Search Results

Search found 10634 results on 426 pages for 'pass it on'.

Page 80/426 | < Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >

  • Collisions and Lists

    - by user50635
    I've run into an issue that breaks my collisions. Here's my method: Gather Input Project Rectangle Check for intersection and ispassable Update The update method is built on object_position * seconds_passed * velocity * speed. Input changes velocity and is normalized if 1. This method works well with just one object comparison, however I pass a list or a for loop to the collision detector and velocity gets changed back to a non zero when the list hits an object that passes the test and the object can pass through. Any solutions would be much appreciated. Side note is there a more proper way to simulate movement?

    Read the article

  • aspect parameter validation [closed]

    - by user12558
    Hi, Im doing a POC using Aspectj. class BaseInfo{..} class UserInfo extends BaseInfo{..} class UserService { public void getUser(UserInfo userInfo){..} public void deleteUser(String userId){..} } I've defined an advice, that gets invoked when I pass an UserInfo instance.But when i try to pass the BaseInfo, the advice is not getting invoked. Below block executes the afterMethod as expected for getUser. &ltaop:pointcut id="aopafterMethod" expression="execution(* UserService.*(..,UserInfo,..))" / &gtaop:after pointcut-ref="aopafterMethod" method="afterMethod" / But when i try to give BaseInfo instead of UserInfo, the aspect is not getting triggered. Am i missing something? Kindly help me on this issue.

    Read the article

  • Simple Observation in Django: How Can I Correctly Modify The `attrs` sent to __new__ of a Django Mod

    - by DGGenuine
    Hello, I'm a strong proponent of the observer pattern, and this is what I'd like to be able to do in my Django models.py: class AModel(Model): __metaclass__ = SomethingMagical @post_save(AnotherModel) @classmethod def observe_another_model_saved(klass, sender, instance, created, **kwargs): pass @pre_init('YetAnotherModel') @classmethod def observe_yet_another_model_initializing(klass, sender, *args, **kwargs): pass @post_delete('DifferentApp.SomeModel') @classmethod def observe_some_model_deleted(klass, sender, **kwargs): pass This would connect a signal with sender = the decorator's argument and receiver = the decorated method. Right now my signal connection code all exists in __init__.py which is okay, but a little unmaintainable. I want this code all in one place, the models.py file. Thanks to helpful feedback from the community I'm very close (I think.) (I'm using a metaclass solution instead of the class decorator solution in the previous question/answer because you can't set attributes on classmethods, which I need.) I am having a strange error I don't understand. At the end of my post are the contents of a models.py that you can pop into a fresh project/application to see the error. Set your database to sqlite and add the application to installed apps. This is the error: Validating models... Unhandled exception in thread started by Traceback (most recent call last): File "/Library/Python/2.6/site-packages//lib/python2.6/site-packages/django/core/management/commands/runserver.py", line 48, in inner_run File "/Library/Python/2.6/site-packages/django/core/management/base.py", line 253, in validate raise CommandError("One or more models did not validate:\n%s" % error_text) django.core.management.base.CommandError: One or more models did not validate: local.myothermodel: 'my_model' has a relation with model MyModel, which has either not been installed or is abstract. I've indicated a few different things you can comment in/out to fix the error. First, if you don't modify the attrs sent to the metaclass's __new__, then the error does not arise. (Note even if you copy the dictionary element by element into a new dictionary, it still fails; only using the exact attrs dictionary works.) Second, if you reference the first model by class rather than by string, the error also doesn't arise regardless of what you do in __new__. I appreciate your help. I'll be githubbing the solution if and when it works. Maybe other people would enjoy a simplified way to use Django signals to observe application happenings. #models.py from django.db import models from django.db.models.base import ModelBase from django.db.models import signals import pdb class UnconnectedMethodWrapper(object): sender = None method = None signal = None def __init__(self, signal, sender, method): self.signal = signal self.sender = sender self.method = method def post_save(sender): return _make_decorator(signals.post_save, sender) def _make_decorator(signal, sender): def decorator(view): return UnconnectedMethodWrapper(signal, sender, view) return decorator class ConnectableModel(ModelBase): """ A meta class for any class that will have static or class methods that need to be connected to signals. """ def __new__(cls, name, bases, attrs): unconnecteds = {} ## NO WORK newattrs = {} for name, attr in attrs.iteritems(): if isinstance(attr, UnconnectedMethodWrapper): unconnecteds[name] = attr newattrs[name] = attr.method #replace the UnconnectedMethodWrapper with the method it wrapped. else: newattrs[name] = attr ## NO WORK # newattrs = {} # for name, attr in attrs.iteritems(): # newattrs[name] = attr ## WORKS # newattrs = attrs new = super(ConnectableModel, cls).__new__(cls, name, bases, newattrs) for name, unconnected in unconnecteds.iteritems(): _connect_signal(unconnected.signal, unconnected.sender, getattr(new, name), new._meta.app_label) return new def _connect_signal(signal, sender, receiver, default_app_label): # full implementation also accepts basestring as sender and will look up model accordingly signal.connect(sender=sender, receiver=receiver) class MyModel(models.Model): __metaclass__ = ConnectableModel @post_save('In my application this string matters') @classmethod def observe_it(klass, sender, instance, created, **kwargs): pass @classmethod def normal_class_method(klass): pass class MyOtherModel(models.Model): ## WORKS # my_model = models.ForeignKey(MyModel) ## NO WORK my_model = models.ForeignKey('MyModel')

    Read the article

  • tkinter frame does not show on startup

    - by Jzz
    this is my first question on SO, so correct me please if I make a fool of myself. I have this fairly complicated python / Tkinter application (python 2.7). On startup, the __init__ loads several frames, and loads a database. When that is finished, I want to set the application to a default state (there are 2 program states, 'calculate' and 'config'). Setting the state of the application means that the appropriate frame is displayed (using grid). When the program is running, the user can select a program state in the menu. Problem is, the frame is not displayed on startup. I get an empty application (menu bar and status bar are displayed). When I select a program state in the menu, the frame displays as it should. Question: What am I doing wrong? Should I update idletasks? I tried, but no result. Anything else? Background: I use the following to switch program states: def set_program_state(self, state): '''sets the program state''' #try cleaning all the frames: try: self.config_frame.grid_forget() except: pass try: self.tidal_calculations_frame.grid_forget() except: pass try: self.tidal_grapth_frame.grid_forget() except: pass if state == "calculate": print "Switching to calculation mode" self.tidal_calculations_frame.grid() #frame is preloaded self.tidal_calculations_frame.fill_data(routes=self.routing_data.routes, deviations=self.misc_data.deviations, ship_types=self.misc_data.ship_types) self.tidal_grapth_frame.grid() self.program_state = "calculate" elif state == "config": print "Switching to config mode" self.config_frame = GUI_helper.config_screen_frame(self, self.user) #load frame first (contents depend on type of user) self.config_frame.grid() self.program_state = "config" I understand that this is kind of messy to read, so I simplified things for testing, using this: def set_program_state(self, state): '''sets the program state''' #try cleaning all the frames: try: self.testlabel_1.grid_forget() except: pass try: self.testlabel_2.grid_forget() except: pass if state == "calculate": print "switching to test1" self.testlabel_1 = tk.Label(self, text="calculate", borderwidth=1, relief=tk.RAISED) self.testlabel_1.grid(row=0, sticky=tk.W+tk.E) elif state == "config": print "switching to test1" self.testlabel_2 = tk.Label(self, text="config", borderwidth=1, relief=tk.RAISED) self.testlabel_2.grid(row=0, sticky=tk.W+tk.E) But the result is the same. The frame (or label in this test) is not displayed at startup, but when the user selects the state (calling the same function) the frame is displayed. UPDATE the sample code in the comments (thanks for that!) pointed me in another direction. Further testing revealed (what I think) the cause of the problem. Disabling the display of the status bar made the program work as expected. Turns out, I used pack to display the statusbar and grid to display the frames. And they are in the same container, so problems arise. I fixed that by using only pack inside the main container. But the same problem is still there. This is what I use for the statusbar: self.status = GUI_helper.StatusBar(self.parent) self.status.pack(side=tk.BOTTOM, fill=tk.X) And if I comment out the last line (pack), the config frame loads on startup, as per this line: self.set_program_state("config") But if I let the status bar pack inside the main window, the config frame does not show. Where it does show when the user asks for it (with the same command as above).

    Read the article

  • Mounting NAS drive with cifs using credentials file through fstab does not work

    - by mahatmanich
    I can mount the drive in the following way, no problem there: mount -t cifs //nas/home /mnt/nas -o username=username,password=pass\!word,uid=1000,gid=100,rw,suid However if I try to mount it via fstab I get the following error: //nas/home /mnt/nas cifs iocharset=utf8,credentials=/home/username/.smbcredentials,uid=1000,gid=100 0 0 auto .smbcredentials file looks like this: username=username password=pass\!word Note the ! in my password ... which I am escaping in both instances I also made sure there are no eol in the file using :set noeol binary from Mount CIFS Credentials File has Special Character chmod on .credentials file is 0600 and chown is root:root file is under ~/ Why am I getting in on the one side and not with fstab?? I am running on ubuntu 12 LTE and mount.cifs -V gives me mount.cifs version: 5.1 Any help and suggestions would be appreciated ... UPDATE: /var/log/syslog shows following [26630.509396] Status code returned 0xc000006d NT_STATUS_LOGON_FAILURE [26630.509407] CIFS VFS: Send error in SessSetup = -13 [26630.509528] CIFS VFS: cifs_mount failed w/return code = -13 UPDATE no 2 Debugging with strace mount through fstab: strace -f -e trace=mount mount -a Process 4984 attached Process 4983 suspended Process 4985 attached Process 4984 suspended Process 4984 resumed Process 4985 detached [pid 4984] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4984] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = -1 EACCES (Permission denied) mount error(13): Permission denied Refer to the mount.cifs(8) manual page (e.g. man mount.cifs) Process 4983 resumed Process 4984 detached Mount through terminal strace -f -e trace=mount mount -t cifs //nas/home /mnt/nas -o username=user,password=pass\!wd,uid=1000,gid=100,rw,suid Process 4990 attached Process 4989 suspended Process 4991 attached Process 4990 suspended Process 4990 resumed Process 4991 detached [pid 4990] --- SIGCHLD (Child exited) @ 0 (0) --- [pid 4990] mount("//nas/home", ".", "cifs", 0, "ip=<internal ip>,unc=\\\\nas\\home"...) = 0 Process 4989 resumed Process 4990 detached

    Read the article

  • How to bypass resume from hibernate

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • Resource reference passing in puppet

    - by paweloque
    Is it possible to pass puppet resource references to other resources? My use-case is to build a jenkins build pipeline with puppet. To chain jenkins jobs into a pipeline I need to pass the successor job to a job. A subset of the definition is: jobs::build { "Build ${release_name}": release => $release_name, jenkins_jobs_path => $jenkins_jobs_path, successors => 'Deploy', } jobs::deploy { "Deploy ${release_name}": release => $release_name, jenkins_jobs_path => $jenkins_jobs_path, successors => 'Smoke Test', } In the def you see that I define the successors by name, i.e. 'Deploy' and in case of the second job 'Smoke Test'. What I'd like to do is to pass a reference to a resource and extract the name from it: jobs::build { "Build ${release_name}": release => $release_name, jenkins_jobs_path => $jenkins_jobs_path, successors => Jobs::Deploy["Deploy ${release_name}"], } jobs::deploy { "Deploy ${release_name}": release => $release_name, jenkins_jobs_path => $jenkins_jobs_path, successors => Jobs::Smoke_test["Smoke Test ${release_name}"], } And then within the jobs::deploy and jobs::build definition I'd access the resource by reference and query for it's type, etc.. Is it possible to achieve this in puppet?

    Read the article

  • Communicating via Command Mode with IBM HS22 IMM via AMM

    - by MikeyB
    On previous model blades that contained a BMC, I was able to communicate from our external management station via pass-through commands to the BMC to do things such as power blades on/off, set VPD parameters, reboot the BMC, etc. Now on the HS22, a bunch of things happen differently. For example, we can no longer use the same pass-through commands to write VPD information pages and have them persist across reboots of the IMM - it looks as though those VPD pages are populated from information contained in the IMM. How do we use the Advanced Settings Utility from an external host to communicate with HS22 IMMs? Alternatively, what TCP Command Mode commands do we need to send to the AMM to communicate with the IMM? For our purposes, we specifically cannot communicate with the IMM from the blade itself. Specific example: When I send a pass-thru IPMI command via the AMM to the blade BMC to write information (such as MTM, Serial) into VPD page 0x10, it persists on blades with a BMC (HS21 for example). I can send the same IPMI command to write data to the VPD page on the HS22, however it does not persist across reboots of the IMM. What IPMI commands do I need to send to the IMM? What IPMI commands are asu sending when it sets the MTM & Serial?

    Read the article

  • How to bypass resume from hibernate [closed]

    - by Daniel Trebbien
    I am attempting to resume a Windows Vista laptop from hibernate, but the resume process seems to be stuck in an endless loop in which Windows is repeatedly trying to read from the optical drive. When I press the Power On button on the laptop, the screen is black (not even the backlight turns on) and the following occurs in a loop: Five seconds pass and I hear the optical drive being accessed. (There's no disk in the drive, so it sounds like a short buzzing noise.) Two seconds pass and I hear the optical drive being accessed. Two seconds pass and I hear the optical drive being accessed. So it's three short buzzing noises in a row, over and over again. Eventually I have to abruptly power off the machine. I have tried inserting a data CD into the drive as well as a bootable CD (a live Linux distro boot disk). For both, the optical drive spins up for a bit, but stops after Windows decides that the disk is not what it is looking for. I have since lost the Windows Vista recovery DVD, but I don't know if inserting the recovery disk into the optical drive would have a different effect than the bootable CD. I have tried pressing F8 immediately after pressing the Power On button (hoping to enter System Restore), but that did not have an effect. Is there a special key sequence that will cause Windows to bypass resuming from hibernate, effectively ignoring hiberfil.sys?

    Read the article

  • apache2 + mod_fastcgi + suexec + php5.2 = unstable on high load...

    - by redguy..pl
    I am hosting several (~30) different sites on one server with apache2+fastcgi+suexec+php5. Sites have different loads and different execution times of their scripts (some of them process request for 5-7 seconds, some <1sek). Sometimes when single site receives very high load (all php instances of this site are created and used) - whole apache server hangs. Apache (worker mpm) creates new processes up to the upper limit. It looks like it is starting to queue ALL new request for EVERY site, not only the one that has high load and quickly achieves process limits... restart of apache solves the problem... config: FastCgiConfig -singleThreshold 1 -multiThreshold 10 -listen-queue-depth 30 -maxProcesses 80 -maxClassProcesses 12 -idle-timeout 30 -pass-header HTTP_AUTHORIZATION -pass-header If-Modified-Since -pass-header If-None-Match (earlier have default -listen-queue-depth = 100, but it didn't change anything...) Any suggestions? Another question - how is implemented this listen queue? is it one queue for whole apache, or unique queue for every defined php apllication (suexec site)? I would like to achieve something like this: when one site receives high load and its queue is full - server bounces next request, but only for this one site.. Other sites should work properly...

    Read the article

  • OpenVPN: ERROR: could not read Auth username from stdin

    - by user56231
    I managed to setup openvpn but now I want to integrate a user/pass authentication method so, even though I haven't added the auth-nocache in the server config, whenever I try to connect it returns with the following message on the client side: ERROR: could not read Auth username from stdin My server.conf file contains basic stuff, everything works up untill I try to implement this for of authentication. mode server dev tun proto tcp port 1194 keepalive 10 120 plugin /usr/lib/openvpn/openvpn-auth-pam.so login client-cert-not-required username-as-common-name auth-user-pass-verify /etc/openvpn/auth.pl via-env ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/easy-rsa/2.0/keys/server.crt key /etc/openvpn/easy-rsa/2.0/keys/server.key dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem user nobody group nogroup server 10.8.0.0 255.255.255.0 persist-key persist-tun #persist-local-ip status openvpn-status.log verb 3 client-to-client push "redirect-gateway def1" push "dhcp-option DNS 10.8.0.1" log-append /var/log/openvpn comp-lzo I searched all over the net for a solution and all answers seems to be related to the auth-nocache param which I haven't set. The directive auth-user-pass-verify /etc/openvpn/auth.pl via-env points to a script which is executed to perform the authentication. A false authentication should result in a exit 1 while a true one should result with exit 0. For testing, that script auth.pl returns exit 0 no matter what the input is but it seems that the file is not executed before the error raises. auth.pl file contents: #!/usr/bin/perl my $user = $ENV{username}; my $passwd = $ENV{password}; printf("$user : $passwd\n"); exit 0; Any ideas?

    Read the article

  • Rundeck get verbose output of command executing on node

    - by Leon Stafford
    I have Rundeck executing a remote script, which is in python is using print statements to return output normally such as: $ python mytest.py PASS: Condition 1 passed PASS: Condition 2 passed PASS: and so on... When I run this via Rundeck, however, it doesn't show me the same print generated outputs as above. In Rundeck's most detailed Debug output mode, I only receive the following: 06:31:12 Permanently added 'myremotenode.com' (RSA) to the list of known hosts. 06:31:12 SSH_MSG_NEWKEYS sent 06:31:12 SSH_MSG_NEWKEYS received 06:31:12 SSH_MSG_SERVICE_REQUEST sent 06:31:13 SSH_MSG_SERVICE_ACCEPT received 06:31:13 Authentications that can continue: publickey,password,keyboard-interactive 06:31:13 Next authentication method: publickey 06:31:13 Authentication succeeded (publickey). 06:31:13 /cygdrive/c/Program Files (x86)/Mozil... 06:32:06 Adding reference: ant.PropertyHelper 06:32:06 Setting project property: sshexec.output -> /cygdrive/c/Prog... I know that the remote script is actually executing just as usual, as I'm receiving other emails generated by the ~30min long script. Obviously, I don't want to have to wait 30mins to see the result of each print statement within the python script. How can I get the same level of output in Rundeck as I do in the bash shell directly?

    Read the article

  • OpenBSD logins via SSH seem to be ignoring my configured radius server

    - by Steve Kemp
    I've installed and configured a radius server upon my localhost - it is delegating auth to a remote LDAP server. Initially things look good: I can test via the console: # export user=skemp # export pass=xxx # radtest $user $pass localhost 1812 $secret Sending Access-Request of id 185 to 127.0.0.1 port 1812 User-Name = "skemp" User-Password = "xxx" NAS-IP-Address = 192.168.1.168 NAS-Port = 1812 rad_recv: Access-Accept packet from host 127.0.0.1 port 1812, id=185, Similarly I can use the login tool to do the same thing: bash-4.0# /usr/libexec/auth/login_radius -d -s login $user radius Password: $pass authorize However remote logins via SSH are failing, and so are invokations of "login" started by root. Looking at /var/log/radiusd.log I see no actual log of success/failure which I do see when using either of the previous tools. Instead sshd is just logging: sshd[23938]: Failed publickey for skemp from 192.168.1.9 sshd[23938]: Failed keyboard-interactive for skemp from 192.168.1.9 port 36259 ssh2 sshd[23938]: Failed password for skemp from 192.168.1.9 port 36259 ssh2 In /etc/login.conf I have this: # Default allowed authentication styles auth-defaults:auth=radius: ... radius:\ :auth=radius:\ :radius-server=localhost:\ :radius-port=1812:\ :radius-timeout=1:\ :radius-retries=5:

    Read the article

  • Passing two arguments to a command using pipes

    - by firebat
    Usually, we only need to pass one argument: echo abc | cat echo abc | cat some_file - echo abc | cat - some_file Is there a way to pass two arguments? Something like {echo abc , echo xyz} | cat cat `echo abc` `echo xyz` I could just store both results in a file first echo abc > file1 echo xyz > file2 cat file1 file2 But then I might accidentally overwrite a file, which is not ok. This is going into a non-interactive script. Basically, I need a way to pass the results of two arbitrary commands to cat without writing to a file. UPDATE: Sorry, the example masks the problem. While { echo abc ; echo xyz ; } | cat does seem to work, the output is due to the echos, not the cat. A better example would be { cut -f2 -d, file1; cut -f1 -d, file2; } | paste -d, which does not work as expected. With file1: a,b c,d file2: 1,2 3,4 Expected output is: b,1 d,3 RESOLVED: Use process substitution: cat <(command1) <(command2) Alternatively, make named pipes using mkfifo: mkfifo temp1 mkfifo temp2 command1 > temp1 & command2 > temp2 & cat temp1 temp2 Less elegant and more verbose, but works fine, as long as you make sure temp1 and temp2 don't exist before hand.

    Read the article

  • apache2 + mod_fastcgi + suexec + php5.2 = unstable on high load

    I am hosting several (~30) different sites on one server with apache2+fastcgi+suexec+php5. Sites have different loads and different execution times of their scripts (some of them process request for 5-7 seconds, some <1sek). Sometimes when single site receives very high load (all php instances of this site are created and used) - whole apache server hangs. Apache (worker mpm) creates new processes up to the upper limit. It looks like it is starting to queue ALL new request for EVERY site, not only the one that has high load and quickly achieves process limits... restart of apache solves the problem... config: FastCgiConfig -singleThreshold 1 -multiThreshold 10 -listen-queue-depth 30 -maxProcesses 80 -maxClassProcesses 12 -idle-timeout 30 -pass-header HTTP_AUTHORIZATION -pass-header If-Modified-Since -pass-header If-None-Match (earlier have default -listen-queue-depth = 100, but it didn't change anything...) Any suggestions? Another question - how is implemented this listen queue? is it one queue for whole apache, or unique queue for every defined php apllication (suexec site)? I would like to achieve something like this: when one site receives high load and its queue is full - server bounces next request, but only for this one site.. Other sites should work properly...

    Read the article

  • Hudson deploy specific git revision

    - by brad
    I'm using hudson to auto-deploy my Rails app to heroku. In my main build job I pull from a Git repo (hosted using gitosis on the same machine), master branch with the following: URL of repository: /home/git/repositories/my_app.git Name of repository: origin Refspec: +refs/heads/master:refs/remotes/origin/master Branches to build: master Then, assuming all tests pass, I want to kick off a new build that is the deploy to Heroku. I can't however figure out how to get that deploy build to checkout the particular revision that this build was using. I understand there's a parameterized trigger plugin that would allow me to pass this revision number, but I don't know how I can tell hudson to checkout this particular revision on the deploy build. I'm pretty sure this just has to do with my limited knowledge of git, but where in the hudson git config's is there an option to checkout a particular revision? Otherwise, I could have many commits happen whilst a build is happening, and when it kicks off a deploy build, that deploy build would just check out the HEAD of the branch, which may not be the same as the code that was pushed that triggered this build. I don't fully understand why I have a refspec in Hudson, then also specify a branch to build, I thought this was the same thing. Can refspec somehow specify the revision number? How would this be referenced if it was passed through with the parameterized trigger plugin? (I've never used that plugin, but someone else recommended it as a way to pass in vars to a new build, if there's another way I'm all ears)

    Read the article

  • Prevent outgoing traffic unless OpenVPN connection is active using pf.conf on Mac OS X

    - by Nick
    I've been able to deny all connections to external networks unless my OpenVPN connection is active using pf.conf. However, I lose Wi-Fi connectivity if the connection is broken by closing and opening the laptop lid or toggling Wi-Fi off and on again. I'm on Mac OS 10.8.1. I connect to the Web via Wi-Fi (from varying locations, including Internet cafés). The OpenVPN connection is set up with Viscosity. I have the following packet filter rules set up in /etc/pf.conf # Deny all packets unless they pass through the OpenVPN connection wifi=en1 vpn=tun0 block all set skip on lo pass on $wifi proto udp to [OpenVPN server IP address] port 443 pass on $vpn I start the packet filter service with sudo pfctl -e and load the new rules with sudo pfctl -f /etc/pf.conf. I have also edited /System/Library/LaunchDaemons/com.apple.pfctl.plist and changed the line <string>-f</string> to read <string>-ef</string> so that the packet filter launches at system startup. This all seems to works great at first: applications can only connect to the web if the OpenVPN connection is active, so I'm never leaking data over an insecure connection. But, if I close and reopen my laptop lid or turn Wi-Fi off and on again, the Wi-Fi connection is lost, and I see an exclamation mark in the Wi-Fi icon in the status bar. Clicking the Wi-Fi icon shows an "Alert: No Internet connection" message: To regain the connection, I have to disconnect and reconnect Wi-Fi, sometimes five or six times, before the "Alert: No Internet connection" message disappears and I'm able to open the VPN connection again. Other times, the Wi-Fi alert disappears of its own accord, the exclamation mark clears, and I'm able to connect again. Either way, it can take five minutes or more to get a connection again, which can be frustrating. Why does Wi-Fi report "No internet connection" after losing connectivity, and how can I diagnose this issue and fix it?

    Read the article

  • Nginx > Varnish > Gunicorn Error Too many Redirections

    - by kollo
    I have the following config: Nginx Varnish Gunicorn Django I want to cache 2 versions of same site (mobile & web) with Varnish. Gunicorn : WEB: gunicorn_django --bind 127.0.0.1:8181 MOBILE: gunicorn_django --bind 127.0.0.1:8182 Nginx: WEB: server { listen 80; server_name www.mysite.com; location / { proxy_pass http://127.0.0.1:8282; # pass to Varnish proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } MOBILE: server { listen 80; server_name m.mysite.com; location / { proxy_pass http://127.0.0.1:8282; # pass to Varnish proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } Varnish: default.vcl backend mobile_mysite { .host = "127.0.0.1"; .port = "8182"; } backend mysite { .host = "127.0.0.1"; .port = "8181"; } sub vcl_recv { if (req.http.host ~ "(?i)^(m.)?mysite.com$") { set req.http.host = "m.mysite.com"; set req.backend = mobile_mysite; }elsif (req.http.host ~ "(?i)^(www.)?mysite.com$") { set req.http.host = "mysite.com"; set req.backend = mysite; } if (req.url ~ ".*/static") { /* do not cache static content */ return (pass); } } The problem: On Nginx if I setup Mobile version with Varnish (port 8282) and let WEB version with Gunicorn( port 8181), MOBILE is cached by varnish, both WEB & MOBILE works but WEB is not cached. If I set the proxy_pass of WEB version to Varnish (port 8282) and restart Nginx I got an error when accessing web version (www.mysite.com) "Too many redirections" . I Think my problem come from the Varnish config file, as the site works well if I setup Nginx proxy_pass to Gunicorn ports (MOBILE & WEB).

    Read the article

  • Varnish returning 503, FetchError (could not get storage)

    - by Archan
    On the current setup we're running into a problem with Varnish, we're running a CentOS 5.7 x86_64 xenpv, with Cpanel WHM, hosted at VPS.net. Sometimes we will recieve a Guru Meditation from Varnish, and when we look in the varnishlog with the following command varnishlog -d -c -m TxStatus:503 it returns output similar to the following: 15 VCL_call c recv 15 VCL_acl c NO_MATCH devs 15 VCL_return c pass 15 VCL_call c hash 15 Hash c **** 15 Hash c ************* 15 VCL_return c hash 15 VCL_call c pass pass 15 Backend c 12 default default 15 TTL c 1835862523 RFC 0 -1 -1 1332454056 0 1332454055 375007920 0 15 VCL_call c fetch hit_for_pass 15 ObjProtocol c HTTP/1.1 15 ObjResponse c OK 15 ObjHeader c Date: Thu, 22 Mar 2012 22:07:35 GMT 15 ObjHeader c Server: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_bwlimited/1.4 mod_fcgid/2.3.6 15 ObjHeader c X-Powered-By: PHP/5.3.9 15 ObjHeader c Expires: Thu, 19 Nov 1981 08:52:00 GMT 15 ObjHeader c Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 15 ObjHeader c Pragma: no-cache 15 ObjHeader c Content-Type: text/html; charset=utf-8 15 ObjHeader c X-Cacheable: NO:Cache-Control=private 15 FetchError c chunked read_error: 12 (Could not get storage) 15 VCL_call c error deliver 15 VCL_call c deliver deliver As far as I have could gather, we could try increasing the nuke_limit, but currently we have a nuke_limit of 500, and when running varnishstat -1 -f n_lru_nuked we "only" get a total of 1031, even though we have seen the error happen on several pages. When we then run top to see how much memory Varnish is using, it only shows that it is using 763m, although we've set it to be allowed to use 1200m. Any ideas of what the problem can be?

    Read the article

  • Doing arithmetic and passing it to the next command

    - by neurolysis
    I know how to do this in /bin/sh, but I'm struggling a bit in Windows. I know you can do arithmetic on 32-bit signed integers with SET /a 2+2 4 But how do I pass this to the next command? For example, the process I want to perform is as follows. Consumer editions of Windows have no native automated sleep function (I believe?) -- the best way to perform a sleep is to use PING in association with the -n switch to get that many seconds, minus one, of sleep. The following command is effective for a silent sleep: PING localhost -n 3 > NUL But I want to alias this into a sleep command. I'd like to have it elegant so that you enter the actual number of seconds you want to sleep after the command, right now I can do DOSKEY SLEEP=PING 127.0.0.1 -n $1 > NUL Which works, but it's always 1 second less than your input, so if you wanted to sleep for one second you would have to use the command SLEEP 2. That's not exactly ideal. Is there some way for me to pass the arithmetic of $1+1 and pass it on to the next command in Windows? I assume there is some way of using STDOUT...

    Read the article

  • Is there any way to distribute x264 encoding jobs across multiple computers (to increase the encoding speed)?

    - by Breakthrough
    Does anyone know of a current, active solution to encoding x264 videos across many computers (via the network) to increase encoding FPS? Brownie points for cross-platform and open source, but just so you all know, I usually use Windows. Programs that I have heard of, and why I do not believe they are suitable: x264farm: Not actively developed. Good interface, but does not support two-pass encoding, and fails with newer x264 builds. ELDER: Again, not actively developed, but my issue was that it didn't work with new x264 builds, and it was very difficult to configure (read: randomly stopped working). While I don't absolutely need a program which is being actively developed, I would like one that supports two-pass encoding, and works with new(er) x264 builds. Additional information: So far, I've offered (and awarded!) two separate bounties on this question since I first posted it over two years ago, and I still haven't found a solution to this problem. What I'm looking for basically is a simple program to allow me to encode x264 videos using the processing power of multiple computers connected over a LAN. Furthermore, it would be nice if it worked with new(er) x264 builds, and supported two-pass encoding. If at any time someone has an updated answer, or a new solution to this problem, please post it and it will be given some consideration.

    Read the article

  • Can't get php+sqlite working

    - by facha
    Hi, everyone I'm struggling all morning to make php work with an sqlite database. Here is a piece of php code that I try to execute: #less /var/www/html/test.php <?php $db=new PDO("sqlite:/var/www/test.sql"); $sql = "insert into test (login,pass) values ('login','pass');"; $db->exec($sql); ?> Here is how I've done tests: # sqlite3 /var/www/test.sql sqlite> create table test (login varchar,pass varchar); #chown apache:apache /var/www/test.sql #chmod 644 /var/www/test.sql Here is the stuff that drives me mad: When I execute from command line: #php test.php everything goes well. Sql is being executed and I can see a new row appear in the database. When I execute the same script from a browser - sql is not being executed. I don't get a new row in the database. There are no errors in the apache log file. Please, help

    Read the article

  • How to connect to DB2 when the password ends with '!' in Windows

    - by AngocA
    I am facing a problem to use the DB2 tools when using generic account with a generated password which ends with the Bang sign '!' to connect to DB2 database. I am not allowed to change the password because it is already used by other processes. I know the user is valid and I can connect to the database with its credentials, but not from all db2 tools. When using the Control Center it is okay. When using the Command Editor (GUI) or the Command Windows, I got this error message: connect to WAREHOUS user administrator using ! SQL0104N An unexpected token "!" was found following "<identifier>". Expected tokens may include: "NEW". SQLSTATE=42601 Let's say that my password is: pass@! I am trying to use c:\>db2 connect to sample user administrator using "pass@!" or c:\>db2 connect to sample user administrator using pass@! And it both cases I got the same error message. I could change the way I connect but it is not useful for me, for example: c:\>db2 connect to sample user administrator Enter current password for administrator: But I cannot use it from a batch file easily. I would like to know how can I connect from the Command Editor, in order to use this user from the Graphical Tools. BTW, I know that the Control Center is deprecated.

    Read the article

  • How to resovle javax.mail.AuthenticationFailedException issue?

    - by jl
    Hi, I am doing a sendMail Servlet with JavaMail. I have javax.mail.AuthenticationFailedException on my output. Can anyone please help me out? Thanks. sendMailServlet code: try { String host = "smtp.gmail.com"; String from = "[email protected]"; String pass = "pass"; Properties props = System.getProperties(); props.put("mail.smtp.starttls.enable", "true"); props.put("mail.smtp.host", host); props.put("mail.smtp.user", from); props.put("mail.smtp.password", pass); props.put("mail.smtp.port", "587"); props.put("mail.smtp.auth", "true"); props.put("mail.debug", "true"); Session session = Session.getDefaultInstance(props, null); MimeMessage message = new MimeMessage(session); Address fromAddress = new InternetAddress(from); Address toAddress = new InternetAddress("[email protected]"); message.setFrom(fromAddress); message.setRecipient(Message.RecipientType.TO, toAddress); message.setSubject("Testing JavaMail"); message.setText("Welcome to JavaMail"); Transport transport = session.getTransport("smtp"); transport.connect(host, from, pass); message.saveChanges(); Transport.send(message); transport.close(); }catch(Exception ex){ out.println("<html><head></head><body>"); out.println("ERROR: " + ex); out.println("</body></html>"); } Output on GlassFish 2.1: DEBUG SMTP: trying to connect to host "smtp.gmail.com", port 587, isSSL false 220 mx.google.com ESMTP 36sm10907668yxh.13 DEBUG SMTP: connected to host "smtp.gmail.com", port: 587 EHLO platform-4cfaca 250-mx.google.com at your service, [203.126.159.130] 250-SIZE 35651584 250-8BITMIME 250-STARTTLS 250-ENHANCEDSTATUSCODES 250 PIPELINING DEBUG SMTP: Found extension "SIZE", arg "35651584" DEBUG SMTP: Found extension "8BITMIME", arg "" DEBUG SMTP: Found extension "STARTTLS", arg "" DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg "" DEBUG SMTP: Found extension "PIPELINING", arg "" STARTTLS 220 2.0.0 Ready to start TLS EHLO platform-4cfaca 250-mx.google.com at your service, [203.126.159.130] 250-SIZE 35651584 250-8BITMIME 250-AUTH LOGIN PLAIN 250-ENHANCEDSTATUSCODES 250 PIPELINING DEBUG SMTP: Found extension "SIZE", arg "35651584" DEBUG SMTP: Found extension "8BITMIME", arg "" DEBUG SMTP: Found extension "AUTH", arg "LOGIN PLAIN" DEBUG SMTP: Found extension "ENHANCEDSTATUSCODES", arg "" DEBUG SMTP: Found extension "PIPELINING", arg "" DEBUG SMTP: Attempt to authenticate AUTH LOGIN 334 VXNlcm5hbWU6 aWpveWNlbGVvbmdAZ21haWwuY29t 334 UGFzc3dvcmQ6 MTIzNDU2Nzhf 235 2.7.0 Accepted DEBUG: getProvider() returning javax.mail.Provider[TRANSPORT,smtp,com.sun.mail.smtp.SMTPTransport,Sun Microsystems, Inc] DEBUG SMTP: useEhlo true, useAuth true

    Read the article

< Previous Page | 76 77 78 79 80 81 82 83 84 85 86 87  | Next Page >