) When it is working hciconfig hci0 -a returns: hci0: Type: BR/EDR Bus: USB BD Address: C0:18:85:DB:F3:D1 ACL MTU: 1021:8 SCO MTU: 64:1 UP RUNNING PSCAN RX bytes:253334 acl:16391 sco:0 events:842 errors:0 TX bytes:2519 acl:65 sco:0 commands:84 errors:0 Features: 0xbf 0xfe 0xcf 0xfe 0xdb 0xff 0x7b 0x87 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH SNIFF Link mode: SLAVE ACCEPT Name: 'ubuntu-0' Class: 0x6e0100 Service Classes: Networking, Rendering, Capturing, Audio, Telephony Device Class: Computer, Uncategorized HCI Version: 4.0 (0x6) Revision: 0x1000 LMP Version: 4.0 (0x6) Subversion: 0x220e Manufacturer: Broadcom Corporation (15) I am a relative novice with linux so don't ask me compile anything please, but I can use google.

  Read the article

• Ubuntu Unity (64-bit) Bugs on Nvidia dual screen [closed]

  - by Kristofer

  On my work computer I have upgraded 10.04 to 10.10 and now to 11.04. Upgrades have mostly worked well and the dual screen setup is almost working. There are however a couple of annoying bugs which I tried to report but the bug reporting tool told me to ask about the bugs here. Here's what I have found: Auto-hide stops working. It doesn't seem to matter which application is maximised/covering the dock, it just stays on top. I have tested changing the autohide settings with no result. Scenario: One maximised window on each screen. If I now try to drag the window that doesn't have focus by dragging the top of the window nothing happens. I can also not give the window focus by clicking the top bar, I have to click inside the window and then I can drag the window. If I unmaximise the window with focus it does work and I can both change focus and drag the window directly by clicking the top of the maximised window. Any bug fixes coming for these issues? Any work-arounds?

  Read the article

• SSD on USB 3.0 doesnt always mount

  - by juergen

  I would like to ask you for some support for this issue. The SSD I use is apparently slightly damaged. Atm it shows this popular Corsair Series 3 problem. symptom: the disk is working for some minutes and then just suddenly stops. Two months ago it worked like a charm. This was my boot device in these days. So now I still need to copy some data out of the device which leads me to my question. Usually the SSD is working again for some minutes, when i unplug and replug its power. It gets detected by the system again and I can continue my backup. The problem on Ubuntu is, that it is not recognized again after two or three replugs. I have to reboot to bring it back. To specify this situation: when i unplug and replug my USB mouse before i reboot it is not recognized as well. So something seems to be wrong with the system also. my question: how do i fix this rebooting issue? I will post all the logs you need to analyse. The problem doesnt depend on the interface. I tried USB3.0, 2.0 and Sata already. Thank you! cheers my system: Ubuntu 11.10, Gigabyte G41MT-S2P, Intel E6750 Corsair Force Series 2 - F120, Digitus USB 3.0 Adapter, USB 3.0 interface card

  Read the article

• Why won't my graphics work in Ubuntu 12.04 LTS?

  - by user170974

  I'm very new to Ubuntu and to Linux in general, and took the leap and formatted my PC to Ubuntu 12.04 LTS very recently :) I seem to be having some trouble getting my graphics card to run properly, I looked over what information I could find but I still cannot get it up and running and figured this was a good place to ask for help. The information I can find on my graphics is as follows: (Terminal command) lspci outputs: 01:05.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RS880M [Mobility Radeon HD 4225/4250] 02:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Madison [Mobility Radeon HD 5650/5750 / 6530M/6550M] I tried using a mixture of the following links: How do I fix my installation of ATI Catalyst Video Driver in 12.04 LTS? What is the correct way to install ATI Catalyst Video Drivers (fglrx)? Ubuntu Precise Installation Guide But it does not seem to work, since running fglrxinfo in terminal gives: display: :0.0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x301) OpenGL version string: 1.4 (2.1 Mesa 9.0.3) What am I doing wrong here? All help appreciated ;) Edit: I have tried the legacy driver from www2.ati.com/drivers/linux/amd-driver-installer-catalyst-13-4-linux-x86.x86_64.zip I also tried the guide at https://launchpad.net/~makson96/+archive/fglrx which caused the system to crash (blackscreen, no boot) Neither seemed to work. I did however reinstall ubuntu 12.04 LTS, and re-tried both with no success. Reintalling ubuntu did however fix the broken dependencies problems, etc.

  Read the article

• how do I fix ati driver issue

  - by Michael

  I have little knowledge about ubuntu, but I am learning. Recently, my ubuntu 12.04 required that I update. I noticed that it was updating xorg and other things, after the update I was asked to reboot. I did. now when I start that computer up, it cannot detect any display and refuses to boot from usb. I have no idea how to recover my computer. It simply starts in what is akin to the terminal program and ask for my username and password. After that, I can enter commands. The problem may be because I manually installed drivers by copy pasting from some instructional that I now have no idea where they are, but what it amounts to is that I "built" the drivers. They were working GREAT until this update. I did this because otherwise I was unable to have sound through my hdmi. After I hand built the drivers, they worked great. After this update Ka-blam! nothing... Also, I had okay-ed lots of update sources (though all of them [xorg and such] were the stable versions, not the unstable update sources) Please help and thank you in advance. (if this is posted incorrectly or misplace, please let me know what to do)

  Read the article

• what other bash variables are available during execution such as $USER that can assist on my script?

  - by semi-newbie

  This is related to question 19245, in that one of the responders answered the question in an awesome way, and very VERY clear to any newbie. Now here is a question that i can't seem to figure. i wrote a script for starting the vmware firefox plugin (don't worry. i gave that up and now run vBox VERY happily. i left vmware for my servers :) ) I needed to start the plugin as sudo, but i also needed to pass an argument (password) to it, that happen to be the same. So, if my password was Hello123, the command would be: sudo ./myscript.sh hi other Hello123 running from command line, the script would ask for my sudo password and then run. i wanted to capture THAT password and pass it as well. i also wanted to run graphically, so i tried gksudo, and there is an option -p that returns the password for variable assignment. well, that was a nightmare, because i would still get prompted for the original sudo: see below Find UserName vUser=$USER Find password (and hopefully enable sudo) vP=gksudo -p -D somedescriptiontext echo Execute command gksudo ./myscript.sh hi $vUser $vP and i still get prompted twice. so my question is tri-fold: is there a variable i can use for the password, just like there is one for user, $USER? is there a different way i should be assigning the value resulting of the command i have in $vP? i am wondering if executing the way i have it, does it in an uninitiated session and not the current one, since i am getting some addtl warning type errors on some variables blah blah i tried using Zenity to just capture the text, but then of course, i couldn't pass that value to sudo, so i could only use as a parameter, which puts me back in 2 prompts. Thanksssssssssss!

  Read the article

• Wifi won't connect to certain networks

  - by Dave M G

  As I write this, I'm in a coffee shop on my laptop, and I am trying to connect to the free wifi network they offer. Every time I select their network from the wifi applet drop down menu, it connects for a second and then disconnects. At the same time, I have my Android phone with me, and it connects to the coffee shop's network without problem. There are a couple of people around me also using the same network with no issues. I asked the staff to check and as far as they can tell there is no problem with their router or anything. I have tried rebooting, but it has not made a difference. I have double and triple checked that I am using the correct WEP password. As an added wrinkle, when I connect to another network, it seems to connect (although I can't use them because they are paid gateway services). So I'm able to ask this question now because I have tethered my laptop to my phone, but it's slow and a workaround, not a solution. All indications are that it's a problem with my computer against this one network. Why would that be and how can I fix it?

  Read the article

• How can I have sound output before logging in?

  - by ??O?????

  I have a machine (Ubuntu 11.10) that I would like to have it play audio (typically through an amplifier), but the machine should be headless (where its final placement will be). I will control what is played through ssh. However, there is no sound output until I login to the graphical console. At first I thought it was an issue with pulseaudio, so I promptly removed it to use the default ALSA, but I have the same issues. I ssh to the machine, I run alsamixer and get the typical cannot open mixer: No such file or directory error (while /proc/asound/cards display correctly what I have). If I login on the graphical console, alsamixer works fine in the ssh session, and I have sound output. I logout, and then alsamixer stops working. So something runs (Xsession perhaps?) when I login that enables sound output, and gets disabled when I logout. I remember in older versions of Ubuntu, there was a drum roll when the machine showed the login screen; that is not the case anymore. Perhaps if I somehow can enable that drum roll, I'll have fixed my problem too. In any case, the question I ask is what the title says.

  Read the article

• Headphones not working in ubuntu 12.04LTS

  - by mursalat

  So after a million warnings about not supported ubuntu OS, last night I finally upgraded to 12.04 - went somewhat smoothly (sadly) After my installation I got all excited with the exciting new look when I login, and all the new shebang, gently I installed chrome and went to youtube to check out some of my music and test flash in the process, now the sound worked awesomely, however when I plugged in my headphones, I could hear only a buzz-like sound when the base drops or there is a loud noise, maybe I didn't hear it from the headphones, but some other source. However sadly my headphones are not working, and I am a noob at fixing these stuff on Ubuntu. I've done loads of programming but when it comes to linux drivers and settings I seem to get frustrated. So I would really appreciate any help people! IN SUMMARY: My headphones are not working, my laptop's internal speakers are working awesome. To be as helpful as I can I have pasted the output from lspci -v to http://pastebin.com/VQNzDkZs I have also checked the volume levels from alsamixer and none are on mute. If you need any more information, please just ask, and I will be checking this post every 3 to 4 hours! Cheers!

  Read the article

• No audio in Google Chrome

  - by Z9iT

  I started with Ubuntu 12.04 Minimal. Then installed only 3 utils sudo apt-get install xorg xinit google-chrome-stable alsa-base alsa-utils alsa-oss I have added google-chrome to .xinitrc file. Used sudo alsamixer to unmute everything using M. Also I am able to hear sound when I run this independently in a terminal sudo aplay /usr/share/sounds/alsa/Front_Center.wav However Google Chrome is not giving any sound output be it on youtube or the same file (/usr/share/sounds/alsa/Front_Center.wav) opened by browsing in chrome. UPDATE : the moment i install some Desktop (display) Manager like gnome or lxde and launch chrome then, the audio is perfect success. However if i kill the xsession and the desktop manager (lxde) AND then start with loading only the chrome (without DM) then again i loose the sound. This makes me wonder that there is something which is not allowing the sound to be loaded into chrome directly, but once the session like lxde loads, then it works flawless. I am thinking that i should rather ask, how to authorize google-chrome to use sound software? Miscellaneous : I am surprised to know that I cannot start google-chrome by sudo command (it asks to be a normal user) && that i cannot start alsamixer as a normal user (i must use sudo alsamixer ) May someone please help what i need to do so that google chrome speaks????

  Read the article

• Failed 11.10 to 12.04 upgrade and drove me crazy!

  - by Ivan

  Please help me with this! I first tried to upgrade my Ubuntu server from 11.10 to 12.04 thru Upgrade Manager, but never succeeded! Then I tried upgrading thru terminal, which took me ~4 hours as I was warned. When I restarted my computer, my login GUI did not show up at all! (Panic I was!) But when I switched to tty6 and it seemed the upgrade has finished, at least partially and got message Ubuntu 12.04LTS and telling me 12.10 is available. There are bunch of unmet dependencies...."apt-get install -f" may resolve the problem. Then I tried: sudo apt-get -f install, did not succeed! Also I tried sudo apt-get update && sudo apt-get upgrade I got bunch of error message too long to list here. Then I tried: sudo do-release-upgrade still bunch of error message there! There seems a lot trouble with the upgrade from 11.10 to 12.04 for me. Did I miss anything? Anyway, can I ask how I can get the gnome login GUI back? Thanks a lot! Yifang

  Read the article

• Laptop power button not working

  - by DyP

  I have a (seemingly rather exotic) Dell Latitude XT2 notebook running Lubuntu 12.04, fresh install. Tried to get the power button to work as expected (opening lubuntu-logout, just as I think it was meant to be out-of-the box), but no success: power button does nothing but forced power-off on long press. Here some more information, please ask if something more could help: Power button is recognized as a device: xinput lists Power Button as a slave keyboard at /dev/input/event1, and I can run a tool to listen to that device and invoke some action (successfully). But using .config/openbox/lubuntu-rc.xml to assign some action to XF86ShutDown or XF86PowerOff does nothing. Works well for any key of the keyboard. xinput --test reports a keycode (key press, key release) of 124 when pressing & releasing the power button. xmodmap -pk lists 124 mapped to XF86PowerOff which seems correct to me (btw: is this the same as XF86ShutDown?) When assigning another keysymname to the 124 keycode, e.g. 'w', still nothing happens when pressing the power button (no window seems to receive a 'w'). Works well for any key on the keyboard. The outputs of xev for a press/release of the power button irritate me: MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 41, synthetic NO, window 0x2a00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 41, synthetic NO, window 0x2a00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 41, synthetic NO, window 0x0, keys: 93 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (instead of 93, I also get different values) I might have missed something very basic since I'm not very familiar with both openbox/lubuntu and the X input system. Btw.: same goes for three other special buttons on my laptop..

  Read the article

• Configuring an Engenius 3500

  - by dsiddens

  The title speaks to only half of the issue: the other half are the settings in Ubuntu and the sequences therein. The computer in this issue does receive internet with the external antenna jack at the back being fed with a simple magnetic base antenna designed for putting on the roof of an automobile. However, that signal is weak and the Engenius with an external antenna (Rootenna ~15db gain) and ehternet wire will supply a stronger, faster signal. I've set the Engenius to the desired source and entered the correct WEP password. The lights on the Engenius indicate that it's connected to the access point. At the Ubuntu side of this I've worked to no avail changing settings with "Edit Connections" to the point I'm Ask(ing)Ubuntu for help. I have and have RTFM for Engenius 3500 There is an embarrassing side note to this issue: At one time I had the Engenius working! It seems that I can't recall the settings and sequences I used way back when. And I may as well confess to not knowing the Command Line. I'm a GUI guy. Thank you for your time, Doug

  Read the article

< Previous Page | 71 72 73 74 75 76 77 78 79 80 81 82  | Next Page >