Search Results

Search found 7077 results on 284 pages for 'concurrent processing'.

Page 81/284 | < Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >

  • The Data Scientist

    - by BuckWoody
    A new term - well, perhaps not that new - has come up and I’m actually very excited about it. The term is Data Scientist, and since it’s new, it’s fairly undefined. I’ll explain what I think it means, and why I’m excited about it. In general, I’ve found the term deals at its most basic with analyzing data. Of course, we all do that, and the term itself in that definition is redundant. There is no science that I know of that does not work with analyzing lots of data. But the term seems to refer to more than the common practices of looking at data visually, putting it in a spreadsheet or report, or even using simple coding to examine data sets. The term Data Scientist (as far as I can make out this early in it’s use) is someone who has a strong understanding of data sources, relevance (statistical and otherwise) and processing methods as well as front-end displays of large sets of complicated data. Some - but not all - Business Intelligence professionals have these skills. In other cases, senior developers, database architects or others fill these needs, but in my experience, many lack the strong mathematical skills needed to make these choices properly. I’ve divided the knowledge base for someone that would wear this title into three large segments. It remains to be seen if a given Data Scientist would be responsible for knowing all these areas or would specialize. There are pretty high requirements on the math side, specifically in graduate-degree level statistics, but in my experience a company will only have a few of these folks, so they are expected to know quite a bit in each of these areas. Persistence The first area is finding, cleaning and storing the data. In some cases, no cleaning is done prior to storage - it’s just identified and the cleansing is done in a later step. This area is where the professional would be able to tell if a particular data set should be stored in a Relational Database Management System (RDBMS), across a set of key/value pair storage (NoSQL) or in a file system like HDFS (part of the Hadoop landscape) or other methods. Or do you examine the stream of data without storing it in another system at all? This is an important decision - it’s a foundation choice that deals not only with a lot of expense of purchasing systems or even using Cloud Computing (PaaS, SaaS or IaaS) to source it, but also the skillsets and other resources needed to care and feed the system for a long time. The Data Scientist sets something into motion that will probably outlast his or her career at a company or organization. Often these choices are made by senior developers, database administrators or architects in a company. But sometimes each of these has a certain bias towards making a decision one way or another. The Data Scientist would examine these choices in light of the data itself, starting perhaps even before the business requirements are created. The business may not even be aware of all the strategic and tactical data sources that they have access to. Processing Once the decision is made to store the data, the next set of decisions are based around how to process the data. An RDBMS scales well to a certain level, and provides a high degree of ACID compliance as well as offering a well-known set-based language to work with this data. In other cases, scale should be spread among multiple nodes (as in the case of Hadoop landscapes or NoSQL offerings) or even across a Cloud provider like Windows Azure Table Storage. In fact, in many cases - most of the ones I’m dealing with lately - the data should be split among multiple types of processing environments. This is a newer idea. Many data professionals simply pick a methodology (RDBMS with Star Schemas, NoSQL, etc.) and put all data there, regardless of its shape, processing needs and so on. A Data Scientist is familiar not only with the various processing methods, but how they work, so that they can choose the right one for a given need. This is a huge time commitment, hence the need for a dedicated title like this one. Presentation This is where the need for a Data Scientist is most often already being filled, sometimes with more or less success. The latest Business Intelligence systems are quite good at allowing you to create amazing graphics - but it’s the data behind the graphics that are the most important component of truly effective displays. This is where the mathematics requirement of the Data Scientist title is the most unforgiving. In fact, someone without a good foundation in statistics is not a good candidate for creating reports. Even a basic level of statistics can be dangerous. Anyone who works in analyzing data will tell you that there are multiple errors possible when data just seems right - and basic statistics bears out that you’re on the right track - that are only solvable when you understanding why the statistical formula works the way it does. And there are lots of ways of presenting data. Sometimes all you need is a “yes” or “no” answer that can only come after heavy analysis work. In that case, a simple e-mail might be all the reporting you need. In others, complex relationships and multiple components require a deep understanding of the various graphical methods of presenting data. Knowing which kind of chart, color, graphic or shape conveys a particular datum best is essential knowledge for the Data Scientist. Why I’m excited I love this area of study. I like math, stats, and computing technologies, but it goes beyond that. I love what data can do - how it can help an organization. I’ve been fortunate enough in my professional career these past two decades to work with lots of folks who perform this role at companies from aerospace to medical firms, from manufacturing to retail. Interestingly, the size of the company really isn’t germane here. I worked with one very small bio-tech (cryogenics) company that worked deeply with analysis of complex interrelated data. So  watch this space. No, I’m not leaving Azure or distributed computing or Microsoft. In fact, I think I’m perfectly situated to investigate this role further. We have a huge set of tools, from RDBMS to Hadoop to allow me to explore. And I’m happy to share what I learn along the way.

    Read the article

  • Using Node.js as an accelerator for WCF REST services

    - by Elton Stoneman
    Node.js is a server-side JavaScript platform "for easily building fast, scalable network applications". It's built on Google's V8 JavaScript engine and uses an (almost) entirely async event-driven processing model, running in a single thread. If you're new to Node and your reaction is "why would I want to run JavaScript on the server side?", this is the headline answer: in 150 lines of JavaScript you can build a Node.js app which works as an accelerator for WCF REST services*. It can double your messages-per-second throughput, halve your CPU workload and use one-fifth of the memory footprint, compared to the WCF services direct.   Well, it can if: 1) your WCF services are first-class HTTP citizens, honouring client cache ETag headers in request and response; 2) your services do a reasonable amount of work to build a response; 3) your data is read more often than it's written. In one of my projects I have a set of REST services in WCF which deal with data that only gets updated weekly, but which can be read hundreds of times an hour. The services issue ETags and will return a 304 if the client sends a request with the current ETag, which means in the most common scenario the client uses its local cached copy. But when the weekly update happens, then all the client caches are invalidated and they all need the same new data. Then the service will get hundreds of requests with old ETags, and they go through the full service stack to build the same response for each, taking up threads and processing time. Part of that processing means going off to a database on a separate cloud, which introduces more latency and downtime potential.   We can use ASP.NET output caching with WCF to solve the repeated processing problem, but the server will still be thread-bound on incoming requests, and to get the current ETags reliably needs a database call per request. The accelerator solves that by running as a proxy - all client calls come into the proxy, and the proxy routes calls to the underlying REST service. We could use Node as a straight passthrough proxy and expect some benefit, as the server would be less thread-bound, but we would still have one WCF and one database call per proxy call. But add some smart caching logic to the proxy, and share ETags between Node and WCF (so the proxy doesn't even need to call the servcie to get the current ETag), and the underlying service will only be invoked when data has changed, and then only once - all subsequent client requests will be served from the proxy cache.   I've built this as a sample up on GitHub: NodeWcfAccelerator on sixeyed.codegallery. Here's how the architecture looks:     The code is very simple. The Node proxy runs on port 8010 and all client requests target the proxy. If the client request has an ETag header then the proxy looks up the ETag in the tag cache to see if it is current - the sample uses memcached to share ETags between .NET and Node. If the ETag from the client matches the current server tag, the proxy sends a 304 response with an empty body to the client, telling it to use its own cached version of the data. If the ETag from the client is stale, the proxy looks for a local cached version of the response, checking for a file named after the current ETag. If that file exists, its contents are returned to the client as the body in a 200 response, which includes the current ETag in the header. If the proxy does not have a local cached file for the service response, it calls the service, and writes the WCF response to the local cache file, and to the body of a 200 response for the client. So the WCF service is only troubled if both client and proxy have stale (or no) caches.   The only (vaguely) clever bit in the sample is using the ETag cache, so the proxy can serve cached requests without any communication with the underlying service, which it does completely generically, so the proxy has no notion of what it is serving or what the services it proxies are doing. The relative path from the URL is used as the lookup key, so there's no shared key-generation logic between .NET and Node, and when WCF stores a tag it also stores the "read" URL against the ETag so it can be used for a reverse lookup, e.g:   Key Value /WcfSampleService/PersonService.svc/rest/fetch/3 "28cd4796-76b8-451b-adfd-75cb50a50fa6" "28cd4796-76b8-451b-adfd-75cb50a50fa6" /WcfSampleService/PersonService.svc/rest/fetch/3    In Node we read the cache using the incoming URL path as the key and we know that "28cd4796-76b8-451b-adfd-75cb50a50fa6" is the current ETag; we look for a local cached response in /caches/28cd4796-76b8-451b-adfd-75cb50a50fa6.body (and the corresponding .header file which contains the original service response headers, so the proxy response is exactly the same as the underlying service). When the data is updated, we need to invalidate the ETag cache – which is why we need the reverse lookup in the cache. In the WCF update service, we don't need to know the URL of the related read service - we fetch the entity from the database, do a reverse lookup on the tag cache using the old ETag to get the read URL, update the new ETag against the URL, store the new reverse lookup and delete the old one.   Running Apache Bench against the two endpoints gives the headline performance comparison. Making 1000 requests with concurrency of 100, and not sending any ETag headers in the requests, with the Node proxy I get 102 requests handled per second, average response time of 975 milliseconds with 90% of responses served within 850 milliseconds; going direct to WCF with the same parameters, I get 53 requests handled per second, mean response time of 1853 milliseconds, with 90% of response served within 3260 milliseconds. Informally monitoring server usage during the tests, Node maxed at 20% CPU and 20Mb memory; IIS maxed at 60% CPU and 100Mb memory.   Note that the sample WCF service does a database read and sleeps for 250 milliseconds to simulate a moderate processing load, so this is *not* a baseline Node-vs-WCF comparison, but for similar scenarios where the  service call is expensive but applicable to numerous clients for a long timespan, the performance boost from the accelerator is considerable.     * - actually, the accelerator will work nicely for any HTTP request, where the URL (path + querystring) uniquely identifies a resource. In the sample, there is an assumption that the ETag is a GUID wrapped in double-quotes (e.g. "28cd4796-76b8-451b-adfd-75cb50a50fa6") – which is the default for WCF services. I use that assumption to name the cache files uniquely, but it is a trivial change to adapt to other ETag formats.

    Read the article

  • Can't remove burg theme packages

    - by Lassi
    Today after trying to install and remove BURG and few themes I faced an issue. Now I can't install or remove anything. Here is the output (unfortunately partly in Finnish, I couldn't change language since it also seems to depend on package listings: lassi@lassi-ubuntu:~$ sudo apt-get autoremove Luetaan pakettiluetteloita... Valmis Muodostetaan riippuvuussuhteiden puu Luetaan tilatietoja... Valmis Seuraavat paketit POISTETAAN: burg-theme-fortune burg-theme-gnome burg-theme-picchio 0 päivitetty, 0 uutta asennusta, 3 poistettavaa ja 0 päivittämätöntä. 3 ei asennettu kokonaan tai poistettiin. Toiminnon jälkeen vapautuu 7 180 k t levytilaa. Haluatko jatkaa [K/e]? k (Luetaan tietokantaa... 166462 files and directories currently installed.) Poistetaan pakettia burg-theme-fortune... sudo: update-burg: command not found dpkg: virhe käsiteltäessä burg-theme-fortune (--remove): aliprosessi installed post-removal script palautti virhetilakoodin 1 Poistetaan pakettia burg-theme-gnome... sudo: update-burg: command not found dpkg: virhe käsiteltäessä burg-theme-gnome (--remove): aliprosessi installed post-removal script palautti virhetilakoodin 1 Poistetaan pakettia burg-theme-picchio... sudo: update-burg: command not found dpkg: virhe käsiteltäessä burg-theme-picchio (--remove): aliprosessi installed post-removal script palautti virhetilakoodin 1 Käsittelyssä tapahtui liian monta virhettä: burg-theme-fortune burg-theme-gnome burg-theme-picchio E: Sub-process /usr/bin/dpkg returned an error code (1) Basically what seems to happen is this: It creates the package lists, then tries to remove packet burg-theme-fortune. This fails as update-burg command was not found. Then dpkg reports an error while processing the packet. Same goes with all 3 packages. In the end it claims that there were too many errors, and packages stay installed. I also tried installing burg as it tries to run command update-burg, but appears that it tries to delete these packages always when I try to install or remove or do anything with apt. Any ideas how I could solve this issue? Edit: Here is the output of apt-get install burg (tried installing again to get English output) lassi@lassi-ubuntu:~$ LC_ALL=C sudo apt-get install burg [sudo] password for lassi: Reading package lists... Done Building dependency tree Reading state information... Done burg is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 3 not fully installed or removed. Need to get 0 B/6169 kB of archives. After this operation, 0 B of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 167497 files and directories currently installed.) Preparing to replace burg-theme-fortune 0.5.0-1 (using .../burg-theme-fortune_0.5.0-1_all.deb) ... Unpacking replacement burg-theme-fortune ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: warning: subprocess old post-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error processing /var/cache/apt/archives/burg-theme-fortune_0.5.0-1_all.deb (--unpack): subprocess new post-removal script returned error exit status 1 Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 1 Preparing to replace burg-theme-gnome 0.5.0-1 (using .../burg-theme-gnome_0.5.0-1_all.deb) ... Unpacking replacement burg-theme-gnome ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: warning: subprocess old post-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error processing /var/cache/apt/archives/burg-theme-gnome_0.5.0-1_all.deb (--unpack): subprocess new post-removal script returned error exit status 1 Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 1 Preparing to replace burg-theme-picchio 0.5.0-1 (using .../burg-theme-picchio_0.5.0-1_all.deb) ... Unpacking replacement burg-theme-picchio ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: warning: subprocess old post-removal script returned error exit status 1 dpkg - trying script from the new package instead ... Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error processing /var/cache/apt/archives/burg-theme-picchio_0.5.0-1_all.deb (--unpack): subprocess new post-removal script returned error exit status 1 Generating burg.cfg ... /usr/sbin/burg-probe: error: cannot stat `/boot/burg/locale'. No path or device is specified. Try `/usr/sbin/burg-probe --help' for more information. dpkg: error while cleaning up: subprocess new post-removal script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/burg-theme-fortune_0.5.0-1_all.deb /var/cache/apt/archives/burg-theme-gnome_0.5.0-1_all.deb /var/cache/apt/archives/burg-theme-picchio_0.5.0-1_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) lassi@lassi-ubuntu:~$

    Read the article

  • Algorithm for Shortest Job First with Preemption

    - by Shray
    I want to implement a shortest job first routine using C# or C++. Priority of Jobs are based on their processing time. Jobs are processed using a binary (min) heap. There are three types of jobs. Type 1 is when jobs come in between every 4-6 seconds, with processing times between 4-6. Type 2 job comes in between 8-12 seconds, with processing times between 8-12. Type 3 job comes in between 24-26 seconds, with processing times between 14-16. So far, I have written the binary heap functionality, but Im kinda confused on how to start processing spawn and also the processor. #include <iostream> #include <stdlib.h> #include <time.h> using namespace std; int timecounting = 20; struct process{ int atime; int ptime; int type; }; class pque{ private: int count; public: process pheap[100]; process type1[100]; process type2[100]; process type3[100]; process type4[100]; pque(){ count = 0; } void swap(int a, int b){ process tempa = pheap[a]; process tempb = pheap[b]; pheap[b] = tempa; pheap[a] = tempb; } void add(process c){ int current; count++; pheap[count] = c; if(count > 0){ current = count; while(pheap[count/2].ptime > pheap[current].ptime){ swap(current/2, current); current = current/2; } } } void remove(){ process temp = pheap[1]; // saves process to temporary pheap[1] = pheap[count]; //takes last process in heap, and puts it at the root int n = 1; int leftchild = 2*n; int rightchild = 2*n + 1; while(leftchild < count && rightchild < count) { if(pheap[leftchild].ptime > pheap[rightchild].ptime) { if(pheap[leftchild].ptime > pheap[n].ptime) { swap(leftchild, n); n = leftchild; int leftchild = 2*n; int rightchild = 2*n + 1; } } else { if(pheap[rightchild].ptime > pheap[n].ptime) { swap(rightchild, n); n = rightchild; int leftchild = 2*n; int rightchild = 2*n + 1; } } } } void spawn1(){ process p; process p1; p1.atime = 0; int i = 0; srand(time(NULL)); while(i < timecounting) { p.atime = rand()%3 + 4 + p1.atime; p.ptime = rand()%5 + 1; p1.atime = p.atime; p.type = 1; type1[i+1] = p; i++; } } void spawn2(){ process p; process p1; p1.atime = 0; srand(time(NULL)); int i = 0; while(i < timecounting) { p.atime = rand()%3 + 9 + p1.atime; p.ptime = rand()%5 + 6; p1.atime = p.atime; p.type = 2; type2[i+1] = p; i++; } } void spawn3(){ process p; process p1; p1.atime = 0; srand(time(NULL)); int i = 0; while(i < timecounting) { p.atime = rand()%3 + 25 + p1.atime; p.ptime = rand()%5 + 11; p1.atime = p.atime; p.type = 3; type3[i+1] = p; i++; } } void spawn4(){ process p; process p1; p1.atime = 0; srand(time(NULL)); int i = 0; while(i < timecounting) { p.atime = rand()%6 + 30 + p1.atime; p.ptime = rand()%5 + 8; p1.atime = p.atime; p.type = 4; type4[i+1] = p; i++; } } void processor() { process p; process p1; p1.atime = 0; int n = 1; int n1 = 1; int n2 = 1; for(int i = 0; i<timecounting;i++) { if(type1[n].atime == i) { add(type1[n]); n++; } if(type2[n1].atime == i) { add(type1[n1]); n1++; } if(type3[n2].atime == i) { add(type1[n2]); n2++; } /* if(pheap[1].atime <= i) { while(pheap[1].atime != 0){ pheap[1].atime--; i++; } remove(); }*/ } } };

    Read the article

  • Ubuntu 12.04 wireless (wifi) not working, can not upgrade to 12.10, touchpad gestures not working. What to do?

    - by Ritwik
    I installed ubuntu 12.04 LTS 3 days ago and since then wireless feature and touchpad gestures are not working. Tried everything on internet but still unsuccessful. I cant upgrade to ubuntu 12.10. These are the following comments I tried. Please help me. EDIT: just realized usb 3.0 is also not working. COMMAND lsb_release -r OUTPUT ----------------------------------------------------------------- Release: 12.04 ----------------------------------------------------------------- COMMAND lspci OUTPUT ------------------------------------------------------------------ 00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller (rev 06) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller (rev 06) 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x8 Controller (rev 06) 00:02.0 VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller (rev 06) 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) 00:14.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI (rev 05) 00:16.0 Communication controller: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 (rev d5) 00:1c.1 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #2 (rev d5) 00:1c.2 PCI bridge: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 (rev d5) 00:1d.0 USB controller: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation HM86 Express LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] (rev 05) 00:1f.3 SMBus: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller (rev 05) 07:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M / GT 620M/625M/630M/720M] (rev a1) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07) 09:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01) 0f:00.0 Network controller: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter (rev 01) ------------------------------------------------------------------ COMMAND sudo apt-get install linux-backports-modules-wireless-lucid-generic OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done E: Unable to locate package linux-backports-modules-wireless-lucid-generic ------------------------------------------------------------------- COMMAND cat /etc/lsb-release; uname -a OUTPUT ------------------------------------------------------------------- DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.5 LTS" Linux ritwik-PC 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:46:11 UTC 2014 x86_64 x86_64 x86_64 GNU/Linux ------------------------------------------------------------------- COMMAND lspci -nnk | grep -iA2 net OUTPUT ------------------------------------------------------------------- 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 07) Subsystem: Hewlett-Packard Company Device [103c:225d] Kernel driver in use: r8169 -- 0f:00.0 Network controller [0280]: Qualcomm Atheros QCA9565 / AR9565 Wireless Network Adapter [168c:0036] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:217f] ------------------------------------------------------------------- COMMAND lsusb OUTPUT ------------------------------------------------------------------- Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 002 Device 002: ID 8087:8000 Intel Corp. ------------------------------------------------------------------- COMMAND iwconfig OUTPUT ------------------------------------------------------------------- lo no wireless extensions. eth0 no wireless extensions. ------------------------------------------------------------------- COMMAND rfkill list all OUTPUT ------------------------------------------------------------------- 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-bluetooth: Bluetooth Soft blocked: no Hard blocked: no ------------------------------------------------------------------- COMMAND lsmod OUTPUT ------------------------------------------------------------------- Module Size Used by snd_hda_codec_realtek 224215 1 bnep 18281 2 rfcomm 47604 0 bluetooth 180113 10 bnep,rfcomm parport_pc 32866 0 ppdev 17113 0 nls_iso8859_1 12713 1 nls_cp437 16991 1 vfat 17585 1 fat 61512 1 vfat snd_hda_intel 33719 3 snd_hda_codec 127706 2 snd_hda_codec_realtek,snd_hda_intel snd_hwdep 17764 1 snd_hda_codec snd_pcm 97275 2 snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61929 2 snd_seq_midi,snd_seq_midi_event nouveau 775039 0 joydev 17693 0 snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq ttm 76949 1 nouveau uvcvideo 72627 0 snd 79041 15 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device videodev 98259 1 uvcvideo drm_kms_helper 46978 1 nouveau psmouse 98051 0 drm 241971 3 nouveau,ttm,drm_kms_helper i2c_algo_bit 13423 1 nouveau soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm v4l2_compat_ioctl32 17128 1 videodev hp_wmi 18092 0 serio_raw 13211 0 sparse_keymap 13890 1 hp_wmi mxm_wmi 13021 1 nouveau video 19651 1 nouveau wmi 19256 2 hp_wmi,mxm_wmi mac_hid 13253 0 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp r8169 62190 0 ------------------------------------------------------------------- COMMAND sudo su modprobe -v ath9k OUTPUT ------------------------------------------------------------------- insmod /lib/modules/3.2.0-67-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_hw.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k_common.ko insmod /lib/modules/3.2.0-67-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.2.0-67-generic/kernel/drivers/net/wireless/ath/ath9k/ath9k.ko ------------------------------------------------------------------- COMMAND do-release-upgrade OUTPUT ------------------------------------------------------------------- Err Upgrade tool signature 404 Not Found [IP: 91.189.88.149 80] Err Upgrade tool 404 Not Found [IP: 91.189.88.149 80] Fetched 0 B in 0s (0 B/s) WARNING:root:file 'quantal.tar.gz.gpg' missing Failed to fetch Fetching the upgrade failed. There may be a network problem. ------------------------------------------------------------------- COMMAND sudo modprobe ath9k dmesg | grep ath9k NO OUTPUT FOR THEM COMMAND dmesg | grep -e ath -e 80211 OUTPUT ------------------------------------------------------------------- [ 13.232372] type=1400 audit(1408867538.399:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=975 comm="apparmor_parser" [ 13.232615] type=1400 audit(1408867538.399:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/telepathy-*" pid=975 comm="apparmor_parser" [ 15.186599] ath3k: probe of 3-4:1.0 failed with error -110 [ 15.186635] usbcore: registered new interface driver ath3k [ 88.219329] cfg80211: Calling CRDA to update world regulatory domain [ 88.351665] cfg80211: World regulatory domain updated: [ 88.351667] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 88.351670] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351671] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351673] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 88.351674] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 88.351675] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) ------------------------------------------------------------------- COMMAND sudo apt-get install touchpad-indicator OUTPUT ------------------------------------------------------------------- Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: gir1.2-gconf-2.0 python-pyudev Suggested packages: python-qt4 python-pyside.qtcore The following NEW packages will be installed: gir1.2-gconf-2.0 python-pyudev touchpad-indicator 0 upgraded, 3 newly installed, 0 to remove and 0 not upgraded. Need to get 84.1 kB of archives. After this operation, 1,136 kB of additional disk space will be used. Do you want to continue [Y/n]? Y Get:1 http://ppa.launchpad.net/atareao/atareao/ubuntu/ precise/main touchpad-indicator all 0.9.3.12-1ubuntu1 [46.5 kB] Get:2 http://archive.ubuntu.com/ubuntu/ precise/main gir1.2-gconf-2.0 amd64 3.2.5-0ubuntu2 [7,098 B] Get:3 http://archive.ubuntu.com/ubuntu/ precise/main python-pyudev all 0.13-1 [30.5 kB] Fetched 84.1 kB in 2s (31.6 kB/s) Selecting previously unselected package gir1.2-gconf-2.0. (Reading database ... 169322 files and directories currently installed.) Unpacking gir1.2-gconf-2.0 (from .../gir1.2-gconf-2.0_3.2.5-0ubuntu2_amd64.deb) ... Selecting previously unselected package python-pyudev. Unpacking python-pyudev (from .../python-pyudev_0.13-1_all.deb) ... Selecting previously unselected package touchpad-indicator. Unpacking touchpad-indicator (from .../touchpad-indicator_0.9.3.12-1ubuntu1_all.deb) ... Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for desktop-file-utils ... Processing triggers for gnome-menus ... Processing triggers for hicolor-icon-theme ... Processing triggers for software-center ... INFO:softwarecenter.db.update:no translation information in database needed Setting up gir1.2-gconf-2.0 (3.2.5-0ubuntu2) ... Setting up python-pyudev (0.13-1) ... Setting up touchpad-indicator (0.9.3.12-1ubuntu1) ... ------------------------------------------------------------------- Not able to find ( drivers/net/wireless/ath/ath9k/hw.c ) or ( drivers/net/wireless/ath/ath9k/hw.h )

    Read the article

  • Throttling in OSB

    - by Knut Vatsendvik
    Technorati Tags: soa,integration,osb,throttling,overload protection A common problem with integration is the risk of overloading a particular web service. When the capacity of a web service is reached and it continues to accept connections, it will most likely start to deteriorate. Fortunately there are 2 techniques, with Oracle Service Bus, that you can apply for protecting this from happening. You can either limit the concurrent number of requests for a Business Service (outbound requests) or you can limit the number of threads processing the requests for a Proxy Service (inbound requests). Limiting the Concurrent Number of Requests Limiting the concurrent requests for a Business Service cannot be set at design time so you have to use the built-in Oracle Service Bus Administration Console to do it (/sbconsole). Follow these steps to enable it: In Change Center, click Create to start a new Session Select Project Explorer, and navigate to the Business Service you want to limit Select the Operational Settings tab of the View a Business Service page In this tab, under Throttling, select the Enable check box. By enabling throttling you Specify a value for Maximum Concurrency Specify a positive integer value for Throttling Queue to backlog messages that has exceeded the message concurrency limit Specify the maximum time in milliseconds for Message Expiration a message can spend in Throttling Queue Click Update Click Active in Change Center to active the new settings If you re-publish the service, it will not overwrite the settings. Only if the resource is renamed or moved, it will. Please note that a throttling queue is an in-memory queue. Messages that are placed in this queue are not recoverable when a server fails or when you restart a server. Limiting the Number of Threads A better approach, in my opinion, is to limit the number of threads that can work with request. Follow these steps to do it: Open the WebLogic Server Console (/console) In Change Center, click Create to start a new Session In the left pane expand Environment and select Work Managers In the Global Work Managers page, click New    Click the Work Manager radio button, then click Next Enter a Name for the new Work Manager, and click Next In the Available Targets list, select server instances or clusters on which you will deploy applications that reference the Work Manager Click Finish. The new Work Manager now appears in the Global Work Managers page. Select the new Work Manager Right next to the Maximum Threads Constraint drop-down box, click New   Click the Maximum Threads Constraint radio button, then click Next Enter a Name and a thread Count to be the maximum size to allocate for requests. Click Next  In the Available Targets list, select server instances or clusters on which you will deploy applications that reference the Work Manager Click Finish Click Save Click Active in Change Center to active your changes.  A restart may be necessary.   Puh! Almost there. Start a new session. Go to the Service Bus Console (/sbconsole) and find your consuming Proxy Service. Click the Edit button of the Transport Configuration tab. Click Next Set the Dispatch Policy to the new Work Manager Click Last Click Save Click Active in Change Center to active your changes. 

    Read the article

  • Flow-Design Cheat Sheet &ndash; Part I, Notation

    - by Ralf Westphal
    You want to avoid the pitfalls of object oriented design? Then this is the right place to start. Use Flow-Oriented Analysis (FOA) and –Design (FOD or just FD for Flow-Design) to understand a problem domain and design a software solution. Flow-Orientation as described here is related to Flow-Based Programming, Event-Based Programming, Business Process Modelling, and even Event-Driven Architectures. But even though “thinking in flows” is not new, I found it helpful to deviate from those precursors for several reasons. Some aim at too big systems for the average programmer, some are concerned with only asynchronous processing, some are even not very much concerned with programming at all. What I was looking for was a design method to help in software projects of any size, be they large or tiny, involing synchronous or asynchronous processing, being local or distributed, running on the web or on the desktop or on a smartphone. That´s why I took ideas from all of the above sources and some additional and came up with Event-Based Components which later got repositioned and renamed to Flow-Design. In the meantime this has generated some discussion (in the German developer community) and several teams have started to work with Flow-Design. Also I´ve conducted quite some trainings using Flow-Orientation for design. The results are very promising. Developers find it much easier to design software using Flow-Orientation than OOAD-based object orientation. Since Flow-Orientation is moving fast and is not covered completely by a single source like a book, demand has increased for at least an overview of the current state of its notation. This page is trying to answer this demand by briefly introducing/describing every notational element as well as their translation into C# source code. Take this as a cheat sheet to put next to your whiteboard when designing software. However, please do not expect any explanation as to the reasons behind Flow-Design elements. Details on why Flow-Design at all and why in this specific way you´ll find in the literature covering the topic. Here´s a resource page on Flow-Design/Event-Based Components, if you´re able to read German. Notation Connected Functional Units The basic element of any FOD are functional units (FU): Think of FUs as some kind of software code block processing data. For the moment forget about classes, methods, “components”, assemblies or whatever. See a FU as an abstract piece of code. Software then consists of just collaborating FUs. I´m using circles/ellipses to draw FUs. But if you like, use rectangles. Whatever suites your whiteboard needs best.   The purpose of FUs is to process input and produce output. FUs are transformational. However, FUs are not called and do not call other FUs. There is no dependency between FUs. Data just flows into a FU (input) and out of it (output). From where and where to is of no concern to a FU.   This way FUs can be concatenated in arbitrary ways:   Each FU can accept input from many sources and produce output for many sinks:   Flows Connected FUs form a flow with a start and an end. Data is entering a flow at a source, and it´s leaving it through a sink. Think of sources and sinks as special FUs which conntect wires to the environment of a network of FUs.   Wiring Details Data is flowing into/out of FUs through wires. This is to allude to electrical engineering which since long has been working with composable parts. Wires are attached to FUs usings pins. They are the entry/exit points for the data flowing along the wires. Input-/output pins currently need not be drawn explicitly. This is to keep designing on a whiteboard simple and quick.   Data flowing is of some type, so wires have a type attached to them. And pins have names. If there is only one input pin and output pin on a FU, though, you don´t need to mention them. The default is Process for a single input pin, and Result for a single output pin. But you´re free to give even single pins different names.   There is a shortcut in use to address a certain pin on a destination FU:   The type of the wire is put in parantheses for two reasons. 1. This way a “no-type” wire can be easily denoted, 2. this is a natural way to describe tuples of data.   To describe how much data is flowing, a star can be put next to the wire type:   Nesting – Boards and Parts If more than 5 to 10 FUs need to be put in a flow a FD starts to become hard to understand. To keep diagrams clutter free they can be nested. You can turn any FU into a flow: This leads to Flow-Designs with different levels of abstraction. A in the above illustration is a high level functional unit, A.1 and A.2 are lower level functional units. One of the purposes of Flow-Design is to be able to describe systems on different levels of abstraction and thus make it easier to understand them. Humans use abstraction/decomposition to get a grip on complexity. Flow-Design strives to support this and make levels of abstraction first class citizens for programming. You can read the above illustration like this: Functional units A.1 and A.2 detail what A is supposed to do. The whole of A´s responsibility is decomposed into smaller responsibilities A.1 and A.2. FU A thus does not do anything itself anymore! All A is responsible for is actually accomplished by the collaboration between A.1 and A.2. Since A now is not doing anything anymore except containing A.1 and A.2 functional units are devided into two categories: boards and parts. Boards are just containing other functional units; their sole responsibility is to wire them up. A is a board. Boards thus depend on the functional units nested within them. This dependency is not of a functional nature, though. Boards are not dependent on services provided by nested functional units. They are just concerned with their interface to be able to plug them together. Parts are the workhorses of flows. They contain the real domain logic. They actually transform input into output. However, they do not depend on other functional units. Please note the usage of source and sink in boards. They correspond to input-pins and output-pins of the board.   Implicit Dependencies Nesting functional units leads to a dependency tree. Boards depend on nested functional units, they are the inner nodes of the tree. Parts are independent, they are the leafs: Even though dependencies are the bane of software development, Flow-Design does not usually draw these dependencies. They are implicitly created by visually nesting functional units. And they are harmless. Boards are so simple in their functionality, they are little affected by changes in functional units they are depending on. But functional units are implicitly dependent on more than nested functional units. They are also dependent on the data types of the wires attached to them: This is also natural and thus does not need to be made explicit. And it pertains mainly to parts being dependent. Since boards don´t do anything with regard to a problem domain, they don´t care much about data types. Their infrastructural purpose just needs types of input/output-pins to match.   Explicit Dependencies You could say, Flow-Orientation is about tackling complexity at its root cause: that´s dependencies. “Natural” dependencies are depicted naturally, i.e. implicitly. And whereever possible dependencies are not even created. Functional units don´t know their collaborators within a flow. This is core to Flow-Orientation. That makes for high composability of functional units. A part is as independent of other functional units as a motor is from the rest of the car. And a board is as dependend on nested functional units as a motor is on a spark plug or a crank shaft. With Flow-Design software development moves closer to how hardware is constructed. Implicit dependencies are not enough, though. Sometimes explicit dependencies make designs easier – as counterintuitive this might sound. So FD notation needs a ways to denote explicit dependencies: Data flows along wires. But data does not flow along dependency relations. Instead dependency relations represent service calls. Functional unit C is depending on/calling services on functional unit S. If you want to be more specific, name the services next to the dependency relation: Although you should try to stay clear of explicit dependencies, they are fundamentally ok. See them as a way to add another dimension to a flow. Usually the functionality of the independent FU (“Customer repository” above) is orthogonal to the domain of the flow it is referenced by. If you like emphasize this by using different shapes for dependent and independent FUs like above. Such dependencies can be used to link in resources like databases or shared in-memory state. FUs can not only produce output but also can have side effects. A common pattern for using such explizit dependencies is to hook a GUI into a flow as the source and/or the sink of data: Which can be shortened to: Treat FUs others depend on as boards (with a special non-FD API the dependent part is connected to), but do not embed them in a flow in the diagram they are depended upon.   Attributes of Functional Units Creation and usage of functional units can be modified with attributes. So far the following have shown to be helpful: Singleton: FUs are by default multitons. FUs in the same of different flows with the same name refer to the same functionality, but to different instances. Think of functional units as objects that get instanciated anew whereever they appear in a design. Sometimes though it´s helpful to reuse the same instance of a functional unit; this is always due to valuable state it holds. Signify this by annotating the FU with a “(S)”. Multiton: FUs on which others depend are singletons by default. This is, because they usually are introduced where shared state comes into play. If you want to change them to be a singletons mark them with a “(M)”. Configurable: Some parts need to be configured before the can do they work in a flow. Annotate them with a “(C)” to have them initialized before any data items to be processed by them arrive. Do not assume any order in which FUs are configured. How such configuration is happening is an implementation detail. Entry point: In each design there needs to be a single part where “it all starts”. That´s the entry point for all processing. It´s like Program.Main() in C# programs. Mark the entry point part with an “(E)”. Quite often this will be the GUI part. How the entry point is started is an implementation detail. Just consider it the first FU to start do its job.   Patterns / Standard Parts If more than a single wire is attached to an output-pin that´s called a split (or fork). The same data is flowing on all of the wires. Remember: Flow-Designs are synchronous by default. So a split does not mean data is processed in parallel afterwards. Processing still happens synchronously and thus one branch after another. Do not assume any specific order of the processing on the different branches after the split.   It is common to do a split and let only parts of the original data flow on through the branches. This effectively means a map is needed after a split. This map can be implicit or explicit.   Although FUs can have multiple input-pins it is preferrable in most cases to combine input data from different branches using an explicit join: The default output of a join is a tuple of its input values. The default behavior of a join is to output a value whenever a new input is received. However, to produce its first output a join needs an input for all its input-pins. Other join behaviors can be: reset all inputs after an output only produce output if data arrives on certain input-pins

    Read the article

  • Problem with AssetManager while loading a Model type

    - by user1204548
    Today I've tried the AssetManager for the first time with .g3db files and I'm having some problems. Exception in thread "LWJGL Application" com.badlogic.gdx.utils.GdxRuntimeException: com.badlogic.gdx.utils.GdxRuntimeException: Couldn't load dependencies of asset: data/data at com.badlogic.gdx.assets.AssetManager.handleTaskError(AssetManager.java:508) at com.badlogic.gdx.assets.AssetManager.update(AssetManager.java:342) at com.lostchg.martagdx3d.MartaGame.render(MartaGame.java:78) at com.badlogic.gdx.Game.render(Game.java:46) at com.badlogic.gdx.backends.lwjgl.LwjglApplication.mainLoop(LwjglApplication.java:207) at com.badlogic.gdx.backends.lwjgl.LwjglApplication$1.run(LwjglApplication.java:114) Caused by: com.badlogic.gdx.utils.GdxRuntimeException: Couldn't load dependencies of asset: data/data at com.badlogic.gdx.assets.AssetLoadingTask.handleAsyncLoader(AssetLoadingTask.java:119) at com.badlogic.gdx.assets.AssetLoadingTask.update(AssetLoadingTask.java:89) at com.badlogic.gdx.assets.AssetManager.updateTask(AssetManager.java:445) at com.badlogic.gdx.assets.AssetManager.update(AssetManager.java:340) ... 4 more Caused by: com.badlogic.gdx.utils.GdxRuntimeException: com.badlogic.gdx.utils.GdxRuntimeException: Couldn't load file: data/data at com.badlogic.gdx.utils.async.AsyncResult.get(AsyncResult.java:31) at com.badlogic.gdx.assets.AssetLoadingTask.handleAsyncLoader(AssetLoadingTask.java:117) ... 7 more Caused by: com.badlogic.gdx.utils.GdxRuntimeException: Couldn't load file: data/data at com.badlogic.gdx.graphics.Pixmap.<init>(Pixmap.java:140) at com.badlogic.gdx.assets.loaders.TextureLoader.loadAsync(TextureLoader.java:72) at com.badlogic.gdx.assets.loaders.TextureLoader.loadAsync(TextureLoader.java:41) at com.badlogic.gdx.assets.AssetLoadingTask.call(AssetLoadingTask.java:69) at com.badlogic.gdx.assets.AssetLoadingTask.call(AssetLoadingTask.java:34) at com.badlogic.gdx.utils.async.AsyncExecutor$2.call(AsyncExecutor.java:49) at java.util.concurrent.FutureTask.run(Unknown Source) at java.util.concurrent.ThreadPoolExecutor.runWorker(Unknown Source) at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source) at java.lang.Thread.run(Unknown Source) Caused by: com.badlogic.gdx.utils.GdxRuntimeException: File not found: data\data (Internal) at com.badlogic.gdx.files.FileHandle.read(FileHandle.java:132) at com.badlogic.gdx.files.FileHandle.length(FileHandle.java:586) at com.badlogic.gdx.files.FileHandle.readBytes(FileHandle.java:220) at com.badlogic.gdx.graphics.Pixmap.<init>(Pixmap.java:137) ... 9 more Why it tries to load that unexisting file? It seems that the AssetManager manages to load my .g3db file at first, because earlier the java console threw some errors related to the textures associated to the 3D scene having to be a power of 2. Relevant code: public void show() { ... assets = new AssetManager(); assets.load("data/levelprueba2.g3db", Model.class); loading = true; ... } private void doneLoading() { Model model = assets.get("data/levelprueba2.g3db", Model.class); for (int i = 0; i < model.nodes.size; i++) { String id = model.nodes.get(i).id; ModelInstance instance = new ModelInstance(model, id); Node node = instance.getNode(id); instance.transform.set(node.globalTransform); node.translation.set(0,0,0); node.scale.set(1,1,1); node.rotation.idt(); instance.calculateTransforms(); instances.add(instance); } loading = false; } public void render(float delta) { super.render(delta); if (loading && assets.update()) doneLoading(); ... } The error points to the line with the assets.update() method. Please, help! Sorry for my bad English and my amateurish doubts.

    Read the article

  • World Record Siebel PSPP Benchmark on SPARC T4 Servers

    - by Brian
    Oracle's SPARC T4 servers set a new World Record for Oracle's Siebel Platform Sizing and Performance Program (PSPP) benchmark suite. The result used Oracle's Siebel Customer Relationship Management (CRM) Industry Applications Release 8.1.1.4 and Oracle Database 11g Release 2 running Oracle Solaris on three SPARC T4-2 and two SPARC T4-1 servers. The SPARC T4 servers running the Siebel PSPP 8.1.1.4 workload which includes Siebel Call Center and Order Management System demonstrates impressive throughput performance of the SPARC T4 processor by achieving 29,000 users. This is the first Siebel PSPP 8.1.1.4 benchmark supporting 29,000 concurrent users with a rate of 239,748 Business Transactions/hour. The benchmark demonstrates vertical and horizontal scalability of Siebel CRM Release 8.1.1.4 on SPARC T4 servers. Performance Landscape Systems Txn/hr Users Call Center Order Management Response Times (sec) 1 x SPARC T4-1 (1 x SPARC T4 2.85 GHz) – Web 3 x SPARC T4-2 (2 x SPARC T4 2.85 GHz) – App/Gateway 1 x SPARC T4-1 (1 x SPARC T4 2.85 GHz) – DB 239,748 29,000 0.165 0.925 Oracle: Call Center + Order Management Transactions: 197,128 + 42,620 Users: 20300 + 8700 Configuration Summary Web Server Configuration: 1 x SPARC T4-1 server 1 x SPARC T4 processor, 2.85 GHz 128 GB memory Oracle Solaris 10 8/11 iPlanet Web Server 7 Application Server Configuration: 3 x SPARC T4-2 servers, each with 2 x SPARC T4 processor, 2.85 GHz 256 GB memory 3 x 300 GB SAS internal disks Oracle Solaris 10 8/11 Siebel CRM 8.1.1.5 SIA Database Server Configuration: 1 x SPARC T4-1 server 1 x SPARC T4 processor, 2.85 GHz 128 GB memory Oracle Solaris 11 11/11 Oracle Database 11g Release 2 (11.2.0.2) Storage Configuration: 1 x Sun Storage F5100 Flash Array 80 x 24 GB flash modules Benchmark Description Siebel 8.1 PSPP benchmark includes Call Center and Order Management: Siebel Financial Services Call Center – Provides the most complete solution for sales and service, allowing customer service and telesales representatives to provide superior customer support, improve customer loyalty, and increase revenues through cross-selling and up-selling. High-level description of the use cases tested: Incoming Call Creates Opportunity, Quote and Order and Incoming Call Creates Service Request . Three complex business transactions are executed simultaneously for specific number of concurrent users. The ratios of these 3 scenarios were 30%, 40%, 30% respectively, which together were totaling 70% of all transactions simulated in this benchmark. Between each user operation and the next one, the think time averaged approximately 10, 13, and 35 seconds respectively. Siebel Order Management – Oracle's Siebel Order Management allows employees such as salespeople and call center agents to create and manage quotes and orders through their entire life cycle. Siebel Order Management can be tightly integrated with back-office applications allowing users to perform tasks such as checking credit, confirming availability, and monitoring the fulfillment process. High-level description of the use cases tested: Order & Order Items Creation and Order Updates. Two complex Order Management transactions were executed simultaneously for specific number of concurrent users concurrently with aforementioned three Call Center scenarios above. The ratio of these 2 scenarios was 50% each, which together were totaling 30% of all transactions simulated in this benchmark. Between each user operation and the next one, the think time averaged approximately 20 and 67 seconds respectively. Key Points and Best Practices No processor cores or cache were activated or deactivated on the SPARC T-Series systems to achieve special benchmark effects. See Also Siebel White Papers SPARC T4-1 Server oracle.com OTN SPARC T4-2 Server oracle.com OTN Siebel CRM oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 30 September 2012.

    Read the article

  • AWS S3 status code 403 SignatureDoesNotMatch - Check your key and signing method

    - by Matt
    i have checked a rechecked my keys and they are correct but i keep the below Exception whenever i try to upload, can anyone shed some light on this problem? 11-01 09:21:26.331: W/System.err(13934): AmazonS3Exception: Status Code: 403, AWS Service: Amazon S3, AWS Request ID: B97CC81E13D81XXX, AWS Error Code: SignatureDoesNotMatch, AWS Error Message: The request signature we calculated does not match the signature you provided. Check your key and signing method., S3 Extended Request ID: PPieuQpqElIizNBQPc42JwC4WnBkUciCKRT5S4HSftBraeacN8y0lKfsVP9LXXXX 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.http.AmazonHttpClient.handleErrorResponse(AmazonHttpClient.java:659) 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.http.AmazonHttpClient.executeHelper(AmazonHttpClient.java:330) 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.http.AmazonHttpClient.execute(AmazonHttpClient.java:182) 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.services.s3.AmazonS3Client.invoke(AmazonS3Client.java:3038) 11-01 09:21:26.331: W/System.err(13934): at com.amazonaws.services.s3.AmazonS3Client.putObject(AmazonS3Client.java:1218) 11-01 09:21:26.331: W/System.err(13934): at com.apprssd.capsule.S3UploaderActivity$S3PutObjectTask.doInBackground(S3UploaderActivity.java:165) 11-01 09:21:26.331: W/System.err(13934): at com.apprssd.capsule.S3UploaderActivity$S3PutObjectTask.doInBackground(S3UploaderActivity.java:1) 11-01 09:21:26.331: W/System.err(13934): at android.os.AsyncTask$2.call(AsyncTask.java:287) 11-01 09:21:26.331: W/System.err(13934): at java.util.concurrent.FutureTask.run(FutureTask.java:234) 11-01 09:21:26.341: W/System.err(13934): at android.os.AsyncTask$SerialExecutor$1.run(AsyncTask.java:230) 11-01 09:21:26.341: W/System.err(13934): at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1080) 11-01 09:21:26.341: W/System.err(13934): at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:573) 11-01 09:21:26.341: W/System.err(13934): at java.lang.Thread.run(Thread.java:841) It happens during the below. PutObjectRequest por = new PutObjectRequest( Constants.getDataBucket(), selectedZip.toString(), selectedZip); s3Client.putObject(por);

    Read the article

  • Weblogic 10.3.0 : Loosing a stateless session bean in the bean pool

    - by KlasE
    Hi, We have a strange situation where we loose a Stateless SessionBean in a Bean Pool in Weblogic 10.3.0 Since we only have one bean in the pool, this effectively hangs all incoming calls. We do not want more than one instance in the pool because of application restrictions. In the Weblogic admin console, we can see that there are 1 instance in the bean pool, 0 beans in use and 1 waiting incoming request. The question is, what can have caused the system to not send the request to the one obviously free bean instance? This happens after several hours and over 100000 incoming requests, and the same scenario worked fine in the old weblogic 8 environment. We get the following stacktrace: "[ACTIVE] ExecuteThread: '5' for queue: 'weblogic.kernel.Default (self-tuning)'" waiting for lock java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject@b0d484 TIMED_WAITING sun.misc.Unsafe.park(Native Method) java.util.concurrent.locks.LockSupport.parkNanos(LockSupport.java:198) java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(AbstractQueuedSynchronizer.java:2054) weblogic.ejb.container.pool.StatelessSessionPool.waitForBean(StatelessSessionPool.java:269) weblogic.ejb.container.pool.StatelessSessionPool.getBean(StatelessSessionPool.java:111) weblogic.ejb.container.manager.StatelessManager.preInvoke(StatelessManager.java:148) weblogic.ejb.container.internal.BaseRemoteObject.preInvoke(BaseRemoteObject.java:227) weblogic.ejb.container.internal.StatelessRemoteObject.preInvoke(StatelessRemoteObject.java:52) com.mycompany.beans.MessageLogFacace_n73y0z_EOImpl.isMyStuffValid(MessageLogFacace_n73y0z_EOImpl.java:261) com.mycompany.beans.MessageLogFacace_n73y0z_EOImpl_WLSkel.invoke(Unknown Source) weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:589) weblogic.rmi.cluster.ClusterableServerRef.invoke(ClusterableServerRef.java:230) weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:477) weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363) weblogic.security.service.SecurityManager.runAs(Unknown Source) weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:473) weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118) weblogic.work.ExecuteThread.execute(ExecuteThread.java:201) weblogic.work.ExecuteThread.run(ExecuteThread.java:173) Any help would be very welcome. Regards Klas

    Read the article

  • Passing an object as parameter from Andriod to web service using ksoap

    - by user3718626
    I have an object called User which implements KvmSerializable. Would like to pass this object to the webservice. PropertyInfo pi = new PropertyInfo(); pi.setName("obj"); pi.setValue(user); pi.setType(user.getClass()); request.addProperty(pi); SoapSerializationEnvelope envelope = new SoapSerializationEnvelope(SoapEnvelope.VER11); envelope.setOutputSoapObject(request); envelope.addMapping(NAMESPACE, "User",User.class); HttpTransportSE androidHttpTransport = new HttpTransportSE(URL); I get the following error.... SoapFault - faultcode: 'soapenv:Server' faultstring: 'Unknow type {http://users.com}User' faultactor: 'null' detail: org.kxml2.kdom.Node@53263024 at org.ksoap2.serialization.SoapSerializationEnvelope.parseBody(SoapSerializationEnvelope.java:141) at org.ksoap2.SoapEnvelope.parse(SoapEnvelope.java:140) at org.ksoap2.transport.Transport.parseResponse(Transport.java:118) at org.ksoap2.transport.HttpTransportSE.call(HttpTransportSE.java:272) at org.ksoap2.transport.HttpTransportSE.call(HttpTransportSE.java:118) at org.ksoap2.transport.HttpTransportSE.call(HttpTransportSE.java:113) at com.compete.WebServiceCallTask.getQuestion(WebServiceCallTask.java:114) at com.compete.WebServiceCallTask.doInBackground(WebServiceCallTask.java:53) at com.compete.WebServiceCallTask.doInBackground(WebServiceCallTask.java:1) at android.os.AsyncTask$2.call(AsyncTask.java:287) at java.util.concurrent.FutureTask.run(FutureTask.java:234) at android.os.AsyncTask$SerialExecutor$1.run(AsyncTask.java:230) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1080) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:573) at java.lang.Thread.run(Thread.java:856) Appreciate if any one can point me to an sample code or can direct me what is the issue. Thanks.

    Read the article

  • What is optimal hardware configuration for heavy load LAMP application

    - by Piotr Kochanski
    I need to run Linux-Apache-PHP-MySQL application (Moodle e-learning platform) for a large number of concurrent users - I am aiming 5000 users. By concurrent I mean that 5000 people should be able to work with the application at the same time. "Work" means not only do database reads but writes as well. The application is not very typical, since it is doing a lot of inserts/updates on the database, so caching techniques are not helping to much. We are using InnoDB storage engine. In addition application is not written with performance in mind. For instance one Apache thread usually occupies about 30-50 MB of RAM. I would be greatful for information what hardware is needed to build scalable configuration that is able to handle this kind of load. We are using right now two HP DLG 380 with two 4 core processors which are able to handle much lower load (typically 300-500 concurrent users). Is it reasonable to invest in this kind of boxes and build cluster using them or is it better to go with some more high-end hardware? I am particularly curious how many and how powerful servers are needed (number of processors/cores, size of RAM) what network equipment should be used (what kind of switches, network cards) any other hardware, like particular disc storage solutions, etc, that are needed Another thing is how to put together everything, that is what is the most optimal architecture. Clustering with MySQL is rather hard (people are complaining about MySQL Cluster, even here on Stackoverflow).

    Read the article

  • g-wan - reproducing the performance claims

    - by user2603628
    Using gwan_linux64-bit.tar.bz2 under Ubuntu 12.04 LTS unpacking and running gwan then pointing wrk at it (using a null file null.html) wrk --timeout 10 -t 2 -c 100 -d20s http://127.0.0.1:8080/null.html Running 20s test @ http://127.0.0.1:8080/null.html 2 threads and 100 connections Thread Stats Avg Stdev Max +/- Stdev Latency 11.65s 5.10s 13.89s 83.91% Req/Sec 3.33k 3.65k 12.33k 75.19% 125067 requests in 20.01s, 32.08MB read Socket errors: connect 0, read 37, write 0, timeout 49 Requests/sec: 6251.46 Transfer/sec: 1.60MB .. very poor performance, in fact there seems to be some kind of huge latency issue. During the test gwan is 200% busy and wrk is 67% busy. Pointing at nginx, wrk is 200% busy and nginx is 45% busy: wrk --timeout 10 -t 2 -c 100 -d20s http://127.0.0.1/null.html Thread Stats Avg Stdev Max +/- Stdev Latency 371.81us 134.05us 24.04ms 91.26% Req/Sec 72.75k 7.38k 109.22k 68.21% 2740883 requests in 20.00s, 540.95MB read Requests/sec: 137046.70 Transfer/sec: 27.05MB Pointing weighttpd at nginx gives even faster results: /usr/local/bin/weighttp -k -n 2000000 -c 500 -t 3 http://127.0.0.1/null.html weighttp - a lightweight and simple webserver benchmarking tool starting benchmark... spawning thread #1: 167 concurrent requests, 666667 total requests spawning thread #2: 167 concurrent requests, 666667 total requests spawning thread #3: 166 concurrent requests, 666666 total requests progress: 9% done progress: 19% done progress: 29% done progress: 39% done progress: 49% done progress: 59% done progress: 69% done progress: 79% done progress: 89% done progress: 99% done finished in 7 sec, 13 millisec and 293 microsec, 285172 req/s, 57633 kbyte/s requests: 2000000 total, 2000000 started, 2000000 done, 2000000 succeeded, 0 failed, 0 errored status codes: 2000000 2xx, 0 3xx, 0 4xx, 0 5xx traffic: 413901205 bytes total, 413901205 bytes http, 0 bytes data The server is a virtual 8 core dedicated server (bare metal), under KVM Where do I start looking to identify the problem gwan is having on this platform ? I have tested lighttpd, nginx and node.js on this same OS, and the results are all as one would expect. The server has been tuned in the usual way with expanded ephemeral ports, increased ulimits, adjusted time wait recycling etc.

    Read the article

  • Cannot install virtualbox-ose-guest-dkms on Ubuntu 10.04

    - by mrduongnv
    I'm using Ubuntu 10.04 and kernel: 2.6.38-11-generic-pae. While using VirtualBox, i got this error: Kernel driver not installed (rc=-1908) Please install the virtualbox-ose-dkms package and execute 'modprobe vboxdrv' as root. I tried to execute the command: sudo modprobe vboxdrv and got this error: FATAL: Module vboxdrv not found. After that, i execute this: sudo aptitude install virtualbox-ose-guest-dkms duongnv@duongnv-laptop:~$ sudo aptitude install virtualbox-ose-guest-dkms Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done The following partially installed packages will be configured: virtualbox-ose-guest-dkms 0 packages upgraded, 0 newly installed, 0 to remove and 105 not upgraded. Need to get 0B of archives. After unpacking 0B will be used. Writing extended state information... Done Setting up virtualbox-ose-guest-dkms (3.1.6-dfsg-2ubuntu2) ... Removing old virtualbox-ose-guest-3.1.6 DKMS files... ------------------------------ Deleting module version: 3.1.6 completely from the DKMS tree. ------------------------------ Done. Loading new virtualbox-ose-guest-3.1.6 DKMS files... First Installation: checking all kernels... Building only for 2.6.38-11-generic-pae Building for architecture i686 Building initial module for 2.6.38-11-generic-pae Error! Bad return status for module build on kernel: 2.6.38-11-generic-pae (i686) Consult the make.log in the build directory /var/lib/dkms/virtualbox-ose-guest/3.1.6/build/ for more information. dpkg: error processing virtualbox-ose-guest-dkms (--configure): subprocess installed post-installation script returned error exit status 10 Errors were encountered while processing: virtualbox-ose-guest-dkms E: Sub-process /usr/bin/dpkg returned an error code (1) A package failed to install. Trying to recover: Setting up virtualbox-ose-guest-dkms (3.1.6-dfsg-2ubuntu2) ... Removing old virtualbox-ose-guest-3.1.6 DKMS files... ------------------------------ Deleting module version: 3.1.6 completely from the DKMS tree. ------------------------------ Done. Loading new virtualbox-ose-guest-3.1.6 DKMS files... First Installation: checking all kernels... Building only for 2.6.38-11-generic-pae Building for architecture i686 Building initial module for 2.6.38-11-generic-pae Error! Bad return status for module build on kernel: 2.6.38-11-generic-pae (i686) Consult the make.log in the build directory /var/lib/dkms/virtualbox-ose-guest/3.1.6/build/ for more information. dpkg: error processing virtualbox-ose-guest-dkms (--configure): subprocess installed post-installation script returned error exit status 10 Errors were encountered while processing: virtualbox-ose-guest-dkms Reading package lists... Done Building dependency tree Reading state information... Done Reading extended state information Initializing package states... Done

    Read the article

  • Apache2 benchmarks - very poor performance

    - by andrzejp
    I have two servers on which I test the configuration of apache2. The first server: 4GB of RAM, AMD Athlon (tm) 64 X2 Dual Core Processor 5600 + Apache 2.2.3, mod_php, mpm prefork: Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 150 KeepAliveTimeout 4 <IfModule Mpm_prefork_module> StartServers 7 MinSpareServers 15 MaxSpareServers 30 MaxClients 250 MaxRequestsPerChild 2000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c prefork.c http_core.c mod_so.c Second server: 8GB of RAM, Intel (R) Core (TM) i7 CPU [email protected] Apache 2.2.9, **fcgid, mpm worker, suexec** PHP scripts are running via fcgi-wrapper Settings: Timeout 100 KeepAlive On MaxKeepAliveRequests 100 KeepAliveTimeout 4 <IfModule Mpm_worker_module> StartServers 10 MaxClients 200 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 1000 </ IfModule> Compiled in modules: core.c mod_log_config.c mod_logio.c worker.c http_core.c mod_so.c The following test results, which are very strange! New server (dynamic content - php via fcgid+suexec): Server Software: Apache/2.2.9 Server Hostname: XXXXXXXX Server Port: 80 Document Path: XXXXXXX Document Length: 179512 bytes Concurrency Level: 10 Time taken for tests: 0.26276 seconds Complete requests: 1000 Failed requests: 0 Total transferred: 179935000 bytes HTML transferred: 179512000 bytes Requests per second: 38.06 Transfer rate: 6847.88 kb/s received Connnection Times (ms) min avg max Connect: 2 4 54 Processing: 161 257 449 Total: 163 261 503 Old server (dynamic content - mod_php): Server Software: Apache/2.2.3 Server Hostname: XXXXXX Server Port: 80 Document Path: XXXXXX Document Length: 187537 bytes Concurrency Level: 10 Time taken for tests: 173.073 seconds Complete requests: 1000 Failed requests: 22 (Connect: 0, Length: 22, Exceptions: 0) Total transferred: 188003372 bytes HTML transferred: 187546372 bytes Requests per second: 5777.91 Transfer rate: 1086267.40 kb/s received Connnection Times (ms) min avg max Connect: 3 3 28 Processing: 298 1724 26615 Total: 301 1727 26643 Old server: Static content (jpg file) Server Software: Apache/2.2.3 Server Hostname: xxxxxxxxx Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.558 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 40864400 bytes HTML transferred: 40557482 bytes Requests per second: 281.09 [#/sec] (mean) Time per request: 355.753 [ms] (mean) Time per request: 3.558 [ms] (mean, across all concurrent requests) Transfer rate: 11217.51 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 3 11 4.5 12 23 Processing: 40 329 61.4 339 1009 Waiting: 6 282 55.2 293 737 Total: 43 340 63.0 351 1020 New server - static content (jpg file) Server Software: Apache/2.2.9 Server Hostname: XXXXX Server Port: 80 Document Path: /images/top2.gif Document Length: 40486 bytes Concurrency Level: 100 Time taken for tests: 3.571531 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 41282792 bytes HTML transferred: 41030080 bytes Requests per second: 279.99 [#/sec] (mean) Time per request: 357.153 [ms] (mean) Time per request: 3.572 [ms] (mean, across all concurrent requests) Transfer rate: 11287.88 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 2 63 24.8 66 119 Processing: 124 278 31.8 282 391 Waiting: 3 70 28.5 66 164 Total: 126 341 35.9 350 443 I noticed that in the apache error.log is a lot of entries: [notice] mod_fcgid: call /www/XXXXX/public_html/forum/index.php with wrapper /www/php-fcgi-scripts/XXXXXX/php-fcgi-starter What I have omitted, or do not understand? Such a difference in requests per second? Is it possible? What could be the cause?

    Read the article

  • Will An External Audio Interface Reduce CPU Load?

    - by Yar
    I am considering buying a very-low-latency audio interface like this one. One question is if it will reduce CPU load (I'm at about 60%+ and my Macbook has 2.4ghz and 4gigs ram) during intensive audio processing. If the answer is "yes," how will it compare to a different, cheaper firewire audio interface? My thought is that offloading the processing is always the same gain, regardless.

    Read the article

  • Why does SQL 2005 SSIS component install fail?

    - by Ducain
    I am trying to install SSIS on our production SQL 2005 SP2 box. Each time I try, the install/setup screen results in failure, starting with the native client, and moving on down. Screen shots below show what I see: Here is the result of clicking on the status link to the right of the native client after the install failed: === Verbose logging started: 3/28/2012 16:38:08 Build type: SHIP UNICODE 3.01.4000.4042 Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe === MSI (c) (DC:00) [16:38:08:875]: Resetting cached policy values MSI (c) (DC:00) [16:38:08:875]: Machine policy value 'Debug' is 0 MSI (c) (DC:00) [16:38:08:875]: ******* RunEngine: ******* Product: {F9B3DD02-B0B3-42E9-8650-030DFF0D133D} ******* Action: ******* CommandLine: ********** MSI (c) (DC:00) [16:38:08:875]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (DC:00) [16:38:08:875]: Grabbed execution mutex. MSI (c) (DC:00) [16:38:08:875]: Cloaking enabled. MSI (c) (DC:00) [16:38:08:875]: Attempting to enable all disabled priveleges before calling Install on Server MSI (c) (DC:00) [16:38:08:875]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (90:F0) [16:38:08:875]: Grabbed execution mutex. MSI (s) (90:D4) [16:38:08:875]: Resetting cached policy values MSI (s) (90:D4) [16:38:08:875]: Machine policy value 'Debug' is 0 MSI (s) (90:D4) [16:38:08:875]: ******* RunEngine: ******* Product: {F9B3DD02-B0B3-42E9-8650-030DFF0D133D} ******* Action: ******* CommandLine: ********** MSI (s) (90:D4) [16:38:08:875]: Machine policy value 'DisableUserInstalls' is 0 MSI (s) (90:D4) [16:38:08:890]: Warning: Local cached package 'C:\WINDOWS\Installer\65eb99.msi' is missing. MSI (s) (90:D4) [16:38:08:890]: User policy value 'SearchOrder' is 'nmu' MSI (s) (90:D4) [16:38:08:890]: User policy value 'DisableMedia' is 0 MSI (s) (90:D4) [16:38:08:890]: Machine policy value 'AllowLockdownMedia' is 0 MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Media enabled only if package is safe. MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Looking for sourcelist for product {F9B3DD02-B0B3-42E9-8650-030DFF0D133D} MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Adding {F9B3DD02-B0B3-42E9-8650-030DFF0D133D}; to potential sourcelist list (pcode;disk;relpath). MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Now checking product {F9B3DD02-B0B3-42E9-8650-030DFF0D133D} MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Media is enabled for product. MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Attempting to use LastUsedSource from source list. MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Trying source C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\Cache\. MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Source is invalid due to invalid package code (product code doesn't match). MSI (s) (90:D4) [16:38:08:890]: Note: 1: 1706 2: -2147483646 3: sqlncli.msi MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Processing net source list. MSI (s) (90:D4) [16:38:08:890]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi MSI (s) (90:D4) [16:38:08:890]: SOURCEMGMT: Processing media source list. MSI (s) (90:D4) [16:38:09:921]: SOURCEMGMT: Trying media source F:\. MSI (s) (90:D4) [16:38:09:921]: Note: 1: 2203 2: F:\sqlncli.msi 3: -2147287038 MSI (s) (90:D4) [16:38:09:921]: SOURCEMGMT: Source is invalid due to missing/inaccessible package. MSI (s) (90:D4) [16:38:09:921]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi MSI (s) (90:D4) [16:38:09:921]: SOURCEMGMT: Processing URL source list. MSI (s) (90:D4) [16:38:09:921]: Note: 1: 1402 2: UNKNOWN\URL 3: 2 MSI (s) (90:D4) [16:38:09:921]: Note: 1: 1706 2: -2147483647 3: sqlncli.msi MSI (s) (90:D4) [16:38:09:921]: Note: 1: 1706 2: 3: sqlncli.msi MSI (s) (90:D4) [16:38:09:921]: SOURCEMGMT: Failed to resolve source MSI (s) (90:D4) [16:38:09:921]: MainEngineThread is returning 1612 MSI (c) (DC:00) [16:38:09:921]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (DC:00) [16:38:09:921]: MainEngineThread is returning 1612 === Verbose logging stopped: 3/28/2012 16:38:09 === Here is the log visible when I click the failed status for MSXML6: === Verbose logging started: 3/28/2012 16:38:12 Build type: SHIP UNICODE 3.01.4000.4042 Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe === MSI (c) (DC:58) [16:38:12:250]: Resetting cached policy values MSI (c) (DC:58) [16:38:12:250]: Machine policy value 'Debug' is 0 MSI (c) (DC:58) [16:38:12:250]: ******* RunEngine: ******* Product: {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA} ******* Action: ******* CommandLine: ********** MSI (c) (DC:58) [16:38:12:250]: Client-side and UI is none or basic: Running entire install on the server. MSI (c) (DC:58) [16:38:12:250]: Grabbed execution mutex. MSI (c) (DC:58) [16:38:12:250]: Cloaking enabled. MSI (c) (DC:58) [16:38:12:250]: Attempting to enable all disabled priveleges before calling Install on Server MSI (c) (DC:58) [16:38:12:250]: Incrementing counter to disable shutdown. Counter after increment: 0 MSI (s) (90:58) [16:38:12:265]: Grabbed execution mutex. MSI (s) (90:DC) [16:38:12:265]: Resetting cached policy values MSI (s) (90:DC) [16:38:12:265]: Machine policy value 'Debug' is 0 MSI (s) (90:DC) [16:38:12:265]: ******* RunEngine: ******* Product: {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA} ******* Action: ******* CommandLine: ********** MSI (s) (90:DC) [16:38:12:265]: Machine policy value 'DisableUserInstalls' is 0 MSI (s) (90:DC) [16:38:12:265]: Warning: Local cached package 'C:\WINDOWS\Installer\ce6d56e.msi' is missing. MSI (s) (90:DC) [16:38:12:265]: User policy value 'SearchOrder' is 'nmu' MSI (s) (90:DC) [16:38:12:265]: User policy value 'DisableMedia' is 0 MSI (s) (90:DC) [16:38:12:265]: Machine policy value 'AllowLockdownMedia' is 0 MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Media enabled only if package is safe. MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Looking for sourcelist for product {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA} MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Adding {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA}; to potential sourcelist list (pcode;disk;relpath). MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Now checking product {56EA8BC0-3751-4B93-BC9D-6651CC36E5AA} MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Media is enabled for product. MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Attempting to use LastUsedSource from source list. MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Trying source d:\2a2ac35788eea9066bae01\. MSI (s) (90:DC) [16:38:12:265]: Note: 1: 2203 2: d:\2a2ac35788eea9066bae01\msxml6.msi 3: -2147287037 MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Source is invalid due to missing/inaccessible package. MSI (s) (90:DC) [16:38:12:265]: Note: 1: 1706 2: -2147483647 3: msxml6.msi MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Processing net source list. MSI (s) (90:DC) [16:38:12:265]: Note: 1: 1706 2: -2147483647 3: msxml6.msi MSI (s) (90:DC) [16:38:12:265]: SOURCEMGMT: Processing media source list. MSI (s) (90:DC) [16:38:12:296]: SOURCEMGMT: Trying media source F:\. MSI (s) (90:DC) [16:38:12:296]: Note: 1: 2203 2: F:\msxml6.msi 3: -2147287038 MSI (s) (90:DC) [16:38:12:296]: SOURCEMGMT: Source is invalid due to missing/inaccessible package. MSI (s) (90:DC) [16:38:12:296]: Note: 1: 1706 2: -2147483647 3: msxml6.msi MSI (s) (90:DC) [16:38:12:296]: SOURCEMGMT: Processing URL source list. MSI (s) (90:DC) [16:38:12:296]: Note: 1: 1402 2: UNKNOWN\URL 3: 2 MSI (s) (90:DC) [16:38:12:296]: Note: 1: 1706 2: -2147483647 3: msxml6.msi MSI (s) (90:DC) [16:38:12:296]: Note: 1: 1706 2: 3: msxml6.msi MSI (s) (90:DC) [16:38:12:296]: SOURCEMGMT: Failed to resolve source MSI (s) (90:DC) [16:38:12:296]: MainEngineThread is returning 1612 MSI (c) (DC:58) [16:38:12:296]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1 MSI (c) (DC:58) [16:38:12:296]: MainEngineThread is returning 1612 === Verbose logging stopped: 3/28/2012 16:38:12 === When I click on the failed status for SSIS, no log file appears at all. To be honest, I'm not even sure where to start on this one - never guessed it would be so much trouble to add a component right from the disk. Any help or pointers whatsoever would be greatly appreciated. If any more details are needed, please ask - I'd be glad to add them.

    Read the article

  • Bind9 wont start on ubuntu 9.10

    - by Logikdev
    Ever since i've upgraded to ubuntu 9.10, bind9 wont start: Setting up bind9 (1:9.6.1.dfsg.P1-3ubuntu0.2) ... * Starting domain name service... bind9 [fail] invoke-rc.d: initscript bind9, action "start" failed. dpkg: error processing bind9 (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: bind9 E: Sub-process /usr/bin/dpkg returned an error code (1) Any ideas?

    Read the article

  • ubuntu 10.04 - install-info error during update

    - by beemzet
    Hi all, I'm using ubuntu 10.04 beta 1. when I try to update & upgrade I get the following error: *Setting up install-info (4.13a.dfsg.1-5ubuntu1) ... /etc/environment: line 4: LC-ALL=en_US.UTF-8: command not found dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: install-info* Anyone knows how to fix this? Thanks

    Read the article

  • Running multiple FCGI/Django on Nginx for load sharing

    - by Barry
    I am running a web-service on Nginx/FastCGI/Django. Our processing time is fairly long and CPU intensive and I would like to be able to run multiple processes of Django/FastCGI to share the load. How do I set Nginx to rout requests from a single source to multiple instances of Django/FastCGI? (I can run the multiple instances on multiple ports/sockets, but I don't know how to make Nginx share the processing load between them.) Any help much appreciated.

    Read the article

  • What the best way to achieve RPO of zero and lowest possible RTO (less than 15 minutes) with SQL 2008 R2?

    - by Adrian Hope-Bailie
    We are running a payments (EFT transaction processing) application which is processing high volumes of transactions 24/7 and are currently investigating a better way of doing DB replication to our disaster recovery site. Our current and previous strategies have included using both DoubleTake and Redgate to replicate data to a warm stand-by. DoubleTake is the supported solution from the payments software vendor however their (DoubleTake's) support in South Africa is very poor. We had a few issues and simply couldn't ever resolve them so we had to give up on DoubleTake. We have been using Redgate to manually read the data from the primary site (via queries) and write to the DR site but this is: A bad solution Getting the software vendor hot and bothered whenever we have support issues as it has a tendency to interfere with the payment application which is very DB intensive. We recently upgraded the whole system to run on SQL 2008 R2 Enterprise which means we should probably be looking at using some of the built-in replication features. The server has 2 fairly large databases with a mixture of tables containing highly volatile transactional data and pretty static configuration data. Replication would be done over a WAN link to a separate physical site and needs to achieve the following objectives. RPO: Zero loss - This is transactional data with financial impact so we can't lose anything. RTO: Tending to zero - The business depends on our ability to process transactions every minute we are down we are losing money I have looked at a few of the other questions/answers but none meet our case exactly: SQL Server 2008 failover strategy - Log shipping or replication? How to achieve the following RTO & RPO with logshipping only using SQL Server? What is the best of two approaches to achieve DB Replication? My current thinking is that we should use mirroring but I am concerned that for RPO:0 we will need to do delayed commits and this could impact the performance of the primary DB which is not an option. Our current DR process is to: Stop incoming traffic to the primary site and allow all in-flight transaction to complete. Allow the replication to DR to complete. Change network routing to route to DR site. Start all applications and services on the secondary site (Ideally we can change this to a warmer stand-by whereby the applications are already running but not processing any transactions). In other words the DR database needs to, as quickly as possible, catch up with primary and be ready for processing as the new primary. We would then need to be able to reverse this when we are ready to switch back. Is there a better option than mirroring (should we be doing log-shipping too) and can anyone suggest other considerations that we should keep in mind?

    Read the article

  • Ubuntu 10.04 - install-info error during update

    - by user33684
    I'm using Ubuntu 10.04 beta 1. When I try to update & upgrade I get the following error: Setting up install-info (4.13a.dfsg.1-5ubuntu1) ... /etc/environment: line 4: LC-ALL=en_US.UTF-8: command not found dpkg: error processing install-info (--configure): subprocess installed post-installation script returned error exit status 127 Errors were encountered while processing: install-info Does anyone know how to fix this? Thanks

    Read the article

  • Nginx rewrites - When does one use the break flag (pattern target break)?

    - by anonymous-one
    The nginx wiki states: break - completes processing of current rewrite directives and non-rewrite processing continues within the current location block only. Is this to say that: If the rewrite pattern matches, process the rewrite (rewrite to target) but do not process any of the other rules in the location block, and process all other (cache, proxy, etc) directives in the location block? I am talking about the break flag as per: PATTERN TARGET FLAG Not the "break;" directive. Thanks.

    Read the article

< Previous Page | 77 78 79 80 81 82 83 84 85 86 87 88  | Next Page >